lettrine (26jul18)

git-svn-id: svn://tug.org/texlive/trunk@48278 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 128 insertions, 104 deletions

diff --git a/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg b/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg
index 4860d4df3f3..c84e0004a8b 100644
--- a/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg
+++ b/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg
@@ -1,11 +1,11 @@
 %% lettrine.cfg: configuration file for lettrine.sty
 %%
 %% If you want to customize lettrine, please *do not* hack into the
-%% code, copy this file to the directory where lettrine.sty lies
-%% and customize it as you like.
+%% code, copy this file to your working directory and customize the
+%% copy as you like.
 %%
-%% Uncomment these lines and change the parameters' values to fit
-%% your needs (see lettrine.dtx).
+%% Uncomment any of these lines and change the parameters' values
+%% to fit your needs (see lettrine.dtx).
 %%
 %%\setcounter{DefaultLines}{2}
 %%\setcounter{DefaultDepth}{0}
@@ -26,13 +26,17 @@
 %%\LettrineOnGridfalse
 %%\LettrineRealHeightfalse
 %%
-%% Theses are *commands* (value=string, only its height matters):
-%%\renewcommand*{\LettrineTestString}{ABCDEFGHIJKLMNOQPRSTUVWXYZ}
+%% Theses are *commands* (value=string, only height matters):
+%%\renewcommand*{\LettrineTestString}{EFTZ}
 %%\renewcommand*{\LettrineSecondString}{x}
+%% For backward compatibility with versions 1.63 to 1.9:
+%%\renewcommand*{\LettrineTestString}{ABCDEFGHIJKLMNOQPRSTUVWXYZ}
+%% For backward compatibility with versions up to 1.62:
+%%\renewcommand*{\LettrineTestString}{X}
 %%
 %% In case you want to set parameters for some letters
 %% in file `optfile.cfl'
-%%\renewcommand{\DefaultOptionsFile}{optfile.cfl}
+%% \renewcommand{\DefaultOptionsFile}{optfile.cfl}
 \endinput
 %%
 %% End of file `lettrine.cfg'.
diff --git a/Master/texmf-dist/tex/latex/lettrine/lettrine.sty b/Master/texmf-dist/tex/latex/lettrine/lettrine.sty
index 281acaf0755..567b7fcaf16 100644
--- a/Master/texmf-dist/tex/latex/lettrine/lettrine.sty
+++ b/Master/texmf-dist/tex/latex/lettrine/lettrine.sty
@@ -22,7 +22,7 @@
 %% in the same archive or directory.)
 \NeedsTeXFormat{LaTeX2e}[1999/12/01]
 \ProvidesFile{lettrine.sty}
-             [2015/08/31 v1.9 (Daniel Flipo)]
+             [2018/07/21 v2.0 (Daniel Flipo)]
 \NeedsTeXFormat{LaTeX2e}[1999/12/01]
 \RequirePackage{keyval}
 \newcounter{DefaultLines}
@@ -56,6 +56,12 @@
 \newdimen\L@slope
 \newdimen\L@height
 \newdimen\L@novskip
+\newdimen\L@target@ht
+\newdimen\L@target@dp
+\newdimen\L@target@tht
+\newdimen\LettrineWidth
+\newdimen\LettrineHeight
+\newdimen\LettrineDepth
 \newcommand*{\L@file}{}
 \newcommand*{\L@hang}{}
 \newcommand*{\L@oversize}{}
@@ -66,19 +72,25 @@
 \newif\ifL@realh
 \newcommand*{\LettrineTextFont}{\scshape}
 \def\Lettrine@height{%
-   \@tempdima=\baselineskip
-   \setlength{\L@height}{\value{L@lines}\@tempdima}%
-   \ifnum\value{L@lines}>1
-     \addtolength{\L@height}{-\@tempdima}%
-   \fi
    \ifvoid\L@tbox
      \sbox{\L@tbox}{\LettrineTextFont{\LettrineSecondString}}%
    \fi
-   \addtolength{\L@height}{\ht\L@tbox}%
-   \addtolength{\L@height}{\L@oversize\L@height}%
+   \global\setlength{\L@target@ht}{\ht\L@tbox}%
+   \@tempdima=\baselineskip
+   \global\setlength{\L@target@dp}{\value{L@lines}\@tempdima}%
+   \ifnum\value{L@lines}>1
+     \global\addtolength{\L@target@dp}{-\@tempdima}%
+   \else
+     \global\addtolength{\L@target@ht}{\L@target@dp}%
+     \global\setlength{\L@target@dp}{0pt}%
+   \fi
+   \global\setlength{\L@target@tht}{\L@target@ht}%
+   \global\addtolength{\L@target@tht}{\L@target@dp}%
+   \setlength{\L@height}{\L@target@tht}%
+   \addtolength{\L@height}{\L@oversize\L@target@tht}%
 }
 \newcommand*{\LettrineFontHook}{}
-\newcommand*{\LettrineTestString}{ABCDEFGHIJKLMNOQPRSTUVWXYZ}
+\newcommand*{\LettrineTestString}{EFTZ}
 \newcommand*{\LettrineSecondString}{x}
 \newcommand*{\LettrineFont}{%
    \Lettrine@height
@@ -86,8 +98,8 @@
                      \selectfont \LettrineTestString}%
    \@tempcntb=\ht\@tempboxa
    \@tempcnta=\L@height
-   \multiply\@tempcnta by 100
-   \divide\@tempcntb by 100
+   \multiply\@tempcnta by 50
+   \divide\@tempcntb by 200
    \divide\@tempcnta by \@tempcntb
    \advance\@tempcnta by -9999
    \ifnum\@tempcnta>0
@@ -117,9 +129,6 @@
 \define@key{L}{realheight}[true]{\csname L@realh#1\endcsname}
 \define@key{L}{novskip}{\setlength{\L@novskip}{#1}}
 \newcommand*{\LettrineOptionsFor}[2]{\@namedef{l@#1-keys}{#2}}
-\newdimen\LettrineWidth
-\newdimen\LettrineHeight
-\newdimen\LettrineDepth
 \def\lettrine{\@ifnextchar[\@lettrine{\@lettrine[]}}
 \def\@lettrine[#1]#2#3{%
   \setcounter{L@lines}{\value{DefaultLines}}%
@@ -180,22 +189,28 @@
   \else
      \sbox{\L@lbox}{\LettrineFont #2}%
   \fi
+  \setlength{\LettrineWidth}{\wd\L@lbox}%
+  \setlength{\LettrineHeight}{\ht\L@lbox}%
+  \setlength{\LettrineDepth}{\dp\L@lbox}%
+  \begingroup
+  \def\IeC##1{##1}%
+  \@tempdima=\L@oversize pt\relax
+  \PackageInfo{lettrine.sty}%
+    {Targeted height = \the\L@target@tht\MessageBreak
+     (no accent, loversize=0),\MessageBreak
+     Lettrine height = \the\LettrineHeight\space (#2)%
+     \ifdim\@tempdima=\z@\else\space loversize=\L@oversize\fi;%
+     \MessageBreak reported}%
+  \endgroup
   \sbox{\L@tbox}{\LettrineTextFont{#3}}%
-  \@tempdima=\baselineskip
+  \setlength{\L@first}{\LettrineHeight}%
+  \setlength{\L@lraise}{\L@raise\L@target@tht}%
+  \addtolength{\L@first}{\L@lraise}%
   \ifnum\value{L@lines}=1
-    \setlength{\L@first}{\ht\L@lbox}%
     \addtolength{\L@first}{-\ht\L@tbox}%
-    \setlength{\L@lraise}{\z@}%
   \else
-    \setlength{\L@first}{-\value{L@lines}\@tempdima}%
-    \addtolength{\L@first}{\@tempdima}%
-    \sbox{\@tempboxa}{\LettrineTextFont x}%
-    \addtolength{\L@first}{-\ht\@tempboxa}%
-    \setlength{\L@lraise}{-\L@raise\L@first}%
-    \addtolength{\L@first}{\L@lraise}%
-    \addtolength{\L@first}{\ht\L@lbox}%
-    \addtolength{\L@lraise}{-\value{L@lines}\@tempdima}%
-    \addtolength{\L@lraise}{\@tempdima}%
+    \addtolength{\L@first}{-\L@target@tht}%
+    \addtolength{\L@lraise}{-\L@target@dp}%
   \fi
   \par
   \ifdim\L@first>\L@novskip
@@ -208,10 +223,9 @@
          \advance\@tempcnta by 1
          \advance\L@first by -\@tempdima
       \repeat
-      \vskip\@tempcnta\baselineskip
-    \else
-      \vskip\L@first
+      \L@first=\@tempcnta\baselineskip
     \fi
+    \vskip\L@first
   \fi
   \setlength{\L@Pindent}{\wd\L@lbox}%
   \addtolength{\L@Pindent}{-\L@hang\wd\L@lbox}%
@@ -225,9 +239,6 @@
   \addtolength{\L@next}{-\L@Nindent}%
   \addtolength{\L@Pindent}{\rightmargin}%
   \addtolength{\L@Nindent}{\rightmargin}%
-  \setlength{\LettrineWidth}{\wd\L@lbox}%
-  \setlength{\LettrineHeight}{\ht\L@lbox}%
-  \setlength{\LettrineDepth}{\dp\L@lbox}%
   \addtocounter{L@lines}{1}%
   \addtocounter{L@lines}{\value{L@depth}}%
   \def\L@parshape{\c@L@lines \the\L@Pindent \the\L@first}%
diff --git a/Master/texmf-dist/tex/latex/lettrine/optfile.cfl b/Master/texmf-dist/tex/latex/lettrine/optfile.cfl
index b41acdb4f38..3803ea3f110 100644
--- a/Master/texmf-dist/tex/latex/lettrine/optfile.cfl
+++ b/Master/texmf-dist/tex/latex/lettrine/optfile.cfl
@@ -1,29 +1,31 @@
-%%% This is an example of config file *for syntax only*.
-%%% Copy it to your document's directory and add
-%%% \renewcommand{\DefaultOptionsFile}{optfile.cfl}
-%%% to your document's preamble to use it.
-%%%
-%%% The settings below are just *examples*, they are not meant to be good!
-%%% Proper values heavily depend on the font used!
-%%%
-%%% Letters not listed below, will get either the default parameters,
-%%% or those given as optional argument of \lettrine, if any.
-%%%
-%%% The values of the parameters set in this file can be overridden locally
-%%% using the optional argument of \lettrine.
-
-% A
+%% This is an example of config file *for syntax only*.
+%%
+%% Copy it to your document's directory and add
+%% \renewcommand{\DefaultOptionsFile}{optfile.cfl}
+%% to your document's preamble to use it.
+%%
+%% The settings below are just *examples*, they are not meant to be good!
+%% Proper values heavily depend on the font used!
+%%
+%% Letters not listed below, will get either the default parameters,
+%% or those given as optional argument of \lettrine, if any.
+%%
+%% The values of the parameters set in this file can be overridden locally
+%% using the optional argument of \lettrine.
+%%
+%% A
 \LettrineOptionsFor{A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=.7em}
-% Same parameters for \`A
+%% Same parameters for \`A
 \LettrineOptionsFor{\`A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=0.7em}
-% C'
+%% C'
 \LettrineOptionsFor{C'}{nindent=-0.5em}
-% I and J hang into the margin
+%% I and J hang into the margin
 \LettrineOptionsFor{I}{lhang=1, nindent=0pt}
 \LettrineOptionsFor{J}{lhang=1, nindent=0pt}
-% Q
-\LettrineOptionsFor{Q}{loversize=0, lraise=0.1}
-% V
+%% Q
+\LettrineOptionsFor{Q}{loversize=-0.1, lraise=0.1}
+%% V
 \LettrineOptionsFor{V}{slope=-0.1\LettrineWidth, lhang=0.5, nindent=0pt}
-
 \endinput
+%%
+%% End of file `optfile.cfl'.
diff --git a/Master/texmf-dist/tex/latex/lettrine/pacl.cfl b/Master/texmf-dist/tex/latex/lettrine/pacl.cfl
index a7c122313fa..f5003b0f4e6 100644
--- a/Master/texmf-dist/tex/latex/lettrine/pacl.cfl
+++ b/Master/texmf-dist/tex/latex/lettrine/pacl.cfl
@@ -1,29 +1,29 @@
 %%% This is file `pacl.cfl'.
 %%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
 %%% If you modify this file you *MUST* change its name.
-%%%
+
 %%% This file contains config values to simplify the use of the
 %%% ACaslon-SwashItalic (aka pacri8s) font from Adobe
 %%% with the lettrine package by Daniel Flipo.
-%%%
+
 %%% If you want to use this file, your document should contain
 %%% the two next lines, without the leading percent signs.
 %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pacl}\selectfont}
 %%% \renewcommand{\DefaultOptionsFile}{pacl.cfl}
-%%%
+
 %%% The fontfamily pacl is defined through the file T1pacl.fd.
 %%% The contents of T1pacl.fd is listed at the end of this file.
-%%%
+
 %%% The settings below were defined according to my visual tastes.
 %%% No mathematical rule based on the metrices was applied.
 %%% Though the result may not please you, it should be better
 %%% than the default placement. This said, comments are welcome.
-%%%
+
 %%% Comments about this file can be sent to Pascal.Kockaert
 %%% at the mail server ulb.ac.be.
 
-
 \ProvidesFile{pacl.cfl}[2003/08/24 v0.1 Pascal Kockaert]
+
 \LettrineOptionsFor{A}{loversize= 0.15,lraise= 0.02,lhang= 0.30,findent= 0.00\LettrineWidth,nindent= 0.50em}
 \LettrineOptionsFor{B}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent=-0.05\LettrineWidth,nindent= 0.50em}
 \LettrineOptionsFor{C}{loversize=-0.10,lraise= 0.25,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em}
@@ -50,16 +50,18 @@
 \LettrineOptionsFor{X}{loversize= 0.15,lraise= 0.00,lhang= 0.45,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
 \LettrineOptionsFor{Y}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.20\LettrineWidth,nindent= 0.25\LettrineWidth}
 \LettrineOptionsFor{Z}{loversize= 0.05,lraise= 0.15,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
-\endinput
+\let\EOF\endinput
+\EOF
 
+%% The installation of the pacl family can be performed using the
+%% fontinst package.
+%% You must own the font ACaslon-SwashItalic, that is an AFM and a PFB file
+%% which should be renamed as padri8w.afm and padri8w.pfb.
 
-% The installation of the pacl family can be performed using the fontinst package.
-% You must own the font ACaslon-SwashItalic, that is an AFM and a PFB file
-% which should be renamed as padri8w.afm and padri8w.pfb.
-%
-% You should process the file Makepacl.tex (see below) through TeX,
-% and follow the instructions of the fontinst manual to finish the install.
-% The file T1pacl.fd should be defined as below and put with other local FD files.
+%% You should process the file Makepacl.tex (see below) through TeX,
+%% and follow the instructions of the fontinst manual to finish the install.
+%% The file T1pacl.fd should be defined as below and put with other local
+%% FD files.
 
 %%% File Makepacl.tex
 \input fontinst.sty
@@ -71,12 +73,11 @@
 \bye
 %%% End of file Makepacl.tex
 
-% The pacl family is defined by the file T1pacl.fd, as follows
+%%% The pacl family is defined by the file T1pacl.fd, as follows
 
 %%% File T1pacl.fd
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
+%%% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
 \ProvidesFile{t1pacl.fd}[2003/08/24 v1.0 Pascal Kockaert]
 \DeclareFontFamily{T1}{pacl}{}
 \DeclareFontShape{T1}{pacl}{m}{n}{<->pacri9s}{}
-\endinput
 %%% End of file T1pacl.fd
diff --git a/Master/texmf-dist/tex/latex/lettrine/padl.cfl b/Master/texmf-dist/tex/latex/lettrine/padl.cfl
index 784bebc935e..79e90b96aec 100644
--- a/Master/texmf-dist/tex/latex/lettrine/padl.cfl
+++ b/Master/texmf-dist/tex/latex/lettrine/padl.cfl
@@ -1,29 +1,27 @@
 %%% This is file `padl.cfl'.
 %%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
 %%% If you modify this file you *MUST* change its name.
-%%%
+
 %%% This file contains config values to simplify the use of the
 %%% AGaramondAlt-Italic (aka padri8w) font from Adobe
 %%% with the lettrine package by Daniel Flipo.
-%%%
+
 %%% If you want to use this file, your document should contain
 %%% the two next lines, without the leading percent signs.
 %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{padl}\selectfont}
 %%% \renewcommand{\DefaultOptionsFile}{padl.cfl}
-%%%
+
 %%% The fontfamily padl is defined through the file T1padl.fd.
 %%% The contents of T1padl.fd is listed at the end of this file.
-%%%
+
 %%% The settings below were defined according to my visual tastes.
 %%% No mathematical rule based on the metrices was applied.
 %%% Though the result may not please you, it should be better
 %%% than the default placement. This said, comments are welcome.
-%%%
+
 %%% Comments about this file can be sent to Pascal.Kockaert
 %%% at the mail server ulb.ac.be.
 
-
-
 \ProvidesFile{padl.cfl}[2003/08/24 v1.0 Pascal Kockaert]
 
 \LettrineOptionsFor{A}{loversize= 0.05,lraise= 0.10,lhang= 0.40,findent= 0.000\LettrineWidth,nindent= 0.50em}
@@ -52,16 +50,19 @@
 \LettrineOptionsFor{X}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.20\LettrineWidth}
 \LettrineOptionsFor{Y}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.100\LettrineWidth,nindent= 0.20\LettrineWidth}
 \LettrineOptionsFor{Z}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.55\LettrineWidth}
-\endinput
+\let\EOF\endinput
+\EOF
 
+%% The installation of the padl family can be performed using the
+%% fontinst package.
+%% You must own the font AGaramondAlt-Italic, that is an AFM and a PFB
+%% file which should be renamed as padri8w.afm and padri8w.pfb.
 
-% The installation of the padl family can be performed using the fontinst package.
-% You must own the font AGaramondAlt-Italic, that is an AFM and a PFB file
-% which should be renamed as padri8w.afm and padri8w.pfb.
-%
-% You should process the file Makepadl.tex (see below) through TeX,
-% and follow the instructions of the fontinst manual to finish the install.
-% The file T1padl.fd should be defined as below and put with other local FD files.
+%% You should process the file Makepadl.tex (see below) through TeX,
+%% and follow the instructions of the fontinst manual to finish the
+%% install.
+%% The file T1padl.fd should be defined as below and put with other
+%% local FD files.
 
 %%% File Makepadl.tex
 \input fontinst.sty
@@ -74,12 +75,11 @@
 \bye
 %%% End of file Makepadl.tex
 
-% The padl family is defined by the file T1padl.fd, as follows
+%% The padl family is defined by the file T1padl.fd, as follows
 
 %%% File T1padl.fd
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
+%%% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
 \ProvidesFile{t1padl.fd}[2003/08/24 v0.1 Pascal Kockaert]
 \DeclareFontFamily{T1}{padl}{}
 \DeclareFontShape{T1}{padl}{m}{n}{<->padw9w}{}
-\endinput
 %%% End of file T1padl.fd
diff --git a/Master/texmf-dist/tex/latex/lettrine/pzc2.cfl b/Master/texmf-dist/tex/latex/lettrine/pzc2.cfl
index 77799687805..334f8805c1c 100644
--- a/Master/texmf-dist/tex/latex/lettrine/pzc2.cfl
+++ b/Master/texmf-dist/tex/latex/lettrine/pzc2.cfl
@@ -1,21 +1,22 @@
 %%% This is file `pzc2.cfl'.
 %%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn.
 %%% If you modify this file you *MUST* change its name.
-%%%
+
 %%% This file contains config values to simplify the use of the
 %%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo.
 %%% This file provides the parameters for 2 DefaultLines.
-%%%
+
 %%% If you want to use this file, your document should contain
 %%% the next three lines, without the leading percent signs.
 %%% \setcounter{DefaultLines}{2}
 %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont}
 %%% \renewcommand{\DefaultOptionsFile}{pzc2.cfl}
-%%%
+
 %%% Comments about this file can be sent to Kevin Dunn
 %%% (cavema2 at cavemanchemistry.com)
-%%%
+
 \ProvidesFile{pzc2.cfl}[2006/03/19 v0.1 Kevin M. Dunn]
+
 \LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
 \LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.08\LettrineWidth}
 \LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
@@ -43,3 +44,5 @@
 \LettrineOptionsFor{Y}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.05\LettrineWidth}
 \LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
 \endinput
+%%
+%% End of file `pzc2.cfl'.
diff --git a/Master/texmf-dist/tex/latex/lettrine/pzc3.cfl b/Master/texmf-dist/tex/latex/lettrine/pzc3.cfl
index a67ba9b5b0e..125c07ac4e7 100644
--- a/Master/texmf-dist/tex/latex/lettrine/pzc3.cfl
+++ b/Master/texmf-dist/tex/latex/lettrine/pzc3.cfl
@@ -1,21 +1,22 @@
-%%% This is file `pzc2.cfl'.
+%%% This is file `pzc3.cfl'.
 %%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn.
 %%% If you modify this file you *MUST* change its name.
-%%%
+
 %%% This file contains config values to simplify the use of the
 %%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo.
 %%% This file provides the parameters for 3 DefaultLines.
-%%%
+
 %%% If you want to use this file, your document should contain
 %%% the next three lines, without the leading percent signs.
 %%% \setcounter{DefaultLines}{3}
 %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont}
 %%% \renewcommand{\DefaultOptionsFile}{pzc3.cfl}
-%%%
+
 %%% Comments about this file can be sent to Kevin Dunn
 %%% (cavema2 at cavemanchemistry.com)
 
 \ProvidesFile{pzc3.cfl}[2006/03/19 v0.1 Kevin M. Dunn]
+
 \LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
 \LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.08\LettrineWidth,slope=-0.08\LettrineWidth}
 \LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
@@ -43,3 +44,5 @@
 \LettrineOptionsFor{Y}{loversize= 0.30,lraise= 0.10,lhang= 0.40,findent=0.10\LettrineWidth,nindent= 0.00\LettrineWidth,slope=-0.10\LettrineWidth}
 \LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
 \endinput
+%%
+%% End of file `pzc3.cfl'.