diff options
author | Karl Berry <karl@freefriends.org> | 2019-01-11 22:30:04 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2019-01-11 22:30:04 +0000 |
commit | 08d349abbfdc0c3b5b82fd472d692a1783f439cb (patch) | |
tree | 722991f9c6f2e78ed890bb7f7fd5d097b1e24f29 /Master/texmf-dist/source/latex/revtex/aip.dtx | |
parent | 69f4dc372985a82d9d1e813dfb2762422205dcea (diff) |
revtex (11jan19)
git-svn-id: svn://tug.org/texlive/trunk@49672 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex/revtex/aip.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/revtex/aip.dtx | 2062 |
1 files changed, 0 insertions, 2062 deletions
diff --git a/Master/texmf-dist/source/latex/revtex/aip.dtx b/Master/texmf-dist/source/latex/revtex/aip.dtx deleted file mode 100644 index 13c711fc823..00000000000 --- a/Master/texmf-dist/source/latex/revtex/aip.dtx +++ /dev/null @@ -1,2062 +0,0 @@ -% \iffalse meta-comment -% aip.dtx: package to change page grid, MVL. -% Copyright (c) 2008 American Institute of Physics -% mailto:tex@aip.org -% -% Disclaimer -% This file is distributed WITHOUT ANY WARRANTY; -% without even the implied warranty of -% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -% License -% You may distribute this file under the conditions of the -% LaTeX Project Public License 1.3 or later -% (http://www.latex-project.org/lppl.txt). -% ReadMe -% For the documentation and more detailed instructions for -% installation, typeset this document with \LaTeX. -% Maintenance Status -% This work has the LPPL maintenance status "maintained"; -% Current Maintainer of this work is Arthur Ogawa. -% -% This work consists of the main source file aip.dtx -% and the derived files -% aip.rtx, aip.pdf, aip.ins, aip.drv. -% Distribution: -% CTAN:macros/latex/contrib/aip/ -% -% Unpacking: -% tex aip.dtx -% -% Documentation: -% latex aip.dtx; ... -% -% Programm calls to get the documentation (example): -% pdflatex aip.dtx -% makeindex -s gind.ist aip -% makeindex -s gglo.ist -o aip.gls aip.glo -% pdflatex aip.dtx -% makeindex -s gind.ist aip -% pdflatex aip.dtx -% -% Installation: -% TDS:bibtex/bst/aip/ -% TDS:doc/latex/aip/ -% TDS:source/latex/aip/ -% TDS:tex/latex/aip/ -% -% Thanks, Heiko! -% This method of letting a single .dtx file serve as both -% documentation (via latex) and installer (via tex) follows -% the example of Heiko Oberdiek. Thanks! -%<*ignore> -\begingroup - \def\x{LaTeX2e}% -\expandafter\endgroup -\ifcase - 0\expandafter\ifx\csname processbatchFile\endcsname\relax\else1\fi\ifx\fmtname\x\else 1\fi - \relax -\else - \csname fi\endcsname -%</ignore> -%<*install> -%% This file will generate documentation and runtime files -%% from aip.dtx when run through LaTeX or TeX. -%% This file requires docstrip version 2.4 or higher available from -%% ftp://ctan.tug.org/tex-archive/macros/latex/unpacked/docstrip.tex -\input docstrip -\preamble - -This is a generated file; -altering it directly is inadvisable; -instead, modify the original source file. -See the URL in the file README. - -Copyright (c) 2008 American Institute of Physics. -mailto:tex@aip.org - -Maintained by Arthur Ogawa (mailto:arthur_ogawa at sbcglobal.net) -under contract to American Institute of Physics. - -License - You may distribute this file under the conditions of the - LaTeX Project Public License 1.3 or later - (http://www.latex-project.org/lppl.txt). - - This file is distributed WITHOUT ANY WARRANTY; - without even the implied warranty of MERCHANTABILITY - or FITNESS FOR A PARTICULAR PURPOSE. - -\endpreamble -\askforoverwritefalse -\keepsilent - \generate{% - %{ignore} -% \file{aip.ins}{\from{aip.dtx}{install}}% -% \file{aip.drv}{\from{aip.dtx}{driver}}% -% \usedir{tex/latex/aip}% - \file{aip4-1.rtx}{\from{aip.dtx}{package}}% - }% -\ifToplevel{ -\Msg{***********************************************************} -\Msg{*} -\Msg{* To finish the installation, please move} -\Msg{* aip.rtx} -\Msg{* into a directory searched by TeX;} -\Msg{* in a TDS-compliant installation:} -\Msg{* texmf/tex/macros/latex/aip/.} -\Msg{*} -\Msg{* To produce the documentation, - run aip.dtx through LaTeX.} -\Msg{*} -\Msg{* Happy TeXing} -\Msg{***********************************************************} -} -\endbatchfile -%</install> -%<*ignore> -\fi -%</ignore> -% \fi -% -% \GetFileInfo{aip.dtx}\CheckSum{1163} -% -% \iffalse ltxdoc klootch -%<*package> -%%% @LaTeX-file{ -%%% filename = "aip.dtx", -%%% version = "4.1r", -%%% date = "2010/07/25", -%%% time = "20:32:00 GMT-8", -%%% checksum = "1163", -%%% author = "Arthur Ogawa (mailto:arthur_ogawa at sbcglobal.net), -%%% commissioned by the American Institute of Physics. -%%% ", -%%% copyright = "Copyright (C) 2008 American Institute of Physics, -%%% distributed under the terms of the -%%% LaTeX Project Public License, see -%%% ftp://ctan.tug.org/macros/latex/base/lppl.txt -%%% ", -%%% address = "AIP Journal Program -%%% American Institute of Physics, -%%% Suite 1NO1, 2 Huntington Quadrangle, -%%% Melville, NY 11747 USA", -%%% telephone = "", -%%% FAX = "", -%%% email = "mailto colon tex at aip.org", -%%% codetable = "ISO/ASCII", -%%% keywords = "latex, page grid, main vertical list", -%%% supported = "yes", -%%% abstract = "aip substyle for REVTeX", -%%% docstring = "The checksum field above generated by ltxdoc", -%%% } -%</package> -% \fi -% -% \iffalse ltxdoc klootch -% The following references the \file{README} file, -% which contains basic information about this package. -% The contents of this file are generated when -% you typeset the programmer's documentation. -% Search on "{filecontents*}{README}" to locate it. -% \fi\input{README}% -% -% \subsection{Bill of Materials} -% -% Following is a list of the files in this distribution arranged -% according to provenance. -% -% \subsubsection{Primary Source}% -% One single file generates all. -%\begin{verbatim} -%aip.dtx -%\end{verbatim} -% -% \subsubsection{Generated by \texttt{latex aip.dtx}}% -% Typesetting the source file under \LaTeX\ -% generates the readme and the installer. -%\begin{verbatim} -%README aip.ins -%\end{verbatim} -% -% \subsubsection{Generated by \texttt{tex aip.dtx}}% -% Typesetting the installer generates -% the package files. -%\begin{verbatim} -%aip.rtx -%\end{verbatim} -% -% \subsubsection{Documentation}% -% The following are the online documentation: -% \begin{verbatim} -%aip.pdf -% \end{verbatim} -% -% \subsubsection{Auxiliary}% -% The following are auxiliary files generated -% in the course of running \LaTeX: -% \begin{verbatim} -%aip.aux aip.idx aip.ind aip.log aip.toc -% \end{verbatim} -% -% \section{Code common to all modules}% -% -% The following may look a bit klootchy, but we -% want to require only one place in this file -% where the version number is stated, -% and we also want to ensure that the version -% number is embedded into every generated file. -% -% Now we declare that -% these files can only be used with \LaTeXe. -% An appropriate message is displayed if -% a different \TeX{} format is used. -% \begin{macrocode} -%<*driver|package> -\NeedsTeXFormat{LaTeX2e}[1996/12/01]% -%</driver|package> -% \end{macrocode} -% As desired, the following modules all -% take common version information: -% \begin{macrocode} -%<package>\ProvidesFile{aip4-1.rtx}% -%<*driver> -\expandafter\ProvidesFile\expandafter{\jobname.dtx}% -%</driver> -% \end{macrocode} -% -% The following line contains, for once and for all, -% the version and date information. -% By various means, this information is reproduced -% consistently in all generated files and in the -% typeset documentation. -% \begin{macrocode} -%<*driver|package> -%<version> - [2010/07/25 4.1r AIP substyle for REVTeX]% \fileversion -%</driver|package> -% \end{macrocode} -% -% -% \section{The driver module \texttt{driver}} -% -% This module, consisting of the present section, -% typesets the programmer's documentation, -% generating the \file{.ins} installer and \file{README} as required. -% -% Because the only uncommented-out lines of code at the beginning of -% this file constitute the \file{driver} module itself, -% we can simply typeset the \file{.dtx} file directly, -% and there is thus rarely any need to -% generate the ``driver'' {\sc docstrip} module. -% Module delimiters are nonetheless required so that -% this code does not find its way into the other modules. -% -% The \enve{document} command concludes the typesetting run. -% -% \begin{macrocode} -%<*driver> -% \end{macrocode} -% -% \subsection{The Preamble} -% The programmers documentation is formatted -% with the \classname{ltxdoc} class with local customizations, -% and with the usual code line indexing. -% \begin{macrocode} -\documentclass{ltxdoc} -\RequirePackage{ltxdocext}% -\let\url\undefined -\RequirePackage[colorlinks=true,linkcolor=blue]{hyperref}% -\expandafter\ifx\csname package@font\endcsname\relax\else - \expandafter\expandafter - \expandafter\RequirePackage - \expandafter\expandafter - \expandafter{\csname package@font\endcsname}% -\fi -\gdef\lquote{`}\gdef\rquote{'}% -\CodelineIndex\EnableCrossrefs % makeindex -s gind.ist aip -\RecordChanges % makeindex -s gglo.ist -o aip.gls aip.glo -% \end{macrocode} -% -% \subsubsection{Docstrip and info directives} -% We use so many {\sc docstrip} modules that we set the -% \texttt{StandardModuleDepth} counter to 1. -% \begin{macrocode} -\setcounter{StandardModuleDepth}{1} -% \end{macrocode} -% The following command retrieves the date and version information -% from this file. -% \begin{macrocode} -\expandafter\GetFileInfo\expandafter{\jobname.dtx}% -% \end{macrocode} -% -% \subsection{The ``Read Me'' File} -% As promised above, here is the contents of the -% ``Read Me'' file. That file serves a double purpose, -% since it also constitutes the beginining of the -% programmer's documentation. What better thing, after -% all, to have appear at the beginning of the -% typeset documentation? -% -% A good discussion of how to write a ReadMe file can be found in -% Engst, Tonya, ``Writing a ReadMe File? Read This'' -% \emph{MacTech} October 1998, p. 58. -% -% Note the appearance of the -% \cmd\StopEventually\ command, which marks the -% dividing line between the user documentation -% and the programmer documentation. -% -% The usual user will not be asked to -% do a full build, not to speak -% of the bootstrap. -% Instructions for carrying these processes -% begin the programmer's manual. -% -%\changes{4.1b}{2008/08/06}{Beta candidate b} -% \begin{macrocode} -\begin{filecontents*}{README} -\title{% - The \classname{aip} substyle for REV\TeX% - \protect\thanks{% - \fileversion\ \copyright 2009 American Institute of Physics - % For version number and date, - % search on "\fileversion" in the .dtx file, - % or see the end of the README file. - }% -}% - -\author{% -Arthur Ogawa\thanks{mailto:arthur\_ogawa at sbcglobal.net}% -}% -\date{Version \fileversion, dated \filedate}% -\maketitle - -This file embodies the implementation of the -AIP journal substyles for APS's \revtex\ 4.1 document class -for electronic submissions to AIP journals. - -The distribution point for this work is -\url{http://authors.aip.org/REVTEX}. -The archive contains ready-to-Install files, documentation, and full source. - -This package is also distributed via CTAN: -\url{http://www.ctan.org/pub/tex-archive/macros/latex/contrib/aip}, and as a ready-to-install image as -\url{http://www.ctan.org/pub/tex-archive/install/macros/latex/contrib/aip.tds.zip}. - -The \classname{aip} package was commissioned by the American Institute of Physics -and is distributed under the terms of the \LaTeX\ Project Public License, -the same license under which all the portions of \LaTeX\ itself is distributed. -Please see \url{http://ctan.tug.org/macros/latex/base/lppl.txt} for details. - -To use this document class, you must have a working -\TeX\ installation equipped with \LaTeXe\ -and possibly pdftex and Adobe Acrobat Reader or equivalent. - -To install, retrieve the distribution, -unpack it into a directory on the target computer, -and move the file \file{aip.rtx} -into a location in your filesystem where it will be found by \LaTeX. - -To use, read the user documentation \file{auguide.pdf}. - -\tableofcontents - -\section{Overview}% -\revtex\ is a \LaTeXe\ document class, somewhat like a hybrid of -the standard \LaTeX\ \classname{book} and \classname{article} classes. - -This document class implements the AIP society and journal substyles: -the journals represent a set of mutually exclusive class options that, in this case, allow the -document class to address multiple journals within the AIP family. -This society is obtained with class option \classoption{aip}. - -\section{Processing Instructions} - -The package file \file{aip.rtx} -is generated from this file, \file{aip.dtx}, -using the {\sc docstrip} facility of \LaTeX -via |tex aip.dtx|. -The typeset documentation that you are now reading is generated from -the same file by typesetting it with \LaTeX\ or pdftex -via |latex aip.dtx| or |pdflatex aip.dtx|. - -\subsection{Build Instructions} - -You may bootstrap this suite of files solely from \file{aip.dtx}. -Prepare by installing \LaTeXe\ (and either tex or pdftex) on your computer, -then carry out the following steps: -\begin{enumerate} -\item -Within an otherwise empty directory, -typeset \file{aip.dtx} with \LaTeX\ or pdflatex; -you will obtain the typeset documentation you are now reading, -along with -the installer \file{aip.ins}, -and the file \file{README}. - -Note: you will have to run \LaTeX\ twice, then \file{makeindex}, then -\LaTeX\ again in order to obtain a valid index and table of contents. -\item -Now typeset \file{aip.dtx} with \TeX (not \LaTeX), -thereby generating the package file \file{aip.rtx}. -\item -Install \classname{aip.rtx} -by moving it to a location -in your filesystem where it will be found by \LaTeX, -like \file{tex/latex/aip}. -\item -Install \classname{aip.pdf} -by moving it to -\file{doc/latex/aip}. -\item -Using the \file{.dbj} information herein, -generate the needed \file{.bst} files and install them in -\file{bibtex/bst/aip}. -\end{enumerate} -\end{filecontents*} -% \end{macrocode} -% -% \subsection{The Document Body} -% -% Here is the document body, containing only a -% \cmd\DocInput\ directive---referring to this very file. -% This very cute self-reference is a common \classname{ltxdoc} idiom. -% \begin{macrocode} -\begin{document}% -\newcommand\revtex{REV\TeX}% -\expandafter\DocInput\expandafter{\jobname.dtx}% -% ^^A\PrintChanges -\end{document} -% \end{macrocode} -% -% \begin{macrocode} -%</driver> -% \end{macrocode} -% -% \section{AIP: A set of journal-specifc extensions to \revtex} -% -% To create a journal substyle, you create -% a \file{.rtx} file, in our case \file{aip.rtx}. -% Within that file, you override procedures and parameter assignments as you see fit. -% Ideally they will be generally applicable to all of that society's -% journals (see the file \file{aps.rtx} for a realization of this scheme). -% Also within that file, you include a -% section of code for each journal, that for JMP looks like: -% \begin{verbatim} -% \@ifx{\@journal\journal@jmp}{% -% <code specific to the JMP> -% }{}% -% \end{verbatim} -% -% \section{The \classoption{aip} class option: the \texttt{aip} module} -% The file \file{aip.rtx} is read in by the \classname{revtex4} document class -% if \cmd\@society\ has the value \classoption{aip}. -% -% Here, code specific to AIP journals appears. -% -% We first give some text entities (amounting to journal abbreviations), -% then some AIP-specific initialisations, -% then code for particular AIP journals. -% In the latter case, the choice is -% keyed off the macro \cmd\@journal. -% -% Note on \cmd\AtEndOfClass: -% this file, like all journal substyles, is read in at \cmd\AtEndOfClass\ time, -% so you should not use this command in this file. -% Note for \LaTeX\ developers: It would be an improvement in \LaTeX\ to -% \cmd\let\cmd\AtEndOfClass\ to something like \cmd\@firstofone. -% This change would be effected in \cmd\@onefilewithoptions. -% -% \begin{macrocode} -%<*package> -% \end{macrocode} -% -% \subsection{Defend Against Forseeable Errors}% -% Protect this file from being read in by anything but \revtex. -% \begin{macrocode} -\ifx\undefined\substyle@ext - \def\@tempa{% - \endinput - \GenericWarning{I must be read in by REVTeX! (Bailing out)}% - }% - \expandafter\else - \def\@tempa{}% - \expandafter\fi\@tempa - \class@info{RevTeX society AIP selected}% -% \end{macrocode} -% -% \subsection{Substyle Options}% -% -% Here are the class options relating to the AIP: -% \begin{macrocode} -\DeclareOption{jcp}{\change@journal{jcp}}% -\DeclareOption{pop}{\change@journal{pop}}% -\DeclareOption{rsi}{\change@journal{rsi}}% -\DeclareOption{jap}{\change@journal{jap}}% -\DeclareOption{apl}{\change@journal{apl}}% -\DeclareOption{cha}{\change@journal{cha}}% -\DeclareOption{pof}{\change@journal{pof}}% -\DeclareOption{bmf}{\change@journal{bmf}}% -\DeclareOption{rse}{\change@journal{rse}}% -\DeclareOption{jmp}{\change@journal{jmp}}% -% \end{macrocode} -% -% Option allowing for ``numerical author-year'' bibliography. -% \begin{macrocode} -\DeclareOption{author-numerical}{% - \@booleantrue\authoryear@sw - \@booleantrue\authornum@sw -}% -% \end{macrocode} -% -% Optionally allow article title in bibliography entries. -% A new switch is defined here: \cmd\aip@jtitx@sw\ signifies that -% the numbered style bibliography is to be prepared without article titles in @ARTICLE entries. -% Otherwise, such titles are incorporated if present in the \file{.bib} entry. -% By default, exclude the article titles. -% \begin{macrocode} -\DeclareOption{article-title}{% - \@booleanfalse\aip@jtitx@sw -}% -\@booleantrue \aip@jtitx@sw -% \end{macrocode} -% -% Establish default options for this society. -% -% \begin{macrocode} -\@booleanfalse\authoryear@sw -\@booleanfalse\authornum@sw -% \end{macrocode} -% -% \begin{macro}{\@bibdataout@init} -% \begin{macro}{\@bibdataout@aip} -% \changes{4.1o}{2010/02/12}{(AO, 580) Control .bst at run time.}% -% Procedure \cmd\@bibdataout@aip\ has the job of writing the control record into the -% job's \cmd\jobname\filename{.bib} file, where it will adjust the options to \filename{.bst} processing. -% It is installed into the initialization procedure \cmd\@bibdataout@init, and its meaning -% is set by the society (AIP) and journal. -% -% \begin{macrocode} -\appdef\@bibdataout@rev{\@bibdataout@aip}% -\def\@bibdataout@aip{% - \immediate\write\@bibdataout{% -% \end{macrocode} -% An entry that controls processing of the \filename{.bst} file has entry type \texttt{@CONTROL}. -% \begin{macrocode} - @CONTROL{% - aip41Control% -% \end{macrocode} -% Say whether we want long bibliography style (the default), or the abbreviated style. -% \begin{macrocode} - \longbibliography@sw{\true@sw}{\aip@jtitx@sw{\false@sw}{\true@sw}}% - {% - ,pages="1",title="0"% - }{% - ,pages="0",title=""% - }% - }% - }% -% \end{macrocode} -% Place a \cmd\citation\ into the auxiliary file corresponding to this entry. -% \begin{macrocode} - \if@filesw - \immediate\write\@auxout{\string\citation{aip41Control}}% - \fi -}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% For AIP, the preprint style \classoption{preprint} is the default. -% \begin{macrocode} -\@booleantrue\preprintsty@sw -% \end{macrocode} -% -% \begin{macro}{\showPACS@sw} -% \begin{macro}{\showKEYS@sw} -% If \cmd\showPACS@sw\ is true, print the PACS information in the title block, -% otherwise not. -% Similarly for \cmd\showKEYS@sw\ and the keywords. -% \begin{macrocode} -\@booleantrue\showPACS@sw -\@booleantrue\showKEYS@sw -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\refname} -% -% In reprint style only, we eliminate the head above the bibliography. -% \begin{macrocode} -\appdef\setup@hook{% - \preprintsty@sw{}{% - \let\refname\@empty - }% -}% -% \end{macrocode} -% \end{macro} -% -% \subsection{AIP Setup}% -% Here we define the default procedures for AIP journals. -% Individual AIP journals may override these definitions. -% -% \subsubsection{Running header and footer}% -% -% Page style for all AIP journals. -% We assert our own page style only if nobody else has done so. -% Users wishing to customize their documents will be able to invoke a \cmd\pagestyle\ -% command anywhere in the preamble. -%FIXME: \cmd\preprintsty@sw\ is defined? -% \begin{macrocode} -\appdef\setup@hook{% - \preprintsty@sw{% - \ps@preprint - }{% - \ps@article - }% -}% -% \end{macrocode} -% -% The spc says: ``Running title must be provided on title page'', -% and that journal classes 1b and 2 have no running title. -% \begin{macrocode} -\def\ps@preprint{% - \def\@oddhead{\@runningtitle\hfil}% - \def\@evenhead{\@runningtitle\hfil}% - \def\@oddfoot{\hfil\thepage\quad\checkindate\hfil}% - \def\@evenfoot{\hfil\thepage\quad\checkindate\hfil}% - \let\@mkboth\@gobbletwo - \let\sectionmark\@gobble - \let\subsectionmark\@gobble -}% -\def\ps@article{% - \def\@evenhead{\let\\\heading@cr\thepage\quad\checkindate\hfil\@runningtitle}% - \def\@oddhead{\let\\\heading@cr\@runningtitle\hfil\checkindate\quad\thepage}% - \def\@oddfoot{}% - \def\@evenfoot{}% - \let\@mkboth\@gobbletwo - \let\sectionmark\@gobble - \let\subsectionmark\@gobble -}% -\def\@runningtitle{\@shorttitle}% -% \end{macrocode} -% -% \subsubsection{Title block}% -% -% The specifics of the title block. -% Apply to all AIP journals; individual journals may override these settings. -% -% \begin{macro}{\titlepage} -% \begin{macrocode} -\renewenvironment{titlepage}{% - \let\wastwocol@sw\twocolumn@sw - \onecolumngrid - \newpage - \thispagestyle{titlepage}% - \c@page\z@% article sets this to one not zero??? -}{% - \wastwocol@sw{\twocolumngrid}{\newpage}% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@fnsymbol} -% On the title page, footnotes are lettered with right parenthesis: ``a)''. -% \begin{macrocode} -\let\@fnsymbol@latex\@fnsymbol -\let\@fnsymbol\@alph -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\adjust@abstractwidth} -% This procedure is used by many titlepage elements to indent on the left by a particular -% amount. The author list uses \cmd\frontmatter@authorformat\ to accomplish the same. -% \begin{macrocode} -\def\adjust@abstractwidth{% - \parindent1em\relax - \advance\leftskip.5in\relax - \@totalleftmargin\leftskip - \@afterheading\@afterindentfalse -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@abstractheading} -% AIP Journals all set the abstract head the same way, with no head. -% \begin{macrocode} -\def\frontmatter@abstractheading{}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@abstractfont} -% All AIP journals set the abstract body the same way. -% \begin{macrocode} -\def\frontmatter@abstractfont{% -%\small - \adjust@abstractwidth -}% -% \end{macrocode} -% \end{macro} -% -% All AIP journal preprints use separate titlepage and full-width abstract. -% \begin{macrocode} -\appdef\setup@hook{% - \preprintsty@sw{% - \@booleantrue\titlepage@sw -% \def\frontmatter@affiliationfont{\it}% - \let\section\section@preprintsty -% \let\@hangfrom@section\@hangfrom@section@preprintsty - \let\subsection\subsection@preprintsty - \let\subsubsection\subsubsection@preprintsty - }{}% -}% -% \end{macrocode} -% -% \begin{macro}{\frontmatter@authorformat} -% All AIP journals set the author list the same. -% The leading is 11.5 points, and -% there is 11.5 points of extra space above the first author line -% (which amounts to the same thing as 11.5 points extra below the title) -% for a total of 23 points base-to-base. -% -% \begin{macrocode} -\def\frontmatter@@indent{% - \skip@\@flushglue - \@flushglue\z@ plus.3\hsize\relax - \raggedright - \advance\leftskip.5in\relax - \@totalleftmargin\leftskip - \@flushglue\skip@ -}% -\def\frontmatter@authorformat{% - \frontmatter@@indent - \sffamily -%\advance\baselineskip\p@ -%\parskip11.5\p@\relax -}% -\renewcommand*\email[1][Electronic mail: ]{\begingroup\sanitize@url\@email{#1}}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@above@affilgroup} -% The default amount of space above affiliation. -% \begin{macrocode} -\def\frontmatter@above@affilgroup{% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@above@affiliation} -% \begin{macro}{\frontmatter@above@affiliation@script} -% The default amount of space above affiliation. -% \begin{macrocode} -\def\frontmatter@above@affiliation@script{% - \frontmatter@@indent -%\addvspace{3.5\p@}% -}% -\def\frontmatter@above@affiliation{% -}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\frontmatter@affiliationfont} -% All AIP journals set the affiliation the same. -% Like the author, but in italic. -% \begin{macrocode} -\def\frontmatter@affiliationfont{% - \frontmatter@@indent - \preprintsty@sw{}{\small}% - \it -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@collaboration@above} -% \begin{macrocode} -\def\frontmatter@collaboration@above{% -}% -% \end{macrocode} -% \end{macro} -% -% Set up the default AIP style for title block authors and affiliations. -% -% \begin{macro}{\frontmatter@setup} -% All AIP journals set the title page using the same font and size. -% However, justification varies for the title block elements, so -% we assert none here. -% \begin{macrocode} -\def\frontmatter@setup{% - \normalfont -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@title@above} -% \begin{macro}{\frontmatter@title@format} -% \begin{macro}{\frontmatter@title@below} -% All AIP journals set the article title 12 point Times Roman, bold, flush left. -% -% \begin{macrocode} -\def\frontmatter@title@above{\addvspace{6\p@}}% -\def\frontmatter@title@format{% - \preprintsty@sw{}{\Large}% - \sffamily - \bfseries - \raggedright - \parskip\z@skip -}% -\def\frontmatter@title@below{\addvspace{3\p@}}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\frontmatter@makefnmark} -% All AIP journals share this procedure for setting the titlepage footnote text: -% superior lowercase letter, with right parenthesis. -% \begin{macrocode} -\def\@author@parskip{3\p@}% -\@booleantrue\altaffilletter@sw -\def\frontmatter@makefnmark{% - \@textsuperscript{% - \normalfont\@thefnmark%( - )% - }% -}% -\def\frontmatter@authorbelow{% - \addvspace{3\p@}% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\affil@cutoff} -% We override \cmd\affil@cutoff\ to enforce the rule that, -% if a single affiliation appears on the title page, then -% no affiliation superscript at all is produced. -% \begin{macrocode} -\let\affil@cutoff\tw@ -% \end{macrocode} -% De awa. -% \end{macro} -% -% \begin{macro}{\frontmatter@RRAP@format} -% All AIP journals use the same format for the ``Received, Revised, etc.'' block on the title page. -% -% Change note: 11.5 points b-b from author/affiliation down to date. -% \begin{macrocode} -\def\frontmatter@RRAP@format{% - \addvspace{5\p@}% - \small - \raggedright - \advance\leftskip.5in\relax - \@totalleftmargin\leftskip -% \preprintsty@sw{}{\parskip.5ex\relax}% - \everypar{% - \hbox\bgroup(\@gobble@leavemode@uppercase%) - }% - \def\par{% - \@ifvmode{}{%( - \unskip)\egroup\@@par - }% - }% -}% -\def\punct@RRAP{;\egroup\ \hbox\bgroup}% -\def\@gobble@leavemode@uppercase#1#2{\expandafter\MakeTextUppercase}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@PACS@format} -% -% \begin{macrocode} -\def\frontmatter@PACS@format{% - \addvspace{11\p@}% -% \footnotesize - \adjust@abstractwidth - \parskip\z@skip - \samepage -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\frontmatter@keys@format} -% -% \begin{macrocode} -\def\frontmatter@keys@format{% -% \footnotesize - \adjust@abstractwidth - \samepage -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ps@titlepage} -% Title page style. Currently empty except for preprint header, -% which consists of all the \cmd\preprint\ arguments, -% stacked flush right at the right margin. -% \begin{macrocode} -\def\ps@titlepage{% - \def\@oddhead{% - \@runningtitle - \hfill - \produce@preprints\@preprint - }% - \let\@evenhead\@oddhead - \def\@oddfoot{% - \hb@xt@\z@{\byrevtex\hss}% - \hfil - \preprintsty@sw{\thepage}{}% - \quad\checkindate - \hfil - }% - \let\@evenfoot\@oddfoot -}% -\def\byrevtex{\byrevtex@sw{Typeset by REV\TeX and AIP}{}}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\produce@preprints} -% \begin{macrocode} -\def\produce@preprints#1{% - \preprint@sw{% - \vtop to \z@{% - \def\baselinestretch{1}% - \small - \let\preprint\preprint@count - \count@\z@#1\@ifnum{\count@>\tw@}{% - \hbox{% - \let\preprint\preprint@hlist - #1\setbox\z@\lastbox - }% - }{% - \let\preprint\preprint@cr - \halign{\hfil##\cr#1\crcr}% - \par - \vss - }% - }% - }{}% -}% -\def\preprint@cr#1{#1\cr}% -\def\preprint@count#1{\advance\count@\@ne}% -\def\preprint@hlist#1{#1\hbox{, }}% -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Lead-in paragraph}% -% -% The \env{Lead-in paragraph} environment formats the AIP ``lead paragraph''. -% To avoid introducing new syntax, we take over the \env{quotation} environment -% until the first \cmd\section\ (or other sectioning command) appears. -% -% \begin{macrocode} -\newenvironment{Lead@inParagraph}{% - \par - \bfseries - \@afterheading\@afterindentfalse -}{% - \par - \hb@xt@\hsize{\hfil\leaders\hrule\hfil\leaders\hrule\hfil\hfil}% -}% -% \end{macrocode} -% At the beginning of the document temporarily change the meaning of -% the \env{quotation} environment, restoring it once the first sectioning -% command is given. -% \begin{macrocode} -\appdef\frontmatter@init{% - \let@environment{quotation@ltx}{quotation}% - \let@environment{quotation}{Lead@inParagraph}% -}% -\appdef\@startsection@hook{% - \let@environment{quotation}{quotation@ltx}% -}% -% \end{macrocode} -% -% \subsubsection{Stacked Heads}% -% All AIP journals put a period (.), followed by quad space, after the section number. -% Also, no hanging section number. -% \begin{macrocode} -\def\@seccntformat#1{\csname the#1\endcsname.\quad}% -\def\@hang@from#1#2#3{#1#2#3}% -% \end{macrocode} -% -% Note that in the following, we wish to set the section head uppercase, so we use -% David Carlisle's \cmd\MakeTextUppercase. However, because this procedure effectively -% parses its argument (looking for things to \emph{not} translate), it has to be invoked -% in such a way that the argument of the \cmd\section\ command is passed to it as its -% own argument. -% -% To accomplish this, we use the \cmd\@hangfrom@\ hook, which was developed for this -% purpose. -% -% \begin{macrocode} -\def\section{% - \@startsection - {section}% - {1}% - {\z@}% - {0.8cm \@plus1ex \@minus .2ex}% - {0.5cm}% - {% - \normalfont - \small - \sffamily - \bfseries - \raggedright - }% -}% -\def\@hangfrom@section#1#2#3{\@hangfrom{#1#2}\MakeTextUppercase{#3}}% -\def\@hangfroms@section#1#2{#1\MakeTextUppercase{#2}}% -% \end{macrocode} -% -% See, e.g., BMF\_044101\_1 (1) or BMF\_044103\_1 (1) -% \begin{macrocode} -\def\subsection{% - \@startsection - {subsection}% - {2}% - {\z@}% - {.8cm \@plus1ex \@minus .2ex}% - {.5cm}% - {% - \normalfont - \small - \sffamily - \bfseries - \raggedright - }% -}% -% \end{macrocode} -% -% See, e.g., BMF\_044104\_1 (1), JMP\_123520\_1 (48), -% \begin{macrocode} -\def\subsubsection{% - \@startsection - {subsubsection}% - {3}% - {\z@}% - {.8cm \@plus1ex \@minus .2ex}% - {.5cm}% - {% - \normalfont - \small - \sffamily - \bfseries - \itshape - \raggedright - }% -}% -% \end{macrocode} -% -% \subsubsection{Runin Heads}% -% \begin{macrocode} -\def\paragraph{% - \@startsection - {paragraph}% - {4}% - {\parindent}% - {\z@}% - {-1em}% - {\normalfont\normalsize\itshape}% -}% -% \end{macrocode} -% -% \begin{macrocode} -\def\subparagraph{% - \@startsection - {subparagraph}% - {5}% - {\parindent}% - {3.25ex \@plus1ex \@minus .2ex}% - {-1em}% - {\normalfont\normalsize\bfseries}% -}% -% \end{macrocode} -% -% \begin{macro}{\section@preprintsty} -% \begin{macro}{\subsection@preprintsty} -% \begin{macro}{\subsubsection@preprintsty} -% Here are the formatting procedures specific to the preprint style; -% the only difference is that the heads are flush left instead of centered. -% -% \begin{macrocode} -\def\section@preprintsty{% - \@startsection - {section}% - {1}% - {\z@}% - {0.8cm \@plus1ex \@minus .2ex}% - {0.5cm}% - {% - \normalfont - \bfseries - \raggedright - }% -}% -%\def\@hangfrom@section@preprintsty#1#2#3{\@hangfrom{#1#2}\MakeTextUppercase{#3}}% -% \end{macrocode} -% \begin{macrocode} -\def\subsection@preprintsty{% - \@startsection - {subsection}% - {2}% - {\z@}% - {.8cm \@plus1ex \@minus .2ex}% - {.5cm}% - {% - \normalfont - \bfseries - \raggedright - }% -}% -% \end{macrocode} -% \begin{macrocode} -\def\subsubsection@preprintsty{% - \@startsection - {subsubsection}% - {3}% - {\z@}% - {.8cm \@plus1ex \@minus .2ex}% - {.5cm}% - {% - \normalfont -% \small - \itshape\bfseries - \raggedright - }% -}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% For examples of -% \env{theorem}, \env{proposition}, \env{lemma}, \env{remark}, \env{corollary}, \env{example}, -% and \env{proof} (with optional title), -% using independent numbering for each class, -% and with numbered and roman lists therein, -% see JMP\_122901\_1 (48). -% -% For theorems, etc, numbered by section, (and with theorems in the appendix) -% but equations numbered throughout, -% see JMP\_123301\_1 (48). -% -% For a (roman) list in text, theorem, and proof, -% see JMP\_123514\_1 (48). -% -% For numbered list in text, -% and equations numbered by section, -% see JMP\_123518\_1 (48). -% -% All AIP journals use frontmatter footnotes by default. -% \begin{macrocode} -\let\frontmatter@footnote@produce\frontmatter@footnote@produce@footnote -% \end{macrocode} -% -% -% \subsubsection{Table of Contents}% -% The toc will itself make an entry in the toc, -% but we temporarily turn off toc formatting for the duration. -% \begin{macrocode} -\def\@pnumwidth{1.55em} -\def\@tocrmarg {2.55em} -\def\@dotsep{2} -\def\ltxu@dotsep{4.5pt} -\setcounter{tocdepth}{3} -% \end{macrocode} -% -% \begin{macrocode} -\def\tableofcontents{% - \addtocontents{toc}{\string\tocdepth@munge}% - \print@toc{toc}% - \addtocontents{toc}{\string\tocdepth@restore}% -}% -% \end{macrocode} -% -% \begin{macrocode} -\def\tocdepth@munge{% - \let\l@section@saved\l@section - \let\l@section\@gobble@tw@ -}% -\def\@gobble@tw@#1#2{}% -% \end{macrocode} -% -% \begin{macrocode} -\def\tocdepth@restore{% - \let\l@section\l@section@saved -}% -% \end{macrocode} -% -% \begin{macrocode} -\def\l@part#1#2{\addpenalty{\@secpenalty}% - \begingroup - \set@tocdim@pagenum{#2}% -% \@tempdima 3em % - \parindent \z@ - \rightskip\tocleft@pagenum plus 1fil\relax - \skip@\parfillskip\parfillskip\z@ - \addvspace{2.25em plus\p@}% - \large \bf % - \leavevmode\ignorespaces#1\unskip\nobreak\hskip\skip@ - \hb@xt@\rightskip{\hfil\unhbox\z@}\hskip-\rightskip\hskip\z@skip - \par - \nobreak % - \endgroup -}% -% \end{macrocode} -% -% \begin{macro}{\l@section} -% Determine which TOC elements are automatically indented. -% \begin{macrocode} -\def\tocleft@{\z@}% -\def\tocdim@min{5\p@}% -\def\l@section{% - \l@@sections{}{section}% Implicit #3#4 -}% -\def\l@f@section{% - \addpenalty{\@secpenalty}% - \addvspace{1.0em plus\p@}% - \bf -}% -\def\l@subsection{% - \l@@sections{section}{subsection}% Implicit #3#4 -}% -\def\l@subsubsection{% - \l@@sections{subsection}{subsubsection}% Implicit #3#4 -}% -\def\l@paragraph#1#2{}% -\def\l@subparagraph#1#2{}% -% \end{macrocode} -% \end{macro} -% -% Activate the auto TOC processing. -% \begin{macrocode} -\let\toc@pre\toc@pre@auto -\let\toc@post\toc@post@auto -% \end{macrocode} -% -% \begin{macrocode} -\def\listoffigures{\print@toc{lof}}% -\def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}} -% \end{macrocode} -% -% \begin{macrocode} -\def\listoftables{\print@toc{lot}}% -\let\l@table\l@figure -% \end{macrocode} -% -% \subsubsection{Default column bottom}% -% All AIP journal styles have flush bottoms. -% -% \begin{macrocode} -\@booleanfalse\raggedcolumn@sw -% \end{macrocode} -% -% -% \subsubsection{Table alignment style}% -% -% \begin{macro}{\tableft@skip@float} -% \begin{macro}{\tabmid@skip@float} -% \begin{macro}{\tabright@skip@float} -% \begin{macro}{\array@row@pre@float} -% \begin{macro}{\array@row@pst@float} -% All AIP publications have the same table specification: -% Scotch rules above and below, centered in column. -% \begin{macrocode} -\def\tableft@skip@float{\z@ plus\hsize}% -\def\tabmid@skip@float{\@flushglue}% -\def\tabright@skip@float{\z@ plus\hsize}% -\def\array@row@pre@float{\hline\hline\noalign{\vskip\doublerulesep}}% -\def\array@row@pst@float{\noalign{\vskip\doublerulesep}\hline\hline}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% \subsubsection{Footnote formatting}% -% We customize the formatting of footnotes for all AIP journals. -% \begin{macro}{\@makefntext} -% \begin{macrocode} -\def\@makefntext#1{% - \def\baselinestretch{1}% - \leftskip1em% - \parindent1em% - \noindent - \nobreak\hskip-\leftskip - \hb@xt@\leftskip{% - \hss\@makefnmark\ % - }% - #1% - \par -}% -% \end{macrocode} -% \end{macro} -% -% -% \subsubsection{Appendix}% -% \begin{macro}{\appendix} -% \begin{macro}{\@hangfrom@appendix} -% \begin{macro}{\@hangfroms@appendix} -% \begin{macro}{\@appendixcntformat} -% \begin{macrocode} -\prepdef\appendix{% - \par - \let\@hangfrom@section\@hangfrom@appendix -%\let\@hangfroms@section\@hangfroms@appendix - \let\@sectioncntformat\@appendixcntformat -}% -\def\@hangfrom@appendix#1#2#3{% - #1% - \@if@empty{#2}{% - #3% - }{% - #2\@if@empty{#3}{}{:\ #3}% - }% -}% -\def\@hangfroms@appendix#1#2{% - #1#2% -}% -\def\@appendixcntformat#1{\appendixname\ \csname the#1\endcsname}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Bibliography}% -% -% Customize the \revtex\ for the AIP society. -% this task requires three components: -% the \BibTeX\ \file{aipnum.bst} and \file{aipauth.bst} style files, -% customizing code for \file{natbib}, and -% customizations of the \env{thebibliography} environment. -% -% \begin{macro}{\@bibstyle} -% Define the argument of the \cmd\bibliographystyle\ command. -% The user must have installed a \file{.bst} file of the corresponding name. -% This file will then be used by \BibTeX\ when compiling the document's \file{.bbl} file. -% -% The default bibliography style for the AIP journal substyles are \file{aipnum.bst} and \file{aipauth.bst}. -% To generate them, use \classname{custom-bib} version 4.21 or later. -% Run the \file{.bst} generator, \file{makebst.tex}, and -% accept all defaults, with the following exceptions: -% -% \begin{enumerate} -% \item -% ORDERING OF REFERENCES: c: seq-no (references in order of Citation); -% \item -% AUTHOR NAMES: i: nm-init,ed-au (Initials + surname); -% \item -% NUMBER OF AUTHORS: l: max 12, min 12 (there will be three prompts total); -% \item -% TYPEFACE FOR AUTHORS IN LIST OF REFERENCES: u: nmft,nmft-def (User defined author font); -% \item -% FONT FOR FIRST NAMES: u: fnm-def (First names in user defined font); -% \item -% EDITOR NAMES IN INCOLLECTION ETC: a: nmfted (Editors incollection like authors); -% \item -% DATE FORMAT: p: yr-par (Date in parentheses); -% \item -% SUPPRESS MONTH: x: xmth (Date is year only); -% \item -% TITLE OF ARTICLE: i: tit-it (Title italic) -% \item -% ARTICLE TITLE PRESENT: x: jtit-x (No article title); -% \item -% JOURNAL NAME FONT: r: jttl-rm (Journal title normal); -% \item -% TECHNICAL REPORT TITLE: b: trtit-b (Tech. report title like books); -% \item -% JOURNAL VOLUME: b: vol-bf (Volume bold); -% \item -% VOLUME PUNCTUATION: c: volp-com (Volume with comma); -% \item -% PAGE NUMBERS: f: jpg-1 (Only start page number); -% \item -% JOURNAL NAME PUNCTUATION: x: jnm-x (Space after journal); -% \item -% PUBLISHER IN PARENTHESES: d: pub-date (Publisher and date in parentheses); -% \item -% PUBLISHER POSITION: p: pre-pub (Publisher before chapter, pages); -% \item -% ISBN NUMBER: isbn: (Include ISBN for books, booklets) -% \item -% ISSN NUMBER: issn: (Include ISSN for periodicals) -% \item -% EDITOR IN COLLECTIONS: b: edby (Booktitle, edited by \dots); -% \item -% PUNCTUATION BETWEEN SECTIONS (BLOCKS): c: blk-com (Comma between blocks); -% \item -% ABBREVIATE WORD `PAGES': a: pp (`Page' abbreviated); -% \item -% ABBREVIATE WORD `EDITORS': a: ed (`Editor' abbreviated); -% \item -% OTHER ABBREVIATIONS: a: abr (Abbreviations); -% \item -% ABBREVIATION FOR `EDITION': a: ednx (`Edition' abbreviated as `ed'); -% \item -% EDITION NUMBERS: n: ord (Numerical editions); -% \item -% STORED JOURNAL NAMES: a: jabr (Abbreviated journal names); -% \item -% FONT OF `ET AL': i: etal-it (Italic et al); -% \item -% ADDITIONAL REVTeX DATA FIELDS: r: revdata, eprint, url, url-blk (Include REVTeX data fields collaboration, eid, eprint, numpages, url) -% \item -% NEW FONT SELECTION SCHEME: n: nfss (NFSS); -% \item -% ADDITIONAL REVTeX DATA FIELDS: y: revdata (additional data fields); -% \item -% REFERENCE COMPONENT TAGS: y: reference component tags; -% \item -% URL ADDRESS: n: URL as note; -% \end{enumerate} -% -% A file \file{aipnum.dbj} file equivalent to the following should result: -% \begin{verbatim} -%\input docstrip -%\preamble -%---------------------------------------- -%*** REVTeX-compatible aipnum4-1.bst 2009-10-08 *** -%\endpreamble -%\postamble -%End of customized bst file -%\endpostamble -%\keepsilent -%\askforoverwritefalse -%\def\MBopts{\from{merlin.mbs}{% -% head,\MBopta} -%\from{physjour.mbs}{\MBopta} -%\from{geojour.mbs}{\MBopta} -%\from{photjour.mbs}{\MBopta} -%\from{merlin.mbs}{tail,\MBopta}} -%\def\MBopta{% -% lang,%: Use language field to switch hyphenation patterns for title -% pres,pres-bf,%: Presentation, speaker bold face -% seq-no,%: Citation order (unsorted, like unsrt.bst) -% vonx,%: Sort without von part (de la Maire after Mahone) -% nm-init,ed-au,%: Initials + surname (J. F. Smith) -% nmft,nmft-def,%: User defined author font (\bibnamefont) -% fnm-def,%: First names in user defined font (\bibfnamefont) -% nmfted,%: Editors incollection like authors font -% nmand-rm,%: `And' in normal font (JONES and JAMES) -% lab,lab-def,%: User defined citation font (\citenamefont) -% and-rm,%: Cited `and' in normal font -% yr-par,%: Date in parentheses as (May 1993) -% date-nil-x,%: If date is empty, then do not produce the surrounding punctuation (parens, brackets, colon, comma) -% tit-qq,%: Title and punctuation in double quotes (``Title,'' ..) -% inproceedings-chapter,%: produce pages after chapter, just as in InBook -% jtit-x,%: Title is ignored -% inproceedings-chapter,%: produce pages after chapter just as in InBook -% article-booktitle,%: format booktitle -% article-series,%: article can has series -% jttl-rm,%: Journal name normal font -% journal-address,%: Include address field (in parentheses) along with journal name -% book-bt,%: Field `booktitle', or if absent field `title', is book title -% thesis-title-o,%: Title is optional: no warning issued if empty -% techreport-institution-par,%: format tech report institution like book publisher -% vol-bf,%: Volume bold as {\bf vol}(num) -% vnum-x,%: Journal vol, without number as 34 -% volp-com,%: Volume with comma as vol(num), ppp -% jpg-1,%: Only start page number -% book-editor-booktitle,%: Book permits empty author, produces title before editor in this case -% inbook-editor-booktitle,%: Allow using both title/booktitle, both author/editor -% bookaddress,%: Italic booktitle followed by bookaddress in roman -% num-xser,%: Allows number without series and suppresses word "number" -% number-cap,%: Capitalize word `number' as: "Number 123" -% chapter-cap,%: Capitalize word `chapter' as: `Chapter 42' -% series-number,%: Series number as: `Springer Lecture Notes No. 125' -% numser-booktitle,%: After book title and conference address, and before editors -% ser-vol,%: Series, vol. 23 -% ser-rm,%: format series roman , even when used with volume -% volume-cap,%: Capitalize word `volume', as: `Volume 7 in Lecture Series' -% ser-ed,%: Series and volume after booktitle and before editors -% jnm-x,%: Space after journal name -% pg-bk,book-chapter-pages,%: As chapter and page: chapter 42, page 345 -% pub-date,%: Publisher with address and date in parentheses (Oxford, 1994) -% ay-empty-pub-parens-x,%: eliminate parentheses altogether if nothing inside -% pre-pub,%: Publisher before volume, chapter, pages -% pre-edn,%: Edition before publisher -% pre-pub,pre-edn,%: Edition, publisher, volume, chapter, pages -% isbn,%: Include ISBN for books, booklets, etc. -% issn,%: Include ISSN for periodicals -% doi-link,doi,%: Doi forms a link to the publication, anchored to the volume or title -% edby,%: In booktitle, edited by .. (where .. is names) -% blk-com,%: Comma between blocks -% fin-endbibitem,%: Command at end instead of period -% pp,%: `Page' abbreviated as p. or pp. -% ed,%: `Editor' abbreviated as ed. or eds. -% abr,%: Abbreviations of such words -% ednx,%: `Edition' abbreviated as `ed' -% ord,%: Numerical editions as 1st, 2nd, 3rd, etc -% jabr,%: Abbreviated journal names -% etal-it,%: Italic et al -% revdata,eprint,url,url-blk,translation,%: Include REVTeX data fields collaboration, eid, eprint, archive, url, translation -% SLACcitation,%: Produce SLACcitation field -% numpages-x,%: Do not include numpages field -% url,url-prefix-x,%: URL without prefix (default: `URL ') -% bibinfo,%: Reference component tags like \bibinfo in the content of \bibitem -% bibfield,%: Element tags like \bibfield in the content of \bibitem -% nfss,%: Use LaTeX commands which may not work with Plain TeX -%,{% -% }} -%\generate{\file{aipnum4-1.bst}{\MBopts}} -%\endbatchfile -% \end{verbatim} -% -% Between the two files \file{aipnum.dbj} and \file{aipauth.dbj}, -% the differences are limited: -% \file{aipnum.dbj} has two lines lacking in \file{aipauth.dbj}: -% \begin{verbatim} -% seq-no,%: Citation order (unsorted, like unsrt.bst) -% nm-init,ed-au,%: Initials + surname (J. F. Smith) -% \end{verbatim} -% thus, the ``numbered citation'' bibliography is sorted by citation order, and -% the names are give first inital, then last name. -% -% Likewise, \file{aipauth.dbj} has one line lacking in \file{aipnum.dbj}: -% \begin{verbatim} -% nm-rev,%: Surname + comma + initials (Smith, J. F.) -% \end{verbatim} -% Thus, the ``author-year'' bibliography is sorted by author name, and -% names are given last name first, followed by initials. -% -% We ensure that the journal substyle has the first word -% in the matter by installing the (default) AIP code -% later on (see Section~\ref{sec:aip-defaults}). -% \end{macro} -% -% \begin{macro}{\pre@bibdata} -% -% Set up to write endnotes to a .bib file; its data will be incorporated into the bibliography. -% \begin{macrocode} - \def\pre@bibdata{\jobname\bibdata@app}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\bibsection} -% We define the sectioning command to use when starting the bibliography -% (we use \cmd\refname). -% \begin{macrocode} -\def\refname{References}% -\def\rtx@bibsection{% - \@ifx@empty\refname{% - \par\vspace{6\p@ plus 6\p@}% - }{% -% \end{macrocode} -% The following line has been commented out: -% \begin{verbatim} -% \let\@hangfroms@section\@hang@froms -% \end{verbatim} -% \begin{macrocode} - \expandafter\section\expandafter*\expandafter{\refname}% - \@nobreaktrue - }% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\bibpreamble} -% \begin{macro}{\bibsep} -% \begin{macro}{\newblock} -% \begin{macrocode} -\let\bibpreamble\@empty -\appdef\setup@hook{% - \bibsep\z@\relax -}% -\def\newblock{\ }% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\bibfont} -% We define the font switch that applies to the body of the bibliography. -% -% \begin{macrocode} -\appdef\setup@hook{% - \def\bibfont{% - \preprintsty@sw{}{\footnotesize}% - \@clubpenalty\clubpenalty - \labelsep\z@ - }% -}% -\let\place@bibnumber\place@bibnumber@sup -% \end{macrocode} -% \end{macro} -% -% -% \subsubsection{Index}% -% \begin{macrocode} -\newenvironment{theindex}{% - \columnseprule \z@ - \columnsep 35\p@ - \c@secnumdepth-\maxdimen - \onecolumngrid@push - \section{\indexname}% - \thispagestyle{plain}% - \parindent\z@ - \parskip\z@ plus.3\p@\relax - \let\item\@idxitem - \onecolumngrid@pop -}{% -}% -% -\def\@idxitem{\par\hangindent 40\p@} -% -\def\subitem{\par\hangindent 40\p@ \hspace*{20\p@}} -% -\def\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}} -% -\def\indexspace{\par \vskip 10\p@ plus5\p@ minus3\p@\relax} -% \end{macrocode} -% -% -% \subsubsection{Typesize Processing}% -% The formatting specification for the preprint option is: -% Times Roman 12 pt, double spacing, with 1-inch margins on letter paper. -% Paragraphs indented ``five spaces''. -% Display math on standard indent, with equation number flush right in parenthesis, with subequations roman. -% -% That for reprint option is to format similar to the printed journal; with most journals -% set (approximately analyzed) 10-point, 2-column grid, letter paper. -% \begin{macrocode} -\expandafter\def\csname rtx@aip10pt\endcsname{% - \let\@currname@class\@currname - \def\@currname{aps10pt\substyle@post}% - \class@info{Reading file \@currname.\substyle@ext}% - \input{\@currname.\substyle@ext}% - \let\@currname\@currname@class - \class@info{Overriding 10pt}% - \aipreprint -}% -\expandafter\def\csname rtx@aip11pt\endcsname{\csname rtx@aip12pt\endcsname}% -\expandafter\def\csname rtx@aip12pt\endcsname{% - \let\@currname@class\@currname - \def\@currname{aps12pt\substyle@post}% - \class@info{Reading file \@currname.\substyle@ext}% - \input{\@currname.\substyle@ext}% - \let\@currname\@currname@class - \class@info{Overriding 12pt}% - \aippreprint -}% -% \end{macrocode} -% -% \begin{macro}{\today} -% Procedure \cmd\today\ is used in the article class, but not in -% this document class. -% \begin{macrocode} -\def\today{% - \number\day\space - \ifcase\month - \or January\or February\or March\or April\or May\or June% - \or July\or August\or September\or October\or November\or December% - \fi\space - \number\year -}% -% \end{macrocode} -% \end{macro} -% -% \subsection{A. Running Title} -% User-provided running title \cmd\@shorttitle\ to be set. -% -% \subsection{B. Equation numbering, figure and table numbering} -% Equations can be numbered throughout, or by section, with appendix equations prepended by the appendix label. -% Figures and tables are numbered throughout. -% -% -% \subsection{C. Title} -% Title page may break above abstract, within author list. -% Title notes are signified by superior letter followed by right parenthesis. -% -% \subsection{D. Author footnote} -% Set short line above these footnotes. -% -% \subsection{E. Author} -% Class option \classoption{superscriptaddress} is standard. -% \begin{macrocode} - \clo@superscriptaddress -% \end{macrocode} -% -% \subsection{F. Affiliations} -% Set italic. -% -% \subsection{G. Received date} -% -% -% \subsection{H. Abstract} -% Single paragraph, no indent. -% -% \subsection{J. Lead Paragraph} -% Set boldface, flush left before main text, single paragraph. -% Separated from text by a short centered rule. -% -% \subsection{K. Headings} -% Use labels: ROMAN, LETTER, arabic, letter. -% Set ALLCAPS, boldface; Initial cap, boldface; Initial cap, bold-italic; Initial cap, italic. -% -% Theorem, proof title followed by colon. Follow author. -% -% \subsection{L. Text Footnotes} -% Not permitted; use endnotes. -% -% \subsection{M. Citations and Bibliography} -% Numerical \filename{aipnum.bst}, author-year \filename{aipauth.bst}, and numbered author-year \filename{aipnumauth.bst} are the available choices. -% Numerical is standard, with all styles permitted in journal classes 3a and 4b. -% -% -% \subsection{N. References} -% -% Article Title usage: -% -% Article title required in all journals with "unpublished", "to be published", "in press" and "submitted" refs. -% -% Exceptions: -% -% Journal classes 1a,1b,2,4a: -% -% Article title not allowed in published references, except in the case of "in press" or submitted" (see sample references below). -% -% Journal class 3a: -% -% Article title allowed but not required in author-year references (use must be consistent within a single manuscript). -% -% Journal class 3b: -% -% Article title required in all journal references and report references. -% -% Journal class 4b: -% -% Article title allowed in journal references in author-year mode. -% -% \subsection{O. Examples of Numerical References} -% -% -% \subsection{P. References in Author-year mode} -% -% -% \subsection{Q. Numbered Author-year References} -% -% -% \subsection{R. Tables} -% Placed within text (floated), labeled with Roman numeral. -% -% Table caption placed above table, followed by space, -% two double lines, space, table column headings, space, -% single line, table contents, two double lines. -% -% Footnotes labeled with superior lower-case letter, set below table contents. -% -% \subsection{S. Figures} -% Placed within text (floated), labeled with arabic numbers. -% -% Caption set below figure. A citation to be set inline, not superscripted. -% -% \subsection{Society defaults}% -% -% After this society file is read in, we will process the -% \cmd\@journal- and \cmd\@pointsize-specific code. -% Here we define the defaults. -% -% We select \textbf{Chaos} as the default journal substyle, because it is -% the most permissive in terms of bibliography and citation style, -% and it is formatted in two column in the reprint style. -% -% \begin{macrocode} -\def\@journal@default{cha}% -\def\@pointsize@default{12}% -% \end{macrocode} -% -% \subsection{Journal-Specific Code}% -% -% For AIP journals, we supply code specific to JCP, POP, RSI, JAP, APL, CHA, POF, BMF, RSE, JMP. -% -% \subsubsection{\classoption{jcp}}% -%A member of the journal class 1a. -% \begin{macrocode} -\def\rtx@aipjcp{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 1a uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw -% \end{macrocode} -% -% End of \classoption{jcp} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{pop}}% -%A member of the journal class 1a. -% \begin{macrocode} -\def\rtx@aippop{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 1a uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw -% \end{macrocode} -% -% End of \classoption{pop} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{rsi}}% -%A member of the journal class 1a. -% \begin{macrocode} -\def\rtx@aiprsi{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 1a uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw -% \end{macrocode} -% -% End of \classoption{rsi} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{jap}}% -%Sole member of the journal class 1b. -% -% No running title. -% \begin{macrocode} -\def\rtx@aipjap{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 1b uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw - \let\@runningtitle\@empty -% \end{macrocode} -% -% End of \classoption{jap} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{apl}}% -%Sole member of the journal class 2. -% -% No running title. -% \begin{macrocode} -\def\rtx@aipapl{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 2 uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw - \let\@runningtitle\@empty -% \end{macrocode} -% -% End of \classoption{apl} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{cha}}% -%Sole member of the journal class 3a. -% \begin{macrocode} -\def\rtx@aipcha{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Article titles are allowed. -% \begin{macrocode} - \@booleanfalse\aip@jtitx@sw -% \end{macrocode} -% -% End of \classoption{cha} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{pof}}% -%Sole member of the journal class 3b. -% \begin{macrocode} -\def\rtx@aippof{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 3b uses the (superscript) numerical citation style by default. -% Article titles are required, so we include them if available, -% but if absent, we can do no more than make a warning in the \file{.blg}. -% \begin{macrocode} - \@booleanfalse\authoryear@sw - \@booleanfalse\aip@jtitx@sw -% \end{macrocode} -% -% End of \classoption{pof} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{bmf}}% -% A member of the journal class 4a, -% the Biomicrofluidics journal is single column. -% \begin{macrocode} -\def\rtx@aipbmf{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 4a uses the (superscript) numerical citation style by default. -% Journal is formatted in a single column. -% \begin{macrocode} - \@booleanfalse\authoryear@sw - \@booleanfalse\twocolumn@sw -% \end{macrocode} -% -% End of \classoption{bmf} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{rse}}% -%A member of the journal class 4a. -% \begin{macrocode} -\def\rtx@aiprse{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Journal class 4a uses the (superscript) numerical citation style by default. -% \begin{macrocode} - \@booleanfalse\authoryear@sw -% \end{macrocode} -% -% End of \classoption{rse} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsubsection{\classoption{jmp}}% -% Sole member of the journal class 4b, Journal of Mathematical Physics is single column. -% For an example of \env{itemize}, see JMP\_122901\_1 (48). -% \begin{macrocode} -\def\rtx@aipjmp{% - \typeout{Using journal substyle \@journal.}% -% \end{macrocode} -% Article titles are allowed. -% Journal is formatted in a single column. -% \begin{macrocode} - \@booleanfalse\aip@jtitx@sw - \@booleanfalse\twocolumn@sw -% \end{macrocode} -% -% End of \classoption{jmp} code. -% \begin{macrocode} -}% -% \end{macrocode} -% -% \subsection{Establish AIP Defaults\label{sec:aip-defaults}} -% -% \begin{macro}{\footinbib@sw} -% All AIP journals invoke the \classoption{footinbib} option. -% \begin{macrocode} -\@booleantrue\footinbib@sw -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\place@bibnumber} -% \begin{macro}{\@bibstyle} -% \begin{macro}{\bibpunct} -% We install code that will -% govern the style in which \cmd\cite\ commands are -% formatted, -% select the presentation for \cmd\bibitem s -% and control the \BibTeX\ processing. -% -% Note that a journal substyle may override these settings. -% Likewise, document preamble may itself invoke \cmd\bibpunct\ or \cmd\bibliographystyle, -% thereby overriding these settings and those of the journal substyle. -% -% The numbered citations of \file{aipnum} and \file{aipauthnum} -% are compatible with \classoption{footinbib} and -% the compression and coalescing features of \classname{natbib}, -% while \file{aipauth}'s author-year citations are not. -% Therefore, we de-select such options if we are selecting author-year citations. -% -% Note on \classname{natbib} presets: -% \file{aipnum} and \file{aipauthnum} uses the Chicago \cmd\bibpunct\ style; -% while \file{aipauth} uses that of Nature. -% -% Note on \cmd\NAT@mcite: if not using numerical citations, we set \cmd\NAT@mcite\ -% to a lower value, to turn off the mcite semantics of \classname{natbib}. -% \begin{macrocode} -\let\place@bibnumber\place@bibnumber@sup -\appdef\setup@hook{% - \authoryear@sw{% - \aip@jtitx@sw{% - \def\@bibstyle{aipauth\substyle@post}% - }{% - \def\@bibstyle{aipauth\substyle@post}% - }% - \authornum@sw{% - \bibpunct{}{}{,}{s}{}{\textsuperscript{,}}% - \let\onlinecite\rev@citealpnum - }{% - \bibhang10\p@ - \bibpunct{(%) - }{%( - )}{; }{a}{,}{,}% - \@booleanfalse\footinbib@sw - \let\NAT@mcite\@ne - \let\NAT@sort\z@ - \def\NAT@cmprs{\z@}% - \let\NAT@def@citea\rtx@def@citea - \let\NAT@def@citea@close\rtx@def@citea@close - }% - }{% - \aip@jtitx@sw{% - \def\@bibstyle{aipnum\substyle@post}% - }{% - \def\@bibstyle{aipnum\substyle@post}% - }% - \bibpunct{}{}{,}{s}{}{\textsuperscript{,}}% - \let\onlinecite\rev@citealpnum - }% -}% -\def\make@footnote@endnote{% - \footinbib@sw{% - \authoryear@sw{\authornum@sw{\false@sw}{\true@sw}}{\false@sw}% - {}{% - \ltx@footnote@push - \def\thempfn{Note\thefootnote}% - \let\ltx@footmark\rev@citemark - \let\ltx@foottext\rev@endtext - \appdef\class@enddocumenthook{\auto@bib}% - \let\printendnotes\relax - }% - }{}% -}% -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\aipreprint}% -% We want to override \filename{aps10pt.rtx}. -% \begin{macrocode} -\def\aipreprint{% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\aippreprint}% -% We want to override \filename{aps12pt.rtx}. -% \begin{macrocode} -\def\aippreprint{% -}% -% \end{macrocode} -% \end{macro} -% -% \begin{macrocode} -%</package> -% \end{macrocode} -% -% \Finale -% %Here ends the programmer's documentation. -% \endinput -% -\endinput |