summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/tex/latex/ltxmisc
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2009-09-13 00:11:13 +0000
committerKarl Berry <karl@freefriends.org>2009-09-13 00:11:13 +0000
commit3e5bc6360786eddeda74db5c6fa1f67488ddd127 (patch)
tree7ede9911520aef20c92f247b74e44cfa19dd55a4 /Master/texmf-dist/tex/latex/ltxmisc
parent3e7a237fce2ef3ae8cc15af3a731af5eeea6c939 (diff)
selectp license update (12sep09)
git-svn-id: svn://tug.org/texlive/trunk@15250 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/tex/latex/ltxmisc')
-rw-r--r--Master/texmf-dist/tex/latex/ltxmisc/selectp.sty232
1 files changed, 0 insertions, 232 deletions
diff --git a/Master/texmf-dist/tex/latex/ltxmisc/selectp.sty b/Master/texmf-dist/tex/latex/ltxmisc/selectp.sty
deleted file mode 100644
index 1c4e609ff2c..00000000000
--- a/Master/texmf-dist/tex/latex/ltxmisc/selectp.sty
+++ /dev/null
@@ -1,232 +0,0 @@
-%
-% S E L E C T P . S T Y - Select pages for output
-%
-% Version 0.9 (test), Sept 25, 1992 (So much for keeping versions current!)
-%
-% By Donald Arseneau, asnd@reg.triumf.ca, based on macros in
-% TUGBoat, 8:2 (1987), p. 217 written by Don Knuth, and with
-% suggestions from Hossein Saiedian.
-%
-% This style allows selection of individual pages to be output by LaTeX
-% or plain TeX by specifying, for example,
-%
-% \outputonly{1,3, 7-12 16 17}
-%
-% The list of numbers should be in the order that TeX generates the pages.
-% The numbers should be separated by commas or spaces, and may include
-% ranges (7-12).
-%
-% More complete instructions follow \endinput
-
-
-% First, set catcode of @ in case it isn't a "letter" already
-\expandafter\edef\csname SP@catcode\endcsname
- {\catcode`\noexpand\@=\the\catcode`\@
- \let \csname SP@catcode\endcsname \noexpand\UnDefinedButNoAt}
-\catcode`\@=11
-
-% Allow plain TeX to use this style:
-
-\ifx\c@page\Und@Fynd
- \let\c@page \pageno
- \def\@empty{}% note: \ifx ignores the \global nature of macros for comparison
- \let\nofiles\relax
- \let\typeout\message
-\fi
-
-% Read list of selected pages
-
-\def\outputonly{\begingroup \catcode`\,13 \SP@outonly}
-
-\begingroup \catcode`\,13
-\gdef\SP@outonly#1{\edef,{\string,}\typeout{Only pages #1 will be output.}%
- \def,{ }\xdef\SP@geS{\SP@geS\space #1}% make commas be spaces
- \endgroup
- \nofiles % prevent writing partial .aux files
- \let\shipout\SP@shipout% replace shipout command
- \ifnum\SP@nextpage=-\maxdimen % if first \outputonly command...
- \SP@getnextpage \fi % get first page number from list
-}\endgroup
-
-\gdef\SP@geS{}
-
-% replace \shipout command with filter to select pages for output
-
-\let\plain@shipout=\shipout
-
-\newcount\SP@nextpage \global\SP@nextpage=-\maxdimen % flag as undefined
-\newcount\SP@expectpage \global\SP@expectpage=-\maxdimen
-
-\def\SP@getnextpage{\ifx\SP@geS\@empty \global\SP@nextpage\maxdimen
- \else % If more page numbers on list
- \afterassignment\SP@updPS \global\SP@nextpage\SP@geS\relax
- \fi}
-
-\def\SP@updPS#1\relax{\gdef\SP@geS{#1}}
-
-\def\SP@shipout{\relax %\showthe\c@page%
- \ifnum\SP@expectpage=-\maxdimen \global\SP@expectpage\c@page
- \else \global\advance\SP@expectpage\@ne
- \fi
- \ifnum\SP@expectpage=\c@page\else % page number has jumped,
- \ifnum\SP@nextpage<\z@ % if in middle of a range --
- \ifnum \AbsVal\c@page >\AbsVal\SP@expectpage\else % and jumping backward --
- \SP@getnextpage % read next number for sure
- \fi\fi
- \SP@catchup % Resynchronize
- \fi \global\SP@expectpage\c@page
- \ifnum\SP@nextpage<\z@ % either a `negative' page, or end of range
- \ifnum\c@page<\z@ % preamble pages in plain only match singly
- \ifnum\c@page=\SP@nextpage\SP@getnextpage \let\SP@dopage\plain@shipout\fi
- \else % look for range match
- \ifnum\c@page>-\SP@nextpage \else \let\SP@dopage\plain@shipout \fi
- \ifnum\c@page<-\SP@nextpage \else \SP@getnextpage \fi
- \fi
- \else % look for single match
- \ifnum\c@page=\SP@nextpage \SP@getnextpage \let\SP@dopage\plain@shipout \fi
- \fi \SP@dopage}
-
-\newbox\SP@garbage
-\def\SP@dopage{\deadcycles\z@ \setbox\SP@garbage=}
-
-% read list of desired pages to get resynchronized with actual page numbers.
-% \SP@catchup is called whenever the page number has a discontinuity.
-%
-\def\SP@catchup{%
- \ifnum \AbsVal\c@page >\AbsVal\SP@nextpage
- \ifx\SP@geS\@empty \def\SP@catchup{\global\SP@nextpage\maxdimen}\fi
- \SP@getnextpage
- \expandafter \SP@catchup
- \fi}
-
-% take absolute value of TeX number or dimension
-\def\AbsVal#1{\ifnum#1<\z@-\fi#1}
-
-\SP@catcode % restore @ catcode
-
-\endinput
-%
-% SELECTP.STY -- Select pages for output
-%
-% INSTRUCTIONS
-%
-% This style file defines the command \outputonly which selects specific
-% pages for output, much as \includeonly selects certain files for input.
-% To use selectp.sty in LaTeX, specify "selectp" as one of the document
-% style options and give the command \outputonly{_list_of_page_numbers_}
-% before \begin{document}. Only pages given in the list will be output
-% to the DVI file. For example
-%
-% \documentstyle[12pt,selectp,subeqn]{article}
-% \outputonly{1,3, 7-12 16 17}
-%
-% which will allow only pages 1,3,7,8,9,10,11,12,16,17 to be output.
-% For plain TeX, use \input{selectp.sty}.
-%
-% The number list should consist of numbers and number ranges (7-12, e.g.)
-% separated by commas or spaces. The order is not random but MUST BE THE
-% ORDER THAT THE PAGES ARE PRODUCED; normally this means the numbers must
-% always increase. If an invalid page number appears on the list, no pages
-% will be output until the list is re-synchronized or the document ends.
-%
-% Any time the document's page number does not increment normally,
-% selectp.sty tries to re-synchronize the page number with the \outputonly
-% list of numbers. This is necessary when \includeonly is used.
-%
-% Pages that are labeled with roman numerals or letters should still be
-% listed with a normal arabic number; page xi should be referred to as 6.
-%
-% In LaTeX, unfortunately, pages i and 1 are both number 1, so it is
-% tricky to skip over all the roman-numbered pages and then print
-% page 1. If there are 3 roman-numbered pages,
-% 1-3 will print pages i,ii,iii; not pages 1,2,3
-% 1-3,1-5 will print pages i,ii,iii,1,2,3,4,5
-% 1-3,8-12 will print pages i,ii,iii,8,9,10,11,19
-% 1,1-5 will print i,1,2,3,4,5
-% 1-6 prints pages i,ii,iii only, not pages 4,5,6 !!!
-% 0,2-6 prints pages 2,3,4,5,6, since there is no page 0 and the
-% outputonly page list is resynchronized when the actual page
-% number goes back to 1)
-%
-% The last example is illuminating. LaTeX looks for page 0, but can't find
-% it. It skips pages until the page number goes from 3(iii) to 1, at which
-% point it resynchronizes by reading "2" from the list, waiting for page 2
-% to be produced, and then writing page 2. Selectp then reads "-6", and
-% CONTINUES outputting pages until it has done page 6. As long as the
-% numbers of the intervening pages are less than 6 (the end of the range),
-% those pages will be printed.
-%
-% If there are no roman numeral pages, the number list is simple, because
-% the numbers must increase monotonically.
-%
-% LaTeX will not write auxilliary files while selecting output pages, so
-% the cross references and citations must be correct on the run BEFORE
-% using \outputonly. Unfortunately, this means you must produce the
-% full-size DVI file at least once.
-%
-% If multuple \outputonly commands are given, the lists are concatenated.
-%
-% In plain TeX, specify roman numeral pages as negative numbers, but do not
-% use ranges until getting to the ordinary (arabic) page numbers (e.g.,
-% \outputonly{-1,-2,-3,-4, 1-8}). In plain TeX specifying page 1 will NOT
-% print page i.
-%
-% If a page number in the list is not found, generally no more pages will be
-% printed. For example, suppose a document has 50 pages, the list 3 5 910 13
-% (which perhaps should read "9 10") causes LaTeX to process silently
-% through the whole document looking for page 910. Only pages 3 and 5 will
-% be printed.
-%
-% EXCEPT if the number terminating a RANGE is not found {3 5-910 13},
-% LaTeX continues outputting pages until the end.
-%
-% EXCEPT if the actual page number changes discontinuously, then the number
-% list MAY be scanned for the next number greater than the new page number.
-% (Jumps are usually due to the numbering being changed from roman to arabic
-% with the page reset to 1, or because an included file was skipped due to
-% an \includeonly command.) The list is scanned if the page number jumps
-% backward, or if it jumps forward PAST the current target page. ("Target
-% page" = the end of the current range or the next number to be printed out,
-% as appropriate.)
-%
-% Numbers must be integers: 4.3 is illegal, even if some other style file
-% is generating page numbers in that format.
-%
-% Of course non-numbers are illegal. Some plausible mistakes:
-% page, xvii, IV, 12--16, 49ff, 49-, 5_7.
-% 5_7 could be a typo for the range 5-7.
-% To specify page 49 and all following ("49ff" or "49-"), use a range
-% ending with a non-existent page: 49-99999.
-% The typo 12--16 prints pages 12 and 16, not the range 12 through 16 as
-% intended.
-%
-% EXAMPLES OF USE
-%
-% Suppose a document has pages i,ii,iii,iv,v,vi,1,2,3,...,33, but pages
-% 22...28 are absent due to \includeonly; here are some examples of valid
-% uses of \outputonly.
-%
-% \outputonly{15-20} -- prints only the 6 pages 15...20
-% \outputonly{1-3} -- prints pages i,ii,iii (in LaTeX)
-% -- plain TeX prints pages 1,2,3
-% \outputonly{1,1,2} -- prints pages i,1,2
-% \outputonly{0,1,2} -- prints pages 1,2
-% \outputonly{1,3-6} -- prints pages i,iii,iv,v,vi
-% \outputonly{4,3-6} -- prints pages iv,3,4,5,6
-% \outputonly{5,2} -- prints pages v,2
-% \outputonly{5-2} -- prints only page v only!
-% \outputonly{5-7} -- prints pages v,vi only!
-% \outputonly{1-33} -- prints pages i,ii,iii,iv,v,vi only!
-% \outputonly{29-99} -- prints pages 29,30,31,32,33
-% \outputonly{19-99} -- prints pages 19,20,21,29,30,31,32,33
-% \outputonly{24-32} -- prints pages 29,30,31,32
-% \outputonly{15-25,32} -- prints pages 15,16,17,18,19,20,21,32
-% \outputonly{0,4,23-27,31-99} -- prints pages 4,31,32,33
-%
-% Version 0.9 (test), Sept 25, 1992:
-%
-% Send problem reports to asnd@triumfcl.bitnet or asnd@Reg.triumf.ca
-%
-% test integrity:
-% brackets: round, square, curly, angle: () [] {} <>
-% backslash, slash, vertical, hat, tilde: \ / | ^ ~