trunk/Master/texmf-dist/source/latex/uaclasses

git-svn-id: svn://tug.org/texlive/trunk@568 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 1473 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/uaclasses/README b/Master/texmf-dist/source/latex/uaclasses/README
new file mode 100644
index 00000000000..ee2eb48e0a7
--- /dev/null
+++ b/Master/texmf-dist/source/latex/uaclasses/README
@@ -0,0 +1,48 @@
+Readme file for the package "ua-classes".  Date: 1997/03/08
+-----------------------------------------------------------
+
+This package provides a LaTeX2e document class named 'ua-thesis' for
+typesetting theses and dissertations in the official format required by the
+University of Arizona.  Moreover, there is a fully compatible alternative
+document class 'my-thesis' for private "nice" copies of the dissertation,
+and the respective title pages are available as separate packages to work
+with "any" document class.
+
+
+The distribution contains the following files:
+
+README          This file.
+
+ua-classes.dtx  User guide and documented source code.
+                Run 'latex ua-classes.dtx' to obtain user documentation.
+
+ua-classes.ins  Installation file.
+                Run 'latex ua-classes.ins' to install the package.
+                Generates the following files:
+                ua-thesis.cls, my-thesis.cls, ua-title.sty, my-title.sty
+
+ua-example.tex  An example dissertation generated from the University
+                of Arizona Manual for Theses and Dissertations.
+
+ua-example.dvi  Example output formatted with ua-thesis.cls
+                and the draft option (from 'ua-example.tex')
+
+my-example.dvi  Example output formatted with my-thesis.cls
+
+
+The following software needs to be installed on the user's system:
+
+LaTeX           version 2e, December 1994 or later
+AMS-LaTeX       version 1.2, October 1996 or later
+AMSFonts        version 2.0, January 1995 or later
+
+
+Changes from release 1996/12/05:
+
+                Fixed placement and fonts of captions in my-thesis.cls
+                Fixed required release date of AMS macros
+                
+
+Send comments to:
+
+Marcel Oliver   moliver@math.uci.edu
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/uaclasses/ua-classes.dtx b/Master/texmf-dist/source/latex/uaclasses/ua-classes.dtx
new file mode 100644
index 00000000000..114672bc187
--- /dev/null
+++ b/Master/texmf-dist/source/latex/uaclasses/ua-classes.dtx
@@ -0,0 +1,1403 @@
+% \iffalse
+%%
+%% File ua-classes.dtx by Marcel Oliver
+%%
+%% Documentation can be obtained by running "latex labels.dtx"
+%%
+%<*dtx>
+\ProvidesFile{ua-classes.dtx}
+%</dtx>
+%<driver>\ProvidesFile{ua-classes.drv}
+%
+%<*driver>
+\documentclass{ltxdoc}
+\begin{document}
+\DocInput{ua-classes.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \title{Document Classes for \\
+%        Writing Theses and Dissertations \\
+%        for Submission at the University of Arizona}
+% \author{Marcel Oliver}
+% \date{1996/05/09}
+% \maketitle
+%
+% \begin{abstract}
+% This package provides a \LaTeXe\ document class named |ua-thesis|
+% for typesetting theses and dissertations in the official format required
+% by the University of Arizona.  
+% Moreover, there is a fully compatible alternative document class
+% |my-thesis| for private copies of the dissertation, and the respective
+% title pages are available as separate packages to work with ``any''
+% document class.  
+% \end{abstract}
+% 
+%
+% \section{User Documentation}
+%
+% \subsection{Introduction}
+%
+% The |ua-thesis| document class is designed to conform with the official
+% requirements of the Graduate College of the University of Arizona.  It is
+% based on the |report| class which comes with the standard \LaTeX\
+% distribution, and all commands are upward compatible with |report|
+% and to a large extend with the |amsbook| class.  In other words, any
+% document which works error free in those two classes should run with
+% |ua-thesis|, too.  To automatically typeset all the required information,
+% a few new commands are defined, which are explained below.
+%
+%
+% \subsection{Classes and Options}
+%
+% The following classes and packages are provided:
+%
+% \begin{description}
+%
+% \item[\texttt{ua-thesis}]
+% The official University of Arizona thesis document class.  The |draft|
+% option is a paper saver---the automatic generation of front matter pages
+% other than the title page will be suppressed, and single spaced printing
+% will be used throughout the document.  The |final| option activates
+% ``double spaced'' layout at the required places and creates the full set
+% of front matter pages.  The default is |draft|. 
+%
+% Note that the draft option is passed through to the underlying |report|
+% class, i.e.\ thick black rules will indicate the location of overfull
+% |hbox|es.
+%
+% The |ua-thesis| class automatically loads the |amsmath|, |amssymb| and
+% |amsthm| packages which considerably improve the mathematical
+% typesetting capabilities of \LaTeX.  The use of these macros is strongly
+% recommended. 
+%
+% The default type-size in this document class is 12pt and should not be
+% changed.  Subsubsections 
+% produce unnumbered run-in headings which do not appear in the Table of
+% Contents, therefore their use is discouraged.
+%
+% \item[\texttt{my-thesis}]
+% An alternative to |ua-thesis| to produce private copies of your
+% dissertation which don't look so reminiscent of the typewriter age.  It
+% is based on the |pcms-l| document class by the American Mathematical
+% Society, which was designed to typeset monographs for the Park City/IAS
+% Mathematics Series.  It is similar to |amsbook|, but has a less crowded
+% look.
+%
+% \item[\texttt{ua-title}]
+% The official University of Arizona title page as a separate package.
+% Useful if you want to build your own private thesis class, but want to
+% use the official title page.  It redefines the |\maketitle| command and
+% also provides (potentially useless) definitions for all the commands
+% described in the next section.
+%
+% The package is neither guaranteed nor tested to work with any specific
+% document class.  You have to try and see.
+%
+% \item[\texttt{my-title}]
+% The equivalent to |ua-title|, but with the title page of the |my-thesis|
+% class. 
+% 
+% \end{description}
+% So, the first line in your dissertation file should be
+% \begin{verbatim}
+%   \documentclass{ua-thesis}
+% \end{verbatim}
+% or, for the final printout,
+% \begin{verbatim}
+%   \documentclass[final]{ua-thesis}
+% \end{verbatim}
+% If you change the document class from |ua-thesis| to |my-thesis| or vice
+% versa, the 
+% first \LaTeX\ run might produce error messages because the format of the
+% auxiliary files (|.aux|, |.toc| etc.) is incompatible between the two.
+% Type |s| or |q| to ignore all error messages and run \LaTeX\ a second
+% time, or manually delete all auxiliary  
+% files before changing the document class.
+% 
+%
+% \subsection{Commands for Specifying the Front Matter}
+%
+% As in the standard document classes, the title of your thesis is
+% specified by
+% \begin{verbatim}
+%   \title{This is the Title of my Dissertation \\
+%          and This is the Second Line}
+% \end{verbatim}
+% where line breaks can be forced with |\\| if the automatic line
+% breaking does not give a satisfactory result.  But remember, the Graduate
+% College imposes a maximum of three lines in the title---\LaTeX\ does not
+% check this for you.  An optional argument can be given for reasons of
+% compatibility with the AMS classes, but will be ignored.
+%
+% Your name is specified with
+% \begin{verbatim}
+%   \author{Firstname Lastname}
+% \end{verbatim}
+% again, an optional argument will be ignored.  Use
+% \begin{verbatim}
+%   \date{1996}
+% \end{verbatim}
+% set the year of your graduation.  If you omit this command, the current
+% day, month and year will be printed, which may be useful for keeping
+% track of different draft versions.
+% The only other command that is required for the final version of every
+% dissertation is 
+% \begin{verbatim}
+%   \director{Firstname Lastname}
+% \end{verbatim}
+% to specify the name of your dissertation advisor.  It will appear on the
+% Special Abstract which is automatically generated.  
+%
+% Now the optional commands. The name of your department is set with
+% \begin{verbatim}
+%   \department{Department of Metaphysics}
+% \end{verbatim}
+% The default is ``Graduate Interdisciplinary Program in Applied
+% Mathematics''. If you are in the ``Department of Metaphysics'', you have
+% to use this command.
+%
+% If you are writing a Masters thesis, you have to explicitly specify the
+% name of your degree.  Use
+% \begin{verbatim}
+%   \degree{Masters of Arts}
+% \end{verbatim}
+% The default is ``Doctor of Philosophy''.  The abbreviation of the
+% degree is needed for the Special Abstract and can be with
+% \begin{verbatim}
+%   \degreeabbrev{M.A.}
+% \end{verbatim}
+% The default is ``Ph.D.''.  Moreover, for Masters theses, the Copyright
+% Page will have an additional part for the approval signature of your
+% advisor.  It will be automatically generated whenever you specify your
+% advisor's title with
+% \begin{verbatim}
+%   \directortitle{Professor of Mathematics}
+% \end{verbatim}
+% The default is empty and \emph{must not be changed for doctoral
+% dissertations}. 
+%
+% If you have to specify a major department
+% different from the department above, use
+% \begin{verbatim}
+%   \major{Agriculture}
+% \end{verbatim}
+% The default is empty.  
+%
+% You can copyright your dissertation or thesis by writing
+% \begin{verbatim}
+%   \copyrightholder{Firstname Lastname Year}
+% \end{verbatim}
+% The default is empty.  If you use this command, the 
+% Copyright Page will automatically change to the required
+% legalese for copyrighted dissertations or theses.
+% 
+%
+% \subsection{Examples for the Root File}
+%
+% For long documents such as theses, it is useful to split the \LaTeX\
+% source code into several files.  The root file is the file that you run
+% \LaTeX\ on.  Subordinate files are included with |\include|.
+%
+% \subsubsection{A Doctoral Dissertation}
+%
+% The example below also shows how to load the |graphics| package, which in
+% particular supports the inclusion of postscript images.  Note that you
+% can specify the |draft| or |final| option for the graphics package
+% separate from the global options of the document class.
+%
+% The |ua-thesis| class is designed to create a |.dvi| file that strictly
+% adheres to the required page margins.   The printer hardware or the
+% driver implementation, however, may have tolerances that cause the image
+% to shift on the page.  This can be corrected by using |\hoffset|
+% and |\voffset|.  The example below works well with the current printers
+% in the Math Department.
+%
+% You don't need to use |\chapter*{Dedication}| for the Dedication if you
+% don't like the heading.  You can simply start a new page with |\newpage|,
+% but then you are completely responsible for the formatting of that page,
+% including the switch to double-spaced printing as is officially required
+% (this can be done, for example, by using |\doublespaced|).
+%
+% \begin{verbatim}
+% \documentclass[draft]{ua-thesis}
+% \usepackage[final]{graphics}
+%
+% \hoffset -2.1mm
+%
+% \director{Advisor's Name}
+% \date{1996}
+%
+% \title{This is a Doctoral Dissertation}
+% \author{Your Name}
+%
+% \begin{document}
+%
+% \maketitle
+%
+% \chapter*{Acknowledgments}
+% Acknowledgments go here.
+%
+% \chapter*{Dedication}
+% Dedicated to the Fundamental Theorem of Calculus.
+%
+% \tableofcontents
+% \listoffigures
+% \listoftables
+%
+% \begin{abstract}
+% This is the abstract. 
+% \end{abstract}
+%
+% \include{chapter1}
+% \include{chapter2}
+% \appendix
+% \include{appendix}
+%
+% \begin{thebibliography}{99}
+% And the bibliography goes here.  
+% \end{thebibliography}
+%
+% \end{document}  
+% \end{verbatim}
+%
+% \subsubsection{A Masters Thesis}
+%
+% This thesis is copyrighted, but does not have Acknowledgments or a
+% Dedication.  It is written by a student in the Department of
+% Mathematics. 
+%
+% \begin{verbatim}
+% \documentclass[final]{ua-thesis}
+%
+% \hoffset -2.1mm
+%
+% \director{Advisor's Name}
+% \directortitle{Professor of Mathematics}
+% \degree{Master of Science}
+% \degreeabbrev{M.S.}
+% \department{Department of Mathematics}
+% \date{1996}
+%
+% \title{This is a Masters Thesis}
+% \author{Your Name}
+% \copyrightholder{Your Name 1996}
+%
+% \begin{document}
+%
+% \maketitle
+% \tableofcontents
+% \listoffigures
+% \listoftables
+%
+% \begin{abstract}
+% This is the abstract. 
+% \end{abstract}
+%
+% \include{chapter1}
+% \include{chapter2}
+% \appendix
+% \include{appendix}
+%
+% \begin{thebibliography}{99}
+% And the bibliography goes here.  
+% \end{thebibliography}
+%
+% \end{document}  
+% \end{verbatim}
+%
+% \subsection{The Files and Further Documentation}
+%
+% Currently, the sources and all documentation are contained in the
+% following three files.
+% \begin{description}
+%
+% \item[\texttt{ua-classes.dtx}]
+% User guide and documented source code.  The document you are reading has
+% been obtained by running |latex ua-classes.dtx|. 
+%
+% \item[\texttt{ua-classes.ins}]
+% The installation file. Running |latex ua-classes.ins| will 
+% generate the class  files |ua-thesis.cls| and  |my-thesis.cls| as well
+% as the title page packages
+% |ua-title.sty| and |my-title.sty| from the universal source file
+% |ua-classes.dtx|.
+%
+% \item[\texttt{ua-example.tex}]
+% An example dissertation generated from the official Manual for Theses and
+% Dissertations by the Graduate College.  The file has been obtained via
+% the web and manually converted into \LaTeX.  It both serves as an example
+% and contains the official formating instructions as of May 1996.  Be sure
+% to check for changes before you submit your dissertation. 
+%
+% \end{description}
+%
+%
+% \subsection{Bugs and Changes}
+%
+% All changes and bug fixes must be done in the file |ua-classes.dtx|,
+% and \emph{not} in the files generated by the docstrip utility.  Moreover,
+% they must be clearly annotated with a date, name and comments explaining
+% each change.
+%
+%
+% \section{The Code}
+%
+% This section contains a commented listing of the source code.
+% It is intended for \TeX perts to facilitate alterations and
+% debugging (hopefully the latter will not become necessary).
+% 
+% \subsection{The Identification Part}
+%
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}
+%<*ua-thesis>
+\ProvidesClass{ua-thesis}
+              [1997/03/08 UA Thesis Class]
+%</ua-thesis>
+%<*my-thesis>              
+\ProvidesClass{my-thesis}
+              [1997/03/08 My Private Thesis Class]
+%</my-thesis>
+%<*ua-title>
+\ProvidesPackage{ua-title}[1997/03/08]
+%</ua-title>
+%<*my-title>
+\ProvidesPackage{my-title}[1997/03/08]
+%</my-title>
+%    \end{macrocode}
+%
+% \subsection{Package Options}
+%
+% We pass the global package options through to the underlying
+% document class.  In the |ua-thesis| class we also keep track of
+% whether the |draft| or |final| option is switched on because
+% we will link certain document features (see Section 1) to
+% this option.
+%    \begin{macrocode}
+%<*ua-thesis>
+\newif\iffinal@
+\DeclareOption{final}{%
+  \final@true
+  \PassOptionsToClass{final}{report}}
+\DeclareOption{draft}{%
+  \final@false
+  \PassOptionsToClass{draft}{report}}
+\ExecuteOptions{draft}  
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
+\ProcessOptions
+%</ua-thesis>
+%    \end{macrocode}
+% In the |my-thesis| class, nothing particular happens.
+%    \begin{macrocode}
+%<*my-thesis>
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{amsbook}}
+\ProcessOptions
+%</my-thesis>
+%    \end{macrocode}
+%
+% \subsection{The Underlying Document Classes}
+%
+% The official |ua-thesis| class is based on the standard |report|
+% document class.  We load it with the |12pt| option as default,
+% which is smallest size allowed.  We have to load the 
+% packages of the AMS math bundle explicitly.
+% Added 1997/3/8: In fact, even |ua-thesis| breaks with old versions
+% of the AMS macros, so we add a release date to |\RequirePackage|.
+%    \begin{macrocode}
+%<*ua-thesis>
+\LoadClass[12pt]{report}
+\RequirePackage[reqno]{amsmath}[1996/10/24]
+\RequirePackage{amsfonts}[1996/10/24]
+\RequirePackage{amsthm}[1996/10/24]
+\RequirePackage{ua-title}
+%</ua-thesis>
+%    \end{macrocode}
+% We want the equation numbers on the right, thus the |reqno| option.
+%
+% The |my-thesis| class is based on the |amsbook| class
+% with modifications adopted from the |pcms-l| package, also by the
+% AMS.  The packages of the AMS math bundle are loaded by default from
+% within |amsbook|.  Added 1996/12/05: The updated version works only
+% with the new release of the AMS macros, dated 1996/10/24.
+%    \begin{macrocode}
+%<*my-thesis>
+\LoadClass[reqno]{amsbook}[1996/10/24]
+\RequirePackage{my-title}
+%</my-thesis>
+%    \end{macrocode}
+%
+% \subsection{General Style Settings for \texttt{ua-thesis}}
+%
+% Redefine the name of the Table of Contents and the References
+% according to the Graduate College regulations.
+% We also have to redefine |\listfigurename| and |\listtablename| with
+% |\def| (although the names are not changed),
+% otherwise they have the wrong status with respect to the \TeX
+% internals |\outer| and |\long|, and the |\ifx| statements in the
+% |\@chapterstar| macro won't work.
+%    \begin{macrocode}
+%<*ua-thesis>
+\def\contentsname{Table of Contents}
+\def\bibname{References}
+\def\dedicationname{Dedication}
+\def\listfigurename{List of Figures}
+\def\listtablename{List of Tables}
+%    \end{macrocode}
+% Set the page margins as required by the Graduate College: Top margin is
+% $1.5$in, bottom margin is $1$in, left margin is $1.5$in and the right
+% margin is $1$in.  We grant an extra $0.2$in to the bottom margin to allow
+% for printer tolerances and to account for characters that extend below
+% the base line (e.g.\ the character ``y'').
+%    \begin{macrocode}
+\topmargin      0in
+\headheight     \baselineskip
+\headsep        0.6in
+\addtolength{\headsep}{-\headheight}
+\footskip       0in
+\textheight     \paperheight
+\addtolength{\textheight}{-2.7in}
+\oddsidemargin  0.5in
+\evensidemargin 0.5in
+\marginparwidth 0in
+\marginparsep   0in
+\textwidth      \paperwidth
+\addtolength{\textwidth}{-2.5in}
+%    \end{macrocode}
+% Macros to switch from single-spaced to double-spaced printing.
+% The command |\doublespaced| takes only effect when it is used
+% with the |final| option.
+%    \begin{macrocode}
+\def\singlespaced{\baselineskip=\normalbaselineskip}
+\def\doublespaced{\iffinal@ \baselineskip=1.5\normalbaselineskip \fi}
+%    \end{macrocode}
+% Finally, we define the page styles as required.  As we are modifying the
+% |\topskip| when typesetting chapter headings and when selecting
+% page style |continued|, we save the default value and restore
+% it on ``normal'' pages.
+%    \begin{macrocode}
+\newlength{\@topskipsave}
+\@topskipsave\topskip
+%    \end{macrocode}
+% The page style |topright| is used on normal pages.  It puts
+% the page number into the top
+% header at the right margin of each page.
+%    \begin{macrocode}
+\def\ps@topright{%
+    \let\@mkboth\@gobbletwo
+    \topskip\@topskipsave
+    \def\@oddhead{\normalfont\hfil\thepage}
+    \let\@evenhead\@oddhead
+    \def\@evenfoot{}
+    \def\@oddfoot{}}
+%    \end{macrocode}
+% Page style |continued| is for the second and following pages of
+% the Table of Contents, the List of Figures and the List of Tables.
+% The macro |\@continued| contains the required heading for those
+% pages, e.g.\ ``Table of Contents---Continued''.
+%    \begin{macrocode}
+\def\ps@continued{%
+    \let\@mkboth\@gobbletwo
+    \topskip 0.5in
+    \def\@oddhead{\raisebox{-0.5in}{\@continued}%
+                  \hfil\normalfont\thepage}
+    \let\@evenhead\@oddhead
+    \def\@evenfoot{}
+    \def\@oddfoot{}}
+%    \end{macrocode}
+% The \TeX\ mechanism for starting pages is rather mysterious.  There is
+% some extra space associated with the variable |\topskip|. However, it
+% is not sufficient to just set |\topskip| to zero.  One moreover has to
+% place a box of zero height onto the page, otherwise \TeX\ inserts extra
+% vertical space, and we lose precise control over the placements
+% of the layout elements.  The following macro is called whenever a
+% title page (main title, chapter title, etc.) is started.
+%    \begin{macrocode}
+\def\@notopskip{\topskip\z@ \hrule height\z@}
+%</ua-thesis>
+%    \end{macrocode}
+%
+% \subsection{Some Style Defaults of the \texttt{my-thesis} Class}
+%
+% We mostly follow the defaults given by the |amsbook| class, but there
+% are few things worth changing.  First we add some space between the items
+% of a list---we don't have to be too stingy with vertical space.
+% The next four lines are copied from |amsbook.cls| with changed definition
+% for |\itemsep|.
+%    \begin{macrocode}
+%<*my-thesis>
+\def\@listI{\leftmargin\leftmargini \parsep\z@skip
+  \topsep\listisep \itemsep\topsep
+  \listparindent\normalparindent}
+\let\@listi\@listI
+%    \end{macrocode}
+% Moreover, sections are to be numbered within chapters, and we give the
+% Abstract the appearance of an unnumbered chapter.
+%    \begin{macrocode}
+\numberwithin{section}{chapter}
+\renewenvironment{abstract}%
+  {\chapter*{Abstract}}{}
+%    \end{macrocode}
+% We must define a bibliography style to avoid an error message.
+%    \begin{macrocode}  
+\bibliographystyle{amsplain}
+%</my-thesis>
+%    \end{macrocode}
+%
+% \subsection{The Title Page Packages}
+%
+% The title page macros are put into separate files, so that they can
+% be used in conjunction with other document classes, if this is
+% desirable.
+%
+% First some common code that defines the macros for
+% various layout elements in the title page(s).  The |my-thesis| class
+% will not use all of them, but their definition is required anyway to
+% assure compatibility with |ua-thesis|. The defaults are set as follows:
+%    \begin{macrocode}
+%<*ua-title|my-title>
+\let\@title\@empty
+\let\@author\@empty
+\let\@copyright\@empty
+\def\@thesis{Dissertation}
+\def\@department{Graduate Interdisciplinary Program \\
+                 in Applied Mathematics}
+\def\@degree{Doctor of Philosophy}
+\def\@degreeabbrev{Ph.D.}
+\let\@major\@empty
+\let\@director\@empty
+\let\@directortitle\@empty
+%    \end{macrocode}
+% In the following, changed |\newcommand| to |\renewcommand|
+% because the new release
+% of the AMS classes seems to define |\copyrightholder| while the
+% old release doesn't (1996/12/05).
+%    \begin{macrocode}
+\def\copyrightholder#1{\gdef\@copyright{#1}}
+\newcommand{\thesis}         [1]{\gdef\@thesis{#1}}
+\newcommand{\department}     [1]{\gdef\@department{#1}}
+\newcommand{\degree}         [1]{\gedf\@degree{#1}}
+\newcommand{\degreeabbrev}   [1]{\gedf\@degreeabbrev{#1}}
+\newcommand{\major}          [1]{\gdef\@major{#1}}
+\newcommand{\director}       [1]{\gdef\@director{#1}}
+\newcommand{\directortitle}  [1]{\gdef\@directortitle{#1}}
+%    \end{macrocode}
+% We redefine the |\title| and |\author| commands to follow the
+% AMS syntax.  The optional
+% argument allowed in the AMS classes is simply ignored without
+% an error message.
+%    \begin{macrocode}
+\renewcommand{\title} [2][]{\gdef\@title{#2}}
+\renewcommand{\author}[2][]{\gdef\@author{#2}}
+%</ua-title|my-title>
+%    \end{macrocode}
+% 
+%
+% \subsubsection{The Official Title Page}
+% 
+% This macro is largely self-explanatory \ldots
+%
+%    \begin{macrocode}
+%<*ua-title>
+\def\@SetTitlePage{%
+  \thispagestyle{empty}
+  \begingroup
+    \centering
+    \@notopskip
+    \vspace*{1in}
+    \begingroup
+      \Large\scshape
+      \addtolength{\baselineskip}{8pt}
+      \@title \\
+    \endgroup
+    \vspace*{\stretch{1}}
+    by \\[5pt]
+    \@author \\
+    \hrule height\z@
+    \vspace*{\stretch{2}}
+    \begingroup
+      \rule{2in}{0.7pt} \\
+      \ifx\@empty\@copyright
+        \else Copyright \copyright\ \@copyright \\
+        \fi
+    \endgroup
+    \vspace*{\stretch{2}}
+    \begingroup
+%    \end{macrocode}
+% The following line sets the inter-word space to twice its original value.
+%    \begin{macrocode}
+      \spaceskip1.3\fontdimen2\font plus1.3\fontdimen3\font
+      A \@thesis\ Submitted to the Faculty of the \\[8pt]
+      \textsc{\large\@department} \\[8pt]
+      In Partial Fulfillment of the Requirements \\
+      For the Degree of \\[8pt]
+      \textsc{\large\@degree}
+      \ifx\@empty\@major
+         \else \\
+               \textsc{\large With a Major in \@major}
+         \fi \\[8pt]
+      In the Graduate College \\[8pt]
+      \textsc{\large The University of Arizona} \\
+    \endgroup
+    \vspace*{\stretch{1}}
+    \spaced{\@date}
+    \vspace*{0.5in}
+    \newpage
+  \endgroup}
+%    \end{macrocode}
+% To make |\@SetTitlePage| work with standard document classes, we redefine
+% |\maketitle| to be |\@SetTitlePage|.  This choice will later be
+% overridden by the |ua-thesis| class.
+%    \begin{macrocode}
+\let\maketitle\@SetTitlePage
+%</ua-title>
+%    \end{macrocode}
+%
+%
+% \subsubsection{My Title Page}
+%
+% Here we can simply redefine |\maketitle| directly without the help of
+% an auxiliary macro.
+%    \begin{macrocode}
+%<*my-title>
+\def\maketitle{%
+  \cleardoublepage
+  \thispagestyle{empty}
+  \begingroup
+    \centering
+    \vspace*{\stretch{1}}
+    \hrule height 1pt
+    \begingroup
+      \Huge\bfseries
+      \addtolength{\baselineskip}{2pt}
+      \medskip
+      \@title \\
+      \medskip
+    \endgroup
+    \hrule height 1pt
+    \vspace*{\stretch{1}}
+    \begingroup
+      \huge \@author \\
+    \endgroup
+    \vspace*{\stretch{1.7}}
+    \begingroup
+      \Large
+      \spaceskip1.3\fontdimen2\font plus1.3\fontdimen3\font
+      A \@thesis\ Submitted to the Faculty of the \\[8pt]
+      \textsc{\LARGE\@department} \\[8pt]
+      In Partial Fulfillment of the Requirements \\
+      For the Degree of \\[8pt]
+      \textsc{\LARGE\@degree}
+      \ifx\@empty\@major
+         \else \\
+               \textsc{\LARGE With a Major in \@major}
+         \fi \\[8pt]
+      In the Graduate College \\[8pt]
+      \textsc{\LARGE The University of Arizona} \\
+    \endgroup
+    \vspace*{0.8cm}
+    {\Large\spaced{\@date}}
+    \newpage
+  \endgroup}
+%</my-title>
+%    \end{macrocode}
+%
+%
+% \subsubsection{Setting the Date with Spaces Between Digits}
+% 
+% In order to increase the inter-letter space in the date, we resort to
+% a technique which is a simplified version of the 
+% |letterspace| package (by Philip Taylor, described in The
+% \LaTeX\ Companion).  The macro |\spaced| puts spaces between all the
+% characters of its argument.  
+%    \begin{macrocode}
+%<*ua-title|my-title>
+\def \spaced #1%
+    {\edef \3{#1}%
+     {\expandafter \insertsp@ces \3\@nd}%
+    }
+\def \insertsp@ces #1#2\@nd
+    {\def \1{#1}%
+     \def \2{#2}%
+     \1%
+     \ifx \1\empty \else \ifx \2\empty \else \space \fi \fi
+     \ifx \2\empty
+          \let \n@xt = \relax
+     \else
+          \futurelet \2\m@kespaceexplicit #2\@nd
+          \def \n@xt {\expandafter \insertsp@ces \2\@nd}%
+     \fi
+     \n@xt
+    }
+\def \m@kespaceexplicit #1#2\@nd %
+    {\if \2 \def \2{{ }#1#2}\else \def \2{#1#2}\fi}
+%</ua-title|my-title>
+%    \end{macrocode}
+%
+%
+% \subsubsection{Official Approval and Copyright Pages}
+%
+% This code is specific to the |ua-thesis| class.  Here |\maketitle|
+% has to invoke the automatic generation of the Approval and the Copyright
+% Page, provided that the |final| option is set. 
+%    \begin{macrocode}
+%<*ua-thesis>
+\def\maketitle{%
+  \cleardoublepage
+  \begingroup
+    \@SetTitlePage
+    \iffinal@
+      \@SetApprovalForm
+      \@SetAuthorStatement
+    \fi
+  \endgroup
+  \let\maketitle\relax}
+%    \end{macrocode}
+% Make an empty approval page which is eventually to be substituted by
+% the official approval page from the Graduate College.  This macro is
+% only called if the |final| option is set.
+%    \begin{macrocode}
+\def\@SetApprovalForm{%
+  \pagestyle{topright}
+  \@notopskip
+  \vspace*{\fill}
+  \begin{center}
+    \Large
+    Get the official approval page \\
+    from the Graduate College \\
+    \textsl{before} your final defense.
+  \end{center}
+  \vspace*{\fill}
+  \vspace*{0.5in}
+  \newpage}
+%    \end{macrocode}
+% Now the Copyright page.  The copyright page is also printed only
+% with the |final| option in place.
+%    \begin{macrocode}
+\def\@SetAuthorStatement{%
+   \begingroup
+     \pagestyle{topright}
+     \@notopskip
+     \vspace*{1in}
+     \begingroup
+       \centering\large\scshape
+       Statement by Author \\
+     \endgroup
+     \bigskip\bigskip
+     \par
+     This \MakeLowercase{\@thesis} has been submitted in partial
+     fulfillment of requirements for an advanced degree at The
+     University of Arizona and is deposited in the University
+     Library to be made available to borrowers under rules
+     of the Library.
+     \bigskip
+     \par
+     Brief quotations from this \MakeLowercase{\@thesis} are
+     allowable without special permission, provided that accurate
+     acknowledgment of source is made. Requests for permission for
+     extended quotation from or reproduction of this manuscript in
+     whole or in part may be granted by the
+     \ifx\@empty\@copyright
+       head of the major department or the Dean of the Graduate
+       College when in his or her judgment the proposed use of
+       the material is in the interests of scholarship.
+       In all other instances, however,
+       permission must be obtained from the author.
+     \else
+       copyright holder.
+     \fi
+     \par
+     \vspace*{3\baselineskip}
+     \begin{flushright}
+       \scshape
+       Signed: \underline{\makebox[2.5in][r]{}}
+     \end{flushright}
+     \vspace*{\fill}
+     \ifx\@empty\@directortitle
+     \else
+       \begingroup
+          \centering
+          \large\scshape
+          Approval by \@thesis\ Director
+       \endgroup
+       \bigskip\bigskip\par
+       This \MakeLowercase{\@thesis} has been approved
+       on the date shown below:
+       \vspace*{3\baselineskip}\par\noindent
+       \begin{minipage}[t]{0.45\textwidth}
+         \begin{center}
+           \underline{\makebox[\textwidth][r]{}} \\
+           \@director \\
+           \@directortitle
+         \end{center}
+       \end{minipage}%
+       \hfill%
+       \begin{minipage}[t]{0.45\textwidth}
+         \begin{center}
+           \underline{\makebox[\textwidth][r]{}} \\
+           Date
+         \end{center}
+       \end{minipage}
+     \fi
+     \vspace*{0.5in}
+     \newpage
+   \endgroup}
+%    \end{macrocode}
+%
+% \subsubsection{Abstract and Special Abstract}
+%
+% Setting the abstract in the official thesis class
+% is tricky.  Since we have to typeset it twice, for
+% the regular and the special abstract, and we want to keep the regular
+% \LaTeX\ syntax of having an |abstract| environment, we somehow have to 
+% save the body of the abstract environment for further processing.
+% This is quite difficult to do in \TeX, but fortunately the |amsmath|
+% package has solved this problem for us.  It defines the internal macro
+% |\collect@body| which takes a single argument, namely the name of
+% a macro which does the processing.  This macro is then called by
+% |\collect@body|, and given the contents of the environment body as
+% its argument.  We redefine these macros here, mainly for the reason that
+% we want the auxiliary macros |\collect@@body|
+% and |\Addto@envbody| to be defined with
+% |\long\def|, so that the abstract can have more than one paragraph.
+% We capitalize all macros not to interfere with the |amsmath| package
+% (actually, our change would only change |amsmath|s response to
+% errors, not its behavior with correct code).
+%    \begin{macrocode}
+\long\def\Addto@envbody#1{\@envbody\@xp{\the\@envbody#1}}
+\def\Collect@body#1{%
+    \@envbody{}%
+    \def\process@envbody{%
+        \@xp#1\@xp{\the\@envbody}%
+    }%
+    \@xp\let\csname\@currenvir\endcsname\Collect@@body
+    \csname\@currenvir\endcsname
+}
+\long\def\Collect@@body#1\end#2{%
+    \def\@tempa{#2}%
+    \ifx\@tempa\@currenvir
+        \Addto@envbody{#1}%
+        \@xp\edef\csname\@currenvir\endcsname{%
+            \@nx\process@envbody\@nx\end{\@tempa}%
+            }%
+    \else
+        \Addto@envbody{#1\end{#2}}%
+    \fi
+    \csname\@currenvir\endcsname
+}
+%    \end{macrocode}
+% The details of the above are explained in |amsmath.dtx|. For us it
+% is mainly a convenience, and the remainder of the abstract
+% macro can be coded in a very elegant way.
+%    \begin{macrocode}
+\renewenvironment{abstract}{%
+  \Collect@body\@SetAbstract}{}
+%    \end{macrocode}
+% Now the macro |\@SetAbstract|, which actually does the work. First
+% we typeset the regular abstract.
+%    \begin{macrocode}
+\long\def\@SetAbstract#1{%
+  \chapter*{Abstract} 
+  #1
+  \clearpage
+%    \end{macrocode}
+% Then the special abstract. We typeset it only in the final version. Note
+% that we have to save the page counter at the beginning of the special
+% abstract, so that it doesn't interfere with the page numbering of the
+% main document.
+%    \begin{macrocode}
+  \iffinal@
+  \begingroup
+    \clearpage
+    \newcounter{s@avepageno}
+    \setcounter{s@avepageno}{\value{page}}
+    \setcounter{page}{1}
+    \thispagestyle{empty}  
+    \@notopskip
+    \begingroup
+      \centering
+      \large\textsc
+      \@title \\
+      \bigskip
+      \normalfont\normalsize
+      \@author, \@degreeabbrev \\
+      The University of Arizona, \@date \\
+    \endgroup
+    \bigskip
+    \noindent Director: \@director \par
+    \bigskip\bigskip
+    #1
+  \endgroup
+  \clearpage
+  \setcounter{page}{\value{s@avepageno}}
+  \fi}  
+%    \end{macrocode}
+% 
+%
+% \subsection{The Sectioning Commands}
+%
+% \subsubsection{Chapter Headings in the Official Format}
+%
+% The |\chapter| macro is standard code.  It calls |\@chapter| for
+% numbered chapters, and |\@chapterstar| for unnumbered ones.
+%    \begin{macrocode}
+\def\chapter{%
+  \clearpage
+  \global\@topnum\z@
+  \@afterindentfalse
+  \secdef\@chapter\@chapterstar}
+%    \end{macrocode}
+% For numbered chapters we do all the usual things:  Set the page style in
+% case it has been modified previously, increment the chapter counter, 
+% create the Table of Contents entry and add extra space into the
+% List of Figures and List of Tables.
+%    \begin{macrocode}
+\def\@chapter[#1]#2{%
+  \pagestyle{topright}
+  \refstepcounter{chapter}%
+  \typeout{\@chapapp \space \thechapter}
+  \addcontentsline{toc}{chapter}%
+    {\protect\chapterline{\@chapapp\ \thechapter}#1}
+  \addtocontents{lof}{\protect\addvspace{\medskipamount}}
+  \addtocontents{lot}{\protect\addvspace{\medskipamount}}
+%    \end{macrocode}
+% Then we typeset the chapter heading.
+%    \begin{macrocode}  
+  \begingroup
+    \@notopskip
+    \centering
+    \vspace*{0.25in}
+    \textbf{\@chapapp\ \thechapter} \\
+    \medskip
+    \Large\textsc{#2} \par
+  \endgroup
+  \vspace*{2\normalbaselineskip}
+  \@afterheading
+  \doublespaced}
+%    \end{macrocode}
+% Unnumbered chapters are more tricky.  Several explicitly format decisions
+% have to be made to typeset all the special ``chapters'' in the
+% front matter of the dissertation according to the official requirements.
+%
+% The following rules are implemented: The Dedication is typeset
+% double-spaced.  The Table of Contents, List of Figures and List of Tables
+% must be get pagestyle |continued| and be single-spaced.  In all other
+% cases pagestyle |topright| is selected.
+% Only those unnumbered chapters that
+% come after the Table of Contents will get an entry in the Table of
+% Contents.  An arbitrary unnumbered chapter that comes after the
+% Table of Contents will be double-spaced, the exception is the References,
+% which are single-spaced.   If an unnumbered chapter comes before the
+% Table of Contents, no explicit decision between single and double-spaced
+% is made.  The effect is that the Acknowledgments will be single-spaced,
+% provided they are placed in the officially required order.
+%    \begin{macrocode}
+\def\@chapterstar#1{%
+  \typeout{#1}
+  \edef\1{#1}
+  \ifx \dedicationname\1
+       \doublespaced
+  \else     
+  \ifx \contentsname\1 
+       \@specialhead\1
+       \singlespaced
+       \let\tableofcontents\relax
+  \else
+  \ifx \listfigurename\1
+       \@specialhead\1
+       \@tocentry\1
+       \singlespaced
+  \else
+  \ifx \listtablename\1
+       \@specialhead\1
+       \@tocentry\1
+       \singlespaced
+  \else
+  \pagestyle{topright}
+  \ifx \tableofcontents\relax
+       \@tocentry\1
+       \ifx \bibname\1 \singlespaced \else \doublespaced \fi
+  \fi\fi\fi\fi\fi
+%    \end{macrocode}
+% And this is the code to typeset the heading.
+%    \begin{macrocode}  
+  \begingroup
+    \@notopskip
+    \centering
+    \Large\textsc{#1} \par
+  \endgroup
+  \vspace*{2\normalbaselineskip}
+  \@afterheading}
+%    \end{macrocode}
+% The following macro creates the Table of Contents entry for unnumbered
+% chapters.
+%    \begin{macrocode}
+\def\@tocentry#1{%
+  \addcontentsline{toc}{chapter}{#1}
+  \addtocontents{lof}{\protect\addvspace{\medskipamount}}
+  \addtocontents{lof}{\protect\addvspace{\medskipamount}}}
+%    \end{macrocode}
+% And this one switches to pagestyle |continued| and defines the
+% extra part of the page heading.
+%    \begin{macrocode}
+\def\@specialhead#1{%
+  \gdef\@continued{\normalsize\scshape#1---\slshape Continued}
+  \pagestyle{continued}
+  \thispagestyle{topright}}
+%</ua-thesis>
+%    \end{macrocode}
+%
+% \subsubsection{Chapter Headings in the Un-Official Format}
+%
+% The following code for chapter headings is taken from the
+% |pcms-l| class by the AMS.  It is slightly simplified
+% because we don't have to deal with different ``lectures'' and
+% multiple authors.
+%    \begin{macrocode}
+%<*my-thesis>
+\def\chapter{\cleardoublepage \pagestyle{headings}%
+  \setcounter{section}0\relax
+  \thispagestyle{plain}%
+  \global\@topnum\z@
+  \@afterindentfalse \secdef\@chapter\@schapter}
+%
+\def\@chapter[#1]#2{\refstepcounter{chapter}%
+  \ifnum \c@secnumdepth <\z@ \let\thechapter\@empty\fi
+  \let\@secnumber\thechapter
+  \typeout{\chaptername\space\thechapter}%
+  \addcontentsline{toc}{chapter}{%
+    \protect\numberline{%
+      \ifx\thechapter\@empty\else\chaptername\ \thechapter.\fi}#1}%
+  \chaptermark{#1}%
+  \addtocontents{lof}{\protect\addvspace{10\p@}}%
+  \addtocontents{lot}{\protect\addvspace{10\p@}}%
+  \@makechapterhead{#2}\@afterheading}
+%
+\def\@schapter#1{\typeout{#1}%
+  \@ifnotempty{#1}{\addcontentsline{toc}{chapter}{#1}}%
+  \let\@secnumber\empty
+  \chaptermark{#1}%
+  \addtocontents{lof}{\protect\addvspace{10\p@}}%
+  \addtocontents{lot}{\protect\addvspace{10\p@}}%
+  \@makeschapterhead{#1}\@afterheading}
+%    \end{macrocode}
+% For typesetting the chapter head we fixed one problem with
+% |pcms-l|:  The first |\vspace| was originally achieved
+% through modifying |\topskip|.  However, for mysterious reasons,
+% the modification is reset to the default whenever floats are defined
+% on the first page of a chapter.
+%    \begin{macrocode}
+\def\@makechapterhead#1{\begingroup 
+  \vspace*{37pt}
+   \ifodd\c@page\raggedleft\else\raggedright\fi
+    \ifnum\c@secnumdepth>\m@ne
+      \leavevmode
+     {\Large\bfseries
+              \uppercase\@xp{\chaptername}\enspace
+        {\LARGE\bfseries\thechapter\par}}\skip@34\p@ 
+                \advance\skip@-\normalbaselineskip
+        \vskip\skip@ {\huge\bfseries #1\par}\fi
+ \endgroup
+  \skip@34\p@ \advance\skip@-\normalbaselineskip
+  \vskip\skip@ }
+%    \end{macrocode}
+% And the chapter head for unnumbered chapters:
+%    \begin{macrocode}
+%
+\def\@makeschapterhead#1{%
+        \vtop to 8pc{\vfill
+  \ifodd\c@page\raggedleft\else\raggedright\fi
+  {\huge\bfseries #1\par}%
+}%\endgroup
+\skip@34\p@\advance\skip@-\normalbaselineskip
+  \vskip\skip@ }
+%</my-thesis>  
+%    \end{macrocode}
+%
+% \subsubsection{Section, Subsections etc.}
+%
+% Here we follow literally the |pcms-l| settings, both for |ua-thesis| and
+% |my-thesis|.  The appearance is similar to the |report| class, but the
+% type sizes are scaled down one step, which looks less excessive.
+%    \begin{macrocode}
+%<*ua-thesis|my-thesis>
+\def\section{\@startsection{section}{1}%
+  \z@{-1\baselineskip\@plus-.75\baselineskip}{.5\baselineskip}%
+  {\large\bfseries}}
+%
+\def\subsection{\@startsection{subsection}{2}%
+  \z@{-.75\baselineskip\@plus-.5\baselineskip}{.5\baselineskip}%
+  {\normalfont\bfseries}}
+%
+\def\subsubsection{\@startsection{subsubsection}{3}%
+   \z@{.5\baselineskip\@plus.5\baselineskip}{-5\p@}%
+   {\normalfont\itshape}}
+%    \end{macrocode}
+% The same for the appearance of theorems, remarks, definitions and
+% proofs. Directly from |pcms-l|.
+%
+% Changed on 1996/12/05:
+% The following four macros are all
+% taken from the October 1996 release from |pcms-l|, because the
+% new release of |amsthm| breaks these macros.  No attempt is
+% made to be compatible with the old version.
+%    \begin{macrocode}
+\def\th@plain{%
+  \let\thm@indent\noindent
+  \thm@headfont{\bfseries}% heading font bold
+  \thm@notefont{\mdseries\upshape}
+  \thm@preskip.5\baselineskip\@plus.2\baselineskip
+                                    \@minus.2\baselineskip
+  \thm@postskip\thm@preskip
+  \itshape
+}
+\def\th@remark{%
+  \let\thm@indent\noindent
+  \thm@headfont{\bfseries}% heading font bold
+  \thm@notefont{\mdseries\upshape}%
+  \thm@preskip.5\baselineskip\@plus.2\baselineskip
+                                    \@minus.2\baselineskip
+  \thm@postskip\thm@preskip
+  \upshape
+}
+\def\th@definition{%
+  \let\thm@indent\noindent
+  \thm@headfont{\bfseries}% heading font bold
+  \thm@notefont{\mdseries\upshape}%
+  \thm@preskip.5\baselineskip\@plus.2\baselineskip
+                                    \@minus.2\baselineskip
+  \thm@postskip\thm@preskip
+  \upshape
+}
+\renewenvironment{proof}[1][\proofname]{\par \normalfont
+  \topsep6\p@\@plus6\p@ \trivlist \itemindent\z@
+  \item[\hskip\labelsep\bfseries
+    #1\@addpunct{.}]\ignorespaces
+}{%
+  \qed\endtrivlist
+}
+%</ua-thesis|my-thesis>
+%    \end{macrocode}
+%
+% 
+% \subsection{Captions, Headings etc.}
+%
+% In |ua-thesis| we redefine |\@makecaption| to change the font in captions
+% for figures and tables.
+%    \begin{macrocode}
+%<*ua-thesis>
+\long\def\@makecaption#1#2{%
+  \vskip\abovecaptionskip
+  \sbox\@tempboxa{\textsc{#1}. #2}%
+  \ifdim \wd\@tempboxa >\hsize
+    \textsc{#1}. #2\par
+  \else
+    \global \@minipagefalse
+    \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
+  \fi
+  \vskip\belowcaptionskip}
+%</ua-thesis>
+%    \end{macrocode}
+% The corresponding changes for |my-thesis|, taken from |pcms-l|.  The
+% internals work differently than with the |report| class.  Changed
+% 1997/3/8: The internal font names in the |amsthm| package have
+% changed with the October 1996 release.  Fixed the following two
+% lines. 
+%    \begin{macrocode}
+%<*my-thesis>
+\def\@captionheadfont{\bfseries}
+\def\@captionfont{\footnotesize\mdseries}
+%    \end{macrocode}
+% Added 1997/3/8: We assume that both table and figure captions are
+% placed below the body of the figure/table.  Thus we have to override
+% amsbooks explicit assumption that table captions are placed above a
+% table.  The following code is copied from |amsbook| and modified
+% accordingly.
+%    \begin{macrocode}
+\long\def\@makecaption#1#2{%
+  \setbox\@tempboxa\vbox{\color@setgroup
+    \advance\hsize-2\captionindent\noindent
+    \@captionfont\@captionheadfont#1\@xp\@ifnotempty\@xp
+        {\@cdr#2\@nil}{.\@captionfont\upshape\enspace#2}%
+    \unskip\kern-2\captionindent\par
+    \global\setbox\@ne\lastbox\color@endgroup}%
+  \ifhbox\@ne % the normal case
+    \setbox\@ne\hbox{\unhbox\@ne\unskip\unskip\unpenalty\unkern}%
+  \fi
+  \ifdim\wd\@tempboxa=\z@ % this means caption will fit on one line
+    \setbox\@ne\hbox to\columnwidth{\hss\kern-2\captionindent\box\@ne\hss}%
+  \else % tempboxa contained more than one line
+    \setbox\@ne\vbox{\unvbox\@tempboxa\parskip\z@skip
+        \noindent\unhbox\@ne\advance\hsize-2\captionindent\par}%
+\fi
+    \addvspace\abovecaptionskip
+    \moveright\captionindent\box\@ne
+\relax
+}
+%    \end{macrocode}
+% In |my-thesis| we have page headers.  Their format
+% is again directly taken from the |pcms-l| class.
+%    \begin{macrocode}
+\def\ps@plain{\ps@empty
+  \def\@oddfoot{\normalfont\footnotesize\bfseries \hfil\thepage\hfil}%
+  \let\@evenfoot\@oddfoot}
+\def\ps@headings{\ps@empty
+  \def\@evenhead{\normalfont\footnotesize\bfseries
+      \rlap{\thepage}\hfil \leftmark{}{}\hfil}%
+  \def\@oddhead{\normalfont\footnotesize\bfseries \hfil
+      \rightmark{}{}\hfil \llap{\thepage}}%
+  \let\@mkboth\markboth
+  \def\partmark{\@secmark\markboth\partrunhead\partname}%
+  \def\chaptermark{%
+    \@secmark\markboth\chapterrunhead{}}%
+  \def\sectionmark{%
+    \@secmark\markright\sectionrunhead\sectionname}%
+}
+%    \end{macrocode}
+% Added following two lines on 1996/12/05 to have the page number on the
+% second page, which is otherwise empty, appear in bold face.
+%    \begin{macrocode}
+\pagestyle{headings}
+\chaptermark{}
+\def\partrunhead#1#2#3{%
+  \@ifnotempty{#2}{{#1 #2}\@ifnotempty{#3}{. }}%
+  \def\@tempa{#3}%
+  \ifx\@empty\@tempa\else\@tempa\fi}
+\let\chapterrunhead\partrunhead
+\let\sectionrunhead\partrunhead
+%    \end{macrocode}
+% The Bibliography style from |pcms-l|, it is less crowded than the
+% original |amsbook| format.
+%    \begin{macrocode}
+\def\thebibliography#1{
+  \chapter*\bibname
+  \markboth{\bibname}{\bibname}%
+  \normalsize\labelsep .5em\relax
+  \list{\@arabic\c@enumi.}{\settowidth\labelwidth{\@biblabel{#1}}%
+  \leftmargin\labelwidth
+  \advance\leftmargin\labelsep
+        \bibsetup\relax
+        \usecounter{enumi}}\sloppy
+  \clubpenalty9999 \widowpenalty\clubpenalty  \sfcode`\.\@m}
+%    \end{macrocode}
+% And, lastly, the index macro from |pcms-l|, which I haven't
+% tested yet.  Let's hope it works.
+%    \begin{macrocode}
+\def\theindex{\cleardoublepage
+\@restonecoltrue\if@twocolumn\@restonecolfalse\fi
+\columnseprule \z@ \columnsep 35pt
+\def\indexchap{\@startsection
+                {chapter}{1}{\z@}{8pc}{34pt}%
+                {\raggedright
+                \huge\bfseries}}%
+ \twocolumn[\indexchap*{\indexname}]
+ \@mkboth{{\indexname}}{{\indexname}}%
+        \thispagestyle{plain}\let\item\@idxitem\parindent\z@
+         \footnotesize\parskip\z@ plus .3pt\relax\let\item\@idxitem}
+%</my-thesis>
+%    \end{macrocode}
+% 
+%
+% \subsection{The Table of Contents}
+%
+% Modifying the design of the Table of Contents is slightly tricky.  An
+% additional complication on our case is that the |amsbook| class which is
+% the base for |my-thesis| considerably modifies the internals of the
+% contents mechanism.  Therefore the code for the two classes is quite
+% different.
+%
+% \subsubsection{The Official Table of Contents}
+%
+% At the beginning of the Document we compute the width of the boldfaced
+% number 999 which we take as the maximum width of a page number in the
+% Table of Contents.  Note that we have to use |\AtBeginDocument| to avoid
+% typesetting anything in the preamble of the document as this will
+% potentially interfere with packages that modify fonts.
+%    \begin{macrocode}
+%<*ua-thesis>
+\newlength{\@auxlength}
+\AtBeginDocument{%
+  \settowidth{\@auxlength}{\textbf{999}}
+  \renewcommand{\@pnumwidth}{\@auxlength}}
+%    \end{macrocode}
+% We want all section numbers to end with a period, and modify the
+% definition of |\numberline| accordingly.
+%    \begin{macrocode}  
+\def\numberline#1{\hb@xt@\@tempdima{#1.\hfil}}
+%    \end{macrocode}
+% The same for chapter entries; in case the chapter heading takes more than
+% one line, we set |\hangindent| to indent the second and following lines.
+%    \begin{macrocode}
+\def\chapterline#1{%
+  \advance\hangindent\@tempdima
+  \hbox{#1.\space\space\hfil}}  
+%    \end{macrocode}
+% The macro |\l@chapter| is called to set the Table of Contents line for a
+% chapter entry.  
+%    \begin{macrocode}
+\renewcommand*\l@chapter[2]{%
+  \addpenalty{-\@highpenalty}%
+  \vskip 1.0em \@plus\p@
+  \begingroup
+    \advance\hangindent 1.5em
+    \@dottedtocline{0}{0pt}{0pt}{\scshape #1}{\bfseries #2}
+  \endgroup
+  \penalty\@highpenalty}
+%    \end{macrocode}
+% And the corresponding macros for figures and tables.
+%    \begin{macrocode}
+\renewcommand*\l@figure[2]{%
+  \@dottedtocline{1}{0pt}{30pt}{\textsc{Figure} #1}{#2}}
+\renewcommand*\l@table[2]{%
+  \@dottedtocline{1}{0pt}{30pt}{\textsc{Table} #1}{#2}}
+%</ua-thesis>
+%    \end{macrocode}
+%
+%
+% \subsubsection{My Table of Contents}
+%
+% The |amsbook| class automatically calculates the width of the section
+% numbers which go into the Table of Contents.  Therefore we must
+% manually compute the amount of indentation for subsection entries and
+% subsubsection headings.  This is done at the beginning of the document,
+% after |amsbook| has read the number widths found in the previous
+% \LaTeX\ run from the |.aux| file.
+%    \begin{macrocode}
+%<*my-thesis>
+\newlength{\@subsectionindent}
+\newlength{\@subsubsectionindent}
+\AtBeginDocument{%
+  \setlength{\@subsectionindent}{1pc}
+  \addtolength{\@subsectionindent}{\csname r@tocindent1\endcsname}
+  \setlength{\@subsubsectionindent}{\@subsectionindent}
+  \addtolength{\@subsubsectionindent}{\csname r@tocindent2\endcsname}}
+%    \end{macrocode}
+% Now we modify some other style parameters.  We want subsections, but
+% not subsubsections to into the Table of Contents.  If subsubsections
+% should appear in the Table of Contents, the command
+% |\setcounter{tocdepth}{4}| can be used in the preamble of the document.
+% We also need to make some minor spacing modifications.
+%    \begin{macrocode}
+\setcounter{tocdepth}{3}
+\renewcommand{\@pnumwidth}{2em}
+\def\numberline#1{\hbox{#1\quad}}
+%    \end{macrocode}
+% Finally we change |\l@chapter| to get a boldface font for chapter
+% entries, and redefine the subsection macros to use the indentation
+% calculated above. 
+%    \begin{macrocode}
+\renewcommand*{\l@chapter}[2]{%
+  \@tocline{0}{10pt plus4pt}{0pt}{1pc}{\bfseries}{#1}{\bfseries #2}}
+\def\l@subsection{\@tocline{2}{0pt}{\@subsectionindent}{}{}}
+\def\l@subsubsection{\@tocline{3}{0pt}{\@subsubsectionindent}{}{}}
+%    \end{macrocode}
+% We don't want a List of Figures or a List of Tables.
+%    \begin{macrocode}
+\let\listoffigures\relax
+\let\listoftables\relax
+%</my-thesis>
+%    \end{macrocode}
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/uaclasses/ua-classes.ins b/Master/texmf-dist/source/latex/uaclasses/ua-classes.ins
new file mode 100644
index 00000000000..ae76a731131
--- /dev/null
+++ b/Master/texmf-dist/source/latex/uaclasses/ua-classes.ins
@@ -0,0 +1,22 @@
+%%
+%% Installation file for UA Classes
+%%
+%% by Marcel Oliver, 1996/05/09
+%%
+\def\batchfile{ua-classes.ins}
+\input docstrip.tex
+\preamble
+\endpreamble
+\keepsilent
+
+\generateFile{ua-thesis.cls}{t}{%
+  \from{ua-classes.dtx}{ua-thesis}}
+  
+\generateFile{my-thesis.cls}{t}{%
+  \from{ua-classes.dtx}{my-thesis}}
+
+\generateFile{ua-title.sty}{t}{%
+  \from{ua-classes.dtx}{ua-title}}
+  
+\generateFile{my-title.sty}{t}{%
+  \from{ua-classes.dtx}{my-title}}
\ No newline at end of file