pst-pad updae (21mar08)

git-svn-id: svn://tug.org/texlive/trunk@7066 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 494 insertions, 86 deletions

diff --git a/Master/texmf-dist/doc/generic/pst-pad/CHANGES b/Master/texmf-dist/doc/generic/pst-pad/CHANGES
index 36bd6995380..a63f92eeec4 100644
--- a/Master/texmf-dist/doc/generic/pst-pad/CHANGES
+++ b/Master/texmf-dist/doc/generic/pst-pad/CHANGES
@@ -1,5 +1,14 @@
+pst-pad-doc-header.tex:
+
+2008-03-21	version 0.3b: added common header for german/english docs
+
+pst-pad-docDE.tex|pdf:
+
+2008-03-21	version 0.3b: added german docs
+
 pst-pad-doc.tex|pdf:
 
+2008-03-21	version 0.3b: doc fix
 2008-02-21	version 0.3a: changed email address
 2008-02-19	version 0.3: first CTAN release (rev 319)
 
diff --git a/Master/texmf-dist/doc/generic/pst-pad/README b/Master/texmf-dist/doc/generic/pst-pad/README
index ec0a1a391e6..d0f4180e889 100644
--- a/Master/texmf-dist/doc/generic/pst-pad/README
+++ b/Master/texmf-dist/doc/generic/pst-pad/README
@@ -7,12 +7,15 @@ pst-pad is a PSTricks package for drawing simple attachment systems.
 Contents:
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
-Makefile         - Makefile for PDF documentation
-pst-pad.sty      - The LaTeX file
-pst-pad.tex      - The TeX file
-pst-pad-doc.pdf  - The documentation
-pst-pad-doc.tex  - The documentation (source)
-showexpl.cfg     - Configuration file for showexpl.sty
+Makefile                - Makefile for PDF documentation
+pst-pad.sty             - The LaTeX file
+pst-pad.tex             - The TeX file
+pst-pad-doc.pdf         - The english documentation
+pst-pad-doc.tex         - The english documentation (source)
+pst-pad-docDE.pdf       - The german documentation
+pst-pad-docDE.tex       - The german documentation (source)
+pst-pad-doc-header.tex  - Common header for EN/DE documentation
+showexpl.cfg            - Configuration file for showexpl.sty
 
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
diff --git a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.pdf b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.pdf
index 37ffe49dd37..65bca95c6ab 100644
--- a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.pdf
+++ b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.pdf
diff --git a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.tex b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.tex
index 49a7ca1a699..bcaa33ad851 100644
--- a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.tex
+++ b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-doc.tex
@@ -2,62 +2,20 @@
 %% 
 %% Author: Patrick Drechsler
 %% 
-%% Copyright
-%% 
 %% Created: Fri Feb  8 02:04:17 2008
 %% 
-%% Version: $Id: pst-pad-doc.tex 320 2008-02-20 17:50:01Z patrick $
+%% Version: $Id: pst-pad-doc.tex 328 2008-03-21 15:22:10Z patrick $
 %% 
 \listfiles
 \documentclass{scrartcl}
-\setkomafont{disposition}{\normalcolor\rmfamily\bfseries}
-\usepackage[T1]{fontenc} 				
-\usepackage[utf8]{inputenc}
-
-\usepackage{fixltx2e}% standard LaTeX package...
-\usepackage{lmodern}
-\usepackage[scaled=0.85]{beramono}
-\usepackage{fancyhdr}
-\usepackage[obeyspaces]{url}
-\usepackage{xcolor}%
-\usepackage{amsmath}
-\usepackage{pst-pad}
-\let\verPstPad\fileversion
-\usepackage{multicol}
-\usepackage{showexpl}
-%
-\makeatletter
-\def\@UrlFont{\small\ttfamily}
-\renewenvironment{description}
-  {\list{}{\labelwidth\z@ \itemindent-\leftmargin
-    \itemsep0pt \parsep0pt
-    \let\makelabel\descriptionlabel}}
-  {\endlist}
-
-\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}}
-\def\PS{PostScript}
-\newcommand{\PadPackage}{\textsf{`pst-pad'}}
-
-\lhead{\PadPackage}\rhead{A PSTricks package for drawing attachment models}
-\pagestyle{fancy}
-
-\psset{subgriddiv=0,griddots=10,gridlabels=7pt}%
-%\showgrid
-% \usepackage[colorlinks,linktocpage]{hyperref}
-\usepackage{hyperref}
-
-\newcommand{\macro}[1]{\texttt{#1}}
-\newcommand{\parameter}[1]{\texttt{#1}}
-
-\definecolor{mygreen}{rgb}{0,.5,0}
-\definecolor{mybrown}{rgb}{.6,0,0}
-
-\newcommand{\ParCol}[3]{\textbf{\shortstack{#1 \color{mygreen}(#2)\\ \color{mybrown}(#3)}}}
+\usepackage[english]{babel}
+\input{pst-pad-doc-header}
+\newcommand{\summary}{A PSTricks package for drawing attachment models}
 
 \begin{document}
+\EnableQuotes
 
-\title{\texttt{pst-pad}\\ A PSTricks package for drawing attachment
-  mechanisms\\\normalsize ver. \verPstPad} \author{Patrick
+\title{\texttt{pst-pad}\\\summary\\\normalsize ver. \verPstPad} \author{Patrick
   Drechsler\thanks{\url{<Patrick.Drechsler@pstricks.de>}}} \date{\today}
 \maketitle
 
@@ -85,7 +43,7 @@ research.
 \section{Parameters}
 \label{sec:parameters}
 
-There are specific paramaters defined to easily change the behaviour of the pst-pad
+There are specific parameters defined to easily change the behaviour of the pst-pad
 objects you are drawing.
 
 \let\HLTTc\textsf
@@ -126,7 +84,7 @@ objects you are drawing.
 
 \clearpage
 
-\section{High-level Macros (``Objects'')}
+\section{High-level Macros ("Objects")}
 \label{sec:high-level-macros}
 
 There are three high-level macros: \macro{PstWallToWall},
@@ -222,29 +180,29 @@ default and example values, respectively.
   \nbput{\ParCol{FSphereHeight/2}{2}{2}}
   %% Label FSphereFillColor:
   \psline{->}(-.1,2.2)(-.3,1.6)
-  \rput(-.1,2.6){\ParCol{FSphereFillColor}{``lightgray''}{``green!20!white''}}
+  \rput(-.1,2.6){\ParCol{FSphereFillColor}{"lightgray"}{"green!20!white"}}
   %% Label FluidFillColor:
   \psline{->}(4,2.2)(2.5,.6)
-  \rput(4,2.6){\ParCol{FluidFillColor}{``yellow''}{``blue!10!white''}}
+  \rput(4,2.6){\ParCol{FluidFillColor}{"yellow"}{"blue!10!white"}}
   %% Label FluidLineWidth:
   \psline{->}([offset=.5,nodesep=3]minradiusRight)(minradiusRight)
   \rput[l]([offset=-.1,nodesep=3.2]minradiusRight){\ParCol{FluidLineWidth}{1pt}{1.5pt}}
-  \rput[l]([offset=.8,nodesep=3.2]minradiusRight){\ParCol{FluidLineColor}{``black''}{``green!50!black''}}
+  \rput[l]([offset=.8,nodesep=3.2]minradiusRight){\ParCol{FluidLineColor}{"black"}{"green!50!black"}}
   %% Label FSphereLineWidth:
   \psline{->}(-4.3,2.2)(-3.5,1)
   \rput(-4.3,2.6){\ParCol{FSphereLineWidth}{1pt}{0.1pt}}
-  \rput(-4.3,3.4){\ParCol{FSphereLineColor}{``black''}{``magenta''}}
+  \rput(-4.3,3.4){\ParCol{FSphereLineColor}{"black"}{"magenta"}}
   %% Label WallLineWidth:
   \psline{->}(1.5,-2.25)(1.5,-1)
   \rput[t](1.5,-2.5){\ParCol{WallLineWidth}{1pt}{3pt}}
-  \rput[t](1.5,-3.4){\ParCol{WallLineColor}{``black''}{``blue''}}
+  \rput[t](1.5,-3.4){\ParCol{WallLineColor}{"black"}{"blue"}}
 \end{pspicture}
 
 \subsection{Liquid shearing}
 \label{sec:liquid-shearing}
 
 Sheared liquids sandwiched in between two surfaces can also be displayed.  The
-following figure shows the usage of the
+following figures shows the usage of the
 parameters \parameter{FluidShearOffsetX}
 and \parameter{FluidShearOffsetY}. Again, green and brown colored values in
 parentheses give default and example values, respectively.
diff --git a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.pdf b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.pdf
new file mode 100644
index 00000000000..ce1858c244b
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.pdf
diff --git a/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.tex b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.tex
new file mode 100644
index 00000000000..05329421cfb
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-pad/pst-pad-docDE.tex
@@ -0,0 +1,436 @@
+%% Filename: pst-pad-docDE.tex
+%% 
+%% Author: Patrick Drechsler
+%% 
+%% Created: Fri Mar  21 13:05:37 2008
+%% 
+%% Version: $Id: pst-pad-docDE.tex 329 2008-03-21 15:23:21Z patrick $
+%% 
+\listfiles
+\documentclass{scrartcl}
+\usepackage[ngerman]{babel}
+\input{pst-pad-doc-header}
+\newcommand{\summary}{Ein PSTricks Packet zum Zeichnen von Haftmodellen}
+\newcommand{\zB}{z.\,B.~}
+
+\begin{document}
+%% Anführungszeichen aktivieren:
+\EnableQuotes
+
+\title{\texttt{pst-pad}\\\summary\\\normalsize ver. \verPstPad} \author{Patrick
+  Drechsler\thanks{\url{<Patrick.Drechsler@pstricks.de>}}} \date{\today}
+\maketitle
+
+\begin{abstract}
+\PadPackage{}: \summary.
+\end{abstract}
+
+\setlength{\columnseprule}{0.6pt}
+\begin{multicols}{2}
+{\parskip 0pt \tableofcontents}
+\end{multicols}
+
+\section{Einleitung}
+\label{sec:introduction}
+
+Das Packet \PadPackage{} ist eine kleine Sammlung von PSTricks Makros um
+Adhäsions- und Reibungssysteme darzustellen (\zB JKR- oder Hertz-Theorie,
+Grenzflächenreibung, (elasto-)hydrodynamische Reibung). Die zur Verfügung
+gestellten Makros erlauben den zwei beteiligten Körpern unterschiedliche Formen
+zu geben (planar, kugelförmig, elastisch) sowie einen optionalen
+Flüssigkeitsfilm zwischen dise Körper zu platzieren. Der Name \PadPackage{}
+kommt vom englischen Begriff für Haftorgane bei Tieren ("attachment pads"),
+meinem früheren Forschungsgebiet.
+
+\section{Parameter}
+\label{sec:parameters}
+
+Die folgenden Parameter stehen zur Verfügung.
+
+\let\HLTTc\textsf
+%\begin{multicols}{2}
+\begin{description}
+\item[\HLTTc{fluid} (boolean):] (\emph{default:~true})
+\item[\HLTTc{WallThickness} (dimension):] (\emph{default:~1})
+\item[\HLTTc{WallString} (string):] (\emph{default:~})
+\item[\HLTTc{WallAngle} (PSTricks color):] (\emph{default:~0})
+\item[\HLTTc{WallLineWidth} (dimension):] (\emph{default:~1pt})
+\item[\HLTTc{WallLineColor} (PSTricks color):] (\emph{default:~black})
+\item[\HLTTc{SphereStartAngle} (dimension):] (\emph{default:~180})
+\item[\HLTTc{SphereEndAngle} (boolean):] (\emph{default:~360})
+\item[\HLTTc{SphereRadius} (dimension):] (\emph{default:~1})
+\item[\HLTTc{ShpereString} (string):] (\emph{default:~})
+\item[\HLTTc{SphereOffset} (dimension):] (\emph{default:~0})
+\item[\HLTTc{SphereFillColor} (PSTricks color):] (\emph{default:~white})
+\item[\HLTTc{SphereLineWidth} (dimension):] (\emph{default:~1pt})
+\item[\HLTTc{SphereLineColor} (PSTricks color):] (\emph{default:~black})
+\item[\HLTTc{FSphereHeight} (dimension):] (\emph{default:~2})
+\item[\HLTTc{FSphereFillColor} (PSTricks color):] (\emph{default:~lightgray})
+\item[\HLTTc{FSphereString} (string):] (\emph{default:~})
+\item[\HLTTc{FSphereLineWidth} (dimension):] (\emph{default:~1pt})
+\item[\HLTTc{FSphereLineColor} (PSTricks color):] (\emph{default:~black})
+\item[\HLTTc{FluidMaxRadius} (dimension):] (\emph{default:~1})
+\item[\HLTTc{FluidMinRadius} (dimension):] (\emph{default:~.5})
+\item[\HLTTc{FluidHeight} (dimension):] (\emph{default:~.5})
+\item[\HLTTc{FluidFillColor} (PSTricks color):] (\emph{default:~yellow})
+\item[\HLTTc{FluidString} (string):] (\emph{default:~})
+\item[\HLTTc{FluidShearOffsetX} (dimension):] (\emph{default:~0})
+\item[\HLTTc{FluidShearOffsetY} (dimension):] (\emph{default:~0})
+\item[\HLTTc{FluidLineWidth} (dimension):] (\emph{default:~1pt})
+\item[\HLTTc{FluidLineColor} (PSTricks color):] (\emph{default:~black})
+\item[\HLTTc{StringA} (string):] (\emph{default:~})
+\item[\HLTTc{StringB} (string):] (\emph{default:~})
+\item[\HLTTc{TotalAngle} (angle):] (\emph{default:~0})
+\end{description}
+
+\clearpage
+
+\section{High-level Makros ("Objekte")}
+\label{sec:high-level-macros}
+
+Es gibt drei "high-level" Makros: \macro{PstWallToWall},
+\macro{PstSphereToWall} and \macro{PstPad}.
+
+\subsection{\macro{PstWallToWall}}
+\label{sec:macropstwalltowall}
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \PstWallToWall(2,2)
+\end{pspicture}
+\end{LTXexample}
+
+\subsection{\macro{PstSphereToWall}}
+\label{sec:macropstspheretowall}
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \PstSphereToWall[fluid=false](2,2)
+\end{pspicture}
+\end{LTXexample}
+
+
+\subsection{\macro{PstPad}}
+\label{sec:macropstpad}
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \PstPad(2,2)
+\end{pspicture}
+\end{LTXexample}
+
+\clearpage
+
+\subsection{Anwendung}
+\label{sec:basic-usage}
+
+Die folgende Abbildung zeigt die Verwendung des Makros \macro{PstPad} und
+einiger Parameter. Grün und braun gefärbte Werte in Klammern zeigen die
+voreingestellten und im Beispiel verwendeten Werte.
+
+\begin{pspicture}(-5,-4)(7.5,4)%\psgrid
+  \PstPad[%
+  FluidMaxRadius=4,%
+  FluidMinRadius=3,%
+  FluidHeight=1,%
+  FSphereHeight=2,%
+  FSphereFillColor=green!20!white,%
+  FluidFillColor=blue!10!white,%
+  FluidLineWidth=1.5pt,%
+  FSphereLineWidth=0.1pt,%
+  WallLineWidth=3pt,%
+  WallLineColor=blue,%
+  FSphereLineColor=magenta,%
+  FluidLineColor=green!50!black%
+  ](0,0)
+  %%
+  \sffamily\footnotesize%
+  \psset{linecolor=gray, linewidth=0.2pt}
+  %% "Crosshair" for orientation:
+  \psline[linestyle=dashed](-5,0)(5,0)
+  \psline[linestyle=dashed](0,-3)(0,1.5)
+  %% Node definitions:
+  \pnode(0,0){center}
+  \pnode(-4,-2.25){maxradiusLeft}
+  \pnode(0,-2.25){maxradiusRight}
+  \pnode(-3,0){minradiusLeft}
+  \pnode(3,0){minradiusRight}
+  \pnode([nodesep=4.5]center){fluidheightCenter}
+  \pnode([nodesep=4.5,offset=-1]center){fluidheightBottom}
+  \pnode([offset=-1]fluidheightBottom){wallThicknessBottom}
+  \pnode([nodesep=5.2,offset=1]center){fsphereheightBottom}
+  \pnode([offset=1]fsphereheightBottom){fsphereheightTop}
+  %%
+  \psset{arrows=|<->|,linewidth=0.8pt,linecolor=red,arrowscale=1.5}
+  %% Center:
+  \rput[l]([nodesep=.2,offset=.2]center){\textbf{(0,0)}}
+  %% Label FluidMinRadius:
+  \ncline{minradiusLeft}{center}
+  \nbput{\ParCol{FluidMinRadius}{0.5}{3}}
+  %% Label FluidMaxRadius:
+  \ncline{maxradiusLeft}{maxradiusRight}
+  \nbput{\ParCol{FluidMaxRadius}{1}{4}}
+  %% Label FluidHeight:
+  \ncline{fluidheightCenter}{fluidheightBottom}
+  \naput{\ParCol{FluidHeight}{.5}{1}}
+  %% Label WallThickness:
+  \ncline{fluidheightBottom}{wallThicknessBottom}
+  \naput{\ParCol{WallThickness}{1}{1}}
+  %% Label FSpereHeight:
+  \ncline{fsphereheightBottom}{fsphereheightTop}
+  \nbput{\ParCol{FSphereHeight/2}{2}{2}}
+  %% Label FSphereFillColor:
+  \psline{->}(-.1,2.2)(-.3,1.6)
+  \rput(-.1,2.6){\ParCol{FSphereFillColor}{"lightgray"}{"green!20!white"}}
+  %% Label FluidFillColor:
+  \psline{->}(4,2.2)(2.5,.6)
+  \rput(4,2.6){\ParCol{FluidFillColor}{"yellow"}{"blue!10!white"}}
+  %% Label FluidLineWidth:
+  \psline{->}([offset=.5,nodesep=3]minradiusRight)(minradiusRight)
+  \rput[l]([offset=-.1,nodesep=3.2]minradiusRight){\ParCol{FluidLineWidth}{1pt}{1.5pt}}
+  \rput[l]([offset=.8,nodesep=3.2]minradiusRight){\ParCol{FluidLineColor}{"black"}{"green!50!black"}}
+  %% Label FSphereLineWidth:
+  \psline{->}(-4.3,2.2)(-3.5,1)
+  \rput(-4.3,2.6){\ParCol{FSphereLineWidth}{1pt}{0.1pt}}
+  \rput(-4.3,3.4){\ParCol{FSphereLineColor}{"black"}{"magenta"}}
+  %% Label WallLineWidth:
+  \psline{->}(1.5,-2.25)(1.5,-1)
+  \rput[t](1.5,-2.5){\ParCol{WallLineWidth}{1pt}{3pt}}
+  \rput[t](1.5,-3.4){\ParCol{WallLineColor}{"black"}{"blue"}}
+\end{pspicture}
+
+\subsection{Scherender Flüssigkeitsfilm}
+\label{sec:liquid-shearing}
+
+Flüssigkeitsfilme zwischen zwei Oberflächen können auch mit einer Scherung
+dargestellt werden. Die folgenden Abbildungen zeigt die Verwendung der
+Parameter \parameter{FluidShearOffsetX} und \parameter{FluidShearOffsetY}. Grün
+und braun gefärbte Werte in Klammern zeigen wieder die Voreinstellung und die
+Beispielwerte.
+
+\subsubsection[\parameter{FluidShearOffsetX}]{Parameter \parameter{FluidShearOffsetX}}
+\label{sec:param-offsetx}
+
+\parameter{FluidShearOffsetX}\ beschreibt den Offset vom Wert des
+Parameters \parameter{FluidMaxRadius} in x Richtung.
+
+\begin{center}
+  \begin{pspicture}[showgrid=false](-5,-2)(4.5,2)%
+    \PstPad[%
+    FluidHeight=1,%
+    FluidShearOffsetX=0.6%
+    ](0,0)
+    %% Labeling:
+    \sffamily\footnotesize%
+    \psset{linecolor=black, linewidth=0.2pt}
+    \psline[linestyle=dotted](-2.5,0)(1.5,0)
+    \psline[linestyle=dotted](0,-1)(0,1.5)
+    
+    %% Node definitions:
+    \pnode(0,0){center}
+    \pnode(-1,-2.25){maxradiusLeft}
+    \pnode(0,-2.25){maxradiusRight}
+    
+    \pnode(-1,0){maxradiusLeftZero}
+    \pnode(0,0){maxradiusRightZero}
+    
+    \pnode([nodesep=-0.6]maxradiusLeft){Xoffset}
+    \pnode([nodesep=-0.6]maxradiusLeftZero){XoffsetZero}
+    
+    \psline[linestyle=dotted]([offset=-1]maxradiusLeftZero)([offset=.5]maxradiusLeftZero)
+    \psline[linestyle=dotted]([offset=-1]XoffsetZero)([offset=.5]XoffsetZero)
+    %% 
+    %% 
+    \psset{arrowscale=2,arrows=|<->|}
+    %% Label FluidMaxRadiusLeft:
+    \ncline{maxradiusLeft}{maxradiusRight}
+    \nbput[npos=0.5]{\ParCol{FluidMaxRadius}{1}{1}}
+    %% Label FluidShearOffsetX:
+    \ncline[linecolor=red]{maxradiusLeftZero}{XoffsetZero}
+    \nbput[npos=1.6]{\ParCol{FluidShearOffsetX}{0}{.6}}
+  \end{pspicture}
+\end{center}
+
+\subsubsection[\parameter{FluidShearOffsetY}]{Parameter \parameter{FluidShearOffsetY}}
+\label{sec:param-offsety}
+
+Mit dem Parameter \parameter{FluidShearOffsetY}\ kann der Krümmungsradius des
+Flüssigkeitmeniskus beeinflußt werden. Der Parameter beschreibt den Offset von
+Null in y Richtung.
+
+\begin{center}
+  \begin{pspicture}[showgrid=false](-4.5,-2)(4.5,2)%
+    \PstPad[%
+    FluidHeight=1,%
+    FluidShearOffsetY=0.4%
+    ](0,0)
+    %% Labeling:
+    \sffamily\footnotesize%
+    \psset{linecolor=black, linewidth=0.2pt}
+    \psline[linestyle=dotted](-2.5,0)(1.5,0)
+    \psline[linestyle=dotted](0,-1)(0,1.5)
+    %% Node definitions:
+    \pnode(0,0){center}
+    \pnode([nodesep=1.5]center){fluidheightCenterRight}
+    \pnode([nodesep=-1.5]center){fluidheightCenterLeft}
+    \pnode([nodesep=-1.5,offset=1]center){fluidheightTop}
+    \pnode([offset=-0.4]fluidheightCenterRight){Yoffset}
+    %% 
+    \psline[linestyle=dotted](0,-.4)(1.7,-.4)
+    %% 
+    \psset{arrowscale=2,arrows=|<->|}
+    %% Label FluidHeight:
+    \ncline{fluidheightCenterLeft}{fluidheightTop}
+    \naput{\ParCol{FluidHeight}{.5}{1}}
+    %% Label FluidShearOffsetY:
+    \ncline[linecolor=red]{fluidheightCenterRight}{Yoffset}
+    \naput{\ParCol{FluidShearOffsetY}{0}{.4}}
+  \end{pspicture}
+\end{center}
+
+
+\subsection{Drehwinkel}
+\label{sec:tilting-parameters}
+
+Die folgende Abbildung demonstriert die Verwendung des
+Parameters \parameter{TotalAngle} um die Abbildung zu drehen. Der
+voreingestellte Drehwinkel beträgt 0 Grad. Grün und braun gefärbte Werte in
+Klammern zeigen wieder die Voreinstellung und die Beispielwerte.
+
+\begin{center}
+\begin{pspicture}(-2.5,-2)(4,2.5)%
+  %%
+  \PstPad[TotalAngle=30](0,0)
+  %% Labeling:
+  \sffamily\footnotesize%
+  \psset{linecolor=black, linewidth=0.2pt}
+  \psline[linestyle=dotted](-2.5,0)(2.5,0)
+  \psline[linestyle=dotted](0,-1)(0,1.5)
+  \rput{30}{%
+    \psline[linestyle=dashed](-2.5,0)(2.5,0)
+    \psline[linestyle=dashed](0,-1)(0,1.5)
+  }
+  \pnode(0,0){center}
+  \psset{linecolor=red}
+  \psarc[arrowscale=2]{<->}(center){2.25}{0}{30}
+  \rput[l]([nodesep=2.5,angle=15]center){%
+    \ParCol{TotalAngle}{0}{30}}%
+\end{pspicture}
+\end{center}
+
+\section{Beispiele}
+\label{sec:example-usage}
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \PstWallToWall[%
+  FluidFillColor=red,%
+  TotalAngle=10%
+  ](2,2)
+\end{pspicture}
+\end{LTXexample}
+
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \tiny\sffamily%
+  \PstPad[%
+  FluidFillColor=blue!30!white,%
+  FluidLineColor=blue!70!black,%
+  FSphereFillColor=yellow!40!white,%
+  FSphereLineColor=red!70!black,%
+  FluidString={fluid A},%
+  FluidShearOffsetX=0.1,%
+  FluidShearOffsetY=0.2,%
+  WallThickness=0.4,%
+  FSphereHeight=1,%
+  StringA={sliding insect pad}%
+  ](2,2)
+\end{pspicture}
+\end{LTXexample}
+
+
+\begin{LTXexample}[width=5cm]
+\begin{pspicture}(4,4)\psgrid
+  \PstSphereToWall[%
+  fluid=false,%
+  SphereRadius=1.5,%
+  SphereStartAngle=190,%
+  SphereEndAngle=350,%
+  SphereOffset=0.1,%
+  StringA={string a},%
+  StringB={string b}%
+  ](2,2)
+\end{pspicture}
+\end{LTXexample}
+
+\section{Low-level Makros}
+\label{sec:low-level-macros}
+
+Es gibt vier "low-level" Makros: \macro{PstWall}, \macro{PstFluid},
+\macro{PstSphere} und \macro{PstFlattenedSphere}.
+
+\subsection{\macro{PstWall}}
+\label{sec:macropstwall}
+
+\begin{LTXexample}[width=5cm]
+  \begin{pspicture}[showgrid=true](4,2)
+    \PstWall(2,1.5)
+  \end{pspicture}
+\end{LTXexample}
+
+\subsection{\macro{PstFluid}}
+\label{sec:macropstfluid}
+
+\begin{LTXexample}[width=5cm]
+  \begin{pspicture}[showgrid=true](4,2)
+    \rput(2,1){\PstFluid[unit=1pt](0,0)}
+  \end{pspicture}
+\end{LTXexample}
+
+
+\clearpage
+
+\subsection{\macro{PstSphere}}
+\label{sec:macropstsphere}
+
+\begin{LTXexample}[width=5cm]
+  \begin{pspicture}[showgrid=true](4,2)
+    \PstSphere(2,.5)
+  \end{pspicture}
+\end{LTXexample}
+
+\subsection{\macro{PstFlattenedSphere}}
+\label{sec:macr}
+
+\begin{LTXexample}[width=5cm]
+  \begin{pspicture}[showgrid=true](4,2)
+    \PstFlattenedSphere(2,.5)
+  \end{pspicture}
+\end{LTXexample}
+
+
+\section{TODO}
+\label{sec:todo}
+
+\begin{itemize}
+\item Interne Berechnungen und Einheitenumwandlungen verbessern.
+\item Oberflächenrauigkeit implementieren.
+\item Flüssigkeitskontaktwinkeloption implementieren.
+\end{itemize}
+
+
+\section{Danksagung}
+\label{sec:acknowledgements}
+
+Ich danke Herbert Voß und Alan Ristow für ihre Hilfe mir die Grundzüge von
+PSTricks Makros und das Rechnen mit PostScript und \TeX\ nähergebracht zu
+haben.
+
+\end{document}
+
+%%% Local Variables: 
+%%% TeX-command-default: "Make"
+%%% mode: latex
+%%% TeX-master: t
+%%% End: 
diff --git a/Master/texmf-dist/source/generic/pst-pad/Makefile b/Master/texmf-dist/source/generic/pst-pad/Makefile
index 6d48721019b..920a1cc0a4b 100644
--- a/Master/texmf-dist/source/generic/pst-pad/Makefile
+++ b/Master/texmf-dist/source/generic/pst-pad/Makefile
@@ -1,4 +1,9 @@
 MAIN = pst-pad-doc
+MAINDE = pst-pad-docDE
+
+all: \
+	$(MAIN).pdf \
+	$(MAINDE).pdf
 
 $(MAIN).pdf: \
 	showexpl.cfg \
@@ -10,29 +15,26 @@ $(MAIN).pdf: \
 		dvips $(MAIN)
 		ps2pdf $(MAIN).ps
 
+$(MAINDE).pdf: \
+	showexpl.cfg \
+	pst-pad-docDE.tex \
+	pst-pad.tex \
+	pst-pad.sty 
+		latex $(MAINDE).tex
+		latex $(MAINDE).tex
+		dvips $(MAINDE)
+		ps2pdf $(MAINDE).ps
+
+.PHONY: publish
+publish: \
+		all
+		zip pst-pad.zip \
+		pst-pad.tex pst-pad.sty showexpl.cfg Makefile README CHANGES \
+		$(MAIN).tex $(MAIN).pdf \
+		$(MAINDE).tex $(MAINDE).pdf
+
 .PHONY: clean
 clean:
-		/usr/bin/find . -iname '*~' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).aux' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).backup' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).bbl' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).blg' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).brf' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).cb' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).changes' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).dvi' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).idx' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).ilg' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).ind' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).inx' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).lof' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).log' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).lot' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).lox' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).out' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).ps' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).pdf' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).rel' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).tmp' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).toc' -exec rm {} \;
-		/usr/bin/find . -iname '$(MAIN).xcp' -exec rm {} \;
+		rm *~ *.aux *.backup *.bbl *.blg *.brf *.cb *.changes \
+		*.dvi *.idx *.ilg *.ind *.inx *.lof *.log *.lot *.lox \
+		*.out *.ps *.pdf *.rel *.tmp *.toc *.xcp *.zip