tagpair (14may15)

git-svn-id: svn://tug.org/texlive/trunk@37398 c570f23f-e606-0410-a88d-b1316a301751

8 files changed, 707 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/tagpair/COPYING b/Master/texmf-dist/doc/latex/tagpair/COPYING
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/COPYING
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/tagpair/ChangeLog b/Master/texmf-dist/doc/latex/tagpair/ChangeLog
new file mode 100644
index 00000000000..ce0fe909e18
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/ChangeLog
@@ -0,0 +1,2 @@
+2015-05-14:
+ * initial release
diff --git a/Master/texmf-dist/doc/latex/tagpair/README b/Master/texmf-dist/doc/latex/tagpair/README
new file mode 100644
index 00000000000..e5452c33353
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/README
@@ -0,0 +1,14 @@
+The "tagpair" LaTeX package (version 1.0)
+-----------------------------------------
+
+The "tagpair" package provides environments and commands for pairing lines,
+bottom lines, and tagged lines, intended to be used in particular for
+word-by-word glosses, translations, and bibliographic attributions,
+respectively.
+
+The package is released 'as is' with no warranty under the LaTeX Project Public
+License, version 1.3 [1].
+
+Andreas Nolda (andreas@nolda.org)
+----
+[1] Cf. COPYING.
diff --git a/Master/texmf-dist/doc/latex/tagpair/sample.pdf b/Master/texmf-dist/doc/latex/tagpair/sample.pdf
new file mode 100644
index 00000000000..ccee650eeb9
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/sample.pdf
diff --git a/Master/texmf-dist/doc/latex/tagpair/sample.tex b/Master/texmf-dist/doc/latex/tagpair/sample.tex
new file mode 100644
index 00000000000..fba1e56068e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/sample.tex
@@ -0,0 +1,115 @@
+\documentclass[a4paper]{ltxdoc}
+\usepackage{tagpair}
+\usepackage{hang}
+\usepackage[hidelinks]{hyperref}
+\usepackage{polyglossia}
+\setdefaultlanguage{english}
+\setotherlanguage{dutch}
+\setlength{\leftmargini}{2em}
+\frenchspacing
+\sloppy
+
+\begin{document}
+\title{Sample use of the \textsf{tagpair} package}
+\author{Andreas Nolda}
+\date{2015/05/14}
+\maketitle
+
+\section{Pairing lines}
+
+\begin{quote}
+\DescribeMacro{paringline}\begin{pairingline}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{voorbeeldje}}}{little example}
+\pairing{\textdutch{\textit{in}}}{in}
+\pairing{\textdutch{\textit{het}}}{}
+\pairing{\textdutch{\textit{Nederlands.}}}{Dutch}
+\end{pairingline}
+\end{quote}
+
+\begin{quote}
+\DescribeMacro{paringline}\begin{pairingline}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{lange}}}{long}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\pairing{\textdutch{\textit{En}}}{and}
+\pairing{\textdutch{\textit{dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{zeer}}}{very}
+\pairing{\textdutch{\textit{lange}}}{long}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\end{pairingline}
+\end{quote}
+
+\section{Bottom lines}
+
+\begin{quote}
+\textdutch{\textit{Dit is een voorbeeld.}}
+\bottomline{\DescribeMacro{\bottomline}`This is an example.'}
+\end{quote}
+
+\begin{quote}
+\textdutch{\textit{Dit is een voorbeeldje in het Nederlands.}}
+\bottomline{\DescribeMacro{\bottomline}`This is a short example in Dutch.'}
+\end{quote}
+
+\section{Tagged lines}
+
+\begin{quote}
+\DescribeMacro{taggedline}\begin{taggedline}{(Marcel R. van der Goot 1990)}
+\textdutch{\textit{Dit is een Nederlands voorbeeld.}}
+\end{taggedline}
+\end{quote}
+
+\begin{quote}
+\DescribeMacro{taggedline}\begin{taggedline}{(Marcel R. van der Goot 1990)}
+\textdutch{\textit{Dit is een voorbeeldje in het Nederlands.}}
+\end{taggedline}
+\end{quote}
+
+\section{Putting them all together}
+
+\begin{quote}
+\DescribeMacro{paringline}\DescribeMacro{taggedline}\begin{taggedline}{(my
+example)}
+\begin{pairingline}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\end{pairingline}
+\bottomline{\DescribeMacro{\bottomline}`This is an example.'}
+\end{taggedline}
+\end{quote}
+
+\begin{quote}
+\DescribeMacro{paringline}\DescribeMacro{taggedline}\begin{taggedline}{(Marcel
+R. van der Goot 1990)}
+\begin{pairingline}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{voorbeeldje}}}{little example}
+\pairing{\textdutch{\textit{in}}}{in}
+\pairing{\textdutch{\textit{het}}}{}
+\pairing{\textdutch{\textit{Nederlands.}}}{Dutch}
+\end{pairingline}
+\end{taggedline}
+\bottomline{\DescribeMacro{\bottomline}`This is a short example in Dutch.'}
+\end{quote}
+
+\section*{\refname}
+\begin{hangingpar}
+Marcel R. van der Goot (1990). Midnight Macros: \textsf{gloss.tex}.
+\url{http://mirrors.ctan.org/macros/generic/midnight/midnight.pdf}.
+\end{hangingpar}
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/tagpair/tagpair.pdf b/Master/texmf-dist/doc/latex/tagpair/tagpair.pdf
new file mode 100644
index 00000000000..9b1c89bf03d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/tagpair.pdf
diff --git a/Master/texmf-dist/doc/latex/tagpair/tagpair.tex b/Master/texmf-dist/doc/latex/tagpair/tagpair.tex
new file mode 100644
index 00000000000..3dbba1a67fc
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tagpair/tagpair.tex
@@ -0,0 +1,109 @@
+\documentclass[a4paper]{ltxdoc}
+\usepackage{tagpair}
+\usepackage{hang}
+\usepackage[hidelinks]{hyperref}
+\usepackage{polyglossia}
+\setdefaultlanguage{english}
+\setotherlanguage{dutch}
+\setlength{\parindent}{1em}
+\setlength{\leftmargini}{2em}
+\frenchspacing
+\sloppy
+
+\begin{document}
+\title{\textsf{tagpair} -- word-by-word glosses, translations, and bibliographic
+attributions}
+\author{Andreas Nolda}
+\date{2015/05/14 (v.\,1.0)}
+\maketitle
+
+\noindent The \textsf{tagpair} package provides environments and commands for
+pairing lines, bottom lines, and tagged lines, intended to be used in particular
+for word-by-word glosses, translations, and bibliographic attributions,
+respectively.
+
+This \LaTeX{} package is inspired by Marcel R. van der Goot's classic Plain
+\TeX{} macros in \textsf{gloss.tex} \hyperlink{goot}{[1]}.
+
+\section{Pairing lines}
+
+An \emph{pairing line} is a horizontal line consisting of \emph{pairings} of
+vertically stacked horizontal text boxes:
+\begin{quote}
+\begin{pairingline}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\pairing{\textdutch{\textit{Dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{lange}}}{long}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\pairing{\textdutch{\textit{En}}}{and}
+\pairing{\textdutch{\textit{dit}}}{this}
+\pairing{\textdutch{\textit{is}}}{is}
+\pairing{\textdutch{\textit{een}}}{a}
+\pairing{\textdutch{\textit{zeer}}}{very}
+\pairing{\textdutch{\textit{lange}}}{long}
+\pairing{\textdutch{\textit{voorbeeld.}}}{example}
+\end{pairingline}
+\end{quote}
+The width of a pairing is the width of its widest text box. Pairing lines are
+automatically broken across text lines, as can be seen from the above example.
+
+\DescribeMacro{pairingline}\DescribeMacro{\pairing} For pairing lines, the
+package provides the |pairingline| environment, which should contain one or more
+|\pairing| commands. A |\pairing| command, in turn, has an \meta{upper text} and
+a \meta{lower text} argument:
+\begin{quote}
+|\begin{pairingline}| \\
+|\pairing{|\meta{upper text}|}{|\meta{lower text}|}| \\
+\vdots \\
+|\end{pairingline}|
+\end{quote}
+
+\section{Bottom lines}
+
+A \emph{bottom line} is a horizontal line vertically below another one:
+\begin{quote}
+\textdutch{\textit{Dit is een voorbeeld.}}
+\bottomline{`This is an example.'}
+\end{quote}
+
+\DescribeMacro{\bottomline} The |\bottomline| command sets a bottom line with
+\meta{bottom text} below some \meta{preceding text}:
+\begin{quote}
+\meta{preceding text} \\
+|\bottomline{|\meta{bottom text}|}|
+\end{quote}
+
+\section{Tagged lines}
+
+A \emph{tagged line} is a horizontal line with a \emph{tag} set flush right on
+the same line or on the next one if it does not fit into the remaining space:
+\begin{quote}
+\begin{taggedline}{(Marcel R. van der Goot 1990)}
+\textdutch{\textit{Dit is een Nederlands voorbeeld.}}
+\end{taggedline}
+\end{quote}
+\begin{quote}
+\begin{taggedline}{(Marcel R. van der Goot 1990)}
+\textdutch{\textit{Dit is een voorbeeldje in het Nederlands.}}
+\end{taggedline}
+\end{quote}
+
+\DescribeMacro{taggedline} The |taggedline| environment sets a tagged line
+\meta{text} with tag \meta{tag}:
+\begin{quote}
+|\begin{taggedline}{|\meta{tag}|}| \\
+\meta{text} \\
+|\end{taggedline}|
+\end{quote}
+
+\section*{\refname}
+\begin{labeledpar}{{[1]}}{\hypertarget{goot}{[1]}}
+Marcel R. van der Goot (1990). Midnight Macros: \textsf{gloss.tex}.
+\url{http://mirrors.ctan.org/macros/generic/midnight/midnight.pdf}.
+\end{labeledpar}
+\end{document}
diff --git a/Master/texmf-dist/tex/latex/tagpair/tagpair.sty b/Master/texmf-dist/tex/latex/tagpair/tagpair.sty
new file mode 100644
index 00000000000..bd66e0efb93
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/tagpair/tagpair.sty
@@ -0,0 +1,51 @@
+\ProvidesPackage{tagpair}[2015/05/14 v1.0 Word-by-word glosses, translations,
+and bibliographic attributions]
+
+% Copyright (C) 2015 Andreas Nolda
+
+% Author: Andreas Nolda <andreas@nolda.org>
+% Version: 1.0
+
+% This work may be distributed and/or modified under the conditions of the LaTeX
+% Project Public License, either version 1.3 of this license or (at your option)
+% any later version. The latest version of this license is in
+% http://www.latex-project.org/lppl.txt and version 1.3 or later is part of all
+% distributions of LaTeX version 2005/12/01 or later.
+
+% The following code is inspired by Marcel R. van der Goot's classic "gloss.tex".
+
+\RequirePackage{varwidth}
+
+\newsavebox{\t@g}
+\newsavebox{\p@irs}
+
+% cf. the "\narrowragged" command in the "varwidth" package
+\newcommand{\narrowraggedleft}{\rightskip\z@skip%
+  \leftskip\z@ plus \hsize%
+  \parfillskip\z@skip}
+
+\newenvironment{taggedline}[2][0.75]%
+  {\def\linewidthfactor{#1}%
+   \savebox{\t@g}{#2}%
+   \ignorespaces}%
+  {\unskip%
+   \hfil\penalty0%
+   \hskip1em%
+   \hbox{}%
+   \nobreak%
+   \hfill%
+   \begin{varwidth}[t]{\linewidthfactor\linewidth}
+     \narrowraggedleft\strut\unhbox\t@g
+   \end{varwidth}}
+
+\newenvironment{pairingline}%
+  {\begin{lrbox}{\p@irs}}%
+  {\end{lrbox}%
+   \unhbox\p@irs}
+
+\newcommand{\pairing}[2]%
+  {\vtop{\hbox{\strut\smash{#1}}%
+         \hbox{\strut\smash{#2}}}}
+
+\newcommand{\bottomline}[1]%
+  {\par\nopagebreak #1}