dashrule update (28apr08)

git-svn-id: svn://tug.org/texlive/trunk@7721 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 195 insertions, 168 deletions

diff --git a/Master/texmf-dist/doc/latex/dashrule/README b/Master/texmf-dist/doc/latex/dashrule/README
index 98997944b48..ab6b47ae490 100644
--- a/Master/texmf-dist/doc/latex/dashrule/README
+++ b/Master/texmf-dist/doc/latex/dashrule/README
@@ -1,7 +1,8 @@
-                  +-------------------------------+
-                  |DASHRULE: Dashed rules in LaTeX|
-                  | By Scott Pakin, pakin@uiuc.edu|
-                  +-------------------------------+
+               +--------------------------------------+
+               |   DASHRULE: Dashed rules in LaTeX    |
+               | By Scott Pakin, scott+dash@pakin.org |
+               +--------------------------------------+
+
 
 Description
 -----------
@@ -34,14 +35,15 @@ information on installing packages.
 
 Copyright and license
 ---------------------
-Copyright (C) 2001 Scott Pakin, pakin@uiuc.edu
+
+Copyright (C) 2008 Scott Pakin, scott+dash@pakin.org
 
 This package may be distributed and/or modified under the conditions
-of the LaTeX Project Public License, either version 1.2 of this
+of the LaTeX Project Public License, either version 1.3c of this
 license or (at your option) any later version.  The latest version of
 this license is in:
 
     http://www.latex-project.org/lppl.txt
 
-and version 1.2 or later is part of all distributions of LaTeX version
-1999/12/01 or later.
+and version 1.3c or later is part of all distributions of LaTeX version
+2006/05/20 or later.
diff --git a/Master/texmf-dist/doc/latex/dashrule/dashrule.pdf b/Master/texmf-dist/doc/latex/dashrule/dashrule.pdf
new file mode 100644
index 00000000000..8d7a89c0475
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/dashrule/dashrule.pdf
diff --git a/Master/texmf-dist/source/latex/dashrule/dashrule.dtx b/Master/texmf-dist/source/latex/dashrule/dashrule.dtx
index a29bed1652b..1e5b1470e7e 100644
--- a/Master/texmf-dist/source/latex/dashrule/dashrule.dtx
+++ b/Master/texmf-dist/source/latex/dashrule/dashrule.dtx
@@ -1,93 +1,102 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
+% Copyright (C) 2004 by Scott Pakin <scott+dash@pakin.org>
 % -------------------------------------------------------
 %
-% This package may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.2
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
 % of this license or (at your option) any later version.
-% The latest version of this license is in
+% The latest version of this license is in:
+%
 %    http://www.latex-project.org/lppl.txt
-% and version 1.2 or later is part of all distributions of LaTeX
-% version 1999/12/01 or later.
+%
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2006/05/20 or later.
 %
 % \fi
-% \iffalse
-%% File: dashrule.dtx Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
 %
-%<package>\NeedsTeXFormat{LaTeX2e}
+% \iffalse
+%<*driver>
+\ProvidesFile{dashrule.dtx}
+%</driver>
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
 %<package>\ProvidesPackage{dashrule}
-%<package>         [2001/04/23 v1.00 Dashed rules (SDP)]
+%<*package>
+    [2008/04/27 v1.1 Dashed rules]
+%</package>
 %
 %<*driver>
 \documentclass{ltxdoc}
-\usepackage{dashrule}
+\usepackage{dashrule}[2008/04/27]
+\usepackage{titlesec}
 \EnableCrossrefs
 \CodelineIndex
-
-% Uncomment the following line if you don't want to include a
-% source-code listing.
-%\OnlyDescription
-
+\RecordChanges
 \begin{document}
-\DocInput{dashrule.dtx}
+  \DocInput{dashrule.dtx}
+  \PrintChanges
+  \PrintIndex
 \end{document}
 %</driver>
 % \fi
 %
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \CheckSum{62}
 %
-% \CheckSum{61}
-% \GetFileInfo{dashrule.sty}
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
 %
-% \title{The \textsf{dashrule} package\thanks{This file
-%         has version number \fileversion, last
-%         revised \filedate.}}
-% \author{Scott Pakin\\pakin@uiuc.edu}
-% \date{\filedate}
-% \maketitle
 %
-% \changes{v1.00}{2001/04/23}{Initial version}
+% \changes{v1.0}{2001/04/23}{Initial version}
 %
-% \DoNotIndex{\csname,\DeclareRobustCommand,\def,\else,\endcsname}
-% \DoNotIndex{\expandafter,\fi,\ifodd,\ifx,\let,\newcounter,\relax}
+% \GetFileInfo{dashrule.dtx}
 %
-% \StopEventually{^^A
-%   \bigskip\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
-%   \section{Future Work}
+% \DoNotIndex{\addtocounter,\csname,\DeclareRobustCommand,\def,\else,\empty}
+% \DoNotIndex{\endcsname,\expandafter,\fi,\hbox,\hskip,\hspace,\ifodd,\ifx}
+% \DoNotIndex{\let,\mbox,\newcounter,\relax,\setcounter}
 %
-%    \textsf{dashrule} \fileversion{} supports only horizontally dashed
-%    rules.  Future versions (if any) may support vertically dashed
-%    rules, as well.  For the time being, the \textsf{graphicx}
-%    package's \texttt{\string\rotatebox} can be used to define a
-%    \texttt{\string\vdashrule} in terms of a rotated
-%    \texttt{\string\hdashrule}.
-%
-%    The next logical step after adding a \texttt{\string\vdashrule} is
-%    to support dashed rectangles, which would be composed of
-%    \texttt{\string\hdashrule}s and \texttt{\string\vdashrule}s.  Other
-%    possible enhancements would be a way of drawing dotted lines,
-%    presumably composed from the limited set of circle characters
-%    available in \LaTeX's fonts.
-%
-%   \bigskip\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
-%   \PrintIndex
-% }
+% ^^A  Precede every section title with a dashed rule.
+% \titleformat{\section}
+%   {\unskip\vskip 2.3ex plus 0.2ex
+%    \vbox{\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}}
+%    \vskip 2.3ex plus 0.2ex}
+%   {\normalfont\Large\bfseries\thesection}
+%   {1em}
+%   {\normalfont\Large\bfseries}
+%
+%
+% \title{The \textsf{dashrule} package\thanks{This document
+%   corresponds to \textsf{dashrule}~\fileversion, dated \filedate.}}
+% \author{Scott Pakin \\ \texttt{scott+dash@pakin.org}}
+%
+% \maketitle
 %
 % \begin{abstract}
-%     The \textsf{dashrule} package makes it easy to draw a huge variety
-%     of dashed rules (i.e., lines) in \LaTeX.  \textsf{dashrule} provides a
-%     command, |\hdashrule|, which is a cross between \LaTeX's |\rule| and
-%     PostScript's |setdash| command.  |\hdashrule| draws horizontally
-%     dashed rules using the same syntax as |\rule|, but with an
-%     additional, |setdash|-like parameter that specifies the pattern of
-%     dash segments and the space between those segments.  Because
-%     \textsf{dashrule}'s rules are constructed internally using |\rule|
-%     (as opposed to, e.g., PostScript |\special|s) they are fully
-%     compatible with every \LaTeX{} back-end processor.
+%   The \textsf{dashrule} package makes it easy to draw a huge variety
+%   of dashed rules (i.e., lines) in \LaTeX.  \textsf{dashrule} provides
+%   a command, |\hdashrule|, which is a cross between \LaTeX's |\rule|
+%   and PostScript's |setdash| command.  |\hdashrule| draws horizontally
+%   dashed rules using the same syntax as |\rule| but with an
+%   additional, |setdash|-like parameter that specifies the pattern of
+%   dash segments and the space between those segments.  Because
+%   \textsf{dashrule}'s rules are constructed internally using |\rule|
+%   (as opposed to, e.g., PostScript |\special|s) they are fully
+%   compatible with every \LaTeX{} back-end processor.
 % \end{abstract}
 %
-% \medskip\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
+%
 % \section{Usage}
 %
 % \DescribeMacro{\hdashrule}
@@ -105,24 +114,23 @@
 % \bigskip
 %
 % The \meta{raise}, \meta{width}, and \meta{height} parameters have the
-% same meaning as in \LaTeX's |\rule| macro: the distance to raise the rule
-% above the baseline and the width and height of the rule.
-%
-% \meta{leader} determines how the dash pattern should fill \meta{width}
-% amount of space.  Because |\hdashrule| is implemented in terms of \TeX's
-% leader commands, the dash pattern must be repeated an integral number of
-% times.  \meta{leader} determines what to do with the extra whitespace
-% (always less than the width of the dash pattern) that this requirement
-% introduces.  The default, which corresponds to \TeX's |\leaders|
-% command, adds space to both ends of the rule such that the dash patterns
-% from multiple |\hdashrule|s line up.  If \meta{leader} is~|c|, which
-% corresponds to \TeX's |\cleaders| command, an equal amount of whitespace
-% will be added to both ends of the rule.  If \meta{leader} is~|x|, which
-% corresponds to \TeX's |\xleaders| command, the whitespace will be
-% divided up, and the same amount of whitespace will separate each
-% repetition of the dash pattern.
-%
-% The \meta{dash} argument determines the dash pattern and is analogous
+% same meaning as in \LaTeX's |\rule| macro: the distance to raise the
+% rule above the baseline and the width and height of the rule.
+%
+% Because |\hdashrule| is implemented in terms of \TeX's primitive
+% leader commands (|\leaders|, |\cleaders|, and |\xleaders|), the dash
+% pattern must be repeated an integral number of times.  \meta{leader}
+% specifies what to do with the extra whitespace (always less than the
+% width of the dash pattern) that this requirement introduces.  The
+% default, which corresponds to \TeX's |\leaders| command, adds space to
+% both ends of the rule so the dash patterns from multiple |\hdashrule|s
+% line up.  If \meta{leader} is~|c|, which corresponds to \TeX's
+% |\cleaders| command, an equal amount of whitespace is added to both
+% ends of the rule.  If \meta{leader} is~|x|, which corresponds to
+% \TeX's |\xleaders| command, the whitespace is divided up, and the same
+% amount of whitespace separates each repetition of the dash pattern.
+%
+% The \meta{dash} argument specifies the dash pattern and is analogous
 % to the \textit{array} argument to PostScript's |setdash| function.
 % That is, it is a list of space-separated \meta{dimen}s that alternate
 % ``on'' and ``off'' distances.  For instance, ``|2pt 1pt|'' means a
@@ -133,12 +141,12 @@
 % gap, 3\,pt.\ rule, 1\,pt.\ gap, 2\,pt.\ rule, 3\,pt.\ gap.''
 %
 %
-% \bigskip\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
 % \section{Examples}
 %
 % The following are some typical ways to use |\hdashrule|.  Each example
 % changes from the previous in only one parameter.  For clarity,
-% underlines are used to indicate modified text.
+% underlines are used to indicate modified text, and the rule is
+% bracketed by an upper- and lowercase~``X''.
 %
 % \begin{center}
 % \renewcommand{\arraystretch}{1.5}
@@ -171,7 +179,7 @@
 % \bigskip
 % \noindent
 % These next examples show the effect of using different leader types.
-% Each leader is used in both a 4\,cm~wide rule and a 3\,cm~wide rule.
+% Each leader is used with both a 4\,cm~wide rule and a 3\,cm~wide rule.
 %
 % \begin{center}
 % \renewcommand{\arraystretch}{1.25}
@@ -201,10 +209,9 @@
 % rules in the second pair each have an equal amount of whitespace on
 % either side of the rule; and the rules in the third pair have extra
 % spaces within the dash pattern itself instead of around it.  The
-% |x|~qualifier is rarely useful for dashed rules, because it alters the
-% pattern itself.  (I included |x| for completeness, not practicality.)
-% However, |x| does enable rules with long dashes to better fill a
-% comparatively small width, as in the following example:
+% |x|~qualifier is rarely useful for dashed rules because it alters the
+% pattern itself.  However, |x| does enable rules with long dashes to
+% better fill a comparatively small width, as in the following example:
 %
 % \begin{center}
 % \renewcommand{\arraystretch}{1.25}
@@ -218,7 +225,7 @@
 % The gaps in the above are clearly wider than~|0pt|, but they \emph{are}
 % evenly spaced.
 %
-% \bigskip\noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
+%
 % \section{Differences from \texttt{setdash}}
 %
 % |\hdashrule| is different from PostScript's |setdash| command in the
@@ -230,8 +237,8 @@
 %   explicit units.
 %
 %   \item There is no equivalent of |setdash|'s \textit{offset}
-%   parameter, to specify a starting offset into the pattern.  If you're
-%   desperate, you can fake \textit{offset} with a leading |\rule| and
+%   parameter to specify a starting offset into the pattern.  If you're
+%   desperate you can fake \textit{offset} with a leading |\rule| and
 %   |\hspace|.
 %
 %   \item Unlike |setdash|, |\hdashrule| can't draw a solid line.  Use
@@ -239,7 +246,25 @@
 % \end{itemize}
 %
 %
-% \noindent\hdashrule[0pt][x]{\fill}{1pt}{5pt}\rule{5pt}{1pt}
+% \StopEventually{^^A
+%   \section{Future Work}
+%
+%   \textsf{dashrule} \fileversion{} supports only horizontally dashed
+%   rules.  Future versions (if any) may support vertically dashed rules
+%   as well.  For the time being, the \textsf{graphicx} package's
+%   \texttt{\string\rotatebox} can be used to define a
+%   \texttt{\string\vdashrule} in terms of a rotated
+%   \texttt{\string\hdashrule}.
+%
+%   The next logical step after adding a \texttt{\string\vdashrule} is
+%   to support dashed rectangles, which would be composed of
+%   \texttt{\string\hdashrule}s and \texttt{\string\vdashrule}s.  Other
+%   possible enhancements would be a way of drawing dotted lines,
+%   presumably composed from the limited set of circle characters
+%   available in \LaTeX's fonts.
+% }
+%
+%
 % \section{Implementation}
 %
 %    \begin{macrocode}
@@ -247,7 +272,7 @@
 %    \end{macrocode}
 %
 % \begin{macro}{\hdr@do@rule}
-% This macro is exactly like \LaTeX's |\rule|, except that the optional
+% This macro is exactly like \LaTeX's |\rule| except that the optional
 % argument is required, and it has the side effect of pointing
 % |\hdr@do@something| to |\hdr@do@skip|.
 %    \begin{macrocode}
@@ -285,7 +310,7 @@
   \ifx#1!%
   \else
     \addtocounter{hdr@segments}{1}%
-    \expandafter\hdr@tally@segments%
+    \expandafter\hdr@tally@segments
   \fi
 }
 %    \end{macrocode}
@@ -294,14 +319,17 @@
 %
 % \begin{macro}{\hdashrule}
 % This is the only macro in \textsf{dashrule}'s external interface.
-% |\hdashrule@ii| does all the work for |\hdashrule|, though.  All
+% (|\hdashrule@ii| does most of the work for |\hdashrule|, though.)  All
 % |\hdashrule| itself does is invoke |\hdashrule@i| with its first
-% optional argument, or~|0.0pt| if none was provided.  |\hdashrule@i|,
-% in turn, invokes |\hdashrule@ii| with the two optional arguments,
+% optional argument or~|0.0pt| if none was provided.  |\hdashrule@i|, in
+% turn, invokes |\hdashrule@ii| with the two optional arguments,
 % supplying |\empty| as the default value of the second optional
 % argument.
+% \changes{v1.1}{2008/04/27}{Preceded the invocation of
+%   \texttt{\string\string\string\@testopt} with an empty box so that
+%   \texttt{\string\string\string\hdashrule} can now begin a paragraph}
 %    \begin{macrocode}
-\DeclareRobustCommand{\hdashrule}{\@testopt{\hdashrule@i}{0pt}}
+\DeclareRobustCommand{\hdashrule}{\mbox{}\@testopt{\hdashrule@i}{0pt}}
 %    \end{macrocode}
 % \end{macro}
 %
@@ -324,11 +352,12 @@
 % \end{tabular}
 % \end{center}
 %
+% \noindent
 % The \meta{raise}, \meta{width}, and \meta{height} parameters have the
 % same meaning as in \LaTeX's |\rule| macro.  \meta{leader} specifies
-% which \TeX{} leader function to use to fill \meta{width} amount of
+% the \TeX\ leader function to use to fill \meta{width} amount of
 % space.  It should be |c| for |\cleaders|, |x| for |\xleaders|, or
-% nothing for ordinary |\leaders|.  The \meta{dash} argument determines
+% nothing for ordinary |\leaders|.  The \meta{dash} argument specifies
 % the dash pattern and is analogous to the \textit{array} argument to
 % PostScript's |setdash| function.  That is, it is a list of
 % space-separated \meta{dimen}s that alternate ``on'' and ``off''
@@ -356,11 +385,11 @@
     \ifx##1!%
     \else
       \hdr@do@something[#1]{##1}{#4}%
-      \expandafter\hdr@parse@dash%
+      \expandafter\hdr@parse@dash
     \fi
   }%
 %    \end{macrocode}
-% We now count the number of segments in the dash pattern, so we can
+% We now count the number of segments in the dash pattern so we can
 % determine if we have an even or odd number of them.
 %    \begin{macrocode}
   \setcounter{hdr@segments}{0}%
@@ -373,28 +402,24 @@
 % ``|1pt|'' is actually short for ``1\,pt.\ rule, 1\,pt.\ space,'' and
 % ``|2pt 4pt 6pt|'' is an abridged version of ``2\,pt.\ rule, 4\,pt.\
 % space, 6\,pt.\ rule, 2\,pt.\ space, 4\,pt.\ rule, 6\,pt.\ space.''
-% Although it is valid to repeat even-length patterns, as well---an
+% Although it is valid to repeat even-lengthed patterns as well---an
 % earlier draft of |\hdashrule@ii| did just that---this produces
-% inferior results, because \TeX's various leader commands do not split
-% boxes.  The longer the pattern, the less likely it will fit
-% snugly into the given width.
+% inferior results because \TeX's various leader commands do not split
+% boxes.  The longer the pattern, the less likely it will fit snugly
+% into the given width.
 %    \begin{macrocode}
   \ifodd\c@hdr@segments
-    \csname#2leaders\endcsname%
+    \csname#2leaders\endcsname
       \hbox{\hdr@parse@dash#5 #5 ! }%
       \hskip#3\relax
   \else
-    \csname#2leaders\endcsname%
+    \csname#2leaders\endcsname
       \hbox{\hdr@parse@dash#5 ! }%
       \hskip#3\relax
-  \fi%
+  \fi
 }
 %    \end{macrocode}
 % \end{macro}
 %
-%    \begin{macrocode}
-%</package>
-%    \end{macrocode}
-%
 % \Finale
-%
+\endinput
diff --git a/Master/texmf-dist/source/latex/dashrule/dashrule.ins b/Master/texmf-dist/source/latex/dashrule/dashrule.ins
index 21ddf0c4bf5..e5018aec9b6 100644
--- a/Master/texmf-dist/source/latex/dashrule/dashrule.ins
+++ b/Master/texmf-dist/source/latex/dashrule/dashrule.ins
@@ -1,23 +1,18 @@
 %%
-%% This file will generate fast loadable files and documentation
-%% driver files from the doc files in this package when run through
-%% LaTeX or TeX.
+%% Copyright (C) 2008 by Scott Pakin <scott+dash@pakin.org>
 %%
-%% Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-%% -------------------------------------------------------
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.3c of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
 %% 
-%% This package may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.2
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
 %%    http://www.latex-project.org/lppl.txt
-%% and version 1.2 or later is part of all distributions of LaTeX 
-%% version 1999/12/01 or later.
-%%
-%% --------------- start of docstrip commands ------------------
+%% 
+%% and version 1.3c or later is part of all distributions of LaTeX
+%% version 2006/05/20 or later.
 %%
-\input docstrip
 
+\input docstrip.tex
 \keepsilent
 
 \usedir{tex/latex/dashrule}
@@ -26,30 +21,35 @@
 
 This is a generated file.
 
-Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
--------------------------------------------------------
+Copyright (C) 2008 by Scott Pakin <scott+dash@pakin.org>
+
+This file may be distributed and/or modified under the conditions of
+the LaTeX Project Public License, either version 1.3c of this license
+or (at your option) any later version.  The latest version of this
+license is in:
 
-This package may be distributed and/or modified under the
-conditions of the LaTeX Project Public License, either version 1.2
-of this license or (at your option) any later version.
-The latest version of this license is in
    http://www.latex-project.org/lppl.txt
-and version 1.2 or later is part of all distributions of LaTeX 
-version 1999/12/01 or later.
+
+and version 1.3c or later is part of all distributions of LaTeX
+version 2006/05/20 or later.
 
 \endpreamble
 
 \generate{\file{dashrule.sty}{\from{dashrule.dtx}{package}}}
 
-\Msg{***********************************************************}
-\Msg{*}
-\Msg{* To finish the installation, you have to move}
-\Msg{* dashrule.sty into a directory searched by TeX.}
-\Msg{*}
-\Msg{* To produce the documentation, run dashrule.dtx}
-\Msg{* through LaTeX.}
-\Msg{*}
-\Msg{* Happy TeXing!}
-\Msg{***********************************************************}
+\obeyspaces
+\Msg{*************************************************************}
+\Msg{*                                                           *}
+\Msg{* To finish the installation you have to move the following *}
+\Msg{* file into a directory searched by TeX:                    *}
+\Msg{*                                                           *}
+\Msg{*     dashrule.sty                                          *}
+\Msg{*                                                           *}
+\Msg{* To produce the documentation run the file dashrule.dtx    *}
+\Msg{* through LaTeX.                                            *}
+\Msg{*                                                           *}
+\Msg{* Happy TeXing!                                             *}
+\Msg{*                                                           *}
+\Msg{*************************************************************}
 
 \endbatchfile
diff --git a/Master/texmf-dist/tex/latex/dashrule/dashrule.sty b/Master/texmf-dist/tex/latex/dashrule/dashrule.sty
index 826407dd13b..bc0d0919d0e 100644
--- a/Master/texmf-dist/tex/latex/dashrule/dashrule.sty
+++ b/Master/texmf-dist/tex/latex/dashrule/dashrule.sty
@@ -8,21 +8,21 @@
 %% 
 %% This is a generated file.
 %% 
-%% Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-%% -------------------------------------------------------
+%% Copyright (C) 2008 by Scott Pakin <scott+dash@pakin.org>
+%% 
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.3c of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
 %% 
-%% This package may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.2
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
 %%    http://www.latex-project.org/lppl.txt
-%% and version 1.2 or later is part of all distributions of LaTeX
-%% version 1999/12/01 or later.
 %% 
-%% File: dashrule.dtx Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-\NeedsTeXFormat{LaTeX2e}
+%% and version 1.3c or later is part of all distributions of LaTeX
+%% version 2006/05/20 or later.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
 \ProvidesPackage{dashrule}
-         [2001/04/23 v1.00 Dashed rules (SDP)]
+    [2008/04/27 v1.1 Dashed rules]
 \def\hdr@do@rule[#1]#2#3{%
   \rule[#1]{#2}{#3}%
   \let\hdr@do@something=\hdr@do@skip
@@ -36,10 +36,10 @@
   \ifx#1!%
   \else
     \addtocounter{hdr@segments}{1}%
-    \expandafter\hdr@tally@segments%
+    \expandafter\hdr@tally@segments
   \fi
 }
-\DeclareRobustCommand{\hdashrule}{\@testopt{\hdashrule@i}{0pt}}
+\DeclareRobustCommand{\hdashrule}{\mbox{}\@testopt{\hdashrule@i}{0pt}}
 \def\hdashrule@i[#1]{\@testopt{\hdashrule@ii[#1]}\empty}
 \def\hdashrule@ii[#1][#2]#3#4#5{%
   \let\hdr@do@something=\hdr@do@rule
@@ -47,20 +47,20 @@
     \ifx##1!%
     \else
       \hdr@do@something[#1]{##1}{#4}%
-      \expandafter\hdr@parse@dash%
+      \expandafter\hdr@parse@dash
     \fi
   }%
   \setcounter{hdr@segments}{0}%
   \hdr@tally@segments#5 !
   \ifodd\c@hdr@segments
-    \csname#2leaders\endcsname%
+    \csname#2leaders\endcsname
       \hbox{\hdr@parse@dash#5 #5 ! }%
       \hskip#3\relax
   \else
-    \csname#2leaders\endcsname%
+    \csname#2leaders\endcsname
       \hbox{\hdr@parse@dash#5 ! }%
       \hskip#3\relax
-  \fi%
+  \fi
 }
 \endinput
 %%