trunk/Master/texmf-dist/source/latex/photo

git-svn-id: svn://tug.org/texlive/trunk@448 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 953 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/photo/Makefile b/Master/texmf-dist/source/latex/photo/Makefile
new file mode 100644
index 00000000000..e42c9aee38e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/photo/Makefile
@@ -0,0 +1,72 @@
+PKGNAME=photo
+VERSION=`grep '\[[0-9][0-9][0-9][0-9]/[0-9][0-9]/[0-9][0-9]  *v' $(PKGNAME).dtx | sed 's/^[^[]*[^v]*v\\([^ ]*\\).*/\\1/'`
+SRCDIR=$(PKGNAME)
+DISTFILES=\
+	$(SRCDIR)/Makefile \
+	$(SRCDIR)/$(PKGNAME).dtx \
+	$(SRCDIR)/$(PKGNAME).ins \
+	$(SRCDIR)/$(PKGNAME).pdf \
+	$(SRCDIR)/$(PKGNAME)_test.tex
+
+TEXMFLOCAL:=`kpsewhich --expand-path='$$TEXMFLOCAL'`
+STYDIR=$(TEXMFLOCAL)/tex/latex/$(PKGNAME)
+DOCDIR=$(TEXMFLOCAL)/doc/latex/$(PKGNAME)
+
+
+.SUFFIXES:
+.SUFFIXES: .sty .ins .dtx .dvi .ps .pdf
+
+.ins.sty:
+	latex $<
+
+.dtx.dvi:
+	latex $<
+	latex $<
+	makeindex -s gind.ist $(*D)/$(*F).idx
+	makeindex -s gglo.ist -o $(*D)/$(*F).gls $(*D)/$(*F).glo
+	latex $<
+	latex $<
+
+.dvi.ps:
+	dvips -o $(*D)/$(*F).ps $(*D)/$(*F)
+
+.dtx.pdf:
+	pdflatex $<
+	
+
+all: $(PKGNAME).sty $(PKGNAME).dvi $(PKGNAME).ps $(PKGNAME).pdf
+
+tarfile=$(PKGNAME)-$(VERSION).tar.gz
+tar:
+	@echo "**************************"
+	@echo Creating: $(tarfile)
+	@echo "**************************"
+	@-rm -f $(tarfile)
+	tar -cz -C .. --owner 0 --group 0 --mode=a+r -f $(tarfile) $(DISTFILES)
+
+install: all
+	if [ ! -d $(STYDIR) ]; then mkdirhier $(STYDIR); fi
+	if [ ! -d $(DOCDIR) ]; then mkdirhier $(DOCDIR); fi
+	for file in *.sty; do \
+	  install -m644 $$file $(STYDIR); \
+	done
+	for file in *.dvi; do \
+	  install -m644 $$file $(DOCDIR); \
+	done
+	mktexlsr
+
+clean:
+	@-rm -f $(PKGNAME).glo $(PKGNAME).gls $(PKGNAME).idx $(PKGNAME).ilg
+	@-rm -f $(PKGNAME).ind $(PKGNAME).aux $(PKGNAME).toc
+#	@-rm -f $(PKGNAME).drv $(PKGNAME).log
+	@-rm -f *~
+
+distclean: clean
+	@-rm -f $(PKGNAME).drv $(PKGNAME).log
+	@-rm -f $(PKGNAME).sty $(PKGNAME).dvi \
+		$(PKGNAME).ps $(PKGNAME).pdf $(PKGNAME).ps.pdf
+
+
+$(PKGNAME).sty: $(PKGNAME).ins $(PKGNAME).dtx
+$(PKGNAME).dvi: $(PKGNAME).sty
+$(PKGNAME).pdf: $(PKGNAME).ins $(PKGNAME).dtx $(PKGNAME).dvi
diff --git a/Master/texmf-dist/source/latex/photo/photo.drv b/Master/texmf-dist/source/latex/photo/photo.drv
new file mode 100644
index 00000000000..fea5334a02c
--- /dev/null
+++ b/Master/texmf-dist/source/latex/photo/photo.drv
@@ -0,0 +1,49 @@
+%%
+%% This is file `photo.drv',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% photo.dtx  (with options: `driver')
+%% 
+%% File: photo.dtx Copyright 1994 1998 1999 Volker Kuhlmann
+%% All rights are reserved.
+%%
+ \ProvidesFile{photo.drv}
+       [2004/07/15 v2.1f Placing photos in documents (VK)]
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+
+\NeedsTeXFormat{LaTeX2e}[1994/12/01]
+\documentclass{ltxdoc}
+ %\IfFileExists{ltxdoc.cfg}{}{\OnlyDescription\RecordChanges\CodelineIndex}
+
+ %\RecordChanges % for developing
+ %\CodelineIndex\EnableCrossrefs % for developing
+\GetFileInfo{photo.dtx}
+
+\begin{document}
+  \DocInput{photo.dtx}
+  %\IfFileExists{ltxdoc.cfg}{}{\PrintChanges\PrintIndex}
+  %\PrintChanges % for developing
+  %\PrintIndex % for developing
+\end{document}
+
+\endinput
+%%
+%% End of file `photo.drv'.
diff --git a/Master/texmf-dist/source/latex/photo/photo.dtx b/Master/texmf-dist/source/latex/photo/photo.dtx
new file mode 100644
index 00000000000..8831ba97e2b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/photo/photo.dtx
@@ -0,0 +1,805 @@
+% \iffalse meta-comment
+% %%----------------------------------------------------------------------------
+%
+%% File: photo.dtx Copyright 1994 1998 1999 Volker Kuhlmann
+%% All rights are reserved.
+%%
+%
+%<*dtx>
+          \ProvidesFile{photo.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1998/06/01]
+%<package>\ProvidesPackage{photo}
+%<driver> \ProvidesFile{photo.drv}
+%
+% \fi
+%         \ProvidesFile{photo.dtx}
+       [2004/07/15 v2.1f Placing photos in documents (VK)]
+%
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%%
+% \iffalse
+%
+%<*driver>
+%
+
+\NeedsTeXFormat{LaTeX2e}[1994/12/01]
+\documentclass{ltxdoc}
+ %\IfFileExists{ltxdoc.cfg}{}{\OnlyDescription\RecordChanges\CodelineIndex}
+
+ %\RecordChanges % for developing
+ %\CodelineIndex\EnableCrossrefs % for developing
+\GetFileInfo{photo.dtx}
+
+\begin{document}
+  \DocInput{photo.dtx}
+  %\IfFileExists{ltxdoc.cfg}{}{\PrintChanges\PrintIndex}
+  %\PrintChanges % for developing
+  %\PrintIndex % for developing
+\end{document}
+
+%</driver>
+%
+% \fi
+%
+% \GetFileInfo{photo.dtx}
+% \CheckSum{522}
+%
+% \date{\filedate}
+% \title{The \textsf{photo} package\thanks
+%        {This file has version number \fileversion,
+%         last revised \filedate.}}
+% \author{Volker Kuhlmann\thanks{%^^A
+%         ^^AEmail:\ \url{v.kuhlmann@elec.canterbury.ac.nz}}}
+%         Email:\ \url{VolkerKuhlmann@GMX.de}}}
+%
+%
+% \let\package\textsf
+% \let\env\textsf
+% \let\url\texttt
+% \newcommand\optmeta[1]{[\meta{#1}]}
+%
+%
+% \changes{v0.0}{1994/07/03}
+%    {TROG94.sty V3.0, Created out of TROG93.sty, V2.5, 20 Dec 93.}
+%
+% \changes{v1.0}{1998/07/20}
+%    {Created from TROG94.sty, V4.1, 07 Feb 95.}
+%
+% \changes{v1.1}{1998/07/21}
+%    {Changed args \cs{oephoto}. Environment OEphoto.}
+%
+% \changes{v1.1b}{1999/03/25}
+%    {Commented bug.}
+%
+% \changes{v2.0}{1999/06/15}
+%    {Added placements for photo, caption, photographer: \cs{putphoto}.
+%     Added \cs{phref}, \cs{Phref}.
+%     Introduced package options.}
+%
+% \changes{v2.00}{1999/06/16}
+%    {Put under the \LaTeX\ Project Public License (LPPL).}
+%
+% \changes{v2.1}{1999/06/17}
+%    {Added \cs{ifoddpagelabel}.}
+%
+% \changes{v2.1b}{1999/06/25}
+%    {Documentation. Commented out OEphoto-environment.}
+%
+% \changes{v2.1c}{1999/07/01}
+%    {Changed \cs{boxbasec} to avoid brace error in some cases.}
+%
+% \changes{v2.1d}{1999/07/27}
+%    {Put into docstrip format. First public release.}
+%
+% \changes{v2.1e}{2001/09/14}
+%    {Fixed \cs{phref}, \cs{Phref}.}
+%
+% \changes{v2.1f}{2004/07/15}
+%    {Changed email, packaged with PDF.}
+%
+%
+% \maketitle
+%
+% \begin{abstract}
+% This package introduces a new float type called photo which works
+% similar to the float types table and figure. Various options exist for
+% placing photos, captions, and a ``photographer'' line. In twocolumn
+% documents, a possibility exists to generate double-column floats
+% automatically if the photo does not fit into one column. Photos do not
+% have to be placed as floats, they can also be placed as boxes, with
+% captions and photographer line still being available.
+% 
+% ^^A explain photographer line?
+% ^^A explain captions shifted underneath automatically?
+%
+% \end{abstract}
+%
+% \tableofcontents
+%
+%
+% \section{License}
+%
+% This package is copyright (C) 1994, 1998, 1999, 2001, 2004 by:
+%
+% \begin{quote}
+%   Volker Kuhlmann\\
+%   c/o University of Canterbury\\
+%   ELEC Dept, Creyke Road\\
+%   Christchurch, New Zealand\\
+%   E-Mail: \url{VolkerKuhlmann@GMX.de}
+%   ^^AE-Mail: \url{v.kuhlmann@elec.canterbury.ac.nz}
+% \end{quote}
+%
+% This software can be redistributed and/or modified under the terms
+% of the LaTeX Project Public License, distributed from CTAN
+% archives as \url{macros/latex/base/lppl.txt}; either
+% version 1 of the License, or (at your option) any later version.
+%
+%
+% \section{User manual}
+%
+% \subsection{Introduction}
+%
+% The \package{photo} package allows photos to be inserted into
+% documents, taking care of a variety of caption positions and a
+% ``photographer'' line. By default captions are placed next to the
+% photo, but they will be put underneath automatically if there is not
+% enough space left next to the photo. Both caption and photographer
+% line are optional and can be left empty.
+%
+% The photographer line is a short piece of text printed in small print
+% close to the photo, which can e.g.\ be used to give the name of the
+% person who took the photo, or the filename.
+%
+% A command and an environment are provided to place a photo with caption
+% and photographer line, resulting in either a box (the photo will appear
+% at the same place as the placement command in the document), or in a
+% float.
+%
+% A new photo float is defined, which behaves like the existing table and
+% figure floats.
+%
+% The provided file \url{photo\_test.tex} is a test file for the
+% \package{photo} package. It also shows its various capabilities and
+% can serve as an example.
+%
+%
+% \subsection{Package options}
+%
+% The following package options are defined.
+%
+% \begin{description}
+% \item[shortlof]
+%	The list of photos is typeset with a parskip of 0 (plus a little
+%	stretch). This is useful for documents using a non-zero parskip.
+%	It saves having to put |\listofphotos| inside a group with a
+%	zero-parskip setting. This problem is the same for
+%	|\tableofcontents|, |\listoftables|, |\listoffigures| by the way.
+% \end{description}
+%
+% The caption is placed beside the photo by default, the side can be
+% selected by one of:
+% \begin{description}
+% \item[left]
+% 	Place the photo on the left.
+% \item[right]
+% 	Place the photo on the right.
+% \item[in]
+% 	Place the photo on the inside, this is the left on odd pages and
+% 	the right on even pages.
+% \item[out]
+% 	Place the photo on the outside, this is the right on odd pages
+% 	and the left on even pages. (default)
+% \end{description}
+%
+% The vertical placement for captions which are beside the photo can be
+% one of
+% \begin{description}
+% \item[top]
+%	The top of the caption is aligned with the top of the photo.
+% \item[center]
+%	The centre of the caption is aligned with the centre of the
+%	photo. (default)
+% \item[bottom]
+%	The bottom of the caption is aligned with the bottom of the
+%	photo.
+% \end{description}
+%
+% The photographer or attribution line can be placed in either one of
+% these positions:
+% \begin{description}
+% \item[under]
+%	Underneath the photo. (default)
+% \item[side]
+%	Beside the photo.
+% \end{description}
+%
+% If options bottom and side are in effect, the text placed by them
+% might collide because there is not enough space for both. Choose
+% different places for either of these 2 texts. The same can happen with
+% center and top if the height of the caption text comes close to the
+% height of the photo.
+%
+%
+% \subsection{Provide a conditional test for an odd/even page}
+%
+% When captions are placed next to photos, we often need to know whether
+% the photo will end up on an odd or even page. A general-purpose macro
+% is provided which works similar to |\@ifundefined|.
+% \DescribeMacro{\ifoddpage}
+%    \begin{quote}
+%    |\ifoddpage|[\meta{label}]|{|\meta{yes}|}{|\meta{no}|}|
+%    \end{quote}
+% Expands to \meta{yes} if it is on an odd page, otherwise to \meta{no}.
+%
+% \DescribeMacro{\ifoddpagelabel}
+% A label is required for this to work; if none is given one is created.
+% Whatever label is used, it is stored in |\ifoddpagelabel|, which allows
+% this label to be re-used with another |\ifoddpage| if it belongs to the
+% same object. This might reduce the number of labels used. |\ifoddpage|
+% only gives a correct answer if the document is compiled at least twice
+% (because it uses |\label{}|).
+%
+%
+% \subsection{Vertical box alignment}
+%
+% These macros put their argument into an hbox, and vertically shift the
+% baseline of the box to the top edge, center, or bottom edge of the
+% box. By default, the \TeX\ box-commands |\vtop| and  |\vbox| align the
+% baseline of the box on the baseline of the top or bottom line
+% contained in the box, which is also very useful but does not visually
+% line up things for the \package{photo} package.
+% \DescribeMacro{\boxbaset}
+% \DescribeMacro{\boxbasec}
+% \DescribeMacro{\boxbaseb}
+%    \begin{quote}
+%    |\boxbaset{|\meta{LR-material}|}|\\
+%    |\boxbasec{|\meta{LR-material}|}|\\
+%    |\boxbaseb{|\meta{LR-material}|}|
+%    \end{quote}
+% The \package{photo} package needs these in various places, but they are
+% general-purpose and also otherwise useful. Note that the argument may
+% only consist of LR-material.
+%
+%
+% \subsection{Defining a new float type for photos}
+%
+% A new float type is defined for photos, which behaves in a similar way
+% to the figure and table floats.
+% \DescribeEnv{photo}
+% \DescribeEnv{photo*}
+%    \begin{quote}
+%    |\begin{photo}|[\meta{floatpos}]\\
+%    |\begin{photo*}|[\meta{floatpos}]
+%    \end{quote}
+%
+% The star-form gives a double-column float in a twocolumn document,
+% otherwise it is the same as the starless form. The optional
+% \meta{floatpos} argument is the float placement specifier \meta{pos}
+% as described in the \LaTeX-manual. Its default is the same as for
+% figure and table: tbp.
+%
+% \DescribeMacro{\defaultphotoplacement}
+% To change the default float placement specifier for photos, use:
+%    \begin{quote}
+%    |\defaultphotoplacement{|\meta{floatpos}|}|
+%    \end{quote}
+% This affects photo floats only, and will be active for the photo float
+% placed next. It can be changed any time, but to change the placement
+% for a single float the \meta{floatpos} argument would be more convenient.
+%
+% \DescribeMacro{\thephoto}
+% \DescribeMacro{\photoname}
+% \DescribeMacro{\listphotoname}
+% The counter defined for numbering photos is |photo|, its value can be
+% obtained in the currently set numbering format with |\thephoto|. The
+% macros |\photoname| and |\listphotoname| contain the respective texts
+% for adaptations to non-english languages.
+%
+% \DescribeMacro{\listofphotos}
+% A list of photos can be obtained with |\listofphotos|.
+%
+%
+% \subsection{Placing a photo in the document}
+%
+% ^^A\putphoto[PHOTOPOS]{LABEL}{PHOTOGRAPHER}{PHOTO}[TOC-CAPTION]{CAPTION}
+%
+% \DescribeMacro{\putphoto}
+% This command places a photo together with a caption and a photographer
+% name. |\putphoto| produces a paragraph of boxes, not a float! The
+% syntax is
+%    \begin{quote}
+%    |\putphoto|\optmeta{photopos}|{|\meta{label}|}|\\
+%	\hspace*{3em}|{|\meta{photographer}|}{|\meta{photo}|}|^^A
+%	\optmeta{toc-caption}|{|\meta{caption}|}|
+%    \end{quote}
+%
+% \meta{photopos} is an optional placement specification for the photo,
+% the caption, and the photographer line. It overrides, for this photo
+% only, the default arrangement as specified by the package options. Up to
+% one letter of each of the three groups |l, r, i, o| (left, right, in,
+% out), |t, c, b| (top, center, bottom), and |u, s| (under, side) may be
+% given. If \meta{photopos} is given, it may not be empty \emph{is this
+% true?}.
+%
+% \meta{label} is the cross-reference key for this photo. If no
+% \meta{label} is given but |\putphoto| finds it needs one, it will
+% create one itself.
+%
+% \meta{photographer} is the text for the photographer line, which must
+% be LR-material. If it is empty, no such line will be printed.
+%
+% \meta{photo} is the photo itself, which must be LR-material and
+% typically is an |\includegraphics| command.
+%
+% \meta{toc-caption} and \meta{caption} are the caption for this photo,
+% and the text for the list of photos if different from the caption.
+% This works the same as |\caption|. If the \meta{caption} argument is
+% empty, no caption (and no entry in the |\listofphotos|) will be
+% generated.
+%
+% \DescribeMacro{\oecaptionsep}
+% \DescribeMacro{\minoecaptionwidth}
+% The placement of captions beside the photo is controlled by these two
+% dimensions. A horizontal space of |\oecaptionsep| is inserted between
+% the caption and the photo. The width of the caption is the remaining
+% space after the width of the photo and |\oecaptionsep| have been taken
+% off. If less than |\minoecaptionwidth| is left, the caption will be put
+% underneath the photo instead.
+%
+% \DescribeMacro{\photographerfont}
+% The font selection command selecting the font in which
+% \meta{photographer} will be printed. It defaults to a tiny sans-serif.
+%
+% The result of |\putphoto| is a paragraph (or two) containing various
+% boxes. (Would it be better if it resulted in a single box?)
+%
+%
+% \subsection{Placing a photo in the document as float}
+%
+% ^^A\begin{Photo}[PHOTOPOS]{LABEL}{PHOTOGRAPHER}[TOC-CAPTION]{CAPTION}
+% ^^APHOTO (LR material only!)
+% ^^A\end{Photo}
+%
+% \DescribeEnv{Photo}
+% Instead of contributing text material, this environment produces a
+% float (either |photo| or |photo*|). The syntax is very similar to
+% |\putphoto|, except the photo body now comes from the content of the
+% environment.
+%
+% \begin{quote}
+%    |\begin{Photo}|[\meta{photopos}]|{|\meta{label}|}|\\
+%	\hspace*{3em}|{|\meta{photographer}|}|^^A
+%	[\meta{toc-caption}]|{|\meta{caption}|}|\\
+%    \meta{photo}\\
+%    |\end{Photo}|
+% \end{quote}
+%
+% All arguments behave the same as for |\putphoto|. The body of the
+% \env{Photo} environment must be LR-material. |\oecaptionsep| and
+% |\minoecaptionwidth| apply, if those two plus the width of the photo
+% exceed |\columnwidth| in two-column documents, the \env{photo*}
+% environment is called, otherwise \env{photo}. \env{Photo} uses
+% |\putphoto| to do the work.
+% 
+% Note that the \meta{photopos} argument of the \env{Photo} environment
+% has nothing to do with the \meta{floatpos} argument of the \env{photo}
+% and \env{photo*} environments. There is currently no way to specify a
+% \meta{floatpos} with \env{Photo}.
+%
+%
+% \subsection{Cross-referencing}
+%
+% \DescribeMacro{\phref}
+% \DescribeMacro{\Phref}
+% Works as usual. The shortcuts |\phref{|\meta{refkey}|}| and
+% |\Phref{|\meta{refkey}|}| might save a little typing. They work like
+% |\ref|, but also print ``photo'' resp.\ ``Photo''.
+%
+%
+% \subsection{Problems / Limitations}
+%
+% \begin{itemize}
+% \item
+%	Mixing the |\putphoto| command with the |\begin{Photo}|
+%	environment can  severely mix up the order of the photos in the
+%	document. Even the |\listofphotos| may not be in order!! \LaTeX\
+%	isn't designed to handle this case, there is probably nothing
+%	that can be done about this. Don't mix the two in the same
+%	document (though ensuring all photo floats are written out
+%	before using |\putphoto| seems to be safe).
+% \item
+%	|\Phref| does not use |\photoname| (how do I uppercase a first
+%	letter only?).
+% \item
+%	There is currently no way to specify a \meta{floatpos} with
+%	\env{Photo}.
+% \item
+%	It should be possible to revert back to the \LaTeX-default of
+%	placing captions underneath.
+% \end{itemize}
+%
+%
+% \subsection{To do}
+%
+% \begin{itemize}
+% \item
+%	Check what happens if \meta{photopos} is given but empty.
+% \item
+%	Give option of setting the caption above the photo.
+% \end{itemize}
+%
+%
+% \DoNotIndex{\@@t,\@CAP,\@CAPf,\@CPOS,\@CPOSdflt,\@LAB,\@OEPOS}
+% \DoNotIndex{\@OEPOSdflt,\@PGR,\@POS@DFLT,\@PPOS,\@PPOSdflt,\@TCAP}
+% \DoNotIndex{\@TCAPf,\@arabic,\@captype,\@dblarg,\@dblfloat}
+% \DoNotIndex{\@dottedtocline,\@float,\@ifundefined,\@mkboth}
+% \DoNotIndex{\@secondoftwo,\@starttoc,\@tempa,\@tempb,\@tfor}
+% \DoNotIndex{\abovecaptionskip,\advance,\begin,\begingroup}
+% \DoNotIndex{\belowcaptionskip,\box,\c@photo,\cap@width,\caption}
+% \DoNotIndex{\centering,\chapter,\columnwidth,\csname}
+% \DoNotIndex{\DeclareOption,\def,\depth,\dimen,\do,\edef,\else}
+% \DoNotIndex{\empty,\end,\end@dblfloat,\end@float,\endcsname}
+% \DoNotIndex{\endgroup,\ExecuteOptions,\expandafter,\ext@photo,\fi}
+% \DoNotIndex{\fnum@photo,\fps@photo,\ftype@photo,\global,\hbox}
+% \DoNotIndex{\height,\hskip,\if,\if@twocolumn,\ifdim,\ifodd,\ifx}
+% \DoNotIndex{\l@photo,\label,\leavevmode,\llap,\lop@parskip}
+% \DoNotIndex{\MakeUppercase,\newbox,\newcommand,\newcount}
+% \DoNotIndex{\newcounter,\newdimen,\newenvironment,\newline,\oe@box}
+% \DoNotIndex{\oe@labcnt,\oe@temp,\PackageError,\pageref,\par}
+% \DoNotIndex{\parbox,\parskip,\photo@caption,\Photo@ii,\photo@lift}
+% \DoNotIndex{\photo@scap,\photo@ucap,\ProcessOptions,\protect}
+% \DoNotIndex{\putphoto@ii,\raggedleft,\raisebox,\ref,\renewcommand}
+% \DoNotIndex{\rlap,\romannumeral,\section,\setbox,\sffamily}
+% \DoNotIndex{\textwidth,\thephoto,\tiny,\totalheight,\typeout,\wd,\z@}
+%
+% \StopEventually{}
+%
+%
+%
+% \section{Implementation}
+%    \begin{macrocode}
+%<*package>
+%    \end{macrocode}
+%
+%
+% \subsection{Package options}
+%
+% Reduce parskip for list of photos
+%    \begin{macrocode}
+\DeclareOption{shortlop}{\newcommand\lop@parskip{\parskip 0ex plus0.03ex}}
+%    \end{macrocode}
+% Photo placement
+%    \begin{macrocode}
+\DeclareOption{left}{\def\@OEPOSdflt{l}}
+\DeclareOption{right}{\def\@OEPOSdflt{r}}
+\DeclareOption{in}{\def\@OEPOSdflt{i}}
+\DeclareOption{out}{\def\@OEPOSdflt{o}}
+%    \end{macrocode}
+% Vertical caption placement
+%    \begin{macrocode}
+\DeclareOption{top}{\def\@CPOSdflt{t}}
+\DeclareOption{center}{\def\@CPOSdflt{c}}
+\DeclareOption{bottom}{\def\@CPOSdflt{b}}
+%    \end{macrocode}
+% Photographer line placement
+%    \begin{macrocode}
+\DeclareOption{under}{\def\@PPOSdflt{u}}
+\DeclareOption{side}{\def\@PPOSdflt{s}}
+%    \end{macrocode}
+%
+%
+% \subsection{Option default and processing}
+%
+%    \begin{macrocode}
+%\edef\@POS@DFLT{\@OEPOSdflt\@CPOSdflt\@PPOSdflt}
+\ExecuteOptions{out,center,under}
+\ProcessOptions
+%    \end{macrocode}
+%
+%
+% \subsection{A conditional test for an odd/even page}
+%
+% \begin{macro}{\ifoddpage}
+% Like |\@ifundefined|, but test whether page is odd.
+% If no label is supplied, one is made up. Whichever label is used is returned
+% in |\ifoddpagelabel|, so a made-up label can be reused.
+% Thanks to David Carlisle \url{carlisle@cs.man.ac.uk} for getting me on
+% track for deciding whether we are on an odd or even page.
+%    \begin{macrocode}
+\newcount\oe@labcnt
+\newcommand\ifoddpage[3][]{%
+	% make a label if none given
+	\edef\ifoddpagelabel{#1}%
+	\ifx\ifoddpagelabel\empty
+		\global\advance\oe@labcnt 1%
+		\edef\ifoddpagelabel{oelbl@\romannumeral\oe@labcnt}%
+		%\typeout{empty label: using \ifoddpagelabel}%
+		\label\ifoddpagelabel
+	\fi
+	% execute either YES or NO
+	%\typeout{\ifoddpagelabel, 0\pageref{\ifoddpagelabel},
+	%	 r@\ifoddpagelabel, \csname r@\ifoddpagelabel\endcsname,
+	%	 \page@ref@@\ifoddpagelabel}%
+	%\ifodd0\pageref{\ifoddpagelabel}\def\oe@temp{#2}\else\def\oe@temp{#3}\fi
+	\ifodd0\page@ref@@\def\oe@temp{#2}\else\def\oe@temp{#3}\fi
+	\oe@temp
+}
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{\page@ref@@}
+% The \package{babel} package |\protect|'s |\pageref|, which then becomes
+% useless for |\ifodd|. We emulate the original unprotected definition
+% of the \LaTeX\ kernel (is there a better solution?).
+%    \begin{macrocode}
+\newcommand\page@ref@@{\expandafter\expandafter\expandafter
+			\@secondoftwo\csname r@\ifoddpagelabel\endcsname}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Vertical box alignment}
+%
+% Shift the baseline of the argument to the top edge, center, bottom edge
+% respectively.
+%    \begin{macrocode}
+\newcommand\boxbaset{\raisebox{-\height}}
+\newcommand\boxbaseb{\raisebox{\depth}}
+\newcommand\boxbasec[1]{\raisebox{-0.5\totalheight}{\boxbaseb{#1}}}
+%    \end{macrocode}
+%
+%
+% \subsection{A new float type for photos}
+%
+% A new float type. As for figures and tables.
+%
+% counter, names, file extension, default placement
+%    \begin{macrocode}
+\newcounter{photo}
+\renewcommand\thephoto{\@arabic\c@photo}
+\newcommand\photoname{Photo}
+\newcommand\listphotoname{List of Photos}
+\def\fps@photo{tbp}
+\def\ftype@photo{4}
+\def\ext@photo{lop}
+\def\fnum@photo{\photoname~\thephoto}
+%    \end{macrocode}
+% The default photo placement can be changed with this command:
+%    \begin{macrocode}
+\newcommand\defaultphotoplacement[1]{\def\fps@photo{#1}}
+%    \end{macrocode}
+% single-column float
+%    \begin{macrocode}
+\newenvironment{photo}%
+               {\@float{photo}}%
+               {\end@float}
+%    \end{macrocode}
+% double-column float
+%    \begin{macrocode}
+\newenvironment{photo*}%
+               {\@dblfloat{photo}}%
+               {\end@dblfloat}
+%    \end{macrocode}
+% Generate a list of photos.
+% For the list of photos we need to take care of the document class.
+% Do a crude job and use |\chapter| if it is defined, |\section| otherwise.
+%    \begin{macrocode}
+\newcommand\listofphotos{%
+\begingroup
+\csname lop@parskip\endcsname
+\@ifundefined{chapter}{\section}{\chapter}*{\listphotoname
+      \@mkboth{\MakeUppercase\listphotoname}%
+              {\MakeUppercase\listphotoname}}%
+    \@starttoc{\ext@photo}%
+\endgroup
+    }
+%    \end{macrocode}
+% A table-of-contents entry.
+%    \begin{macrocode}
+\newcommand*\l@photo{\@dottedtocline{1}{1.5em}{2.3em}}
+%    \end{macrocode}
+%
+%
+% \subsection{Command for placing a photo}
+%
+% declare some variables
+%    \begin{macrocode}
+\newdimen\oecaptionsep
+\newdimen\minoecaptionwidth
+\newbox\oe@box
+\oecaptionsep		10mm
+\minoecaptionwidth	35mm
+\newcommand\photographerfont{\tiny\sffamily}
+%    \end{macrocode}
+%
+% \begin{macro}{\putphoto}
+% This command places a photo into the document. It does not produce a
+% float!
+%    \begin{macrocode}
+\newcommand\putphoto[4][\@OEPOSdflt\@CPOSdflt\@PPOSdflt]{%
+	\par
+	\begingroup
+	\edef\@OEPOS{#1}\edef\@LAB{#2}\def\@PGR{#3}%
+	\setbox\oe@box\hbox{#4}%
+	\putphoto@ii
+}
+%    \end{macrocode}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\putphoto@ii[2][]{%
+	\def\@TCAP{#1}\def\@CAP{#2}%
+	%
+	\def\@captype{photo}% make (photo-)\caption available outside float
+	%
+	\def\cap@width{\dimen0}% shortcut - w/o introducing a new variable
+	%
+	% process placement info
+	\def\@CPOS{\@CPOSdflt}\def\@PPOS{\@PPOSdflt}%
+	%\typeout{photo pos: ... \@OEPOS, \@PPOS, \@CPOS}%
+	\def\@tempb{\@tfor\@tempa:=}%
+	\expandafter\@tempb\@OEPOS\do{%
+	  %\typeout{loop: \@tempa}
+	  \if l\@tempa \def\@OEPOS{l}\else
+	  \if r\@tempa \def\@OEPOS{r}\else
+	  \if i\@tempa \ifx\@PGR\empty\else
+		\ifoddpage[\@LAB]{\def\@OEPOS{l}}{\def\@OEPOS{r}}\fi\else
+	  \if o\@tempa \ifx\@PGR\empty\else
+		\ifoddpage[\@LAB]{\def\@OEPOS{r}}{\def\@OEPOS{l}}\fi\else
+	  \if u\@tempa \def\@PPOS{u}\else
+	  \if s\@tempa \def\@PPOS{s}\else
+	  \if t\@tempa \def\@CPOS{t}\else
+	  \if c\@tempa \def\@CPOS{c}\else
+	  \if b\@tempa \def\@CPOS{b}\else
+	  \PackageError{photo}{illegal pos: \@tempa}{}%
+	  \fi\fi\fi\fi\fi\fi\fi\fi\fi}%
+	%\typeout{photo pos: ==> \@OEPOS, \@PPOS, \@CPOS}%
+	%
+	% calculate width available for caption:
+	\cap@width\columnwidth
+	\advance\cap@width-\wd\oe@box \advance\cap@width-\oecaptionsep
+	%
+	% place caption beside photo if there is enough space left, underneath
+	% otherwise:
+	\ifdim\minoecaptionwidth>\cap@width\photo@ucap\else\photo@scap\fi
+	\endgroup
+}
+%    \end{macrocode}
+% photo with caption underneath
+%    \begin{macrocode}
+\newcommand\photo@ucap{%
+	\begingroup
+	\centering\parbox{\wd\oe@box}{%
+		\leavevmode\box\oe@box
+		\ifx\@PGR\empty\else
+		  \newline\photographerfont
+		  \if r\@OEPOS \raggedleft \fi
+		  \@PGR
+		\fi
+	}\par
+	\endgroup
+	\photo@caption
+}
+%    \end{macrocode}
+% photo with caption beside
+%    \begin{macrocode}
+\newcommand\photo@scap{%
+	\abovecaptionskip\z@
+	\belowcaptionskip\z@
+	\leavevmode
+	\ifx\@PGR\empty\else\if s\@PPOS \if r\@OEPOS
+	  \rlap{\boxbaseb{\parbox{\cap@width}{%
+	    \photographerfont\raggedleft\@PGR}}}\fi\fi\fi
+	\boxbaseb{%
+	  \if l\@OEPOS
+	    \photo@lift{\wd\oe@box}{\box\oe@box}\hskip\oecaptionsep
+	      \photo@lift\cap@width\photo@caption
+	  \else
+	    \photo@lift\cap@width\photo@caption\hskip\oecaptionsep
+	      \photo@lift{\wd\oe@box}{\box\oe@box}%
+	  \fi
+	}%
+	\ifx\@PGR\empty\else
+	  \if u\@PPOS
+	    \newline\photographerfont\if r\@OEPOS \raggedleft \fi\@PGR
+	  \else\if l\@OEPOS
+	      \llap{\boxbaseb{\parbox{\cap@width}{\photographerfont\@PGR}}}\fi
+	  \fi
+	\fi
+	\par
+}
+%    \end{macrocode}
+% This creates a parbox, with its baseline shifted to the top edge /
+% centre / bottom edge.
+%    \begin{macrocode}
+\newcommand\photo@lift[2]{%
+	%\if t\@CPOS \raisebox{-\height}{\parbox{#1}{#2}}\else
+	%\if b\@CPOS \raisebox{\depth}{\parbox{#1}{#2}}\else
+	%\raisebox{-0.5\totalheight}{\raisebox{\depth}{\parbox{#1}{#2}}}\fi\fi
+	\csname boxbase\@CPOS\endcsname{\parbox{#1}{#2}}%
+}
+%    \end{macrocode}
+% Set the caption, within the provided width.
+%    \begin{macrocode}
+\newcommand\photo@caption{%
+	\ifx\@CAP\empty\else
+		\ifx\@TCAP\empty
+			\caption{\@CAP}\else
+			\caption[\@TCAP]{\@CAP}\fi
+		\ifx\@LAB\empty\else\label\@LAB\fi
+	\fi
+}
+%    \end{macrocode}
+%
+%
+% \subsection{Environment for placing a floating photo}
+%
+% ^^A\begin{macro}{Photo}  ^^A This does not work for environments!
+% This environment produces a photo float, single-column if possible or
+% double-column otherwise. It uses |\putphoto|.
+%    \begin{macrocode}
+\newenvironment{Photo}[3][\@OEPOSdflt\@CPOSdflt\@PPOSdflt]{%
+	\par
+	\begingroup
+	\edef\@OEPOS{#1}\edef\@LAB{#2}\def\@PGR{#3}%
+	%\Photo@ii
+	\@dblarg\Photo@ii
+}{%
+	\end{lrbox}%
+	\def\@@t{photo}%
+	\if@twocolumn\ifdim\wd\oe@box>\columnwidth
+		% for this photo, the column width is effectively \textwidth
+		\def\@@t{photo*}\columnwidth\textwidth
+	\fi\fi
+	\expandafter\begin\expandafter{\@@t}%
+	\begingroup
+	\putphoto@ii[\@TCAPf]\@CAPf
+	\expandafter\end\expandafter{\@@t}%
+	\endgroup
+}
+%    \end{macrocode}
+% ^^A\end{macro}
+% continue with part 2
+%    \begin{macrocode}
+\newcommand\Photo@ii[2][]{%
+	\def\@TCAPf{#1}\def\@CAPf{#2}%
+	\begin{lrbox}\oe@box
+}
+%    \end{macrocode}
+%
+%
+% \subsection{Cross-referencing}
+%
+% The ``photo'' name shouldn't be hard-coded.
+%    \begin{macrocode}
+\newcommand\phref[1]{photo~\ref{#1}}
+\newcommand\Phref[1]{\photoname~\ref{#1}}
+%    \end{macrocode}
+%
+%
+%
+%    \begin{macrocode}
+%</package>
+%    \end{macrocode}
+%
+% \Finale
+%
+% \iffalse
+% %% EOF photo.dtx
+% %%----------------------------------------------------------------------------
+% \fi
diff --git a/Master/texmf-dist/source/latex/photo/photo.ins b/Master/texmf-dist/source/latex/photo/photo.ins
new file mode 100644
index 00000000000..420e51072b3
--- /dev/null
+++ b/Master/texmf-dist/source/latex/photo/photo.ins
@@ -0,0 +1,27 @@
+\def\batchfile{photo.ins}
+
+\input docstrip
+
+\preamble
+\endpreamble
+
+\keepsilent
+\askforoverwritefalse % for developing
+
+\generate{\file{photo.sty}{\from{photo.dtx}{package}}
+	  \file{photo.drv}{\from{photo.dtx}{driver}}
+         }
+
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the file}
+\Msg{* `photo.sty' into a directory searched by TeX.}
+\Msg{*}
+\Msg{* To produce the documentation run LaTeX on the}
+\Msg{* file `photo.dtx'}
+\Msg{*}
+\Msg{***********************************************************}
+
+\endinput
+
+