summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2015-03-29 20:33:25 +0000
committerKarl Berry <karl@freefriends.org>2015-03-29 20:33:25 +0000
commitf89210e4bfe23e19b776261dcabb9292f457e972 (patch)
tree2a77faa4a4af998f2cf6b4b70e161c5997ffe076 /Master/texmf-dist/source
parentb80af2581687d9eec04d7e035c53431701307476 (diff)
rm csvtools, replaced by datatools
git-svn-id: svn://tug.org/texlive/trunk@36672 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/csvtools/csvtools.dtx2536
-rw-r--r--Master/texmf-dist/source/latex/csvtools/csvtools.ins23
2 files changed, 0 insertions, 2559 deletions
diff --git a/Master/texmf-dist/source/latex/csvtools/csvtools.dtx b/Master/texmf-dist/source/latex/csvtools/csvtools.dtx
deleted file mode 100644
index f11d5e4452c..00000000000
--- a/Master/texmf-dist/source/latex/csvtools/csvtools.dtx
+++ /dev/null
@@ -1,2536 +0,0 @@
-%\iffalse
-% csvtools.dtx generated using makedtx version 0.91b (c) Nicola Talbot
-% Command line args:
-% -src "csvtools\.sty\Z=>csvtools.sty"
-% -src "csvpie\.sty\Z=>csvpie.sty"
-% -src "csvsort\.sty\Z=>csvsort.sty"
-% -doc "manual.tex"
-% -author "Nicola Talbot"
-% -dir "source"
-% csvtools
-% Created on 2007/7/3 10:24
-%\fi
-%\iffalse
-%<*package>
-%% \CharacterTable
-%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%% Digits \0\1\2\3\4\5\6\7\8\9
-%% Exclamation \! Double quote \" Hash (number) \#
-%% Dollar \$ Percent \% Ampersand \&
-%% Acute accent \' Left paren \( Right paren \)
-%% Asterisk \* Plus \+ Comma \,
-%% Minus \- Point \. Solidus \/
-%% Colon \: Semicolon \; Less than \<
-%% Equals \= Greater than \> Question mark \?
-%% Commercial at \@ Left bracket \[ Backslash \\
-%% Right bracket \] Circumflex \^ Underscore \_
-%% Grave accent \` Left brace \{ Vertical bar \|
-%% Right brace \} Tilde \~}
-%</package>
-%\fi
-% \iffalse
-% Doc-Source file to use with LaTeX2e
-% Copyright (C) 2007 Nicola Talbot, all rights reserved.
-% \fi
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage[colorlinks,
- bookmarks,
- hyperindex=false,
- pdfauthor={Nicola Talbot},
- pdftitle={csvtools: A LaTeX2e Package Providing Access to Data Saved in a CSV File},
- pdfkeywords={LaTeX,package,csv}]{hyperref}
-\usepackage{csvpie}
-\usepackage{colortbl}
-
-
-\renewcommand{\usage}[1]{\hyperpage{#1}}
-\renewcommand{\main}[1]{\hyperpage{#1}}
-\newcommand{\see}[2]{\emph{see} #1}
-\makeatletter
-\def\index@prologue{\section*{Index}}
-\makeatother
-\RecordChanges
-\PageIndex
-\CheckSum{1878}
-\OnlyDescription
-\newcommand{\stynamefmt}[1]{\textsf{#1}}
-\newcommand{\envname}[1]{\textsf{#1}}
-
-
-\newcommand{\cmdname}[1]{\texttt{\symbol{92}#1}}
-
-\iffalse
- Doc-Source file to use with LaTeX2e
- Copyright (C) 2003 Nicola Talbot, all rights reserved.
-\fi
-
-
- \newcounter{example}
- \newenvironment{example}[2]{\refstepcounter{example}\label{#2}%
-\subsection*{Example \theexample\ (#1)}%
-\addcontentsline{loe}{section}{\protect\numberline{\theexample}#1}}{\par\centerline{\rule{2in}{1pt}}\par}
-
-\begin{document}
-\DocInput{csvtools.dtx}
-\end{document}
-%</driver>
-%\fi
-% \DeleteShortVerb{\|}
-% \MakeShortVerb{"}
-% \title{csvtools v1.24 : A \LaTeXe\ Package Providing Access to Data Saved in a CSV File}
-% \author{Nicola Talbot}
-% \date{3rd July 2007}
-% \maketitle
-% \tableofcontents
-%
-%\section*{List of Examples}
-%
-%\makeatletter\@starttoc{loe}\makeatother
-%
-% \section{Introduction}
-% The \stynamefmt{csvtools} package allows you to repeatedly perform
-% a set of \LaTeX\ commands on data in each row
-% of a comma separated variable (CSV) file.
-% This can be used for mail merging, generating
-% tables etc.
-%
-%\changes{1.2}{2006 Sept 1}{separator can now be changed}%
-%As from version 1.2, you can specify a different separator.
-%To change the separator, use the command:\\[10pt]
-%\DescribeMacro{\setcsvseparator}\cmdname{setcsvseparator}\{\meta{separator}\}\\[10pt]
-%For example, if your data is separated by colons instead of
-%commas, do:
-%\begin{verbatim}
-%\setcsvseparator{:}
-%\end{verbatim}
-%\changes{1.2}{2006 Sept 1}{entries can be delimited with double quotes}%
-%If your separator occurs within an entry, the entry must be
-%enclosed in double quotes, for example:
-%\begin{verbatim}
-%Name,Address,Telephone
-%A.N. Other,"1 The Street,The Town",0123456789
-%\end{verbatim}
-%Be careful of \TeX\ special characters occuring within a CSV
-%file, for example:
-%\begin{verbatim}
-%Name,Address,Telephone
-%Jack \& Jill,"2 The Street,The Town",0123456789
-%\end{verbatim}
-%
-% \section{Mail Merging and Similar Applications}
-%
-%\DescribeMacro{\applyCSVfile}\noindent
-% \cmdname{applyCSVfile}[\meta{n}]\{\meta{filename}\}\{\meta{text}\}\\
-% \cmdname{applyCSVfile*}[\meta{n}]\{\meta{filename}\}\{\meta{text}\}\\[10pt]
-% Letters can be generated using data given in
-% each line from \meta{filename}.
-% If the CSV file contains a header row, the
-% unstarred version of \cmdname{applyCSVfile} should
-% be used, otherwise the starred version \cmdname{applyCSVfile*}
-% should be used. The optional argument \meta{n}
-% specifies on which line the actual data (not header line)
-% starts. The unstarred version defaults to line 2
-% (the header row is always assumed to be on line 1)
-% and the starred version defaults to 1.
-%
-% With the unstarred version, the entries in the header row
-% are used to generate commands of the form
-% \DescribeMacro{\insert...}\cmdname{insert}\meta{identifier}\footnote{See Note~\ref{itm:insert} in Section~\ref{sec:drawbacks}}
-% to access corresponding elements
-% in the row currently being processed. For example,
-% suppose the first line of the CSV file looks like:
-%\begin{verbatim}
-%Name,Address,Time,Date
-%\end{verbatim}
-% then the commands \cmdname{insertName}, \cmdname{insertAddress},
-% \cmdname{insertTime} and \cmdname{insertDate} are
-% created, allowing you to use the entries in the first,
-% second, third and fourth columns of the current row.
-% If the header text contains non-alphabetical characters,
-% e.g.\ \texttt{Full Name}, then you will need to use
-% \DescribeMacro{\insertbyname}\cmdname{insertbyname}\texttt{\{}\meta{text}\texttt{\}},
-% e.g.\ \verb'\insertbyname{Full Name}'.
-%
-%Alternatively, you can use the
-%\DescribeMacro{\field}\cmdname{field}\{\meta{col}\} command, where
-%\meta{col} is the column number of the entry, so \verb"\field{1}"
-%indicates the first entry in the current row and \verb"\field{2}"
-%indicates the second entry in the current row.
-%
-% \begin{example}{Mail Merging}{ex:mail}
-% Suppose there is a file called \texttt{details.csv} that has the
-% following contents:
-%\begin{verbatim}
-%Name,Address,Time,Date
-%Miss A. Person,1 The Road\\The Town\\AB1 2XY,15.00,4th May 2004
-%Mr A. N. Other,2 The Road\\The Town\\AB1 2XY,15.30,11th May 2004
-%\end{verbatim}
-%then the following code can be used to generate a letter for each
-%person in the CSV file\footnote{Remeber to use a letter type of
-%class file}:
-%\begin{verbatim}
-%\applyCSVfile{details.csv}{%
-%\begin{letter}{\insertName\\\insertAddress}
-%\opening{Dear \insertName}
-%
-%You are invited to an interview at \insertTime\ on the \insertDate.
-%
-%\closing{Yours Sincerely}
-%\end{letter}}
-%\end{verbatim}
-% Note that you could also use \verb'\insertbyname{Name}' etc instead
-% of \cmdname{insertName} etc. Also note that you need to specify the
-% file extension when specifying the filename.
-%\end{example}
-%
-% \begin{example}{Multiple Figures}{ex:ps}
-% Suppose \texttt{sample3.csv} looks like:
-%\begin{verbatim}
-%File,Caption
-%circle.ps,A Circle
-%rectangle.ps,A Rectangle
-%triangle.ps,A Triangle
-%\end{verbatim}
-% Assuming that the files \texttt{circle.ps}, \texttt{rectangle.ps}
-% and \texttt{triangle.ps} exist, then the following code will
-% generate a figure for each graphics file\footnote{The
-% \stynamefmt{graphics} or \stynamefmt{graphicx} package will be
-%needed.}:
-%\begin{verbatim}
-%\applyCSVfile{sample3.csv}{
-%\begin{figure}
-%\centerline{\includegraphics{\insertFile}}
-%\caption{\insertCaption}
-%\end{figure}}
-%\end{verbatim}
-% Note that in this example, you can't use \verb'\insertbyname{File}'.
-% (See Note~\ref{itm:psbyname} in Section~\ref{sec:drawbacks}.)
-%\end{example}
-%
-% \begin{example}{Mail Merging using \cmdname{field}}{ex:field}
-% Suppose there is a file called \texttt{details.csv} that has the
-% following contents:
-%\begin{verbatim}
-%Miss A. Person,1 The Road\\The Town\\AB1 2XY,15.00,4th May 2004
-%Mr A. N. Other,2 The Road\\The Town\\AB1 2XY,15.30,11th May 2004
-%\end{verbatim}
-%In this case the data has no header file, so the starred version
-%of \cmdname{applyCSVfile} must be used. Since there is no header
-%file, you must use \cmdname{field} to access the entries:
-%\begin{verbatim}
-%\applyCSVfile*{details.csv}{%
-%\begin{letter}{\field{1}\\\field{2}}
-%\opening{Dear \field{1}}
-%
-%You are invited to an interview at \field{3}\ on the \field{4}.
-%
-%\closing{Yours Sincerely}
-%\end{letter}}
-%\end{verbatim}
-%\end{example}
-%
-% \section{Converting data in a CSV file into a tabular environment}
-% \DescribeMacro{\CSVtotabular}
-% \cmdname{CSVtotabular}\{\meta{filename}\}\{\meta{col-align}\}\{\meta{first}\}\{\meta{middle}\}\{\meta{last}\}\\[10pt]
-% \meta{filename} is the name of the CSV file which must have a header row on line~1,
-% \meta{col-align} is the column alignment argument that gets passed
-% to the \envname{tabular} environment, \meta{first}
-% is the code for the first line, \meta{middle} is the code
-% for the middle lines and \meta{last} is the code for the last line.
-% This is best demonstrated with an example.
-%
-% \begin{example}{Aligning Data from a CSV file}{ex:tab1}
-% Suppose the file \texttt{sample.csv} looks like:
-%\begin{verbatim}
-%Name,Assignment 1,Assignment 2,Total
-%A. Smith,80,70,150
-%B. Jones,60,80,140
-%J. Doe,85,75,160
-%,75,75,150
-%\end{verbatim}
-% then the following code can be used to align the data:
-%\begin{verbatim}
-%\CSVtotabular{sample.csv}{lccc}{%
-%\bfseries Name &
-%\bfseries Assignment 1&
-%\bfseries Assignment 2&
-%\bfseries Total\\}{%
-%\insertName &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal\\}{%
-% &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal}
-%\end{verbatim}
-% The result of this code is shown in
-% Table~\ref{tab:ex1}\footnote{Note that \cmdname{CSVtotabular} only
-% puts the data in a \envname{tabular} environment not in a table}.
-%\begin{table}
-%\caption{Example~\ref{ex:tab1}}
-%\label{tab:ex1}
-%\vspace{10pt}
-%\centerline{%
-%\begin{tabular}{lccc}
-%\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\
-%A. Smith&80&70&150\\
-%B. Jones&60&80&140\\
-%J. Doe&85&75&160\\
-% &75&75&150
-%\end{tabular}}
-%\end{table}
-%\end{example}
-%
-% \vspace{10pt}
-% \DescribeMacro{\ifnextrowlast}
-% \cmdname{ifnextrowlast}\{\meta{last-code}\}\{\meta{not-last-code}\}\\[10pt]
-% The command \cmdname{ifnextrowlast} can be used to vary what happens
-% on the last but one row. The following example illustrates
-% this by placing \cmdname{hline}\cmdname{hline} after the penultimate row.
-%
-% \begin{example}{Adding Lines}{ex:tab2}
-%\begin{verbatim}
-%\CSVtotabular{sample.csv}{|l|ccc|}{%
-%\hline\bfseries Name &
-%\bfseries Assignment 1&
-%\bfseries Assignment 2&
-%\bfseries Total\\\hline\hline}{%
-%\insertName &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal
-%\ifnextrowlast{\\\hline\hline}{\\}}{%
-% &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal\\\hline}
-%\end{verbatim}
-%This result of this code is shown in Table~\ref{tab:ex2}.\begin{table}
-%\caption{Example~\ref{ex:tab2}}
-%\label{tab:ex2}
-%\vspace{10pt}
-%\begin{center}
-%\begin{tabular}{|l|ccc|}
-%\hline\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\hline\hline
-%A. Smith&80&70&150\\
-%B. Jones&60&80&140\\
-%J. Doe&85&75&160\\\hline\hline
-% &75&75&150\\\hline
-%\end{tabular}
-%\end{center}
-%\end{table}
-%\end{example}
-%
-% \begin{example}{Added Complexity}{ex:tab3}
-% In this example, \cmdname{multicolumn} is used to override
-% the column specifier for the first column in the
-% last row.
-%\begin{verbatim}
-%\CSVtotabular{sample2.csv}{|l|ccc|}{%
-%\hline\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\hline\hline
-%}{%
-%\insertName &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal
-%\ifnextrowlast{\\\hline\multicolumn{1}{l|}{}}{\\}
-%}{%
-% &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal\\\cline{2-4}
-%}
-%\end{verbatim}
-% Notice that instead of placing \verb'\multicolumn{1}{l|}{}'
-% at the start of the final argument, it is instead
-% placed in the first argument to \cmdname{ifnextrowlast}\footnote{See
-% Note~\ref{itm:noalign} in Section~\ref{sec:drawbacks}}.
-%The result of this code is shown in Table~\ref{tab:ex3}.\begin{table}
-%\caption{Example~\ref{ex:tab3}}
-%\label{tab:ex3}
-%\vspace{10pt}
-%\begin{center}
-%\begin{tabular}{|l|ccc|}
-%\hline\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\hline\hline
-%A. Smith&80&70&150\\
-%B. Jones&60&80&140\\
-%J. Doe&85&75&160\\\hline
-% \multicolumn{1}{l|}{}&75&75&150\\\cline{2-4}
-%\end{tabular}
-%\end{center}
-%\end{table}
-%\end{example}
-%
-% \section{Converting CSV file into longtable environment}
-%\DescribeMacro{\CSVtolongtable}
-%The command \cmdname{CSVtolongtable} works in the same way as \cmdname{CSVtotabular} but
-% creates a \envname{longtable} environment instead of a \envname{tabular} environment.
-%
-%\begin{example}{Using a longtable environment}{ex:long}
-%Suppose the CSV file in the previous example, contains, say, 100 entries.
-%This will no longer fit onto one page, so it would be better to use
-%\envname{CSVtolongtable} instead. For example:
-%\begin{verbatim}
-%\CSVtolongtable{sample.csv}{|l|ccc|}{%
-%\caption{Student Marks}\label{tab:students}\\
-%\hline
-%\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\hline
-%\endfirsthead
-%\caption[]{Student Marks}\\
-%\hline
-%\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\hline
-%\endhead
-%\hline
-%\multicolumn{3}{r}{\em Continued on next page}
-%\endfoot
-%\hline
-%\endlastfoot}{%
-%\insertName &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal
-%\ifnextrowlast{\\\hline\hline}{\\}}{%
-% & \insertbyname{Assignment 1} &
-% \insertbyname{Assignment 2} &
-%\insertTotal\\}
-%\end{verbatim}
-%\end{example}
-%
-% \section{Associated Counters}
-%
-% Within the \cmdname{CSVtotabular}, \cmdname{CSVtolongtable} and
-%\cmdname{applyCSVfile} commands, there are two
-% counters, \DescribeMacro{csvlinenum}\DescribeMacro{csvrownumber}%
-% \texttt{csvlinenum} and \texttt{csvrownumber}.
-% The former, \texttt{csvlinenum}, is the current line number in the CSV
-% file, whereas the latter, \texttt{csvrownumber}, is the current
-% data row. Of the two counters, \texttt{csvrownumber} is likely to be
-% the most useful.
-%
-% \begin{example}{Stripy Table}{ex:stripy}
-%David~Carlisle's \stynamefmt{colortbl} package defines the command
-%\cmdname{rowcolor} which enables you to specify the row colour.
-%Suppose you want a stripy table\footnote{This is designed as an
-%example of how to use the package, not incouragement to produce
-%garish tables!},
-% this can be achieved as follows:
-%\begin{verbatim}
-%\CSVtotabular{sample2.csv}{lccc}{%
-%\rowcolor{green}\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\rowcolor{blue}
-%}{%
-%\insertName &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal
-%\ifthenelse{\isodd{\value{csvrownumber}}}{%
-%\\\rowcolor{green}}{\\\rowcolor{blue}}
-%}{%
-% &
-%\insertbyname{Assignment 1} &
-%\insertbyname{Assignment 2} &
-%\insertTotal
-%}
-%\end{verbatim}
-%The resulting table is illustrated in Table~\ref{tab:stripy}.
-%\begin{table}[htb]
-%\caption{Stripy Table Example}
-%\label{tab:stripy}
-%\vspace{10pt}
-%\setcounter{csvrownumber}{0}
-%\begin{tabular}{lccc}
-%\rowcolor{green}\bfseries Name &
-%\bfseries Assignment 1 &
-%\bfseries Assignment 2 &
-%\bfseries Total\\\rowcolor{blue}
-%\refstepcounter{csvrownumber}A. Smith &
-%80 &
-%70 &
-%150
-%\ifthenelse{\isodd{\value{csvrownumber}}}{\\\rowcolor{green}}{\\\rowcolor{blue}}
-%\refstepcounter{csvrownumber}B. Jones &
-%60 &
-%80 &
-%140
-%\ifthenelse{\isodd{\value{csvrownumber}}}{\\\rowcolor{green}}{\\\rowcolor{blue}}
-%\refstepcounter{csvrownumber}J. Doe &
-%85 &
-%75 &
-%160
-%\ifthenelse{\isodd{\value{csvrownumber}}}{\\\rowcolor{green}}{\\\rowcolor{blue}}
-%\refstepcounter{csvrownumber} &
-%75 &
-%75 &
-%150
-%\end{tabular}
-%\end{table}
-%\end{example}
-%
-%\begin{example}{More Mail Merging}{ex:mailref}
-%This is an example of mail merging where the letter reference
-%is generated from the value of \texttt{csvrownumber}. The CSV file
-%is as used in Example~\ref{ex:mail} on page~\pageref{ex:mail}.\begin{verbatim}
-%\applyCSVfile{details.csv}{%
-%\begin{letter}{\insertName\\\insertAddress}
-%\opening{Dear \insertName}
-%
-%\textbf{Ref : } interview.\thecsvrownumber
-%
-%You are invited to an interview at \insertTime\ on the \insertDate.
-%
-%\closing{Yours Sincerely}
-%\end{letter}}
-%\end{verbatim}
-%\end{example}
-%
-% \section{Cross-Referencing}
-%
-% Labels can be generated using the standard
-% \cmdname{label} command, but you will need some way
-% to make each label unique. Example~\ref{ex:ref1}
-% does this by using \cmdname{thecsvrownumber},
-% whereas Example~\ref{ex:ref2} uses \cmdname{insert}\meta{identifier}.
-%
-% \begin{example}{Labelling within \cmdname{applyCSVfile}}{ex:ref1}
-% Example~\ref{ex:ps} on page~\pageref{ex:ps} can be modified to label each figure:
-%\begin{verbatim}
-%\applyCSVfile{sample3.csv}{
-%\begin{figure}
-%\centerline{\includegraphics{\insertFile}}
-%\caption{\insertCaption}
-%\label{fig:pic\thecsvrownumber}
-%\end{figure}}
-%\end{verbatim}
-% This example uses
-% \verb'\label{fig:pic\thecsvrownumber}', so the first figure
-%generated by this \cmdname{applyCSVfile} command will have the
-%label \texttt{fig:pic1}, the second \texttt{fig:pic2} etc.
-%\end{example}
-%
-% \begin{example}{Labelling within \cmdname{applyCSVfile}}{ex:ref2}
-% Modifying the previous example, we now have:
-%\begin{verbatim}
-%\applyCSVfile{sample3.csv}{
-%\begin{figure}
-%\centerline{\includegraphics{\insertFile}}
-%\caption{\insertCaption}
-%\label{fig:\insertFile}
-%\end{figure}}
-%\end{verbatim}
-% The labels for each figure are now:
-% \texttt{fig:circle.ps}, \texttt{fig:rectangle.ps}
-% and \texttt{fig:triangle.ps}, respectively.
-%\end{example}
-%
-%\begin{example}{Labelling within \cmdname{CSVtotabular}}{ex:timetogrowth}
-% This example is slightly more complicated.
-% The CSV file, \texttt{data.csv} looks like:
-%\begin{verbatim}
-%Incubation Temperature,Incubation Time,Time to Growth
-%40,120,40
-%40,90,60
-%35,180,20
-%\end{verbatim}
-%The following code generates a table using the data
-% with an additional column that generates the experiment
-% number. (See note~\ref{itm:csvrownumber}.)
-%\begin{verbatim}
-%\begin{table}
-%\caption{Time to Growth Experiments}
-%\label{tab:exp}
-%\vspace{10pt}
-%\centering
-%\CSVtotabular{data.csv}{cccc}{%
-% % Header Row
-%\bfseries Experiment &
-%\bfseries \begin{tabular}{c}Incubation\\Temperature\end{tabular} &
-%\bfseries \begin{tabular}{c}Incubation\\Time\end{tabular} &
-%\bfseries \begin{tabular}{c}Time\\to\\Growth\end{tabular}\\}{%
-% % Middle Rows
-%\label{exp:\insertbyname{Incubation Temperature}:\insertbyname{Incubation Time}}
-%\thecsvrownumber &
-%\insertbyname{Incubation Temperature} &
-%\insertbyname{Incubation Time} &
-%\insertbyname{Time to Growth} \\}{%
-% % Final Row
-%\label{exp:\insertbyname{Incubation Temperature}:\insertbyname{Incubation Time}}
-%\thecsvrownumber &
-%\insertbyname{Incubation Temperature} &
-%\insertbyname{Incubation Time} &
-%\insertbyname{Time to Growth}}
-%\par
-%\end{table}
-%
-%It can be seen from Table~\ref{tab:exp}, that
-%Experiment~\ref{exp:35:180} had the shortest time to growth.
-%\end{verbatim}
-% In this example, each experiment has the corresponding label
-% \texttt{exp:}\meta{Incubation Temperature}\texttt{:}\meta{Incubation Time}
-% so the first experiment has label \texttt{exp:40:120}, the
-% second experiment has the label \texttt{exp:40:90} and the
-% third experiment has the label \texttt{exp:35:180}.
-%
-% Table~\ref{tab:timetogrowth} shows the resulting table for
-% this example.
-% \begin{table}
-%\caption{Time to Growth Experiments}
-%\label{tab:timetogrowth}
-%\vspace{10pt}
-%\centering
-%\begin{tabular}{cccc}
-%\bfseries Experiment &
-%\bfseries \begin{tabular}{c}Incubation\\Temperature\end{tabular} &
-%\bfseries \begin{tabular}{c}Incubation\\Time\end{tabular} &
-%\bfseries \begin{tabular}{c}Time\\to\\Growth\end{tabular}\\
-% 1 & 40 & 120 & 40\\
-% 2 & 40 & 90 & 60\\
-% 3 & 35 & 180 & 20
-%\end{tabular}
-%\par
-% \end{table}
-%\end{example}
-%
-% The following example is more refined in that it
-% takes advantage of the fact that the time to growth data consists
-% of integers only, so the experiment with the maximum growth can be
-% determined by \LaTeX.
-%
-% \begin{example}{Labelling within \cmdname{CSVtotabular}}{ex:tablabel}
-%\begin{verbatim}
-%\newcounter{maxgrowth}
-%\newcounter{incT} % incubation temperature
-%\newcounter{inct} % incubation time
-%
-%\begin{table}
-%\caption{Time to Growth Experiments}
-%\label{tab:exp}
-%\vspace{10pt}
-%\centering
-%\CSVtotabular{data.csv}{cccc}{%
-% % Header row
-%\bfseries Experiment &
-%\bfseries \begin{tabular}{c}Incubation\\Temperature\end{tabular} &
-%\bfseries \begin{tabular}{c}Incubation\\Time\end{tabular} &
-%\bfseries \begin{tabular}{c}Time\\to\\Growth\end{tabular}\\}{%
-% % Middle rows
-%\label{exp:\insertbyname{Incubation Temperature}:\insertbyname{Incubation Time}}
-%\thecsvrownumber &
-%\insertbyname{Incubation Temperature} &
-%\insertbyname{Incubation Time} &
-%\insertbyname{Time to Growth}%
-%\ifthenelse{\value{maxgrowth}<\insertbyname{Time to Growth}}{%
-%\setcounter{maxgrowth}{\insertbyname{Time to Growth}}%
-%\setcounter{incT}{\insertbyname{Incubation Temperature}}%
-%\setcounter{inct}{\insertbyname{Incubation Time}}}{}%
-%\\}{%
-% % Last row
-%\label{exp:\insertbyname{Incubation Temperature}:\insertbyname{Incubation Time}}
-%\thecsvrownumber &
-%\insertbyname{Incubation Temperature} &
-%\insertbyname{Incubation Time} &
-%\insertbyname{Time to Growth}%
-%\ifthenelse{\value{maxgrowth}<\insertbyname{Time to Growth}}{%
-%\setcounter{maxgrowth}{\insertbyname{Time to Growth}}%
-%\setcounter{incT}{\insertbyname{Incubation Temperature}}%
-%\setcounter{inct}{\insertbyname{Incubation Time}}}{}%
-%}
-%\par
-%\end{table}
-%
-%As can be seen from Table~\ref{tab:exp},
-%Experiment~\ref{exp:\theincT:\theinct}
-%had the maximum time to growth, with
-%incubation time \theinct,
-%incubation temperature \theincT\ and
-%time to growth, \themaxgrowth.
-%\end{verbatim}
-% \end{example}
-%
-% \section{Saving Entries}
-% Entries can be saved using the command:\\[10pt]
-% \DescribeMacro{\csvSaveEntry}
-%\changes{1.22}{2007 January 3}{added final optional argument to 'csvSaveEntry}
-% \cmdname{csvSaveEntry}[\meta{counter}]\{\meta{identifier}\}[\meta{empty text}]\\[10pt]
-% where \meta{counter} is a \LaTeX\ counter, by default
-%\texttt{csvrownumber},
-% and \meta{identifier} is the header entry. The entry
-% can then be used with the command:\\[10pt]
-% \DescribeMacro{\csvGetEntry}
-% \cmdname{csvGetEntry}\{\meta{counter}\}\{\meta{identifier}\}\\[10pt]
-%The final optional argument \meta{empty text} to
-%\cmdname{csvSaveEntry} is the text to use if the entry is blank.
-%For example, \verb|\csvSaveEntry{Time}[MISSING DATA]| will
-%print MISSING DATA if the Time field is blank.
-%
-%The following example illustrates the use of these commands.
-%
-% \begin{example}{Saving Entries}{ex:index}
-% This example illustrates how you can use one CSV
-% file to access data in other CSV files.
-% This example has several CSV files:
-%\\[10pt]
-% File \texttt{index.csv}:
-%\begin{verbatim}
-%File,Temperature,NaCl,pH
-%exp25a.csv,25,4.7,0.5
-%exp25b.csv,25,4.8,1.5
-%exp30a.csv,30,5.12,4.5
-%\end{verbatim}
-% File \texttt{exp25a.csv}:
-%\begin{verbatim}
-%Time,Logcount
-%0,3.75
-%23,3.9
-%45,4.0
-%\end{verbatim}
-% File \texttt{exp25b.csv}:
-%\begin{verbatim}
-%Time,Logcount
-%0,3.6
-%60,3.8
-%120,4.0
-%\end{verbatim}
-% File \texttt{exp30a.csv}:
-%\begin{verbatim}
-%Time,Logcount
-%0,3.73
-%23,3.67
-%60,4.9
-%\end{verbatim}
-%
-% It is not possible to nest \cmdname{CSVtotabular},
-%\cmdname{CSVtolongtable} and \cmdname{applyCSVfile},
-% so if you need to go through \texttt{index.csv} and use each file
-% named in there, you can first go through \texttt{index.csv}
-%storing the information using \cmdname{csvSaveEntry} as follows:
-%\begin{verbatim}
-%\newcounter{maxexperiments}
-%\applyCSVfile{sample5.csv}{%
-%\stepcounter{maxexperiments}
-%\csvSaveEntry{File}
-%\csvSaveEntry{Temperature}
-%\csvSaveEntry{NaCl}
-%\csvSaveEntry{pH}
-%}
-%\end{verbatim}
-% The counter \texttt{maxexperiments} simply counts the number of
-% entries in \texttt{index.csv}.
-% The entries can now be used to generate a table for each
-% file listed in \texttt{index.csv} (the \cmdname{whiledo} command
-%is defined in the \stynamefmt{ifthen} package):
-%\begin{verbatim}
-%\newcounter{experiment}
-%\whiledo{\value{experiment}<\value{maxexperiments}}{%
-%\stepcounter{experiment}
-%\begin{table}
-%\caption{Temperature = \protect\csvGetEntry{experiment}{Temperature},
-%NaCl = \protect\csvGetEntry{experiment}{NaCl},
-%pH = \protect\csvGetEntry{experiment}{pH}}
-%\vspace{10pt}
-%\centering
-%\CSVtotabular{\csvGetEntry{experiment}{File}}{ll}{%
-%Time & Log Count\\}{%
-%\insertTime & \insertLogcount\\}{%
-%\insertTime & \insertLogcount}
-%
-%\end{table}
-%}
-%\end{verbatim}
-% Note that \cmdname{csvGetEntry} needs to be \cmdname{protect}ed
-%within the \cmdname{caption} command.
-%
-% This example can be modified if, say, you only want the
-% tables where the temperature is 25:
-%\begin{verbatim}
-%\setcounter{experiment}{0}
-%\whiledo{\value{experiment}<\value{maxexperiments}}{%
-%\stepcounter{experiment}
-%\ifthenelse{\equal{\csvGetEntry{experiment}{Temperature}}{25}}{%
-%\begin{table}
-%\caption{Temperature = \protect\csvGetEntry{experiment}{Temperature},
-%NaCl = \protect\csvGetEntry{experiment}{NaCl},
-%pH = \protect\csvGetEntry{experiment}{pH}}
-%\vspace{10pt}
-%\centering
-%\CSVtotabular{\csvGetEntry{experiment}{File}}{ll}{%
-%Time & Log Count\\}{%
-%\insertTime & \insertLogcount\\}{%
-%\insertTime & \insertLogcount}\par
-%\end{table}}{}
-%}
-%\end{verbatim}
-% \end{example}
-%
-%\section{Pie Charts (csvpie.sty)}
-%
-%\changes{1.2}{2006 Sept 1}{csvpie.sty added}
-%If you want to create a pie chart from data stored in a CSV file,
-%you can use the \stynamefmt{csvpie} package, distributed with the
-%\stynamefmt{csvtools} package. A basic pie chart can be created
-%using the command:\\[10pt]
-%\DescribeMacro{\csvpiechart}\noindent
-%\cmdname{csvpiechart}[\meta{options}]\{\meta{variable}\}\{\meta{filename}\}\\[10pt]
-%where \meta{filename} is the name of the CSV file containing the
-%data, and \meta{variable} is the command indicating the entry that
-%contains the value for the given segment.
-%The starred version of \cmdname{csvpiechart} should be used if
-%the CSV file has no header row.
-%
-%The pie charts have ``inner'' labels on the segment, and
-%``outer'' labels outside the chart. The labels are given by the
-%commands \DescribeMacro{\csvpieinnerlabel}\cmdname{csvpieinnerlabel}
-%and \DescribeMacro{\csvpieouterlabel}\cmdname{csvpieouterlabel}.
-%The default definitions are:
-%\begin{verbatim}
-%\newcommand{\csvpieouterlabel}{\field{1}}
-%\newcommand{\csvpieinnerlabel}{\field{2}\%}
-%\end{verbatim}
-%This assumes that the second column contains the data, and the
-%first column contains a description, but can be redefined
-%as necessary.
-%
-%The pie chart display can be modified using the optional
-%argument to \cmdname{csvpiechart}.
-%This argument should be a \meta{key}=\meta{value} list.
-%The available keys are as follows:
-%\begin{description}
-%\item[start] This should be an integer specifying the starting angle
-%of the first segment. This is 0 by default.
-%
-%\item[total] This should be an integer specifying the sum of all
-%the segment values. This is 100 by default.
-%
-%\item[radius] This should be a length specifying the radius of the
-%pie chart. (Default: 2cm)
-%
-%\item[inner] This should be a fraction specifying the relative distance
-%along the radius to start the inner label. (Default: 0.25)
-%
-%\item[outer] This should be a fraction specifying the relative distance
-%along the radius to start the outer label. (Default: 1.25)
-%
-%\item[cutaway] This should be a comma-separated list of numbers
-%corresponding to the segments that should be cut away from the
-%rest of the pie chart. Since the value may contain commas, the value
-%should always be enclosed in braces. Ranges may also be used.
-%If a range is used, all the segments in the given range are
-%kept together, so, for example, \verb"cutaway={1,2}" will separate
-%the first two segments from the pie chart, and the two segments
-%will also be separated from each other, whereas \verb"cutaway={1-2}"
-%will separate the first two segments from the pie chart, but will
-%keep the two segments together.
-%
-%\item[offset] This should be a fraction specifying the
-%relative distance along the radius to shift the cut away
-%segments. (Default: 0.1)
-%
-%\item[firstrow] This should be the number of the first row
-%containing the actual data. This is equivalent to the optional
-%argument of \cmdname{applyCSVfile} or \cmdname{applyCSVfile*}.
-%\end{description}
-%
-%Note that \TeX\ performs integer arithmetic. Although the CSV
-%file may contain decimal numbers, rounding will occur when
-%constructing the pie charts.
-%
-%The colours for the pie chart segments can be set using the
-%command\DescribeMacro{\csvpiesegmentcol}:\\[10pt]
-%\cmdname{csvpiesegmentcol}\{\meta{n}\}\{\meta{colour}\}\\[10pt]
-%where \meta{n} is the segment number, and \meta{colour} is a
-%defined colour name. For example, if you want the first segment
-%in the pie chart to be yellow, do:
-%\begin{verbatim}
-%\csvpiesegmentcol{1}{yellow}
-%\end{verbatim}
-%There are 8 predefined segment colours, if your pie chart has
-%more than 8 segments, you will need to specify the remainder.
-%
-%You can obtain the colour name for a given segment
-%using\DescribeMacro{\csvpiesegcolname}:\\[10pt]
-%\cmdname{csvpiesegcolname}\{\meta{n}\}\\[10pt]
-%where \meta{n} is the segment number. The \cmdname{csvpiechart}
-%command uses \cmdname{applyCSVfile}, so the \texttt{csvrownumber}
-%counter can be used. This means that you can change the text
-%colour of the outer label to match the segment. For example:
-%\begin{verbatim}
-%\renewcommand{\csvpieouterlabel}{%
-%\color{\csvpiesegcolname{\value{csvrownumber}}}\field{2}}
-%\end{verbatim}
-%Note that \cmdname{value} must be used since \meta{n} has to be
-%a number.
-%
-%If you want grey pie charts, either use the \texttt{monochrome}
-%package option:
-%\begin{verbatim}
-%\usepackage[monochrome]{csvpie}
-%\end{verbatim}
-%or use the command \DescribeMacro{\colorpiechartfalse}\cmdname{colorpiechartfalse} prior to using \cmdname{csvpiechart}.
-%To switch back to colour pie charts, use
-%\DescribeMacro{\colorpiecharttrue}\cmdname{colorpiecharttrue}.
-%
-%\begin{example}{A Pie Chart}{ex:piechart}
-%Given a CSV file
-%(called \texttt{fruit.csv}) containing:
-%\begin{verbatim}
-%Name,Value
-%Apples,20
-%Pears,15
-%"lemons,limes",30.5
-%Peaches,24.5
-%Cherries,10
-%\end{verbatim}
-%Then the value for each segment is given by the second column, so
-%\meta{variable} should be \verb"\field{2}" or \verb|\insertValue|.
-%The pie charts shown in Figure~\ref{fig:piechart} can be created
-%using:
-%\begin{verbatim}
-% % Change the way the labels are displayed
-%\renewcommand{\csvpieinnerlabel}{\sffamily\insertValue\%}
-%\renewcommand{\csvpieoutlabel}{%
-%\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily\insertName}
-%
-%\begin{figure}
-%\begin{center}
-%\begin{tabular}{cc}
-%\csvpiechart[start=45,cutaway={1,2}]{\insertValue}{fruit.csv} &
-%\csvpiechart[start=45,cutaway={1-2}]{\insertValue}{fruit.csv} \\
-%(a) & (b)
-%\end{tabular}
-%\end{center}
-%\caption{Pie Chart Example (a) cutaway=\{1,2\} (b) cutaway=\{1-2\}}
-%\end{figure}
-%\end{verbatim}
-%The inner and outer labels have been
-%redefined to use a sans-serif font, and the outer label is in
-%the same colour as its corresponding segment.
-%Both pie charts have a starting angle of $45^\circ$, and theyhave the first two segments cutaway, but in (a)
-%the first two segments are separated from each other, whereas in
-%(b), the first two segments are joined, although separated
-%from the rest of the pie chart.
-%
-%If the CSV file has no header row, the starred version should be
-%used, e.g.:
-%\begin{verbatim}
-%\csvpiechart*[cutaway={1-2}]{\field{2}}{fruit.csv}
-%\end{verbatim}
-%
-%\begin{figure}[htbp]
-%\begin{center}
-%\begin{tabular}{cc}
-%\csvpiesetkeys{start=45,cutaway={1,2}}%
-%\edef\csvstartang{\thecsvstartangle}\relax
-%\setcounter{csvrownumber}{0}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{20}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{15}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{30.5}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{24.5}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{10}\relax
-%\setcounter{csvstartangle}{\csvstartang}\relax
-%\ifthenelse{\equal{\csvpiecutaways}{}}{}{\csvcomputeoffsets}\relax
-%\begin{tikzpicture}
-%\setcounter{csvrownumber}{0}\relax
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily20\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Apples}
-%\csvpiesegment{20}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily15\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Pears}
-%\csvpiesegment{15}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily30.5\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%lemons,limes}
-%\csvpiesegment{30.5}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily24.5\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Peaches}
-%\csvpiesegment{24.5}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily10\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Cherries}
-%\csvpiesegment{10}
-%\end{tikzpicture}
-% &
-%\csvpiesetkeys{start=45,cutaway={1-2}}%
-%\edef\csvstartang{\thecsvstartangle}\relax
-%\setcounter{csvrownumber}{0}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{20}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{15}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{30.5}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{24.5}\relax
-%\stepcounter{csvrownumber}\relax
-%\csvsetsegmentparams{\thecsvrownumber}{10}\relax
-%\setcounter{csvstartangle}{\csvstartang}\relax
-%\ifthenelse{\equal{\csvpiecutaways}{}}{}{\csvcomputeoffsets}\relax
-%\begin{tikzpicture}
-%\setcounter{csvrownumber}{0}\relax
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily20\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Apples}
-%\csvpiesegment{20}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily15\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Pears}
-%\csvpiesegment{15}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily30.5\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%lemons,limes}
-%\csvpiesegment{30.5}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily24.5\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Peaches}
-%\csvpiesegment{24.5}
-%\stepcounter{csvrownumber}\relax
-%\renewcommand*{\csvpieinnerlabel}{\sffamily10\%}
-%\renewcommand*{\csvpieouterlabel}{\color{\csvpiesegcolname{\value{csvrownumber}}}\sffamily
-%Cherries}
-%\csvpiesegment{10}
-%\end{tikzpicture}
-% \\
-%(a) & (b)
-%\end{tabular}
-%\end{center}
-%\caption{Pie Chart Example (a) cutaway=\{1,2\}
-%(b) cutaway=\{1-2\}}
-%\label{fig:piechart}
-%\end{figure}
-%\end{example}
-%
-%\section{Sorting Data (csvsort.sty)}
-%
-%The \stynamefmt{csvsort} package (which forms part of the
-%\stynamefmt{csvtools} bundle) provides analogous commands to
-%those provided by \stynamefmt{csvtools}, but the data is first
-%sorted. The \stynamefmt{csvsort} package needs to be loaded
-%separately in order to access the necessary commands. The package
-%options should be a list of key=value pairs, where the available
-%keys are:
-%\begin{description}
-%\item[verbose] Verbose mode. This is a boolean key. If set, the
-%comparisons performed by the insertion sort code are printed to
-%the screen. (Default: \texttt{verbose=true}.)
-%
-%\item[sort] This key specifies how to sort the data. It may take
-%one of the following values:
-%\begin{itemize}
-%\item \texttt{alphabetical ascending} (or just \texttt{alphabetical})
-%\item \texttt{alphabetical descending}
-%\item \texttt{numerical ascending} (or just \texttt{numerical})
-%\item \texttt{numerical descending}
-%\end{itemize}
-%(Default: \texttt{sort=alphabetical ascending})
-%
-%\item[variable] The sort variable. (Default: \verb|sort=\field{1}|)
-%
-%\item[sfirstdataline] The line on which the data starts in a data
-%file without a header row. (Default: \texttt{sfirstdataline=1}.)
-%
-%\item[firstdataline] The line on which the data starts in a data
-%file with a header row. (Default: \texttt{firstdataline=2}.)
-%\end{description}
-%
-%Note that the \stynamefmt{csvsort} package requires
-%the \stynamefmt{xfor} package and \'Eamonn McManus'
-%\texttt{compare.tex} file. The \stynamefmt{csvsort} package uses
-%an insertion sort method to sort the data, so large amounts of data
-%may slow processing time. The following commands are provided
-%by \stynamefmt{csvsort}:
-%
-%\DescribeMacro{\sortapplyCSVfile}\noindent
-% \cmdname{sortapplyCSVfile}\oarg{options}\marg{filename}\marg{text}\par
-% \cmdname{sortapplyCSVfile*}\oarg{options}\marg{filename}\marg{text}\\[10pt]
-%These commands are analogous to \cmdname{applyCSVfile} and
-%\cmdname{applyCSVfile*}, except that the data is first sorted.
-%The optional argument is a key=value list. The keys are the same
-%as those used in the package options, described above. These options
-%only apply to the given instance of the command, whereas the
-%package options apply to all \stynamefmt{csvsort} commands, unless
-%overridden in \meta{options}. Example, suppose you have a file
-%called \texttt{unsorted.csv} which looks like:
-%\begin{verbatim}
-%First Name,Surname,Age
-%Zephram,Lang,60
-%Fred,Lang,10
-%Barney,Langley,25
-%Jane,Brown,5
-%Adam,Smith,24
-%Bert,Jones,18
-%\end{verbatim}
-%Then
-%\begin{verbatim}
-%\sortapplyCSVfile[sort=alphabetical,variable=\insertSurname]{unsorted.csv}{%
-%\insertSurname, \insertbyname{First Name}. Age: \insertAge\par}
-%\end{verbatim}
-%will produce the following output:\par
-%Brown, Jane. Age:5\par
-%Jones, Bart. Age:18\par
-%Lang, Zephram. Age:60\par
-%Lang, Fred. Age:10\par
-%Langley, Barney. Age:25\par
-%Smith, Adam. Age: 24\par
-%Note that the data has only been sorted according to the surname.
-%To sort first by surname, then by first name, you can
-%do something like:
-%\begin{verbatim}
-%\sortapplyCSVfile[sort=alphabetical,
-%variable={\insertSurname,\insertbyname{First Name}}]{unsorted.csv}{%
-%\insertSurname, \insertbyname{First Name}. Age: \insertAge\par}
-%\end{verbatim}
-%As with \cmdname{applyCSVfile}, you must use \cmdname{field} if
-%you use the starred version:
-%\begin{verbatim}
-%\sortapplyCSVfile*[sort=alphabetical,
-%variable={\field{2},\field{1}}]{unsorted.csv}{%
-%\field{2}, \field{1}. Age: \field{3}\par}
-%\end{verbatim}
-%
-%The commands:\\[10pt]\DescribeMacro{\sortCSVtotabular}
-%\cmdname{sortCSVtotabular}\oarg{options}\marg{filename}\marg{col-spec}\marg{first row}\marg{all but last row}\marg{last row}\\
-%\DescribeMacro{\sortCSVtolongtable}
-%\cmdname{sortCSVtolongtable}\oarg{options}\marg{filename}\marg{col-spec}\marg{first row}\marg{all but last row}\marg{last row}\\
-%Are analogous to \cmdname{CSVtotabular} and \cmdname{CSVtolongtable},
-%where, again, \meta{options} is a list of key=value pairs, the same
-%as \cmdname{sortapplyCSVfile}. Using the same example data as above,
-%the following command will sort the data according to age (in
-%numerical order) and place in a tabular environment:
-%\begin{verbatim}
-%\sortCSVtotabular[sort=numerical,variable=\insertAge]{unsorted.csv}{llr}{%
-%\bfseries Surname & \bfseries First Name & \bfseries Age\\}{%
-%\insertSurname & \insertbyname{First Name} & \insertAge\\}{%
-%\insertSurname & \insertbyname{First Name} & \insertAge}
-%\end{verbatim}
-%
-%Note that the counter \texttt{csvlinenum} has no meaning in the
-%commands provided by the \stynamefmt{csvsort} package. The
-%\texttt{csvrownumber} counter corresponds to the sorted data row.
-%
-%\section{The csvtools.pl Perl Script}
-%
-% Suppose you have several large CSV files, and you have included
-%the information into your document using \cmdname{applyCSVfile},
-%\cmdname{CSVtolongtable}, \cmdname{CSVtotabular} or
-%\cmdname{csvpiechart}, which has
-%made life so much easier for you, but you are now required by a
-%journal to submit your source code in a single \texttt{.tex} file.
-% They don't want all your CSV files, so what do you do? If you
-%have Perl installed on your system you can use the
-%\texttt{csvtools.pl} Perl script. This has the following syntax:\\[5pt]
-% \texttt{csvtools.pl} \meta{in-file} \meta{out-file}\\[5pt]
-% where \meta{in-file} is the name of your file that contains the
-%\cmdname{applyCSVfile}, \cmdname{CSVtotabular} etc
-% commands, and \meta{out-file} is a new file which will be created by \texttt{csvtools.pl}. This new
-% file will be the same as \meta{in-file} except that all
-%occurances of \cmdname{applyCSVfile}, \cmdname{CSVtolongtable},
-%\cmdname{CSVtotabular} and \cmdname{csvpiechart} will be replaced
-%by the relevant data extracted from the named CSV files.
-%
-%\begin{example}{csvtools.pl --- Aligning Data}{ex:perl}
-% Suppose the file \texttt{mydoc.tex} contains the code given in
-%Example~\ref{ex:tab1}, with the associated CSV file
-%\texttt{sample.csv} also given in that example. Then if you do:
-%\begin{verbatim}
-%csvtools.pl mydoc.tex mydocnew.tex
-%\end{verbatim}
-%the file \texttt{mydocnew.tex} will be created which will be
-%identical to \texttt{mydoc.tex} except the lines
-% containing the code \verb'\CSVtotabular{sample.csv}{lccc}{'\ldots\verb/}{/\dots\verb!}{!\ldots\verb+}+ will be replaced
-%with the lines:
-%\begin{verbatim}
-% % \CSVtotabular{sample.csv}... converted using csvtools.pl
-% %>> START INSERT
-% \begin{tabular}{lccc}
-% \bfseries Name &
-% \bfseries Assignment 1 &
-% \bfseries Assignment 2 &
-% \bfseries Total\\
-% A. Smith&80&70&150\\
-% B. Jones&60&80&140\\
-% J. Doe&85&75&160\\
-% &75&75&150
-% \end{tabular}%<< END INSERT
-%\end{verbatim}
-%\end{example}
-%
-%Similarly, \texttt{csvtools.pl} will substitute all occurrances
-%of \cmdname{CSVtolongtable}, \cmdname{applyCSVfile}
-%and \cmdname{csvpiechart}.
-%
-%\subsection{Notes}
-%\begin{enumerate}
-%\item If perl is located in a directory other than \texttt{/usr/bin/}
-%you will need to edit the first line of \texttt{csvtools.pl} as
-%appropriate. You can find the location using the command:
-%\begin{verbatim}
-%which perl
-%\end{verbatim}
-%
-%\item If you can't directly execute a Perl script,
-% you can do:\\[5pt]
-% \texttt{perl csvtools.pl} \meta{in-file} \meta{out-file}
-%
-%\item You must first \LaTeX\ your document before using
-%\texttt{csvtools.pl} as it checks the log file for any counters
-%that have been defined.
-%
-%\item \texttt{csvtools.pl} only knows about a very limited set
-%of \LaTeX\ commands. It should be able to understand:
-%\begin{verbatim}
-%\CSVtotabular{\csvGetEntry{experiment}{File}}{ll}{...
-%\end{verbatim}
-%(see Example~\ref{ex:index}), but it won't be able to understand,
-%say,
-%\begin{verbatim}
-%\newcommand{\filename}{\csvGetEntry{experiment}{File}}
-%\CSVtotabular{\filename}{ll}{...
-%\end{verbatim}
-%It can pick up on \cmdname{addtocounter}, \cmdname{stepcounter},
-%\cmdname{refstepcounter} and \cmdname{setcounter} but only if
-%they are used explicitly in the named \texttt{.tex} file. (It
-%ignores any files that have been included using
-%\cmdname{input}, \cmdname{include} etc.)
-%
-%\item This Perl script has only been tested under Linux, but it
-%ought to work under other systems.
-%\end{enumerate}
-%
-% \section{Bugs/Drawbacks/``Features''}\label{sec:drawbacks}
-% \begin{enumerate}
-% \item\label{itm:insert}
-% The package doesn't check to see whether
-%\cmdname{insert}\meta{identifier} exists, otherwise you would not
-%be able to use multiple CSV files with the same headers, as in
-%Example~\ref{ex:index}. Therefore it is recommended that
-% you check to make sure that the command does not already exist.
-% For example, the \TeX\ commands \cmdname{insert} and
-%\cmdname{insertpenalties} already exist, so a blank header or a
-%header named \texttt{penalties} would cause problems. (These two
-%will now cause an error as from version 1.1, but it's something
-%bear in mind.)
-%
-% \item Note also that \cmdname{insertbyname} doesn't check
-% if you've given a valid label, so if no text appears,
-% check you've spelt it correctly, checking punctuation, spaces and case.
-%
-% \item\label{itm:psbyname}
-% Note that in Example~\ref{ex:ps}, replacing line~3 with:
-%\begin{verbatim}
-%\centerline{\includegraphics{\insertbyname{File}}}
-%\end{verbatim}
-% will cause an error, as \verb/\insertbyname{File}/ doesn't get
-% fully expanded by the time it gets passed to
-% \cmdname{includegraphics}, and will prevent
-%\cmdname{includegraphics} from
-% finding the file. It is possible to get around this using
-% \TeX's \cmdname{edef} command:
-%\begin{verbatim}
-%\edef\psfilename{\insertbyname{File}}
-%\centerline{\includegraphics{\psfilename}}
-%\end{verbatim}
-%
-% \item\label{itm:noalign} You can't have commands like
-%\cmdname{hline}, \cmdname{cline} and \cmdname{multicolumn} in the
-%first column of the \meta{middle} or \meta{last} code of
-%\cmdname{CSVtotabular} or \cmdname{CSVtolongtable}. If you do,
-%it will generate a \verb/misplaced \noalign/ error, instead you
-%need to put it at the end of the \meta{first} or \meta{middle}
-%code. (See Example~\ref{ex:tab3}.)
-%
-% \item You can't have nested \cmdname{applyCSVfile},
-%\cmdname{CSVtolongtable} and \cmdname{CSVtotabular}
-% commands. Nor can you have \cmdname{csvpiechart} within
-%one of these commands (See Example~\ref{ex:index})
-%
-% \item If the CSV file has a header row, it must be on the first
-%line.
-%
-% \item It is possible for \TeX\ to run out of memory if you use
-% \cmdname{csvSaveEntry} on a large file.
-%
-% \item\label{itm:csvrownumber} In version 1.0, there was an
-%inconsistency with \texttt{csvrownumber} within
-%\cmdname{applyCSVfile} and \cmdname{CSVtotabular}. In the
-%former it excluded the header row, whereas the latter
-%included it. This has been changed in version 1.1 so that within
-%\cmdname{applyCSVfile}, \cmdname{CSVtotabular} and
-%\cmdname{CSVtolongtable}, \texttt{csvrownumber} refers to the
-%data row (excluding header row.) I hope this doesn't cause
-%problems, but it makes more sense that they should be
-%consistent. So if you have no blank lines in your CSV file,
-%\texttt{csvrownumber} should always be 1 more than
-%\texttt{csvlinenumber}.
-%
-%\end{enumerate}
-%
-% \section{Contact Details}
-%
-% Dr Nicola Talbot\\
-% School of Computing Sciences\\
-% University of East Anglia\\
-% Norwich. NR4 7TJ. England.
-% \\[10pt]
-% \url{http://theoval.cmp.uea.ac.uk/~nlct/}
-%
-%\StopEventually{\PrintIndex\addcontentsline{toc}{section}{Index}}
-%
-%
-%
-%\section{The Code}
-%\iffalse
-% \begin{macrocode}
-%<*csvtools.sty>
-% \end{macrocode}
-%\fi
-%\subsection{csvtools.sty}
-% Declare package
-% \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{csvtools}[2007/07/03 v1.24 (NLCT)]
-% \end{macrocode}
-% Required packages
-% \begin{macrocode}
-\RequirePackage{ifthen}
-\RequirePackage{longtable}
-% \end{macrocode}
-% Define command to set the separator character.
-% \begin{macrocode}
-\newcommand*{\@csvseparator}{,}
-\newcommand*{\setcsvseparator}[1]{%
-\renewcommand*{\@csvseparator}{#1}%
-\construct@lopoff{#1}%
-\@construct@qlopoff{#1}%
-\@construct@lopoff{#1}}
-% \end{macrocode}
-% Define command to remove first element from list. CSV files
-% usually use double quote characters to enclose entries containing
-% a comma. The first argument is the control sequence containing
-% the list, the second argument is the control sequence to
-% contain the first item in the list.
-% \begin{macrocode}
-\newcommand*{\extractentry}[2]{%
-\expandafter\csvlopoff#1\to{#1}{#2}}
-% \end{macrocode}
-% The definitions are constructed on the fly to allow for
-% different separators. The argument is the separator.
-%\changes{1.23}{2007 May 23}{'csvlopoff changed to a long command}
-% \begin{macrocode}
-\edef\construct@lopoff#1{%
-\noexpand\long\noexpand\def\noexpand\csvlopoff#1##1##2\noexpand\to##3##4{%
-\noexpand\ifx"##1\noexpand\relax
-\noexpand\@csv@qlopoff#1##1##2\noexpand\to##3##4\relax
-\noexpand\else
-\noexpand\@csv@lopoff#1##1##2\noexpand\to##3##4\relax
-\noexpand\fi
-}}
-% \end{macrocode}
-% Command to contruct control sequence to be used when the
-% entry is surrounded by double quotes.
-%\changes{1.23}{2007 May 23}{'@csv@qlopoff changed to a long command}
-% \begin{macrocode}
-\edef\@construct@qlopoff#1{%
-\noexpand\long\noexpand\def\noexpand\@csv@qlopoff#1"##1"#1##2\noexpand\to##3##4{%
-\noexpand\def##4{##1}\noexpand\def##3{#1##2}}}
-% \end{macrocode}
-% Command to construct control sequence to be used when the
-% entry isn't surrounded by double quotes.
-%\changes{1.23}{2007 May 23}{'@csv@lopoff changed to a long command}
-% \begin{macrocode}
-\edef\@construct@lopoff#1{%
-\noexpand\long\noexpand\def\noexpand\@csv@lopoff#1##1#1##2\noexpand\to##3##4{%
-\noexpand\def##4{##1}\noexpand\def##3{#1##2}}}
-% \end{macrocode}
-% Set the default separator:
-% \begin{macrocode}
-\setcsvseparator{,}
-% \end{macrocode}
-% Define some variables
-% \begin{macrocode}
-\newread\csvfile
-\newif\ifmore
-\newcount\c@field
-\newcount\c@maxfields
-\newcounter{csvlinenum}
-\newcount\maxlines
-\newcount\csvlastbutone
-\newcounter{csvrownumber}
-\toksdef\csv@tb=2
-% \end{macrocode}
-% Define commands to access element in current row.
-% Access element by column number:
-% \begin{macrocode}
-\newcommand{\field}[1]{\csname @field\romannumeral#1\endcsname}
-% \end{macrocode}
-% Set field (header) label, the first argument is the index, second argument is the header for that column.)
-% \begin{macrocode}
-\newcommand{\setcsvfieldlabel}[2]{%
-\expandafter\def\csname @fieldlabel\romannumeral#1\endcsname{#2}}
-% \end{macrocode}
-% Access element by header:
-% \begin{macrocode}
-\newcommand{\insertbyname}[1]{\csname insert#1\endcsname}
-% \end{macrocode}
-% Define command to trim trailing space (caused by EOL) in argument.
-% Argument should be a command name containing the current line.
-% \begin{macrocode}
-\newcommand{\trim}[1]{\def\@trmstr{}%
-\def\csv@trmarg{#1}%
-\if\par\csv@trmarg
-\else
-\expandafter\@trim#1\end
-\let#1\@trmstr
-\fi
-}
-\long\def\@trim#1 \end{\def\@trmstr{#1}}
-% \end{macrocode}
-% Define "\applyCSVfile"
-% \begin{macrocode}
-\newcommand{\applyCSVfile}{\@ifstar\@sapplyCSVfile\@applyCSVfile}
-% \end{macrocode}
-% Starred version of "\applyCSVfile":
-% \begin{macrocode}
-\newcommand{\@sapplyCSVfile}[3][1]{%
-\IfFileExists{#2}{%
-\openin\csvfile=#2
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-{\c@csvlinenum=1\relax
-\global\c@csvrownumber=0\relax
-\loop
-\read\csvfile to\csvline
-\advance\c@csvlinenum by 1\relax
-\ifnum\c@csvlinenum>#1\relax
-\trim{\csvline}%
-\csv@tb=\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field = 0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator} \and
-\not\equal{\@csvlin@}{\@csvseparator\@csvseparator} \and
-\not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter\xdef\csname @field\romannumeral\c@field\endcsname{%
-\the\csv@tb}%
-}%
-\ifthenelse{\not\equal{\csvline}{\par} \and
-\not\equal{\csvline}{}}{%
-\refstepcounter{csvrownumber}\relax
-#3}{}%
-\fi
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-\repeat}%
-\closein\csvfile
-\fi
-}{\PackageError{csvtools}{Can't find file '#2'}{}}%
-}
-% \end{macrocode}
-% Unstarred version:
-% \begin{macrocode}
-\newcommand{\@applyCSVfile}[3][2]{%
-\ifnum#1<2\relax
-\PackageError{csvtools}{Header line required}{The optional
-argument to `\string\applyCSVfile' needs to be > 1. The header
-line should be on line 1}%
-\else
-\IfFileExists{#2}{%
-\openin\csvfile=#2
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-\global\c@csvlinenum=1\relax
-\global\c@csvrownumber=0\relax
-\global\c@maxfields=0\relax
-{\loop
-\read\csvfile to\csvline
-\trim{\csvline}%
-\ifnum\c@csvlinenum=1\relax
-\ifthenelse{\not\equal{\csvline}{\par} \and
-\not\equal{\csvline}{}}{%
-\csv@tb=\expandafter{\csvline}\relax
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field=0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\advance\c@field by 1\relax
-\csv@tb=\expandafter{\param}\relax
-\expandafter
-\xdef\csname @fieldlabel\romannumeral\c@field\endcsname{\the\csv@tb}%
-}%
-\c@maxfields=\c@field
-}{%
-\PackageError{csvtools}{Header line missing in file #2}{Header
-line required on line 1}}%
-\fi
-\c@field=0\relax
-\whiledo{\c@field < \c@maxfields}{%
-\advance\c@field by 1\relax
-\expandafter\let\csname @field\romannumeral\c@field\endcsname\relax%
-\edef\@fieldlabel{%
-\csname @fieldlabel\romannumeral\c@field\endcsname}%
-\ifthenelse{\equal{\@fieldlabel}{}
-\TE@or \equal{\@fieldlabel}{penalties}
-\TE@or \equal{\@fieldlabel}{byname}}{\PackageError{csvtools}{%
-\string\insert\@fieldlabel \space already defined}{%
-You can't have the label '\@fieldlabel' in your header row.}}{}%
-\expandafter\let\csname insert\@fieldlabel\endcsname\relax%
-}%
-\advance\c@csvlinenum by 1\relax
-\ifnum\c@csvlinenum>#1\relax
-\csv@tb=\expandafter{\csvline}\relax
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field=0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}\relax
-\advance\c@field by 1\relax
-\expandafter
-\xdef\csname @field\romannumeral\c@field\endcsname{\the\csv@tb}%
-\edef\@fieldlabel{%
-\csname @fieldlabel\romannumeral\c@field\endcsname}%
-\ifthenelse{\equal{\@fieldlabel}{}
-\TE@or \equal{\@fieldlabel}{penalties}
-\TE@or \equal{\@fieldlabel}{byname}}{\PackageError{csvtools}{%
-\string\insert\@fieldlabel \space already defined}{%
-You can't have the label '\@fieldlabel' in your header row.}}{}%
-\expandafter\xdef\csname insert\@fieldlabel\endcsname{\the\csv@tb}%
-}%
-\ifthenelse{\not\equal{\csvline}{\par}
-\and \not\equal{\csvline}{}}{%
-\global\advance\c@csvrownumber by 1\relax
-#3}{}%
-\fi
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-\repeat}%
-\closein\csvfile
-\fi
-}{\PackageError{csvtools}{Can't find file '#2'}{}}%
-\fi
-}
-% \end{macrocode}
-% Define "\CSVtotabular". Inserts contents of csv file into a tabular
-% environment.
-% \begin{macrocode}
-\newcommand{\CSVtotabular}[5]{%
-\openin\csvfile=#1
-\c@csvlinenum=0\relax
-\loop
-\advance\c@csvlinenum by 1\relax
-\read\csvfile to\csvline
-\expandafter
-\xdef\csname @csvline\romannumeral\c@csvlinenum\endcsname{\csvline}%
-\ifthenelse{\not\equal{\csvline}{\par}}{\trim{\csvline}}{}%
-\ifnum\c@csvlinenum=1\relax
-\csv@tb=\expandafter{\csvline}
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field = 0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}%
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}%
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter\xdef\csname insert\the\csv@tb\endcsname{%
-\noexpand\field{\the\c@field}}%
-}%
-\fi
-\csv@tb=\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field = 0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}
-\advance\c@field by 1\relax
-\expandafter
-\xdef\csname @l\romannumeral\c@csvlinenum @field\romannumeral\c@field\endcsname{\the\csv@tb}%
-}%
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-\repeat
-\closein\csvfile
-{%
-\def\field##1{%
-\csname @l\romannumeral\c@csvlinenum @field\romannumeral##1\endcsname}%
-\def\@r@wh{\begin{tabular}{#2}#3}%
-\def\@r@w{#4}%
-\def\@r@wl{#5\end{tabular}}%
-\maxlines=\c@csvlinenum
-\advance\maxlines by -1\relax
-\csvlastbutone=\maxlines
-\advance\csvlastbutone by -1\relax
-\c@csvlinenum=1\relax
-\setcounter{csvrownumber}{0}\relax
-\whiledo{\not{\c@csvlinenum>\maxlines}}{%
-\ifthenelse{\expandafter\equal{%
-\csname @csvline\romannumeral\c@csvlinenum\endcsname}{\par}}%
-{\relax}{%
-\ifnum\c@csvlinenum=1\relax
-\@r@wh
-\else
-\refstepcounter{csvrownumber}%
-\ifnum\c@csvlinenum=\maxlines\@r@wl\else\@r@w\fi
-\fi}%
-\global\advance\c@csvlinenum by 1\relax
-}\relax
-}}
-% \end{macrocode}
-% Define "\CSVtolongtable". Similar to the above, but uses a
-% longtable environment.
-% \begin{macrocode}
-\newcommand{\CSVtolongtable}[5]{%
-\openin\csvfile=#1
-\c@csvlinenum=0\relax
-\loop
-\advance\c@csvlinenum by 1\relax
-\read\csvfile to\csvline
-\expandafter
-\xdef\csname @csvline\romannumeral\c@csvlinenum\endcsname{\csvline}%
-\ifthenelse{\not\equal{\csvline}{\par}}{\trim{\csvline}}{}%
-\ifnum\c@csvlinenum=1\relax
-\csv@tb=\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field = 0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter
-\xdef\csname insert\the\csv@tb\endcsname{%
-\noexpand\field{\the\c@field}}%
-}%
-\fi
-\csv@tb=\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\csv@tb\@csvseparator}%
-\c@field = 0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator\par\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator\@csvseparator}
-\and \not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\csv@tb=\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter
-\xdef\csname @l\romannumeral\c@csvlinenum @field\romannumeral\c@field\endcsname{\the\csv@tb}%
-}%
-\ifeof\csvfile\morefalse\else\moretrue\fi
-\ifmore
-\repeat
-\closein\csvfile
-{\def\field##1{%
-\csname @l\romannumeral\c@csvlinenum @field\romannumeral##1\endcsname}%
-\def\@r@wh{\begin{longtable}{#2}#3}%
-\def\@r@w{#4}%
-\def\@r@wl{#5\end{longtable}}%
-\maxlines=\c@csvlinenum
-\advance\maxlines by -1\relax
-\csvlastbutone=\maxlines
-\advance\csvlastbutone by -1\relax
-\c@csvlinenum=1\relax
-\setcounter{csvrownumber}{0}\relax
-\whiledo{\not{\c@csvlinenum>\maxlines}}{%
-\ifthenelse{\expandafter\equal{%
-\csname @csvline\romannumeral\c@csvlinenum\endcsname}{\par}}%
-{\relax}{%
-\ifnum\c@csvlinenum=1\relax
-\@r@wh
-\else
-\refstepcounter{csvrownumber}%
-\ifnum\c@csvlinenum=\maxlines\@r@wl\else\@r@w\fi
-\fi}%
-\global\advance\c@csvlinenum by 1\relax
-}\relax
-}}
-% \end{macrocode}
-% Define a command to determine if on the penultimate row
-% \begin{macrocode}
-\newcommand{\ifnextrowlast}[2]{%
-\ifnum\c@csvlinenum=\csvlastbutone#1\else#2\fi}
-% \end{macrocode}
-% Define means to store entry for later use
-% \begin{macrocode}
-\newcommand{\csvSaveEntry}[2][csvrownumber]{%
-\@ifnextchar[{\@csvSaveEntry{#1}{#2}}{%
-\@csvSaveEntry{#1}{#2}[\insertbyname{#2}]}%
-}
-% \end{macrocode}
-% \begin{macrocode}
-\def\@csvSaveEntry#1#2[#3]{%
-\edef\@csv@tmp{\insertbyname{#2}}%
-\if\relax\@csv@tmp\relax
-\edef\@entry{#3}%
-\else
-\edef\@entry{\insertbyname{#2}}%
-\fi
-\expandafter
-\xdef\csname #2\romannumeral\value{#1}\endcsname{\@entry}}
-% \end{macrocode}
-% Define means to access stored entry.
-% \begin{macrocode}
-\newcommand{\csvGetEntry}[2]{%
-\csname #2\romannumeral\value{#1}\endcsname}
-% \end{macrocode}
-%\iffalse
-% \begin{macrocode}
-%</csvtools.sty>
-% \end{macrocode}
-%\fi
-%\iffalse
-% \begin{macrocode}
-%<*csvpie.sty>
-% \end{macrocode}
-%\fi
-%\subsection{csvpie.sty}
-% Declare package.
-% \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{csvpie}[2006/09/01 v1.0]
-% \end{macrocode}
-% Declare options.
-% \begin{macrocode}
-\newif\ifcolorpiechart
-\colorpiecharttrue
-\DeclareOption{color}{\colorpiecharttrue}
-\DeclareOption{monochrome}{\colorpiechartfalse}
-% \end{macrocode}
-% Process options
-% \begin{macrocode}
-\ProcessOptions
-% \end{macrocode}
-% Specify required packages
-% \begin{macrocode}
-\RequirePackage{csvtools}
-\RequirePackage{tikz}
-\RequirePackage{calc}
-\RequirePackage{keyval}
-% \end{macrocode}
-% Define some variables
-% \begin{macrocode}
-\newlength\csvradius
-\newlength\csvinner
-\newlength\csvouter
-\newlength\csvcutawayoffset
-\newcounter{csvstartangle}
-\newcounter{csvendangle}
-\newcounter{csvangle}
-\newcounter{csvpietotal}
-% \end{macrocode}
-% Set default values.
-% \begin{macrocode}
-\newcommand*{\csvpiedefaults}{radius=2cm,inner=0.25,outer=1.25,%
-cutaway={},total=100,start=0,offset=0.1}
-% \end{macrocode}
-% Define command to specify inner and outer labels.
-% The default puts the entry in column 1 (usually the label)
-% in the outer area, and the entry in column 2 (usually the
-% value) in the inner area. These can be redefined by the user
-% to use other variables, or change the format etc.
-% \begin{macrocode}
-\newcommand{\csvpieouterlabel}{\field{1}}
-\newcommand{\csvpieinnerlabel}{\field{2}\%}
-% \end{macrocode}
-% Define command to store list of row numbers corresponding to
-% cut away segments. (Segments that have been offset from the
-% pie chart.) By default, none of the segments should be cut away.
-% \begin{macrocode}
-\newcommand*{\csvpiecutaways}{}
-% \end{macrocode}
-% Define a command to assign colour name "#2" to segment number "#1"
-% \begin{macrocode}
-\newcommand*{\csvpiesegmentcol}[2]{%
-\expandafter\def\csname csvpie@segcol\romannumeral#1\endcsname{#2}}
-% \end{macrocode}
-% Define command to get colour name assigned to segment number "#1"
-% \begin{macrocode}
-\newcommand*{\csvpiesegcolname}[1]{%
-\csname csvpie@segcol\romannumeral#1\endcsname}
-% \end{macrocode}
-% Set default colours. These can be changed by the user. More colours
-% can be added in a similar manner if there are more than 8 segments.
-% \begin{macrocode}
-\ifcolorpiechart
-\csvpiesegmentcol{1}{red}
-\csvpiesegmentcol{2}{green}
-\csvpiesegmentcol{3}{blue}
-\csvpiesegmentcol{4}{yellow}
-\csvpiesegmentcol{5}{magenta}
-\csvpiesegmentcol{6}{cyan}
-\csvpiesegmentcol{7}{orange}
-\csvpiesegmentcol{8}{white}
-\else
-\csvpiesegmentcol{1}{black!15}
-\csvpiesegmentcol{2}{black!25}
-\csvpiesegmentcol{3}{black!35}
-\csvpiesegmentcol{4}{black!45}
-\csvpiesegmentcol{5}{black!55}
-\csvpiesegmentcol{6}{black!65}
-\csvpiesegmentcol{7}{black!75}
-\csvpiesegmentcol{8}{black!85}
-\fi
-% \end{macrocode}
-% Define keys for "\csvpiechart" optional argument
-% \begin{macrocode}
-\define@key{csvpie}{start}{\setcounter{csvstartangle}{#1}}
-\define@key{csvpie}{total}{\setcounter{csvpietotal}{#1}}
-\define@key{csvpie}{radius}{\setlength{\csvradius}{#1}}
-\define@key{csvpie}{inner}{\setlength{\csvinner}{#1\csvradius}}
-\define@key{csvpie}{outer}{\setlength{\csvouter}{#1\csvradius}}
-\define@key{csvpie}{offset}{\setlength{\csvcutawayoffset}{#1\csvradius}}
-\define@key{csvpie}{cutaway}{\renewcommand*{\csvpiecutaways}{#1}}
-\providecommand*{\csv@startrow}{1}
-\define@key{csvpie}{firstrow}{\renewcommand*{\csv@startrow}{#1}}
-% \end{macrocode}
-% Define "\csvpiechart". The starred version uses "\applyCSVfile*",
-% the unstarred version uses "\applyCSVfile".
-% \begin{macrocode}
-\newcommand{\csvpiechart}{%
-\@ifstar{\def\@@pieapplyCSVfile{\applyCSVfile*}%
-\def\csv@startrow{1}%
-\@csvpiechart}{%
-\def\@@pieapplyCSVfile{\applyCSVfile}%
-\def\csv@startrow{2}%
-\@csvpiechart}%
-}
-% \end{macrocode}
-% Set the keys for pie chart:
-% \begin{macrocode}
-\newcommand*{\csvpiesetkeys}[1]{%
-\edef\csv@piesk{\noexpand\setkeys{csvpie}{\csvpiedefaults,#1}}%
-\csv@piesk}
-% \end{macrocode}
-% The main body of "\csvpiechart".
-% \begin{macrocode}
-\newcommand{\@csvpiechart}[3][]{%
-{\csvpiesetkeys{#1}%
-\edef\csv@startang{\number\c@csvstartangle}%
-\csv@computeangles{#2}{#3}%
-\setcounter{csvstartangle}{\csv@startang}%
-\begin{tikzpicture}%
-\@@pieapplyCSVfile[\csv@startrow]{#3}{%
-\csvpiesegment{#2}}%
-\end{tikzpicture}%
-}}
-% \end{macrocode}
-% Do individual segment in pie chart.
-% \begin{macrocode}
-\newcommand*{\csvpiesegment}[1]{%
-\setcounter{csvstartangle}{%
-\csname csv@sang@\romannumeral\c@csvrownumber\endcsname}%
-\setcounter{csvangle}{%
-\csname csv@angle@\romannumeral\c@csvrownumber\endcsname}%
-\setcounter{csvendangle}{\value{csvangle} + \value{csvstartangle}}%
-\setcounter{csvangle}{%
-\csname csv@cut@angle\romannumeral\c@csvrownumber\endcsname}%
-\ifthenelse{\value{csvangle}>180}{\addtocounter{csvangle}{-360}}{}%
-\edef\@csv@shift{(\number\c@csvangle:%
-\csname csv@cut@len\romannumeral\c@csvrownumber\endcsname)}%
-\setcounter{csvangle}{%
-\csname csv@angle@\romannumeral\c@csvrownumber\endcsname/2
-+\value{csvstartangle}}%
-\begin{scope}[shift={\@csv@shift}]%
-\fill[color=\csvpiesegcolname\c@csvrownumber] (0,0) --
-(\thecsvstartangle:\csvradius)
-arc (\thecsvstartangle:\thecsvendangle:\csvradius) -- cycle;
-% if 90 < csvangle < 270, the text will look upside-down, so
-% adjust accordingly. Reusing csvstartangle, to save defining
-% a new counter, as it's no longer required
-\ifthenelse{\(\value{csvangle}>90 \and \value{csvangle}<270\)
-\TE@or \value{csvangle}<-90}{%
-\setcounter{csvstartangle}{\value{csvangle}-180}%
-\draw (\thecsvangle:\csvinner)
-node[left,rotate=\thecsvstartangle]{\csvpieinnerlabel};
-\draw (\thecsvangle:\csvouter)
-node[left,rotate=\thecsvstartangle]{\csvpieouterlabel};
-}{%
-\draw (\thecsvangle:\csvinner)
-node[right,rotate=\thecsvangle]{\csvpieinnerlabel};
-\draw (\thecsvangle:\csvouter)
-node[right,rotate=\thecsvangle]{\csvpieouterlabel};
-}%
-\end{scope}%
-}
-% \end{macrocode}
-% Compute the angles for each segment. First argument is
-% variable, second argument is the name
-% of the CSV file.
-% \begin{macrocode}
-\newcommand*{\csv@computeangles}[2]{%
-\@@pieapplyCSVfile[\csv@startrow]{#2}{%
-\csvsetsegmentparams{\c@csvrownumber}{#1}%
-}%
-\ifthenelse{\equal{\csvpiecutaways}{}}{}{\csvcomputeoffsets}}
-% \end{macrocode}
-% Compute offset angles for cutaway segments.
-% "\csv@row" should either be a single number (e.g.\ "2")
-% or a number range (e.g.\ "1-2")
-% \begin{macrocode}
-\newcommand*{\csvcomputeoffsets}{%
-\@for\csv@row:=\csvpiecutaways\do{%
-\expandafter\@csv@set@off\csv@row-\relax
-}}
-% \end{macrocode}
-% Set the offset angle.
-% \begin{macrocode}
-\def\@csv@set@off#1-#2\relax{%
-\ifthenelse{\equal{#2}{}}{%
-\@@csv@set@off{#1}}{%
-\@@csv@set@offr#1-#2\relax}%
-}
-% \end{macrocode}
-% Set offset for individual segment:
-% \begin{macrocode}
-\newcommand*{\@@csv@set@off}[1]{%
-\setcounter{csvangle}{%
-\csname csv@angle@\romannumeral#1\endcsname/2
-+ \csname csv@sang@\romannumeral#1\endcsname}%
-\expandafter\xdef\csname csv@cut@angle\romannumeral#1\endcsname{%
-\number\c@csvangle}%
-\expandafter
-\gdef\csname csv@cut@len\romannumeral\csv@row\endcsname{%
-\csvcutawayoffset}%
-}
-% \end{macrocode}
-% Set offset for range of segments:
-% \begin{macrocode}
-\newcount\@csv@seg
-\def\@@csv@set@offr#1-#2-\relax{%
-\ifnum#1>#2\relax
-\PackageError{csvpie}{Segment ranges must go in ascending
-order}{Try #2-#1 instead of #1-#2}%
-\else
-\setcounter{csvangle}{0}%
-\@csv@seg=#1\relax
-\whiledo{\not\(\@csv@seg > #2\)}{%
-\addtocounter{csvangle}{%
-\csname csv@angle@\romannumeral\@csv@seg\endcsname}%
-\advance\@csv@seg by 1}%
-\setcounter{csvangle}{\value{csvangle}/2
-+ \csname csv@sang@\romannumeral#1\endcsname}%
-\@csv@seg=#1\relax
-\whiledo{\not\(\@csv@seg > #2\)}{%
-\expandafter\xdef\csname csv@cut@angle\romannumeral\@csv@seg\endcsname{%
-\number\c@csvangle}%
-\expandafter
-\gdef\csname csv@cut@len\romannumeral\@csv@seg\endcsname{%
-\csvcutawayoffset}%
-\advance\@csv@seg by 1}%
-\fi
-}
-% \end{macrocode}
-% Set the relevent variables required for "\csvpiesegment":
-% The first argument is the segment number, the second argument
-% is the variable. The "csvstartangle" counter is updated.
-% This command should be called sequentially, and is provided
-% for the convenience of \texttt{csvtools.pl}.
-% \begin{macrocode}
-\newcommand*{\csvsetsegmentparams}[2]{%
-\ifthenelse{\value{csvstartangle}>180}{%
-\addtocounter{csvstartangle}{-360}}{}%
-\ifthenelse{\value{csvstartangle}<-180}{%
-\addtocounter{csvstartangle}{360}}{}%
-\expandafter
-\xdef\csname csv@sang@\romannumeral#1\endcsname{%
-\number\c@csvstartangle}%
-\setcounter{csvangle}{360*\real{#2}/\value{csvpietotal}}%
-\addtocounter{csvstartangle}{\value{csvangle}}%
-\expandafter
-\xdef\csname csv@angle@\romannumeral#1\endcsname{%
-\number\c@csvangle}%
-\expandafter
-\gdef\csname csv@cut@angle\romannumeral#1\endcsname{0}%
-\expandafter
-\gdef\csname csv@cut@len\romannumeral#1\endcsname{0cm}%
-}
-% \end{macrocode}
-%\iffalse
-% \begin{macrocode}
-%</csvpie.sty>
-% \end{macrocode}
-%\fi
-%\iffalse
-% \begin{macrocode}
-%<*csvsort.sty>
-% \end{macrocode}
-%\fi
-%\subsection{csvsort.sty}
-% Declare package:
-% \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{csvsort}[2007/07/03 v1.0 (NLCT)]
-% \end{macrocode}
-% If \cmdname{compare} hasn't been defined, use compare.tex
-% \begin{macrocode}
-\@ifundefined{compare}{\input{compare}}{}
-% \end{macrocode}
-% Define comparison commands. Each of the comparison commands must
-% set the boolean \cmdname{if@csv@ishigher}
-% \begin{macrocode}
-\newif\if@csv@ishigher
-% \end{macrocode}
-% Alphabetical ascending comparison:
-% \begin{macrocode}
-\newcommand{\csv@alphaascendingcompare}[2]{%
-\@csv@extractkey#1{\@csv@keya}%
-\@csv@extractkey#2{\@csv@keyb}%
-\csvsort@verbose{Comparing \@csv@keya\space and \@csv@keyb}%
-\edef\@csvsrt@result{\noexpand\compare{\@csv@keya}{\@csv@keyb}}%
-\ifnum\@csvsrt@result=1\relax
- \@csv@ishighertrue
-\else
- \@csv@ishigherfalse
-\fi}
-% \end{macrocode}
-% Alphabetical descending comparison:
-% \begin{macrocode}
-\newcommand{\csv@alphadescendingcompare}[2]{%
-\@csv@extractkey#1{\@csv@keya}%
-\@csv@extractkey#2{\@csv@keyb}%
-\csvsort@verbose{Comparing \@csv@keya\space and \@csv@keyb}%
-\edef\@csvsrt@result{\noexpand\compare{\@csv@keya}{\@csv@keyb}}%
-\ifnum\@csvsrt@result=-1\relax
- \@csv@ishighertrue
-\else
- \@csv@ishigherfalse
-\fi}
-% \end{macrocode}
-% Numerical ascending comparison:
-% \begin{macrocode}
-\newcommand{\csv@numericascendingcompare}[2]{%
-\@csv@extractkey#1{\@csv@keya}%
-\@csv@extractkey#2{\@csv@keyb}%
-\if\relax\@csv@keya\relax\def\@csv@keya{0}\fi
-\if\relax\@csv@keyb\relax\def\@csv@keyb{0}\fi
-\csvsort@verbose{Comparing \number\@csv@keya\space and \number\@csv@keyb}%
-\ifnum\@csv@keya>\@csv@keyb\relax
- \@csv@ishighertrue
-\else
- \@csv@ishigherfalse
-\fi}
-% \end{macrocode}
-% Numerical descending comparison:
-% \begin{macrocode}
-\newcommand{\csv@numericdescendingcompare}[2]{%
-\@csv@extractkey#1{\@csv@keya}%
-\@csv@extractkey#2{\@csv@keyb}%
-\if\relax\@csv@keya\relax\def\@csv@keya{0}\fi
-\if\relax\@csv@keyb\relax\def\@csv@keyb{0}\fi
-\csvsort@verbose{Comparing \number\@csv@keya\space and \number\@csv@keyb}%
-\ifnum\@csv@keya<\@csv@keyb\relax
- \@csv@ishighertrue
-\else
- \@csv@ishigherfalse
-\fi}
-% \end{macrocode}
-% The sort key needs to be extracted from the data (3rd argument
-% must be a control sequence):
-% \begin{macrocode}
-\def\@csv@extractkey#1#2#3{\def#3{#1}}
-% \end{macrocode}
-% Conversely, extract the data and ignore the sort key:
-% \begin{macrocode}
-\def\@csv@extractdata#1#2#3{\def#3{#2}}
-% \end{macrocode}
-% The command \cmdname{csv@compare} should be set to the
-% appropriate comparison command (\cmdname{csv@alphaascendingcompare}
-% by default.)
-% \begin{macrocode}
-\let\csv@compare\csv@alphaascendingcompare
-% \end{macrocode}
-% The package options are a comma-separated list of key=value
-% pairs, so need the \stynamefmt{xkeyval} package.
-% \begin{macrocode}
-\RequirePackage{xkeyval}
-% \end{macrocode}
-% Package options. Verbose mode:
-% \begin{macrocode}
-\define@boolkey{csvsort.sty}[csvsrt]{verbose}[true]{}
-% \end{macrocode}
-% Default is verbose:
-% \begin{macrocode}
-\csvsrtverbosetrue
-% \end{macrocode}
-% Define command to display message if verbose option is set:
-% \begin{macrocode}
-\newcommand{\csvsort@verbose}[1]{%
-\ifcsvsrtverbose\typeout{#1}\fi}
-% \end{macrocode}
-% Sort type (can be either numerical or alphabetical, ascending
-% or descending):
-% \begin{macrocode}
-\define@choicekey{csvsort.sty}{sort}[\val\nr]{alphabetical,numerical,%
-alphabetical ascending,numerical ascending,%
-alphabetical descending,numerical descending,%
-alphabeticalascending,alphabeticaldescending,%
-numericalascending,numericaldescending}{%
-\ifcase\nr
- % alphabetical (ascending)
- \let\csv@compare\csv@alphaascendingcompare
- \or
- % numerical (ascending)
- \let\csv@compare\csv@numericascendingcompare
- \or
- % alphabetical ascending
- \let\csv@compare\csv@alphaascendingcompare
- \or
- % numerical ascending
- \let\csv@compare\csv@numericascendingcompare
- \or
- % alphabetical descending
- \let\csv@compare\csv@alphadescendingcompare
- \or
- % numerical descending
- \let\csv@compare\csv@numericdescendingcompare
- \or
- % alphabeticalascending
- \let\csv@compare\csv@alphaascendingcompare
- \or
- % alphabetical descending
- \let\csv@compare\csv@alphadescendingcompare
- \or
- % numericalascending
- \let\csv@compare\csv@numericascendingcompare
- \or
- % numericaldescending
- \let\csv@compare\csv@numericdescendingcompare
-\fi}
-% \end{macrocode}
-% The variable used to sort is given by:
-% \begin{macrocode}
-\newcommand{\csv@sortvariable}{\field{1}}
-% \end{macrocode}
-% A different variable can be set using the variable package option:
-% \begin{macrocode}
-\define@key{csvsort.sty}{variable}{%
-\renewcommand{\csv@sortvariable}{#1}}
-% \end{macrocode}
-% The first data line in CSV files with no headers is given by
-% \begin{macrocode}
-\newcounter{sfirstdataline}
-% \end{macrocode}
-% and defaults to line 1:
-% \begin{macrocode}
-\setcounter{sfirstdataline}{1}
-% \end{macrocode}
-% This value can be set using the "sfirstdataline" option:
-% \begin{macrocode}
-\define@key{csvsort.sty}{sfirstdataline}{%
-\setcounter{sfirstdataline}{#1}}
-% \end{macrocode}
-% The first data line in CSV files with headers is given by
-% \begin{macrocode}
-\newcounter{firstdataline}
-% \end{macrocode}
-% and defaults to line 2:
-% \begin{macrocode}
-\setcounter{firstdataline}{2}
-% \end{macrocode}
-% This value can be set using the "firstdataline" option:
-% \begin{macrocode}
-\define@key{csvsort.sty}{firstdataline}{%
-\setcounter{firstdataline}{#1}}
-% \end{macrocode}
-% Process package options:
-% \begin{macrocode}
-\ProcessOptionsX
-% \end{macrocode}
-% Required packages:
-% \begin{macrocode}
-\RequirePackage{csvtools}
-\RequirePackage{xfor}
-% \end{macrocode}
-% Insertion sort macro. The argument is a comma-separated list
-% in the form \marg{sort-key1}\marg{data1},\ldots,%
-%\marg{sort-keyN}\marg{dataN}. The list is sorted according to
-% \cmdname{csv@compare}
-%\begin{macro}{\csv@insertionsort}
-% \begin{macrocode}
-\newcommand{\csv@insertionsort}[1]{%
-\let\@csv@sortedlist\relax
-\@for\@csv@listelement:=#1\do{%
-\if\@csv@sortedlist\relax
- \expandafter\toks@\expandafter{\@csv@listelement}%
- \edef\@csv@sortedlist{\the\toks@}%
-\else
- \expandafter\@csv@insert@into\expandafter
- {\@csv@listelement}{\@csv@sortedlist}%
-\fi}\let#1\@csv@sortedlist}
-% \end{macrocode}
-%\end{macro}
-% Insert element (first argument) into a sorted list (second argument)
-% Each element must be in the form \marg{sort-key}\marg{data}, where
-% \cmdname{csv@compare} sorts according to \meta{sort-key}. The
-% insertion code ignores \meta{data}.
-%\begin{macro}{\@csv@insertinto}
-% \begin{macrocode}
-\newcommand\@csv@insert@into[2]{%
-\let\@csv@tmplist\relax
-\@for\@sort@list@element:=#2\do{%
- \expandafter\csv@compare\expandafter{\@sort@list@element}{#1}%
- \if@csv@ishigher
- \toks@{#1}%
- \if\relax\@csv@tmplist
- \edef\@csv@tmplist{\the\toks@,\@sort@list@element}%
- \else
- \edef\@csv@tmplist{\@csv@tmplist,\the\toks@,\@sort@list@element}%
- \fi
- \@endfortrue
- \else
- \if\relax\@csv@tmplist
- \edef\@csv@tmplist{\@sort@list@element}%
- \else
- \edef\@csv@tmplist{\@csv@tmplist,\@sort@list@element}%
- \fi
- \fi
-}%
-\if@endfor
- \ifx\@forremainder\@empty
- \else
- \edef\@csv@tmplist{\@csv@tmplist,\@forremainder}%
- \fi
-\else
- \toks@{#1}%
- \if\relax\@csv@tmplist
- \edef\@csv@tmplist{\the\toks@}%
- \else
- \edef\@csv@tmplist{\@csv@tmplist,\the\toks@}%
- \fi
-\fi
-\@endforfalse
-\let#2\@csv@tmplist
-}
-% \end{macrocode}
-%\end{macro}
-% Define \cmdname{sortapplyCSVfile}. This is akin to \stynamefmt{csvtools}'
-% \cmdname{applyCSVfile}, except it stores each data row in a list,
-% sorts the list, and then iterates through the sorted list. As
-% with, \cmdname{applyCSVfile}, the starred version should be used
-% for a file that doesn't contain a header row, and the un-starred
-% version should be used for a file that has a header row. Both
-% forms take an optional argument, which should be a key=value list,
-% the same as the package options, but they only apply to the
-% current instance of \cmdname{sortapplyCSVfile}.
-%\begin{macro}{\sortapplyCSVfile}
-% \begin{macrocode}
-\newcommand{\sortapplyCSVfile}{%
-\@ifstar\@ssortapplyCSVfile\@sortapplyCSVfile}
-% \end{macrocode}
-%\end{macro}
-% Starred version (see above):
-%\begin{macro}{\@ssortapplyCSVfile}
-% \begin{macrocode}
-\newcommand{\@ssortapplyCSVfile}[3][]{%
-\bgroup
-\setkeys{csvsort.sty}{#1}%
-\def\@csv@list{}%
-\@sapplyCSVfile[\c@sfirstdataline]{#2}{%
-\edef\csv@key{\csv@sortvariable}%
-\if\relax\@csv@list\relax
-\protected@xdef\@csv@list{{\csv@key}{\csvline}}%
-\else
-\protected@xdef\@csv@list{\@csv@list,{\csv@key}{\csvline}}%
-\fi
-}%
-\@ssortapplyCSVdata{\@csv@list}{#3}%
-\egroup}
-% \end{macrocode}
-%\end{macro}
-% Unstarred version (see above):
-%\begin{macro}{\@sortapplyCSVfile}
-% \begin{macrocode}
-\newcommand{\@sortapplyCSVfile}[3][]{%
-\bgroup
-\setkeys{csvsort.sty}{#1}%
-\def\@csv@list{}%
-\@applyCSVfile[\c@firstdataline]{#2}{%
-\edef\csv@key{\csv@sortvariable}%
-\if\relax\@csv@list\relax
-\protected@xdef\@csv@list{{\csv@key}{\csvline}}%
-\else
-\protected@xdef\@csv@list{\@csv@list,{\csv@key}{\csvline}}%
-\fi
-}%
-\@sortapplyCSVdata{\@csv@list}{#3}%
-\egroup}
-% \end{macrocode}
-%\end{macro}
-% \cmdname{sortapplyCSVdata}\oarg{sort type}\marg{cmd}\marg{text}
-% will sort the data given by \meta{cmd}, which should contain
-% a comma separated
-% list of the form \marg{sort1}\marg{data1},\ldots\marg{sortN}\marg{dataN}
-% and the applies \meta{text} to each data element of the list.
-% The sort ordering is specified by \meta{sort type}, which should
-% have the same values as the sort key used by
-% \cmdname{sortapplyCSVfile}.
-% The starred version doesn't permit
-% \cmdname{insert}\meta{label} commands. First argument is the list,
-% the second argument specifies what to do for each data element.
-% (Note, these commands are primarily provided for the
-% benefit of \texttt{csvtools.pl}, which is why they're not
-% documented in the main part of the \stynamefmt{csvtools} manual.)
-%\begin{macro}{\sortapplyCSVdata}
-% \begin{macrocode}
-\newcommand{\sortapplyCSVdata}{%
-\@ifstar\@ssortapplyCSVdata\@sortapplyCSVdata}
-% \end{macrocode}
-%\end{macro}
-% Starred version:
-%\begin{macro}{\@ssortapplyCSVdata}
-% \begin{macrocode}
-\newcommand{\@ssortapplyCSVdata}[3][\relax]{%
-\bgroup
-\if\relax#1\relax\else\setkeys{csvsort.sty}{sort=#1}\fi
-\csv@insertionsort{#2}%
-\c@csvrownumber=0\relax
-\@for\@csv@element:=#2\do{%
-\expandafter\@csv@extractdata\@csv@element\csvline
-\expandafter\toks@\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\toks@\@csvseparator}%
-\long\edef\@csvlin@{\@csvseparator\csvline\@csvseparator}%
-\c@field=0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\expandafter\toks@\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter\xdef\csname @field\romannumeral\c@field\endcsname{%
-\the\toks@}%
-}%
-\ifthenelse{\not\equal{\csvline}{}}{%
-\refstepcounter{csvrownumber}%
-#3}{}%
-}%
-\egroup
-}
-% \end{macrocode}
-%\end{macro}
-% Unstarred version (field labels will need to be set (using
-% \cmdname{setcsvfieldlabel}) before using this macro.)
-%\begin{macro}{\@sortapplyCSVdata}
-% \begin{macrocode}
-\newcommand{\@sortapplyCSVdata}[3][\relax]{%
-\bgroup
-\if\relax#1\relax\else\setkeys{csvsort.sty}{sort=#1}\fi
-\csv@insertionsort{#2}%
-\c@csvrownumber=0\relax
-\@for\@csv@element:=#2\do{%
-\expandafter\@csv@extractdata\@csv@element\csvline
-\expandafter\toks@\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\toks@\@csvseparator}%
-\long\edef\@csvlin@{\@csvseparator\csvline\@csvseparator}%
-\c@field=0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-\expandafter\toks@\expandafter{\param}%
-\advance\c@field by 1\relax
-\expandafter\xdef\csname @field\romannumeral\c@field\endcsname{%
-\the\toks@}%
-\edef\@fieldlabel{%
-\csname @fieldlabel\romannumeral\c@field\endcsname}%
-\expandafter\xdef\csname insert\@fieldlabel\endcsname{\the\toks@}%
-}%
-\ifthenelse{\not\equal{\csvline}{}}{%
-\refstepcounter{csvrownumber}%
-#3}{}%
-}%
-\egroup
-}
-% \end{macrocode}
-%\end{macro}
-% Define \cmdname{sortCSVtotabular}. This is akin to \stynamefmt{csvtools}'
-% \cmdname{CSVtotabular}, but sorts the data. Takes an optional
-% argument that is a key=value list which is that same as the
-% package options, but only applies to this instance of
-%\cmdname{sortCSVtotabular}. This command first loads all the data
-% into a list, sorts the list, and then puts it in a tabular
-% environment. The total number of data rows is stored in
-% \cmdname{maxlines}.
-%\begin{macro}{\sortCSVtotabular}
-% \begin{macrocode}
-\newcommand{\sortCSVtotabular}[6][]{%
-\@sortCSVtotabular[#1]{#2}{#3}{#4}{#5}{#6}{tabular}}
-% \end{macrocode}
-%\end{macro}
-% As above, but use longtable environment instead:
-%\begin{macro}{\sortCSVtolongtable}
-% \begin{macrocode}
-\newcommand{\sortCSVtolongtable}[6][]{%
-\@sortCSVtotabular[#1]{#2}{#3}{#4}{#5}{#6}{longtable}}
-% \end{macrocode}
-%\end{macro}
-% The final argument specifies which tabular-like environment
-% to use:
-%\begin{macro}{\@sortCSVtotabular}
-% \begin{macrocode}
-\newcommand{\@sortCSVtotabular}[7][]{%
-\bgroup
-\setkeys{csvsort.sty}{#1}%
-% \end{macrocode}
-% Read all data into \cmdname{@csv@list}:
-% \begin{macrocode}
-\def\@csv@list{}%
-\@applyCSVfile[\c@firstdataline]{#2}{%
-\edef\csv@key{\csv@sortvariable}%
-\if\relax\@csv@list\relax
-\protected@xdef\@csv@list{{\csv@key}{\csvline}}%
-\else
-\protected@xdef\@csv@list{\@csv@list,{\csv@key}{\csvline}}%
-\fi
-}%
-% \end{macrocode}
-% Sort data, and put in required tabular-like environment
-% \begin{macrocode}
-\sortCSVdatatotabular{\c@csvrownumber}{\@csv@list}{#3}{#4}{#5}{#6}{#7}%
-\egroup
-}
-% \end{macrocode}
-%\end{macro}
-% \cmdname{sortCSVdatatotabular}\marg{n}\marg{list}\marg{col-align}\marg{header-row}\marg{all but last rows}\marg{last row}\marg{env-name}\par
-% This command sorts the data specified by \meta{list} (which has
-% \meta{n} elements) and puts in a tabular-like environment called
-% \meta{env-name}. This command is mainly provided for the benefit
-% of \texttt{csvtools.pl}, which is why it is not documented in the
-% main part of the \stynamefmt{csvtools} manual. Field names must be
-% set prior to use (using \cmdname{setcsvfieldlabel}.)
-%\begin{macro}{\sortCSVdatatotabular}
-% \begin{macrocode}
-\newcommand{\sortCSVdatatotabular}[7]{%
-% \end{macrocode}
-% Set \cmdname{maxlines} (total number of data rows, not including
-% header row).
-% \begin{macrocode}
-\maxlines=#1\relax
-% \end{macrocode}
-% Sort the data:
-% \begin{macrocode}
-\csv@insertionsort{#2}%
-% \end{macrocode}
-% Set \cmdname{csvlastbutone} to \cmdname{maxlines}$-1$:
-% \begin{macrocode}
-\csvlastbutone=\maxlines
-\advance\csvlastbutone by -1\relax
-% \end{macrocode}
-% Reset \cmdname{c@csvrownumber}:
-% \begin{macrocode}
-\c@csvrownumber=0\relax
-\c@csvlinenum=0\relax
-% \end{macrocode}
-% Initialise first row, last row and middle rows (in case not enough
-% data)
-% \begin{macrocode}
-\def\@r@wh{#4}\def\@r@w{}\def\@r@wl{}%
-% \end{macrocode}
-% Iterate through each element of sorted list
-% \begin{macrocode}
-\@for\@csv@element:=#2\do{%
-% \end{macrocode}
-% Extract data from the current list element (ignoring sort key)
-% and store in \cmdname{csvline}:
-% \begin{macrocode}
-\expandafter\@csv@extractdata\@csv@element\csvline
-% \end{macrocode}
-% Extract each field of \cmdname{csvline}:
-% \begin{macrocode}
-\expandafter\toks@\expandafter{\csvline}%
-\edef\@csvlin@{\@csvseparator\the\toks@\@csvseparator}%
-\long\edef\@csvlin@{\@csvseparator\csvline\@csvseparator}%
-\c@field=0\relax
-\whiledo{\not\equal{\@csvlin@}{\@csvseparator}}{%
-\extractentry{\@csvlin@}{\param}%
-% \end{macrocode}
-% Store field in \cmdname{toks@}
-% \begin{macrocode}
-\expandafter\toks@\expandafter{\param}%
-% \end{macrocode}
-% Increment field counter
-% \begin{macrocode}
-\advance\c@field by 1\relax
-% \end{macrocode}
-% Define \cmdname{field}\meta{n} and associated
-% \cmdname{insert}\meta{label}
-% \begin{macrocode}
-\expandafter\xdef\csname @field\romannumeral\c@field\endcsname{%
-\the\toks@}%
-\edef\@fieldlabel{%
-\csname @fieldlabel\romannumeral\c@field\endcsname}%
-\expandafter\xdef\csname insert\@fieldlabel\endcsname{\the\toks@}%
-}%
-% \end{macrocode}
-% Increment row counter.
-% \begin{macrocode}
-\refstepcounter{csvrownumber}%
-\refstepcounter{csvlinenum}%
-% \end{macrocode}
-% Check to see if this is the first row, last row, of somewhere in
-% between
-% \begin{macrocode}
-\ifnum\c@csvrownumber=\maxlines
- \protected@edef\@r@wl{#6}%
-\else
- \expandafter\toks@\expandafter{\@r@w}
- \protected@edef\@r@w{\the\toks@#5}%
-\fi
-}%
-% \end{macrocode}
-% Now do tabular environment:
-% \begin{macrocode}
-\begin{#7}{#3}%
-\@r@wh
-\@r@w
-\@r@wl
-\end{#7}%
-}
-% \end{macrocode}
-%\end{macro}
-%\iffalse
-% \begin{macrocode}
-%</csvsort.sty>
-% \end{macrocode}
-%\fi
-%\Finale
-\endinput
diff --git a/Master/texmf-dist/source/latex/csvtools/csvtools.ins b/Master/texmf-dist/source/latex/csvtools/csvtools.ins
deleted file mode 100644
index a4b96b0cd8e..00000000000
--- a/Master/texmf-dist/source/latex/csvtools/csvtools.ins
+++ /dev/null
@@ -1,23 +0,0 @@
-% csvtools.ins generated using makedtx version 0.91b 2007/7/3 10:24
-\input docstrip
-
-\preamble
-Copyright (C) 2007 Nicola Talbot, all rights reserved.
-If you modify this file, you must change its name first.
-You are NOT ALLOWED to distribute this file alone. You are NOT
-ALLOWED to take money for the distribution or use of either this
-file or a changed version, except for a nominal charge for copying
-etc.
-\endpreamble
-
-\askforoverwritefalse
-
-\generate{\file{csvpie.sty}{\usepreamble\defaultpreamble
-\usepostamble\defaultpostamble\from{csvtools.dtx}{csvpie.sty,package}}
-\file{csvsort.sty}{\usepreamble\defaultpreamble
-\usepostamble\defaultpostamble\from{csvtools.dtx}{csvsort.sty,package}}
-\file{csvtools.sty}{\usepreamble\defaultpreamble
-\usepostamble\defaultpostamble\from{csvtools.dtx}{csvtools.sty,package}}
-}
-
-\endbatchfile