sync,doc

git-svn-id: svn://tug.org/texlive/trunk@44706 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 66 insertions, 57 deletions

diff --git a/Master/texmf-dist/tex/texinfo/texinfo.tex b/Master/texmf-dist/tex/texinfo/texinfo.tex
index c8913ab918e..b40a6e2a2be 100644
--- a/Master/texmf-dist/tex/texinfo/texinfo.tex
+++ b/Master/texmf-dist/tex/texinfo/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2016-09-18.18}
+\def\texinfoversion{2017-06-04.19}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
 % Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software: you can redistribute it and/or
@@ -165,6 +165,9 @@
 % Give the space character the catcode for a space.
 \def\spaceisspace{\catcode`\ =10\relax}
 
+% Likewise for ^^M, the end of line character.
+\def\endlineisspace{\catcode13=10\relax}
+
 \chardef\dashChar  = `\-
 \chardef\slashChar = `\/
 \chardef\underChar = `\_
@@ -950,21 +953,14 @@ where each line of input produces a line of output.}
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-%
-\def\comment{\begingroup \catcode`\^^M=\active%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}%
 
-{\catcode`\^^M=\active%
-\gdef\commentxxx#1^^M{\endgroup%
-\futurelet\nexttoken\commentxxxx}%
-\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}%
-}
 
 \def\c{\begingroup \catcode`\^^M=\active%
 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
 \cxxx}
 {\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
-% See comment in \scanmacro about why the definitions of @c and @comment differ
+%
+\let\comment\c
 
 % @paragraphindent NCHARS
 % We'll use ems for NCHARS, close enough.
@@ -5497,17 +5493,15 @@ end
       \let\indexlbrace\{   % Likewise, set these sequences for braces
       \let\indexrbrace\}   % used in the sort key.
       \begindoublecolumns
-      \let\entrywidowpenalty=\indexwidowpenalty
+      \let\dotheinsertentrybox\dotheinsertentryboxwithpenalty
       %
       % Read input from the index file line by line.
       \loopdo
-        \ifeof1
-          \let\firsttoken\relax
-        \else
+        \ifeof1 \else
           \read 1 to \nextline
-          \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
-          \act
         \fi
+        %
+        \indexinputprocessing
         \thisline
         %
         \ifeof1\else
@@ -5519,12 +5513,20 @@ end
   \fi
   \closein 1
 \endgroup}
+\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
+\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
 
+\def\indexinputprocessing{%
+  \ifeof1
+    \let\firsttoken\relax
+  \else
+    \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
+    \act
+  \fi
+}
 \def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken}
 \long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1}
 
-\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
-\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
 
 % These macros are used by the sorted index file itself.
 % Change them to control the appearance of the index.
@@ -5601,7 +5603,7 @@ end
     % For pdfTeX and XeTeX.
     % The redefinition of \domark stops marks being added in \pdflink to 
     % preserve coloured links across page boundaries.  Otherwise the marks
-    % would get in the way of \lastbox in \insertindexentrybox.
+    % would get in the way of \lastbox in \insertentrybox.
     \let\domark\relax
     %
     % Start a new paragraph if necessary, so our assignments below can't
@@ -5662,9 +5664,9 @@ end
     \fi
     \egroup % end \boxA
     \ifdim\wd\boxB = 0pt
-      \global\setbox\entryindexbox=\vbox{\unhbox\boxA}%
+      \global\setbox\entrybox=\vbox{\unhbox\boxA}%
     \else
-    \global\setbox\entryindexbox=\vbox\bgroup
+    \global\setbox\entrybox=\vbox\bgroup
       % We want the text of the entries to be aligned to the left, and the
       % page numbers to be aligned to the right.
       %
@@ -5726,19 +5728,20 @@ end
     \egroup % The \vbox
     \fi
   \endgroup
-  % delay text of entry until after penalty
-  \bgroup\aftergroup\insertindexentrybox
-  \entrywidowpenalty
+  \dotheinsertentrybox
 }}
 
 \newskip\thinshrinkable
 \skip\thinshrinkable=.15em minus .15em
 
-\newbox\entryindexbox
-\def\insertindexentrybox{%
-  \ourunvbox\entryindexbox
+\newbox\entrybox
+\def\insertentrybox{%
+  \ourunvbox\entrybox
 }
 
+% default definition
+\let\dotheinsertentrybox\insertentrybox
+
 % Use \lastbox to take apart vbox box by box, and add each sub-box
 % to the current vertical list.
 \def\ourunvbox#1{%
@@ -5761,21 +5764,18 @@ end
 \newbox\delayedbox
 \newbox\interbox
 
-% Default is no penalty
-\let\entrywidowpenalty\egroup
-
 % Used from \printindex.  \firsttoken should be the first token
 % after the \entry.  If it's not another \entry, we are at the last
 % line of a group of index entries, so insert a penalty to discourage
 % widowed index entries.
-\long\def\indexwidowpenalty{%
-  \def\isentry{\entry}%
+\def\dotheinsertentryboxwithpenalty{%
   \ifx\firsttoken\isentry
   \else
     \penalty 9000
   \fi
-  \egroup % now comes the box added with \aftergroup
+  \insertentrybox
 }
+\def\isentry{\entry}%
 
 % Like plain.tex's \dotfill, except uses up at least 1 em.
 % The filll stretch here overpowers both the fil and fill stretch to push
@@ -5892,8 +5892,8 @@ end
     \divide\doublecolumnhsize by 2
   \hsize = \doublecolumnhsize
   %
-  % Double the \vsize as well.  (We don't need a separate register here,
-  % since nobody clobbers \vsize.)
+  % Double the \vsize as well.
+  \advance\vsize by -\ht\partialpage
   \vsize = 2\vsize
   %
   % For the benefit of balancing columns
@@ -5911,12 +5911,12 @@ end
   % previous page.
   \dimen@ = \vsize
   \divide\dimen@ by 2
-  \advance\dimen@ by -\ht\partialpage
   %
   % box0 will be the left-hand column, box2 the right.
-  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \setbox0=\vsplit\PAGE to\dimen@ \setbox2=\vsplit\PAGE to\dimen@
+  \global\advance\vsize by 2\ht\partialpage
   \onepageout\pagesofar
-  \unvbox255
+  \unvbox\PAGE
   \penalty\outputpenalty
 }
 %
@@ -5980,9 +5980,9 @@ end
   %
   % \pagegoal was set to the doubled \vsize above, since we restarted
   % the current page.  We're now back to normal single-column
-  % typesetting, so reset \pagegoal to the normal \vsize (after the
-  % \endgroup where \vsize got restored).
-  \pagegoal = \vsize
+  % typesetting, so reset \pagegoal to the normal \vsize.
+  \global\vsize = \txipageheight %
+  \pagegoal = \txipageheight %
 }
 \newbox\balancedcolumns
 \setbox\balancedcolumns=\vbox{shouldnt see this}%
@@ -5990,7 +5990,7 @@ end
 % Only called for the last of the double column material.  \doublecolumnout 
 % does the others.
 \def\balancecolumns{%
-  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
   \dimen@ = \ht0
   \advance\dimen@ by \topskip
   \advance\dimen@ by-\baselineskip
@@ -8031,9 +8031,6 @@ end
   }
 \fi
 
-\let\aftermacroxxx\relax
-\def\aftermacro{\aftermacroxxx}
-
 % alias because \c means cedilla in @tex or @math
 \let\texinfoc=\c
 
@@ -8055,18 +8052,13 @@ end
   \catcode`\\=\active
   %
   % Process the macro body under the current catcode regime.
-  \scantokens{#1@texinfoc}\aftermacro%
+  \scantokens{#1@texinfoc}%
   %
   \catcode`\@=\savedcatcodeone
   \catcode`\\=\savedcatcodetwo
   %
   % The \texinfoc is to remove the \newlinechar added by \scantokens, and
   % can be noticed by \parsearg.
-  %   The \aftermacro allows a \comment at the end of the macro definition
-  % to duplicate itself past the final \newlinechar added by \scantokens:
-  % this is used in the definition of \group to comment out a newline.  We
-  % don't do the same for \c to support Texinfo files with macros that ended
-  % with a @c, which should no longer be necessary.
   %   We avoid surrounding the call to \scantokens with \bgroup and \egroup
   % to allow macros to open or close groups themselves.
 }
@@ -8538,6 +8530,13 @@ end
   \ifcase\paramno
   % 0
     \expandafter\xdef\csname\the\macname\endcsname{%
+      \bgroup
+        \noexpand\spaceisspace
+        \noexpand\endlineisspace
+        \noexpand\expandafter % skip any whitespace after the macro name.
+        \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+    \expandafter\xdef\csname\the\macname @@@\endcsname{%
+      \egroup
       \noexpand\scanmacro{\macrobody}}%
   \or % 1
     \expandafter\xdef\csname\the\macname\endcsname{%
@@ -9123,7 +9122,13 @@ end
     \xdef\safexrefname{#1}%
   }%
   %
-  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  \bgroup
+    \expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
+  \egroup
+  % We put the \gdef inside a group to avoid the definitions building up on 
+  % TeX's save stack, which can cause it to run out of space for aux files with 
+  % thousands of lines.  \gdef doesn't use the save stack, but \csname does
+  % when it defines an unknown control sequence as \relax. 
   %
   % Was that xref control sequence that we just defined for a float?
   \expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -11279,6 +11284,7 @@ directory should work if nowhere else does.}
     \pdfvorigin = 1 true in
   \else
     \ifx\XeTeXrevision\thisisundefined
+      \special{papersize=#8,#7}%
     \else
       \pdfpageheight #7\relax
       \pdfpagewidth #8\relax
@@ -11316,7 +11322,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.3in
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = .5cm
 }}
@@ -11334,7 +11339,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.25in
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = .4cm
 }}
@@ -11360,7 +11364,6 @@ directory should work if nowhere else does.}
                     {297mm}{210mm}%
   %
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = 5mm
 }}
@@ -11379,7 +11382,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.2in
   \tolerance = 800
-  \hfuzz = 1.2pt
   \contentsrightmargin = 0pt
   \defbodyindent = 2mm
   \tableindent = 12mm
@@ -11435,6 +11437,9 @@ directory should work if nowhere else does.}
 %
 \letterpaper
 
+% Default value of \hfuzz, for suppressing warnings about overfull hboxes.
+\hfuzz = 1pt
+
 
 \message{and turning on texinfo input format.}
 
@@ -11600,6 +11605,9 @@ directory should work if nowhere else does.}
   @def ^^M{@let^^M@secondlinenl}%
   % Definition for a newline in the main Texinfo file.
   @gdef @secondlinenl{@fixbackslash}%
+  % In case the first line has a whole-line command on it
+  @let@originalparsearg@parsearg
+  @def@parsearg{@fixbackslash@originalparsearg}
 }}
 
 {@catcode`@^=7 @catcode`@^^M=13%
@@ -11620,6 +11628,7 @@ directory should work if nowhere else does.}
   @catcode13=5 % regular end of line
   @enableemergencynewline
   @let@c=@texinfoc
+  @let@parsearg@originalparsearg
   % Also turn back on active characters that might appear in the input
   % file name, in case not using a pre-dumped format.
   @catcode`+=@active