summaryrefslogtreecommitdiff
path: root/Master/texmf-dist
diff options
context:
space:
mode:
authorNorbert Preining <preining@logic.at>2021-04-22 00:55:07 +0000
committerNorbert Preining <preining@logic.at>2021-04-22 00:55:07 +0000
commit3d6fbb767ecd4e1b0e8359a533e4d9bad9fbe1a6 (patch)
treefa6d652124252eeceb224977b89713d96b5a0f66 /Master/texmf-dist
parent40b96cf0d69fc606de3675710890c51f1f869698 (diff)
Revert accidently committed changes
git-svn-id: svn://tug.org/texlive/trunk@58961 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist')
-rwxr-xr-xMaster/texmf-dist/scripts/texlive/fmtutil.pl117
-rwxr-xr-xMaster/texmf-dist/scripts/texlive/tlmgr.pl77
2 files changed, 23 insertions, 171 deletions
diff --git a/Master/texmf-dist/scripts/texlive/fmtutil.pl b/Master/texmf-dist/scripts/texlive/fmtutil.pl
index 3882fc2a87e..2823ee3b487 100755
--- a/Master/texmf-dist/scripts/texlive/fmtutil.pl
+++ b/Master/texmf-dist/scripts/texlive/fmtutil.pl
@@ -60,11 +60,6 @@ my $sep = (win32() ? ';' : ':');
my @deferred_stderr;
my @deferred_stdout;
-my $first_time_creation_in_usermode = 0;
-
-my $DRYRUN = "";
-my $STATUS_FH;
-
(our $prg = basename($0)) =~ s/\.pl$//;
# make sure that the main binary path is available at the front
@@ -121,7 +116,6 @@ our @cmdline_options = ( # in same order as help message
"sys",
"user",
"cnffile=s@",
- "dry-run=n",
"fmtdir=s",
"no-engine-subdir",
"no-error-if-no-engine=s",
@@ -129,7 +123,6 @@ our @cmdline_options = ( # in same order as help message
"nohash",
"recorder",
"refresh",
- "status-file=s",
"strict!",
"quiet|silent|q",
"catcfg",
@@ -163,10 +156,9 @@ sub main {
# (and nothing else), since kpathsea can only deal with one.
$mktexfmtMode = 1;
- # we default to user mode here, in particular because **if** TEXMFSYSVAR
- # is writable we will use it to save format dumps created by mktexfmt
- # If root is running mktexfmt, then most probably the formats will end
- # up in TEXMFSYSVAR which is fine.
+ # TODO TODO
+ # which mode are we running in?
+ # what happens if root runs mktexfmt?
$opts{'user'} = 1;
GetOptions ( "help" => \$opts{'help'}, "version" => \$opts{'version'} )
@@ -222,13 +214,6 @@ sub main {
}
}
}
-
- $DRYRUN = "echo " if ($opts{'dry-run'});
-
- if ($opts{'status-file'}) {
- open $STATUS_FH, '>>', $opts{'status-file'}
- || printf STDERR "Cannot open status-file: $opts{'status-file'}\nWill not write status information!\n";
- }
# these two functions should go to TLUtils (for use in updmap)
($texmfconfig, $texmfvar) =
@@ -267,7 +252,7 @@ sub main {
touch($bakFile);
touch($changes_config_file);
}
- system("$DRYRUN$editor", $changes_config_file);
+ system($editor, $changes_config_file);
$changed = files_are_different($bakFile, $changes_config_file);
} elsif ($opts{'showhyphen'}) {
@@ -326,10 +311,6 @@ sub main {
return 1;
}
- if ($STATUS_FH) {
- close($STATUS_FH) || print STDERR "Cannot close fh for $opts{'status-file'}.\n";
- }
-
unless ($opts{'nohash'}) {
# TODO should only do this if built something, e.g., not --listcfg
print_info("updating ls-R files\n");
@@ -347,12 +328,6 @@ sub dump_data {
print Data::Dumper::Dumper($alldata);
}
-#
-sub log_to_status {
- if ($STATUS_FH) {
- print $STATUS_FH "@_\n";
- }
-}
# callback_build_formats - (re)builds the formats as selected,
# returns exit status or dies. Exit status is always zero unless
@@ -443,28 +418,13 @@ sub callback_build_formats {
next if ($swi eq "format!=engine" && $fmt eq $eng);
$total++;
my $val = select_and_rebuild_format($fmt, $eng, $what, $whatarg);
- if ($val == $FMT_DISABLED) {
- log_to_status("DISABLED", $fmt, $eng, $what, $whatarg);
- $disabled++;
- } elsif ($val == $FMT_NOTSELECTED) {
- log_to_status("NOTSELECTED", $fmt, $eng, $what, $whatarg);
- $nobuild++;
- } elsif ($val == $FMT_FAILURE) {
- log_to_status("FAILURE", $fmt, $eng, $what, $whatarg);
- $err++;
- push (@err, "$eng/$fmt");
- } elsif ($val == $FMT_SUCCESS) {
- log_to_status("SUCCESS", $fmt, $eng, $what, $whatarg);
- $suc++;
- } elsif ($val == $FMT_NOTAVAIL) {
- log_to_status("NOTAVAIL", $fmt, $eng, $what, $whatarg);
- $notavail++;
- }
- else {
- log_to_status("UNKNOWN", $fmt, $eng, $what, $whatarg);
- print_error("callback_build_format (round 1): unknown return "
- . "from select_and_rebuild.\n");
- }
+ if ($val == $FMT_DISABLED) { $disabled++; }
+ elsif ($val == $FMT_NOTSELECTED) { $nobuild++; }
+ elsif ($val == $FMT_FAILURE) { $err++; push (@err, "$eng/$fmt"); }
+ elsif ($val == $FMT_SUCCESS) { $suc++; }
+ elsif ($val == $FMT_NOTAVAIL) { $notavail++; }
+ else { print_error("callback_build_format (round 1): unknown return "
+ . "from select_and_rebuild.\n"); }
}
}
}
@@ -495,35 +455,7 @@ sub callback_build_formats {
# try to remove the tmpdir with all files
TeXLive::TLUtils::rmtree($tmpdir);
}
- #
- # In case of user mode and formats rebuilt, warn that these formats
- # will shadow future updates. Can be suppressed with --quiet which
- # does not show print_info output
- if ($opts{'user'} && $suc && $first_time_creation_in_usermode) {
- print_info("
-*************************************************************
-* *
-* WARNING: you are switching to fmtutil's per-user formats. *
-* Please read the following explanations. *
-* *
-*************************************************************
-
-You have run fmtutil-user (as opposed to fmtutil-sys) for the first time; this
-has created format files which are local to your personal account.
-
-Any changes in system formats will *not* be automatically reflected in
-your files; furthermore, running fmtutil-sys will no longer have any
-effect for you. As a consequence, you have to rerun fmtutil-user yourself
-after any change in the system directories.
-
-See http://tug.org/texlive/scripts-sys-user.html for details.
-
-If you want to undo this, remove the files mentioned above.
-
-(Run $prg --help for full documentation of fmtutil.)
-");
- }
- # return
+ # return
return $opts{"strict"} ? $err : 0;
}
@@ -587,28 +519,12 @@ sub select_and_rebuild_format {
}
}
if ($doit) {
- check_and_warn_on_user_format($fmt,$eng);
return rebuild_one_format($fmt,$eng,$kpsefmt,$destdir,$fmtfile,$logfile);
} else {
return $FMT_NOTSELECTED;
}
}
-sub check_and_warn_on_user_format {
- my ($fmt, $eng) = @_;
- # do nothing if we are updating files in $TEXMFVAR
- return if ($opts{'fmtdir'} eq $TEXMFVAR);
- my $saved_fmtdir = $opts{'fmtdir'};
- $opts{'fmtdir'} = "$TEXMFVAR/web2c";
- my ($kpsefmt, $destdir, $fmtfile, $logfile) = compute_format_destination($fmt, $eng);
- if (-r "$destdir/$fmtfile") {
- print_deferred_warning("you have a shadowing format dump in TEXMFVAR for $fmt/$eng!!!\n");
- }
- $opts{'fmtdir'} = $saved_fmtdir;
-}
-
-
-
# compute_format_destination
# takes fmt/eng and returns the locations where format and log files
# should be saved, that is, a list: (dump file full path, log file full path)
@@ -763,7 +679,7 @@ sub rebuild_one_format {
# in mktexfmtMode we must redirect *all* output to stderr
$cmdline .= " >&2" if $mktexfmtMode;
$cmdline .= " <$nul";
- my $retval = system("$DRYRUN$cmdline");
+ my $retval = system($cmdline);
# report error if it failed.
if ($retval != 0) {
@@ -832,13 +748,8 @@ sub rebuild_one_format {
}
my $destfile = "$destdir/$fmtfile";
- # set flag to warn that new user format was installed
- # we check whether the next command **would** create a new file,
- # and if it succeeded, we set the actual flag.
- my $possibly_warn = ($opts{'user'} && ! -r $destfile);
if (File::Copy::copy($fmtfile, $destfile )) {
print_info("$destfile installed.\n");
- $first_time_creation_in_usermode = $possibly_warn;
#
# original fmtutil.sh did some magic trick for mplib-luatex.mem
#
@@ -1429,7 +1340,6 @@ Options:
--cnffile FILE read FILE instead of fmtutil.cnf
(can be given multiple times, in which case
all the files are used)
- --dry-run | -n don't actually build formts
--fmtdir DIR write formats under DIR instead of TEXMF[SYS]VAR
--no-engine-subdir don't use engine-specific subdir of the fmtdir
--no-error-if-no-format exit successfully if no format is selected
@@ -1440,7 +1350,6 @@ Options:
--nohash don't update ls-R files
--recorder pass the -recorder option and save .fls files
--refresh recreate only existing format files
- --status-file FILE append status information about built formats to FILE
--quiet be silent
--catcfg (does nothing, exists for compatibility)
--dolinks (does nothing, exists for compatibility)
diff --git a/Master/texmf-dist/scripts/texlive/tlmgr.pl b/Master/texmf-dist/scripts/texlive/tlmgr.pl
index 55350a58316..78221b0616d 100755
--- a/Master/texmf-dist/scripts/texlive/tlmgr.pl
+++ b/Master/texmf-dist/scripts/texlive/tlmgr.pl
@@ -24,7 +24,6 @@ our $Master;
our $loadmediasrcerror;
our $packagelogfile;
our $packagelogged;
-our $commandslogged;
our $commandlogfile;
our $tlmgr_config_file;
our $pinfile;
@@ -633,7 +632,6 @@ for the full story.\n";
# package related actions (install, remove, update) to
# the package-log file TEXMFSYSVAR/web2c/tlmgr.log
$packagelogged = 0; # how many msgs we logged
- $commandslogged = 0;
chomp (my $texmfsysvar = `kpsewhich -var-value=TEXMFSYSVAR`);
$packagelogfile = $opts{"package-logfile"};
if ($opts{"usermode"}) {
@@ -701,15 +699,9 @@ for the full story.\n";
my $ret = execute_action($action, @ARGV);
# close the special log file
- if (!$::gui_mode) {
- if ($packagelogfile) {
- info("$prg: package log updated: $packagelogfile\n") if $packagelogged;
- close(PACKAGELOG);
- }
- if ($commandlogfile) {
- info("$prg: command log updated: $commandlogfile\n") if $commandslogged;
- close(COMMANDLOG);
- }
+ if ($packagelogfile && !$::gui_mode) {
+ info("$prg: package log updated: $packagelogfile\n") if $packagelogged;
+ close(PACKAGELOG);
}
# F_ERROR stops processing immediately, and prevents postactions from
@@ -836,7 +828,6 @@ sub do_cmd_and_check {
# and show it to the user before the possibly long delay.
info("running $cmd ...\n");
logcommand("running $cmd");
- logpackage("command: $cmd");
my ($out, $ret);
if ($opts{"dry-run"}) {
$ret = $F_OK;
@@ -876,15 +867,12 @@ sub handle_execute_actions {
my $errors = 0;
my $sysmode = ($opts{"usermode"} ? "-user" : "-sys");
- my $fmtutil_cmd = "fmtutil$sysmode";
- my $status_file = TeXLive::TLUtils::tl_tmpfile();
- my $fmtutil_args = "$common_fmtutil_args --status-file=$status_file";
-
+ my $invoke_fmtutil = "fmtutil$sysmode $common_fmtutil_args";
# of create_formats is unset (NOT the default) we add --refresh so that
# only existing formats are recreated
if (!$localtlpdb->option("create_formats")) {
- $fmtutil_args .= " --refresh";
+ $invoke_fmtutil .= " --refresh";
debug("only existing formats will be refreshed per user option (create_formats=0)\n");
}
@@ -985,9 +973,7 @@ sub handle_execute_actions {
for my $e (keys %updated_engines) {
debug ("updating formats based on $e\n");
$errors += do_cmd_and_check
- ("$fmtutil_cmd --byengine $e --no-error-if-no-format $fmtutil_args");
- read_and_report_fmtutil_status_file($status_file);
- unlink($status_file);
+ ("$invoke_fmtutil --no-error-if-no-format --byengine $e");
}
# now rebuild all other formats
for my $f (keys %do_enable) {
@@ -995,9 +981,7 @@ sub handle_execute_actions {
# ignore disabled formats
next if !$::execute_actions{'enable'}{'formats'}{$f}{'mode'};
debug ("(re)creating format dump $f\n");
- $errors += do_cmd_and_check ("$fmtutil_cmd --byfmt $f $fmtutil_args");
- read_and_report_fmtutil_status_file($status_file);
- unlink($status_file);
+ $errors += do_cmd_and_check ("$invoke_fmtutil --byfmt $f");
$done_formats{$f} = 1;
}
}
@@ -1016,9 +1000,7 @@ sub handle_execute_actions {
$lang = "$TEXMFSYSVAR/tex/generic/config/$lang";
}
if (!$::regenerate_all_formats) {
- $errors += do_cmd_and_check ("$fmtutil_cmd --byhyphen \"$lang\" $fmtutil_args");
- read_and_report_fmtutil_status_file($status_file);
- unlink($status_file);
+ $errors += do_cmd_and_check ("$invoke_fmtutil --byhyphen \"$lang\"");
}
}
}
@@ -1027,10 +1009,8 @@ sub handle_execute_actions {
# so we just refresh formats instead of generating all that have not been there
if ($::regenerate_all_formats) {
info("Regenerating available formats, this may take some time ...");
- # --refresh might already be in $fmtutil_args, but we don't care
- $errors += do_cmd_and_check("$fmtutil_cmd --all --refresh $fmtutil_args");
- read_and_report_fmtutil_status_file($status_file);
- unlink($status_file);
+ # --refresh might already be in $invoke_fmtutil, but we don't care
+ $errors += do_cmd_and_check("$invoke_fmtutil --refresh --all");
info("done\n");
$::regenerate_all_formats = 0;
}
@@ -1048,42 +1028,6 @@ sub handle_execute_actions {
}
}
-sub read_and_report_fmtutil_status_file {
- my $status_file = shift;
- my $fh;
- if (!open($fh, '<', $status_file)) {
- printf STDERR "Cannot read status file $status_file, strange!\n";
- return;
- }
- chomp(my @lines = <$fh>);
- close $fh;
- my @failed;
- my @success;
- for my $l (@lines) {
- my ($status, $fmt, $eng, $what, $whatargs) = split(' ', $l, 5);
- if ($status eq "DISABLED") {
- # ignore for now
- } elsif ($status eq "NOTSELECTED") {
- # ignore for now
- } elsif ($status eq "FAILURE") {
- push @failed, "${fmt}.fmt/$eng";
- } elsif ($status eq "SUCCESS") {
- push @success, "${fmt}.fmt/$eng";
- } elsif ($status eq "NOTAVAIL") {
- # ignore for now
- } elsif ($status eq "UNKNOWN") {
- # ignore for now
- } else {
- # ignore for now
- }
- }
- logpackage(" OK: @success") if (@success);
- logpackage(" ERROR: @failed") if (@failed);
- logcommand(" OK: @success") if (@success);
- logcommand(" ERROR: @failed") if (@failed);
- info(" OK: @success\n") if (@success);
- info(" ERROR: @failed\n") if (@failed);
-}
# GET_MIRROR
#
@@ -7566,7 +7510,6 @@ sub logpackage {
}
sub logcommand {
if ($commandlogfile) {
- $commandslogged++;
my $tim = localtime();
print COMMANDLOG "[$tim] @_\n";
}