new latex package sageep 1.0 (14jan09)

git-svn-id: svn://tug.org/texlive/trunk@11885 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 612 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/sageep/Makefile b/Master/texmf-dist/source/latex/sageep/Makefile
new file mode 100644
index 00000000000..d2eb3621bc5
--- /dev/null
+++ b/Master/texmf-dist/source/latex/sageep/Makefile
@@ -0,0 +1,65 @@
+#
+# Makefile for sageep package
+#
+# This file is in public domain
+#
+# $Id: Makefile,v 1.4 2009-01-09 19:14:43 boris Exp $
+#
+
+PACKAGE=sageep
+
+SAMPLES = sample.tex
+
+
+PDF = $(PACKAGE).pdf ${SAMPLES:%.tex=%.pdf}
+
+all:  ${PDF} $(PACKAGE).bst
+
+
+%.pdf:  %.dtx   $(PACKAGE).cls
+	pdflatex $<
+	- bibtex $*
+	pdflatex $<
+	- makeindex -s gind.ist -o $*.ind $*.idx
+	- makeindex -s gglo.ist -o $*.gls $*.glo
+	pdflatex $<
+	while ( grep -q '^LaTeX Warning: Label(s) may have changed' $*.log) \
+	do pdflatex $<; done
+
+
+%.cls:   %.ins %.dtx  
+	pdflatex $<
+
+%.pdf:  %.tex   $(PACKAGE).cls $(PACKAGE).bst
+	pdflatex $<
+	- bibtex $*
+	pdflatex $<
+	pdflatex $<
+	while ( grep -q '^LaTeX Warning: Label(s) may have changed' $*.log) \
+	do pdflatex $<; done
+
+
+.PRECIOUS:  $(PACKAGE).cfg $(PACKAGE).cls
+
+
+clean:
+	$(RM)  $(PACKAGE).cls *.log *.aux \
+	*.glo *.idx *.toc *.tbc \
+	*.ilg *.ind *.out *.lof \
+	*.lot *.bbl *.blg *.gls *.sty *.ist \
+	*.dvi *.ps *.thm *.tgz *.zip
+
+distclean: clean
+	$(RM) $(PDF) 
+
+#
+# Archive for the distribution. Includes typeset documentation
+#
+archive:  all clean
+	tar -czvf $(PACKAGE).tgz  --exclude 'debug*' \
+	--exclude '*~' --exclude '*.tgz' --exclude '*.zip'  --exclude CVS .
+
+
+zip:  all clean
+	zip -r  $(PACKAGE).zip * \
+	-x 'debug*' -x '*~' -x '*.tgz' -x '*.zip' -x CVS -x 'CVS/*'
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/sageep/sageep.dtx b/Master/texmf-dist/source/latex/sageep/sageep.dtx
new file mode 100644
index 00000000000..df214840e4c
--- /dev/null
+++ b/Master/texmf-dist/source/latex/sageep/sageep.dtx
@@ -0,0 +1,515 @@
+% \iffalse
+% $Id: sageep.dtx,v 1.7 2009-01-14 21:43:46 boris Exp $
+%
+% Copyright 2008, Boris Veytsman
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.3 of this license or (at your option) any 
+% later version.
+% The latest version of the license is in
+%    http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of
+% LaTeX version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+%
+% The Current Maintainer of this work is Boris Veytsman,
+% <borisv@lk.net> 
+%
+% This work consists of the files sageep.dtx, sageep.bst  and the
+% derived file sageep.cls
+%
+% \fi 
+% \CheckSum{129}
+%
+%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~} 
+%
+%\iffalse
+% Taken from xkeyval.dtx
+%\fi
+%\makeatletter
+%\def\DescribeOption#1{\leavevmode\@bsphack
+%              \marginpar{\raggedleft\PrintDescribeOption{#1}}%
+%              \SpecialOptionIndex{#1}\@esphack\ignorespaces}
+%\def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ }
+%\def\SpecialOptionIndex#1{\@bsphack
+%    \index{#1\actualchar{\protect\ttfamily#1}
+%           (option)\encapchar usage}%
+%    \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
+%           usage}\@esphack}
+%\def\DescribeOptions#1{\leavevmode\@bsphack
+%  \marginpar{\raggedleft\strut\emph{options}%
+%  \@for\@tempa:=#1\do{%
+%    \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa
+%  }}\@esphack\ignorespaces}
+%\makeatother
+% \newcommand{\progname}[1]{\textsf{#1}}
+%
+% \MakeShortVerb{|}
+% \GetFileInfo{sageep.dtx}
+% \title{\LaTeX{} Style for  Environmental and Engineering Geophysical
+% Society's Annual Meeting Papers
+%   \thanks{\copyright 2008, Boris Veytsman}}
+% \author{Boris Veytsman\thanks{%
+% \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}},
+% \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} 
+% \date{\filedate, \fileversion}
+% \maketitle
+% \begin{abstract}
+%   This package provides class for typesetting papers for
+%   Environmental and Engineering Geophysical Society's Annual
+%   Meeting, SAGEEP.  It is based on the recommendations for
+%   SAGEEP-2009.
+% \end{abstract}
+% \changes{v0.1}{2008/12/19}{First fully functional version} 
+% \changes{v1.0}{2009/01/14}{First publicly released version} 
+% \tableofcontents
+%
+% \clearpage
+%\section{Introduction}
+%\label{sec:intro}
+%
+% The Environmental and Engineering Geophysical Society (EEGS) is an
+% international scientific organization with about 700
+% members~\cite{EEGS_web_site}.  One of its main activities is its
+% annual meetings, the Application of Geophysics to Engineering and
+% Environmental Problems (SAGEEP).  The papers for this meeting are
+% accepted as PDF files.  This class typesets papers according to the
+% guidelines~\cite{SAGEEP09}, intended for SAGEEP-2009.  It should
+% probably work for the future SAGEEP, unless EEGS changes its
+% guidelines. 
+%
+% The class was commissioned and paid for by US Army Corps of
+% Engineers, Engineer Research and Development Center, 3909 Halls
+% Ferry Road, Vicksburg, MS 39180-6199.
+%
+%
+%\section{User Guide}
+%\label{sec:user_guide}
+%
+%
+%
+%\subsection{Installation}
+%\label{sec:ug_install}
+%
+% The class uses  some \LaTeX{} packages.  Normally they should be
+% present in any up-to-date distribution.  If you do not have them,
+% you can download them using the links below prior to using the class.
+%
+% You will need \progname{PSFNSS}~\cite{Schmidt04:PSNFSS9.2}: the
+% \LaTeX{} package providing the access to common PostScript fonts.
+% Of course you will need the fonts themselves.  You will also need
+% packages \progname{geometry}~\cite{Umeki08:Geometry},
+% \progname{caption}~cite{Sommerfeldt07:Caption} and
+% \progname{natbib}~\cite{Daly07:Natbib}.
+%
+%
+% The installation of the class follows the usual
+% practice~\cite{TeXFAQ} for \LaTeX{} packages:
+% \begin{enumerate}
+% \item Run \progname{latex} on |sageep.ins|.  This will produce the
+% \LaTeX{} class |sageep.cls|.
+% \item Put the files |sageep.cls| and |sageep.bst| to
+% the places where \LaTeX{} and Bib\TeX{} can find them (see
+% \cite{TeXFAQ} or the documentation for your \TeX{}
+% system).\label{item:install}
+% \item Update the database of file names.  Again, see \cite{TeXFAQ}
+% or the documentation for your \TeX{} system for the system-specific
+% details.\label{item:update}
+% \item The file |sageep.pdf| provides the documentation for the
+% package (this is the file you are probably reading now).
+% \end{enumerate}
+% As an alternative to items~\ref{item:install} and~\ref{item:update}
+% you can just put the files |sageep.cls| and |sageep.bst| in the
+% working directory where your |.tex| file is.
+%
+%
+%\subsection{Invocation}
+%\label{sec:ug_invocation}
+%
+% To use the class, put in the preamble of your document
+% \begin{flushleft}
+% |\documentclass[|\meta{options}|]{sageep}|
+% \end{flushleft}
+%
+% The class recoginzes the standard \LaTeX{} options, shared by the
+% most document classes~\cite{Lamport94}.
+% \DescribeOptions{8pt,9pt,10pt,11pt,12pt} The default font size
+% changing options (|8pt|, |9pt|, \dots, |12pt|) have no effect other
+% than producing a warning in the log.
+%
+%
+%\subsection{Use of the Class}
+%\label{sec:ug_use}
+%
+% Most of the standard \LaTeX{} commands work with the class.  Here we
+% document only the differences from the standard system.
+%
+%
+%\subsubsection{Front Matter}
+%\label{sec:ug_frontmatter}
+%
+%
+% \DescribeMacro{\title}
+% \DescribeMacro{\author}
+% \DescribeMacro{\maketitle}
+% The |\title| command works as usual.  The |\author| command should
+% include both the author's name and affiliation in the format
+% described in~\cite{SAGEEP09}  (first name, middle initial, last
+% name, name of organization/institution, city and state abbreviation
+% or country).  For papers with several authors you can issue several
+% |\author| commands.  For example,
+% \begin{verbatim}
+% \author{Sam A. Llaun, Academy of Lagado, Lagado, Balnibarbi}
+% \author{James Incandenza, Interdependence University, Boston, MA}
+% \end{verbatim}
+% The command |\maketitle| should be put \emph{after} |\title| and
+% |\author| commands.
+%
+%
+%\subsubsection{Sections}
+%\label{sec:ug_sections}
+%
+% \DescribeMacro{section}
+% The sections in SAGEEP articles are unnumbered.  Accordingly, the
+% command |\section| does not produce section number (and is
+% equivalent to the command |\section*|).
+%
+% There is a certain inconsistency in the format
+% guidelines~\cite{SAGEEP09}: the text says that section headings
+% should be in initial caps, while the headings in the sample are
+% uppercase.  Therefore the class does not change the case of the
+% headings and subheadings.  If
+% you enter them with initial caps, they will be typeset with initial
+% caps.  If you enter them in upper case, they will be typeset in
+% upper case.
+%
+% Note that ``Abstract'' should be the first section of the paper.  The
+% other obligatory sections are ``Conclusions'' and ``References''.
+%
+%
+%\subsubsection{Tables and Figures}
+%\label{sec:ug_floats}
+%
+% \DescribeMacro{\caption}
+% There is an important difference between the style of tables
+% required by~\cite{SAGEEP09} and the standard \LaTeX{} style:  the
+% caption of a table must be placed \emph{above} the table rather than
+% below it.  The class takes care of the proper spacing between the
+% caption and the table body, but it is your responsibility to put
+% the |\caption| command in a table first, and then the body of the
+% table, for example:
+% \begin{verbatim}
+% \begin{table}[htbp]
+%   \caption{North American Paper Sizes}
+%   \label{tab:paper}
+%   \begin{tabular}{lll}
+%     \hline
+%     Size & in $\times$ in &mm $\times$ mm\\
+%     \hline
+%     Letter &8.5 $\times$ 11 &216 $\times$ 279\\
+%     Legal &8.5 $\times$ 14 &216 $\times$ 356\\
+%     Junior Legal &8 x 5 &\\
+%     Ledger &17 $\times$ 11 &432 $\times$ 279\\
+%     Tabloid &11 $\times$ 17 &279 $\times$ 432\\
+%     \hline
+%   \end{tabular}
+% \end{table}
+% \end{verbatim}
+% Do not center table or figure body.  
+%
+% To include graphics  you can use, for example, the
+% \progname{graphics} bundle~\cite{Carlisle05:Graphics}.  It is
+% \emph{not} loaded automatically.
+%
+%
+%\subsubsection{References}
+%\label{sec:ug_refs}
+%
+% \DescribeMacro{\cite}
+% The class loads \progname{natbib} package~\cite{Daly07:Natbib} to
+% properly format the references.  It also redefines |\cite| to work
+% as |\citep|, producing a parenthetical (author, year) citation.  You
+% can get the other forms of citation using |\citet|, |\citeauthor| or
+% |\citeyear| commands of \progname{natbib}.
+%
+% The Bib\TeX{} style |sageep.bst| is supplied with the class to
+% format the list of references.  If you use Bib\TeX, just select this
+% bibliography style with |\bibliographystyle{sageep}|.
+%
+% \changes{v0.2}{2009/01/11}{Bibliography style change for manuals} 
+% This style has a non-standard treatment of manuals as required by
+% SAGEEP style:  the organization that published the manual is used as
+% an author of the manual for sorting and citation purposes.  Of
+% course this means that manuals should not have real authors, which
+% is usually the case with technical manuals.
+%
+%\StopEventually{%
+% \clearpage
+% \bibliography{sageep}
+% \bibliographystyle{unsrt}}
+% \clearpage
+%\section{Implementation}
+%\label{sec:impl}
+%
+%\subsection{Identification}
+%\label{sec:ident}
+%
+% We start with the declaration who we are.  Most |.dtx| files put
+% driver code in a separate driver file |.drv|.  We roll this code into the
+% main file, and use the pseudo-guard |<gobble>| for it.
+%    \begin{macrocode}
+%<class>\NeedsTeXFormat{LaTeX2e}
+%<*gobble>
+\ProvidesFile{sageep.dtx}
+%</gobble>
+%<class>\ProvidesClass{sageep}
+[2009/01/14 v1.0 Typesetting Papers for Environmental and 
+  Engineering Geophysical Society's Annual Meeting]
+%    \end{macrocode}
+%
+% And the driver code:
+%    \begin{macrocode}
+%<*gobble>
+\documentclass{ltxdoc}
+\usepackage{array}
+\usepackage{url,amsfonts}
+\usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black,
+            pagecolor=black,urlcolor=black,hyperindex=false]{hyperref}
+\PageIndex
+\CodelineIndex
+\RecordChanges
+\EnableCrossrefs
+\begin{document}
+  \DocInput{sageep.dtx}
+\end{document}
+%</gobble> 
+%<*class>
+%    \end{macrocode}
+%
+%
+%\subsection{Options}
+%\label{sec:options}
+%
+% \begin{macro}{\sageep@size@warning}
+% The font-changing options are not used in our setup, so we just
+% produce a warning:
+%    \begin{macrocode}
+\long\def\sageep@size@warning#1{%
+  \ClassWarning{sageep}{Size-changing option #1 will not be
+    honored}}%
+\DeclareOption{8pt}{\sageep@size@warning{\CurrentOption}}%
+\DeclareOption{9pt}{\sageep@size@warning{\CurrentOption}}%
+\DeclareOption{10pt}{\sageep@size@warning{\CurrentOption}}%
+\DeclareOption{11pt}{\sageep@size@warning{\CurrentOption}}%
+\DeclareOption{12pt}{\sageep@size@warning{\CurrentOption}}%      
+%    \end{macrocode}
+% \end{macro}
+%
+% All other options are just sent to the main class:
+%    \begin{macrocode}
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{book}}
+\ProcessOptions\relax
+%    \end{macrocode}
+% 
+%\subsection{Loading Class and Packages}
+%\label{sec:loading}
+%
+% We start with the base class
+%    \begin{macrocode}
+\LoadClass[12pt]{article}
+%    \end{macrocode}
+%
+%\subsection{Fonts}
+%\label{sec:fonts}
+%
+% We use Times for the main font.  The guidelines say nothing about other
+% fonts, but to reproduce the familiar look, we also use Helvetica for
+% the sans serifed font, and Courier for the monospaced font:
+%    \begin{macrocode}
+\usepackage{mathptmx}
+\usepackage[scaled]{helvet}
+\usepackage{courier}
+%    \end{macrocode}
+% 
+%\subsection{Page Dimensions and Paragraphing}
+%\label{sec:page}
+%
+% The requirements are 0.75'' margin top, left and right, and 1''
+% bottom.  
+%
+%    \begin{macrocode}
+\RequirePackage[top=0.75in, left=0.75in, right=0.75in, bottom=1in]{geometry}
+%    \end{macrocode}
+%
+%
+% \begin{macro}{\parindent}
+% The paragraphs have 0.5'' indentation
+%    \begin{macrocode}
+\setlength{\parindent}{0.5in}
+%    \end{macrocode}
+% \end{macro}
+%
+% We indent even the paragraphs after section heads:
+%    \begin{macrocode}
+\RequirePackage{indentfirst}
+%    \end{macrocode}
+% 
+%
+%\subsection{Headers and Footers}
+%\label{sec:headers}
+% 
+% No footers or headers:
+%    \begin{macrocode}
+\pagestyle{empty}
+%    \end{macrocode}
+% 
+%
+%
+%\subsection{Front Matter}
+%\label{sec:frontmatter}
+%
+% \begin{macro}{\author}
+%   The |\author| command can be repeated.  Each invocation adds an
+%   author and affiliation to the list of authors.  The following is
+%   adapted from~\cite{Downes04:amsart}.
+%    \begin{macrocode}
+\renewcommand{\author}[1]{%
+  \ifx\@empty\authors
+     \gdef\authors{#1}%
+  \else
+     \g@addto@macro\authors{\and#1}%
+  \fi}
+\let\authors\@empty
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\maketitle}
+%   Now we are ready to make the title.  The title and authors are
+%   centered.
+%    \begin{macrocode}
+\def\maketitle{%
+  \bgroup
+  \centering
+  \ifx\@empty\@title\relax
+  \else
+    {\large\bfseries\MakeUppercase{\@title}\par\vspace{\baselineskip}}%
+  \fi
+  \ifx\@empty\authors\relax
+  \else
+    {\let\and=\linebreak
+      \normalfont\itshape\authors\par\vspace{\baselineskip}}%
+  \fi
+  \egroup}
+%    \end{macrocode}
+%   
+% \end{macro}
+%
+%
+%\subsection{Sectioning}
+%\label{sec:sectioning}
+%
+%
+% We do not number sections:
+%    \begin{macrocode}
+\setcounter{secnumdepth}{0}
+%    \end{macrocode}
+% 
+%
+% \begin{macro}{\section}
+%   Sections are in 14\,pt bold centered.
+%    \begin{macrocode}
+\renewcommand\section{\@startsection{section}{1}{0pt}{\baselineskip}%
+  {\baselineskip}{\normalfont\centering\large\bfseries}}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\subsection}
+%   Subsections are bold, italics, normal size:
+%    \begin{macrocode}
+\renewcommand\subsection{\@startsection{subsection}{2}{0pt}{\baselineskip}%
+  {1sp}{\normalfont\normalsize\itshape\bfseries}}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+%
+%\subsection{Floats}
+%\label{sec:floats}
+%
+% We use \progname{caption} package~\cite{Sommerfeldt07:Caption} for
+% control of captions:
+%    \begin{macrocode}
+\RequirePackage{caption}
+%    \end{macrocode}
+% 
+% Captions are justified left with ``Figure'' or ``table'' in boldface:
+%    \begin{macrocode}
+\captionsetup{labelfont=bf, indent=0pt, singlelinecheck=off}
+%    \end{macrocode}
+% 
+% For tables the caption is above the table:
+%    \begin{macrocode}
+\captionsetup[table]{position=above}
+%    \end{macrocode}
+% 
+% \changes{v0.2}{2009/01/11}{Changed floats parameters} 
+% We change the parameters of float placement according to the
+% recommendations from~\cite{Oostrum97:Floats}:
+%    \begin{macrocode}
+\renewcommand{\textfraction}{0.05}
+\renewcommand{\topfraction}{0.95}
+\renewcommand{\bottomfraction}{0.95}
+\renewcommand{\floatpagefraction}{0.35}
+\setcounter{totalnumber}{5}
+%    \end{macrocode}
+% 
+%
+%
+%\subsection{Bibliography}
+%\label{sec:biblio}
+%
+% We use \progname{natbib}~\cite{Daly07:Natbib}.
+%    \begin{macrocode}
+\RequirePackage[round]{natbib}
+%    \end{macrocode}
+% \begin{macro}{\cite}
+%   We redefine |\cite| to be |\citep|:
+%    \begin{macrocode}
+\let\cite=\citep
+%    \end{macrocode}
+%   
+% \end{macro}
+%
+% \subsection{The final word}
+%\label{sec:final}
+%
+%    \begin{macrocode}
+%</class>      
+%    \end{macrocode}
+%   
+%\Finale
+%\clearpage
+%
+%\PrintChanges
+%\clearpage
+%\PrintIndex
+%
+\endinput
diff --git a/Master/texmf-dist/source/latex/sageep/sageep.ins b/Master/texmf-dist/source/latex/sageep/sageep.ins
new file mode 100644
index 00000000000..a9956c6c04b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/sageep/sageep.ins
@@ -0,0 +1,32 @@
+%
+% Doctrip file for sageep
+% This file is in public domain
+% $Id: sageep.ins,v 1.2 2008-12-22 04:42:31 boris Exp $
+%
+\def\batchfile{sageep.ins}
+\input docstrip
+\keepsilent
+\showprogress
+
+
+\askforoverwritefalse
+
+\generate{%
+  \file{sageep.cls}{\from{sageep.dtx}{class}}}
+
+\obeyspaces
+\Msg{*****************************************************}%
+\Msg{* Congratulations!  You successfully  generated the *}%
+\Msg{* sageep package.                                   *}%
+\Msg{*                                                   *}%
+\Msg{* Please move the file sageep.cls to a place where  *}%
+\Msg{* LaTeX files are stored on your system. Move the   *}%
+\Msg{* file sageep.bst to the a place where BibTeX files *}%
+\Msg{* are stored on your system.                        *}%
+\Msg{*                                                   *}%
+\Msg{* The manual is sageep.pdf.                         *}%
+\Msg{*                                                   *}%
+\Msg{* The package is released under LPPL                *}%
+\Msg{*                                                   *}%
+\Msg{* Happy TeXing!                                     *}%
+\Msg{*****************************************************}%
\ No newline at end of file