muthesis

git-svn-id: svn://tug.org/texlive/trunk@1121 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 455 insertions, 0 deletions

diff --git a/Master/texmf-dist/tex/latex/muthesis/muthesis.cls b/Master/texmf-dist/tex/latex/muthesis/muthesis.cls
new file mode 100644
index 00000000000..b1d37dd1866
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/muthesis/muthesis.cls
@@ -0,0 +1,455 @@
+%% muthesis Class for LaTeX2e.
+
+%%
+%% Time-stamp: <2005-02-01 10:26:32 graham>
+%%
+
+%%
+%% Copyright 1999-2005 G.D. Gough and the University of Manchester
+%%
+%% This program can redistributed and/or modified under the terms
+%% of the LaTeX Project Public License Distributed from CTAN
+%% archives in directory macros/latex/base/lppl.txt; either
+%% version 1 of the License, or (at your option) any later version.
+
+%% This class file has been cobbled together for use of postgraduate
+%% students in the School of Computer Science at the University of
+%% Manchester. I believe it had its origins in the Stanford thesis
+%% style but has since been modified almost beyond recognition to cope
+%% with life in Manchester.
+
+%% A fairly detailed description of the use of this class can be found
+%% below (see `Example of use')
+
+%% Any comments or problems about its use should be made
+%% via the local newsgroup man.cs.tex.
+%%
+%% The \school command can be used to define a school other than
+%% Computer Science, 
+%% e.g \school{Applied Basket Weaving}
+%% but no support is provided for users outside the School of C.Sc. 
+%%
+%% Note that this makes no attempt to deal with multi-volume thesis -
+%% if you do one that long you deserve everything you get.
+%% 1) Page numbering starts on the title page and is arabic (i.e. title
+%%       page is no.1), all pages are numbered (declaration, figures
+%%       etc included), but the title page itself shall not show the
+%%       page number!
+%%
+%%
+%% 2) The preface will consist of the following sections in the
+%%       following order!
+%%       i  )    Title Page
+%%       ii )    Contents page (actually we shall be fancy and have a
+%%               table of contents, list of tables and list of figures.
+%%               This is the correct place to put these extras)
+%%       iii)    A short Abstract
+%%       iv)     Declaration of honesty
+%%       v)      Statement of qualifications and research
+%%       vi)     Anything else you want, such as acknowledgements
+%%
+%%
+%% 3) The ordering of the items on the title page has been changed
+%%       slightly from the old muthesis style - it is now
+%%               Statement - A thesis ..... Faculty of ...
+%%               Year of Presentation
+%%               Candidate's name
+%%               Candidate's school
+%%
+%%
+%% 4)    Certain members of this university never having heard of
+%%       typesetting, (i.e. the ones who will be the first against the
+%%       wall when the revolution comes), the whole thing (apart from
+%%       footnotes and quotations must be one and a half spaced. By a
+%%       strange coincidence, a set of the thesis rules fell through a
+%%       time warp from the future and landed on my desk. These note
+%%       that single spacing is allowed in typeset thesis, with a
+%%       footnote that those who were in favour of double spacing were
+%%       the first against the wall when the revolution came. 
+%%               If everyone who submits a thesis goes and argues with
+%%       them about this they may eventually get the hint, but this is
+%%       unlikely. By all means use the singlespace class option while
+%%       producing draft copies, but remember to remove it before you
+%%       hand in. 
+%%
+%%
+%% 5) The binding (left hand) margin must be no less than 40mm, other
+%%       margins must be no less than 15mm, with page numbers falling
+%%       within these margins. The binding margin is thus rather large,
+%%       even when you take the binding (normally about 10mm) into account.
+%%       Consequently you cannot reduce the other margins without
+%%       making the page look unbalanced. Consequently we have a 40mm
+%%       binding margin and 25 mm margin on all other sides. NOTE, this
+%%       does not allow for any marginal notes. I recommend that you
+%%       avoid using these, since a) there is not much space for them
+%%       and they will format badly and b) they will violate the margin
+%%       rules.
+%%
+%%
+%% The rest of these notes will not be found in the written submission
+%% rules, but come from conversations with the exams office.
+%%
+%%
+%% 6)    They have not particular rules about the format of the
+%%       bibliography, so long as you are consistent in your naming
+%%       scheme. I would recommend the alpha style.
+%%
+%%
+%% 7)    They do not seem to have any rules about appendices.
+%%
+%%
+%% 8)    As before, any extra things you want to put in -
+%%       acknowledgements etc, should come after the mandatory preface
+%%       sections and before the first chapter.
+%%
+%%
+%% It is not compatible with the drafthead style.
+
+
+\NeedsTeXFormat{LaTeX2e} \ProvidesClass{muthesis}[1999/05/26 MU Thesis Class]
+
+\RequirePackage{setspace}
+\newif\ifsinglesp@
+\newif\ifdoublesp@
+\doublesp@false
+
+\DeclareOption{singlespace}{\singlesp@true}
+\DeclareOption{doublespace}{\doublesp@true}
+\DeclareOption{PhD}{\def\degreetitle{Doctor of Philosophy}}
+\DeclareOption{MSc}{\def\degreetitle{Master of Science}}
+\DeclareOption{MPhil}{\def\degreetitle{Master of Philosophy}}
+\DeclareOption{MRes}{\def\degreetitle{Master of Research in Informatics}}
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
+
+\ExecuteOptions{PhD}
+
+\ProcessOptions
+
+
+\LoadClass[a4paper]{report}
+
+%% Manchester University PhD thesis style -- modifications to the report style
+%%
+\long\def\comment#1{}
+\comment{
+
+  Example of use:
+    \documentclass[12pt,MSc]{muthesis}
+%%%% \documentclass[12pt,MSc,singlespace]{muthesis}
+%%%%  can be used until the final draft
+    \begin{document}
+    \title{How to Write Theses\\
+            With Two Line Titles}
+    \author{John Henry Candidate}
+    \principaladviser{John Parker}
+    \firstreader{John Green}
+    \secondreader{John BigBooty\\(Another School)}
+
+    \beforeabstract
+    \prefacesection{Abstract}
+        This thesis answers all the questions you were afraid to ask ...
+    \afterabstract
+    \prefacesection{Acknowledgements}
+        I would like to thank...
+    \afterpreface
+
+    \chapter{Introduction}
+         ...
+    \chapter{Conclusions}
+         ...
+    \appendix
+    \chapter{A Long Proof}
+         ...
+    \bibliographystyle{alpha}
+    \bibliography{mybib}
+
+
+Documentation:
+    It sets the margins and interline spacing and disallows page
+    breaks at hyphens. 
+
+    The \beforeabstract command creates the title page, a copyright
+    page (default), and a signature page (optional), the tables of
+    contents, tables and figures. The signature page is not mentioned
+    in the rules for submission, and by implication are not allowed.
+
+    The user then includes the preface using the
+    \prefacesection{Abstract} command. 
+
+    Next should come an \afterabstract command to insert the declaration.
+
+    Then the user should put preface section(s), using the
+    \prefacesection{section title} command. The first of these should
+    be the statement of education and research, others may be
+    acknowledgements etc.
+
+    The \afterpreface command then  sets things up to start
+    the main body (continuing the sequence of page numbering, but
+    putting page headings etc.).
+
+    Having one of \beforepreface or \afterpreface without the other
+    may cause problems, so udon't do it.
+
+    The following commands can control what goes in the front matter
+    material:
+
+        \title{thesis title}
+        \author{author's name}
+        \school{author's school}
+                - Computer Science if omitted
+        \principaladviser{the principal advisor's name}
+           (or \principaladvisor, if you prefer advisor spelled with o)
+        \firstreader{the first reader's name}
+        \secondreader{the second reader's name}
+        \submitdate{month year in which submitted to GPO}
+                - date LaTeX'd if omitted
+        \copyrightyear{year degree conferred (next year if submitted in Dec.)}
+                - year LaTeX'd (or next year, in December) if omitted
+        \copyrighttrue or \copyrightfalse
+                - produce or don't produce a copyright page (true by default)
+        \figurespagetrue or \figurespagefalse
+                - produce or don't produce a List of Figures page
+                  (true by default)
+        \tablespagetrue or \tablespagefalse
+                - produce or don't produce a List of Tables page
+                  (true by default)
+        \sigpagtrue or \sigpagfalse
+                - produce or don't produce a signature page
+                  (again false by default, as Manchester theses don't
+                   require this. However, it's left in so that you can
+                   your own `examiners page' if you like!)
+
+        If you set all these to false, then perhaps you don't want any
+        preface at all, so perhaps you hould leave out both \beforepreface
+        and \afterpreface -).
+        
+        This style uses interline spacing that is 1.24 times normal
+        (about one and half spaced), except in the figure and table
+        environments where normal spacing is used.
+        
+        The example above shows the 12pt substyle being used.  This
+        seems to give acceptable looking results, but it may be
+        omitted to get smaller print.
+
+}
+%% We need >15mm  margins except on the binding edge, where it is >40mm
+\oddsidemargin 14.6truemm \evensidemargin 0truemm
+\marginparwidth 40pt \marginparsep 10pt
+\topmargin 0truemm \headsep 10truemm
+\textheight 224truemm \textwidth 145truemm
+
+%% Disallow page breaks at hyphens (this will give some underfull vbox's,
+%% so an alternative is to use \brokenpenalty=100 and manually search
+%% for and fix such page breaks)
+\brokenpenalty=10000
+
+%% Set up line spacing
+\AtBeginDocument{%
+\ifdoublesp@%
+  \doublespacing%
+\else\ifsinglesp@%
+  \singlespacing%
+\else%
+  \onehalfspacing%
+\fi%
+\fi
+}
+
+%% \author, \title are defined in report; here are the rest of the
+%% front matter defining macros
+%% Note: If you really want, you can define your own macro for, say
+%% \supervisor , just by copying the definitions of \principaladvisor
+%%
+\def\dept#1{\gdef\@dept{#1}}
+\def\school#1{\gdef\@dept{#1}}
+\def\principaladviser#1{\gdef\@principaladviser{#1}}
+\def\advis@r{Advisor} % default spelling---we are English!
+%% Obviously, we could add a \supervisor macro
+\def\principaladvisor#1{\gdef\@principaladviser{#1}\gdef\advis@r{Advisor}}
+\def\firstreader#1{\gdef\@firstreader{#1}}
+\def\secondreader#1{\gdef\@secondreader{#1}}
+\def\submitdate#1{\gdef\@submitdate{#1}}
+\def\copyrightyear#1{\gdef\@copyrightyear{#1}} % \author, \title in report
+\def\@title{}\def\@author{}\def\@dept{Computer Science}
+\def\@principaladviser{}\def\@firstreader{}\def\@secondreader{}
+%\def\@submitdate{\ifcase\the\month\or
+%  January\or February\or March\or April\or May\or June\or
+%  July\or August\or September\or October\or November\or December\fi
+%  \space \number\the\year}
+% No month required, as from July 2003
+\def\@submitdate{\number\the\year}
+%% Stanford says that December theses should have the next year as the
+%% copyright year
+\ifnum\month=12
+    \@tempcnta=\year \advance\@tempcnta by 1
+    \edef\@copyrightyear{\number\the\@tempcnta}
+\else
+    \def\@copyrightyear{\number\the\year}
+\fi
+\newif\ifcopyright \newif\iffigurespage \newif\iftablespage \newif\ifsigpage
+\copyrighttrue \figurespagetrue \tablespagetrue \sigpagefalse
+
+\def\titlep{%
+        \thispagestyle{empty}%
+        \null\vskip1in%
+        \begin{center}
+                \Huge\uppercase\expandafter{\@title}
+        \end{center}
+        \vfill
+        \begin{center}
+                \sc A thesis submitted to the University of Manchester\\
+                for the degree of \degreetitle\\
+                in the Faculty of Engineering and Physical Sciences
+        \end{center}
+        \vfill
+        \begin{center}
+                \@submitdate
+        \end{center}
+        \vfill
+        \begin{center}
+                \normalfont By\\
+                \@author\\
+                School of \expandafter{\@dept}
+        \end{center}\vskip.5in\newpage}
+
+\def\copyrightpage{%
+\prefacesection{Copyright}
+
+Copyright in text of this thesis rests with the Author. Copies (by any
+process) either in full, or of extracts, may be made {\bf only} in
+accordance with instructions given by the Author and lodged in the
+John Rylands University Library of Manchester. Details may be obtained
+from the Librarian. This page must form part of any such copies made.
+Further copies (by any process) of copies made in accordance with such
+instructions may not be made without the permission (in writing) of the
+Author.
+
+The ownership of any intellectual property rights which may be described
+in this thesis is vested in the University of Manchester, subject to
+any prior agreement to the contrary, and may not be made available for
+use by third parties without the written permission of the University,
+which will prescribe the terms and conditions of any such agreement.
+
+Further information on the conditions under which disclosures and
+exploitation may take place is available from the head of School
+of \expandafter{\@dept}. % WBD
+%%        \null\vfill
+%%        \begin{center}
+%%                \Large\copyright\ Copyright \@copyrightyear\\
+%%                by\\
+%%                \@author\\
+%%        \end{center}
+        \vfill\newpage}
+
+\long\def\signature#1{%
+\begin{center}
+\begin{minipage}{4in}
+\parindent=0pt
+I certify that I have read this thesis and that in my opinion
+it is fully adequate, in scope and in quality, as a dissertation for the degree
+of \degreetitle.
+\par
+\vspace{.5in}
+\hbox to 4in{\hfil\shortstack{\vrule width 3in height 0.4pt\\#1}}
+\end{minipage}
+\end{center}}
+
+\def\signaturepage{%
+        \signature{\@principaladviser\\(Principal \advis@r)}
+        \vfill
+        \signature\@firstreader
+        \vfill
+        \signature\@secondreader
+        \vfill
+%% Again, the real format will have to be added here%
+        \begin{center}
+        \begin{minipage}{4in}
+        Approved for the University Committee on Graduate Studies:\par
+        \vspace{.5in}
+        \hbox to 4in{\hfil\shortstack{\vrule width 3in height 0.4pt\\
+                        Dean of Graduate Studies \& Research}}
+        \end{minipage}
+        \end{center}}
+
+\def\declpage{%
+\prefacesection{Declaration}
+        \begin{center}
+        \begin{minipage}{4in}
+                \parindent=0pt
+                No portion of the work referred to in this thesis has been
+                submitted in support of an application for another degree or
+                qualification of this or any other university or other
+                institution of learning.
+                \par
+        \end{minipage}%
+        \end{center}%
+        \vfill}
+
+\def\beforeabstract{
+        \pagenumbering{arabic}
+        \pagestyle{plain}
+        \titlep
+        \ifsigpage\signaturepage\fi
+        \tableofcontents
+        \newpage
+        \iftablespage
+                \addvspace{10pt}
+                \listoftables
+                \newpage
+        \fi
+        \iffigurespage
+                \addvspace{10pt}
+                \listoffigures
+                \newpage
+        \fi}
+
+\def\afterabstract{
+%% \newpage inserted by DPC 15/9/93
+%% make the declaration come on the page after the abstract.
+        \newpage
+        \declpage
+        \ifcopyright\copyrightpage\fi % moved to conform with 95 regs
+        }
+
+%% The declaration page above is the standard
+%% declaration, but if you want the other sort ( where you admit
+%% that parts of your thesis have been used elsewhere) then you'll
+%% have to hack it yourself -- just replace the text by what you'd like
+%%
+\def\prefacesection#1{%
+        \chapter*{#1}
+        \addcontentsline{toc}{chapter}{#1}}
+
+%% The \addvspace business below is to avoid the extra space that gets put
+%% in the tables of figures and tables between chapters (it makes no sense
+%% now that the numbering is continuous)
+\def\afterpreface{\newpage
+        \pagestyle{headings}}
+
+\pagestyle{headings}
+
+%% This produces the chapter title at the top of each page. It can be
+%% changed in the obvious way, e.g., \pagestyle{empty} or \pagestyle{plain}
+%%
+
+%%% DPC 15/9/93 Make the bibliography generate an entry in the table
+%%% of contents.
+
+\def\thebibliography#1{\chapter*{\bibname\@mkboth
+  {\uppercase{\bibname}}{\uppercase{\bibname}}}%
+  \addcontentsline{toc}{chapter}{\bibname}%
+  \list
+  {\@biblabel{\arabic{enumiv}}}{\settowidth\labelwidth{\@biblabel{#1}}%
+    \leftmargin\labelwidth
+    \advance\leftmargin\labelsep
+    \usecounter{enumiv}%
+    \let\p@enumiv\@empty
+    \def\theenumiv{\arabic{enumiv}}}%
+    \def\newblock{\hskip .11em plus.33em minus.07em}%
+    \sloppy\clubpenalty4000\widowpenalty4000
+    \sfcode`\.=\@m}
+
+\def\endthebibliography{%
+  \def\@noitemerr{\@warning{Empty `thebibliography' environment}}%
+  \endlist}
+