babel-$ll (for 3.9a)

git-svn-id: svn://tug.org/texlive/trunk@30292 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 1978 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/generic/babel-slovak/slovak.pdf b/Master/texmf-dist/doc/generic/babel-slovak/slovak.pdf
new file mode 100644
index 00000000000..5839b693eeb
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/babel-slovak/slovak.pdf
diff --git a/Master/texmf-dist/source/generic/babel-slovak/slovak.dtx b/Master/texmf-dist/source/generic/babel-slovak/slovak.dtx
new file mode 100644
index 00000000000..d2d0c00a79b
--- /dev/null
+++ b/Master/texmf-dist/source/generic/babel-slovak/slovak.dtx
@@ -0,0 +1,1310 @@
+% \iffalse meta-comment
+%
+% Copyright 1989-2008 Johannes L. Braams and any individual authors
+% listed elsewhere in this file.  All rights reserved.
+% 
+% This file is part of the Babel system.
+% --------------------------------------
+% 
+% It may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2003/12/01 or later.
+% 
+% This work has the LPPL maintenance status "maintained".
+% 
+% The Current Maintainer of this work is Johannes Braams.
+% 
+% The list of all files belonging to the Babel system is
+% given in the file `manifest.bbl. See also `legal.bbl' for additional
+% information.
+% 
+% The list of derived (unpacked) files belonging to the distribution
+% and covered by LPPL is defined by the unpacking scripts (with
+% extension .ins) which are part of the distribution.
+% \fi
+% \CheckSum{1382}
+% \iffalse
+%    Tell the \LaTeX\ system who we are and write an entry on the
+%    transcript.
+%<*dtx>
+\ProvidesFile{slovak.dtx}
+%</dtx>
+%<+code>\ProvidesLanguage{slovak}
+%\fi
+%\ProvidesFile{slovak.dtx}
+        [2008/07/06 v3.1a Slovak support from the babel system]
+%\iffalse
+%% File `slovak.dtx' 
+%% Babel package for LaTeX version 2e
+%% Copyright (C) 1989 - 2008
+%%           by Johannes Braams, TeXniek
+%
+%% Slovak Language Definition File
+%% Copyright (C) 1989 - 2001
+%%           by Jana Chlebikova
+%            Department of Artificial Intelligence
+%            Faculty of Mathematics and Physics
+%            Mlynska dolina
+%            84215 Bratislava
+%            Slovakia
+%            (42)(7) 720003 l. 835
+%            (42)(7) 725882
+%            chlebikj at mff.uniba.cs (Internet)
+%            and Johannes Braams, TeXniek
+%
+%% Copyright (C) 2002-2005
+%%           by Tobias Schlemmer
+%            Braunsdorfer Stra\ss e 101
+%            01159 Dresden
+%            Deutschland
+%            Tobias.Schlemmer at web.de
+%
+%% Copyright (C) 2005-2008
+%%           by Petr Tesa\v r\'ik (babel at tesarici.cz)
+%
+% This file is also based on CSLaTeX
+%                       by Ji\v r\'i Zlatu\v ska, Zden\v ek Wagner,
+%                          Jaroslav \v Snajdr and Petr Ol\v s\'ak.
+%
+%% Please report errors to: Petr Tesa\v r\'ik
+%%                          babel at tesarici.cz
+%
+%    This file is part of the babel system, it provides the source
+%    code for the Slovak language definition file.
+%<*filedriver>
+\documentclass{ltxdoc}
+\newcommand*\TeXhax{\TeX hax}
+\newcommand*\babel{\textsf{babel}}
+\newcommand*\langvar{$\langle \it lang \rangle$}
+\newcommand*\note[1]{}
+\newcommand*\Lopt[1]{\textsf{#1}}
+\newcommand*\file[1]{\texttt{#1}}
+\begin{document}
+ \DocInput{slovak.dtx}
+\end{document}
+%</filedriver>
+%\fi
+%
+% \def\CS{$\cal C\kern-.1667em
+%   \lower.5ex\hbox{$\cal S$}\kern-.075em$}
+%
+% \GetFileInfo{slovak.dtx}
+%
+% \changes{slovak-1.0}{1992/07/15}{First version}
+% \changes{slovak-1.2}{1994/02/27}{Update for \LaTeXe}
+% \changes{slovak-1.2d}{1994/06/26}{Removed the use of \cs{filedate}
+%    and moved identification after the loading of \file{babel.def}}
+% \changes{slovak-1.2i}{1996/10/10}{Replaced \cs{undefined} with
+%    \cs{@undefined} and \cs{empty} with \cs{@empty} for consistency
+%    with \LaTeX, moved the definition of \cs{atcatcode} right to the
+%    beginning.}
+% \changes{slovak-1.3a}{2004/02/20}{Added contributed shorthand
+%    definitions} 
+% \changes{slovak-3.0}{2005/09/10}{Implemented the functionality of
+%    \CS\LaTeX's slovak.sty.  The version number was bumped to 3.0
+%    to minimize confusion by being higher than the last version
+%    of \CS\LaTeX.}
+%
+%  \section{The Slovak language}
+%
+%    The file \file{\filename}\footnote{The file described in this
+%    section has version number \fileversion\ and was last revised on
+%    \filedate.  It was originally written by Jana Chlebikova
+%    (\texttt{chlebik@euromath.dk}) and modified by Tobias Schlemmer
+%    (\texttt{Tobias.Schlemmer@web.de}). It was then rewritten by
+%    Petr Tesa\v r\'ik (\texttt{babel@tesarici.cz}).} defines all the
+%    language-specific macros for the Slovak language.
+%
+%    For this language the macro |\q| is defined. It was used with the
+%    letters (\texttt{t}, \texttt{d}, \texttt{l}, and \texttt{L}) and
+%    adds a \texttt{'} to them to simulate a `hook' that should be
+%    there.  The result looks like t\kern-2pt\char'47. Since the the T1
+%    font encoding has the corresponding characters it is mapped to |\v|.
+%    Therefore we recommend using T1 font encoding. If you don't want to
+%    use this encoding, please, feel free to redefine |\q| in your file.
+%    I think babel will honour this |;-)|.
+%
+%    For this language the characters |"|, |'| and |^| are made
+%    active. In table~\ref{tab:slovak-quote} an overview is given of
+%    its purpose. Also the vertical placement of the
+%    umlaut can be controlled this way.
+%
+%    \begin{table}[htb]
+%     \begin{center}
+%     \begin{tabular}{lp{8cm}}
+%      |"a| & |\"a|, also implemented for the other
+%                  lowercase and uppercase vowels.                 \\
+%      |^d| & |\q d|, also implemented for l, t and L.             \\
+%      |^c| & |\v c|, also implemented for C, D, N, n, T, Z and z. \\
+%      |^o| & |\^o|, also implemented for O.                       \\
+%      |'a| & |\'a|, also implemented for the other lowercase and
+%                    uppercase l, r, y and vowels.                 \\
+%      \verb="|= & disable ligature at this position.              \\
+%      |"-| & an explicit hyphen sign, allowing hyphenation
+%             in the rest of the word.                             \\
+%      |""| & like |"-|, but producing no hyphen sign
+%             (for compund words with hyphen, e.g.\ |x-""y|).      \\
+%      |"~| & for a compound word mark without a breakpoint.       \\
+%      |"=| & for a compound word mark with a breakpoint, allowing
+%             hyphenation in the composing words.                  \\
+%      |"`| & for German left double quotes (looks like ,,).       \\
+%      |"'| & for German right double quotes.                      \\
+%      |"<| & for French left double quotes (similar to $<<$).     \\
+%      |">| & for French right double quotes (similar to $>>$).    \\
+%     \end{tabular}
+%     \caption{The extra definitions made
+%              by \file{slovak.ldf}}\label{tab:slovak-quote}
+%     \end{center}
+%    \end{table}
+%
+%    The quotes in table~\ref{tab:slovak-quote} can also be typeset by
+%    using the commands in table~\ref{tab:smore-quote}.
+%    \begin{table}[htb]
+%     \begin{center}
+%     \begin{tabular}{lp{8cm}}
+%      |\glqq| & for German left double quotes (looks like ,,).   \\
+%      |\grqq| & for German right double quotes (looks like ``).  \\
+%      |\glq|  & for German left single quotes (looks like ,).    \\
+%      |\grq|  & for German right single quotes (looks like `).   \\
+%      |\flqq| & for French left double quotes (similar to $<<$). \\
+%      |\frqq| & for French right double quotes (similar to $>>$).\\
+%      |\flq|  & for (French) left single quotes (similar to $<$).  \\
+%      |\frq|  & for (French) right single quotes (similar to $>$). \\
+%      |\dq|   & the original quotes character (|"|).        \\
+%      |\sq|   & the original single quote (|'|).            \\
+%     \end{tabular}
+%     \caption{More commands which produce quotes, defined
+%              by \file{slovak.ldf}}\label{tab:smore-quote}
+%     \end{center}
+%    \end{table}
+%
+%  \subsection{Compatibility}
+%
+%    Great care has been taken to ensure backward compatibility with
+%    \CS\LaTeX.  In particular, documents which load this file with
+%    |\usepackage{slovak}| should produce identical output with no
+%    modifications to the source.  Additionally, all the \CS\LaTeX{}
+%    options are recognized:
+%
+%    \label{tab:slovak-options}
+%    \begin{list}{}
+%     {\def\makelabel#1{\sbox0{\Lopt{#1}}%
+%        \ifdim\wd0>\labelwidth
+%          \setbox0\vbox{\box0\hbox{}} \wd0=0pt \fi
+%        \box0\hfil}
+%      \setlength{\labelwidth}{2\parindent}
+%      \setlength{\leftmargin}{2\parindent}
+%      \setlength{\rightmargin}{\parindent}}
+%     \item[IL2, T1, OT1]
+%       These options set the default font encoding.  Please note
+%       that their use is deprecated. You should use the |fontenc|
+%       package to select font encoding.
+%
+%     \item[split, nosplit]
+%       These options control whether hyphenated words are
+%       automatically split according to Slovak typesetting rules.
+%       With the \Lopt{split} option ``je-li'' is hyphenated as
+%       ``je-/-li''. The \Lopt{nosplit} option disables this behavior.
+%
+%       The use of this option is strongly discouraged, as it breaks
+%       too many common things---hyphens cannot be used in labels,
+%       negative arguments to \TeX{} primitives will not work in
+%       horizontal mode (use \cs{minus} as a workaround), and there are
+%       a few other peculiarities with using this mode.
+%
+%     \item[nocaptions]
+%
+%       This option was used in \CS\LaTeX{} to set up Czech/Slovak
+%       typesetting rules, but leave the original captions and dates.
+%       The recommended way to achieve this is to use English as the main
+%       language of the document and use the environment |otherlanguage*|
+%       for Czech text.
+%
+%     \item[olduv]
+%       There are two version of \cs{uv}.  The older one allows the use
+%       of \cs{verb} inside the quotes but breaks any respective kerning
+%       with the quotes (like that in \CS{} fonts).  The newer one honors
+%       the kerning in the font but does not allow \cs{verb} inside the
+%       quotes.
+%
+%       The new version is used by default in \LaTeXe{} and the old version
+%       is used with plain \TeX.  You may use \Lopt{olduv} to override the
+%       default in \LaTeXe.
+%       
+%     \item[cstex]
+%       This option was used to include the commands \cs{csprimeson} and
+%       \cs{csprimesoff}.  Since these commands are always included now,
+%       it has been removed and the empty definition lasts for compatibility.
+%    \end{list}
+%
+% \StopEventually{}
+%
+%  \subsection{Implementation}
+%
+%    The macro |\LdfInit| takes care of preventing that this file is
+%    loaded more than once, checking the category code of the
+%    \texttt{@} sign, etc.
+% \changes{slovak-1.2i}{1996/11/03}{Now use \cs{LdfInit} to perform
+%    initial checks} 
+%    \begin{macrocode}
+%<*code>
+\LdfInit\CurrentOption{date\CurrentOption}
+%    \end{macrocode}
+%
+%    When this file is read as an option, i.e. by the |\usepackage|
+%    command, \texttt{slovak} will be an `unknown' language in which
+%    case we have to make it known. So we check for the existence of
+%    |\l@slovak| to see whether we have to do something here.
+%
+% \changes{slovak-1.2d}{1994/06/26}{Now use \cs{@nopatterns} to
+%    produce the warning}
+%    \begin{macrocode}
+\ifx\l@slovak\@undefined
+    \@nopatterns{Slovak}
+    \adddialect\l@slovak0\fi
+%    \end{macrocode}
+%
+%    We need to define these macros early in the process.
+%
+%    \begin{macrocode}
+\def\cs@iltw@{IL2}
+\newif\ifcs@splithyphens
+\cs@splithyphensfalse
+%    \end{macrocode}
+%
+%    If Babel is not loaded, we provide compatibility with \CS\LaTeX.
+%    However, if macro \cs{@ifpackageloaded} is not defined, we assume
+%    to be loaded from plain and provide compatibility with csplain.
+%    Of course, this does not work well with \LaTeX$\:$2.09, but I
+%    doubt anyone will ever want to use this file with \LaTeX$\:$2.09.
+%
+%    \begin{macrocode}
+\ifx\@ifpackageloaded\@undefined
+  \let\cs@compat@plain\relax
+  \message{csplain compatibility mode}
+\else
+  \@ifpackageloaded{babel}{}{%
+    \let\cs@compat@latex\relax
+    \message{cslatex compatibility mode}}
+\fi
+\ifx\cs@compat@latex\relax
+  \ProvidesPackage{slovak}[2008/07/06 v3.1a CSTeX Slovak style]
+%    \end{macrocode}
+%
+%    Declare \CS\LaTeX{} options (see also the descriptions on page
+%    \pageref{tab:slovak-options}).
+%
+%    \begin{macrocode}
+  \DeclareOption{IL2}{\def\encodingdefault{IL2}}
+  \DeclareOption {T1}{\def\encodingdefault {T1}}
+  \DeclareOption{OT1}{\def\encodingdefault{OT1}}
+  \DeclareOption{nosplit}{\cs@splithyphensfalse}
+  \DeclareOption{split}{\cs@splithyphenstrue}
+  \DeclareOption{nocaptions}{\let\cs@nocaptions=\relax}
+  \DeclareOption{olduv}{\let\cs@olduv=\relax}
+  \DeclareOption{cstex}{\relax}
+%    \end{macrocode}
+%
+%    Make |IL2| encoding the default.  This can be overriden with
+%    the other font encoding options.
+%    \begin{macrocode}
+  \ExecuteOptions{\cs@iltw@}
+%    \end{macrocode}
+%
+%    Now, process the user-supplied options.
+%    \begin{macrocode}
+  \ProcessOptions
+%    \end{macrocode}
+%
+%    Standard \LaTeXe{} does not include the IL2 encoding in the format.
+%    The encoding can be loaded later using the fontenc package, but
+%    \CS\LaTeX{} included IL2 by default.  This means existing documents
+%    for \CS\LaTeX{} do not load that package, so load the encoding
+%    ourselves in compatibility mode.
+%
+%    \begin{macrocode}
+  \ifx\encodingdefault\cs@iltw@
+    \input il2enc.def
+  \fi
+%    \end{macrocode}
+%
+%    Restore the definition of \cs{CurrentOption}, clobbered by processing
+%    the options.
+%
+%    \begin{macrocode}
+  \def\CurrentOption{slovak}
+\fi
+%    \end{macrocode}
+%
+%    The next step consists of defining commands to switch to (and
+%    from) the Slovak language.
+%
+%  \begin{macro}{\captionsslovak}
+%    The macro \cs{captionsslovak} defines all strings used in the four
+%    standard documentclasses provided with \LaTeX.
+% \changes{slovak-1.2g}{1995/07/04}{Added \cs{proofname} for
+%    AMS-\LaTeX}
+% \changes{slovak-1.2k}{1999/02/28}{Repaired a few spelling mistakes}
+% \changes{slovak-1.2l}{2000/09/20}{Added \cs{glossaryname}}
+% \changes{slovak-3.0}{2005/12/22}{Updated some translations.  Former
+%    translations were: `\'Uvod' for \cs{prefacename}, `Referencie' for
+%    \cs{refname}, `Index' for \cs{indexname}, `Obr\'azok' for
+%    \cs{figurename}, `Pr\'ilohy' for \cs{enclname}, `CC' for \cs{ccname},
+%    `Komu' for \cs{headtoname}, `Strana' for \cs{pagename}}
+%    \begin{macrocode}
+\@namedef{captions\CurrentOption}{%
+  \def\prefacename{Predhovor}%
+  \def\refname{Literat\'ura}%
+  \def\abstractname{Abstrakt}%
+  \def\bibname{Literat\'ura}%
+  \def\chaptername{Kapitola}%
+  \def\appendixname{Dodatok}%
+  \def\contentsname{Obsah}%
+  \def\listfigurename{Zoznam obr\'azkov}%
+  \def\listtablename{Zoznam tabuliek}%
+  \def\indexname{Register}%
+  \def\figurename{Obr.}%
+  \def\tablename{Tabu\v{l}ka}%
+  \def\partname{\v{C}as\v{t}}%
+  \def\enclname{Pr\'{\i}loha}%
+  \def\ccname{cc.}%
+  \def\headtoname{Pre}%
+  \def\pagename{Str.}%
+  \def\seename{vi\v{d}}%
+  \def\alsoname{vi\v{d} tie\v{z}}%
+  \def\proofname{D\^okaz}%
+  \def\glossaryname{Slovn\'{\i}k}%
+  }%
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\dateslovak}
+%    The macro \cs{dateslovak} redefines the command \cs{today}
+%    to produce Slovak dates.
+% \changes{slovak-1.2j}{1997/10/01}{Use \cs{edef} to define
+%    \cs{today} to save memory}
+% \changes{slovak-1.2j}{1998/03/28}{use \cs{def} instead of \cs{edef}}
+% \changes{slovak-1.2k}{1999/02/28}{Repaired a spelling mistake}
+%    \begin{macrocode}
+\@namedef{date\CurrentOption}{%
+  \def\today{\number\day.~\ifcase\month\or
+    janu\'ara\or febru\'ara\or marca\or apr\'{\i}la\or m\'aja\or
+    j\'una\or j\'ula\or augusta\or septembra\or okt\'obra\or
+    novembra\or decembra\fi
+    \space \number\year}}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\extrasslovak}
+%  \begin{macro}{\noextrasslovak}
+%    The macro \cs{extrasslovak} will perform all the extra definitions
+%    needed for the Slovak language. The macro \cs{noextrasslovak} is
+%    used to cancel the actions of \cs{extrasslovak}.
+%
+%    For Slovak texts \cs{frenchspacing} should be in effect.  Language
+%    group for shorthands is also set here.
+% \changes{slovak-3.0}{1995/04/21}{now use \cs{bbl@frenchspacing} and
+%    \cs{bbl@nonfrenchspacing}}
+% \changes{slovak-3.1}{2006/10/07}{move \cs{languageshorthands} here,
+%    so that the language group is always initialized correctly}
+%    \begin{macrocode}
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \bbl@frenchspacing
+  \languageshorthands{slovak}}
+\expandafter\addto\csname noextras\CurrentOption\endcsname{%
+  \bbl@nonfrenchspacing}
+%    \end{macrocode}
+%
+% \changes{slovak-1.2e}{1995/05/28}{Use \LaTeX's \cs{v} accent
+%    command}
+%    \begin{macrocode}
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \babel@save\q\let\q\v}
+%    \end{macrocode}
+%
+%    For Slovak three characters are used to define shorthands, they
+%    need to be made active.
+% \changes{slovak-1.3a}{2004/02/20}{Make three characters available
+%    for shorthands}
+%    \begin{macrocode}
+\ifx\cs@compat@latex\relax\else
+  \initiate@active@char{^}
+  \addto\extrasslovak{\bbl@activate{^}}
+  \addto\noextrasslovak{\bbl@deactivate{^}}
+  \initiate@active@char{"}
+  \addto\extrasslovak{\bbl@activate{"}\umlautlow}
+  \addto\noextrasslovak{\bbl@deactivate{"}\umlauthigh}
+  \initiate@active@char{'}
+  \@ifpackagewith{babel}{activeacute}{%
+    \addto\extrasslovak{\bbl@activate{'}}
+    \addto\noextrasslovak{\bbl@deactivate{'}}%
+    }{}
+\fi
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\sq}
+%  \begin{macro}{\dq}
+%    We save the original single and double quote characters in
+%    \cs{sq} and \cs{dq} to make them available later.  The math
+%    accent |\"| can now be typed as |"|.
+%    \begin{macrocode}
+\begingroup\catcode`\"=12\catcode`\'=12
+\def\x{\endgroup
+  \def\sq{'}
+  \def\dq{"}}
+\x
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+% \changes{slovak-1.2b}{1994/06/04}{Added setting of left- and
+%    righthyphenmin}
+%
+%    The slovak hyphenation patterns should be used with
+%    |\lefthyphenmin| set to~2 and |\righthyphenmin| set to~3.
+% \changes{slovak-1.2e}{1995/05/28}{Now use \cs{slovakhyphenmins}}
+% \changes{slovak-1.2l}{2000/09/22}{Now use \cs{providehyphenmins} to
+%    provide a default value}
+% \changes{slovak-3.0}{2005/12/22}{Changed default \cs{righthyphenmin}
+%    to 3 characters.}
+%    \begin{macrocode}
+\providehyphenmins{\CurrentOption}{\tw@\thr@@}
+%    \end{macrocode}
+%
+%    In order to prevent problems with the active |^| we add a
+%    shorthand on system level which expands to a `normal |^|.
+%    \begin{macrocode}
+\ifx\cs@compat@latex\relax\else
+  \declare@shorthand{system}{^}{\csname normal@char\string^\endcsname}
+%    \end{macrocode}
+%
+%    Now we can define the doublequote macros: the umlauts,
+%    \begin{macrocode}
+  \declare@shorthand{slovak}{"a}{\textormath{\"{a}\allowhyphens}{\ddot a}}
+  \declare@shorthand{slovak}{"o}{\textormath{\"{o}\allowhyphens}{\ddot o}}
+  \declare@shorthand{slovak}{"u}{\textormath{\"{u}\allowhyphens}{\ddot u}}
+  \declare@shorthand{slovak}{"A}{\textormath{\"{A}\allowhyphens}{\ddot A}}
+  \declare@shorthand{slovak}{"O}{\textormath{\"{O}\allowhyphens}{\ddot O}}
+  \declare@shorthand{slovak}{"U}{\textormath{\"{U}\allowhyphens}{\ddot U}}
+%    \end{macrocode}
+%    tremas,
+%    \begin{macrocode}
+  \declare@shorthand{slovak}{"e}{\textormath{\"{e}\allowhyphens}{\ddot e}}
+  \declare@shorthand{slovak}{"E}{\textormath{\"{E}\allowhyphens}{\ddot E}}
+  \declare@shorthand{slovak}{"i}{\textormath{\"{\i}\allowhyphens}%
+                                {\ddot\imath}}
+  \declare@shorthand{slovak}{"I}{\textormath{\"{I}\allowhyphens}{\ddot I}}
+%    \end{macrocode}
+%    other slovak characters
+%    \begin{macrocode}
+  \declare@shorthand{slovak}{^c}{\textormath{\v{c}\allowhyphens}{\check{c}}}
+  \declare@shorthand{slovak}{^d}{\textormath{\q{d}\allowhyphens}{\check{d}}}
+  \declare@shorthand{slovak}{^l}{\textormath{\q{l}\allowhyphens}{\check{l}}}
+  \declare@shorthand{slovak}{^n}{\textormath{\v{n}\allowhyphens}{\check{n}}}
+  \declare@shorthand{slovak}{^o}{\textormath{\^{o}\allowhyphens}{\hat{o}}}
+  \declare@shorthand{slovak}{^s}{\textormath{\v{s}\allowhyphens}{\check{s}}}
+  \declare@shorthand{slovak}{^t}{\textormath{\q{t}\allowhyphens}{\check{t}}}
+  \declare@shorthand{slovak}{^z}{\textormath{\v{z}\allowhyphens}{\check{z}}}
+  \declare@shorthand{slovak}{^C}{\textormath{\v{C}\allowhyphens}{\check{C}}}
+  \declare@shorthand{slovak}{^D}{\textormath{\v{D}\allowhyphens}{\check{D}}}
+  \declare@shorthand{slovak}{^L}{\textormath{\q{L}\allowhyphens}{\check{L}}}
+  \declare@shorthand{slovak}{^N}{\textormath{\v{N}\allowhyphens}{\check{N}}}
+  \declare@shorthand{slovak}{^O}{\textormath{\^{O}\allowhyphens}{\hat{O}}}
+  \declare@shorthand{slovak}{^S}{\textormath{\v{S}\allowhyphens}{\check{S}}}
+  \declare@shorthand{slovak}{^T}{\textormath{\v{T}\allowhyphens}{\check{T}}}
+  \declare@shorthand{slovak}{^Z}{\textormath{\v{Z}\allowhyphens}{\check{Z}}}
+%    \end{macrocode}
+%     acute accents,
+%    \begin{macrocode}
+  \@ifpackagewith{babel}{activeacute}{%
+    \declare@shorthand{slovak}{'a}{\textormath{\'a\allowhyphens}{^{\prime}a}}
+    \declare@shorthand{slovak}{'e}{\textormath{\'e\allowhyphens}{^{\prime}e}}
+    \declare@shorthand{slovak}{'i}{\textormath{\'\i{}\allowhyphens}{^{\prime}i}}
+    \declare@shorthand{slovak}{'l}{\textormath{\'l\allowhyphens}{^{\prime}l}}
+    \declare@shorthand{slovak}{'o}{\textormath{\'o\allowhyphens}{^{\prime}o}}
+    \declare@shorthand{slovak}{'r}{\textormath{\'r\allowhyphens}{^{\prime}r}}
+    \declare@shorthand{slovak}{'u}{\textormath{\'u\allowhyphens}{^{\prime}u}}
+    \declare@shorthand{slovak}{'y}{\textormath{\'y\allowhyphens}{^{\prime}y}}
+    \declare@shorthand{slovak}{'A}{\textormath{\'A\allowhyphens}{^{\prime}A}}
+    \declare@shorthand{slovak}{'E}{\textormath{\'E\allowhyphens}{^{\prime}E}}
+    \declare@shorthand{slovak}{'I}{\textormath{\'I\allowhyphens}{^{\prime}I}}
+    \declare@shorthand{slovak}{'L}{\textormath{\'L\allowhyphens}{^{\prime}l}}
+    \declare@shorthand{slovak}{'O}{\textormath{\'O\allowhyphens}{^{\prime}O}}
+    \declare@shorthand{slovak}{'R}{\textormath{\'R\allowhyphens}{^{\prime}R}}
+    \declare@shorthand{slovak}{'U}{\textormath{\'U\allowhyphens}{^{\prime}U}}
+    \declare@shorthand{slovak}{'Y}{\textormath{\'Y\allowhyphens}{^{\prime}Y}}
+    \declare@shorthand{slovak}{''}{%
+      \textormath{\textquotedblright}{\sp\bgroup\prim@s'}}
+    }{}
+  %    \end{macrocode}
+%    and some additional commands:
+%    \begin{macrocode}
+  \declare@shorthand{slovak}{"-}{\nobreak\-\bbl@allowhyphens}
+  \declare@shorthand{slovak}{"|}{%
+    \textormath{\penalty\@M\discretionary{-}{}{\kern.03em}%
+                \bbl@allowhyphens}{}}
+  \declare@shorthand{slovak}{""}{\hskip\z@skip}
+  \declare@shorthand{slovak}{"~}{\textormath{\leavevmode\hbox{-}}{-}}
+  \declare@shorthand{slovak}{"=}{\cs@splithyphen}
+\fi
+%    \end{macrocode}
+%
+%  \begin{macro}{\v}
+%    \LaTeX's normal |\v| accent places a caron over the letter that
+%    follows it (\v{o}). This is not what we want for the letters d,
+%    t, l and L; for those the accent should change shape. This is
+%    acheived by the following.
+%    \begin{macrocode}
+\AtBeginDocument{%
+  \DeclareTextCompositeCommand{\v}{OT1}{t}{%
+    t\kern-.23em\raise.24ex\hbox{'}}
+  \DeclareTextCompositeCommand{\v}{OT1}{d}{%
+    d\kern-.13em\raise.24ex\hbox{'}}
+  \DeclareTextCompositeCommand{\v}{OT1}{l}{\lcaron{}}
+  \DeclareTextCompositeCommand{\v}{OT1}{L}{\Lcaron{}}}
+%    \end{macrocode}
+%
+%  \begin{macro}{\lcaron}
+%  \begin{macro}{\Lcaron}
+%    For the letters \texttt{l} and \texttt{L} we want to disinguish
+%    between normal fonts and monospaced fonts.
+%    \begin{macrocode}
+\def\lcaron{%
+  \setbox0\hbox{M}\setbox\tw@\hbox{i}%
+  \ifdim\wd0>\wd\tw@\relax
+    l\kern-.13em\raise.24ex\hbox{'}\kern-.11em%
+  \else
+    l\raise.45ex\hbox to\z@{\kern-.35em '\hss}%
+  \fi}
+\def\Lcaron{%
+  \setbox0\hbox{M}\setbox\tw@\hbox{i}%
+  \ifdim\wd0>\wd\tw@\relax
+    L\raise.24ex\hbox to\z@{\kern-.28em'\hss}%
+  \else
+    L\raise.45ex\hbox to\z@{\kern-.40em '\hss}%
+  \fi}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%
+%    Initialize active quotes.  \CS\LaTeX{} provides a way of
+%    converting English-style quotes into Slovak-style ones.  Both
+%    single and double quotes are affected, i.e. |``text''| is
+%    converted to something like |,,text``| and |`text'| is converted
+%    to |,text`|.  This conversion can be switched on and off with
+%    \cs{csprimeson} and \cs{csprimesoff}.\footnote{By the way, the
+%    names of these macros are misleading, because the handling of
+%    primes in math mode is rather marginal, the most important thing
+%    being the handling of quotes\ldots}
+%
+%    These quotes present various troubles, e.g. the kerning is broken,
+%    apostrophes are converted to closing single quote, some primitives
+%    are broken (most notably the |\catcode`\|\meta{char} syntax will
+%    not work any more), and writing them to \file{.aux} files cannot
+%    be handled correctly.  For these reasons, these commands are only
+%    available in \CS\LaTeX{} compatibility mode.
+%
+%    \begin{macrocode}
+\ifx\cs@compat@latex\relax
+  \let\cs@ltxprim@s\prim@s
+  \def\csprimeson{%
+    \catcode``\active \catcode`'\active \let\prim@s\bbl@prim@s}
+  \def\csprimesoff{%
+    \catcode``12 \catcode`'12 \let\prim@s\cs@ltxprim@s}
+  \begingroup\catcode``\active
+  \def\x{\endgroup
+    \def`{\futurelet\cs@next\cs@openquote}
+    \def\cs@openquote{%
+      \ifx`\cs@next \expandafter\cs@opendq
+      \else \expandafter\clq
+      \fi}%
+  }\x
+  \begingroup\catcode`'\active
+  \def\x{\endgroup
+    \def'{\textormath{\futurelet\cs@next\cs@closequote}
+                     {^\bgroup\prim@s}}
+    \def\cs@closequote{%
+      \ifx'\cs@next \expandafter\cs@closedq
+      \else \expandafter\crq
+      \fi}%
+  }\x
+  \def\cs@opendq{\clqq\let\cs@next= }
+  \def\cs@closedq{\crqq\let\cs@next= }
+%    \end{macrocode}
+%
+%    The way I recommend for typesetting quotes in Slovak documents
+%    is to use shorthands similar to those used in German.
+%    
+% \changes{3.0}{2006/04/21}{|"`| and |"'| changed from German quotes
+%   to Slovak quotes}
+%    \begin{macrocode}
+\else
+  \declare@shorthand{slovak}{"`}{\clqq}
+  \declare@shorthand{slovak}{"'}{\crqq}
+  \declare@shorthand{slovak}{"<}{\flqq}
+  \declare@shorthand{slovak}{">}{\frqq}
+\fi
+%    \end{macrocode}
+%
+%  \begin{macro}{\clqq}
+%    This is the CS opening quote, which is similar to the German
+%    quote (\cs{glqq}) but the kerning is different.
+%
+%    For the OT1 encoding, the quote is constructed from the right
+%    double quote (i.e. the ``Opening quotes'' character) by moving
+%    it down to the baseline and shifting it to the right, or to the
+%    left if italic correction is positive.
+%
+%    For T1, the ``German Opening quotes'' is used.  It is moved to
+%    the right and the total width is enlarged.  This is done in an
+%    attempt to minimize the difference between the OT1 and T1
+%    versions.
+%
+% \changes{3.0}{2006/04/20}{Added \cs{leavevmode} to allow an opening
+%   quote at the beginning of a paragraph}
+%    \begin{macrocode}
+\ProvideTextCommand{\clqq}{OT1}{%
+  \set@low@box{\textquotedblright}%
+  \setbox\@ne=\hbox{l\/}\dimen\@ne=\wd\@ne
+  \setbox\@ne=\hbox{l}\advance\dimen\@ne-\wd\@ne
+  \leavevmode
+  \ifdim\dimen\@ne>\z@\kern-.1em\box\z@\kern.1em
+    \else\kern.1em\box\z@\kern-.1em\fi\allowhyphens}
+\ProvideTextCommand{\clqq}{T1}
+  {\kern.1em\quotedblbase\kern-.0158em\relax}
+\ProvideTextCommandDefault{\clqq}{\UseTextSymbol{OT1}\clqq}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\crqq}
+%    For OT1, the CS closing quote is basically the same as
+%    \cs{grqq}, only the \cs{textormath} macro is not used, because
+%    as far as I know, \cs{grqq} does not work in math mode anyway.
+%
+%    For T1, the character is slightly wider and shifted to the
+%    right to match its OT1 counterpart.
+%
+%    \begin{macrocode}
+\ProvideTextCommand{\crqq}{OT1}
+  {\save@sf@q{\nobreak\kern-.07em\textquotedblleft\kern.07em}}
+\ProvideTextCommand{\crqq}{T1}
+  {\save@sf@q{\nobreak\kern.06em\textquotedblleft\kern.024em}}
+\ProvideTextCommandDefault{\crqq}{\UseTextSymbol{OT1}\crqq}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\clq}
+%  \begin{macro}{\crq}
+%
+%    Single CS quotes are similar to double quotes (see the
+%    discussion above).
+%
+%    \begin{macrocode}
+\ProvideTextCommand{\clq}{OT1}
+  {\set@low@box{\textquoteright}\box\z@\kern.04em\allowhyphens}
+\ProvideTextCommand{\clq}{T1}
+  {\quotesinglbase\kern-.0428em\relax}
+\ProvideTextCommandDefault{\clq}{\UseTextSymbol{OT1}\clq}
+\ProvideTextCommand{\crq}{OT1}
+  {\save@sf@q{\nobreak\textquoteleft\kern.17em}}
+\ProvideTextCommand{\crq}{T1}
+  {\save@sf@q{\nobreak\textquoteleft\kern.17em}}
+\ProvideTextCommandDefault{\crq}{\UseTextSymbol{OT1}\crq}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\uv}
+%    There are two versions of \cs{uv}.  The older one opens a group
+%    and uses \cs{aftergroup} to typeset the closing quotes.  This
+%    version allows using \cs{verb} inside the quotes, because the
+%    enclosed text is not passed as an argument, but unfortunately
+%    it breaks any kerning with the quotes.  Although the kerning
+%    with the opening quote could be fixed, the kerning with the
+%    closing quote cannot.
+%
+%    The newer version is defined as a command with one parameter.
+%    It preserves kerning but since the quoted text is passed as an
+%    argument, it cannot contain \cs{verb}.
+%
+%    Decide which version of \cs{uv} should be used.  For sake
+%    of compatibility, we use the older version with plain \TeX{}
+%    and the newer version with \LaTeXe.
+%    \begin{macrocode}
+\ifx\cs@compat@plain\@undefined\else\let\cs@olduv=\relax\fi
+\ifx\cs@olduv\@undefined
+  \DeclareRobustCommand\uv[1]{{\leavevmode\clqq#1\crqq}}
+\else
+  \DeclareRobustCommand\uv{\bgroup\aftergroup\closequotes
+    \leavevmode\clqq\let\cs@next=}
+  \def\closequotes{\unskip\crqq\relax}
+\fi
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@wordlen}
+%    Declare a counter to hold the length of the word after the
+%    hyphen.
+%
+%    \begin{macrocode}
+\newcount\cs@wordlen
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@hyphen}
+%  \begin{macro}{\cs@endash}
+%  \begin{macro}{\cs@emdash}
+%    Store the original hyphen in a macro. Ditto for the ligatures.
+%
+% \changes{slovak-3.1}{2006/10/07}{ensure correct catcode for the
+%    saved hyphen}
+%    \begin{macrocode}
+\begingroup\catcode`\-12
+\def\x{\endgroup
+  \def\cs@hyphen{-}
+  \def\cs@endash{--}
+  \def\cs@emdash{---}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@boxhyphen}
+%    Provide a non-breakable hyphen to be used when a compound word
+%    is too short to be split, i.e. the second part is shorter than
+%    \cs{righthyphenmin}.
+%
+%    \begin{macrocode}
+  \def\cs@boxhyphen{\hbox{-}}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@splithyphen}
+%    The macro \cs{cs@splithyphen} inserts a split hyphen, while
+%    allowing both parts of the compound word to be hyphenated at
+%    other places too.
+%
+%    \begin{macrocode}
+  \def\cs@splithyphen{\kern\z@
+    \discretionary{-}{\char\hyphenchar\the\font}{-}\nobreak\hskip\z@}
+}\x
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{-}
+%    To minimize the effects of activating the hyphen character,
+%    the active definition expands to the non-active character
+%    in all cases where hyphenation cannot occur, i.e. if not
+%    typesetting (check \cs{protect}), not in horizontal mode,
+%    or in inner horizontal mode.
+%
+%    \begin{macrocode}
+\initiate@active@char{-}
+\declare@shorthand{slovak}{-}{%
+  \ifx\protect\@typeset@protect
+    \ifhmode
+      \ifinner
+        \bbl@afterelse\bbl@afterelse\bbl@afterelse\cs@hyphen
+      \else
+        \bbl@afterfi\bbl@afterelse\bbl@afterelse\cs@firsthyphen
+      \fi
+    \else
+      \bbl@afterfi\bbl@afterelse\cs@hyphen
+    \fi
+  \else
+    \bbl@afterfi\cs@hyphen
+  \fi}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@firsthyphen}
+%  \begin{macro}{\cs@firsthyph@n}
+%  \begin{macro}{\cs@secondhyphen}
+%  \begin{macro}{\cs@secondhyph@n}
+%    If we encounter a hyphen, check whether it is followed
+%    by a second or a third hyphen and if so, insert the
+%    corresponding ligature.
+%
+%    If we don't find a hyphen, the token found will be placed
+%    in \cs{cs@token} for further analysis, and it will also stay
+%    in the input.
+%
+%    \begin{macrocode}
+\begingroup\catcode`\-\active
+\def\x{\endgroup
+  \def\cs@firsthyphen{\futurelet\cs@token\cs@firsthyph@n}
+  \def\cs@firsthyph@n{%
+    \ifx -\cs@token
+      \bbl@afterelse\cs@secondhyphen
+    \else
+      \bbl@afterfi\cs@checkhyphen
+    \fi}
+  \def\cs@secondhyphen ##1{%
+    \futurelet\cs@token\cs@secondhyph@n}
+  \def\cs@secondhyph@n{%
+    \ifx -\cs@token
+      \bbl@afterelse\cs@emdash\@gobble
+    \else
+      \bbl@afterfi\cs@endash
+    \fi}
+}\x
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@checkhyphen}
+%    Check that hyphenation is enabled, and if so, start analyzing
+%    the rest of the word, i.e. initialize \cs{cs@word} and \cs{cs@wordlen}
+%    and start processing input with \cs{cs@scanword}.
+%
+%    \begin{macrocode}
+\def\cs@checkhyphen{%
+  \ifnum\expandafter\hyphenchar\the\font=`\-
+    \def\cs@word{}\cs@wordlen\z@
+    \bbl@afterelse\cs@scanword
+  \else
+    \cs@hyphen
+  \fi}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@scanword}
+%  \begin{macro}{\cs@continuescan}
+%  \begin{macro}{\cs@gettoken}
+%  \begin{macro}{\cs@gett@ken}
+%    Each token is first analyzed with \cs{cs@scanword}, which expands
+%    the token and passes the first token of the result to
+%    \cs{cs@gett@ken}. If the expanded token is not identical to the
+%    unexpanded one, presume that it might be expanded further and
+%    pass it back to \cs{cs@scanword} until you get an unexpandable
+%    token. Then analyze it in \cs{cs@examinetoken}.
+%
+%    The \cs{cs@continuescan} macro does the same thing as
+%    \cs{cs@scanword}, but it does not require the first token to be
+%    in \cs{cs@token} already.
+%
+%    \begin{macrocode}
+\def\cs@scanword{\let\cs@lasttoken= \cs@token\expandafter\cs@gettoken}
+\def\cs@continuescan{\let\cs@lasttoken\@undefined\expandafter\cs@gettoken}
+\def\cs@gettoken{\futurelet\cs@token\cs@gett@ken}
+\def\cs@gett@ken{%
+  \ifx\cs@token\cs@lasttoken \def\cs@next{\cs@examinetoken}%
+  \else \def\cs@next{\cs@scanword}%
+  \fi \cs@next}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{cs@examinetoken}
+%    Examine the token in \cs{cs@token}:
+%
+%    \begin{itemize}
+%    \item
+%      If it is a letter (catcode 11) or other (catcode 12), add it
+%      to \cs{cs@word} with \cs{cs@addparam}.
+%
+%    \item
+%      If it is the \cs{char} primitive, add it with \cs{cs@expandchar}.
+%
+%    \item
+%      If the token starts or ends a group, ignore it with
+%      \cs{cs@ignoretoken}.
+%
+%    \item
+%      Otherwise analyze the meaning of the token with
+%      \cs{cs@checkchardef} to detect primitives defined with
+%      \cs{chardef}.
+%
+%    \end{itemize}
+%
+%    \begin{macrocode}
+\def\cs@examinetoken{%
+  \ifcat A\cs@token
+    \def\cs@next{\cs@addparam}%
+  \else\ifcat 0\cs@token
+    \def\cs@next{\cs@addparam}%
+  \else\ifx\char\cs@token
+    \def\cs@next{\afterassignment\cs@expandchar\let\cs@token= }%
+  \else\ifx\bgroup\cs@token
+    \def\cs@next{\cs@ignoretoken\bgroup}%
+  \else\ifx\egroup\cs@token
+    \def\cs@next{\cs@ignoretoken\egroup}%
+  \else\ifx\begingroup\cs@token
+    \def\cs@next{\cs@ignoretoken\begingroup}%
+  \else\ifx\endgroup\cs@token
+    \def\cs@next{\cs@ignoretoken\endgroup}%
+  \else
+    \def\cs@next{\expandafter\expandafter\expandafter\cs@checkchardef
+      \expandafter\meaning\expandafter\cs@token\string\char\end}%
+  \fi\fi\fi\fi\fi\fi\fi\cs@next}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@checkchardef}
+%    Check the meaning of a token and if it is a primitive defined
+%    with \cs{chardef}, pass it to \cs{\cs@examinechar} as if it were
+%    a \cs{char} sequence. Otherwise, there are no more word characters,
+%    so do the final actions in \cs{cs@nosplit}.
+%
+%    \begin{macrocode}
+\expandafter\def\expandafter\cs@checkchardef
+  \expandafter#\expandafter1\string\char#2\end{%
+    \def\cs@token{#1}%
+    \ifx\cs@token\@empty
+      \def\cs@next{\afterassignment\cs@examinechar\let\cs@token= }%
+    \else
+      \def\cs@next{\cs@nosplit}%
+    \fi \cs@next}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@ignoretoken}
+%    Add a token to \cs{cs@word} but do not update the \cs{cs@wordlen}
+%    counter. This is mainly useful for group starting and ending
+%    primitives, which need to be preserved, but do not affect the word
+%    boundary.
+%
+%    \begin{macrocode}
+\def\cs@ignoretoken#1{%
+  \edef\cs@word{\cs@word#1}%
+  \afterassignment\cs@continuescan\let\cs@token= }
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{cs@addparam}
+%    Add a token to \cs{cs@word} and check its lccode. Note that
+%    this macro can only be used for tokens which can be passed as
+%    a parameter.
+%
+%    \begin{macrocode}
+\def\cs@addparam#1{%
+  \edef\cs@word{\cs@word#1}%
+  \cs@checkcode{\lccode`#1}}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@expandchar}
+%  \begin{macro}{\cs@examinechar}
+%    Add a \cs{char} sequence to \cs{cs@word} and check its lccode.
+%    The charcode is first parsed in \cs{cs@expandchar} and then the
+%    resulting \cs{chardef}-defined sequence is analyzed in
+%    \cs{cs@examinechar}.
+%
+%    \begin{macrocode}
+\def\cs@expandchar{\afterassignment\cs@examinechar\chardef\cs@token=}
+\def\cs@examinechar{%
+  \edef\cs@word{\cs@word\char\the\cs@token\space}%
+  \cs@checkcode{\lccode\cs@token}}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@checkcode}
+%    Check the lccode of a character. If it is zero, it does not count
+%    to the current word, so finish it with \cs{cs@nosplit}. Otherwise
+%    update the \cs{cs@wordlen} counter and go on scanning the word
+%    with \cs{cs@continuescan}. When enough characters are gathered in
+%    \cs{cs@word} to allow word break, insert the split hyphen and
+%    finish.
+%
+%    \begin{macrocode}
+\def\cs@checkcode#1{%
+  \ifnum0=#1
+    \def\cs@next{\cs@nosplit}%
+  \else
+    \advance\cs@wordlen\@ne
+    \ifnum\righthyphenmin>\the\cs@wordlen
+      \def\cs@next{\cs@continuescan}%
+    \else
+      \cs@splithyphen
+      \def\cs@next{\cs@word}%
+    \fi
+  \fi \cs@next}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@nosplit}
+%    Insert a non-breakable hyphen followed by the saved word.
+%
+%    \begin{macrocode}
+\def\cs@nosplit{\cs@boxhyphen\cs@word}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@hyphen}
+%    The \cs{minus} sequence can be used where the active hyphen
+%    does not work, e.g. in arguments to \TeX{} primitives in outer
+%    horizontal mode.
+%
+%    \begin{macrocode}
+\let\minus\cs@hyphen
+%    \end{macrocode}
+%  \end{macro}
+
+%  \begin{macro}{\standardhyphens}
+%  \begin{macro}{\splithyphens}
+%    These macros control whether split hyphens are allowed in Czech
+%    and/or Slovak texts. You may use them in any language, but the
+%    split hyphen is only activated for Czech and Slovak.
+%
+% \changes{slovak-3.1}{2006/10/07}{activate with split hyphens and
+%    deactivate with standard hyphens, not vice versa}
+%    \begin{macrocode}
+\def\standardhyphens{\cs@splithyphensfalse\cs@deactivatehyphens}
+\def\splithyphens{\cs@splithyphenstrue\cs@activatehyphens}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@splitattr}
+%    Now we declare the |split| language attribute.  This is
+%    similar to the |split| package option of cslatex, but it
+%    only affects Slovak, not Czech.
+%
+% \changes{slovak-3.1}{2006/10/07}{attribute added}
+%    \begin{macrocode}
+\def\cs@splitattr{\babel@save\ifcs@splithyphens\splithyphens}
+\bbl@declare@ttribute{slovak}{split}{%
+  \addto\extrasslovak{\cs@splitattr}}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@activatehyphens}
+%  \begin{macro}{\cs@deactivatehyphens}
+%    These macros are defined as \cs{relax} by default to prevent
+%    activating/deactivating the hyphen character. They are redefined
+%    when the language is switched to Czech/Slovak. At that moment
+%    the hyphen is also activated if split hyphens were requested with
+%    \cs{splithyphens}.
+%
+%    When the language is de-activated, de-activate the hyphen and
+%    restore the bogus definitions of these macros.
+%
+%    \begin{macrocode}
+\let\cs@activatehyphens\relax
+\let\cs@deactivatehyphens\relax
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \def\cs@activatehyphens{\bbl@activate{-}}%
+  \def\cs@deactivatehyphens{\bbl@deactivate{-}}%
+  \ifcs@splithyphens\cs@activatehyphens\fi}
+\expandafter\addto\csname noextras\CurrentOption\endcsname{%
+  \cs@deactivatehyphens
+  \let\cs@activatehyphens\relax
+  \let\cs@deactivatehyphens\relax}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@looseness}
+%  \begin{macro}{\looseness}
+%    One of the most common situations where an active hyphen will not
+%    work properly is the \cs{looseness} primitive. Change its definition
+%    so that it deactivates the hyphen if needed.
+%
+%    \begin{macrocode}
+\let\cs@looseness\looseness
+\def\looseness{%
+  \ifcs@splithyphens
+    \cs@deactivatehyphens\afterassignment\cs@activatehyphens \fi
+  \cs@looseness}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%  \begin{macro}{\cs@selectlanguage}
+%  \begin{macro}{\cs@main@language}
+%    Specifying the |nocaptions| option means that captions and dates
+%    are not redefined by default, but they can be switched on later
+%    with \cs{captionsslovak} and/or \cs{dateslovak}. 
+%
+%    We mimic this behavior by redefining \cs{selectlanguage}.  This
+%    macro is called once at the beginning of the document to set the
+%    main language of the document.  If this is \cs{cs@main@language},
+%    it disables the macros for setting captions and date.  In any
+%    case, it restores the original definition of \cs{selectlanguage}
+%    and expands it.
+%
+%    The definition of \cs{selectlanguage} can be shared between Czech
+%    and Slovak; the actual language is stored in \cs{cs@main@language}.
+%
+%    \begin{macrocode}
+\ifx\cs@nocaptions\@undefined\else
+  \edef\cs@main@language{\CurrentOption}
+  \ifx\cs@origselect\@undefined
+    \let\cs@origselect=\selectlanguage
+    \def\selectlanguage{%
+      \let\selectlanguage\cs@origselect
+      \ifx\bbl@main@language\cs@main@language
+        \expandafter\cs@selectlanguage
+      \else
+        \expandafter\selectlanguage
+      \fi}
+    \def\cs@selectlanguage{%
+      \cs@tempdisable{captions}%
+      \cs@tempdisable{date}%
+      \selectlanguage}
+%    \end{macrocode}
+%
+%  \begin{macro}{\cs@tempdisable}
+%    \cs{cs@tempdisable} disables a language setup macro temporarily,
+%    i.e. the macro with the name of \meta{\#1}|\bbl@main@language|
+%    just restores the original definition and purges the saved macro
+%    from memory.
+%
+%    \begin{macrocode}
+    \def\cs@tempdisable#1{%
+      \def\@tempa{cs@#1}%
+      \def\@tempb{#1\bbl@main@language}%
+      \expandafter\expandafter\expandafter\let
+        \expandafter \csname\expandafter \@tempa \expandafter\endcsname
+        \csname \@tempb \endcsname
+      \expandafter\edef\csname \@tempb \endcsname{%
+        \let \expandafter\noexpand \csname \@tempb \endcsname
+          \expandafter\noexpand \csname \@tempa \endcsname
+        \let \expandafter\noexpand\csname \@tempa \endcsname
+          \noexpand\@undefined}}
+%    \end{macrocode}
+%  \end{macro}
+%
+%    These macros are not needed, once the initialization is over.
+%
+%    \begin{macrocode}
+    \@onlypreamble\cs@main@language
+    \@onlypreamble\cs@origselect
+    \@onlypreamble\cs@selectlanguage
+    \@onlypreamble\cs@tempdisable
+  \fi
+\fi
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%
+%    The encoding of mathematical fonts should be changed to IL2.  This
+%    allows to use accented letter in some font families.  Besides,
+%    documents do not use CM fonts if there are equivalents in CS-fonts,
+%    so there is no need to have both bitmaps of CM-font and CS-font.
+%
+%    \cs{@font@warning} and \cs{@font@info} are temporarily redefined
+%    to avoid annoying font warnings.
+%
+%    \begin{macrocode}
+\ifx\cs@compat@plain\@undefined
+\ifx\cs@check@enc\@undefined\else
+  \def\cs@check@enc{
+    \ifx\encodingdefault\cs@iltw@
+      \let\cs@warn\@font@warning \let\@font@warning\@gobble
+      \let\cs@info\@font@info    \let\@font@info\@gobble
+      \SetSymbolFont{operators}{normal}{\cs@iltw@}{cmr}{m}{n}
+      \SetSymbolFont{operators}{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathbf{normal}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathit{normal}{\cs@iltw@}{cmr}{m}{it}
+      \SetMathAlphabet\mathrm{normal}{\cs@iltw@}{cmr}{m}{n}
+      \SetMathAlphabet\mathsf{normal}{\cs@iltw@}{cmss}{m}{n}
+      \SetMathAlphabet\mathtt{normal}{\cs@iltw@}{cmtt}{m}{n}
+      \SetMathAlphabet\mathbf{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathit{bold}{\cs@iltw@}{cmr}{bx}{it}
+      \SetMathAlphabet\mathrm{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathsf{bold}{\cs@iltw@}{cmss}{bx}{n}
+      \SetMathAlphabet\mathtt{bold}{\cs@iltw@}{cmtt}{m}{n}
+      \let\@font@warning\cs@warn \let\cs@warn\@undefined
+      \let\@font@info\cs@info    \let\cs@info\@undefined
+    \fi
+    \let\cs@check@enc\@undefined}
+  \AtBeginDocument{\cs@check@enc}
+\fi
+\fi
+%    \end{macrocode}
+%
+%  \begin{macro}{cs@undoiltw@}
+%
+%    The thing is that \LaTeXe{} core only supports the T1 encoding
+%    and does not bother changing the uc/lc/sfcodes when encoding
+%    is switched. :( However, the IL2 encoding \emph{does} change
+%    these codes, so if encoding is switched back from IL2, we must
+%    also undo the effect of this change to be compatible with
+%    \LaTeXe.  OK, this is not the right\textsuperscript{TM} solution
+%    but it works.  Cheers to Petr Ol\v s\'ak.
+%
+%    \begin{macrocode}
+\def\cs@undoiltw@{%
+  \uccode158=208 \lccode158=158 \sfcode158=1000
+  \sfcode159=1000
+  \uccode165=133 \lccode165=165 \sfcode165=1000
+  \uccode169=137 \lccode169=169 \sfcode169=1000
+  \uccode171=139 \lccode171=171 \sfcode171=1000
+  \uccode174=142 \lccode174=174 \sfcode174=1000
+  \uccode181=149
+  \uccode185=153
+  \uccode187=155
+  \uccode190=0   \lccode190=0
+  \uccode254=222 \lccode254=254 \sfcode254=1000
+  \uccode255=223 \lccode255=255 \sfcode255=1000}
+%    \end{macrocode}
+%  \end{macro}
+%
+%  \begin{macro}{@@enc@update}
+%
+%    Redefine the \LaTeXe{} internal function \cs{@@enc@update} to
+%    change the encodings correctly.
+%
+%    \begin{macrocode}
+\ifx\cs@enc@update\@undefined
+\ifx\@@enc@update\@undefined\else
+  \let\cs@enc@update\@@enc@update
+  \def\@@enc@update{\ifx\cf@encoding\cs@iltw@\cs@undoiltw@\fi
+    \cs@enc@update
+    \expandafter\ifnum\csname l@\languagename\endcsname=\the\language
+      \expandafter\ifx
+      \csname l@\languagename:\f@encoding\endcsname\relax
+      \else
+        \expandafter\expandafter\expandafter\let
+          \expandafter\csname
+          \expandafter l\expandafter @\expandafter\languagename
+          \expandafter\endcsname\csname l@\languagename:\f@encoding\endcsname
+      \fi
+      \language=\csname l@\languagename\endcsname\relax
+    \fi}
+\fi\fi
+%    \end{macrocode}
+%  \end{macro}
+%
+%    The macro |\ldf@finish| takes care of looking for a
+%    configuration file, setting the main language to be switched on
+%    at |\begin{document}| and resetting the category code of
+%    \texttt{@} to its original value.
+% \changes{slovak-1.2i}{1996/11/03}{Now use \cs{ldf@finish} to wrap up}
+%    \begin{macrocode}
+\ldf@finish\CurrentOption
+%</code>
+%    \end{macrocode}
+%
+% \Finale
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+\endinput
diff --git a/Master/texmf-dist/source/generic/babel-slovak/slovak.ins b/Master/texmf-dist/source/generic/babel-slovak/slovak.ins
new file mode 100644
index 00000000000..c8c7d88326d
--- /dev/null
+++ b/Master/texmf-dist/source/generic/babel-slovak/slovak.ins
@@ -0,0 +1,148 @@
+%%
+%% This file will generate fast loadable files and documentation
+%% driver files from the doc files in this package when run through
+%% LaTeX or TeX.
+%%
+%% Copyright 1989-2008 Johannes L. Braams and any individual authors
+%% listed elsewhere in this file.  All rights reserved.
+%% 
+%% This file is part of the Babel system.
+%% --------------------------------------
+%% 
+%% It may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2003/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is Johannes Braams.
+%% 
+%% The list of all files belonging to the LaTeX base distribution is
+%% given in the file `manifest.bbl. See also `legal.bbl' for additional
+%% information.
+%% 
+%% The list of derived (unpacked) files belonging to the distribution
+%% and covered by LPPL is defined by the unpacking scripts (with
+%% extension .ins) which are part of the distribution.
+%%
+%% --------------- start of docstrip commands ------------------
+%%
+\def\filedate{1999/04/11}
+\def\batchfile{slovak.ins}
+\input docstrip.tex
+
+{\ifx\generate\undefined
+\Msg{**********************************************}
+\Msg{*}
+\Msg{* This installation requires docstrip}
+\Msg{* version 2.3c or later.}
+\Msg{*}
+\Msg{* An older version of docstrip has been input}
+\Msg{*}
+\Msg{**********************************************}
+\errhelp{Move or rename old docstrip.tex.}
+\errmessage{Old docstrip in input path}
+\batchmode
+\csname @@end\endcsname
+\fi}
+
+\declarepreamble\mainpreamble
+This is a generated file.
+
+Copyright 1989-2008 Johannes L. Braams and any individual authors
+listed elsewhere in this file.  All rights reserved.
+
+This file was generated from file(s) of the Babel system.
+---------------------------------------------------------
+
+It may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2003/12/01 or later.
+
+This work has the LPPL maintenance status "maintained".
+
+The Current Maintainer of this work is Johannes Braams.
+
+This file may only be distributed together with a copy of the Babel
+system. You may however distribute the Babel system without
+such generated files.
+
+The list of all files belonging to the Babel distribution is
+given in the file `manifest.bbl'. See also `legal.bbl for additional
+information.
+
+The list of derived (unpacked) files belonging to the distribution
+and covered by LPPL is defined by the unpacking scripts (with
+extension .ins) which are part of the distribution.
+\endpreamble
+
+\declarepreamble\fdpreamble
+This is a generated file.
+
+Copyright 1989-2008 Johannes L. Braams and any individual authors
+listed elsewhere in this file.  All rights reserved.
+
+This file was generated from file(s) of the Babel system.
+---------------------------------------------------------
+
+It may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2003/12/01 or later.
+
+This work has the LPPL maintenance status "maintained".
+
+The Current Maintainer of this work is Johannes Braams.
+
+This file may only be distributed together with a copy of the Babel
+system. You may however distribute the Babel system without
+such generated files.
+
+The list of all files belonging to the Babel distribution is
+given in the file `manifest.bbl'. See also `legal.bbl for additional
+information.
+
+In particular, permission is granted to customize the declarations in
+this file to serve the needs of your installation.
+
+However, NO PERMISSION is granted to distribute a modified version
+of this file under its original name.
+
+\endpreamble
+
+\keepsilent
+
+\usedir{tex/generic/babel} 
+
+\usepreamble\mainpreamble
+\generate{\file{slovak.ldf}{\from{slovak.dtx}{code}}
+          }
+\usepreamble\fdpreamble
+
+\ifToplevel{
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* files into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space All *.def, *.fd, *.ldf, *.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the files ending with}
+\Msg{* '.dtx' and `.fdd' through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing}
+\Msg{***********************************************************}
+}
+ 
+\endinput
diff --git a/Master/texmf-dist/tex/generic/babel-slovak/slovak.ldf b/Master/texmf-dist/tex/generic/babel-slovak/slovak.ldf
new file mode 100644
index 00000000000..8940617958a
--- /dev/null
+++ b/Master/texmf-dist/tex/generic/babel-slovak/slovak.ldf
@@ -0,0 +1,520 @@
+%%
+%% This is file `slovak.ldf',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% slovak.dtx  (with options: `code')
+%% This is a generated file.
+%% 
+%% Copyright 1989-2008 Johannes L. Braams and any individual authors
+%% listed elsewhere in this file.  All rights reserved.
+%% 
+%% This file was generated from file(s) of the Babel system.
+%% ---------------------------------------------------------
+%% 
+%% It may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2003/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "maintained".
+%% 
+%% The Current Maintainer of this work is Johannes Braams.
+%% 
+%% This file may only be distributed together with a copy of the Babel
+%% system. You may however distribute the Babel system without
+%% such generated files.
+%% 
+%% The list of all files belonging to the Babel distribution is
+%% given in the file `manifest.bbl'. See also `legal.bbl for additional
+%% information.
+%% 
+%% The list of derived (unpacked) files belonging to the distribution
+%% and covered by LPPL is defined by the unpacking scripts (with
+%% extension .ins) which are part of the distribution.
+\ProvidesLanguage{slovak}
+        [2008/07/06 v3.1a Slovak support from the babel system]
+%% File `slovak.dtx'
+%% Babel package for LaTeX version 2e
+%% Copyright (C) 1989 - 2008
+%%           by Johannes Braams, TeXniek
+%% Slovak Language Definition File
+%% Copyright (C) 1989 - 2001
+%%           by Jana Chlebikova
+%% Copyright (C) 2002-2005
+%%           by Tobias Schlemmer
+%% Copyright (C) 2005-2008
+%%           by Petr Tesa\v r\'ik (babel at tesarici.cz)
+%% Please report errors to: Petr Tesa\v r\'ik
+%%                          babel at tesarici.cz
+\LdfInit\CurrentOption{date\CurrentOption}
+\ifx\l@slovak\@undefined
+    \@nopatterns{Slovak}
+    \adddialect\l@slovak0\fi
+\def\cs@iltw@{IL2}
+\newif\ifcs@splithyphens
+\cs@splithyphensfalse
+\ifx\@ifpackageloaded\@undefined
+  \let\cs@compat@plain\relax
+  \message{csplain compatibility mode}
+\else
+  \@ifpackageloaded{babel}{}{%
+    \let\cs@compat@latex\relax
+    \message{cslatex compatibility mode}}
+\fi
+\ifx\cs@compat@latex\relax
+  \ProvidesPackage{slovak}[2008/07/06 v3.1a CSTeX Slovak style]
+  \DeclareOption{IL2}{\def\encodingdefault{IL2}}
+  \DeclareOption {T1}{\def\encodingdefault {T1}}
+  \DeclareOption{OT1}{\def\encodingdefault{OT1}}
+  \DeclareOption{nosplit}{\cs@splithyphensfalse}
+  \DeclareOption{split}{\cs@splithyphenstrue}
+  \DeclareOption{nocaptions}{\let\cs@nocaptions=\relax}
+  \DeclareOption{olduv}{\let\cs@olduv=\relax}
+  \DeclareOption{cstex}{\relax}
+  \ExecuteOptions{\cs@iltw@}
+  \ProcessOptions
+  \ifx\encodingdefault\cs@iltw@
+    \input il2enc.def
+  \fi
+  \def\CurrentOption{slovak}
+\fi
+\@namedef{captions\CurrentOption}{%
+  \def\prefacename{Predhovor}%
+  \def\refname{Literat\'ura}%
+  \def\abstractname{Abstrakt}%
+  \def\bibname{Literat\'ura}%
+  \def\chaptername{Kapitola}%
+  \def\appendixname{Dodatok}%
+  \def\contentsname{Obsah}%
+  \def\listfigurename{Zoznam obr\'azkov}%
+  \def\listtablename{Zoznam tabuliek}%
+  \def\indexname{Register}%
+  \def\figurename{Obr.}%
+  \def\tablename{Tabu\v{l}ka}%
+  \def\partname{\v{C}as\v{t}}%
+  \def\enclname{Pr\'{\i}loha}%
+  \def\ccname{cc.}%
+  \def\headtoname{Pre}%
+  \def\pagename{Str.}%
+  \def\seename{vi\v{d}}%
+  \def\alsoname{vi\v{d} tie\v{z}}%
+  \def\proofname{D\^okaz}%
+  \def\glossaryname{Slovn\'{\i}k}%
+  }%
+\@namedef{date\CurrentOption}{%
+  \def\today{\number\day.~\ifcase\month\or
+    janu\'ara\or febru\'ara\or marca\or apr\'{\i}la\or m\'aja\or
+    j\'una\or j\'ula\or augusta\or septembra\or okt\'obra\or
+    novembra\or decembra\fi
+    \space \number\year}}
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \bbl@frenchspacing
+  \languageshorthands{slovak}}
+\expandafter\addto\csname noextras\CurrentOption\endcsname{%
+  \bbl@nonfrenchspacing}
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \babel@save\q\let\q\v}
+\ifx\cs@compat@latex\relax\else
+  \initiate@active@char{^}
+  \addto\extrasslovak{\bbl@activate{^}}
+  \addto\noextrasslovak{\bbl@deactivate{^}}
+  \initiate@active@char{"}
+  \addto\extrasslovak{\bbl@activate{"}\umlautlow}
+  \addto\noextrasslovak{\bbl@deactivate{"}\umlauthigh}
+  \initiate@active@char{'}
+  \@ifpackagewith{babel}{activeacute}{%
+    \addto\extrasslovak{\bbl@activate{'}}
+    \addto\noextrasslovak{\bbl@deactivate{'}}%
+    }{}
+\fi
+\begingroup\catcode`\"=12\catcode`\'=12
+\def\x{\endgroup
+  \def\sq{'}
+  \def\dq{"}}
+\x
+\providehyphenmins{\CurrentOption}{\tw@\thr@@}
+\ifx\cs@compat@latex\relax\else
+  \declare@shorthand{system}{^}{\csname normal@char\string^\endcsname}
+  \declare@shorthand{slovak}{"a}{\textormath{\"{a}\allowhyphens}{\ddot a}}
+  \declare@shorthand{slovak}{"o}{\textormath{\"{o}\allowhyphens}{\ddot o}}
+  \declare@shorthand{slovak}{"u}{\textormath{\"{u}\allowhyphens}{\ddot u}}
+  \declare@shorthand{slovak}{"A}{\textormath{\"{A}\allowhyphens}{\ddot A}}
+  \declare@shorthand{slovak}{"O}{\textormath{\"{O}\allowhyphens}{\ddot O}}
+  \declare@shorthand{slovak}{"U}{\textormath{\"{U}\allowhyphens}{\ddot U}}
+  \declare@shorthand{slovak}{"e}{\textormath{\"{e}\allowhyphens}{\ddot e}}
+  \declare@shorthand{slovak}{"E}{\textormath{\"{E}\allowhyphens}{\ddot E}}
+  \declare@shorthand{slovak}{"i}{\textormath{\"{\i}\allowhyphens}%
+                                {\ddot\imath}}
+  \declare@shorthand{slovak}{"I}{\textormath{\"{I}\allowhyphens}{\ddot I}}
+  \declare@shorthand{slovak}{^c}{\textormath{\v{c}\allowhyphens}{\check{c}}}
+  \declare@shorthand{slovak}{^d}{\textormath{\q{d}\allowhyphens}{\check{d}}}
+  \declare@shorthand{slovak}{^l}{\textormath{\q{l}\allowhyphens}{\check{l}}}
+  \declare@shorthand{slovak}{^n}{\textormath{\v{n}\allowhyphens}{\check{n}}}
+  \declare@shorthand{slovak}{^o}{\textormath{\^{o}\allowhyphens}{\hat{o}}}
+  \declare@shorthand{slovak}{^s}{\textormath{\v{s}\allowhyphens}{\check{s}}}
+  \declare@shorthand{slovak}{^t}{\textormath{\q{t}\allowhyphens}{\check{t}}}
+  \declare@shorthand{slovak}{^z}{\textormath{\v{z}\allowhyphens}{\check{z}}}
+  \declare@shorthand{slovak}{^C}{\textormath{\v{C}\allowhyphens}{\check{C}}}
+  \declare@shorthand{slovak}{^D}{\textormath{\v{D}\allowhyphens}{\check{D}}}
+  \declare@shorthand{slovak}{^L}{\textormath{\q{L}\allowhyphens}{\check{L}}}
+  \declare@shorthand{slovak}{^N}{\textormath{\v{N}\allowhyphens}{\check{N}}}
+  \declare@shorthand{slovak}{^O}{\textormath{\^{O}\allowhyphens}{\hat{O}}}
+  \declare@shorthand{slovak}{^S}{\textormath{\v{S}\allowhyphens}{\check{S}}}
+  \declare@shorthand{slovak}{^T}{\textormath{\v{T}\allowhyphens}{\check{T}}}
+  \declare@shorthand{slovak}{^Z}{\textormath{\v{Z}\allowhyphens}{\check{Z}}}
+  \@ifpackagewith{babel}{activeacute}{%
+    \declare@shorthand{slovak}{'a}{\textormath{\'a\allowhyphens}{^{\prime}a}}
+    \declare@shorthand{slovak}{'e}{\textormath{\'e\allowhyphens}{^{\prime}e}}
+    \declare@shorthand{slovak}{'i}{\textormath{\'\i{}\allowhyphens}{^{\prime}i}}
+    \declare@shorthand{slovak}{'l}{\textormath{\'l\allowhyphens}{^{\prime}l}}
+    \declare@shorthand{slovak}{'o}{\textormath{\'o\allowhyphens}{^{\prime}o}}
+    \declare@shorthand{slovak}{'r}{\textormath{\'r\allowhyphens}{^{\prime}r}}
+    \declare@shorthand{slovak}{'u}{\textormath{\'u\allowhyphens}{^{\prime}u}}
+    \declare@shorthand{slovak}{'y}{\textormath{\'y\allowhyphens}{^{\prime}y}}
+    \declare@shorthand{slovak}{'A}{\textormath{\'A\allowhyphens}{^{\prime}A}}
+    \declare@shorthand{slovak}{'E}{\textormath{\'E\allowhyphens}{^{\prime}E}}
+    \declare@shorthand{slovak}{'I}{\textormath{\'I\allowhyphens}{^{\prime}I}}
+    \declare@shorthand{slovak}{'L}{\textormath{\'L\allowhyphens}{^{\prime}l}}
+    \declare@shorthand{slovak}{'O}{\textormath{\'O\allowhyphens}{^{\prime}O}}
+    \declare@shorthand{slovak}{'R}{\textormath{\'R\allowhyphens}{^{\prime}R}}
+    \declare@shorthand{slovak}{'U}{\textormath{\'U\allowhyphens}{^{\prime}U}}
+    \declare@shorthand{slovak}{'Y}{\textormath{\'Y\allowhyphens}{^{\prime}Y}}
+    \declare@shorthand{slovak}{''}{%
+      \textormath{\textquotedblright}{\sp\bgroup\prim@s'}}
+    }{}
+  %    \end{macrocode}
+  \declare@shorthand{slovak}{"-}{\nobreak\-\bbl@allowhyphens}
+  \declare@shorthand{slovak}{"|}{%
+    \textormath{\penalty\@M\discretionary{-}{}{\kern.03em}%
+                \bbl@allowhyphens}{}}
+  \declare@shorthand{slovak}{""}{\hskip\z@skip}
+  \declare@shorthand{slovak}{"~}{\textormath{\leavevmode\hbox{-}}{-}}
+  \declare@shorthand{slovak}{"=}{\cs@splithyphen}
+\fi
+\AtBeginDocument{%
+  \DeclareTextCompositeCommand{\v}{OT1}{t}{%
+    t\kern-.23em\raise.24ex\hbox{'}}
+  \DeclareTextCompositeCommand{\v}{OT1}{d}{%
+    d\kern-.13em\raise.24ex\hbox{'}}
+  \DeclareTextCompositeCommand{\v}{OT1}{l}{\lcaron{}}
+  \DeclareTextCompositeCommand{\v}{OT1}{L}{\Lcaron{}}}
+\def\lcaron{%
+  \setbox0\hbox{M}\setbox\tw@\hbox{i}%
+  \ifdim\wd0>\wd\tw@\relax
+    l\kern-.13em\raise.24ex\hbox{'}\kern-.11em%
+  \else
+    l\raise.45ex\hbox to\z@{\kern-.35em '\hss}%
+  \fi}
+\def\Lcaron{%
+  \setbox0\hbox{M}\setbox\tw@\hbox{i}%
+  \ifdim\wd0>\wd\tw@\relax
+    L\raise.24ex\hbox to\z@{\kern-.28em'\hss}%
+  \else
+    L\raise.45ex\hbox to\z@{\kern-.40em '\hss}%
+  \fi}
+\ifx\cs@compat@latex\relax
+  \let\cs@ltxprim@s\prim@s
+  \def\csprimeson{%
+    \catcode``\active \catcode`'\active \let\prim@s\bbl@prim@s}
+  \def\csprimesoff{%
+    \catcode``12 \catcode`'12 \let\prim@s\cs@ltxprim@s}
+  \begingroup\catcode``\active
+  \def\x{\endgroup
+    \def`{\futurelet\cs@next\cs@openquote}
+    \def\cs@openquote{%
+      \ifx`\cs@next \expandafter\cs@opendq
+      \else \expandafter\clq
+      \fi}%
+  }\x
+  \begingroup\catcode`'\active
+  \def\x{\endgroup
+    \def'{\textormath{\futurelet\cs@next\cs@closequote}
+                     {^\bgroup\prim@s}}
+    \def\cs@closequote{%
+      \ifx'\cs@next \expandafter\cs@closedq
+      \else \expandafter\crq
+      \fi}%
+  }\x
+  \def\cs@opendq{\clqq\let\cs@next= }
+  \def\cs@closedq{\crqq\let\cs@next= }
+\else
+  \declare@shorthand{slovak}{"`}{\clqq}
+  \declare@shorthand{slovak}{"'}{\crqq}
+  \declare@shorthand{slovak}{"<}{\flqq}
+  \declare@shorthand{slovak}{">}{\frqq}
+\fi
+\ProvideTextCommand{\clqq}{OT1}{%
+  \set@low@box{\textquotedblright}%
+  \setbox\@ne=\hbox{l\/}\dimen\@ne=\wd\@ne
+  \setbox\@ne=\hbox{l}\advance\dimen\@ne-\wd\@ne
+  \leavevmode
+  \ifdim\dimen\@ne>\z@\kern-.1em\box\z@\kern.1em
+    \else\kern.1em\box\z@\kern-.1em\fi\allowhyphens}
+\ProvideTextCommand{\clqq}{T1}
+  {\kern.1em\quotedblbase\kern-.0158em\relax}
+\ProvideTextCommandDefault{\clqq}{\UseTextSymbol{OT1}\clqq}
+\ProvideTextCommand{\crqq}{OT1}
+  {\save@sf@q{\nobreak\kern-.07em\textquotedblleft\kern.07em}}
+\ProvideTextCommand{\crqq}{T1}
+  {\save@sf@q{\nobreak\kern.06em\textquotedblleft\kern.024em}}
+\ProvideTextCommandDefault{\crqq}{\UseTextSymbol{OT1}\crqq}
+\ProvideTextCommand{\clq}{OT1}
+  {\set@low@box{\textquoteright}\box\z@\kern.04em\allowhyphens}
+\ProvideTextCommand{\clq}{T1}
+  {\quotesinglbase\kern-.0428em\relax}
+\ProvideTextCommandDefault{\clq}{\UseTextSymbol{OT1}\clq}
+\ProvideTextCommand{\crq}{OT1}
+  {\save@sf@q{\nobreak\textquoteleft\kern.17em}}
+\ProvideTextCommand{\crq}{T1}
+  {\save@sf@q{\nobreak\textquoteleft\kern.17em}}
+\ProvideTextCommandDefault{\crq}{\UseTextSymbol{OT1}\crq}
+\ifx\cs@compat@plain\@undefined\else\let\cs@olduv=\relax\fi
+\ifx\cs@olduv\@undefined
+  \DeclareRobustCommand\uv[1]{{\leavevmode\clqq#1\crqq}}
+\else
+  \DeclareRobustCommand\uv{\bgroup\aftergroup\closequotes
+    \leavevmode\clqq\let\cs@next=}
+  \def\closequotes{\unskip\crqq\relax}
+\fi
+\newcount\cs@wordlen
+\begingroup\catcode`\-12
+\def\x{\endgroup
+  \def\cs@hyphen{-}
+  \def\cs@endash{--}
+  \def\cs@emdash{---}
+  \def\cs@boxhyphen{\hbox{-}}
+  \def\cs@splithyphen{\kern\z@
+    \discretionary{-}{\char\hyphenchar\the\font}{-}\nobreak\hskip\z@}
+}\x
+\initiate@active@char{-}
+\declare@shorthand{slovak}{-}{%
+  \ifx\protect\@typeset@protect
+    \ifhmode
+      \ifinner
+        \bbl@afterelse\bbl@afterelse\bbl@afterelse\cs@hyphen
+      \else
+        \bbl@afterfi\bbl@afterelse\bbl@afterelse\cs@firsthyphen
+      \fi
+    \else
+      \bbl@afterfi\bbl@afterelse\cs@hyphen
+    \fi
+  \else
+    \bbl@afterfi\cs@hyphen
+  \fi}
+\begingroup\catcode`\-\active
+\def\x{\endgroup
+  \def\cs@firsthyphen{\futurelet\cs@token\cs@firsthyph@n}
+  \def\cs@firsthyph@n{%
+    \ifx -\cs@token
+      \bbl@afterelse\cs@secondhyphen
+    \else
+      \bbl@afterfi\cs@checkhyphen
+    \fi}
+  \def\cs@secondhyphen ##1{%
+    \futurelet\cs@token\cs@secondhyph@n}
+  \def\cs@secondhyph@n{%
+    \ifx -\cs@token
+      \bbl@afterelse\cs@emdash\@gobble
+    \else
+      \bbl@afterfi\cs@endash
+    \fi}
+}\x
+\def\cs@checkhyphen{%
+  \ifnum\expandafter\hyphenchar\the\font=`\-
+    \def\cs@word{}\cs@wordlen\z@
+    \bbl@afterelse\cs@scanword
+  \else
+    \cs@hyphen
+  \fi}
+\def\cs@scanword{\let\cs@lasttoken= \cs@token\expandafter\cs@gettoken}
+\def\cs@continuescan{\let\cs@lasttoken\@undefined\expandafter\cs@gettoken}
+\def\cs@gettoken{\futurelet\cs@token\cs@gett@ken}
+\def\cs@gett@ken{%
+  \ifx\cs@token\cs@lasttoken \def\cs@next{\cs@examinetoken}%
+  \else \def\cs@next{\cs@scanword}%
+  \fi \cs@next}
+\def\cs@examinetoken{%
+  \ifcat A\cs@token
+    \def\cs@next{\cs@addparam}%
+  \else\ifcat 0\cs@token
+    \def\cs@next{\cs@addparam}%
+  \else\ifx\char\cs@token
+    \def\cs@next{\afterassignment\cs@expandchar\let\cs@token= }%
+  \else\ifx\bgroup\cs@token
+    \def\cs@next{\cs@ignoretoken\bgroup}%
+  \else\ifx\egroup\cs@token
+    \def\cs@next{\cs@ignoretoken\egroup}%
+  \else\ifx\begingroup\cs@token
+    \def\cs@next{\cs@ignoretoken\begingroup}%
+  \else\ifx\endgroup\cs@token
+    \def\cs@next{\cs@ignoretoken\endgroup}%
+  \else
+    \def\cs@next{\expandafter\expandafter\expandafter\cs@checkchardef
+      \expandafter\meaning\expandafter\cs@token\string\char\end}%
+  \fi\fi\fi\fi\fi\fi\fi\cs@next}
+\expandafter\def\expandafter\cs@checkchardef
+  \expandafter#\expandafter1\string\char#2\end{%
+    \def\cs@token{#1}%
+    \ifx\cs@token\@empty
+      \def\cs@next{\afterassignment\cs@examinechar\let\cs@token= }%
+    \else
+      \def\cs@next{\cs@nosplit}%
+    \fi \cs@next}
+\def\cs@ignoretoken#1{%
+  \edef\cs@word{\cs@word#1}%
+  \afterassignment\cs@continuescan\let\cs@token= }
+\def\cs@addparam#1{%
+  \edef\cs@word{\cs@word#1}%
+  \cs@checkcode{\lccode`#1}}
+\def\cs@expandchar{\afterassignment\cs@examinechar\chardef\cs@token=}
+\def\cs@examinechar{%
+  \edef\cs@word{\cs@word\char\the\cs@token\space}%
+  \cs@checkcode{\lccode\cs@token}}
+\def\cs@checkcode#1{%
+  \ifnum0=#1
+    \def\cs@next{\cs@nosplit}%
+  \else
+    \advance\cs@wordlen\@ne
+    \ifnum\righthyphenmin>\the\cs@wordlen
+      \def\cs@next{\cs@continuescan}%
+    \else
+      \cs@splithyphen
+      \def\cs@next{\cs@word}%
+    \fi
+  \fi \cs@next}
+\def\cs@nosplit{\cs@boxhyphen\cs@word}
+\let\minus\cs@hyphen
+
+\def\standardhyphens{\cs@splithyphensfalse\cs@deactivatehyphens}
+\def\splithyphens{\cs@splithyphenstrue\cs@activatehyphens}
+\def\cs@splitattr{\babel@save\ifcs@splithyphens\splithyphens}
+\bbl@declare@ttribute{slovak}{split}{%
+  \addto\extrasslovak{\cs@splitattr}}
+\let\cs@activatehyphens\relax
+\let\cs@deactivatehyphens\relax
+\expandafter\addto\csname extras\CurrentOption\endcsname{%
+  \def\cs@activatehyphens{\bbl@activate{-}}%
+  \def\cs@deactivatehyphens{\bbl@deactivate{-}}%
+  \ifcs@splithyphens\cs@activatehyphens\fi}
+\expandafter\addto\csname noextras\CurrentOption\endcsname{%
+  \cs@deactivatehyphens
+  \let\cs@activatehyphens\relax
+  \let\cs@deactivatehyphens\relax}
+\let\cs@looseness\looseness
+\def\looseness{%
+  \ifcs@splithyphens
+    \cs@deactivatehyphens\afterassignment\cs@activatehyphens \fi
+  \cs@looseness}
+\ifx\cs@nocaptions\@undefined\else
+  \edef\cs@main@language{\CurrentOption}
+  \ifx\cs@origselect\@undefined
+    \let\cs@origselect=\selectlanguage
+    \def\selectlanguage{%
+      \let\selectlanguage\cs@origselect
+      \ifx\bbl@main@language\cs@main@language
+        \expandafter\cs@selectlanguage
+      \else
+        \expandafter\selectlanguage
+      \fi}
+    \def\cs@selectlanguage{%
+      \cs@tempdisable{captions}%
+      \cs@tempdisable{date}%
+      \selectlanguage}
+    \def\cs@tempdisable#1{%
+      \def\@tempa{cs@#1}%
+      \def\@tempb{#1\bbl@main@language}%
+      \expandafter\expandafter\expandafter\let
+        \expandafter \csname\expandafter \@tempa \expandafter\endcsname
+        \csname \@tempb \endcsname
+      \expandafter\edef\csname \@tempb \endcsname{%
+        \let \expandafter\noexpand \csname \@tempb \endcsname
+          \expandafter\noexpand \csname \@tempa \endcsname
+        \let \expandafter\noexpand\csname \@tempa \endcsname
+          \noexpand\@undefined}}
+    \@onlypreamble\cs@main@language
+    \@onlypreamble\cs@origselect
+    \@onlypreamble\cs@selectlanguage
+    \@onlypreamble\cs@tempdisable
+  \fi
+\fi
+\ifx\cs@compat@plain\@undefined
+\ifx\cs@check@enc\@undefined\else
+  \def\cs@check@enc{
+    \ifx\encodingdefault\cs@iltw@
+      \let\cs@warn\@font@warning \let\@font@warning\@gobble
+      \let\cs@info\@font@info    \let\@font@info\@gobble
+      \SetSymbolFont{operators}{normal}{\cs@iltw@}{cmr}{m}{n}
+      \SetSymbolFont{operators}{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathbf{normal}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathit{normal}{\cs@iltw@}{cmr}{m}{it}
+      \SetMathAlphabet\mathrm{normal}{\cs@iltw@}{cmr}{m}{n}
+      \SetMathAlphabet\mathsf{normal}{\cs@iltw@}{cmss}{m}{n}
+      \SetMathAlphabet\mathtt{normal}{\cs@iltw@}{cmtt}{m}{n}
+      \SetMathAlphabet\mathbf{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathit{bold}{\cs@iltw@}{cmr}{bx}{it}
+      \SetMathAlphabet\mathrm{bold}{\cs@iltw@}{cmr}{bx}{n}
+      \SetMathAlphabet\mathsf{bold}{\cs@iltw@}{cmss}{bx}{n}
+      \SetMathAlphabet\mathtt{bold}{\cs@iltw@}{cmtt}{m}{n}
+      \let\@font@warning\cs@warn \let\cs@warn\@undefined
+      \let\@font@info\cs@info    \let\cs@info\@undefined
+    \fi
+    \let\cs@check@enc\@undefined}
+  \AtBeginDocument{\cs@check@enc}
+\fi
+\fi
+\def\cs@undoiltw@{%
+  \uccode158=208 \lccode158=158 \sfcode158=1000
+  \sfcode159=1000
+  \uccode165=133 \lccode165=165 \sfcode165=1000
+  \uccode169=137 \lccode169=169 \sfcode169=1000
+  \uccode171=139 \lccode171=171 \sfcode171=1000
+  \uccode174=142 \lccode174=174 \sfcode174=1000
+  \uccode181=149
+  \uccode185=153
+  \uccode187=155
+  \uccode190=0   \lccode190=0
+  \uccode254=222 \lccode254=254 \sfcode254=1000
+  \uccode255=223 \lccode255=255 \sfcode255=1000}
+\ifx\cs@enc@update\@undefined
+\ifx\@@enc@update\@undefined\else
+  \let\cs@enc@update\@@enc@update
+  \def\@@enc@update{\ifx\cf@encoding\cs@iltw@\cs@undoiltw@\fi
+    \cs@enc@update
+    \expandafter\ifnum\csname l@\languagename\endcsname=\the\language
+      \expandafter\ifx
+      \csname l@\languagename:\f@encoding\endcsname\relax
+      \else
+        \expandafter\expandafter\expandafter\let
+          \expandafter\csname
+          \expandafter l\expandafter @\expandafter\languagename
+          \expandafter\endcsname\csname l@\languagename:\f@encoding\endcsname
+      \fi
+      \language=\csname l@\languagename\endcsname\relax
+    \fi}
+\fi\fi
+\ldf@finish\CurrentOption
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+\endinput
+%%
+%% End of file `slovak.ldf'.