mh (10may12)

git-svn-id: svn://tug.org/texlive/trunk@26294 c570f23f-e606-0410-a88d-b1316a301751

6 files changed, 709 insertions, 161 deletions

diff --git a/Master/texmf-dist/source/latex/mh/breqn.dtx b/Master/texmf-dist/source/latex/mh/breqn.dtx
index d1bc7151b99..1a29cd69d1f 100644
--- a/Master/texmf-dist/source/latex/mh/breqn.dtx
+++ b/Master/texmf-dist/source/latex/mh/breqn.dtx
@@ -1,7 +1,7 @@
 % \iffalse meta-comment
 %
 % Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
 % Lars Madsen, Will Robertson and Joseph Wright.
 %
 % This work consists of the main source file breqn.dtx
@@ -68,7 +68,7 @@
 \input docstrip.tex
 \Msg{************************************************************************}
 \Msg{* Installation}
-\Msg{* Package: breqn 2008/07/28 v0.98 Breqn (MH)}
+\Msg{* Package: breqn 2012/05/10 v0.98b Breqn}
 \Msg{************************************************************************}
 
 \keepsilent
@@ -79,7 +79,7 @@
 This is a generated file.
 
 Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2008 by Morten Hoegholm
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -91,7 +91,7 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainers of this work is 
 Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file breqn.dtx
@@ -130,7 +130,7 @@ and the derived files
 %<*driver>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesFile{breqn.drv}%
-  [2008/07/28 v0.98 breqn (MH)]
+  [2012/05/10 v0.98b breqn]
 \documentclass{ltxdoc}
 \CodelineIndex
 \EnableCrossrefs
@@ -232,8 +232,10 @@ and the derived files
 % \fi
 %
 % \title{The \pkg{breqn} package}
-% \date{2008/07/28 v0.98}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \date{2012/05/10 v0.98b}
+% \author{The breqn maintainers\thanks{The maintainers would like to thank
+%  Morten H\o gholm for bringing \texttt{breqn} forward}
+% \\\texttt{mh.ctan@gmail.com}}
 %
 % \maketitle
 % \begin{abstract}
@@ -251,16 +253,17 @@ and the derived files
 % the \TeX\ world---Michael passed away in early 2003 at the age of
 % only~44.
 %
-% The American Mathematical Society has kindly allowed me to assume
-% maintainership of this part of his work and I wish to express my
-% gratitude to them and to Barbara Beeton in particular for providing
-% me with the files I needed.
+% The American Mathematical Society kindly allowed Morten H\o gholm to
+% assume maintainership of this part of his work and he wish to
+% express my gratitude to them and to Barbara Beeton in particular for
+% providing me with the files he needed.
 %
-% I hope to continue Michael's work, thereby allowing users to create
+% MH hope to continue Michael's work, thereby allowing users to create
 % more \emph{masterpieces of the publishing art} as I think he would
 % have wanted.
 %
-% 
+% Following the July 2008 breqn release, breqn was left in the hands
+% of a maintenance team, while MH moved on with other projects.
 %
 % \section{Package loading}
 %
@@ -1013,7 +1016,12 @@ and the derived files
 % Declare package name and date.   
 %    \begin{macrocode}
 \RequirePackage{expl3}[2009/08/05]
-\ProvidesExplPackage{breqn}{2009/08/07}{0.98a}{Breaking equations}
+\ProvidesExplPackage{breqn}{2012/05/10}{0.98b}{Breaking equations}
+%    \end{macrocode}
+%   Regrettably, \pkg{breqn} is internally a mess, so we have to take
+%   some odd steps.
+%    \begin{macrocode}
+\ExplSyntaxOff
 %    \end{macrocode}
 %
 %
@@ -1514,6 +1522,7 @@ and the derived files
     \splitfirstmark{\string\splitfirstmark:}%
     \splitbotmark{\string\splitbotmark:}%
     #1{\string#1}%
+    \@nil % for the \@car
   \edef\@tempa{\expandafter\strip@prefix\meaning\@tempb}%
   \edef\@tempb{\meaning#1}%
   \ifx\@tempa\@tempb \global\let#2#1%
@@ -4759,24 +4768,19 @@ and the derived files
 % \end{macro}
 % 
 % 
+% \begin{macro}{\true@true@true}
 % \begin{macro}{\true@false@true}
-%    \begin{macrocode}
-\def\true@false@true{\fi\fi\iftrue\iffalse\iftrue}
-%    \end{macrocode}
-% \end{macro}
-% 
-% 
+% \begin{macro}{\false@true@false}
 % \begin{macro}{\false@false@false}
 %    \begin{macrocode}
+\def\true@true@true   {\fi\fi\iftrue \iftrue \iftrue }
+\def\true@false@true  {\fi\fi\iftrue \iffalse\iftrue }
+\def\false@true@false {\fi\fi\iffalse\iftrue \iffalse}
 \def\false@false@false{\fi\fi\iffalse\iffalse\iffalse}
 %    \end{macrocode}
 % \end{macro}
-% 
-% 
-% \begin{macro}{\false@true@false}
-%    \begin{macrocode}
-\def\false@true@false{\fi\fi\iffalse\iftrue\iffalse}
-%    \end{macrocode}
+% \end{macro}
+% \end{macro}
 % \end{macro}
 % 
 % 
diff --git a/Master/texmf-dist/source/latex/mh/empheq.dtx b/Master/texmf-dist/source/latex/mh/empheq.dtx
index 8f46877b052..8d598a56b02 100644
--- a/Master/texmf-dist/source/latex/mh/empheq.dtx
+++ b/Master/texmf-dist/source/latex/mh/empheq.dtx
@@ -1,6 +1,6 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2002-2007 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2002-2007 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -12,7 +12,8 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm.
+% This Current Maintainer of this work is
+% Lars Madsen, Will Robertson and Joseph Wright.
 %
 % This work consists of the main source file empheq.dtx
 % and the derived files
@@ -76,7 +77,7 @@
 
 This is a generated file.
 
-Copyright (C) 2002-2007 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2007 by Morten Hoegholm
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -88,7 +89,8 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm.
+This Current Maintainer of this work is
+Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file empheq.dtx
 and the derived files
@@ -126,7 +128,7 @@ and the derived files
 %<*driver>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesFile{empheq.drv}%
-  [2007/12/03 v2.12 Emphasizing equations (MH)]
+  [2012/05/09 v2.13 Emphasizing equations]
 \documentclass{ltxdoc}
 \usepackage{mathpazo}
 \usepackage[overload]{empheq}
@@ -356,7 +358,10 @@ and the derived files
 %  \title{The \pkg{empheq} package\thanks{This file has version number
 %  \fileversion, last revised \filedate.}\\
 %  Emphasizing equations in \LaTeXe}
-%  \author{Morten H\o gholm}
+%  \author{Lars Madsen, Will Robertson and Joseph
+%  Wright\\ (maintainers)\thanks{The maintainers would like to thank
+%  Morten H\o gholm for his contributions to this package}}
+%  
 %  \date{\filedate}
 %
 %  \maketitle
@@ -1141,6 +1146,23 @@ and the derived files
 %
 %  \subsection{Support for \pkg{ntheorem}}\label{sec:ntheorem-support}
 %
+% \changes{v2.13}{2012/05/09}{Added caveat}
+%  \textbf{Caveat:} Due to an unfortunate interaction between \pkg{empheq} and
+%  \pkg{ntheorem}, users may want to add
+% \begin{verbatim}
+% \usetagform{default}
+% \end{verbatim}
+%  \emph{after} loading \pkg{ntheorem} otherwise the tags may be
+%  placed wrong and any labels within the \env{empheq} environment may
+%  be lost. In the future \pkg{ntheorem} should be able to test for
+%  this and add \verb|\usetagform{default}| automatically.
+%
+%  Users who use \verb|\usetagform| to get another tag design, should
+%  make sure to postpone this configuration until \emph{after} loading
+%  \pkg{ntheorem}. 
+%
+% \bigskip
+%
 %  \changes{v2.00}{2004/04/14}{Added description of the
 %  \opt{ntheorem} option}
 %  \changes{v1.05}{2004/02/16}{Added support for the end-of-theorem
@@ -1545,7 +1567,7 @@ and the derived files
 %  \section{Contact information}
 %
 %  Should you have any feature request, suggestions, or bug reports
-%  then feel free to contact me at
+%  then feel free to contact us at
 %  \begin{quote}
 %    \email{mh.ctan@gmail.com}
 %  \end{quote}
diff --git a/Master/texmf-dist/source/latex/mh/flexisym.dtx b/Master/texmf-dist/source/latex/mh/flexisym.dtx
index 0f804a1d3fe..7b4df2f5abc 100644
--- a/Master/texmf-dist/source/latex/mh/flexisym.dtx
+++ b/Master/texmf-dist/source/latex/mh/flexisym.dtx
@@ -1,7 +1,7 @@
 % \iffalse meta-comment
 %
 % Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
 % Lars Madsen, Will Robertson and Joseph Wright.
 %
 % This work consists of the main source file flexisym.dtx
@@ -84,7 +84,7 @@
 This is a generated file.
 
 Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2010 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2010 by Morten Hoegholm
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -96,7 +96,7 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm, 
+This Current Maintainer of this work is 
 Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file flexisym.dtx
@@ -166,7 +166,7 @@ and the derived files
 %
 % \title{The \textsf{flexisym} package}
 % \date{2008/08/08 v0.97a}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \author{Morten H\o gholm \\Maintainers: \texttt{mh.ctan@gmail.com}}
 %
 % \maketitle
 %
diff --git a/Master/texmf-dist/source/latex/mh/mathstyle.dtx b/Master/texmf-dist/source/latex/mh/mathstyle.dtx
index 4e21d9853bc..a3d33a58efa 100644
--- a/Master/texmf-dist/source/latex/mh/mathstyle.dtx
+++ b/Master/texmf-dist/source/latex/mh/mathstyle.dtx
@@ -1,7 +1,7 @@
 % \iffalse meta-comment
 %
 % Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm, 
+% This Current Maintainer of this work is 
 % Lars Madsen, Will Robertson and Joseph Wright.
 %
 % This work consists of the main source file mathstyle.dtx
@@ -67,8 +67,7 @@
 %<*install>
 \input docstrip.tex
 \Msg{************************************************************************}
-\Msg{* Installation}
-\Msg{* Package: mathstyle 2008/11/25 v0.88 Mathstyle (MH)}
+\Msg{* Installation for package: mathstyle}
 \Msg{************************************************************************}
 
 \keepsilent
@@ -79,7 +78,7 @@
 This is a generated file.
 
 Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2011 by Morten Hoegholm et al
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -91,7 +90,7 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is
 Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file mathstyle.dtx
@@ -127,10 +126,16 @@ and the derived files
 %<*ignore>
 \fi
 %</ignore>
+%
+%<*driver>
+\ProvidesFile{mathstyle.drv}
+%</driver>
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{mathstyle}
+%<*package|driver>
+  [2011/08/03 v0.90 Tracking mathstyle implicitly]
+%</package|driver>
 %<*driver>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesFile{mathstyle.drv}%
-  [2008/11/25 v0.88 mathstyle (MH)]
 \documentclass{ltxdoc}
 \CodelineIndex
 \EnableCrossrefs
@@ -142,9 +147,10 @@ and the derived files
 %</driver>
 % \fi
 %
+% \GetFileInfo{mathstyle.drv}
 % \title{The \textsf{mathstyle} package}
-% \date{2008/08/13 v0.87}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \date{\filedate\quad\fileversion}
+% \author{Morten H\o gholm \\Maintainers: \texttt{mh.ctan@gmail.com}}
 %
 %
 % \maketitle
@@ -199,17 +205,42 @@ and the derived files
 %   #1 {}\rlap{$\m@th \currentmathstyle {#2}$}}
 % \end{verbatim}
 %
+% \subsection{Package options}
 %
+% This package has one set of options affecting the \verb|_| and \verb|^| characters:
 %
-% \StopEventually{}
-% \part*{Implementation}
+% \begin{itemize}
+% \item\verb|\usepackage[mathactivechars]{mathstyle}|
+%
+% This is the default behaviour. Here, \verb|_| and \verb|^| are made into harmless
+% characters in text mode and behave as expected (for entering sub/superscript) when
+% inside math mode.
+% Certain code that assumes the catcodes of these characters may get confused about
+% this; see below for a possible fix.
 %
+% \item\verb|\usepackage[activechars]{mathstyle}|
 %
+% With this option, \verb|_| and \verb|^| are made into active characters for
+% entering sub/superscript mode in all cases---therefore, in text mode they will
+% produce a regular error (`Missing \$ inserted') indicating they are being used
+% out of place.
+%
+% \item\verb|\usepackage[noactivechars]{mathstyle}|
+%
+% This is the option most like to solve any compatibility problems. Here,
+% \verb|_| and \verb|^| retain their regular catcodes at all times and behave
+% in their default fashion. \textbf{However}, certain other features of this
+% package (such as \cs{currentmathstyle} inside a subscript) will then fail
+% to work, so only use this option as a last resort.
+% \end{itemize}
+%
+% \StopEventually{}
+% \part*{Implementation}
 %
 %    \begin{macrocode}
 %<*package>
-\ProvidesPackage{mathstyle}[2010/11/17 v0.89]
 %    \end{macrocode}
+%
 % \begin{macro}{\@saveprimitive}
 %   A straight copy from \pkg{breqn}, see implementation details
 %   there.  Of course, with a recent pdf\TeX\ (v1.40+), one can just
@@ -238,6 +269,7 @@ and the derived files
     \splitfirstmark{\string\splitfirstmark:}%
     \splitbotmark{\string\splitbotmark:}%
     #1{\string#1}%
+    \@nil % for the \@car
   \edef\@tempa{\expandafter\strip@prefix\meaning\@tempb}%
   \edef\@tempb{\meaning#1}%
   \ifx\@tempa\@tempb \global\let#2#1%
@@ -251,10 +283,27 @@ and the derived files
 }
 %    \end{macrocode}
 % \end{macro}
-% Do initial \cs{chardef} of \cs{mathstyle}.
+%
+% \begin{macro}{\everydisplay}
+% We need to keep track of whether we're in inline or display maths, and the only
+% way to do that is to add a switch inside \verb|\everydisplay|.
+% We act sensibly and preserve any of the previous contents of that token register
+% before adding our own code here.
 %    \begin{macrocode}
-\chardef\mathstyle=\z@
+\everydisplay=\expandafter{\the\everydisplay\chardef\mathstyle\z@}
 %    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mathstyle}
+% A counter for the math style: 0--display, 1--text, 2--script, 3--scriptscript.
+% The logic is that display maths will explicitly
+% set \verb|\mathstyle| to zero (see above), so by default it is set to the
+% `text' maths style.
+%    \begin{macrocode}
+\chardef\mathstyle\@ne
+%    \end{macrocode}
+% \end{macro}
+%
 % Save the four style changing primitives, \cs{mathchoice} and the
 % fraction commands.
 %    \begin{macrocode}
@@ -315,6 +364,8 @@ and the derived files
 \def\sb#1{\mathsub{\protect\subsupstyle#1}}%
 \def\sp#1{\mathsup{\protect\subsupstyle#1}}%
 %    \end{macrocode}
+%
+% \begin{macro}{\mathchoice}
 % \cs{mathchoice} is now just a switch. Note that this redefinition
 % does not allow the arbitrary \meta{filler} of the \TeX\
 % primitive. Very rarely used anyway.
@@ -338,17 +389,26 @@ and the derived files
 \providecommand\@thirdoffour[4]{#3}
 \providecommand\@fourthoffour[4]{#4}
 %    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\genfrac}
 % The fractions. Note that this uses the same names as in
 % \pkg{amsmath}. Much the same except here they call \cs{fracstyle}.
 %    \begin{macrocode}
 \DeclareRobustCommand\genfrac[6]{%
-  {\fracstyle #1%
+  {#1\fracstyle
     {\begingroup #5\endgroup
       \csname @@\ifx\maxdimen#4\maxdimen over\else above\fi
         \if @#2@\else withdelims\fi\endcsname #2#3#4\relax
      #6}%
   }%
 }
+%    \end{macrocode}
+% \changes{v0.90}{2011/08/03}{\cs{fracstyle} must be called \emph{after}
+%   changing to the required style}
+% \end{macro}
+%
+%    \begin{macrocode}
 \renewcommand{\frac}{\genfrac{}{}{}{}}
 \providecommand{\dfrac}{}
 \providecommand{\tfrac}{}
diff --git a/Master/texmf-dist/source/latex/mh/mathtools.dtx b/Master/texmf-dist/source/latex/mh/mathtools.dtx
index ef5dea37965..6c76f41d408 100644
--- a/Master/texmf-dist/source/latex/mh/mathtools.dtx
+++ b/Master/texmf-dist/source/latex/mh/mathtools.dtx
@@ -1,6 +1,6 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2004-2011 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2004-2011 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -12,7 +12,8 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm.
+% This Current Maintainer of this work is
+% Lars Madsen, Will Robertson and Joseph Wright
 %
 % This work consists of the main source file mathtools.dtx
 % and the derived files
@@ -66,7 +67,7 @@
 \input docstrip.tex
 \Msg{************************************************************************}
 \Msg{* Installation}
-\Msg{* Package: mathtools 2011/04/06 v1.11}
+\Msg{* Package: mathtools 2012/05/10 v1.12}
 \Msg{************************************************************************}
 
 \keepsilent
@@ -76,7 +77,7 @@
 
 This is a generated file.
 
-Copyright (C) 2002-2011 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2011 by Morten Hoegholm
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -88,7 +89,7 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm, 
+This Current Maintainer of this work is  
 Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file mathtools.dtx
@@ -127,7 +128,7 @@ and the derived files
 %<*driver>
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesFile{mathtools.drv}%
-  [2011/04/06 v1.11 mathematical typesetting tools]
+  [2012/05/10 v1.12 mathematical typesetting tools]
 \documentclass{ltxdoc}
 \IfFileExists{fourier.sty}{\usepackage{fourier}}{}
 \addtolength\marginparwidth{-25pt}
@@ -172,6 +173,7 @@ and the derived files
   }%
 }
 
+
 \newcommand*\ProvidedBy[2]{%
   \hskip1sp
   \marginpar{%
@@ -190,6 +192,16 @@ and the derived files
   }%
 }
 
+\newcommand*\tsxPosting[2]{%
+  \hskip1sp
+  \marginpar{%
+    \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
+     \strut Posted on \texttt{\small tex.stackexchange.com} \\#1\\#2%
+    }%
+  }%
+}
+
+
 \expandafter\def\expandafter\MakePrivateLetters\expandafter{%
   \MakePrivateLetters  \catcode`\_=11\relax
 }
@@ -258,13 +270,14 @@ and the derived files
 %
 %  \GetFileInfo{mathtools.drv}
 %
-%  \CheckSum{2584}
+%  \CheckSum{2836}
 %
 %  \title{The \pkg{mathtools} package\thanks{This file has version number
 %  \fileversion, last revised \filedate.}}
 %
-%  \author{Morten H\o gholm, Lars Madsen,\\ Will Robertson and Joseph
-%  Wright\\ (maintainers)}
+%  \author{Lars Madsen, Will Robertson and Joseph
+%  Wright\\ (maintainers)\thanks{The maintainers would like to thank
+%  Morten H\o gholm for his contributions to this package}}
 %  \date{\filedate}
 %
 %  \maketitle
@@ -275,7 +288,7 @@ and the derived files
 %    1)~correct various bugs/defeciencies in \pkg{amsmath} until
 %    these are fixed by the \AmS{} and 2)~provide useful tools
 %    for mathematical typesetting, be it a small macro for
-%    typesetting a prescript or an underbraket, or entirely new
+%    typesetting a prescript or an underbracket, or entirely new
 %    display math constructs such as a \env{multlined} environment.
 %  \end{abstract}
 %
@@ -358,7 +371,7 @@ and the derived files
 %        [v] = 200
 %      \end{gathered}
 %  \]
-%  Yes, the \texttt[p] has been gobbled without any warning
+%  Yes, the \texttt{[p]} has been gobbled without any warning
 %  whatsoever.\footnote{\pkg{amsmath} thought the \texttt[p] was an
 %  optional argument, checked if it was \texttt{t} or \texttt{b} and
 %  when both tests failed, assumed it was a \texttt{c}.} This is
@@ -386,7 +399,7 @@ and the derived files
 %  \begin{codesyntax}
 %    \SpecialUsageIndex{\mathtoolsset}\cs{mathtoolsset}\marg{key val list}
 %  \end{codesyntax}
-%  Many of the tools shown in this manual can be turned on and off be
+%  Many of the tools shown in this manual can be turned on and off by
 %  setting a switch to either true or false. In all cases it is done
 %  with the command \cs{mathtoolsset}. A typical use could be something like
 %  \begin{verbatim}
@@ -446,7 +459,7 @@ and the derived files
 %  these macros I find it better to read the article; an online
 %  version can be found at
 %  \begin{quote}
-%    \url{http://www.tug.org/TUboat/Articles/tb22-4/tb72perlS.pdf}
+%    \url{http://www.tug.org/TUGboat/Articles/tb22-4/tb72perlS.pdf}
 %  \end{quote}
 %  Note that the definitions shown in the article do not exactly
 %  match the definitions in \pkg{mathtools}. Besides providing an
@@ -650,6 +663,8 @@ and the derived files
 %  command \cs{adjustlimits} is useful in these cases, as you can
 %  just put it in front of these consecutive operators and it'll make
 %  the limits line up.
+%  \medskip\par\noindent
+%  \begin{minipage}{\textwidth}
 %  \begin{verbatim}
 %    \[
 %      \text{a)} \adjustlimits\lim_{n\to\infty} \max_{p\ge n} \quad
@@ -658,7 +673,8 @@ and the derived files
 %      \text{d)} \adjustlimits\limsup_{n\to\infty} \max_{p\ge n}
 %    \]
 %  \end{verbatim}
-%    \[
+%  \end{minipage}
+%  \[
 %      \text{a)} \adjustlimits\lim_{n\to\infty} \max_{p\ge n} \quad
 %      \text{b)} \adjustlimits\lim_{n\to\infty} \max_{p^2\ge n} \quad
 %      \text{c)} \adjustlimits\lim_{n\to\infty} \sup_{p^2\ge nK} \quad
@@ -667,6 +683,42 @@ and the derived files
 %  The use of \cs{sb} instead of \texttt{\_} is allowed.
 %
 %
+%  \subsubsection{Swapping space above \texorpdfstring{\AmS}{AMS} display math environments }
+%  \label{sec:swapping}
+%
+%  One feature that the plain old \env{equation} environment has that
+%  the \AmS\ environments does not (because of thechnical reasons), is
+%  the feature of using less space above the equation if the situation
+%  presents itself. The \AmS\ environments cannot do this, but one can
+%  manually, using  
+%  \begin{codesyntax}
+%    \SpecialUsageIndex{\SwapAboveDisplaySkip}
+%    \cs{SwapAboveDisplaySkip}
+%  \end{codesyntax}
+%  as the very first content within an \AmS\ display math
+%  environment. It will then issue an \cs{abovedisplayshortskip}
+%  instead of the normal \cs{abovedisplayskip}.
+%
+%  Note it will not work with the \env{equation} or \env{multline} environments.
+%  
+%  Here is an example of the effect
+% \begin{verbatim}
+%  \noindent\rule\textwidth{1pt}
+%  \begin{align*}  A &= B \end{align*}
+%  \noindent\rule\textwidth{1pt}
+%  \begin{align*}  
+%  \SwapAboveDisplaySkip
+%  A &= B 
+%  \end{align*}
+% \end{verbatim}
+%  \noindent\rule\textwidth{1pt}
+%  \begin{align*}  A &= B \end{align*}
+%  \noindent\rule\textwidth{1pt}
+%  \begin{align*}  
+%  \SwapAboveDisplaySkip
+%  A &= B 
+%  \end{align*}
+%  
 %
 %  \subsection{Controlling tags}
 %
@@ -732,6 +784,13 @@ and the derived files
 %    \usetagform{default}
 %  \end{verbatim}
 %
+%  \changes{v1.12}{2012/05/09}{Added caveat}
+%  \noindent\textbf{Caveat regarding \pkg{ntheorem}}: If you like to
+%  change the appearence of the tags \emph{and} you are also using the
+%  \pkg{ntheorem} package, then please postpone the change of
+%  appearance until \emph{after} loading \pkg{ntheorem}. (In order to
+%  do its thing \pkg{ntheorem} has to mess with the tags\dots)
+%
 %  \subsubsection{Showing only referenced tags}
 %
 %  \begin{codesyntax}
@@ -825,21 +884,23 @@ and the derived files
 %  Note that this feature only works if you use \cs{eqref} or
 %  \cs{refeq} to reference your equations.
 %
-%  When using \key{showonlyrefs} it might be usefull to be able to
-%  actually add a few equation numbers without directly refering to
+%  When using \key{showonlyrefs} it might be useful to be able to
+%  actually add a few equation numbers without directly referring to
 %  them.
 %  \begin{codesyntax}
 %    \SpecialUsageIndex{\noeqref}\cs{noeqref}\marg{label,label,\dots}
 %  \end{codesyntax}
 %  \FeatureRequest{Rasmus Villemoes}{2008/03/26}
-%  The syntax is somewhat similar to \cs{nocite}.
+%  The syntax is somewhat similar to \cs{nocite}. If a label in the
+%  list is undefined we will throw a warning in the same manner as
+%  \cs{ref}. 
 %
 %  \medskip\noindent\textbf{BUG 1:} Unfortunately the use of the
 %  \key{showonlyref} introduce a bug within amsmath's typesetting
 %  of formula versus equation number. This bug manifest itself by
 %  allowing formulas to be typeset close to or over the equation
 %  number.  Currently no general fix is known, other than making sure
-%  that ones formulas are not long enough to touch the equation
+%  that one's formulas are not long enough to touch the equation
 %  number.
 %
 %  To make a long story stort, amsmath typesets its math environments
@@ -848,15 +909,15 @@ and the derived files
 %  number is recorded such that the formula or the equation number can
 %  be moved (if necessary) in the typesetting part. When
 %  \key{showonlyref} is enabled, the width of the equation number
-%  depend on whether or not this number is refered~to. To determine
+%  depend on whether or not this number is referred~to. To determine
 %  this, we need to know the current label. But the current label is
 %  \emph{not} known in the measuring phase. Thus the measured width is
-%  always zero (because no label equals not refered to) and therefore
+%  always zero (because no label equals not referred to) and therefore
 %  the typesetting phase does not take the equation number into
 %  account.
 %
 % \medskip\noindent\textbf{BUG 2:} Currently there is a bug between
-% \key{showonlyrefs} and the \pkg{ntheorem} package, then the
+% \key{showonlyrefs} and the \pkg{ntheorem} package, when the
 % \pkg{ntheorem} option \key{thmmarks} is active. The shown equation
 % numbers may come out wrong (seems to be multiplied by 2). The
 % easiest fix is to add the following line
@@ -903,7 +964,7 @@ and the derived files
 %  extensible arrows are the only two of their kind defined by
 %  \pkg{amsmath}, but luckily \pkg{mathtools} helps with that. The
 %  extensible arrow-like symbols in \pkg{mathtools} follow the same
-%  naming scheme as the ones in \pkg{amsmath} so to get an extensible
+%  naming scheme as the one's in \pkg{amsmath} so to get an extensible
 %  \cs{Leftarrow} you simply do a
 %  \begin{verbatim}
 %    \[
@@ -991,7 +1052,7 @@ and the derived files
 %    \mathop{\thinboxed[blue]{\sum}}_{n}
 %    \mathop{\thinboxed[blue]{\LaTeXunderbrace{\thinboxed[green]{foof}}}}_{zzz}
 %  \]
-%  \normalsize Now there's to little space between the brace and the
+%  \normalsize Now there's too little space between the brace and the
 %  $zzz$ and also too little space between the brace and the $foof$.
 %  If you use Computer Modern you'll actually see that the $f$
 %  overlaps with the brace! Let's try in \cs{footnotesize}:
@@ -1122,8 +1183,8 @@ and the derived files
 % the default is \cs{,}.
 %
 % As an extra trick the fences will behave as open and closing fences
-% inconstract to their auto-scaling nature.\footnote{\cs{left} and
-%   \cs{right} does \emph{not} produce open an closing fences, thus
+% in constract to their auto-scaling nature.\footnote{\cs{left} and
+%   \cs{right} do \emph{not} produce open and closing fences, thus
 %   the space before or after may be too large. Inside this
 %   construction they behave.}
 % 
@@ -1291,6 +1352,21 @@ and the derived files
 %  The environments \env{rcases}, \env{rcases*}, \env{drcases} and
 %  \env{drcases*} are equivalent to \env{cases} and \env{dcases}, but
 %  here the brace is placed on the right instead of on the left.
+% \begin{verbatim}
+% \[
+% \begin{rcases*}
+%   x^2 & for $x>0$\\ 
+%   x^3 & else
+% \end{rcases*} \quad \Rightarrow \cdots
+% \]
+% \end{verbatim}
+% \[
+% \begin{rcases*}
+%   x^2 & for $x>0$\\ 
+%   x^3 & else
+% \end{rcases*} \quad \Rightarrow\cdots
+% \]
+%
 %
 %  \subsubsection{Emulating indented lines in alignments}
 %  \begin{codesyntax}
@@ -1298,7 +1374,7 @@ and the derived files
 %  \end{codesyntax}
 %  \ProvidedBy{Lars Madsen}{2008/06/05}
 %  In \cite{Swanson}, Ellen Swanson recommends that when ever one has
-%  a long displayed formula, spannig several lines, and it is
+%  a long displayed formula, spanning several lines, and it is
 %  unfeasible to align against a relation within the first line, then
 %  all lines in the display should be aligned at the left most edge of
 %  the first line, and all subsequent lines should be indented by 2em
@@ -1341,13 +1417,20 @@ and the derived files
 %  
 %  The \texttt{amsmath} package provie the \cs{boxed} macro to box
 %  material in math mode. But this of course will not work if the box
-%  should cross an alignment point. We provide a macro that can.
+%  should cross an alignment point. We provide a macro that
+%  can.\footnote{Note that internally \cs{Aboxed} does use \cs{boxed}.}
 %    \hskip1sp
 %   \marginpar{%
 %    \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
 %      \strut Evolved from a request by\\Merciadri Luca\\
 %       2010/06/28\\on comp.text.tex%
-%    }
+%    }\strut
+%  }%
+%   \marginpar{\strut\\%
+%    \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
+%      \strut Reimplemented by\\Florent Chervet (GL) \\
+%       2011/06/11\\on comp.text.tex%
+%    }\strut
 %  }%
 %  \begin{codesyntax}
 %    \SpecialEnvIndex{\Aboxed}\cs{Aboxed}\marg{left hand side 
@@ -1365,10 +1448,28 @@ and the derived files
 %   \Aboxed{ f(x) & = \int h(x)\, dx} \\
 %                 & = g(x)
 % \end{align*}
-%  
+% One can have multiple boxes on each line, and the
+% >>\texttt{\textnormal{\&}}\quad right hand side<< can even be
+% missing. Here is an example of how the padding in the box can be changed
+% \begin{verbatim}
+% \begin{align*}
+%   \setlength\fboxsep{1em}
+%   \Aboxed{ f(x) &= 0 } & \Aboxed{ g(x) &= b} \\
+%   \Aboxed{ h(x) }      & \Aboxed{ i(x) }   
+% \end{align*}
+% \end{verbatim}
+% \begin{align*}
+%   \setlength\fboxsep{1em}
+%   \Aboxed{ f(x) &= 0 } & \Aboxed{ g(x) &= b} \\
+%   \Aboxed{ h(x) }      & \Aboxed{ i(x) }   
+% \end{align*}
+% Note how the \cs{fboxsep} change only affect the box coming
+% immediately after it.  
 %
 %  \subsubsection{Adding arrows between lines in an alignment}
 %
+%  This first macro is a bit misleading, it is only intended to be
+%  used in combination with the \env{alignat(*)} environment.
 %  \begin{codesyntax}
 %    \SpecialEnvIndex{\ArrowBetweenLines}\cs{ArrowBetweenLines}\oarg{symbol}\\
 %    \SpecialEnvIndex{\ArrowBetweenLines*}\cs{ArrowBetweenLines*}\oarg{symbol}
@@ -1381,20 +1482,21 @@ and the derived files
 %    }
 %  }%
 %  To add, say $\Updownarrow$ between two lines in an alignment use
-%  \cs{ArrowBetweenLines} and the \env{alignat} environment:
+%  \cs{ArrowBetweenLines} and the \env{alignat} environment (note the
+%  extra pair of  \texttt{\&}'s in front):
 %  \begin{verbatim}
-%  \begin{alignat*}{2}
+%  \begin{alignat}{2}
 %    && \framebox[1.5cm]{} &= \framebox[3cm]{}\\
 %    \ArrowBetweenLines % \Updownarrow is the default
 %    && \framebox[1.5cm]{} &= \framebox[2cm]{}
-%  \end{alignat*}
+%  \end{alignat}
 %  \end{verbatim}
 %  resulting in
-%  \begin{alignat*}{2}
+%  \begin{alignat}{2}
 %    && \framebox[1.5cm]{} &= \framebox[3cm]{}\\
 %    \ArrowBetweenLines 
 %    && \framebox[1.5cm]{} &= \framebox[2cm]{}
-%  \end{alignat*}
+%  \end{alignat}
 %  Note the use of \verb+&&+ starting each \emph{regular} line of
 %  math. For adding the arrow on the right, use
 %  \cs{ArrowBetweenLines*}\oarg{symbol}, and end each line of math
@@ -1457,7 +1559,7 @@ and the derived files
 %     & = d
 % \end{align*}
 % Thus \verb?\vdotswithin{=}? create a box corersponding to
-% \verb?{}={}? and typeset a $\vdots$ centered inside it. When doing
+% \verb?{}={}? and typeset a >>$\vdots$<< centered inside it. When doing
 % this as a normal line in an alignment leaves us with excessive space
 % which \verb?\shortvdotswithin{=}? takes care with for us.
 %
@@ -1496,7 +1598,7 @@ and the derived files
 % indicated. Their original values are \verb?2.15\origjot? and
 % \verb?\origjot? respectively (\verb?\origjot? is usually 3pt). 
 %
-%  \subsection{Short intertext}
+%  \subsection{Intertext and short intertext}
 %
 %
 %  \begin{codesyntax}
@@ -1504,7 +1606,7 @@ and the derived files
 %  \end{codesyntax}
 %  \cttPosting{Gabriel Zachmann and Donald Arseneau}{2000/05/12--13}
 %  \pkg{amsmath} provides the command \cs{intertext} for interrupting
-%  a multi line display while still maintaining the alignment points.
+%  a multiline display while still maintaining the alignment points.
 %  However the spacing often seems quite excessive as seen below.
 %  \begin{verbatim}
 %    \begin{align}
@@ -1530,9 +1632,57 @@ and the derived files
 %    c&=d
 %  \end{align}
 %
+%  \noindent
+%  It turns out that both \cs{shortintertext} and the original
+%  \cs{intertext} from \pkg{amsmath} has a slight problem. If we use
+%  the \env{spreadlines} (see section~\ref{sec:spread}) to open up
+%  the equations in a multiline calculation, then this opening up
+%  value also applies to the spacing above and below the original
+%  \cs{shortintertext} and \cs{intertext}.  \tsxPosting{Tobias Weh
+%    \\(referring to a suggestion by Chung-chieh Shan)}{2011/05/29}
+% It can be illustrated using the following example, an interested
+% reader, can apply it with and with out the original \cs{intertext}
+% and \cs{shortintertext}.
+% \begin{verbatim}
+% % the original \intertext and \shortintertext
+% \mathtoolsset{original-intertext,original-shortintertext}
+% \newcommand\myline{\par\noindent\rule{\textwidth}{1mm}} 
+% \myline
+% \begin{spreadlines}{1em}
+%   \begin{align*}
+%     AA\\  BB\\  \intertext{\myline}
+%     AA\\  BB\\  \shortintertext{\myline}
+%     AA\\  BB
+%   \end{align*}
+% \end{spreadlines}
+% \myline
+% \end{verbatim}
 %
+%  We now fix this internaly for both \cs{intertext} and
+%  \cs{shortintertext}, plus we add the posibility to fine tune
+%  spacing around these constructions. The original versions can be
+%  brought back using the \texttt{original-x} keys below.
+%  \begin{codesyntax}
+%    \SpecialUsageIndex{\intertext}\cs{intertext}\marg{text}\\
+%    \SpecialUsageIndex{\shortintertext}\cs{shortintertext}\marg{text}\\
+%    \SpecialKeyIndex{original-intertext}$\key{original-intertext}=\texttt{true}\vert\texttt{false}$ \quad(default: \texttt{false})\\
+%    \SpecialKeyIndex{original-shortintertext}$\key{original-shortintertext}=\texttt{true}\vert\texttt{false}$ 
+%    \quad(default: \texttt{false})\\ 
+%    \SpecialKeyIndex{above-intertext-dim}$\key{above-intertext-dim}=\meta{dimen}$ \quad(default: 0pt)\\
+%    \SpecialKeyIndex{below-intertext-dim}$\key{below-intertext-dim}=\meta{dimen}$ \quad(default: 0pt)\\
+%    \SpecialKeyIndex{above-shortintertext-dim}$\key{above-shortintertext-dim}=\meta{dimen}$ \quad(default: 3pt)\\
+%    \SpecialKeyIndex{below-shortintertext-dim}$\key{below-shortintertext-dim}=\meta{dimen}$ \quad(default: 3pt)
+%  \end{codesyntax}
+%  The updated \cs{shortintertext} will look like the original version
+%  unless for areas with an enlarged \cs{jot} value (see for example
+%  the \env{spreadlines}, section~\ref{sec:spread}). Whereas \cs{intertext}
+%  will have a slightly smaller value above and below (corresponding
+%  to about 3pt less space above and below), the spacing around
+%  \cs{intertext} should now match the normal spacing going into and
+%  out of an \env{align}.
 %
-%
+% \textbf{Tip:} \cs{intertext} and \cs{shortintertext} also works
+% within \env{gather}.
 %
 %  \subsection{Paired delimiters}
 %
@@ -1630,22 +1780,22 @@ and the derived files
 % More interestingly we can refer to the size inside the
 % \meta{code}. Here we do a weird three argument `braket'
 % \begin{verbatim}
-% \DeclarePairedDelimiterX\brakket[3]{\langle}{\rangle}%
+% \DeclarePairedDelimiterX\braket[3]{\langle}{\rangle}%
 % {#1\,\delimsize\vert\,#2\,\delimsize\vert\,#3}
 % \end{verbatim}
 % Then we can get
 % \DeclarePairedDelimiterX\innerp[2]{\langle}{\rangle}{#1,#2}
-% \DeclarePairedDelimiterX\brakket[3]{\langle}{\rangle}%
+% \DeclarePairedDelimiterX\braket[3]{\langle}{\rangle}%
 % {#1\,\delimsize\vert\,#2\,\delimsize\vert\,#3}
 % \begin{verbatim}
 % \[
 % \innerp*{A}{ \frac{1}{2} } \quad
-% \brakket[\Big]{B}{\sum_{k} f_k}{C}
+% \braket[\Big]{B}{\sum_{k} f_k}{C}
 % \]
 % \end{verbatim}
 % \[
 % \innerp*{A}{ \frac{1}{2} } \quad
-% \brakket[\Big]{B}{\sum_{k}}{C}
+% \braket[\Big]{B}{\sum_{k}}{C}
 % \]
 % \iffalse
 % \bigskip
@@ -1669,6 +1819,38 @@ and the derived files
 % is a feature of the \cs{left}\dots\cs{right} construction).
 % \fi
 %
+%
+%  \subsubsection{Expert use}
+%
+%  Within the starred version of \cs{DeclarePairedDelimiter} and
+%  \cs{DeclarePairedDelimiterX} we make a few changes such that the
+%  auto scaled \cs{left} and \cs{right} fences behave as opening and
+%  closing fences, i.e.\ $\sin(x)$ vs. $\sin\left(x\right)$ (the later
+%  made via \verb|$\sin\left(x\right)$|), notice the gab between
+%  '$\sin$' and '('.  In some special cases it may be useful to be
+%  able to tinker with the behavior.
+%  \begin{codesyntax}
+%    \SpecialUsageIndex{\reDeclarePairedDelimiterInnerWrapper}\cs{reDeclarePairedDelimiterInnerWrapper}\marg{macro name}\marg{\textnormal{\texttt{star}} or \textnormal{\texttt{nostar}}}\marg{code}
+%  \end{codesyntax}
+%  Internally several macros are created, including two call backs
+%  that take care of the formatting. There is one internal macro for
+%  the starred version, labeled \texttt{star}, the other one is
+%  labeled \texttt{nostar}. Within \meta{code}, \texttt{\#1} will be
+%  replaced by the scaled left fence, \texttt{\#3} the corresponding
+%  scaled right fence, and \texttt{\#2} the stuff in between. For
+%  example, here is how one might turn the content into \cs{mathinner}:
+% \begin{verbatim}
+% \DeclarePairedDelimiter\abs\lvert\rvert
+% \reDeclarePairedDelimiterInnerWrapper\abs{star}{#1#2#3}
+% \reDeclarePairedDelimiterInnerWrapper\abs{nostar}{\mathinner{#1#2#3}}
+% \end{verbatim}
+%  The default values for the call backs corresponds to
+% \begin{verbatim}
+% star:   \mathopen{}\mathclose\bgroup #1#2\aftergroup\egroup #3
+% nostar: \mathopen{#1}#2\mathclose{#3}
+% \end{verbatim}
+%
+%
 %  \subsection{Special symbols}
 %
 %  This part of the manual is about special symbols. So far only one
@@ -1728,7 +1910,7 @@ and the derived files
 %  \medskip
 %  \noindent\textbf{Warning:} \texttt{centercolon} \emph{does not}
 %  work with languages that make use of an active colon, most notably
-%  French. Sadly the \texttt{babel} package does not distinguish
+%  \emph{French}. Sadly the \texttt{babel} package does not distinguish
 %  between text and math when it comes to active characters. Nor does
 %  it provide any hooks to deal with math. So currently no general
 %  solution exists for this problem.
@@ -1781,7 +1963,8 @@ and the derived files
 %    \SpecialUsageIndex{\bigtimes}\cs{bigtimes}
 %  \end{codesyntax}
 %
-%  \emph{Note:} that these symbols are constructed via
+%  \noindent
+%  \textbf{Note:} that these symbols are constructed via
 %  features from the \pkg{graphicx} package, and thus may not display
 %  correctly in most DVI previewers. Also note that \cs{nuparrow} and
 %  \cs{ndownarrow} are constructed via \cs{nrightarrow} and
@@ -1914,7 +2097,8 @@ and the derived files
 %    \myisotope{A}{Z}{X}\to \myisotope{A-4}{Z-2}{Y}+
 %    \myisotope{4}{2}{\alpha}
 %  \]
-%
+% (Though a package like \pkg{mhchem} might be more suitable for this
+% type of material.)
 %
 %  \subsection{Declaring math sizes}
 %
@@ -1935,7 +2119,7 @@ and the derived files
 %  been fixed in \LaTeX, this fix will be removed from
 %  \pkg{mathtools}.
 %
-%  \subsection{Spreading equations}
+%  \subsection{Spreading equations}\label{sec:spread}
 %
 %  \begin{codesyntax}
 %    \SpecialEnvIndex{spreadlines}
@@ -1943,7 +2127,7 @@ and the derived files
 %    \cs{end}\arg{spreadlines}
 %  \end{codesyntax}
 %  \cttPosting{Michael J.~Downes}{2002/10/17}
-%  The spacing between lines in a multi line math environment such as
+%  The spacing between lines in a multiline math environment such as
 %  \env{gather} is governed by the dimension \cs{jot}. The
 %  \env{spreadlines} environment takes one argument denoting the
 %  value of \cs{jot} inside the environment:
@@ -2049,7 +2233,7 @@ and the derived files
 %    \SpecialUsageIndex{\splitdfrac}\cs{splitdfrac}\marg{numer}\marg{denom}
 %  \end{codesyntax}
 %  \cttPosting{Michael J.~Downes}{2001/12/06}
-%  These commands provide split fractions e.g., multi line fractions:
+%  These commands provide split fractions e.g., multiline fractions:
 %  \begin{verbatim}
 %    \[
 %      a=\frac{
@@ -2213,7 +2397,7 @@ and the derived files
 %    \begin{macrocode}
 %<*package>
 \ProvidesPackage{mathtools}%
-  [2011/04/06 v1.11 mathematical typesetting tools]
+  [2012/04/24 v1.12 mathematical typesetting tools]
 %    \end{macrocode}
 % \changes{v1.10}{2011/02/12}{Might as well make sure that we need the
 % latest version of \texttt{mhsetup}}
@@ -2410,7 +2594,9 @@ and the derived files
 %    \end{macrocode}
 % We test if the equation was labelled. We already know if it was
 % tagged manually. Have to watch out for \TeX\ inserting a blank line
-% so do not let the tag have width zero.
+% so do not let the tag have width zero. Rememeber
+% \cs{@safe@activestrue/false} in order to handle active chars in labels.
+% \changes{v1.12}{2012/04/24}{Added \cs{@safe@activestrue/false}}
 %    \begin{macrocode}
   \if_meaning:NN \df@label\@empty
     \MH_if_boolean:nTF {manual_tag}% this was \MH_if_boolean:nT before
@@ -2422,14 +2608,27 @@ and the derived files
     \MH_if_boolean:nTF {manual_tag}
       { \MH_if_boolean:nTF {show_manual_tags}
           { \MT_prev_tagform:n {#1} }
-          { \@ifundefined{MT_r_\df@label}
-              {  }
+          { \@safe@activestrue
+            \@ifundefined{MT_r_\df@label}
+%    \end{macrocode}
+% Next we need to remember to deactivate the manual tags switch. This
+% is usually done using \verb|\MT_extended_maketag:n|, but this is not
+% the case if the show manual tags is false and the manual tag is not
+% referred to. 
+% \changes{v1.12}{2011/06/08}{Added the falsification of manual tag
+% when show manual tags is off and maual tag is not referred to}
+%    \begin{macrocode}
+              { \global\MH_set_boolean_F:n {manual_tag} }
               { \MT_prev_tagform:n {#1} }
+              \@safe@activesfalse
           }
       }
-      { \@ifundefined{MT_r_\df@label}
+      { 
+        \@safe@activestrue
+        \@ifundefined{MT_r_\df@label}
           { }
           { \refstepcounter{equation}\MT_prev_tagform:n {#1} }
+        \@safe@activesfalse
       }
   \fi:
   \global\MH_set_boolean_T:n {raw_maketag}
@@ -2438,6 +2637,7 @@ and the derived files
 %  \end{macro}
 %  \begin{macro}{\MT_extended_maketag:n}
 %  The extended version of \cs{maketag@@@}.
+% \changes{v1.12}{2012/04/24}{Added \cs{@safe@activestrue/false}}
 %    \begin{macrocode}
 \def\MT_extended_maketag:n #1{
   \ifx\df@label\@empty
@@ -2447,16 +2647,18 @@ and the derived files
       {
         \MH_if_boolean:nTF {show_manual_tags}
           { \MT_maketag:n {#1} }
-          { \@ifundefined{MT_r_\df@label}
+          { \@safe@activestrue
+            \@ifundefined{MT_r_\df@label}
               { }
               { \MT_maketag:n {#1}     }
+            \@safe@activesfalse
           }
       }
       { \MT_maketag:n {#1} }
   \fi:
 %    \end{macrocode}
 %  As this function is always called we let it set the marker for a manual
-%  tag false when exiting.
+%  tag false when exiting (well actually not true, see above).
 %    \begin{macrocode}
   \global\MH_set_boolean_F:n {manual_tag}
 }
@@ -2593,19 +2795,45 @@ and the derived files
 %
 %  \begin{macro}{\noeqref}
 %   \changes{v1.04}{2008/03/26}{Added \cs{noeqref} (daleif)}
-%   Macro for adding numbers to non-refered equations. Syntax similar
+%   \changes{v1.12}{2012/04/20}{Labels containing active chars (babel)
+%   are now allowed}
+%   \changes{v1.12}{2012/04/24}{\cs{noeqref} will now make a reference
+%   warning if users use undefined labels in \cs{noeqref}, requested
+%   by Tue Christensen}
+%   Macro for adding numbers to non-referred equations. Syntax similar
 %   to \cs{nocite}.
 %    \begin{macrocode}
 \MHInternalSyntaxOff
 \newcommand\noeqref[1]{\@bsphack
   \@for\@tempa:=#1\do{%
+    \@safe@activestrue%
     \edef\@tempa{\expandafter\@firstofone\@tempa}%
+    \@ifundefined{r@\@tempa}{%
+      \protect\G@refundefinedtrue%
+      \@latex@warning{Reference `\@tempa' on page \thepage \space
+        undefined (\string\noeqref)}%
+    }{}%
     \if@filesw\protected@write\@auxout{}%
-    {\string\MT@newlabel{\@tempa}}\fi}
+    {\string\MT@newlabel{\@tempa}}\fi%
+  \@safe@activesfalse}
   \@esphack}
-\MHInternalSyntaxOn
+
 %    \end{macrocode}
 %  \end{macro}
+%    
+% \begin{macro}{\@safe@activestrue}
+% \begin{macro}{\@safe@activesfalse}
+%   These macros are provided by babel. We \emph{provide} them here,
+%   just to make sure they exist.
+%    \begin{macrocode}
+\providecommand\@safe@activestrue{}%
+\providecommand\@safe@activesfalse{}%
+
+\MHInternalSyntaxOn
+%    \end{macrocode}
+%   
+% \end{macro}
+% \end{macro}
 %
 %  \subsection{Extensible arrows etc.}
 %
@@ -3234,6 +3462,41 @@ and the derived files
 %
 %  \subsection{Paired delimiters}
 %
+%  \changes{v1.13}{2012/05/10}{Extended \cs{DeclarePairedDelimiter(X)}}
+%  \begin{macro}{\MT_delim_default_inner_wrappers:n}
+%  In some cases users may want to control the internals a bit more. We
+%  therefore create two call back macros each time the
+%  \cs{DeclarePaired...} macro is issued. The default value of these
+%  call backs are provided by |\MT_delim_default_inner_wrappers:n|
+%    \begin{macrocode}
+\newcommand\MT_delim_default_inner_wrappers:n [1]{
+   \@namedef{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}##1##2##3{
+      \mathopen{}\mathclose\bgroup ##1 ##2 \aftergroup\egroup ##3
+    }
+    \@namedef{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}##1##2##3{
+      \mathopen{##1}##2\mathclose{##3}
+    }
+  }
+
+%    \end{macrocode}
+% \begin{macro}{\reDeclarePairedDelimiterInnerWrapper}
+%   Macro enabling the user to alter an existing call back. Note that
+%   currently no checks are performed. First argument is the name of
+%   the macro we are altering (as defined via \cs{DeclarePaired...}),
+%   the second is \texttt{star} or \texttt{nostar}. In the last
+%   argument \texttt{\#1} and \texttt{\#3} respectively refer to the
+%   scaled fences and \texttt{\#3} refer to whatever come between.
+%    \begin{macrocode}
+\newcommand\reDeclarePairedDelimiterInnerWrapper[3]{
+  \@namedef{MT_delim_\MH_cs_to_str:N #1 _ #2 _wrapper:nnn}##1##2##3{
+    #3
+  }
+}
+
+%    \end{macrocode}
+%   
+% \end{macro}
+%  \end{macro}
 %  \begin{macro}{\DeclarePairedDelimiter}
 %  \changes{v1.06}{2008/08/01}{Made user command robust}
 %  This macro defines |#1| to be a control sequence that takes either
@@ -3247,9 +3510,13 @@ and the derived files
 %  \changes{1.08e}{2010/09/02}{`Fixed' \cs{left}\dots\cs{right} bad spacing}
 %  \changes{1.08e}{2010/09/14}{redid the \cs{left}\dots\cs{right} fix,
 %  see \cs{DeclarePairedDelimiterX} for details.}
+%  \changes{v1.13}{2012/05/10}{Using call back instead}
 %    \begin{macrocode}
+    \MT_delim_default_inner_wrappers:n{#1}
     \@namedef{MT_delim_\MH_cs_to_str:N #1 _star:}##1
-        {\mathopen{}\mathclose\bgroup\left#2 ##1 \aftergroup\egroup\right #3}%
+      %{\mathopen{}\mathclose\bgroup\left#2 ##1 \aftergroup\egroup\right #3}%
+      { \@nameuse{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}%
+           {\left#2}{##1}{\right#3} }%
 %    \end{macrocode}
 %  The command with optional argument. It should be \cs{bigg} or
 %  alike.
@@ -3262,9 +3529,15 @@ and the derived files
 %    \end{macrocode}
 %  With the default optional argument we wind up with \cs{relax},
 %  else we get \cs{biggr} and \cs{biggl} etc.
-%    \begin{macrocode}
-          \mathopen{\@nameuse {\MH_cs_to_str:N ##1 l} #2} ##2 
-          \mathclose{\@nameuse {\MH_cs_to_str:N ##1 r} #3}}
+%  \changes{v1.13}{2012/05/10}{Using call back instead}
+%    \begin{macrocode}
+          %\mathopen{\@nameuse {\MH_cs_to_str:N ##1 l} #2} ##2 
+          %\mathclose{\@nameuse {\MH_cs_to_str:N ##1 r} #3}}
+          \@nameuse{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}%
+             {\@nameuse {\MH_cs_to_str:N ##1 l} #2}
+             {##2}
+             {\@nameuse {\MH_cs_to_str:N ##1 r} #3}
+        }
 %    \end{macrocode}
 %  The user command comes here. Just check for the star and choose
 %  the right internal command.
@@ -3286,7 +3559,8 @@ and the derived files
 %  can specify the number of arguments the created macro has, and they
 %  can specify the code for the inner part of the macro. Other than
 %  that the code is fairly similar to \cs{DeclarePairedDelimiter}
-% \changes{v1.08e}{2010/09/02}{Provided better implementation of \cs{DeclarePairedDelimiterX}}
+%  \changes{v1.08e}{2010/09/02}{Provided better implementation of 
+%  \cs{DeclarePairedDelimiterX}}
 %    \begin{macrocode}
 \def\MHempty{}
 \def\DeclarePairedDelimiterX#1[#2]#3#4#5{%
@@ -3304,6 +3578,11 @@ and the derived files
       \fi
     \fi
 %    \end{macrocode}
+%  \changes{v1.13}{2012/05/10}{Using call back instead}
+%  Initiate the default call backs.
+%    \begin{macrocode}
+    \MT_delim_default_inner_wrappers:n{#1}
+%    \end{macrocode}
 % We make sure to store the delimiter size in the local variable
 % \cs{delimsize}. Then users can refer to the size in the fifth
 % argument. In the starred version it will refer to \cs{middle} and in
@@ -3315,16 +3594,20 @@ and the derived files
         [#2]
         {
           \begingroup
-          \def\delimsize{\middle}
+            \def\delimsize{\middle}
 %    \end{macrocode}
 % This is slightly controversial, \cs{left}\dots\cs{right} are known
 % to produce an inner atom, thus may cause different spacing than
-% normal delimiters. We `fix' this by introducing \cs{mathopen} and \cs{mathclose}:
+% normal delimiters. We `fix' this by introducing \cs{mathopen} and
+% \cs{mathclose}. This change is now factored out into call backs. 
 % \changes{v1.08e}{2010/09/14}{redid the left/right fix, inspired by
 % ctt thread named `spacing after \cs{right}) and before \cs{left})'
 % started 2010-08-12.}
+% \changes{v1.13}{2012/05/10}{Using call back instead}
 %    \begin{macrocode}
-            \mathopen{}\mathclose\bgroup\left#3 #5 \aftergroup\egroup\right#4
+            %\mathopen{}\mathclose\bgroup\left#3 #5 \aftergroup\egroup\right#4
+            \@nameuse{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}
+              {\left#3}{#5}{\right#4}
           \endgroup
         }
 %    \end{macrocode}
@@ -3353,19 +3636,30 @@ and the derived files
 %    \end{macrocode}
 % Next we provide the inner workhorse. We need a bit of expansion
 % magic to get \cs{delimsize} to work.
+% \changes{v1.13}{2012/05/10}{Using call back instead}
 %    \begin{macrocode}
     \@xp\@xp\@xp
       \newcommand
         \@xp\csname MT_delim_\MH_cs_to_str:N #1 _nostar_inner:\endcsname
         [#2]
         {
-          \mathopen{%
+          %\mathopen{%
+          %  \let\MHempty\@gobble
+          %  \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3} 
+          %#5
+          %\mathclose{%
+          %  \let\MHempty\@gobble
+          %  \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4}
+          \@nameuse{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}
+          {
             \let\MHempty\@gobble
-            \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3} 
-          #5
-          \mathclose{%
+            \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3
+          }
+          {#5}
+          {
             \let\MHempty\@gobble
-            \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4}
+            \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4
+          }
           \endgroup
         }
     \DeclareRobustCommand{#1}{
@@ -3909,6 +4203,23 @@ and the derived files
 }
 %    \end{macrocode}
 %  \end{macro}
+% 
+%  \subsection{Swapping above display skip}
+%
+% \begin{macro}{\SwapAboveDisplaySkip}
+%   This macro is intended to be used at the start of \AmS\
+%   environments, in order to force it to use
+%   \cs{abovedisplayshortskip} instead of \cs{abovedisplayskip} above
+%   the displayed math. Because of the use of \cs{noalign} it will not
+%   work inside \env{equation} or \env{multline}.
+%    \begin{macrocode}
+\newcommand\SwapAboveDisplaySkip{%
+  \noalign{\vskip-\abovedisplayskip\vskip\abovedisplayshortskip}
+}
+
+%    \end{macrocode}
+%   
+% \end{macro}
 %
 %  \subsection{An aid to alignment}
 %
@@ -3916,48 +4227,39 @@ and the derived files
 %   \changes{v1.05}{2008/06/05}{Added \cs{MoveEqLeft} (daleif)}
 %   \changes{v1.05b}{2008/06/18}{We don't need \cs{setlength} here
 %     (daleif), after discussion about \cs{global} and \cs{setlength}
-%     on ctt} This is a very simple macro, we `move' a line in an
+%     on ctt} 
+%   \changes{v1.12}{2011/06/12}{We don't even need lengths. GL
+%   suggested on ctt to just apply them directly.}
+%   This is a very simple macro, we `move' a line in an
 %   alignment backwards in order to simulate that all subsequent lines
 %   have been indented. Note that simply using \verb+\kern-2m+ after
 %   the \verb+&+ is not enough, then the alignemnt environment never
 %   detects that there is anything (though simulated) in the cell
 %   before the \verb+&+.
 %    \begin{macrocode}
-\newcommand\MoveEqLeft[1][2]{%
-  \global\@tempdima=#1em%
-  \kern\@tempdima%
-  & 
-  \kern-\@tempdima}
+\newcommand\MoveEqLeft[1][2]{\kern #1em  &   \kern -#1em}
 %    \end{macrocode}
 % \end{macro}
 %
 % \begin{macro}{\Aboxed}
 % \changes{v1.08}{2010/06/29}{Added \cs{Aboxed}}
 % The idea from \cs{MoveEqLeft} can be used for other things. Here we
-% create a macro that will allow a user to box a single line in an
+% create a macro that will allow a user to box an equation inside an
 % alignment.
+% \changes{v1.12}{2011/08/17}{\cs{Aboxed} reimplemented, cudos to GL}
 %    \begin{macrocode}
-\newcommand\Aboxed[1]{\@Aboxed#1\ENDDNE}
+\newcommand\Aboxed[1]{\let\bgroup{\romannumeral-`}\@Aboxed#1&&\ENDDNE}
 %    \end{macrocode}
-% Idea: get the left and right part
-% typeset them in a \cs{boxed} AFTER an \& and pull it backwards
-% but in order to get the horizontal placement to work. As with
-% \cs{MoveEqLeft}  we need to set some appropriate space to the left
-% of the \& .
-% \changes{v1.11}{2011/04/06}{Removed unnessary \{\} pair}
+% The macro has been reimplemented courtesy of Florent Chervet out of
+% a posting on ctt, \url{https://groups.google.com/group/comp.text.tex/browse_thread/thread/5d66395f2a1b5134/93fd9661484bd8d8?#93fd9661484bd8d8}
 %    \begin{macrocode}
-\def\@Aboxed#1&#2\ENDDNE{%
-  \settowidth\@tempdima{$\displaystyle#1$}%
-  \addtolength\@tempdima{\fboxsep}%
-  \addtolength\@tempdima{\fboxrule}%
-  \global\@tempdima=\@tempdima
-  \kern\@tempdima
-  &
-  \kern-\@tempdima
-  \boxed{#1#2}
+\def\@Aboxed#1&#2&#3\ENDDNE{%
+  \ifnum0=`{}\fi \setbox \z@
+    \hbox{$\displaystyle#1{}\m@th$\kern\fboxsep \kern\fboxrule }%
+    \edef\@tempa {\kern  \wd\z@ &\kern -\the\wd\z@ \fboxsep
+        \the\fboxsep \fboxrule \the\fboxrule }\@tempa \boxed {#1#2}%
 } 
 %    \end{macrocode}
-% 
 % \end{macro}
 %
 % \begin{macro}{\ArrowBetweenLines}
@@ -4202,16 +4504,126 @@ and the derived files
 %
 %  \section{Macros by other people}
 %
-%  \subsection{Short intertext}
+%  \subsection{Intertext and short intertext}
+%
+%  It turns out that \cs{intertext} use a bit too much
+%  space. Especially noticable if combined with the \env{spreadlines}
+%  environment, the extra space is also applied above and below
+%  \cs{intertext}, which ends up looking unproffesional.  Chung-chieh
+%  Shan
+%  (\url{http://conway.rutgers.edu/~ccshan/wiki/blog/posts/Beyond_amsmath/})
+%  via Tobias Weh suggested a fix. We apply it here, but also keep the
+%  original \cs{intertext} in case a user would rather want it.
+% \begin{macro}{\MT_orig_intertext:}
+% \begin{macro}{\MT_intertext:}
+% \begin{macro}{\l_MT_above_intertext_dim}
+% \begin{macro}{\l_MT_below_intertext_dim}
+%  First store the originam Ams version.
+%    \begin{macrocode}
+\MH_let:NwN \MT_orig_intertext: \intertext@
+%    \end{macrocode}
+% And then for some reconfiguration. First a few lengths
+%    \begin{macrocode}
+\newdimen\l_MT_above_intertext_dim
+\newdimen\l_MT_below_intertext_dim
+\define@key{\MT_options_name:}
+  {aboveintertextdim}{\setlength\l_MT_above_interetext_dim{#1}}
+\define@key{\MT_options_name:}
+  {belowintertextdim}{\setlength\l_MT_below_intertext_dim{#1}}
+%    \end{macrocode}
+% Their default values are zero. Now for our extended version of
+% CCShan's solution.  
+%    \begin{macrocode}
+\def\MT_intertext: {%
+  \def\intertext##1{%
+    \ifvmode\else\\\@empty\fi
+    \noalign{%
+      \penalty\postdisplaypenalty\vskip\belowdisplayskip
+      \vskip-\lineskiplimit      % CCS
+      \vskip\normallineskiplimit % CCS
+      \vskip\l_MT_above_intertext_dim
+       \vbox{\normalbaselines
+        \ifdim\linewidth=\columnwidth
+        \else \parshape\@ne \@totalleftmargin \linewidth
+        \fi
+        \noindent##1\par}%
+      \penalty\predisplaypenalty\vskip\abovedisplayskip%
+      \vskip-\lineskiplimit      % CCS
+      \vskip\normallineskiplimit % CCS
+      \vskip\l_MT_above_intertext_dim
+   }%
+}}
+%    \end{macrocode}
+% And provide a key to switch
+%    \begin{macrocode}
+\def\MT_orig_intertext_true:  { \MH_let:NwN \intertext@ \MT_orig_intertext: }
+\def\MT_orig_intertext_false: { \MH_let:NwN \intertext@ \MT_intertext: }
+\define@key{\MT_options_name:}{original-intertext}[true]{
+  \@nameuse{MT_orig_intertext_#1:}
+}
+%    \end{macrocode}
+% And use the new version as default.
+%    \begin{macrocode}
+\setkeys{\MT_options_name:}{
+  original-intertext=false
+}
+%    \end{macrocode}
+% 
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
 %
 %  Gabriel Zachmann, Donald Arseneau on comp.text.tex 2000/05/12-13
 %  \begin{macro}{\shortintertext}
-%  This is like \cs{intertext} but uses shorter skips betweeb the math.
+%  \begin{macro}{\MT_orig_shortintertext}
+%  \begin{macro}{\MT_shortintertext}
+%  \begin{macro}{\l_above_shortintertext_dim}
+%  \begin{macro}{\l_below_shortintertext_dim}
+%  This is like \cs{intertext} but uses shorter skips between the
+%  math. Again this turned out to have the same problem as
+%  \cs{intertext}, so we provide two versions.
+%    \begin{macrocode}
+\def\MT_orig_shortintertext:n #1{%
+  \ifvmode\else\\\@empty\fi
+  \noalign{%
+    \penalty\postdisplaypenalty\vskip\abovedisplayshortskip
+    \vbox{\normalbaselines
+      \if_dim:w \linewidth=\columnwidth
+      \else:
+        \parshape\@ne \@totalleftmargin \linewidth
+      \fi:
+      \noindent#1\par}%
+    \penalty\predisplaypenalty\vskip\abovedisplayshortskip%
+  }%
+}
+%    \end{macrocode}
+% Lengths like above
+%    \begin{macrocode}
+\newdimen\l_MT_above_shortintertext_dim
+\newdimen\l_MT_below_shortintertext_dim
+\define@key{\MT_options_name:}
+  {aboveshortintertextdim}{\setlength \l_MT_above_shortintertext_dim{#1}}
+\define@key{\MT_options_name:}
+  {belowshortintertextdim}{\setlength \l_MT_below_shortintertext_dim{#1}}
+%    \end{macrocode}
+% Looks best with the `old' values of the original \cs{jot}
+% setting. So we set them to 3pt each.
+%    \begin{macrocode}
+\setkeys{\MT_options_name:}{
+  aboveshortintertextdim=3pt,
+  belowshortintertextdim=3pt
+}
+%    \end{macrocode}
+%  Next, just add the same as we did for \cs{intertext}
 %    \begin{macrocode}
-\def\shortintertext#1{%
+\def\MT_shortintertext:n #1{%
   \ifvmode\else\\\@empty\fi
   \noalign{%
     \penalty\postdisplaypenalty\vskip\abovedisplayshortskip
+    \vskip-\lineskiplimit      
+    \vskip\normallineskiplimit 
+    \vskip\l_MT_above_shortintertext_dim
     \vbox{\normalbaselines
       \if_dim:w \linewidth=\columnwidth
       \else:
@@ -4219,9 +4631,30 @@ and the derived files
       \fi:
       \noindent#1\par}%
     \penalty\predisplaypenalty\vskip\abovedisplayshortskip%
+    \vskip-\lineskiplimit      
+    \vskip\normallineskiplimit 
+    \vskip\l_MT_below_shortintertext_dim
   }%
 }
 %    \end{macrocode}
+% Next we need to be able to switch.
+%    \begin{macrocode}
+\def\MT_orig_shortintertext_true:  { \MH_let:NwN \shortintertext \MT_orig_shortintertext:n }
+\def\MT_orig_shortintertext_false: { \MH_let:NwN \shortintertext \MT_shortintertext:n }
+\define@key{\MT_options_name:}{original-shortintertext}[true]{
+  \@nameuse{MT_orig_shortintertext_#1:}
+}
+%    \end{macrocode}
+% With the updated one as the default.
+%    \begin{macrocode}
+\setkeys{\MT_options_name:}{
+  original-shortintertext=false
+}
+%    \end{macrocode}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
+%  \end{macro}
 %  \end{macro}
 %
 %  \subsection{Fine-tuning mathematical layout}
@@ -4447,13 +4880,24 @@ and the derived files
 %  December~20th 2000 by Michael J.~Downes. The comments are his. I
 %  have added some formatting options to the arguments so that a user
 %  can emulate the \pkg{isotope} package.
+%
+% \changes{v.1.12}{2012/04/19}{Extended \cs{prescript} to change style
+% if used in say S context. Requestd by Oliver Buerschaper.}
+%  Update 2012: One drawback from MJD's original implementation, is
+%  that the math style is hardwired, such that if used in say
+%  \cs{scriptstyle} context, then the style/size of the prescript
+%  remain the same size. A slightly expensive fix, is to use the
+%  \cs{mathchoice} construction. First exdent MJD's code a little
+%  (keeping his comments)
+% \begin{macro}{\MT_prescript_inner:}
+% We make the style an extra forth argument
 %    \begin{macrocode}
-\DeclareRobustCommand{\prescript}[3]{
+\newcommand{\MT_prescript_inner:}[4]{
 %    \end{macrocode}
 %  Put the sup in box 0 and the sub in box 2.
 %    \begin{macrocode}
-  \@mathmeasure\z@\scriptstyle{\MT_prescript_sup:{#1}}
-  \@mathmeasure\tw@\scriptstyle{\MT_prescript_sub:{#2}}
+  \@mathmeasure\z@#4{\MT_prescript_sup:{#1}}
+  \@mathmeasure\tw@#4{\MT_prescript_sub:{#2}}
   \if_dim:w \wd\tw@>\wd\z@
     \setbox\z@\hbox to\wd\tw@{\hfil\unhbox\z@}
   \else:
@@ -4472,6 +4916,24 @@ and the derived files
   \MT_prescript_arg:{#3}
 }
 %    \end{macrocode}
+% \end{macro}
+% Next create \cs{prescript} using \cs{mathchoice} 
+%    \begin{macrocode}
+\DeclareRobustCommand{\prescript}[3]{
+  \mathchoice
+%    \end{macrocode}
+%  In D and T style, we use MJD's default:
+%    \begin{macrocode}
+    {\MT_prescript_inner:{#1}{#2}{#3}{\scriptstyle}}
+    {\MT_prescript_inner:{#1}{#2}{#3}{\scriptstyle}}
+%    \end{macrocode}
+%  In the others we step one style down. Of couse in SS style, using
+%  \cs{scriptscript} may seem wrong, but there is no lower style.
+%    \begin{macrocode}
+    {\MT_prescript_inner:{#1}{#2}{#3}{\scriptscriptstyle}}
+    {\MT_prescript_inner:{#1}{#2}{#3}{\scriptscriptstyle}}
+}
+%    \end{macrocode}
 %  \end{macro}
 %  Then the named arguments. Can you see I'm preparing for templates?
 %    \begin{macrocode}
diff --git a/Master/texmf-dist/source/latex/mh/mhsetup.dtx b/Master/texmf-dist/source/latex/mh/mhsetup.dtx
index d4b71b9a76d..d1fe0bcb154 100644
--- a/Master/texmf-dist/source/latex/mh/mhsetup.dtx
+++ b/Master/texmf-dist/source/latex/mh/mhsetup.dtx
@@ -1,6 +1,6 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2002-2007,2010 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2002-2007,2010 by Morten Hoegholm
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -12,7 +12,7 @@
 %
 % This work has the LPPL maintenance status "maintained".
 %
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
 % Lars Madsen, Will Robertson and Joseph Wright.
 %
 % This work consists of the main source file mhsetup.dtx
@@ -77,7 +77,7 @@
 
 This is a generated file.
 
-Copyright (C) 2002-2007,2010 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2007,2010 by Morten Hoegholm
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -89,7 +89,7 @@ LaTeX version 2005/12/01 or later.
 
 This work has the LPPL maintenance status "maintained".
 
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is 
 Lars Madsen, Will Robertson and Joseph Wright.
 
 This work consists of the main source file mhsetup.dtx