mylatexformat

git-svn-id: svn://tug.org/texlive/trunk@21058 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 324 insertions, 145 deletions

diff --git a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.drv b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.drv
index 14bd60fd51e..bcac910644c 100644
--- a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.drv
+++ b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.drv
@@ -8,7 +8,7 @@
 %% 
 %% This is a generated file.
 %% 
-%% mylatexformat : 2010/06/30 v2.1 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+%% mylatexformat : 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
 %% 
 %% This work may be distributed and/or modified under the
 %% conditions of the LaTeX Project Public License, either
@@ -21,23 +21,31 @@
 %%    mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
 %% 
 %% mylatexformat - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
-%% Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
+%% Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
 %% 
 \edef\thisfile{\jobname}
-\def\thisinfo{Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file}
-\def\thisdate{2010/08/09}
-\def\thisversion{2.9}
+\def\thisinfo{Make a format based on the preamble of any \texorpdfstring{\LaTeX{}}{LaTeX} file}
+\def\thisdate{2011/01/12}
+\def\thisversion{3.0}
 \let\loadclass\LoadClass
 \def\LoadClass#1{\loadclass[abstracton]{scrartcl}\let\scrmaketitle\maketitle\AtEndOfClass{\let\maketitle\scrmaketitle}}
+\PassOptionsToPackage{svgnames}{xcolor}
+\PassOptionsToPackage{hyperfootnotes}{hyperref}
 \documentclass[a4paper,oneside]{ltxdoc}
+\AtBeginDocument{\DeleteShortVerb{\|}}
 \usepackage[latin1]{inputenc}
 \usepackage[american]{babel}
 \usepackage[T1]{fontenc}
-\usepackage{etex,etoolbox,holtxdoc,geometry,lastpage,tocloft,graphicx,xspace,fancyhdr,color,bbding,embedfile,framed,keycommand,multirow,txfonts,makecell,enumitem,arydshln,atveryend}
+\usepackage{etex,etoolbox,geometry,lastpage,xspace,xcolor,bbding,txfonts,atveryend,moresize,relsize}
+\usepackage{tocloft,titlesec,graphicx,fancyhdr,framed,multirow,makecell,tabu,enumitem,needspace}
+\usepackage{holtxdoc,bookmark,embedfile,tabu,keycommand}
+\usepackage{interfaces}
+\usetikz{basic}
+\csname endofdump\endcsname
 \CodelineNumbered
-\usepackage{fancyvrb}
+\usepackage{fancyvrb}\fvset{gobble=1,listparameters={\topsep=0pt}}
 \lastlinefit999
-\geometry{top=2cm,headheight=1cm,headsep=.3cm,bottom=1.4cm,footskip=.5cm,left=2.5cm,right=1cm}
+\geometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=4cm,right=1.5cm}
 \hypersetup{%
   pdftitle={The mylatexformat package},
   pdfsubject={Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file},
diff --git a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.dtx b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.dtx
index aa2111d506a..8ea5e8082d6 100644
--- a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.dtx
+++ b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.dtx
@@ -1,5 +1,5 @@
 % \iffalse meta-comment
-% mylatexformat : 2010/08/09 v2.9 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file]
+% mylatexformat : 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file]
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
@@ -22,7 +22,7 @@
 %
 % Documentation:
 %           (pdf)latex mylatexformat.dtx
-% Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
+% Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
 %<*ignore>
 \begingroup
   \def\x{LaTeX2e}%
@@ -36,7 +36,7 @@
 \input docstrip.tex
 \Msg{************************************************************************}
 \Msg{* Installation}
-\Msg{* Package 2010/08/09 v2.9 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file*}
+\Msg{* Package 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file*}
 \Msg{************************************************************************}
 
 \keepsilent
@@ -47,7 +47,7 @@
 
 This is a generated file.
 
-mylatexformat : 2010/08/08 v2.9 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+mylatexformat : 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -60,7 +60,7 @@ and the derived files
    mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
 
 mylatexformat - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
-Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
+Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
 
 \endpreamble
 \let\MetaPrefix\DoubleperCent
@@ -70,7 +70,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
    \file{mylatexformat.ltx}{\from{mylatexformat.dtx}{package}}%
 }
 
-\askforoverwritetrue
+\askforoverwritefalse
 \generate{%
    \file{mylatexformat.drv}{\from{mylatexformat.dtx}{driver}}%
 }
@@ -97,20 +97,28 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %</ignore>
 %<*driver>
 \edef\thisfile{\jobname}
-\def\thisinfo{Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file}
-\def\thisdate{2010/08/09}
-\def\thisversion{2.9}
+\def\thisinfo{Make a format based on the preamble of any \texorpdfstring{\LaTeX{}}{LaTeX} file}
+\def\thisdate{2011/01/12}
+\def\thisversion{3.0}
 \let\loadclass\LoadClass
 \def\LoadClass#1{\loadclass[abstracton]{scrartcl}\let\scrmaketitle\maketitle\AtEndOfClass{\let\maketitle\scrmaketitle}}
+\PassOptionsToPackage{svgnames}{xcolor}
+\PassOptionsToPackage{hyperfootnotes}{hyperref}
 \documentclass[a4paper,oneside]{ltxdoc}
+\AtBeginDocument{\DeleteShortVerb{\|}}
 \usepackage[latin1]{inputenc}
 \usepackage[american]{babel}
 \usepackage[T1]{fontenc}
-\usepackage{etex,etoolbox,holtxdoc,geometry,lastpage,tocloft,graphicx,xspace,fancyhdr,color,bbding,embedfile,framed,keycommand,multirow,txfonts,makecell,enumitem,arydshln,atveryend}
+\usepackage{etex,etoolbox,geometry,lastpage,xspace,xcolor,bbding,txfonts,atveryend,moresize,relsize}
+\usepackage{tocloft,titlesec,graphicx,fancyhdr,framed,multirow,makecell,tabu,enumitem,needspace}
+\usepackage{holtxdoc,bookmark,embedfile,tabu,keycommand}
+\usepackage{interfaces}
+\usetikz{basic}
+\csname endofdump\endcsname
 \CodelineNumbered
-\usepackage{fancyvrb}
+\usepackage{fancyvrb}\fvset{gobble=1,listparameters={\topsep=0pt}}
 \lastlinefit999
-\geometry{top=2cm,headheight=1cm,headsep=.3cm,bottom=1.4cm,footskip=.5cm,left=2.5cm,right=1cm}
+\geometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=4cm,right=1.5cm}
 \hypersetup{%
   pdftitle={The mylatexformat package},
   pdfsubject={Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file},
@@ -126,7 +134,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %</driver>
 % \fi
 %
-% \CheckSum{254}
+% \CheckSum{-0}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -168,18 +176,25 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 % \DoNotIndex{\maketitle,\parindent,\setbox,\x,\kernel@ifnextchar}
 % \DoNotIndex{\KVS@CommaComma,\KVS@CommaSpace,\KVS@EqualsSpace,\KVS@Equals,\KVS@Global,\KVS@SpaceEquals,\KVS@SpaceComma,\KVS@Comma}
 % \DoNotIndex{\DefineShortVerb,\DeleteShortVerb,\UndefineShortVerb,\MakeShortVerb,\endinput}
-% ^^A\AfterLastShipout{\label{LastPage}}%
+%
 % \let\ClearPage\clearpage
 % \makeatletter
-% \MakeShortVerb{\+}\DeleteShortVerb{\|}\DefineShortVerb{\|}
 % \catcode`\§ \active   \def§{\@ifnextchar §{\par\nobreak\vskip-2\parskip}{\par\nobreak\vskip-\parskip}}
-% \def\thispackage{\xpackage{\thisfile}\xspace}
+% \newrobustcmd\Xspace{\ifnum\catcode`\ =\active\else\expandafter\xspace\fi}
+% \newrobustcmd*\stform{\ifincsname\else\expandafter\@stform\fi}
+% \newrobustcmd*\@stform{\@ifnextchar*{\@@stform[]\textasteriskcentered\@gobble}\@@stform}
+% \newrobustcmd*\@@stform[2][\string]{\textttbf{#1#2}\Xspace}
+%
+% \newrobustcmd*\thispackage{\@ifstar
+%  {\xpackage{{\thisfile}}\Xspace}
+%  {\xpackage{{\pkgcolor\thisfile}}\Xspace}}
 % \def\ThisPackage{\Xpackage{\thisfile}\xspace}
 % \def\Xpackage{\@dblarg\X@package}
 % \def\X@package[#1]#2{\@testopt{\X@@package{#1}{#2}}{}}
 % \def\X@@package#1#2[#3]{%
 %     \xpackage{#2\footnote{\noindent\xpackage{#2}: \href{http://www.ctan.org/tex-archive/macros/latex/contrib/#1}{\nolinkurl{CTAN:macros/latex/contrib/#1}}#3}}}
 % \def\Underbrace#1_#2{$\underbrace{\vtop to2ex{}\hbox{#1}}_{\footnotesize\hbox{#2}}$}
+% \newrobustcmd*\FC[1][\color{copper}]{{#1\usefont{T1}{fts}xn FC}}
 %
 % \parindent\z@\parskip.4\baselineskip\topsep\parskip\partopsep\z@
 % \g@addto@macro\macro@font{\macrocodecolor\let\AltMacroFont\macro@font}
@@ -195,15 +210,57 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 % \renewrobustcmd*\bf{\bfseries}\newcommand\nnn{\normalfont\mdseries\upshape}\newcommand\nbf{\normalfont\bfseries\upshape}
 % \newrobustcmd*\blue{\color{blue}}\newcommand*\red{\color{dr}}\newcommand*\green{\color{green}}\newcommand\rred{\color{red}}
 % \newrobustcmd\rrbf{\color{red}\bfseries}
+% \newcommand\textt[1]{\texorpdfstring{\texttt{#1}}{#1}}
+% \newrobustcmd\texttbf[1]{\textbf{\texttt{#1}}}
+% \colorlet{pkgcolor}{teal}\def\pkgcolor{\color{pkgcolor}}
 % \definecolor{copper}{rgb}{0.67,0.33,0.00}  \newcommand\copper{\color{copper}}
 % \definecolor{dg}{rgb}{0.16,0.33,0.00}      \newcommand\dg{\color{dg}}
 % \definecolor{db}{rgb}{0,0,0.502}           \newcommand\db{\color{db}}
 % \definecolor{dr}{rgb}{0.49,0.00,0.00}      \let\dr\red
+% \definecolor{lk}{rgb}{0.25,0.25,0.25}      \newrobustcmd\lk{\color{lk}}
 % \newrobustcmd\bk{\color{black}}\newcommand\md{\mdseries}
+% \def\M{\@ifstar{\M@i\@firstofone}{\M@i\meta}}
+% \def\M@i#1{\@ifnextchar[^^A]
+%   {\M@square#1}
+%   {\@ifnextchar(^^A)
+%     {\M@paren#1}
+%     {\M@brace#1}}^^A
+% }
+% \def\M@square#1[#2]{\M@Bracket[{#1{#2}}]}
+% \def\M@paren#1(#2){\M@Bracket({#1{#2}})}
+% \def\M@brace#1#2{\M@Bracket\{{#1{#2}}\}}
+% \def\M@Bracket#1#2#3{{\ttfamily#1#2#3}}
+% \newrobustcmd*\thisyear{\begingroup
+%    \def\thisyear##1/##2\@nil{\endgroup
+%       \oldstylenums{\ifnum##1=2010\else 2010\,\textendash\,\fi ##1}^^A
+%    }\expandafter\thisyear\thisdate\@nil
+% }
+%
+% \renewrobustcmd\declcs[2][]{^^A
+%   \if@nobreak \par\nobreak
+%   \else \par\addvspace\parskip
+%         \needspace{\bottomtitlespace}\fi
+%   \noindent\changefont{size+=2.5pt,spread=1,fam=\ttdefault}^^A
+%   \hspace{-\leftmargini}^^A
+%   \def\*{\unskip\,\texttt{*}}^^A
+%   \begin{tabu}{|l|}^^A
+%     \hline
+%     \expandafter\SpecialUsageIndex\csname #2\endcsname
+%     \raisedhyperdef[14pt]{declcs}{#2}{\cs[{#1}]{#2}}^^A
+% }^^A
+% \renewcommand\enddeclcs{%
+%     \crcr \hline
+%     \end{tabu}%
+%     \nobreak   \par  \nobreak
+%     \noindent
+%     \ignorespacesafterend
+%  }
+% \newrobustcmd*\csref[2][]{\hyperref{}{declcs}{#2}{\cs[{#1}]{#2}}}
+%
+%
 % \DefineVerbatimEnvironment{Verb}{Verbatim}{gobble=1}
 % \DefineVerbatimEnvironment{VerbLines}{Verbatim}{gobble=1,frame=lines,framesep=6pt,fontfamily=txtt,fontseries=b}
-% \DeleteShortVerb{\+}
-%\newkeyenvironment+[\|]{dblruled}[first=.4pt,second=.4pt,sep=1pt,left=\z@]%
+% \newkeyenvironment+[\|]{dblruled}[first=.4pt,second=.4pt,sep=1pt,left=\z@]%
 %   {|\def\FrameCommand|{%
 %     \vrule\@width\commandkey{first}
 %     \hskip\commandkey{sep}
@@ -213,97 +270,182 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %  }{%
 %   |\endMakeFramed|%
 %  }
-% \fancyhf{}\fancyhead[L]{The \thispackage package -- \thisinfo}
-% \fancyfoot[L]{\color[gray]{.35}\scriptsize\thispackage\quad[rev.\thisversion]\quad\copyright\oldstylenums{2010}\,\lower.3ex\hbox{\NibRight}\,Florent Chervet}
-% \fancyfoot[R]{\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}}}
-% \pagestyle{fancy}
-% \fancypagestyle{plain}{%
-%     \let\headrulewidth\z@
-%     \fancyhf{}%
-%     \fancyfoot[R]{\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}}}}
-%
-% \newcommand\macrocodecolor{\color{macrocode}}\definecolor{macrocode}{rgb}{0.18,0.00,0.45}
+%
+% \colorlet{HeadBand}{BlanchedAlmond}
+% \newcommand*\topheader{\tikz[remember picture,overlay]{
+%   \coordinate (A) at (current page.north west);
+%   \coordinate (B) at ($(current page.north east)+(0cm,-\headheight)$);
+%   \fill [color=HeadBand,fill opacity=.6] (A) rectangle (B);
+%   }%
+% }
+%
+% \pagesetup[plain]{
+%     norules,
+%     foot/right=\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}},
+%     foot/font=\lk\scriptsize,
+%     foot/left/offset=3cm,
+%     foot/right/offset=1cm,
+%     foot/left=\vbox to\baselineskip{\vss{{\rotatebox[origin=l]{90}{\thispackage\,[rev.\thisversion]\,\copyright\,\thisyear\,\lower.4ex\hbox{\pkgcolor\NibRight}\,\FC\quad \xemail{florent.chervet at free.fr}}}}},
+% }
+% \pagesetup{
+%     foot/right={\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}}},
+%     foot/font=\lk\scriptsize,
+%     foot/left/offset=3cm,
+%     foot/right/offset=1cm,
+%     foot/left=\vbox to\baselineskip{\vss{{\rotatebox[origin=l]{90}{\thispackage\,[rev.\thisversion]\,\copyright\,\thisyear\,\lower.4ex\hbox{\pkgcolor\NibRight}\,\FC}}}},
+%     head/font=\small\sffamily,
+%     head/right/offset=1cm,
+%     head/right=\noindent\raise.4ex\hbox{\thispackage : \thisinfo},
+%     head/left=\topheader,
+% }
+% \sectionformat\section{
+%     top=\medskipamount,
+%     bottom=.5\smallskipamount,
+%     bookmark={color=MidnightBlue},
+% }
+% \sectionformat\subsubsection{
+%     top=\smallskipamount,bottom=0pt,
+%     bookmark={color=lk},
+% }
+% \bookmarksetup{openlevel=3}
+%
+% \newcommand\macrocodecolor{\color{macrocode}}\definecolor{macrocode}{rgb}{0.05,0.02,0.07}
 % \newcommand\reflinkcolor{\color{reflink}}\definecolor{reflink}{rgb}{0.49,0.00,0.00}
-% \newrobustcmd\stform{\@ifnextchar*{\@stform[]\textasteriskcentered\@gobble}\@stform}
-% \newrobustcmd\@stform[2][\string]{\textttbf{\rred#1#2}\xspace}
 % \newrobustcmd*\IMPLEMENTATION{%
-%     \hypersetup{bookmarksopenlevel=1}
-%     \section{Implementation} \label{sec:implementation}}
+%     \bookmarksetup{openlevel=1}
+%     ^^A\geometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=4cm,right=1.5cm}
+%     \newgeometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=3cm,right=2mm}
+%     \pagesetup*{left/offset-=1cm,right/offset-=1.5cm-2mm}
+%     \section{Implementation} \label{sec:implementation}
+% }
 % \renewrobustcmd*\PrintMacroName[1]{%
 %     \setbox0\hbox{\MacroFont \strut \string #1\ }%
 %     \global\labelsep\dimexpr\wd0-3em\relax\global\itemindent\labelsep
 %     \hbox to4em{\box0\hss}}
-% \def\B{\MakeBraces[]}
-% \def\P{\MakeBraces()}
-% \def\M{\MakeBraces\{\}}
-% \def\MakeBraces#1#2{\@ifstar{\MakeBr@ces{#1}{#2}\@firstofone}{\MakeBr@ces{#1}{#2}\meta}}
-% \def\MakeBr@ces#1#2#3#4{\texttt{#1}#3{#4}\texttt{#2}}
 %
 % \makeatother
 %
 % \deffootnote{1em}{0pt}{\rlap{\textsuperscript{\thefootnotemark}}\kern1em}
 %
-% \title{\vskip-18pt\mdseries The {\bfseries\ThisPackage}\kern.6em package}
-% \author{\footnotesize\xemail{florent.chervet@free.fr}}
-% \date{\thisdate~--~version \thisversion}
-% \subtitle{Use {\db mylatexformat.ltx} to make a format based on the preamble of any LaTeX file}
-% ^^A\subject{\thisinfo}
+% \title{\vspace*{-28pt}\href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/mylatexformat.html}{\HUGE\bfseries\sffamily\pkgcolor mylatexformat}\vspace*{6pt}}
+% \date{}
+% \subtitle{\LARGE\begin{tabu}{X[c]}
+%           Use \thispackage* to make a format \\
+%           based on the preamble of any LaTeX file \\[-1ex]
+%           \small\FC
+%           \end{tabu}
+%           \vspace*{-12pt}}
+% \author{\smaller\thisdate~--~\hyperref[\thisversion]{version \thisversion}}
 %
 % \maketitle
 %
-% \makeatletter\begingroup\let\@thefnmark\@empty\let\@makefntext\@firstofone
-% \footnotetext{\noindent
-% This documentation is produced with the +DocStrip+ utility.
-% \begin{tabbing}
-% \qquad\=\smex\=To get the documentation, \= run (thrice):\quad\= \texttt{pdflatex \thisfile.dtx} \\
-% \qquad\>\>To get the index, \> run:\>\texttt{makeindex -s gind.ist \thisfile.idx} \\
-% \>\smex\>To get the package, \> run:\>        \texttt{etex \thisfile.dtx}
-% \end{tabbing}§
-% The \xext{dtx} file is embedded into this pdf file thank to \xpackage{embedfile} by H. Oberdiek.}
-% \endgroup\makeatother
+% {\makeatletter\let\@thefnmark\@empty\let\@makefntext\@firstofone
+% \footnotetext{\noindent\parskip=0pt\scriptsize
+% This documentation is produced with the \textt{DocStrip} utility.\par
+% \begin{tabu}{X[-3]X[-1]X}
+% \smex To get the package,                   &run:          &\texttt{etex \thisfile.dtx}                  \\
+% \smex To get the documentation              &run (thrice): &\textt{pdflatex \thisfile.dtx}               \\
+% \leavevmode\hphantom\smex To get the index, &run:          &\texttt{makeindex -s gind.ist \thisfile.idx}
+% \end{tabu}§
+% The \xext{dtx} file is embedded into this pdf file thank to \Xpackage{embedfile} by H. Oberdiek.}
+% }
 %
 % \deffootnote{1em}{0pt}{\rlap{\thefootnotemark.}\kern1em}
 %
-% ^^A----------------------------------------------------------------------------
-% \vskip-48pt
-% \begin{abstract}\parindent0pt\noindent\leftskip1cm\rightskip\leftskip\lastlinefit0%
-%
-% {\db\xpackage{mylatexformat.ltx}} can be used to make a format from any \LaTeX{} file.
-% \medskip
+% {\let\quotation\relax\let\endquotation\relax\vspace*{-1cm}%
+% \begin{abstract}\parskip\smallskipamount\parindent0pt\lastlinefit0\leftskip.7cm\rightskip\leftskip
 %
+% \thispackage can be used to make a format from the preamble of any \LaTeX{} file.
 % The use of formats helps to speed up compilations: packages which have been
-% dumped in the format are loaded at very high speed.
-% \medskip
+% dumped in the format are loaded at very high speed. A format (also known as \emph{dump}) is therefore very suitable:
+% \begin{itemize}[label=\textendash,leftmargin=3em]
+% \item if you have many documents that shares the same preamble,
+% \item if you have a document which loads a large amount of packages (like \xpackage{TikZ} graphics libraries).
+% \end{itemize}
 %
-% The format is usually made from the preamble of a \xext{tex} file. But with
-% \thispackage, you may stop the format at any point in the preamble
-% using the command \csbf[\rred]{endofdump} before \textttbf{\csbf{begin}\{document\}}.%
 % \medskip
 %
-% As far as I am concerned, I'm using MikTeX and have not been able to test the
-% file on other systems. However, the portability of \TeX{} documents is well known...
+% \thispackage will dump all definitions until \cs{begin}\M*{document} or \csref{endofdump}, more precisely:
+%
+% \csdef{tabu*}{\begingroup\tabcolsep0pt\begin{tabu}}
+% \csdef{endtabu*}{\end{tabu}\endgroup}
+% \definecolor{ly}{rgb}{1,1,.35}
+%
+% \hskip-2em
+% \begin{tabu}to \linewidth{XXX[1.2]}
+%
+% \fcolorbox{black}{ly}{%
+% \begin{tabu*}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...}  \\
+% \cs{usepackage}\M*{...}     \\
+% \noindent\,\,...       \\
+% \noindent\,\,...       \\
+% \csbf{begin}{\bfseries\M*{document}}
+% \end{tabu*}}
+% &
+% \begin{tabu*}{X}
+% \fcolorbox{black}{ly}{%
+% \begin{tabu}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...}  \\
+% \cs{usepackage}\M*{...}     \\
+% \csbf{endofdump}       \\
+% \end{tabu}} \\
+% \noindent\,\, ... \\
+% \noindent\,\,\cs{begin}\M*{document}
+% \end{tabu*}
+% &
+% \begin{tabu*}{X}
+% \fcolorbox{black}{ly}{%
+% \begin{tabu*}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...}  \\
+% \cs{usepackage}\M*{...}     \\
+% \csbf{csname} \texttbf{endofdump}\csbf{endcsname}       \\
+% \end{tabu*}} \\
+% \noindent\,\, ... \\
+% \noindent\,\,\cs{begin}\M*{document}
+% \end{tabu*}
+% \end{tabu}
+% \medskip
 %
-% I've been using \xpackage{mylatexformat.ltx} with \LaTeX{}, pdf\TeX{} and Xe\TeX{} and it worked fine...
+% The colored parts correspond to the format. The \xext{log} file will report:
+%
+% \begin{tabu}{@{}X|[pkgcolor]X}
+% \begin{tabu}{>{\ttfamily}X[l]}
+% start reading document "my document" \\
+% on input line *** (\cs{begin}\M*{document})
+% \end{tabu}
+% &
+% \begin{tabu}{>{\ttfamily}X[l]}
+% start reading document "my document" \\
+% on input line *** (\cs{endofdump})
+% \end{tabu}
+% \end{tabu}
 % \medskip
 %
-% \thispackage was primarily a written from \Xpackage[carlisle]{mylatex.ltx}[ from David Carlisle (1994/09/27)],
-% but is different in many points (see \ref{mylatex}).
+% \thispackage was primarily a written from \href{{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/mylatex.html}}{\xpackage{mylatex}}
+% by David Carlisle, but it is different in many points (see \ref{mylatex}). In particular, \thispackage allows to put almost
+% any package in the format, with one exception: the package \href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/minitoc.html}{\xpackage{minitoc}}
+% cannot be included in the format (you must use \csref{endofdump} before \cs{usepackage}\M*{minitoc}).
 %
 % \end{abstract}
+% }
 %
-% \DeleteShortVerb{\+}\enlargethispage{2\baselineskip}
-% \cftbeforesecskip=4pt plus2pt minus2pt
-% \cftbeforesubsecskip=0pt plus2pt minus2pt
-% \renewcommand\contentsname{Contents\quad\leaders\vrule height3.4pt depth-3pt\hfill\null\kern0pt\vskip-6pt}
-% ^^A\vskip-.8\baselineskip
+% \tocsetup{
+%     section/skip=4pt plus2pt minus2pt,
+%     subsection/skip=4pt plus2pt minus2pt,
+%     title=Contents,
+%     title/after={\pkgcolor\quad\leaders\vrule height3.4pt depth-3pt\hfill\null},
+%     after=\leavevmode{\pkgcolor\hrule},
+%     twocolumns,
+%     bookmark={text=Contents,bold},
+% }
 % \tableofcontents
-% \leavevmode\leaders\vrule height3.4pt depth-3pt\hfill\null
 % \clearpage
-% ^^A----------------------------------------------------------------------------
 %
-% \hypersetup{bookmarksopenlevel=3}
 %
-% ^^A\clearpage
 % \MakeShortVerb{\+}
 %
 % \section{Creating a format}
@@ -322,9 +464,8 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %
 % Full example:§§
 % \begin{VerbLines}
-%  etex -initialize -interaction=nonstopmode
-%                   -save-size=20000 -stack-size=20000
-%                   -jobname="Mon Beau Format Perso"
+%  etex -initialize -save-size=20000 -stack-size=20000
+%                   -jobname="The-Name-Of-The-.fmt-File(without .fmt extension)"
 %                   "&pdflatex" mylatexformat.ltx """Mon Fichier TeX.tex"""
 % \end{VerbLines}
 %
@@ -347,6 +488,10 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %
 % As I pointed out in the \texttt{abstract}, I have not been able to test the file on other distributions.
 %
+% Some users told me they typed the following command line:
+%
+% \quad+latex -ini -jobname="thenameoffmtfile" "&latex" mylatexformat.ltx  """abc.tex"""+
+%
 % \section{Using a format}
 %
 % \subsection{Using MikTeX}
@@ -375,7 +520,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %      the creation of the format (execution of \cs{dump}) at begin document. \\
 %      However, the \textbf{initial definition of the macro \csbf{document}} is saved
 %      and reloaded after the format has been loaded. \\
-%      Therefore, package that modifies this macro (such as \Xpackage[oberdiek/auxhook]{auxhook}[ H. Oberdiek] or
+%      Therefore, packages that modifies this macro (such as \Xpackage[oberdiek/auxhook]{auxhook}[ H. Oberdiek] or
 %      \Xpackage{etoolbox}[ P. Lehman] cannot be included in the format!
 % \item If your document starts with :\\
 %              \verb+\begin{document}% commentary+ or with :\\
@@ -412,8 +557,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 % \StopEventually{
 % }
 %
-% \clearpage
-% \IMPLEMENTATION
+% \IMPLEMENTATION\DeleteShortVerb{\+}
 %
 %    \begin{macrocode}
 %<*package>
@@ -421,7 +565,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %%%                           mylatexformat.ltx
 %%%                           ^^^^^^^^^^^^^^^^^
 %%% From an original idea by David Carlisle - mylatex.ltx 1994/09/27
-%%% © lppl 2010 - F Chervet - 2010/08/09
+%%% © lppl 2010-2011 - F Chervet - 2011/01/12
 %%% _____________________________________________________________________
 %%%
 %%% Use this file to make a format based on the preamble of any LaTeX
@@ -572,22 +716,37 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %%
 %% Save the original definition.
 \makeatletter
-\let\etex@primitive@openout\openout
+\let\etex@primitive@openout \openout
 \let\ltx@listfiles\listfiles
 \def\openout#1 {\g@addto@macro\MYLATEX@opens{\immediate\openout#1 }}
 \def\MYLATEX@opens{%
    \let\openout\etex@primitive@openout
    \let\etex@primitive@openout\@undefined
 }% \MYLATEX@opens
+\def\MYLATEX@cmap@hook{%
+   \@for\x:={lae,lfe,lgr,ot1,ot1tt,ot6,t1,t2a,t2b,t2c,t5}\do{%
+      \expandafter\MYLATEX@cmap@h@@k \x\@nil
+      \uppercase\expandafter{\expandafter\MYLATEX@cmap@h@@k \x\@nil}}%
+   \global\let\MYLATEX@cmap@h@@k \@undefined
+   \global\let\MYLATEX@cmap@hook \@undefined
+}% \MYLATEX@cmap@hook
+\def\MYLATEX@cmap@h@@k #1\@nil{%
+   \ifcsname cmap@set@#1\endcsname
+      \global\expandafter\let\csname cmap@set@#1\endcsname \@undefined
+   \fi
+}% \MYLATEX@cmap@h@@k
 %% \begin is overloaded in order to stop \dump at begin document
 %% if the macro \endofdump is not given somewhere in the preamble.
 %% Rem: it is NOT POSSIBLE to redefine \document, for the macro
 %%      \document is changed or patched by some classes or packages
 %%      (auxhook, etoolbox etc.)
-\let\MYLATEX@ltx@begin\begin
-\def\begin#1{\csname @\expandafter\ifx\csname#1\endcsname\document first\else second\fi oftwo\endcsname
-   \endofdump
-   {\MYLATEX@ltx@begin{#1}}%
+\let\MYLATEX@ltx@begin \begin
+\def\begin#1{%
+   \expandafter \ifx\csname#1\endcsname\document
+      \expandafter\expandafter\expandafter\endofdump
+      \expandafter\@gobble
+   \else \expandafter\MYLATEX@ltx@begin
+   \fi{#1}%
 }% \begin
 %% The version of \document to use on the initex run.
 %% Just preloads some fonts, puts back \document and \openout,
@@ -608,9 +767,10 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
       \ifdefined\footnotesize\footnotesize\fi
       \ifdefined\tiny\tiny\fi
    }}%
-   \let\openout\etex@primitive@openout% just in case - normally not necessary
-   \let\begin\MYLATEX@ltx@begin
-   \let\MYLATEX@ltx@begin\@undefined
+   \let\openout \etex@primitive@openout% just in case - normally not necessary
+   \let\begin \MYLATEX@ltx@begin
+   \let\MYLATEX@ltx@begin \@undefined
+   \MYLATEX@cmap@hook
    \makeatother
    \everyjob\expandafter{\the\everyjob
       \begingroup
@@ -624,14 +784,17 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
  }
 %% Banner for \everyjob.
 \edef\MYLATEXcustomised#1#2#3\typeout#4{%
-   \noexpand\typeout{==============================================================================}%
-   \noexpand\typeout{JOB NAME\noexpand\@spaces\noexpand\@spaces\noexpand\space\noexpand\space:%
+   \noexpand\typeout{%
+   ==============================================================================}%
+   \noexpand\typeout{%
+   JOB NAME\noexpand\@spaces\noexpand\@spaces\noexpand\space\noexpand\space:%
                                \string"\noexpand\jobname\string"}%
    \noexpand\typeout{CUSTOMISED FORMAT :\string"\jobname\string"}%
    \noexpand\typeout{PRELOADED FILES:}%
    #3%
-   \noexpand\typeout{==============================================================================}%
-   \noexpand\typeout{(mylatexformat)Info: starting reading document%
+   \noexpand\typeout{%
+   ==============================================================================}%
+   \noexpand\typeout{(mylatexformat)Info: start reading document
                                 \string"\noexpand\jobname\string"}%
 }% \MYLATEXcustomised
 %% While the preamble is being skipped (inside a group)
@@ -646,33 +809,34 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %% the special processing that TeX does on the first line, choosing
 %% the format, or the file name etc.
 {% Entering simple groupe (level 1) => skip the preamble
-   \catcode`\^^M=\active
-   \catcode`\& 8 %
-   \long\gdef\MYLATEX@start#1#2{%
-      \typeout{(mylatexformat)\@spaces\space\on@line.\space(%
-               \ifcase#1 \string\endofdump\else\string\begin{document}\fi)}%
-      \typeout{==============================================================================}%
-      \endgroup%
-      \catcode`\^^M=5\relax \let^^M\par%
-      \MYLATEX@opens#2%
-   }% \MYLATEX@start
-  \long\gdef\MYLATEX@scan@preamble{\catcode`\^^M=13\relax%
-      \begingroup%
-         \long\def\MYLATEX@endofdump##1\endofdump##2##3&##4##5##6\MYLATEX{##5}%
-         \long\def\MYLATEX@endofdump@cs##1\csname endofdump\endcsname##2##3&##4##5##6\MYLATEX{##5}%
-         \long\def\MYLATEX@document ##1document##2##3&##4##5##6\MYLATEX{##5}%
-         \long\def\MYLATEX@begindocument##1\begin##2##3\MYLATEX##4{%
-            \MYLATEX@document ##2document&&{\MYLATEX@start1{##4}}{^^M}\MYLATEX}%
-         \long\gdef^^M##1^^M{%
-            \MYLATEX@endofdump##1\endofdump&&%
-               {\MYLATEX@start0{##1}}%
-               {\MYLATEX@endofdump@cs##1\csname endofdump\endcsname&&%
-                  {\MYLATEX@start0{##1}}%
-                  {\MYLATEX@begindocument##1\begin\relax\MYLATEX{##1}}%
-                  \MYLATEX}%
-               \MYLATEX}%
-         ^^M}%
-}% Leaving simple groupe (level 1) => start reading document
+\catcode`\^^M=\active
+\catcode`\& 8 %
+\long\gdef\MYLATEX@start#1#2{%
+   \typeout{(mylatexformat)\@spaces\space\on@line.\space(%
+            \ifcase#1 \string\endofdump\else\string\begin{document}\fi)}%
+   \typeout{%
+   ==============================================================================}%
+   \endgroup%
+   \catcode`\^^M=5\relax \let^^M\par%
+   \MYLATEX@opens#2%
+}% \MYLATEX@start
+\long\gdef\MYLATEX@scan@preamble{\catcode`\^^M=13\relax%
+   \begingroup%
+   \long\def\MYLATEX@endofdump##1\endofdump##2##3&##4##5##6\MYLATEX{##5}%
+   \long\def\MYLATEX@endofdump@cs##1\csname endofdump\endcsname##2##3&##4##5##6\MYLATEX{##5}%
+   \long\def\MYLATEX@document ##1document##2##3&##4##5##6\MYLATEX{##5}%
+   \long\def\MYLATEX@begindocument##1\begin##2##3\MYLATEX##4{%
+      \MYLATEX@document ##2document&&{\MYLATEX@start1{##4}}{^^M}\MYLATEX}%
+   \long\gdef^^M##1^^M{%
+      \MYLATEX@endofdump##1\endofdump&&%
+         {\MYLATEX@start0{##1}}%
+         {\MYLATEX@endofdump@cs##1\csname endofdump\endcsname&&%
+            {\MYLATEX@start0{##1}}%
+            {\MYLATEX@begindocument##1\begin\relax\MYLATEX{##1}}%
+            \MYLATEX}%
+         \MYLATEX}%
+^^M}% \MYLATEX@scan@preamble
+}% Leaving simple group (level 1) => start reading document
 %    \end{macrocode}
 %
 %    \begin{macrocode}
@@ -682,31 +846,38 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
 %</package>
 %    \end{macrocode}
 %
-% \DeleteShortVerb{\+}^^A\UndefineShortVerb{\+}
+% \restoregeometry\pagesetup*{foot/left/offset+=1cm}
 % \begin{History}
-% 
-%   \begin{Version}{2010/08/09 v2.9}
+%   \sectionformat\subsection{font+=\smaller,bottom=\smallskipamount,top=\medskipamount}
+%
+%   \begin{Version}{2011/01/12 v3.0}\HistLabel{3.0}
+%   \item Fix a problem with package \href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/mylatexformat.html}{\xpackage{cmap}} which could not be
+%         included in the format.
+%   \item Documentation revisited after Users' feedback (and the \href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/interfaces.html}{\xpackage{interfaces}} package).
+%   \end{Version}
+%
+%   \begin{Version}{2010/08/09 v2.9}\HistLabel{2.9}
 %   \item Modification of the macros that scan the preamble when the \xext{tex} file is compiled with its format.\\
 %     It is now possible to start a file with \cs{begin}\texttt{\{document\}} just after the format specification (\texttt{\&myformat}).
 %   \item[To do:] Command line to make the format on Linux (\texttt{-ini} instead of \texttt{-initialize} ???).
 %   \end{Version}
-% 
-%   \begin{Version}{2010/06/30 v2.1}
+%
+%   \begin{Version}{2010/06/30 v2.1}\HistLabel{2.1}
 %   \item Added: \cs{listfiles} is now available in the preamble, after \cs{endofdump}, when the document is compiled with its format.
 %   \item Documentation update.
 %   \end{Version}
 %
-%   \begin{Version}{2010/05/20 v1.2}
+%   \begin{Version}{2010/05/20 v1.2}\HistLabel{1.2}
 %   \item Fixed a bug in \cs{MYLATEXopens} \\
 %         (There was problems when including an index in the format for example...)
 %   \end{Version}
 %
-%   \begin{Version}{2010/04/30 v1.0}
+%   \begin{Version}{2010/04/30 v1.0}\HistLabel{1.0}
 %   \item First version.
 %   \end{Version}
 %
 % \end{History}
-% \clearpage
+%
 % \PrintIndex
 %
 % \Finale
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.ins b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.ins
index c6202b050b1..c68695a8993 100644
--- a/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.ins
+++ b/Master/texmf-dist/source/latex/mylatexformat/mylatexformat.ins
@@ -8,7 +8,7 @@
 %% 
 %% This is a generated file.
 %% 
-%% mylatexformat : 2010/06/30 v2.1 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+%% mylatexformat : 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
 %% 
 %% This work may be distributed and/or modified under the
 %% conditions of the LaTeX Project Public License, either
@@ -21,12 +21,12 @@
 %%    mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
 %% 
 %% mylatexformat - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
-%% Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
+%% Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
 %% 
 \input docstrip.tex
 \Msg{************************************************************************}
 \Msg{* Installation}
-\Msg{* Package 2010/08/09 v2.9 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file*}
+\Msg{* Package 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file*}
 \Msg{************************************************************************}
 
 \keepsilent
@@ -37,7 +37,7 @@
 
 This is a generated file.
 
-mylatexformat : 2010/08/08 v2.9 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+mylatexformat : 2011/01/12 v3.0 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either
@@ -50,7 +50,7 @@ and the derived files
    mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
 
 mylatexformat - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
-Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
+Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
 
 \endpreamble
 \let\MetaPrefix\DoubleperCent
@@ -60,7 +60,7 @@ Copyright (C) 2010 by Florent Chervet <florent.chervet@free.fr>
    \file{mylatexformat.ltx}{\from{mylatexformat.dtx}{package}}%
 }
 
-\askforoverwritetrue
+\askforoverwritefalse
 \generate{%
    \file{mylatexformat.drv}{\from{mylatexformat.dtx}{driver}}%
 }