summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2019-06-23 21:03:20 +0000
committerKarl Berry <karl@freefriends.org>2019-06-23 21:03:20 +0000
commit0d626fef69361eb0ff9bc0bf8aecff696be3f7da (patch)
treebae4a363da27060ed2be41a67d76f82419880da4 /Master/texmf-dist/source/latex
parent2848dc4a0a5ab87e1713f6822a0f0fa6281feb81 (diff)
nicematrix (23jun19)
git-svn-id: svn://tug.org/texlive/trunk@51438 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex')
-rw-r--r--Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx478
1 files changed, 417 insertions, 61 deletions
diff --git a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
index 618964b20c9..c3aaadec488 100644
--- a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
+++ b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
@@ -15,8 +15,8 @@
%
% \fi
% \iffalse
-\def\myfileversion{2.1.5}
-\def\myfiledate{2019/05/27}
+\def\myfileversion{2.2}
+\def\myfiledate{2019/06/23}
%
%
%<*batchfile>
@@ -61,9 +61,9 @@ version 2005/12/01 or later.
\titlespacing*{\section}{0pt}{6.5ex plus 1ex minus .2ex}{4.3ex plus .2ex}
\titlespacing*{\subsection}{0pt}{4.5ex plus 1ex minus .2ex}{2ex plus .2ex}
\usepackage{multicol}
+\usepackage{arydshln}
\setlength{\columnseprule}{0.4pt}
\usepackage{colortbl}
-\usepackage{arydshln}
\usepackage{footnotehyper}
\parindent 0pt
@@ -581,6 +581,9 @@ version 2005/12/01 or later.
% \end{pmatrix}$
% \end{scope}
%
+%
+%
+%
% \section{The Tikz nodes created by nicematrix}
%
% The package \pkg{nicematrix} creates a Tikz node for each cell of the
@@ -1055,6 +1058,102 @@ version 2005/12/01 or later.
% \end{pNiceArrayC}$
%
%
+%
+% \section{The dotted lines to separate rows or columns}
+%
+%
+% In the environments of the extension \pkg{nicematrix}, it's possible to use
+% the command |\hdottedline| which is a counterpart of the classical commands
+% |\hline| and |\hdashline| (of \pkg{arydshln}).
+%
+% \medskip
+% \begin{BVerbatim}[baseline=c,boxwidth=9.5cm]
+% \begin{pNiceMatrix}
+% 1 & 2 & 3 & 4 & 5 \\
+% ~emphase#\hdottedline@
+% 6 & 7 & 8 & 9 & 10 \\
+% 11 & 12 & 13 & 14 & 15
+% \end{pNiceMatrix}
+% \end{BVerbatim}
+% $\begin{pNiceMatrix}
+% 1 & 2 & 3 & 4 & 5 \\
+% \hdottedline
+% 6 & 7 & 8 & 9 & 10 \\
+% 11 & 12 & 13 & 14 & 15
+% \end{pNiceMatrix}$
+%
+% \bigskip
+% In the environments with an explicit preamble (like |{NiceArray}|, etc.), it's
+% possible to draw a vertical dotted line with the specifier ``|:|''.
+%
+% \medskip
+% \begin{BVerbatim}[baseline=c,boxwidth=9.5cm]
+% \left(\begin{NiceArray}{CCCC~emphase#:@C}
+% 1 & 2 & 3 & 4 & 5 \\
+% 6 & 7 & 8 & 9 & 10 \\
+% 11 & 12 & 13 & 14 & 15
+% \end{NiceArray}\right)
+% \end{BVerbatim}
+% $\left(\begin{NiceArray}{CCCC:C}
+% 1 & 2 & 3 & 4 & 5 \\
+% 6 & 7 & 8 & 9 & 10 \\
+% 11 & 12 & 13 & 14 & 15
+% \end{NiceArray}\right)$
+%
+%
+% \bigskip
+% These dotted lines do \emph{not} extend in the ``first row'' and the ``last column''
+% of the environments with such features.
+%
+% \medskip
+% \begin{BVerbatim}[baseline=c,boxwidth=9.5cm]
+% $\begin{pNiceArrayRC}{CCC:C}%
+% [ code-for-first-row = \color{blue}\scriptstyle,
+% code-for-last-col = \color{blue}\scriptstyle ]
+% C_1 & C_2 & C_3 & C_4 \\
+% 1 & 2 & 3 & 4 & L_1 \\
+% 5 & 6 & 7 & 8 & L_2 \\
+% 9 & 10 & 11 & 12 & L_3 \\
+% \hdottedline
+% 13 & 14 & 15 & 16 & L_4
+% \end{pNiceArrayRC}$
+% \end{BVerbatim}
+% $\begin{pNiceArrayRC}{CCC:C}[ code-for-first-row = \color{blue}\scriptstyle,
+% code-for-last-col = \color{blue}\scriptstyle ]
+% C_1 & C_2 & C_3 & C_4 \\
+% 1 & 2 & 3 & 4 & L_1 \\
+% 5 & 6 & 7 & 8 & L_2 \\
+% 9 & 10 & 11 & 12 & L_3 \\
+% \hdottedline
+% 13 & 14 & 15 & 16 & L_4
+% \end{pNiceArrayRC}$
+%
+% \bigskip
+% It's possible to change in \pkg{nicematrix} the letter used to specify a
+% vertical dotted line with the option |letter-for-dotted-lines| available in
+% |\NiceMatrixOptions|. For example, in this document, we have loaded the
+% extension \pkg{arydshln} which uses the letter ``:'' to specify a vertical
+% dashed line. Thus, by using |letter-for-dotted-lines|, we can use the
+% vertical lines of both \pkg{arydshln} and \pkg{nicematrix}.
+%
+% \medskip
+% \begin{BVerbatim}[baseline=c,boxwidth=9.5cm]
+% \NiceMatrixOptions{letter-for-dotted-lines = V}
+% \left(\begin{NiceArray}{~emphase#C|C:CVC@}
+% 1 & 2 & 3 & 4 \\
+% 5 & 6 & 7 & 8 \\
+% 9 & 10 & 11 & 12
+% \end{NiceArray}\right)
+% \end{BVerbatim}
+% \begin{scope}
+% \NiceMatrixOptions{letter-for-dotted-lines = V}
+% $\left(\begin{NiceArray}{C|C:CVC}
+% 1 & 2 & 3 & 4 \\
+% 5 & 6 & 7 & 8 \\
+% 9 & 10 & 11 & 12
+% \end{NiceArray}\right)$
+% \end{scope}
+%
% \section{The width of the columns}
% \label{width}
%
@@ -1173,7 +1272,9 @@ version 2005/12/01 or later.
% \end{pNiceMatrix}$
% \end{NiceMatrixBlock}
%
+%
%
+%
% \section{Technical remarks}
%
% \subsection{Diagonal lines}
@@ -1316,17 +1417,21 @@ version 2005/12/01 or later.
%
% \subsection{The class option draft}
%
-% The package \pkg{nicematrix} is rather slow when drawing the dotted lines (generated by |\Cdots|, |\Ldots|, |\Ddots|,
-% etc.).\footnote{The main reason is that we want dotted lines with round dots (and not square dots) with the same
-% space on both extremities of the lines. To achieve this goal, we have to construct our own systeme of dotted
-% lines.}
+% The package \pkg{nicematrix} is rather slow when drawing the dotted lines
+% (generated by |\Cdots|, |\Ldots|, |\Ddots|, etc. but also by |\hdottedline| or
+% the specifier |:|).\footnote{The main reason is that we want dotted lines with
+% round dots (and not square dots) with the same space on both extremities of
+% the lines. To achieve this goal, we have to construct our own system of dotted
+% lines.}
%
-% That's why, when the class option |draft| is used, the dotted lines are not drawn, for a faster compilation.
+% That's why, when the class option |draft| is used, the dotted lines are not
+% drawn, for a faster compilation.
%
% \subsection{A technical problem with the argument of \textbackslash\textbackslash}
%
-% For technical, reasons, if you use the optional argument of the command |\\|, the vertical space added will also
-% be added to the ``normal'' node corresponding at the previous node.
+% For technical, reasons, if you use the optional argument of the command |\\|,
+% the vertical space added will also be added to the ``normal'' node
+% corresponding at the previous node.
%
% \medskip
% \begin{BVerbatim}[baseline=c,boxwidth=11cm]
@@ -1345,8 +1450,8 @@ version 2005/12/01 or later.
% \end{pNiceMatrix}$
%
% \bigskip
-% There are two solutions to solve this problem. The first solution is to use a TeX command to insert space between
-% the rows.
+% There are two solutions to solve this problem. The first solution is to use a
+% TeX command to insert space between the rows.
%
% \medskip
% \begin{BVerbatim}[baseline=c,boxwidth=11cm]
@@ -1390,8 +1495,8 @@ version 2005/12/01 or later.
% \subsection{Compatibility with the extension dcolumn}
%
% \label{dcolumn}
-% If we want to make \pkg{nicematrix} compatible with \pkg{dcolumn}, it's necessary to patch the commands
-% |\DC@endcentre| and |\DC@endright| as follow.
+% If we want to make \pkg{nicematrix} compatible with \pkg{dcolumn}, it's
+% necessary to patch the commands |\DC@endcentre| and |\DC@endright| as follow.
%
% \bigskip
%
@@ -1532,7 +1637,7 @@ version 2005/12/01 or later.
% \end{pNiceMatrix}$
%
% \vspace{2cm}
-% An example for the resultant of two polynoms (the dashed line has been drawn with \pkg{arydshln}):\par\nobreak
+% An example for the resultant of two polynoms:\par\nobreak
% \bigskip
% \begin{BVerbatim}
% \setlength{\extrarowheight}{1mm}
@@ -1574,7 +1679,7 @@ version 2005/12/01 or later.
% ~emphase#\begin{NiceMatrixBlock}[auto-columns-width]@
% \NiceMatrixOptions{code-for-last-col = \color{blue}\scriptstyle}
% \setlength{\extrarowheight}{1mm}
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 2&4&8&16&9&\\
% 3&9&27&81&36&\\
@@ -1591,7 +1696,7 @@ version 2005/12/01 or later.
% \NiceMatrixOptions{code-for-last-col = \color{blue}\scriptstyle}
% \setlength{\extrarowheight}{1mm}
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 2&4&8&16&9&\\
% 3&9&27&81&36&\\
@@ -1600,7 +1705,7 @@ version 2005/12/01 or later.
%
% \medskip
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 0&2&6&14&7&L_2\gets-2L_1+L_2 \\
% 0&6&24&78&33&L_3\gets-3L_1+L_3 \\
@@ -1609,7 +1714,7 @@ version 2005/12/01 or later.
%
% \medskip
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 0&1&3&7&\frac72&L_2\gets\frac12L_2\\
% 0&3&12&39&\frac{33}2&L_3\gets\frac12L_3 \\
@@ -1618,7 +1723,7 @@ version 2005/12/01 or later.
%
% \medskip
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 0&1&3&7&\frac72&\\
% 0&0&3&18&6&L_3 \gets -3L_2+L_3 \\
@@ -1627,7 +1732,7 @@ version 2005/12/01 or later.
%
% \medskip
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 0&1&3&7&\frac72&\\
% 0&0&1&6&2&L_3 \gets \frac13L_3\\
@@ -1636,7 +1741,7 @@ version 2005/12/01 or later.
%
% \medskip
%
-% \quad $\begin{pNiceArrayC}{CCCC|C}
+% \quad $\begin{pNiceArrayC}{CCCC:C}
% 1&1&1&1&1&\\
% 0&1&3&7&\frac72&\\
% 0&0&1&6&2& \\
@@ -1905,6 +2010,7 @@ version 2005/12/01 or later.
% In the following example, we use the ``large nodes'' to construct a block matrix (the dashed lines have been
% drawn with \pkg{arydshln}).
% \begin{Verbatim}
+% \NiceMatrixOptions{letter-for-dotted-lines = V}
% \left(\begin{NiceArray}{CC:CC}%
% [create-extra-nodes,
% ~emphase#code-after = { \tikz \node [fit = (1-1-large) (2-2-large), inner sep = 0 pt]@
@@ -1917,7 +2023,9 @@ version 2005/12/01 or later.
% \end{NiceArray}\right)
% \end{Verbatim}
%
-%
+%
+% \begin{scope}
+% \NiceMatrixOptions{letter-for-dotted-lines = V}
% \[D = \left(\begin{NiceArray}{CC:CC}[
% create-extra-nodes,
% code-after = { \tikz \node [fit = (1-1-large) (2-2-large), inner sep = 0 pt]
@@ -1928,8 +2036,8 @@ version 2005/12/01 or later.
% a_{31} & a_{32} & a_{33} & a_{34} \\
% a_{41} & a_{42} & a_{34} & a_{44}
% \end{NiceArray}\right)\]
+% \end{scope}
%
-%
%
%
% \section{Implementation}
@@ -2263,7 +2371,7 @@ version 2005/12/01 or later.
{ \seq_gput_left:Nn \g_@@_names_seq { #1 } }
\str_set:Nn \l_@@_name_str { #1 } ,
name .value_required:n = true ,
- code-after .tl_set:N = \l_@@_code_after_tl ,
+ code-after .tl_gset:N = \g_@@_code_after_tl ,
code-after .initial:n = \c_empty_tl ,
code-after .value_required:n = true ,
}
@@ -2367,6 +2475,12 @@ version 2005/12/01 or later.
%
% \bigskip
% \begin{macrocode}
+ letter-for-dotted-lines .tl_set:N = \l_@@_letter_for_dotted_lines_str ,
+ letter-for-dotted-lines .value_required:n = true ,
+ letter-for-dotted-lines .initial:n = \c_colon_str ,
+% \end{macrocode}
+% \bigskip
+% \begin{macrocode}
unknown .code:n = \@@_error:n { Unknown~key~for~NiceMatrixOptions } }
% \end{macrocode}
%
@@ -2385,6 +2499,7 @@ version 2005/12/01 or later.
code-for-last-col,~
exterior-arraycolsep,~
left-margin,~
+ letter-for-dotted-lines,~
nullify-dots,~
parallelize-diags,~
renew-dots,~
@@ -2657,7 +2772,7 @@ version 2005/12/01 or later.
\@@_msg_new:nn { Yet~in~NiceArray }
{
Environments~\{NiceArray\}~(or~\{NiceMatrix\},~etc.)~can't~be~
- nested.~We~can~go~on,~but,~maybe,~you~will~have~errors~or~an~incorrect~
+ nested.~You~can~go~on,~but,~maybe,~you~will~have~errors~or~an~incorrect~
result.
}
% \end{macrocode}
@@ -2712,7 +2827,78 @@ version 2005/12/01 or later.
}
% \end{macrocode}
%
-%
+% \bigskip
+% In the environment |{NiceArray}|, we will have to redefine the column types
+% |w| and |W|. These definitions are rather long because we have to construct
+% the |w|-nodes in these columns. The redefinition of these two column types are
+% very close and that's why we use a macro |\@@_renewcolumntype:nn|. The first
+% argument is the type of the column (|w| or |W|) and the second argument is a
+% code inserted at a special place and which is the only difference between the
+% two definitions.
+% \begin{macrocode}
+\cs_new_protected:Nn \@@_renewcolumntype:nn
+ {
+ \newcolumntype #1 [ 2 ]
+ {
+ > {
+ \hbox_set:Nw \l_tmpa_box
+ \@@_Cell:
+ }
+ c
+ < {
+ \@@_end_Cell:
+ \hbox_set_end:
+ #2
+ \hbox_set:Nn \l_tmpb_box
+ { \makebox [ ##2 ] [ ##1 ] { \box_use:N \l_tmpa_box } }
+ \dim_set:Nn \l_tmpa_dim { \box_dp:N \l_tmpb_box }
+ \box_move_down:nn \l_tmpa_dim
+ {
+ \vbox:n
+ { \hbox_to_wd:nn { \box_wd:N \l_tmpb_box }
+ {
+ \hfil
+ \tikz [ remember~picture , overlay ]
+ \coordinate (@@~north~east) ;
+ }
+ \hbox:n
+ {
+ \tikz [ remember~picture , overlay ]
+ \coordinate (@@~south~west) ;
+ \box_move_up:nn \l_tmpa_dim { \box_use:N \l_tmpb_box }
+ }
+ }
+ }
+% \end{macrocode}
+% The |w|-node is created using the Tikz library |fit| after construction of the
+% nodes |(@@~south~west)| and |(@@~north~east)|. It's not possible to contruct
+% by a standard |node| instruction because such a construction give a erroneous
+% result with some engines (|XeTeX|, |LuaTeX|) although the result is good with
+% |pdflatex| (why?).
+% \begin{macrocode}
+ \tikz [ remember~picture , overlay ]
+ \node
+ [
+ node~contents = { } ,
+ name = nm - \int_use:N \g_@@_env_int -
+ \int_use:N \g_@@_row_int -
+ \int_use:N \g_@@_column_int - w,
+ alias =
+ \str_if_empty:NF \l_@@_name_str
+ {
+ \l_@@_name_str -
+ \int_use:N \g_@@_row_int -
+ \int_use:N \g_@@_column_int - w
+ } ,
+ inner~sep = \c_zero_dim ,
+ fit = (@@~south~west) (@@~north~east)
+ ]
+ ;
+ }
+ }
+ }
+% \end{macrocode}
+%
% \bigskip
% First, we test if we are yet in an environment |{NiceArray}| (nested
% environments are forbidden).
@@ -2785,7 +2971,7 @@ version 2005/12/01 or later.
}
}
% \end{macrocode}
-% We don't want to patch any code and that's why some code is excuted in a
+% We don't want to patch any code and that's why some code is executed in a
% |\group_insert_after:N|. In particular, in this |\group_insert_after:N|, we
% will have to know the value of some parameters like |\l_@@_extra_nodes_bool|.
% That's why we transit via a global version for some variables.
@@ -2794,7 +2980,6 @@ version 2005/12/01 or later.
\dim_gset_eq:NN \g_@@_left_margin_dim \l_@@_left_margin_dim
\dim_gset_eq:NN \g_@@_right_margin_dim \l_@@_right_margin_dim
\dim_gset_eq:NN \g_@@_extra_right_margin_dim \l_@@_extra_right_margin_dim
- \tl_gset_eq:NN \g_@@_code_after_tl \l_@@_code_after_tl
\tl_gset_eq:NN \g_@@_name_str \l_@@_name_str
% \end{macrocode}
% The environment |{array}| uses internally the command |\ialign| and, in
@@ -2842,9 +3027,10 @@ version 2005/12/01 or later.
}
% \end{macrocode}
%
-% We nullify the definitions of the column types |w| and |W| because we want to
-% avoid a warning in the log file for a redefinition of a column type. We must
-% put |\relax| and not |\prg_do_nothing:|.
+%
+% We nullify the definitions of the column types |w| and |W| before their
+% redefinition because we want to avoid a warning in the log file for a
+% redefinition of a column type. We must put |\relax| and not |\prg_do_nothing:|.
% \begin{macrocode}
\cs_set_eq:NN \NC@find@w \relax
\cs_set_eq:NN \NC@find@W \relax
@@ -2852,33 +3038,43 @@ version 2005/12/01 or later.
%
% We redefine the column types |w| and |W| of the package \pkg{array}.
% \begin{macrocode}
- \newcolumntype w [ 2 ]
- {
- > {
- \hbox_set:Nw \l_tmpa_box
- \@@_Cell:}
- c
- < {
- \@@_end_Cell:
- \hbox_set_end:
- \makebox [ ##2 ] [ ##1 ] { \box_use:N \l_tmpa_box }
- }
- }
- \newcolumntype W [ 2 ]
- {
- > {
- \hbox_set:Nw \l_tmpa_box
- \@@_Cell:
+ \@@_renewcolumntype:nn w { }
+ \@@_renewcolumntype:nn W { \cs_set_eq:NN \hss \hfil }
+% \end{macrocode}
+%
+% \bigskip
+% By default, the letter used to specify a dotted line in the preamble of an
+% environment of \pkg{nicematrix} (for example in |{pNiceArray}|) is the letter
+% |:|. However, this letter is used by some extensions, for example
+% \pkg{arydshln}. That's why it's possible to change the letter used by
+% \pkg{nicematrix} with the option |letter-for-dotted-lines| which changes the
+% value of |\l_@@_letter_for_dotted_lines_str|.
+% \begin{macrocode}
+ \exp_args:Nx \newcolumntype \l_@@_letter_for_dotted_lines_str
+ {
+ !
+ {
+ \skip_horizontal:n { 0.53 pt }
+ \bool_gset_true:N \g_@@_extra_nodes_bool
+ \int_compare:nNnT \g_@@_row_int = 1
+ {
+ \int_compare:nNnTF \g_@@_column_int = \c_zero_dim
+ { \@@_error:n { Use~of~:~in~first~position } }
+ {
+ \tl_gput_right:Nx \g_@@_code_after_tl
+ {
+ \exp_not:N \@@_vdottedline:n
+ \exp_not:N {
+ \int_use:N \g_@@_column_int
+ \exp_not:N }
+ }
+ }
+ }
}
- c
- < {
- \@@_end_Cell:
- \hbox_set_end:
- \cs_set_eq:NN \hss \hfil
- \makebox [ ##2 ] [ ##1 ] { \box_use:N \l_tmpa_box }
- }
- }
+ }
% \end{macrocode}
+%
+%
%
% The commands |\Ldots|, |\Cdots|, etc. will be defined only in the environment
% |{NiceArray}|. If the class option |draft| is used, these commands will be
@@ -2887,6 +3083,7 @@ version 2005/12/01 or later.
\bool_if:NTF \c_@@_draft_bool
\@@_define_dots_to_nil:
\@@_define_dots:
+ \cs_set_eq:NN \hdottedline \@@_hdottedline:
\cs_set_eq:NN \Hspace \@@_Hspace:
\cs_set_eq:NN \Hdotsfor \@@_Hdotsfor
\cs_set_eq:NN \multicolumn \@@_multicolumn:nnn
@@ -3236,6 +3433,7 @@ version 2005/12/01 or later.
}
\cs_set_eq:NN \line \@@_line:nn
\g_@@_code_after_tl
+ \tl_gclear:N \g_@@_code_after_tl
\group_end:
}
% \end{macrocode}
@@ -3731,7 +3929,7 @@ version 2005/12/01 or later.
}
}
% \end{macrocode}
-% We draw only if the length is not equel to zero (in fact, in the first
+% We draw only if the length is not equal to zero (in fact, in the first
% compilation, the length may be equal to zero).
% \begin{macrocode}
\dim_compare:nNnF \l_@@_l_dim = \c_zero_dim
@@ -3757,7 +3955,8 @@ version 2005/12/01 or later.
\int_set:Nn \l_tmpa_int
{ \dim_ratio:nn { \l_@@_l_dim - 0.3 em } { 0.45 em } }
}
- { \int_set:Nn \l_tmpa_int
+ {
+ \int_set:Nn \l_tmpa_int
{ \dim_ratio:nn { \l_@@_l_dim - 0.6 em } { 0.45 em }}
}
}
@@ -4037,12 +4236,159 @@ version 2005/12/01 or later.
}
% \end{macrocode}
%
-% The commands |\Ldots|, |\Cdots|, |\Vdots|, |\Ddots|, |\Iddots| don't use this
-% command because they have to do other settings (for example, the diagonal
+% The commands |\Ldots|, |\Cdots|, |\Vdots|, |\Ddots|, and |\Iddots| don't use
+% this command because they have to do other settings (for example, the diagonal
% lines must be parallelized).
%
+% \bigskip
+% \subsection{The commands to draw dotted lines to separate columns and rows}
+%
+% The command |\hdottedline| draws a horizontal dotted line to separate two
+% rows. Similarly, the letter ``:'' in the preamble draws a vertical dotted line
+% (the letter can be changed with the option |letter-for-dotted-lines|). Both
+% mechanisms write instructions in the |code-after|. The actual instructions in
+% the |code-after| use the commands |\@@_hdottedline:n| and |\@@_vdottedline:n|.
+%
+% \bigskip
%
+% The following command must \emph{not} be protected because it starts with |\noalign|.
+% \begin{macrocode}
+\cs_new:Nn \@@_hdottedline:
+ {
+ \noalign { \skip_vertical:n { 0.53 pt } }
+ \@@_hdottedline_i:
+ }
+% \end{macrocode}
%
+% \begin{macrocode}
+\cs_new_protected:Nn \@@_hdottedline_i:
+ {
+ \int_compare:nNnTF \g_@@_row_int < 2
+ { \@@_error:n { Use~of~hdottedline~in~first~position } }
+ {
+ \bool_gset_true:N \g_@@_extra_nodes_bool
+ \bool_if:NF \c_@@_draft_bool
+ {
+ \tl_gput_right:Nx \g_@@_code_after_tl
+ {
+ \exp_not:N \@@_hdottedline:n
+ \exp_not:N {
+ \int_eval:n { \g_@@_row_int - 1 }
+ \exp_not:N }
+ }
+ }
+ }
+ }
+% \end{macrocode}
+%
+% The argument of |\@@_hdottedline:n| is the number of the row \emph{after} which
+% we have to draw a dotted line.
+% \begin{macrocode}
+\cs_new_protected:Nn \@@_hdottedline:n
+ {
+ \@@_create_extra_nodes:
+ \dim_zero_new:N \g_@@_x_initial_dim
+ \dim_zero_new:N \g_@@_y_initial_dim
+ \dim_zero_new:N \g_@@_x_final_dim
+ \dim_zero_new:N \g_@@_y_final_dim
+ \bool_set_true:N \l_@@_initial_open_bool
+ \bool_set_true:N \l_@@_final_open_bool
+ \begin { tikzpicture } [ remember~picture ]
+ \tikz@parse@node\pgfutil@firstofone
+ ( #1 - 1 -large .south~west )
+ \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
+ \tikz@parse@node\pgfutil@firstofone
+ ( #1 - \int_use:N \g_@@_column_int -large .south~east )
+ \dim_gset:Nn \g_@@_x_final_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_final_dim \pgf@y
+ \end { tikzpicture }
+ \@@_draw_tikz_line:
+ }
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@@_msg_new:nn { Use~of~hdottedline~in~first~position }
+ {
+ You~can't~use~the~command~\token_to_str:N\hdottedline\ in~the~first~row~
+ of~the~environment~\{\@currenvir\}. \\
+ If~you~go~on,~this~dotted~line~will~be~ignored.
+ }
+% \end{macrocode}
+%
+%
+% \bigskip
+% \begin{macrocode}
+\cs_new_protected:Nn \@@_vdottedline:n
+ {
+% \end{macrocode}
+% The following test is a security: normally, the error should have been capted
+% before.
+% \begin{macrocode}
+ \int_compare:nNnTF #1 = \c_zero_int
+ { \@@_error:n { Use~of~:~in~first~position } }
+ {
+ \@@_create_extra_nodes:
+ \bool_if:NF \c_@@_draft_bool
+ {
+ \dim_zero_new:N \g_@@_x_initial_dim
+ \dim_zero_new:N \g_@@_y_initial_dim
+ \dim_zero_new:N \g_@@_x_final_dim
+ \dim_zero_new:N \g_@@_y_final_dim
+ \bool_set_true:N \l_@@_initial_open_bool
+ \bool_set_true:N \l_@@_final_open_bool
+% \end{macrocode}
+% If the |w|-nodes are created in the previous column (that is if the previous
+% column was constructed explicitly of implicitly with a letter |w|), we use
+% that column in order to have the dotted lines perfectly aligned when we use
+% the environment |{NiceMatrixBlock}| with the option |auto-columns-width|.
+% \begin{macrocode}
+ \cs_if_exist:cTF
+ { pgf@sh@ns@nm -\int_use:N \g_@@_env_int - 1 - #1 - w }
+ {
+ \begin { tikzpicture } [ remember~picture ]
+ \tikz@parse@node\pgfutil@firstofone
+ ( 1 - #1 - w .north~east )
+ \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
+ \tikz@parse@node\pgfutil@firstofone
+ ( \int_use:N \g_@@_row_int - #1 - w .south~east )
+ \dim_gset:Nn \g_@@_x_final_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_final_dim \pgf@y
+ \end { tikzpicture }
+ \dim_gadd:Nn \g_@@_x_initial_dim \arraycolsep
+ \dim_gadd:Nn \g_@@_x_final_dim \arraycolsep
+ }
+ {
+ \begin { tikzpicture } [ remember~picture ]
+ \tikz@parse@node\pgfutil@firstofone
+ ( 1 - #1 - large .north~east )
+ \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
+ \tikz@parse@node\pgfutil@firstofone
+ ( \int_use:N \g_@@_row_int - #1 - large .south~east )
+ \dim_gset:Nn \g_@@_x_final_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_final_dim \pgf@y
+ \end { tikzpicture }
+ }
+ \@@_draw_tikz_line:
+ }
+ }
+ }
+% \end{macrocode}
+%
+%
+% \begin{macrocode}
+\@@_msg_new:nn { Use~of~:~in~first~position }
+ {
+ You~can't~use~the~column~specifier~"\l_@@_letter_for_dotted_lines_str"~in~the~
+ first~position~of~the~preamble~of~the~environment~\{\@currenvir\}. \\
+ If~you~go~on,~this~dotted~line~will~be~ignored.
+ }
+% \end{macrocode}
+%
+%
+%
% \subsection{The environment \{NiceMatrixBlock\}}
%
% The following flag will be raised when all the columns of the environments of
@@ -4845,6 +5191,16 @@ version 2005/12/01 or later.
%
% Option |allow-duplicate-names|.
%
+% \subsection{Changes between version 2.1.5 and 2.2}
+%
+% Possibility to draw horizontal dotted lines to separate rows with the command
+% |\hdottedline| (similar to the classical command |\hline| and the command
+% |\hdashline| of \pkg{arydshln}).
+%
+% Possibility to draw vertical dotted lines to separate columns with the
+% specifier ``|:|'' in the preamble (similar to the classical specifier
+% ``\verb+|+'' and the specifier ``|:|'' of \pkg{arydshln}).
+%
% \endinput
% Local Variables:
% TeX-fold-mode: nil