remove mt11p, not installed right and does not support belleek

git-svn-id: svn://tug.org/texlive/trunk@3292 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 0 insertions, 3020 deletions

diff --git a/Master/texmf-dist/source/latex/mt11p/mt11p.drv b/Master/texmf-dist/source/latex/mt11p/mt11p.drv
deleted file mode 100644
index eddde97ffb2..00000000000
--- a/Master/texmf-dist/source/latex/mt11p/mt11p.drv
+++ /dev/null
@@ -1,31 +0,0 @@
-%%
-%% This is file `mt11p.drv',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% mt11p.dtx  (with options: `driver')
-%% 
-%% IMPORTANT NOTICE:
-%% 
-%% For the copyright see the source file.
-%% 
-%% Any modified versions of this file must be renamed
-%% with new filenames distinct from mt11p.drv.
-%% 
-%% For distribution of the original source see the terms
-%% for copying and modification in the file mt11p.dtx.
-%% 
-%% This generated file may be distributed as long as the
-%% original source files, as listed above, are part of the
-%% same distribution. (The sources need not necessarily be
-%% in the same archive or directory.)
-\NeedsTeXFormat{LaTeX2e}
-\documentclass{ltxdoc}
-\begin{document}
- \GetFileInfo{mt11p.dtx}
- \DocInput{mt11p.dtx}
-\end{document}
-\endinput
-%%
-%% End of file `mt11p.drv'.
diff --git a/Master/texmf-dist/source/latex/mt11p/mt11p.dtx b/Master/texmf-dist/source/latex/mt11p/mt11p.dtx
deleted file mode 100644
index b8cbd09a0fb..00000000000
--- a/Master/texmf-dist/source/latex/mt11p/mt11p.dtx
+++ /dev/null
@@ -1,2939 +0,0 @@
-%
-% \iffalse % meta-comment
-%<*package>
-%    \begin{macrocode}
-%%
-%% mt11p.dtx
-%% Copyright 1997, 2002 Drahoslav L\'im
-%% 
-%% This program may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.2
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.2 or later is part of all distributions of LaTeX 
-%% version 1999/12/01 or later.
-%% 
-%% This program consists of the following files:
-%% 0readme
-%% mt11p.dtx (this file)
-%% mt11p.ins
-%% mt11p.ps (formatted documentation)
-%% mt11p.map
-%% the binary tfm files:
-%%              mtex.tfm mtexb.tfm mtexh.tfm mtgu.tfm
-%%              mtgub.tfm mtmi.tfm mtmib.tfm mtmih.tfm
-%%              mtms.tfm mtmsb.tfm mtmu.tfm mtmub.tfm
-%%              mtmuh.tfm mtsyb.tfm mtsyh.tfm mtsyn.tfm
-%%              rmtmi.tfm rmtmib.tfm rmtmih.tfm rmtmub.tfm
-%%              rmtmuh.tfm
-%% 
-%% the binary vf files:
-%%              mtmi.vf mtmib.vf mtmih.vf mtmu.vf
-%%              mtmub.vf mtmuh.vf
-%%
-%% Use at your own risk.
-%%
-%% Send bug reports to DrahoslavL@seznam.cz
-%%
-%%
-%    \end{macrocode}
-%
-% QUICK INSTALLATION GUIDE:
-%
-% Run LaTeX on this dtx file to generate the documentation.
-%
-% Run TeX on mt11p.ins to generate the style file mt11p.sty.
-% Run latex on mt11p.drv to get documentation with commented source code.
-%
-% Copy mt11p.sty to the TeX input file area.
-%
-% Copy the PFA or PFB files from the Y&Y distribution
-% diskettes to the appropriate area on your system.
-% Edit mt11p.map, and/or rename/convert the Type1 font
-% files so that the data in the map file and the actual file names
-% are consistent. 
-% 
-% Copy the TFMs and VFs into the appropriate areas on your system.
-% Pass the information in mt11p.map to your dvi driver, e.g.,
-% append it to psfonts.map. Note that the TFM files are not
-% identical to the ones on the Y&Y floppies.
-%
-% NOTE: The VFs assume the 8r-base version of PSNFSS is available, the
-% style files check whether files called 
-% ``\encodingdefault\[rm|sf|tt]default.fd'' (e.g., T1ptm.fd or t1ptm.fd)
-% exist, and if the metric file ``ptmr8r.tfm'' is available.
-%
-% \fi
-%
-% \CharacterTable
-%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%   Digits        \0\1\2\3\4\5\6\7\8\9
-%   Exclamation   \!     Double quote  \"     Hash (number) \#
-%   Dollar        \$     Percent       \%     Ampersand     \&
-%   Acute accent  \'     Left paren    \(     Right paren   \)
-%   Asterisk      \*     Plus          \+     Comma         \,
-%   Minus         \-     Point         \.     Solidus       \/
-%   Colon         \:     Semicolon     \;     Less than     \<
-%   Equals        \=     Greater than  \>     Question mark \?
-%   Commercial at \@     Left bracket  \[     Backslash     \\
-%   Right bracket \]     Circumflex    \^     Underscore    \_
-%   Grave accent  \`     Left brace    \{     Vertical bar  \|
-%   Right brace   \}     Tilde         \~}
-%
-\def\fileversion{0.4a}% corected minor typos in documentation; code not touched
-\def\filedate{1997/01/27}
-\def\docdate {2002/04/05}
-%
-% \iffalse
-%</package>
-%
-%<*driver>\ProvidesFile{mt11p.drv}
-%    \begin{macrocode}
-%        [\filedate: setup\space for\space Times\space
-%         +\space MathTime\space +\space MathTimePlus]
-%    \end{macrocode}
-%
-\NeedsTeXFormat{LaTeX2e}
-\documentclass{ltxdoc}
-%</driver>
-%<*!driver>
-%<*!package>
-%<*!demo>
-\OnlyDescription
-\message{^^JRun LaTeX on mt11p.drv to get the full docs.^^J^^J}
-%</!demo>
-%</!package>
-%</!driver>
-%<*driver>
-\begin{document}
- \GetFileInfo{mt11p.dtx}
- \DocInput{mt11p.dtx}
-\end{document}
-%</driver>
-%
-%<*package>
-% \fi
-%
-% \CheckSum{2389}
-% \providecommand{\pkg}[1]{\texttt{#1}}
-% \providecommand{\file}[1]{\texttt{#1}}
-% \providecommand{\cs}[1]{\texttt{\char`\\#1}}
-% \providecommand{\AmS}{{\fontencoding{OMS}\fontfamily{cmsy}\selectfont
-%            \kern-0.06em A\kern-.15em \lower.5ex\hbox{M}\kern-.1em S\kern.07em}}%
-% \newcommand{\deit}[1]{\item[{\boldmath$^\ddag$}\texttt{\bfseries#1}]}
-% \newcommand{\opit}[1]{\item[\texttt{\bfseries#1}]}
-% \newcommand{\brarg}[1]{\texttt\{$\langle\!$\textit{#1}$\rangle\!$\texttt\}}
-%
-% \title{A package for using the\\
-%        MathT\i me and MathT\i me\textsc{plus}
-%        fonts\thanks{This file
-%        has version number \fileversion, last
-%        revised \filedate.
-%        This file has no connection with the \pkg{mathtime} package
-%        commisioned by Y\&Y\@.}}
-% \author{Drahoslav L\'\i m\\\texttt{DrahoslavL@seznam.cz}}
-% \date{\docdate}
-% \maketitle
-% \begin{abstract}
-% \pkg{mt11p} is a package to relatively painlessly
-% get access to everything
-% available in the MathT\i me and MathT\i me\textsc{plus} commercial
-% math fonts in \LaTeXe. It is compatible with the \AmS{} packages.
-% This package is self-contained and only
-% the Type\,1 font programs need to be copied off of the distribution media.
-% \end{abstract}
-%
-% \begin{multicols}{2}
-% \tableofcontents
-% \end{multicols}
-%
-% \section{Introduction}
-% The use of Computer Modern fonts for equations has been
-% one of the tell-tale signs indicating a document
-% was typeset by \TeX\@. The reasons for this are that
-% there are no good freely available substitute fonts, and
-% that even if there were,
-% changing \TeX's math fonts is a tedious and somewhat cryptic
-% exercise. The first problem can be overcome by purchasing
-% math fonts such as MathT\i me or Lucida. This package
-% is one of the ways overcoming the second, though not the only one.
-% It provides everything \emph{except} the fonts themselves.
-% (You have shell out money and buy those,~\textsc{sorry}).
-%
-% It is assumed you are running \TeX\,3.x and a recent
-% release of \LaTeX\@, and that you have the standard
-% `resident' \textsc{Post\-Script} fonts installed for
-% use as text fonts in~\TeX~(``PSNFSS'')\@.
-% 
-% \section{Installation}
-%
-% This package is useless unless you buy the fonts called
-% \emph{MathT\i me} and \textit{MathT\i me{\footnotesize PLUS\/}}
-% from~Y\&Y; the address is listed in~Sec.\,\ref{ack}.
-%
-% \paragraph{Prerequisites}
-% The ``\texttt{8r}-based'' version of~PSNFSS must be
-% installed on your system to use this package, because the
-% \texttt{VF}s~refer to the \texttt{8r}~``raw'' fonts.
-% Search on CTAN for the string ``\textsf{psnfss}'',
-% consult the \textit{\LaTeX{} Companion}, and/or the \LaTeXe{}
-% distribution
-% on how to do this. You can check if your system already has
-% the relevant files by searching for the \TeX~metric
-% file ``\file{ptmr8r.tfm}'' in the \file{tfm} file area,
-% and for the file ``\file{T1ptm.fd}'' (or
-% maybe~``\file{t1ptm.fd}'') in the \TeX~input
-% file area; if both are present you are probably
-% \textsc{ok} and everything will work.
-%
-% \bigskip
-%
-% This \file{dtx}~file should have come with several
-% sets of accompanying files, whose installation
-% should be routine:
-%
-% Run \TeX~on \file{mt11p.ins}\@; that will generate
-% the package ``style'' file,~\file{mt11p.sty}\@.
-% Copy that file to the \TeX~input file area.
-% Run \LaTeX~on \file{mt11p.drv}~to get commented source code
-% (that's what you're reading now).
-%
-% The \textbf{\texttt{.tfm}~metric files} should be copied to the area
-% where \TeX{} and the \texttt{dvi}~driver program search for
-% font metrics.
-% The \textbf{\texttt{.vf}~definition files} should be copied to
-% the area where the \texttt{dvi}~driver program searches for virtual font
-% definitions. Note that the metric files supplied are \emph{not} identical to the
-% ones distributed with the MathT\i me fonts.
-%
-% The file~\file{mt11p.map} should be
-% ``passed'' to the \texttt{dvi}~driver program to tell it that the
-% MathT\i me fonts are downloadable \textsc{Post\-Script} fonts
-% and what the relevant invocation commands are, or perhaps the file
-% should be passed to
-% a \textsc{Post\-Script} rasterizer (``PS--to--PK'')
-% program if the \texttt{dvi}~driver must use \texttt{PK}~bitmaps.
-% For Rokicki's \textsf{dvips}~driver, the contents
-% of~\file{mt11p.map} can be appended to the
-% ``\file{psfonts.map}''~file.
-%
-% Copy the Type\,1~font ``programs''---files
-% with extension \file{pfa} or \file{pfb}---from Y\&Y's distribution
-% media to the area where your \texttt{dvi}~driver or rasterizer
-% searches for downloadable fonts.
-% Some fonts may be provided in both \file{pfa} and \file{pfb}
-% formats; just pick one, most systems can deal with either.
-% (The \file{pfb}~format is more compact, albeit binary.
-% The \texttt{dvi}~driver can probably
-% convert
-% \file{.pfb} to~\file{.pfa} ``on the fly''.)
-% There are two versions of the normal weight symbol font,
-% \file{mtsy} and~\file{mtsyn}. The difference is minor,
-% but you might as well use the newer~\file{mtsyn}.
-% See the paragraph called ``Symbols'' in the documented
-% source code.\footnote{Run \LaTeX{} on the
-% file~\file{mt11p.drv} to get the commented source code;
-% it follows after~Sec.\,5.}
-% 
-% The names and types (\file{pfa}/\file{pfb})
-% of the downloadable files
-% in~\file{mt11p.map} should be made consistent with the actual names
-% and types under
-% which the Type\,1 font programs are stored on your system.
-% Either rename and/or convert the Type\,1 fonts, or simply edit
-% the contents of~\file{mt11p.map}; beware of case sensitivity.
-%
-% The \texttt{dvi}~driver program will probably not need the
-% \file{afm}~files from the distribution medea, but a 
-% ``PS--to--PK'' rasterizer might; consult the rasterizer
-% documentation. Note that \file{afm}~files are \textsc{ascii}~files,
-% convert line endings as appropriate.
-%
-% At least for this package, no other files from the distribution medea
-% are required.
-%
-% \subsection{Previewing}
-% Whether or not you can preview \file{dvi}~files which use
-% MathT\i me fonts depends on your setup. If you can preview
-% \file{dvi}~files containing other \textsc{Post\-Script}
-% fonts, chances are you can preview with MathT\i me as well,
-% perhaps after running some utility to generate bitmaps, resolve
-% \texttt{VF}~references, etc.
-% Otherwise, it is possible to view the final \textsc{Post\-Script}
-% output of the \file{dvi}~driver on practically all platforms
-% using viewers based on the \textsc{Ghost\-Script}
-% rasterizer, or perhaps using Display\textsc{Post\-Script}.
-%
-% \section{Usage \& Package Options}
-% To switch to Times text and math, it should suffice
-% to say~|\usepackage{mt11p}| in the preamble. The oder
-% of packages should not matter, with one exception:
-% \pkg{mt11p} should be loaded after \AmS{} math packages.
-% Any reasonably cleanly written \LaTeX{} input
-% file will then be typeset with MathT\i me being used
-% for all standard mathematical symbols that would have
-% otherwise been typeset in Computer Modern.
-% There are two notable exceptions, see~Sec.\,\ref{varGamma}.
-%
-% Expect a few dozen lines of warnings as this package is being read,
-% and a notice about substituted fonts at the end of the run.
-% I think it is better to live with these NFSS warnings rather than
-% do some hacks to turn them off.
-%
-% At the end of the run expect a warning about size substitutions
-% if the \texttt{resize}~option was in effect (it is by default).
-% They are are due to the Computer Modern fonts usually having
-% a set of sizes available rather than being declared scalable in the
-% \file{.fd}~file, i.e., a \cs{DeclareFontShape}
-% argument of something like |<10><10.95><12><14.4>|
-% rather than~|<->|.
-% Whether or not something should be done about this depends on
-% what Computer Modern glyphs were used. It may be the case
-% that, in fact, none were---the warnings come from NFSS having
-% loaded fonts for. e.g., \cs{oldstylenums}
-% for math, eventhough you never actually used them.
-% You can change the \file{.fd}~files if you system is
-% capable of generating bitmaps on-the-fly or if you're using
-% \textsc{Post\-Script} versions of the Computer Modern fonts.
-% Consult the \emph{\LaTeX~Companion} or the standard
-% documentation file~\file{fntguide.tex}.
-%
-% \subsection{List of options}
-% This packages has lots of options controlling
-% some detailed aspects of font and math character handling.
-% In general, use the defaults, unless you have some
-% idea of what the implications of a particular option
-% are.
-%
-% Options in effect by default are indicated by
-% a double dagger~($\ddag$).
-%
-% \begin{itemize}
-% \deit{T1} reset the \cs{encodingdefault} (applicable to text fonts and
-%           some math operators, symbols and accents) to~\texttt{T1}.
-% \opit{OT1} reset the \cs{encodingdefault} to the archaic
-%            \texttt{OT1}~encoding; upper case Greek letters are never
-%            taken from the text font, so the only reasons to
-%            do this are human inertia and legacy code.
-% \opit{noenc} assume the current \cs{encodingdefault} is the desired one;
-%           see the commented source
-%           code if you use something other than \texttt{T1}
-%           or~\texttt{OT1}.
-% \bigskip\par
-% \deit{opsafe} use symbols and accents from the
-%           \texttt{operators} math family only when it is
-%           safe to do so.
-% \opit{opnone} do not use the \texttt{operators}~math
-%           family for accents or symbols, except when
-%           this can't be helped;
-%           if \cs{encodingdefault} is
-%           not recognized, this option is auto-invoked.
-% \opit{opmax} take as much from the \texttt{operators}~math
-%           family as possible.
-%           Doing so can produce problematic
-%           output in some circumstances, but it will make the
-%           maximum use of printer resident fonts;
-%           don't use this option
-%           unless you know why you are doing so. See
-%           the paragraph ``Symbols from either
-%           \texttt{operators} or from elsewhere'' in the documented
-%           source code.
-% \bigskip\par
-% \deit{opaccents} take math accents from the \texttt{operators}
-%           math family, and make them follow math alphabet
-%           changes where possible; see~Sec.\,\ref{ACCs}.
-% \opit{symaccents} take math accents from the a fixed (within a
-%           math version) font; if \cs{encodingdefault} is not
-%           recognized, this option is auto-invoked;
-%           see~Sec.\,\ref{ACCs}.
-% \bigskip\par
-% \deit{mtcal} make the MathT\i me script font the
-%          math alphabet \cs{mathcal} and make
-%          \cs{mathscr} and synonym of~\cs{mathcal};
-%          see~Sec.\,\ref{Script}.
-% \opit{cmcal} make the MathT\i me script font the math alphabet
-%          \cs{mathscr} and the Computer Modern symbol
-%          font the \cs{mathcal}~alphabet;
-%          see~Sec.\,\ref{Script}.
-% \opit{nomtms} use the Computer Modern symbol
-%          font as the \cs{mathcal}~alphabet and do not
-%          load the MathT\i me script font
-%          at all; see~Sec.\,\ref{Script}.
-% \bigskip\par
-% \deit{dohbar} overwrite any existing definition of the
-%          \cs{hbar}~($\hbar$)~symbol with one synthesized from
-%          an~``$h$'' and a bar accent. The
-%          definition here is actually rather decent, unlike the simple
-%          one usually used. (At least try it before resorting
-%          to the glyph in the \AmS~fonts\ldots)
-% \opit{nohbar} do nothing with the \cs{hbar} definition,
-%          retain the existing one (if any); e.g.,
-%          the \AmS~fonts
-%          have~\cs{hbar} as a single Computer Modern-like glyph.
-% \bigskip\par
-% \deit{subs} the \texttt{bold} and \texttt{heavy}
-%          math versions in principle need some
-%          `ultra' and `poster' weight fonts; usually
-%          no such fonts are available, so define
-%          substitutes.
-% \opit{nosubs} assume suitable fonts are available
-%          and will be loaded, e.g., using a configuration
-%          file \file{mt11p.cfg}; do not declare
-%          any font substitutions. If should be apparent from
-%          the commented source code or from \file{mt11p.sty} what
-%          \textit{family}/\textit{series}/\textit{shape}~NFSS
-%          declaration the extra fonts should get.
-%          Search for the string ``\textsf{SUBS}''
-%          in the \file{.dtx} or \file{.sty}~file.
-% \deit{do8r} use the raw \texttt{8r}~fonts for the
-%          four symbols \S, \P, \dag, \ddag. The math italic
-%          fonts use the italic \texttt{8r}~raw fonts, so
-%          it's not unreasonable to assume the upright
-%          ones are also available; no support for using
-%          the \texttt{8r}~encoding need be installed on the system,
-%          though we make use of it if it is. \texttt{8r}~is
-%          not used for anything other than these four symbols;
-%          see~Sec.\,\ref{8R}.
-% \opit{no8r} do not use the raw fonts, and take the four
-%          symbols \S, \P, \dag, \ddag\, from a Computer Modern font;
-%          see~Sec.\,\ref{8R}.
-% \opit{nodag} don't touch the definitions of \S, \P, \dag, \ddag{}
-%          at all; assume suitable definitions have been or will be
-%          supplied, e.g., as part of a \texttt{TS1} setup.
-%          See~Sec.\,\ref{8R}.
-% \bigskip\par
-% \deit{bsy} load the \AmS~packages needed to define
-%          the \cs{boldsymbol}~macro, and define analogous
-%          \cs{heavysymbol} and \cs{normalsymbols}~macros.
-% \opit{nobsy} don't load the \AmS~packages for \cs{boldsymbol}
-%          and define \cs{boldsymbol}~and \cs{heavysymbol} to produce
-%          messages and behave as no-ops.
-% \bigskip\par
-% \deit{mathgr} get upright Greek letters as the math alphabet
-%          \cs{mathgr}; see~Sec.\,\ref{par:mathgr}.
-% \opit{nomathgr} do not load the math alphabet \cs{mathgr};
-%          this is only useful if you are running out of
-%          math families, in which case you can use
-%          \cs{greekshape} in an \cs{hbox} with the
-%          obvious limitations. See~ec.\,\ref{par:mathgr}.
-% \bigskip\par
-% \deit{mathOS} get oldstyle digits as a math alphabet;
-%          Computer Modern oldstyle digits are always available
-%          in text.
-% \opit{nomathOS} do not load Computer Modern oldstyle digits
-%          as a math alphabet. See the \texttt{nomathgr} option.
-% \bigskip\par
-% \deit{resize} change the subscript and text font sizing
-%          to better account for the
-%          fact that we are using linearly (not optically) scaled fonts.
-% \opit{noresize} don't touch the math subscript and text font sizing.
-% \bigskip\par
-% \deit{activesb} to improve the spacing in certain subscript
-%          situations, the subscript character ``|_|'' (an
-%          underscore) is made active; this \emph{might} break
-%          some macros; see~Sec.\,\ref{SB}
-% \opit{noactivesb} don't do anything with the underscore.
-% \bigskip\par
-% \deit{times} assume the package (style file) which changes the
-%          roman, sans and typewriter text families to
-%          ``Times\,\&\,Helvetica\,\&\,Courier'' is
-%          called~``\file{times.sty}''; this package
-%          is loaded via \cs{RequirePackage}.
-% \item[\textbf*] any other option will be interpreted as the
-%          name of the style file to use instead of~%
-%          \pkg{times}; e.g., the option ``\texttt{btdutch}''
-%          will attempt to `require' the \pkg{btdutch}~package
-%          instead of the \pkg{times}~package.
-% \end{itemize}
-%
-% \subsection{Interaction with \AmS~macros and other math packages}
-% \label{varGamma}
-% This package does nothing terribly anti-social and can co-exist with
-% \AmS~packages, e.g., \pkg{amsmath}, \pkg{amsfonts}, etc., provided
-% those packages are read \emph{before} (i.e., prior~to) reading this package.
-% Some types of macros are hardwired to Computer Modern fonts,
-% e.g., the ``\kern-.08em\AmS\kern.02em''~logo and would
-% have to be redefined.
-% The fonts~\texttt{msam} and~\texttt{msbm} will, or course, still be used
-% for the more uncommon math symbols.
-% See below about math accents.
-%
-% The default \TeX~math setup treats upper case Greek letters
-% as mathematical ``letters'' and lower case Greek letters
-% as mathematical ``symbols''. Hence |\mathbf{\Gamma\gamma}|
-% produces a bold upper case~$\mathbf\Gamma$, but 
-% does not affect the lower case~$\gamma$; similarly for~\cs{mathit}.
-% This package uses the same conventions as the \AmS~macros:
-% names like ``\cs{varGamma}'' are used
-% for italic upper case Greek~($\mathit{\Gamma}$), and math version
-% switching is needed (\cs{boldsymbol}) to get bold Greek.
-% The `legacy' input code
-% |\mathbf{\Delta}\mathit{\Gamma}|~(``$\mathbf{\Delta}\mathit{\Gamma}\,$'')
-% \emph{does not work} with the \AmS~\LaTeX~macros nor with this package.
-% See~Sec.\,\ref{ACCs} about accents in math.
-%
-% It is likely that other math font related packages can
-% co-exist with~\pkg{mt11p}, particularly if they merely add
-% a math alphabet or symbol font, e.g., \pkg{mathbbol},
-% \pkg{stmaryrd} or~\pkg{wasysym}. The chances of running out
-% of math symbol font families are slim unless you also
-% load the \pkg{oldlfont}~package. Note that
-% the \AmS{} symbol packages need two math families.
-% Of course it makes no
-% sense to use \pkg{mt11p}~together with another
-% complete math setup package like~\pkg{euler}.
-%
-% One package that \emph{will} clash with~\pkg{mt11p} is~\pkg{yhmath}.
-% If you load that package after~\pkg{mt11p}, all \texttt{largesymbols}
-% in all math versions
-% will be taken from the fixed size font~\texttt{yhcmex10};
-% loading~\pkg{yhmath} before~\pkg{mt11p} will break~\pkg{yhmath}'s
-% wide math accents. If you only need the extra-wide accents,
-% change all instances of the word ``\textsf{largesymbols}'' in the
-% file~\file{yhmath.sty}
-% to something else, e.g.,~\textsf{YHlargesymbols}, and input that altered
-% file. If you want the extra delimiter sizes, you're on your own, but
-% see the paragraph ``Declaring additional math delimiters'' towards the end
-% of the commented source code.
-%
-% \subsection{Math Accents}\label{ACCs}
-%
-% MathT\i me provides an additional accent called
-% \cs{widebar} or~\cs{overbar}. It's about~$1\mathrm{em}$~long.
-% If the \AmS{} macros \cs{Hat}, etc., are defined, we also
-% define the similar \cs{Overbar} and~\cs{Widebar}.
-%
-% The Computer Modern layout causes some encoding-related
-% problems with math accents and math alphabets.
-% NFSS~has hooks to fix the problems, but does not actually
-% do it; the \AmS{} package~\pkg{amsmath}
-% does fix them by redefining most math accents.
-%
-% \pkg{mt11p}~incorporates fixes similar to the \AmS~ones,
-% and overwrites any existing math accent
-% definitions (it pretty much has to), so that
-% any combination of math alphabets and accents
-% (and accents options: \texttt{opaccents} or~\texttt{symaccents})
-% will output the expected glyphs. Some curious combinations
-% will, however, lead to odd-looking accent positioning.
-% In a construct such as |\mathit{\hat{x}}|
-% the accent positioning will always be ``wrong'', because
-% the accent is a \emph{text} accent---the (text) italic font
-% implied by \cs{mathit} doesn't have the appropriate font metrics
-% because it's assumed that \cs{mathit} will be used when a
-% group of letters (a~`word') is to be treated as
-% a math symbol, e.g., $x_{\mathit{initial}}$
-% or~$\widehat{\mathit{final}}$.
-% However, ``$x$''~is a mathematical symbol by itself. If you want
-% an italic hat on the symbol~$x$ you have to say
-% |\mathit{\hat{\mathnormal{x}}|
-% (assuming it's a big deal to have an italic~\cs{hat}\ldots).
-% Even then the spacing will not be optimal and
-% will usually require some fiddling with the \cs{skew} macro.
-%
-% \subsection{Script and calligraphy math fonts}\label{Script}
-% This package makes the distinction between two
-% ``calligraphy'' math alphabets: \emph{calligraphy} and
-% \textit{script}. This is necessitated by the fact that
-% the Computer Modern fonts only have upper case
-% ``calligraphy'' letters, and that you perhaps may not like
-% the MathT\i me \texttt{mtms}*~fonts or that you
-% may want to use letters from both fonts.
-%
-% Irrespective of the options in use, the two math alphabet
-% commands \cs{mathcal} and \cs{mathscr} will be defined.
-% (The old ``\cs{mit}''~is not defined.)
-%
-% The default (\texttt{mtcal})~is to make both alphabets
-% refer to a \texttt{mtms}*~font. The variant
-% forms of some letters are available with the commands
-% \cs{varA}, \cs{varE}, \cs{varG}, \cs{varvarG}, \cs{varI}, \cs{varL},
-% \cs{varQ}, \cs{varS}, \cs{varr}, \cs{varz},
-% \cs{iscript} and~\cs{jscript}. (\cs{i}~and \cs{j}~are
-% invalid in math mode and \cs{imath} and~\cs{jmath}
-% cannot be redefined.) Both upper and lower case letters
-% will work in~\cs{mathcal}.
-%
-% Another possibility, \texttt{cmcal}, is to
-% have both Computer Modern and
-% MathT\i me fonts available; \cs{mathscr}~will 
-% be the latter, and \cs{mathcal} the former.
-% \cs{mathcal} will then not have lower case letters.
-%
-% A third setting, \texttt{nomtms},~avoids using the
-% MathT\i me \texttt{mtms}*~fonts entirely.
-% \cs{mathcal}~is then the Computer Modern symbols font,
-% and \cs{mathscr} gives a warning before calling~\cs{mathcal}.
-%
-% A certain amount of ``reasonableness'' is assumed with respect
-% to the usage of ``calligraphic'' alphabets.
-% The \texttt{mtcal}~option does not give any warning
-% about the fact that \cs{mathcal} and \cs{mathscr}
-% are identical. With the \texttt{cmcal} or \texttt{nomtms}
-% options in effect you will get warnings if you try to use
-% a~\cs{var}\kern-.035em\textit{X\/} letter in~\cs{mathcal}, but
-% \cs{mathcal} will never try to check its argument
-% to verify that it consists of \emph{upper} case letters only, even
-% when no font with ``calligraphy'' lower case letters
-% is available. Consider using \cs{mathcal} when the argument
-% is known to contain nothing but upper case letters and
-% use \cs{mathscr} when using lower case letters as well;
-% that way you will at least get a warning pertaining to
-% script math alphabets if the options are
-% set to avoid the use of~\texttt{mtms}* or if
-% the document is reset without MathT\i me fonts.
-% 
-% 
-% The MathT\i me manuals describe a \cs{script} macro;
-% \pkg{mt11p}~defines an equivalent macro. Note that
-% \cs{script} should only be followed by white space, an 
-% optional~``\texttt*'', and then a single letter,
-% with no space between the asterisk and the letter, e.g.,
-% \verb*+\script *AB+ is equivalent to
-% |\mathscr{\varA}B|, \emph{not}~|\mathscr{AB}|,
-% and \verb*+\script* AB+ is an error.
-%
-% \subsection{The symbols \dag, \ddag, \S, and \P}\label{8R}
-% The standard \LaTeX~setup takes these symbols, in both text and math
-% from the Computer Modern symbols font. The MathT\i me symbols
-% font does not have these glyphs, so something must be done
-% to have them available for footnote markers,~etc.
-%
-% There is a fairly standard \textsc{Post\-Script} text
-% symbol font setup, which uses the \texttt{TS1}~encoding,
-% but it seems to not (yet) be in general use.
-%
-% This package offers three relevant options. The option
-% \texttt{nodag}~does absolutly nothing with the four symbols,
-% but this can only be used if they've already been or are about to be
-% redefined (perhaps in the \file{mt11p.cfg} file),
-% because the default definitions assume the use
-% of Computer Modern fonts and \emph{will} produce incorrect glyphs
-% after switching to MathT\i me. 
-%
-% The default option \texttt{do8r} 
-% takes these four symbols (and \emph{only}
-% these four symbols) from the ``raw'' \texttt{8r}~encoded
-% fonts, upon which the virtual \texttt{T1} and \texttt{OT1}
-% \textsc{Post\-Script} fonts are built. If \file{.fd}~files
-% or an~\file{8r.sty} are available, we use them; if they're not, we supply
-% just enough code to be able to use the symbols in NFSS\@.
-% It is not unreasonable to do so, because the \texttt{8r}~metric
-% file~\file{ptmri8r.tfm} must be on the system (the 
-% \file{mtmi.vf} virtual font uses it), so the
-% upright font~\file{ptmr8r.tfm} is probably available too.
-% Note that \texttt{8r}~is an ``unsupported'' encoding.
-%
-% The option \texttt{no8r} overwrites any existing definition
-% and forces the use of Computer Modern for these four symbols 
-% (without affecting anything else) and avoids the direct use of
-% \texttt{8r}~raw fonts.
-%
-% \subsection{``New'' symbols}
-% {\sloppy
-% MathT\i me has a few mathematical symbols that aren't available
-% in Computer Modern. Here is the list, with alternate names
-% in parentheses:
-% \cs{overbar}~(\cs{widebar}),
-% \cs{openclubsuit},
-% \cs{shadedclubsuit},
-% \cs{openspadesuit},
-% \cs{shadedspadesuit},
-% \cs{triangleleft},
-% \cs{triangleright},
-% \cs{cupprod},
-% \cs{capprod},
-% \cs{varcirc}~(\cs{comp}).}
-%
-% \subsection{Avoiding the use of bitmap fonts}
-% Often the point of buying the MathT\i me fonts is not
-% just to get something other than Computer Modern math, but also
-% to avoid the use of bitmap (Type\,3) fonts and
-% use scalable (Type\,1) fonts nstead. The default option are
-% set so that this condition is satisfied, as long as you
-% don't use glyphs that are not available
-% in either the resident fonts nor in MathT\i me, i.e.,
-% oldstyle digits, or you force the use of
-% Computer Modern or other \textsc{Meta\-Font}
-% fonts in some situations (the \texttt{cmcal},
-% \texttt{nomtms}, or~\texttt{no8r} options, \AmS~packages, etc.) and
-% you do not have substitute outline fonts. See the
-% MathT\i me licence agreement about ``exporting''
-% files containing outline fonts.
-%
-% \subsection{Subscript spacing}\label{SB}
-% The sidebearings of math italic letters with descenders
-% are such that a spacing adjustment is required
-% in certain contexts, in particular in the very common
-% case of~$j$ subscripts. The MathT\i me
-% distribution suggests using an active subscript character,
-% which checks if the first thing in a subscript is
-% one of the letters \texttt{f}, \texttt{j} or~\texttt{p},
-% and inserts a small negative kern if is it.
-% The macro \cs{jadjust} can be used if the correction
-% needs to be done by hand; see Appendix~B.2 of the
-% MathT\i me \textit{Reference Manual}.
-%
-% Changing category codes is akin to Russian roulette: we can
-% try to make the magazine larger, but it will still hold
-% a bullet \textit{somewhere}. It is unreasonable to
-% assume that other people's packages will
-% take steps to work even when the \texttt{underscore}
-% is a macro. \texttt{underscore}s can crop up
-% in font names or reference labels, for example.
-%
-% The macro we use is slightly different from the original one
-% in the MathT\i me distribution. The \cs{catcode} of
-% the \texttt{underscore} ends up being~$12$, i.e., ``other''
-% rather than~$13$~(``active''), which is much more forgiving.
-% We rely on the fact that the
-% \texttt{underscore}'s \cs{mathcode} is \texttt{"8000}
-% to get subscripts in math mode. This seems to be~\textsc{ok}
-% when used in most contexts. In text mode this will
-% produce whatever the current font has in slot~|`\_|, but
-% you shouldn't be using a `naked'
-% \texttt{underscore} in text anyway\ldots{}
-%
-% Nothing is done with the \texttt{underscore} unless
-% its \cs{catcode} is ``subscript''~($8$),
-% \emph{and} its \cs{mathcode} is~\texttt{"8000}; if
-% both conditions are not fulfilled, someone has
-% presumably already fiddled with the \texttt{underscore},
-% so we don't touch it.
-%
-% The option~\texttt{noactivesb} keeps the underscore as it was,
-% in order to quickly ascertain whether the active
-% \texttt{underscore} is braking some macros. Reports of
-% such cases are welcome.
-%
-% \subsection{Upright Greek lower case letters}
-% \label{par:mathgr}
-% MathT\i me contains an upright Greek letters (text)
-% which are used in some disciplines to designate
-% units or particles. Such letters are normally not used
-% as math \textit{symbols}. We provide three relevant commands:
-% \textbf{\cs{greekshape}},~which is a font switch like~\cs{itshape}),
-% \textbf{\cs{textgr}},~which takes an argument similarly to~\cs{textit},
-% and the math alphabet command~\textbf{\cs{mathgr}}.
-%
-% Alternate forms of some letters can be obtained as
-% ligatures---see Section~8 of the \textit{MathT\i me\/}\textsc{plus}
-% reference manual. However, in math (\cs{mathgr})
-% it is not possible to use
-% the ligatures with the asterisk character~(\texttt*) suggested
-% in the manual, because the asterisk will not be interpreted as
-% a character from the same font as the Greek letters.
-% The TFM~metric files accompanying this package contain extra ligatures
-% which produce the variants: in lieu of~\texttt{O*} or~\texttt{o*},
-% write~\texttt{vO} or~\texttt{vo}, respectively; in place
-% of~\texttt{e*} write~\texttt{vev}.
-%
-% This package does not define any \cs{gr}~font switch. \cs{greekshape}
-% performs the same function in text; use the \cs{mathgr}~form
-% in math.
-%
-% MathT\i me\textsc{plus} comes with two ``hybrid'' fonts,
-% \texttt{mtmub} and \texttt{mtmuh}, which
-% are math~\texttt{letters} fonts with upright
-% (instead of sloping) lower case Greek letters. The
-% two fonts contain both upright and italic \emph{upper case}
-% Greek letter. For reasons listed in the reference
-% manual, there is no font~\file{mtmu}. This package comes with
-% a \file{mtmu}~font,  created as a~\file{VF} using 
-% \file{mtmi} and~\file{mtgu}, in case you decide to
-% use such a font after all.
-%
-% See the commented source
-% about declaring upright Greek letters
-% as math \textit{symbols} and about using~\file{mtgu}.
-%
-% \subsection{Oldstyle Digits}\label{OSdig}
-% None of the ``standard\,35'' \textsc{Post\-Script}
-% fonts has oldstyle digits (\oldstylenums{1234567890})
-% and neither do any of the MathT\i me fonts.
-% The standard \TeX~math \texttt{letters}~font
-% has such digits, and some packages make use of the glyphs.
-% \pkg{mt11p}~defines an
-% \cs{oldstylenums}~macro which is essentially equivalent to the
-% one provided in \LaTeX, but note that the Computer Modern
-% oldstyle digits don't go well with Times text fonts.
-% A \file{mt11p.cfg}~file or a subsequent package could redefine
-% the macro to use a more suitable font.
-%
-% \subsection{Mixing math versions}
-% Like both the standard \TeX{} math setup and the \AmS~math
-% setup, we assume that it will be relatively rare to require
-% bold~(unbold) \emph{symbols}\footnote{%
-% The arguments of \cs{mathbf} are not
-% considered `symbols'. The input text \cs{mathbf\{a\}}
-% produces a bold \emph{upright}~``$\mathbf a$'' not
-% the bold math symbol~``{\boldmath$a$}''.}
-% in a formula set in the unbold~(bold) math version.
-% We load the \AmS~\pkg{amsbsy} package which defines
-% a \cs{boldsymbol}~macro, that sets its argument
-% using the bold math version, and define corresponding
-% corresponding \cs{heavysymbol} and
-% \cs{normalsymbol}~macros.
-%
-% However, it's awkward
-% to use the \cs{boldsymbol}, etc., macros in situations
-% where alignment is critical (accents) or for
-% large delimiters. For those cases one could declare
-% additional symbol fonts and define things like
-% \cs{boldalpha}, \cs{boldhat} or \cs{Lheavybrace}, and then
-% an input text like
-% \begin{center}
-% |\[\left\Lheavybrace 2\boldalpha|%
-% $\langle\!\hbox{\itshape some big formula}\rangle$%
-% |\right\Rheavybrace\]|
-% \end{center}
-% would do what would otherwise
-% take unreadable input code (\cs{vphantom} constructs) to produce.
-% This requires some knowledge of the
-% details of \TeX's math workings, but nothing
-% too esoteric. For a simple example
-% the commented source code. Such a setup could be placed
-% in~\file{mt11p.cfg}. Consult also the standard \LaTeX{}
-% documentation file~\file{fntguide.tex}. Note that
-% the \AmS~macros do not provide such a setup, because
-% it's somewhat rare to actually need it, but it can be done.
-%
-% \subsection{Local Configuration}
-% After setting everything up but before `undefining'
-% internal auxiliary macros and flags,
-% and before changing the subscript
-% sizing this package inputs the file~\file{mt11p.cfg}, if
-% it can find one. Further definitions (bold or
-% upright Greek letters as symbols, etc.\@) could be placed in
-% such a file.
-%
-% \section{Bugs}
-% Any reports about bugs, suspected bugs or package
-% clashes are welcome provided you also send just enough
-% \TeX~code to reproduce the bug and your \TeX{}
-% \file{.log}~file---use the e-mail
-% address given on the title page of this document and
-% at various places in the files.
-% Report of \emph{usage} are also welcome\texttt{\small;-)}.
-%
-% \section{Acknowledgment \&{} Misc.}\label{ack}
-%
-% {
-% \setlength{\parindent}{0pt}
-% \setlength{\parskip}{1.0ex plus 0.5ex minus 0.5ex}
-% \raggedright
-% This section has been put here, in case you don't print out the
-% commented source code.
-%
-% Thanks to the authors and maintainers of \LaTeX, and particularly
-% to the authors of NFSS\@. 
-%
-% Portions of this package were stolen from the \pkg{mathtimy}~package
-% by Aloysius Helminck, and from the \TeX~files provided with the
-% MathT\i me distribution.
-%
-% The ``operative'' part of this package was written before
-% the release of the \pkg{mathtime} package by Y\&Y\@.
-%
-% \small
-% MathT\i me is a trademark of Publish or Perish, Inc.
-%
-% A bunch of other names are trademarks or
-% registered trademarks, as everybody knows\ldots
-%
-% The contact address for Y\&Y is\\
-% \begin{quote}
-% Y\&Y, Inc.\\
-% 106 Indian Hill\\
-% Carlisle, MA 01741\\
-% USA\\
-% \texttt{http://www.yandy.com}
-% \end{quote}
-%
-% This software is provided ``\textsc{as-is}'', with no warranty
-% of any kind; the user assumes all responsibility for its use.
-% }
-%
-% \noindent The author has no association with Y\&Y,\,Inc., other than
-% having purchased the MathT\i me fonts.
-%
-% \StopEventually{}
-% \bigskip
-% \hrule height0.6pt\relax
-%
-% \section{Implementation}
-% We start by the usual identifications. We need a few commands
-% not present in early versions of~NFSS\,2, so check for the date.
-%    \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}[1994/12/01]
-\ProvidesPackage{mt11p}%
-        [\filedate: setup\space for\space Times\space
-         +\space MathTime\space +\space MathTimePlus]
-%    \end{macrocode}
-% Before we do anything real,
-% check the catcodes of a few characters in case some fanatic
-% changed them already. These are the characters I've
-% seen activated in various packages.
-% 
-% We hope the the single left quote wasn't\ldots
-%    \begin{macrocode}
-\chardef\mt@quotedbl   \catcode`\"
-\chardef\mt@quotesinglr\catcode`\'
-\chardef\mt@colon      \catcode`\:
-\chardef\mt@question   \catcode`\?
-\chardef\mt@semicolon  \catcode`\;
-\chardef\mt@exclam     \catcode`\!
-\@makeother\"
-\@makeother\'
-\@makeother\:
-\@makeother\?
-\@makeother\;
-\@makeother\!
-%    \end{macrocode}
-% 
-% \subsection{Option Declarations}
-% We will need the option setting in conditionals at various points,
-% so use integers (\cs{chardef}s) as flags.
-%
-% There are three options relevant to text font encodings:
-% either make the default \texttt{T1},
-% or make the default~\texttt{OT1},
-% or don't touch \cs{encodingdefault}. The upright
-% ``roman'' (\cs{rmdefault}) is used for
-% the \texttt{operators}~math family, so the choice
-% of text encoding has implications for math.
-% This package can handle (in as much as it needs to) with
-% any of the following: \texttt{T1}, \texttt{OT1} or a superset thereof,
-% \texttt{8r} and~\texttt{8a}. See the commented source
-% code if you need more information,~Sec.\,\ref{fromops}.
-%    \begin{macrocode}
-\DeclareOption{T1}{\def\mt@enc{\def\encodingdefault{T1}}}
-\DeclareOption{OT1}{\def\mt@enc{\def\encodingdefault{OT1}}}
-\DeclareOption{noenc}{\let\mt@enc\relax}
-%    \end{macrocode}
-%
-% Next the options for dealing with what math symbols to
-% take from the \texttt{operator} family.
-% Either take everything from elsewhere,
-% or take `safe' things from \texttt{operators},
-% or take as much as possible from \texttt{operators}, which could be
-% dangerous in some circumstances; see~Sec.\,\ref{fromops}\@.
-%    \begin{macrocode*}
-\DeclareOption{opnone}{\chardef\mt@ops0 }
-\DeclareOption{opsafe}{\chardef\mt@ops1 }
-\DeclareOption{opmax}{\chardef\mt@ops2 }
-%    \end{macrocode*}
-%
-% Accents can either come from \texttt{operators} and follow
-% math alphabets (usual case),
-% or be always taken from \texttt{symbols}.
-%    \begin{macrocode*}
-\DeclareOption{opaccents}{\chardef\mt@accs0 }
-\DeclareOption{symaccents}{\chardef\mt@accs1 }
-%    \end{macrocode*}
-%
-% We need options to control the handling of 
-% script/calligraphy fonts.
-%    \begin{macrocode*}
-\DeclareOption{mtcal}{\chardef\mt@cal0 }
-\DeclareOption{cmcal}{\chardef\mt@cal1 }
-\DeclareOption{nomtms}{\chardef\mt@cal2 }
-%    \end{macrocode*}
-% 
-% In order to cooperate with \AmS~macros,
-% we provide a switch to \emph{not} define~\cs{hbar},
-% i.e., retain the present definition~(if~any).
-% You may want to use this to keep~\cs{hbar}
-% pointing to the glyph in the \texttt{msbm}~fonts,
-% rather than use the faked one we define here,
-% though then you'll have a Computer Modern~``$h$''
-% which looks too light among Times, and the one provided
-% herein isn't too shabby\ldots
-%    \begin{macrocode*}
-\DeclareOption{dohbar}{\chardef\mt@hbar1 }
-\DeclareOption{nohbar}{\chardef\mt@hbar0 }
-%    \end{macrocode*}
-%
-% The \texttt{bold} and \texttt{heavy} math versions
-% will probably need some font substitutions, but if you
-% have the additional fonts, you can skip the substitutions
-% contained herein.
-%    \begin{macrocode*}
-\DeclareOption{subs}{\chardef\mt@sub1 }
-\DeclareOption{nosubs}{\chardef\mt@sub0 }
-%    \end{macrocode*}
-%
-% For historical reasons the~\cs{dag}\@, \cs{ddag}\@,
-% \cs{S}~and \cs{P}~symbols have to be dealt with.
-% The \texttt{mtmi} virtual fonts use \texttt{ptmi8r}
-% raw fonts, so at least
-% the TFM~files should be available, and we include just enough
-% code to use them for these four symbols.
-% Provide an option to explicitly avoid using \texttt{8r}~for
-% these symbols; in that case we'll have to use \texttt{OMS}\@.
-% A subsequent package could redefine them to use
-% the \texttt{TS1}~encoding or something.
-% Also provide an option that does nothing at all
-% with any of the relevant definitions.
-%    \begin{macrocode*}
-\DeclareOption{no8r}{\chardef\mt@eightR0 }
-\DeclareOption{do8r}{\chardef\mt@eightR1 }
-\DeclareOption{nodag}{\chardef\mt@eightR2 }
-%    \end{macrocode*}
-%
-% It may be convenient to get the \cs{boldsymbol}
-% macro from the \AmS~style files.
-%    \begin{macrocode*}
-\DeclareOption{nobsy}{\chardef\mt@bsy0 }
-\DeclareOption{bsy}{\chardef\mt@bsy1 }
-%    \end{macrocode*}
-%
-% Before exiting this package should reset the
-% subscript sizing, because we're using linearly scaled fonts.
-% Provide an option to switch that off.
-%    \begin{macrocode}
-\DeclareOption{resize}{\def\mt@exit{\MathTimeSizes}}
-\DeclareOption{noresize}{\let\mt@exit\relax}
-%    \end{macrocode}
-%
-% This is mainly to test if the active underscore
-% is causing any problems.
-%    \begin{macrocode*}
-\DeclareOption{activesb}{\chardef\mt@sb1 }
-\DeclareOption{noactivesb}{\chardef\mt@sb0 }
-%    \end{macrocode*}
-%
-% Now a few options to save math families. The default leaves room
-% for four, which may be too little if you also load \AmS, etc.
-%    \begin{macrocode*}
-\DeclareOption{nomathgr}{\chardef\mt@mgr0 }
-\DeclareOption{mathgr}{\chardef\mt@mgr1 }
-\DeclareOption{nomathOS}{\chardef\mt@osdg0 }
-\DeclareOption{mathOS}{\chardef\mt@osdg1 }
-%    \end{macrocode*}
-%
-% The package to get ``Times/Helvetica/Courier'' might
-% have some wiered name:
-%    \begin{macrocode}
-\DeclareOption{times}{\def\times@style{times}}
-\DeclareOption*{\edef\times@style{\CurrentOption}}
-%    \end{macrocode}
-%
-% The defaults are
-% \begin{itemize}
-% \item \texttt{T1} encoding;
-% \item assume the text font package is called \file{times.sty};
-% \item use \texttt{operators} for safe glyphs and accents;
-% \item use \texttt{mtms} as the \cs{mathcal} font;
-% \item declare substitutions for the bold and heavy math versions;
-% \item overwrite any existing definition of \cs{hbar};
-% \item use \texttt{8r} for \cs{dag}\@, etc.;
-% \item fetch the \cs{boldsymbol} \AmS~macro;
-% \item get upright Greek and oldstyle digits;
-% \item switch to different subscript sizing; and
-% \item use the active underscore character.
-% \end{itemize}
-% Then read the option list.
-%    \begin{macrocode}
-\ExecuteOptions{T1,times,opsafe,opaccents,mtcal,%
-                dohbar,subs,do8r,bsy,resize,mathgr,mathOS,activesb}
-\ProcessOptions*
-%    \end{macrocode}
-%
-% \subsection{Text Encoding}
-% We have to know that the text \cs{encodingdefault} is, because accents in math mode
-% may get taken from the \texttt{operators} font. We make \cs{encodingdefault}
-% either \texttt{T1} (default, and preferred), or \texttt{OT1}\@, or
-% do nothing with \cs{encodingdefault}\@.
-%    \begin{macrocode}
-\mt@enc
-%    \end{macrocode}
-%
-% \subsection{Text font setup}
-% Here we fetch ``Times +~Helvetica +~Courier'' using the \pkg{times} package,
-% or whatever we were told to use, or just do it by hand. On exit
-% \cs{rmdefault}\@, \cs{sfdefault} and \cs{ttdefault}
-% should be~\textsc{ok}.
-%    \begin{macrocode}
-\IfFileExists{\times@style.sty}%
-        {\RequirePackage{\times@style}}%
-        {\PackageWarning{mt11p}{No file `\times@style.sty' found.%
-                                \MessageBreak
-                                Guessing what the text
-                                font familes \MessageBreak
-                                are called}
-         \renewcommand{\sfdefault}{phv}
-         \renewcommand{\rmdefault}{ptm}
-         \renewcommand{\ttdefault}{pcr}
-         \renewcommand{\bfdefault}{b}}
-%    \end{macrocode}
-%
-% \subsection{Font Sizing} The documentation accompanying MathT\i me
-% suggests different subscript sizing. We do it the same way
-% the \pkg{mathtimy} package does it, by redefining things like
-% \cs{@ixpt} to actually be something other than what the name implies.
-% Then we reset all math sizes, from \cs{tiny} to \cs{Huge}\@.
-% This is the sizing used in \pkg{mathtimy}\@, which appeares to be
-% taken from the files in the MathT\i me distribution. This macro
-% gets called just before we exit. Switching between MathT\i me~sizing
-% and the default Computer Modern~sizing on the fly makes little sense,
-% so we don't try to preserve the original settings.
-% The standard sizes are, in sequence, 5, 6, 7, 8, 9, 10, 10.95,
-% 12, 14.4, 17.28, 20.74~and 24.88~points, i.e., we decrease the
-% `spread' somewhat.
-%    \begin{macrocode}
-\def\MathTimeSizes{%
-  \def\@vpt{6.0}%
-  \def\@vipt{6.8}%
-  \def\@viipt{7.6}%
-  \def\@viiipt{8.4}%
-  \def\@ixpt{9.2}%
-  \def\@xpt{10.0}%
-  \def\@xipt{10.8}%
-  \def\@xiipt{11.6}%
-  \def\@xivpt{13.2}%
-  \def\@xviipt{15.6}%
-  \def\@xxpt{18.0}%
-  \def\@xxvpt{22.0}%
-  \DeclareMathSizes\@vpt   \@vpt   \@vpt   \@vpt
-  \DeclareMathSizes\@vipt  \@vipt  \@vpt   \@vpt
-  \DeclareMathSizes\@viipt \@viipt \@vpt   \@vpt
-  \DeclareMathSizes\@viiipt\@viiipt\@vipt  \@vpt
-  \DeclareMathSizes\@ixpt  \@ixpt  \@vipt  \@vpt
-  \DeclareMathSizes\@xpt   \@xpt   \@viipt \@vpt
-  \DeclareMathSizes\@xipt  \@xipt  \@viipt \@vpt
-  \DeclareMathSizes\@xiipt \@xiipt \@viiipt\@vipt
-  \DeclareMathSizes\@xivpt \@xivpt \@xpt   \@viipt
-  \DeclareMathSizes\@xviipt\@xviipt\@xiipt \@xpt
-  \DeclareMathSizes\@xxpt  \@xxpt  \@xivpt \@xiipt
-  \DeclareMathSizes\@xxvpt \@xxvpt \@xxpt  \@xviipt
-  \PackageInfo{mt11p}{Adjusting math subscript sizing}}
-%    \end{macrocode}
-%
-% \subsection{Fetch the MathT\i me and MathT\i me\textsc{plus} fonts.}
-% We don't create \texttt{.fd}~files,
-% since the fonts are not for general use.
-% We declare them as separate encodings, called \texttt{Lmt}*,
-% because they differ quite
-% a bit from the \texttt{OM}* encodings, which might lead to trouble if,
-% e.g., someone assumed the \texttt{letters}
-% font has oldstyle digits or that the \texttt{symbols}
-% font has calligraphic letters.
-%
-% There will be a \emph{heavy} series for some fonts, which we denote by
-% the macro \cs{hvdefault}, and an upright italic
-% shape, \cs{uidefault}. For the bold and heavy math versions
-% we would need additional bold, \emph{ultra}~(\cs{uldefault}) and
-% \emph{poster}~(\cs{psdefault}) weight fonts;
-% pretend they exist, and then define substitutes.
-% For the off chance that these are already
-% defined, we ``provide'' them, rather than define them.
-% Only the macros are used in the rest of this file, i.e.,
-% ``|{ui}|'' never appears again, so no font designations are
-% hardwired into this file (except those for common Computer Modern fonts).
-%    \begin{macrocode}
-\providecommand{\hvdefault}{h}
-\providecommand{\uidefault}{ui}
-\providecommand{\uldefault}{u}
-\providecommand{\psdefault}{p}
-%    \end{macrocode}
-%
-% \paragraph{Letters} Declare the \texttt{letters} fonts.
-% Include \cs{noaccents@} so math accents don't break in
-% \cs{mathnormal}.
-%    \begin{macrocode*}
-\DeclareFontEncoding{LmtL}{}{\noaccents@}
-\DeclareFontFamily{LmtL}{mtl}{\skewchar\font=45 }
-\DeclareFontShape{LmtL}{mtl}{\mddefault}{\itdefault}{<->mtmi}{}
-\DeclareFontShape{LmtL}{mtl}{\bfdefault}{\itdefault}{<->mtmib}{}
-%    \end{macrocode*}
-%    \begin{macrocode}
-\DeclareFontShape{LmtL}{mtl}{\hvdefault}{\itdefault}{<->mtmih}{}% see dtx SUBS
-%    \end{macrocode}
-% Note that the font~\texttt{mtmih} is a virtual font that
-% uses~\texttt{ptmbi8r}, so even if you have a ``heavy''
-% weight Times italic font, you can't use it as a math
-% \texttt{letters} font unless you know how to
-% create a suitable raw font and change~\file{mtmih.vf}
-% and~\file{mtmih.vf}. The same applies to~\file{mtmuh}.
-%
-% Declare the \texttt{letters} font with upright lower case Greek letters too; we won't
-% do anything with them, but we will describe how to set them up, if someone
-% wants to use them as symbols~(Sec.\,\ref{unused}).
-%    \begin{macrocode}
-\DeclareFontShape{LmtL}{mtl}{\mddefault}{\uidefault}{<->mtmu}{}
-\DeclareFontShape{LmtL}{mtl}{\bfdefault}{\uidefault}{<->mtmub}{}
-\DeclareFontShape{LmtL}{mtl}{\hvdefault}{\uidefault}{<->mtmuh}{}
-%    \end{macrocode}
-%
-% \paragraph{Symbols} Now the \texttt{symbols} font:
-%    \begin{macrocode}
-\DeclareFontEncoding{LmtS}{}{\no@accents}%
-\DeclareFontFamily{LmtS}{mts}{}% the fonts have no skewkerns
-%    \end{macrocode}
-% Why do we say \cs{no@accents} when this is the \emph{one} font that
-% \emph{will} have accents if we don't find any elsewhere?---because
-% they are in non-standard slots. There is no ``\cs{mathsy}''
-% alphabet, but someone could try to be clever and define
-% one. Since we said \cs{noaccents@}, we might as well do the following
-% re-declarations (\AmS~does them too).
-%    \begin{macrocode}
-\DeclareFontEncoding{OML}{}{\noaccents@}
-\DeclareFontEncoding{OMS}{}{\noaccents@}
-%    \end{macrocode}
-% \texttt{mtsyn} and the older \texttt{mtsy} differ only in the
-% \texttt{radical1}~glyph
-% (\texttt{C132},~$\mathit{'204}$), which is a surd/radical
-% at the baseline (as opposed to below it),
-% otherwise identical to the other radical sign
-% at~$\mathit{'160}$; see~Sec.\,\ref{realunused}.
-%    \begin{macrocode}
-\DeclareFontShape{LmtS}{mts}{\mddefault}{\updefault}{<->mtsyn}{}
-\DeclareFontShape{LmtS}{mts}{\bfdefault}{\updefault}{<->mtsyb}{}
-\DeclareFontShape{LmtS}{mts}{\hvdefault}{\updefault}{<->mtsyh}{}
-%    \end{macrocode}
-% 
-% \paragraph{Script Letters} The letters-only \texttt{mtms}* fonts, which
-% we use for \cs{mathcal} and/or~\cs{mathscr}.
-%    \begin{macrocode*}
-\DeclareFontEncoding{LmtW}{}{\noaccents@}
-\DeclareFontFamily{LmtW}{mtw}{\skewchar\font=42 \hyphenchar\font=-1 }
-\DeclareFontShape{LmtW}{mtw}{\mddefault}{\updefault}{<->mtms}{}
-\DeclareFontShape{LmtW}{mtw}{\bfdefault}{\updefault}{<->mtmsb}{}
-%    \end{macrocode*}
-%
-% \paragraph{Math Extention}
-% The \texttt{largesymbols} and math extension fonts \texttt{mtex}*
-% are compatible with \texttt{OMX}; the only difference is an extra radical
-% in slot~$\mathit{'237}$, which we don't use, because it is identical
-% to the one in the \texttt{symbols} font~($\mathit{'160}$).
-%    \begin{macrocode}
-\DeclareFontFamily{OMX}{mtx}{}% this really is OMX, thank you
-\DeclareFontShape{OMX}{mtx}{\mddefault}{\updefault}{<->mtex}{}
-\DeclareFontShape{OMX}{mtx}{\bfdefault}{\updefault}{<->mtexb}{}
-\DeclareFontShape{OMX}{mtx}{\hvdefault}{\updefault}{<->mtexh}{}
-%    \end{macrocode}
-%
-% \paragraph{Greek Text} MathT\i me includes a font with
-% upright Greek letters, upper and lower case, meant for
-% use as \emph{letters} (as opposed to \textit{symbols})\@.
-% The fonts have ligatures with empty slots to get
-% alternate forms---see Section~8 of the
-% \textit{MathT\i me\/}\textsc{plus} reference manual.
-%    \begin{macrocode}
-\DeclareFontEncoding{LmtG}{}{\noaccents@}
-\DeclareFontFamily{LmtG}{mtg}{}
-\DeclareFontShape{LmtG}{mtg}{\mddefault}{\updefault}{<->mtgu}{}
-\DeclareFontShape{LmtG}{mtg}{\bfdefault}{\updefault}{<->mtgub}{}
-%    \end{macrocode}
-%
-% Lastly, declare default for the new encodings, so NFSS~is happy.
-%    \begin{macrocode}
-\DeclareFontSubstitution{LmtL}{mtl}{\mddefault}{\itdefault}
-\DeclareFontSubstitution{LmtS}{mts}{\mddefault}{\updefault}
-\DeclareFontSubstitution{LmtW}{mtw}{\mddefault}{\updefault}
-\DeclareFontSubstitution{LmtG}{mtg}{\mddefault}{\updefault}
-%    \end{macrocode}
-%
-% \subsection{Math declarations}
-% We assume the usual math setup was loaded into
-% the format and change things around to use MathT\i me.
-% If for some reason you don't read a standard math setup
-% into the format, you'll have to read the setup in before
-% loading this package. Note that it is not necessary to
-% ``preload'' the standard Computer Modern
-% font metrics, if font memory is a problem.
-%
-% \paragraph{Math Versions}
-% We use three math versions, \textit{normal}\@,
-% \textit{bold}\@, and \textit{heavy}\@, and keep everything separate,
-% as if there really were three sets of fonts available for everything. Actually,
-% they're not, but one could use the hooks to supply such fonts if one had them.
-%
-% Give a notice so people don't freak when they see all the warnings
-% messages NFSS~emits.
-%    \begin{macrocode}
-\PackageWarning{mt11p-Font}{Expect LOTS of NFSS warnings}
-%    \end{macrocode}
-%
-% Some of the code that follows is redundant.
-%    \begin{macrocode}
-\DeclareMathVersion{normal}
-\DeclareMathVersion{bold}
-\DeclareMathVersion{heavy}
-\def\normalmath{\@nomath\normalmath\mathversion{normal}}
-\def\boldmath{\@nomath\boldmath\mathversion{bold}}
-\def\heavymath{\@nomath\heavymath\mathversion{heavy}}
-\def\unboldmath{\normalmath}
-\let\unheavymath\unboldmath
-%    \end{macrocode}
-% This is a private joke\ldots
-%    \begin{macrocode}
-\let\unnormalmath\relax
-%    \end{macrocode}
-%
-% \paragraph{Declare Math Font Families}
-% The following does not depend on any options:
-%    \begin{macrocode}
-\DeclareSymbolFont{operators}{\encodingdefault}%
-                             {\rmdefault}{\mddefault}{\updefault}
-\DeclareSymbolFont{letters}{LmtL}%
-                           {mtl}{\mddefault}{\itdefault}
-\DeclareSymbolFont{symbols}{LmtS}%
-                           {mts}{\mddefault}{\updefault}
-\DeclareSymbolFont{largesymbols}{OMX}%
-                                {mtx}{\mddefault}{\updefault}
-\DeclareSymbolFontAlphabet \mathnormal {letters}
-\DeclareSymbolFontAlphabet \mathrm     {operators}
-\DeclareMathAlphabet \mathbf {\encodingdefault}%
-                             {\rmdefault}{\bfdefault}{\updefault}
-\DeclareMathAlphabet \mathsf {\encodingdefault}%
-                             {\sfdefault}{\mddefault}{\updefault}
-\DeclareMathAlphabet \mathit {\encodingdefault}%
-                             {\rmdefault}{\mddefault}{\itdefault}
-\DeclareMathAlphabet \mathtt {\encodingdefault}%
-                             {\ttdefault}{\mddefault}{\updefault}
-%    \end{macrocode}
-%
-% The calligraphy stuff depends on what `\texttt{cal}' option is being used;
-% we either
-%    use \texttt{mtms} as the \cs{mathcal} font,
-% \textsc{or}
-%    we make \texttt{cmsy} the \cs{mathcal} font
-%    and make \texttt{mtms} a ``script'' font~\cs{mathscr}\@,
-% \textsc{or}
-%    we make \texttt{cmsy} the \cs{mathcal} font
-%    and don't use \texttt{mtms} for anything.
-%    \begin{macrocode}
-\ifcase\mt@cal % case 0
-   \DeclareMathAlphabet \mathcal {LmtW}{mtw}{\mddefault}{\updefault}
-\or            % case 1
-   \DeclareMathAlphabet \mathscr {LmtW}{mtw}{\mddefault}{\updefault}
-   \DeclareMathAlphabet \mathcal {OMS}{cmsy}{m}{n}
-\or            % case 2
-   \DeclareMathAlphabet \mathcal {OMS}{cmsy}{m}{n}
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@cal}%
-                {The \string\mathcal/\string\mathscr setup is hosed.}
-\fi
-%    \end{macrocode}
-% We'll have to deal with more \cs{mathcal}-related stuff later.
-%
-% Note that things 
-% defined via \cs{DeclareSymbolFontAlphabet} switch math versions
-% automatically with \cs{SetSymbolFont}; these include \cs{mathnormal}
-% and \cs{mathrm}.
-%
-% \paragraph{Normal Math Version} This is largely redundant.
-%    \begin{macrocode}
-\SetSymbolFont{operators}{normal}{\encodingdefault}%
-                                 {\rmdefault}{\mddefault}{\updefault}
-\SetSymbolFont{letters}{normal}{LmtL}%
-                               {mtl}{\mddefault}{\itdefault}
-\SetSymbolFont{symbols}{normal}{LmtS}%
-                               {mts}{\mddefault}{\updefault}
-\SetSymbolFont{largesymbols}{normal}{OMX}%
-                                    {mtx}{\mddefault}{\updefault}
-\SetMathAlphabet \mathsf {normal}%
-                {\encodingdefault}{\sfdefault}{\mddefault}{\updefault}
-\SetMathAlphabet \mathtt {normal}%
-                {\encodingdefault}{\ttdefault}{\mddefault}{\updefault}
-\SetMathAlphabet \mathit {normal}%
-                {\encodingdefault}{\rmdefault}{\mddefault}{\itdefault}
-\SetMathAlphabet \mathbf {normal}%
-                {\encodingdefault}{\rmdefault}{\hvdefault}{\updefault}
-%    \end{macrocode}
-% \cs{mathcal} and \cs{mathscr} have several cases.
-%    \begin{macrocode}
-\ifcase\mt@cal % case 0
-   \SetMathAlphabet \mathcal {normal}{LmtW}{mtw}{\mddefault}{\updefault}
-\or            % case 1
-   \SetMathAlphabet \mathscr {normal}{LmtW}{mtw}{\mddefault}{\updefault}
-   \SetMathAlphabet \mathcal {normal}{OMS}{cmsy}{m}{n}
-\or            % case 2
-   \SetMathAlphabet \mathcal {normal}{OMS}{cmsy}{m}{n}
-\fi
-%    \end{macrocode}
-%
-% \paragraph{Bold Math Version} Same story as above.
-%    \begin{macrocode}
-\SetSymbolFont{operators}{bold}{\encodingdefault}%
-                               {\rmdefault}{\bfdefault}{\updefault}
-\SetSymbolFont{letters}{bold}{LmtL}%
-                             {mtl}{\bfdefault}{\itdefault}
-\SetSymbolFont{symbols}{bold}{LmtS}%
-                             {mts}{\bfdefault}{\updefault}
-\SetSymbolFont{largesymbols}{bold}{OMX}%
-                                  {mtx}{\bfdefault}{\updefault}
-\SetMathAlphabet \mathsf {bold}{\encodingdefault}%
-                               {\sfdefault}{\bfdefault}{\updefault}
-\SetMathAlphabet \mathtt {bold}{\encodingdefault}%
-                               {\ttdefault}{\bfdefault}{\updefault}
-\SetMathAlphabet \mathit {bold}{\encodingdefault}%
-                               {\rmdefault}{\bfdefault}{\itdefault}
-\SetMathAlphabet \mathbf {bold}{\encodingdefault}%
-                               {\rmdefault}{\uldefault}{\updefault}
-%    \end{macrocode}
-% And the cases
-%    \begin{macrocode}
-\ifcase\mt@cal % case 0
-   \SetMathAlphabet \mathcal {bold}{LmtW}{mtw}{\bfdefault}{\updefault}
-\or            % case 1
-   \SetMathAlphabet \mathscr {bold}{LmtW}{mtw}{\bfdefault}{\updefault}
-   \SetMathAlphabet \mathcal {bold}{OMS}{cmsy}{b}{n}
-\or            % case 2
-   \SetMathAlphabet \mathcal {bold}{OMS}{cmsy}{b}{n}
-\fi
-%    \end{macrocode}
-%
-% \paragraph{Heavy Math Version} Still more of the same.
-%    \begin{macrocode}
-\SetSymbolFont{operators}{heavy}{\encodingdefault}%
-                                {\rmdefault}{\hvdefault}{\updefault}
-\SetSymbolFont{letters}  {heavy}{LmtL}%
-                                {mtl}{\hvdefault}{\itdefault}
-\SetSymbolFont{symbols}  {heavy}{LmtS}%
-                                {mts}{\hvdefault}{\updefault}
-\SetSymbolFont{largesymbols}{heavy}{OMX}%
-                                   {mtx}{\hvdefault}{\updefault}
-\SetMathAlphabet \mathsf {heavy}{\encodingdefault}%
-                                {\sfdefault}{\hvdefault}{\updefault}
-\SetMathAlphabet \mathtt {heavy}{\encodingdefault}%
-                                {\ttdefault}{\hvdefault}{\updefault}
-\SetMathAlphabet \mathit {heavy}{\encodingdefault}%
-                                {\rmdefault}{\hvdefault}{\itdefault}
-\SetMathAlphabet \mathbf {heavy}{\encodingdefault}%
-                                {\rmdefault}{\psdefault}{\updefault}%
-%    \end{macrocode}
-% And the cases for script,
-%    \begin{macrocode}
-\ifcase\mt@cal % case 0
-   \SetMathAlphabet \mathcal {heavy}{LmtW}{mtw}{\hvdefault}{\updefault}
-\or            % case 1
-   \SetMathAlphabet \mathscr {heavy}{LmtW}{mtw}{\hvdefault}{\updefault}
-   \SetMathAlphabet \mathcal {heavy}{OMS}{cmsy}{\hvdefault}{\updefault}
-\or            % case 2
-   \SetMathAlphabet \mathcal {heavy}{OMS}{cmsy}{\hvdefault}{\updefault}
-\fi
-%    \end{macrocode}
-%
-% \subsection{Bold \& heavy font substitutions}
-% We pretended there are all sorts of weights available,
-% but, in fact, they're not. Declare substitutions, unless we were told not to.
-% NFSS~will complain if we use an as-of-yet undeclared font as a substitute, so
-% we explicitly read in the \file{.fd}~files (this happens later
-% for other fonts too). No harm will be done if they
-% have already been read. Read in even \file{OMScmsy.fd}, in case the
-% format has zilch preloaded.
-%
-%    \begin{macrocode}
-\ifcase\mt@sub % case 0
-   \PackageWarning{mt11p}{No math font substitutions set}
-%    \end{macrocode}
-% Check for and read in the files
-%   $\langle$\cs{encodingdefault}$\!\rangle %
-%    \langle$\texttt{\char`\\}\textit{xy\/}\texttt{default}$
-%  \!\rangle$\texttt{.fd} for the three text families.
-% Be nice and check for the all-lower case name too.
-%    \begin{macrocode}
-\or % case 1
-   \def\mt@fd@check#1{%
-          \edef\reserved@a{\lowercase{\noexpand
-                              \InputIfFileExists{\encodingdefault #1.fd}}}%
-          \reserved@a\relax{\InputIfFileExists{\encodingdefault #1.fd}\relax
-                       {\PackageError{mt11p}%
-                         {No file `\encodingdefault#1.fd' found}%
-                         {Your text \string#1 setup looks inconsistent.}}}}
-   \mt@fd@check\rmdefault
-   \mt@fd@check\sfdefault
-   \mt@fd@check\ttdefault
-   \edef\reserved@a{\lowercase{\noexpand\InputIfFileExists{omscmsy.fd}}}%
-   \reserved@a\relax{\InputIfFileExists{OMScmsy.fd}\relax
-                {\PackageError{mt11p}{No OMScmsy.fd file}%
-                         {Your are missing a basic distribution file. %
-                                      Check the LaTeX installation.}}}
-   \DeclareFontShape{\encodingdefault}%
-                    {\rmdefault}{\hvdefault}{\updefault}% heavy \rm SUBS
-                    {<->ssub*\rmdefault/\bfdefault/\updefault}{}
-   \DeclareFontShape{\encodingdefault}%
-                    {\sfdefault}{\hvdefault}{\updefault}% heavy \sf SUBS
-                    {<->ssub*\sfdefault/\bfdefault/\updefault}{}
-   \DeclareFontShape{\encodingdefault}%
-                    {\ttdefault}{\hvdefault}{\updefault}% heavy \tt SUBS
-                    {<->ssub*\ttdefault/\bfdefault/\updefault}{}
-   \DeclareFontShape{\encodingdefault}%
-                    {\rmdefault}{\psdefault}{\updefault}% poster \rm SUBS
-                    {<->ssub*\rmdefault/\bfdefault/\updefault}{}
-   \DeclareFontShape{LmtW}%
-                    {mtw}{\hvdefault}{\updefault}%      heavy mtms SUBS
-                    {<->ssub*mtw/\bfdefault/\updefault}{}
-   \DeclareFontShape{OMS}{cmsy}{\hvdefault}{\updefault}%
-                    {<->ssub*cmsy/b/n}{}%               heavy cmsy SUBS
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@sub}%
-                {No math font substitutions set.}
-\fi
-%    \end{macrocode}
-%
-% \subsection{Mathcodes} The MathT\i me fonts are \emph{nearly}
-% replacements
-% for Computer Modern, but there are a few things to fix up.
-% We also make it possible to take some
-% symbols and accents from either 
-% \texttt{operators} or from elsewhere,
-% depending on the options; this will be done later.
-%
-% \paragraph{\texttt{letters} Font} Upright upper case
-% Greek no longer comes from
-% the \texttt{operators} font, but from the
-% \texttt{letters} font, so
-% upper and lower case Greek letters now behave identically,
-% namely as math symbols.
-% This means that something like
-% |$\mathit{\Delta\Gamma}\mathbf{\Xi}$| no longer
-% works---upper case Greek letters are not affected by math alphabet changes.
-% There is no simple fix.
-%
-% Upright upper case Greek:
-%    \begin{macrocode}
-\DeclareMathSymbol\Gamma      {\mathord}{letters}{'060}
-\DeclareMathSymbol\Delta      {\mathord}{letters}{'061}
-\DeclareMathSymbol\Theta      {\mathord}{letters}{'062}
-\DeclareMathSymbol\Lambda     {\mathord}{letters}{'063}
-\DeclareMathSymbol\Xi         {\mathord}{letters}{'064}
-\DeclareMathSymbol\Pi         {\mathord}{letters}{'065}
-\DeclareMathSymbol\Sigma      {\mathord}{letters}{'066}
-\DeclareMathSymbol\Upsilon    {\mathord}{letters}{'067}
-\DeclareMathSymbol\Phi        {\mathord}{letters}{'070}
-\DeclareMathSymbol\Psi        {\mathord}{letters}{'071}
-\DeclareMathSymbol\Omega      {\mathord}{letters}{'177}
-%    \end{macrocode}
-% Italic upper case Greek; \AmS~calls these
-% \cs{var}$\langle\!\mathit{Greek\;Letter}\rangle$.
-%    \begin{macrocode}
-\DeclareMathSymbol\varGamma   {\mathord}{letters}{'000}
-\DeclareMathSymbol\varDelta   {\mathord}{letters}{'001}
-\DeclareMathSymbol\varTheta   {\mathord}{letters}{'002}
-\DeclareMathSymbol\varLambda  {\mathord}{letters}{'003}
-\DeclareMathSymbol\varXi      {\mathord}{letters}{'004}
-\DeclareMathSymbol\varPi      {\mathord}{letters}{'005}
-\DeclareMathSymbol\varSigma   {\mathord}{letters}{'006}
-\DeclareMathSymbol\varUpsilon {\mathord}{letters}{'007}
-\DeclareMathSymbol\varPhi     {\mathord}{letters}{'010}
-\DeclareMathSymbol\varPsi     {\mathord}{letters}{'011}
-\DeclareMathSymbol\varOmega   {\mathord}{letters}{'012}
-%    \end{macrocode}
-% Lower case Greek letters are \textsc{ok}, except for
-%    \begin{macrocode}
-\DeclareMathSymbol\varkappa   {\mathord}{letters}{'176}
-\DeclareMathSymbol\omicron    {\mathord}{letters}{`\o}% for completeness
-%    \end{macrocode}
-%
-% \paragraph{\texttt{symbols} Font}
-% There are a few new symbols, and the fonts no longer contain
-% calligraphic letters.
-% Easy things (those where no alternatives are available) first; the
-% new names are those used in the MathT\i me distribution.
-%    \begin{macrocode}
-\DeclareMathSymbol\openclubsuit   {\mathord}{symbols}{"78}
-\DeclareMathSymbol\shadedclubsuit {\mathord}{symbols}{"79}
-\DeclareMathSymbol\openspadesuit  {\mathord}{symbols}{"7A}
-\DeclareMathSymbol\shadedspadesuit{\mathord}{symbols}{"7B}
-\DeclareMathSymbol\triangleleft   {\mathbin}{symbols}{"47}
-\DeclareMathSymbol\triangleright  {\mathbin}{symbols}{"46}
-\DeclareMathSymbol\cupprod        {\mathbin}{symbols}{"59}
-\DeclareMathSymbol\capprod        {\mathbin}{symbols}{"5A}
-%    \end{macrocode}
-% The \cs{varcirc} symbol is slightly smaller than the `open bullet'.
-% \pkg{mathtimy} calls it ``\cs{comp}''.
-%    \begin{macrocode}
-\DeclareMathSymbol\varcirc{\mathbin}{symbols}{"42}
-\let\comp=\varcirc
-%    \end{macrocode}
-% \cs{vec} used to be in \texttt{letters}, now it's
-% in \texttt{symbols}\@.
-%    \begin{macrocode}
-\DeclareMathAccent\vec    {\mathord}{symbols}{"45}
-%    \end{macrocode}
-% \texttt{mtsy} has an accent glyph called \texttt{overbar},
-% which \pkg{mathtimy} calls \cs{widebar}\@.
-%    \begin{macrocode}
-\DeclareMathAccent\overbar{\mathord}{symbols}{"53}
-\let\widebar\overbar
-%    \end{macrocode}
-%
-% The glyph called \texttt{backslash} in the AFM~file
-% of~\texttt{mtsyn} is the one usually used for
-% \cs{setminus}\@, and the format file has a definition
-% for it (\texttt{symbols},~slot~|"6E|).
-% There is a \texttt{setminus} in the AFM~file, but it looks
-% somewhat like a tilted minus sign.
-% \AmS~packages call that glyph ``\cs{smallsetminus}''.
-%    \begin{macrocode}
-\DeclareMathSymbol\varsetminus{\mathbin}{symbols}{"58}
-\let\smallsetminus\varsetminus
-%    \end{macrocode}
-%
-% \paragraph{Calligraphic letters and their variants}
-% Irrespective of the options, both \cs{mathcal}
-% and \cs{mathscr} get defined; warn only when
-% the \texttt{nomtms}~option is used.
-%    \begin{macrocode}
-\ifcase\mt@cal % case 0
-   \let\mathscr\mathcal % don't warn
-\or            % case 1
-\or            % case 2
-   \def\mathscr#1{\mathcal{#1}%
-              \PackageWarning{mt11p}{no \string\mathscr\space available;
-                           \MessageBreak using OMScmsy \string\mathcal}}
-\fi
-%    \end{macrocode}
-% We don't try to trap cases like |\mathcal{a}| when
-% the \cs{mathcal} alphabet is~\texttt{OMS} (and hence
-% has no lowercase letters!). Presumably by
-% writing |\mathcal{a}| you know that \cs{mathcal}~is
-% \texttt{LmtW}, i.e., the \texttt{mtcal}~option is in effect.
-% Writing |\mathscr{a}| when \cs{mathscr} is essentially
-% a synonym for~\cs{mathcal} will at least produce a warning.
-%
-% \texttt{mtms}* has alternate forms of a few letters. We define
-% math commands to fetch them, assuming we
-% have an \texttt{mtms}*~font as~\cs{mathscr}.
-% (The script letters have sidebearings which make them
-% unsuitable for text; use math mode for logos and such.)
-% The auxiliary macro will be defined later.
-%    \begin{macrocode}
-\def\varA   {\mt@al@hexsy\mathscr{30}}
-\def\varE   {\mt@al@hexsy\mathscr{31}}
-\def\varG   {\mt@al@hexsy\mathscr{32}}
-\def\varvarG{\mt@al@hexsy\mathscr{33}}
-\def\varI   {\mt@al@hexsy\mathscr{34}}
-\def\varL   {\mt@al@hexsy\mathscr{35}}
-\def\varQ   {\mt@al@hexsy\mathscr{36}}
-\def\varS   {\mt@al@hexsy\mathscr{37}}
-\def\varr   {\mt@al@hexsy\mathscr{38}}
-\def\varz   {\mt@al@hexsy\mathscr{39}}
-\def\iscript{\mt@al@hexsy\mathscr{7B}}% can't use \imath
-\def\jscript{\mt@al@hexsy\mathscr{7C}}% can't use \jmath
-%    \end{macrocode}
-% The MathT\i me
-% distribution defines the macro~\cs{script}, which is
-% supposed to produce the script letter~``A'' and its alternate
-% form with~``|\script A|'' and~``|\script*A|'', respectively.
-% The argument of~\cs{script} had better be
-% a single token (or an asterisk and a single token),
-% else we get a mess; in order to
-% get the expected output that token should be a
-% single~$\mathrm{letter}_{11}$, one of those that have variant forms.
-%    \begin{macrocode}
-\DeclareRobustCommand\script{\@ifstar\@varscript\@script}
-\ifnum\mt@cal<2 % mtms available
-   \def\@script#1{\mathscr{#1}}
-   \def\@varscript#1{%
-               \ifx#1A\varA
-          \else\ifx#1E\varE
-          \else\ifx#1G\varG
-          \else\ifx#1g\varvarG
-          \else\ifx#1I\varI
-          \else\ifx#1L\varL
-          \else\ifx#1Q\varQ
-          \else\ifx#1S\varS
-          \else\ifx#1r\varr
-          \else\ifx#1z\varz
-          \else\ifx#1i\iscript
-          \else\ifx#1j\jscript
-          \else       \PackageWarning{mt11p}{#1: no such variant letter}%
-                                    \mathscr{#1}%
-          \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-\else % OMS only
-   \def\@script#1{\mathscr{#1}}
-   \def\@varscript#1{\PackageWarning{mt11}%
-                             {no variant letters available in OMS}%
-                             \@script{#1}}
-\fi
-%    \end{macrocode}
-% The above will produce \emph{two} warnings if you say |$\mathcal{a}$|
-% with the \texttt{nomtms}~option in effect.
-%
-% \paragraph{Symbols from either \texttt{operators} or from elsewhere}
-% \label{fromops}
-% Many symbols and punctuation marks can be taken from either
-% the \texttt{operators} math family, or from
-% \texttt{letters}/\texttt{symbols}\@. Most of the glyphs
-% are virtually identical in either font. The `optimal' choice
-% depends on several things, e.g., do you wish to use as few glyphs from
-% the MathT\i me fonts as possible, do you prefer `thinner' symbols, etc.
-% The \texttt{opmax} option will take as many things from
-% \texttt{operators} as possible, but
-% risk, e.g., that the $=$~sign will not line up with double
-% arrows,~etc.
-% The \texttt{opsafe}~option uses \texttt{operators}
-% glyphs only when absolutly nothing can go wrong;
-% the \texttt{opnone} option \emph{avoids} \texttt{operators}
-% whenever possible and uses MathT\i me glyphs instead.
-%
-% The \texttt{operators} font is uses the encoding
-% \cs{encodingdefault}. We \emph{must} recognize that encoding
-% in order to take any symbols from \texttt{operators}.
-% The only encodings I know of that someone might possibly be
-% using with \LaTeXe{} are
-% \texttt{T1}\@, \texttt{OT1}~or a superset thereof, \texttt{8r} and
-% \texttt{8a}. It's easy to hack in another encoding, if required,
-% as would be the case with a superset or \texttt{OT1}\@.
-% If we don't recognize the encoding, stick to using
-% \texttt{symbols} and~\texttt{letters}.
-%
-% NFSS~has a ``\cs{DeclareMathDelimiter}'' but nothing
-% to assign \cs{delcode}s. We try to make a general macro
-% and insist on saying ``\cs{symletters}'' rather than
-% just saying~``\texttt{1}'', eventhough it's pretty
-% much out of the question that \cs{symoperators},
-% \cs{symletters}, \cs{symsymbols} and \cs{symlargeoperators}
-% are something other than 0, 1, 2 and~3, respectively, since
-% \TeX~itself checks for extra \texttt{fontdimen}s
-% of \cs{fam2} and~\cs{fam3} before it agrees to typeset math.
-% (The second and fourth arguments should be hexadecimal numbers
-% without the~``\texttt"''.)
-%    \begin{macrocode}
-\def\mt@assign@del#1#2#3#4#5{%
-         \edef\reserved@a{\expandafter\the\csname sym#2\endcsname}%
-         \edef\reserved@b{\expandafter\the\csname sym#4\endcsname}%
-         \delcode#1="\reserved@a#3\reserved@b#5 \relax}
-%    \end{macrocode}
-% 
-% This code is read once and not stored, so
-% we just write the whole thing out case by case.
-% \cs{colon}~is defined in some of the \AmS~packages, so
-% don't overwrite an existing definition.
-%
-% Here's the overly conservative option:
-%    \begin{macrocode}
-\ifcase\mt@ops % case 0
-   \DeclareMathSymbol{(}{\mathopen}{letters}{"2E}
-   \mt@assign@del{`\(}{letters}{2E}{largesymbols}{00}
-   \DeclareMathSymbol{)}{\mathclose}{letters}{"2F}
-   \mt@assign@del{`\)}{letters}{2F}{largesymbols}{01}
-   \DeclareMathSymbol{+}{\mathbin}{symbols}{"43}
-   \DeclareMathSymbol{=}{\mathrel}{symbols}{"44}% identical one at "48
-   \DeclareMathSymbol{;}{\mathpunct}{symbols}{"49}
-   \DeclareMathSymbol{[}{\mathopen}{symbols}{"54}
-   \mt@assign@del{`\[}{symbols}{54}{largesymbols}{02}
-   \DeclareMathSymbol{]}{\mathclose}{symbols}{"55}
-   \mt@assign@del{`\]}{symbols}{55}{largesymbols}{03}
-   \DeclareMathSymbol{:}{\mathrel}{symbols}{"56}
-   \ifx\colon\undefined
-      \DeclareMathSymbol{\colon}{\mathpunct}{symbols}{"56}
-   \fi
-   \DeclareMathSymbol{!}{\mathclose}{symbols}{"57}
-   \DeclareMathSymbol{.}{\mathord}{letters}{"3A}
-   \DeclareMathSymbol{\period}{\mathpunct}{letters}{"3A}
-   \DeclareMathSymbol{,}{\mathpunct}{letters}{"3B}
-   %\DeclareMathSymbol{<}{\mathrel}{letters}{"3C}% format defaults
-   %\DeclareMathSymbol{>}{\mathrel}{letters}{"3E}
-   %\DeclareMathSymbol{|}{\mathord}{symbols}{"6A}
-   %\DeclareMathSymbol{/}{\mathord}{letters}{"3D}
-   %\DeclareMathSymbol{-}{\mathbin}{symbols}{"00}
-%    \end{macrocode}
-% Now the safe version; the stuff we take from operators
-% never gets used in ``synthesized'' or extensible symbols.
-%    \begin{macrocode}
-\or           % case 1
-   \DeclareMathSymbol{(}{\mathopen}{operators}{`\(}
-   \mt@assign@del{`\(}{operators}{28}{largesymbols}{00}
-   \DeclareMathSymbol{)}{\mathclose}{operators}{`\)}
-   \mt@assign@del{`\)}{operators}{29}{largesymbols}{01}
-   \DeclareMathSymbol{+}{\mathbin}{symbols}{"43}
-   \DeclareMathSymbol{=}{\mathrel}{symbols}{"44}% identical one at "48
-   \DeclareMathSymbol{;}{\mathpunct}{operators}{`\;}
-   \DeclareMathSymbol{[}{\mathopen}{operators}{`\[}
-   \mt@assign@del{`\[}{operators}{5B}{largesymbols}{02}
-   \DeclareMathSymbol{]}{\mathclose}{operators}{`\]}
-   \mt@assign@del{`\]}{operators}{5D}{largesymbols}{03}
-   \DeclareMathSymbol{:}{\mathrel}{operators}{`\:}
-   \ifx\colon\undefined % AMS defines it differently; don't overwrite that
-      \DeclareMathSymbol{\colon}{\mathpunct}{operators}{`\:}
-   \fi
-   \DeclareMathSymbol{!}{\mathclose}{operators}{`\!}
-   \DeclareMathSymbol{.}{\mathord}{operators}{`\.}
-   \DeclareMathSymbol{\period}{\mathpunct}{operators}{`\.}
-   \DeclareMathSymbol{,}{\mathpunct}{operators}{`\,}
-   %\DeclareMathSymbol{<}{\mathrel}{letters}{"3C}% format defaults
-   %\DeclareMathSymbol{>}{\mathrel}{letters}{"3E}
-   %\DeclareMathSymbol{|}{\mathord}{symbols}{"6A}
-   %\DeclareMathSymbol{/}{\mathord}{letters}{"3D}
-   %\DeclareMathSymbol{-}{\mathbin}{symbols}{"00}
-%    \end{macrocode}
-% Now \texttt{opmax}. This is risky, or more exactly
-% some glyphs \emph{will} be flawed, because the minus
-% and equal signs won't line up with arrows, etc. On the
-% other hand, this will minimize the use of non-resident fonts,
-% so it may make the final output marginally smaller if
-% you have partial font downloading or if you include
-% the MathT\i me fonts as bitmaps.
-%    \begin{macrocode}
-\or           % case 2
-   \PackageWarning{mt11p}{opmax enabled}
-   \DeclareMathSymbol{(}{\mathopen}{operators}{`\(}
-   \mt@assign@del{`\(}{operators}{28}{largesymbols}{00}
-   \DeclareMathSymbol{)}{\mathclose}{operators}{`\)}
-   \mt@assign@del{`\)}{operators}{29}{largesymbols}{01}
-   \DeclareMathSymbol{+}{\mathbin}{operators}{`\+}
-   \DeclareMathSymbol{=}{\mathrel}{operators}{`\=}% dangerous
-   \DeclareMathSymbol{;}{\mathpunct}{operators}{`\;}
-   \DeclareMathSymbol{[}{\mathopen}{operators}{`\[}
-   \mt@assign@del{`\[}{operators}{5B}{largesymbols}{02}
-   \DeclareMathSymbol{]}{\mathclose}{operators}{`\]}
-   \mt@assign@del{`\]}{operators}{5D}{largesymbols}{03}
-   \DeclareMathSymbol{:}{\mathrel}{operators}{`\:}
-   \ifx\colon\undefined
-      \DeclareMathSymbol{\colon}{\mathpunct}{operators}{`\:}
-   \fi
-   \DeclareMathSymbol{!}{\mathclose}{operators}{`\!}
-   \DeclareMathSymbol{.}{\mathord}{operators}{`\.}
-   \DeclareMathSymbol{\period}{\mathpunct}{operators}{`\.}
-   \DeclareMathSymbol{,}{\mathpunct}{operators}{`\,}
-   \DeclareMathSymbol{/}{\mathord}{operators}{`\/}
-   \mt@assign@del{`\/}{operators}{2F}{largesymbols}{0E}
-%    \end{macrocode}
-% Now we have to be careful: \texttt{<}\@, \texttt{>} and \texttt{\string|}
-% can be taken from \texttt{operators}
-% if \cs{encodingdefault} is anything \emph{except}~\texttt{OT1}\@.
-% We use an \texttt{endash} instead of a hyphen for the minus sign 
-% if we recognize the encoding to get at least something close
-% to a real minus sign. That's a sloppy kludge,
-% but choosing the~\texttt{opmax} option implies you've lowered your
-% standards somewhat.
-%    \begin{macrocode}
-   \def\reserved@a{OT1}\edef\reserved@b{\encodingdefault}
-   \ifx\reserved@a\reserved@b % unavailable in OT1...
-      %\DeclareMathSymbol{<}{\mathrel}{letters}{"3C}% format defaults
-      %\DeclareMathSymbol{>}{\mathrel}{letters}{"3E}
-      %\DeclareMathSymbol{|}{\mathord}{symbols}{"6A}
-      \DeclareMathSymbol{-}{\mathbin}{operators}{"7B}% dangerous
-   \else
-      \def\reserved@a{T1}%
-      \ifx\reserved@a\reserved@b
-         \DeclareMathSymbol{-}{\mathbin}{operators}{"15}% dangerous
-      \else
-         \def\reserved@a{8r}%
-         \ifx\reserved@a\reserved@b
-            \DeclareMathSymbol{-}{\mathbin}{operators}{150}% dangerous
-         \else
-            \def\reserved@a{8a}%
-            \ifx\reserved@a\reserved@b
-               \DeclareMathSymbol{-}{\mathbin}{operators}{"B1}% dangerous
-            \else
-               % keep symbols, slot "00
-            \fi % 8a
-         \fi % 8r
-      \fi % T1
-      \DeclareMathSymbol{<}{\mathrel}{operators}{`\<}% ascii positions
-      \DeclareMathSymbol{>}{\mathrel}{operators}{`\>}
-      \DeclareMathSymbol{|}{\mathord}{operators}{`\|}
-      \mt@assign@del{`\|}{operators}{7C}%  ascii bar
-                      {largesymbols}{0C}
-      \DeclareMathDelimiter\backslash\mathord{operators}{"5C}% ascii backslash
-                                          {largesymbols}{"0F}
-      \DeclareMathDelimiter\lbrace   \mathopen{operators}{`\{}% ascii `{'
-                                          {largesymbols}{"08}
-      \DeclareMathDelimiter\rbrace   \mathclose{operators}{`\}}% ascii `}'
-                                          {largesymbols}{"09}
-   \fi
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@ops}%
-                {The mathsymbol setup is hosed; expect bad output.}
-\fi
-%    \end{macrocode}
-%
-% \paragraph{Math Accents}
-% Accents in math can be made to either use a fixed font,
-% or to obey math alphabets. In order to have
-% accents of the latter type,
-% we \emph{must} recognize the \cs{encodingdefault}
-% (which the \texttt{operators} math family is in)
-% and set the corresponding accent codes up for that encoding.
-% If we don't recognize the encoding we have to use fixed accents;
-% MathT\i me provides suitable accents in the \texttt{symbols}~font.
-%
-% For some reason the ring accent~``\aa'' is always
-% left out, so we define it, but don't warn if
-% we're stuck with \texttt{symbols} accents
-% which have no ring accent glyph and just make \cs{ring} a no-op.
-%
-% The code below is written out long hand style, to keep it
-% legible. It does not get stored, it's read only once, and
-% most of it is skipped, so it would be only a marginal
-% improvement to merge everything.
-%
-% The \texttt{opaccents} case:
-%    \begin{macrocode}
-\ifcase\mt@accs % case 0
-%    \end{macrocode}
-% We do something similar to what \AmS~does, but rather
-% simple-mindedly: choose between `fixed' (class~\texttt0)
-% or `variable' (class~\texttt7) based on the value of
-% \cs{mt@acc@class}, whose value should be either~\texttt0
-% or~\texttt7,
-% depending on whether the (encoding of the)
-% current math alphabet has accents \textit{in the expected positions}.
-% We could use the \AmS{} hook (\cs{accentclass@}), but
-% we ought to make our own\ldots{} Actually, this is
-% slightly naughty; we could have gone
-% through the \cs{DeclaterMathAccent}
-% command, declare two accents, and have the user-level
-% accent command pick the right one based on something
-% \cs{noaccents@} says, but that's kind of pointless.
-%
-% All of this works as long as we recognize the encoding. If we don't,
-% use fixed accents from \texttt{symbols} and complain.
-% The slot specification must be in hex.
-%    \begin{macrocode*}
-\def\mt@accent@make#1#2{\def#1{\mathaccent"\mt@acc@class0#2 }}
-%    \end{macrocode*}
-% Here are the encodings we recognize:
-%    \begin{macrocode}
-   \edef\reserved@a{\encodingdefault}
-   \def\reserved@b{T1}% a.k.a Cork or DC or EC
-   \ifx\reserved@a\reserved@b
-      \mt@accent@make{\grave}{00}
-      \mt@accent@make{\acute}{01}
-      \mt@accent@make{\hat}{02}
-      \mt@accent@make{\tilde}{03}
-      \mt@accent@make{\ddot}{04}
-      \mt@accent@make{\ring}{06}
-      \mt@accent@make{\check}{07}
-      \mt@accent@make{\breve}{08}
-      \mt@accent@make{\bar}{09}
-      \mt@accent@make{\dot}{0A}
-   \else
-      \def\reserved@b{OT1}% ``Knuth roman''
-      \ifx\reserved@a\reserved@b
-        \mt@accent@make{\grave}{12}
-        \mt@accent@make{\acute}{13}
-        \mt@accent@make{\check}{14}
-        \mt@accent@make{\breve}{15}
-        \mt@accent@make{\bar}{16}
-        \mt@accent@make{\ring}{17}
-        \mt@accent@make{\hat}{5E}
-        \mt@accent@make{\dot}{5F}
-        \mt@accent@make{\tilde}{7E}
-        \mt@accent@make{\ddot}{7F}
-      \else
-         \def\reserved@b{8r}% TeXBase1
-         \ifx\reserved@a\reserved@b
-            \mt@accent@make{\dot}{01}
-            \mt@accent@make{\ring}{09}
-            \mt@accent@make{\breve}{0B}}
-            \mt@accent@make{\check}{10}
-            \mt@accent@make{\grave}{1E}
-            \mt@accent@make{\hat}{88}
-            \mt@accent@make{\tilde}{98}
-            \mt@accent@make{\ddot}{A8}
-            \mt@accent@make{\bar}{AF}
-            \mt@accent@make{\acute}{B4}
-         \else
-            \def\reserved@b{8a}% AdobeStandard
-            \ifx\reserved@a\reserved@b
-               \mt@accent@make{\grave}{C1}
-               \mt@accent@make{\acute}{C2}
-               \mt@accent@make{\hat}{C3}
-               \mt@accent@make{\tilde}{C4}
-               \mt@accent@make{\bar}{C5}
-               \mt@accent@make{\breve}{C6}
-               \mt@accent@make{\dot}{C7}
-               \mt@accent@make{\ddot}{C8}
-               \mt@accent@make{\ring}{CA}
-               \mt@accent@make{\check}{CF}
-%    \end{macrocode}
-% If we don't recognize the encoding, we have to resort to \texttt{symbols}:
-%    \begin{macrocode}
-            \else % I give up...
-               \DeclareMathAccent\grave{\mathord}{symbols}{"4A}
-               \DeclareMathAccent\acute{\mathord}{symbols}{"4B}
-               \DeclareMathAccent\check{\mathord}{symbols}{"4C}
-               \DeclareMathAccent\breve{\mathord}{symbols}{"4D}
-               \DeclareMathAccent\bar  {\mathord}{symbols}{"4E}
-               \DeclareMathAccent\hat  {\mathord}{symbols}{"4F}
-               \DeclareMathAccent\dot  {\mathord}{symbols}{"50}
-               \DeclareMathAccent\tilde{\mathord}{symbols}{"51}
-               \DeclareMathAccent\ddot {\mathord}{symbols}{"52}
-               \def\ring#1{{#1}} % no \ring in the symbols font
-               \PackageError{mt11p}%
-                            {Unknown \string\encodingdefault\space
-                                     \encodingdefault. \MessageBreak
-                             Reverting to fixed accents
-                             from symbols font}%
-                            {I had to make math accents ignore alphabet
-                             changes,\MessageBreak
-                             because I don't recognize the
-                             `\encodingdefault' encoding.}
-            \fi % 8a
-         \fi % 8r
-      \fi % OT1
-   \fi % T1
-%    \end{macrocode}
-% Add the switch to \cs{noaccents@} (and check that that's defined before
-% hand) and initialize the flag.
-%    \begin{macrocode}
-   \ifx\noaccents@\@undefined\let\noaccents@\@empty\fi % be safe
-   \g@addto@macro{\noaccents@}{\def\mt@acc@class{0}}
-   \def\mt@acc@class{7}
-%    \end{macrocode}
-%
-% The \texttt{symaccents} case is easy; just make everything fixed,
-% and make sure \cs{noaccents@} is defined.
-%    \begin{macrocode}
-\or % case 1, accents from symbols
-   \DeclareMathAccent\grave{\mathord}{symbols}{"4A}
-   \DeclareMathAccent\acute{\mathord}{symbols}{"4B}
-   \DeclareMathAccent\check{\mathord}{symbols}{"4C}
-   \DeclareMathAccent\breve{\mathord}{symbols}{"4D}
-   \DeclareMathAccent\bar  {\mathord}{symbols}{"4E}
-   \DeclareMathAccent\hat  {\mathord}{symbols}{"4F}
-   \DeclareMathAccent\dot  {\mathord}{symbols}{"50}
-   \DeclareMathAccent\tilde{\mathord}{symbols}{"51}
-   \DeclareMathAccent\ddot {\mathord}{symbols}{"52}
-   \def\ring#1{{#1}} % no \ring in the symbols font
-   \ifx\noaccents@\@undefined\let\noaccents@\@empty\fi % be safe
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@accs}%
-                {The math accent setup is hosed; expect bad output.}
-\fi
-%    \end{macrocode}
-%
-% Now another messy part: the \AmS~package \pkg{amsmath}
-% has the macros~\cs{Hat}, etc., defined with hard-coded
-% accent positions. We redo the definition to work with whatever
-% encoding or accents we're using. The code below is basically
-% copied from the \AmS~package. We omit this patch unless
-% all of the following conditions are satisfied:
-% \textit{i\/})~the macro \cs{mathaccent@} exists;
-% \textit{iii\/})~the macros \cs{Hat} and~\cs{Check} exist;
-% \textit{iii\/})~there exists a macro \cs{accentclass@} whose
-% definition is ``7''. If all of that is~\textsc{ok}
-% we pretty likely have the \pkg{amsmath}~package and the following
-% should be safe. Note that \cs{mathaccent@} is a 
-% rather large macro that figures out what skew kern is needed
-% to get double accents to line up.
-%    \begin{macrocode}
-\ifx\mathaccent@\undefine\else % (i)
-\ifx\Hat\undefine\else         % (iia)
-\ifx\Check\undefine\else       % (iib)
-\def\@tempa{7}%
-\ifx\@tempa\accentclass@       % (iii)
-   \PackageInfo{mt11p}{amsmath detected; redefining double accents}
-%    \end{macrocode}
-% Define fancy versions of \cs{hat},~etc., called ``\cs{Hat}'',~etc.,
-% that perform skew calculations. To get a double accent say
-% something like~|\Hat{\Hat{x}}|.
-%
-% There are two versions of the definition macro: one for
-% fixed accents, another for variable ones.
-%    \begin{macrocode}
-   \def\@tempa#1#2{% variable 7/0
-             \def#1{\relax % write it out
-                    \ifmmode
-                        \def\next@{\mathaccent@{"\accentclass@#2 }}%
-                    \else
-                        \def\next@{\nonmatherr@{#1}}%
-                    \fi
-                    \next@}}
-   \def\@tempb#1#2{% fixed
-             \def#1{\relax % write it out
-                    \ifmmode
-                        \def\next@{\mathaccent@{"0#2 }}%
-                    \else
-                        \def\next@{\nonmatherr@{#1}}%
-                    \fi
-                    \next@}}
-%    \end{macrocode}
-% These two accents are from the \texttt{symbols} fonts:
-%    \begin{macrocode}
-   \@tempb\Vec{245}
-   \@tempb\Overbar{253}
-   \def\Widebar{\Overbar}% synonym
-%    \end{macrocode}
-% Go through the encodings we know and define the accents again\ldots{}
-% The \texttt{symaccents}~option affects this too.
-%    \begin{macrocode}
-   \ifnum\mt@accs=0 %
-      \edef\reserved@a{\encodingdefault}
-      \def\reserved@b{T1}% a.k.a Cork or DC or EC
-      \ifx\reserved@a\reserved@b
-         \@tempa\Hat{002}
-         \@tempa\Check{007}
-         \@tempa\Tilde{003}
-         \@tempa\Acute{001}
-         \@tempa\Grave{000}
-         \@tempa\Dot{00A}
-         \@tempa\Ddot{004}
-         \@tempa\Breve{008}
-         \@tempa\Bar{009}
-      \else
-         \def\reserved@b{OT1}% DEK's
-         \ifx\reserved@a\reserved@b 
-            \@tempa\Grave{012}
-            \@tempa\Acute{013}
-            \@tempa\Check{014}
-            \@tempa\Breve{015}
-            \@tempa\Bar{016}
-            \@tempa\Hat{05E}
-            \@tempa\Dot{05F}
-            \@tempa\Tilde{07E}
-            \@tempa\Ddot{07F}
-         \else
-            \def\reserved@b{8r}% TeXBase1
-            \ifx\reserved@a\reserved@b 
-               \@tempa\Dot{001}
-               \@tempa\Breve{00B}
-               \@tempa\Check{010}
-               \@tempa\Grave{01E}
-               \@tempa\Hat{088}
-               \@tempa\Tilde{098}
-               \@tempa\Ddot{0A8}
-               \@tempa\Bar{0AF}
-               \@tempa\Acute{0B4}
-            \else
-               \def\reserved@b{8a}% AdobeStandard
-               \ifx\reserved@a\reserved@b 
-                  \@tempa\Grave{0C1}
-                  \@tempa\Acute{0C2}
-                  \@tempa\Hat{0C3}
-                  \@tempa\Tilde{0C4}
-                  \@tempa\Bar{0C5}
-                  \@tempa\Breve{0C6}
-                  \@tempa\Dot{0C7}
-                  \@tempa\Ddot{0C8}
-                  \@tempa\Check{0CF}
-               \else % beats me...
-%    \end{macrocode}
-% If we don't know the encoding use fixed accents from \texttt{symbols}.
-% We already gave an error message before, so just warn.
-%    \begin{macrocode}
-                  \@tempb\Grave{24A}
-                  \@tempb\Acute{24B}
-                  \@tempb\Check{24C}
-                  \@tempb\Breve{24D}
-                  \@tempb\Bar{24E}
-                  \@tempb\Hat{24F}
-                  \@tempb\Dot{250}
-                  \@tempb\Tilde{251}
-                  \@tempb\Ddot{252}
-                  \PackageWarning{mt11p}{using fixed accents for amsmath}
-               \fi % 8a
-            \fi % 8r
-         \fi % OT1
-      \fi % T1
-   \else % symaccents option
-      \@tempb\Grave{24A}
-      \@tempb\Acute{24B}
-      \@tempb\Check{24C}
-      \@tempb\Breve{24D}
-      \@tempb\Bar{24E}
-      \@tempb\Hat{24F}
-      \@tempb\Dot{250}
-      \@tempb\Tilde{251}
-      \@tempb\Ddot{252}
-   \fi
-\fi\fi\fi\fi
-%    \end{macrocode}
-%
-% \paragraph{Upright Greek Text}
-% The \texttt{mtgu}* fonts are not meant to be used as symbols,
-% so we provide only text-type support: text mode font
-% changing commands, and a math alphabet.
-% Note that this means you \emph{can} use
-% the fonts in math with correct subscript sizing, etc.; just
-% say something like |\mathgr{m}| for an upright~$\mu$ (Computer
-% Modern does not have such a glyph); in text |\textgr{m}| will work.
-% Note also that the ligatures involving nonprinting \emph{letters}
-% for getting variant forms will work inside of~\cs{mathgr},
-%  but \texttt{o*}, \texttt{O*} or~\texttt{e*} will not, which is why we
-% added some ligatures to the \file{tfm}~file~(Sec.\,\ref{par:mathgr}).
-% The text commands are
-% non-fragile, because the components of the macros are robust.
-% See~Sec.\,\ref{unused} for making upright Greek letters
-% into math \textit{symbols}\@.
-% Trap the \texttt{nomathgr} case.
-%    \begin{macrocode}
-\def\greekshape{\fontencoding{LmtG}\selectfont}%
-\DeclareTextFontCommand{\textgr}{\greekshape}
-\ifcase\mt@mgr % case 0
-   \def\mathgr#1{\PackageError{mt11p}{upright Greek not loaded for math}%
-                                     {Don't use the nomathgr option.}%
-                 \hbox{\greekshape #1}}% as good as anything else
-\or % case 1
-   \DeclareMathAlphabet\mathgr {LmtG}{mtg}{\mddefault}{\updefault}
-   \SetMathAlphabet    \mathgr {normal}{LmtG}{mtg}{\mddefault}{\updefault}
-   \SetMathAlphabet    \mathgr {bold}  {LmtG}{mtg}{\bfdefault}{\updefault}
-   \SetMathAlphabet    \mathgr {heavy} {LmtG}{mtg}{\hvdefault}{\updefault}
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@mgr}%
-                {The \string\mathgr\space setup is hosed.}
-\fi
-\ifnum\mt@sub=1 %
-   \DeclareFontShape{LmtG}{mtg}{\hvdefault}{\updefault}%
-                    {<->ssub*mtg/\bfdefault/\updefault}{}% heavy mtgu SUBS
-\fi
-%    \end{macrocode}
-% The MathT\i me distribution defines the~\cs{gk} font switch macro,
-% roughly equivalent to~\cs{greekshape}; we don't.
-%
-% \paragraph{\cs{hbar}} needs to be defined a bit carefully.
-% The plain\TeX{} definition is just a macron (bar)
-% accent with an~`$h$' backed up into it:
-% |{\mathchar'26\mkern-9muh}|.
-% This  is pretty horrible, and doesn't work in Times,
-% no matter what \cs{mkern} you use. The definition below
-% actually looks rather decent in all math versions.
-% We define a private bar accent to be taken from the 
-% \texttt{symbols}~math family, since we don't know what the
-% \cs{bar} accent is (it might follow math alphabets changes).
-% Force the~`\textit h' to be taken from~\texttt{letters}.
-%    \begin{macrocode}
-\ifnum\mt@hbar=1 %
-   \DeclareMathSymbol \mt@hbar@macron {\mathord}{symbols}{"4E}%
-   \DeclareMathSymbol \mt@hbar@h      {\mathord}{letters}{`\h}
-   \def\hbar@macron#1{\hbox to\z@{\m@th\raisebox{-0.16\height}%
-                        {$\csname#1style\endcsname
-                            \mkern.65mu\mt@hbar@macron$}\hss}}
-   \def\hbar{\mathord{\mathchoice{\hbar@macron{display}}%
-                                 {\hbar@macron{text}}%
-                                 {\hbar@macron{script}}%
-                                 {\hbar@macron{scriptscript}}%
-                      \mt@hbar@h}}
-
-\fi
-%    \end{macrocode}
-%
-% \paragraph{\cs{dag}\@, \cs{ddag}\@, \cs{S} and \cs{P}}
-% First a comment: the only reason we are dealing with these symbols
-% at all is that they historically came from math
-% (\texttt{OMS})~fonts;
-% it would be easier to use a text symbol font, but 
-% such a font is not yet commonly in use,
-% so we hack around with~\texttt{8r}. If you do have
-% such a setup, the \texttt{nodag}~option will
-% skip all of the stuff below and not touch
-% these four symbols, but check that the setup you use
-% does not assume \cs{fam2}~is~\texttt{OMS}\@.
-%
-% The default is to fetch the symbols from~\texttt{8r}.
-% We do not use anything else from~\texttt{8r},
-% in particular we don't touch \cs{textregistered},
-% \cs{texttrademark},~etc.
-% The \file{8r.sty}~``emulation'' included herein only deals with
-% the four symbols.
-%
-% The format files defines these to use text or math
-% versions of the character commands by using definitions similar
-% to\footnote{Lines not proceeded by a line number are a part of this
-% description and do not wind up in the \file{sty}~file!}
-% \begin{verbatim}
-% \def\P{\ifmmode\mathparagraph\else\textparagraph\fi}
-% \end{verbatim}
-% (The actual definition is made robust.) The text versions have
-% declared defaults taken from~\texttt{OMS}\@;
-% the math versions were
-% \cs{mathchar}s pointing to the (\texttt{OMS})~\texttt{symbols}
-% math family. We do the text versions first,
-% since the handling of the math versions depends on them.
-%
-% We take the text symbols from \texttt{8r}~fonts, unless we're told
-% not to (or unless we're skipping the whole thing).
-% The format file makes the default test encoding for these
-% four symbols~\texttt{OMS}, so we don't have to do anything.
-% \texttt{8r}~fonts.
-%    \begin{macrocode}
-\ifcase\mt@eightR % case 0
-   \PackageInfo{mt11p}{Retaining CM for \string\textdagger, etc}%
-%    \end{macrocode}
-% We have to be careful here, because the use of
-% \texttt{8r}~fonts is ``non-standard''. So check if we have an
-% \texttt{8r}~\file{.fd}~file for \cs{rmdefault}\@. If so, check for
-% \file{8r.sty}, read that, and (re)declare the four text commands we need.
-% If there's no \file{8r.sty}\@, supply just enough to get to the
-% four symbols we need. We assume the TFM~files \emph{do exist}
-% (they have to, because MathT\i me virtual fonts use them),
-% but we try loading the \file{tfm}~file just to make sure.
-%    \begin{macrocode}
-\or % case 1
-   \IfFileExists{8r\rmdefault.fd}%
-         {\IfFileExists{8r.sty}%
-               {\PackageInfo{mt11p}%
-                             {MT math using 8r.sty}%
-                \RequirePackage{8r}%
-                \DeclareTextSymbol{\textsection}{8r}{167}%   section
-                \DeclareTextSymbol{\textparagraph}{8r}{182}% paragraph
-                \DeclareTextSymbol{\textdagger}{8r}{134}%    dagger
-                \DeclareTextSymbol{\textdaggerdbl}{8r}{135}% daggerdbl
-                \DeclareTextSymbolDefault{\textsection}{8r}%
-                \DeclareTextSymbolDefault{\textparagraph}{8r}%
-                \DeclareTextSymbolDefault{\textdagger}{8r}%
-                \DeclareTextSymbolDefault{\textdaggerdbl}{8r}%
-               }% using 8r.sty
-               {\PackageWarning{mt11p}%
-                               {No file 8r.sty found. Winging it}%
-                \DeclareFontEncoding{8r}{}{\no@accents}%
-                \DeclareFontSubstitution{8r}{\rmdefault}%
-                                            {\mddefault}{\updefault}%
-                \DeclareTextSymbol{\textsection}{8r}{167}%   section
-                \DeclareTextSymbol{\textparagraph}{8r}{182}% paragraph
-                \DeclareTextSymbol{\textdagger}{8r}{134}%    dagger
-                \DeclareTextSymbol{\textdaggerdbl}{8r}{135}% daggerdbl
-                \DeclareTextSymbolDefault{\textsection}{8r}%
-                \DeclareTextSymbolDefault{\textparagraph}{8r}%
-                \DeclareTextSymbolDefault{\textdagger}{8r}%
-                \DeclareTextSymbolDefault{\textdaggerdbl}{8r}%
-               }% faked 8r.sty
-         \input{8r\rmdefault.fd}%
-         }% 8r\rmdefault.fd was available
-         {\PackageWarning{mt11p}%
-                         {No fd file for 8r-coded \string\rmdefault\space
-                              found; guessing TFM file names}% 
-%    \end{macrocode}
-% If there's no \file{.fd}~file for \cs{rmdefault}
-% we have to wing it. Just declare the
-% \texttt{8r}~fonts for \cs{rmdefault} text family.
-% (That's all you would have with Computer Modern fonts anyway,
-% and since we're here, no elaborate setup exists on the system.)
-% Hopefully the TFM~files are available and they have the 
-% expected names. This will work when someone has the
-% \texttt{8r}-based fonts installed,
-% but no support for using the raw fonts. To catch the fatal case right now,
-% we just load the \texttt{8r}~font by hand and put a somewhat illuminating
-% comment on the same line in case \TeX~complains.
-%    \begin{macrocode}
-     \font\preloaded=\rmdefault r8r\relax % next time try the `no8r' option
-          \let\preloaded\undefined
-          \DeclareFontEncoding{8r}{}{\no@accents}%
-          \DeclareFontFamily{8r}{\rmdefault}{\hyphenchar\font=-1 }%
-          \DeclareFontSubstitution{8r}{\rmdefault}{\mddefault}{\updefault}%
-          \DeclareFontShape{8r}{\rmdefault}{\mddefault}{\updefault}%
-                                           {<->\rmdefault  r8r}{}%
-          \DeclareFontShape{8r}{\rmdefault}{\bfdefault}{\updefault}%
-                                           {<->\rmdefault  b8r}{}%
-          \DeclareFontShape{8r}{\rmdefault}{\mddefault}{\itdefault}%
-                                           {<->\rmdefault  ri8r}{}%
-          \DeclareFontShape{8r}{\rmdefault}{\bfdefault}{\itdefault}%
-                                           {<->\rmdefault  bi8r}{}%
-          \DeclareTextSymbol{\textsection}{8r}{167}%   section
-          \DeclareTextSymbol{\textparagraph}{8r}{182}% paragraph
-          \DeclareTextSymbol{\textdagger}{8r}{134}%    dagger
-          \DeclareTextSymbol{\textdaggerdbl}{8r}{135}% daggerdbl
-          \DeclareTextSymbolDefault{\textsection}{8r}%
-          \DeclareTextSymbolDefault{\textparagraph}{8r}%
-          \DeclareTextSymbolDefault{\textdagger}{8r}%
-          \DeclareTextSymbolDefault{\textdaggerdbl}{8r}%
-         }% no 8r\rmdefault.fd
-%    \end{macrocode}
-% Perhaps we're skipping this altogether.
-%    \begin{macrocode}
-\or % case 2
-   \PackageInfo{mt11p}{not doing anything with \string\textdagger, etc.}
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@eightR}%
-                {\string\dag, \string\ddag, \string\S\space and
-                 \string\P\space are probably hosed.}
-\fi
-%    \end{macrocode}
-%
-% If we're told not to use \texttt{8r}~fonts
-% (\cs{mt@eightR}$\,=0$) and
-% if \cs{mt@cal}$\,=0$, we have no choice but to get
-% \texttt{OMS}~as a `private' math alphabet
-% and fetch the symbols from there. The auxiliary macro
-% \cs{mt@al@hexsy} gets defined later.
-%    \begin{macrocode}
-\ifcase\mt@eightR % 0: avoid 8r
-   \ifnum\mt@cal=0 %
-      \DeclareMathAlphabet\mt@sy{OMS}{cmsy}{m}{n}
-      \SetMathAlphabet    \mt@sy{normal}{OMS}{cmsy}{m}{n}
-      \SetMathAlphabet    \mt@sy{bold}  {OMS}{cmsy}{b}{n}
-      \SetMathAlphabet    \mt@sy{heavy} {OMS}{cmsy}{\hvdefault}{\updefault}
-      \def\mathsection  {\mt@al@hexsy\mt@sy{78}}
-      \def\dagger       {\mt@al@hexsy\mt@sy{79}}
-      \def\ddagger      {\mt@al@hexsy\mt@sy{7A}}
-      \def\mathparagraph{\mt@al@hexsy\mt@sy{7B}}
-%    \end{macrocode}
-% (Substitutions have already been declared.)
-% If \cs{mt@cal}$\,>0$ we just use~\cs{mathcal}, which
-% will be~\texttt{OMS}.
-%    \begin{macrocode}
-   \else % \mt@cal>0
-      \def\mathsection  {\mt@al@hexsy\mathcal{78}}
-      \def\dagger       {\mt@al@hexsy\mathcal{79}}
-      \def\ddagger      {\mt@al@hexsy\mathcal{7A}}
-      \def\mathparagraph{\mt@al@hexsy\mathcal{7B}}
-   \fi
-%    \end{macrocode}
-% If it's~\textsc{ok} to use the \texttt{8r}~fonts, make
-% them a ``private'' math alphabet.
-% Here we do need substitution declarations. The \file{.fd}~file
-% has already been read (or the data supplied).
-%    \begin{macrocode}
-\or % 1: 8r is ok
-   \DeclareMathAlphabet\mt@sy{8r}{\rmdefault}{\mddefault}{\updefault}
-   \SetMathAlphabet \mt@sy {normal}{8r}%
-                             {\rmdefault}{\mddefault}{\updefault}
-   \SetMathAlphabet \mt@sy {bold}  {8r}%
-                             {\rmdefault}{\bfdefault}{\updefault}
-   \SetMathAlphabet \mt@sy {heavy} {8r}%
-                             {\rmdefault}{\hvdefault}{\updefault}
-   \def\mathparagraph{\mt@al@hexsy\mt@sy{B6}}
-   \def\dagger       {\mt@al@hexsy\mt@sy{86}}
-   \def\ddagger      {\mt@al@hexsy\mt@sy{87}}
-   \def\mathsection  {\mt@al@hexsy\mt@sy{A7}}
-   \ifnum\mt@sub=1 %
-      \DeclareFontShape{8r}{\rmdefault}{\hvdefault}{\updefault}% heavy \rm in 8r SUBS
-                           {<->ssub*\rmdefault/\bfdefault/\updefault}{}
-   \fi
-%    \end{macrocode}
-% Or skip it\ldots
-%    \begin{macrocode}
-\or % 2: nothing
-   \PackageInfo{mt11p}{not doing anything with (math) \string\dagger, etc.}
-\fi
-%    \end{macrocode}
-% Actually, the code above is suboptimal in the sense that is \cs{encodingdefault}
-% happens to be~\texttt{8r}, we waste a math family. Hopefully, no heavy
-% math user is running~\texttt{8r}\ldots
-%
-% \subsection{Auxiliary macro}
-% In a few instances we need a macro to get
-% a specific character from a particular math alphabet,
-% i.e., some thing like
-% ``\hbox{\cs{math}\textit{alph}\texttt{\char`\{}\cs{char}\relax
-% \texttt{"\itshape yy}\texttt{\char`\}}}''. You can't do that
-% though, you would get \cs{mathchar"00yy}. The \TeX{} math
-% class~\texttt7 and \cs{fam} are used to get letters and digits
-% from math alphabets, so we can just say
-% \hbox{\cs{math}\textit{alph}\texttt{\char`\{}\cs{mathchar}\relax
-% \texttt{"70\itshape yy}\texttt{\char`\}}}.
-% The macro below is shorthand for the operation
-% ``set character $\langle\mathit{slot}\rangle$ from the font of
-% the math alphabet \cs{math}\textit{alph\/}''.
-%    \begin{macrocode}
-\def\mt@al@hexsy#1#2{#1{\mathchar"70#2}}
-%    \end{macrocode}
-% where \texttt{\#1}~is the math alphabet macro (e.g.,~\cs{mathcal})
-% and \texttt{\#2}~is the hexadecimal number of the slot (no double quote).
-%
-% \subsection{Assorted Fixes, Odds \&{} Ends}
-% Here are a few assorted (sordid\texttt{\small;-)}) fixes.
-%
-% \paragraph{Active Underscore}
-% Make the underscore character
-% active so we can kern to
-% \texttt j,~\texttt f~and~\texttt p
-% in subscripts. This is rather messy
-% and probably breaks on occasion. The code
-% was basically copied from the MathT\i me distribution.
-%    \begin{macrocode}
-\ifcase\mt@sb % case 0
-   \PackageInfo{mt11p}{not using active underscore}
-\or % case 1
-   \ifnum\the\catcode`\_=8 %
-      \ifnum\the\mathcode`\_=32768 % "8000
-         \PackageInfo{mt11p}{redefining the underscore \string\catcode}
-         \PackageInfo{mt11p}{\string\catcode\space of underscore made 12 (other)}
-         \def\space@.{\futurelet\space@\relax}
-         \space@. %
-         \let\mt@orig@sb_
-         \catcode`\_=\active
-         \def_{\ifmmode\expandafter\sb@\else\expandafter\mt@orig@sb\fi}
-         \let\sb_
-         \def\sb@#1{\mt@orig@sb{\futurelet\next\sb@@#1}}
-         \def\sb@@{\ifx\next\space@\def\next@. {\futurelet\next\sb@@}%
-                   \else
-                      \def\next@.{\ifx\next j\jadjust
-                             \else\ifx\next f\jadjust
-                             \else\ifx\next p\mkern-\@ne mu%
-                                  \fi\fi\fi}%
-                   \fi
-                   \next@.}
-         \@makeother\_
-      \else % \the\mathcode`\_<>"8000 !
-         \PackageWarning{mt11}{underscore did not have mathcode "8000;
-                               \MessageBreak Underscore not made active}
-      \fi
-   \else % \the\catcode`\_ <>8 !
-      \PackageWarning{mt11}{underscore was not of category 8;\MessageBreak
-                            Underscore not made active} 
-   \fi
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@sb}%
-                {Underscore not made active.}
-\fi
-%    \end{macrocode}
-% \cs{jadjust} is just a small negative kern:
-%    \begin{macrocode}
-\def\jadjust{\mkern-\tw@ mu}
-%    \end{macrocode}
-%
-% \paragraph{\cs{vdots}\@, \cs{ddots} and \cs{angle}}
-% might be missing \cs{m@th}s in the \cs{hbox}es.
-%    \begin{macrocode}
-\def\vdots{\vbox{\baselineskip4\p@\lineskiplimit\z@\kern6\p@
-                 \hbox{$\m@th.$}\hbox{$\m@th.$}\hbox{$\m@th.$}}}
-\def\ddots{\mathinner{%
-           \mkern1mu\raise7\p@\vbox{\kern7\p@\hbox{$\m@th.$}}\mkern2mu
-           \raise4\p@\hbox{$\m@th.$}\mkern2mu%
-           \raise\p@\hbox{$\m@th.$}\mkern1mu}}
-%    \end{macrocode}
-%
-% The plain\TeX{} definition of~\cs{angle} has an \cs{hrule}~height
-% of~$0.34\mathrm{pt}$; the MathT\i me distribution says~``$0.48\mathrm{pt}$''.
-% Both of those numbers are suspiciously close to the default rule thickness
-% of the (scaled) extention font.
-% We define \cs{angle} to use the default rule thickness, i.e.,
-% \cs{fontdimen~8} of the appropriate extention (family~\texttt3)
-% font. This does not work in \cs{scriptscriptstyle}, but that
-% case is unlikely to occur. The \file{.tfm}~files have been
-% slightly changed to make \cs{fontdimen~8} really be the rule
-% thickness implied, e.g., by the height of the root glyphs.
-%    \begin{macrocode}
-\def\mt@angle#1#2{{\vbox{\ialign{$\m@th#1##$\crcr
-            \not\mathrel{\mkern14mu}\crcr
-            \noalign{\nointerlineskip}%
-            \mkern2.5mu\leaders\hrule height1.05\fontdimen8#2 3 %
-                              \hfill\mkern2.5mu\crcr}}}}
-\def\angle{\mathchoice{\mt@angle{\scriptstyle}{\scriptfont}}
-                      {\mt@angle{\scriptstyle}{\scriptfont}}
-                      {\mt@angle{\scriptscriptstyle}{\scriptscriptfont}}
-                      {\mt@angle{\scriptscriptstyle}{\scriptscriptfont}}}
-%    \end{macrocode}
-%
-% \paragraph{The Tie Accent} Usually, the \cs{t}~accent~(\t oo)
-% is taken from an~\texttt{OML}~font (position~|"7F|).
-% MathT\i me has the tie in \texttt{symbols},
-% so we take it from there, and make it the dafault.
-%    \begin{macrocode}
-\DeclareTextAccent{\t}{LmtS}{"41}
-\DeclareTextAccentDefault{\t}{LmtS}
-%    \end{macrocode}
-%
-% \paragraph{\cs{textcircled}} The large-ish circle for
-% constructing~\copyright, \textregistered,~etc.,
-% is usually taken from~\texttt{OMS}. The \texttt{LmtS}~fonts have
-% the same glyph in the same slot, so just redefine
-% the default to point to~\texttt{LmtS}.
-% A text symbol font might have~\copyright, etc., available as single
-% characters, e.g., the raw \texttt{8r}~fonts do, but
-% it's not our business to deal with all that.
-%    \begin{macrocode}
-\DeclareTextAccentDefault{\textcircled}{LmtS}
-\DeclareTextCommand{\textcircled}{LmtS}[1]{{%
-   \ooalign{\hfil\raise.07ex\hbox{\upshape#1}\hfil\crcr\char13}}}
-%    \end{macrocode}
-%
-% \paragraph{Misc.~text symbols} Some text versions
-% of a few symbols (\cs{text}$\langle\!\mathit{symb}\rangle$)
-% point to~\texttt{OM}* encodings; change the defaults.
-% Those symbols that exists in~\texttt{T1} will
-% be taken from~\texttt{T1} in text if that's
-% the \cs{encodingdefault}. Try to be nice even if
-% \cs{encodingdefault}~is \texttt{OT1} and point
-% the defaults to MathT\i me,
-% so we don't needlessly resort to Computer Modern.
-% Noone uses these definitions directly, but macros might.
-%    \begin{macrocode}
-\DeclareTextSymbol{\textless}{LmtL}{60}% afm names
-\DeclareTextSymbol{\textgreater}{LmtL}{62}
-\DeclareTextSymbol{\textperiodcentered}{LmtS}{1}
-\DeclareTextSymbol{\textasteriskmath}{LmtS}{3}% centered
-\DeclareTextSymbol{\textopenbullet}{LmtS}{14}
-\DeclareTextSymbol{\textbullet}{LmtS}{15}
-\DeclareTextSymbol{\textbraceleft}{LmtS}{102}
-\DeclareTextSymbol{\textbraceright}{LmtS}{103}
-\DeclareTextSymbol{\textbar}{LmtS}{106}
-\DeclareTextSymbol{\textbackslash}{LmtS}{110}
-%    \end{macrocode}
-% Make these the default:
-%    \begin{macrocode}
-\DeclareTextSymbolDefault{\textperiodcentered}{LmtS}
-\DeclareTextSymbolDefault{\textasteriskmath}{LmtS}
-\DeclareTextSymbolDefault{\textopenbullet}{LmtS}
-\DeclareTextSymbolDefault{\textbullet}{LmtS}
-\DeclareTextSymbolDefault{\textbraceleft}{LmtS}
-\DeclareTextSymbolDefault{\textbraceright}{LmtS}
-\DeclareTextSymbolDefault{\textbar}{LmtS}
-\DeclareTextSymbolDefault{\textbackslash}{LmtS}
-\DeclareTextSymbolDefault{\textless}{LmtL}
-\DeclareTextSymbolDefault{\textgreater}{LmtL}
-%    \end{macrocode}
-%
-% \paragraph{Oldstyle Digits} 
-% (See~Sec.\,\ref{OSdig}).
-% MathT\i me has no oldstyle digits, so we
-% grab the ones from~\texttt{OML}\@.
-% I'm not sure it's useful to have this command
-% in math mode, but we might as well do that too, though not via
-% a math family---we define a private \cs{math@OS}~alphabet instead. Read
-% the \texttt{.fd}~file, in case the format did no preloading.
-% \texttt{nomathOS} disables the math family.
-%    \begin{macrocode}
-\ifcase\mt@osdg % case 0
-   \def\math@OS#1{\PackageError{mt11p}{oldstyle digits not loaded for math}%
-                                     {Don't use the nomathOS option.}%
-                 {\hbox{\oldstylenums{#1}}}}% as good as anything else
-\or % case 1
-   \DeclareMathAlphabet\math@OS {OML}{cmm}{m}{it}
-   \SetMathAlphabet    \math@OS {normal}{OML}{cmm}{m}{it}
-   \SetMathAlphabet    \math@OS {bold}  {OML}{cmm}{b}{it}
-   \SetMathAlphabet    \math@OS {heavy} {OML}{cmm}{\hvdefault}{\itdefault}
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@osdg}%
-                {Oldsyle digits in math are hosed.}
-\fi
-\ifnum\mt@sub=1 % 
-   \InputIfFileExists{omlcmm.fd}\relax % grrr...
-                        {\InputIfFileExists{OMLcmm.fd}\relax
-                        {\PackageError{mt11p}{No OMLcmm.fd file}%
-                                 {Your are missing a basic distribution file. %
-                                              Check the LaTeX installation.}}}
-   \DeclareFontShape{OML}{cmm}{\hvdefault}{\itdefault}%
-                    {<->ssub*cmm/b/it}{}%      heavy cmmi SUBS
-\fi
-%    \end{macrocode}
-% The \cs{oldstylenums} macro just picks between
-% using the \texttt{OML}~font
-% as a text font, or the \cs{math@OS} math alphabet. If the argument
-% contains things other than digits, the result will be amusing\ldots
-%    \begin{macrocode}
-\def\oldstylenums#1{%
-     \ifmmode
-        \math@OS{#1}%
-     \else
-        {\usefont{OML}{cmm}{\f@series}{it}#1}%
-     \fi}
-%    \end{macrocode}
-%
-% \subsection{\cs{boldsymbol}  and \cs{heavysymbol}}
-% As mentioned above, we assumed that formul\ae{}
-% do not require simultaneous access to fonts in different math versions,
-% or, more precisely, that a single math list need not contain
-% several weights of, e.g., the \texttt{symbols} fonts.
-% In other words, that it is not worth while to
-% \emph{simultaneously} have
-% several weights of, e.g., the \texttt{symbols} fonts available as
-% ``\cs{mathchar}s''. Instead we fetch the \AmS~package
-% \pkg{amsbsy}, which defines a ``\cs{boldsymbol}''~macro
-% and define a similar ``\cs{heavysymbol}'' macro.
-% Don't do it if we're told not to, or if we can't find
-% \file{amsbsy.sty} and don't overwrite existing definitions.
-%    \begin{macrocode}
-\ifcase\mt@bsy % case 0
-   \providecommand{\boldsymbol}[1]{\PackageError{mt11p}%
-                               {Get or load the package amsbsy
-                                to use \string\boldsymbol}{See above.}#1\relax}
-   \providecommand{\heavysymbol}[1]{\PackageError{mt11p}%
-                               {Get or load the package amsbsy
-                                to use \string\heavysymbol}{See above.}#1\relax}
-   \providecommand{\normalsymbol}[1]{\PackageError{mt11p}%
-                               {Get or load the package amsbsy
-                                to use \string\normalsymbol}{See above.}#1\relax}
-\or % case 1
-   \IfFileExists{amsbsy.sty}%
-        {\RequirePackage{amsbsy}%
-         \DeclareRobustCommand{\heavysymbol}[1]{%
-             \begingroup
-             \let\@nomath\@gobble \mathversion{heavy}%
-             \math@atom{##1}{%
-             \mathchoice
-               {\hbox{$\m@th\displaystyle##1$}}%
-               {\hbox{$\m@th\textstyle##1$}}%
-               {\hbox{$\m@th\scriptstyle##1$}}%
-               {\hbox{$\m@th\scriptscriptstyle##1$}}}%
-             \endgroup}%
-         \DeclareRobustCommand{\normalsymbol}[1]{%
-             \begingroup
-             \let\@nomath\@gobble \mathversion{normal}%
-             \math@atom{##1}{%
-             \mathchoice
-               {\hbox{$\m@th\displaystyle##1$}}%
-               {\hbox{$\m@th\textstyle##1$}}%
-               {\hbox{$\m@th\scriptstyle##1$}}%
-               {\hbox{$\m@th\scriptscriptstyle##1$}}}%
-             \endgroup}%
-        }% using amsbsy.sty
-        {\PackageError{mt11p}{No file `amsbsy.sty' found}%
-                   {Use the `nobsy' option if you don't have or \MessageBreak
-                   don't want the AMS \string\boldsymbol\space macro.}
-        \let\boldsymbol\@firstofone
-        \let\heavysymbol\@firstofone
-        \let\normalsymbol\@firstofone
-        }% no amsbsy.sty
-\else % oops
-   \PackageError{mt11p}{PANIC: Unexpected value of \string\mt@bsy}%
-                {The \string\boldsymbol\space macro is probably hosed.}
-\fi
-%    \end{macrocode}
-%
-% \subsection{Examples of new math symbol definitions}
-% \label{unused}
-% Note that code in this section, and some of the code in
-% the following sections is not included in the package
-% \file{.sty}~file. It's meant as an example of things that
-% could be put into a \file{mt11p.cfg}~file.
-%
-% Here follow a few examples of defining more
-% math symbols in order to easily and efficiently
-% mix symbols normally found in different math versions.
-% Note that it is rarely worth it perform such
-% definitions---not even the \AmS~document classes
-% do it. For more details about NFSS see the
-% standard \LaTeX{} documentation file~\file{fntguide.tex}.
-%
-% \paragraph{Upright lower case Greek letters as symbols.}
-% The font set includes a \texttt{letters} font with
-% upright lower case Greek letters~(l.c.G.)\@.
-% Usually \textit{italic\/} or \textsl{slanted\/} l.c.G.~are used as
-% symbols, though
-% recently it's possible see the \textsc{Post\-Script}
-% \texttt{Symbols}~font
-% (upright; noone bothers to skew it)
-% used a lot, but that is a more a sign of weak software.
-% The upright l.c.G.~letters are made available in both text and
-% math (Sec.\,\ref{par:mathgr}).
-% It would be possible to make them available as math
-% \emph{symbols} by using the code below.
-% (The code is not available as an option, because there is no common definition
-% for how the symbols should be named; for illustration we call the symbols
-% \cs{upalpha}\@, \cs{upbeta}\@, etc.)
-%
-% First define a math symbol font:
-% \begin{verbatim}
-% \DeclareSymbolFont{upgreek}{LmtL}{mtl}{\mddefault}{\uidefault}
-% \end{verbatim}
-% Don't redefine \cs{mathgr} to point to the \texttt{upgreek}~family,
-% because the encodings aren't even close.
-%
-% Next set the math versions:
-% \begin{verbatim}
-% \SetSymbolFont{upgreek}{normal}{LmtL}{mtl}{\mddefault}{\uidefault}
-% \SetSymbolFont{upgreek}{bold}{LmtL}{mtl}{\bfdefault}{\uidefault}
-% \SetSymbolFont{upgreek}{heavy}{LmtL}{mtl}{\hvdefault}{\uidefault}
-% \end{verbatim}
-% If this step is omitted, the \texttt{upgreek} symbol font family
-% will be the same in all math versions.
-%
-% Lastly, make the symbol declarations (choose names that don't conflict with
-% existing symbols):
-% \begin{verbatim}
-% \DeclareMathSymbol{\upalpha}{\mathord}{upgreek}{"0B}
-% \DeclareMathSymbol{\upbeta}{\mathord}{upgreek}{"0C}
-% \DeclareMathSymbol{\upgamma}{\mathord}{upgreek}{"0D}
-% \DeclareMathSymbol{\updelta}{\mathord}{upgreek}{"0E}
-% \DeclareMathSymbol{\upepsilon}{\mathord}{upgreek}{"0F}
-% \DeclareMathSymbol{\upzeta}{\mathord}{upgreek}{"10}
-% \DeclareMathSymbol{\upeta}{\mathord}{upgreek}{"11}
-% \DeclareMathSymbol{\uptheta}{\mathord}{upgreek}{"12}
-% \DeclareMathSymbol{\upiota}{\mathord}{upgreek}{"13}
-% \DeclareMathSymbol{\upkappa}{\mathord}{upgreek}{"14}
-% \DeclareMathSymbol{\uplambda}{\mathord}{upgreek}{"15}
-% \DeclareMathSymbol{\upmu}{\mathord}{upgreek}{"16}
-% \DeclareMathSymbol{\upnu}{\mathord}{upgreek}{"17}
-% \DeclareMathSymbol{\upxi}{\mathord}{upgreek}{"18}
-% \DeclareMathSymbol{\uppi}{\mathord}{upgreek}{"19}
-% \DeclareMathSymbol{\uprho}{\mathord}{upgreek}{"1A}
-% \DeclareMathSymbol{\upsigma}{\mathord}{upgreek}{"1B}
-% \DeclareMathSymbol{\uptau}{\mathord}{upgreek}{"1C}
-% \DeclareMathSymbol{\upupsilon}{\mathord}{upgreek}{"1D}
-% \DeclareMathSymbol{\upphi}{\mathord}{upgreek}{"1E}
-% \DeclareMathSymbol{\upchi}{\mathord}{upgreek}{"1F}
-% \DeclareMathSymbol{\uppsi}{\mathord}{upgreek}{"20}
-% \DeclareMathSymbol{\upomega}{\mathord}{upgreek}{"21}
-% \DeclareMathSymbol{\upvarepsilon}{\mathord}{upgreek}{"22}
-% \DeclareMathSymbol{\upvartheta}{\mathord}{upgreek}{"23}
-% \DeclareMathSymbol{\upvarpi}{\mathord}{upgreek}{"24}
-% \DeclareMathSymbol{\upvarrho}{\mathord}{upgreek}{"25}
-% \DeclareMathSymbol{\upvarsigma}{\mathord}{upgreek}{"26}
-% \DeclareMathSymbol{\upvarphi}{\mathord}{upgreek}{"27}
-% \DeclareMathSymbol{\upvarkappa}{\mathord}{upgreek}{'176}
-% \end{verbatim}
-% That is the complete set; of course, you need not define them all.
-%
-% Additional \textbf{math accents} can be defined
-% in an entirely analogous way by using \cs{DeclareMathAccent}.
-% NFSS~can define two types of accents:
-% \cs{mathord}, which are taken from a fixed font, and
-% \cs{mathalpha}, which change with math alphabets.
-% A specially declared accent will probably be~\cs{mathord};
-% do not use~\cs{mathalpha} unles you know what you're doing.
-% An example for
-% a math symbol font family called~\texttt{boldsyms}
-% which has an accent in slot~\texttt{"52} is
-% \begin{verbatim}
-% \DeclareMathAccent{\boldddot}{\mathord}{boldsyms}{"52}
-% \end{verbatim}
-% 
-% \paragraph{Declaring additional math delimiters}
-% Although any combination of symbols from various
-% math versions can be achieved through the use of
-% \cs{boldsymbol} and \cs{heavysymbol}, it can be
-% inefficient and awkward to have to do so frequently.
-% Particularly tedious are delimiters,
-% which either require freezing their
-% size~(|\boldsymbol{\Bigg(}|), or cryptic constructs
-% involving~\cs{vphantom}s.
-% In this case it is also possible to define special math symbols
-% that work as expected. The procedure is similar to the one
-% for declaring upright Greek letters as symbols, an outline follows.
-% \TeX's math workings are described in D.\,E.\,Knuth's
-% \emph{The \TeX book} and, e.g., in \emph{\TeX~by topic}
-% by V.\,Eijkhout.
-%
-% First declare a new symbol font, e.g.,
-% \begin{verbatim}
-% \DeclareSymbolFont{hvlargesymbols}{OMX}{mtx}{\hvdefault}{\updefault}
-% \end{verbatim}
-% Next define the delimiter itself:
-% \begin{center}
-%     \centerline{\cs{DeclareMathDelimiter}\brarg{cmd}\brarg{math\,type}%
-%     \brarg{small}\brarg{small\,slot}\brarg{large}\brarg{large\,slot}}
-% \end{center}
-% where \brarg{small} and \brarg{large} are two symbol font math families.
-% If you're defining a new delimiter from some special font,
-% you probably only have one variant (or more precisely one chain
-% of linked delimiters).
-% This command does not allow making a variant null~(\texttt{000})
-% without assuming that \texttt{operators} is math family~\texttt0,
-% but it is possible to make sure the small variant ``succeeds''
-% in finding a delimiter
-% (e.g., an extensible delimiter will always terminate a search),
-% so that the large variant is irrelevant.
-%
-% For example, assuming there is a math symbol font family
-% called \texttt{hvlargesymbols} (see above),
-% \cs{lbraceHV} and \cs{rbraceHV}
-% will produce correctly sized heavy braces:
-% \begin{verbatim}
-% \DeclareMathDelimiter{\lbraceHV}{\mathopen}{hvlargesymbols}{"08}%
-%                                            {hvlargesymbols}{"08}
-% \DeclareMathDelimiter{\lbraceHV}{\mathclose}{hvlargesymbols}{"09}%
-%                                            {hvlargesymbols}{"09}
-% \end{verbatim}
-% (The small and large variants are identical, but since the small
-% one will always
-% succeed---the last delimiter in the chain is extendible---the
-% large one never comes into play.)
-% \cs{delcode}s are not normally changed.
-%
-% \paragraph{Running out of math families}
-% \TeX{} with NFSS is limited to 16~math font families
-% in any single math version, and
-% it's not all too difficult
-% to run into the limit. With the default options,
-% it's possible to load \emph{four} more math symbol fonts/alphabets.
-% (A \cs{DeclareSymbolFont} and an accompanying
-% \cs{DeclareSymbolFontAlphabet} take up one family.)
-% The options \texttt{nomathgr} and \texttt{nomathOS}
-% will each cause one less math family to be used.
-% The \texttt{cmcal}~option uses one math family more
-% than \texttt{mtcal} or~\texttt{nomtms} (as long as \texttt{8r}
-% is~\textsc{ok} for the four infamous symbols).
-% If you do run out of math families, declare a new math version,
-% or define infrequently used symbols as explicit font/character
-% references in text mode (in an~\cs{hbox}), possibly
-% wrapped in \cs{mathchoice} and an explicit class command,
-% e.g.,~\cs{mathbin}. See~\file{fntguide.tex}.
-%
-% \subsection{Unused glyphs}\label{realunused}
-% This package leaves no unique MathT\i me glyphs inaccessible.
-% A few glyphs are repeated more than once in a font, or are present
-% in more than one font. It makes no difference to \TeX~whether
-% a font is taken from \texttt{letters} or~\texttt{symbols}.
-%
-% It would be possible to take the small square root sign
-% from the \texttt{largesymbols}
-% font, rather than from the \texttt{symbols} font.
-% That \texttt{largesymbols} radical
-% (\texttt{"9F}) is, however, completely identical
-% to the one in \texttt{symbols}, so it's
-% rather pointless. The command would be
-% \begin{verbatim}
-% \DeclareMathRadical{\sqrtsign}{largesymbols}{"9F}{largesymbols}{"70}
-% \end{verbatim}
-% The extra root sign in \texttt{mtsyn} (not present
-% in~\texttt{mtsy}) is identical to the usual one, except for a
-% vertical shift. Since a `radical' sign is normally of
-% class~\texttt1~(\cs{mathop}),
-% it gets vertically centered anyway. This alternate radical glyph could be
-% used by defining something like
-% \begin{verbatim}
-% \DeclareMathSymbol{\varsurd}{\mathop}{symbols}{"84}
-% \end{verbatim}
-%
-% \subsection{\texttt{muskip} Assignments} A little smaller than for Computer Modern.
-% The original setting is
-% \begin{verbatim}
-% \thinmuskip=3mu
-% \medmuskip=4mu plus 2mu minus 4mu
-% \thickmuskip=5mu plus 5mu
-% \end{verbatim}
-% and we'll use
-%    \begin{macrocode*}
-\thinmuskip=2mu \relax
-\medmuskip=2.5mu plus 1mu minus 1mu \relax
-\thickmuskip=4mu plus 1.5mu minus 1mu \relax
-%    \end{macrocode*}
-%
-% \subsection{Local Configuration File}
-% Provide a hook to load anything important or complicated
-% enough to be inappropriate for the main input file.
-%    \begin{macrocode}
-\InputIfFileExists{mt11p.cfg}%
-           {\typeout{**************************************^^J%
-                     * Local config file mt11p.cfg loaded *^^J%
-                     **************************************}%
-            }{}
-%    \end{macrocode}
-%
-% \subsection{Cleanup}
-% Do the resizing now:
-%    \begin{macrocode}
-\mt@exit
-%    \end{macrocode}
-% Restore any crazy catcodes.
-%    \begin{macrocode}
-\catcode`\"\mt@quotedbl
-\catcode`\'\mt@quotesinglr
-\catcode`\:\mt@colon
-\catcode`\?\mt@question 
-\catcode`\;\mt@semicolon 
-\catcode`\!\mt@exclam
-%    \end{macrocode}
-% Make the various scratch macros, etc., we used \cs{undefined},
-% but keep \cs{mt@cal} and \cs{mt@ops}, in case we need to
-% decide something based on them. A `real' input file should
-% not do such a thing, but a demo document might.
-%    \begin{macrocode}
-\let\mt@quotedbl  \undefined
-\let\mt@quotesinglr\undefined
-\let\mt@colon     \undefined
-\let\mt@question  \undefined
-\let\mt@semicolon \undefined
-\let\mt@exclam    \undefined
-\let\mt@exit      \undefined
-\let\MathTimeSizes\undefine
-\let\mt@enc       \undefined
-\let\times@style  \undefined
-\let\mt@fd@check  \undefined
-\let\mt@accs      \undefined
-\let\mt@accent@make\undefined
-\let\mt@hbar      \undefined
-\let\mt@eightR    \undefined
-\let\mt@bsy       \undefined
-\let\mt@sb        \undefined
-\let\mt@mgrs      \undefined
-\let\mt@osdg      \undefined
-\let\mt@assign@del\undefined
- %\let\mt@cal       \undefined
- %\let\mt@ops       \undefined
-%    \end{macrocode}
-% \ldots and we're done.
-%
-% \Finale
diff --git a/Master/texmf-dist/source/latex/mt11p/mt11p.ins b/Master/texmf-dist/source/latex/mt11p/mt11p.ins
deleted file mode 100644
index 77375810f8b..00000000000
--- a/Master/texmf-dist/source/latex/mt11p/mt11p.ins
+++ /dev/null
@@ -1,50 +0,0 @@
-%
-% This is mt11p.ins, a simple docstrip batch file
-% for stripping mt11.sty out from mt11p.dtx
-%
-% The dtx file is rigged so that LaTeXing it will
-% produce \OnlyDescription; LaTeXing the drv file
-% does the whole thing.
-%
-%
-\def\batchfile{mt11p.ins}
-\input docstrip.tex
-\keepsilent
-\generateFile{mt11p.sty}{f}{\from{mt11p.dtx}{package}}
-\generateFile{mt11p.drv}{f}{\from{mt11p.dtx}{driver}}
-\endinput
-%
-%%
-%% mt11p.ins
-%% Copyright 1997, 2002 Drahoslav L\'im
-%% 
-%% This program may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.2
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.2 or later is part of all distributions of LaTeX 
-%% version 1999/12/01 or later.
-%% 
-%% This program consists of the following files:
-%% mt11p.dtx
-%% mt11p.ins (this file)
-%% mt11p.ps (formatted documentation)
-%% mt11p.map
-%% the binary tfm files:
-%%              mtex.tfm mtexb.tfm mtexh.tfm mtgu.tfm
-%%              mtgub.tfm mtmi.tfm mtmib.tfm mtmih.tfm
-%%              mtms.tfm mtmsb.tfm mtmu.tfm mtmub.tfm
-%%              mtmuh.tfm mtsyb.tfm mtsyh.tfm mtsyn.tfm
-%%              rmtmi.tfm rmtmib.tfm rmtmih.tfm rmtmub.tfm
-%%              rmtmuh.tfm
-%% 
-%% the binary vf files:
-%%              mtmi.vf mtmib.vf mtmih.vf mtmu.vf
-%%              mtmub.vf mtmuh.vf
-%%
-%% Use at your own risk.
-%%
-%% Send bug reports to DrahoslavL@seznam.cz
-%%
-