curve2e (18jan20)

git-svn-id: svn://tug.org/texlive/trunk@53447 c570f23f-e606-0410-a88d-b1316a301751

8 files changed, 1746 insertions, 1241 deletions

diff --git a/Master/texmf-dist/doc/latex/curve2e/README.txt b/Master/texmf-dist/doc/latex/curve2e/README.txt
index 1d74851d13a..c64f768789e 100644
--- a/Master/texmf-dist/doc/latex/curve2e/README.txt
+++ b/Master/texmf-dist/doc/latex/curve2e/README.txt
@@ -10,28 +10,28 @@
 %%   License information appended
 %% 
 File README.txt for package curve2e
-        [2020-01-05 v.2.0.8 Extension package for pict2e]
-
-
-
+        [2020-01-18 v.2.2.0 Extension package for pict2e]
 The package bundle curve2e is composed of the following files
 
 curve2e.dtx
 curve2e.pdf
 README.txt
-ltxdoc.cfg
+curve2e-manual.tex
+curve2e-manual.pdf
 
 curve2e.dtx is the documented TeX source file of file curve2e.sty; you
 get curve2e.sty, curve2e.pdf, and curve2e-v161.sty by running pdflatex
-on curve2e.dtx. The ltxdoc.cfg file customises the way the documentation
-file is typeset. This specific .cfg file is part of the ltxdoc package
-functionality and it is supposed to be configured for each specific
-other bundle.
+on curve2e.dtx. The curve2e-manual files contain the user manual; in
+this way the long preliminary descriptive part has been transferred to
+a shorter dedicated file, and the ^^e2^^80^^9cnormal^^e2^^80^^9d user should have enough
+information to use the package. Th curve2e.pdf file, extracted from
+the .dtx one, contains the code documentation and is intended for the developers, or for the curious advanced users.
 
 README.txt, this file, contains general information.
 
-Curve2e-v161.sty contains a previous version of the package; see below
-why the older version might become necessary for the end user.
+This bundle contains also package curve2e-v161.sty that is a previous
+version of this package; see below why the older version might become
+necessary to the end user.
 
 Curve2e.sty is an extension of the package pict2e.sty which extends the
 standard picture LaTeX environment according to what Leslie Lamport
@@ -41,22 +41,25 @@ This further extension curve2e.sty allows to draw lines and vectors
 with any non integer slope parameters, to draw dashed lines of any
 slope, to draw arcs and curved vectors, to draw curves where just
 the interpolating nodes are specified together with the slopes at
-the nodes; closed paths of any shape can be filled with color; all
+such nodes; closed paths of any shape can be filled with color; all
 coordinates are treated as ordered pairs, i.e. 'complex numbers';
-coordinates may be expressed also in polar form. Coordinates may be specified with macros, so that editing any drawing is rendered much simpler: any point specified with a macro is modified only once in the macro definition.
+coordinates may be expressed also in polar form. Coordinates may be
+specified with macros, so that editing any drawing is rendered much
+simpler: any point specified with a macro is modified only once in
+its macro definition.
 Some of these features have been incorporated in the 2011 version of
 pict2e; therefore this package avoids any modification to the original
 pict2e commands.
 
 Curve2e now accepts polar coordinates in addition to the usual cartesian
-ones; several macros have been upgraded and a new macro for tracing cubic
+ones; several macros have been upgraded; a new macro for tracing cubic
 Bezier splines with their control nodes specified in polar form is
 available. The same applies to quadratic Bezier splines. The multiput
-command has been completely modified in a backwards compatible way, as
-to manipulate the increment components in a configurable way. A new
-xmultiput command has been defined that is more configurable than the
-original one; both \multiput and \xmultiput are backwards compatible with
-the original picture environment definition.
+command has been completely modified in a backwards compatible way; the
+new version allows to manipulate the increment components in a configurable
+way. A new xmultiput command has been defined that is more configurable
+than the original one; both \multiput and \xmultiput are backwards
+compatible with the original picture environment definition.
 
 This version solves a conflict with package eso-pic.
 
@@ -69,25 +72,27 @@ If you specify
 
 the package pict2e is automatically invoked with the specified options.
 
-The -almost compatible- frase is necessary to explain that this version
-of curve2e uses some `functions' of the LaTeX3 language that were made
-available to the LaTeX developers by mid October 2018. Should the user
+The -almost fully compatible- phrase is necessary to explain that this
+version of curve2e uses some `functions' of the LaTeX3 language that were
+made available to the LaTeX developers by mid October 2018. Should the user
 have an older or a basic/incomplete installation of the TeX system,
 such L3 functions might not be available. This is why this
 package checks the presence of the developer interface; in case
-such interface is not available it falls back to the previous version
-renamed curve2e-v161.sty, which is part of this bundle; this order
+such interface is not available it rolls back to the previous version
+renamed curve2e-v161.sty, which is part of this bundle; this other
 package name must not be modified in any way. The compatibility mentioned
 above implies that the user macros remain the same, but their
-implementation requires the L3 interface.
+implementation requires the L3 interface. Some macros and environments
+rely totally on the xfp package functionalities, but legacy documents
+source files should compile correctly.
 
-The package has the LPPL status of author maintained.
+The package has the LPPL status of maintained.
 
 According to the LPPL licence, you are entitled to modify this package,
 as long as you fulfil the few conditions set forth by the Licence.
 
-Nevertheless this package is an extension to the standard LaTeX package
-pict2e (2014). Therefore  any change must be controlled on the
+Nevertheless this package is an extension to the standard LaTeX
+pict2e (2014) package. Therefore any change must be controlled on the
 parent package pict2e, so as to avoid redefining or interfering with
 what is already contained in the official package.
 
@@ -101,12 +106,11 @@ Claudio Beccari
 claudio dot beccari at gmail dot com
 
 %% 
-%% 
 %% Distributable under the LaTeX Project Public License,
 %% version 1.3c or higher (your choice). The latest version of
 %% this license is at: http://www.latex-project.org/lppl.txt
 %% 
-%% This work is "author-maintained"
+%% This work is "maintained"
 %% 
 %% This work consists of file curve2e.dtx, and the derived files
 %% curve2e.sty and curve2e.pdf, plus the auxiliary derived files
diff --git a/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.pdf b/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.pdf
new file mode 100644
index 00000000000..32691f5d9b6
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.pdf
diff --git a/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.tex b/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.tex
new file mode 100644
index 00000000000..7e0a5dc1b48
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/curve2e/curve2e-manual.tex
@@ -0,0 +1,1558 @@
+% !TEX TS-program = pdflatex
+% !TEX encoding = UTF-8 Unicode
+\documentclass{article}
+\hfuzz 10pt
+\usepackage[utf8]{inputenc}
+\usepackage{lmodern,textcomp}
+\usepackage{mflogo}
+\usepackage{multicol,amsmath,fancyvrb,graphics,shortvrb,trace}
+\usepackage{xcolor,curve2e,verbatim,enumitem}
+\MakeShortVerb{\|}
+\providecommand*\diff{\mathop{}\!\mathrm{d}}
+\providecommand\meta{}\providecommand\marg{}
+\renewcommand\meta[1]{{\normalfont\textlangle\textit{#1}\textrangle}}
+\renewcommand\marg[1]{\texttt{\{\meta{#1}\}}}
+\providecommand\Marg{}
+\renewcommand\Marg[1]{\texttt{\{#1\}}}
+\providecommand\oarg{}
+\renewcommand\oarg[1]{\texttt{[\meta{#1}]}}
+\providecommand\Oarg{}
+\renewcommand\Oarg[1]{\texttt{[#1]}}
+\providecommand\aarg{}
+\renewcommand*\aarg[1]{\texttt{<\meta{#1}>}}
+\providecommand\Aarg{}
+\renewcommand\Aarg[1]{\texttt{<#1>}}
+\providecommand\parg{}
+\renewcommand\parg[1]{\texttt{(\meta{#1})}}
+\providecommand\Parg{}
+\renewcommand\Parg[1]{\texttt{(#1)}}
+\providecommand\pack{}
+\renewcommand\pack[1]{{\normalfont\textsf{#1}}}
+\providecommand\file{}
+\renewcommand\file[1]{{\normalfont\texttt{#1}}}
+\providecommand\env{}
+\renewcommand\env[1]{{\normalfont\textsf{\slshape#1}}}\let\amb\env
+\providecommand\cs{}
+\renewcommand\cs[1]{{\normalfont\texttt{\char92#1}}}
+
+\providecommand\Pbox{}
+\RenewDocumentCommand\Pbox{D(){0,0} O{cc} m O{0.5ex}}{%
+\put(#1){%
+\dimendef\Dim=2566\relax
+\settowidth\Dim{#2}%
+\edef\Rapp{\fpeval{\Dim/{1ex}}}%
+\fptest{\Rapp > 1.5}{\fboxsep=0.5ex}{\fboxsep=0.75ex}%
+\fboxrule=0pt
+\fptest{#4 = 0sp}{\makebox(0,0)[#2]{\fbox{$\relax#3\relax$}}}%
+{\edef\Diam{\fpeval{#4/\unitlength}}%
+\makebox(0,0){\circle*{\Diam}}%
+\makebox(0,0)[#2]{\fbox{$\relax\mathsf#3\relax$}}}%
+}\ignorespaces}
+
+\def\LissajousCoefs#1,#2,#3,#4,#5,#6!{%
+\edef\LAu{#1}\edef\LNu{#2}\edef\LFu{#3}%
+\edef\LAd{#4}\edef\LNd{#5}\edef\LFd{#6}}
+
+\def\LissajousCode#1#2{%
+\edef\X{\fpeval{\LAu*cosd(\LNu*#1+\LFu)}}%
+\edef\Y{\fpeval{\LAd*cosd(\LNd*#1+\LFd)}}%
+\CopyVect\X,\Y to#2\ignorespaces}
+
+\NewDocumentCommand\Lissajous{m o m}{%
+\IfValueTF{#2}{\LissajousCoefs#2!\relax
+\LissajousCode{#1}{#3}}%
+{\ifcsname LAu\endcsname
+\LissajousCode{#1}{#3}%
+\else\PackageError{Lissajous}%
+  {I parametri di questa curva di Lissajous\MessageBreak
+   Non sono mai stati definiti}{Non faccio nulla}\fi}%
+\ignorespaces}
+
+\makeatletter
+
+\NewDocumentCommand\Pall{O{1.5} R(){0,0}}{\put(#2){\circle*{#1}}}
+
+\def\legenda(#1)#2{\put(#1){\setbox3333\hbox{$#2$}%
+   \dimen3333\dimexpr\wd3333*\p@/\unitlength +3\p@\relax
+   \edef\@tempA{\strip@pt\dimen3333}%
+   \framebox(\@tempA,7){\box3333}}}
+   
+\NewDocumentCommand\Zbox{R(){0,0} O{cc} m O{1}}{%
+\put(#1){\makebox(0,0)[#2]{\fboxrule=0pt\fboxsep=3pt\fbox{$#3$}}\makebox(0,0)[cc]{\circle*{#4}}}}
+
+
+\providecommand\setfontsize{}
+\DeclareRobustCommand\setfontsize[2][1.2]{%
+\linespread{#1}\fontsize{#2}{#2}\selectfont}
+
+\newwrite\example@out
+\ProvideDocumentEnvironment{Esempio}{ O{\footnotesize} D(){0.50}}
+% All definitions and assignments are local
+% #1 := Lates font size command or  \setfontsize{<size>}
+% %2 := \textwidth percentage for the code box; the complement, less the
+%       column gap for the result dedicata al codice
+% Syntax: \begin{Esempio}[<size command>](<code box percentage width>)
+% Warning: No extra space is put before and/or after the display; this
+%       environment is assumed to be used within a figure environment
+%       that already provides its on vertical spaces. Should this
+%       environment be used  between paragraphs, the user should manually
+%       provide a convenient amount of space above and below it.
+% Remember: This environment sets itself in vertical mode
+{\par\dimendef\Wboxu=2570 \dimendef\Wboxd=2572
+\Wboxu=#2\linewidth\relax
+\Wboxd=\dimexpr\linewidth-\columnsep-\Wboxu\relax
+\begingroup
+\@bsphack
+\immediate\openout\example@out\jobname-temp.tex
+\let\do\@makeother\dospecials\catcode`\^^M\active
+\def\verbatim@processline{%
+  \immediate\write\example@out{\the\verbatim@line}}%
+\verbatim@start\relax}%
+{\immediate\closeout\example@out\@esphack\endgroup
+\begin{lrbox}{0}%
+\begin{minipage}{\linewidth}%
+\begin{minipage}{\Wboxu}#1\relax
+\verbatiminput{\jobname-temp.tex}
+\end{minipage}%
+\hfill
+\begin{minipage}{\Wboxd}\raggedleft
+\input{\jobname-temp}%
+\end{minipage}
+\end{minipage}%
+\end{lrbox}\par\medskip
+\noindent\makebox[\linewidth]{\box0}\par}
+
+\providecommand\GetFileInfo[1]{%
+  \def\filename{#1}%
+  \def\@tempb##1 v.##2 ##3\relax##4\relax{%
+    \def\filedate{##1}%
+    \def\fileversion{##2}%
+    \def\fileinfo{##3}}%
+  \edef\@tempa{\csname ver@#1\endcsname}%
+  \expandafter\@tempb\@tempa\relax? ? \relax\relax}
+
+\begin{document}
+
+\author{Claudio Beccari\thanks{E-mail: \texttt{claudio dot beccari at gmail dot com}}}
+\title{Package \pack{curve2e} user manual}
+\GetFileInfo{curve2e.sty}
+\date{Version \fileversion~--~Last revised \filedate}
+\maketitle
+\columnseprule=0.4pt
+\begin{multicols}{2}
+ \tableofcontents
+ \end{multicols}
+
+\begin{abstract}
+This file contains the user manual of the \pack{curve2e} extension package to  the \pack{pict2e} bundle; the latter was described by Lamport himself in the 1994 second edition of his \LaTeX\ handbook.
+
+Please take notice that on April 2011 a package \pack{pict2e} upgraded version  has been released that incorporates some of the commands defined in early versions of this package; apparently there are no conflicts, because        \pack{curve2e} contains only the advanced features that extend the above package.
+
+Since this extension redefines some commands and introduces some more drawing facilities (that allow to draw circular arcs and arbitrary curves with the minimum of user intervention) the user needs a user manual that contains several actual examples. The software available to show the code and its result after compilation is incompatible with the usual \LaTeX\     |ltxdoc| class for code documentation, therefore a separate user manual has been made available. If the user wants to explore the \pack{curve2e} code and its documentation s/he has available the documented file |curve2e.pdf|.
+\end{abstract}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\section{Installation} 
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+If you installed your \TeX\ system with a \TeX~Live or a Mik\TeX\ complete and updated distribution  you already have this package installed; in order to verify open a terminal or command prompt window and use it to enter the \texttt{texdoc curve2e-manual}; as soon as the command is executed a screen window should open displaying this manual. If this does not happen, either you misspelt the command (it happens more often than not), or your installation is not complete and updated. 
+
+I suggest you to youse your computer installation facilities to install this bundle. Otherwise, download this curve2e.zip package from one of  the CTAN (Comprehensive TeX Archive Network) archives, to your downloads folder. 
+Before doing anything else verify if you have a personal \texttt{temf} tree; if not, create one reading you distribution instruction; let us assume that your personal |texmf| archive is in |HOME/texmf| (on Windows change the slash with a backslash) and |HOME| is a path starting from the root of you hard disk and going though several other folders. On Windows~10 it might be |C:\Users\YouName|; on Linux it might be simply |~|; On Mac it would be     |~\Library|, but sometimes the |HOME| might be different, especially o Windows platforms. Create the following subfolders:
+\begin{enumerate}[noitemsep]
+\item |HOME/texmf/source/latex/curve2e/|
+\item |HOME/texmf/doc/latex/curve2e/|
+\item |HOME/texmf/tex/latex/curve2e/|
+\end{enumerate} 
+
+Now move file \file{curve2e.zip} to the  |.../source/latex/curve2e/| folder; the decompress the |.zip| file with the software you have on board of your platform. Run with |pdflatex| on |.dtx| file; then do the same with the     |curve2e-manual.tex|. You might need to repeat these compilations two or three times in order to have  the table of contents and all the references correctly connected.
+
+This done move the |.pdf| files to the |.../doc/latex/curve2e/| folder. and move the |.sty| files to the |.../tex/latex/curve2e/| folder.
+
+Clear the |.../source/latex/curve2e/| folder from the auxiliary files, all those remaining in the folder except those that have the extensions |.zip|, |.dtx|, |.tex|, and |.txt|.  Read the \file{README.txt} file.
+
+If your \TeX\ system is correctly set up, your files in your persanl tree should be immediately usable; probably you have to create the file name database with Mik\TeX; in this case read the documentation of your Mik\TeX\ installation to discover how to~do~it.
+
+Remember to delete all these subfolders if you decide to install a complete updated version of your favourite distribution,  and if you  keep it updated approximately once every 7-10 days. This is much simpler than to struggle with these manual operations. 
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \section{Package \pack{pict2e} and this extension \pack{curve2e}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ Package \pack{pict2e} was announced in issue 15 of \file{latexnews}
+ around December 2003; it was declared that the new package would
+ replace the dummy one that has been accompanying every release of
+ \LaTeXe\ since its beginnings in 1994. The dummy package was just
+ issuing an info message that simply announced the temporary
+ unavailability of the real package.
+
+ Eventually Gäßlein and Niepraschk implemented what Lamport himself had
+ already documented in the second edition of his \LaTeX\ handbook, that
+ is a \LaTeX\ package that contained the macros capable of removing all
+ the limitations contained in the standard commands of the original
+ \texttt{picture} environment; specifically what follows.
+ 
+ \begin{enumerate}[noitemsep]
+ \item The line and vector slopes were limited to the ratios of relative
+ prime one-digit integers of magnitude not exceeding 6 for lines and 4
+ for vectors.
+%
+ \item Filled and unfilled full circles were limited by the necessarily
+ limited number of specific glyphs contained in the special \LaTeX\
+ \texttt{picture} fonts.
+%
+ \item Quarter circles were also limited in their radii for the same
+ reason.
+%
+ \item Ovals (rectangles with rounded corners) could not be too small
+ because of the unavailability of small radius quarter circles, nor
+ could be too large, in the sense that after a certain radius the
+ rounded corners remained the same and would not increase proportionally
+ to the oval size.
+%
+ \item Vector arrows had only one possible shape and matched the limited
+ number of vector slopes.
+%
+ \item For circles and inclined lines and vectors just two possible
+ thicknesses  were available.
+ \end{enumerate}
+
+ Package \pack{pict2e} removes most if not all the above
+ limitations.
+ \begin{enumerate}[noitemsep]
+ \item Line and vector slopes are virtually unlimited; the only
+ remaining limitation is that the direction coefficients must be
+ three-digit integer numbers; they need not be relatively prime; with
+ the 2009 upgrade even this limitation was removed and now slope
+ coefficients can be any fractional number whose magnitude does not
+ exceed 16\,384, the maximum dimension in points that \TeX\ can handle.
+%
+ \item Filled and unfilled circles can be of any size.
+%
+ \item Ovals can be designed with any specified corner curvature and
+ there is virtually no limitation to such curvatures; of course corner
+ radii should not exceed half the lower value between the base and the
+ height of the oval.
+%
+ \item There are two shapes for the arrow tips; the triangular one
+ traditional with \LaTeX\ vectors, or the arrow tip with PostScript
+ style.
+%
+ \item The |\linethickness| command changes the thickness of all lines,
+ straight, curved, vertical, horizontal, arrow tipped, et cetera.
+ \end{enumerate}
+
+ This specific extension package \pack{curve2e} adds the following features.
+ \begin{enumerate}[noitemsep]
+ \item Point coordinates my be specified in both cartesian and polar
+ form: internally they are handled as cartesian coordinates, but the
+ user can specify  his/her points also in polar form. In order to avoid
+ confusion with other graphic packages, \pack{curve2e} uses the usual comma
+ separated couple \meta{$x,y$} of integer or fractional numbers for
+ cartesian coordinates, and the couple \meta{$\theta$}:\meta{$\rho$} for
+ polar coordinates (the angle preceding the radius). 
+ All graphic object commands accept polar or cartesian coordinates at
+ the choice of the user who may use for each object the formalism s/he
+ prefers. Also the |\put| and |\multiput| commands have been redefined so
+ as to accept cartesian or polar coordinates.
+
+ Of course the user should pay attention to the meaning of cartesian
+ vs. polar coordinates. Both imply a displacement with respect to the
+ actual origin of the axes. So when a circle is placed at coordinates
+ $a,b$ with a normal |\put| command, the circle is placed exactly in
+ that point; with a normal |\put| command the same happens if
+ coordinates $\alpha{:}\rho$ are specified.
+ But if the |\put| command is nested into another |\put| command, the
+ current origin of the axes is displaced — this is obvious and the
+ purpose of nesting |\put| commands is exactly that. But if a segment
+ is specified so that its ending point is at a specific distance and in
+ specific direction form its starting point, polar coordinates appear to 
+ be the most convenient to use; in this case, though, the origin of the
+ axes becomes the stating point of the segment, therefore the segment
+ might be drawn in a strange way. Attention has been
+ paid to avoid such misinterpretation, but maybe some unusual
+ situation may not have come to my mind; feedback is very welcome.
+ Meanwhile pay attention when you use polar coordinates.
+%
+\item Most if not all cartesian coordinate pairs and slope pairs are
+ treated as \emph{ordered pairs}, that is \emph{complex numbers}; in
+ practice the user does not notice any difference from what s/he was
+ used to, but all the mathematical treatment to be applied to these
+ entities is coded as complex number operations, since complex numbers
+ may be viewed non only as ordered pairs, but also as vectors or as
+ roto-amplification operators.
+%
+ \item Commands for setting the line terminations were introduced; the
+ user can chose between square or rounded caps; the default is set to
+ rounded caps; now this feature is directly available with \pack{pict2e}.
+%
+ \item Commands for specifying the way two lines or curves join to one
+ another.
+ %
+ \item Originally the |\line| macro was redefined so as to allow large
+ (up to three digits) integer direction coefficients, but maintaining
+ the same syntax as in the original \texttt{picture} environment; now 
+ \pack{pict2e} removes the integer number limitations and allows fractional
+ values, initially implemented by \pack{curve2e}.
+ %
+ \item A new macro |\Line| was originally defined by \pack{curve2e} so as to
+ avoid the need to specify the horizontal projection of inclined lines;
+ now this functionality is available directly with \pack{pict2e}; but this
+ \pack{curve2e} macro name now conflicts with \pack{pict2e} 2009 version;
+ therefore its name is changed to |\LIne| and supposedly it will not be
+ used very often, if ever, by the end user (but it is used within this
+ package macros).
+ %
+ \item A new macro |\LINE| was defined in order to join two points
+ specified with their coordinates; this is now the normal behaviour of
+ the |\Line| macro of \pack{pict2e} so that in this package |\LINE| is now
+ renamed |\segment|; there is no need to use the |\put| command with
+ this segment specification.
+ %
+ \item A new macro |\DashLine| (alias: |\Dline|) is defined in order to
+ draw dashed lines joining any two given points; the dash length and
+ gap (equal to one another) get specified through one of the macro
+ arguments.The starting point may be specified in cartesiano or polar
+ form; the end point in cartesian format specifies the desired end
+ point; while if the second point is in polar form it is meant
+ \emph{relative to the starting point}, not as an absolute end point.
+ See the examples further on.
+ %
+ \item A similar new macro |\Dotline| is defined in order to draw dotted 
+ straight lines as a sequence of equally spaced dots, where the gap can
+ be specified by the user; such straight line may have any inclination,
+ as well as the above dashed lines.Polar coordinates for the second
+ point have the same relative meaning as specified for the |\Dashline|
+ macro. The dot diameter may be specified with an optional argument; by default this diameter equals the |1pt| width.
+ %
+ \item Similar macros are redefined for vectors; |\vector| redefines the
+ original macro but with the vector slope limitations removed; |\Vector|
+ gets specified with its two horizontal and vertical components in
+ analogy with |\LIne|; |\VECTOR| joins two specified points (without
+ using the |\put| command) with the arrow pointing to the second point.
+%
+ \item A new macro |\polyline| for drawing polygonal lines is defined
+ that accepts from two vertices up to an arbitrary (reasonably limited)
+ number of them (available now also in \pack{pict2e}); here it is redefined
+ so as to allow an optional specification of the way segments for the
+ polyline are joined to one another. Vertices may be specified with
+ polar coordinates and are always relative to the preceding point.
+%
+ \item The \pack{pict2e} |polygon| macro to draw closed polylines (in
+ practice general polygons) has been redefined in such a way that it
+ can accept the various vertices specified with (relative) polar
+ coordinates. The |polygon*| macro produces a color filled polygon; the
+ default color is black, but a different color may be specified with the
+ usual |\color| command given within the same group where |\polygon*| is
+ enclosed.
+%
+ \item A new macro |\Arc| is defined in order to draw an arc with
+ arbitrary radius and arbitrary aperture (angle amplitude); this
+ amplitude is specified in sexagesimal degrees, not in radians; a
+ similar functionality is now achieved with the |\arc| macro of
+ \pack{pict2e}, which provides also the starred version |\arc*| that fills
+ up the interior of the generated circular arc with the current color.
+ It must be noticed that the syntax is slightly different, so that it's
+ reasonable that these commands, in spite of producing identical arcs,
+ might be more comfortable with this or that syntax.
+%
+ \item Two new macros |\VectorArc| and |\VectorARC| are defined in order
+ to draw circular arcs with an arrow at one or both ends.
+%
+ \item A new macro |\Curve| is defined so as to draw arbitrary curved
+ lines by means of cubic Bézier splines; the |\Curve| macro requires
+ only the curve nodes and the directions of the tangents at each
+ node. The starred version fills up the interior of the curve with the
+ current color.
+%
+ \item the above |\Curve| macro is a recursive macro that can draw an
+ unlimited (reasonably limited) number of connected Bézier spline arcs
+ with% continuous tangents except for cusps; these arcs require only the
+ specification of the tangent direction at the interpolation nodes.
+ It is possible to use a lower level macro |\CbezierTo| that does the
+ same but lets the user specify the control points of each arc; it is
+ more difficult to use but it is more performant.
+%
+ \item The basic macros used within the cumulative |\Curve| macro can be
+ used individually in order to draw any curve, one cubic arc at the
+ time; but they are intended for internal use, even if it is not
+ prohibited to use them; by themselves such arcs are not different form
+ those used by |Curve|, but the final command, |\FillCurve|, should be
+ used in place of |\CurveFinish|, so as to fill up the closed path with
+ the locally specified color; see figure~\ref{fig:colored-curve}. 
+ It is much more convenient to use the starred version of the |\Curve|
+ macro.
+ \end{enumerate}
+
+ The \pack{pict2e} package already defines macros such as |\moveto|,
+ |\lineto|, |\curveto|, |\closepath|, |\fillpath|, and |\strokepath|;
+ of course these macros can be used by the end user, and sometimes they
+ perform better than the macros defined in this package, because the
+ user has a better control on the position of the Bézier splines
+ control points, while here the control points are sort of rigid. It
+ would be very useful to resort to the \pack{hobby} package, but its macros
+ are compatible with those of the \pack{tikz} and \pack{pgf} packages, not
+ with\pack{curve2e}; an interface should be created in order to deal with 
+ the \pack{hobby} package, but this has not been done yet.
+ In any case they are redefined so as to accept symbolic names for the
+ point coordinates in both the cartesian and polar form.
+
+ In order to make the necessary calculations many macros have been
+ defined so as to use complex number arithmetics to manipulate point
+ coordinates, directions (unit vectors, also known as `versors'),
+ rotations and the like. In the first versions of this package the
+ trigonometric functions were also defined in a way that the author
+ believed to be more efficient than those defined by the \texttt{trig}
+ package; in any case the macro names were sufficiently different to
+ accommodate both definition sets in the same \LaTeX\ run. With the
+ progress of the \LaTeX\,3 language, package \pack{xfp} has recently become
+ available, by which any sort of calculations can be done with floating
+ point decimal numbers; therefore the most common algebraic, irrational
+ and transcendental functions can be computed in the background with the
+ stable internal floating point facilities. We maintain some computation
+ with complex number algebra, but use the |xfp| functionalities for
+ other computations.
+
+ Many aspects of this extension could be fine tuned for better
+ performance; many new commands could be defined in order to further
+ extend this extension. If the new service macros are accepted by other
+ \TeX\ and \LaTeX\ programmers, this version could become the start for
+ a real extension of the \pack{pict2e} package or even become a part of
+ it. Actually some macros have already been included in the \pack{pict2e}
+ package. The |\Curve| algorithm, as said before, might be redefined
+ so as to use the macros  introduced by the \pack{hobby} package, that
+ implements for the \pack{tikz} and \pack{pgf} packages the same 
+ functionalities that John Hobby implemented for the \MF\ and \MP\ programs. 
+
+ For these reasons I suppose that every enhancement should be submitted
+ to Gäßlein, Niepraschk, and Tkadlec who are the prime maintainers of
+ \pack{pict2e}; they are the only ones who can decide whether or not
+ to incorporate new macros in their package.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \section{Summary and examples of new commands}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ This package \pack{curve2e} extends the power of \pack{pict2e} with
+ the following modifications and the following new commands.
+ \begin{enumerate}[noitemsep]
+ \item This package \pack{curve2e} calls directly the \LaTeX\ packages
+ |color| and \pack{pict2e}; it passes to the latter one any possible option that
+ it can receive; actually the only options that make sense for
+ \pack{pict2e} are those concerning the arrow tips, either \LaTeX\ or
+ PostScript styled, because it is assumed that if this package is used,
+ the original \LaTeX\ commands are of no interest: see the
+ \pack{pict2e} documentation in order to see the correct options \pack{pict2e}
+ can receive. If the user wants to use the \pack{xcolor} package, it has to
+ load this one \emph{before} \pack{curve2e}.
+%%
+ \item The user is offered new commands in order to control the line
+ terminators and the line joins; specifically:
+ \begin{itemize}
+ \item |\roundcap|: the line is terminated with a semicircle;
+ \item |\squarecap|: the line is terminated with a half square;
+ \item |\roundjoin|: two lines are joined with a rounded join;
+ \item |\beveljoin|: two lines are joined with a bevel join;
+ \item |\miterjoin|: two lines are joined with a miter join.
+ \end{itemize}
+ All the above commands should respect the intended range; but since
+ they act at the PostScript or PDF level, not at \TeX\ level, it might
+ be necessary to issue the necessary commands in order to restore the
+ previous terminator or join; in other words, groups and environments do
+ not have any influence on these commands.
+%%
+ \item The commands |\linethickness|, |\thicklines|, |\thinlines|
+ together with |\defaultlinethickness| always redefine the internal
+ |\@wholewidth| and |\@halfwidth| so that the latter ones always
+ refer to a full width and to a half of it in this way: if you issue
+ the command {\setfontsize{8.75}|\defaultlinethickness{2pt}|} all thin lines will be
+ drawn with a thickness of 1\,pt while, if a drawing command
+ directly refers to the internal value |\@wholewidth|, its line
+ will be drawn with a thickness of 2\,pt. If one issues the
+ declaration |\thinlines| all lines will be drawn with
+ a  1\,pt width, but if a command refers to the internal value
+ |\@halfwidth| the line will be drawn with a thickness of 0.5\,pt.
+ The command |\linethickness| redefines the above internals but
+ does not change the default width value; all these width
+ specifications apply to all lines, straight ones, curved ones,
+ circles, ovals, vectors, dashed lines, and so on. It's better
+ to recall that |\thinlines| and |\thicklines| are declarations
+ that do not take arguments; on the opposite the other commands
+ follow the standard syntax:
+ \begin{flushleft}
+ |\linethickness|\marg{dimensioned value}\\
+ |\defaultlinethicknes|\marg{dimensioned value}
+ \end{flushleft}
+ where \meta{dimensioned value} means either a length specification
+ complete of its units, or a dimensional expression.
+%%
+ \item Straight lines and vectors are redefined in such a way that
+ fractional slope coefficients may be specified; the zero length
+ line does not produce errors and is ignored; the zero length vectors draw
+ only the arrow tips. 
+%%
+ \item New line and vector macros are defined that avoid the necessity
+ of specifying the horizontal component; |\put(3,4){\LIne(25,15)}|
+ specifies a segment that starts at point $(3,4)$ and goes to point
+ $(3+25,4+15)$; the command |\segment(3,4)(28,19)| achieves the same
+ result without the need of using the |\put| command. Therefore |\LIne|
+ is just for internal usage, rather than a user command. Now \pack{curve2e} 
+ has available also the “arc vectors” with the arrow tip at one or at both 
+ ends.
+
+ The same applies to the vector commands |\Vector| and |\VECTOR| and
+ |\VVECTOR|; the latter command behaves as |\VECTOR| but draws a vector
+ with arrow tips at both ends; furthermore this command is available
+ only with main versions~2 or higher of \pack{curve2e}.
+ 
+ Experience has shown that the commands intended to join two specified
+ points are particularly useful.
+
+\begin{figure}
+\begin{Esempio}[\small](0.60)
+\unitlength=0.01\linewidth
+\begin{picture}(80,20)
+\GraphGrid(80,20)
+\put(0,0){\vector(1.5,2.3){10}}
+\put(20,0){\Vector(10,15.33333)}
+\VECTOR(40,0)(50,15.33333)
+\ifdefined\VVECTOR \VVECTOR(60,0)(80,10)\fi
+\end{picture}
+\end{Esempio}
+  \caption{Three (displaced) identical vectors obtained with the three
+           vector macros\ifdefined\VVECTOR; a double tipped vector is
+           also shown\fi.}\label{fig:vectors}
+\end{figure}
+%%
+ \item The |\polyline| command has already been introduced in \pack{pict2e}:  in \pack{curve2e} it is redefined so as to accept also polar coordinates this new version of |\polyline| accepts also an optional argument to specify how two consecutive segments join together;; it accepts an unlimited list of point coordinates, possibly stored in macros, enclosed within round parentheses; the command draws a sequence of connected segments that join in order the specified points; the syntax is:
+	\begin{flushleft}
+\cs{polyline}\oarg{optional join style}\parg{$P_1$}\parg{$P_2$}\texttt{...}\parg{$P_n$}
+	\end{flushleft}
+ See figure~\ref{fig:polyline} where a regular pentagon is drawn; usage
+ of polar coordinates is also shown; please notice how  polar
+ coordinates act in this figure.
+
+	\begin{figure}[!ht]
+	\begin{Esempio}[\small](0.55)
+	\unitlength=.5mm
+	\begin{picture}(40,32)(-20,-17)
+	\polyline(90:20)(162:20)(234:20)(306:20)(378:20)(90:20)
+	\end{picture}
+\end{Esempio}
+	\caption{Polygonal line obtained by means of the \texttt{\string\polyline}
+   command; vertex coordinates are in polar form.}
+	\label{fig:polyline}
+	\end{figure}
+
+ Examples of using polar and cartesian coordinates are shown in 
+ figure~\ref{fig:polar}.
+
+\begin{figure}[htb]
+\begin{Esempio}[\normalsize]%
+\unitlength=0.02\textwidth
+\begin{picture}(40,30)
+\GraphGrid(40,30)
+\Zbox(40,0)[l]{40,0}[1]
+\Zbox(90:30)[bc]{90{:}30}[1]
+\Zbox(60:30)[bc]{60{:}30}[1]
+\Zbox(30,30)[bc]{30,30}[1]
+\multiput(0,0)(30:10){5}%
+   {\makebox(0,0){\rule{1.5mm}{1.5mm}}}
+\end{picture}
+\end{Esempio}
+\caption[Use of cartesian and absolute polar coordinates]{Use of
+ cartesian and absolute polar coordinates. The \texttt{\string\Zbox}
+ macro is just a shortcut to set a small dot with a (math) legend close
+ to it.}
+\label{fig:polar}
+\end{figure}
+
+ A similar example may be obtained with the |\polygon| macro that does
+ not require to terminate the polyline at the starting point.
+ Figure~\ref{fig:polygon} shows how to get a coloured filled pentagon.
+
+\begin{figure}[!ht]
+\begin{Esempio}[\normalsize]%
+\unitlength=.5mm
+\begin{picture}(40,32)(-20,-20)
+\color{magenta}
+\polygon*(90:20)(162:20)(234:20)(306:20)(378:20)
+\end{picture}
+\end{Esempio}
+	\caption{A pentagon obtained by means of the \texttt{\string\polygon*}
+   command; vertex coordinates are in relative polar form.}
+	\label{fig:polygon}
+	\end{figure}
+%
+ \item The new command |\Dashline| (alias: |\Dline| for backwards
+ compatibility):
+ \begin{flushleft}
+ |\Dashline|\parg{first point}\parg{second point}\marg{dash length}
+ \end{flushleft}
+ draws a dashed line containing as many dashes as possible, just as long
+ as specified, and separated by a gap exactly the same size; actually,
+ in order to make an even gap-dash sequence, the desired dash length is
+ used to do some computations in order to find a suitable length, close
+ to the one specified, such that the distance of the end points is
+ evenly divided in equally sized dashes and gaps.
+ The end points may be anywhere in the drawing area, without any
+ constraint on the slope of the joining segment. The desired dash length
+ is specified as a fractional multiple of |\unitlength|; see
+ figure~\ref{fig:dashline}.
+
+\begin{figure}[!ht]
+\begin{Esempio}[\normalsize]%
+\unitlength=1mm
+\begin{picture}(40,40)
+\GraphGrid(40,40)
+\Dashline(0,0)(40,10){4}
+\put(0,0){\circle*{2}}
+\Dashline(40,10)(0,25){4}
+\put(40,10){\circle*{2}}
+\Dashline(0,25)(20,40){4}
+\put(0,25){\circle*{2}}
+\put(20,40){\circle*{2}}
+\Dotline(0,0)(40,40){2}[0.75mm]
+\put(40,40){\circle*{2}}
+\end{picture}
+\end{Esempio}
+\caption{Dashed lines and graph grid}\label{fig:dashline}
+\end{figure}
+
+ Another example of usage of cartesian and polar coordinates usage is 
+ shown in figure~\ref{fig:polar} together with its code.
+ 
+\begin{figure}
+\begin{Esempio}[\normalsize]%
+\unitlength=0.025\textwidth
+\begin{picture}(40,30)
+\GraphGrid(40,30)
+\Dashline(0,0)(40,10){2}
+\Dashline(0,0)(40,20){2}
+\Dashline(0,0)(40,30){2}
+\Dashline(0,0)(30,30){2}
+\Dashline(0,0)(20,30){2}
+\Dashline(0,0)(10,30){2}
+{\color{blue}%
+\Dashline(40,0)(108:30){2}
+\Dashline(40,0)(126:30){2}
+\Dashline(40,0)(144:30){2}
+\Dashline(40,0)(162:30){2}}
+\end{picture}
+\end{Esempio}
+\caption{Different length dashed lines with the same nominal dash
+ length; notice the relative polar coordinates used for the dashed
+ lines starting at the grid lower right vertex.}
+\label{fig:dashedlines}
+\end{figure}
+%%
+\item Analogous to |\Dashline|, a new command |\Dotline| draws a dotted
+ line with the syntax:
+ \begin{flushleft}
+ |\Dotline|\parg{first point}\parg{end point}\marg{dot gap}
+ \end{flushleft}
+ See figures~\ref{fig:dashline} and~\ref{fig:dottedlines} for examples.
+
+\begin{figure}[htb]
+\begin{Esempio}[\normalsize]%
+\unitlength=0.025\textwidth
+\begin{picture}(40,30)
+\GraphGrid(40,30)
+\Dotline(0,0)(40,10){1.5}[2pt]
+\Dotline(0,0)(40,20){1.5}[2pt]
+\Dotline(0,0)(40,30){1.5}[2pt]
+\Dotline(0,0)(30,30){1.5}[2pt]
+\Dotline(0,0)(20,30){1.5}[2pt]
+\Dotline(0,0)(10,30){1.5}[2pt]
+{\color{red}\relax
+\Dotline(40,0)(108:30){1.5}
+\Dotline(40,0)(126:30){1.5}[2pt]
+\Dotline(40,0)(144:30){1.5}[2pt]
+\Dotline(40,0)(162:30){1.5}[2pt]}%
+\end{picture}
+\end{Esempio}
+\caption{Different length dotted lines with the same nominal dot gap;
+ again notice the relative polar coordinates for the dotted lines
+ starting at the grid lower right vertex.}
+\label{fig:dottedlines}
+\end{figure}
+%%>>>
+ \item |\GraphGrid| is a command that draws a red grid under the drawing 
+ with lines separated |10\unitlength|s apart; it is described only with
+ a comma separated couple of numbers, representing the base and the
+ height of the grid, see figure~\ref{fig:dashline}; it's better to
+ specify multiples of ten and the grid can be placed anywhere in the
+ drawing canvas by means of |\put|, whose cartesian coordinates are
+ multiples of 10; nevertheless the grid line distance is rounded to the
+ nearest multiple of 10, while the point coordinates specified to |\put|
+ are not rounded at all; therefore some care should be used to place the
+ working grid on the drawing canvas. This grid is intended as an aid
+ while drawing; even if you sketch your drawing on millimetre paper, the
+ drawing grid turns out to be very useful; one must only delete or
+ comment out the command when the drawing is finished. Several examples
+ of usage of such grid are shown in several figures.
+%%
+ \item New trigonometric function macros have been  computed by means of
+ the functionalities of the |xfp| package. The difference woth the other
+ existing macros is that angles are specified in sexagesimal degrees, so
+ that the users need not transform to radians. The computations are done
+ taking into account that “abnormal” values can occasionally be avoided,
+ for example $\tan90^\circ$ must be avoided and replaced with a suitably
+ large number, because the TeX\ system does not handle “infinity”.
+
+ These trigonometric functions are used within the complex number
+ macros; but if the user wants to use them the syntax is the following:
+\begin{flushleft}
+      \cs{SinOf}\meta{angle}\texttt{to}\meta{control sequence}\\
+      \cs{CosOf}\meta{angle}\texttt{to}\meta{control sequence}\\
+      \cs{TanOf}\meta{angle}\texttt{to}\meta{control sequence}
+\end{flushleft}
+ The \meta{control sequence} may then be used, for example, as a
+ multiplying factor of a length.
+ 
+%%
+ \item Arcs can be drawn as simple circular arcs, or with one or two
+ arrows at their ends (curved vectors);  the syntax is:
+\begin{flushleft}
+ \cs{Arc}\parg{center}\parg{starting point}\marg{angle}\\
+ \cs{VectorArc}\parg{center}\parg{starting point}\marg{angle}\\
+ \cs{VectorARC}\parg{center}\parg{starting point}\marg{angle}\\
+\end{flushleft}
+ If the angle is specified numerically it must be enclosed in braces,
+ while if it is specified with a control sequence the braces (curly
+ brackets) are not necessary. The above macro |\Arc| draws a simple
+ circular arc without arrows; |\VectorArc| draws an arc with an arrow
+ tip at the ending point; |\VectorARC| draws an arc with arrow tips at
+ both ends; see figure~\ref{fig:arcs}.
+	\begin{figure}
+	\begin{Esempio}[\small]%
+	\unitlength=0.5mm
+	\begin{picture}(60,40)
+	\GraphGrid(60,40)
+	\Arc(0,20)(30,0){60}
+	\VECTOR(0,20)(30,0)\VECTOR(0,20)(32.5,36)
+	\VectorArc(0,20)(15,10){60}
+	\put(20,20){\makebox(0,0)[l]{$60^\circ$}}
+	\VectorARC(60,20)(60,0){-180}
+	\end{picture}
+	\end{Esempio}
+	\caption{Arcs and curved vectors}\label{fig:arcs}
+	\end{figure}
+%%
+ \item A multitude of commands have been defined in order to manage
+ complex numbers; actually complex numbers are represented as a comma
+ separated pair of fractional numbers (here we use only cartesian
+ coordinates). They are used to address specific points in the drawing
+ plane, but also as operators so as to scale and rotate other objects.
+ In the following \meta{vector} means a comma separated pair of
+ fractional numbers, \meta{vector macro} means a macro that contains a
+ comma separated pair of fractional numbers; \meta{angle macro} means a
+ macro that contains the angle of a vector in sexagesimal degrees;
+ \meta{argument} means a brace delimited numeric value, even a macro;
+ \meta{numeric macro} means a macro that contains a fractional number;
+ \textit{macro} is a valid macro name, i.e.~a backslash followed by
+ letters, or anything else that can receive a definition. A
+ \emph{direction} of a vector is its versor; the angle of a vector is
+ the angle between the vector and the positive $x$ axis in
+ counterclockwise direction, as it is used in the
+ Euler formula $ \vec{v} = Me^{\mathrm{j}\varphi}$.
+
+ \begin{itemize}
+ \item |\MakeVectorFrom|\meta{numeric macro}\meta{numeric macro}|to|\meta{vector macro}
+ \item |\CopyVect|\meta{first vector}|to|\meta{second vector macro}
+ \item |\ModOfVect|\meta{vector}|to|\meta{modulus macro}
+ \item |\DirOfvect|\meta{vector}|to|\meta{versor macro}
+ \item |\ModAndDirOfVect|\meta{vector}|to|\meta{modulus macro}|and|\meta{versor macro}
+ \item |\ModAndAngleOfVect|\meta{vector}|to|\meta{modulus macro}|and|\meta{angle macro}
+ \item {\setfontsize{10}|\DistanceAndDirOfVect|\meta{1st vector} |minus|\meta{2nd vector} |to|\meta{distance macro} |and|\meta{versor macro}}
+ \item |\XpartOfVect|\meta{vector}|to|\meta{macro}
+ \item |\YpartOfVect|\meta{vector}|to|\meta{macro}
+ \item |\DirFromAngle|\meta{angle}|to|\meta{versor macro}
+ \item |\ArgOfVect|\meta{vector}|to|\meta{angle macro}
+ \item |\ScaleVect|\meta{vector}|by|\meta{scaling factor}|to|\meta{vector macro}
+ \item |\ConjVect|\meta{vector}|to|\meta{conjugate vector macro}
+ \item |\SubVect|\meta{subtrahend vector}|from|\meta{minuend vector}|to|\meta{vector macro}
+ \item |\AddVect|\meta{first vector}|and|\meta{second vector}|to|\meta{vector macro}
+ \item |\Multvect|\marg{first vector}*\marg{second vector}*\marg{vector macro} (the asterisks are optional; either one changes the second vector into its complex conjugate)
+ \item |\MultVect|\meta{first vector}|by|\meta{second vector}|to|\meta{vector macro} (discouraged; maintained for backwards compatibility)
+ \item |\MultVect|\meta{first vector}|by*|\meta{second vector}|to|\meta{vector macro} (discouraged; maintained for backwards compatibility)
+ \item |\Divvect|\marg{dividend vector}\marg{divisor vector}\marg{ vector macro}
+ \item |\DivVect|\meta{dividend vector}|by|\meta{divisor vector}|to|\meta{vector macro} (maintained for backwards compatibility)
+ \end{itemize}
+%%
+ \item General curves can be drawn with the \pack{pict2e} macro |\curve| but
+ it requires the specification of the third-order Bézier-spline control
+ points; sometimes it's better to be very specific with the control
+ points and there is no other means to do a decent graph; sometimes the
+ curves to be drawn are not so tricky and a general set of macros can be
+ defined so as to compute the control points, while letting the user
+ specify only the nodes through which the curve must pass, and the
+ tangent direction of the curve in such nodes. Such commands are the
+ following:
+\begin{itemize}[noitemsep]
+
+\item \cs{Curve}  draws a sequence of arcs as explained above, using
+ third order (cubic) Bézier splines. The starred version of this command
+ fills the internal part of the curve with the current color; if the
+ last arc finishes where the fist arc starts, it is clear what is the
+ interior; if it does not, the driver (not the code of this package,
+ but the driver between this code and the physical representation on
+ paper or screen) assumes a straight line closure of the whole path.
+
+\item \cs{Qurve} is similar to |\Curve|, but with second order (quadratic)
+ Bézier splines. The starred version fills the interior with the current
+ color.
+
+\item \cs{CurveBetween} draws a single cubic Bézier spline between two
+ given nodes and with two given directions vectors.
+
+\item \cs{CBezierBetween}  draws a single cubic Bézier spline between
+ two given nodes, with two given direction versors along which the
+ control node distances are specified. This is the most general macro
+ (rather difficult to use) with which not only the arc end points are
+ specified but also the control nodes coordinates are given.
+
+\end{itemize}
+
+ The main macro is |\Curve| and must be followed by an “unlimited”
+ sequence of node-direction coordinates as a quadruple
+ defined as
+\[
+ \parg{node coordinates}\aarg{direction vector}
+\]
+ Possibly if a sudden change of direction has to be performed (cusp)
+ another item can be inserted after one of those quadruples in the form
+\[
+ \mbox{\dots\parg{...}\aarg{...}\oarg{new direction vector}\parg{...}\aarg{...}\dots}
+\]
+
+ Possibly it is necessary to specify the “tension” or the “looseness”
+ of a specific Bézier arc; such tension parameters range from 0 (zero)
+ to~4; the zero value implies a very stiff arc, as if it was a string
+ subject to a high tension (i.e. with zero looseness); a value of~4
+ implies a very low tension (very high looseness), almost as if the
+ string was not subject to any tension. In \MF\ or \MP\ language such a
+ concept is used very often; in this package, where the Hobby
+ algorithms are not used, the parameter value appears to mean the
+ opposite of tension.
+ A couple of comma separated tension values may be optionally used, they
+ are separated with a semicolon form the direction vector,
+ and they apply to the arc terminating with the last node; their
+ specification  must precede any possible change of tangent according to
+ this syntax\footnote{The tension may be specified only for cubic
+ splines, because the quadratic ones do not use enough parameters to
+ control the tension; not all commands for drawing cubic splines accept
+ this optional tension specification.}:
+\[
+\mbox{\dots\parg{...}\aarg{\upshape{\em direction vector}\texttt{;}{\em start tension}|,|{\em end tension}}\parg{...}\aarg{...}\dots}
+\]
+
+ The |\Curve| macro does not (still) have facilities for cycling the
+ path, that is to close the path from the last specified node-direction
+ to the first specified node-direction; but, as already mentioned, if
+ the ending node of the last arc does not coincide with the starting
+ node of the first arc, a straight line is assumed to join such nodes;
+ this line does not get drawn, but with starred commands no lines are
+ drawn because only the interior is coloured.
+ The tangent direction need not be specified with a unit vector,
+ although only its direction is relevant; the scaling of the specified
+ direction vector to a unit vector is performed by the macro itself.
+ Therefore one cannot specify the fine tuning of the curve convexity as
+ it can be done with other programs or commands, as, for example, with
+ \MF\  or the |pgf/tikz| package and environment.
+ See figure~\ref{fig:curve} for an example.
+%
+% le equazioni parametriche del cuore, da stackexchange, sono
+%\def\x(#1){sin(#1)^3}
+%\def\y(#1){(13*cos(#1)-5*cos(2*#1)-2*cos(3*#1)-cos(4*#1))/16}
+% Varrebbe a penda di provarle con curve2e
+%
+	\begin{figure}[!htb]
+\begin{Esempio}[\small]%
+	\unitlength=8mm\relax
+	\begin{picture}(5,5)
+	\put(0,0){\framebox(5,5){}}\thicklines\roundcap
+	\Curve(2.5,0)<0.1,1>(5,3.5)<0,1>%
+	  (4,5)<-1,0>(2.5,3.5)<-0.1,-1.2>[-0.1,1.2]%
+	  (1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<0.1,-1>
+	\end{picture}
+\end{Esempio}
+	\caption{A heart shaped curve with cusps drawn with \texttt{\string\Curve}}
+	\label{fig:curve}
+
+\vspace*{2\baselineskip}
+
+\begin{Esempio}[\small]%
+	\unitlength=8mm\relax
+	\begin{picture}(5,5)
+	\put(0,0){\framebox(5,5){}}\thicklines\roundcap
+   \color{green}\relax
+	\Curve*(2.5,0)<0.1,1>(5,3.5)<0,1>%
+	  (4,5)<-1,0>(2.5,3.5)<-0.1,-1.2>[-0.1,1.2]%
+	  (1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<0.1,-1>
+	\end{picture}
+\end{Esempio}
+\caption{Coloring the inside of a closed path drawn with \texttt{\string\Curve*}}
+\label{fig:colored-curve}
+	\end{figure}
+
+ With the starred version of |\Curve|, instead of stroking the contour,
+ the macro fills up the contour with the selected current color,
+ figure~\ref{fig:colored-curve}.
+
+ Figure~\ref{fig:arcspline} shows a geometric construction that
+ contains the geometric elements and symbols used to determine the
+ parameters of a cubic spline required to draw a quarter circle. This
+ construction contains many of the commands described so far.
+
+\begin{figure}[p]
+\begin{minipage}{\linewidth}\small
+\begin{verbatim}
+\unitlength=0.007\textwidth
+\begin{picture}(100,90)(-50,-50)
+\put(-50,0){\vector(1,0){100}}\put(50,1){\makebox(0,0)[br]{$x$}}%
+\put(20,-1){\makebox(0,0)[t]{$s$}}%
+\put(0,0){\circle*{2}}\put(-1,-1){\makebox(0,0)[tr]{$M$}}%
+\legenda(12,-45){s=\overline{MP_2}=R\sin\theta}%
+\put(0,-50){\vector(0,1){90}}%
+\put(1,40){\makebox(0,0)[tl]{$y$}}%
+\put(0,-40){\circle*{2}}\put(1,-41){\makebox(0,0)[lt]{$C$}}%
+\segment(0,-40)(-40,0)\segment(0,-40)(40,0)%
+\put(-41,1){\makebox(0,0)[br]{$P_1$}}\put(-40,0){\circle*{2}}%
+\put(41,1){\makebox(0,0)[bl]{$P_2$}}\put(40,0){\circle*{2}}%
+\put(0,0){\linethickness{1pt}\Arc(0,-40)(40,0){90}}%
+\segment(-40,0)(-20,20)\put(-20,20){\circle*{2}}%
+\put(-20,21.5){\makebox(0,0)[b]{$C_1$}}%
+\segment(40,0)(20,20)\put(20,20){\circle*{2}}%
+\put(20,21.5){\makebox(0,0)[b]{$C_2$}}%
+\put(0,-40){\put(0,56.5685){\circle*{2}}%
+\put(1,58){\makebox(0,0)[bl]{$P$}}}%
+\VectorARC(0,-40)(15,-25){45}\put(10,-18){\makebox(0,0)[c]{$\theta$}}%
+\VectorARC(40,0)(20,0){-45}\put(19,5){\makebox(0,0)[r]{$\theta$}}%
+\VectorARC(-40,0)(-20,0){45}\put(-19,5){\makebox(0,0)[l]{$\theta$}}%
+\put(-20,-18){\makebox(0,0)[bl]{$R$}}%
+\put(-32,13){\makebox(0,0)[bl]{$K$}}%
+\put(32,13){\makebox(0,0)[br]{$K$}}%
+\end{picture}
+\end{verbatim}
+\end{minipage}\vspace{\stretch{1}}
+
+\begin{minipage}{\linewidth}\centering
+\unitlength=0.007\textwidth
+\begin{picture}(100,90)(-50,-50)
+\put(-50,0){\vector(1,0){100}}\put(50,1){\makebox(0,0)[br]{$x$}}%
+\put(20,-1){\makebox(0,0)[t]{$s$}}%
+\put(0,0){\circle*{2}}\put(-1,-1){\makebox(0,0)[tr]{$M$}}%
+\legenda(12,-45){s=\overline{MP_2}=R\sin\theta}%
+\put(0,-50){\vector(0,1){90}}%
+\put(1,40){\makebox(0,0)[tl]{$y$}}%
+\put(0,-40){\circle*{2}}\put(1,-41){\makebox(0,0)[lt]{$C$}}%
+\segment(0,-40)(-40,0)\segment(0,-40)(40,0)%
+\put(-41,1){\makebox(0,0)[br]{$P_1$}}\put(-40,0){\circle*{2}}%
+\put(41,1){\makebox(0,0)[bl]{$P_2$}}\put(40,0){\circle*{2}}%
+\put(0,0){\linethickness{1pt}\Arc(0,-40)(40,0){90}}%
+\segment(-40,0)(-20,20)\put(-20,20){\circle*{2}}%
+\put(-20,21.5){\makebox(0,0)[b]{$C_1$}}%
+\segment(40,0)(20,20)\put(20,20){\circle*{2}}%
+\put(20,21.5){\makebox(0,0)[b]{$C_2$}}%
+\put(0,-40){\put(0,56.5685){\circle*{2}}%
+\put(1,58){\makebox(0,0)[bl]{$P$}}}%
+\VectorARC(0,-40)(15,-25){45}\put(10,-18){\makebox(0,0)[c]{$\theta$}}%
+\VectorARC(40,0)(20,0){-45}\put(19,5){\makebox(0,0)[r]{$\theta$}}%
+\VectorARC(-40,0)(-20,0){45}\put(-19,5){\makebox(0,0)[l]{$\theta$}}%
+\put(-20,-18){\makebox(0,0)[bl]{$R$}}%
+\put(-32,13){\makebox(0,0)[bl]{$K$}}%
+\put(32,13){\makebox(0,0)[br]{$K$}}%
+\end{picture}
+\end{minipage}
+\caption{The code to display the nodes and control points for an arc to
+ be approximated with a cubic Bézier spline}
+\label{fig:arcspline}
+\end{figure}
+
+
+ To show what you can do with |\CurveBetween| see the code and result
+ shown in figure~\ref{fig:curva-due-punti}. Notice the effect of
+ changing the directions at both or a the end nodes of a single cubic
+ spline. The directions are conveniently expressed with unit vectors
+ described by polar coordinates.
+
+\begin{figure}\centering\unitlength=0.004\textwidth
+\begin{picture}(220,120)(-50,-20)
+\put(0,60){\Line(-50,0)(50,0)
+\CurveBetween-50,0and50,0WithDirs15:1and{-15:1}
+\CurveBetween-50,0and50,0WithDirs30:1and{-30:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-45:1}
+\CurveBetween-50,0and50,0WithDirs60:1and{-60:1}
+\CurveBetween-50,0and50,0WithDirs75:1and{-75:1}
+\CurveBetween-50,0and50,0WithDirs90:1and{-90:1}}
+\put(120,60){%
+\Line(-50,0)(50,0)
+\CurveBetween-50,0and50,0WithDirs15:1and{15:1}
+\CurveBetween-50,0and50,0WithDirs30:1and{30:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{45:1}
+\CurveBetween-50,0and50,0WithDirs60:1and{60:1}
+\CurveBetween-50,0and50,0WithDirs75:1and{75:1}
+\CurveBetween-50,0and50,0WithDirs90:1and{90:1}}
+\put(0,0){%
+\Line(-50,0)(50,0)
+\CurveBetween-50,0and50,0WithDirs45:1and{-15:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-30:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-45:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-60:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-75:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{-90:1}}
+\put(120,0){%
+\Line(-50,0)(50,0)
+\CurveBetween-50,0and50,0WithDirs45:1and{15:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{30:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{45:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{60:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{75:1}
+\CurveBetween-50,0and50,0WithDirs45:1and{90:1}}
+\end{picture}
+\caption{Curves between two points with different start and end slopes}\label{fig:curva-due-punti}
+\end{figure}
+
+ A little more complicated is the use of the |\CBezierBetween| macro,
+ figure~\ref{fig:Cbezier}. The directions are specified with unit
+ vectors in polar form; the control points are specified by adding their
+ distances from their neighbouring nodes; actually the right distance
+ is maintained to the value~1, while the left one increases from~4
+ to~10.
+ The black line corresponds to the standard |\CurveBetween| where the
+ default distance is computed to trace an arc of a circle and
+ is approximately~3.5. 
+
+\begin{figure}[!tb]
+\begin{minipage}[t]{0.52\textwidth}\small
+\begin{verbatim}
+\unitlength=0.1\textwidth
+\begin{picture}(10,3)
+\CurveBetween0,0and10,0WithDirs1,1and{1,-1}
+\color{red}%
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists4And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists6And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists8And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists10And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists12And{1}
+\end{picture}
+\end{verbatim}
+\end{minipage}
+\hfill
+\begin{minipage}{0.40\textwidth}\raggedleft
+\unitlength=0.1\textwidth
+\begin{picture}(10,3)(0,1.25)
+\CurveBetween0,0and10,0WithDirs1,1and{1,-1}
+\color{red}%
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists4And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists6And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists8And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists10And{1}
+\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists12And{1}
+\end{picture}
+\end{minipage}
+\caption{Comparison between similar arcs drawn with \cs{CurveBetween} (black)
+ and \cs{CbezierTo} (red)}
+\label{fig:Cbezier}
+\end{figure}
+
+ In figure~\ref{fig:tensions} the effect of tension specification is
+ shown. The red line corresponds to the default tension, since the
+ tension values are not specified. The black lines correspond to the
+ various values used in the various commands to the |\Curve| macro.
+ With a tension of zero, the spline is almost coincident with the
+ horizontal base line of the frame. Increasing the parameter value
+ to~4.5, the curved becomes taller and taller, until it wraps itself
+ displaying an evident loop. We would say that the value of ~2 is a
+ reasonable  maximum  and  increasing that value is just to
+ obtain special effects.
+
+\begin{figure}[!htb]\centering
+\begin{Esempio}[\setfontsize{8.5}]%
+\unitlength=0.01\textwidth
+\begin{picture}(70,70)
+\put(0,0){\color{blue}\framebox(70,70){}}
+\put(0,0){\color{red}%
+  \Curve(0,0)<1,1>(70,0)<1,-1>}
+\Curve(0,0)<1,1>(70,0)<1,-1;0,0>
+\Curve(0,0)<1,1>(70,0)<1,-1;0.2,0.2>
+\Curve(0,0)<1,1>(70,0)<1,-1;2,2>
+\Curve(0,0)<1,1>(70,0)<1,-1;4.5,4.5>
+\Curve(0,0)<1,1>(70,0)<1,-1;0,3>
+\Curve(0,0)<1,1>(70,0)<1,-1;3,0>
+\end{picture}
+\end{Esempio}
+\caption{The effects of tension factors}\label{fig:tensions}
+\end{figure}
+
+ Figure~\ref{fig:sinewave} displays two approximations of a sine wave;
+ Bézier splines can approximate transcendental curves, but the
+ approximation may be a poor one, depending on the approximated curve,
+ when few arcs are used to draw it. With arcs specified with more
+ complicated macros the approximation is better even with a lower number
+ of arcs.  With many arcs it is possible to approximate almost anything.
+ On the left side a modest approximation is obtained with just three
+ standard arcs obtained with |\Curve| and four node specifications;
+ on the right we have just two arcs created with |CBezierBetween| 
+ with tension specification and control point distances; this drawing 
+ is almost undistinguishable from a real sinusoid.
+
+\begin{figure}[!htb]
+\begin{minipage}{\linewidth}\small
+\begin{verbatim}
+\unitlength=0.01\textwidth
+\begin{picture}(100,50)(0,-25)
+\put(0,0){%
+\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
+\Pbox(45,0)[b]{x}[0]\Pbox(0,26)[tl]{y[0]}
+\Curve(0,0)<77:1>(10,20)<1,0;2,0.4>(30,-20)<1,0;0.4,0.4>(40,0)<77:1;0.4,2>
+}
+\put(55,0){%
+\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
+\Pbox(45,0)[b]{x}[0]\Pbox(0,26)[tl]{y}[0]
+\CbezierBetween0,0And20,0WithDirs77:1And-77:1UsingDists28And{28}
+\CbezierBetween20,0And40,0WithDirs-77:1And77:1UsingDists28And{28}}
+\end{picture}
+\end{verbatim}
+\end{minipage}\vspace{\baselineskip}
+
+\begin{minipage}{\linewidth}
+\unitlength=0.01\textwidth
+\begin{picture}(100,50)(0,-25)
+\put(0,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
+\Pbox(45,0)[b]{x}[0]\Pbox(0,26)[tl]{y}[0]
+\Curve(0,0)<77:1>(10,20)<1,0;2,0.4>(30,-20)<1,0;0.4,0.4>(40,0)<77:1;0.4,2>
+}
+\put(55,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
+\Pbox(45,0)[b]{x}[0]\Pbox(0,26)[tl]{y}[0]
+\CbezierBetween0,0And20,0WithDirs77:1And-77:1UsingDists28And{28}
+\CbezierBetween20,0And40,0WithDirs-77:1And77:1UsingDists28And{28}}
+\end{picture}
+\end{minipage}
+\caption{A sequence of arcs; the left figure has been drawn with the
+ \cs{Curve} command with a sequence of four couples of point-direction
+ arguments; the right figure has been drawn with two commands
+ \cs{CbezierBetween} that include also the specification of the control
+ points}
+\label{fig:sinewave}
+\end{figure}
+
+ In figure~\ref{fig:quadratic-arcs} some lines drawn are shown; they are
+ drawn  with quadratic splines by means of the |\Qurve| macro. In the
+ left there are some open and closed curves inscribed within a square.
+ On the right a “real" circle is compared to a quadratic spline circle;
+ the word “real” is emphasised because it actually is an approximation
+ with four quarter-circle cubic splines that, in spite of being drawn
+ with third degree parametric polynomials, approximate very well a real
+ circle; on the opposite the quadratic spline circle is clearly a poor
+ approximation even if the maximum radial error amounts just to about
+ 6\% of the radius.
+
+\begin{figure}[!htb]
+\begin{minipage}{\linewidth}
+\begin{Verbatim}[fontsize=\setfontsize{7.75}]
+\unitlength=0.0045\textwidth
+\begin{picture}(100,100)
+\put(0,0){\framebox(100,100){}}
+\put(50,50){%
+  \Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
+\color{green}
+  \Qurve*(0,-50)<0,1>(50,0)<1,0>[-1,0](0,50)<0,1>[0,-1](-50,0)<-1,0>[1,0](0,-50)<0,-1> 
+}
+\Qurve(0,0)<1,4>(50,50)<1,0>(100,100)<1,4>
+\put(5,50){\Qurve(0,0)<1,1.5>(22.5,20)<1,0>(45,0)<1,-1.5>%
+(67.5,-20)<1,0>(90,0)<1,1.5>}
+\Zbox(0,0)[tc]{0,0}\Zbox(100,0)[tc]{100,0}
+\Zbox(100,100)[bc]{100,100}\Zbox(0,100)[bc]{0,100}
+\Pall[2](0,0)\Pall[2](100,0)\Pall[2](100,100)\Pall[2](0,100)
+\end{picture}
+\hfill
+\begin{picture}(100,100)
+\put(0,0){\framebox(100,100){}}
+\put(50,50){%
+\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
+\Curve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
+\Zbox(50,50)[t]{O}\Pall[2](50,50)\put(50,50){\Vector(45:50)}\Zbox(67,70)[tl]{R}
+\end{picture}
+\end{Verbatim}
+\end{minipage}\vspace{2\baselineskip}
+
+\begin{minipage}{\linewidth}
+\unitlength=0.0045\textwidth
+\begin{picture}(100,100)
+\put(0,0){\framebox(100,100){}}
+\put(50,50){\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
+\put(50,50){\color{green}%
+\Qurve*(0,-50)<0,1>(50,0)<1,0>[-1,0](0,50)<0,1>[0,-1](-50,0)<-1,0>[1,0](0,-50)<0,-1>}
+\Qurve(0,0)<1,4>(50,50)<1,0>(100,100)<1,4>
+\put(5,50){\Qurve(0,0)<1,1.5>(22.5,20)<1,0>(45,0)<1,-1.5>(67.5,-20)<1,0>(90,0)<1,1.5>}
+\Zbox(0,0)[tc]{0,0}\Zbox(100,0)[tc]{100,0}
+\Zbox(100,100)[bc]{100,100}\Zbox(0,100)[bc]{0,100}
+\Pall[2](0,0)\Pall[2](100,0)\Pall[2](100,100)\Pall[2](0,100)
+\end{picture}
+\hfill
+\begin{picture}(100,100)
+\put(0,0){\framebox(100,100){}}
+\put(50,50){\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
+\Curve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
+\Zbox(50,50)[t]{O}\Pall[2](50,50)\put(50,50){\Vector(45:50)}\Zbox(67,70)[tl]{R}
+\end{picture}
+\end{minipage}
+
+\caption{\rule{0pt}{4ex}Several graphs drawn with quadratic Bézier
+ splines. On the right a quadratic spline circle is compared with a
+ cubic line circle.}
+\label{fig:quadratic-arcs}
+\end{figure}
+
+ Notice that the previous version of \pack{curve2e} contained an error and
+ would color the outside of the green four-pointed star. 
+ The |curve2e-v161|, attached to this bundle, has been corrected;
+ therefore it is not actually identical to the previous version,
+ although the latter one performed correctly for everything else except
+ for color-filled quadratic paths.
+ %%
+ \item The new version of |\multiput| is backwards compatibile with
+ the original version contained in the \LaTeX\ kernel. The new macro
+ adds the handling of the coordinate increments from one position to
+ the next for the \meta{object} to include in the drawing.
+
+ On page~\pageref{pag:multiput} we show the code for the figure shown
+ there. The red grid is nothing new, except that it displays the
+ traditional |\multiput| used in this code, shown in a previous example,
+ produces exactly the same result. But the for “graphs” on the grid, it
+ display an alignment of black dots along the diagonal of the grid
+ (again traditional |\multiput| rendered with the new version);
+ a number of blue dots along a parabola; another number of magenta
+ dots alined along a half sine wave; a number of little green squares
+ aligned along a $-15~\circ$ line starting from the center of the grid;
+ notice the polar values that are used as polar relative coordinate
+ increments.
+
+\noindent\begin{figure}[!htb]
+\begin{minipage}{0.45\linewidth}
+\begin{Verbatim}[fontsize=\setfontsize{8}]
+\unitlength=0.01\linewidth
+\begin{picture}(100,100)
+\GraphGrid(100,100)
+\multiput(0,0)(10,10){11}{\circle*{2}}
+\color{blue!70!white}
+\multiput(0,0)(10,0){11}{\circle*{2}}%
+  [\GetCoord(\R)\X\Y
+  \edef\X{\fpeval{\X+10}}
+  \edef\Y{\fpeval{(\X/10)**2}}
+  \CopyVect\X,\Y to\R]
+\color{magenta}
+\multiput(0,0)(10,1){11}{\circle*{2}}%
+  [\GetCoord(\R)\X\Y
+   \edef\X{\fpeval{\X+10}}
+   \edef\Y{\fpeval{sind(\X*1.8)*100}}
+   \CopyVect\X\Y to\R]
+\color{green!80!black}
+\multiput(50,50)(-15:5){11}}{%
+\polygon*(-1,-1)(1,-1)(1,1)(-1,1)}
+\end{picture}
+\end{Verbatim}
+\end{minipage}
+\hfill
+\begin{minipage}{0.45\linewidth}
+\unitlength=0.01\linewidth
+\begin{picture}(100,100)
+\GraphGrid(100,100)
+\multiput(0,0)(10,10){11}{\circle*{2}}
+\color{blue!70!white}
+\multiput(0,0)(10,0){11}{\circle*{2}}%
+  [\GetCoord(\R)\X\Y
+  \edef\X{\fpeval{\X+10}}
+  \edef\Y{\fpeval{(\X/10)**2}}
+  \CopyVect\X,\Y to\R]
+\color{magenta}
+\multiput(0,0)(10,1){11}{\circle*{2}}%
+  [\GetCoord(\R)\X\Y
+   \edef\X{\fpeval{\X+10}}
+   \edef\Y{\fpeval{sind(\X*1.8)*100}}
+   \CopyVect\X,\Y to\R]
+\color{green!60!black}
+\multiput(50,50)(-15:5){11}{\polygon*(-1,-1)(1,-1)(1,1)(-1,1)}
+\end{picture}
+\end{minipage}
+\caption{Some examples of the \meta{handler} optional argument}%\label{pag:multiput}
+\end{figure}
+
+ A new command |\xmultiput| (not available with the previous versions
+ of \pack{curve2e}) extended with respect to the original |\multiput| is
+ defined by using some L3 functions; in particular the cycling
+ counter is accessible to the \LaTeX\ commands and  it is stepped
+ forward from~1 to the value specified in the proper command argument
+ (in the original command it starts from that value and is stepped down
+ to zero). See the figure on page~\ref{pag:orologio} to inspect its
+ usage. It is important to notice that if the command|\rotatebox|
+ has to be used, as in the example of figure~\ref{pag:orologio}, the
+ package |graphics| should be also loaded, because \pack{curve2e} does not
+ do it.
+
+\begin{figure}[!htb]
+\begin{minipage}{0.45\textwidth}\setfontsize{9.5}%
+\begin{verbatim}
+\unitlength=0.0095\linewidth
+\begin{picture}(100,100)
+\GraphGrid(100,100)
+\put(50,50){\thicklines\circle{100}}
+\xmultiput[50,50](60:40)(-30:1){12}%
+  {\makebox(0,0){\circle*{2}}}%
+  [\MultVect\R by\D to\R]% 
+\xmultiput[50,50](60:46)(-30:1){12}%
+  {\ArgOfVect\R to\Ang
+  \rotatebox{\fpeval{\Ang-90}}%
+  {\makebox(0,0)[b]{\Roman{multicnt}}}}%
+  [\Multvect{\R}{\D}\R]
+\end{picture}
+\end{verbatim}
+\end{minipage}
+\hfill
+\begin{minipage}{0.40\textwidth}\raggedleft
+\unitlength=0.0095\linewidth
+\begin{picture}(100,100)
+\GraphGrid(100,100)
+\put(50,50){\thicklines\circle{100}}
+\xmultiput[50,50](60:40)(-30:1){12}%
+  {\makebox(0,0){\circle*{2}}}[\MultVect\R by\D to\R]% 
+\xmultiput[50,50](60:43)(-30:1){12}%
+  {\ArgOfVect\R to\Ang\rotatebox{\fpeval{\Ang-90}}%
+    {\makebox(0,0)[b]{\Roman{multicnt}}}}%
+      [\Multvect{\R}{\D}\R]
+\end{picture}
+\end{minipage}
+\caption{Usage example of the \texttt{\string\xmultiput} command}
+\label{pag:orologio}\hfill
+\end{figure}
+ 
+ \item This implementation of \pack{curve2e} includes an extension
+ to package |xfp|, in the sense that adds two more L3 commands:
+ |\fptest| and |\fpdowhile| to the two already contained and
+ documented  in the latter package. The syntax of such new commands
+ is the following
+  \begin{flushleft}\obeylines
+  \cs{fptext}\marg{test}\marg{true}\marg{false}
+  and
+  \cs{fpdowhile}\meta{test}\meta{operations to be repeated}
+  \end{flushleft}
+ The name of |\fptest| requires two further arguments that contain
+ what to do if the \meta{test} is true, and what  to do if the
+ \meta{test} is false.
+ The \meta{test} is a logical expressions that connects math relation
+ expressions, even floating pint ones, by means of \emph{logical
+ operators}; such operators are \verb+||+, \verb|&&|, and \verb|!|,
+ respectively for OR, AND, NOT; for example \verb|!<| means “not lower
+ than” which is equivalent to “equal or grater than”. The logical
+ expression is parsed left to right and normal parentheses may be
+ used to alter this sequence. The logical operators work also
+ between logical variables, therefore the \meta{test} may contain
+ an interesting mixture of relation and logical operators.
+
+ Before using |\fpdowhile| the arguments the \meta{test} depends
+ from must be set so that the test is true; during the execution
+ of the \meta{operations to be repeated} there must be some setting
+ that eventually renders the \meta{test} false. The user should
+ pay attention to set the elements that \meta{test} depends from,
+ because the risk is to enter an infinite loop and end up with some
+ error message stating that the working memory of the program is full.
+ 
+ Nevertheless such commands are very useful also for drawing graphics;
+ the |xmultiput| already makes use of such L3~functions.
+
+ As an example of use, we show how to plot a mathematical function
+ expressed in parametric form:
+\[\begin{cases}
+x = f_1(t)\\
+y = f_2(t)
+\end{cases}\]
+ The plot is executed with a piecewise linear approximation of the
+ curve; if the $t$ steps are sufficiently small, the plot turns out to
+ be very nice; here we show an example where we plot a Lissajous curve
+ with two sinusoids of different period.
+
+ We start by defining the Lissajous function with arguments
+ to specify the parameter $t$, the sinusoid amplitudes $A_1, A_2$,
+ the respective “frequencies", by means of integer multiples of
+ a unit pulsation, $N_1, N_2$, and the initial phases
+ $\phi_1, \phi_2$ of such sinusoids. It is better to keep
+ apart the input of the curve coefficients from the actual curve
+ argument/parameter and output point coordinates:
+\begin{verbatim}
+\def\LissajousCoefs#1,#2,#3,#4,#5,#6!{%
+\edef\LAu{#1}\edef\LNu{#2}\edef\LFu{#3}%
+\edef\LAd{#4}\edef\LNd{#5}\edef\LFd{#6}}
+
+\def\LissajousCode#1#2{%
+\edef\X{\fpeval{\LAu*cosd(\LNu*#1+\LFu)}}%
+\edef\Y{\fpeval{\LAd*cosd(\LNd*#1+\LFd)}}%
+\CopyVect\X,\Y to#2\ignorespaces}
+\end{verbatim}
+ As it is shown, the coefficients are specified as a comma separated
+ list; the  \verb|!| list terminator is taken care by the actual
+ drawing command.
+
+ Then the curve drawing command requires the coefficient specification
+ only the first time it is used; some messages\footnote{Here it would
+ be better to have available a “Macro Error” message; such a macro
+ is not available, but it would be possible to define it by means
+ of the \cs{GenericError} macro provided by the \LaTeX2e\ kernel.
+ Here we skip this definition in order to avoid overloading this
+ documentation with such details.} are output if the coefficients
+ have been “forgotten”.
+\begin{verbatim}
+\NewDocumentCommand\Lissajous{m o m}{%
+\IfValueTF{#2}{\LissajousCoefs#2!\relax
+\LissajousCode{#1}{#3}}%
+{\ifcsname LAu\endcsname
+\LissajousCode{#1}{#3}%
+\else\PackageError{curve2e}%
+  {This Lissajous' curve coefficients\MessageBreak
+   are missing}{Nothing done}\fi}%
+\ignorespaces}
+\end{verbatim}
+
+ The syntax is the following:
+\begin{flushleft}\obeylines
+\cs{Lissajous}\marg{t}\Oarg{\meta{$A_1$},\meta{$N_1$},\meta{$\phi_1$},\meta{$A_2$},\meta{$N_2$},\meta{$\phi_2$}}\meta{$P_{\mathrm{out}}$}
+\end{flushleft}
+ where \meta{$P_{\mathrm{out}}$} is a macro that gets
+ defined with the cartesian  coordinates of the computed output 
+ point.
+
+ After this definition the diagram is plotted in
+ figure~\ref{fig:lissajous}.
+%
+\begin{figure}[!htb]\centering
+\begin{Esempio}[\setfontsize{8.5}](0.55)
+\unitlength=0.01\linewidth
+\begin{picture}(100,100)(-50,-50)
+\GraphGrid(-50,-50)(100,100)
+\VECTOR(-50,0)(50,0)\Pbox(50,0)[tr]{x}[0]
+\VECTOR(0,-50)(0,50)\Pbox(0,50)[tr]{y}[0]
+\Pbox(0,0)[tr]{O}[2]
+\countdef\I=2560 \I=0
+%
+\Lissajous\I[40,2,90,40,3,0]\Pout 
+{\moveto(\Pout)\relax
+\fpdowhile{\I !> 360}{%
+\Lissajous\I\Pout
+\lineto(\Pout)\advance\I by1\relax}%
+\strokepath}
+\end{picture}
+\end{Esempio}
+\caption{A Lissajous diagram}\label{fig:lissajous}
+\end{figure}
+
+ For the independent variable $t$, the parameter of the Lissajous
+ parametric equations, it is better to work with degrees instead
+ of radians, and with integer numbers, so that the whole range
+ from $0^\circ$ to $369^\circ$ is certainly spanned. Notice the
+ braces that include the code for the Lissajous diagram; they may
+ be useful to render that group suitable to be |\put| somewhere
+ else than with its center in the origin of the canvas axes,
+ and/or to be used as the second argument of a 
+ \cs{rotatebox}\marg{angle} command so as to rotate the whole
+ diagram.
+
+ \end{enumerate}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \section{Remark}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ In spite of the relative simplicity of the macros contained in this
+ package, the described macros, as well as the original ones included in
+ the \pack{pict2e} package, they allow to produce fine drawings that were
+ unconceivable with the original \LaTeX\ picture environment. Leslie
+ Lamport himself announced an extension to his environment when \LaTeXe\
+ was first released in 1994; in the |latexnews| news-letter of December
+ 2003, the first implementation of Lamport's extension was announced;
+ the first version of this package \pack{curve2e} was issued in 2006.
+ It was time to have a  better drawing environment; this package
+ is a simple attempt to follow the initial path while further extending the
+ drawing facilities.
+
+ There are other packages in the \textsc{ctan} archives that deal with
+ tracing curves of various kinds. \pack{PSTricks} and \pack{pgf/tikz} are 
+ the most powerful ones. And they are becoming the standard for programmed 
+ drawing.
+ Their documentation is huge and the multitude of extra modules to perform 
+ special tasks is countless. Therefore they are difficult to use; when the 
+ user gets used to their particular syntax and got sufficient familiarity 
+ with several modules, s/he can uses these bundles very comfortably. 
+ 
+ This difficulty in getting a TikZ or PS expert is why I think a simpler 
+ drawing machinery should be appreciated; I admit it: I like the 
+ \env{picture} environment; and I like to deal with simple codes so as to 
+ create my own macros.
+ 
+ But there is also \pack{curves} that is intended to draw almost
+ anything by using little dots or other symbols partially superimposed
+ to one another. It uses only quadratic Bézier curves and the curve
+ tracing is eased by specifying only the curve nodes, without specifying
+ the control nodes; with a suitable option to the package call, it is
+ possible to reduce the memory usage by using short straight segments
+ drawn with the PostScript facilities offered by the |dvips| driver.
+
+ Another package, \pack{ebezier} performs about the same as \pack{curve2e} 
+ but draws its Bézier curves by using little dots partially superimposed to
+ one another. The documentation is quite interesting since it
+ explains very clearly what exactly are the Bézier splines. Apparently
+ \pack{ebezier} should be used only for DVI output without recourse to
+ PostScript or PDF machinery.
+
+ The \pack{picture} package extends the performance of the \env{picture}
+ environment (extended with \pack{pict2e}) by accepting coordinates
+ and lengths in real absolute dimensions, not only as multiples of
+ |\unitlength|; it provides commands to extend that functionality to
+ other packages. In certain circumstances it may be very useful.
+
+ Package \pack{xpicture} builds over the \env{picture} \LaTeX\ environment
+ so as to allow to draw the usual curves that are part of an
+ introductory analytic geometry course; lines, circles, parabolas,
+ ellipses, hyperbolas, and polynomials; the syntax is rather comfortable, 
+ although it is not a simple extension of the \env{picture} own syntax;
+ for all these curves it uses the quadratic Bézier splines.
+ 
+ Package \pack{hobby} extends the cubic Bézier spline handling with the
+ algorithms John Hobby created for \MF\ and \MP. But by now this package
+ interfaces very well with |tikz|; it has not (yet) been adapted to the
+ common \env{picture} environment extended with \pack{pict2e}, and,
+ why not, with \pack{curve2e}.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+ \section{Acknowledgements}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+ I wish to express my deepest thanks to Michel Goosens who spotted some
+ errors and very kindly submitted them to me so that I was able to
+ correct them.
+
+ Josef Tkadlec and the author collaborated extensively in order to implement
+ a better real long division so as to get correctly the quotient
+ fractional part and to avoid as much as possible any numeric overflow;
+ many Josef's ideas are incorporated in the macro that was implemented
+ in the previous version of this package, although the macro used by
+ Josef was slightly  different. Both versions aim/aimed at a better
+ accuracy and at widening the operand ranges. In this version of 
+ \pack{curve2e} we abandoned our long division macro, and substituted it 
+ with the floating point division provided by the |xfp| package.
+
+ Daniele Degiorgi spotted a fault in the kernel definition of
+ |\linethickness| that heavily influenced also \pack{curve2e}; see in
+ the code documentation \file{curve2e.pdf} file.
+
+ Thanks also to Jin-Hwan Cho and Juho Lee who suggested a small but
+ crucial modification in order to have \pack{curve2e} work smoothly
+ also with XeTeX (XeLaTeX). Actually if \pack{pict2e}, version 0.2x or 
+ later dated 2009/08/05  or later, is being used, such modification is not
+ necessary any more, but it is true that it becomes imperative when legacy
+ versions were used.
+
+
+\end{document}
+
+
+
diff --git a/Master/texmf-dist/doc/latex/curve2e/curve2e.pdf b/Master/texmf-dist/doc/latex/curve2e/curve2e.pdf
index cd2c9f9c77c..d204e13d9aa 100644
--- a/Master/texmf-dist/doc/latex/curve2e/curve2e.pdf
+++ b/Master/texmf-dist/doc/latex/curve2e/curve2e.pdf
diff --git a/Master/texmf-dist/source/latex/curve2e/curve2e.dtx b/Master/texmf-dist/source/latex/curve2e/curve2e.dtx
index 2bf4c5af2d0..266ca29f250 100644
--- a/Master/texmf-dist/source/latex/curve2e/curve2e.dtx
+++ b/Master/texmf-dist/source/latex/curve2e/curve2e.dtx
@@ -13,12 +13,11 @@
 
 \postamble
 
-
 Distributable under the LaTeX Project Public License,
 version 1.3c or higher (your choice). The latest version of
 this license is at: http://www.latex-project.org/lppl.txt
 
-This work is "author-maintained"
+This work is "maintained"
 
 This work consists of file curve2e.dtx, and the derived files 
 curve2e.sty and curve2e.pdf, plus the auxiliary derived files 
@@ -47,7 +46,7 @@ README.txt and curve2e-v161.sty.
 %<+package>\ProvidesPackage{curve2e}%
 %<+readme>File README.txt for package curve2e
 %<*package|readme>
-        [2020-01-05 v.2.0.8 Extension package for pict2e]
+        [2020-01-18 v.2.2.0 Extension package for pict2e]
 %</package|readme>
 %<*driver>
 \documentclass{ltxdoc}\errorcontextlines=9
@@ -55,11 +54,11 @@ README.txt and curve2e-v161.sty.
 \usepackage[utf8]{inputenc}
 \usepackage{lmodern,textcomp}
 \usepackage{mflogo}
-\usepackage{multicol,amsmath,fancyvrb,graphics,trace}
+\usepackage{multicol,amsmath,fancyvrb,graphics,verbatim,trace}
 \usepackage{xcolor,curve2e}
 \GetFileInfo{curve2e.dtx}
 \title{The extension package \textsf{curve2e}}
-\author{Claudio Beccari\thanks{E-mail: \texttt{claudio dot beccari at gmai dot com}}}
+\author{Claudio Beccari\thanks{E-mail: \texttt{claudio dot beccari at gmail dot com}}}
 \date{Version \fileversion~--~Last revised \filedate.}
 \providecommand*\diff{\mathop{}\!\mathrm{d}}
 \renewcommand\meta[1]{{\normalfont\textlangle\textit{#1}\textrangle}}
@@ -79,10 +78,41 @@ README.txt and curve2e-v161.sty.
 \providecommand\Parg{}
 \renewcommand\Parg[1]{\texttt{(#1)}}
 
+\providecommand\Pbox{}
+\RenewDocumentCommand\Pbox{D(){0,0} O{cc} m O{0.5ex}}{%
+\put(#1){%
+\dimendef\Dim=2566\relax
+\settowidth\Dim{#2}%
+\edef\Rapp{\fpeval{\Dim/{1ex}}}%
+\fptest{\Rapp > 1.5}{\fboxsep=0.5ex}{\fboxsep=0.75ex}%
+\fboxrule=0pt
+\fptest{#4 = 0sp}{\makebox(0,0)[#2]{\fbox{$\relax#3\relax$}}}%
+{\edef\Diam{\fpeval{#4/\unitlength}}%
+\makebox(0,0){\circle*{\Diam}}%
+\makebox(0,0)[#2]{\fbox{$\relax\mathsf#3\relax$}}}%
+}\ignorespaces}
+
+\def\LissajousCoefs#1,#2,#3,#4,#5,#6!{%
+\edef\LAu{#1}\edef\LNu{#2}\edef\LFu{#3}%
+\edef\LAd{#4}\edef\LNd{#5}\edef\LFd{#6}}
+
+\def\LissajousCode#1#2{%
+\edef\X{\fpeval{\LAu*cosd(\LNu*#1+\LFu)}}%
+\edef\Y{\fpeval{\LAd*cosd(\LNd*#1+\LFd)}}%
+\CopyVect\X,\Y to#2\ignorespaces}
+
+\NewDocumentCommand\Lissajous{m o m}{%
+\IfValueTF{#2}{\LissajousCoefs#2!\relax
+\LissajousCode{#1}{#3}}%
+{\ifcsname LAu\endcsname
+\LissajousCode{#1}{#3}%
+\else\PackageError{Lissajous}%
+  {I parametri di questa curva di Lissajous\MessageBreak
+   Non sono mai stati definiti}{Non faccio nulla}\fi}%
+\ignorespaces}
+
 \makeatletter
 
-%\newcommand*\Pall[1][1.5]{\def\circdiam{#1}\@Pall}
-%   \def\@Pall(#1){\put(#1){\circle*{\circdiam}}}
 \NewDocumentCommand\Pall{O{1.5} R(){0,0}}{\put(#2){\circle*{#1}}}
 
 \def\legenda(#1)#2{\put(#1){\setbox3333\hbox{$#2$}%
@@ -98,8 +128,47 @@ README.txt and curve2e-v161.sty.
 \DeclareRobustCommand\setfontsize[2][1.2]{%
 \linespread{#1}\fontsize{#2}{#2}\selectfont}
 
+\newwrite\example@out
+\ProvideDocumentEnvironment{Esempio}{ O{\footnotesize} D(){0.50}}
+% All definitions and assignments are local
+% #1 := Lates font size command or  \setfontsize{<size>}
+% %2 := \textwidth percentage for the code box; the complement, less the
+%       column gap for the result dedicata al codice
+% Syntax: \begin{Esempio}[<>size command](<code box percentage width>)
+%
+{\par\addvspace{3.0ex plus 0.8ex minus 0.5ex}\vskip -\parskip
+%\def\Corpo{#1}
+\dimendef\Wboxu=2570 \dimendef\Wboxd=2572
+\Wboxu=#2\textwidth\relax
+\Wboxd=\dimexpr\linewidth-\columnsep-\Wboxu\relax
+\begingroup
+\@bsphack
+\immediate\openout\example@out\jobname-temp.tex
+\let\do\@makeother\dospecials\catcode`\^^M\active
+\def\verbatim@processline{%
+  \immediate\write\example@out{\the\verbatim@line}}%
+\verbatim@start\relax}%
+{\immediate\closeout\example@out\@esphack\endgroup
+\begin{lrbox}{0}%
+\begin{minipage}{\textwidth}%
+\begin{minipage}{\Wboxu}%
+#1\relax
+\verbatiminput{\jobname-temp.tex}
+\end{minipage}%
+\hfill
+\begin{minipage}{\Wboxd}\raggedleft
+\input{\jobname-temp}%
+\end{minipage}
+\end{minipage}%
+\end{lrbox}%
+
+\medskip
+\noindent\makebox[\textwidth]{\box0}%
+\par%\addvspace{3.0ex plus 0.8ex minus 0.5ex}\vskip -\parskip
+}
+
 
-\begin{document}
+\begin{document}\errorcontextlines=100
 \maketitle
 \columnseprule=0.4pt
 \begin{multicols}{2}
@@ -110,7 +179,7 @@ README.txt and curve2e-v161.sty.
 %</driver>
 % \fi
 %
-% \CheckSum{5600}
+% \CheckSum{5578}
 % \begin{abstract}
 % This file documents the |curve2e| extension package to  the |pict2e|
 % bundle implementation; the latter was described by Lamport
@@ -130,25 +199,9 @@ README.txt and curve2e-v161.sty.
 % of contributors.
 % \end{abstract}
 %
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%\section{The configuration file}
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% This package |curve2e| is distributed with a |ltxdoc.cfg| configuration
-% file that contains, besides the preamble and the postamble comment
-% lines, the following line of code:
-%\begin{verbatim}
-%\AtBeginDocument{\OnlyDescription}
-%\end{verbatim}
-%
-% If you want to type the whole documentation, comment out that code line
-% in the |ltxdoc.cfg| file. This is the only modification allowed by the
-% LPPL licence that does not require to change the file name.
-%
-% For your information, the initial part is about 20~pages long; the
-% whole documentation is about 80~pages long.
 %
 %^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \section{Package \texttt{pict2e} and this extension \texttt{curve2e}}
+% \section{Introduction}
 %^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 %
 % Package \texttt{pict2e} was announced in issue 15 of \texttt{latexnews}
@@ -359,7 +412,7 @@ README.txt and curve2e-v161.sty.
 % |\lineto|, |\curveto|, |\closepath|, |\fillpath|, and |\strokepath|;
 % of course these macros can be used by the end user, and sometimes they
 % perform better than the macros defined in this package, because the
-% user has a better control on the position of the Bézier splines
+% user has a better control on the position of eack Bézier-spline
 % control points, while here the control points are sort of rigid. It
 % would be very useful to resort to the |hobby| package, but its macros
 % are compatible with those of the |tikz| and |pgf| packages, not with
@@ -390,8 +443,8 @@ README.txt and curve2e-v161.sty.
 % \TeX\ and \LaTeX\ programmers, this version could become the start for
 % a real extension of the |pict2e| package or even become a part of
 % it. Actually some macros have already been included in the |pict2e|
-% package. The |\Curve| algorithm, as I said before, might be redefined
-% so as to use the macros  introduced in the |hobby| package, that
+% package. The |\Curve| algorithm, as said before, might be redefined
+% so as to use the macros  introduced by the |hobby| package, that
 % implements for the |tikz| and |pgf| packages the same functionalities
 % that John Hobby implemented for the \MF\ and \MP\ programs. 
 %
@@ -400,1089 +453,6 @@ README.txt and curve2e-v161.sty.
 % \texttt{pict2e}; they are the only ones who can decide whether or not
 % to incorporate new macros in their package.
 %
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \section{Summary and examples of new commands}
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% This package \texttt{curve2e} extends the power of \texttt{pict2e} with
-% the following modifications and the following new commands.
-% \begin{enumerate}
-% \item This package |curve2e| calls directly the \LaTeX\ packages
-% |color| and |pict2e| to which it passes any possible option that the
-% latter can receive; actually the only options that make sense for
-% |pict2e| are those concerning the arrow tips, either \LaTeX\ or
-% PostScript styled, because it is assumed that if you use this package
-% you are not interested in using the original \LaTeX\ commands. See the
-% |pict2e| documentation in order to see the correct options |pict2e|
-% can receive. If the user wants to use the |xcolor| package, it has to
-% load this one before |curve2e|.
-%^^A
-% \item The user is offered new commands in order to control the line
-% terminators and the line joins; specifically:
-% \begin{itemize}
-% \item |\roundcap|: the line is terminated with a semicircle;
-% \item |\squarecap|: the line is terminated with a half square;
-% \item |\roundjoin|: two lines are joined with a rounded join;
-% \item |\beveljoin|: two lines are joined with a bevel join;
-% \item |\miterjoin|: two lines are joined with a miter join.
-% \end{itemize}
-% All the above commands should respect the intended range; but since
-% they act at the PostScript or PDF level, not at \TeX\ level, it might
-% be necessary to issue the necessary command in order to restore the
-% previous terminator or join.
-%^^A
-% \item The commands |\linethickness|, |\thicklines|, |\thinlines|
-% together with |\defaultlinethickness| always redefine the internal
-% |\@wholewidth| and |\@halfwidth| so that the latter always refer to a
-% full width and to a half of it in this way: if you issue the command
-% |\defaultlinewidth{2pt}| all thin lines will be drawn with a thickness
-% of 1\,pt while, if a drawing command directly refers to the internal
-% value |\@wholewidth|, its line will be drawn with a thickness of 2\,pt.
-% If one issues the declaration |\thinlines| all lines will be drawn with
-% a  1\,pt width, but if a command refers to the internal value
-% |\@halfwidth| the line will be drawn with a thickness of 0.5\,pt. The
-% command |\linethickness| redefines the above internals but does not
-% change the default width value; all these width specifications apply to
-% all lines, straight ones, curved ones, circles, ovals, vectors, dashed,
-% et cetera. It's better to recall that |\thinlines| and |\thicklines|
-% are declarations that do not take arguments; on the opposite the other
-% two commands follow the standard syntax:
-% \begin{flushleft}
-% |\linethickness|\marg{dimensioned value}\\
-% |\defaultlinewidth|\marg{dimensioned value}
-% \end{flushleft}
-% where \meta{dimensioned value} means a length specification complete of
-% its units, or a dimensional expression.
-%^^A
-% \item Straight lines and vectors are redefined in such a way that
-% fractional slope coefficients may be specified; the zero length line
-% does not produce errors and is ignored; the zero length vectors draw
-% only the arrow tips. 
-%^^A
-% \item New line and vector macros are defined that avoid the necessity
-% of specifying the horizontal component; |\put(3,4){\LIne(25,15)}|
-% specifies a segment that starts at point $(3,4)$ and goes to point
-% $(3+25,4+15)$; the command |\segment(3,4)(28,19)| achieves the same
-% result without the need of using command |\put|.
-%
-% The same applies to the vector commands |\Vector| and |\VECTOR| and
-% |\VVECTOR|; the latter command behaves as |\VECTOR| but draws a vector
-% with arrow tips at both ends; furthermore this command is available
-% only with this new release of the |curve2e| package. 
-% Experience has shown that the commands intended to join two specified
-% points are particularly useful.
-%	\begin{figure}
-%	\begin{minipage}{.48\textwidth}
-%	\begin{verbatim}
-%	\unitlength=.5mm
-%	\begin{picture}(60,20)
-%	\GraphGrid(80,20)
-%	\put(0,0){\vector(1.5,2.3){10}}
-%	\put(20,0){\Vector(10,15.33333)}
-%	\VECTOR(40,0)(50,15.33333)
-%	\ifdefined\VVECTOR \VVECTOR(60,0)(80,10)\fi
-%	\end{picture}
-%	\end{verbatim}
-%	\end{minipage}
-%	\hfill
-%	\begin{minipage}{.48\textwidth}\centering
-%	\unitlength=.5mm
-%	\begin{picture}(60,20)
-%	\GraphGrid(80,20)
-%	\put(0,0){\vector(1.5,2.3){10}}
-%	\put(20,0){\Vector(10,15.33333)}
-%	\VECTOR(40,0)(50,15.33333)
-%	\ifdefined\VVECTOR \VVECTOR(60,0)(80,10)\fi
-%	\end{picture}
-%	\end{minipage}
-%  \caption{Three (displaced) identical vectors obtained with the three
-%           vector macros\ifdefined\VVECTOR; a double tipped vector is also shown\fi.}\label{fig:vectors}
-%	\end{figure}
-%^^A
-% \item The |\polyline| command has been introduced: it accepts an
-% unlimited list of  point coordinates enclosed within round parentheses;
-% the command draws a sequence of connected segments that join in order the
-% specified points; the syntax is:
-%	\begin{flushleft}
-%\cs{polyline}\oarg{optional join style}\parg{$P_1$}\parg{$P_2$}\texttt{...}\parg{$P_n$}
-%	\end{flushleft}
-% See figure~\ref{fig:polyline} where a regular pentagon is drawn; usage
-% of polar coordinates is also shown; please notice how relative polar
-% coordinates act in this figure.
-%
-%	\begin{figure}[!ht]
-%	\begin{minipage}{.48\linewidth}
-%	\begin{verbatim}
-%	\unitlength=.5mm
-%	\begin{picture}(40,32)(-20,-20)
-%	\polyline(90:20)(162:20)(234:20)(306:20)(378:20)(90:20)
-%	\end{picture}
-%	\end{verbatim}
-%	\end{minipage}
-%   \hfill
-%	\begin{minipage}{.48\linewidth}\raggedleft
-%   \unitlength=.5mm
-%	\begin{picture}(40,32)(-20,-20)
-%	\polyline(90:20)(162:20)(234:20)(306:20)(378:20)(90:20)
-%	\end{picture}\hspace*{2em}
-%	\end{minipage}
-%	\caption{Polygonal line obtained by means of the \texttt{\string\polyline}
-%   command; vertex coordinates are in polar form.}
-%	\label{fig:polyline}
-%	\end{figure}
-%
-% Examples of using polar and cartesian coordinates are shown in 
-% figure~\ref{fig:polar}.
-%
-%\begin{figure}[htb]\unitlength=0.01\textwidth
-%\begin{minipage}{0.55\textwidth}
-%\begin{verbatim}
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Zbox(40,0)[l]{40,0}[1]
-%\Zbox(90:30)[bc]{90{:}30}[1]
-%\Zbox(60:30)[bc]{60{:}30}[1]
-%\Zbox(30,30)[bc]{30,30}[1]
-%\multiput(0,0)(30:10){5}%
-%   {\makebox(0,0){\rule{1.5mm}{1.5mm}}}
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.4\textwidth}
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Zbox(40,0)[l]{40,0}[1]
-%\Zbox(90:30)[bc]{90{:}30}[1]
-%\Zbox(60:30)[bc]{60{:}30}[1]
-%\Zbox(30,30)[bc]{30,30}[1]
-%\multiput(0,0)(30:10){5}{\makebox(0,0){\rule{1.5mm}{1.5mm}}}
-%\end{picture}
-%\end{minipage}
-%\caption[Use of cartesian and absolute polar coordinates]{Use of
-% cartesian and absolute polar coordinates. The \texttt{\string\Zbox}
-% macro is just a shortcut to set a small dot with a (math) legend close
-% to it; its definition by means of the \texttt{xparse} functionalities
-% is straightforward.}
-%\label{fig:polar}
-%\end{figure}
-%
-% A similar example may be obtained with the |\polygon| macro that does
-% not require to terminate the polyline at the starting point.
-% Figure~\ref{fig:polygon} shows how to get a coloured filled pentagon.
-%
-%	\begin{figure}[!ht]
-%	\begin{minipage}{.48\linewidth}
-%	\begin{verbatim}
-%	\unitlength=.5mm
-%	\begin{picture}(40,32)(-20,-20)
-%	\color{magenta}
-%	\polygon*(90:20)(162:20)(234:20)(306:20)(378:20)
-%	\end{picture}
-%	\end{verbatim}
-%	\end{minipage}
-%   \hfill
-%	\begin{minipage}{.48\linewidth}\raggedleft
-%   \unitlength=.5mm
-%	\begin{picture}(40,32)(-20,-20)
-%	\color{magenta}
-%	\polygon*(90:20)(162:20)(234:20)(306:20)(378:20)
-%	\end{picture}\hspace*{2em}
-%	\end{minipage}
-%	\caption{A pentagon obtained by means of the \texttt{\string\polygon*}
-%   command; vertex coordinates are in relative polar form.}
-%	\label{fig:polygon}
-%	\end{figure}
-%
-% \item The new command |\Dashline| (alias: |\Dline| for backwards
-% compatibility)
-% \begin{flushleft}
-% |\Dashline|\parg{first point}\parg{second point}\marg{dash length}
-% \end{flushleft}
-% draws a dashed line containing as many dashes as possible, just as long
-% as specified, and separated by a gap exactly the same size; actually,
-% in order to make an even gap-dash sequence, the desired dash length is
-% used to do some computations in order to find a suitable length, close
-% to the one specified, such that the distance of the end points is
-% evenly divided in equally sized dashes and gaps.
-% The end points may be anywhere in the drawing area, without any
-% constraint on the slope of the joining segment. The desired dash length
-% is specified as a fractional multiple of |\unitlength|; see
-% figure~\ref{fig:dashline}.
-%	\begin{figure}[!ht]
-%	\begin{minipage}{.48\textwidth}
-%	\begin{verbatim}
-%	\unitlength=1mm
-%	\begin{picture}(40,40)
-%	\GraphGrid(40,40)
-%	\Dashline(0,0)(40,10){4}
-%	\put(0,0){\circle*{2}}
-%	\Dashline(40,10)(0,25){4}
-%	\put(40,10){\circle*{2}}
-%	\Dashline(0,25)(20,40){4}
-%	\put(0,25){\circle*{2}}
-%	\put(20,40){\circle*{2}}
-%	\Dotline(0,0)(40,40){2}
-% \put(40,40){\circle*{2}}
-%	\end{picture}
-%	\end{verbatim}
-%	\end{minipage}
-%	\hfill
-%	\begin{minipage}{.48\textwidth}\centering
-%	\unitlength=1mm
-%	\begin{picture}(40,40)
-%	\GraphGrid(40,40)
-%	\Dashline(0,0)(40,10){4}
-%	\put(0,0){\circle*{2}}
-%	\Dashline(40,10)(0,25){4}
-%	\put(40,10){\circle*{2}}
-%	\Dashline(0,25)(20,40){4}
-%	\put(0,25){\circle*{2}}
-%	\put(20,40){\circle*{2}}
-% \Dotline(0,0)(40,40){2}
-% \put(40,40){\circle*{2}}
-%	\end{picture}
-%	\end{minipage}
-%	\caption{Dashed lines and graph grid}\label{fig:dashline}
-%	\end{figure}
-%
-% Another example of usage of cartesian and polar coordinates usage is 
-% shown in figure~\ref{fig:polar} together with its code.
-% 
-%\begin{figure}\unitlength=0.007\textwidth
-%\begin{minipage}{0.55\textwidth}
-%\begin{verbatim}
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Dashline(0,0)(40,10){2}\Dashline(0,0)(40,20){2}
-%\Dashline(0,0)(40,30){2}\Dashline(0,0)(30,30){2}
-%\Dashline(0,0)(20,30){2}\Dashline(0,0)(10,30){2}
-%{\color{blue}%
-%\Dashline(40,0)(108:30){2}
-%\Dashline(40,0)(126:30){2}
-%\Dashline(40,0)(144:30){2}
-%\Dashline(40,0)(162:30){2}}
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.4\textwidth}\raggedleft
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Dashline(0,0)(40,10){2}
-%\Dashline(0,0)(40,20){2}
-%\Dashline(0,0)(40,30){2}
-%\Dashline(0,0)(30,30){2}
-%\Dashline(0,0)(20,30){2}
-%\Dashline(0,0)(10,30){2}
-%{\color{blue}%
-%\Dashline(40,0)(108:30){2}
-%\Dashline(40,0)(126:30){2}
-%\Dashline(40,0)(144:30){2}
-%\Dashline(40,0)(162:30){2}}%
-%\end{picture}
-%\end{minipage}
-%\caption{Different length dashed lines with the same nominal dash
-% length; notice the relative polar coordinates used for the dashed
-% lines starting at the grid lower right vertex.}
-%\label{fig:dashedlines}
-%\end{figure}
-%
-% Another
-%^^A
-%\item Analogous to |\Dashline|, a new command |\Dotline| draws a dotted
-% line with the syntax:
-% \begin{flushleft}
-% |\Dotline|\parg{first point}\parg{end point}\marg{dot gap}
-% \end{flushleft}
-% See figures~\ref{fig:dashline} and~\ref{fig:dottedlines} for examples.
-%
-%\begin{figure}[htb]\unitlength=0.007\textwidth
-%\begin{minipage}{0.55\textwidth}
-%\begin{verbatim}
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Dotline(0,0)(40,10){1.5}\Dotline(0,0)(40,20){1.5}
-%\Dotline(0,0)(40,30){1.5}\Dotline(0,0)(30,30){1.5}
-%\Dotline(0,0)(20,30){1.5}\Dotline(0,0)(10,30){1.5}
-%{\color{red}\Dotline(40,0)(108:30){1.5}
-%\Dotline(40,0)(126:30){1.5}
-%\Dotline(40,0)(144:30){1.5}
-%\Dotline(40,0)(162:30){1.5}}%
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.4\textwidth}\raggedleft
-%\begin{picture}(40,30)
-%\GraphGrid(40,30)
-%\Dotline(0,0)(40,10){1.5}
-%\Dotline(0,0)(40,20){1.5}
-%\Dotline(0,0)(40,30){1.5}
-%\Dotline(0,0)(30,30){1.5}
-%\Dotline(0,0)(20,30){1.5}
-%\Dotline(0,0)(10,30){1.5}
-%{\color{red}%
-%\Dotline(40,0)(108:30){1.5}
-%\Dotline(40,0)(126:30){1.5}
-%\Dotline(40,0)(144:30){1.5}
-%\Dotline(40,0)(162:30){1.5}}%
-%\end{picture}
-%\end{minipage}
-%\caption{Different length dotted lines with the same nominal dot gap;
-% again notice the relative polar coordinates for the dotted lines
-% starting at the grid lower right vertex.}
-%\label{fig:dottedlines}
-%\end{figure}
-%^^A
-% \item |\GraphGrid| is a command that draws a red grid under the drawing 
-% with lines separated |10\unitlength|s apart; it is described only with
-% a comma separated couple of numbers, representing the base and the
-% height of the grid, see figure~\ref{fig:dashline}; it's better to
-% specify multiples of ten and the grid can be placed anywhere in the
-% drawing canvas by means of |\put|, whose cartesian coordinates are
-% multiples of 10; nevertheless the grid line distance is rounded to the
-% nearest multiple of 10, while the point coordinates specified to |\put|
-% are not rounded at all; therefore some care should be used to place the
-% working grid on the drawing canvas. This grid is intended as an aid
-% while drawing; even if you sketch your drawing on millimetre paper, the
-% drawing grid turns out to be very useful; one must only delete or
-% comment out the command when the drawing is finished. Several examples
-% of usage of such grid are shown in several figures.
-%^^A
-% \item New trigonometric function macros have been  computed by means of
-% the functionalities of the |xfp| package. The difference woth the other
-% existing macros is that angles are specified in sexagesimal degrees, so
-% that the users need not transform to radians. The computations are done
-% taking into account that “abnormal” values can occasionally be avoided,
-% for example $\tan90^\circ$ must be avoided and replaced with a suitably
-% large number, because the TeX\ system does not handle “infinity”.
-%
-% These trigonometric functions are used within the complex number
-% macros; but if the user wants to use them the syntax is the following:
-%\begin{flushleft}
-%      \cs{SinOf}\meta{angle}\texttt{to}\meta{control sequence}\\
-%      \cs{CosOf}\meta{angle}\texttt{to}\meta{control sequence}\\
-%      \cs{TanOf}\meta{angle}\texttt{to}\meta{control sequence}
-%\end{flushleft}
-% The \meta{control sequence} may then be used, for example, as a
-% multiplying factor of a length.
-% 
-%^^A
-% \item Arcs can be drawn as simple circular arcs, or with one or two
-% arrows at their ends (curved vectors);  the syntax is:
-%\begin{flushleft}
-% \cs{Arc}\parg{center}\parg{starting point}\marg{angle}\\
-% \cs{VectorArc}\parg{center}\parg{starting point}\marg{angle}\\
-% \cs{VectorARC}\parg{center}\parg{starting point}\marg{angle}\\
-%\end{flushleft}
-% If the angle is specified numerically it must be enclosed in braces,
-% while if it is specified with a control sequence the braces (curly
-% brackets) are not necessary. The above macro |\Arc| draws a simple
-% circular arc without arrows; |\VectorArc| draws an arc with an arrow
-% tip at the ending point; |\VectorARC| draws an arc with arrow tips at
-% both ends; see figure~\ref{fig:arcs}.
-%	\begin{figure}
-%	\begin{minipage}{.48\textwidth}
-%	\begin{verbatim}
-%	\unitlength=0.5mm
-%	\begin{picture}(60,40)
-%	\GraphGrid(60,40)
-%	\Arc(0,20)(30,0){60}
-%	\VECTOR(0,20)(30,0)\VECTOR(0,20)(32.5,36)
-%	\VectorArc(0,20)(15,10){60}
-%	\put(20,20){\makebox(0,0)[l]{$60^\circ$}}
-%	\VectorARC(60,20)(60,0){-180}
-%	\end{picture}
-%	\end{verbatim}
-%	\end{minipage}
-%	\hfill
-%	\begin{minipage}{.48\textwidth}\centering
-%	\unitlength=0.5mm
-%	\begin{picture}(60,40)
-%	\GraphGrid(60,40)
-%	\Arc(0,20)(30,0){60}
-%	\VECTOR(0,20)(30,0)\VECTOR(0,20)(32.5,36)
-%	\VectorArc(0,20)(15,10){60}
-%	\put(20,20){\makebox(0,0)[l]{$60^\circ$}}
-%	\VectorARC(60,20)(60,0){-180}
-%	\end{picture}
-%	\end{minipage}
-%	\caption{Arcs and curved vectors}\label{fig:arcs}
-%	\end{figure}
-%^^A
-% \item A multitude of commands have been defined in order to manage
-% complex numbers; actually complex numbers are represented as a comma
-% separated pair of fractional numbers (here we use only cartesian
-% coordinates). They are used to address specific points in the drawing
-% plane, but also as operators so as to scale and rotate other objects.
-% In the following \meta{vector} means a comma separated pair of
-% fractional numbers, \meta{vector macro} means a macro that contains a
-% comma separated pair of fractional numbers; \meta{angle macro} means a
-% macro that contains the angle of a vector in sexagesimal degrees;
-% \meta{argument} means a brace delimited numeric value, even a macro;
-% \meta{numeric macro} means a macro that contains a fractional number;
-% \textit{macro} is a valid macro name, i.e.~a backslash followed by
-% letters, or anything else that can receive a definition. A
-% \emph{direction} of a vector is its versor; the angle of a vector is
-% the angle between the vector and the positive $x$ axis in
-% counterclockwise direction, as it is used in the
-% Euler formula $ \vec{v} = Me^{\mathrm{j}\varphi}$.
-%
-% {\footnotesize\begin{itemize}
-% \item |\MakeVectorFrom|\meta{numeric macro}\meta{numeric macro}|to|\meta{vector macro}
-% \item |\CopyVect|\meta{first vector}|to|\meta{second vector macro}
-% \item |\ModOfVect|\meta{vector}|to|\meta{modulus macro}
-% \item |\DirOfvect|\meta{vector}|to|\meta{versor macro}
-% \item |\ModAndDirOfVect|\meta{vector}|to|\meta{modulus macro}|and|\meta{versor macro}
-% \item |\ModAndAngleOfVect|\meta{vector}|to|\meta{modulus macro}|and|\meta{angle macro}
-% \item |\DistanceAndDirOfVect|\meta{1st vector}|minus|\meta{2nd vector}|to|\meta{distance macro}|and|\meta{versor macro}
-% \item |\XpartOfVect|\meta{vector}|to|\meta{macro}
-% \item |\YpartOfVect|\meta{vector}|to|\meta{macro}
-% \item |\DirFromAngle|\meta{angle}|to|\meta{versor macro}
-% \item |\ArgOfVect|\meta{vector}|to|\meta{angle macro}
-% \item |\ScaleVect|\meta{vector}|by|\meta{scaling factor}|to|\meta{vector macro}
-% \item |\ConjVect|\meta{vector}|to|\meta{conjugate vector macro}
-% \item |\SubVect|\meta{subtrahend vector}|from|\meta{minuend vector}|to|\meta{vector macro}
-% \item |\AddVect|\meta{first vector}|and|\meta{second vector}|to|\meta{vector macro}
-% \item |\Multvect|\marg{first vector}*\marg{second vector}*\marg{vector macro} (the asterisks are optional; either one changes the second vector into its complex conjugate)
-% \item |\MultVect|\meta{first vector}|by|\meta{second vector}|to|\meta{vector macro} (discouraged; maintained for backwards compatibility)
-% \item |\MultVect|\meta{first vector}|by*|\meta{second vector}|to|\meta{vector macro} (discouraged; maintained for backwards compatibility)
-% \item |\Divvect|\marg{dividend vector}\marg{divisor vector}\marg{ vector macro}
-% \item |\DivVect|\meta{dividend vector}|by|\meta{divisor vector}|to|\meta{vector macro} (maintained for backwards compatibility)
-% \end{itemize}}
-%^^A
-% \item General curves can be drawn with the |pict2e| macro |\curve| but
-% it requires the specification of the third-order Bézier-spline control
-% points; sometimes it's better to be very specific with the control
-% points and there is no other means to do a decent graph; sometimes the
-% curves to be drawn are not so tricky and a general set of macros can be
-% defined so as to compute the control points, while letting the user
-% specify only the nodes through which the curve must pass, and the
-% tangent direction of the curve in such nodes. Such commands are the
-% following:
-%\begin{itemize}
-%
-%\item \cs{Curve} to draw a sequence of arcs as explained above, using
-% third order (cubic) Bézier splines. The starred version of this command
-% fills the internal part of the curve with the current color; if the
-% last arc finishes where the fist arc starts, it is clear what is the
-% interior; if it does not, the driver  (not the code of this package,
-% but the driver between this code and the physical representation on
-% paper or screen) assumes a straight line closure of the whole path.
-%
-%\item \cs{Qurve} similar to |\Curve|, but with second order (quadratic)
-% Bézier splines. The starred version fills the interior with the current
-% color.
-%
-%\item \cs{CurveBetween} draws a single cubic Bézier spline between two
-% given nodes and with two given directions vectors.
-%
-%\item \cs{CBezierBetween}  draws a single cubic Bézier spline between
-% two given nodes, with two given directions versors along which the
-% control node distances are specified. This is the most general macro
-% (rather difficult to use) with which not only the arc end points are
-% specified but also the control nodes coordinates are given.
-%
-%\end{itemize}
-%
-% The main macro is |\Curve| and must be followed by an “unlimited”
-% sequence of node-direction coordinates as a quadruple
-% defined as
-%\[
-% \parg{node coordinates}\aarg{direction vector}
-%\]
-% Possibly if a sudden change of direction has to be performed (cusp)
-% another item can be inserted after one of those quadruples in the form
-%\[
-% \mbox{\dots\parg{...}\aarg{...}\oarg{new direction vector}\parg{...}\aarg{...}\dots}
-%\]
-%
-% Possibly it is necessary to specify the “tension” or the “looseness”
-% of a specific Bézier arc; such tension parameters range from 0 (zero)
-% to~4; the zero value implies a very stiff arc, as if it was a string
-% subject to a high tension (i.e. with zero looseness); a value of~4
-% implies a very low tension (very high looseness), almost as if the
-% string was not subject to any tension. In \MF\ or \MP\ language such a
-% concept is used very often; in this package, where the Hobby
-% algorithms are not used, the parameter value appears to mean the
-% opposite of tension.
-% A couple of comma separated tension values may be optionally used, they
-% are separated with a semicolon form the direction vector,
-% and they apply to the arc terminating with the last node; their
-% specification  must precede any possible change of tangent according to
-% this syntax\footnote{The tension may be specified only for cubic
-% splines, because the quadratic ones do not use enough parameters to
-% control the tension; not all commands for drawing cubic splines accept
-% this optional tension specification.}:
-%\[
-%\mbox{\dots\parg{...}\aarg{\upshape{\em direction vector}\texttt{;}{\em start tension}|,|{\em end tension}}\parg{...}\aarg{...}\dots}
-%\]
-%
-% The |\Curve| macro does not (still) have facilities for cycling the
-% path, that is to close the path from the last specified node-direction
-% to the first specified node-direction; but, as already mentioned, if
-% the ending node of the last arc does not coincide with the starting
-% node of the first arc, a straight line is assumed to join such nodes;
-% this line does not get drawn, but with starred commands no lines are
-% drawn because only the interior is coloured.
-% The tangent direction need not be specified with a unit vector,
-% although only its direction is relevant; the scaling of the specified
-% direction vector to a unit vector is performed by the macro itself.
-% Therefore one cannot specify the fine tuning of the curve convexity as
-% it can be done with other programs or commands, as, for example, with
-% \MF\  or the |pgf/tikz| package and environment. See figure~\ref{fig:curve} for
-% an example.
-%	\begin{figure}[htb]
-%	\begin{minipage}{.48\textwidth}
-%   \begin{verbatim}
-%	\unitlength=8mm\relax
-%	\begin{picture}(5,5)
-%	\put(0,0){\framebox(5,5){}}\thicklines\roundcap
-%	\Curve(2.5,0)<1,1>(5,3.5)<0,1>%
-%	  (4,5)<-1,0>(2.5,3.5)<-.5,-1.2>[-.5,1.2]%
-%	  (1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<1,-1>
-%	\end{picture}
-%   \end{verbatim}
-%	\end{minipage}
-%	\hfill
-%	\begin{minipage}{.48\textwidth}\raggedleft\relax
-%	\unitlength=8mm\relax
-%	\begin{picture}(5,5)
-%	\put(0,0.5){\put(0,0){\framebox(5,5){}}\thicklines\roundcap
-%	\Curve(2.5,0)<1,1>(5,3.5)<0,1>(4,5)<-1,0>(2.5,3.5)<-0.5,-1.2>[-0.5,1.2](1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<1,-1>}
-%	\end{picture}
-%	\end{minipage}
-%	\caption{A heart shaped curve with cusps drawn with \texttt{\string\Curve}}
-%	\label{fig:curve}
-
-%\vspace*{2\baselineskip}
-%
-%	\begin{minipage}{.48\textwidth}
-%   \begin{verbatim}
-%	\unitlength=8mm\relax
-%	\begin{picture}(5,5)
-%	\put(0,0){\framebox(5,5){}}\thicklines\roundcap
-%   \color{green}\relax
-%	\Curve*(2.5,0)<1,1>(5,3.5)<0,1>%
-%	  (4,5)<-1,0>(2.5,3.5)<-.5,-1.2>[-.5,1.2]%
-%	  (1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<1,-1>
-%	\end{picture}
-%   \end{verbatim}
-%	\end{minipage}
-%	\hfill
-%	\begin{minipage}{.48\textwidth}\raggedleft\relax
-%	\unitlength=8mm\relax
-%	\begin{picture}(5,5)
-%	\put(0,0.5){\put(0,0){\framebox(5,5){}}\thicklines\roundcap
-%   \color{green}\relax
-%	\Curve*(2.5,0)<1,1>(5,3.5)<0,1>(4,5)<-1,0>(2.5,3.5)<-0.5,-1.2>[-0.5,1.2](1,5)<-1,0>(0,3.5)<0,-1>(2.5,0)<1,-1>}
-%	\end{picture}
-%	\end{minipage}
-%\caption{Coloring the inside of a closed path drawn with \texttt{\string\Curve*}}
-%\label{fig:colored-curve}
-
-%	\end{figure}
-%
-% With the starred version of |\Curve|, instead of stroking the contour,
-% the macro fills up the contour with the selected current color,
-% figure~\ref{fig:colored-curve}.
-%
-% Figure~\ref{fig:arcspline} shows a geometric construction that
-% contains the geometric elements and symbols used to determine the
-% parameters of a cubic spline required to draw a quarter circle. This
-% construction contains many of the commands described so far.
-%
-%\begin{figure}[p]
-%\begin{minipage}{\linewidth}\small
-%\begin{verbatim}
-%\unitlength=0.007\textwidth
-%\begin{picture}(100,90)(-50,-50)
-%\put(-50,0){\vector(1,0){100}}\put(50,1){\makebox(0,0)[br]{$x$}}%
-%\put(20,-1){\makebox(0,0)[t]{$s$}}%
-%\put(0,0){\circle*{2}}\put(-1,-1){\makebox(0,0)[tr]{$M$}}%
-%\legenda(12,-45){s=\overline{MP_2}=R\sin\theta}%
-%\put(0,-50){\vector(0,1){90}}%
-%\put(1,40){\makebox(0,0)[tl]{$y$}}%
-%\put(0,-40){\circle*{2}}\put(1,-41){\makebox(0,0)[lt]{$C$}}%
-%\segment(0,-40)(-40,0)\segment(0,-40)(40,0)%
-%\put(-41,1){\makebox(0,0)[br]{$P_1$}}\put(-40,0){\circle*{2}}%
-%\put(41,1){\makebox(0,0)[bl]{$P_2$}}\put(40,0){\circle*{2}}%
-%\put(0,0){\linethickness{1pt}\Arc(0,-40)(40,0){90}}%
-%\segment(-40,0)(-20,20)\put(-20,20){\circle*{2}}%
-%\put(-20,21.5){\makebox(0,0)[b]{$C_1$}}%
-%\segment(40,0)(20,20)\put(20,20){\circle*{2}}%
-%\put(20,21.5){\makebox(0,0)[b]{$C_2$}}%
-%\put(0,-40){\put(0,56.5685){\circle*{2}}%
-%\put(1,58){\makebox(0,0)[bl]{$P$}}}%
-%\VectorARC(0,-40)(15,-25){45}\put(10,-18){\makebox(0,0)[c]{$\theta$}}%
-%\VectorARC(40,0)(20,0){-45}\put(19,5){\makebox(0,0)[r]{$\theta$}}%
-%\VectorARC(-40,0)(-20,0){45}\put(-19,5){\makebox(0,0)[l]{$\theta$}}%
-%\put(-20,-18){\makebox(0,0)[bl]{$R$}}%
-%\put(-32,13){\makebox(0,0)[bl]{$K$}}%
-%\put(32,13){\makebox(0,0)[br]{$K$}}%
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}\vspace{\stretch{1}}
-%
-%\begin{minipage}{\linewidth}\centering
-%\unitlength=0.007\textwidth
-%\begin{picture}(100,90)(-50,-50)
-%\put(-50,0){\vector(1,0){100}}\put(50,1){\makebox(0,0)[br]{$x$}}%
-%\put(20,-1){\makebox(0,0)[t]{$s$}}%
-%\put(0,0){\circle*{2}}\put(-1,-1){\makebox(0,0)[tr]{$M$}}%
-%\legenda(12,-45){s=\overline{MP_2}=R\sin\theta}%
-%\put(0,-50){\vector(0,1){90}}%
-%\put(1,40){\makebox(0,0)[tl]{$y$}}%
-%\put(0,-40){\circle*{2}}\put(1,-41){\makebox(0,0)[lt]{$C$}}%
-%\segment(0,-40)(-40,0)\segment(0,-40)(40,0)%
-%\put(-41,1){\makebox(0,0)[br]{$P_1$}}\put(-40,0){\circle*{2}}%
-%\put(41,1){\makebox(0,0)[bl]{$P_2$}}\put(40,0){\circle*{2}}%
-%\put(0,0){\linethickness{1pt}\Arc(0,-40)(40,0){90}}%
-%\segment(-40,0)(-20,20)\put(-20,20){\circle*{2}}%
-%\put(-20,21.5){\makebox(0,0)[b]{$C_1$}}%
-%\segment(40,0)(20,20)\put(20,20){\circle*{2}}%
-%\put(20,21.5){\makebox(0,0)[b]{$C_2$}}%
-%\put(0,-40){\put(0,56.5685){\circle*{2}}%
-%\put(1,58){\makebox(0,0)[bl]{$P$}}}%
-%\VectorARC(0,-40)(15,-25){45}\put(10,-18){\makebox(0,0)[c]{$\theta$}}%
-%\VectorARC(40,0)(20,0){-45}\put(19,5){\makebox(0,0)[r]{$\theta$}}%
-%\VectorARC(-40,0)(-20,0){45}\put(-19,5){\makebox(0,0)[l]{$\theta$}}%
-%\put(-20,-18){\makebox(0,0)[bl]{$R$}}%
-%\put(-32,13){\makebox(0,0)[bl]{$K$}}%
-%\put(32,13){\makebox(0,0)[br]{$K$}}%
-%\end{picture}
-%\end{minipage}
-%\caption{The code to display the nodes and control points for an arc to
-% be approximated with a cubic Bézier spline}
-%\label{fig:arcspline}
-%\end{figure}
-%
-%
-% To show what you can do with |\CurveBetween| see the code and result
-% shown in figure~\ref{fig:curva-due-punti}. Notice the effect of
-% changing the directions at both or a the end nodes of a single cubic
-% spline. The directions are conveniently expressed with unit vectors
-% described by polar coordinates.
-
-%\begin{figure}\centering\unitlength=0.004\textwidth
-%\begin{picture}(220,120)(-50,-20)
-%\put(0,60){\Line(-50,0)(50,0)
-%\CurveBetween-50,0and50,0WithDirs15:1and{-15:1}
-%\CurveBetween-50,0and50,0WithDirs30:1and{-30:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-45:1}
-%\CurveBetween-50,0and50,0WithDirs60:1and{-60:1}
-%\CurveBetween-50,0and50,0WithDirs75:1and{-75:1}
-%\CurveBetween-50,0and50,0WithDirs90:1and{-90:1}}
-%\put(120,60){%
-%\Line(-50,0)(50,0)
-%\CurveBetween-50,0and50,0WithDirs15:1and{15:1}
-%\CurveBetween-50,0and50,0WithDirs30:1and{30:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{45:1}
-%\CurveBetween-50,0and50,0WithDirs60:1and{60:1}
-%\CurveBetween-50,0and50,0WithDirs75:1and{75:1}
-%\CurveBetween-50,0and50,0WithDirs90:1and{90:1}}
-%\put(0,0){%
-%\Line(-50,0)(50,0)
-%\CurveBetween-50,0and50,0WithDirs45:1and{-15:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-30:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-45:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-60:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-75:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{-90:1}}
-%\put(120,0){%
-%\Line(-50,0)(50,0)
-%\CurveBetween-50,0and50,0WithDirs45:1and{15:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{30:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{45:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{60:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{75:1}
-%\CurveBetween-50,0and50,0WithDirs45:1and{90:1}}
-%\end{picture}
-%\caption{Curves between two points with different start and end slopes}\label{fig:curva-due-punti}
-%\end{figure}
-%
-% A little more complicated is the use of the |\CBezierBetween| macro,
-% figure~\ref{fig:Cbezier}. The directions are specified with unit
-% vectors in polar form; the control points are specified by adding their
-% distances from their neighbouring nodes; actually the right distance
-% is maintained to the value~1, while the left one increases from~4
-% to~10.
-% The black line corresponds to the standard |\CurveBetween| where the
-% default distance is computed to trace an arc of a circle and
-% is approximately~3.5. 
-%
-%\begin{figure}[!tb]
-%\begin{minipage}[t]{0.52\textwidth}
-%\begin{verbatim}
-%\unitlength=0.1\textwidth
-%\begin{picture}(10,3)
-%\CurveBetween0,0and10,0WithDirs1,1and{1,-1}
-%\color{red}%
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists4And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists6And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists8And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists10And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists12And{1}
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.40\textwidth}\raggedleft
-%\unitlength=0.1\textwidth
-%\begin{picture}(10,3)(0,1.25)
-%\CurveBetween0,0and10,0WithDirs1,1and{1,-1}
-%\color{red}%
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists4And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists6And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists8And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists10And{1}
-%\CbezierBetween0,0And10,0 WithDirs45:1And-45:1UsingDists12And{1}
-%\end{picture}
-%\end{minipage}
-%\caption{Comparison between similar arcs drawn with \cs{CurveBetween} (black)
-% and \cs{CbezierTo} (red)}
-%\label{fig:Cbezier}
-%\end{figure}
-%
-% In figure~\ref{fig:tensions} the effect of tension specification is
-% shown. The red line corresponds to the default tension, since the
-% tension values are not specified. The black lines correspond to the
-% various values used in the various commands to the |\Curve| macro.
-% With a tension of zero, the spline is almost coincident with the
-% horizontal base line of the frame. Increasing the parameter value
-% to~4.5, the curved becomes taller and taller, until it wraps itself
-% displaying an evident loop. We would say that the value of ~2 is a
-% reasonable  maximum  and  increasing that value is just to
-% obtain special effects.
-%
-%\begin{figure}[!htb]\centering
-%\begin{minipage}{0.48\textwidth}\small
-%\begin{verbatim}
-%\raggedleft\unitlength=0.01\textwidth
-%\begin{picture}(70,70)
-%\put(0,0){\color{blue}\frame(70,70){}}
-%\put(0,0){\color{red}\Curve(0,0)<1,1>(70,0)<1,-1>}
-%\Curve(0,0)<1,1>(70,0)<1,-1;0,0>
-%\Curve(0,0)<1,1>(70,0)<1,-1;0.2,0.2>
-%\Curve(0,0)<1,1>(70,0)<1,-1;2,2>
-%\Curve(0,0)<1,1>(70,0)<1,-1;4.5,4.5>
-%\Curve(0,0)<1,1>(70,0)<1,-1;0,3>
-%\Curve(0,0)<1,1>(70,0)<1,-1;3,0>
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.46\textwidth}
-%\raggedleft\unitlength=0.01\textwidth
-%\begin{picture}(70,70)
-%\put(0,0){\color{blue}\framebox(70,70){}}
-%\put(0,0){\color{red}\Curve(0,0)<1,1>(70,0)<1,-1>}
-%\Curve(0,0)<1,1>(70,0)<1,-1;0,0>
-%\Curve(0,0)<1,1>(70,0)<1,-1;0.2,0.2>
-%\Curve(0,0)<1,1>(70,0)<1,-1;2,2>
-%\Curve(0,0)<1,1>(70,0)<1,-1;4.5,4.5>
-%\Curve(0,0)<1,1>(70,0)<1,-1;0,3>
-%\Curve(0,0)<1,1>(70,0)<1,-1;3,0>
-%\end{picture}
-%\end{minipage}
-%\caption{The effects of tension factors}\label{fig:tensions}
-%\end{figure}
-%
-% Figure~\ref{fig:sinewave} displays two approximations of a sine wave;
-% Bézier splines can approximate transcendental curves, but the
-% approximation may be a poor one, depending on the approximated curve,
-% when few arcs are used to draw it. With arcs specified with more
-% complicated macros the approximation is better even with a lower number
-% of arcs.  With many arcs it is possible to approximate almost anything.
-% On the left side a modest approximation is obtained with just three
-% standard arcs obtained with |\Curve| and four node specifications;
-% on the right we have just two arcs created with |CBezierBetween| 
-% with tension specification and control point distances; this drawing 
-% is almost undistinguishable from a real sinusoid.
-%
-%\begin{figure}[!htb]
-%\begin{minipage}{\linewidth}
-%\begin{verbatim}
-%\unitlength=0.01\textwidth
-%\begin{picture}(100,50)(0,-25)
-%\put(0,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
-%\Zbox(45,0)[br]{x}\Zbox(0,26)[tl]{y}
-%\Curve(0,0)<77:1>(10,20)<1,0;2,0.4>(30,-20)<1,0;0.4,0.4>(40,0)<77:1;0.4,2>
-%}
-%\put(55,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
-%\Zbox(45,0)[br]{x}\Zbox(0,26)[tl]{y}
-%\CbezierBetween0,0And20,0WithDirs77:1And-77:1UsingDists28And{28}
-%\CbezierBetween20,0And40,0WithDirs-77:1And77:1UsingDists28And{28}}
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}\vspace{\baselineskip}
-%
-%\begin{minipage}{\linewidth}
-%\unitlength=0.01\textwidth
-%\begin{picture}(100,50)(0,-25)
-%\put(0,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
-%\Zbox(45,0)[br]{x}\Zbox(0,26)[tl]{y}
-%\Curve(0,0)<77:1>(10,20)<1,0;2,0.4>(30,-20)<1,0;0.4,0.4>(40,0)<77:1;0.4,2>
-%}
-%\put(55,0){\VECTOR(0,0)(45,0)\VECTOR(0,-25)(0,25)
-%\Zbox(45,0)[br]{x}\Zbox(0,26)[tl]{y}
-%\CbezierBetween0,0And20,0WithDirs77:1And-77:1UsingDists28And{28}
-%\CbezierBetween20,0And40,0WithDirs-77:1And77:1UsingDists28And{28}}
-%\end{picture}
-%\end{minipage}
-%\caption{A sequence of arcs; the left figure has been drawn with the
-% \cs{Curve} command with a sequence of four couples of point-direction
-% arguments; the right figure has been drawn with two commands
-% \cs{CbezierBetween} that include also the specification of the control
-% points}
-%\label{fig:sinewave}
-%\end{figure}
-%
-% In figure~\ref{fig:quadratic-arcs} some lines drawn are shown; they are
-% drawn  with quadratic splines by means of the |\Qurve| macro. In the
-% left there are some open and closed curves inscribed within a square.
-% On the right a “real" circle is compared to a quadratic spline circle;
-% the word “real” is emphasised because it actually is an approximation
-% with four quarter-circle cubic splines that, in spite of being drawn
-% with third degree parametric polynomials, approximate very well a real
-% circle; on the opposite the quadratic spline circle is clearly a poor
-% approximation even if the maximum radial error amounts just to about
-% 6\% of the radius.
-%
-%\begin{figure}[!htb]
-%\begin{minipage}{\linewidth}
-%\begin{Verbatim}[fontsize=\setfontsize{7.75}]
-%\unitlength=0.0045\textwidth
-%\begin{picture}(100,100)
-%\put(0,0){\framebox(100,100){}}
-%\put(50,50){%
-%  \Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
-%\color{green}
-%  \Qurve*(0,-50)<0,1>(50,0)<1,0>[-1,0](0,50)<0,1>[0,-1](-50,0)<-1,0>[1,0](0,-50)<0,-1> 
-%}
-%\Qurve(0,0)<1,4>(50,50)<1,0>(100,100)<1,4>
-%\put(5,50){\Qurve(0,0)<1,1.5>(22.5,20)<1,0>(45,0)<1,-1.5>%
-%(67.5,-20)<1,0>(90,0)<1,1.5>}
-%\Zbox(0,0)[tc]{0,0}\Zbox(100,0)[tc]{100,0}
-%\Zbox(100,100)[bc]{100,100}\Zbox(0,100)[bc]{0,100}
-%\Pall[2](0,0)\Pall[2](100,0)\Pall[2](100,100)\Pall[2](0,100)
-%\end{picture}
-%\hfill
-%\begin{picture}(100,100)
-%\put(0,0){\framebox(100,100){}}
-%\put(50,50){%
-%\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
-%\Curve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
-%\Zbox(50,50)[t]{O}\Pall[2](50,50)\put(50,50){\Vector(45:50)}\Zbox(67,70)[tl]{R}
-%\end{picture}
-%\end{Verbatim}
-%\end{minipage}\vspace{2\baselineskip}
-%
-%\begin{minipage}{\linewidth}
-%\unitlength=0.0045\textwidth
-%\begin{picture}(100,100)
-%\put(0,0){\framebox(100,100){}}
-%\put(50,50){\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
-%\put(50,50){\color{green}%
-%\Qurve*(0,-50)<0,1>(50,0)<1,0>[-1,0](0,50)<0,1>[0,-1](-50,0)<-1,0>[1,0](0,-50)<0,-1>}
-%\Qurve(0,0)<1,4>(50,50)<1,0>(100,100)<1,4>
-%\put(5,50){\Qurve(0,0)<1,1.5>(22.5,20)<1,0>(45,0)<1,-1.5>(67.5,-20)<1,0>(90,0)<1,1.5>}
-%\Zbox(0,0)[tc]{0,0}\Zbox(100,0)[tc]{100,0}
-%\Zbox(100,100)[bc]{100,100}\Zbox(0,100)[bc]{0,100}
-%\Pall[2](0,0)\Pall[2](100,0)\Pall[2](100,100)\Pall[2](0,100)
-%\end{picture}
-%\hfill
-%\begin{picture}(100,100)
-%\put(0,0){\framebox(100,100){}}
-%\put(50,50){\Qurve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>
-%\Curve(0,-50)<1,0>(50,0)<0,1>(0,50)<-1,0>(-50,0)<0,-1>(0,-50)<1,0>}
-%\Zbox(50,50)[t]{O}\Pall[2](50,50)\put(50,50){\Vector(45:50)}\Zbox(67,70)[tl]{R}
-%\end{picture}
-%\end{minipage}
-%
-%\caption{\rule{0pt}{4ex}Several graphs drawn with quadratic Bézier
-% splines. On the right a quadratic spline circle is compared with a
-% cubic line circle.}
-%\label{fig:quadratic-arcs}
-%\end{figure}
-%
-% Notice that the previous version of |curve2e| contained an error and
-% would color the outside of the green four-pointed star. 
-% The |curve2e-v161|, attached to this bundle, has been corrected;
-% therefore it is not actually identical to the previous version,
-% although the latter one performed correctly for everything else except
-% for color-filled quadratic paths.
-% ^^A
-% \item The new version of |\multiput| is backwards compatibile with
-% the original version contained in the \LaTeX\ kernel. The new macro
-% adds the handling of the coordinate increments from one position to
-% the next for the \meta{object} to include in the drawing.
-%
-% On page~\pageref{pag:multiput} we show the code for the figure shown
-% there. The red grid is nothing new, except that it displays the
-% traditional |\multiput| used in this code, shown in a previous example,
-% produces exactly the same result. But the for “graphs” on the grid, it
-% display an alignment of black dots along the diagonal of the grid
-% (again traditional |\multiput| rendered with the new version);
-% a number of blue dots along a parabola; another number of magenta
-% dots alined along a half sine wave; a number of little green squares
-% aligned along a $-15~\circ$ line starting from the center of the grid;
-% notice the polar values that are used as polar relative coordinate
-% increments.
-%
-%\noindent\begin{figure}[!htb]
-%\begin{minipage}{0.45\linewidth}
-%\begin{Verbatim}[fontsize=\setfontsize{8}]
-%\unitlength=0.01\linewidth
-%\begin{picture}(100,100)
-%\GraphGrid(100,100)
-%\multiput(0,0)(10,10){11}{\circle*{2}}
-%\color{blue!70!white}
-%\multiput(0,0)(10,0){11}{\circle*{2}}%
-%  [\GetCoord(\R)\X\Y
-%  \edef\X{\fpeval{\X+10}}
-%  \edef\Y{\fpeval{(\X/10)**2}}
-%  \CopyVect\X,\Y to\R]
-%\color{magenta}
-%\multiput(0,0)(10,1){11}{\circle*{2}}%
-%  [\GetCoord(\R)\X\Y
-%   \edef\X{\fpeval{\X+10}}
-%   \edef\Y{\fpeval{sind(\X*1.8)*100}}
-%   \CopyVect\X\Y to\R]
-%\color{green!60!black}
-%\multiput(50,50)(-15:5){11}}{%
-%\polygon*(-1,-1)(1,-1)(1,1)(-1,1)}
-%\end{picture}
-%\end{Verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.45\linewidth}
-%\unitlength=0.01\linewidth
-%\begin{picture}(100,100)
-%\GraphGrid(100,100)
-%\multiput(0,0)(10,10){11}{\circle*{2}}
-%\color{blue!70!white}
-%\multiput(0,0)(10,0){11}{\circle*{2}}%
-%  [\GetCoord(\R)\X\Y
-%  \edef\X{\fpeval{\X+10}}
-%  \edef\Y{\fpeval{(\X/10)**2}}
-%  \CopyVect\X,\Y to\R]
-%\color{magenta}
-%\multiput(0,0)(10,1){11}{\circle*{2}}%
-%  [\GetCoord(\R)\X\Y
-%   \edef\X{\fpeval{\X+10}}
-%   \edef\Y{\fpeval{sind(\X*1.8)*100}}
-%   \CopyVect\X,\Y to\R]
-%\color{green!60!black}
-%\multiput(50,50)(-15:5){11}{\polygon*(-1,-1)(1,-1)(1,1)(-1,1)}
-%\end{picture}
-%\end{minipage}
-%\caption{Some examples of the \meta{handler} optional argument}%\label{pag:multiput}
-%\end{figure}
-%
-% A new command |\xmultiput| (not available with the previous versions
-% of |curve2e|) extended with respect to the original |\multiput| is
-% defined by using some L3 functions; in particular the cycling
-% counter is accessible to the \LaTeX\ commands and  it is stepped
-% forward from~1 to the value specified in the proper command argument
-% (in the original command it starts from that value and is stepped down
-% to zero). See the figure on page~\ref{pag:orologio} to inspect its
-% usage. It is important to notice that if the command|\rotatebox|
-% has to be used, as in the example of figure~\ref{pag:orologio}, the
-% package |graphics| should be also loaded, because |curve2e| does not
-% do it.
-%
-%\begin{figure}[!htb]
-%\begin{minipage}{0.45\textwidth}
-%\begin{verbatim}
-%\unitlength=0.0095\linewidth
-%\begin{picture}(100,100)
-%\GraphGrid(100,100)
-%\put(50,50){\thicklines\circle{100}}
-%\xmultiput[50,50](60:40)(-30:1){12}%
-%  {\makebox(0,0){\circle*{2}}}%
-%  [\MultVect\R by\D to\R]% 
-%\xmultiput[50,50](60:46)(-30:1){12}%
-%  {\ArgOfVect\R to\Ang
-%  \rotatebox{\fpeval{\Ang-90}}%
-%  {\makebox(0,0)[b]{\Roman{multicnt}}}}%
-%  [\Multvect{\R}{\D}\R]
-%\end{picture}
-%\end{verbatim}
-%\end{minipage}
-%\hfill
-%\begin{minipage}{0.45\textwidth}\raggedleft
-%\unitlength=0.0095\linewidth
-%\begin{picture}(100,100)
-%\GraphGrid(100,100)
-%\put(50,50){\thicklines\circle{100}}
-%\xmultiput[50,50](60:40)(-30:1){12}%
-%  {\makebox(0,0){\circle*{2}}}[\MultVect\R by\D to\R]% 
-%\xmultiput[50,50](60:43)(-30:1){12}%
-%  {\ArgOfVect\R to\Ang\rotatebox{\fpeval{\Ang-90}}%
-%    {\makebox(0,0)[b]{\Roman{multicnt}}}}%
-%      [\Multvect{\R}{\D}\R]
-%\end{picture}
-%\end{minipage}
-%\caption{Usage example of the \texttt{\string\xmultiput} command}
-%\label{pag:orologio}\hfill
-%\end{figure}
-%  
-% \end{enumerate}
-%
-%
-% In spite of the relative simplicity of the macros contained in this
-% package, the described macros, as well as the original ones included in
-% the |pict2e| package, allow to produce fine drawings that were
-% unconceivable with the original \LaTeX\ picture environment. Leslie
-% Lamport himself announced an extension to his environment when \LaTeXe\
-% was first released in 1994; in the |latexnews| news-letter of December
-% 2003; the first implementation was announced; the first version of this
-% package |curve2e| was issued in 2006. It was time to have a  better
-% drawing environment; this package is a simple attempt to follow the
-% initial path while extending the drawing facilities; but Till Tantau's
-% |pgf| package has gone much farther.
-%
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \section{Remark}
-%^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% There are other packages in the \textsc{ctan} archives that deal with
-% tracing curves of various kinds. |PSTricks| and |tikz/pgf| are the most
-% powerful ones.
-% But there is also the package |curves| that is intended to draw almost
-% anything by using little dots or other symbols partially superimposed
-% to one another. It uses only quadratic Bézier curves and the curve
-% tracing is eased by specifying only the curve nodes, without specifying
-% the control nodes; with a suitable option to the package call it is
-% possible to reduce the memory usage by using short straight segments
-% drawn with the PostScript facilities offered by the |dvips| driver.
-%
-% Another package |ebezier| performs about the same as |curve2e| but
-% draws its Bézier curves by using little dots partially superimposed to
-% one another. The documentation is quite interesting since it
-% explains very clearly what exactly are the Bézier splines. Apparently
-% |ebezier| should be used only for DVI output without recourse to
-% PostScript or PDF machinery.
-%
-% The |picture| package extends the performance of the |picture|
-% environment (extended with \texttt{pict2e}) by accepting coordinates
-% and lengths in real absolute dimensions, not only as multiples of
-% |\unitlength|; it provides commands to extend that functionality to
-% other packages. In certain circumstances it is very useful.
-%
-% Package \texttt{xpicture} builds over the |picture| \LaTeX\ environment
-% so as to allow to draw the usual curves that are part of an
-% introductory analytic geometry course; lines, circles, parabolas,
-% ellipses, hyperbolas, and polynomials; the syntax is very comfortable;
-% for all these curves it uses the quadratic Bézier splines.
-% 
-% Package |hobby| extends the cubic Bézier spline handling with the
-% algorithms John Hobby created for \MF\ and \MP. But by now this package
-% interfaces very well with |tikz|; it has not (yet) been adapted to the
-% common |picture| environment, even when extended with |pict2e|, and,
-% why not, with |curve2e|.
 %
 %^^A%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 % \section{Acknowledgements}
@@ -1499,7 +469,7 @@ README.txt and curve2e-v161.sty.
 % in the previous version of this package, although the macro used by
 % Josef was slightly  different. Both versions aim/aimed at a better
 % accuracy and at widening the operand ranges. In this version we
-% abandoned the long division macro, and substituted it with the
+% abandoned our long division macro, and substituted it with the
 % floating point division provided by the |xfp| package.
 %
 % Daniele Degiorgi spotted a fault in the kernel definition of
@@ -1510,8 +480,8 @@ README.txt and curve2e-v161.sty.
 % crucial modification in order to have \texttt{curve2e} work smoothly
 % also with XeTeX (XeLaTeX). Actually if |pict2e|, version 0.2x or later,
 % dated 2009/08/05  or later, is being used, such modification is not
-% necessary any more, but it's true that it becomes imperative if older
-% versions are used.
+% necessary any more, but it's true that it becomes imperative when older
+% versions were used.
 %
 % \StopEventually{%
 % \begin{thebibliography}{9}
@@ -1876,38 +846,33 @@ README.txt and curve2e-v161.sty.
 % distance is nominal in the sense that it is recalculated in such a way
 % that the first and last dots coincide with the line end points.
 % Again if the second point coordinates are in polar form they are
-% considered as relative to the first point. The syntax is as follows:
+% considered as relative to the first point.Since the dots must emerge
+% from the background of the drawing they should not be too small; they
+% must be seen; therefore their diameter cannot  be tied to the unit
+% length of the particular drawing, but must have at visible size; by
+% default it is set to $0.5\,\mathrm{mm}$ (about 20 mills, in US units)
+% but through an optional argument to the macro, it may be set to any
+% desired size; remember that 1\,pt is about one third of a millimeter;
+% sometimes it might be too small; 1\,mm is a vary black dot, therefore
+% the user must pay attention when s/he specifies the dot diameter,
+% so as not to exaggerate in either direction.
+% The syntax is as follows:
 %\begin{flushleft}
-%\cs{Dotline}\parg{start point}\parg{end point}\marg{dot distance}
+%\cs{Dotline}\parg{start point}\parg{end point}\marg{dot distance}\oarg{diameter}
 %\end{flushleft}
 %    \begin{macrocode}
 \ifx\Dotline\undefined
-  \def\Dotline{\@ifstar{\Dotline@}{\Dotline@}}% backwards compatibility
-  \def\Dotline@(#1)(#2)#3{\put(#1){%
-  \IsPolar#2:?{%                    Polar
-     \Dotline@@(0,0)(#2){#3}}
-   {%                               Cartesian
-   \CopyVect#1to\V@ttA
-   \CopyVect#2to\V@ttB 
-   \SubVect\V@ttA from\V@ttB to\V@ttC 
-   \Dotline@@(0,0)(\V@ttC){#3}}%
-   }}
-
-  \def\Dotline@@(#1)(#2)#3{%
-   \countdef\NumA 3254\relax 
-   \countdef\NumB 3255\relax
-   \CopyVect#1to\V@ttA 
-   \CopyVect#2to\V@ttB 
-   \SubVect\V@ttA from\V@ttB to\V@ttC
-   \ModOfVect\V@ttC to\DotlineMod
-   \DivideFN\DotlineMod by#3 to\NumD 
-   \NumA=\fpeval{trunc(\NumD,0)}\relax
-   \Divvect{\V@ttC}{\NumA,0}\V@ttB
-   \advance\NumA\@ne 
-   \put(\V@ttA){\multiput(0,0)(\V@ttB){\NumA}{\makebox(0,0)%
-               {\circle*{0.5}}}}
-   \ignorespaces
-  }%
+  \providecommand\Dotline{}
+  \RenewDocumentCommand\Dotline{R(){0,0} R(){1,0} m O{1mm}}{%
+  \put(#1){\edef\Diam{\fpeval{{#4}/\unitlength}}%
+  \IsPolar#2:?{\CopyVect#2to\DirDot}%
+              {\SubVect#1from#2to\DirDot}%
+  \countdef\NumA=3254\relax 
+  \ModAndAngleOfVect\DirDot to\ModDirDot and\AngDirDot
+  \edef\NumA{\fpeval{trunc(\ModDirDot/{#3},0)}}%
+  \edef\ModDirDot{\fpeval{\ModDirDot/\NumA}}%
+  \multiput(0,0)(\AngDirDot:\ModDirDot){\inteval{\NumA+1}}%
+    {\makebox(0,0){\circle*{\Diam}}}}\ignorespaces}
 \fi
 %    \end{macrocode}
 %
@@ -4105,19 +3070,22 @@ The package bundle curve2e is composed of the following files
 curve2e.dtx
 curve2e.pdf
 README.txt
-ltxdoc.cfg
+curve2e-manual.tex
+curve2e-manual.pdf
 
 curve2e.dtx is the documented TeX source file of file curve2e.sty; you
 get curve2e.sty, curve2e.pdf, and curve2e-v161.sty by running pdflatex 
-on curve2e.dtx. The ltxdoc.cfg file customises the way the documentation 
-file is typeset. This specific .cfg file is part of the ltxdoc package 
-functionality and it is supposed to be configured for each specific 
-other bundle.
+on curve2e.dtx. The curve2e-manual files contain the user manual; in 
+this way the long preliminary descriptive part has been transferred to 
+a shorter dedicated file, and the “normal” user should have enough 
+information to use the package. Th curve2e.pdf file, extracted from 
+the .dtx one, contains the code documentation and is intended for the developers, or for the curious advanced users.
 
 README.txt, this file, contains general information.
 
-Curve2e-v161.sty contains a previous version of the package; see below
-why the older version might become necessary for the end user.
+This bundle contains also package curve2e-v161.sty that is a previous 
+version of this package; see below why the older version might become 
+necessary to the end user.
 
 Curve2e.sty is an extension of the package pict2e.sty which extends the
 standard picture LaTeX environment according to what Leslie Lamport
@@ -4127,22 +3095,25 @@ This further extension curve2e.sty allows to draw lines and vectors
 with any non integer slope parameters, to draw dashed lines of any 
 slope, to draw arcs and curved vectors, to draw curves where just 
 the interpolating nodes are specified together with the slopes at 
-the nodes; closed paths of any shape can be filled with color; all 
+such nodes; closed paths of any shape can be filled with color; all 
 coordinates are treated as ordered pairs, i.e. 'complex numbers'; 
-coordinates may be expressed also in polar form. Coordinates may be specified with macros, so that editing any drawing is rendered much simpler: any point specified with a macro is modified only once in the macro definition.
+coordinates may be expressed also in polar form. Coordinates may be 
+specified with macros, so that editing any drawing is rendered much 
+simpler: any point specified with a macro is modified only once in 
+its macro definition.
 Some of these features have been incorporated in the 2011 version of
 pict2e; therefore this package avoids any modification to the original
 pict2e commands.
 
 Curve2e now accepts polar coordinates in addition to the usual cartesian
-ones; several macros have been upgraded and a new macro for tracing cubic
+ones; several macros have been upgraded; a new macro for tracing cubic
 Bezier splines with their control nodes specified in polar form is
 available. The same applies to quadratic Bezier splines. The multiput
-command has been completely modified in a backwards compatible way, as
-to manipulate the increment components in a configurable way. A new 
-xmultiput command has been defined that is more configurable than the 
-original one; both \multiput and \xmultiput are backwards compatible with 
-the original picture environment definition.
+command has been completely modified in a backwards compatible way; the
+new version allows to manipulate the increment components in a configurable 
+way. A new xmultiput command has been defined that is more configurable 
+than the original one; both \multiput and \xmultiput are backwards 
+compatible with the original picture environment definition.
 
 This version solves a conflict with package eso-pic.
 
@@ -4155,25 +3126,27 @@ If you specify
 
 the package pict2e is automatically invoked with the specified options.
 
-The -almost compatible- frase is necessary to explain that this version
-of curve2e uses some `functions' of the LaTeX3 language that were made
-available to the LaTeX developers by mid October 2018. Should the user
+The -almost fully compatible- phrase is necessary to explain that this 
+version of curve2e uses some `functions' of the LaTeX3 language that were 
+made available to the LaTeX developers by mid October 2018. Should the user
 have an older or a basic/incomplete installation of the TeX system,
 such L3 functions might not be available. This is why this
 package checks the presence of the developer interface; in case
-such interface is not available it falls back to the previous version
-renamed curve2e-v161.sty, which is part of this bundle; this order 
+such interface is not available it rolls back to the previous version
+renamed curve2e-v161.sty, which is part of this bundle; this other 
 package name must not be modified in any way. The compatibility mentioned 
 above implies that the user macros remain the same, but their 
-implementation requires the L3 interface.
+implementation requires the L3 interface. Some macros and environments 
+rely totally on the xfp package functionalities, but legacy documents 
+source files should compile correctly.
 
-The package has the LPPL status of author maintained.
+The package has the LPPL status of maintained.
 
 According to the LPPL licence, you are entitled to modify this package,
 as long as you fulfil the few conditions set forth by the Licence.
 
-Nevertheless this package is an extension to the standard LaTeX package
-pict2e (2014). Therefore  any change must be controlled on the
+Nevertheless this package is an extension to the standard LaTeX
+pict2e (2014) package. Therefore any change must be controlled on the
 parent package pict2e, so as to avoid redefining or interfering with
 what is already contained in the official package.
 
diff --git a/Master/texmf-dist/source/latex/curve2e/ltxdoc.cfg b/Master/texmf-dist/source/latex/curve2e/ltxdoc.cfg
deleted file mode 100644
index 3593bb1e5fa..00000000000
--- a/Master/texmf-dist/source/latex/curve2e/ltxdoc.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-%%
-%% This is file `ltxdoc.cfg',
-
-\AtBeginDocument{\OnlyDescription}
- 
-%%
-%% End of file `ltxdoc.cfg'.
diff --git a/Master/texmf-dist/tex/latex/curve2e/curve2e-v161.sty b/Master/texmf-dist/tex/latex/curve2e/curve2e-v161.sty
index b2aae70aace..3c70a476206 100644
--- a/Master/texmf-dist/tex/latex/curve2e/curve2e-v161.sty
+++ b/Master/texmf-dist/tex/latex/curve2e/curve2e-v161.sty
@@ -9,9 +9,6 @@
 %%   Copyright (C)  2005--2020 Claudio Beccari  all rights reserved.
 %%   License information appended
 %% 
-
-
-
 \NeedsTeXFormat{LaTeX2e}[2016/01/01]
 \ProvidesPackage{curve2e-v161}%
         [2019/02/07 v.1.61 Extension package for pict2e]
@@ -889,12 +886,11 @@
 
 
 %% 
-%% 
 %% Distributable under the LaTeX Project Public License,
 %% version 1.3c or higher (your choice). The latest version of
 %% this license is at: http://www.latex-project.org/lppl.txt
 %% 
-%% This work is "author-maintained"
+%% This work is "maintained"
 %% 
 %% This work consists of file curve2e.dtx, and the derived files
 %% curve2e.sty and curve2e.pdf, plus the auxiliary derived files
diff --git a/Master/texmf-dist/tex/latex/curve2e/curve2e.sty b/Master/texmf-dist/tex/latex/curve2e/curve2e.sty
index 878e6610710..e725c0ad49b 100644
--- a/Master/texmf-dist/tex/latex/curve2e/curve2e.sty
+++ b/Master/texmf-dist/tex/latex/curve2e/curve2e.sty
@@ -11,10 +11,7 @@
 %% 
 \NeedsTeXFormat{LaTeX2e}[2019/01/01]
 \ProvidesPackage{curve2e}%
-        [2020-01-05 v.2.0.8 Extension package for pict2e]
-
-
-
+        [2020-01-18 v.2.2.0 Extension package for pict2e]
 \IfFileExists{xfp.sty}{%
   \RequirePackage{color}
   \RequirePackageWithOptions{pict2e}[2014/01/01]
@@ -127,32 +124,17 @@
    \ignorespaces}
 \fi
 \ifx\Dotline\undefined
-  \def\Dotline{\@ifstar{\Dotline@}{\Dotline@}}% backwards compatibility
-  \def\Dotline@(#1)(#2)#3{\put(#1){%
-  \IsPolar#2:?{%                    Polar
-     \Dotline@@(0,0)(#2){#3}}
-   {%                               Cartesian
-   \CopyVect#1to\V@ttA
-   \CopyVect#2to\V@ttB
-   \SubVect\V@ttA from\V@ttB to\V@ttC
-   \Dotline@@(0,0)(\V@ttC){#3}}%
-   }}
-
-  \def\Dotline@@(#1)(#2)#3{%
-   \countdef\NumA 3254\relax
-   \countdef\NumB 3255\relax
-   \CopyVect#1to\V@ttA
-   \CopyVect#2to\V@ttB
-   \SubVect\V@ttA from\V@ttB to\V@ttC
-   \ModOfVect\V@ttC to\DotlineMod
-   \DivideFN\DotlineMod by#3 to\NumD
-   \NumA=\fpeval{trunc(\NumD,0)}\relax
-   \Divvect{\V@ttC}{\NumA,0}\V@ttB
-   \advance\NumA\@ne
-   \put(\V@ttA){\multiput(0,0)(\V@ttB){\NumA}{\makebox(0,0)%
-               {\circle*{0.5}}}}
-   \ignorespaces
-  }%
+  \providecommand\Dotline{}
+  \RenewDocumentCommand\Dotline{R(){0,0} R(){1,0} m O{1mm}}{%
+  \put(#1){\edef\Diam{\fpeval{{#4}/\unitlength}}%
+  \IsPolar#2:?{\CopyVect#2to\DirDot}%
+              {\SubVect#1from#2to\DirDot}%
+  \countdef\NumA=3254\relax
+  \ModAndAngleOfVect\DirDot to\ModDirDot and\AngDirDot
+  \edef\NumA{\fpeval{trunc(\ModDirDot/{#3},0)}}%
+  \edef\ModDirDot{\fpeval{\ModDirDot/\NumA}}%
+  \multiput(0,0)(\AngDirDot:\ModDirDot){\inteval{\NumA+1}}%
+    {\makebox(0,0){\circle*{\Diam}}}}\ignorespaces}
 \fi
 \AtBeginDocument{\@ifpackageloaded{eso-pic}{%
 \renewcommand\LenToUnit[1]{\strip@pt\dimexpr#1*\p@/\unitlength}}{}}%
@@ -762,12 +744,11 @@
 \ignorespaces}
 
 %% 
-%% 
 %% Distributable under the LaTeX Project Public License,
 %% version 1.3c or higher (your choice). The latest version of
 %% this license is at: http://www.latex-project.org/lppl.txt
 %% 
-%% This work is "author-maintained"
+%% This work is "maintained"
 %% 
 %% This work consists of file curve2e.dtx, and the derived files
 %% curve2e.sty and curve2e.pdf, plus the auxiliary derived files