pool files no longer needed

git-svn-id: svn://tug.org/texlive/trunk@8714 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 0 insertions, 1316 deletions

diff --git a/Master/texmf/web2c/xetex.pool b/Master/texmf/web2c/xetex.pool
deleted file mode 100644
index bab47a43312..00000000000
--- a/Master/texmf/web2c/xetex.pool
+++ /dev/null
@@ -1,1316 +0,0 @@
-02.2
-04.996
-11buffer size
-09pool size
-17number of strings
-03???
-13m2d5c2l5x2v5i
-28End of file on the terminal!
-02! 
-42(That makes 100 errors; please try again.)
-02? 
-60Type <return> to proceed, S to scroll future error messages,
-44R to run without stopping, Q to run quietly,
-23I to insert something, 
-20E to edit your file,
-561 or ... or 9 to ignore the next 1 to 9 tokens of input,
-22H for help, X to quit.
-13OK, entering 
-09batchmode
-11nonstopmode
-10scrollmode
-03...
-07insert>
-44I have just deleted some text, as you asked.
-48You can now delete more, or insert, or whatever.
-50Sorry, I don't know how to help in this situation.
-36Maybe you should try asking a human?
-42Sorry, I already gave what help I could...
-59An error might have occurred before I noticed any problems.
-45``If all else fails, read the instructions.''
-02 (
-14Emergency stop
-30TeX capacity exceeded, sorry [
-44If you really absolutely need more capacity,
-35you can ask a wizard to enlarge me.
-19This can't happen (
-59I'm broken. Please show this to someone who can fix can fix
-35I can't go on meeting you like this
-55One of your faux pas seems to have wounded me deeply...
-59in fact, I'm barely conscious. Please fix it and try again.
-12Interruption
-09You rang?
-60Try to insert some instructions for me (e.g.,`I\showlists'),
-43unless you just want to quit by typing `X'.
-16main memory size
-24AVAIL list clobbered at 
-31Double-AVAIL list clobbered at 
-24Doubly free location at 
-12Bad flag at 
-14New busy locs:
-05LINK(
-05INFO(
-02[]
-10CLOBBERED.
-04foul
-03fil
-06 plus 
-07 minus 
-03 []
-26Bad link, display aborted.
-04etc.
-18Unknown node type!
-05unset
-04box(
-02)x
-10, shifted 
-09 columns)
-10, stretch 
-09, shrink 
-11, glue set 
-02- 
-03< -
-05rule(
-06insert
-15, natural size 
-08; split(
-14); float cost 
-04glue
-09nonscript
-05mskip
-02mu
-00
-08leaders 
-04kern
-13 (for accent)
-05mkern
-03end
-05begin
-04math
-02on
-03off
-13, surrounded 
-11 (ligature 
-08penalty 
-13discretionary
-11 replacing 
-04mark
-07vadjust
-08flushing
-07copying
-13vertical mode
-15horizontal mode
-17display math mode
-07no mode
-22internal vertical mode
-26restricted horizontal mode
-09math mode
-18' in vertical mode
-20' in horizontal mode
-22' in display math mode
-12' in no mode
-27' in internal vertical mode
-31' in restricted horizontal mode
-14' in math mode
-18semantic nest size
-04### 
-17 entered at line 
-10 (language
-10:hyphenmin
-18 (\output routine)
-25### recent contributions:
-10prevdepth 
-07ignored
-11, prevgraf 
-06 lines
-05 line
-12spacefactor 
-19, current language 
-28this will be denominator of:
-08lineskip
-12baselineskip
-07parskip
-16abovedisplayskip
-16belowdisplayskip
-21abovedisplayshortskip
-21belowdisplayshortskip
-08leftskip
-09rightskip
-07topskip
-12splittopskip
-07tabskip
-09spaceskip
-10xspaceskip
-11parfillskip
-18XeTeXlinebreakskip
-10thinmuskip
-09medmuskip
-11thickmuskip
-25[unknown glue parameter!]
-04skip
-06muskip
-02pt
-06output
-08everypar
-09everymath
-12everydisplay
-09everyhbox
-09everyvbox
-08everyjob
-07everycr
-07errhelp
-04toks
-04ETC.
-03box
-04void
-12current font
-08textfont
-10scriptfont
-16scriptscriptfont
-07catcode
-06lccode
-06uccode
-06sfcode
-08mathcode
-12pretolerance
-09tolerance
-11linepenalty
-13hyphenpenalty
-15exhyphenpenalty
-11clubpenalty
-12widowpenalty
-19displaywidowpenalty
-13brokenpenalty
-12binoppenalty
-10relpenalty
-17predisplaypenalty
-18postdisplaypenalty
-16interlinepenalty
-20doublehyphendemerits
-19finalhyphendemerits
-11adjdemerits
-03mag
-15delimiterfactor
-09looseness
-04time
-03day
-05month
-04year
-14showboxbreadth
-12showboxdepth
-08hbadness
-08vbadness
-07pausing
-13tracingonline
-13tracingmacros
-12tracingstats
-17tracingparagraphs
-12tracingpages
-13tracingoutput
-16tracinglostchars
-15tracingcommands
-15tracingrestores
-06uchyph
-13outputpenalty
-13maxdeadcycles
-09hangafter
-15floatingpenalty
-10globaldefs
-03fam
-10escapechar
-17defaulthyphenchar
-15defaultskewchar
-11endlinechar
-11newlinechar
-08language
-13lefthyphenmin
-14righthyphenmin
-14holdinginserts
-17errorcontextlines
-21XeTeXlinebreakpenalty
-13charsubdefmin
-13charsubdefmax
-17tracingcharsubdef
-28[unknown integer parameter!]
-05count
-07delcode
-09parindent
-12mathsurround
-13lineskiplimit
-05hsize
-05vsize
-08maxdepth
-13splitmaxdepth
-11boxmaxdepth
-05hfuzz
-05vfuzz
-18delimitershortfall
-18nulldelimiterspace
-11scriptspace
-14predisplaysize
-12displaywidth
-13displayindent
-12overfullrule
-10hangindent
-07hoffset
-07voffset
-16emergencystretch
-12pdfpagewidth
-13pdfpageheight
-26[unknown dimen parameter!]
-05dimen
-06EQUIV(
-12notexpanded:
-09hash size
-06csname
-09endcsname
-11IMPOSSIBLE.
-12NONEXISTENT.
-06accent
-07advance
-15afterassignment
-10aftergroup
-10begingroup
-04char
-09delimiter
-14XeTeXdelimiter
-06divide
-08endgroup
-11expandafter
-04font
-09fontdimen
-06halign
-05hrule
-12ignorespaces
-10mathaccent
-15XeTeXmathaccent
-08mathchar
-16XeTeXmathcharnum
-13XeTeXmathchar
-10mathchoice
-08multiply
-07noalign
-10noboundary
-08noexpand
-04omit
-08parshape
-07penalty
-08prevgraf
-07radical
-12XeTeXradical
-04read
-05relax
-06setbox
-03the
-06valign
-07vcenter
-05vrule
-09save size
-15grouping levels
-11reassigning
-08changing
-04into
-17globally changing
-08curlevel
-09retaining
-09restoring
-05SAVE(
-28Incompatible magnification (
-02);
-36 the previous value will be retained
-58I can handle only one magnification ratio per job. So I've
-59reverted to the magnification you used earlier on this run.
-46Illegal magnification has been changed to 1000
-52The magnification ratio must be between 1 and 32768.
-04BAD.
-02->
-22begin-group character 
-20end-group character 
-21math shift character 
-26macro parameter character 
-22superscript character 
-20subscript character 
-25end of alignment template
-12blank space 
-11the letter 
-14the character 
-23[unknown command code!]
-02: 
-07(level 
-18Runaway definition
-16Runaway argument
-16Runaway preamble
-12Runaway text
-03<*>
-09<insert> 
-06<read 
-02l.
-11<argument> 
-11<template> 
-16<recently read> 
-19<to be read again> 
-16<inserted text> 
-09<output> 
-11<everypar> 
-12<everymath> 
-15<everydisplay> 
-12<everyhbox> 
-12<everyvbox> 
-11<everyjob> 
-10<everycr> 
-07<mark> 
-11<everyeof> 
-08<write> 
-16input stack size
-05write
-48(interwoven alignment preambles are not allowed)
-17text input levels
-03par
-11Incomplete 
-34; all text was ignored after line 
-54A forbidden control sequence occurred in skipped text.
-59This kind of error happens when you say `\if...' and forget
-59the matching `\fi'. I've inserted a `\fi'; this might work.
-53The file ended while I was skipping conditional text.
-10File ended
-32Forbidden control sequence found
-04 of 
-46I suspect you have forgotten a `}', causing me
-41to read past where you wanted me to stop.
-49I'll try to recover; but if the error is serious,
-51you'd better type `E' or `X' now and fix your file.
-26 while scanning definition
-19 while scanning use
-24 while scanning preamble
-20 while scanning text
-39Text line contains an invalid character
-53A funny symbol that I can't read has just been input.
-48Continue, and I'll forget that it ever happened.
-37(Please type a command or say `\end')
-38*** (job aborted, no legal \end found)
-02=>
-26Undefined control sequence
-47The control sequence at the end of the top line
-52of your error message was never \def'ed. If you have
-55misspelled it (e.g., `\hobx'), type `I' and the correct
-51spelling (e.g., `I\hbox'). Otherwise just continue,
-45and I'll forget about whatever was undefined.
-08Missing 
-09 inserted
-53The control sequence marked <to be read again> should
-42not appear between \csname and \endcsname.
-05input
-08endinput
-07topmark
-09firstmark
-07botmark
-14splitfirstmark
-12splitbotmark
-20parameter stack size
-12Argument of 
-15 has an extra }
-58I've run across a `}' that doesn't seem to match anything.
-52For example, `\def\a#1{...}' and `\a}' would produce
-54this error. If you simply proceed now, the `\par' that
-52I've just inserted will cause me to report a runaway
-54argument that might be the root of the problem. But if
-57your `}' was spurious, just type `2' and it will go away.
-23Paragraph ended before 
-13 was complete
-58I suspect you've forgotten a `}', causing me to apply this
-54control sequence to too much text. How can we recover?
-59My plan is to forget the whole thing and hope for the best.
-07Use of 
-29 doesn't match its definition
-54If you say, e.g., `\def\a1{...}', then you must always
-52put `1' after `\a', since control sequence names are
-52made up of letters only. The macro here has not been
-51followed by the required stuff, so I'm ignoring it.
-02<-
-18Missing { inserted
-52A left brace was mandatory here, so I've put one in.
-55You might want to delete and/or insert some corrections
-48so that I will find a matching right brace soon.
-54(If you're confused by all this, try typing `I}' now.)
-23Incompatible glue units
-52I'm going to assume that 1mu=1pt when they're mixed.
-36Can't use \XeTeXmathcode as a number
-62\XeTeXmathcode is for setting a mathcode from separate values;
-54use \XeTeXmathcodenum to access them as single values.
-35Can't use \XeTeXdelcode as a number
-60\XeTeXdelcode is for setting a delcode from separate values;
-53use \XeTeXdelcodenum to access them as single values.
-34Extended mathchar used as mathchar
-46A mathchar number must be between 0 and "7FFF.
-27I changed this one to zero.
-32Extended delcode used as delcode
-48A delimiter code must be between 0 and "7FFFFFF.
-31Missing number, treated as zero
-47A number should have been here; I inserted `0'.
-54(If you can't figure out why I needed to see a number,
-51look up `weird error' in the index to The TeXbook.)
-11spacefactor
-09prevdepth
-10deadcycles
-15insertpenalties
-02wd
-02ht
-02dp
-11lastpenalty
-08lastkern
-08lastskip
-11inputlineno
-07badness
-09Improper 
-54You can refer to \spacefactor only in horizontal mode;
-54you can refer to \prevdepth only in vertical mode; and
-48neither of these is meaningful inside \write. So
-52I'm forgetting what you said and using zero instead.
-15You can't use `
-08' after 
-17Bad register code
-46An insertion number must be between 0 and 255.
-12Bad USV code
-53A Unicode Scalar Value must be between 0 and "10FFFF.
-18Bad character code
-47A character number must be between 0 and 65535.
-26Bad active XeTeX math code
-54Since I ignore class and family for active math chars,
-30I changed this one to "1FFFFF.
-29Bad XeTeX math character code
-58Since I expected a character number between 0 and "10FFFF,
-14Bad math class
-50Since I expected to read a number between 0 and 7,
-15Bad math family
-52Since I expected to read a number between 0 and 255,
-10Bad number
-51Since I expected to read a number between 0 and 15,
-12Bad mathchar
-46A mathchar number must be between 0 and 32767.
-18Bad delimiter code
-56A numeric delimiter code must be between 0 and 2^{27}-1.
-28Improper alphabetic constant
-56A one-character control sequence belongs after a ` mark.
-37So I'm essentially inserting \0 here.
-14Number too big
-54I can only go up to 2147483647='17777777777="7FFFFFFF,
-42so I'm using that number instead of yours.
-04true
-25Illegal unit of measure (
-18replaced by filll)
-35I dddon't go any higher than filll.
-02em
-02ex
-12mu inserted)
-48The unit of measurement in math glue must be mu.
-51To recover gracefully from this error, it's best to
-52delete the erroneous units; e.g., type `2' to delete
-45two letters. (See Chapter 27 of The TeXbook.)
-02in
-02pc
-02cm
-02mm
-02bp
-02dd
-02cc
-02sp
-12pt inserted)
-49Dimensions can be in units of em, ex, in, pt, pc,
-50cm, mm, dd, cc, bp, or sp; but yours is a new one!
-59I'll assume that you meant to say pt, for printer's points.
-19Dimension too large
-50I can't work with sizes bigger than about 19 feet.
-46Continue and I'll use the largest value I can.
-04plus
-05minus
-05width
-06height
-05depth
-06number
-12romannumeral
-06string
-07meaning
-08fontname
-07jobname
-04 at 
-60Where was the left brace? You said something like `\def\a}',
-43which I'm going to interpret as `\def\a{}'.
-32You already have nine parameters
-45I'm going to ignore the # sign you just used.
-41Parameters must be numbered consecutively
-57I've inserted the digit you should have used after the #.
-36Type `1' to delete what you did use.
-42Illegal parameter number in definition of 
-41You meant to type ## instead of #, right?
-56Or maybe a } was forgotten somewhere earlier, and things
-58are all screwed up? I'm going to assume that you meant ##.
-49*** (cannot \read from terminal in nonstop modes)
-18File ended within 
-33This \read has unbalanced braces.
-02if
-05ifcat
-05ifnum
-05ifdim
-05ifodd
-07ifvmode
-07ifhmode
-07ifmmode
-07ifinner
-06ifvoid
-06ifhbox
-06ifvbox
-03ifx
-05ifeof
-06iftrue
-07iffalse
-06ifcase
-06unless
-02fi
-02or
-04else
-06Extra 
-44I'm ignoring this; it doesn't match any \if.
-06{true}
-07{false}
-23Missing = inserted for 
-48I was expecting to see `<', `=', or `>'. Didn't.
-06{case 
-04.fmt
-15input file name
-19I can't find file `
-23I can't write on file `
-02'.
-04.tex
-20Please type another 
-45*** (job aborted, file error in nonstop mode)
-20file name for output
-04.xdv
-04.pdf
-06texput
-04.fls
-04.log
-02**
-20transcript file name
-02  
-08nullfont
-05Font 
-08 scaled 
-36 not loadable: Bad metric (TFM) file
-60 not loadable: Metric (TFM) file or installed font not found
-50I wasn't able to read the size data for this font,
-40so I will ignore the font specification.
-48[Wizards can fix TFM files using TFtoPL/PLtoTF.]
-46You might try inserting a different font spec;
-57e.g., type `I\font<same font id>=<substitute font name>'.
-39 not loadable: installed font not found
-46I wasn't able to find this font in the Mac OS,
-33 not loaded: Not enough room left
-52I'm afraid I won't be able to make use of this font,
-55because my memory for character-size data is too small.
-51If you're really stuck, ask a wizard to enlarge me.
-58Or maybe try `I\font<same font id>=<name of loaded font>'.
-23Missing font identifier
-42I was looking for a control sequence whose
-42current meaning has been defined by \font.
-10 has only 
-21 fontdimen parameters
-51To increase the number of font parameters, you must
-53use \fontdimen immediately after the \font is loaded.
-11font memory
-14 XeTeX output 
-08vlistout
-31Completed box being shipped out
-21Memory usage before: 
-08 after: 
-19; still untouched: 
-10papersize 
-31Huge page cannot be shipped out
-50The page just created is more than 18 feet tall or
-58more than 18 feet wide, so I suspect something went wrong.
-35The following box has been deleted:
-19No pages of output.
-18Output written on 
-06 pages
-05 page
-02, 
-08 bytes).
-02).
-02to
-06spread
-09Underfull
-05Loose
-16 \hbox (badness 
-38) has occurred while \output is active
-24) in paragraph at lines 
-24) in alignment at lines 
-02--
-19) detected at line 
-16Overfull \hbox (
-11pt too wide
-21Tight \hbox (badness 
-05vpack
-16 \vbox (badness 
-16Overfull \vbox (
-11pt too high
-21Tight \vbox (badness 
-02{}
-12displaystyle
-09textstyle
-11scriptstyle
-17scriptscriptstyle
-14Unknown style!
-07mathord
-06mathop
-07mathbin
-07mathrel
-08mathopen
-09mathclose
-09mathpunct
-09mathinner
-08overline
-09underline
-04left
-05right
-06middle
-06limits
-08nolimits
-20fraction, thickness 
-09= default
-17, left-delimiter 
-18, right-delimiter 
-25 is undefined (character 
-54Somewhere in the math formula just ended, you used the
-60stated character from an undefined font family. For example,
-58plain TeX doesn't allow \it or \sl in subscripts. Proceed,
-52and I'll try to forget that I needed that character.
-06mlist1
-06mlist2
-06mlist3
-640234000122*4000133**3**344*0400400*000000234000111*1111112341011
-06mlist4
-12 inside $$'s
-53Displays can use special alignments (like \eqalignno)
-57only if nothing but the alignment itself is between $$'s.
-58So I've deleted the formulas that preceded this alignment.
-04span
-02cr
-04crcr
-11endtemplate
-24alignment tab character 
-40Missing # inserted in alignment preamble
-50There should be exactly one # between &'s, when an
-56\halign or \valign is being set up. In this case you had
-47none, so I've put one in; maybe that will work.
-29Only one # is allowed per tab
-49more than one, so I'm ignoring all but the first.
-04endv
-40Extra alignment tab has been changed to 
-52You have given more \span or & marks than there were
-58in the preamble to the \halign or \valign now in progress.
-50So I'll assume that you meant to type \cr instead.
-14too many spans
-06align1
-06align0
-44Infinite glue shrinkage found in a paragraph
-52The paragraph just ended includes some glue that has
-54infinite shrinkability, e.g., `\hskip 0pt minus 1fil'.
-54Such glue doesn't belong there---it allows a paragraph
-59of any length to fit on one line. But it's safe to proceed,
-55since the offensive shrinkability has been made finite.
-06disc1a
-05disc1
-06disc2a
-05disc2
-02@@
-07: line 
-03 t=
-06 -> @@
-07 via @@
-03 b=
-03 p=
-03 d=
-10@firstpass
-11@secondpass
-14@emergencypass
-09paragraph
-06disc3a
-05disc3
-06disc4a
-05disc4
-13line breaking
-05HYPH(
-11hyphenation
-16 will be flushed
-48Hyphenation exceptions must contain only letters
-51and hyphens. But continue; I'll forgive and forget.
-12Not a letter
-50Letters in \hyphenation words must have \lccode>0.
-47Proceed; I'll ignore the character I just read.
-20exception dictionary
-18pattern memory ops
-31pattern memory ops per language
-14pattern memory
-13Too late for 
-08patterns
-53All patterns must be given before typesetting begins.
-04Bad 
-17(See Appendix H.)
-09Nonletter
-17Duplicate pattern
-07pruning
-09vertbreak
-48Infinite glue shrinkage found in box being split
-52The box you are \vsplitting contains some infinitely
-57shrinkable glue, e.g., `\vss' or `\vskip 0pt minus 1fil'.
-59Such glue doesn't belong there; but you can safely proceed,
-06vsplit
-09 needs a 
-04vbox
-44The box you are trying to split is an \hbox.
-49I can't split such a box, so I'll leave it alone.
-08pagegoal
-09pagetotal
-11pagestretch
-14pagefilstretch
-15pagefillstretch
-16pagefilllstretch
-10pageshrink
-09pagedepth
-04fill
-05filll
-17### current page:
-28 (held over for next output)
-13total height 
-13 goal height 
-06 adds 
-03, #
-12 might split
-15%% goal height=
-12, max depth=
-38Insertions can only be added to a vbox
-40Tut tut: You're trying to \insert into a
-41\box register that now contains an \hbox.
-47Proceed, and I'll discard its present contents.
-04page
-45Infinite glue shrinkage found on current page
-52The page about to be output contains some infinitely
-03 g=
-03 c=
-38Infinite glue shrinkage inserted from 
-53The correction glue for page breaking with insertions
-52must have finite shrinkability. But you may proceed,
-07% split
-04 to 
-15255 is not void
-53You shouldn't use \box255 except in \output routines.
-14Output loop---
-24 consecutive dead cycles
-57I've concluded that your \output is awry; it never does a
-55\shipout, so I'm shipping \box255 out myself. Next time
-58increase \maxdeadcycles if you want me to be more patient!
-25Unbalanced output routine
-58Your sneaky output routine has problematic {'s and/or }'s.
-41I can't handle that very well; good luck.
-33Output routine didn't use all of 
-43Your \output commands should empty \box255,
-34e.g., by saying `\shipout\box255'.
-43Proceed; I'll discard its present contents.
-18Missing $ inserted
-56I've inserted a begin-math/end-math symbol since I think
-48you left one out. Proceed, with fingers crossed.
-50Sorry, but I'm not programmed to handle this case;
-45I'll just pretend that you didn't ask for it.
-49If you're in the wrong mode, you might be able to
-58return to the right one by typing `I}' or `I$' or `I\par'.
-04dump
-05hskip
-04hfil
-05hfill
-03hss
-07hfilneg
-05vskip
-04vfil
-05vfill
-03vss
-07vfilneg
-52I've inserted something that you may have forgotten.
-32(See the <inserted text> above.)
-48With luck, this will get me unwedged. But if you
-55really didn't forget anything, try typing `2' now; then
-56my insertion and my current dilemma will both disappear.
-06right.
-58Things are pretty mixed up, but I think the worst is over.
-12Too many }'s
-42You've closed more groups than you opened.
-51Such booboos are generally harmless, so keep going.
-10rightbrace
-22Extra }, or forgotten 
-58I've deleted a group-closing symbol because it seems to be
-59spurious, as in `$x}$'. But perhaps the } is legitimate and
-59you forgot something else, as in `\hbox{$x}'. In such cases
-58the way to recover is to insert both the forgotten and the
-40deleted material, e.g., by typing `I$}'.
-08moveleft
-09moveright
-05raise
-05lower
-04copy
-07lastbox
-04vtop
-04hbox
-07shipout
-07leaders
-08cleaders
-08xleaders
-35Leaders not followed by proper glue
-56You should say `\leaders <box or rule><hskip or vskip>'.
-50I found the <box or rule>, but there's no suitable
-48<hskip or vskip>, so I'm ignoring these leaders.
-34Sorry; this \lastbox will be void.
-58Sorry...I usually can't take things from the current page.
-37This \lastbox will therefore be void.
-21Missing `to' inserted
-48I'm working on `\vsplit<box number> to <dimen>';
-31will look for the <dimen> next.
-31A <box> was supposed to be here
-57I was expecting to see \hbox or \vbox or \copy or \box or
-59something like that. So you might find something missing in
-53your output. But keep trying; you can fix this later.
-06indent
-08noindent
-26' here except with leaders
-52To put a horizontal rule in an hbox or an alignment,
-56you should use \leaders or \hrulefill (see The TeXbook).
-10You can't 
-45I'm changing to \insert0; box 255 is special.
-32Try `I\vskip-\lastskip' instead.
-31Try `I\kern-\lastkern' instead.
-46Perhaps you can make the output routine do it.
-09unpenalty
-06unkern
-06unskip
-06unhbox
-07unhcopy
-06unvbox
-07unvcopy
-34Incompatible list can't be unboxed
-35Sorry, Pandora. (You sneaky devil.)
-58I refuse to unbox an \hbox in vertical mode or vice versa.
-40And I can't open any boxes in math mode.
-13Illegal math 
-54Sorry: The third part of a discretionary break must be
-57empty, in math formulas. I had to delete your third part.
-30Discretionary list is too long
-50Wow---I never thought anybody would tweak me here.
-56You can't seriously need such a huge discretionary list?
-27Improper discretionary list
-54Discretionary lists must contain only boxes and kerns.
-53The following discretionary sublist has been deleted:
-18Missing } inserted
-45I've put in what seems to be necessary to fix
-44the current column of the current alignment.
-43Try to go on, since this might almost work.
-10Misplaced 
-55I can't figure out why you would want to use a tab mark
-50here. If you just want an ampersand, the remedy is
-52simple: Just type `I\&' now. But if some right brace
-52up above has ended a previous alignment prematurely,
-52you're probably due for more error messages, and you
-57might try typing `S' now just to see what is salvageable.
-57or \cr or \span just now. If something like a right brace
-46I expect to see \noalign only after the \cr of
-49an alignment. Proceed, and I'll ignore this case.
-56I expect to see \omit only after tab marks or the \cr of
-53I'm guessing that you meant to end an alignment here.
-50I'm ignoring this, since I wasn't doing a \csname.
-04eqno
-05leqno
-13displaylimits
-42Limit controls must follow a math operator
-57I'm ignoring this misplaced \limits or \nolimits command.
-30Missing delimiter (. inserted)
-52I was expecting to see something like `(' or `\{' or
-55`\}' here. If you typed, e.g., `{' instead of `\{', you
-57should probably delete the `{' by typing `1' now, so that
-52braces don't get unbalanced. Otherwise just proceed.
-54Acceptable delimiters are characters whose \delcode is
-58nonnegative, or you can use `\delimiter <delimiter code>'.
-11Please use 
-25 for accents in math mode
-55I'm changing \accent to \mathaccent here; wish me luck.
-59(Accents are not the same in formulas as they are in text.)
-18Double superscript
-43I treat `x^1^2' essentially like `x^1{}^2'.
-16Double subscript
-43I treat `x_1_2' essentially like `x_1{}_2'.
-05above
-04over
-04atop
-15abovewithdelims
-14overwithdelims
-14atopwithdelims
-35Ambiguous; you need another { and }
-55I'm ignoring this fraction specification, since I don't
-52know whether a construction like `x \over y \over z'
-53means `{x \over y} \over z' or `x \over {y \over z}'.
-50I'm ignoring a \middle that had no matching \left.
-49I'm ignoring a \right that had no matching \left.
-47Math formula deleted: Insufficient symbol fonts
-50Sorry, but I can't typeset math unless \textfont 2
-50and \scriptfont 2 and \scriptscriptfont 2 have all
-50the \fontdimen values needed in math symbol fonts.
-50Math formula deleted: Insufficient extension fonts
-50Sorry, but I can't typeset math unless \textfont 3
-50and \scriptfont 3 and \scriptscriptfont 3 have all
-53the \fontdimen values needed in math extension fonts.
-31Display math should end with $$
-59The `$' that I just saw supposedly matches a previous `$$'.
-49So I shall assume that you typed `$$' both times.
-07display
-19Missing $$ inserted
-04long
-05outer
-06global
-03def
-04gdef
-04edef
-04xdef
-06prefix
-29You can't use a prefix with `
-55I'll pretend you didn't say \long or \outer or \global.
-06' or `
-08' with `
-49I'll pretend you didn't say \long or \outer here.
-33Missing control sequence inserted
-52Please don't say `\def cs{...}', say `\def\cs{...}'.
-59I've inserted an inaccessible control sequence so that your
-60definition will be completed without mixing me up too badly.
-53You can recover graciously from this error, if you're
-42careful; see exercise 27.2 in The TeXbook.
-12inaccessible
-03let
-09futurelet
-07chardef
-11mathchardef
-19XeTeXmathcharnumdef
-16XeTeXmathchardef
-08countdef
-08dimendef
-07skipdef
-09muskipdef
-07toksdef
-10charsubdef
-28New character substitution: 
-03 = 
-44You should have said `\read<number> to \cs'.
-34I'm going to look for the \cs now.
-16XeTeXmathcodenum
-13XeTeXmathcode
-15XeTeXdelcodenum
-12XeTeXdelcode
-14Invalid code (
-29), should be in the range 0..
-21), should be at most 
-54I'm going to use 0 instead of that illegal code value.
-02by
-19Arithmetic overflow
-50I can't carry out that multiplication or division,
-33since the result is out of range.
-55I'm forgetting what you said and not changing anything.
-57Sorry, \setbox is not allowed after \halign in a display,
-45or between \accent and an accented character.
-16Bad space factor
-47I allow only values in the range 1..32767 here.
-37I allow only nonnegative values here.
-37Patterns can be loaded only by INITEX
-10hyphenchar
-08skewchar
-04FONT
-02at
-06scaled
-20Improper `at' size (
-21pt), replaced by 10pt
-50I can only handle fonts at positive sizes that are
-56less than 2048pt, so I've changed what you said to 10pt.
-12select font 
-13errorstopmode
-06openin
-07closein
-07message
-10errmessage
-31(That was another \errmessage.)
-50This error message was generated by an \errmessage
-43command, so I can't give any explicit help.
-54Pretend that you're Hercule Poirot: Examine all clues,
-41and deduce the truth by order and method.
-09lowercase
-09uppercase
-04show
-07showbox
-07showthe
-09showlists
-57This isn't an error message; I'm just \showing something.
-46Type `I\show...' to show more (e.g., \show\cs,
-43\showthe\count10, \showbox255, \showlists).
-54And type `I\tracingonline=1\show...' to show boxes and
-57lists on your terminal as well as in the transcript file.
-02> 
-09undefined
-09protected
-05macro
-17outer endtemplate
-06> \box
-02OK
-26 (see the transcript file)
-09 (INITEX)
-29You can't dump inside a group
-24`{...\dump}' is a no-no.
-25 strings of total length 
-43 memory locations dumped; current usage is 
-30 multiletter control sequences
-24 words of font info for 
-16 preloaded fonts
-15 preloaded font
-05\font
-48Can't \dump a format with preloaded native fonts
-41You really, really don't want to do this.
-36It won't work, and only confuses me.
-23 hyphenation exceptions
-22 hyphenation exception
-27Hyphenation trie of length 
-05 has 
-04 ops
-03 op
-08 out of 
-14 for language 
-09 (format=
-16format file name
-26Beginning to dump on file 
-22Transcript written on 
-02 )
-13end occurred 
-24inside a group at level 
-05when 
-09 on line 
-16 was incomplete)
-52(see the transcript file for additional information)
-35(\dump is performed only by INITEX)
-21debug # (-1 to exit):
-07openout
-08closeout
-07special
-09immediate
-11setlanguage
-12XeTeXpicfile
-12XeTeXpdffile
-10XeTeXglyph
-20XeTeXlinebreaklocale
-10pdfsavepos
-20[unknown extension!]
-04ext1
-12 (hyphenmin 
-09[DELETED]
-07 glyph#
-02 "
-08whatsit?
-04ext2
-04ext3
-08endwrite
-07system(
-04)...
-09clobbered
-08executed
-08disabled
-24Unbalanced write command
-59On this page there's a \write with fewer real {'s than }'s.
-04ext4
-16output file name
-08\openout
-04 = `
-16Bad glyph number
-43A glyph number must be between 0 and 65535.
-04crop
-05media
-05bleed
-04trim
-03art
-07xscaled
-07yscaled
-15Improper image 
-06size (
-19pt) will be ignored
-48I can't scale images to zero or negative sizes, 
-21so I'm ignoring this.
-07rotated
-36Unable to load picture or PDF file '
-45The requested image couldn't be read because 
-23the file was not found.
-37it was not a recognized image format.
-58Encoding mode `auto' is not valid for \XeTeXinputencoding.
-68You can't use `auto' encoding here, only for \XeTeXdefaultencoding. 
-58I'll ignore this and leave the current encoding unchanged.
-12lastnodetype
-11eTeXversion
-12eTeXrevision
-12XeTeXversion
-13XeTeXrevision
-16XeTeXcountglyphs
-20XeTeXcountvariations
-14XeTeXvariation
-24XeTeXfindvariationbyname
-17XeTeXvariationmin
-17XeTeXvariationmax
-21XeTeXvariationdefault
-18XeTeXcountfeatures
-16XeTeXfeaturecode
-22XeTeXfindfeaturebyname
-23XeTeXisexclusivefeature
-19XeTeXcountselectors
-17XeTeXselectorcode
-23XeTeXfindselectorbyname
-22XeTeXisdefaultselector
-18XeTeXvariationname
-16XeTeXfeaturename
-17XeTeXselectorname
-19XeTeXOTcountscripts
-21XeTeXOTcountlanguages
-20XeTeXOTcountfeatures
-16XeTeXOTscripttag
-18XeTeXOTlanguagetag
-17XeTeXOTfeaturetag
-14XeTeXcharglyph
-15XeTeXglyphindex
-14XeTeXglyphname
-13XeTeXfonttype
-18XeTeXfirstfontchar
-17XeTeXlastfontchar
-11pdflastxpos
-11pdflastypos
-11Cannot use 
-06 with 
-17; not an AAT font
-29; not an OpenType Layout font
-28; not a native platform font
-53Sorry, this optional e-TeX feature has been disabled.
-08everyeof
-14tracingassigns
-13tracinggroups
-10tracingifs
-17tracingscantokens
-14tracingnesting
-19predisplaydirection
-11lastlinefit
-15savingvdiscards
-15savinghyphcodes
-12bottom level
-05semi 
-06simple
-09adjusted 
-03no 
-05align
-04disc
-07 choice
-06 shift
-05 left
-14 group (level 
-09 at line 
-08leaving 
-09entering 
-17currentgrouplevel
-16currentgrouptype
-14currentiflevel
-13currentiftype
-15currentifbranch
-10fontcharwd
-10fontcharht
-10fontchardp
-10fontcharic
-14parshapelength
-14parshapeindent
-13parshapedimen
-10showgroups
-11align entry
-10showtokens
-10unexpanded
-10detokenize
-07showifs
-17 entered on line 
-22no active conditionals
-10### level 
-15interactionmode
-20Bad interaction mode
-43Modes are 0=batch, 1=nonstop, 2=scroll, and
-483=errorstop. Proceed, and I'll ignore this case.
-11TeXXeTstate
-16XeTeXupwardsmode
-20XeTeXuseglyphmetrics
-19XeTeXdashbreakstate
-18XeTeXinputencoding
-20XeTeXdefaultencoding
-06beginL
-04endL
-06beginR
-04endR
-09, display
-03LR1
-24\endL or \endR problem (
-10 missing, 
-06 extra
-03LR2
-03LR3
-03LR4
-10scantokens
-02( 
-08readline
-09ifdefined
-08ifcsname
-10iffontchar
-10' before `
-16Warning: end of 
-20 of a different file
-26Warning: end of file when 
-14 is incomplete
-07numexpr
-07dimexpr
-08glueexpr
-06muexpr
-33I can't evaluate this expression,
-33Missing ) inserted for expression
-58I was expecting to see `+', `-', `*', `/', or `)'. Didn't.
-16gluestretchorder
-15glueshrinkorder
-11gluestretch
-10glueshrink
-08mutoglue
-08gluetomu
-05marks
-08topmarks
-10firstmarks
-08botmarks
-15splitfirstmarks
-13splitbotmarks
-44A register number must be between 0 and 255.
-46A register number must be between 0 and 32767.
-03 s=
-03 a=
-12pagediscards
-13splitdiscards
-18interlinepenalties
-13clubpenalties
-14widowpenalties
-21displaywidowpenalties
-31Missing character: There is no 
-17substitution for 
-09 in font 
-17character number 
-08Unknown 
-10selector `
-06' for 
-09feature `
-11' in font `
-14Font mapping `
-12' for font `
-12' not found.
-43Missing character: Incomplete substitution 
-30Using character substitution: 
-*335076013