fixltxhyph (17feb12)

git-svn-id: svn://tug.org/texlive/trunk@25420 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 57 insertions, 43 deletions

diff --git a/Master/texmf-dist/doc/latex/fixltxhyph/README b/Master/texmf-dist/doc/latex/fixltxhyph/README
index 0f634dbfc41..2eed05d224c 100644
--- a/Master/texmf-dist/doc/latex/fixltxhyph/README
+++ b/Master/texmf-dist/doc/latex/fixltxhyph/README
@@ -1,18 +1,18 @@
-FixLtxHyph v.0.2a
+FixLtxHyph v.0.3
 
 
 FixLtxHyph.sty is a small extension that allows to "correct' a small glitch
-in hyphenating "word" that are partially emphasized.
-This happens very frequently in languages suc as Catalan, French, Italian, 
+in hyphenating "words" that are partially emphasized.
+This happens very frequently in languages such as Catalan, French, Italian, 
 Romansh, and other where articles and articulated preposition undergo vocalic 
 elision before a word that starts wit a vowel: example "della eleganza" 
 becomes "dell'eleganza" after vocalic elision.
 Now if "eleganza" is emphasized as in "dell'\emph{eleganza}" the literal 
-string that TeX sees as a word include the apostrophe, and this ins fine 
+string that TeX sees as a word includes the apostrophe, and this is fine 
 in those languages where the apostrophe is set up for proper hyphenation, 
-but also a font change; therefore TeX does not hyphenate the whole string, 
-while it has no problems when hyphenating the same word without emphasis: 
-"del-l'e-le-gan-za".
+but it also includes a font change; therefore TeX does not hyphenate the
+whole string, while it has no problems when hyphenating the same word without 
+emphasis: "del-l'e-le-gan-za".
 
 This small package works fine with both pdfLaTeX and XeLaTeX; it has been 
 tested with the four languages listed above; at the moment of writing 
@@ -23,7 +23,7 @@ The single FixLtxHyph.dtx file is auto extracting; if you process it with
 pdfLaTeX you get both the documentation file in PDF format and the sty file.
 
 After extraction move the files, as usual, in the three homonymous folders 
-latex/fixltXhtph/ rooted in source/, doc/ and tex/ respectively.
+latex/fixltxhtph/ rooted in source/, doc/ and tex/ respectively.
 
 Claudio Beccari 2012
 Author maintained
diff --git a/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf b/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf
index 3e39df244cf..75ee6c79b92 100644
--- a/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf
+++ b/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf
diff --git a/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx b/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx
index 3f0416dd2b9..902826a9604 100644
--- a/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx
+++ b/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx
@@ -15,7 +15,7 @@
 \endpreamble
 \postamble
 
-Copyright 2011 Claudio Beccari
+Copyright 20112012 Claudio Beccari
 
 Distributable under the LaTeX Project Public License,
 version 1.3c or higher (your choice). The latest version of
@@ -46,15 +46,15 @@ and the English documentation file in pdf format.
 % \iffalse
 %<*driver>
 \documentclass{ltxdoc}
-\ProvidesFile{fixltxhyph.dtx}[2011/12/29 v.0.2a Documented TeX file for
-the FixLtxHyph bundle]
+\ProvidesFile{fixltxhyph.dtx}[2012/02/17 v.0.3 Documented TeX file for
+the FixLtxHyph package]
 \GetFileInfo{fixltxhyph.dtx}
 \usepackage[latin1]{inputenc}
 \usepackage[T1]{fontenc}
 \usepackage{lmodern}
 \usepackage{color}
 \usepackage{multicol}
-\title{\centering The FixLtxHyph bundle\protect\\
+\title{\centering The FixLtxHyph package\protect\\
 A small fix in order to hyphenate emphasized words after a vocalic elision\protect\\
 in Catalan, French, Italian and Romansh}
 \date{\fileversion\space\filedate}
@@ -72,13 +72,13 @@ in Catalan, French, Italian and Romansh}
 \end{document}
 %</driver>
 % \fi
-% \CheckSum{50}
+% \CheckSum{48}
 %
 % \begin{abstract}
 % This file fixes a small feature of the hyphenation algorithm used by the \TeX\ system 
 % typesetting engines that manifests itself only with those languages that use the
-% apostrophe  for marking a vocalic elision. This small package was set up to fix this
-% little undesirable  feature in Italian, but it was extended to Catalan, French and the
+% apostrophe for marking a vocalic elision. This small package was set up to fix this
+% little undesirable feature in Italian, but it was extended to Catalan, French and the
 % future implementation of the fourth official Swiss language Rumantsch Grischun (Romansh
 % in English).
 % \end{abstract}
@@ -86,7 +86,7 @@ in Catalan, French, Italian and Romansh}
 % The four languages Catalan, French, Italian and Romansh use the  apostrophe for marking
 % the vocalic elision of the ending vowel at the end of prepositions, articles, articulated
 % prepositions, definite adjectives, and other words playing similar rôles when they just
-% precede a nouns, adjectives, verbs, numerals, that start with a vowel.
+% precede nouns, adjectives, verbs, numerals, that start with a vowel.
 % 
 % This feature is common to most Romance languages (from West to East) from Catalan and
 % Valencian, to French, Langue d'oc, Occitan, Provençal, Vivaroalpin, Italian, Piedmontese,
@@ -115,7 +115,7 @@ in Catalan, French, Italian and Romansh}
 % or something equivalent. With this little trick, the typesetting engine considers the
 % apostrophe as a valid word character and treats the whole string as a single word; the
 % patterns of these languages, of course, take into consideration also the apostrophe so
-% that the following correct line break points are easily found\footnote{For typesetting
+% that the resulting correct line break points are easily found\footnote{For typesetting
 % Romansh and hyphenating it, initially I wrote myself a short language definition file,
 % where, among other things, Romansh was considered as a dialect of Italian. In this way I did
 % not need to build up the specific Romansh patterns; of course this was done only for thesting
@@ -129,11 +129,14 @@ in Catalan, French, Italian and Romansh}
 % dal rumantsch grischun} published by the Department of romance languages and literature
 % of the Friburg University, Switzerland. The patterns I produced work pretty well, but they
 % are not built up for etimological hyphenation, therefore some prefixex or compound words
-% might be divides without respecting the compound word barrier.}:
+% might be divided without respecting the compound word barrier. At the date of writing these
+% notes, the Romansh patterns and the language description file have been
+% uploaded to the polyglossia and babel teams, but they are not yet available for the
+% general user.}:
 %\begin{center}
 %\begin{tabular}{l>{\ttfamily}ll}
 %Catalan		& d'aquesta		& d'a-ques-ta		\\
-%French			& l'électricité	& l'élec-tri-ci-té	\\
+%French		& l'électricité	& l'élec-tri-ci-té	\\
 %Italian		& dell'eleganza	& del-l'e-le-gan-za	\\
 %Romansh		& l'identitad	& l'i-den-ti-tad
 %\end{tabular}
@@ -171,7 +174,7 @@ in Catalan, French, Italian and Romansh}
 % his PhD student who developed the hyphenation algorithm implemented in the typesetting
 % engines of the \TeX\ system\footnote{I have been told that Lua\TeX\ is developing
 % a different algorithm that eliminates this feature.}.
-% As all such decisions, it is a compromise between accuracy and speed. And remember the at
+% As all such decisions, it is a compromise between accuracy and speed. And remember that at
 % the beginning \prog{tex} the program was used essentially with English, a language that
 % does not use accented letters and uses elision in a much different way as the one we are
 % speaking here. The problem did non exist and, I suppose, it will never exist in English.
@@ -188,7 +191,7 @@ in Catalan, French, Italian and Romansh}
 % But manual or automatic, how should we proceed? Simply we must convince that the
 % starting letter must not be the start of the part preceding  the apostrophe, but what
 % follows it.
-% This is simple: it suffices to put after the apostrophe a unbreakable zero width glob of
+% This is simple: it suffices to put after the apostrophe a unbreakable, zero width glob of
 % glue; \TeX\ starts looking for a potential starting letter after the glue.
 % Therefore the manual solution consists in defining a short macro such as the following
 % one:
@@ -196,8 +199,8 @@ in Catalan, French, Italian and Romansh}
 %\newcommand\hz{\nobreak\hskip\z@skip}
 %\end{verbatim}
 % or, if you want to avoid setting this short command into a personal \texttt{.sty} file,
-% simple change |\z@skip| with |0pt|.  You will then have to change the font changing
-% phrase in something such as:
+% simple change |\z@skip| with |0pt|.  You will then have to modify the font changing
+% phrase into something such as:
 %\begin{verbatim}
 %... d'\hz\textbf{aquesta} ...
 %\end{verbatim}
@@ -207,16 +210,19 @@ in Catalan, French, Italian and Romansh}
 % introduced in the horizontal list by the selected font identification.
 %
 % The automatic solution, on the opposite, implies a small but substantial modification of
-% the |\emph| command. In facts the text command uses the text declaration |\em| and as
-% such the latter is much simpler to modify by simply attaching the command |\hz| at the
-% end % of its definition.
+% the |\emph| command. In facts the text command uses the text declaration |\em|; on turn 
+% |\em| is a robusta commanda, that is it is defined as \verb*|\protext\em |: it would be
+% very unwise to modify a protected command, so it is necessary to modifiy the ``protected''
+% one, and this operation is not trivial because of the space in the name of this macro. 
+% In any case if we find out how, we must add |\hz| to the definition of \verb*|\em | before
+% its argument, the real text to emphasize, is processed.
 %
-% This small packages does exactly this, only for the four named languages, and only if
+% This small package does exactly this, only for the four named languages, and only if
 % they are used, and only with the |\emph| command. The |\hz| command is available to the
 % user in a global way, so that when this package is loaded, the manual solution remains
 % valid for every language, although in very unlikely situations.
 %
-% It has been tested with the four languages (Romansh in a very embryonal state) and
+% It has been tested with the four languages, and
 % apparently it works as expected; it has been throughly tested in all situations with
 % Italian; it should work properly also in French and in Romansh. The adopted solution
 % does not fiddle with active characters and therefore it does not interfere with the
@@ -240,16 +246,17 @@ in Catalan, French, Italian and Romansh}
 %\item Move \texttt{fixltxhyph.sty} to \texttt{.../texmf/tex/latex/FixLtxHyph/};
 %\item if your distribution requires it, refresh the file name database.
 %\end{itemize}
-%You are now ready to use the package by simply invoking it in the preamble of your
+% You are now ready to use the package by simply invoking it in the preamble of your
 % documents:
 %\begin{verbatim}
 %\usepackage{fixltxhyph}
 %\end{verbatim}
 %
-%\section{Aknowledgements}
+%\ section{Aknowledgements}
 %I wish to thank Lorenzo Pantieri who tested the preliminary and the actual versions of
 % this package and directly or indirectly helped debugging the code, especially in the
-% preliminary version that used active characters and was particularly buggy.
+% preliminary version that used active characters and was particularly buggy. Another
+% big thank to Enrico Gregorio who spotted the protection problem of the |\em| command.
 %
 % \StopEventually{}
 %
@@ -269,6 +276,11 @@ emphasized words preceded by vocalic elision]
 \endinput}
 %    \end{macrocode}
 %
+% We need the package |etoolbox| in order to perform any action on control sequences
+% that contain spaces in their names.
+%    \begin{macrocode}
+\RequirePackage{etoolbox}
+%    \end{macrocode}
 % We define a very short command |\hz| in order to have available a handy command 
 % for inserting an unbreakable zero width glob of glue in case we needed to do some 
 % sort of patching by hand. 
@@ -287,20 +299,21 @@ emphasized words preceded by vocalic elision]
 % definitions only for the named four languages and to rest the original situation when a
 % change of language takes place.
 %    \begin{macrocode}
-\let\originalem\em
-\let\newem\em
-\addto\newem{\hz}
+\letcs{\FLH@originalem}{em }
+\let\FLH@newem\FLH@originalem
+\preto\FLH@newem{\hz}
 %    \end{macrocode}
 %
 % We then use a repetition cycle based on a list of language names; if the
 % language with one of the listed names has been invoked as an option to \texttt{babel},
-% then the patched |\em| definition is made the default, while when changing language the original definition is restored:
+% then the patched \verb*|\em | definition is made the default, while when changing
+% language the original definition is restored:
 %    \begin{macrocode}
 \def\@tempB{catalan,french,italian,romansh}
 \@for\@tempA:=\@tempB\do{%
 \expandafter\ifx\csname captions\@tempA\endcsname\relax\else
-\expandafter\addto\csname extras\@tempA\endcsname{\let\em\newem}%
-\expandafter\addto\csname noextras\@tempA\endcsname{\let\em\originalem}\fi}
+\expandafter\addto\csname extras\@tempA\endcsname{\cslet{em }{\FLH@newem}}%
+\expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}\fi}
 %    \end{macrocode}
 %
 % Eventually the documented file is terminated and its final commands are issued.
diff --git a/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty b/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty
index a74cf987c48..2061d4af150 100644
--- a/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty
+++ b/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty
@@ -18,17 +18,18 @@ emphasized words preceded by vocalic elision]
 \@ifpackageloaded{babel}{}{%
 \PackageWarning{FixLtXHyph}{This package must be loaded after babel}%
 \endinput}
+\RequirePackage{etoolbox}
 \newcommand\hz{\nobreak\hskip\z@skip}
-\let\originalem\em
-\let\newem\em
-\addto\newem{\hz}
+\letcs{\FLH@originalem}{em }
+\let\FLH@newem\FLH@originalem
+\preto\FLH@newem{\hz}
 \def\@tempB{catalan,french,italian,romansh}
 \@for\@tempA:=\@tempB\do{%
 \expandafter\ifx\csname captions\@tempA\endcsname\relax\else
-\expandafter\addto\csname extras\@tempA\endcsname{\let\em\newem}%
-\expandafter\addto\csname noextras\@tempA\endcsname{\let\em\originalem}\fi}
+\expandafter\addto\csname extras\@tempA\endcsname{\cslet{em }{\FLH@newem}}%
+\expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}\fi}
 %% 
-%% Copyright 2011 Claudio Beccari
+%% Copyright 20112012 Claudio Beccari
 %% 
 %% Distributable under the LaTeX Project Public License,
 %% version 1.3c or higher (your choice). The latest version of