ascelike

git-svn-id: svn://tug.org/texlive/trunk@680 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 516 insertions, 0 deletions

diff --git a/Master/texmf-dist/tex/latex/ascelike/ascelike.cls b/Master/texmf-dist/tex/latex/ascelike/ascelike.cls
new file mode 100644
index 00000000000..e6333a74244
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/ascelike/ascelike.cls
@@ -0,0 +1,516 @@
+%% File: ascelike.cls
+%%
+%% An unofficial LaTeX class file for preparing review manuscripts and
+%% camera-ready manuscripts for ASCE journals and conference proceedings
+%%
+%% =============================================
+%% IMPORTANT NOTICE:
+%% See the copyright and distribution conditions below.
+%%
+%% Copyright 1999:
+%%  Matthew R Kuhn
+%%  School of Engineering
+%%  University of Portland
+%%  5000 N Willamette Blvd
+%%  Portland OR  97203
+%%  USA
+%%  E-mail: kuhn@egr.up.edu
+%%
+%% This program can be redistributed and/or modified under the terms
+%% of the LaTeX Project Public License Distributed, available from the CTAN
+%% archives; either version 1.1 of the License, or any later version.  
+%% Most importantly, you may modify this file, but only if you rename it.
+%%
+%% This is a contributed file to the LaTeX2e system.
+%%
+%% This program consists of the files ascelike.cls and ascelike.bst
+%%
+%% -----------------------------------
+%%
+%% This document class produces manuscripts that roughly comply with
+%% the guidelines of the American Society of Civil Engineers.  However,
+%% it was not produced by ASCE, its agents, or employees; nor is it in
+%% any way sanctioned or approved by that organization.
+%%
+%% -----------------------------------
+%%
+%% Please note the following usage:
+%%
+%%   1) This is a LATEX2E class file; it will not work with LaTeX 2.09.
+%%
+%%   2) It requires the following supplementary files:
+%%        ifthen.sty    (part of the standard latex release)
+%%        setspace.sty  (produces doubles spacing for journal manuscripts)
+%%        endfloat.sty  (places figures and tables at the end of the manuscript
+%%      Without these files, it won't work.  All three files are available 
+%%      from the CTAN archive, currently at //http:www.tug.org/ctan.html
+%%
+%%   3) The following files can be used with the tool bibtex to produce 
+%%      ASCE-like reference citations and entries (with the weird use of 
+%%      quotation marks around titles, etc.)
+%%        ascelike.bst
+%%        ascelike.bib  (an example bibliographic database for use with bibtex)
+%%
+%%   3) There are several options.  The two main options are
+%%         Journal or Proceedings:
+%%         - "Journal" produces double-spaced manuscripts for ASCE journals.
+%%           It places tables and figures at the end of the manuscript, 
+%%           produces a list of table and list of figures.  Numbers the
+%%           appendices with Roman numerals.  Produces proper headings for 
+%%           sections, subsections, subsubsections, appendices, and abstract.  
+%%           Produces the proper page margins, and numbers the pages, 
+%%         - "Proceedings" produces camera-ready single-spaced manuscripts
+%%           for ASCE conference proceedings.  It places figures and tables
+%%           within the text.  It produces proper headings for 
+%%           sections, subsections, subsubsections, appendices, and abstract.  
+%%           Produces the proper page margins, and numbers the pages.
+%%
+%%       The remaining option override the defaults that are set by the
+%%       above formats:
+%%         - BackFigs or InsideFigs:
+%%           These can be used to override the default placement of tables
+%%           and figures for the Journal and Proceeding formats.
+%%         - SingleSpace or DoubleSpace:
+%%           These can be used to override the default text spacing for
+%%           the Journal and Proceeding formats.
+%%         - 10pt, 11pt, or 12pt:
+%%           These can be used to override the default text size (12pt).
+%%
+%% A few standard Latex options have been removed, as they don't seem to apply
+%%   in the ASCE environment: landscape, titlepage, openbib, leqno, fleqn
+%%
+%% As for preparing the document file: except for the new options, you
+%%   should just use standard sequencing of LaTeX commands.  
+%%
+%% The only new command that I've added is the \NameTag command which 
+%%   prints your name in the bottom right corner of every page (as with 
+%%   the ASCE shiny, camera-ready paper).  Insert it in the preamble of
+%%   your document file:  \NameTag{<your name>}.
+%%
+%% Please contact Matthew Kuhn by email for suggestions, etc.
+%%
+\typeout{}
+\NeedsTeXFormat{LaTeX2e}[1994/12/01]
+\ProvidesClass{ascelike}
+     [1999/06/25 asce-like manuscripts (Am. Soc. Civ. Engr.)]
+\typeout{}
+\RequirePackage{ifthen}[1994/11/15]
+%
+\newboolean{Proceedings}
+\newboolean{Journal}
+\newboolean{BackFigs}
+\newboolean{InsideFigs}
+\newboolean{SingleSpace}
+\newboolean{DoubleSpace}
+\newboolean{NoPageNumbers}
+\newcommand{\ptsize}{}
+%
+\DeclareOption{Proceedings}%
+              {\setboolean{Proceedings}{true}\setboolean{Journal}{false}}
+\DeclareOption{Journal}%
+              {\setboolean{Journal}{true}\setboolean{Proceedings}{false}}
+%
+\DeclareOption{BackFigs}%
+              {\setboolean{BackFigs}{true}\setboolean{InsideFigs}{false}}
+\DeclareOption{InsideFigs}%
+              {\setboolean{InsideFigs}{true}\setboolean{BackFigs}{false}}
+%
+\DeclareOption{DoubleSpace}%
+              {\setboolean{DoubleSpace}{true}\setboolean{SingleSpace}{false}}
+\DeclareOption{SingleSpace}%
+              {\setboolean{SingleSpace}{true}\setboolean{DoubleSpace}{false}}
+%
+% Declare text size options so that 12pt can be made the default option
+\DeclareOption{10pt}{\renewcommand{\ptsize}{10pt}}
+\DeclareOption{11pt}{\renewcommand{\ptsize}{11pt}}
+\DeclareOption{12pt}{\renewcommand{\ptsize}{12pt}}
+%
+\DeclareOption{NoPageNumbers}{\setboolean{NoPageNumbers}{true}}
+%
+\DeclareOption{landscape}{\OptionNotUsed}
+\DeclareOption{titlepage}{\OptionNotUsed}
+\DeclareOption{openbib}{\OptionNotUsed}
+\DeclareOption{leqno}{\OptionNotUsed}
+\DeclareOption{fleqn}{\OptionNotUsed}
+%
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
+%
+% Make 12pt and Journal the default options
+\ExecuteOptions{12pt,Journal}
+\ProcessOptions\relax
+%
+\LoadClass[oneside,onecolumn,letterpaper,final,\ptsize]{article}[1994/12/09]
+%
+% These *.sty packages must be installed along this *.cls file. Note that 
+%   the package endfloat.sty is also required further below in order to
+%   place figures at the end of the paper.
+%
+%
+% Use these defaults (can be changed with the BackFigs and InsideFigs options):
+%   For Journal manuscripts:     1) place figures at the end of the manuscript,
+%                                2) double spacing of text
+%
+%   For Proceedings manuscripts: 1) place figures within the text,
+%                                2) single spacing of text
+\ifthenelse{\boolean{Journal}}
+  {\ifthenelse{\boolean{InsideFigs}}{}{\setboolean{BackFigs}{true}}}
+  {\ifthenelse{\boolean{BackFigs}}{}{\setboolean{InsideFigs}{true}}}
+%
+\ifthenelse{\boolean{Journal}}
+  {\ifthenelse{\boolean{SingleSpace}}{}{\setboolean{DoubleSpace}{true}}}
+  {\ifthenelse{\boolean{DoubleSpace}}{}{\setboolean{SingleSpace}{true}}}
+%
+%
+% Various messages displayed on the screen:
+\typeout{}
+\ifthenelse{\boolean{Journal}}
+{\typeout{A "Journal" style manuscript will be produced}}
+{\typeout{A "Proceedings" style manuscript will be produced}}
+%
+\ifthenelse{\boolean{BackFigs}}
+{\typeout{%
+  Figures and Tables will be placed together at the end of the manuscript
+  (change with the 'InsideFigs' option)}}
+{\typeout{%
+  Figures and Tables will be placed within the text of the manuscript
+  (change with the 'BackFigs' option)}}
+%
+\ifthenelse{\boolean{DoubleSpace}}
+{\typeout{%
+  Text will be double spaced (change with the 'SingleSpace' option)}}
+{\typeout{%
+  Text will be single spaced (change with the 'DoubleSpace' option)}}
+%
+\typeout{Text will be \ptsize 
+ \space(change with the '10pt', '11pt', & '12pt' options)}
+\typeout{}
+%
+% Delay the possible loading of these packages until the beginning of   7-18-00
+% the document.  This should avoid conflicts with user-load versions    7-18-00
+% of the same packages.                                                 7-18-00
+\AtBeginDocument{%                                                      7-18-00
+\ifthenelse{\boolean{BackFigs}}
+{\RequirePackage[lists,noheads,nomarkers,tablesfirst]{endfloat}}{}
+\ifthenelse{\boolean{DoubleSpace}}
+{\RequirePackage{setspace}\doublespacing}{}
+}%                                                                      7-18-00
+%
+% Page layout for Proceedings manuscripts:
+\ifthenelse{\boolean{Proceedings}}
+{\setlength{\topmargin}     {0.25in}
+ \setlength{\headheight}    {0.00in}
+ \setlength{\headsep}       {0.00in}
+ \setlength{\textheight}    {8.83in}
+ \setlength{\footskip}      {0.40in}
+ \setlength{\oddsidemargin} {0.45in}
+ \setlength{\textwidth}     {5.71in}
+ \setlength{\marginparsep}  {0.00in}
+ \setlength{\marginparwidth}{0.00in}
+ \setlength{\marginparpush} {0.00in}}
+%
+% Page layout for Journal manuscripts:
+{\setlength{\topmargin}     {0.00in}
+ \setlength{\headheight}    {0.00in}
+ \setlength{\headsep}       {0.00in}
+ \setlength{\textheight}    {9.00in}
+ \setlength{\footskip}      {0.50in}
+ \setlength{\oddsidemargin} {0.00in}
+ \setlength{\textwidth}     {6.50in}
+ \setlength{\marginparsep}  {0.00in}
+ \setlength{\marginparwidth}{0.00in}
+ \setlength{\marginparpush} {0.00in}}
+%
+%
+% Author-year citations in the ASCE style.  The following code was
+%   adopted from the chicago.sty package.  I removed the 'long citation 
+%   style' to make all citations in the short style used by ASCE (i.e., 
+%   using "et. al" for multiple authors).  
+%
+% Here's an adaptation of chicago.sty notes for the various citation
+%   options that I've included:
+%
+%  \cite{key}
+%    which produces citations with full author list and year.
+%    eg. (Brown 1978; Jarke et al. 1985)
+%  \citeNP{key}
+%    which produces citations with full author list and year, but without
+%    enclosing parentheses:
+%    eg. Brown 1978; Jarke et. al 1985
+%  \citeA{key}
+%    which produces citations with only the full author list.
+%    eg. (Brown; Jarke et. al)
+%  \citeN{key}
+%    which produces citations with the full author list and year, but
+%    can be used as nouns in a sentence; no parentheses appear around
+%    the author names, but only around the year.
+%      eg. Shneiderman (1978) states that......
+%    \citeN should only be used for a single citation.
+%  \citeyear{key}
+%    which produces the year information only, within parentheses.
+%  \citeyearNP{key}
+%    which produces the year information only.
+%
+% `NP' means `no parentheses'.
+%
+\let\@internalcite\cite
+%
+% Place commas in-between citations in the same \citeyear, \citeyearNP,
+%  or \citeN command.
+% Use something like \citeN{ref1,ref2,ref3} and \citeN{ref4} for a list.
+%
+\newcommand{\citedata}%
+   {\@ifnextchar [{\@tempswatrue\@citedatax}%
+                  {\@tempswafalse\@citedatax[]}}
+%
+\def\@citedatax[#1]#2{%
+\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi%
+  \def\@citea{}\@cite{\@for\@citeb:=#2\do%
+    {\@citea\def\@citea{, }\@ifundefined% by Young
+       {b@\@citeb}{{\bf ?}%
+       \@warning{Citation `\@citeb' on page \thepage \space undefined}}%
+{\csname b@\@citeb\endcsname}}}{#1}}%
+%
+\def\@citex[#1]#2{%
+\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi%
+  \def\@citea{}\@cite{\@for\@citeb:=#2\do%
+    {\@citea\def\@citea{; }\@ifundefined% by Young
+       {b@\@citeb}{{\bf ?}%
+       \@warning{Citation `\@citeb' on page \thepage \space undefined}}%
+{\csname b@\@citeb\endcsname}}}{#1}}%
+%
+\renewcommand{\cite}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{(##1\if@tempswa , ##2\fi)}%
+    \def\citeauthoryear##1##2##3{##2 ##3}\@internalcite}
+\newcommand{\citeNP}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{##1\if@tempswa , ##2\fi}%
+    \def\citeauthoryear##1##2##3{##2 ##3}\@internalcite}
+\newcommand{\citeN}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{##1\if@tempswa , ##2)\else{)}\fi}%
+    \def\citeauthoryear##1##2##3{##2 (##3}\citedata}
+\newcommand{\citeA}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{(##1\if@tempswa , ##2\fi)}%
+    \def\citeauthoryear##1##2##3{##2}\@internalcite}
+\newcommand{\citeyear}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{(##1\if@tempswa , ##2\fi)}%
+    \def\citeauthoryear##1##2##3{##3}\citedata}
+\newcommand{\citeyearNP}%
+   {\def\@citeseppen{-1000}%
+    \def\@cite##1##2{##1\if@tempswa , ##2\fi}%
+    \def\citeauthoryear##1##2##3{##3}\citedata}
+%
+%
+% An ASCE-like title on the first page
+\renewcommand{\maketitle}{
+  \begingroup
+    \renewcommand{\thefootnote}{\arabic{footnote}}%
+    \ifthenelse{\boolean{@twocolumn}}
+      {\ifthenelse{\equal{\col@number}{\@ne}}
+                  {\@maketitle}
+                  {\twocolumn[\@maketitle]}}%
+      {\newpage
+       \global\@topnum\z@   % Prevents figures from going at top of page.
+       \@maketitle}
+    \@thanks
+  \endgroup
+  \setcounter{footnote}{0}%
+  \let\thanks\relax
+  \let\maketitle\relax\let\@maketitle\relax
+  \gdef\@thanks{}\gdef\@author{}\gdef\@title{}}
+%
+\renewcommand{\@maketitle}{%
+  \newpage
+  \null
+% \begin{center}%
+    \ifthenelse{\boolean{Journal}}
+               {\vspace{0.00in}}
+               {\vspace{1.40in}}%
+    \centering
+    {\large\bfseries\@title\par}%
+     \vspace{1.0em}%
+    {\normalsize\normalfont
+      \begin{tabular}[t]{c}%
+        \@author
+      \end{tabular}\par}%
+% \end{center}%
+  \par
+  \vspace{0.5em}}%
+%
+%
+% An ASCE-like abstract
+\renewcommand{\abstractname}{ABSTRACT}
+\renewenvironment{abstract}
+  {\ifthenelse{\boolean{Proceedings}}
+     {\section*{\small\abstractname}\small}%
+     {\section*{\abstractname}}%
+  }
+  {\normalsize}
+%
+%
+% ASCE-like section, subsection, and subsubsection headings
+\setcounter{secnumdepth}{0}
+\renewcommand{\section}{\secdef\Section\sSection}
+\newcommand{\Section}[2][?]{%
+   \refstepcounter{section}%
+   \par{\flushleft\normalsize\bfseries\sffamily\uppercase{#2}\par}\nopagebreak}
+\newcommand{\sSection}[1]{%
+   \refstepcounter{section}%
+   \par{\flushleft\bfseries\sffamily\uppercase{#1}\par}\nopagebreak}
+%
+\renewcommand{\subsection}{\@startsection{subsection}{2}{0in}%
+                            {1.00ex\@plus 1ex \@minus .2ex}%
+                            {0.2ex \@plus .2ex}%
+                            {\normalfont\normalsize\bfseries}}
+%
+\renewcommand{\subsubsection}{\@startsection{subsubsection}{3}{0in}%
+                               {1.00ex\@plus 1ex \@minus .2ex}%
+                               {0.2ex \@plus .2ex}%
+                               {\normalfont\normalsize\itshape}}
+%
+\newcommand{\RefSectionType}{\section*}
+\ifthenelse{\boolean{Journal}}{\renewcommand{\RefSectionType}{\section}}{}%
+%
+%
+% ASCE-like appendix headings.  In order to get appendix heading such as
+%   'Appendix II: Notation' you must insert the line '\appendix' in your
+%   document *.tex file at the start of the appendices.
+%
+\renewcommand{\appendixname}{APPENDIX}
+\renewcommand{\appendix}{%
+  \renewcommand{\section}{%
+    \ifthenelse{\boolean{Journal}}
+      {\newpage}{}%
+    \secdef\Appendix\sAppendix}%
+  \setcounter{section}{0}%
+  \renewcommand{\thesection}{\Roman{section}}%
+}
+\newcommand{\Appendix}[2][]{%
+   \refstepcounter{section}%
+   {%
+    \flushleft\normalsize\bfseries\sffamily\appendixname\ %
+    \thesection. \uppercase{#1}\par}\nopagebreak}%
+\newcommand{\sAppendix}[1]{%
+   {\flushleft\normalsize\bfseries\sffamily\uppercase{#1}\par}\nopagebreak}%
+%
+%
+% An ASCE-like "enumerate" environment for numbered lists
+\newcounter{enumnoo}
+\renewenvironment{enumerate}
+{\begin{list}
+             {\arabic{enumnoo}.}%
+             {\usecounter{enumnoo}%
+              \setlength{\labelwidth}{2em}%
+              \setlength{\labelsep}{0.7em}%
+              \setlength{\itemindent}{0em}%
+              \setlength{\listparindent}{3em}%
+              \setlength{\leftmargin}{3em}%
+              \setlength{\rightmargin}{0em}%
+              \setlength{\parsep}{0ex}%
+              \setlength{\topsep}{2ex}%
+              \setlength{\itemsep}{0ex}%
+             }%
+}
+{\end{list}}%
+%
+%
+% An ASCE-like "itemize" environment for 'bulleted' items
+\renewenvironment{itemize}
+{\begin{list}
+             {\labelitemi}%
+             {\setlength{\labelwidth}{1em}%
+              \setlength{\labelsep}{0.7em}%
+              \setlength{\itemindent}{0em}%
+              \setlength{\listparindent}{3em}%
+              \setlength{\leftmargin}{3em}%
+              \setlength{\rightmargin}{0em}%
+              \setlength{\parsep}{0ex}%
+              \setlength{\topsep}{2ex}%
+              \setlength{\itemsep}{0ex}%
+             }%
+}
+{\end{list}}%
+%
+%
+% ASCE-like figure labels
+\renewcommand{\figurename}{FIG.}
+\renewcommand{\tablename}{TABLE}
+\newsavebox{\TempBoxb}
+\newlength{\TempBoxl}
+\setlength{\belowcaptionskip}{1.5ex}
+\renewcommand{\@makecaption}[2]{%
+  \savebox{\TempBoxb}{\rule{0em}{3ex}\sffamily\bfseries\normalsize#1.%
+                      \makebox[1em]{}\sffamily\bfseries\normalsize#2}%
+  \settowidth{\TempBoxl}{\usebox{\TempBoxb}}
+  \ifthenelse{\lengthtest{\TempBoxl > \textwidth}}
+    {\sffamily\bfseries\normalsize#1.  \sffamily\bfseries\normalsize#2\par}%
+    {\centering \usebox{\TempBoxb}}
+  \vskip\belowcaptionskip}%
+%
+%
+% Float parameters suggested by G. Granger in TUGboat 15(2)
+\setcounter{topnumber}{2}
+\setcounter{bottomnumber}{2}
+\setcounter{totalnumber}{4}
+\setcounter{dbltopnumber}{2}
+\renewcommand{\topfraction}{0.9}
+\renewcommand{\bottomfraction}{0.5}
+\renewcommand{\textfraction}{0.1}
+\renewcommand{\floatpagefraction}{0.8}
+\renewcommand{\dbltopfraction}{0.9}
+\renewcommand{\dblfloatpagefraction}{0.8}
+%
+%
+% An ASCE-like layout of the bibliographic items
+\renewcommand{\refname}{REFERENCES}
+\def\@biblabel#1{}
+\bibindent=1.0em
+\renewenvironment{thebibliography}[1]
+     {\par%
+      \RefSectionType{\refname%
+        \@mkboth{\refname}{\refname}}%
+      \list{[\arabic{enumiv}]}%
+           {%\settowidth\labelwidth{\@biblabel{#1}}%
+            \setlength{\labelwidth}{0em}
+            \leftmargin\labelwidth
+            \setlength{\labelsep}{0.in}
+            \advance\leftmargin\labelsep
+            \advance\leftmargin\bibindent
+            \itemindent -\bibindent
+            \listparindent \itemindent
+            \setlength{\itemsep}{0ex}%
+            \setlength{\topsep}{0ex}%
+            \parsep \z@
+            \usecounter{enumiv}%
+            \let\p@enumiv\@empty
+            \renewcommand{\theenumiv}{\arabic{enumiv}}}%
+      \sloppy\clubpenalty4000\widowpenalty4000%
+      \sfcode`\.=\@m}
+     {\def\@noitemerr
+       {\@latex@warning{Empty `thebibliography' environment}}%
+      \endlist}
+\renewcommand{\newblock}{}
+%
+% A new commond for "tagging" the author's name on the bottom right
+%   corner of the page (as per the ASCE shiny, camera-ready blank paper)
+\newcommand{\NameTag}[1]
+  {\newlength{\LeftFootSpace}
+   \settowidth{\LeftFootSpace}{#1}
+   \renewcommand{\@oddfoot}{\hspace{\LeftFootSpace}\hfill\thepage\hfill#1}
+  }
+\newcommand{\KeyWordName}{Keywords}
+\newcommand{\KeyWords}[1]
+  {\par\noindent\rule{0em}{3ex}%
+   \sffamily\bfseries\KeyWordName: %
+   \normalfont#1}
+%
+\AtEndOfClass
+  {\bibliographystyle{ascelike}
+   \ifthenelse{\boolean{NoPageNumbers}}
+      {\pagestyle{empty}}
+      {\pagestyle{plain}}
+  }
+%