remove toptesi, size14.clo confclits

git-svn-id: svn://tug.org/texlive/trunk@3708 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 2465 deletions

diff --git a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx b/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
deleted file mode 100644
index f74b747a6fa..00000000000
--- a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
+++ /dev/null
@@ -1,2352 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright 1989--2006 Claudio Beccari
-%
-% This file is part of the TOPtesi bundle
-% -------------------------------------------
-%
-% It may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-%    http://www.latex-project.org/lppl.txt
-% and version 1.3 or later is part of all distributions of LaTeX
-% version 2003/12/01 or later.
-%
-% This file has the LPPL maintenance status "author-maintained".
-%
-% The list of all files belonging to the TOPtesi bundle is
-% given in the file `manifest.txt'.
-%
-% The list of derived (unpacked) files belonging to the distribution
-% and covered by LPPL is defined by the unpacking scripts (with
-% extension .ins) which are part of the distribution.
-%
-% \fi
-%
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-\ProvidesFile{toptesi.dtx}[2006/08/22 v.4.05 Documented TeX file for
-the TOPtesi bundle]
-\GetFileInfo{toptesi.dtx}
-\title{The TOPtesi bundle}
-\date{\fileversion\space\filedate}
- \author{Claudio Beccari}
-
-\begin{document}\errorcontextlines=9
-\maketitle
- \setlength\hfuzz{20pt}
- \DocInput{toptesi.dtx}
-\end{document}
-%</driver>
-% \fi
-%
-% \CheckSum{2833}
-%
-%% \CharacterTable
-%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%%   Digits        \0\1\2\3\4\5\6\7\8\9
-%%   Exclamation   \!     Double quote  \"     Hash (number) \#
-%%   Dollar        \$     Percent       \%     Ampersand     \&
-%%   Acute accent  \'     Left paren    \(     Right paren   \)
-%%   Asterisk      \*     Plus          \+     Comma         \,
-%%   Minus         \-     Point         \.     Solidus       \/
-%%   Colon         \:     Semicolon     \;     Less than     \<
-%%   Equals        \=     Greater than  \>     Question mark \?
-%%   Commercial at \@     Left bracket  \[     Backslash     \\
-%%   Right bracket \]     Circumflex    \^     Underscore    \_
-%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
-%%   Right brace   \}     Tilde         \~}
-%
-% \begin{abstract}
-% This file describes the TOPtesi bundle; it is a set of files designed to
-% typeset with \LaTeX\ a university final report that in Italian is generally
-% called ``tesi''; It was originally developed at the Technical University
-% of Turin (Politecnico di Torino) but it was adapted for typesetting theses in any
-% Italian university. Well\dots\ since the Erasmus student mobility is very
-% extended and many Italian students participate in the so called \textit{double degree}
-% programs; their theses, or whatever they are called in other countries,
-% may be typeset so as to comply also with the host university rules; therefore this
-% set of files has the ambition to be suited for typesetting theses in any university in the
-% world\dots
-% \end{abstract}
-%
-% \section{Introduction}
-% The TOPtesi bundle collects a certain number of files, specifically
-% \begin{itemize}
-% \item a class file \texttt{toptesi.cls} to be used as the main document class; the main
-% document may be any of a certain number of reports that in Italy
-% are called with various names: ``monografia'', ``monografia di laurea'',
-% ``tesi di laurea'', ``tesi di laurea specialistica'', ``tesi di laurea
-% magistrale'', ``tesi di dottorato'', ``dissertazione di dottorato'', and so on.
-% All these documents have in common the fact that they all conclude a period of university
-% education. Moreover since they may conclude a double degree university program, they may
-% receive foreign names such as, for example, ``Projet de fin d'\'etudes'', ``Master thesis'',
-% and the like.
-% \item An extension package \texttt{toptesi.sty} that contains most of the code
-% for the real typesetting; it might be used as an extension to the report class file,
-% although this use is discouraged.
-% \item A second extension package \texttt{topfront.sty} that contain the commands
-% and the typesetting macros for the title page; this file may be used as an
-% independent extension package to be added to, say, the report class file for typesetting
-% just the title page; this file might be used as a template for setting up the
-% title page fixed information in languages different from Italian.
-% \item A third extension package \texttt{topcomand.sty} that defines a certain number
-% of user commands suitable for typesetting technical matters.
-% \item A fourth extension package \texttt{trieste.sty} and its accompanying package option
-% \texttt{topsiz14.clo} that is used as an option by
-% \texttt{toptesi.cls} in order to define a certain number of variations required
-% for theses in humanities at the university of Trieste; these variations are not so important
-% ones, but they may be preferred also in other faculties so that the suitable option
-% comes handy also in other situations.
-% \item The logos of a certain number of Italian universities both in \texttt{.eps} and in
-% \texttt{.jpg} or \texttt{.pdf} formats; such logos are included for the user sake, but
-% the user should pay attention to use them according to the rules and limitations of
-% each university and is strongly advised to look up such regulations in each university Web
-% site.
-% \item A documentation file \texttt{toptesi-doc.pdf} written in Italian where every feature
-% is explained in detail; simpler information is given in this English documentation.
-% \end{itemize}
-%
-% The above files are complemented with a configuration file that any user may
-% personalize at will; these personalizations make it easy to configure the
-% bundle so as to make it suitable for another language; in facts the \textsf{babel}
-% package contains localizations for many languages but they refer to the standard
-% infix \LaTeX\ names and phrases and they do not cope with the thesis title page requirements.
-%
-% \section{User commands}
-% The \texttt{toptesi.cls} is basically an extension of the standard class
-% \texttt{report.cls}; It redefines the page typesetting grid, the headers and the footers,
-% and the title page layout and commands.
-% \texttt{toptesi.cls} does not set such crazy settings as ``double spaced'' text; it is
-% intended to typeset the thesis with the quality of a \LaTeX\ well typeset document, not as
-% a typewriter written one. I suppose that typewriter documents have completely vanished
-% except perhaps in the legal professions, especially in Italy where legal documents have to
-% be written on special paper produced by the State Polygraphic Institute and carrying a
-% watermark and the Republic's Seal; without a special printer it would be very difficult to
-% typeset on such a paper.
-%
-% Theses very often are full of specialized material: formulas, diagrams and pictures,
-% texts written in non latin alphabets, special symbols for philological mark-up, and the like;
-% a common typewriter would not be suitable and the quality of the contents requires professional
-% typesetting; this is why I strongly believe that instructions on typesetting styles that
-% refer to the good old times of mechanical typewriters should be banned.
-%
-% Most new commands refer themselves to the information that should be typeset in the
-% title page; some class options specify special stylistic page details; the rest is simple
-% and traditional \LaTeX\ mark-up as it is implemented in the \LaTeX\ kernel and in the
-% report document class.
-%
-% \subsection{Class options}
-% The class accepts all the options accepted by the report document class plus the ones
-% defined here:
-% \begin{description}\def\Item[#1]{\item[\texttt{#1}]}
-% \Item[chapterbib] Allows to typeset a list of references at the end
-% of each chapter and the bibliography items are numbered with a \emph{chapter.item}
-% indication.
-%
-% \Item[classica] Specifies a general modification of certain details that are
-% supposed to be  more adequate in the humanities; specifically this option
-% lets old style numbers to be used for certain numerical pieces of information;
-% some variations are also introduced in the title page.
-%
-% \Item[cucitura]  In two sided printing it is better to move the
-% typesetting grid towards the outer edges so as to cope with the thesis binding
-% that is generally not made by sawing a number of signatures; the outer displacement
-% is fixed to~7mm.
-%
-% \Item[14pt] Extends the normal size choice to 14 points; it is appreciated
-% in various fields of humanities, but I would discourage this use in a technical
-% thesis, where 10 point perhaps is too small, but 11 point or 12 point typesetting
-% may be adequate. It  is worth mentioning that this option implements the font
-% settings in e different way from what is being done with the \texttt{extsizes} bundle of
-% classes; this is why the original \texttt{size14.clo} class option file has been renamed
-% \texttt{topsiz14.clo} so as to avoid conflicts with the \texttt{size14.clo} file belonging
-% to that bundle.
-%
-% \Item[autoretitolo] This option modifies the left handed (even numbered) pages
-% in two side typesetting; normally the even numbered headings contain
-% the chapter title, while the odd numbered ones contain the current section title.
-% If the \texttt{classica} option has been specified, then with this option it is possible to
-% have even numbered % headings contain the author's name and the thesis title, while the odd
-% numbered ones contain the chapter title. Since the thesis title might be too
-% long to fit in the header together with the author's name, the |\title| macro
-% as been modified so as to accept an optional short title, similarly to the
-% sectioning commands.
-%
-% \Item[oldstyle] Also this option works only if \texttt{classica} had already been
-% specified; it typesets several numerical data with the old style numbers.
-% \end{description}
-%
-% \subsection{Title page commands}
-% The user must specify a certain number of commands in order to have the
-% title page contain all the required information. It must be specified that
-% most of these commands may be used in the configuration file so as to avoid repeating
-% the same data for different ``reports''; well, a university student might write a
-% bachelor's  ``monografia'', then a master thesis and finally a doctoral dissertation;
-% why should s/he repeat his/her name, the name of the institution, and so on?
-% all the user commands for the title page redefine default values or strings;
-% therefore if none of the required information is given, the default values and strings are
-% typeset, possibly with hilarious results\dots
-%
-% Since most users are supposed to be Italian, the user commands are mostly in Italian;
-% the following description gives their names and meanings; every command receives an argument;
-% only the command |\title| accepts an optional argument according to the usual \LaTeX\ syntax:
-% \[
-%   \makebox[0pt]{%
-%       \texttt{\char92}\emph{command}\relax
-%                   \texttt{[}\emph{opt\_arg}\texttt{]}\relax
-%                   \texttt{\char123}\emph{req\_arg}\texttt{\char125}\relax
-%               }
-% \]
-% \begin{description}
-% \def\cs#1{\texttt{\char92#1}}
-% \def\Item[#1]{\item[\normalfont\cs{#1}]}
-% \Item[frontespizio] is the actual command that typesets the title page and this command
-%                   uses all the information that is passed to it by means of the following
-%                   commands.
-% \Item[monografia]  sets the bachelor's report style and retrieves the report title
-% \Item[titolo]  gets the thesis title and an optional thesis short title
-% \Item[sottotitolo]  gets the thesis subtitle if any
-% \Item[materia]  gets the name of the subject the thesis deals with
-% \Item[Materia]  alias for \cs{materia}
-% \Item[direttore]  gets the name of the Doctoral School Director
-% \Item[coordinatore]  gets the name of the Doctoral School Coordinator
-% \Item[QualificaDirettore]  gets the phrase that describes the director or coordinator
-%                 official position; by using the command \cs{direttore} the default phrase
-%                 ``Direttore della Scuola di Dottorato'' is printed over the ``director's'' name;
-%                 if \cs{coordinatore} is used the default phrase ``Coordinatore della
-%                 Scuola di Dottorato'' is printed instead. If neither one is applicable or a
-%                 description in another language is required, this macro is available for
-%                 specifying such position.
-% \Item[relatore]  gets the name of thesis first supervisor
-% \Item[secondorelatore]  gets the name of the second supervisor
-% \Item[terzorelatore]  gets the name of the third supervisor; it is assumed that the number of supervisors
-%                 never exceeds three.
-% \Item[tutore]  gets the name of the doctorate tutor; there is no difference with regards
-%                 to the \cs{relatore}, but the default phrase ``Tutore'' is printed over this
-%                 person's name.
-% \Item[TutorName]  gets the phrase that describes the tutor position, possibly in a different
-%                 language.
-% \Item[AdvisorName] gets the string that qualifies the supervisor(s); the default string
-%                   is ``Relatore:'' or ``Relatori:'' for the plural; in another language
-%                   this command is used to define the string, say, ``Supervisors:'' if the
-%                   thesis has been supervised by more than one person.
-% \Item[CoAdvisorName] gets the string that qualifies the co-supervisor(s); the default string is
-%                 ``Correlatore:'' or ``Correlatori:'' in the plural; this command may be used to
-%                   define the string, say, ``Corapporteur:'' in a French Projet de fin
-%                   d'\'etudes.
-% \Item[candidato]  gets the name of the male student
-% \Item[candidata]  gets the name of the female student
-% \Item[secondocandidato]  gets the name of the second male student
-% \Item[secondacandidata]  gets the name of the second female student
-% \Item[terzocandidato]  gets the name of the third male student
-% \Item[terzacandidata]  gets the name of the third female student; most often the thesis
-%                 author is just one person; but there are some institutions where group
-%                 final works are accepted; it is assumed that the group does not contain more
-%                 than three authors. The specification of the gender allows the software
-%                 to determine the correct labeling phrase in the proper gender and proper number.
-%                 For different languages there might be no difference in gender but
-%                 there is a difference in the plural ending.
-% \Item[CandidateName]  gets the string that describes the student status in a foreign language
-%                 or even in Italian; the default string is ``Candidato:'' (with colons)
-%                 adjusted to masculine, or feminine, singular or plural; with the option
-%                 \texttt{classica} the string becomes ``Laureato:''; in other languages
-%                 it is necessary to specify this string in the proper gender and number
-% \Item[sedutadilaurea]  gets the date of the final exam, or presentation, or defense of the
-%                 thesis; if this date is omitted the default date is the current
-%                 month and year in Italian
-% \Item[esamedidottorato]  an alias for \cs{sedutadilaurea} to be used for doctoral dissertations
-% \Item[ciclodidottorato]  gets the roman numeral that specifies the doctoral cycle
-% \Item[CycleName]  redefines the string that expresses the name of the doctoral cycle;
-%                 by default this is ``ciclo'' but this command is useful to set the
-%                 name in a different language.
-% \Item[corsodilaurea]  gets the proper name of the degree course; the phrase that describes
-%                 the degree course is specified, if necessary, with the following
-%                 command; with this one you specify just, say, ``Electrical Engineering''
-% \Item[CorsoDiLaureaIn]  gets the generic name of the degree course, for example ``Bachelor
-%                 Degree in''
-% \Item[TesiDiLaurea]  gets the generic phrase that describes the thesis; by default it is
-%                 ``Tesi di Laurea''; in English one might set it to ``Master Thesis''.
-% \Item[NomeMonografia]  gets the phrase that describes the bachelor's report; by default
-%                 it is ``Monografia di Laurea''. In some Italian universities it might
-%                 be called ``Tesi di Laurea'', so that the master thesis should be given
-%                 another qualification, for example ``Tesi di Laurea Magistrale''.
-% \Item[NomeDissertazione]  gets the phrase that describes the doctoral thesis; by default it is
-%                 ``Tesi di Dottorato''.
-% \Item[InName]  infix strings often require adjusting of the prepositions; this macro gets
-%                 the preposition that stands for ``in'' (the default). In German it might
-%                 become ``auf''
-% \Item[NomeAnnoAccademico] defines the infix string that stands for ``Academic year''.
-%                 This macro is
-%                 defined only if the option \texttt{classica} is in force; after all
-%                 the command |\annoaccademico| is defined only with that option.
-% \Item[logosede] specifies the name of the file that contains the university logo; no  default
-%                   is defined; rather a warning message is issued if no name is given
-%                   or the file is missing, but typesetting goes on without the inclusion
-%                   of any logo.
-% \end{description}
-%
-% Since the infix strings are all memorized into control sequences and for each of them it
-% is possible to use a defining command, all strings can be modified at will, so that there
-% is no difficulty to localize the package in another language; this comes particularly handy for the
-% Erasmus students on double degree programs.
-%
-% As a final remark notice that the commands for typesetting the title page are contained in the package
-% \texttt{topfront.sty}, which can be used as an autonomous extension to the \texttt{report}
-% document class. One could easily typeset just the title page with a separate \TeX\ source file
-% so as to test the completeness of the commands and coherence of the configuration file or
-% for just printing the isolated title page.
-%
-% \subsection{Typesetting commands}
-% The bundle and the TOPtesi document class accept all \LaTeX\ commands provided by
-% the \LaTeX\ \texttt{kernel}, the \texttt{report} document class, and the \texttt{graphics}
-% extension package, besides those provided by the \texttt{babel} package.
-%
-% With this respect it must be underlined that the Italian and English languages are specified by
-% default, the Italian one being the default language. An initial specification of
-% |\selectlanguage{english}| sets the English language as default. Should a student typeset the thesis
-% in French, it would be necessary to specify the option \texttt{french} among the class options,
-% and so start the document by specifying |\selectlanguage{french}|. Nevertheless these
-% \texttt{babel} macros select the English or the French typesetting rules, but hyphenation
-% is activated only if the program format file has been generated with the pertinent languages.
-% While (American) English is the default and almost any distribution of the \TeX\ system
-% has many language defaults, it is more likely that French is preloaded while Italian is not.
-% The user should verify which are the default languages preloaded into the format file; this
-% information is written in the very first lines of any \texttt{.log} file generated by any
-% run of \LaTeX, \texttt{pdflatex} or even plain \TeX.
-%
-% Should the required languages be missing, the user is forced to read the distribution
-% instructions, so as to find out how to configure his/her system so as to consider the languages
-% s/he wants to work with, and finally s/he must recreate the format files and put them in
-% the proper places of the standard or the local folder tree. The user is invited to carefully
-% investigate on these fine points and to configure the system properly; it would be very
-% upsetting using fine software for producing a perfectly typeset thesis that, unfortunately,
-% has wrong hyphenation points!
-%
-% The TOPtesi bundle adds very little to the user commands; nevertheless the package
-% \texttt{topcomand.sty},
-% that is part of this bundle and is automatically loaded, defines some useful commands for
-% typesetting technical matters in such a way as to fulfill the ISO regulations.
-% Some of these commands are already defined in the \texttt{babel} Italian option, but if your thesis
-% is written in different languages it may happen that such commands are not available any more when
-% another language is selected.
-%
-% The following description specifies these particular commands.
-% \begin{description}
-% \def\Item[#1]{\item[\normalfont\texttt{\char92#1}]}
-% \Item[DeclareSlantedCapitalGreekLetters] does exactly what its name
-% means: it changes the definitions of the mathematical capital Geek
-% letters so that they are typeset in ``italics''; they are in effects taken from the math
-% italic alphabet, instead of the default roman one.
-% %
-% \Item[ensuremath] should be already defined in the \LaTeX\ kernel;
-% should one still be using an obsolete version, this command gets
-% available anyhow.
-% %
-% \Item[ohm] typesets an upright capital omega even if the capital Greek
-% letters are in italics; the good point is that |\ohm| can be used also
-% in text mode.
-% %
-% \Item[ped] inserts a subscript in upright type; the ISO regulations
-% require the use of italics for physical or mathematica quantities, and
-% upright type for whatever is not a variable, from the names of
-% functions (such as sin, cos, log, etc.), to the indices that contain
-% information on something that is not variable. This means that $V_i$
-% requires an italic index to imply that the object $V$ is the $i$-th in
-% a set, while, say, $V_{\mathrm{max}}$ indicates the maximum value of the
-% variable $V$. This command may be used both in math and in text mode.
-% %
-% \Item[ap] similarly |\ap| inserts an apex in upright type, both in math
-% and in text mode.
-% %
-% \Item[unit] sets the unit of measure close to the numerical measure by
-% insetting a non breakable thin space and by setting the units of
-% measure in upright type; this works both in math and text mode. Of
-% course it is necessary to input the |\unit| command without intervening
-% spaces in the source file; it's necessary to typeset, say,
-% |35\unit{km}| and to avoid to input \verb*+35 \unit{km}+. This command,
-% as it is defined, conflicts with the definition of the homonymous
-% command |\unit| as defined by the \texttt{units} package, but since
-% this latter package is necessarily input \emph{after}
-% \texttt{topcomand.sty} is read, the last definition is the one in
-% force, therefore if one wishes to use the \texttt{units} package s/he
-% should not encounter any inconsistencies.
-% %
-% \Item[micro] sets the decimal prefix $\mu$ in typesetting units of
-% measure.
-% %
-% \Item[gradi] sets the small circle that defines the sexagesimal
-% degrees; it may be used also for the celsius degrees by writing in the
-% source file, say, |35\unit{\gradi C}| in order to get
-% $35\,^\circ\mathrm{C}$.
-% %
-% \Item[gei] inserts the imaginary unit in upright type with the
-% ``spelling'' used by the technologists: ``j''. This command may be
-% redefined, of course, but this strange name is due to the fact that
-% nowadays the letter ``j'' in Italian is called with the English name
-% (much shorter than the traditional Italian name ``i~lunga'') and the
-% indicated spelling ``gei'' is the phonetic Italian rendering of the
-% English word. The imaginary unit is not a variable, it is an operator,
-% so that the ISO regulations require for this symbol an upright type.
-% %
-% \Item[eu] inserts the Euler number symbol ``e'' in upright type; since
-% this entity is not a variable, but it is a mathematical constant, the
-% ISO regulations require it to be written in upright type. The electron
-% charge $e$ is not upright because this physical ``constant'' is not
-% that constant\dots
-% %
-% \Item[listing] requires for its argument the name of a file and typesets it in verbatim mode;
-% this command is very useful for typesetting the listings of the programs that were written
-% for the thesis; for best results it is recommended that the source program has lines not
-% longer than 80 characters.
-% \end{description}
-%
-% All these commands are defined into the separate package \texttt{topcoman.sty}
-% that can be used as an independent extension package for any document class.
-%
-% \StopEventually{} ^^A qui si puo' mettere una bibliografia
-%
-% \section{Documented code}
-% \subsection{The class code}
-%
-% Here begins the usual machinery for stating the required \TeX\ format
-% and for sharing some code between the driver and the class part of the code, since they are
-% supposed to carry the same date and version number, besides the description string.
-%    \begin{macrocode}
-%<*class>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesClass{toptesi}%
-[2006/04/04 v.4.00.02 Class for typesetting university theses]
-%    \end{macrocode}
-%
-% The class itself is very simple since it requires just the \texttt{report}
-% document class and some packages with some default options. All options
-% specified for the \texttt{toptesi} class are passed on to the \texttt{report}
-% class; the latter, on turn, is called with the \texttt{a4paper} option.
-% According to the \LaTeX\ machinery of option passing the options passed on to
-% the loaded class should be appended to the existing options, so that if \texttt{letterpaper}
-% was specified in the calling statement of \texttt{toptesi}, this last option would
-% override the default \texttt{a4paper} option. The same holds true for the other package
-% options except for the encoding name used as an option for the \texttt{inputenc} package; this % simply does not work and the package is not loaded any more as it was in the previous % versions\footnote{Thanks to Enrico Gregorio who pointed out this feature.}.
-% Similarly if another language was specified in the list of  \texttt{toptesi}
-% options, this language would be appended yo the \texttt{babel} package default options
-% and would become the default language.
-%    \begin{macrocode}
-\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
-\ProcessOptions\relax
-%
-\LoadClass[a4paper]{report}
-\RequirePackage[english,italian]{babel}
-\RequirePackage{toptesi}
-%
-%</class>
-%    \end{macrocode}
-% \subsection{The \texttt{toptesi.sty} code}
-% The greatest part of the \texttt{toptesi} class code is saved into a separate file
-% partly for backward compatibility reasons (before version 3.x \texttt{toptesi} was just
-% an extension to the \texttt{report} class) and partly because it might be used as a standaolone
-% package, although, take notice, it might conflict with the \texttt{book} class code and certainly
-% it is incompatible with the \texttt{article} class. This package must contain its own \TeX\
-% format declaration and might have different version and subversion numbers compared to the
-% class file and the other invoked packages that are part of the same bundle.
-%
-%    \begin{macrocode}
-%<*topsty>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{toptesi}%
-[2006/08/22 v.4.00.03 Extension for toptesi.cls]%
-%    \end{macrocode}
-%
-% We start with defining the debugging macros; these trace commands and macros
-% and are the usual one I use for debugging. I know the \texttt{trace} package is supposed
-% to be much better, but I am used to these ones.
-%    \begin{macrocode}
-\def\TRON{\tracingcommands \tw@ \tracingmacros \tw@}
-\def\TROFF{\tracingcommands\z@ \tracingmacros \z@}
-\let\TROF\TROFF
-%    \end{macrocode}
-% Now we define the specific package macros: \texttt{classica} and \texttt{trieste}
-% are identical; \texttt{trieste} is maintained for backward compatibility.
-% The option \texttt{14pt} is for choosing a normal size of 14pt; the class option
-% file \texttt{topsiz14.clo} has a name that should not conflict with other
-% similar class option packages and is in line with the other standard \texttt{size??.clo}
-% files. \texttt{chapterbib} allows to set a list of references at the end of each chapter.
-%    \begin{macrocode}
-\newif\if@binding \@bindingfalse
-\newif\ifchapterbibliography \chapterbibliographyfalse
-\DeclareOption{cucitura}{\@bindingtrue}
-\DeclareOption{14pt}{\input{topsiz14.clo}}
-\DeclareOption{chapterbib}{\chapterbibliographytrue}
-\DeclareOption{trieste}{\AtEndOfPackage{\RequirePackage{trieste}}}
-\DeclareOption{classica}{\AtEndOfPackage{\RequirePackage{trieste}}}
-%
-\ProcessOptions\relax
-%    \end{macrocode}
-% The \texttt{graphicx} package is loaded by default; it is required for
-% inserting the university logo; if the user forgets that this package has already been loaded
-% nothing dramatic happens, because the |\usepackage| and |\RequirePackage| macros
-% perform the necessary tests in order to avoid reloading the same packages again and again.
-%    \begin{macrocode}
-\RequirePackage{graphicx}
-%    \end{macrocode}
-
-% The text height gets set so as to cope with the standard UNI A4 size; in
-% any case the typesetting grid is set to an height of 585pt and is then
-% rounded to an integer number of lines depending on the size option
-% that has been chosen. The |\topmargin|, |\headheight| and |\headsep|
-% parameters have already been set in the size class option file, so that here
-% just a small adjustment is made.
-%
-%    \begin{macrocode}
-\textheight 585pt
-\divide\textheight by \baselineskip
-\multiply\textheight by \baselineskip
-\advance\textheight by \topskip
-%    \end{macrocode}
-% For the text grid width a certain reduction is made if the extra size of 14pt is chosen.
-%    \begin{macrocode}
-\ifx\f@size\@xivpt
-    \textwidth=138mm
-\else
-    \textwidth=150mm
-\fi
-%    \end{macrocode}
-% Because of the above adjustment the right and left margins must be recomputed;
-% in any case they must be recomputed because the default positioning of the
-% text grid is centered; only if the class option \texttt{cucitura} is specified
-% (|\if@binding| in this case is true) the text grids are moved to the outside
-% in order to leave a wider inner margin. At the same time if the text grid is moved to
-% the outside, the marginal note width must be reduced accordingly.
-%    \begin{macrocode}
-\oddsidemargin=\paperwidth
-\advance\oddsidemargin -\textwidth
-\divide\oddsidemargin \tw@
-\advance\oddsidemargin -1in
-\evensidemargin=\oddsidemargin
-\marginparwidth\oddsidemargin
-\advance\marginparwidth 1in
-\advance\marginparwidth-2.5\marginparsep
-%
-\if@binding
- \typeout{Messaggio Toptesi: Ricalcolo i margini}
- \advance\oddsidemargin 7mm
- \advance\evensidemargin -7mm
- \advance\marginparwidth -7mm
- \advance\marginparwidth -7mm
-\fi
-%    \end{macrocode}
-%
-% We now establish the page style. We start by setting to ``empy'' the tokens that
-% keep the left and the right marks; we define a box so as to set the headers
-% inside this box; we redefine also the plain page styles; it is actually a leftover
-% from the previous versions when the page number was set at the foot in bold face,
-% but we leave it here without the bold face specification, so that in future versions
-% folios may be redefined in a common way with the other page styles.
-% Notice that in all page styles folios are always in the footers.
-% By defining |\lapagina| to be equivalent to |\thepage| we can later on
-% redefine |\lapagina| the way we like; we actually do so with the option
-% \texttt{classica}.
-%    \begin{macrocode}
-\def\lapagina{\thepage}
-\mark{{}{}}
-\newbox\@intesta
-%
-\def\ps@plain{\let\@mkboth\@gobbletwo
-\def\@oddfoot{\null\hfill {{\lapagina}}\hfill \null}\def\@oddhead{}
-\def\@evenhead{}\let\@evenfoot\@oddfoot}
-%    \end{macrocode}
-% Other page styles are defined in a different way according to the choice of
-% one side or two side printing. In any case the header is set without capitalization
-% as it happens in all the default document classes, and it is underlined at a fixed
-% distance from the base line. If the chapter or section heading a warning is issued
-% so as to invite the user to exploit the sectioning commands optional short argument.
-%    \begin{macrocode}
-\if@twoside
-   \def\ps@headings{\let\@mkboth\markboth%
-   \def\@oddfoot{\null\hfill {{\lapagina}} \hfill\null}
-   \let\@evenfoot\@oddfoot
-   %
-   \def\@evenhead{\setbox\@intesta\hbox{\footnotesize\slshape
-        \leftmark}%
-   \ifdim\wd\@intesta>\textwidth \headWarn{\chapter}\fi%
-   \underline{\makebox[\textwidth]{\footnotesize\slshape
-        \strut\leftmark}}}%
-   \def\@oddhead{\setbox\@intesta\hbox{\footnotesize\slshape
-        \rightmark}%
-   \ifdim\wd\@intesta>\textwidth \headWarn{\section}\fi%
-   \underline{\makebox[\textwidth]{\footnotesize\slshape
-        \strut\rightmark}}}%
-   \def\chaptermark##1{\markboth{\thechapter\ -- ##1}{}}
-   \def\sectionmark##1{\markright{\ifnum\c@secnumdepth>\z@
-   \thesection\ -- \fi ##1}}}
-\else
-   \def\ps@headings{\let\@mkboth\markboth
-   \def\@oddfoot{\null \hfill {\lapagina} \hfill \null}
-   \def\@evenfoot{}
-   \def\@oddhead{\setbox\@intesta\hbox{\footnotesize\slshape
-        \rightmark}%
-   \ifdim\wd\@intesta>\textwidth \headWarn{\chapter}\fi%
-   \underline{\makebox[\textwidth]{\footnotesize\slshape
-        \strut\rightmark}}}%
-   \def\chaptermark##1{\markright{\thechapter\ -- ##1}}}
-\fi
-%
-\def\headWarn#1{\PackageWarning{toptesi}{%
-   THE HEADING IS TOO LONG\MessageBreak
-   Use the optional argument of command \string#1\MessageBreak
-   See the LaTeX Handbook (1994) on section C.4.1\MessageBreak}}
-%    \end{macrocode}
-% The various tables of contents or figures or tables require some boolean variables to
-% be defined; in facts, although the ISO regulations require that every technical report contains
-% the list of figures and/or tables, in Italy theses rarely contain these lists; after all: is
-% a thesis a technical report? We require also some other boolean variables to handle
-% the difference between front matter and main matter; this differences are already defined
-% in the \texttt{book} document class, but not in the \texttt{report} one.
-%    \begin{macrocode}
-\newif\iffigurespage
-\newif\iftablespage
-\newif\ifnumeriromani
-\newif\iffrontmatter
-%    \end{macrocode}
-% The |\frontmatter| and |\mainmatter| commands are defined and at the beginning
-% of the document the default situation of front matter is established.
-%    \begin{macrocode}
-\def\frontmatter{\clearpage\ps@plain\pagenumbering{roman}%
-    \numeriromanitrue\frontmattertrue\@openrightfalse}
-\def\mainmatter{\if@twoside\@openrighttrue\fi
-    \clearpage\ps@headings\pagenumbering{arabic}%
-    \numeriromanifalse\frontmatterfalse}
-\AtBeginDocument{\frontmatter}
-%    \end{macrocode}
-% The main matter is automatically established with the first |\chapter| command issued by
-% the user; this means that every command that starts a section at the ``chapter'' level within
-% the front matter must be executed without an explicit call to |\chapter|.
-%
-% By default we set to false the boolean variables that control the typesetting of the
-% list of figures and the list of tables.
-%    \begin{macrocode}
-\figurespagefalse
-\tablespagefalse
-%    \end{macrocode}
-% We have to define the front matter sectioning names |\sommario| and |\ringraziamenti|
-% so as to remain in the front matter.
-%    \begin{macrocode}
-\def\sommario{%
- \iffrontmatter\else\frontmattertrue\fi
- \if@openright\cleardoublepage\else\clearpage\fi
- \global\@topnum\z@
- \@afterindentfalse
- \@schapter{\summaryname}%
- \addcontentsline{toc}{chapter}{\summaryname}%
-        }
-%
-\def\ringraziamenti{%
- \iffrontmatter\else\frontmattertrue\fi
- \if@openright\cleardoublepage\else\clearpage\fi
- \global\@topnum\z@
- \@afterindentfalse
- \@schapter{\acknowledgename}%
- \addcontentsline{toc}{chapter}{\acknowledgename}%
-        }
-%    \end{macrocode}
-% The strings |\summaryname| and |\acknowledgename| are not defined in any
-% language option to \texttt{babel}. Default definitions are given below, but the user
-% must define new names for localizing the package in a language different from
-% Italian and English.
-%
-% We have to modify the |\chapter| and |\part| commands so that as the user
-% first issues one of these commands the typesetting style is switched to the
-% one for the main matter.
-%    \begin{macrocode}
-\renewcommand\chapter{%
-  \iffrontmatter\mainmatter\fi
-  \if@openright\cleardoublepage\else\clearpage\fi
-  \thispagestyle{plain}%
-  \global\@topnum\z@
-  \@afterindentfalse
-  \secdef\@chapter\@schapter}
-%
-\renewcommand\part{%
-  \iffrontmatter\mainmatter\fi
-  \if@openright\cleardoublepage\else\clearpage\fi
-  \thispagestyle{empty}%
-  \if@twocolumn\onecolumn\@tempswatrue\else\@tempswafalse\fi
-  \null\vfil
-  \secdef\@part\@spart}
-%    \end{macrocode}
-% At the same time we have to make sure that  |\tableofcontents|,
-% |\listoftables| and |\listoffigures| do not exit from the front matter style.
-% We assume these commands are issued while in front matter, the default at the begin
-% document step, so we have to avoid to use starred or un-starred |\chapter| commands.
-%    \begin{macrocode}
-\renewcommand\tableofcontents{%
- \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
- \if@openright\cleardoublepage\else\clearpage\fi
- \global\@topnum\z@
- \@afterindentfalse
- \@schapter{\contentsname}%
- \@starttoc{toc}%
- \clearpage
- \if@restonecol\twocolumn\fi
-    }
-\renewcommand\listoffigures{%
-    \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
-    \if@openright\cleardoublepage\else\clearpage\fi
-    \global\@topnum\z@
-    \@afterindentfalse
-    \@schapter{\listfigurename}
-    \@mkboth{\listfigurename}{\listfigurename}%
-    \@starttoc{lof}%
-    \clearpage
-    \if@restonecol\twocolumn\fi
-    }
-\renewcommand\listoftables{%
-    \if@twocolumn\@restonecoltrue\onecolumn\else\@restonecolfalse\fi
-    \if@openright\cleardoublepage\else\clearpage\fi
-    \global\@topnum\z@
-    \@afterindentfalse
-    \@schapter{\listtablename}%
-    \@mkboth{\listtablename}{\listtablename}%
-    \@starttoc{lot}%
-    \clearpage
-    \if@restonecol\twocolumn\fi
-    }
-%    \end{macrocode}
-% We need to define |\indici| that typesets the table of contents and, optionally,
-% the lists of tables and/or figures while assuring that the front matter style is used for
-% typesetting.
-%    \begin{macrocode}
-\def\indici{%
- \iffrontmatter\else\frontmattertrue\fi
-        \tableofcontents
-        \iftablespage
-                {\addvspace{10pt}
-                \let\saveaddvspace=\addvspace
-                \def\addvspace##1{}
-                \listoftables
-                \let\addvspace=\saveaddvspace}
-        \fi
-        \iffigurespage
-                {\addvspace{10pt}
-                \let\saveaddvspace=\addvspace
-                \def\addvspace##1{}
-                \listoffigures
-                \let\addvspace=\saveaddvspace}
-        \fi
-}
-%    \end{macrocode}
-%
-% Command |\onecolumn| is not actually necessary; it simply overrides the possible
-% misused option \texttt{twocolumn}  in the opening document class statement;
-% no thesis should be typeset in double column.
-%    \begin{macrocode}
-\onecolumn
-%    \end{macrocode}
-%
-% Here come some declarations for vertical justification and for avoiding  an hyphenated
-% word at the bottom of a page
-%    \begin{macrocode}
-\if@twoside
-    \flushbottom
-\else
-    \ifx\@xivpt\f@size
-        \raggedbottom
-    \else
-        \flushbottom
-    \fi
-\fi
-\brokenpenalty=10000
-%    \end{macrocode}
-%
-% Here comes a questionable command and/or environment; good typesetting
-% requires the baseline skip to be proportioned to the font size, generally it is some 10--20\%
-% larger than the font size. In some reasonable instances a wider or a narrower baseline skip
-% might be required; the \LaTeX\ kernel allows to use the |\linespread| command;
-% in the previous versions of this bundle a command |\interlinea| and an environment
-% \texttt{interlinea} were defined so as to allow to set the line spread factor.
-% The experience has shown that students tend to use this command so as to typeset a poor
-% and thin thesis on more pages. Well, every instrument can be judiciously or maliciously used;
-% this is one of those double sided instruments.
-%    \begin{macrocode}
-\def\interlinea#1{\linespread{#1}\selectfont}
-\def\endinterlinea{\par}
-%    \end{macrocode}
-% But whatever might be the current line spread factor within figures and tables we reset
-% this factor to the unit value; floating bodies do not belong to this or that section
-% of text where a different spread factor might be reasonable.
-%    \begin{macrocode}
-\def \@floatboxreset {%
-        \reset@font
-        \linespread{1}%
-        \normalsize
-        \@setminipage
-}
-%    \end{macrocode}
-% Since we are at it we define the floating bodies placing parameters; not only the
-% values ``here'', ``top of the page'' and ``bottom of the page'', that we set as default ones
-% leaving to the user to explicitly specify the ``page of floats'', but also the numerical and
-% geometrical parameters that control the float placements.
-% These geometrical parameters are critical and everybody has his/her own ideas of
-% what are the best values for them. According to my experience these parameters work quite well
-% but I would not suggest them for every kind of typewritten document.
-% In particular the zero value for the text fraction appears strange, but students have
-% the tendency to create large figures (more than large tables) and these tend to clog the figure queue.
-% A 100\% space for the top of page figures and a requirement of 0\% text allows large floats
-% to exit the queue provided they do not exceed the text height.
-%    \begin{macrocode}
-\def\fps@figure{htb} \def\fps@table{htb}
-%
-\setcounter{topnumber}{2}
-\def\topfraction{1}
-\setcounter{bottomnumber}{1}
-\def\bottomfraction{.5}
-\setcounter{totalnumber}{3}
-\def\textfraction{0}
-\def\floatpagefraction{0}
-\setcounter{dbltopnumber}{2}
-\def\dbltopfraction{1}
-\def\dblfloatpagefraction{0}
-%    \end{macrocode}
-% One command that the default definition does not satisfy me very much is the caption command;
-% actually it is the internal |\@makecaption| macro that performs the job. The point is that
-% I prefer a narrower justified caption rather than a caption where the last line is just a short word
-% or the right segment of an hyphenated word. If one sets the
-% |\finalhyphendemerits| counter to an incredibly high value, one might succeed
-% in avoiding hyphenation in the last word of a caption;  but this might lead
-% to a very loose typesetting of the caption paragraph, especially
-% if the horizontal box that contains it hardly exceeds the caption width.
-% I initially set the caption width (a new length) to the overall text width diminished by 3em;
-% then if the caption text, inclusive of the caption type string and number, is shorter than
-% the text width it is typeset as centered text; if it exceeds the text width
-% it is set as a justified paragraph whose line with equals the established caption with;
-% but in any case the last line of the paragraph is measured and if it is shorter than one third
-% of the caption width, this width is shortened a little bit and the paragraph is set again
-% with this shortened caption width; in order to be sure that one iteration is
-% sufficient, the shrinking of the caption width must be computed according to
-% the number of lines the paragraph occupies.
-% In order to count the number of lines the caption paragraph occupies it is
-% necessary to recall that the first line occupies a vertical space that equals
-% |\topskip| while the other lines occupy a vertical space equal to
-% |\baselineskip|; the latter one is generally larger than |\topskip| therefore
-% the integer division of the height of the vertical box divided by the
-% |\baselineskip| is truncated to count a line less than the true value.
-% In our case if the caption does not stay in one line, its text is typeset in a
-% vertical box with a line spread of 0.95 so as to make the caption a little
-% more compact than the regular text.
-% The baseline skip is a little shorter than the regular one, but it should
-% still exceed the default |\topskip|; when we first typeset the caption in a
-% vertical box we strip off the last line
-% and we must remember the presence of this line in our arithmetics.
-% If the length of the stripped last line is longer that one third of the
-% caption width, then the vertical box is recomposed by restacking the
-% individual lines, but if this last line is shorter than one third of the
-% caption width, this width is recomputed in this way: let $N-1$ be the number
-% of lines obtained with the integer division, i.e.\ one line less than those
-% actually contained in the vertical box. Let $x$ be the initial caption
-% width and $x_2$ the last line width; let $y$ be the new caption width; then
-% the total length of the caption of width $x$ is $Nx+x_2$ and this should be
-% distributed over $N+1$ lines; if we obtained the new caption width $y$ by
-% dividing the total length by $N+1$ we should be able to typeset the whole
-% caption with all the lines of equal length. This does not actually take  place
-% because the new lines do not necessarily contain the same amount of inter word
-% space, some words might have been hyphenated in a different way, and so on.
-% Moreover we do not want a caption that barely exceeds the length of
-% |\captionwidth| to be retyped into a two line caption width is about one half
-% of the width of the other captions. Therefore we allow for some white space in
-% the last line by computing the new caption width with the following formula
-% \[ y=\frac{(N+0.5)x + x_2}{N+1} \]
-%    \begin{macrocode}
-\newdimen\captionwidth
-\long\def\@makecaption#1#2{%
-   \begingroup
-   \small \parskip\z@ \parindent\z@
-   \finalhyphendemerits 100000\relax
-   \linespread{0.95}\selectfont
-   \vskip \abovedisplayskip
-   \vskip \abovedisplayskip\captionwidth=\hsize
-   \advance\captionwidth-3em
-   \setbox0 \hbox{#1.\quad#2}%
-   \ifdim\wd0>\hsize
-      \setbox1 \vbox{\hsize=\captionwidth
-      \unhbox0\par\global\setbox2\lastbox}%
-      \setbox2\hbox{\unhbox2}%
-      \ifdim\wd2<0.333333\captionwidth
-         \count255=\ht1 \advance\count255 \dp1
-         \divide\count255\baselineskip
-         \advance\count255\@ne
-         \@tempdima=\wd2
-         \advance\@tempdima \count255\captionwidth
-         \advance\@tempdima 0.5\captionwidth
-         \advance \count255\@ne
-         \divide \@tempdima \count255
-         \captionwidth=\@tempdima
-         \setbox0 \vbox{\hsize\captionwidth
-         #1.\quad#2}
-      \else
-         \setbox2\hbox to\captionwidth{\unhbox2 \hfill}%
-         \setbox0\vbox{\unvbox1\box2}%
-      \fi
-   \fi
-   \makebox[\hsize]{\box0}%
-   \endgroup
-}
-%    \end{macrocode}
-%
-% The option \texttt{chapterbib} requires a redefinition of the \texttt{thebibliogrpahy}
-% environment in case a separate reference list is required for every chapter.
-% The point is that for this task the reference key must contain also the
-% chapter number; the rest is simply a redefinition of the environment that behaves
-% differently according to the chosen option. In any case the bibliography goes to the
-% table of contents as a unnumbered chapter or section.
-%    \begin{macrocode}
-\def\redef@bibitem{\def\@bibitem##1{\item\if@filesw
-       \immediate\write\@auxout
-       {\string\bibcite{##1}{\thechapter.\the\c@enumi}}\fi\ignorespaces}}
-%
-\def\thebibliography#1{%
- \ifchapterbibliography\section*{\bibname}\relax
-    \if@twoside\markright{\bibname}\fi
-    \addcontentsline{toc}{section}{\bibname}\relax
-    \redef@bibitem
-    \list{[\thechapter.\arabic{enumi}]}{%
-    \settowidth\labelwidth{[\thechapter.#1]}\leftmargin\labelwidth
-    \advance\leftmargin\labelsep\itemsep\z@ plus 1pt\parsep\z@
-    \usecounter{enumi}}
- \else
-    \chapter*{\bibname}\relax
-    \@mkboth{\bibname}{\bibname}\relax
-    \addcontentsline{toc}{chapter}{\bibname}\relax
-    \list{[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}%
-    \leftmargin\labelwidth
-    \advance\leftmargin\labelsep\itemsep\z@ plus 1pt\parsep\z@
-    \usecounter{enumi}}
- \fi
- \def\newblock{\hskip .11em plus .33em minus -.07em}
- \sloppy
- \sfcode`\.=1000\relax}
-
-\let\endthebibliography=\endlist
-%    \end{macrocode}
-%
-% For what regards footnotes nothing is changed except resetting the
-% line spread to one, in case the current value is different.
-%    \begin {macrocode}
-\long\def\@footnotetext#1{\insert\footins{\linespread{1}\footnotesize
-    \interlinepenalty\interfootnotelinepenalty
-    \splittopskip\footnotesep
-    \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
-    \hsize\columnwidth \@parboxrestore
-   \edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}%
-   \@makefntext{\rule{\z@}{\footnotesep}\ignorespaces#1\strut}}}
-%    \end{macrocode}
-%
-% These last heterogeneous definitions are partly important and partly residues of
-% the good old times of MS-DOS v.3 when a Ctrl-Z character would be placed at the
-% end of files. It's a long time that such version is not being used, but some
-% old time files might still be around.
-%
-% The cryptic code that redefines the comma in math mode establishes that this
-% character is a normal math character, instead of a math punctuation mark;
-% this should not be necessary with the Italian option for the \texttt{babel}
-% package and it is possible that in a future version it will be eliminated.
-%
-% |\topmargin| set to 0pt simply means that the real top margin is 25.4mm, i.e.\ one
-% inch, since the output offset is one inch by default.
-%    \begin{macrocode}
-\mathcode`\,="013B
-\catcode`\^^Z=10
-\topmargin 0pt
-%    \end{macrocode}
-%
-% The TOPtesi bundle contains two new chapter like sections activated with
-% the commands |\sommario| and |\ringraziamenti| respectively. The infix strings
-% that start these sections depend on the used language.
-%
-% Because of this it is necessary to extend the list of infix string definitions provided
-% the |\captions|$\langle$\texttt{language}$\rangle$ macros defined by the
-% language description files of \texttt{babel}; for this purpose we define a macro for
-% adding new items for these two new sectioning commands. This macro receives three arguments:
-% the first is the babel language name, the second is the string for the summary name, and finally
-% the third is the string for the acknowledgements name; everything is contained within a group
-% and only the relevant captions macro is globally redefined. The token register `0' is normally
-% for scratch usage, but the fact that its value is restored upon exiting the
-% group provides the necessary protection against an involuntary reassignment
-% to this register. At the same time if a specific language option was not
-% specified, a warning message is issued, but compilations goes on any way
-% without the sectioning string names. For being sure no other undefined error
-% messages are issued, the |\summaryname| and |\acknowledgename| are let to
-% |\empty|.
-%    \begin{macrocode}
-\let\summaryname\empty
-\let\acknowledgename\empty
-\newcommand*\ExtendCaptions[3]{{%
-\@ifundefined{captions#1}{%
-\PackageWarning{toptesi}{Language option #1 not specified\MessageBreak
-Skipping any redefinition\MessageBreak}%
-}{%
-\expandafter\let\expandafter\@tempA\csname captions#1\endcsname
- \toks0=\expandafter{\@tempA%
-    \def\summaryname{#2}%
-    \def\acknowledgename{#3}}%
- \expandafter\xdef\csname captions#1\endcsname{\the\toks0}%
- }}}%
-%    \end{macrocode}
-% For Italian and English there are no problems; we provide immediately these extensions
-% by means of the newly available macro:
-%    \begin{macrocode}
-\ExtendCaptions{italian}{Sommario}{Ringraziamenti}
-\ExtendCaptions{english}{Summary}{Acknowledgements}
-%    \end{macrocode}
-% In facts the \texttt{babel} options for Italian and English have already been loaded by
-% default; therefore both caption macros |\captionsitalian| and |\captionsenglish| are
-% already defined and can be freely extended. For any other language the corresponding
-% language option must be entered in the class opening statement, otherwise a warning
-% is issued but compilation is not stopped. Therefore if, for example, the user wants to write the
-% thesis in Spanish, the thesis main file shall start like this:
-% \begin{verbatim}
-% \documentclass[...,spanish]{toptesi}
-% \ExtendCaptions{spanish}{Resumen}{Agradecimientos}
-% ...
-% \begin{document}
-% \selectlanguahe{spanish}
-% ...
-% \end{verbatim}
-% and the rest of the thesis will be typeset correctly in Spanish. Remember
-% that Italian is the default language and nothing is necessary for setting up
-% the Italian defaults. If English is desired, then after |\begin{document}| is
-% is necessary to specify the default language; for ease of use the following
-% macros are defined so they can be used instead of the lengthy \texttt{babel}
-% command; after the beginning of the document it is then possible to specify
-% |\inglese| or |\english|, and the default language turns into English.
-% These shorthand commands can be alternated so as to switch from one language
-% to the other; nevertheless remember that there are more correct ways to
-% switch languages with the \texttt{babel} commands without changing
-% the infix strings.
-%    \begin{macrocode}
-\def\italiano{\selectlanguage{italian}}%
-\def\english{\selectlanguage{english}}%
-\let\inglese\english
-%    \end{macrocode}
-% At the beginning of the document the following commands are executed; the general macro |\italiano| sets the
-% summary and the acknowledgements names in Italian, as the default language; and the |\@chapapp|
-% macro is redefined so as to agree with the default language. If a different default language is desired,
-% we recall it again, it is necessary to do the following:
-% \begin{itemize}
-% \item specify |\english| \emph{after} the |\begin{document}| statement, if English is
-%     supposed to be the default language, or
-% \item specify the language name, other than Italian or English, among the class options; use
-%     the |\ExtendCaptions| macro for extending the list of sectioning commands infix strings as explained above;
-%     specify with |\selectlanguage| the new language as the default one \emph{after} the |\begin{document}| statement.
-% \end{itemize}
-%    \begin{macrocode}
-\AtBeginDocument{%
-    \italiano
-    \renewcommand\@chapapp{\chaptername}%
-    }
-%    \end{macrocode}
-%
-% At last the subsidiary and independent packages \texttt{topcoman} and \texttt{topfront}
-% are requested for input and file input is explicitly ended.
-%    \begin{macrocode}
-\RequirePackage{topfront}
-\RequirePackage{topcoman}
-%
-%</topsty>
-%    \end{macrocode}
-% \subsection{The package file \texttt{topfront.sty}}
-% This file is input by \texttt{toptesi}, version 4.x, but it can be used as an
-% independent extension package.
-%
-% It contains all the definition for the composition of just the title page
-% along the style requirements of \texttt{toptesi}, version 4.x.
-% It makes use of an optional configuration file where the user can define
-% a lot of default information and all the infix language dependent strings
-% that are peculiar to this title page.
-%
-% This file specifies that it requires the \LaTeXe\ format and identifies itself. Since the
-% package might be used to extend the performances of other classes, this package does not
-% specify any input encoding, assuming that the calling class already provided this information.
-%    \begin{macrocode}
-%<*topfrn>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{topfront}[2006/09/04 v.4.00.04 Title page for TOPtesi]
-%    \end{macrocode}
-%
-% The title page information depends on the type of ``thesis' that is being typeset.
-% The following commands specify the kind of information that is going to be typeset.
-% Some boolean variables are automatically set by the commands in order to change some
-% formatting depending on the kind of thesis. For languages that distinguish
-% feminine from masculine adjectives or qualifications some automatic machinery is
-% set up in order to format some infix strings in a way that copes with the singular or plural
-% forms; in particular when there is a multitude of authors (maximum three) of different gender
-% the adjectives or qualifications are set masculine plurals, while when there is just one author
-% or the authors are of the same gender the adjectives or qualifications are set according to
-% number and gender. Al this is done by setting or resetting the truth value associated to
-% the boolean variable \texttt{femminile}. The boolean variable \texttt{dottorato}
-% controls the PhD thesis format, while the other variable \texttt{laureatriennale}
-% controls the formatting of the bachelor's degree report. All other theses are treated
-% as master theses, and in all cases the appropiate infix string is typeset in the title
-% page
-%    \begin{macrocode}
-\newif\iffemminile
-\newif\ifdottorato \dottoratofalse
-\newif\iflaureatriennale \laureatriennalefalse
-%    \end{macrocode}
-%
-% The thesis title is specified by means of the following commands; |\monografia|,
-% the name of the bachelors degree final report, sets also the corresponding
-% boolean variables and redefines the command |\titolo| so as to avoid
-% duplications and inconsistencies; of course something could still be inconsistent
-% if the commands are given in the wrong order.
-%
-% |\titolo| accepts an optional argument, the ``short title'', more or less
-% as the standard sectioning commands; this is due to the fact that with the
-% class option \texttt{autoretitolo} the thesis title is written together
-% with the author's name in the even side headings; if the thesis full title
-% is too long it produces overfull headlines with ugly results; a short title
-% may solve the inconvenience. The |\sottotitolo| command is another way
-% to maintain a short title; all the supplementary title information may be
-% typeset in  the subtitle.
-%    \begin{macrocode}
-\def\monografia#1{\global\laureatriennaletrue
-      \global\dottoratofalse
-      \global\def\titolo##1{\PackageWarning{toptesi}%
-      {Il titolo e' gia' stato impostato con
-            il comando \string\monografia}}%
-      \gdef\@title{#1}}
-\let\@stitle\empty
-\newcommand*{\titolo}[2][]{{\def\@tempA{#1}%
-    \ifx\@tempA\empty\gdef\@stitle{#2}\else\gdef\@stitle{#1}\fi
-    \gdef\@title{#2}}}
-\def\sottotitolo#1{\gdef\@subtitle{#1}}
-%    \end{macrocode}
-%
-% The |\materia| or its alias |\Materia| are used to specify the
-% subject of the thesis; as a silly example a set of commands that reflect
-% this subtle difference might be the following:
-% \begin{verbatim}
-% \materia{Applied Tetratricotomy}
-% \titolo{The tetratricotomy of blond hair}
-% \sottotitolo{Accurate measurements of the four fourths
-%   of tetratricotomized blond hair}
-%\end{verbatim}
-% and the title page, for example, will contain something like this:\\[\bigskipamount]
-% \begin{minipage}{\textwidth}\centering
-% {\Large Master Thesis\\ in\\ Applied Tetratricotomy\par}\bigskip
-% {\huge The tetratricotomy of blond hair\par}\bigskip
-% {\large Accurate measurements of the four fourths\\
-%   of tetratricotomized blond hair}
-% \end{minipage}\bigskip
-%    \begin{macrocode}
-\let\@materia\empty
-\def\Materia#1{\def\@materia{#1}}\let\materia\Materia
-%    \end{macrocode}
-%
-% Things get more complicated for doctoral theses; in general there is no supervisor;
-% at most if a professor is assigned to supervise or control the doctoring's work
-% this may be called in whatever mode but here we assume his name is input
-% with the command |\tutore| even if ``tutor'' does not appear as the best choice;
-% in any case in Italian ``tutore'' does not have the same meaning as the English ``tutor''.
-% Most Doctoral Schools require in place to name the School's director or
-% coordinator. This is why this person's name can be introduced with
-% |\direttore| or |\coordinatore|; the actual label printed over this person
-% name is ``Direttore'' or ``Coordinatore'' % but it can be changed with
-% |\QualificaDirettore|.
-%    \begin{macrocode}
-\newif\ifDirettore \Direttorefalse
-\def\tutore#1{\gdef\@tutore{#1}}
-\def\direttore{\Direttoretrue\relatore}%
-\def\coordinatore{\Direttorefalse\relatore}%
-\def\QualificaDirettore#1{\gdef\@PhDdirector{#1}}
-%    \end{macrocode}
-%
-% For ``normal'' theses we may have from one to three supervisors and from
-% one to three authors; not all universities accept a multitude of supervisors
-% and/or authors of the same thesis, but some do; this is why this bundle
-% accepts up to three names for each category.
-% The |\second...| commands set the plural forms of the labels printed above
-% the name lists. For the candidates there are different commands to input
-% ladies or gentlemen names; according to the masculine (ending in `o') or feminine
-% (ending in `a') commands the appropriate truth values are assigned to the
-% boolean variable \texttt{femminile} and the labels are set accordingly.
-%
-% Notice that in the case of bachelor degree final report no supervisor name is printed
-% even if one or more supervisor names are specified. This must be kept in mind in order
-% to avoid surprises in finding missing information in the title page. Further on there
-% are suggestions for circumventing this fact.
-%    \begin{macrocode}
-\def\relatore#1{\gdef\@principaladviser{#1}}
-\def\secondorelatore#1{\gdef\@secondadviser{#1}}
-\def\terzorelatore#1{\gdef\@thirdadviser{#1}}
-\def\candidato#1{\gdef\@author{#1}\femminilefalse}
-\def\candidata#1{\gdef\@author{#1}\femminiletrue}
-\def\secondocandidato#1{\gdef\@secondauthor{#1}\femminilefalse}
-\def\secondacandidata#1{\gdef\@secondauthor{#1}}
-\def\terzocandidato#1{\gdef\@thirdauthor{#1}\femminilefalse}
-\def\terzacandidata#1{\gdef\@thirdauthor{#1}}
-%    \end{macrocode}
-%
-% The next set of macros is used to typeset the ``date'' of the
-% thesis defense or presentation or whatever is done for the final
-% exam. The macro si sort of complicated because the input format for this
-% ``date'' may vary from a single year, to a year range, to a month and year specification
-% so that different actions must be taken; if the option \texttt{classica} is in
-% force\footnote{This option cannot be active if this extension package is used to extend
-% a document class other than \texttt{toptesi}; nevertheless if the package \texttt{trieste.sty}
-% is loaded before this package, the relevant information equivalent to \texttt{classica}
-% is fully defined and this package works as it should.} then the formatting of the ``date''
-% may be still different. This command is aliased with |\esamendidottorato| which literally means
-% ``defense of the doctoral dissertation''; nevertheless both commands refer to a simple date in
-% one of those formats.
-%
-% |\getseduta| splits the date in its two components, month and year;
-% if the argument is a single string without intervening spaces, the first one is the string
-% itself and the second is empty; this emptiness may be tested and in case the date formatting
-% is modified accordingly.
-% In particular if the string is a single spaceless one, this string is
-% assigned to |\@submitdate|; otherwise a different treatment is made according to the fact that
-% \texttt{classica} is in force; if \texttt{classica} is not in force the total string,
-% including spaces is assigned to |\@submitade|. If \texttt{classica} is in force,
-% |\s@dutaTrieste| is called with the whole string. On turn |\s@dutaTrieste| verifies
-% if the date should be typeset with old style numbers or in the usual way; in the latter case
-% the whole string is assigned to |\@submitdate|; in the former one the year part may be a
-% single year or a year range; This separation is tested by splitting the year part across
-% one dash; If the dash is present the extremes of the year range are assigned to |\1| and |\2|,
-% otherwise the year part is a single year;. If a single year is given this is simply typeset
-% with old style numbers and the appropriate commands are assigned to the |\@submitdate|
-% control sequence.. If a year range is given, this year range is also typeset with old style
-% numbers, and the dash is executed with a regular en-dash surrounded with white space.
-%
-%    \begin{macrocode}
-\def\sedutadilaurea#1{\getseduta#1 !}
-\def\getseduta#1 #2!{%
-    \def\@tempA{#2}%
-    \ifx\@tempA\empty
-        \def\@submitdate{#1}%
-    \else
-        \expandafter
-        \ifx\csname StileTrieste\endcsname\relax
-            \def\@submitdate{#1 #2}%
-        \else
-            \s@dutaTrieste#1 #2!%
-        \fi
-    \fi
-}%
-\def\s@dutaTrieste#1 #2!{%
-    \if@ldstyle
-        \s@paranumeri#2-!%
-        \ifx\2\empty
-            \edef\@submitdate{\noexpand#1 \noexpand\oldstylenums{#2}}%
-        \else
-            \s@paranumeri#2!%
-            \edef\@submitdate{\noexpand#1
-            \noexpand\oldstylenums{\1} -- \noexpand\oldstylenums{\2}}%
-        \fi
-        \let\1\undefined
-        \let\2\undefined
-    \else
-        \def\@submitdate{#1 #2}%
-    \fi
-}
-\def\s@paranumeri#1-#2!{\def\1{#1}\def\2{#2}}%
-\let\esamedidottorato\sedutadilaurea
-%    \end{macrocode}
-%
-% The next macros are used to assign strings to some literal information
-% to be typeset in the title page. |\ciclodidottorato| requires an uppercase roman numeral
-% (in Italy), but it can accept anything that can precede the infix word ``cycle''.
-% Macros |\corsodilaurea| and |\corsodidottorato| specify the degree course qualification;
-% You would specify just ``Elettronica'', for example, and the package will
-% write in the title page ``Corso di Laurea in Elettronica''. The infix part may be changed
-% depending on the default language and the configuration file.
-%
-% |\scuoladidottorato| gets the name of the PhD School; |\ateneo| gets the the generic name
-% of the university; |\nomeateneo| gets the proper name of the university. In Italy Universities
-% are generally named after the city they are in; in large cities where there are several
-% universities, each one of them has a proper name. For example the generic name might be
-% ``Universit\`a di Roma'' and the proper name might be ``La Sapienza''.
-% |\facolta| receives an optional argument that is the uppercase roman numeral
-% specific of the faculty and a compulsory argument that corresponds to the
-% type of faculty; for example,
-% with |\facolta[II]{Ingegneria}| the package typesets in the title page
-% ``II Facolt\`a di Ingengeria''; if the optional argument is not specified non
-% roman numeral is typeset; the infix string \verb*+Facolt\`a di + may be
-% changed with the configuration file depending on the default language.
-% Finally |\logosede| gets the name of the graphic file that contains
-% the information relative to the university logo. If such logo is not
-% available, the user does not specify this command; if the user uses this
-% command to insert the university logo but the file is not available the usual
-% \texttt{graphicx} package warning is issued but compilation goes on
-% without the logo.
-% The |\tutoreaziendale| macro is the last addition; several students who work
-% on their thesis or final project in a company want to have the company
-% supervisor name printed in the
-% title page; this does not preclude expressing the student's deepest thanks in
-% the acknowledgements
-% section, but it does not harm ro name this person also in the title page.
-%    \begin{macrocode}
-\def\ciclodidottorato#1{\gdef\@ciclo{#1 \@cyclename}}%
-\def\corsodilaurea#1{\global\dottoratofalse\gdef\@corso{#1}}
-\def\corsodidottorato#1{\global\dottoratotrue\global\laureatriennalefalse
-    \gdef\@corso{#1}}
-\def\scuoladidottorato#1{\global\dottoratotrue\global\laureatriennalefalse
-    \gdef\@phdschool{#1}}
-\def\ateneo#1{\gdef\@ateneo{\expandafter\uppercase{\expandafter #1}}}
-\def\nomeateneo#1{\gdef\@nomeat{\expandafter\uppercase{\expandafter #1}}}
-\newcommand\facolta[2][]{\gdef\@facname{#2}\gdef\@facnumber{#1}}
-\def\logosede#1{\edef\@logosede{\noexpand\includegraphics[width=3cm]{#1}}}
-\def\tutoreaziendale#1{\gdef\@tutoreaziendale{#1}}
-%    \end{macrocode}
-%
-% The following commands are user commands that modify the infix strings
-% according to the language used and to the specifications of the actual
-% university. All these commands can be put in the configuration file so as to
-% specify what is desired as a default.
-% If these commands are specifically used to redefine something before issuing
-% the |\frontespizio| command, the command that actually typesets the title
-% page, the new definitions override the configuration ones.
-%
-% \begin{description}
-% \def\Item[#1]{\item[\normalfont\texttt{\char92#1}]
-% sets or changes the string}
-% \Item[FacoltaDi] ``Facolt\`a di'' in, say, ``Faculty of''
-% \Item[DottoratoIn] ``Dottorato in'' in, say, ``PhD in''
-% \Item[CorsoDiLaureaIn] ``Corso di Laurea in'' in, say, ``Master of Science in''
-% \Item[TesiDiLaurea] ``Tesi di Laurea'' in, say, ``Tesi di Laurea Magistrale''
-% \Item[NomeMonografia] ``Monografia di Laurea'' in, say, ``Tesi di Laurea''
-% \Item[NomeDissertazione] ``Dissertazione'' in, say, ``PhD dissertation''
-% \Item[InName] ``in'' in, say, ``auf''
-% \Item[CandidateName] ``Candidato'' in, say, ``Laureando''
-% \Item[AdvisorName] ``Relatore'' in, say, ``Supervisors''
-% \Item[CoAdvisorName] ``Correlatore'' in, say, ``Corapporteur''
-% \Item[NomeTutoreAziendale] ``Supervisore aziendale'' in, say, ``XYZ Company Supervisor''
-% \Item[TutorName] ``Tutore'' in, say, ``Supervisor''
-% \Item[CycleName] ``ciclo'' in, say, ``cycle''
-% \Item[NomePrimoTomo] ``Tomo primo'' in, say, ``First volume''
-% \Item[NomeSecondoTomo] ``Tomo secondo'' in, say, ``Second volume''
-% \item[NomeTerzoTomo] ``Tomo terzo'' in, say, ``Third volume''
-% \item[NomeQuartoTomo] ``Tomo quarto'' in, say, ``Fourth volume''
-% \end{description}
-% In the above description the first string is generally the default one, while the
-% second string is just an example of the corresponding string to be set in another language
-% or to be changed in Italian. The last four commands clearly show the difficulty of
-% localizing language strings: it is necessary to localize the whole phrase, because of
-% the position of the adjectives.
-%    \begin{macrocode}
-\newcommand\FacoltaDi[1]{\gdef\@faculty{#1}}
-\newcommand\DottoratoIn[1]{\gdef\@PhDname{#1}}
-\newcommand\CorsoDiLaureaIn[1]{\gdef\@laureaname{#1}}
-\newcommand\TesiDiLaurea[1]{\gdef\@TesiDiLaurea{#1}}
-\newcommand\NomeMonografia[1]{\gdef\@monografia{#1}}
-\newcommand\NomeDissertazione[1]{\gdef\@dissertazione{#1}}
-\newcommand\InName[1]{\gdef\@InName{#1}}
-\newcommand\CandidateName[1]{\gdef\@nomecandidato{#1}}
-\newcommand\AdvisorName[1]{\gdef\Relatore{#1}\gdef\Relatori{#1}}
-\newcommand\CoAdvisorName[1]{\gdef\Correlatore{#1}\gdef\Correlatori{#1}}
-\newcommand\TutorName[1]{\gdef\Tutore{#1}}
-\newcommand\NomeTutoreAziendale[1]{\gdef\@tutoreaziendalename{#1}}
-\newcommand\CycleName[1]{\gdef\@cyclename{#1}}
-\newcommand\NomePrimoTomo[1]{\gdef\PrimoTomo{#1}}
-\newcommand\NomeSecondoTomo[1]{\gdef\SecondoTomo{#1}}
-\newcommand\NomeTerzoTomo[1]{\gdef\TerzoTomo{#1}}
-\newcommand\NomeQuartoTomo[1]{\gdef\QuartoTomo{#1}}
-%    \end{macrocode}
-%
-% Now we can read the configuration file if it exists; in any case what is possibly
-% defined or redefined in the configuration file must not be redefined in the following
-% Lines and this is why everything is subject to the test |\@ifundefined|. Most default
-% definitions are simply ``blank''; the others are in Italian. All of them, except the
-% supervisor and candidate strings may be individually be redefined in the configuration file
-% or in the preamble. Those that cannot be redefined such as the four ``candidate'' strings
-% may be actually redefined through the only |\CandidateName| that should be used in a language depended
-% way and with the correct number and gender once for all. The four endings in the Italian
-% strings allow to exercise the correct selection only for Italian; a specific test is made
-% inside the |\frontespizio| command; because of this the same machinery cannot be used, say, for French
-% but may be in the future this feature is resolved in a proper way. The same is true for the supervisor
-% and the co-supervisor strings that may be changed once for all with |\AdvisorName| and |\CoAdvisorName|.
-%    \begin{macrocode}
-\IfFileExists{toptesi.cfg}{\input{toptesi.cfg}}{}
-%
-\@ifundefined{@cyclename}{\def\@cyclename{ciclo}}{}
-\@ifundefined{@title}{\def\@title{}}{}
-\@ifundefined{@author}{\def\@author{}}{}
-\@ifundefined{@principaladviser}{\def\@principaladviser{}}{}
-\@ifundefined{@secondadviser}{\def\@secondadviser{}}{}
-\@ifundefined{@thirdadviser}{\def\@thirdadviser{}}{}
-\@ifundefined{@PhDdirector}{%
-    \edef\@PhDdirector{\ifDirettore Direttore \else Coordinatore \fi
-    del corso di dottorato}}{}
-\@ifundefined{@tutore}{\def\@tutore{}}{}
-\@ifundefined{@secondauthor}{\def\@secondauthor{}}{}
-\@ifundefined{@thirdauthor}{\def\@thirdauthor{}}{}
-%
-\@ifundefined{@nomerelatore}{\def\@nomerelatore{}}{}
-\@ifundefined{@nomecandidato}{\def\@nomecandidato{}}{}
-\@ifundefined{Candidato}{\def\Candidato{Candidato}}{}
-\@ifundefined{Candidata}{\def\Candidata{Candidata}}{}
-\@ifundefined{Candidati}{\def\Candidati{Candidati}}{}
-\@ifundefined{Candidate}{\def\Candidate{Candidate}}{}
-\@ifundefined{Relatore}{\def\Relatore{Relatore}}{}
-\@ifundefined{Relatori}{\def\Relatori{Relatori}}{}
-\@ifundefined{Correlatore}{\def\Correlatore{Correlatore}}{}
-\@ifundefined{Correlatori}{\def\Correlatori{Correlatori}}{}
-\@ifundefined{Tutore}{\def\Tutore{Tutore}}{}
-\@ifundefined{@tutoreaziendale}{\def\@tutoreaziendale{}}{}
-\@ifundefined{@tutoreaziendalename}%
-        {\def\@tutoreaziendalename{Supervisore Aziendale}}{}
-\@ifundefined{@subtitle}{\def\@subtitle{}}{}
-%
-\@ifundefined{@corso}{\def\@corso{}}{}
-\@ifundefined{@ciclo}{\def\@ciclo{}}{}
-\@ifundefined{@ateneo}{\def\@ateneo{POLITECNICO DI TORINO}}{}
-\@ifundefined{@nomeat}{\def\@nomeat{}}{}% Nome proprio dell'ateneo
-\@ifundefined{@facolta}{\def\@facname{Ingegneria}}{}
-\@ifundefined{@facnumber}{\def\@facnumber{}}{}
-\@ifundefined{@faculty}{\def\@faculty{Facolt\`a di}}{}
-%
-\@ifundefined{PrimoTomo}{\def\PrimoTomo{Tomo primo}}{}
-\@ifundefined{SecondoTomo}{\def\SecondoTomo{Tomo secondo}}{}
-\@ifundefined{TerzoTomo}{\def\TerzoTomo{Tomo terzo}}{}
-\@ifundefined{QuartoTomo}{\def\QuartoTomo{Tomo quarto}}{}
-%    \end{macrocode}
-% If the final exam date is not given the default value is the current month
-% and the current year typeset in Italian; therefore the user is strongly
-% requested to enter a date either with the |\sedutadilaurea| or the
-% |\esamedidottorato| commands. The university logo command by default is also empty.
-%    \begin{macrocode}
-\@ifundefined{@submitdate}{\def\@submitdate{\ifcase\the\month\or%
-  Gennaio\or Febbraio\or Marzo\or Aprile\or Maggio\or Giugno\or
-  Luglio\or Agosto\or Settembre\or Ottobre\or Novembre\or Dicembre\fi
-  \space \the\year}}{}
-\@ifundefined{@logosede}{\let\@logosede\relax}{}
-%
-\@ifundefined{@TesiDiLaurea}{\def\@TesiDiLaurea{Tesi di Laurea}}{}
-\@ifundefined{@phdschool}{\def\@phdschool{SCUOLA DI DOTTORATO}}{}
-\@ifundefined{@PhDname}{\def\@PhDname{Dottorato in}}{}
-\@ifundefined{@laureaname}{\def\@laureaname{Corso di Laurea in }}{}
-\@ifundefined{@dissertazione}{\def\@dissertazione{Tesi di Dottorato}}{}
-\@ifundefined{@monografia}{\def\@monografia{Monografia di Laurea}}{}
-\@ifundefined{@InName}{\def\@InName{in}}{}
-%    \end{macrocode}
-%
-% Finally it comes the only active macro |\frontespizio|, the one macro that
-% actually typesets the title page. The macro starts with a local redefinition
-% of the \texttt{myheadings} page style; with this style the university name
-% goes into the header, while the exam date goes in the footer; in this way the
-% information that must be typeset in the title page is not crunched in too
-% little space and the overall text bounding box assumes a shape similar to that
-% of the page.
-%
-% Everything is closed within a group so all definitions remain local.
-%    \begin{macrocode}
-\def\frontespizio{%
-\begingroup
-      \def\ps@myheadings{\let\@mkboth\markboth
-      \def\@oddhead{\vbox{%
-      \hbox to \hsize{\hfill {\LARGE \@ateneo}\hfill}%
-      \expandafter
-      \ifx\csname StileTrieste\endcsname\relax
-      \else
-            \hbox to \hsize{\hfil\vrule\@width\z@
-        \@height3.5ex\vrule\@height1.4\p@\@depth-\p@\@width50mm\hfil}%
-      \fi
-      }}%
-      \def\@oddfoot{\vbox to 15mm{\vss
-      \expandafter
-      \ifx\csname StileTrieste\endcsname\relax
-      \else
-            \hbox to \hsize{\hfil\raisebox{-.3ex}[\z@][\z@]{%
-        \vrule\@height-2.6\p@\@depth3\p@\@width50mm}\hfil}%
-      \fi
-      \hbox to\hsize{\hfill{\Large{\@submitdate}}\hfill}}%
-      }%
-      \let\@evenhead\@oddhead
-      \let\@evenfoot\@oddfoot
-      }%
-%    \end{macrocode}
-%
-% We want also the title page to be set in the middle of the page irrespective of
-% the binding correction; so we assign the average of the two side margins to each margin.
-%    \begin{macrocode}
-      \advance\oddsidemargin \evensidemargin
-      \divide\oddsidemargin \tw@
-      \evensidemargin \oddsidemargin
-%    \end{macrocode}
-%
-% We select the \texttt{myheadings} page style; setting the page counter to zero
-% is a remain of old settings, but it does not hurt; the |\null| command inserts a void horizontal box
-% into the vertical list; it is useful to act as a block against which the vertical glue pushes
-% for setting the subsequent material. The normal font is chosen in case preceding commands did change
-% the font characteristics.
-%    \begin{macrocode}
-      \thispagestyle{myheadings}%
-      \null\setcounter{page}{1}%
-      \normalfont
-%    \end{macrocode}
-% The generic university name is already in the header; if it is non blank the first thing
-% we set in the page is the university proper name and some vertical glue.
-%    \begin{macrocode}
-      \ifx\@nomeat\empty \else
-            {\vspace*{-3\topskip}\centering
-                \expandafter{\Large \@nomeat}\par}\vfill
-      \fi
-%    \end{macrocode}
-% Then the faculty name comes next; but fot the doctoral school it uses the doctoral
-% school name entered with |\scuoladidottorato|, otherwise it inserts the faculty
-% ordinal number or prefix and name already entered with the optional and required
-% arguments of |\facolta|.
-%    \begin{macrocode}
-      \begin{center}
-      {\rmfamily\mdseries
-      \ifdottorato
-            \large \@phdschool
-      \else
-            \LARGE\ifx\@facnumber\empty\else\@facnumber\space\fi
-            \@faculty\space\expandafter{\@facname}%
-      \fi
-      \par}%
-%    \end{macrocode}
-% Further specification: it inserts the field of the PhD research or the degree course name; for example
-% it inserts the line ``Philosophy Degree in Applied Tetratricotomy~--~XVI~cycle'' or
-% ``Master of Science in Applied Tetratricotomy''.
-%    \begin{macrocode}
-      \ifx\@corso\empty \else{\large
-            \ifdottorato
-                  {\@PhDname\@corso\ifx\@ciclo\empty\else~--~\@ciclo\fi}%
-            \else
-                  {\@laureaname\@corso}%
-            \fi
-            \par}
-      \fi
-      \end{center}
-%    \end{macrocode}
-% It now centers the name of the report, be it ``Doctoral Dissertation'' or ``Master Thesis'' or whatever; in case
-% the command |\materia| was used, it then centers the area which the thesis deals with.
-%    \begin{macrocode}
-      \vfill
-      \begin{center}
-        \LARGE
-        \ifdottorato
-            \@dissertazione%
-        \else
-            \iflaureatriennale
-                  \@monografia%
-            \else
-                  \@TesiDiLaurea%
-            \fi
-        \fi
-        \ifx\empty\@materia\else
-            \\\@InName\\\@materia
-        \fi
-      \end{center}
-%    \end{macrocode}
-% Next comes the real title entered with |\titolo| or |\monografia| and the possible subtitle.
-%    \begin{macrocode}
-      \vfill
-      \begin{center}
-        {\huge\bfseries \baselineskip=0.95em plus 1pt
-                \expandafter{\@title \par}}
-      \end{center}
-% con l'eventuale sottotitolo
-      \ifx\@subtitle\empty \else
-            \begin{center}%
-              \large\textrm{\expandafter{\@subtitle}}\par
-            \end{center}%
-      \fi
-%    \end{macrocode}
-% If the option \texttt{classica} is in force the thesis might be divided in several volumes;
-% apparently these in humanities are often oversized. In this case the |\frontespizio|
-% command may be given at the beginning of every volume and the counter \texttt{tomo} is
-% stepped up; the volume number is therefore printed in each title page; the infix string
-% may be redefined as it was shown above.
-%    \begin{macrocode}
-      \expandafter
-      \ifx\csname StileTrieste\endcsname\relax
-      \else
-            \expandafter
-            \ifnum\value{tomo}>\z@
-                  \par\bigskip
-                  \noindent\makebox[\textwidth]{%
-                  \large\textbf{%
-                  \ifcase\c@tomo%
-                        \or \PrimoTomo%
-                        \or \SecondoTomo%
-                        \or \TerzoTomo%
-                        \or \QuartoTomo%
-                        \else
-                            \PackageWarning{toptesi}{%
-                            Counter tomo equals \the\c@tomo\MessageBreak
-                            It was not considered a thesis might get
-                            divided in more than four volumes}%
-                        \fi}}%
-            \fi
-      \fi
-      \par
-%    \end{macrocode}
-% Going down in the title page now comes the optional insertion of the university logo; this is a simple task
-% once |\@logosede| has been defined, and this was done either with an explicit command |\logosede| with its argument
-% in the preamble, or a specific line in the configuration file.
-%    \begin{macrocode}
-      \ifx\@logosede\@empty\else
-      \vspace*{\bigskipamount}
-      {\centering \@logosede\par}\fi
-%    \end{macrocode}
-%
-% the final task is to typeset the possible supervisors' names, the candidates' names and all the rest
-% of the bureaucratical terms. We have to distinguish between a bachelor degree report that is not
-% supposed to have a supervisor, from the doctoral dissertation where we do not indicate the supervisor, but
-% the School Director, and the master thesis where there might be one or more supervisors; with the
-% \texttt{classica} option in force no label is printed over the supervisor's name, unless there is
-% a plurality od supervisors.
-%    \begin{macrocode}
-      \vfill
-      \iflaureatriennale
-            \let\@nomerelatore\empty
-      \else
-            \ifdottorato
-                  \edef\@nomerelatore{\@PhDdirector}%
-            \else
-                  \ifx\@principaladviser\empty\else
-                        \def\@nomerelatore{\Relatore:}%
-                  \fi
-                  \@ifundefined{StileTrieste}%
-                        {\ifx\@secondadviser\empty \else
-                              \def\@nomerelatore{\Relatori:}%
-                        \fi}{}%
-            \fi
-      \fi
-%    \end{macrocode}
-% Similarly the label names for the exam candidates are chosen; in Italian the names are infix strings
-% that are selected according the gender and the number; if these labels have to be set in a different language
-% it is necessary to define one string that has to be selected by the user according to number and gender.
-% The label for the doctorship is left empty.
-%    \begin{macrocode}
-      \ifdottorato
-            \let\@nomecandidato\empty
-      \else
-    \iflanguage{italian}{%
-            \iffemminile
-                  \def\@nomecandidato{\Candidata:}%
-            \else
-                  \def\@nomecandidato{\Candidato:}%
-            \fi
-            \ifx\@secondauthor\empty \else
-                  \iffemminile
-                        \def\@nomecandidato{\Candidate:}%
-                  \else
-                        \def\@nomecandidato{\Candidati:}%
-                  \fi
-            \fi}{}
-      \fi
-%    \end{macrocode}
-%
-% For the names of the supervisor(s) and of the candidate(s) a different approach is used for each one
-% of the three categories of theses. If a bachelor degree report is dealt with, the name of the \emph{only}
-% candidate is centerd and written in caps-and-small-caps.
-%    \begin{macrocode}
-      \iflaureatriennale
-            \begin{center}%
-                  \large\mdseries\textsc{\@author}
-            \end{center}%
-%    \end{macrocode}
-% For doctoral and master theses two virtual boxes (actually macros) are filled up so as to align
-% the supervisor name(s) and, in second virtual box, the candidate name(s). The label is set in the
-% first line with proper number and gender; in the second line the first name, and in the subsequent lines,
-% if there are any, the other names. These virtual boxes actually contain a tabular environment each; these
-% environments shall be actually typeset when these virtual box macros are executed. If the \texttt{classica}
-% option is in force no label is set over the principal advisor name, but a label is set over the co-advisor
-% name(s). The type size is also e little different for the \texttt{classica} option. The |\protect| command
-% is used to protect the names in case they contain accent macros that might be expanded at the wrong moment.
-%    \begin{macrocode}
-      \else
-%  Per laurea e dottorato con relatori e correlatori...
-         \def\BoxRelatori{%
-            \begin{tabular}[t]{l}%
-            \hbox{{\@ifundefined{StileTrieste}{\large}{}%
-                  \textbf{\protect\@nomerelatore}}}\\[.6ex]
-            \hbox{{\large\textrm{\protect\@principaladviser}}}%
-            \ifx\@secondadviser\empty \else
-               \@ifundefined{StileTrieste}{}{%
-                  \ifx\@thirdadviser\empty
-                     \ifx\@secondadviser\empty\else
-                           \\[1.5ex]\textbf{\Correlatore:}%
-                     \fi
-                  \else
-                     \\[1.5ex]\textbf{\Correlatori:}%
-                  \fi}
-               \\[.6ex]\hbox{{\large\textrm{\protect\@secondadviser}}}%
-            \fi
-            \ifx\@thirdadviser\empty \else
-               \\[.6ex] \hbox{{\large\textrm{\protect\@thirdadviser}}}%
-            \fi
-            \end{tabular}%
-         }%
-%    \end{macrocode}
-% A similar approach is taken for the candidate name(s)
-%    \begin{macrocode}
-      \def\BoxCandidati{%
-         \begin{tabular}[t]{l}%
-            \hbox{{\expandafter
-               \@ifundefined{StileTrieste}{\large}{}%
-               \textbf{\protect\@nomecandidato}}}\\[.6ex]
-               \hbox{{\large\textrm{\protect\@author}}}%
-               \ifx\@secondauthor\empty
-               \else
-                  \\\hbox{{\large\textrm{\protect\@secondauthor}}}%
-               \fi
-               \ifx\@thirdauthor\empty
-               \else
-                  \\\hbox{{\large\textrm{\protect\@thirdauthor}}}%
-               \fi
-         \end{tabular}%
-      }%
-%    \end{macrocode}
-% The real typesetting of these name lists takes place now; if the thesis is referred to the
-% PhD school one type of layout is used, otherwise the default master thesis layout is used; remember
-% that the bachelor degree case has already taken place. For the doctoral dissertation the doctoring
-% person name is typeset centered in one line by itself and everything else is set 3em below
-% into a three column table extended to the |\hsize|, the first line containing the person labels
-% and the second line containing the true names. The central column is used just for spacing, but it does
-% not contain anything.
-%    \begin{macrocode}
-         \ifdottorato
-            \begin{center}\large
-               \textbf{\@author}\\[3em]
-               {\normalsize
-               \begin {tabular*}{\hsize}{@{\extracolsep{\fill}}ccc}
-               \ifx\@tutore\empty\else
-                   \textbf{\Tutore}
-               \fi
-               &\relax&
-               \ifx\@principaladviser\empty\else
-                     \textbf{\@nomerelatore}
-               \fi
-               \\
-               \ifx\@tutore\empty\else
-                     \@tutore
-               \fi
-               &\relax&
-               \ifx\@principaladviser\empty\else
-                     \@principaladviser
-               \fi
-               \end{tabular*}
-               }%
-            \end{center}
-         \else
-%    \end{macrocode}
-% For the master thesis the two virtual boxes are set one besides the other but skewed
-% so that to the right or, respectively, to the left of every name there is enough space for the signatures.
-% With the \texttt{classica} option in force the two boxes are simply aligned.
-%    \begin{macrocode}
-            \expandafter
-            \@ifundefined{StileTrieste}{%
-               \begin{flushleft}%
-                     \BoxRelatori
-               \end{flushleft}\par\vspace*{-1.5\baselineskip}
-               \begin{flushright}%
-                     \BoxCandidati
-               \end{flushright}\par}{%
-               \noindent
-               \makebox[\textwidth]{\BoxRelatori
-                    \hfill\BoxCandidati}\par}%
-          \fi
-      \fi
-%    \end{macrocode}
-% The final item is the optional name of the company supervisor.
-%    \begin{macrocode}
-\ifx\@tutoreaziendale\@empty\else
-    \vfill\vfill
-    {\centering \textbf{\@tutoreaziendalename}\\[.6ex]
-    \@tutoreaziendale\par}
-\fi
-%    \end{macrocode}
-% All the material now is on the page; we put some more vertical glue and we close
-% the page sending it to the output file; the final |\endgroup| closes the |\begingroup| that was
-% set at the beginning of this long macro.
-%    \begin{macrocode}
-      \vfill\par\null
-      \if@twoside\cleardoublepage\else\clearpage\fi
-\endgroup}
-%</topfrn>
-%    \end{macrocode}
-%
-% \subsection{A sample configuration file}
-% The following code generates a simple configuration file that the user
-% can change at will; it can be used as a template for generating a really
-% personal configuration file.
-%    \begin{macrocode}
-%<*topcfg>
-%%
-%%================================================================
-%% This file is the only file of the TOPtesi bundle that the user
-%% can modify without restrictions in order to personalize the
-%% contents of this configuration file to his/her needs. The user
-%% can add or remove lines, comment or uncomment lines, change the
-%% arguments to the macros, add definitions and so on.
-%%================================================================
-%%
-\ateneo{Politecnico di Torino}
-\facolta{Ingegneria}
-\FacoltaDi{Facolt\`a di }
-%%\DottoratoIn{Corso di dottorato in }
-\CorsoDiLaureaIn{Corso di Laurea in }
-\TesiDiLaurea{Tesi di Laurea Magistrale}
-%%\NomeMonografia{Monografia di Laurea}
-%%\NomeDissertazione{Tesi di Dottorato}
-\InName{in}
-%%\TutorName{Tutore}
-%%\CycleName{ciclo}
-%</topcfg>
-%    \end{macrocode}
-% \subsection{The package file \texttt{topcoman.sty}}
-% This file may be used as an independent extension package for the \texttt{report}
-% document class, and possibly for other classes
-%    \begin{macrocode}
-%<*topcmn>
-\NeedsTeXFormat{LaTeX2e} % lavora solo con LaTeX 2e
-\ProvidesPackage{topcoman}%
-    [2005/12/08 v.4.00.00 Additional commands for the TOPtesi bundle]
-%    \end{macrocode}
-% The new command |\DeclareSlantedCapitalGreekLetters| optionally sets the capital
-% Greek letters in math mode with the glyphs taken from the math italic fonts, not from
-% the math roman fonts, at is is by default; some persons prefer to use both symbols with
-% different meanings, so this command lets them do so.
-%    \begin{macrocode}
-\newcommand*\DeclareSlantedCapitalGreekLetters{%
-   \mathchardef\Gamma="7100
-   \mathchardef\Delta="7101
-   \mathchardef\Theta="7102
-   \mathchardef\Lambda="7103
-   \mathchardef\Xi="7104
-   \mathchardef\Pi="7105
-   \mathchardef\Sigma="7106
-   \mathchardef\Upsilon="7107
-   \mathchardef\Phi="7108
-   \mathchardef\Psi="7109
-   \mathchardef\Omega="710A
-}
-%    \end{macrocode}
-% The |\ensuremath| command is defined in the \LaTeX\ kernel from a certain version on;
-% should the user employ a really old \LaTeXe\ implementation this definition
-% supplies the missing one.
-%    \begin{macrocode}
-\providecommand{\ensuremath}[1]{\ifmmode#1\else$#1$\fi}%
-%    \end{macrocode}
-% The following commands may be already defined; should they be missing they are supplied here.
-% The greatest part of them is already defined in the Italian option to the
-% \texttt{babel} language; but remember; this package may be used as a stand alone one, without
-% the initial call by the \texttt{toptesi} document class, so that the language Italian might
-% be undefined.
-%    \begin{macrocode}
-\providecommand{\ohm}{\ensuremath{{\mathrm{\Omega}}}}
-\providecommand{\ped}[1]{\ensuremath{_{\mathrm{#1}}}}
-\providecommand{\ap}[1]{\ensuremath{^{\mathrm{#1}}}}
-\providecommand{\unit}[1]{\ensuremath{{\mathrm{\,#1}}}}
-\providecommand{\gei}{\ensuremath{{\mathop{\mathrm{j}}\nolimits}}}
-\providecommand{\eu}{\ensuremath{{\mathop{\mathrm{e}}\nolimits}}}
-\providecommand{\micro}{\ensuremath{\ifx\muup\undefined\mu\else\muup\fi}}
-\providecommand{\gradi}{\ensuremath{^\circ}}
-%    \end{macrocode}
-%
-% The next set of definitions are used to list a program file. There are
-% better packages to perform this task in the CTAN archives. This set of macros
-% has the advantage that is very short and light on the computer memory; nevertheless
-% it performs its duty pretty well. The font face is the typewriter one; the
-% font size is chosen so as to
-% allow approximately 80 characters in the text width of the thesis. It respects
-% the possible indentation tabs (ASCII code 9) by inserting the correct amount
-% of typewriter spaces so as to align every line to the correct boundary which
-% is ``zero modulo eight''. If the program file contains some form feed ASCII
-% characters (ASCII code 12), this \TeX\ code inserts a new page command. The
-% code may appear strange, and it does because it makes heavy use of the dirty
-% tricks of appendix~D of the \TeX\-book.
-%    \begin{macrocode}
-\def\listing#1{\par\begingroup
-\programma \input #1 \endgroup}
-\def\uncatcodespecials{\def\do##1{\catcode`##1=12}\dospecials}
-\def\programma{\footnotesize\tt \parindent 0pt
-\def\par{\leavevmode\egroup\box0\endgraf}
-\catcode`\`=\active \catcode`\^^I=\active \catcode`\^^L=\active
-\obeylines \uncatcodespecials \obeyspaces
-\everypar{\startbox}}
-%    \end{macrocode}
-% The above code does the whole work, but the alignment to the tab stops and the
-% new page command associated to the form feed ASCII character are done with the
-% following definitions.
-%    \begin{macrocode}
-\newdimen\tabwidth \setbox0=\hbox{\footnotesize\tt\space} \tabwidth=8\wd0
-\def\startbox{\setbox0=\hbox\bgroup}
-{\obeyspaces\global\let =\ }
-{\catcode`\`=\active \gdef`{\relax\lq}}
-{\catcode`\^^I=\active
-\gdef^^I{\leavevmode\egroup \dimen0=\wd0
-\divide\dimen0 by\tabwidth
-\multiply\dimen0 by\tabwidth
-\advance\dimen0 by\tabwidth
-\wd0=\dimen0 \box0 \startbox}}
-{\catcode`\^^L=\active \gdef^^L{\par\penalty-10000}}
-%    \end{macrocode}
-%
-% The following code is already set in the \texttt{toptesi} package; here it is
-% repeated because this package might be used as a stand alone one. Remember that
-% the comma as a decimal separator is required for all languages except English.
-%    \begin{macrocode}
-\mathcode`\,="013B
-\catcode`\^^Z=10
-%    \end{macrocode}
-%
-% The following commands are used to write the ``lower case'' roman numerals
-% with the small-caps; in order to avoid complications with missing fonts or math
-% environments we make sure to typeset these numerals with script style capitals; this solution
-% is not probably the best one but it works. Unfortunately it typesets these roman numerals
-% only with the roman type; for this thesis bundle roman numerals are used only for folios,
-% therefore there are no problems with a choice of fonts shapes and series.
-%    \begin{macrocode}
-\DeclareRobustCommand*{\@roman}[1]{\textsc{\romannumeral#1}}%
-%    \end{macrocode}
-%
-% A user, Antonio Mele, has suggested and requested the possibility of having
-% the figure and table name inserted automatically when the |\ref|command is
-% issued. For single citations the solution works fine, but for range
-% references it does not work. In Italian the name must be lower case while in
-% other languages, specifically in English, the name has a capital initial.
-% Since this feature might be handy in certain circumstances and annoying in
-% other ones, this feature can be turned on and off at will with the enabling
-% and disabling commands. By default the feature is disabled.
-%    \begin{macrocode}
-\def\ft@figure{\iflanguage{italian}{\MakeLowercase{\figurename}}%
-            {\figurename}~}
-\def\ft@table{\iflanguage{italian}{\MakeLowercase{\tablename}}%
-            {\tablename}~}
-%
-\newcommand*\EnableFigTabNames{%
-            \let\p@figure\ft@figure\let\p@table\ft@table}
-\newcommand*\DisableFigTabNames{%
-            \let\p@figure\empty\let\p@table\empty}
-%
-\DisableFigTabNames
-%</topcmn>
-%    \end{macrocode}
-% \subsection{The class option file \texttt{topsiz14.clo}}
-% Among the options available there is the possibility of typesetting the thesis with
-% a large normal font size, specifically 14pt. The following file is just a copy of the
-% other size??.clo class option files where the font dimensions have been modified so
-% as to be coherent whit a normal size of 14pt. There is nothing  unusual except that
-% the font sizes are taken from the kernel macros where the magic numbers of non
-% integer sizes are specified. The baseline skips are substantially the ones taken
-% from the 10pt default size and multiplied by 1.44, or those of the 12pt option
-% multiplied by 12; in both cases they were rounded to integers most of the times.
-% Since the whole bundle works only under \LaTeXe, we deleted all the tests for
-% compatibility with \LaTeX\,209 and the corresponding test branches.
-%    \begin{macrocode}
-%<*top14>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesFile{topsiz14.clo}%
-              [2006/04/16 v.4.00.01  TopTesi 14pt size-option file]
-\renewcommand\normalsize{%
-   \@setfontsize\normalsize\@xivpt{18}%
-   \abovedisplayskip 14\p@ \@plus3\p@ \@minus7\p@
-   \abovedisplayshortskip \z@ \@plus3\p@
-   \belowdisplayshortskip 8.5\p@ \@plus3.5\p@ \@minus3\p@
-   \belowdisplayskip \abovedisplayskip
-   \let\@listi\@listI}
-\normalsize
-\renewcommand\small{%
-   \@setfontsize\small\@xiipt{14}%
-   \abovedisplayskip 13\p@ \@plus3\p@ \@minus6\p@
-   \abovedisplayshortskip \z@ \@plus3\p@
-   \belowdisplayshortskip 7.5\p@ \@plus3.5\p@ \@minus3\p@
-   \def\@listi{\leftmargin\leftmargini
-               \topsep 9\p@ \@plus3\p@ \@minus5\p@
-               \parsep 4.5\p@ \@plus2\p@ \@minus\p@
-               \itemsep \parsep}%
-   \belowdisplayskip \abovedisplayskip
-}
-\renewcommand\footnotesize{%
-   \@setfontsize\footnotesize\@xipt{13}
-   \abovedisplayskip 12\p@ \@plus2\p@ \@minus5\p@
-   \abovedisplayshortskip \z@ \@plus3\p@
-   \belowdisplayshortskip 7\p@ \@plus3\p@ \@minus3\p@
-   \def\@listi{\leftmargin\leftmargini
-               \topsep 6\p@ \@plus2\p@ \@minus2\p@
-               \parsep 3\p@ \@plus2\p@ \@minus\p@
-               \itemsep \parsep}%
-   \belowdisplayskip \abovedisplayskip
-}
-\renewcommand\scriptsize{\@setfontsize\scriptsize\@xpt{12}}
-\renewcommand\tiny{\@setfontsize\tiny\@viiipt\@xpt}
-\renewcommand\large{\@setfontsize\large\@xviipt{22}}
-\renewcommand\Large{\@setfontsize\Large\@xxpt{25}}
-\renewcommand\LARGE{\@setfontsize\LARGE\@xxvpt{30}}
-\renewcommand\huge{\@setfontsize\huge\@xxvpt{30}}
-\let\Huge=\huge
-\if@twocolumn
-  \setlength\parindent{1em}
-\else
-  \setlength\parindent{1.5em}
-\fi
-\setlength\smallskipamount{3.5\p@ \@plus 1\p@ \@minus 1\p@}
-\setlength\medskipamount{7\p@ \@plus 2\p@ \@minus 2\p@}
-\setlength\bigskipamount{14\p@ \@plus 4\p@ \@minus 4\p@}
-\setlength\headheight{14\p@}
-\setlength\headsep   {36\p@}
-\setlength\topskip   {14\p@}
-\setlength\footskip{30\p@}
-\if@compatibility \setlength\maxdepth{4\p@} \else
-\setlength\maxdepth{.5\topskip} \fi
-  \setlength\@tempdima{\paperwidth}
-  \addtolength\@tempdima{-2in}
-  \setlength\@tempdimb{390\p@}
-  \if@twocolumn
-    \ifdim\@tempdima>2\@tempdimb\relax
-      \setlength\textwidth{2\@tempdimb}
-    \else
-      \setlength\textwidth{\@tempdima}
-    \fi
-  \else
-    \ifdim\@tempdima>\@tempdimb\relax
-      \setlength\textwidth{\@tempdimb}
-    \else
-      \setlength\textwidth{\@tempdima}
-    \fi
-  \fi
-  \@settopoint\textwidth
-  \setlength\@tempdima{\paperheight}
-  \addtolength\@tempdima{-2in}
-  \addtolength\@tempdima{-1.5in}
-  \divide\@tempdima\baselineskip
-  \@tempcnta=\@tempdima
-  \setlength\textheight{\@tempcnta\baselineskip}
-\addtolength\textheight{\topskip}
-\if@twocolumn
- \setlength\marginparsep{10\p@}
-\else
- \setlength\marginparsep{10\p@}
-\fi
-\setlength\marginparpush{7\p@}
-  \if@twoside
-    \setlength\@tempdima        {\paperwidth}
-    \addtolength\@tempdima      {-\textwidth}
-    \setlength\oddsidemargin    {.4\@tempdima}
-    \addtolength\oddsidemargin  {-1in}
-    \setlength\marginparwidth   {.6\@tempdima}
-    \addtolength\marginparwidth {-\marginparsep}
-    \addtolength\marginparwidth {-0.4in}
-  \else
-    \setlength\@tempdima        {\paperwidth}
-    \addtolength\@tempdima      {-\textwidth}
-    \setlength\oddsidemargin    {.5\@tempdima}
-    \addtolength\oddsidemargin  {-1in}
-    \setlength\marginparwidth   {.5\@tempdima}
-    \addtolength\marginparwidth {-\marginparsep}
-    \addtolength\marginparwidth {-0.4in}
-    \addtolength\marginparwidth {-.4in}
-  \fi
-  \ifdim \marginparwidth >2in
-     \setlength\marginparwidth{2in}
-  \fi
-  \@settopoint\oddsidemargin
-  \@settopoint\marginparwidth
-  \setlength\evensidemargin  {\paperwidth}
-  \addtolength\evensidemargin{-2in}
-  \addtolength\evensidemargin{-\textwidth}
-  \addtolength\evensidemargin{-\oddsidemargin}
-  \@settopoint\evensidemargin
-  \setlength\topmargin{\paperheight}
-  \addtolength\topmargin{-2in}
-  \addtolength\topmargin{-\headheight}
-  \addtolength\topmargin{-\headsep}
-  \addtolength\topmargin{-\textheight}
-  \addtolength\topmargin{-\footskip}
-  \addtolength\topmargin{-.5\topmargin}
-  \@settopoint\topmargin
-\setlength\footnotesep{10.4\p@}
-\setlength{\skip\footins}{13\p@ \@plus 4\p@ \@minus 2\p@}
-\setlength\floatsep    {14\p@ \@plus 2\p@ \@minus 4\p@}
-\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
-\setlength\intextsep   {16\p@ \@plus 4\p@ \@minus 4\p@}
-\setlength\dblfloatsep    {16\p@ \@plus 2\p@ \@minus 4\p@}
-\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
-\setlength\@fptop{0\p@ \@plus 1fil}
-\setlength\@fpsep{10\p@ \@plus 2fil}
-\setlength\@fpbot{0\p@ \@plus 1fil}
-\setlength\@dblfptop{0\p@ \@plus 1fil}
-\setlength\@dblfpsep{10\p@ \@plus 2fil}
-\setlength\@dblfpbot{0\p@ \@plus 1fil}
-\setlength\partopsep{3\p@ \@plus 2\p@ \@minus 2\p@}
-\def\@listi{\leftmargin\leftmargini
-            \parsep 5\p@  \@plus2.5\p@ \@minus\p@
-            \topsep 10\p@ \@plus4\p@   \@minus6\p@
-            \itemsep5\p@  \@plus2.5\p@ \@minus\p@}
-\let\@listI\@listi
-\@listi
-\def\@listii {\leftmargin\leftmarginii
-              \labelwidth\leftmarginii
-              \advance\labelwidth-\labelsep
-              \topsep    5\p@   \@plus2.5\p@ \@minus\p@
-              \parsep    2.5\p@ \@plus\p@    \@minus\p@
-              \itemsep   \parsep}
-\def\@listiii{\leftmargin\leftmarginiii
-              \labelwidth\leftmarginiii
-              \advance\labelwidth-\labelsep
-              \topsep    2.5\p@\@plus\p@\@minus\p@
-              \parsep    \z@
-              \partopsep \p@ \@plus\z@ \@minus\p@
-              \itemsep   \topsep}
-\def\@listiv {\leftmargin\leftmarginiv
-              \labelwidth\leftmarginiv
-              \advance\labelwidth-\labelsep}
-\def\@listv  {\leftmargin\leftmarginv
-              \labelwidth\leftmarginv
-              \advance\labelwidth-\labelsep}
-\def\@listvi {\leftmargin\leftmarginvi
-              \labelwidth\leftmarginvi
-              \advance\labelwidth-\labelsep}
-%</top14>
-%    \end{macrocode}
-% \subsection{The package file \texttt{trieste.sty} for the \texttt{classica} option}
-% As mentioned above, the \texttt{classica} option was devised in order to cope with theses
-% in humanities and the specifications came from Paolo Ciacchi, a student of the University
-% of Trieste, who was preparing a master thesis in classical Greek philology. The necessity of
-% the large normal size derived from the necessity of having clear mark-up signs among the
-% myriad philologists use, that sometimes let me believe that the philological mark-up requires
-% typesetting environments similar to the mathematical ones, since the material to be typeset
-% does not form a linear sequence, as in plain text, but a bi-dimensional structure as in mathematics.
-% In previous version this file was input with the option \texttt{trieste}, but another option \texttt{classica}
-% was defined so as not to tie these facilities only to the University of Trieste.
-%
-% The other requirements involve the title page and I agreed to implement them, since they are
-% likely to be useful for other universities as well; the effort for localizing this bundle
-% makes this point less stringent compared to the previous versions, but there are other layout fine points that
-% cannot be solved with a simple substitution of infix strings.
-%
-% In order to have the whole bundle be aware of the option classica a specific control sequence
-% is defined so as to be unique to this file. This definition is not ``undefined'' only if this file
-% has already been input.
-%    \begin{macrocode}
-%<*toptrst>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{trieste}%
-    [2005/12/08 v.4.00.00 opzioni specifiche per Trieste]
-\def\StileTrieste{classica}
-%    \end{macrocode}
-%
-% For the options specific to this package a couple of boolean variables are defined and the option
-% definitions set them to the value ``true''.
-%    \begin{macrocode}
-\newif\if@utoretitolo \@utoretitolofalse
-\newif\if@ldstyle \@ldstylefalse
-\DeclareOption{autoretitolo}{\@utoretitolotrue}
-\DeclareOption{oldstyle}{\@ldstyletrue}
-\ProcessOptions
-%    \end{macrocode}
-% The singular and plural masculine and feminine strings for ``candidate'' are redefined. For other languages
-% the configuration file comes in handy.
-%    \begin{macrocode}
-\def\Candidato{Laureando}
-\def\Candidata{Laureanda}
-\def\Candidati{Laureandi}
-\def\Candidate{Laureande}
-%    \end{macrocode}
-%
-% Since theses in humanities may end up to occupy several volumes (classically ``tomo''
-% in Italian means ``volume'', although the latter spelling is valid also in Italian with the same meaning
-% but appears to be  neglected by the humanists; in English ``tome'' indicates a ``large book''; in Italian the
-% meaning nuance of ``tomo'' is a little different because it is used to indicate the volumes
-% into which a large typeset work is divided; the humanists, as usual, know well their words and use them properly!)
-% a mechanism is set up to create a different title page for each volume; we need a volume counter
-% and a command to start each volume; the |\frontespizio| macro typesets the real title page and we have
-% already seen that it can print the volume ordinal. The localization allows to change the infix string that
-% is going to be printed. When several tomes are involved, instead of using the |\frontespizio| macro,
-% use the |\tomo| one, that provides to stepping up the volume counter before actually printing the new tome
-% title page.
-%    \begin{macrocode}
-\newcounter{tomo}
-\newcommand*{\tomo}{\clearpage\stepcounter{tomo}\frontespizio}
-%    \end{macrocode}
-% Folios as well are to be redefined and also the page styles require a redefinition so as to being
-% able to use old style numbers. The macro |\lapagina| (it's not a case the this macro name is the
-% direct translation of ``the page'') contains the folio number; if it is in roman numerals nothing
-% happens, but if the old style numbers are required the folio is surrounded by the proper macros
-% so as to expand the folio macro before typesetting it in old style. The page style does not need
-% an actual redefinition, because the original definition in file \texttt{toptesi.sty} already uses
-% |\lapagina| as the typeset folio indicator.
-%    \begin{macrocode}
-\renewcommand*{\lapagina}{%
-    \ifnumeriromani
-        \thepage
-    \else
-        \if@ldstyle
-            \expandafter\oldstylenums\expandafter{\thepage}%
-        \else
-            \thepage
-        \fi
-    \fi
-    }
-%    \end{macrocode}
-% But we actually have to redefine the page style for the new headings because the \texttt{classica}
-% options changes completely the left and the right headers depending on the option \texttt{autoretitolo};
-% in this case the left header contains the candidate's name a a short version of the thesis title,
-% while the right heading contains the chapter (short) title; if this option is not in force, headings
-% appear as usual. The redefinition of the \texttt{headings} page style is made only of this option
-% is in force. IN case of two side printing where the left head and the right head are different,
-% the left heading contains the author name and the short title name; if there are other authors the
-% first author name is printed followed by ``et al.''; if the over all header string exceeds the text
-% width, a message is printed so as to induce the user to make use of the optional |\titolo| argument,
-% the one that is supposed to contain the short title. In the right heading there is the chapter title;
-% again if the header turns out to bee too wide, a message is issued to the user.
-%
-% More complicated things are done when typesetting on one side; in facts the author name
-% (possibly followed by ``et al.'') and the short thesis title are typeset on the left
-% of the only header while the chapter title is typeset on the right; in the unlikely
-% situation where these two elements separated by at least 2em of white space do not exceed
-% the text width, they are printed, but if they do, as it is likely to happen, then my suggestion
-% would be not to use the \texttt{autoretitolo} option, but if the user absolutely wants this
-% layout, then the author's name, possibly followed by ``et al.'', and the short thesis title
-% are set in a vertical box; the same happens for the chapter title in another box; these
-% texts are set withe ragged margins on the center, and finally these boxes are set one next
-% to the other with an intermediate glob of infinitely stretchable glue, and finally set
-% in the header box with a rule underneath the two of them. The result might be barely acceptable
-% if both vertical boxes do not exceed two lines and no  words have to be hyphenated, but in
-% general I believe it is an ugly layout; the user is warned!
-%    \begin{macrocode}
-\if@utoretitolo
-   \if@twoside
-%
-       \renewcommand*{\ps@headings}{\let\@mkboth\markboth%
-       \def\@oddfoot{\null \hfill \textbf{\lapagina} \hfill \null}%
-       \let\@evenfoot\@oddfoot
-%
-       \def\@evenhead{%
-           \setbox\@intesta\hbox{\latintext
-           \footnotesize\strut\textsc{%
-           \@author\ifx\@secondauthor\empty\else\ et al.\fi: \@stitle}%
-           }%
-       \ifdim\wd\@intesta>\textwidth\headwrn{\titolo}\fi
-       \underline{\makebox[\textwidth]{\box\@intesta}}}%
-       \def\@oddhead{\latintext
-           \setbox\@intesta\hbox{%
-               \footnotesize\strut\textsl{\rightmark}}%
-       \ifdim\wd\@intesta>\textwidth \headWarn{\section}\fi%
-       \underline{\makebox[\textwidth]{\box\@intesta}}}%
-       \def\chaptermark##1{\markright{\thechapter\ -- ##1}{}}%
-       \def\sectionmark##1{}}%
-   \else
-       \renewcommand*{\ps@headings}{\let\@mkboth\markboth
-           \def\@oddfoot{\null \hfill \textbf{\lapagina}\hfill \null}%
-           \let\@evenfoot\empty\let\@evenhead\empty
-           \def\@oddhead{{\setbox\z@\hbox{\latintext\footnotesize
-           \textsc{%
-           \@author\ifx\@secondauthor\empty\else\ et al.\fi: \@stitle}}%
-           \setbox\tw@\hbox{\latintext\footnotesize\textsl{\rightmark}}%
-           \dimen@=2em\advance\dimen@\wd\z@\advance\dimen@\wd\tw@
-           \ifdim\dimen@<\textwidth \relax
-           \else
-             \setbox\z@\vbox{\hsize.48\textwidth\parindent\z@\raggedright
-             \latintext\footnotesize\textsc{%
-             \@author\ifx\@secondauthor\empty\else\ et al.\fi: \@stitle
-             }}%
-             \setbox\tw@\vbox{\hsize.48\textwidth\parindent\z@\raggedleft
-                 \latintext\footnotesize\textsl{\rightmark}}%
-           \fi
-           \setbox\@intesta\vbox to\z@{%
-                \vss\hbox to\textwidth{\strut\box\z@\hfill\box\tw@}}%
-           \underline{\box\@intesta}}}%
-           \def\chaptermark##1{\markright{\thechapter\ -- ##1}}}
-   \fi
-\fi
-%    \end{macrocode}
-% Here |\annoaccademico| is defined that typesets the infix string corresponding to
-% ``Anno accademico'' followed by the year range in old style numbers (irrespective
-% of the \texttt{oldstyle} option); Commands for the localization are provided so as
-% to set a different string, possibly through the configuration file. In order to set
-% an adequate en-dash between the old style numbers a new definition is given that
-% takes care to set the dash at a height above the base line that copes the specific
-% shape of the old style numbers.
-%    \begin{macrocode}
-\newcommand*\NomeAnnoAccademico[1]{\gdef\AnnoAccademico{#1}}
-\@ifundefined{AnnoAccademico}{\gdef\AnnoAccademico{Anno accademico}}{}
-%
-\def\annoaccademico#1{%
-  \def\@submitdate{{\large\textsc{\AnnoAccademico}} {\Large\s@tanno#1!}}}
-\def\s@tanno#1-#2!{\oldstylenums{#1\EnDash#2}}
-
-\def\EnDash{{\settowidth{\dimen@}{\large\sc I}%
-\setbox\tw@\hbox{2}\dimen\tw@.5\ht\tw@\advance\dimen\tw@-.5\dp\tw@
-\dimen4\dimen\tw@\advance\dimen4by.0385ex\relax
-\advance\dimen\tw@-.0385ex\relax
-\makebox[1.5\dimen@]{%
-    \vrule\@width\dimen@\@height\dimen4\@depth-\dimen\tw@}}}
-%    \end{macrocode}
-% The footnote rule separator is also longer that the default one. Dealing with notes
-% the footnote separator is also changes as well as the footnote skip. But the humanists
-% like to have also unnumbered notes within numbered ones, as if they were two separate
-% sets; of course specialized extensions are available on CTAN, but as a poor man solution
-% the command |\nota| was introduced that inserts a note with a symbol as a note mark;
-% the symbol \emph{must} be a mathematica symbol as the dagger or the double dagger;
-% by default it is the asterisk. At the same time the default definition of the mathematical
-% asterisk is that of a binary operator; I have experienced that the note symbol gets a
-% better positioning if if is declared an ordinary symbol, treated as, say, a letter. This
-% is why its math code is redefined. A final unusual request was to be able to put a blank
-% unnumbered note, as a (rather wide) note separator. The command |\NoteWhiteLine| has to
-% be used at the end of the text of the preceding note.
-%    \begin{macrocode}
-\renewcommand\footnoterule{%
-  \kern-6\p@
-  \hrule\@width.4\columnwidth
-  \kern5.6\p@}
-\setlength\footnotesep{12\p@}
-\setlength{\skip\footins}{24\p@ \@plus 4\p@ \@minus 2\p@}
-\DeclareMathSymbol{*}{\mathalpha}{symbols}{"03}
-\newcommand*\nota[1][*]{%
-    \xdef\@thefnmark{\ensuremath{\m@th#1}}\@footnotemark\@footnotetext
-}
-\newcommand*{\NoteWhiteLine}{\par\vspace*{-.3\baselineskip}}
-%    \end{macrocode}
-%
-% The humanists asked me to create some other simple macros: one for skipping a whole page,
-% without header and footer; another to compose a dedication page; a third one for typesetting
-% a page with one or more witty sentences. The first request has a trivial solution, but at
-% least |\paginavuota| is much shorter to type in that its expansion.
-%
-% The environments \texttt{dedica} for the dedication, and \texttt{citazioni} for the witty
-% sentences are almost identical; both typeset their content with a reduced text width, half
-% of the normal one; this column is typeset on the right of the page. The \texttt{dedica}
-% environment is supposed to be used in the front matter, while the witty sentence environment
-% may be used anywhere. The dedication is typeset in |\Large| font size and in italics; if the
-% author wants a different size and/or a different shape s/he must specify it at the beginning
-% of the dedication. The \texttt{citazioni} environment typesets its material with the default
-% font shape series and size, so the author has to specify any change s/he desires.
-%
-%    \begin{macrocode}
-\newcommand*\paginavuota{\clearpage\thispagestyle{empty}\null\clearpage}
-%
-\newenvironment{dedica}{\clearpage
-    \if@twoside
-        \ifodd\c@page\else\thispagestyle{empty}\clearpage\fi
-    \fi
-    \thispagestyle{empty}%
-    \list{}{\labelwidth\z@
-    \leftmargin.5\textwidth
-    \parindent\z@
-    \raggedright\LARGE\itshape}\item[]
-}{%
-    \endlist\clearpage
-}
-%
-\newenvironment{citazioni}{%
-    \clearpage\thispagestyle{empty}
-    \list{}{\labelwidth\z@
-    \leftmargin.5\textwidth
-    \parindent\z@
-    \raggedright}\item[]
-}{%
-    \endlist\clearpage
-}
-%</toptrst>
-%    \end{macrocode}
-% \Finale
-% \endinput
diff --git a/Master/texmf-dist/source/latex/toptesi/toptesi.ins b/Master/texmf-dist/source/latex/toptesi/toptesi.ins
deleted file mode 100644
index da3e4a1a532..00000000000
--- a/Master/texmf-dist/source/latex/toptesi/toptesi.ins
+++ /dev/null
@@ -1,113 +0,0 @@
-%%

-%% This file is necessary to extract from file toptesi.dtx the following files:

-%%      toptesi.cls,

-%%      toptesi.sty,

-%%      topcoman.sty,

-%%      topfront.sty,

-%%      topsiz14.clo,

-%%      trieste.sty,

-%%      toptesi.cfg

-%% that are strictly speaking the components of the TOPtesi bundle and form

-%% the Work. The extraction is performed by means of the doctrip utility

-%% that extracts practically only the uncommented lines so that their loading

-%% becomes very quick. The bundle documentations in Italian is contained

-%% in the document toptesi-doc.pdf (part of the bundle), and further

-%% documentation in English may be obtained by LaTeX processing the

-%% documented TeX source file toptesi.dtx.

-%%

-%% ----------------------------------------

-%%

-%%  This system is distributed in the hope that it will be useful,

-%%  but WITHOUT ANY WARRANTY; without even the implied warranty of

-%%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

-%%

-%% IMPORTANT NOTICE:

-%%

-%% Copyright 1989--2006 Claudio Beccari

-%% All rights reserved.

-%%

-%% Permission is granted to distribute verbatim copies of this file

-%% together with toptesi.dtx.

-%%

-%% No other permissions to copy or distribute this file in any form

-%% are granted and in particular no permission to modify its contents.

-%%

-%% --------------- start of docstrip commands ------------------

-%%

-\def\batchfile{toptesi.ins}

-\input docstrip.tex

-\preamble

-

-Copyright 1989--2005 Claudio Beccari All rights reserved.

-

- This system is distributed in the hope that it will be useful,

- but WITHOUT ANY WARRANTY; without even the implied warranty of

- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

-

-

-IMPORTANT NOTICE:

-

-This file is subject to the LPPL licence, version 1.3 or any subsequent

-version. Copy of the LaTeX Project Public Licence is downloadable from

-any CTAN archive.

-

-

-\endpreamble

-

-\keepsilent

-

-\Msg{*** Generazione dei file del pacchetto TOPtesi ***}

-

-\generateFile{toptesi.cls}{t}{\from{toptesi.dtx}{class}}

-\generateFile{toptesi.sty}{t}{\from{toptesi.dtx}{topsty}}

-\generateFile{topcoman.sty}{t}{\from{toptesi.dtx}{topcmn}}

-\generateFile{topfront.sty}{t}{\from{toptesi.dtx}{topfrn}}

-\generateFile{topsiz14.clo}{t}{\from{toptesi.dtx}{top14}}

-\generateFile{trieste.sty}{t}{\from{toptesi.dtx}{toptrst}}

-\generateFile{toptesi.cfg}{t}{\from{toptesi.dtx}{topcfg}}

-

-

-

-

-\ifToplevel{%

-\Msg{***********************************************************}

-\Msg{*\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-               \space\space\space\space\space\space\space\space*}

-\Msg{* Now move all files to a folder that is on   \space\space

-    \space\space\space\space\space\space\space\space\space\space

-                                                   \space\space*}

-\Msg{* the LaTeX search path      \space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-         \space\space\space\space\space\space\space\space\space*}

-\Msg{*\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-               \space\space\space\space\space\space\space\space*}

-\Msg{* In order to produce the English documentation run LaTeX *}

-\Msg{* on toptesi.dtx.      \space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-                                       \space\space\space\space*}

-\Msg{*\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-               \space\space\space\space\space\space\space\space*}

-\Msg{*    \space\space\space\space\space\space\space\space\space

-                                        \space\space\space\space

-    Buon lavoro! Happy TeXing!    \space\space\space\space\space

-    \space\space\space\space\space\space\space\space\space\space

-                                                         \space*}

-\Msg{***********************************************************}

-}

-

-\endinput