trunk/Master/texmf-dist/source/latex/fixme

git-svn-id: svn://tug.org/texlive/trunk@284 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 1132 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/fixme/fixme.dtx b/Master/texmf-dist/source/latex/fixme/fixme.dtx
new file mode 100644
index 00000000000..b2a51fc947a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/fixme/fixme.dtx
@@ -0,0 +1,1060 @@
+% \iffalse                                                 -*- mode: LaTeX -*-
+%
+% fixme.dtx --- Doc file for the FiXme package (code and documentation)
+%
+% Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004 Didier Verna.
+%
+% PRCS: $Id: fixme.dtx 1.68 Mon, 31 Jan 2005 14:39:45 +0100 didier $
+%
+% Author:        Didier Verna <didier@lrde.epita.fr>
+% Maintainer:    Didier Verna <didier@lrde.epita.fr>
+% Created:       Thu Dec 10 16:04:01 1998
+% Last Revision: Wed Dec 22 14:44:26 2004
+%
+% This file is part of FiXme.
+%
+% FiXme may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.1
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.1 or later is part of all distributions of LaTeX
+% version 1999/06/01 or later.
+%
+% FiXme consists of the files listed in the file `README'.
+%
+%
+% Commentary:
+%
+% Contents management by FCM version 0.1.
+%
+%
+% Code:
+%
+%<*driver>
+\documentclass[a4paper]{ltxdoc}
+% \OnlyDescription
+% \CodelineIndex
+% \RecordChanges
+\begin{document}
+\DocInput{fixme.dtx}
+\end{document}
+%</driver>
+%
+% \fi
+%
+% \catcode`\¡=14
+% \CheckSum{800}
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%
+% ^^A $Format: "% \\newcommand\\version{v$Version$}"$
+% \newcommand\version{v3.1}
+% ^^A $Format: "% \\newcommand\\releasedate{$ReleaseDate$}"$
+% \newcommand\releasedate{2005/01/31}
+% ^^A $Format: "% \\newcommand\\packagecopyright{$LaTeXCopyright$}"$
+% \newcommand\packagecopyright{Copyright \copyright{} 1998, 1999, 2000, 2001, 2002, 2004, 2005 Didier Verna}
+% \newcommand\fixme{\textsf{FiXme}}
+% \newcommand\auctex{AUC-\TeX}
+% \MakeShortVerb{\|}
+% \date\today
+% \title{\fixme{} -- a \LaTeXe{} package for inserting fixme notes
+% in your documents \thanks{This document describes \fixme{}
+% \version, release date \releasedate.}}
+% \author{Didier Verna\\
+% \texttt{mailto:didier@lrde.epita.fr}\\
+% \texttt{http://www.lrde.epita.fr/\~{}didier/}}
+% \maketitle
+%
+%
+% \begin{abstract}
+% In the process of writing a long document, it is a common practice to leave
+% some parts unwritten or uncomplete, and come back to them later. In such
+% cases, you probably want to stick clues about which parts need to be
+% ``fixed'', where they are located, and what needs to be done. This is what I
+% call ``fixme notes''. The purpose of this package is to provide you with
+% convenient ways to insert \fixme{} notes in your documents.\par
+% The \fixme{} package is \packagecopyright{}, and distributed under the terms
+% of the LPPL license.
+% \end{abstract}
+%
+%
+% \section{Description}
+% With \fixme, you can insert different kinds of notes in your documents,
+% ranging from simple not-so-important notices to critical stuff that must
+% absolutely be fixed in the final version.\par
+% \fixme{} gives you full control on the layout of these notes: they can be
+% displayed inline (directly in the text), as marginal paragraphs (the
+% default), as footnotes and even as index entries. All these possibilities
+% can be mixed together. Additionally, you can summarize all \fixme{} notes in
+% a ``list of fixme's''.\par
+% \fixme{} notes are also recorded in the log file, and (depending on their
+% importance level) some of them are displayed on the terminal during
+% compilation. A final summary is also created at the end of the compilation
+% process.\par
+% All these features are actually available when you're working in
+% \texttt{draft} mode. In \texttt{final} mode, the behavior is slightly
+% different: any remaining critical note generates an error (the compilation
+% aborts), while non critical ones are just removed from the document's body
+% (they're still recorded in the log file though).
+%
+%
+% \section{Using \fixme}
+% First of all, please note that the \texttt{ifthen} and \texttt{verbatim}
+% packages are required. You don't have to load them explicitly though. As
+% long as \LaTeXe{} can locate them, they will be used automatically.\par
+% To use \fixme, simply say |\usepackage[|\meta{options}|]{fixme}| in the
+% preamble of your document.
+%
+% \subsection{Inserting notes}
+% \subsubsection{Macros}
+% \DescribeMacro{\fixme}
+% The main command for inserting a \fixme{} note in your document is the
+% |\fixme| macro. It takes the note to insert as its mandatory argument. Notes
+% inserted via this command are considered fatal to your document's final
+% processing (see section \ref{sec:behavior}).\par
+% \DescribeMacro{\fxnote}
+% \DescribeMacro{\fxwarning}
+% \DescribeMacro{\fxerror}
+% As of version 2.0, \fixme{} provides three new macros that insert
+% meta-comments about the document, rather than real fixmes. These
+% comments have three different importance levels: note, warning and (non
+% critical) error. The corresponding macros obey the same syntax as |\fixme|.
+% However, none of the notes inserted via these macros are fatal.
+%
+% \subsubsection{Environments}
+% \DescribeEnv{anfxnote}
+% \DescribeEnv{anfxwarning}
+% \DescribeEnv{anfxerror}
+% \DescribeEnv{afixme}
+% As of version 3.0, \fixme{} provides environments for inserting longer
+% notes. These environments take one optional argument (should be short,
+% perhaps a summary of the note) that will be used in the list of fixme's and
+% in the index if required.\par
+% The \fixme{} environments behave exactly the same way as their macro
+% counterpart, except for the layout (see section \ref{sec:layout}): as they
+% are meant for longer notes, the layout is always \texttt{inline} (and
+% possibly \texttt{index} if so required). By default, \fixme{} environments
+% are typeset in a \texttt{quotation} one.
+%
+% \subsection{Controlling the behavior of \fixme\label{sec:behavior}}
+% \DescribeEnv{final}
+% \DescribeEnv{draft}
+% The global behavior of the package is controlled via the two standard
+% options \texttt{final} and \texttt{draft}. These options are usually given
+% to |\documentclass{}| which in turn passes them to all packages.\par
+% In \texttt{draft} mode, the notes are recorded in the log file, and
+% appear in the text as specified by the layout settings (see section
+% \ref{sec:layout}). Additionally, warnings, errors and fatal errors are also
+% displayed on the terminal.\par
+% In final mode, non fatal notes (those generated by the |\fx*| commands) are
+% still logged, but they're removed from the document's body. On the other
+% hand, any remaining fatal note (generated by |\fixme|) will abort
+% compilation with an informative message. This will help you track down
+% forgotten important caveats in your document. Let me say it again: final
+% documents can only have notes, warnings, and (non critical) errors left.
+% Well, if, for some reason, you really want to compile in \texttt{final}
+% mode with critical \fixme{} notes left behind, you always have the
+% possibility to pass the \texttt{draft} option to \fixme{} directly\ldots\par
+% The \texttt{final} mode has been chosen as the default because \LaTeXe{}
+% itself behaves this way.\par
+%
+% \subsection{Controlling the notes layout\label{sec:layout}}
+% \DescribeEnv{inline}
+% \DescribeEnv{margin}
+% \DescribeEnv{footnote}
+% \DescribeEnv{index}
+% \fixme{} notes can appear in several forms (that can be combined) in your
+% document. The forms currently supported are: inline (directly in the text),
+% marginal notes, footnotes, and index entries. To activate a particular
+% layout, use the corresponding package option. By default, only the
+% \texttt{margin} layout is active.\par
+% Each layout option has a counterpart that deactivates it. The counterpart
+% option has the same name, prefixed with \texttt{no}. For instance, if you
+% don't want marginal notes, use the \texttt{nomargin} option.\par
+% \DescribeMacro{\fixme[]}
+% \DescribeMacro{\fxnote[]}
+% \DescribeMacro{\fxwarning[]}
+% \DescribeMacro{\fxerror[]}
+% As of version 3.0, \fixme{} provides a way to change the selected layout(s)
+% on a per-note basis: each note insertion command takes an optional first
+% argument that overrides the global layout. This argument consists of one or
+% more layout options (\texttt{inline}, \texttt{margin}, \texttt{footnote} and
+% \texttt{index}) separated by commas. Remember that local layouts
+% \emph{override} the global ones; they don't add to it.\par
+% On what occasion would one want to modify the layout for a particular note~?
+% Here is a typical situation: suppose you have a document in which \fixme{}
+% notes are typeset as margin paragraphs (this is the default). You would not
+% be able to put a note in a figure, because floats can't be nested in
+% \LaTeX{} (margin paragraphs are floats). In such a case, you would rather
+% inline the note, which can be done with something like
+% |\fixme[inline]{blah}|.\par
+% Finally, note that \fixme{} environments behave in a special way: they are
+% always typeset \texttt{inline}, regardless of your layout settings (they
+% respect your whish for an index though).\par
+%
+% \subsection{Controlling the notes logging}
+% \DescribeEnv{silent}
+% \DescribeEnv{nosilent}
+% As well as being displayed in the document itself, all \fixme{} notes are
+% ``logged'' in different ways: by default, simple notes are recorded in the
+% log file while the others are also displayed on the terminal output.\par
+% You have the ability to suppress all kind of logging by using the
+% \texttt{silent} option. By default, the behavior is that of
+% \texttt{nosilent}.
+%
+% \subsection{List of \fixme's}
+% \DescribeMacro{\listoffixmes}
+% \fixme{} remembers where you put \fixme{} notes in a toc-like file whose
+% extension is \texttt{lox}. The |\listoffixmes| macro generates the list of
+% all \fixme{} notes in a manner similar to that of the ``list of figures''
+% for instance. A standard layout is automatically used for the `article',
+% `report', `book' classes and their koma-script replacements. If another
+% class is used, the `article' layout is selected. Also, note that if no
+% \fixme{} note remain in the document, this macro doesn't generate an empty
+% list, but rather stays silent. It also stays silent in \texttt{final} mode,
+% regardless of the presence of remaining notes.
+%
+%
+% \section{Customizing \fixme}
+% \subsection{Customizing the notes layout}
+% \subsubsection{Macros}
+% The \texttt{inline}, \texttt{margin} and \texttt{footnote} layouts have two
+% parts: a ``prefix'' which depends on the note level, and the note
+% itself. The prefix is one of ``\fixme{} note:'', ``\fixme{} warning:'',
+% ``\fixme{} error:''  or simply ``\fixme{}:'', and appears in bold. The note
+% itself appears emphasized.
+% \DescribeMacro{\FXInline}
+% \DescribeMacro{\FXMargin}
+% \DescribeMacro{\FXFootnote}
+% These layouts are implemented thanks to the corresponding |\FX*| macros that
+% you can redefine if you whish. Each such macro takes two mandatory
+% arguments: the prefix and the note, in that order.\par
+% \DescribeMacro{\FXIndex}
+% The |\FXIndex| macro is used for the \texttt{index} layout. All \fixme{}
+% index entries appear under the ``\fixme{}'' key in the symbols section.
+% There are 4 subcategories under this key, as many as there are note levels.
+% By default, only the first 3 of them are used though (fatal errors do not
+% appear under a subkey, but directly under the \fixme{} key). The notes are
+% numbered in the index.\par
+%
+% \subsubsection{Environments}
+% \DescribeMacro{\FXEnvBegin}
+% \DescribeMacro{\FXEnvEnd}
+% The optional argument of \fixme{} environments is always typeset according
+% to the \texttt{inline} layout described above. By default, \fixme{} uses a
+% \texttt{quotation} for displaying the environments'contents. If you want to
+% change that, you can redefine the macros |\FXEnvBegin| and |\FXEnvEnd| that
+% open and close the environments.
+%
+% \subsection{Customizing the notes logging}
+% \DescribeMacro{\FXNote}
+% \DescribeMacro{\FXWarning}
+% \DescribeMacro{\FXError}
+% \DescribeMacro{\FXFatal}
+% If you want a finer control on logging, you can redefine the commands used
+% to implement it. These commands (on the left) are the ones used by
+% |\fxnote|, |\fxwarning|, |\fxerror| and |\fixme| respectively. They take the
+% note itself as mandatory argument.
+%
+% \subsection{Fancy fruit salad layout}
+% \DescribeEnv{user}
+% \DescribeMacro{\FXUser}
+% If, for some totally unjustified reason, you are not happy with the
+% available layouts, you have the ability to define your own: pass the
+% \texttt{user} option to the package (it also has its \texttt{nouser}
+% counterpart), and define an |\FXUser| macro in the following manner:\\
+% |\newcommand{\FXUser}[2]{|\meta{fancy fruit salad layout job}|}|\\ The
+% arguments are the prefix, and the note itself, in that order.\par
+% Note that the \texttt{user} option can also be used in the optional argument
+% of the notes insertion commands.
+%
+% \subsection{Internationalization}
+% \DescribeEnv{english}
+% \DescribeEnv{french}
+% \DescribeEnv{francais}
+% \DescribeEnv{spanish}
+% \DescribeEnv{italian}
+% \DescribeEnv{german}
+% \DescribeEnv{ngerman}
+% \DescribeEnv{danish}
+% \fixme{} currently supports English, French, Spanish, Italian, German and
+% Danish. You can select the language you want to use by passing the
+% corresponding option (these options are usually given directly to
+% |\documentclass{}| which in turn passes them to all packages). The
+% \texttt{french} and \texttt{francais} options are synonyms. The
+% \texttt{german} and \texttt{ngerman} options are currently equivalent.\par
+% If you want a finer grain on the language-dependent parts of \fixme{}, the
+% following macros are provided and can be redefined.\par
+% \DescribeMacro{\fixmenoteprefix}
+% \DescribeMacro{\fixmewarningprefix}
+% \DescribeMacro{\fixmeerrorprefix}
+% \DescribeMacro{\fixmefatalprefix}
+% \DescribeMacro{\fixmelogo}
+% The |\fixme*prefix| macros define the prefix for the four different note
+% levels. They make intensive use of the macro |\fixmelogo| ;-)\par
+% \DescribeMacro{\fixmeindexname}
+% \DescribeMacro{\fixmenoteindexname}
+% \DescribeMacro{\fixmewarningindexname}
+% \DescribeMacro{\fixmeerrorindexname}
+% \DescribeMacro{\fixmefatalindexname}
+% The macro |\fixmeindexname| defines the main \fixme{} index key. The other
+% ones define the different index subkeys for each note level. Please note that
+% an empty name for a subkey means that you don't actually want a subcategory
+% (that's the case by default for fatal errors). The corresponding notes will
+% then appear directly under the main \fixme{} key. For that reason, a non
+% empty subkey must end with an exclamation mark.\par
+% \DescribeMacro{\listfixmename}
+% |\listfixmename| defines the title for the ``list of fixmes'' section.
+%
+% ^^A\subsection{Counters}
+% ^^A \DescribeMacro{\thefixmecount}
+% ^^A \DescribeMacro{\thefixmenotecount}
+% ^^A \DescribeMacro{\thefixmewarningcount}
+% ^^A \DescribeMacro{\thefixmeerrorcount}
+% ^^A \DescribeMacro{\thefixmefatalcount}
+% ^^A As of \fixme{} version 2.0, four counters are provided. They count
+% ^^A respectively the total number of \fixme{} notes, and the number of
+% ^^A level-specific ones. At the end of processing, a \fixme{} usage summary is
+% ^^A displayed and logged.
+%
+%
+% \section{\auctex{} support}
+% \auctex{} is a powerful major mode for editing \TeX{} documents in
+% \textsf{Emacs} or \textsf{XEmacs}. In particular, it provides automatic
+% completion of macro names once they are known. \fixme{} supports \auctex{}
+% by providing a style file named \texttt{fixme.el} which contains \auctex{}
+% definitions for the relevant macros. This file should be installed in a
+% place where \auctex{} can find it (usually in a subdirectory of your
+% \LaTeX{} styles directory). Please refer to the \auctex{} documentation for
+% more information on this.
+%
+% \section{Changes}
+% \begin{itemize}
+% \item[v3.1] Fix bug reported by Arnold Beckmann: the environments were
+% visible in final mode.
+% \item[v3.0] Added environments corresponding to the note insertion
+% commands.\\
+% Added an optional first argument to the note insertion commands
+% to change the layout locally.\\
+% Fix bug reported by Akim Demaille: marginal notes could mess up the
+% document's layout by flushing it right.
+% \item[v2.2] New option \texttt{silent} to suppress notes logging\\
+% Support for Danish thanks to Kim Rud Bille |<krbi01@control.auc.dk>|
+% \item[v2.1] Use |\nobreakspace| instead of the tilda character. This avoids
+% conflicts with Babel in Spanish environments.\\
+% Fix bug reported by Knut Lickert: index entries were unconditionally built.
+% \item[v2.0] New feature: note levels\\
+% New feature: \fixme{} note counters and usage summary\\
+% Suggestions from Kasper B. Graversen |<kbg@dkik.dk>|\\
+% Support for Spanish thanks to Agust\'in Mart\'in |<agusmba@terra.es>|
+% \item[v1.5] New appearance option: \texttt{inline}.
+% \item[v1.4] Support for the koma-script classes\\
+% Fix bug reported by Ulf Jaenicke-Roessler: the |\listoffixmes| command
+% didn't work when called before the first \fixme{} note.
+% \item[v1.3] Support for Italian thanks to Riccardo Murri |<murri@phc.unipi.it>|
+% \item[v1.2] Support for German thanks to Harald Harders |<h.harders@tu-bs.de>|
+% \end{itemize}
+%
+% \StopEventually{\par Well, I think that's it. Enjoy using \fixme{}!
+%   \vfill\hfill\small \packagecopyright{}.}
+%
+% \section{The Code}
+% \begin{macro}{\fixmelogo}
+%   Here's the preamble:
+% \end{macro}
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}
+¡$Format: "\\ProvidesPackage{fixme}[$ReleaseDate: 2004/10/19$ v$Version: 2.3$"$
+\ProvidesPackage{fixme}[2005/01/31 v3.1
+                        Insert fixme notes in your documents]
+
+\RequirePackage{ifthen}
+\RequirePackage{verbatim}
+
+\newcommand*\fixmelogo{\textsf{FiXme}}
+
+%    \end{macrocode}
+% \subsection{List macros}
+% \begin{macro}{\listoffixmes}
+%   \begin{macro}{\listoffixmes@final}
+%     \begin{macro}{\listoffixmes@draft}
+%       |\listoffixmes| is empty by default. The |final| or |draft| options
+%       will provide the proper definition. Lists are output in a document
+%       class dependant fashion. Classes currently recognized are article,
+%       report, book and their koma-script replacements.
+%
+%       In order to prevent the List of Fixme's chapter heading from being
+%       generated when there are no fixmes, a test on the existence of the lox
+%       file is performed. There's a slight bug left however: after removing
+%       the last fixme, one ends up with an empty lox file, so the heading
+%       still appear. Previously, this was done by checking if some fixmes
+%       were given, but that was buggy: the list of fixme's could not appear
+%       before the first fixme note\ldots I should try to detect whether the
+%       file is empty.
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand\listoffixmes{}
+\def\listoffixmes@final{}
+\def\listoffixmes@draft{%
+  \IfFileExists{\jobname .lox}{\@listoffixmes@pretoc}{}%
+  \@starttoc{lox}%
+  \IfFileExists{\jobname .lox}{\@listoffixmes@posttoc}{}%
+  }
+
+%    \end{macrocode}
+% \begin{macro}{\listfixmename}
+%   In order to redefine the list title, users have to call |\renewcommand|.
+%   I don't like this much: it would be cleaner to provide a real command
+%   that redefines the title internally. However, I'll stick with the
+%   current scheme because it is consistent with the rest of \LaTeXe's lists.
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\listfixmename{}
+
+%    \end{macrocode}
+%
+% \subsubsection{Standard classes}
+% \begin{macro}{\listoffixmes@pretoc@article}
+%   \begin{macro}{\listoffixmes@posttoc@article}
+%     \begin{macro}{\l@fixme@article}
+%       Let's start with the article version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@article{%
+  \section*{\listfixmename%
+    \@mkboth{\MakeUppercase\listfixmename}{\MakeUppercase\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@article{}
+\def\l@fixme@article{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+% \begin{macro}{\listoffixmes@pretoc@report}
+%   \begin{macro}{\listoffixmes@posttoc@report}
+%     \begin{macro}{\l@fixme@report}
+%       Here's the report version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@report{%
+  \if@twocolumn
+    \@restonecoltrue\onecolumn
+  \else
+    \@restonecolfalse
+  \fi
+  \chapter*{\listfixmename%
+    \@mkboth{\MakeUppercase\listfixmename}{\MakeUppercase\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@report{\if@restonecol\twocolumn\fi}
+\def\l@fixme@report{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+% \begin{macro}{\listoffixmes@pretoc@book}
+%   \begin{macro}{\listoffixmes@posttoc@book}
+%     \begin{macro}{\l@fixme@book}
+%       And here's the book version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@book{%
+  \if@twocolumn
+    \@restonecoltrue\onecolumn
+  \else
+    \@restonecolfalse
+  \fi
+  \chapter*{\listfixmename%
+    \@mkboth{\MakeUppercase\listfixmename}{\MakeUppercase\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@book{\if@restonecol\twocolumn\fi}
+\def\l@fixme@book{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+%
+% \subsubsection{koma-script classes}
+% \begin{macro}{\listoffixmes@pretoc@scrartcl}
+%   \begin{macro}{\listoffixmes@posttoc@scrartcl}
+%     \begin{macro}{\l@fixme@scrartcl}
+%       Let's start with the scrartcl version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@scrartcl{%
+  \section*{\listfixmename%
+    \@mkboth{\listfixmename}{\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@scrartcl{}
+\def\l@fixme@scrartcl{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+% \begin{macro}{\listoffixmes@pretoc@scrreprt}
+%   \begin{macro}{\listoffixmes@posttoc@scrreprt}
+%     \begin{macro}{\l@fixme@scrreprt}
+%       Here's the scrreprt version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@scrreprt{%
+  \if@twocolumn
+    \@restonecoltrue\onecolumn
+  \else
+    \@restonecolfalse
+  \fi
+  \chapter*{\listfixmename%
+    \@mkboth{\listfixmename}{\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@scrreprt{\if@restonecol\twocolumn\fi}
+\def\l@fixme@scrreprt{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+% \begin{macro}{\listoffixmes@pretoc@scrbook}
+%   \begin{macro}{\listoffixmes@posttoc@scrbook}
+%     \begin{macro}{\l@fixme@scrbook}
+%       And here's the scrbook version:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@listoffixmes@pretoc@scrbook{%
+  \if@twocolumn
+    \@restonecoltrue\onecolumn
+  \else
+    \@restonecolfalse
+  \fi
+  \chapter*{\listfixmename%
+    \@mkboth{\listfixmename}{\listfixmename}}%
+  }
+\def\@listoffixmes@posttoc@scrbook{\if@restonecol\twocolumn\fi}
+\def\l@fixme@scrbook{\@dottedtocline{1}{1.5em}{2.3em}}
+
+%    \end{macrocode}
+%
+% \subsection{Layout macros}
+% \begin{macro}{\FXInline}
+%   \begin{macro}{\FXMargin}
+%     \begin{macro}{\FXFootnote}
+%       The macros to implement different layouts for the fixme notes:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand\FXInline[2]{%
+  \textbf{#1}: \emph{#2}}
+\newcommand\FXMargin[2]{%
+  \marginpar{\footnotesize\raggedleft\textbf{#1}: \emph{#2}}}
+\newcommand\FXFootnote[2]{%
+  \footnote{\textbf{#1}: \emph{#2}}}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmeindexname}
+%   \begin{macro}{\FXIndex}
+%     The macros for index generation:
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmeindexname{}
+\newcommand\FXIndex[1]{%
+  \index{***@\fixmeindexname:!#1}}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmefatalprefix}
+% \begin{macro}{\FiXmeInline}
+%   \begin{macro}{\FiXmeMargin}
+%     \begin{macro}{\FiXmeFootnote}
+%       \begin{macro}{\FiXmeUser}
+%         \begin{macro}{\FiXmeIndex}
+%           \begin{macro}{\FiXmeInfo}
+%             \begin{macro}{\FiXmeWarning}
+%               Apart from |\fixmefatalprefix|, the following macros are kept
+%               only to preserve backward compatibility. They are used only by
+%               critical notes and are made to call the new versions by
+%               default:
+%             \end{macro}
+%           \end{macro}
+%         \end{macro}
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmefatalprefix{}
+\newcommand\FiXmeInline[1]{\FXInline{\fixmefatalprefix}{#1}}
+\newcommand\FiXmeMargin[1]{\FXMargin{\fixmefatalprefix}{#1}}
+\newcommand\FiXmeFootnote[1]{\FXFootnote{\fixmefatalprefix}{#1}}
+\newcommand\FiXmeUser[1]{}
+\let\FiXmeUser\empty
+
+\newcommand\FiXmeIndex[1]{\FXIndex{#1}}
+\newcommand\FiXmeInfo[1]{}
+\newcommand\FiXmeWarning[1]{}
+
+%    \end{macrocode}
+% Booleans that control which layouts are selected:
+%    \begin{macrocode}
+\newif\iffixme@inline
+\newif\iffixme@margin
+\newif\iffixme@footnote
+\newif\iffixme@user
+\newif\iffixme@index
+
+%    \end{macrocode}
+% \begin{macro}{\fixme@text}
+%   This macro implements the common (textual) part of all notes:
+% \end{macro}
+%    \begin{macrocode}
+\def\fixme@text#1#2{%
+  \iffixme@inline\FXInline{#1}{#2}\fi%
+  \iffixme@margin\FXMargin{#1}{#2}\fi%
+  \iffixme@footnote\FXFootnote{#1}{#2}\fi%
+  \iffixme@user\FXUser{#1}{#2}\fi}
+
+%    \end{macrocode}
+% Options that control which layouts are selected:
+%    \begin{macrocode}
+\DeclareOption{inline}{\fixme@inlinetrue}
+\DeclareOption{noinline}{\fixme@inlinefalse}
+\DeclareOption{margin}{\fixme@margintrue}
+\DeclareOption{nomargin}{\fixme@marginfalse}
+\DeclareOption{footnote}{\fixme@footnotetrue}
+\DeclareOption{nofootnote}{\fixme@footnotefalse}
+\DeclareOption{user}{\fixme@usertrue}
+\DeclareOption{nouser}{\fixme@userfalse}
+\DeclareOption{index}{\fixme@indextrue}
+\DeclareOption{noindex}{\fixme@indexfalse}
+
+%    \end{macrocode}
+% The following options are here for backward compatibility, but are not used
+% anymore:
+%    \begin{macrocode}
+\DeclareOption{info}{}
+\DeclareOption{noinfo}{}
+\DeclareOption{warning}{}
+\DeclareOption{nowarning}{}
+
+%    \end{macrocode}
+%
+% \subsection{Logging macros}
+% \begin{macro}{\FXNote}
+%   \begin{macro}{\FXWarning}
+%     \begin{macro}{\FXerror}
+%       \begin{macro}{\FXFatal}
+%         The macros forcontrolling logging (log file and terminal output):
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand\FXNote[1]{%
+  \GenericInfo{%
+    (FiXme)\@spaces\@spaces\@spaces\@spaces}{%
+    Package FiXme Note: `#1'}}
+\newcommand\FXWarning[1]{%
+  \PackageWarning{FiXme}{`#1'}}
+\newcommand\FXError[1]{%
+  \GenericWarning{%
+    (FiXme)\@spaces\@spaces\@spaces\@spaces}{%
+    Package FiXme Error: `#1'}}
+\newcommand\FXFatal[1]{%
+  \GenericWarning{%
+    (FiXme)\@spaces\@spaces\@spaces\@spaces}{%
+    Package FiXme: `#1'}}
+
+%    \end{macrocode}
+% Boolean that control wether to stay silent or not:
+%    \begin{macrocode}
+\newif\iffixme@silent
+
+%    \end{macrocode}
+%% Options that control whether to be silent or not:
+%    \begin{macrocode}
+\DeclareOption{silent}{\fixme@silenttrue}
+\DeclareOption{nosilent}{\fixme@silentfalse}
+
+%    \end{macrocode}
+%
+% \subsection{\fixme{} notes}
+% Here are the counters:
+% \DescribeMacro{\thefixmecount}
+% \DescribeMacro{\thefixmenotecount}
+% \DescribeMacro{\thefixmewarningcount}
+% \DescribeMacro{\thefixmeerrorcount}
+% \DescribeMacro{\thefixmefatalcount}
+%    \begin{macrocode}
+\newcounter{fixmecount}
+\newcounter{fixmenotecount}
+\newcounter{fixmewarningcount}
+\newcounter{fixmeerrorcount}
+\newcounter{fixmefatalcount}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmenoteprefix}
+%   \begin{macro}{\fixmenoteindexname}
+%     \begin{macro}{\fixme@note@draft}
+%       \begin{macro}{\fixme@note@final}
+%         The different flavors of fixme notes. Proper definitions will be
+%         selected by the |draft| or |final| options. Let's start with the
+%         note notes:
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmenoteprefix{}
+\newcommand*\fixmenoteindexname{}
+\def\fixme@note@draft#1{%
+  \fixme@text{\fixmenoteprefix}{#1}%
+  \iffixme@index\FXIndex{\fixmenoteindexname\thefixmenotecount: #1}\fi%
+  \iffixme@silent\else\FXNote{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmenoteprefix: #1}}
+\def\fixme@note@final#1{%
+  \iffixme@silent\else\FXNote{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmenoteprefix: #1}}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmewarningprefix}
+%   \begin{macro}{\fixmewarningindexname}
+%     \begin{macro}{\fixme@warning@draft}
+%       \begin{macro}{\fixme@warning@final}
+%         Here are the warnings notes:
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmewarningprefix{}
+\newcommand*\fixmewarningindexname{}
+\def\fixme@warning@draft#1{%
+  \fixme@text{\fixmewarningprefix}{#1}%
+  \iffixme@index\FXIndex{\fixmewarningindexname\thefixmewarningcount: #1}\fi%
+  \iffixme@silent\else\FXWarning{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmewarningprefix: #1}}
+\def\fixme@warning@final#1{%
+  \iffixme@silent\else\FXWarning{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmewarningprefix: #1}}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmeerrorprefix}
+%   \begin{macro}{\fixmeerrorindexname}
+%     \begin{macro}{\fixme@error@draft}
+%       \begin{macro}{\fixme@error@final}
+%         Here are the errors notes:
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmeerrorprefix{}
+\newcommand*\fixmeerrorindexname{}
+\def\fixme@error@draft#1{%
+  \fixme@text{\fixmeerrorprefix}{#1}%
+  \iffixme@index\FXIndex{\fixmeerrorindexname\thefixmeerrorcount: #1}\fi%
+  \iffixme@silent\else\FXError{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmeerrorprefix: #1}}
+\def\fixme@error@final#1{%
+  \iffixme@silent\else\FXError{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmeerrorprefix: #1}}
+
+%    \end{macrocode}
+% \begin{macro}{\fixmefatalindexname}
+%   \begin{macro}{\fixme@fatal@draft}
+%     \begin{macro}{\fixme@fatal@final}
+%       And here are the fatal ones:
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\newcommand*\fixmefatalindexname{}
+\def\fixme@fatal@draft#1{%
+  \iffixme@inline\FiXmeInline{#1}\fi%
+  \iffixme@margin\FiXmeMargin{#1}\fi%
+  \iffixme@footnote\FiXmeFootnote{#1}\fi%
+  \iffixme@user\FiXmeUser{#1}\fi%
+  \iffixme@index\FiXmeIndex{%
+    \fixmefatalindexname\thefixmefatalcount: #1}\fi%
+  \iffixme@silent\else\FXFatal{#1}\fi%
+  \addcontentsline{lox}{fixme}{\fixmefatalprefix: #1}}
+\def\fixme@fatal@final#1{%
+  \PackageError{FiXme}{`#1' fixme left in final version}{%
+    You are processing your document in final mode,\MessageBreak
+    but you still have some critical FiXme's left behind.\MessageBreak
+    Type X to quit, fix your document, and rerun LaTeX.}}
+
+%    \end{macrocode}
+% \begin{macro}{\@fixme}
+%   \begin{macro}{\fxnote}
+%     \begin{macro}{\fxwarning}
+%       \begin{macro}{\fxerror}
+%         \begin{macro}{\fixme}
+%           Here are the notes insertion macros. The different versions are
+%           |\let| to the draft of final flavors defined above by the
+%           \texttt{draft} or \texttt{final} options.
+%         \end{macro}
+%       \end{macro}
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\def\@@fixme#1#2{%
+  \stepcounter{fixmecount}%
+  \stepcounter{fixme#1count}%
+  \csname fixme@#1\endcsname{#2}}
+\def\@fixme#1[#2]#3{%
+  \bgroup%
+  \fixme@inlinefalse%
+  \fixme@marginfalse%
+  \fixme@footnotefalse%
+  \fixme@userfalse%
+  \fixme@indexfalse%
+  \@for\fixme@option:=#2\do{%
+    \expandafter\ifx\csname fixme@\fixme@option true\endcsname\relax
+      \PackageError{FiXme}{Unknown layout option `\fixme@option'}{%
+        You have given an invalid option to \string\fixme, %
+        or an \string\fx command.\MessageBreak
+        Valid options are `inline', `margin', `footnote' and `index'.%
+        \MessageBreak
+        Type X to quit, fix your document, and rerun LaTeX.}%
+      \else%
+      \csname fixme@\fixme@option true\endcsname%
+    \fi}%
+  \@@fixme{#1}{#3}%
+  \egroup}
+\newcommand\fxnote{\@ifnextchar[%]
+  {\@fixme{note}}{\@@fixme{note}}}
+\newcommand\fxwarning{\@ifnextchar[%]
+  {\@fixme{warning}}{\@@fixme{warning}}}
+\newcommand\fxerror{\@ifnextchar[%]
+  {\@fixme{error}}{\@@fixme{error}}}
+\newcommand\fixme{\@ifnextchar[%]
+  {\@fixme{fatal}}{\@@fixme{fatal}}}
+
+%    \end{macrocode}
+%
+% \subsection{\fixme{} environments}
+% The \fixme{} environments use the corresponding macro version to handle
+% inline (and possibly index) layout, and to perform logging. In final mode,
+% verbatim's \texttt{comment} environment is used to suppress output.
+%    \begin{macrocode}
+\newcommand\FXEnvBegin{\begin{quotation}}
+\newcommand\FXEnvEnd{\end{quotation}}
+
+\def\@fxenvbegin@draft#1#2{%
+  \FXEnvBegin
+  \edef\fixme@args{inline\iffixme@index,index\fi}%
+  \csname#1\endcsname[\fixme@args]{#2}}
+\def\@fxenvbegin@final#1#2{
+  \edef\fixme@args{inline\iffixme@index,index\fi}%
+  \csname#1\endcsname[\fixme@args]{#2}
+  \comment
+}
+
+\def\@fxenvend@draft{\FXEnvEnd}
+\def\@fxenvend@final{\endcomment}
+
+\newenvironment{anfxnote}[1][]{%
+  \@fxenvbegin{fxnote}{#1}}{%
+  \@fxenvend}
+\newenvironment{anfxwarning}[1][]{%
+  \@fxenvbegin{fxwarning}{#1}}{%
+  \@fxenvend}
+\newenvironment{anfxerror}[1][]{%
+  \@fxenvbegin{fxerror}{#1}}{%
+  \@fxenvend}
+\newenvironment{afixme}[1][]{%
+  \@fxenvbegin{fixme}{#1}}{%
+  \@fxenvend}
+
+%    \end{macrocode}
+%
+% \subsection{Language processing}
+% Options that control which language is selected:
+%    \begin{macrocode}
+\DeclareOption{english}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Note}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Warning}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Error}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Notes:!}
+  \renewcommand*\fixmewarningindexname{**b@Warnings:!}
+  \renewcommand*\fixmeerrorindexname{**c@Errors:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{List of Corrections}}
+\DeclareOption{french}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Note}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Attention}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Erreur}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Notes:!}
+  \renewcommand*\fixmewarningindexname{**b@Avertissements:!}
+  \renewcommand*\fixmeerrorindexname{**c@Erreurs:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{Liste des Corrections}}
+\DeclareOption{francais}{\ExecuteOptions{french}}
+\DeclareOption{spanish}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Nota}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Aviso}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Error}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Notas:!}
+  \renewcommand*\fixmewarningindexname{**b@Avisos:!}
+  \renewcommand*\fixmeerrorindexname{**c@Errores:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{Lista de Correcciones}}
+\DeclareOption{italian}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Nota}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Avviso}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Errore}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Note:!}
+  \renewcommand*\fixmewarningindexname{**b@Avvisi:!}
+  \renewcommand*\fixmeerrorindexname{**c@Errori:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{Corrigenda}}
+\DeclareOption{german}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Anm}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Warnung}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Fehler}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Anmerkungen:!}
+  \renewcommand*\fixmewarningindexname{**b@Warnungen:!}
+  \renewcommand*\fixmeerrorindexname{**c@Fehler:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{Verzeichnis der Korrekturen}}
+\DeclareOption{ngerman}{%
+  \ExecuteOptions{german}}
+\DeclareOption{danish}{%
+  \renewcommand*\fixmenoteprefix{\fixmelogo\nobreakspace Note}
+  \renewcommand*\fixmewarningprefix{\fixmelogo\nobreakspace Advarsel}
+  \renewcommand*\fixmeerrorprefix{\fixmelogo\nobreakspace Fejl}
+  \renewcommand*\fixmefatalprefix{\fixmelogo}
+  \renewcommand*\fixmeindexname{\fixmelogo}
+  \renewcommand*\fixmenoteindexname{**a@Noter:!}
+  \renewcommand*\fixmewarningindexname{**b@Advarsler:!}
+  \renewcommand*\fixmeerrorindexname{**c@Fejl:!}
+  \renewcommand*\fixmefatalindexname{}
+  \renewcommand*{\listfixmename}{Rettelser}}
+
+%    \end{macrocode}
+%
+% \subsection{Document status processing}
+% \begin{macro}{\fixme@note}
+%   \begin{macro}{\fixme@warning}
+%     \begin{macro}{\fixme@error}
+%       Here's where the draft or final version of the internal macros are
+%       selected.
+%     \end{macro}
+%   \end{macro}
+% \end{macro}
+%    \begin{macrocode}
+\DeclareOption{final}{
+  \let\fixme@note\fixme@note@final
+  \let\fixme@warning\fixme@warning@final
+  \let\fixme@error\fixme@error@final
+  \let\fixme@fatal\fixme@fatal@final
+  \let\@fxenvbegin\@fxenvbegin@final
+  \let\@fxenvend\@fxenvend@final
+  \let\listoffixmes\listoffixmes@final
+  }
+
+\DeclareOption{draft}{
+  \let\fixme@note\fixme@note@draft
+  \let\fixme@warning\fixme@warning@draft
+  \let\fixme@error\fixme@error@draft
+  \let\fixme@fatal\fixme@fatal@draft
+  \let\@fxenvbegin\@fxenvbegin@draft
+  \let\@fxenvend\@fxenvend@draft
+  \let\listoffixmes\listoffixmes@draft
+  \@ifclassloaded{article}{
+    \let\@listoffixmes@pretoc\@listoffixmes@pretoc@article
+    \let\@listoffixmes@posttoc\@listoffixmes@posttoc@article
+    \let\l@fixme\l@fixme@article}{
+    \@ifclassloaded{report}{
+      \let\@listoffixmes@pretoc\@listoffixmes@pretoc@report
+      \let\@listoffixmes@posttoc\@listoffixmes@posttoc@report
+      \let\l@fixme\l@fixme@report}{
+      \@ifclassloaded{book}{
+        \let\@listoffixmes@pretoc\@listoffixmes@pretoc@book
+        \let\@listoffixmes@posttoc\@listoffixmes@posttoc@book
+        \let\l@fixme\l@fixme@book}{
+        \@ifclassloaded{scrartcl}{
+          \let\@listoffixmes@pretoc\@listoffixmes@pretoc@scrartcl
+          \let\@listoffixmes@posttoc\@listoffixmes@posttoc@scrartcl
+          \let\l@fixme\l@fixme@scrartcl}{
+          \@ifclassloaded{scrreprt}{
+            \let\@listoffixmes@pretoc\@listoffixmes@pretoc@scrreprt
+            \let\@listoffixmes@posttoc\@listoffixmes@posttoc@scrreprt
+            \let\l@fixme\l@fixme@scrreprt}{
+            \@ifclassloaded{scrbook}{
+              \let\@listoffixmes@pretoc\@listoffixmes@pretoc@scrbook
+              \let\@listoffixmes@posttoc\@listoffixmes@posttoc@scrbook
+              \let\l@fixme\l@fixme@scrbook}{
+              %% Use the article layout by default.
+              \let\@listoffixmes@pretoc\@listoffixmes@pretoc@article
+              \let\@listoffixmes@posttoc\@listoffixmes@posttoc@article
+              \let\l@fixme\l@fixme@article}
+            }
+          }
+        }
+      }
+    }
+  }
+
+%    \end{macrocode}
+% Put us in \texttt{english} and \texttt{final} mode, and enable the marginal
+% notes.
+%    \begin{macrocode}
+\ExecuteOptions{english,final,margin,nosilent}
+\ProcessOptions*
+
+%    \end{macrocode}
+% Finally, ensure backward compatibility for |\fixme| with |\FiXmeUser|, and
+% output a summary giving the number of fixme notes at the end of the
+% compilation:
+%    \begin{macrocode}
+\AtBeginDocument{%
+  \ifx\FiXmeUser\empty
+    \renewcommand\FiXmeUser[1]{\FXUser{\fixmefatalprefix}{#1}}
+  \fi}
+
+\AtEndDocument{%
+  \GenericWarning{%
+    (FiXme)\@spaces\@spaces\@spaces\@spaces
+  }{%
+    Package FiXme Summary: Number of notes: \thefixmenotecount,\MessageBreak%
+    Number of warnings: \thefixmewarningcount,\MessageBreak%
+    Number of errors: \thefixmeerrorcount,\MessageBreak%
+    Number of fatal errors: \thefixmefatalcount,\MessageBreak%
+    Total: \thefixmecount\@gobble%
+  }}
+%    \end{macrocode}
+%
+% ^^A \PrintChanges
+% ^^A \PrintIndex
+% \Finale
+%
+% ^^A fixme.dtx ends here.
diff --git a/Master/texmf-dist/source/latex/fixme/fixme.ins b/Master/texmf-dist/source/latex/fixme/fixme.ins
new file mode 100644
index 00000000000..37f55d91374
--- /dev/null
+++ b/Master/texmf-dist/source/latex/fixme/fixme.ins
@@ -0,0 +1,72 @@
+%%% fixme.ins --- Installation file for FiXme              -*- mode: LaTeX -*-
+
+%% Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004 Didier Verna.
+
+%% PRCS: $Id: fixme.ins 1.15 Tue, 19 Oct 2004 11:16:38 +0200 didier $
+
+%% Author:        Didier Verna <didier@lrde.epita.fr>
+%% Maintainer:    Didier Verna <didier@lrde.epita.fr>
+%% Created:       Thu Dec 10 16:04:01 1998
+%% Last Revision: Tue Oct 19 11:08:45 2004
+
+%% This file is part of FiXme.
+
+%% FiXme may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.1
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%% http://www.latex-project.org/lppl.txt
+%% and version 1.1 or later is part of all distributions of LaTeX
+%% version 1999/06/01 or later.
+
+%% FiXme consists of the files listed in the file `README'.
+
+
+%%% Commentary:
+
+%% Contents management by FCM version 0.1.
+
+
+%%% Code:
+
+\NeedsTeXFormat{LaTeX2e}
+\input docstrip.tex
+\keepsilent
+
+\preamble
+^^J^^J
+%% $Format: "$TextCopyright$^^J"$
+Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005 Didier Verna^^J
+This file is part of FiXme.^^J
+FiXme may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.1
+of this license or (at your option) any later version.
+The latest version of this license is in
+http://www.latex-project.org/lppl.txt
+and version 1.1 or later is part of all distributions of LaTeX
+version 1999/06/01 or later.^^J
+FiXme consists of the files listed in the file `README'.^^J
+\endpreamble
+
+\catcode`\¡=14
+\generate{\file{fixme.sty}{\from{fixme.dtx}{}}}
+
+\Msg{}
+\Msg{,----------}
+\Msg{|}
+\Msg{| You have two more things to do to finish the installation:}
+\Msg{|}
+\Msg{| * Typeset the documentation by running LaTeX on the file `fixme.dtx'.}
+\Msg{| * Install `fixme.sty' and `fixme.dvi' anywhere you see fit.}
+\Msg{|}
+\Msg{| If you're an AUC-TeX user, you can also install the file `fixme.el' in}
+\Msg{| a suitable AUC-TeX style directory.}
+\Msg{|}
+\Msg{| Have fun!}
+\Msg{|}
+\Msg{`----------}
+\Msg{}
+
+\endbatchfile
+
+%%% fixme.ins ends here