morefloats 2011/07/10, v1.0e

git-svn-id: svn://tug.org/texlive/trunk@23341 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 363 insertions, 504 deletions

diff --git a/Master/texmf-dist/doc/latex/morefloats/README b/Master/texmf-dist/doc/latex/morefloats/README
index 77265d5a00a..9ab2d6e3b43 100644
--- a/Master/texmf-dist/doc/latex/morefloats/README
+++ b/Master/texmf-dist/doc/latex/morefloats/README
@@ -1,4 +1,4 @@
-README for morefloats package, 2011/02/01, v1.0d
+README for morefloats package, 2011/07/10, v1.0e
 
 
 TABLE OF CONTENTS
@@ -24,13 +24,13 @@ float package, or \FloatBarrier from the picins package might help.
 
 Note: The main code of this package was invented by
 Don Hosek, Quixote, 1990/07/27 (Thanks!).
-Maintenace has been taken over in September 2010 by H.-Martin M\"{u}nch.
+Maintenance has been taken over in September 2010 by H.-Martin M\"{u}nch.
 
 
 2 DOWNLOAD
 ==========
 
-'morefloats' is available on CTAN:
+'morefloats' is available at CTAN:
   CTAN:macros/latex/contrib/morefloats/
 
 Also a ZIP file is provided that contains the files, already
@@ -76,8 +76,8 @@ b) Check for old morefloats.sty at other locations in your
     but in a way TeX does NOT find them automatically).
 c) Generate the package and driver files from the download:
      tex morefloats.ins
-d) Install the files '*.sty', and '*.cfg' in your TDS tree:
-     cp *.sty *.cfg TDS:tex/latex/morefloats/
+d) Install the file '*.sty' in your TDS tree:
+     cp *.sty TDS:tex/latex/morefloats/
    Replace 'TDS:' by the prefix of your TDS tree
    (texmf directory).
 e) Copy the documentation files to
@@ -94,7 +94,7 @@ morefloats itself loads the kvoptions package,
     CTAN:macros/latex/contrib/oberdiek/kvoptions.dtx
 which again loads other packages
 (see the result of the \listfiles command in the log-file
- of morefloatsexample.tex).
+ of morefloats-example.tex).
 For unpacking and constructing the documentation
 morefloats.dtx needs additional packages,
 see "6.1 Downloads" in the manual,
@@ -105,7 +105,7 @@ tex-archive/macros/latex/contrib/morefloats/morefloats.pdf
 5 PACKAGE COMPATIBILITY
 =======================
 
-There are no known incompatibilities (yet).
+There are no known incompatibilities.
 
 6 AUTHOR/MAINTAINER
 =====================
@@ -123,13 +123,13 @@ A bug report should contain:
 * Comprehensive problem description. This includes error or
   warning messages.
   * \errorcontextlines=\maxdimen can be added in the
-    TeX code to get more informations in TeX error messages.
+    TeX code to get more information in TeX error messages.
 * Minimal test file that shows the problem, but does not
   contain any unnecessary packages and code.
 * Used drivers/programs.
 * Version information about used packages and programs.
   * If you are using LaTeX, then add "\listfiles". Then
-    a list of version informations is printed at the end
+    a list of version information is printed at the end
     of the LaTeX run.
 * Please no other files than the minimal test file.
   The other files .log, .dvi, .ps, .pdf are seldom
@@ -146,5 +146,5 @@ Bug reports can be send to the maintainer:
 8 KNOWN PROBLEMS
 =================
 
-* If you request too much floats, (La)TeX will run out of
+* If you request too many floats, (La)TeX will run out of
    dimensions, memory,...
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/morefloats/morefloats-example.pdf b/Master/texmf-dist/doc/latex/morefloats/morefloats-example.pdf
index 0e568d6e0c7..f4df41e5e19 100644
--- a/Master/texmf-dist/doc/latex/morefloats/morefloats-example.pdf
+++ b/Master/texmf-dist/doc/latex/morefloats/morefloats-example.pdf
diff --git a/Master/texmf-dist/doc/latex/morefloats/morefloats-example.tex b/Master/texmf-dist/doc/latex/morefloats/morefloats-example.tex
index 589468e4be8..2e739a7c823 100644
--- a/Master/texmf-dist/doc/latex/morefloats/morefloats-example.tex
+++ b/Master/texmf-dist/doc/latex/morefloats/morefloats-example.tex
@@ -8,8 +8,14 @@
 %% 
 %% This is a generated file.
 %% 
-%% IMPORTANT NOTICE:
-%% The usual disclaimers apply:
+%% Project: morefloats
+%% Version: 2011/07/10 v1.0e
+%% 
+%% Copyright (C) 2010, 2011 by
+%%     H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+%% Portions of code copyrighted by other people as marked.
+%% 
+%% The usual disclaimer applys:
 %% If it doesn't work right that's your problem.
 %% (Nevertheless, send an e-mail to the maintainer
 %%  when you find an error in this package.)
@@ -26,21 +32,19 @@
 %% 
 %% This work has the LPPL maintenance status "maintained".
 %% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
+%% The Current Maintainer of this work is H.-Martin Muench.
 %% The main code of this package was invented by
 %% Don Hosek, Quixote 1990/07/27 (Thanks!).
 %% Maintenance has been taken over in September 2010 by H.-Martin M{\accent "7F u}nch.
 %% 
 %% This work consists of the main source file morefloats.dtx
 %% and the derived files
-%%    morefloats.sty, morefloats.ins, morefloats.drv,
-%%    morefloats-example.tex, morefloats.pdf.
+%%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+%%    morefloats-example.tex.
 %% 
-\documentclass[british]{article}
+\documentclass[british]{article}[2007/10/19]% v1.4h
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\usepackage[maxfloats=19]{morefloats}[2011/02/01]% v1.0d
+\usepackage[maxfloats=19]{morefloats}[2011/07/10]% v1.0e
 \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}%
 \listfiles
 \begin{document}
@@ -49,14 +53,15 @@
 \markboth{Example for morefloats}{Example for morefloats}
 
 This example demonstrates the use of package\newline
-\textsf{morefloats}, v1.0d as of 2011/02/01 (HMM; DH).\newline
-The package takes options (here: maxfloats=19 is used).\newline
+\textsf{morefloats}, v1.0e as of 2011/07/10 (HMM; DH).\newline
+The package takes options (here: \verb|maxfloats=19| is used).\newline
 For more details please see the documentation!\newline
 
 To reproduce the\newline
 \texttt{\LaTeX\ Error: Too many unprocessed floats},\newline
-comment out the \texttt{\textbackslash usepackage...} in the preamble
-(line~3) (by placing a \%\ before it).\newline
+comment out the \verb|\usepackage...| in the preamble
+(line~3)\newline
+(by placing a \%\ before it).\newline
 
 \bigskip
 
@@ -65,9 +70,13 @@ and $2\unit{g}$~wood:\newline
 Therefore please print only if this is really necessary.\newline
 I do NOT think, that it is necessary to print THIS file, really!
 
+\bigskip
+
+There follow a lot of floating tables.
+
 \pagebreak
 
-Here are a lot of floating tables:\newline
+Here are a lot of floating tables.\newline
 
 \begin{table}[t] \centering%
 \begin{tabular}{|l|}
@@ -216,7 +225,7 @@ A table, which will keep floating.\\ \hline
 \begin{table}[t] \centering%
 \begin{tabular}{|l|}
 \hline
-One floating table too much
+One floating table too many
 (without \textsf{morefloats} and appropriate option(s)).\\ \hline
 \end{tabular}%
 \caption{The nineteenth Table}%
diff --git a/Master/texmf-dist/doc/latex/morefloats/morefloats.pdf b/Master/texmf-dist/doc/latex/morefloats/morefloats.pdf
index 7cce12624b0..bbf88acbb21 100644
--- a/Master/texmf-dist/doc/latex/morefloats/morefloats.pdf
+++ b/Master/texmf-dist/doc/latex/morefloats/morefloats.pdf
diff --git a/Master/texmf-dist/source/latex/morefloats/ltxdoc.cfg b/Master/texmf-dist/source/latex/morefloats/ltxdoc.cfg
deleted file mode 100644
index 3a3fe10a1ba..00000000000
--- a/Master/texmf-dist/source/latex/morefloats/ltxdoc.cfg
+++ /dev/null
@@ -1,105 +0,0 @@
-%%
-%% This is file `ltxdoc.cfg',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% morefloats.dtx  (with options: `ltxdoc')
-%% 
-%% This is a generated file.
-%% 
-%% IMPORTANT NOTICE:
-%% The usual disclaimers apply:
-%% If it doesn't work right that's your problem.
-%% (Nevertheless, send an e-mail to the maintainer
-%%  when you find an error in this package.)
-%% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either
-%% version 1.3c of this license or (at your option) any later
-%% version. This version of this license is in
-%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
-%% and the latest version of this license is in
-%%    http://www.latex-project.org/lppl.txt
-%% and version 1.3c or later is part of all distributions of
-%% LaTeX version 2005/12/01 or later.
-%% 
-%% This work has the LPPL maintenance status "maintained".
-%% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
-%% The main code of this package was invented by
-%% Don Hosek, Quixote 1990/07/27 (Thanks!).
-%% Maintenance has been taken over in September 2010 by H.-Martin M{\accent "7F u}nch.
-%% 
-%% This work consists of the main source file morefloats.dtx
-%% and the derived files
-%%    morefloats.sty, morefloats.ins, morefloats.drv,
-%%    morefloats-example.tex, morefloats.pdf.
-%% 
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesFile{ltxdoc.cfg}[2010/06/01 v1.0 configuration file for morefloats (HMM)]
-  %% Code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)],  %%
-  % copyrighted 2006, 2007 Heiko Oberdiek, part of project `latex-tds'.
-  % That file may be distributed and/or modified under the
-  % conditions of the LaTeX Project Public License, either version 1.3
-  % of this license or (at your option) any later version.
-  % The latest version of this license is in
-  %   http://www.latex-project.org/lppl.txt
-  % and version 1.3c or later is part of all distributions of LaTeX
-  % version 2005/12/01 or later.
-  % That work has the LPPL maintenance status `maintained'.
-  % The Current Maintainer of that work is Heiko Oberdiek.
-  %
-  \PassOptionsToClass{a4paper}{article}
-  \AtEndOfClass{%
-    \RequirePackage[numbered]{hypdoc}[2010/03/26]% v1.9
-    \pdfstringdefDisableCommands{%
-      \let\env\relax % longtable.dtx
-      \let\mytt\relax % tabularx.dtx
-    }%
-    \addtolength{\topmargin}{-10mm}%
-    \addtolength{\textheight}{20mm}%
-    % Depending on the page style, the head or foot area
-    % are put into the text area.
-    % Usually the page style is the default "plain".
-    % tools/verbatim.dtx uses "myheadings".
-    \def\string@plain{plain}%
-    \def\string@myheadings{myheadings}%
-    \def\current@pagestyle{plain}%
-    \let\ltxdoc@cfg@pagestyle\pagestyle
-    \def\pagestyle#1{%
-      \def\current@pagestyle{#1}%
-      \ltxdoc@cfg@pagestyle{#1}%
-    }%
-    \edef\ltxdoc@cfg@jobname{\jobname}%
-    \def\ltxdoc@cfg@longtable{longtable}%
-    \@onelevel@sanitize\ltxdoc@cfg@longtable
-    \ifx\ltxdoc@cfg@jobname\ltxdoc@cfg@longtable
-      \def\current@pagestyle{both}%
-    \fi
-    \let\ltxdoc@cfg@document\document
-    \def\document{%
-      \ifx\current@pagestyle\string@plain
-        \addtolength{\textheight}{\headheight}%
-        \addtolength{\textheight}{\headsep}%
-        \setlength{\headheight}{0pt}%
-        \setlength{\headsep}{0pt}%
-        \global\textheight\textheight
-        \global\headheight\headheight
-        \global\headsep\headsep
-      \fi
-      \ifx\current@pagestyle\string@myheadings
-        \addtolength{\textheight}{\footskip}%
-        \global\textheight\textheight
-      \fi
-      \ltxdoc@cfg@document
-    }%
-  %% End of code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)]  %%
-  %% Place additional code here.  %%
-  }
-
-\endinput
-%%
-%% End of file `ltxdoc.cfg'.
diff --git a/Master/texmf-dist/source/latex/morefloats/morefloats.drv b/Master/texmf-dist/source/latex/morefloats/morefloats.drv
index 616659ecec6..826bff8b9e9 100644
--- a/Master/texmf-dist/source/latex/morefloats/morefloats.drv
+++ b/Master/texmf-dist/source/latex/morefloats/morefloats.drv
@@ -8,8 +8,14 @@
 %% 
 %% This is a generated file.
 %% 
-%% IMPORTANT NOTICE:
-%% The usual disclaimers apply:
+%% Project: morefloats
+%% Version: 2011/07/10 v1.0e
+%% 
+%% Copyright (C) 2010, 2011 by
+%%     H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+%% Portions of code copyrighted by other people as marked.
+%% 
+%% The usual disclaimer applys:
 %% If it doesn't work right that's your problem.
 %% (Nevertheless, send an e-mail to the maintainer
 %%  when you find an error in this package.)
@@ -26,41 +32,30 @@
 %% 
 %% This work has the LPPL maintenance status "maintained".
 %% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
+%% The Current Maintainer of this work is H.-Martin Muench.
 %% The main code of this package was invented by
 %% Don Hosek, Quixote 1990/07/27 (Thanks!).
 %% Maintenance has been taken over in September 2010 by H.-Martin M{\accent "7F u}nch.
 %% 
 %% This work consists of the main source file morefloats.dtx
 %% and the derived files
-%%    morefloats.sty, morefloats.ins, morefloats.drv,
-%%    morefloats-example.tex, morefloats.pdf.
+%%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+%%    morefloats-example.tex.
 %% 
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesFile{morefloats.drv}[2011/02/01 v1.0d
-             Increase limit of unprocessed floats (HMM; DH)]%
+\NeedsTeXFormat{LaTeX2e}[2009/09/24]
+\ProvidesFile{morefloats.drv}%
+  [2011/07/10 v1.0e Increase limit of unprocessed floats (HMM; DH)]
 \documentclass{ltxdoc}[2007/11/11]% v2.0u
-\usepackage[hiresbb]{lscape}[2000/10/22]% v3.01, from the graphics bundle
-\usepackage{holtxdoc}[2010/04/24]% v0.19
+\usepackage{pdflscape}[2008/08/11]% v0.10
+\usepackage{holtxdoc}[2011/02/04]%  v0.21
 %% morefloats may work with earlier versions of LaTeX2e and those
-%% class and package, but this was not tested.
-%% Please consider updating your LaTeX, class, and package
+%% class and packages, but this was not tested.
+%% Please consider updating your LaTeX, class, and packages
 %% to the most recent version (if they are not already the most
 %% recent version).
-%% Warning: holtxdoc, 2010/04/24 v0.19, requires the packages
-%% hypdoc, 2010/03/26, v1.9
-%% hyperref, 2010/03/30, v6.80u (latest: 2010/12/16, v6.81z)
-%% pdftexcmds, 2010/04/01, v0.9
-%% ltxcmds, 2010/03/09, v1.4 (latest: 2010/04/26, v1.7)
-%% hologo, 2010/04/24, v1.2
-%% array                     (latest: 2008/09/09, v2.4c)
-%% (or more recent versions) and does neither work with
-%% nor check for earlier versions!
 \hypersetup{%
  pdfsubject={LaTeX2e package for increasing the limit of unprocessed floats (HMM; DH)},%
- pdfkeywords={LaTeX, morefloats, floats, Don Hosek, Hans-Martin Muench},%
+ pdfkeywords={LaTeX, morefloats, floats, Hans-Martin Muench, Don Hosek},%
  pdfencoding=auto,%
  pdflang={en},%
  breaklinks=true,%
@@ -75,9 +70,7 @@
  pdfwindowui=true,%
  pdfnewwindow=true%
 }
-\setlength\hfuzz{1pt} % Ignore slight overfulls.
 \CodelineIndex
-\EnableCrossrefs
 \hyphenation{docu-ment}
 \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}%
 \begin{document}
diff --git a/Master/texmf-dist/source/latex/morefloats/morefloats.dtx b/Master/texmf-dist/source/latex/morefloats/morefloats.dtx
index b107339053a..c531accd6c2 100644
--- a/Master/texmf-dist/source/latex/morefloats/morefloats.dtx
+++ b/Master/texmf-dist/source/latex/morefloats/morefloats.dtx
@@ -1,11 +1,10 @@
 % \iffalse meta-comment
 %
-% morefloats package
-% file version: v1.0d
-% file date:          2011/02/01
-% documentation date: 2011/02/01
+% File: morefloats.dtx
+% Version: 2011/07/10 v1.0e
 %
-% Copyright (C) 2010, 2011 H.-Martin M\"{u}nch (Martin dot Muench at Uni-Bonn dot de)
+% Copyright (C) 2010, 2011 by
+%    H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
 % Portions of code copyrighted by other people as marked.
 %
 % The main code of this package was invented by
@@ -28,7 +27,13 @@
 %
 % This work consists of the main source file morefloats.dtx
 % and the derived files
-%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv.
+%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+%    morefloats-example.tex.
+%
+% Distribution:
+%    CTAN:macros/latex/contrib/morefloats/morefloats.dtx
+%    CTAN:macros/latex/contrib/morefloats/morefloats.pdf
+%    CTAN:install/macros/latex/contrib/morefloats.tds.zip
 %
 % Unpacking:
 %    (a) If morefloats.ins is present:
@@ -66,6 +71,8 @@
 %
 %<*ignore>
 \begingroup
+  \catcode123=1 %
+  \catcode125=2 %
   \def\x{LaTeX2e}%
 \expandafter\endgroup
 \ifcase 0\ifx\install y1\fi\expandafter
@@ -75,13 +82,10 @@
 %</ignore>
 %<*install>
 \input docstrip.tex
-
-\obeyspaces
-\Msg{********************************************************}
-\Msg{* Installation                                         *}
-\Msg{* Package: morefloats v1.0d 2011/02/01 LaTeX2e package *}
-\Msg{* Increase limit of unprocessed floats (HMM; DH)       *}
-\Msg{********************************************************}
+\Msg{*************************************************************************************}
+\Msg{* Installation}
+\Msg{* Package: morefloats 2011/07/10 v1.0e Increase limit of unprocessed floats (HMM; DH)}
+\Msg{*************************************************************************************}
 
 \keepsilent
 \askforoverwritefalse
@@ -91,8 +95,14 @@
 
 This is a generated file.
 
-IMPORTANT NOTICE:
-The usual disclaimers apply:
+Project: morefloats
+Version: 2011/07/10 v1.0e
+
+Copyright (C) 2010, 2011 by
+    H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+Portions of code copyrighted by other people as marked.
+
+The usual disclaimer applys:
 If it doesn't work right that's your problem.
 (Nevertheless, send an e-mail to the maintainer
  when you find an error in this package.)
@@ -109,17 +119,15 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-The Current Maintainer of this work is H.-Martin Muench
-(Martin dot Muench at Uni-Bonn dot de).
-
+The Current Maintainer of this work is H.-Martin Muench.
 The main code of this package was invented by
 Don Hosek, Quixote 1990/07/27 (Thanks!).
 Maintenance has been taken over in September 2010 by H.-Martin M\"{u}nch.
 
 This work consists of the main source file morefloats.dtx
 and the derived files
-   morefloats.sty, morefloats.ins, morefloats.drv,
-   morefloats-example.tex, morefloats.pdf.
+   morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+   morefloats-example.tex.
 
 \endpreamble
 \let\MetaPrefix\DoubleperCent
@@ -127,38 +135,37 @@ and the derived files
 \generate{%
   \file{morefloats.ins}{\from{morefloats.dtx}{install}}%
   \file{morefloats.drv}{\from{morefloats.dtx}{driver}}%
-  \file{ltxdoc.cfg}{\from{morefloats.dtx}{ltxdoc}}%
   \usedir{tex/latex/morefloats}%
   \file{morefloats.sty}{\from{morefloats.dtx}{package}}%
   \usedir{doc/latex/morefloats}%
   \file{morefloats-example.tex}{\from{morefloats.dtx}{example}}%
 }
 
-\obeyspaces
-\Msg{**************************************************************}
-\Msg{*                                                            *}
-\Msg{* To finish the installation you have to move the following  *}
-\Msg{* file into a directory searched by TeX:                     *}
-\Msg{*                                                            *}
-\Msg{* morefloats.sty                                             *}
-\Msg{*                                                            *}
-\Msg{* To produce the documentation run the file `morefloats.drv' *}
-\Msg{* through (pdf)LaTeX, e.g.                                   *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*  makeindex -s gind.ist morefloats.idx                      *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*  makeindex -s gind.ist morefloats.idx                      *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*                                                            *}
-\Msg{* At least two runs are necessary e.g. to get the            *}
-\Msg{*  references right!                                         *}
-\Msg{*                                                            *}
-\Msg{* Happy TeXing!                                              *}
-\Msg{*                                                            *}
-\Msg{**************************************************************}
+\catcode32=13\relax% active space
+\let =\space%
+\Msg{************************************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* file into a directory searched by TeX:}
+\Msg{*}
+\Msg{*     morefloats.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file `morefloats.drv'}
+\Msg{* through (pdf)LaTeX, e.g.}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*  makeindex -s gind.ist morefloats.idx}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*  makeindex -s gind.ist morefloats.idx}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*}
+\Msg{* At least three runs are necessary e.g. to get the}
+\Msg{*  references right!}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*}
+\Msg{************************************************************************}
 
 \endbatchfile
-
 %</install>
 %<*ignore>
 \fi
@@ -175,29 +182,20 @@ and the derived files
 %
 %    \begin{macrocode}
 %<*driver>
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesFile{morefloats.drv}[2011/02/01 v1.0d
-             Increase limit of unprocessed floats (HMM; DH)]%
+\NeedsTeXFormat{LaTeX2e}[2009/09/24]
+\ProvidesFile{morefloats.drv}%
+  [2011/07/10 v1.0e Increase limit of unprocessed floats (HMM; DH)]
 \documentclass{ltxdoc}[2007/11/11]% v2.0u
-\usepackage[hiresbb]{lscape}[2000/10/22]% v3.01, from the graphics bundle
-\usepackage{holtxdoc}[2010/04/24]% v0.19
+\usepackage{pdflscape}[2008/08/11]% v0.10
+\usepackage{holtxdoc}[2011/02/04]%  v0.21
 %% morefloats may work with earlier versions of LaTeX2e and those
-%% class and package, but this was not tested.
-%% Please consider updating your LaTeX, class, and package
+%% class and packages, but this was not tested.
+%% Please consider updating your LaTeX, class, and packages
 %% to the most recent version (if they are not already the most
 %% recent version).
-%% Warning: holtxdoc, 2010/04/24 v0.19, requires the packages
-%% hypdoc, 2010/03/26, v1.9
-%% hyperref, 2010/03/30, v6.80u (latest: 2010/12/16, v6.81z)
-%% pdftexcmds, 2010/04/01, v0.9
-%% ltxcmds, 2010/03/09, v1.4 (latest: 2010/04/26, v1.7)
-%% hologo, 2010/04/24, v1.2
-%% array                     (latest: 2008/09/09, v2.4c)
-%% (or more recent versions) and does neither work with
-%% nor check for earlier versions!
 \hypersetup{%
  pdfsubject={LaTeX2e package for increasing the limit of unprocessed floats (HMM; DH)},%
- pdfkeywords={LaTeX, morefloats, floats, Don Hosek, Hans-Martin Muench},%
+ pdfkeywords={LaTeX, morefloats, floats, Hans-Martin Muench, Don Hosek},%
  pdfencoding=auto,%
  pdflang={en},%
  breaklinks=true,%
@@ -212,13 +210,7 @@ and the derived files
  pdfwindowui=true,%
  pdfnewwindow=true%
 }
-\setlength\hfuzz{1pt} % Ignore slight overfulls.
 \CodelineIndex
-%\PageIndex           % instead of \CodelineIndex to get the page numbers
-\EnableCrossrefs
-%\DisableCrossrefs    % Say \DisableCrossrefs if index is ready.
-%\RecordChanges       % Gather update information.
-%\OnlyDescription     % Comment out for implementation details.
 \hyphenation{docu-ment}
 \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}%
 \begin{document}
@@ -227,76 +219,9 @@ and the derived files
 %</driver>
 %    \end{macrocode}
 %
-%    \begin{macrocode}
-%<*ltxdoc>
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesFile{ltxdoc.cfg}[2010/06/01 v1.0 configuration file for morefloats (HMM)]
-  %% Code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)],  %%
-  % copyrighted 2006, 2007 Heiko Oberdiek, part of project `latex-tds'.
-  % That file may be distributed and/or modified under the
-  % conditions of the LaTeX Project Public License, either version 1.3
-  % of this license or (at your option) any later version.
-  % The latest version of this license is in
-  %   http://www.latex-project.org/lppl.txt
-  % and version 1.3c or later is part of all distributions of LaTeX
-  % version 2005/12/01 or later.
-  % That work has the LPPL maintenance status `maintained'.
-  % The Current Maintainer of that work is Heiko Oberdiek.
-  %
-  \PassOptionsToClass{a4paper}{article}
-  \AtEndOfClass{%
-    \RequirePackage[numbered]{hypdoc}[2010/03/26]% v1.9
-    \pdfstringdefDisableCommands{%
-      \let\env\relax % longtable.dtx
-      \let\mytt\relax % tabularx.dtx
-    }%
-    \addtolength{\topmargin}{-10mm}%
-    \addtolength{\textheight}{20mm}%
-    % Depending on the page style, the head or foot area
-    % are put into the text area.
-    % Usually the page style is the default "plain".
-    % tools/verbatim.dtx uses "myheadings".
-    \def\string@plain{plain}%
-    \def\string@myheadings{myheadings}%
-    \def\current@pagestyle{plain}%
-    \let\ltxdoc@cfg@pagestyle\pagestyle
-    \def\pagestyle#1{%
-      \def\current@pagestyle{#1}%
-      \ltxdoc@cfg@pagestyle{#1}%
-    }%
-    \edef\ltxdoc@cfg@jobname{\jobname}%
-    \def\ltxdoc@cfg@longtable{longtable}%
-    \@onelevel@sanitize\ltxdoc@cfg@longtable
-    \ifx\ltxdoc@cfg@jobname\ltxdoc@cfg@longtable
-      \def\current@pagestyle{both}%
-    \fi
-    \let\ltxdoc@cfg@document\document
-    \def\document{%
-      \ifx\current@pagestyle\string@plain
-        \addtolength{\textheight}{\headheight}%
-        \addtolength{\textheight}{\headsep}%
-        \setlength{\headheight}{0pt}%
-        \setlength{\headsep}{0pt}%
-        \global\textheight\textheight
-        \global\headheight\headheight
-        \global\headsep\headsep
-      \fi
-      \ifx\current@pagestyle\string@myheadings
-        \addtolength{\textheight}{\footskip}%
-        \global\textheight\textheight
-      \fi
-      \ltxdoc@cfg@document
-    }%
-  %% End of code from original ltxdoc.cfg [2007/01/08 latex-tds: ltxdoc.cls configuration (HO)]  %%
-  %% Place additional code here.  %%
-  }
-
-%</ltxdoc>
-%    \end{macrocode}
-%
 % \fi
 %
-% \CheckSum{3387}
+% \CheckSum{3389}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -309,7 +234,7 @@ and the derived files
 %   Minus         \-     Point         \.     Solidus       \/
 %   Colon         \:     Semicolon     \;     Less than     \<
 %   Equals        \=     Greater than  \>     Question mark \?
-%   Commercial at \@     Left bracket  \[     Backslash    \\
+%   Commercial at \@     Left bracket  \[     Backslash     \\
 %   Right bracket \]     Circumflex    \^     Underscore    \_
 %   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %   Right brace   \}     Tilde         \~}
@@ -330,23 +255,17 @@ and the derived files
 %       \edef\x{\noexpand\DoNotIndex{\@backslashchar9}}%^^A
 %     }%^^A
 %   \expandafter\endgroup\x
-% \DoNotIndex{\documentclass,\usepackage,\hfuzz,\small,\tt,\begin,\end}
-% \DoNotIndex{\NeedsTeXFormat,\filedate,\fileversion,\DoNotIndex}
-% \DoNotIndex{\def,\edef,\gdef,\divide,\advance,\multiply}
-% \DoNotIndex{\",\-,\,,\\,\hskip,\H,\ldots,\indent,\noindent,\textbackslash}
-% \DoNotIndex{\textbf,\textit,\textquotedblleft,\textquotedblright,\textsf,\texttt}
-% \DoNotIndex{\ifthenelse,\and,\equal,\whiledo,\if,\ifx,\ifnum,\else,\fi}
-% \DoNotIndex{\CodelineIndex,\EnableCrossrefs,\DisableCrossrefs}
-% \DoNotIndex{\DocInput,\AltMacroFont}
-% \DoNotIndex{\@ne,\tw@,\thr@@}
-% \DoNotIndex{\newpage,\pagebreak,\newline,\linebreak,\nolinebreak}
-% \DoNotIndex{\MessageBreak,\protect}
-% \DoNotIndex{\RecordChanges,\OnlyDescription,\ProvidesPackage}
-% \DoNotIndex{\smallskip,\medskip,\bigskip,\space,\thinspace}
-% \DoNotIndex{\item}
-% \DoNotIndex{\plainTeX,\TeX,\LaTeX,\pdfLaTeX}
-% \DoNotIndex{\holtxdoc,\hypdoc,\Oberdiek}
-% \DoNotIndex{\makeatletter,\makeatother,\footnote,\section}
+% \DoNotIndex{\\,\,}
+% \DoNotIndex{\def,\edef,\gdef}
+% \DoNotIndex{\setcounter, \addtocounter, \arabic, \ifnum}
+% \DoNotIndex{\begin, \end, \LaTeX, \LateXe}
+% \DoNotIndex{\bigskip, \caption, \centering, \hline, \MessageBreak}
+% \DoNotIndex{\documentclass, \markboth, \mathrm, \mathord}
+% \DoNotIndex{\ifx}
+% \DoNotIndex{\NeedsTeXFormat, \usepackage}
+% \DoNotIndex{\newline, \linebreak, \newpage, \pagebreak}
+% \DoNotIndex{\section, \space, \thinspace}
+% \DoNotIndex{\textbackslash, \textsf, \texttt}
 % \DoNotIndex{\@elt,\@freelist, \newinsert, \value}
 % \DoNotIndex{\bx@A,  \bx@B,  \bx@C,  \bx@D,  \bx@E,  \bx@F,  \bx@G,  \bx@H,  \bx@I,  \bx@J,  \bx@K,  \bx@L,  \bx@M,  \bx@N,  \bx@O,  \bx@P,  \bx@Q,  \bx@R,  \bx@S,  \bx@T,  \bx@U,  \bx@V,  \bx@W,  \bx@X,  \bx@Y,  \bx@Z}
 % \DoNotIndex{\bx@AA, \bx@AB, \bx@AC, \bx@AD, \bx@AE, \bx@AF, \bx@AG, \bx@AH, \bx@AI, \bx@AJ, \bx@AK, \bx@AL, \bx@AM, \bx@AN, \bx@AO, \bx@AP, \bx@AQ, \bx@AR, \bx@AS, \bx@AT, \bx@AU, \bx@AV, \bx@AW, \bx@AX, \bx@AY, \bx@AZ}
@@ -360,27 +279,26 @@ and the derived files
 % \DoNotIndex{\bx@IA, \bx@IB, \bx@IC, \bx@ID, \bx@IE, \bx@IF, \bx@IG, \bx@IH, \bx@II, \bx@IJ, \bx@IK, \bx@IL, \bx@IM, \bx@IN, \bx@IO, \bx@IP, \bx@IQ, \bx@IR, \bx@IS, \bx@IT, \bx@IU, \bx@IV, \bx@IW, \bx@IX, \bx@IY, \bx@IZ}
 % \DoNotIndex{\bx@JA, \bx@JB, \bx@JC, \bx@JD, \bx@JE, \bx@JF, \bx@JG, \bx@JH, \bx@JI, \bx@JJ, \bx@JK, \bx@JL, \bx@JM, \bx@JN, \bx@JO, \bx@JP, \bx@JQ, \bx@JR, \bx@JS, \bx@JT, \bx@JU, \bx@JV, \bx@JW, \bx@JX, \bx@JY, \bx@JZ}
 %
-% \title{The \textsf{morefloats} package\footnote{This file%
-%        has version number v1.0d, last%
-%        revised 2011/02/01, documentation dated 2011/02/01.}}
-% \author{invented by\\
-% Don Hosek, Quixote,\\
-% now maintained by H.-Martin M\"{u}nch\\
-% (\texttt{Martin dot Muench at Uni-Bonn dot de})}
-% \date{2011/02/01}
+% \title{The \xpackage{morefloats} package}
+% \date{2011/07/10 v1.0e}
+% \author{H.-Martin M\"{u}nch (current maintainer;\\
+%  invented by Don Hosek, Quixote)\\
+%  \xemail{Martin.Muench at Uni-Bonn.de}}
 %
 % \maketitle
 %
 % \begin{abstract}
-% The current limit of unprocessed floats, 18,
-% can be increased with this \textsf{morefloats} package.
-% Otherwise, |\clear(double)page|, |h(!)|, |H|~from the \textsf{float} package,
-% or |\FloatBarrier| from the \textsf{picins} package might help.
+% The current limit of unprocessed floats, $18$,
+% can be increased with this \xpackage{morefloats} package.
+% Otherwise, |\clear(double)page|, |h(!)|, |H|~from the \xpackage{float} package,
+% or |\FloatBarrier| from the \xpackage{picins} package might help.
 % \end{abstract}
 %
+% \bigskip
+%
 % \noindent Note: The main code of this package was invented by\\
-% Don Hosek, Quixote, 1990/07/27 (Thanks!).\\
-% The current maintainer is H.-Martin M\"{u}nch.\\
+% \textsc{Don Hosek}, Quixote, 1990/07/27 (Thanks!).\\
+% The current maintainer is \textsc{H.-Martin M\"{u}nch}.\\
 %
 % \bigskip
 %
@@ -392,24 +310,22 @@ and the derived files
 %
 % \bigskip
 %
-% \noindent Save per page about $200\unit{ml}$ water,
-% $2\unit{g}$ CO$_{2}$ and $2\unit{g}$ wood:
-% Therefore please print only if this is really necessary.
-%
-% \bigskip
+% \noindent {\color{green} Save per page about $200\unit{ml}$ water,
+% $2\unit{g}$ CO$_{2}$ and $2\unit{g}$ wood:\\
+% Therefore please print only if this is really necessary.}
 %
 % \pagebreak
 %
 % \tableofcontents
 %
-% \bigskip
+% \pagebreak
 %
 % \section{Introduction\label{sec:Introduction}}
 %
-% The current limit of unprocessed floats, 18,
-% can be increased with this \textsf{morefloats} package.
-% Otherwise, |\clear(double)page|, |h(!)|, |H|~from the \textsf{float} package,
-% or |\FloatBarrier| from the \textsf{picins} package might help.
+% The current limit of unprocessed floats, $18$,
+% can be increased with this \xpackage{morefloats} package.
+% Otherwise, |\clear(double)page|, |h(!)|, |H|~from the \xpackage{float} package,
+% or |\FloatBarrier| from the \xpackage{picins} package might help.
 %
 % \section{Usage}
 %
@@ -418,14 +334,14 @@ and the derived files
 %   |\usepackage[<|\textit{options}|>]{morefloats}|
 % \end{quote}
 % \noindent in the preamble of your \LaTeXe\ source file.\\
-% \noindent The \textsf{morefloats} package takes two options: |maxfloats| and |morefloats|,
-% where |morefloats| gives the number of additional floats and |maxfloats| gives
-% the maximum number of floats. |maxfloats=25| therefore means, that there are
-% 18 (default) floats and 7 additional floats. |morefloats=7| therefore has the
-% same meaning. It is only necessary to give one of these two options.
-% At the time beeing, it is not possible to reduce the number of floats
-% (for example to save boxes). If you have code accomplishing that, please
-% send it to the package maintainer, thanks.\\
+% \noindent The \xpackage{morefloats} package takes two options: |maxfloats| and
+% |morefloats|, where |morefloats| gives the number of additional floats and
+% |maxfloats| gives the maximum number of floats. |maxfloats=25| therefore means,
+% that there are $18$ (default) floats and $7$ additional floats.
+% |morefloats=7| therefore has the same meaning. It is only necessary to give
+% one of these two options. At the time beeing, it is not possible to reduce
+% the number of floats (for example to save boxes). If you have code
+% accomplishing that, please send it to the package maintainer, thanks.\\
 % Version 1.0b used a fixed value of |maxfloats=36|. Therefore for backward
 % compatibility this value is taken as the default one.\\
 % Example:
@@ -442,16 +358,18 @@ and the derived files
 % \end{quote}
 % .\\
 %
-% \bigskip
+% \pagebreak
 %
 % \section{Alternatives (kind of)}
 %
-% If the additional counter needed by \textsf{morefloats} since v1.0c
-% (or something else) is an issue, the old \textsf{morefloats} without
+% If the one additional counter needed by \xpackage{morefloats} since v1.0c
+% (or something else) is an issue, the old \xpackage{morefloats} without
 % the need for a counter but with a fixed number of |maxfloats=36|
 % \ (i.\,e.~$18$~|morefloats|) can be used:\\
 % \href{http://ctan.org/tex-archive/obsolete/macros/latex/contrib/misc#jh896351434ce80d6a7be8e0287b9c221a}{CTAN:obsolete/macros/latex/contrib/misc/morefloats.sty}.\\
+%
 % \bigskip
+%
 % If you really want to increase the number of (possible) floats,
 % this is the right package. On the other hand, if you ran into trouble of
 % \texttt{Too many unprocessed floats}, but would also accept less floats,
@@ -468,16 +386,16 @@ and the derived files
 %   \item[-] Telling \LaTeX\ to please put the object where it was placed:
 %     |h!| (= here!) float specifier.
 %   \item[-] Forcing \LaTeX\ to put the object where it was placed and shut up:
-%     The \textsf{float} package provides the \textquotedblleft style
+%     The \xpackage{float} package provides the \textquotedblleft style
 %     option here, giving floating environments a [H] option which means
 %     `PUT IT HERE' (as opposed to the standard [h] option which means
-%     `You may put it here if you like')\textquotedblright\ (\textsf{float}
+%     `You may put it here if you like')\textquotedblright\ (\xpackage{float}
 %     package documentation v1.3d as of 2001/11/08).
 %     Changing e.\,g. |\begin{figure}[tbp]...| to |\begin{figure}[H]...|
 %     forces the figure to be placed HERE instead of floating away.\\
-%     The \textsf{float} package, 2001/11/08 v1.3d, is available at \CTAN{}:\\
+%     The \xpackage{float} package, 2001/11/08 v1.3d, is available at \CTAN{}:\\
 %     \CTAN{macros/latex/contrib/float/}
-%   \item[-] The \textsf{placeins} package provides the command |\FloatBarrier|.
+%   \item[-] The \xpackage{placeins} package provides the command |\FloatBarrier|.
 %     Floats occuring before the |\FloatBarrier| are not allowed to float
 %     to a later place, and floats occuring after the |\FloatBarrier| are not
 %     allowed to float to a earlier place than the |\FloatBarrier|. (There
@@ -485,7 +403,7 @@ and the derived files
 %     The same package also provides an option to add to section headings
 %     automatically |\FloatBarrier|s. It is further possible to make
 %     |\FloatBarrier|s less strict (see that package's documentation).\\
-%     The \textsf{placeins} package, 2005/04/18 v2.2, is available at \CTAN{}:\\
+%     The \xpackage{placeins} package, 2005/04/18 v2.2, is available at \CTAN{}:\\
 %     \CTAN{macros/latex/contrib/placeins/}
 % \end{description}
 %
@@ -499,15 +417,15 @@ and the derived files
 %  and a short notice, and I will probably include it in
 %  the list above.)\\
 %
-% \newpage
+% \bigskip
 %
 % \section{Example}
 %
 %    \begin{macrocode}
-%<*example>%
-\documentclass[british]{article}
+%<*example>
+\documentclass[british]{article}[2007/10/19]% v1.4h
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\usepackage[maxfloats=19]{morefloats}[2011/02/01]% v1.0d
+\usepackage[maxfloats=19]{morefloats}[2011/07/10]% v1.0e
 \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}%
 \listfiles
 \begin{document}
@@ -516,14 +434,15 @@ and the derived files
 \markboth{Example for morefloats}{Example for morefloats}
 
 This example demonstrates the use of package\newline
-\textsf{morefloats}, v1.0d as of 2011/02/01 (HMM; DH).\newline
-The package takes options (here: maxfloats=19 is used).\newline
+\textsf{morefloats}, v1.0e as of 2011/07/10 (HMM; DH).\newline
+The package takes options (here: \verb|maxfloats=19| is used).\newline
 For more details please see the documentation!\newline
 
 To reproduce the\newline
 \texttt{\LaTeX\ Error: Too many unprocessed floats},\newline
-comment out the \texttt{\textbackslash usepackage...} in the preamble
-(line~3) (by placing a \%\ before it).\newline
+comment out the \verb|\usepackage...| in the preamble
+(line~3)\newline
+(by placing a \%\ before it).\newline
 
 \bigskip
 
@@ -532,9 +451,13 @@ and $2\unit{g}$~wood:\newline
 Therefore please print only if this is really necessary.\newline
 I do NOT think, that it is necessary to print THIS file, really!
 
+\bigskip
+
+There follow a lot of floating tables.
+
 \pagebreak
 
-Here are a lot of floating tables:\newline
+Here are a lot of floating tables.\newline
 
 \begin{table}[t] \centering%
 \begin{tabular}{|l|}
@@ -683,7 +606,7 @@ A table, which will keep floating.\\ \hline
 \begin{table}[t] \centering%
 \begin{tabular}{|l|}
 \hline
-One floating table too much
+One floating table too many
 (without \textsf{morefloats} and appropriate option(s)).\\ \hline
 \end{tabular}%
 \caption{The nineteenth Table}%
@@ -695,48 +618,46 @@ One floating table too much
 %
 % \newpage
 %
-% \StopEventually{
-% }
+% \StopEventually{}
 %
 % \section{The implementation}
 %
-%
 % We start off by checking that we are loading into \LaTeXe\ and
-% announcing the name and version of this package.\\
+% announcing the name and version of this package.
 %
 %    \begin{macrocode}
 %<*package>
 %    \end{macrocode}
 %
 %    \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesPackage{morefloats}[2011/02/01 v1.0d
+\NeedsTeXFormat{LaTeX2e}[2009/09/24]
+\ProvidesPackage{morefloats}[2011/07/10 v1.0e
             Increase limit of unprocessed floats (HMM; DH)]
 
 %    \end{macrocode}
 %
 % \DescribeMacro{Options}
 %    \begin{macrocode}
-\RequirePackage{kvoptions}[2010/02/22]% v3.7
-
-%% morefloats may work with an earlier version of that package,
-%% but this was not tested. Please consider updating your package
-%% to the most recent version (if it is not already the most
+\RequirePackage{kvoptions}[2010/12/23]% v3.10
+%% morefloats may work with earlier versions of LaTeX2e and that
+%% package, but this was not tested.
+%% Please consider updating your LaTeX and package
+%% to the most recent version (if they are not already the most
 %% recent version).
 
 \SetupKeyvalOptions{family = morefloats,prefix = morefloats@}
-\DeclareStringOption{maxfloats}% \morefloats@maxfloats
+\DeclareStringOption{maxfloats}%  \morefloats@maxfloats
 \DeclareStringOption{morefloats}% \morefloats@morefloats
 
 \ProcessKeyvalOptions*
 
 %    \end{macrocode}
 %
-% The \textsf{morefloats} package takes two options: |maxfloats| and |morefloats|,
+% The \xpackage{morefloats} package takes two options: |maxfloats| and |morefloats|,
 % where |morefloats| gives the number of additional floats and |maxfloats| gives
 % the maximum number of floats. |maxfloats=37| therefore means, that there are
-% 18 (default) floats and another 19 additional floats. |morefloats=19| therefore
-% has the same meaning. Version 1.0b used a fixed value of |maxfloats=36|.
+% $18$ (default) floats and another $19$ additional floats. |morefloats=19| therefore
+% has the same meaning. Version~1.0b used a fixed value of |maxfloats=36|.
 % Therefore for backward compatibility this value will be taken as the default one.\\
 % Now we check whether |maxfloats=...| or |morefloats=...| or both were used,
 % and if one option was not used, we supply the value. If no option was used at all,
@@ -744,10 +665,10 @@ One floating table too much
 %
 %    \begin{macrocode}
 \newcounter{maxfloats}
+\setcounter{maxfloats}{0}
 
 \ifx\morefloats@maxfloats\@empty
-  \ifx\morefloats@morefloats\@empty
-    % apply defaults:
+  \ifx\morefloats@morefloats\@empty% apply defaults:
     \gdef\morefloats@maxfloats{36}
     \gdef\morefloats@morefloats{18}
   \else
@@ -763,6 +684,11 @@ One floating table too much
   \fi
 \fi
 
+%    \end{macrocode}
+%
+% \pagebreak
+%
+%    \begin{macrocode}
 \setcounter{maxfloats}{\morefloats@maxfloats}
 %    \end{macrocode}
 %
@@ -835,7 +761,12 @@ One floating table too much
   \fi
 \fi
 
-\PackageWarning{maxfloats}{\MessageBreak%
+%    \end{macrocode}
+%
+% \pagebreak
+%
+%    \begin{macrocode}
+\PackageWarning{maxfloats}{%
   Maximum number of possible floats asked for: \arabic{maxfloats}.\MessageBreak%
   LaTeX might run out of dimensions or memory\MessageBreak%
   before this (in which case it will notify you).\MessageBreak%
@@ -853,9 +784,11 @@ One floating table too much
 % well before that happened.\\
 %
 % \LaTeX2e\ uses a |\dimen| for each |\newinsert|, and the number of |\dimen|s
-% is also restricted. Therefore only use the number of floats you need!\\
+% is also restricted. Therefore only use the number of floats you need!
+% To check the number of used registers, you could use the \xpackage{regstats}
+% and/or \xpackage{regcount} packages (see subsection~\ref{ss:Downloads}).
 %
-% \newpage
+% \bigskip
 %
 % \DescribeMacro{Allocating insert registers}
 % \DescribeMacro{@freelist}
@@ -866,7 +799,7 @@ One floating table too much
 % That accomplished, the next step is to define the macro |\@freelist|,
 % which is merely a~list of the box registers each preceded by |\@elt|.
 % This approach allows processing of the list to be done far more efficiently.
-% A similar approach is used by Mittelbach \& Sch\"{o}pf's \texttt{doc.sty} to
+% A similar approach is used by \textsc{Mittelbach \& Sch\"{o}pf}'s \texttt{doc.sty} to
 % keep track of control sequences, which should not be indexed.\\
 % First for the 18 default \LaTeX\ boxes.\\
 % \noindent |\ifnum \value{maxfloats} <= 18|, \LaTeX\ already allocated the insert registers. |\fi|\\
@@ -875,13 +808,13 @@ One floating table too much
 % \begin{landscape}
 %
 %    \begin{macrocode}
-\gdef\@freelist{\@elt\bx@A\@elt\bx@B\@elt\bx@C\@elt\bx@D\@elt\bx@E\@elt\bx@F\@elt\bx@G\@elt\bx@H\@elt%
+\global\long\def\@freelist{\@elt\bx@A\@elt\bx@B\@elt\bx@C\@elt\bx@D\@elt\bx@E\@elt\bx@F\@elt\bx@G\@elt\bx@H\@elt%
 \bx@I\@elt\bx@J\@elt\bx@K\@elt\bx@L\@elt\bx@M\@elt\bx@N\@elt\bx@O\@elt\bx@P\@elt\bx@Q\@elt\bx@R}
 
 %    \end{macrocode}
 %
 % Now we need to add |\@elt\bx@...| depending on the number of |morefloats| wanted:\\
-% (Karl Berry helped with two out of three |\expandafter|s, thanks!)
+% (\textsc{Karl Berry} helped with two out of three |\expandafter|s, thanks!)
 %
 % \medskip
 %
@@ -1141,7 +1074,7 @@ One floating table too much
 %
 %    \begin{macrocode}
 \ifnum \value{maxfloats}>266
-  \PackageError{morefloats}{Too much floats called for}{%
+  \PackageError{morefloats}{Too many floats called for}{%
     You requested more than 266 floats.\MessageBreak%
     (\arabic{maxfloats} to be precise.)\MessageBreak%
     According to my knowledge, LaTeX cannot process\MessageBreak%
@@ -1179,67 +1112,71 @@ One floating table too much
 %
 % \section{Installation}
 %
-% \subsection{Downloads}
+% \subsection{Downloads\label{ss:Downloads}}
 %
-% Everything should be available on \CTAN{}, \url{ftp://ftp.ctan.org/tex-archive/},
+% Everything is available on \CTAN{}, \url{ftp://ftp.ctan.org/tex-archive/},
 % but may need additional packages themselves.\\
 %
 % \DescribeMacro{morefloats.dtx}
 % For unpacking the |morefloats.dtx| file and constructing the documentation it is required:
 % \begin{description}
-% \item[-] \TeX Format \LaTeXe, 1994/06/01, v2$\varepsilon $: \CTAN{}
+% \item[-] \TeX Format \LaTeXe{}, 2009/09/24, v2$\varepsilon $: \CTAN{}
 %
-% \item[-] document class \textsf{ltxdoc}, 2007/11/11, v2.0u,\\
+% \item[-] document class \xpackage{ltxdoc}, 2007/11/11, v2.0u,\\
 %           \CTAN{macros/latex/base/ltxdoc.dtx}
 %
-% \item[-] package \textsf{lscape}, 2000/10/22, v3.01, from the graphics bundle:\\
-%           \CTAN{macros/latex/required/graphics/}
+% \item[-] package \xpackage{pdflscape}, 2008/08/11, v0.10,\\
+%           \CTAN{macros/latex/contrib/oberdiek/pdflscape.dtx}
 %
-% \item[-] package \textsf{holtxdoc}, 2010/04/18, v0.18,\\
+% \item[-] package \xpackage{holtxdoc}, 2011/02/04, v0.21,\\
 %           \CTAN{macros/latex/contrib/oberdiek/holtxdoc.dtx}
 %
-% \item[-] package \textsf{hypdoc}, 2010/03/26, v1.9,\\
+% \item[-] package \xpackage{hypdoc}, 2010/03/26, v1.9,\\
 %           \CTAN{macros/latex/contrib/oberdiek/hypdoc.dtx}
 % \end{description}
 %
 % \DescribeMacro{morefloats.sty}
-% The |morefloats.sty| for \LaTeXe\ (i.\,e. all documents using
-% the \textsf{morefloats} package) requires:
+% The |morefloats.sty| for \LaTeXe{} (i.\,e.~each document using
+% the \xpackage{morefloats} package) requires:
 % \begin{description}
-%   \item[-] \TeX Format \LaTeXe, 1994/06/01, v2$\varepsilon $, \CTAN{}
+%   \item[-] \TeX Format \LaTeXe{}, 2009/09/24, v2$\varepsilon $, \CTAN{}
 %
-%   \item[-] package \textsf{kvoptions}, 2010/02/22, v3.7,\\
+%   \item[-] package \xpackage{kvoptions}, 2010/12/23, v3.10,\\
 %             \CTAN{macros/latex/contrib/oberdiek/kvoptions.dtx}
 % \end{description}
 %
+% \DescribeMacro{regstats}
+% \DescribeMacro{regcount}
+% To check the number of used registers it was mentioned:
+% \begin{description}
+% \item[-] package \xpackage{regstats}, 2011/06/18, v1.0d,\\
+%           \CTAN{macros/latex/contrib/regstats/regstats.dtx}
+%
+% \item[-] package \xpackage{regcount}, 1999/08/03, v1.0,\\
+%           \CTAN{macros/latex/contrib/regcount/regcount.dtx}
+% \end{description}
 %
 % \DescribeMacro{Oberdiek}
 % \DescribeMacro{holtxdoc}
 % \DescribeMacro{hypdoc}
-% All packages of Heiko Oberdiek's bundle `oberdiek'
-% (especially \textsf{holtxdoc}, \textsf{hypdoc}, and \textsf{kvoptions})
+% All packages of \textsc{Heiko Oberdiek's} bundle `oberdiek'
+% (especially \xpackage{holtxdoc}, \xpackage{hypdoc}, and \xpackage{kvoptions})
 % are also available in a TDS compliant ZIP archive:\\
 % \CTAN{install/macros/latex/contrib/oberdiek.tds.zip}.\\
-% \textbf{Warning}: holtxdoc, 2010/04/24 v0.19, requires the packages
-% \begin{description}
-% \item[-] hypdoc, 2010/03/26, v1.9
-% \item[-] hyperref, 2010/03/30, v6.80u (latest: 2010/12/16, v6.81z)
-% \item[-] pdftexcmds, 2010/04/01, v0.9
-% \item[-] ltxcmds, 2010/03/09, v1.4 (latest: 2010/04/26, v1.7)
-% \item[-] hologo, 2010/04/24, v1.2
-% \item[-] array                     (latest: 2008/09/09, v2.4c)
-% \end{description}
-% (or more recent versions) and does neither work with
-% nor check for earlier versions!\\
-% (It is probably best to download\\
-% \CTAN{install/macros/latex/contrib/oberdiek.tds.zip}\\
-% and use this, because the packages in there should be both
-% recent and compatible.)\\
+% It is probably best to download and use this, because the packages in there
+% should be both recent and compatible.\\
+%
+% \DescribeMacro{hyperref}
+% \noindent \xpackage{hyperref} is not included in that bundle and needs to be downloaded
+% separately,\\
+% \url{http://mirror.ctan.org/install/macros/latex/contrib/hyperref.tds.zip}.\\
 %
 % \DescribeMacro{M\"{u}nch}
-% A list of my packages can be found at\\
+% A list of my packages can be found at
 % \url{http://www.Uni-Bonn.de/~uzs5pv/LaTeX.html}.\\
 %
+% \pagebreak
+%
 % \subsection{Package, unpacking TDS}
 %
 % \paragraph{Package.} This package is available on \CTAN{}:
@@ -1256,12 +1193,12 @@ One floating table too much
 %
 % \paragraph{Unpacking.} The \xext{dtx} file is a self-extracting
 % \docstrip\ archive. The files are extracted by running the
-% \xext{dtx} through \plainTeX:
+% \xext{dtx} through \plainTeX{}:
 % \begin{quote}
 %   \verb|tex morefloats.dtx|
 % \end{quote}
 %
-% About generating the documentation see paragraph~\ref{GenDoc} below.\\
+% About generating the documentation see paragraph~\ref{GenDoc} below.
 %
 % \paragraph{TDS.} Now the different files must be moved into
 % the different directories in your installation TDS tree
@@ -1335,24 +1272,24 @@ One floating table too much
 % \end{quote}
 % If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's
 % TDS installing feature, then some files can already be in the right
-% place, see the documentation of \docstrip.
+% place, see the documentation of \docstrip{}.
 %
 % \subsection{Refresh file name databases}
 %
-% If your \TeX~distribution (\teTeX, \mikTeX,\dots) relies on file name
-% databases, you must refresh these. For example, \teTeX\ users run
+% If your \TeX~distribution (\teTeX{}, \mikTeX{},\dots{}) relies on file name
+% databases, you must refresh these. For example, \teTeX{} users run
 % \verb|texhash| or \verb|mktexlsr|.
 %
 % \subsection{Some details for the interested}
 %
-% \paragraph{Unpacking with \LaTeX.}
+% \paragraph{Unpacking with \LaTeX{}.}
 % The \xext{dtx} chooses its action depending on the format:
 % \begin{description}
 % \item[\plainTeX:] Run \docstrip\ and extract the files.
 % \item[\LaTeX:] Generate the documentation.
 % \end{description}
 % If you insist on using \LaTeX\ for \docstrip\ (really,
-% \docstrip\ does not need \LaTeX), then inform the autodetect routine
+% \docstrip\ does not need \LaTeX{}), then inform the autodetect routine
 % about your intention:
 % \begin{quote}
 %   \verb|latex \let\install=y\input{morefloats.dtx}|
@@ -1362,15 +1299,15 @@ One floating table too much
 %
 % \paragraph{Generating the documentation.\label{GenDoc}}
 % You can use both the \xext{dtx} or the \xext{drv} to generate
-% the documentation. The process can be configured by the
+% the documentation. The process can be configured by a
 % configuration file \xfile{ltxdoc.cfg}. For instance, put the following
-% line into this file, if you want to have A4 as paper format:
+% line into that file, if you want to have A4 as paper format:
 % \begin{quote}
 %   \verb|\PassOptionsToClass{a4paper}{article}|
 % \end{quote}
 %
 % \noindent An example follows how to generate the
-% documentation with \pdfLaTeX :
+% documentation with \pdfLaTeX{}:
 %
 % \begin{quote}
 %\begin{verbatim}
@@ -1385,16 +1322,16 @@ One floating table too much
 % \section{Acknowledgements}
 %
 % The main code of this package was invented by\\
-% Don Hosek, Quixote, 1990/07/27.\\
-% I (H.-Martin M\"{u}nch) would like to thank Don Hosek for his work.
-% Further I would like to thank Karl Berry for helping with taking
+% \textsc{Don Hosek}, Quixote, 1990/07/27.\\
+% I (\textsc{H.-Martin M\"{u}nch}) would like to thank \textsc{Don Hosek}
+% for his work.
+% Further I would like to thank \textsc{Karl Berry} for helping with taking
 % over the maintainership of this package and two missing |\expandafter|s,
-% Heiko Oberdiek (\texttt{heiko dot oberdiek at googlemail dot com}) for
-% providing a~lot~(!) of useful packages (from which I also got everything
-% I know about creating a file in \xfile{dtx} format, ok, say it: copying),
-% everybody of the \CTAN{} team for managing \CTAN{},
-% and the \Newsgroup{comp.text.tex} and \Newsgroup{de.comp.text.tex}
-% newsgroups for their help in all things \TeX.
+% \textsc{Heiko Oberdiek} for providing a~lot~(!) of useful packages (from
+% which I also got everything I know about creating a file in \xfile{dtx}
+% format, ok, say it: copying), everybody of the \CTAN{} team for managing
+% \CTAN{}, and the \Newsgroup{comp.text.tex} and \Newsgroup{de.comp.text.tex}
+% newsgroups for their help in all things \TeX{}.
 %
 % \smallskip
 %
@@ -1414,23 +1351,40 @@ One floating table too much
 %     \item Included an example file.
 %     \item Created a \texttt{README} file.
 %   \end{Version}
+% \pagebreak
 %   \begin{Version}{2011/02/01 v1.0d}
 %     \item References to\\
 %             \url{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=figurehere} and\\
 %             \href{http://ctan.org/tex-archive/obsolete/macros/latex/contrib/misc#jh896351434ce80d6a7be8e0287b9c221a}{CTAN:obsolete/macros/latex/contrib/misc/morefloats.sty}
 %             added.
-%     \item Now using the \textsf{lscape} package from the \textsf{graphics} bundle
-%             to print some pages of the documentation in landscape instead of
-%             portrait mode, because they were way too wide.
+%     \item Now using the \xpackage{lscape} package from the \xpackage{graphics}
+%             bundle to print some pages of the documentation in landscape instead
+%             of portrait mode, because they were way too wide. (\textit{Since v1.0e
+%             replaced by \xpackage{pdflscape} package.})
 %     \item Replaced the list of my packages with a link to web page list of those,
-%             which has the advantage of showing the recent versions of all those packages.
-%     \item Updated to version 2010/12/16 v6.81z of the \textsf{hyperref} package.
+%             which has the advantage of showing the recent versions of all those
+%             packages.
+%     \item Updated the version of the \xpackage{hyperref} package.
+%             (\textit{Since version~1.0e the \xpackage{morefloats} package uses
+%              a fixed version of the \xpackage{holtxdoc} package, which calls for
+%              the right version of the \xpackage{hyperref} package, therefore
+%              it is no longer necessary to give the recent version of the
+%              \xpackage{hyperref} package here.})
 %     \item Minor details.
 %   \end{Version}
+%   \begin{Version}{2011/07/10 v1.0e}
+%     \item There is a new version of the used \xpackage{kvoptions} package,
+%             2010/12/23, v3.10.
+%     \item Now using the \xpackage{pdflscape} package instead of the
+%             \xpackage{lscape} package in the documentation.
+%     \item The \xpackage{holtxdoc} package was fixed (recent: 2011/02/04, v0.21),
+%             therefore the warning in \xfile{drv} could be removed.~-- Adapted
+%             the style of this documentation to new \textsc{Oberdiek} \xfile{dtx}
+%             style.
+%     \item Some details.
+%   \end{Version}
 % \end{History}
 %
-% % \PrintChanges
-%
 % \bigskip
 %
 % When you find a mistake or have a suggestion for an improvement of this package,
diff --git a/Master/texmf-dist/source/latex/morefloats/morefloats.ins b/Master/texmf-dist/source/latex/morefloats/morefloats.ins
index b916a22ef5f..a872c84d6d8 100644
--- a/Master/texmf-dist/source/latex/morefloats/morefloats.ins
+++ b/Master/texmf-dist/source/latex/morefloats/morefloats.ins
@@ -8,8 +8,14 @@
 %% 
 %% This is a generated file.
 %% 
-%% IMPORTANT NOTICE:
-%% The usual disclaimers apply:
+%% Project: morefloats
+%% Version: 2011/07/10 v1.0e
+%% 
+%% Copyright (C) 2010, 2011 by
+%%     H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+%% Portions of code copyrighted by other people as marked.
+%% 
+%% The usual disclaimer applys:
 %% If it doesn't work right that's your problem.
 %% (Nevertheless, send an e-mail to the maintainer
 %%  when you find an error in this package.)
@@ -26,26 +32,21 @@
 %% 
 %% This work has the LPPL maintenance status "maintained".
 %% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
+%% The Current Maintainer of this work is H.-Martin Muench.
 %% The main code of this package was invented by
 %% Don Hosek, Quixote 1990/07/27 (Thanks!).
 %% Maintenance has been taken over in September 2010 by H.-Martin M{\accent "7F u}nch.
 %% 
 %% This work consists of the main source file morefloats.dtx
 %% and the derived files
-%%    morefloats.sty, morefloats.ins, morefloats.drv,
-%%    morefloats-example.tex, morefloats.pdf.
+%%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+%%    morefloats-example.tex.
 %% 
 \input docstrip.tex
-
-\obeyspaces
-\Msg{********************************************************}
-\Msg{* Installation                                         *}
-\Msg{* Package: morefloats v1.0d 2011/02/01 LaTeX2e package *}
-\Msg{* Increase limit of unprocessed floats (HMM; DH)       *}
-\Msg{********************************************************}
+\Msg{*************************************************************************************}
+\Msg{* Installation}
+\Msg{* Package: morefloats 2011/07/10 v1.0e Increase limit of unprocessed floats (HMM; DH)}
+\Msg{*************************************************************************************}
 
 \keepsilent
 \askforoverwritefalse
@@ -55,8 +56,14 @@
 
 This is a generated file.
 
-IMPORTANT NOTICE:
-The usual disclaimers apply:
+Project: morefloats
+Version: 2011/07/10 v1.0e
+
+Copyright (C) 2010, 2011 by
+    H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+Portions of code copyrighted by other people as marked.
+
+The usual disclaimer applys:
 If it doesn't work right that's your problem.
 (Nevertheless, send an e-mail to the maintainer
  when you find an error in this package.)
@@ -73,17 +80,15 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-The Current Maintainer of this work is H.-Martin Muench
-(Martin dot Muench at Uni-Bonn dot de).
-
+The Current Maintainer of this work is H.-Martin Muench.
 The main code of this package was invented by
 Don Hosek, Quixote 1990/07/27 (Thanks!).
 Maintenance has been taken over in September 2010 by H.-Martin M\"{u}nch.
 
 This work consists of the main source file morefloats.dtx
 and the derived files
-   morefloats.sty, morefloats.ins, morefloats.drv,
-   morefloats-example.tex, morefloats.pdf.
+   morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+   morefloats-example.tex.
 
 \endpreamble
 \let\MetaPrefix\DoubleperCent
@@ -91,38 +96,37 @@ and the derived files
 \generate{%
   \file{morefloats.ins}{\from{morefloats.dtx}{install}}%
   \file{morefloats.drv}{\from{morefloats.dtx}{driver}}%
-  \file{ltxdoc.cfg}{\from{morefloats.dtx}{ltxdoc}}%
   \usedir{tex/latex/morefloats}%
   \file{morefloats.sty}{\from{morefloats.dtx}{package}}%
   \usedir{doc/latex/morefloats}%
   \file{morefloats-example.tex}{\from{morefloats.dtx}{example}}%
 }
 
-\obeyspaces
-\Msg{**************************************************************}
-\Msg{*                                                            *}
-\Msg{* To finish the installation you have to move the following  *}
-\Msg{* file into a directory searched by TeX:                     *}
-\Msg{*                                                            *}
-\Msg{* morefloats.sty                                             *}
-\Msg{*                                                            *}
-\Msg{* To produce the documentation run the file `morefloats.drv' *}
-\Msg{* through (pdf)LaTeX, e.g.                                   *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*  makeindex -s gind.ist morefloats.idx                      *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*  makeindex -s gind.ist morefloats.idx                      *}
-\Msg{*  pdflatex morefloats.drv                                   *}
-\Msg{*                                                            *}
-\Msg{* At least two runs are necessary e.g. to get the            *}
-\Msg{*  references right!                                         *}
-\Msg{*                                                            *}
-\Msg{* Happy TeXing!                                              *}
-\Msg{*                                                            *}
-\Msg{**************************************************************}
+\catcode32=13\relax% active space
+\let =\space%
+\Msg{************************************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* file into a directory searched by TeX:}
+\Msg{*}
+\Msg{*     morefloats.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file `morefloats.drv'}
+\Msg{* through (pdf)LaTeX, e.g.}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*  makeindex -s gind.ist morefloats.idx}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*  makeindex -s gind.ist morefloats.idx}
+\Msg{*  pdflatex morefloats.drv}
+\Msg{*}
+\Msg{* At least three runs are necessary e.g. to get the}
+\Msg{*  references right!}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*}
+\Msg{************************************************************************}
 
 \endbatchfile
-
 \endinput
 %%
 %% End of file `morefloats.ins'.
diff --git a/Master/texmf-dist/tex/latex/morefloats/morefloats.sty b/Master/texmf-dist/tex/latex/morefloats/morefloats.sty
index ca0ff50ba2b..e7a16b4955b 100644
--- a/Master/texmf-dist/tex/latex/morefloats/morefloats.sty
+++ b/Master/texmf-dist/tex/latex/morefloats/morefloats.sty
@@ -8,8 +8,14 @@
 %% 
 %% This is a generated file.
 %% 
-%% IMPORTANT NOTICE:
-%% The usual disclaimers apply:
+%% Project: morefloats
+%% Version: 2011/07/10 v1.0e
+%% 
+%% Copyright (C) 2010, 2011 by
+%%     H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de>
+%% Portions of code copyrighted by other people as marked.
+%% 
+%% The usual disclaimer applys:
 %% If it doesn't work right that's your problem.
 %% (Nevertheless, send an e-mail to the maintainer
 %%  when you find an error in this package.)
@@ -26,40 +32,38 @@
 %% 
 %% This work has the LPPL maintenance status "maintained".
 %% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
+%% The Current Maintainer of this work is H.-Martin Muench.
 %% The main code of this package was invented by
 %% Don Hosek, Quixote 1990/07/27 (Thanks!).
 %% Maintenance has been taken over in September 2010 by H.-Martin M{\accent "7F u}nch.
 %% 
 %% This work consists of the main source file morefloats.dtx
 %% and the derived files
-%%    morefloats.sty, morefloats.ins, morefloats.drv,
-%%    morefloats-example.tex, morefloats.pdf.
+%%    morefloats.sty, morefloats.pdf, morefloats.ins, morefloats.drv,
+%%    morefloats-example.tex.
 %% 
-\NeedsTeXFormat{LaTeX2e}[1994/06/01]
-\ProvidesPackage{morefloats}[2011/02/01 v1.0d
+\NeedsTeXFormat{LaTeX2e}[2009/09/24]
+\ProvidesPackage{morefloats}[2011/07/10 v1.0e
             Increase limit of unprocessed floats (HMM; DH)]
 
-\RequirePackage{kvoptions}[2010/02/22]% v3.7
-
-%% morefloats may work with an earlier version of that package,
-%% but this was not tested. Please consider updating your package
-%% to the most recent version (if it is not already the most
+\RequirePackage{kvoptions}[2010/12/23]% v3.10
+%% morefloats may work with earlier versions of LaTeX2e and that
+%% package, but this was not tested.
+%% Please consider updating your LaTeX and package
+%% to the most recent version (if they are not already the most
 %% recent version).
 
 \SetupKeyvalOptions{family = morefloats,prefix = morefloats@}
-\DeclareStringOption{maxfloats}% \morefloats@maxfloats
+\DeclareStringOption{maxfloats}%  \morefloats@maxfloats
 \DeclareStringOption{morefloats}% \morefloats@morefloats
 
 \ProcessKeyvalOptions*
 
 \newcounter{maxfloats}
+\setcounter{maxfloats}{0}
 
 \ifx\morefloats@maxfloats\@empty
-  \ifx\morefloats@morefloats\@empty
-    % apply defaults:
+  \ifx\morefloats@morefloats\@empty% apply defaults:
     \gdef\morefloats@maxfloats{36}
     \gdef\morefloats@morefloats{18}
   \else
@@ -120,13 +124,13 @@
   \fi
 \fi
 
-\PackageWarning{maxfloats}{\MessageBreak%
+\PackageWarning{maxfloats}{%
   Maximum number of possible floats asked for: \arabic{maxfloats}.\MessageBreak%
   LaTeX might run out of dimensions or memory\MessageBreak%
   before this (in which case it will notify you).\MessageBreak%
   }
 
-\gdef\@freelist{\@elt\bx@A\@elt\bx@B\@elt\bx@C\@elt\bx@D\@elt\bx@E\@elt\bx@F\@elt\bx@G\@elt\bx@H\@elt%
+\global\long\def\@freelist{\@elt\bx@A\@elt\bx@B\@elt\bx@C\@elt\bx@D\@elt\bx@E\@elt\bx@F\@elt\bx@G\@elt\bx@H\@elt%
 \bx@I\@elt\bx@J\@elt\bx@K\@elt\bx@L\@elt\bx@M\@elt\bx@N\@elt\bx@O\@elt\bx@P\@elt\bx@Q\@elt\bx@R}
 
 \ifnum \value{maxfloats}> 18 \newinsert\bx@S  \expandafter\gdef\expandafter\@freelist\expandafter{\@freelist \@elt\bx@S}
@@ -378,7 +382,7 @@
 \ifnum \value{maxfloats}>264 \newinsert\bx@JE \expandafter\gdef\expandafter\@freelist\expandafter{\@freelist \@elt\bx@JE}
 \ifnum \value{maxfloats}>265 \newinsert\bx@JF \expandafter\gdef\expandafter\@freelist\expandafter{\@freelist \@elt\bx@JF}
 \ifnum \value{maxfloats}>266
-  \PackageError{morefloats}{Too much floats called for}{%
+  \PackageError{morefloats}{Too many floats called for}{%
     You requested more than 266 floats.\MessageBreak%
     (\arabic{maxfloats} to be precise.)\MessageBreak%
     According to my knowledge, LaTeX cannot process\MessageBreak%