pixelart (7dec17)

git-svn-id: svn://tug.org/texlive/trunk@45998 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 1299 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/pixelart/CHANGELOG.md b/Master/texmf-dist/doc/latex/pixelart/CHANGELOG.md
new file mode 100644
index 00000000000..4bdc375c80c
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pixelart/CHANGELOG.md
@@ -0,0 +1,5 @@
+* pixelart 0.1.0 (2017-12-05)
+
+    * First published version.
+
+    -- Louis Paternault <spalax+ctan@gresille.org>
diff --git a/Master/texmf-dist/doc/latex/pixelart/LICENSE.txt b/Master/texmf-dist/doc/latex/pixelart/LICENSE.txt
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pixelart/LICENSE.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/pixelart/README.md b/Master/texmf-dist/doc/latex/pixelart/README.md
new file mode 100644
index 00000000000..dd7dd21e233
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pixelart/README.md
@@ -0,0 +1,44 @@
+pixelart 🎨 A LaTeX package to draw pixel-art pictures
+======================================================
+
+[![Sources](https://img.shields.io/badge/sources-pixelart-brightgreen.svg)](http://framagit.org/spalax/pixelart)
+[![CTAN](https://img.shields.io/ctan/v/pixelart.svg)](http://ctan.org/pkg/pixelart)
+[![Documentation](https://img.shields.io/badge/doc-pdf-brightgreen.svg)](http://mirrors.ctan.org/macros/latex/contrib/pixelart/pixelart.pdf)
+
+ 
+
+![Example](https://framagit.org/spalax/pixelart/raw/master/logo.png)
+
+It defines commands to convert a stream of bits (as characters `0` and `1`) to a
+black-and-white picture.
+
+- [Usage and installation instruction](http://mirrors.ctan.org/macros/latex/contrib/pixelart/pixelart.pdf).
+- Example: The picture above was produced using the following code.
+
+```latex
+\bwpixelart{
+    111111110011001110000011111111
+    110110110011000110000011000011
+    100110010000000110000010000110
+    000110000111000110011000001100
+    000110000011000110110000011000
+    000110000011000111100000110000
+    000110000011000111100001100000
+    000110000011000110110011000001
+    000110000011000110011011000011
+    001111000111100110011011111111
+}
+```
+
+License
+-------
+
+*Copyright 2017 Louis Paternault*
+
+This work may be distributed and/or modified under the conditions of the LaTeX
+Project Public License, either version 1.3 of this license or (at your option)
+any later version.
+
+The latest version of this license is in http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX version
+2005/12/01 or later.
diff --git a/Master/texmf-dist/doc/latex/pixelart/pixelart.pdf b/Master/texmf-dist/doc/latex/pixelart/pixelart.pdf
new file mode 100644
index 00000000000..c8ebc2d9b60
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pixelart/pixelart.pdf
diff --git a/Master/texmf-dist/source/latex/pixelart/pixelart.dtx b/Master/texmf-dist/source/latex/pixelart/pixelart.dtx
new file mode 100644
index 00000000000..eb229402485
--- /dev/null
+++ b/Master/texmf-dist/source/latex/pixelart/pixelart.dtx
@@ -0,0 +1,665 @@
+% \iffalse meta-comment
+% Copyright 2017 Louis Paternault
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+% 
+% The Current Maintainer of this work is Louis Paternault
+%
+% This work consists of the files pixelart.dtx and pixelart.ins
+% and the derived file pixelart.sty.
+% \fi
+% 
+% \iffalse
+%<*driver>
+\ProvidesFile{pixelart.dtx}
+%</driver>
+%
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{pixelart}
+%<*package>
+    [2017/12/05 v0.1.0 A package to draw pixel-art pictures] % TODO Date
+%</package>
+%
+%<*driver>
+\documentclass{ltxdoc}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\usepackage{hyperref}
+\usepackage{pixelart}
+\usepackage{listings}
+\usepackage{numprint}
+\lstset{
+  language=[LaTeX]TeX,
+  numbers=left,
+  numberstyle=\tiny,
+  backgroundcolor=\color{yellow!20},
+  basicstyle=\small\color{black}\ttfamily,
+  keywordstyle=\color{blue!80}\sffamily,
+  commentstyle=\color{olive},
+  stringstyle=\color{red},
+}
+\usepackage{textcomp}
+\usepackage{fontspec}
+\usepackage[english]{babel}
+% Smiley command published by percusse on https://tex.stackexchange.com/a/58913
+\newcommand{\smiley}{\tikz[baseline=-0.75ex, black]{
+  \draw circle (2mm);
+  \node[fill,circle,inner sep=0.5pt] (left eye) at (135:0.8mm) {};
+  \node[fill,circle,inner sep=0.5pt] (right eye) at (45:0.8mm) {};
+  \draw (-145:0.9mm) arc (-120:-60:1.5mm);
+}
+}
+\begin{document}
+\DocInput{pixelart.dtx}
+\end{document}
+%</driver>
+% \fi
+% 
+% \CheckSum{0}
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+% \GetFileInfo{pixelart.dtx}
+%
+% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ ,\!,\(,\),\,}
+% \DoNotIndex{\@bwpa@newline}
+% \DoNotIndex{\begin}
+% \DoNotIndex{\coordinate}
+% \DoNotIndex{\end}
+% \DoNotIndex{\fill}
+% \DoNotIndex{\makeatletter, \makeatother}
+% \DoNotIndex{\newcommand}
+% \DoNotIndex{\pgfkeys, \pgfkeyssetvalue, \pgfkeysvalueof, \pgfparserdef, \pgfparserparse, \pgfparserswitch}
+% \DoNotIndex{\raisebox, \RequirePackage}
+% \DoNotIndex{\space}
+% \DoNotIndex{\tikz}
+% \DoNotIndex{\usepgfmodule, \usetikzlibrary}
+%
+% \title{
+%  \begin{tikzpicture}
+%    \tikzbwpixelart[scale=.037]{(-1.05, .14)}{%
+%      1111110001100000000000000000001110000010000000000000001000
+%      0110011001100000000000000000000110000111000000000000011000
+%      0110011000000000000000000000000110001101100000000000011000
+%      0110011011100110000110011111000110011000110110111001111110
+%      0111110001100011001100110001100110011000110011101100011000
+%      0110000001100001111000111111100110011111110011001100011000
+%      0110000001100000110000110000000110011000110011000000011000
+%      0110000001100001111000110000000110011000110011000000011000
+%      0110000001100011001100110001100110011000110011000000011011
+%      1111000011110110000110011111001111011000110111100000001110
+%    }%
+%    \draw (0, 0) node[opacity=0]{\LARGE PixelArt};
+%  \end{tikzpicture}\thanks{
+%   This document corresponds to \textsf{pixelart}~\fileversion, dated \filedate.
+%   Home page, bug requests, etc. at \url{http://framagit.org/spalax/pixelart}
+%   }\\A package to draw pixel-art pictures.}
+% \author{Louis Paternault\\ \texttt{spalax+ctan(at)gresille(dot)org}}
+%
+% \maketitle
+%
+% \begin{abstract}
+% This package defines macros to draw pixel-art pictures using \LaTeX{}.
+% \end{abstract}
+%
+% \setcounter{tocdepth}{2}
+% \tableofcontents
+%
+% \section{Introduction}
+% This document introduces the \textsf{pixelart} package, used to draw pixel-art pictures.
+%
+% \subsection{License}
+% This work may be distributed and/or modified under the
+% conditions of the \LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+%
+% Further information can be found in the |.dtx| file used to build this
+% document.
+%
+% \subsection{Overview}
+% Installation instruction are given in section \ref{sec:install}.
+% Documentation about how to use this package (and examples) is given in section
+% \ref{sec:usage}. Section \ref{sec:bugs} lists some known bugs and
+% limitations, and implementation is given in section
+% \ref{sec:implementation}.
+%
+% \section{Download and Install}
+% \label{sec:install}
+%
+% \subsection{Manual installation}
+%
+% \begin{itemize}
+% \item Download the lastest archive :
+% \begin{description}
+% \item[Stable version] \url{http://mirrors.ctan.org/install/macros/latex/contrib/pixelart.tds.zip}
+% \item[Development version] \url{https://framagit.org/spalax/pixelart/repository/archive.zip?ref=master}
+% \end{description}
+% \item Unzip the archive.
+% \item If you got the archive from CTAN (stable version), move file \texttt{tex/latex/pixelart/pixelart.sty} in a \LaTeX{} path.
+% \item If you got the development version, |cd| to the main archive directory, and run |latex pixelart.ins| to build |pixelart.sty|. Move this file into a \LaTeX{} path.
+% \end{itemize}
+%
+% \section{Usage}
+% \label{sec:usage}
+%
+% \subsection{Package options}
+%
+% This package has no package options.
+%
+% \subsection{Macros}
+%
+% This package defines two macros : |\bwpixelart|, used to insert a pixel-art picture, and |\tikzbwpixelart|, which has the same purpose, excepted that it is called from within a |tikzpicture| environment.
+%
+% \subsubsection{\textbackslash\texttt{bwpixelart}}
+% \DescribeMacro{\bwpixelart}
+% To insert a pixel-art picture in your text, use :
+% \begin{center}
+%    \lstinline|\bwpixelart|\oarg{color, raise, scale}\marg{pixels}
+% \end{center}
+% Its optional arguments are:
+% \begin{description}
+% \item[color=black] Foreground color (the background is transparent);
+% \item[scale=1] Scale. By default, a pixel is the size of a |tikzpicture| default unit, which is probably bigger than what you want.
+% \item[raise=0pt] Raise the picture. By default, the bottom of the picture is on the baseline. You might want to lower it a little by giving this option a negative argument.
+% \end{description}
+%
+% Its mandatory argument is the picture pixels, as |0|'s and |1|'s. Line breaks in this argument are interpreted as line breaks in the pixel art pictures. How spaces are interpreted is undefined (see section \ref{ssec:spaces} for more information).
+%
+% For instance, this heart
+% \bwpixelart[color=red, scale=.05, raise=-1ex]{%
+% 001101100
+% 011111110
+% 111111111
+% 111111111
+% 111111111
+% 011111110
+% 001111100
+% 000111000
+% 000010000
+% }
+% was drawn using the following code:
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+ \bwpixelart[color=red, scale=.05, raise=-1ex]{%
+ 001101100
+ 011111110
+ 111111111
+ 111111111
+ 111111111
+ 011111110
+ 001111100
+ 000111000
+ 000010000
+ }
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% \subsubsection{\textbackslash\texttt{tikzbwpixelart}}
+% \DescribeMacro{\tikzbwpixelart}
+% The second macro, |\tikzbwpixelart| is almost identical to the first one, excepted that it is meant to be called from inside a |tikzpicture| environment. Actually, \lstinline|\bwpixelart{0101}| is more or less equivalent to calling :
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\begin{tikzpicture}
+  \tikzbwpixelart{0101}
+\end{tikzpicture}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+
+% The signature of this macro is :
+% \begin{center}
+%   \lstinline|\tikzbwpixelart|\oarg{color, scale}\marg{coordinates}\marg{pixels}
+% \end{center}
+% Its optional arguments are |color| and |scale|, used to set the color and scale of the picture.
+%
+% Its first mandatory argument is the coordinate of the top left corner of the picture; the second one is the list of pixel (using the same syntax as teh |\bwpixelart| macro.
+%
+% For instance, this heart
+%\begin{tikzpicture}[scale=.05, baseline=-1em]
+%  \fill[red] (5, -5) circle (6.5);
+%  \tikzbwpixelart{(0, 0)}{%
+%  0011001100
+%  0111111110
+%  1111111111
+%  1111111111
+%  1111111111
+%  0111111110
+%  0011111100
+%  0001111000
+%  0000110000
+%}
+%\end{tikzpicture}
+% was drawn using the following code:
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\begin{tikzpicture}[scale=.05, baseline=-1em]
+  \fill[red] (5, -5) circle (6.5);
+  \tikzbwpixelart{(0, 0)}{%
+  0011001100
+  0111111110
+  1111111111
+  1111111111
+  1111111111
+  0111111110
+  0011111100
+  0001111000
+  0000110000
+}
+\end{tikzpicture}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+%\section{Bugs, Ideas, Undefined behaviours}
+%\label{sec:bugs}
+%
+% I have great ideas about what this package could do, but:
+% \begin{itemize}
+% \item I do not need them;
+% \item I am not sure there is a huge \emph{need} for some pixel-art package;
+% \item I have a full-time job, my wife has a far-more-than-full-time job, my daugther \emph{is} a full-time job, so I have very little time to hack…
+% \end{itemize}
+%
+% So, I am listing here some known bugs, undefined behaviours, limitations. You, random passer-by, will be greatly welcome if you were to fix or implement stuff listed in this section. \smiley
+%
+% \subsection{Missing \texttt{\textbackslash{}pixelart} macro}
+%
+% There is no |\pixelart| macro. This is on purpose: given that this package is more or less a working draft, I did not want to register a badly designed |\pixelart| macro. This means that some folk wanting to improve this package can extand the |\bwpixelart| macro and use the name |\pixelart| to fix my design mistakes.
+%
+% \subsection{It's insanely slooooow.}
+%
+% That's it. It takes alomst 30 seconds to compile a document containing only a $128\times128$ picture (about \numprint{16000} pixels). I have no idea how to fix it. Good luck.
+%
+% \subsection{Package option \texttt{draft}}
+%
+% To (partially) fix the previous bug (slooooow), one could imaging adding a package option |draft|. With this option set, the pixel-art pictures would not be compiled, but would be replaced either by a dummy picture of an arbitrary size, or a dummy picture of the actual size of the picture, if an argument |size=(4, 5)| has been provided to the macro.
+%
+% This should not be that hard to implement. Patches welcome! \smiley{}
+%
+% \subsection{Black and white}
+%
+% Right now, it is black and white only (or, to be more accurate, any single color on a transparent background).
+%
+% One \emph{could} produce colored pixel-art pictures, but… it's complicated. For instance, this heart (borrowed from the Django project\footnote{\url{https://www.djangoproject.com/}}):
+%
+% \definecolor{violet1}{RGB}{247, 176, 207}
+% \definecolor{violet2}{RGB}{238, 33, 120}
+% \definecolor{violet3}{RGB}{214, 45, 117}
+% \definecolor{violet4}{RGB}{217, 25, 92}
+% \definecolor{violet5}{RGB}{173, 29, 69}
+% \begin{center}
+%   \begin{tikzpicture}[scale=.1]
+%     \tikzbwpixelart[color=violet1]{(0, 0)}{%
+%     0000000
+%     0000010
+%     }
+%     \tikzbwpixelart[color=violet2]{(0, 0)}{%
+%     0000000
+%     0110100
+%     0000000
+%     0010100
+%     0000000
+%     0001000
+%     }
+%     \tikzbwpixelart[color=violet3]{(0, 0)}{%
+%     0000010
+%     0000000
+%     1000010
+%     0000000
+%     0001000
+%     }
+%     \tikzbwpixelart[color=violet4]{(0, 0)}{%
+%     0010100
+%     1001000
+%     0110100
+%     0001010
+%     0010100
+%     }
+%     \tikzbwpixelart[color=violet5]{(0, 0)}{%
+%     0100000
+%     0000001
+%     0001001
+%     0100000
+%     }
+%   \end{tikzpicture}
+% \end{center}
+%
+% could be produced using the following code. Basically (given that colors |violet1| to |violet5| have been correctly defined), we stack up several single-color pixel-art pictures.
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\begin{tikzpicture}[scale=.1]
+  \tikzbwpixelart[color=violet1]{(0, 0)}{%
+  0000000
+  0000010
+  }
+  \tikzbwpixelart[color=violet2]{(0, 0)}{%
+  0000000
+  0110100
+  0000000
+  0010100
+  0000000
+  0001000
+  }
+  \tikzbwpixelart[color=violet3]{(0, 0)}{%
+  0000010
+  0000000
+  1000010
+  0000000
+  0001000
+  }
+  \tikzbwpixelart[color=violet4]{(0, 0)}{%
+  0010100
+  1001000
+  0110100
+  0001010
+  0010100
+  }
+  \tikzbwpixelart[color=violet5]{(0, 0)}{%
+  0100000
+  0000001
+  0001001
+  0100000
+  }
+\end{tikzpicture}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% One could imagine a simpler syntax: we assign several colors to characters, and we use |1|, |2|, |3|, etc. as the pixels to define the picture. This would give the following code.
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\begin{tikzpicture}[scale=.1]
+  \tikzpixelart[colors={
+    1=violet1,
+    2=violet2,
+    3=violet3,
+    4=violet4,
+    5=violet5,
+  }]{(0, 0)}{%
+  0540430
+  4224215
+  3445435
+  0524240
+  0043400
+  0002000
+  }
+\end{tikzpicture}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% Once again, patches are welcome! \smiley{}
+%
+% \subsection{Spaces}
+%\label{ssec:spaces}
+%
+% Spaces are interpreted as line breaks. For instance, this heart
+% \bwpixelart[scale=.03, raise=-1pt]{%
+%   0011001100 0111111110 1111111111
+%   1111111111 1111111111 0111111110
+%   0011111100 0001111000 0000110000
+% }
+% could be written as :
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\bwpixelart[scale=.03, raise=-1pt]{%
+  0011001100 0111111110 1111111111
+  1111111111 1111111111 0111111110
+  0011111100 0001111000 0000110000
+}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% This will work (right now), but is an undefined behaviour, and might change in a later version without prior notice.
+%
+% \subsection{Leading space}
+%
+% As described in the previous section, spaces are considered as line breaks. A problem is that the \emph{first} space(s) is considered as a line breaks as well. Thus, the first space should be commented out (using \%), to avoid the case described in the following picture, where the cross marks the location of the upper left corner of the picture, as intended (but not as produced).
+%
+% \begin{center}
+%\begin{tikzpicture}[scale=.2]
+%  \tikzbwpixelart{(0, 0)}{
+%    10
+%    01
+%  }
+%  \draw (0, 0) node{$\times$} node[above left]{$(0, 0)$};
+%\end{tikzpicture}
+% \end{center}
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\begin{tikzpicture}[scale=.2]
+  \tikzbwpixelart{(0, 0)}{
+    10
+    01
+  }
+  \draw (0, 0) node{$\times$} node[above left]{$(0, 0)$};
+\end{tikzpicture}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% To circumvent this bug, line 2 should have been written as (note the trailing percent character):
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}[firstnumber=2]
+  \tikzbwpixelart{(0, 0)}{%
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% \subsection{Uneven lines}
+%
+% Right now, lines do not \emph{have} to have the same number of characters. For instance, the following heart
+%  \bwpixelart[scale=.03, raise=-1pt]{%
+%  00110011
+%  011111111
+%  1111111111
+%  1111111111
+%  1111111111
+%  011111111
+%  00111111
+%  0001111
+%  000011
+%}
+% could be written as :
+%
+% \iffalse
+%<*example>
+% \fi
+% \begin{lstlisting}
+\bwpixelart[scale=.03, raise=-1pt]{%
+  00110011
+  011111111
+  1111111111
+  1111111111
+  1111111111
+  011111111
+  00111111
+  0001111
+  000011
+}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% This is an undefined behaviour and might raise an error in the future.
+%
+% \section{Implementation}
+% \label{sec:implementation}
+%
+% Load some packages.
+%    \begin{macrocode}
+\RequirePackage{pgf}
+\usepgfmodule{parser}
+\RequirePackage{tikz}
+\usetikzlibrary{calc}
+\RequirePackage{pgfkeys}
+\RequirePackage{etoolbox}
+
+%    \end{macrocode}
+%
+% Let the nasty stuff begin.
+%
+%    \begin{macrocode}
+\makeatletter
+
+%    \end{macrocode}
+%
+% Define macro arguments
+%
+%    \begin{macrocode}
+\pgfkeys{
+  /PIXELART/BWPIXELART/.is family,
+  /PIXELART/BWPIXELART,
+  scale/.value required,
+  scale/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/scale}{#1}},
+  scale=1,
+  raise/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/raise}{#1}},
+  raise/.value required,
+  raise=0pt,
+  color/.value required,
+  color/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/color}{#1}},
+  color=black,
+}
+
+\pgfkeys{
+  /PIXELART/TIKZBWPIXELART/.is family,
+  /PIXELART/TIKZBWPIXELART,
+  scale/.value required,
+  scale/.code={\pgfkeyssetvalue{/PIXELART/TIKZBWPIXELART/scale}{#1}},
+  scale=1,
+  color/.value required,
+  color/.code={\pgfkeyssetvalue{/PIXELART/TIKZBWPIXELART/color}{#1}},
+  color=black,
+}
+
+%    \end{macrocode}
+%
+% Define argument parser, parsing the sequence of 0 and 1 defining the pixel art.
+%
+%    \begin{macrocode}
+\pgfparserdef{@bwpixelart}{initial}{blank space \space}{
+  \@bwpa@newline
+}
+\pgfparserdef{@bwpixelart}{initial}{the character 0}{
+  \coordinate (@pixelart) at ($(@pixelart) + (1, 0)$);
+}
+\pgfparserdef{@bwpixelart}{initial}{the character 1}{
+  \fill (@pixelart) rectangle ++(1, 1);
+  \coordinate (@pixelart) at ($(@pixelart) + (1, 0)$);
+}
+\pgfparserdef{@bwpixelart}{initial}{the letter @}{
+  \pgfparserswitch{final}
+}
+
+\newcommand{\@bwpa@newline}{
+  \coordinate (@pixelart) at ($(@pixelart@startline) + (0, -1)$);
+  \coordinate (@pixelart@startline) at (@pixelart);
+}
+
+%    \end{macrocode}
+%
+% \begin{macro}{\bwpixelart}
+% Define |\bwpixelart|, used to draw black-and-white pixelart.
+%    \begin{macrocode}
+\newcommand{\bwpixelart}[2][]{{%
+  \pgfkeys{/PIXELART/BWPIXELART, #1}%
+  \raisebox{\pgfkeysvalueof{/PIXELART/BWPIXELART/raise}}{%
+    \tikz[
+      scale=\pgfkeysvalueof{/PIXELART/BWPIXELART/scale},
+    ]{
+      \tikzbwpixelart[%
+        color=\pgfkeysvalueof{/PIXELART/BWPIXELART/color},
+        ]{(0, 0)}{#2}
+    }%
+  }%
+}}
+
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{\tikzbwpixelart}
+% Define |\tikzbwpixelart|, used to draw black-and-white pixelart from inside a |tikzpicture| environment.
+%    \begin{macrocode}
+\newcommand{\tikzbwpixelart}[3][]{
+  \pgfkeys{/PIXELART/TIKZBWPIXELART, #1}
+  \begin{scope}[shift={#2}]
+    \begin{scope}[#1]
+      \coordinate (@pixelart) at (0, 0);
+      \coordinate (@pixelart@startline) at (@pixelart);
+
+      \pgfparserparse{@bwpixelart} #3 @
+    \end{scope}
+  \end{scope}
+}
+
+%    \end{macrocode}
+% That's all, folks!
+%    \begin{macrocode}
+\makeatother
+
+%    \end{macrocode}
+% \end{macro}
+%
+% \addcontentsline{toc}{section}{Change History}
+% \PrintChanges
+%
+% \StopEventually{%
+% \addcontentsline{toc}{section}{Index}
+% \PrintIndex
+% }
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/pixelart/pixelart.ins b/Master/texmf-dist/source/latex/pixelart/pixelart.ins
new file mode 100644
index 00000000000..add23f88ee2
--- /dev/null
+++ b/Master/texmf-dist/source/latex/pixelart/pixelart.ins
@@ -0,0 +1,59 @@
+%% Copyright 2017 Louis Paternault
+%%
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%%
+%% This work has the LPPL maintenance status `maintained'.
+%% 
+%% The Current Maintainer of this work is Louis Paternault
+%%
+%% This work consists of the files pixelart.dtx and pixelart.ins
+%% and the derived file pixelart.sty.
+
+\input{docstrip}
+
+\keepsilent
+\usedir{tex/latex/pixelart}
+
+\preamble
+Copyright 2017 Louis Paternault
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2005/12/01 or later.
+
+This work has the LPPL maintenance status `maintained'.
+
+The Current Maintainer of this work is Louis Paternault
+
+This work consists of the files pixelart.dtx and pixelart.ins
+and the derived file pixelart.sty.
+\endpreamble
+
+\generate{\file{pixelart.sty}{\from{pixelart.dtx}{package}}}
+
+\obeyspaces
+\Msg{****************************************************}
+\Msg{*                                                  *}
+\Msg{* To finish the installation you have to move the  *}
+\Msg{* following file into a directory searched by TeX: *}
+\Msg{*                                                  *}
+\Msg{* pixelart.sty                                     *}
+\Msg{*                                                  *}
+\Msg{* To produce the documentation run the file        *}
+\Msg{* pixelart.dtx through LaTeX.                      *}
+\Msg{*                                                  *}
+\Msg{* Happy TeXing!                                    *}
+\Msg{*                                                  *}
+\Msg{****************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/pixelart/pixelart.sty b/Master/texmf-dist/tex/latex/pixelart/pixelart.sty
new file mode 100644
index 00000000000..4045c6e672b
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/pixelart/pixelart.sty
@@ -0,0 +1,110 @@
+%%
+%% This is file `pixelart.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% pixelart.dtx  (with options: `package')
+%% Copyright 2017 Louis Paternault
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status `maintained'.
+%% 
+%% The Current Maintainer of this work is Louis Paternault
+%% 
+%% This work consists of the files pixelart.dtx and pixelart.ins
+%% and the derived file pixelart.sty.
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{pixelart}
+    [2017/12/05 v0.1.0 A package to draw pixel-art pictures] % TODO Date
+
+\RequirePackage{pgf}
+\usepgfmodule{parser}
+\RequirePackage{tikz}
+\usetikzlibrary{calc}
+\RequirePackage{pgfkeys}
+\RequirePackage{etoolbox}
+
+\makeatletter
+
+\pgfkeys{
+  /PIXELART/BWPIXELART/.is family,
+  /PIXELART/BWPIXELART,
+  scale/.value required,
+  scale/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/scale}{#1}},
+  scale=1,
+  raise/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/raise}{#1}},
+  raise/.value required,
+  raise=0pt,
+  color/.value required,
+  color/.code={\pgfkeyssetvalue{/PIXELART/BWPIXELART/color}{#1}},
+  color=black,
+}
+
+\pgfkeys{
+  /PIXELART/TIKZBWPIXELART/.is family,
+  /PIXELART/TIKZBWPIXELART,
+  scale/.value required,
+  scale/.code={\pgfkeyssetvalue{/PIXELART/TIKZBWPIXELART/scale}{#1}},
+  scale=1,
+  color/.value required,
+  color/.code={\pgfkeyssetvalue{/PIXELART/TIKZBWPIXELART/color}{#1}},
+  color=black,
+}
+
+\pgfparserdef{@bwpixelart}{initial}{blank space \space}{
+  \@bwpa@newline
+}
+\pgfparserdef{@bwpixelart}{initial}{the character 0}{
+  \coordinate (@pixelart) at ($(@pixelart) + (1, 0)$);
+}
+\pgfparserdef{@bwpixelart}{initial}{the character 1}{
+  \fill (@pixelart) rectangle ++(1, 1);
+  \coordinate (@pixelart) at ($(@pixelart) + (1, 0)$);
+}
+\pgfparserdef{@bwpixelart}{initial}{the letter @}{
+  \pgfparserswitch{final}
+}
+
+\newcommand{\@bwpa@newline}{
+  \coordinate (@pixelart) at ($(@pixelart@startline) + (0, -1)$);
+  \coordinate (@pixelart@startline) at (@pixelart);
+}
+
+\newcommand{\bwpixelart}[2][]{{%
+  \pgfkeys{/PIXELART/BWPIXELART, #1}%
+  \raisebox{\pgfkeysvalueof{/PIXELART/BWPIXELART/raise}}{%
+    \tikz[
+      scale=\pgfkeysvalueof{/PIXELART/BWPIXELART/scale},
+    ]{
+      \tikzbwpixelart[%
+        color=\pgfkeysvalueof{/PIXELART/BWPIXELART/color},
+        ]{(0, 0)}{#2}
+    }%
+  }%
+}}
+
+\newcommand{\tikzbwpixelart}[3][]{
+  \pgfkeys{/PIXELART/TIKZBWPIXELART, #1}
+  \begin{scope}[shift={#2}]
+    \begin{scope}[#1]
+      \coordinate (@pixelart) at (0, 0);
+      \coordinate (@pixelart@startline) at (@pixelart);
+
+      \pgfparserparse{@bwpixelart} #3 @
+    \end{scope}
+  \end{scope}
+}
+
+\makeatother
+
+\endinput
+%%
+%% End of file `pixelart.sty'.