new package dyntree (19aug06)

git-svn-id: svn://tug.org/texlive/trunk@2015 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 1179 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/dyntree/dyntree.dtx b/Master/texmf-dist/source/latex/dyntree/dyntree.dtx
new file mode 100644
index 00000000000..a96a917d295
--- /dev/null
+++ b/Master/texmf-dist/source/latex/dyntree/dyntree.dtx
@@ -0,0 +1,1139 @@
+% \iffalse
+%
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{dyntree}
+%<package> [2006/08/14 v1 Dynkin Tree Typsetting]
+%<package>\RequirePackage{coollist}
+%<package>\RequirePackage{calc}
+%<package>\RequirePackage{epic}
+%<package>\RequirePackage{eepic}
+%<package>\RequirePackage{amsmath}
+%<package>\RequirePackage{amssymb}
+%
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{dyntree}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\begin{document}
+\DocInput{dyntree.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \iffalse meta-comment
+% remove this comment to get a checksum
+% \CheckSum{0}
+% \fi
+%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%
+% \changes{v1.0}{2006/08/14}{Initial Release}
+%
+% \GetFileInfo{dyntree.sty}
+%
+% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ ,\!,\(,\),\,}
+% \DoNotIndex{\@ne,\expandafter}
+% \DoNotIndex{\advance,\begingroup,\catcode,\closein,\errmessage}
+% \DoNotIndex{\newcommand,\renewcommand,\providecommand}
+% \DoNotIndex{\closeout,\day,\def,\edef,\xdef,\gdef,\let,\empty,\endgroup}
+% \DoNotIndex{\newcounter,\providecounter,\addtocounter,\setcounter,\stepcounter,\value,\arabic,\the}
+% \DoNotIndex{\if,\fi,\ifthenelse,\else,\setboolean,\boolean,\newboolean,\provideboolean,\equal,\AND,\OR,\NOT,\whiledo}
+% \DoNotIndex{\ifcase,\ifcat,\or,\else}
+% \DoNotIndex{\par,\parbox,\mbox,\hbox,\begin,\end,\nabla,\partial}
+% \DoNotIndex{\overline,\bar,\small,\tiny,\mathchoice,\scriptsize,\textrm,\texttt}
+% \DoNotIndex{\alpha,\beta,\gamma,\epsilon,\varepsilon,\delta,\zeta,\eta,\theta,\vartheta,\iota,\kappa,\lambda,\mu,\nu}
+% \DoNotIndex{\xi,\omicron,\pi,\varpi,\rho,\varrho,\sigma,\tau,\upsilon,\phi,\varphi,\chi,\psi,\omega}
+% \DoNotIndex{\Delta,\Gamma,\Theta,\Lambda,\Xi,\Pi,\Sigma,\Phi,\Psi,\Omega}
+% \DoNotIndex{\digamma,\lceil,\rceil,\lfloor,\rfloor,\left,\right,\inp,\inb,\inbr,\inap,\nop}
+% \DoNotIndex{\sum,\prod,\int,\log,\ln,\exp,\sin,\cos,\tan,\csc,\sec,\cot,\arcsin,\arccos,\arctan,\det}
+% \DoNotIndex{\sinh,\cosh,\tanh,\csch,\sech,\coth,\arcsinh,\arccosh,\arctanh}
+% \DoNotIndex{\mod,\max,\min,\gcd,\lcm,\wp,\arg,\dots,\infty,}
+% \DoNotIndex{\frac,\binom,\braket,\@@atop}
+% \DoNotIndex{\cdot,\ldots,\tilde,\times,\dagger,\relax}
+% \DoNotIndex{\mathbb,\roman,\bf,\mathord,\cal,\DeclareMathOperator,\PackageError,\PackageWarning}
+% \DoNotIndex{\csname,\endcsname,\ifx,\ifnum}
+% \DoNotIndex{\makeatother,\makeatletter}
+% \DoNotIndex{\copy,\setbox,\usebox,\newbox}
+% \DoNotIndex{\addtolength,\setlength,\newlength,\unitlength,\settoheight,\settodepth,\settowidth,\lengthtest}
+% \DoNotIndex{\drawline,\line,\put}
+% \DoNotIndex{
+% \DYNTREE@temparray,\DYNTREE@templen,\DYNTREE@tempboxnum,\DYNTREE@tempxCoord,
+% \DYNTREE@tempinsert,\DYNTREE@temproot,\DYNTREE@tempswap,\DYNTREE@temprootX}
+%
+% \title{The \textsf{dyntree} package\thanks{This document
+% corresponds to \textsf{dyntree}~\fileversion,
+% dated~\filedate.}}
+% \author{nsetzer}
+%
+% \maketitle
+%
+% \setcounter{IndexColumns}{2}
+% \StopEventually{\PrintChanges\PrintIndex}
+%
+% The \textsf{dyntree} package is intended for users needing to typeset a dykin tree---a group theoretical construct 
+% consisting of cartan coefficients in boxes connected by a series of lines.  
+% This package makes it easy for the user to generate these objects by allowing the user to specify only the 
+% cartan coefficients and the root number(s) that they connect to below.
+%
+% This package requires the \textsf{coollist} package, which is not a standard \LaTeX package but is available at CTAN.
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%\section{Basics}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% To create a Dynkin Tree Diagram, the syntax is as follows \DescribeEnv{dyntree} \DescribeMacro{\dynbox}:
+%
+% |\start{dyntree}|\marg{num\_roots}
+%
+% |\dynbox|\marg{cartan\_coefficients}\marg{cvs\_descendant\_root\_list} |\lend|
+%
+% $\vdots$
+%
+% |\finish{dyntree}|
+%
+% where 
+%
+% \meta{num\_roots} is an integer indicating the number of simple roots
+%
+% \meta{cartan\_coefficients} is an \emph{ampersand} (\&) delimited list of cartan coefficients 
+% (the number of which \emph{must} be equal to \meta{num\_roots}
+%
+% \meta{cvs\_descendant\_root\_list} is a comma delimited list of integers indicating which simple root can be lowered
+% from this box.  The simple roots are numbered from left to right starting at $1$ and ending at \meta{num\_roots}
+%
+%
+% Thus, if the group of interest had $3$ simple roots, each |\dynbox| would have a \meta{cartan\_coefficients} with three entries; that is, it would be a list with three integers as in 
+%
+% \begin{center}
+% |1 & 0 & 0|
+% \end{center}
+%
+% and the list \meta{cvs\_descendant\_root\_list} would have at most three entries (but it need not have exactly three entries) with the entries being between $1$ and $3$.  The entry $1$ would correspond to the first (left-most) simple root being lowered, the entry $2$ the second simple root, and $3$ the third:
+% 
+% \DeleteShortVerb{\|}
+% \begin{center}
+% \begin{picture}(200,70)
+% \put(20,40){simple root:}
+% \put(80,40){$\begin{array}{ccc} 1 & 2 & 3 \end{array}$}
+% \put(80,30){$\begin{array}{|ccc|} \hline 1 & 0 & 0 \\ \hline \end{array}$}
+% \end{picture}
+% \end{center}
+% \MakeShortVerb{\|}
+%
+% So, finally, an entry such as
+%
+% \begin{center}
+% |\dynbox{-1 & 0 & 0}{1,3}|
+% \end{center}
+%
+% would specify that the program should draw two lines below the box \DeleteShortVerb{\|} $\begin{array}{|ccc|} \hline 1 & 0 & 0 \\ \hline \end{array}$ \MakeShortVerb{\|}; one for the first simple root, and another for the third simple root.  The resulting portion of the diagram would look like
+%
+% \begin{center}
+% \start{dyntree}{3}
+% \dynbox{-1 & 0 & 0}{1,3} \lend
+% \finish{dyntree}
+% \end{center}
+% 
+% \makeatletter
+% \vspace{\DYNTREE@levelsep}
+% \makeatother
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{Quirks}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% There are two quirks with this package, and they are
+% \begin{itemize}
+% \item{if there are multiple Dynkin Tree Diagrams required for your document, you \emph{must} enclose each tree in braces}
+% \item{The lowest state (bottom-most dynbox) must have a non-empty entry in \meta{cvs\_descendant\_root\_list} even though no lines are to be drawn from it.  To meet both criteria, place a zero in this spot.}
+% \end{itemize}
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{Examples}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \newcounter{examples}
+% \setcounter{examples}{1}
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Example \theexamples} \stepcounter{examples} 
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \begin{verbatim}
+% {
+% \start{dyntree}{2}
+% \dynbox{3 & 0}{1} \lend
+% \dynbox{1 & 1}{1,2} \lend
+% \dynbox{2 & -1}{1}
+% \dynbox{-1 & 2}{1,2} \lend
+% \dynbox{0 & 0}{1,2}
+% \dynbox{-3 & 3}{0,2} \lend
+% \dynbox{1 & -2}{1}
+% \dynbox{-2 & 1}{0,2} \lend
+% \dynbox{-1 & -1}{0,2} \lend
+% \dynbox{0 & -3}{0} \lend
+% \finish{dyntree}
+% }
+% \end{verbatim}
+%
+% {
+% \start{dyntree}{2}
+% \dynbox{3 & 0}{1} \lend
+% \dynbox{1 & 1}{1,2} \lend
+% \dynbox{2 & -1}{1}
+% \dynbox{-1 & 2}{1,2} \lend
+% \dynbox{0 & 0}{1,2}
+% \dynbox{-3 & 3}{0,2} \lend
+% \dynbox{1 & -2}{1}
+% \dynbox{-2 & 1}{0,2} \lend
+% \dynbox{-1 & -1}{0,2} \lend
+% \dynbox{0 & -3}{0} \lend
+% \finish{dyntree}
+% }
+% 
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Example \theexamples} \stepcounter{examples} 
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \begin{verbatim}
+% \begin{center}
+% {
+% \start{dyntree}{3}
+% \dynbox{2 & 0 & 0}{1} \lend
+% \dynbox{0 & 1 & 0}{1,2} \lend
+% \dynbox{1 & -1 & 1}{1,3}
+% \dynbox{-2 & 2 & 0}{2} \lend
+% \dynbox{1 & 1 & -1}{1,2}
+% \dynbox{-1 & 0 & 1}{2,3} \lend
+% \dynbox{2 & -1 & 0}{1}
+% \dynbox{-1 & 2 & -1}{2}
+% \dynbox{0 & -2 & 2}{3} \lend
+% \dynbox{0 & 0 & 0}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+% \end{verbatim}
+%
+% \begin{center}
+% {
+% \start{dyntree}{3}
+% \dynbox{2 & 0 & 0}{1} \lend
+% \dynbox{0 & 1 & 0}{1,2} \lend
+% \dynbox{1 & -1 & 1}{1,3}
+% \dynbox{-2 & 2 & 0}{2} \lend
+% \dynbox{1 & 1 & -1}{1,2}
+% \dynbox{-1 & 0 & 1}{2,3} \lend
+% \dynbox{2 & -1 & 0}{1}
+% \dynbox{-1 & 2 & -1}{2}
+% \dynbox{0 & -2 & 2}{3} \lend
+% \dynbox{0 & 0 & 0}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+% 
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Example \theexamples} \stepcounter{examples} 
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \begin{verbatim}
+% This is a $15$ of $SU(5)$
+% 
+% \begin{center}
+% {
+% \start{dyntree}{4}
+% \dynbox{2 & 0 & 0 & 0}{1} \lend
+% \dynbox{0 & 1 & 0 & 0}{1,2} \lend
+% \dynbox{1 & -1 & 1 & 0}{1,3}
+% \dynbox{-2 & 2 & 0 & 0}{2} \lend
+% \dynbox{1 & 0 & -1 & 0}{1,4}
+% \dynbox{-1 & 0 & 1 & 0}{2,3} \lend
+% \dynbox{1 & 0 & 0 &-1}{1}
+% \dynbox{-1 & 1 & -1 & 1}{2,4}
+% \dynbox{0 & -2 & 2 & 0}{3} \lend
+% \dynbox{-1 & 1 & 0 & -1}{2}
+% \dynbox{0 & -1 & 0 & 1}{3,4} \lend
+% \dynbox{0 & -1 & 1 & -1}{3}
+% \dynbox{0 & 0 & -2 & 2}{4} \lend
+% \dynbox{0 & 0 & -1 & 0}{4} \lend
+% \dynbox{0 & 0 & 0 & -2}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+% \end{verbatim}
+%
+% This is a $15$ of $SU(5)$
+% 
+% \begin{center}
+% {
+% \start{dyntree}{4}
+% \dynbox{2 & 0 & 0 & 0}{1} \lend
+% \dynbox{0 & 1 & 0 & 0}{1,2} \lend
+% \dynbox{1 & -1 & 1 & 0}{1,3}
+% \dynbox{-2 & 2 & 0 & 0}{2} \lend
+% \dynbox{1 & 0 & -1 & 0}{1,4}
+% \dynbox{-1 & 0 & 1 & 0}{2,3} \lend
+% \dynbox{1 & 0 & 0 &-1}{1}
+% \dynbox{-1 & 1 & -1 & 1}{2,4}
+% \dynbox{0 & -2 & 2 & 0}{3} \lend
+% \dynbox{-1 & 1 & 0 & -1}{2}
+% \dynbox{0 & -1 & 0 & 1}{3,4} \lend
+% \dynbox{0 & -1 & 1 & -1}{3}
+% \dynbox{0 & 0 & -2 & 2}{4} \lend
+% \dynbox{0 & 0 & -1 & 0}{4} \lend
+% \dynbox{0 & 0 & 0 & -2}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Example \theexamples} \stepcounter{examples} 
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \begin{verbatim}
+% \begin{center}
+% {
+% \start{dyntree}{2}
+% \dynbox{0 & 2}{2} \lend
+% \dynbox{1 & 0}{1,2} \lend
+% \dynbox{2 & -2}{1}
+% \dynbox{-1 & 1}{2} \lend
+% \dynbox{0 & -1}{1} \lend
+% \dynbox{-2 & 0}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+% \end{verbatim}
+%
+% \begin{center}
+% {
+% \start{dyntree}{2}
+% \dynbox{0 & 2}{2} \lend
+% \dynbox{1 & 0}{1,2} \lend
+% \dynbox{2 & -2}{1}
+% \dynbox{-1 & 1}{2} \lend
+% \dynbox{0 & -1}{1} \lend
+% \dynbox{-2 & 0}{0} \lend
+% \finish{dyntree}
+% }
+% \end{center}
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%\section{Implementation}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{Variables and Constants}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% The \textsf{dyntree} package utilizes a picture environment to create the tree.  To do this it requires several
+% constant length values, as well as calculated length values and counters.  These are define below.
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Cartan Coefficients Box Variables}
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% The first thing to do is declare the length variables associated with a cartan coefficients box---dynbox for short.
+% These variables are
+%
+% \begin{tabular}{lp{.5\textwidth}}
+% |\DYNTREE@widechar|		& the width of a $-1$								\\
+% |\DYNTREE@thinchar|		& the width of a $1$								\\
+% |\DYNTREE@cartancoefwidth|	& the width of a cartan coefficient (a combination of $-1$ and $1$)		\\
+% |\DYNTREE@marginwidth|	& the width of the margin of the cartan coefficients box			\\
+% |\DYNTREE@colsepwidth|	& the width between columns of the cartan coefficients box			\\
+% |\DYNTREE@dynboxheight|	& the height (baseline to top) of the cartan coefficients box			\\
+% |\DYNTREE@dynboxdepth|	& the depth (baseline to bottom) of the cartan coefficients box			\\
+% |\DYNTREE@dynboxvlen|		& the full vertical height of a cartan coefficients box				\\
+% |\DYNTREE@dynboxwidth|	& the width of a dynbox (calculated based on numroots)				\\
+% \end{tabular}
+%
+%    \begin{macrocode}
+\newlength{\DYNTREE@widechar}%
+\newlength{\DYNTREE@thinchar}%
+\newlength{\DYNTREE@cartancoefwidth}%
+\newlength{\DYNTREE@marginwidth}%
+\newlength{\DYNTREE@colsepwidth}%
+\newlength{\DYNTREE@dynboxheight}%
+\newlength{\DYNTREE@dynboxdepth}%
+\newlength{\DYNTREE@dynboxvlen}%
+\newlength{\DYNTREE@dynboxwidth}%
+%    \end{macrocode}
+%
+% Now that they are declared, initialize the ``exterior" ones
+%
+%    \begin{macrocode}
+\settowidth{\DYNTREE@widechar}{$-1$}%
+\settowidth{\DYNTREE@thinchar}{$1$}%
+\setlength{\DYNTREE@cartancoefwidth}%
+	{\DYNTREE@widechar*1/2 + \DYNTREE@thinchar*1/2}%
+\settowidth{\DYNTREE@marginwidth}%
+	{$\begin{array}{|c|}\hline 1 \\ \hline \end{array}$}%
+	\addtolength{\DYNTREE@marginwidth}{-\DYNTREE@thinchar}%
+\settowidth{\DYNTREE@colsepwidth}%
+	{$\begin{array}{|cc|}\hline 1 & 1 \\ \hline \end{array}$}%
+	\addtolength{\DYNTREE@colsepwidth}{-\DYNTREE@marginwidth - \DYNTREE@thinchar*2}%
+\settoheight{\DYNTREE@dynboxheight}%
+	{$\begin{array}{|c|}\hline 1 \\ \hline \end{array}$}%
+\settodepth{\DYNTREE@dynboxdepth}%
+	{$\begin{array}{|c|}\hline 1 \\ \hline \end{array}$}%
+\setlength{\DYNTREE@dynboxvlen}{\DYNTREE@dynboxheight + \DYNTREE@dynboxdepth}%
+%    \end{macrocode}
+%
+% and now for convenience and error testing, print them out
+%
+% \makeatletter
+% \begin{tabular}{rl}
+% widechar:		& \the\DYNTREE@widechar 	\\
+% thinchar:		& \the\DYNTREE@thinchar		\\
+% cartancoefwidth:	& \the\DYNTREE@cartancoefwidth	\\
+% marginwidth:		& \the\DYNTREE@marginwidth	\\
+% colsepwidth:		& \the\DYNTREE@colsepwidth	\\
+% dynboxheight		& \the\DYNTREE@dynboxheight	\\
+% dynboxdepth		& \the\DYNTREE@dynboxdepth	\\
+% dynboxvlen		& \the\DYNTREE@dynboxvlen	\\
+% \end{tabular}
+% \makeatother
+%
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+%\subsubsection{Dynkin Tree Variables}
+% %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %%  %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% 
+% These variables are specific to the actual creation of the tree structure.
+%
+% \begin{tabular}{lp{0.55\textwidth}}
+% {\bf \Large counters}												\\
+% |DYNTREE@numlevel|		& the number of levels in the tree						\\
+% |DYNTREE@nextlevel|		& the number of the next level							\\
+% |DYNTREE@numboxes|		& counter for counting number of boxes in a row					\\
+% |DYNTREE@nextnumboxes|	& counter for counting number of boxes in the next row				\\
+% |DYNTREE@target|		& used to record the `targeted' array element when sorting			\\
+% |DYNTREE@listlen|		& the length of the list of descendents						\\
+% |DYNTREE@xCoord|		& the x coordinate in scaled points						\\
+% |DYNTREE@yCoord|		& the y coordinate in scaled points						\\
+% |DYNTREE@xPos|		& the x coordinate in scaled points						\\
+% |DYNTREE@yPos|		& the y coordinate in scaled points						\\
+% |DYNTREE@xComp|		& the x coordinate in scaled points						\\
+% |DYNTREE@yComp|		& the y coordinate in scaled points						\\
+% |DYNTREE@leftX|		& the left most x coordinate in scaled points					\\
+% |DYNTREE@ct|			& generic counter								\\
+% |DYNTREE@counter|		& generic counter								\\
+% |DYNTREE@index|		& generic counter								\\
+% |DYNTREE@root|		& the root number								\\
+% \end{tabular}
+%		
+% \begin{tabular}{lp{0.55\textwidth}}
+% {\bf \Large lengths}												\\
+% |\DYNTREE@dynboxsep|		& the distance between dynkin boxes						\\
+% |\DYNTREE@levelsep|		& the distances between each level (from dynkin box bottom to top of next layer's dynbox)
+%														\\
+% |\DYNTREE@leftmostX|		& the left most x value								\\
+% |\DYNTREE@rightmostX|		& the right most x value							\\
+% |\DYNTREE@unitlen|		& the unit length value before altering (to allow it to be restored)		\\
+% |\DYNTREE@templen|		& temporary length storage							\\
+% |\DYNTREE@holdlen|		& temporary length storage							\\
+% \end{tabular}
+%		
+% \begin{tabular}{lp{0.55\textwidth}}
+% {\bf \Large commands}												\\
+% |\DYNTREE@treestop|		& indicates the point where the gobbler stops reading (to allow \LaTeX to properly
+%				  read all the data.  Its value is |\&\&\&|					\\
+% |\DYNTREE@treeend|		& indicates the end of the tree.  It is in the definition of the gobbler.
+%				  It has a value of |\%\%\%|							\\
+% \end{tabular}
+%
+%
+% \begin{macro}{\lend}
+% \begin{macro}{\dynbox}
+%
+% And there are two external commands:
+%
+% \begin{tabular}{lp{0.75\textwidth}}
+% |\lend|			& indicates the end of one tree level. The value is never used: this token is used as
+%				  a delimiter by the user and the code. Its value, which should never be typed, 
+%				  is |\&\%\&\%|									\\
+% |\dynbox|			& indicates the start of a dynbox.  The value is never used: this token is purely for
+%				  delimiting the start of the dynbox by the user; it is only defined to satisfy the 
+%				  |\ifthenelse| statement							\\
+% \end{tabular}
+% \end{macro}
+% \end{macro}
+%
+%    \begin{macrocode}
+\newcounter{DYNTREE@numlevel}%
+\newcounter{DYNTREE@nextlevel}%
+\newcounter{DYNTREE@numboxes}%
+\newcounter{DYNTREE@nextnumboxes}%
+\newcounter{DYNTREE@target}%
+\newcounter{DYNTREE@listlen}%
+\newcounter{DYNTREE@xCoord}%
+\newcounter{DYNTREE@yCoord}%
+\newcounter{DYNTREE@xPos}%
+\newcounter{DYNTREE@yPos}%
+\newcounter{DYNTREE@xComp}%
+\newcounter{DYNTREE@yComp}%
+\newcounter{DYNTREE@leftX}%
+\newcounter{DYNTREE@ct}%
+\newcounter{DYNTREE@counter}%
+\newcounter{DYNTREE@index}%
+\newcounter{DYNTREE@root}%
+\newlength{\DYNTREE@dynboxsep}%
+\newlength{\DYNTREE@levelsep}%
+\newlength{\DYNTREE@leftmostX}%
+\newlength{\DYNTREE@rightmostX}%
+\newlength{\DYNTREE@unitlen}%
+\newlength{\DYNTREE@templen}%
+\newlength{\DYNTREE@holdlen}%
+\newcommand{\DYNTREE@treestop}{\&\&\&}%
+\newcommand{\DYNTREE@treeend}{\%\%\%}%
+\newcommand{\lend}{\&\%\&\%}%
+\newcommand{\dynbox}{}%
+%    \end{macrocode}
+%
+% Now that they are declared, initialize the ``exterior" ones
+%
+%    \begin{macrocode}
+\setlength{\DYNTREE@dynboxsep}{\DYNTREE@colsepwidth}%
+\setlength{\DYNTREE@levelsep}{1cm}%
+%    \end{macrocode}
+%
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{The Tree Eater}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% While the dynkin tree structure resembles that of an environment, it actually consists of a \LaTeX command that 
+% consumes the data, sorts it, and displays the proper items.  The basis of this consumption are several 
+% ``gobblers"---the first of which eats the tree one level at a time
+%
+%
+%    \begin{macrocode}
+\def\DYNTREE@gobbletree#1\lend#2\DYNTREE@treeend{%
+%    \end{macrocode}
+% Before the level can be processed, several things must be adjusted.  First, since a new level is beginning
+% the counter must be incremented by one
+%    \begin{macrocode}
+\addtocounter{DYNTREE@numlevel}{1}%
+%    \end{macrocode}
+% initialize the number of boxes for this level
+%    \begin{macrocode}
+\setcounter{DYNTREE@numboxes}{0}%
+%    \end{macrocode}
+% initialize the number of boxes for the next level
+%    \begin{macrocode}
+\setcounter{DYNTREE@nextnumboxes}{0}%
+%    \end{macrocode}
+% Process the level:
+%    \begin{macrocode}
+\DYNTREE@gobbledynboxes#1\lend%
+%    \end{macrocode}
+% \iffalse
+% \makeatletter
+% \begin{tabular}{lp{.55\textwidth}}
+% \multicolumn{2}{l}{{\bf ERROR CHECK}}			\\
+% level:	& \arabic{DYNTREE@numlevel}		\\
+% boxes: 	& \arabic{DYNTREE@numboxes}		\\
+% \end{tabular}
+% \makeatother
+% \fi
+% Record the number of boxes for this level
+%    \begin{macrocode}
+\expandafter\xdef%
+	\csname DYNTREE@level@\roman{DYNTREE@numlevel}@numbox\endcsname%
+	{\arabic{DYNTREE@numboxes}}%
+%    \end{macrocode}
+% Now check for the signal to stop processing
+%    \begin{macrocode}
+\ifthenelse{ \equal{#2}{\DYNTREE@treestop} }%
+	{%
+%    \end{macrocode}
+%	The End---just do nothing
+%    \begin{macrocode}
+	}%
+% Else
+	{%
+%    \end{macrocode}
+% continue processing levels until the end of the tree
+%    \begin{macrocode}
+	\DYNTREE@gobbletree#2\DYNTREE@treeend%
+	}%
+}%
+%    \end{macrocode}
+%
+%
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{The Box Eater}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% The second ``gobbler" eats the boxes one by one:
+%
+%    \begin{macrocode}
+\def\DYNTREE@gobbledynboxes#1\dynbox#2#3#4{%
+%    \end{macrocode}
+% increment the number of boxes
+%    \begin{macrocode}
+\addtocounter{DYNTREE@numboxes}{1}%
+%    \end{macrocode}
+% \iffalse
+%! boxnum: \arabic{DYNTREE@numboxes}
+% \fi
+% Store the boxes for this level in registers
+%    \begin{macrocode}
+\expandafter\newbox%
+	\csname DYNTREE@box@\roman{DYNTREE@numlevel}@\roman{DYNTREE@numboxes}\endcsname%
+\expandafter\setbox%
+	\csname DYNTREE@box@\roman{DYNTREE@numlevel}@\roman{DYNTREE@numboxes}\endcsname=%
+	\hbox{$\begin{array}{|*{\DYNTREE@numroots}{c}|}\hline #2 \\ \hline \end{array}$}%
+%    \end{macrocode}
+% Calculate the X value for each descendent and place in sorted list
+%
+% * Get the length of the list
+%    \begin{macrocode}
+\listlenstore{DYNTREE@listlen}{#3}%
+\expandafter\xdef
+	\csname DYNTREE@childline@\roman{DYNTREE@numlevel}@\roman{DYNTREE@numboxes}@boxnum\endcsname%
+		{\arabic{DYNTREE@listlen}}%
+\ifthenelse{\value{DYNTREE@listlen} > \DYNTREE@numroots}%
+	{%
+	\PackageError{dyntree}%
+		{%
+		Length of descendant of \arabic{DYNTREE@numboxes}%
+	 	on level \arabic{DYNTREE@numlevel} exceeds number of roots%
+	 	(\DYNTREE@numroots)%
+	 	}%
+	}%
+% Else
+	{}%
+%    \end{macrocode}
+% * store the list in a temp variable for convenience in typing, store it more permanently for use later on.
+%    \begin{macrocode}
+\liststore{#3}{DYNTREE@templist@}%
+\liststore{#3}%
+	{DYNTREE@childlist@\roman{DYNTREE@numlevel}@\roman{DYNTREE@numboxes}@}%
+%    \end{macrocode}
+% * go through the list and generate the sorted 'array' |DYNTREE@level@|\meta{level}|@|\meta{boxnum}|@X|
+%    \begin{macrocode}
+\setcounter{DYNTREE@ct}{1}%
+\whiledo{	\NOT \(\value{DYNTREE@ct} > \value{DYNTREE@listlen}\) \AND 
+		\NOT\(\value{DYNTREE@ct} > \DYNTREE@numroots\)			}%
+	{%
+%    \end{macrocode}
+	% need to store the `root' value in a counter to retrieve the data
+%    \begin{macrocode}
+	\setcounter{DYNTREE@counter}{\csname DYNTREE@templist@\roman{DYNTREE@ct}\endcsname}%
+%    \end{macrocode}
+	% check that the number submitted is within the allowed range
+%    \begin{macrocode}
+	\ifthenelse{	\(\value{DYNTREE@counter} > \DYNTREE@numroots\) \OR 
+			\(\value{DYNTREE@counter} < 1\) 			}%
+		{%
+		\ifthenelse{\value{DYNTREE@counter} = 0}%
+			{%
+%    \end{macrocode}
+			% Do nothing - this is the last level
+%    \begin{macrocode}
+			}%
+		% Else
+			{%
+			\PackageError{dyntree}%
+				{%
+				Descendant root of \arabic{DYNTREE@numboxes} on level%
+				 \arabic{DYNTREE@numlevel} out of bounds%
+				 (\arabic{DYNTREE@counter} > \DYNTREE@numroots)%
+				}%
+			}%
+		}%
+	% Else
+		{%
+%    \end{macrocode}
+		% temporarily store the length
+%    \begin{macrocode}
+		\setlength{\DYNTREE@templen}%
+			{\csname DYNTREE@level@\roman{DYNTREE@numlevel}@\roman{DYNTREE@numboxes}@X\endcsname}%
+		\addtolength{\DYNTREE@templen}%
+			{\csname DYNTREE@rootX@\roman{DYNTREE@counter}\endcsname*(-1)}%
+%    \end{macrocode}
+		% adjust the left most length
+%    \begin{macrocode}
+		\ifthenelse{\DYNTREE@templen < \DYNTREE@leftmostX}%
+			{%
+			\setlength{\DYNTREE@leftmostX}{\DYNTREE@templen}%
+			}%
+		% Else
+			{}%
+%    \end{macrocode}
+		% adjust right most length
+%    \begin{macrocode}
+		\setlength{\DYNTREE@holdlen}{\DYNTREE@templen}%
+		\addtolength{\DYNTREE@holdlen}{\DYNTREE@dynboxwidth}%
+		\ifthenelse{ \DYNTREE@holdlen > \DYNTREE@rightmostX }%
+			{%
+			\setlength{\DYNTREE@rightmostX}{\DYNTREE@holdlen}%
+			}%
+		% Else
+			{}%
+%    \end{macrocode}
+		% now store the x value for the line
+%    \begin{macrocode}
+		\setlength{\DYNTREE@holdlen}%
+			{\expandafter\csname DYNTREE@dynboxX@\roman{DYNTREE@counter}\endcsname}%
+		\addtolength{\DYNTREE@holdlen}{\DYNTREE@templen}%
+		\setcounter{DYNTREE@xPos}{\DYNTREE@holdlen}%
+%    \end{macrocode}
+		% \iffalse
+		%! \begin{tabular}{cc}
+		%! rootX.\roman{DYNTREE@counter}	& \csname DYNTREE@rootX@\roman{DYNTREE@counter}\endcsname	\\
+		%! DYNTREE@numlevel:		& \arabic{DYNTREE@numlevel}				\\
+		%! numboxes:		& \arabic{DYNTREE@numboxes}				\\
+		%! templen: 		& \the\DYNTREE@templen					\\
+		%! \end{tabular}
+		%! 
+		% \fi
+		% |counter| has served its purpose and may be used in another context
+		%
+		% add the length to the sorted 'array'
+		%
+		% * initialize the counter to the END of the array
+%    \begin{macrocode}
+		\setcounter{DYNTREE@counter}{\value{DYNTREE@nextnumboxes}}%
+%    \end{macrocode}
+		% * get the value of the next level
+%    \begin{macrocode}
+		\setcounter{DYNTREE@nextlevel}{\value{DYNTREE@numlevel} + 1}%
+%    \end{macrocode}
+		% * Check for array elements
+%    \begin{macrocode}
+		\ifthenelse{\value{DYNTREE@counter} = 0}%
+			{%
+%    \end{macrocode}
+			% set the first element as the length
+%    \begin{macrocode}
+			\expandafter\xdef%
+				\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@i@X\endcsname%
+					{\the\DYNTREE@templen}%
+%    \end{macrocode}
+			% increment the number of elements
+%    \begin{macrocode}
+			\addtocounter{DYNTREE@nextnumboxes}{1}%
+			}%
+		% Else
+			{%
+%    \end{macrocode}
+			% there is at least one element
+%    \begin{macrocode}
+			\edef\DYNTREE@temparray%
+				{\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@counter}@X\endcsname}%
+			\edef\DYNTREE@tempinsert{\the\DYNTREE@templen}%
+%    \end{macrocode}
+			% \iffalse
+			%! \begin{tabular}{cc}
+			%! nextnumboxes:	& \arabic{DYNTREE@nextnumboxes}					\\
+			%! nextlevel:	& \arabic{DYNTREE@nextlevel}						\\
+			%! counter:	& \arabic{DYNTREE@counter}						\\
+			%! temparray:	& \DYNTREE@temparray							\\
+			%! level\&\roman{DYNTREE@nextlevel}\&\roman{DYNTREE@counter}\&X
+			%! 		& 
+			%!	\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@counter}@X\endcsname	
+			%!											\\
+			%! tempinsert:	& \DYNTREE@tempinsert							\\
+			%! \end{tabular}
+			% \fi
+			% find where element should be inserted
+%    \begin{macrocode}
+			\whiledo{	\(\value{DYNTREE@counter} > 0\) \AND 
+					\lengthtest{\DYNTREE@tempinsert < \DYNTREE@temparray}		}%
+				{%
+				\edef\DYNTREE@temparray%
+				{\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@counter}@X\endcsname}%
+				\addtocounter{DYNTREE@counter}{-1}%
+				}%
+%    \end{macrocode}
+			% the thing needs to be inserted at \value{DYNTREE@counter} + 1
+%    \begin{macrocode}
+			\setcounter{DYNTREE@target}{\value{DYNTREE@counter} + 1}%
+%    \end{macrocode}
+			% \iffalse
+			%! \begin{tabular}{cc}
+			%! target: \arabic{DYNTREE@target}		\\
+			%! temparray:	& \DYNTREE@temparray		\\
+			%! tempinsert:	& \DYNTREE@tempinsert		\\
+			%! \end{tabular}	
+			%!
+			%!
+			% \fi
+			% if they aren't equal, move from target to nextnumboxes up to target+1 to nextnumboxes+1
+%    \begin{macrocode}
+			\ifthenelse{ \NOT \lengthtest{\DYNTREE@tempinsert = \DYNTREE@temparray} }%
+				{%
+				\setcounter{DYNTREE@counter}{\value{DYNTREE@nextnumboxes} + 1}%
+				\whiledo{ \value{DYNTREE@counter} > \value{DYNTREE@target} }%
+					{%
+%    \end{macrocode}
+					% get the value in the array spot one before
+%    \begin{macrocode}
+					\addtocounter{DYNTREE@counter}{-1}%
+					\edef\DYNTREE@tempswap%
+						{%
+				\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@counter}@X\endcsname%
+						}%
+%    \end{macrocode}
+					% store this value in the next array spot
+%    \begin{macrocode}
+					\addtocounter{DYNTREE@counter}{1}%
+					\expandafter\xdef%
+				\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@counter}@X\endcsname%
+						{\DYNTREE@tempswap}%
+					\addtocounter{DYNTREE@counter}{-1}%
+					}%
+%    \end{macrocode}
+				% insert the original
+%    \begin{macrocode}
+				\expandafter\xdef%
+				\csname DYNTREE@level@\roman{DYNTREE@nextlevel}@\roman{DYNTREE@target}@X\endcsname%
+					{\DYNTREE@tempinsert}%
+%    \end{macrocode}
+				% increment the number of boxes in the next level
+%    \begin{macrocode}
+				\addtocounter{DYNTREE@nextnumboxes}{1}%
+				}%
+			% Else
+				{%
+%    \end{macrocode}
+				% Do nothing
+%    \begin{macrocode}
+				}%
+			}%
+		}%
+	\addtocounter{DYNTREE@ct}{1}%
+	}%
+\ifthenelse{\equal{#4}{\lend}}%
+	{%
+	}%
+% Else
+	{%
+%    \end{macrocode}
+%	% Eat the boxes until there are no more
+%    \begin{macrocode}
+	\DYNTREE@gobbledynboxes#4%
+	}%
+}%
+%    \end{macrocode}
+%
+%
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+%\subsection{The Dyntree Environment}
+% % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % % %
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% Dynkin Tree Environment
+%
+%
+%    \begin{macrocode}
+\def\start#1#2#3\finish#4%
+{%
+\ifthenelse{\equal{#1}{#4} \AND \equal{#4}{dyntree}}%
+	{%
+	\providecommand{\DYNTREE@numroots}{#2}%
+%    \end{macrocode}
+	% \iffalse
+	%! \DYNTREE@numroots
+	% \fi
+	% Initialize Interior Dynkin Box Variables
+%    \begin{macrocode}
+	\setlength{\DYNTREE@dynboxwidth}
+		{%
+		\DYNTREE@marginwidth + 
+		\DYNTREE@cartancoefwidth*\DYNTREE@numroots + 
+		\DYNTREE@colsepwidth*(\DYNTREE@numroots-1)
+		}%
+%    \end{macrocode}
+	% Initialize Interior Dynkin Tree Variables
+%    \begin{macrocode}
+	\setlength{\DYNTREE@leftmostX}{0pt}%
+	\setlength{\DYNTREE@rightmostX}{\DYNTREE@dynboxwidth}%
+%    \end{macrocode}
+	% the highest left starts at zero, so initialize this value
+%    \begin{macrocode}
+	\expandafter\gdef\csname DYNTREE@level@i@i@X\endcsname{0pt}%
+%    \end{macrocode}
+	% There are no levels, so initialize |numlevel| to zero
+%    \begin{macrocode}
+	\setcounter{DYNTREE@numlevel}{0}%
+%    \end{macrocode}
+	% Determine the root lines and dynkin box offsets
+%    \begin{macrocode}
+	\setcounter{DYNTREE@ct}{1}%
+	\whiledo{\NOT \(\value{DYNTREE@ct}>\DYNTREE@numroots\)}%
+		{%
+%    \end{macrocode}
+		% Calculate the length and store it in a temporary length
+%    \begin{macrocode}
+		\setlength{\DYNTREE@templen}%
+			{%
+			  (\DYNTREE@dynboxwidth + \DYNTREE@dynboxsep)*\value{DYNTREE@ct}%
+			 -(\DYNTREE@dynboxwidth + \DYNTREE@dynboxsep)*1/2%
+			 -(\DYNTREE@dynboxwidth + \DYNTREE@dynboxsep)*\DYNTREE@numroots/2%
+			}%
+%    \end{macrocode}
+		% \iffalse
+		%! ct: \arabic{DYNTREE@ct}
+		%! templen: \the\DYNTREE@templen
+		% \fi
+		% store the actual length in a command
+%    \begin{macrocode}
+		\expandafter\xdef\csname DYNTREE@rootX@\roman{DYNTREE@ct}\endcsname%
+			{\the\DYNTREE@templen}%
+%    \end{macrocode}
+		% Calculate the dynkin box x offset and store it in a temporary length
+%    \begin{macrocode}
+		\setlength{\DYNTREE@templen}%
+			{%
+			\DYNTREE@dynboxwidth/2/\DYNTREE@numroots + 
+			\DYNTREE@dynboxwidth*(\value{DYNTREE@ct}-1)/\DYNTREE@numroots
+			}%
+%    \end{macrocode}
+		% store the actual length in a command
+%    \begin{macrocode}
+		\expandafter\xdef\csname DYNTREE@dynboxX@\roman{DYNTREE@ct}\endcsname%
+			{\the\DYNTREE@templen}%
+%    \end{macrocode}
+		% \iffalse
+		% Print the Lengths
+		%! DYNTREE@rootX@\roman{DYNTREE@ct}: \expandafter\csname DYNTREE@rootX@\roman{DYNTREE@ct}\endcsname
+		%!
+		%! DYNTREE@dynboxX@\roman{DYNTREE@ct}: \expandafter\csname DYNTREE@dynboxX@\roman{DYNTREE@ct}\endcsname
+		% \fi
+%    \begin{macrocode}
+		\addtocounter{DYNTREE@ct}{1}%
+		}%
+%    \end{macrocode}
+	% \iffalse
+	% dynboxwidth: \the\DYNTREE@dynboxwidth
+	% \fi
+	% Eat the tree
+%    \begin{macrocode}
+	\DYNTREE@gobbletree#3\DYNTREE@treestop\DYNTREE@treeend%
+%    \end{macrocode}
+	% \iffalse
+	%! numlevels: \arabic{DYNTREE@numlevel}
+	% \fi
+	% Now the data has been stored, Draw The Tree:
+	%
+	% store the current unit length to restore when finished
+%    \begin{macrocode}
+	\setlength{\DYNTREE@unitlen}{\unitlength}%
+	\setlength{\unitlength}{1sp}%
+%    \end{macrocode}
+	% get the width of the picture
+%    \begin{macrocode}
+	\setcounter{DYNTREE@xCoord}{\DYNTREE@rightmostX - \DYNTREE@leftmostX}%
+%    \end{macrocode}
+	% store the leftmost point as a counter
+%    \begin{macrocode}
+	\setcounter{DYNTREE@leftX}{\DYNTREE@leftmostX}%
+%    \end{macrocode}
+	% get the height of the picture
+%    \begin{macrocode}
+	\setcounter{DYNTREE@yCoord}%
+		{%
+		\DYNTREE@dynboxvlen*\value{DYNTREE@numlevel} + 
+		\DYNTREE@levelsep*(\value{DYNTREE@numlevel} - 1)
+		}%
+	\begin{picture}%
+		(\arabic{DYNTREE@xCoord},\arabic{DYNTREE@yCoord})%
+		(\value{DYNTREE@leftX},0)%
+	\setcounter{DYNTREE@ct}{1}%
+	\whiledo{\NOT \(\value{DYNTREE@ct} > \value{DYNTREE@numlevel}\)}%
+		{%
+		\setcounter{DYNTREE@counter}{1}%
+%    \end{macrocode}
+		% get the y coordinate as a length
+%    \begin{macrocode}
+		\setlength{\DYNTREE@templen}%
+			{%
+			  \DYNTREE@dynboxvlen*\value{DYNTREE@numlevel}
+			- \DYNTREE@dynboxvlen*\value{DYNTREE@ct}
+			+ \DYNTREE@levelsep*\value{DYNTREE@numlevel} 
+			- \DYNTREE@levelsep*\value{DYNTREE@ct}
+			+ \DYNTREE@dynboxdepth
+			}%
+%    \end{macrocode}
+		% convert the length to an integer in scaled points (sp)
+%    \begin{macrocode}
+		\setcounter{DYNTREE@yCoord}{\DYNTREE@templen}%
+		\def\DYNTREE@tempboxnum{\csname DYNTREE@level@\roman{DYNTREE@ct}@numbox\endcsname}%
+		\whiledo{\NOT \( \value{DYNTREE@counter} > \DYNTREE@tempboxnum \)}%
+			{%
+%    \end{macrocode}
+			% grab the value of the x coordinate (it's a length but not stored as one)
+%    \begin{macrocode}
+			\xdef\DYNTREE@tempxCoord%
+				{%
+				\expandafter%
+				\csname DYNTREE@level@\roman{DYNTREE@ct}@\roman{DYNTREE@counter}@X\endcsname%
+				}%
+%    \end{macrocode}
+			% convert x coordinate to a length
+%    \begin{macrocode}
+			\setlength{\DYNTREE@holdlen}{\DYNTREE@tempxCoord}%
+%    \end{macrocode}
+			% convert length to an integer in scaled points (sp)
+%    \begin{macrocode}
+			\setcounter{DYNTREE@xCoord}{\DYNTREE@holdlen}%
+%    \end{macrocode}
+			% place each dynkin box
+%    \begin{macrocode}
+			\put(\arabic{DYNTREE@xCoord},\arabic{DYNTREE@yCoord})%
+				{%
+				\expandafter%
+				\copy\csname DYNTREE@box@\roman{DYNTREE@ct}@\roman{DYNTREE@counter}\endcsname%
+				}%
+%    \end{macrocode}
+			% go through the descendants and place the lines
+%    \begin{macrocode}
+			\setcounter{DYNTREE@listlen}%
+				{%
+				\expandafter%
+				\csname DYNTREE@childline@\roman{DYNTREE@ct}@\roman{DYNTREE@counter}@boxnum\endcsname%
+				}%
+			\setcounter{DYNTREE@index}{1}%
+			\whiledo{\NOT \(\value{DYNTREE@index} > \value{DYNTREE@listlen}\)}%
+				{%
+				\xdef\DYNTREE@childroot%
+					{%
+					\expandafter%
+		\csname DYNTREE@childlist@\roman{DYNTREE@ct}@\roman{DYNTREE@counter}@\roman{DYNTREE@index}\endcsname%
+					}%
+				\ifthenelse{\NOT \DYNTREE@childroot = 0 }%
+					{%
+					\setcounter{DYNTREE@root}{\DYNTREE@childroot}%
+					\setcounter{DYNTREE@xPos}{\value{DYNTREE@xCoord}}%
+					\setcounter{DYNTREE@xComp}{\value{DYNTREE@xCoord}}%
+					\setcounter{DYNTREE@yPos}{\value{DYNTREE@yCoord}}%
+					\setcounter{DYNTREE@yComp}{\value{DYNTREE@yCoord}}%
+					\xdef\DYNTREE@temprootX%
+						{\expandafter\csname DYNTREE@rootX@\roman{DYNTREE@root}\endcsname}%
+					\setlength{\DYNTREE@templen}{\DYNTREE@temprootX}%
+					\addtocounter{DYNTREE@xPos}{\DYNTREE@templen*(-1)}%
+					\xdef\DYNTREE@dynoffset%
+						{\expandafter\csname DYNTREE@dynboxX@\roman{DYNTREE@root}\endcsname}%
+					\setlength{\DYNTREE@templen}{\DYNTREE@dynoffset}%
+					\addtocounter{DYNTREE@xPos}{\DYNTREE@templen}%
+					\addtocounter{DYNTREE@xComp}{\DYNTREE@templen}%
+					\setlength{\DYNTREE@templen}{1pt}% for frame thickness
+					\addtocounter{DYNTREE@yPos}%
+						{\DYNTREE@levelsep*(-1) - \DYNTREE@dynboxdepth - \DYNTREE@templen}%
+					\addtocounter{DYNTREE@yComp}{\DYNTREE@dynboxdepth*(-1) - \DYNTREE@templen}%
+					\put(0,0)%
+						{%
+						\drawline%
+						(\arabic{DYNTREE@xComp},\arabic{DYNTREE@yComp})%
+						(\arabic{DYNTREE@xPos},\arabic{DYNTREE@yPos})%
+						}%
+					}%
+				% Else
+					{%
+					}%
+				\addtocounter{DYNTREE@index}{1}%
+				}%
+			\addtocounter{DYNTREE@counter}{1}%
+			}%
+		\addtocounter{DYNTREE@ct}{1}%
+		}%
+	\end{picture}%
+%    \end{macrocode}
+	% restore the unit length to original value
+%    \begin{macrocode}
+	\setlength{\unitlength}{\DYNTREE@unitlen}%
+%    \end{macrocode}
+% \iffalse
+	%!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Error Check BEGIN
+	%! \setcounter{DYNTREE@ct}{1}
+	%! \whiledo{\NOT \(\value{DYNTREE@ct} > \value{DYNTREE@numlevel}\)}%
+	%! 	{%
+	%! 	\setcounter{act}{1}%
+	%! 	\def\DYNTREE@tempboxnum{\csname DYNTREE@level@\roman{DYNTREE@ct}@numbox\endcsname}
+	%! 	\whiledo{\NOT \( \value{act} > \DYNTREE@tempboxnum \)}%
+	%! 		{%
+	%! 		level.\roman{DYNTREE@ct}.\roman{act}.x: \csname DYNTREE@level@\roman{DYNTREE@ct}@\roman{act}@X\endcsname;
+	%! 
+	%! 		\addtocounter{act}{1}
+	%! 		}
+	%! 	\addtocounter{DYNTREE@ct}{1}%
+	%! 	}%
+	%! 
+	%! 
+	%! \setcounter{DYNTREE@ct}{1}%
+	%! \whiledo{\NOT \(\value{DYNTREE@ct}>\value{DYNTREE@numlevel}\)}%
+	%!	{%
+	%!	\setcounter{act}{1}%
+	%!	\def\DYNTREE@tempboxnum{\csname DYNTREE@level@\roman{DYNTREE@ct}@numbox\endcsname}%
+	%!	\whiledo{\NOT \(\value{act}>\DYNTREE@tempboxnum\)}%
+	%!		{%
+	%!		level: \arabic{DYNTREE@ct}, box: \arabic{act};
+	%!		\expandafter\copy\csname DYNTREE@box@\roman{DYNTREE@ct}@\roman{act}\endcsname
+	%!		
+	%!		\addtocounter{act}{1}%
+	%!		}%
+	%!	\addtocounter{DYNTREE@ct}{1}%
+	%!	}%
+	%!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Error Check END
+% \fi
+%    \begin{macrocode}
+	}%
+% Else
+	{%
+	\PackageError{dyntree}{Invalid start(#1)/finish(#4) call}%
+	}%
+}%
+%    \end{macrocode}
+%
+%
+% \Finale
+\endinput
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/dyntree/dyntree.ins b/Master/texmf-dist/source/latex/dyntree/dyntree.ins
new file mode 100644
index 00000000000..14835853a3b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/dyntree/dyntree.ins
@@ -0,0 +1,40 @@
+%%

+%% Copyright (C) 2006 by nsetzer

+%%

+%% This file may be distributed and/or modified under the

+%% conditions of the GNU Lesser General Product License

+%%

+

+\input docstrip.tex

+

+\keepsilent

+

+\usedir{tex/latex/dyntree}

+

+\preamble

+

+This is a generated file

+

+This file may be distributed and/or modified under the

+conditions of the GNU Lesser General Product License

+

+\endpreamble

+

+

+\generate{\file{dyntree.sty}{\from{dyntree.dtx}{package}}}

+

+\obeyspaces

+\Msg{****************************************************}

+\Msg{*                                                  *}

+\Msg{* To finish the installation you have to move the  *}

+\Msg{* following file into a directory searched by TeX: *}

+\Msg{*                                                  *}

+\Msg{* dyntree.sty                                      *}

+\Msg{*                                                  *}

+\Msg{* To produce the documentation run the file        *}

+\Msg{* dyntree.dtx through LaTeX.                       *}

+\Msg{*                                                  *}

+\Msg{*                                                  *}

+\Msg{****************************************************}

+

+\endbatchfile
\ No newline at end of file