new package oldlatin (19apr10)

git-svn-id: svn://tug.org/texlive/trunk@17932 c570f23f-e606-0410-a88d-b1316a301751

49 files changed, 5459 insertions, 0 deletions

diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olb10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olb10.mf
new file mode 100644
index 00000000000..42a7f102eae
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olb10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olb10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Roman 10 point
+% based on Computer Modern Bold Roman 10 point
+% (cmb10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLB"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=10/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=6/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=247/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=85/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=17/36pt#;    % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=46/36pt#;    % lowercase curve breadth
+ess#:=38/36pt#;      % breadth in middle of lowercase s
+flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=56/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=51/36pt#;    % uppercase stem breadth
+cap_curve#:=55/36pt#;    % uppercase curve breadth
+cap_ess#:=53/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=10/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=34/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=13/36pt#;    % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=17/36pt#;      % lowercase bar thickness
+slab#:=17/36pt#;    % serif and arm thickness
+cap_bar#:=17/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=2/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.5;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx10.mf
new file mode 100644
index 00000000000..f360203bb2a
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 10 point
+% based on Computer Modern Bold Extended Roman 10 point
+% (cmbx10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 10pt#;
+
+u#:=23/36pt#;      % unit width
+width_adj#:=11/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=7/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=247/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=85/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=17/36pt#;    % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=46/36pt#;    % lowercase curve breadth
+ess#:=38/36pt#;      % breadth in middle of lowercase s
+flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=56/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=51/36pt#;    % uppercase stem breadth
+cap_curve#:=55/36pt#;    % uppercase curve breadth
+cap_ess#:=53/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=10/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=39/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=13/36pt#;    % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=17/36pt#;      % lowercase bar thickness
+slab#:=17/36pt#;    % serif and arm thickness
+cap_bar#:=17/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=2/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.5;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx12.mf
new file mode 100644
index 00000000000..96ba837c167
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 12 point
+% based on Computer Modern Bold Extended Roman 12 point
+% (cmbx12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 12pt#;
+
+u#:=27/36pt#;      % unit width
+width_adj#:=13/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=324/36pt#;  % height of tallest characters
+asc_height#:=300/36pt#;    % height of lowercase ascenders
+cap_height#:=296.4/36pt#;  % height of caps
+fig_height#:=278.4/36pt#;  % height of numerals
+x_height#:=192/36pt#;    % height of lowercase without ascenders
+math_axis#:=108/36pt#;    % axis of symmetry for math symbols
+bar_height#:=102/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=84/36pt#;    % depth of comma below baseline
+desc_depth#:=84/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10.5/36pt#;    % width of extrafine details
+hair#:=18.3/36pt#;    % lowercase hairline breadth
+stem#:=47/36pt#;    % lowercase stem breadth
+curve#:=52/36pt#;    % lowercase curve breadth
+ess#:=44/36pt#;      % breadth in middle of lowercase s
+flare#:=51/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=62/36pt#;    % diameter of dots
+cap_hair#:=20/36pt#;    % uppercase hairline breadth
+cap_stem#:=57/36pt#;    % uppercase stem breadth
+cap_curve#:=61/36pt#;    % uppercase curve breadth
+cap_ess#:=59/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.66pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=12/36pt#;    % vertical distance from serif base to tangent
+jut#:=30/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=46/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=12.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=84/36pt#;    % vertical protrusion of beak serifs
+vair#:=14.3/36pt#;    % vertical diameter of hairlines
+notch_cut#:=12pt#;    % maximum breadth above or below notches
+bar#:=18.5/36pt#;    % lowercase bar thickness
+slab#:=18.5/36pt#;    % serif and arm thickness
+cap_bar#:=18.5/36pt#;    % uppercase bar thickness
+cap_band#:=18.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=12pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3.6/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=2/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=5/36pt#;      % amount of overshoot for curves
+apex_o#:=4/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.4;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx5.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx5.mf
new file mode 100644
index 00000000000..93ca70724d8
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx5.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx5.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 5 point
+% based on Computer Modern Bold Extended Roman 5 point
+% (cmbx5.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 5pt#;
+
+u#:=14.5/36pt#;      % unit width
+width_adj#:=7/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=3/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=3/36pt#;    % extra space added to all sidebars
+
+body_height#:=135/36pt#;  % height of tallest characters
+asc_height#:=125/36pt#;    % height of lowercase ascenders
+cap_height#:=123.5/36pt#;  % height of caps
+fig_height#:=116/36pt#;    % height of numerals
+x_height#:=80/36pt#;    % height of lowercase without ascenders
+math_axis#:=45/36pt#;    % axis of symmetry for math symbols
+bar_height#:=40/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=35/36pt#;    % depth of comma below baseline
+desc_depth#:=35/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=9/36pt#;      % diameter of rounded corners
+fine#:=8/36pt#;      % diameter of sharply rounded corners
+thin_join#:=8/36pt#;    % width of extrafine details
+hair#:=15/36pt#;    % lowercase hairline breadth
+stem#:=24/36pt#;    % lowercase stem breadth
+curve#:=27/36pt#;    % lowercase curve breadth
+ess#:=19/36pt#;      % breadth in middle of lowercase s
+flare#:=27/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=31/36pt#;    % diameter of dots
+cap_hair#:=17/36pt#;    % uppercase hairline breadth
+cap_stem#:=28/36pt#;    % uppercase stem breadth
+cap_curve#:=31/36pt#;    % uppercase curve breadth
+cap_ess#:=24/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.43pt#;  % thickness of lines in math symbols
+
+dish#:=.7/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=5/36pt#;    % vertical distance from serif base to tangent
+jut#:=13/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=19/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=7/36pt#;    % horizontal protrusion of beak serifs
+beak#:=25/36pt#;    % vertical protrusion of beak serifs
+vair#:=10/36pt#;    % vertical diameter of hairlines
+notch_cut#:=5pt#;    % maximum breadth above or below notches
+bar#:=12/36pt#;      % lowercase bar thickness
+slab#:=12/36pt#;    % serif and arm thickness
+cap_bar#:=12/36pt#;    % uppercase bar thickness
+cap_band#:=12/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=5pt#;    % max breadth above/below uppercase notches
+serif_drop#:=1.5/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1.5/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=9/36pt#;    % extra width at diagonal junctions
+
+o#:=3/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=1.5;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx6.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx6.mf
new file mode 100644
index 00000000000..d60ac6c0c7a
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx6.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx6.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 6 point
+% based on Computer Modern Bold Extended Roman 6 point
+% (cmbx6.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 6pt#;
+
+u#:=16.2/36pt#;      % unit width
+width_adj#:=7.8/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=3.8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=2/36pt#;    % extra space added to all sidebars
+
+body_height#:=162/36pt#;  % height of tallest characters
+asc_height#:=150/36pt#;    % height of lowercase ascenders
+cap_height#:=148.2/36pt#;  % height of caps
+fig_height#:=139.2/36pt#;  % height of numerals
+x_height#:=96/36pt#;    % height of lowercase without ascenders
+math_axis#:=54/36pt#;    % axis of symmetry for math symbols
+bar_height#:=49/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=42/36pt#;    % depth of comma below baseline
+desc_depth#:=42/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=10/36pt#;    % diameter of rounded corners
+fine#:=9/36pt#;      % diameter of sharply rounded corners
+thin_join#:=9/36pt#;    % width of extrafine details
+hair#:=15.4/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=31/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=31/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=36/36pt#;    % diameter of dots
+cap_hair#:=18/36pt#;    % uppercase hairline breadth
+cap_stem#:=33/36pt#;    % uppercase stem breadth
+cap_curve#:=36/36pt#;    % uppercase curve breadth
+cap_ess#:=31/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.47pt#;  % thickness of lines in math symbols
+
+dish#:=.8/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=6/36pt#;    % vertical distance from serif base to tangent
+jut#:=15/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=23/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=7.8/36pt#;    % horizontal protrusion of beak serifs
+beak#:=36/36pt#;    % vertical protrusion of beak serifs
+vair#:=11/36pt#;    % vertical diameter of hairlines
+notch_cut#:=6pt#;    % maximum breadth above or below notches
+bar#:=13/36pt#;      % lowercase bar thickness
+slab#:=13/36pt#;    % serif and arm thickness
+cap_bar#:=13/36pt#;    % uppercase bar thickness
+cap_band#:=13/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=6pt#;    % max breadth above/below uppercase notches
+serif_drop#:=1.8/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1.6/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.1/36pt#;    % for small refinements of hairline height
+apex_corr#:=5/36pt#;    % extra width at diagonal junctions
+
+o#:=3/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=1.3;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx7.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx7.mf
new file mode 100644
index 00000000000..0d95acc9feb
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx7.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx7.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 7 point
+% based on Computer Modern Bold Extended Roman 7 point
+% (cmbx7.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 7pt#;
+
+u#:=17.9/36pt#;      % unit width
+width_adj#:=8.6/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=4.6/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=1/36pt#;    % extra space added to all sidebars
+
+body_height#:=189/36pt#;  % height of tallest characters
+asc_height#:=175/36pt#;    % height of lowercase ascenders
+cap_height#:=172.9/36pt#;  % height of caps
+fig_height#:=162.4/36pt#;  % height of numerals
+x_height#:=112/36pt#;    % height of lowercase without ascenders
+math_axis#:=63/36pt#;    % axis of symmetry for math symbols
+bar_height#:=58/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=49/36pt#;    % depth of comma below baseline
+desc_depth#:=49/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=11/36pt#;    % diameter of rounded corners
+fine#:=9/36pt#;      % diameter of sharply rounded corners
+thin_join#:=9/36pt#;    % width of extrafine details
+hair#:=15.8/36pt#;    % lowercase hairline breadth
+stem#:=32/36pt#;    % lowercase stem breadth
+curve#:=35/36pt#;    % lowercase curve breadth
+ess#:=29/36pt#;      % breadth in middle of lowercase s
+flare#:=35/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=41/36pt#;    % diameter of dots
+cap_hair#:=18/36pt#;    % uppercase hairline breadth
+cap_stem#:=38/36pt#;    % uppercase stem breadth
+cap_curve#:=41/36pt#;    % uppercase curve breadth
+cap_ess#:=37/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.51pt#;  % thickness of lines in math symbols
+
+dish#:=.9/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=7/36pt#;    % vertical distance from serif base to tangent
+jut#:=17/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=27/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=8.6/36pt#;    % horizontal protrusion of beak serifs
+beak#:=46/36pt#;    % vertical protrusion of beak serifs
+vair#:=11.5/36pt#;    % vertical diameter of hairlines
+notch_cut#:=7pt#;    % maximum breadth above or below notches
+bar#:=14/36pt#;      % lowercase bar thickness
+slab#:=14/36pt#;    % serif and arm thickness
+cap_bar#:=14/36pt#;    % uppercase bar thickness
+cap_band#:=14/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=7pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2.1/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1.7/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.2/36pt#;    % for small refinements of hairline height
+apex_corr#:=2/36pt#;    % extra width at diagonal junctions
+
+o#:=3/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=1.1;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx8.mf
new file mode 100644
index 00000000000..611ba9ffded
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 8 point
+% based on Computer Modern Bold Extended Roman 8 point
+% (cmbx8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMBX"; font_size 8pt#;
+
+u#:=19.6/36pt#;      % unit width
+width_adj#:=9.4/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5.4/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=216/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=197.6/36pt#;  % height of caps
+fig_height#:=185.6/36pt#;  % height of numerals
+x_height#:=128/36pt#;    % height of lowercase without ascenders
+math_axis#:=72/36pt#;    % axis of symmetry for math symbols
+bar_height#:=67/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=56/36pt#;    % depth of comma below baseline
+desc_depth#:=56/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=12/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=16.2/36pt#;    % lowercase hairline breadth
+stem#:=35/36pt#;    % lowercase stem breadth
+curve#:=39/36pt#;    % lowercase curve breadth
+ess#:=32/36pt#;      % breadth in middle of lowercase s
+flare#:=39/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=46/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=43/36pt#;    % uppercase stem breadth
+cap_curve#:=46/36pt#;    % uppercase curve breadth
+cap_ess#:=43/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.54pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=8/36pt#;    % vertical distance from serif base to tangent
+jut#:=19/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=9.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=55/36pt#;    % vertical protrusion of beak serifs
+vair#:=12/36pt#;    % vertical diameter of hairlines
+notch_cut#:=8pt#;    % maximum breadth above or below notches
+bar#:=15/36pt#;      % lowercase bar thickness
+slab#:=15/36pt#;    % serif and arm thickness
+cap_bar#:=15/36pt#;    % uppercase bar thickness
+cap_band#:=15/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=8pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2.4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1.8/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.3/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.9;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbx9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbx9.mf
new file mode 100644
index 00000000000..66daef8b0e1
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbx9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbx9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Roman 9 point
+% based on Computer Modern Bold Extended Roman 9 point
+% (cmbx9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBX"; font_size 9pt#;
+
+u#:=21.3/36pt#;      % unit width
+width_adj#:=10.2/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=6.2/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=243/36pt#;  % height of tallest characters
+asc_height#:=225/36pt#;    % height of lowercase ascenders
+cap_height#:=222.3/36pt#;  % height of caps
+fig_height#:=208.8/36pt#;  % height of numerals
+x_height#:=144/36pt#;    % height of lowercase without ascenders
+math_axis#:=81/36pt#;    % axis of symmetry for math symbols
+bar_height#:=76/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=63/36pt#;    % depth of comma below baseline
+desc_depth#:=63/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=16.6/36pt#;    % lowercase hairline breadth
+stem#:=38/36pt#;    % lowercase stem breadth
+curve#:=43/36pt#;    % lowercase curve breadth
+ess#:=35/36pt#;      % breadth in middle of lowercase s
+flare#:=42/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=51/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=47/36pt#;    % uppercase stem breadth
+cap_curve#:=51/36pt#;    % uppercase curve breadth
+cap_ess#:=48/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.57pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=9/36pt#;    % vertical distance from serif base to tangent
+jut#:=22/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=35/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10.2/36pt#;    % horizontal protrusion of beak serifs
+beak#:=63/36pt#;    % vertical protrusion of beak serifs
+vair#:=12.5/36pt#;    % vertical diameter of hairlines
+notch_cut#:=9pt#;    % maximum breadth above or below notches
+bar#:=16/36pt#;      % lowercase bar thickness
+slab#:=16/36pt#;    % serif and arm thickness
+cap_bar#:=16/36pt#;    % uppercase bar thickness
+cap_band#:=16/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=9pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2.7/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1.9/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.4/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.7;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olbxsl10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olbxsl10.mf
new file mode 100644
index 00000000000..89d2fd2a209
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olbxsl10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olbxsl10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Bold Extended Slanted Roman 10 point
+% based on Computer Modern Bold Extended Slanted Roman 10 point
+% (cmbxsl10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLBXSL"; font_size 10pt#;
+
+u#:=23/36pt#;      % unit width
+width_adj#:=11/36pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=7/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=247/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=85/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;    % diameter of rounded corners
+fine#:=10/36pt#;    % diameter of sharply rounded corners
+thin_join#:=10/36pt#;    % width of extrafine details
+hair#:=17/36pt#;    % lowercase hairline breadth
+stem#:=41/36pt#;    % lowercase stem breadth
+curve#:=46/36pt#;    % lowercase curve breadth
+ess#:=38/36pt#;      % breadth in middle of lowercase s
+flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=56/36pt#;    % diameter of dots
+cap_hair#:=19/36pt#;    % uppercase hairline breadth
+cap_stem#:=51/36pt#;    % uppercase stem breadth
+cap_curve#:=55/36pt#;    % uppercase curve breadth
+cap_ess#:=53/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=10/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=39/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=13/36pt#;    % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=17/36pt#;      % lowercase bar thickness
+slab#:=17/36pt#;    % serif and arm thickness
+cap_bar#:=17/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=2/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.5;    % extra openness of math symbols
+superness:=8/11;    % parameter for superellipses
+superpull:=1/8;      % extra openness inside bowls
+beak_darkness:=.4;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oldunh10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oldunh10.mf
new file mode 100644
index 00000000000..fe8b94799fd
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oldunh10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE oldunh10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Dunhil Roman 10 point
+% based on Computer Modern Dunhill Roman 10 point
+% (cmdunh10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLDUNH"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=370/36pt#;  % height of tallest characters
+asc_height#:=350/36pt#;    % height of lowercase ascenders
+cap_height#:=346/36pt#;    % height of caps
+fig_height#:=332/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=30/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=11/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=11/36pt#;      % lowercase bar thickness
+slab#:=11/36pt#;    % serif and arm thickness
+cap_bar#:=11/36pt#;    % uppercase bar thickness
+cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olff10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olff10.mf
new file mode 100644
index 00000000000..654f526ad23
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olff10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olff10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Funny Roman 10 point
+% based on Computer Modern Funny Roman 10 point
+% (cmff10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLFF"; font_size 10pt#;
+
+u#:=16/36pt#;      % unit width
+width_adj#:=-16/36pt#;    % width adjustment for certain characters
+serif_fit#:=-3/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-4/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=2/36pt#;    % extra space added to all sidebars
+
+body_height#:=240/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=225/36pt#;    % height of caps
+fig_height#:=210/36pt#;    % height of numerals
+x_height#:=190/36pt#;    % height of lowercase without ascenders
+math_axis#:=55/36pt#;    % axis of symmetry for math symbols
+bar_height#:=60/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=100/36pt#;    % depth of lowercase descenders
+
+crisp#:=10/36pt#;    % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=14/36pt#;    % width of extrafine details
+hair#:=12/36pt#;    % lowercase hairline breadth
+stem#:=16/36pt#;    % lowercase stem breadth
+curve#:=20/36pt#;    % lowercase curve breadth
+ess#:=22/36pt#;      % breadth in middle of lowercase s
+flare#:=24/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=26/36pt#;    % diameter of dots
+cap_hair#:=16/36pt#;    % uppercase hairline breadth
+cap_stem#:=24/36pt#;    % uppercase stem breadth
+cap_curve#:=26/36pt#;    % uppercase curve breadth
+cap_ess#:=28/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.5pt#;    % thickness of lines in math symbols
+
+dish#:=5/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=3/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=4/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=-8/36pt#;    % horizontal protrusion of beak serifs
+beak#:=10/36pt#;    % vertical protrusion of beak serifs
+vair#:=14/36pt#;    % vertical diameter of hairlines
+notch_cut#:=2/36pt#;    % maximum breadth above or below notches
+bar#:=17/36pt#;      % lowercase bar thickness
+slab#:=20/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=3/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=-10/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=-1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=-1/36pt#;    % for small refinements of hairline height
+apex_corr#:=6/36pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=9/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=-.1;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.5;    % extra openness of math symbols
+superness:=2/3;      % parameter for superellipses
+superpull:=-1/8;    % extra openness inside bowls
+beak_darkness:=.5;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olfib8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olfib8.mf
new file mode 100644
index 00000000000..78ae589166f
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olfib8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olfib8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman Fibonacci Font
+% based on Computer Modern Roman Fibonacci Font
+% (cmfib8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLFIB"; font_size 8pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=-2/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=233/36pt#;  % height of tallest characters
+asc_height#:=233/36pt#;    % height of lowercase ascenders
+cap_height#:=233/36pt#;    % height of caps
+fig_height#:=233/36pt#;    % height of numerals
+x_height#:=144/36pt#;    % height of lowercase without ascenders
+math_axis#:=89/36pt#;    % axis of symmetry for math symbols
+bar_height#:=89/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=55/36pt#;    % depth of comma below baseline
+desc_depth#:=55/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=13/36pt#;      % diameter of rounded corners
+fine#:=13/36pt#;      % diameter of sharply rounded corners
+thin_join#:=13/36pt#;    % width of extrafine details
+hair#:=21/36pt#;      % lowercase hairline breadth
+stem#:=34/36pt#;    % lowercase stem breadth
+curve#:=39/36pt#;    % lowercase curve breadth
+ess#:=34/36pt#;      % breadth in middle of lowercase s
+flare#:=34/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=34/36pt#;    % diameter of dots
+cap_hair#:=21/36pt#;    % uppercase hairline breadth
+cap_stem#:=34/36pt#;    % uppercase stem breadth
+cap_curve#:=39/36pt#;    % uppercase curve breadth
+cap_ess#:=34/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=21/36pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=21/36pt#;    % vertical distance from serif base to tangent
+jut#:=21/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=21/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=13/36pt#;    % horizontal protrusion of beak serifs
+beak#:=55/36pt#;    % vertical protrusion of beak serifs
+vair#:=13/36pt#;      % vertical diameter of hairlines
+notch_cut#:=8pt#;    % maximum breadth above or below notches
+bar#:=13/36pt#;      % lowercase bar thickness
+slab#:=13/36pt#;    % serif and arm thickness
+cap_bar#:=13/36pt#;    % uppercase bar thickness
+cap_band#:=13/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=8pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=3/8;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/13;    % extra openness inside bowls
+beak_darkness:=5/13;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr10.mf
new file mode 100644
index 00000000000..c4273c1738b
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 10 point
+% based on Computer Modern Roman 10 point
+% (cmr10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=30/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=11/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=11/36pt#;      % lowercase bar thickness
+slab#:=11/36pt#;    % serif and arm thickness
+cap_bar#:=11/36pt#;    % uppercase bar thickness
+cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr10s.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr10s.mf
new file mode 100644
index 00000000000..f8c2a8e9e7f
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr10s.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr10s.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 10 point for Speersatz
+% based on Computer Modern Roman 10 point
+% (cmr10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=1pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=30/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=11/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=11/36pt#;      % lowercase bar thickness
+slab#:=11/36pt#;    % serif and arm thickness
+cap_bar#:=11/36pt#;    % uppercase bar thickness
+cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr12.mf
new file mode 100644
index 00000000000..5d7f7237bed
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 12 point
+% based on Computer Modern Roman 12 point
+% (cmr12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 12pt#;
+
+u#:=23.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5.8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=324/36pt#;  % height of tallest characters
+asc_height#:=300/36pt#;    % height of lowercase ascenders
+cap_height#:=295.2/36pt#;  % height of caps
+fig_height#:=278.4/36pt#;  % height of numerals
+x_height#:=186/36pt#;    % height of lowercase without ascenders
+math_axis#:=108/36pt#;    % axis of symmetry for math symbols
+bar_height#:=104.4/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=84/36pt#;    % depth of comma below baseline
+desc_depth#:=84/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7.5/36pt#;    % width of extrafine details
+hair#:=9.5/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=33/36pt#;    % lowercase curve breadth
+ess#:=30/36pt#;      % breadth in middle of lowercase s
+flare#:=36/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=42/36pt#;    % diameter of dots
+cap_hair#:=11.5/36pt#;    % uppercase hairline breadth
+cap_stem#:=35/36pt#;    % uppercase stem breadth
+cap_curve#:=40/36pt#;    % uppercase curve breadth
+cap_ess#:=38/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.44pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=24/36pt#;    % vertical distance from serif base to tangent
+jut#:=33/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=41/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=84/36pt#;    % vertical protrusion of beak serifs
+vair#:=8.5/36pt#;    % vertical diameter of hairlines
+notch_cut#:=12pt#;    % maximum breadth above or below notches
+bar#:=12.5/36pt#;    % lowercase bar thickness
+slab#:=12.5/36pt#;    % serif and arm thickness
+cap_bar#:=12.5/36pt#;    % uppercase bar thickness
+cap_band#:=12.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=12pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4.8/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=9/36pt#;      % amount of overshoot for curves
+apex_o#:=9/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=-0.2;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr17.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr17.mf
new file mode 100644
index 00000000000..f9ed5f4d05c
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr17.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr17.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 17 point (more or less)
+% based on Computer Modern Roman 17 point
+% (cmr17.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 17.28pt#;
+
+u#:=32.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=-0.1pt#;    % extra space added to all sidebars
+
+body_height#:=466/36pt#;  % height of tallest characters
+asc_height#:=432/36pt#;    % height of lowercase ascenders
+cap_height#:=425/36pt#;    % height of caps
+fig_height#:=401/36pt#;    % height of numerals
+x_height#:=267.8/36pt#;    % height of lowercase without ascenders
+math_axis#:=155.5/36pt#;  % axis of symmetry for math symbols
+bar_height#:=150/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=121/36pt#;  % depth of comma below baseline
+desc_depth#:=121/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=9/36pt#;    % width of extrafine details
+hair#:=11/36pt#;    % lowercase hairline breadth
+stem#:=33/36pt#;    % lowercase stem breadth
+curve#:=40/36pt#;    % lowercase curve breadth
+ess#:=35/36pt#;      % breadth in middle of lowercase s
+flare#:=45/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=51/36pt#;    % diameter of dots
+cap_hair#:=13/36pt#;    % uppercase hairline breadth
+cap_stem#:=41/36pt#;    % uppercase stem breadth
+cap_curve#:=47/36pt#;    % uppercase curve breadth
+cap_ess#:=43/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=34/36pt#;    % vertical distance from serif base to tangent
+jut#:=42/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=50/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=15/36pt#;    % horizontal protrusion of beak serifs
+beak#:=121/36pt#;    % vertical protrusion of beak serifs
+vair#:=10/36pt#;    % vertical diameter of hairlines
+notch_cut#:=17pt#;    % maximum breadth above or below notches
+bar#:=16/36pt#;      % lowercase bar thickness
+slab#:=16/36pt#;    % serif and arm thickness
+cap_bar#:=16/36pt#;    % uppercase bar thickness
+cap_band#:=16/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=17pt#;    % max breadth above/below uppercase notches
+serif_drop#:=7/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=10/36pt#;      % amount of overshoot for curves
+apex_o#:=10/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=-0.4;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr5.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr5.mf
new file mode 100644
index 00000000000..a9698354ed0
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr5.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr5.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 5 point
+% based on Computer Modern Roman 5 point
+% (cmr5.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 5pt#;
+
+u#:=12.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=2/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=5/36pt#;    % extra space added to all sidebars
+
+body_height#:=135/36pt#;  % height of tallest characters
+asc_height#:=125/36pt#;    % height of lowercase ascenders
+cap_height#:=123/36pt#;    % height of caps
+fig_height#:=116/36pt#;    % height of numerals
+x_height#:=77.5/36pt#;    % height of lowercase without ascenders
+math_axis#:=45/36pt#;    % axis of symmetry for math symbols
+bar_height#:=43.5/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=35/36pt#;    % depth of comma below baseline
+desc_depth#:=35/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=6/36pt#;      % diameter of rounded corners
+fine#:=5/36pt#;      % diameter of sharply rounded corners
+thin_join#:=5/36pt#;    % width of extrafine details
+hair#:=7.5/36pt#;    % lowercase hairline breadth
+stem#:=16/36pt#;    % lowercase stem breadth
+curve#:=18/36pt#;    % lowercase curve breadth
+ess#:=12/36pt#;      % breadth in middle of lowercase s
+flare#:=19/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=22/36pt#;    % diameter of dots
+cap_hair#:=8/36pt#;    % uppercase hairline breadth
+cap_stem#:=19/36pt#;    % uppercase stem breadth
+cap_curve#:=21/36pt#;    % uppercase curve breadth
+cap_ess#:=14/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.28pt#;  % thickness of lines in math symbols
+
+dish#:=.7/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=10/36pt#;    % vertical distance from serif base to tangent
+jut#:=15/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=20/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=6/36pt#;    % horizontal protrusion of beak serifs
+beak#:=35/36pt#;    % vertical protrusion of beak serifs
+vair#:=6/36pt#;      % vertical diameter of hairlines
+notch_cut#:=5pt#;    % maximum breadth above or below notches
+bar#:=8/36pt#;      % lowercase bar thickness
+slab#:=8/36pt#;      % serif and arm thickness
+cap_bar#:=8/36pt#;    % uppercase bar thickness
+cap_band#:=8/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=5pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=.7/36pt#;    % for small refinements of stem breadth
+vair_corr#:=.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=4/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=1;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=1;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr6.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr6.mf
new file mode 100644
index 00000000000..72269647a13
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr6.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr6.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 6 point
+% based on Computer Modern Roman 6 point
+% (cmr6.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 6pt#;
+
+u#:=14/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=2.8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=3/36pt#;    % extra space added to all sidebars
+
+body_height#:=162/36pt#;  % height of tallest characters
+asc_height#:=150/36pt#;    % height of lowercase ascenders
+cap_height#:=147.6/36pt#;  % height of caps
+fig_height#:=139.2/36pt#;  % height of numerals
+x_height#:=93/36pt#;    % height of lowercase without ascenders
+math_axis#:=54/36pt#;    % axis of symmetry for math symbols
+bar_height#:=52.2/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=42/36pt#;    % depth of comma below baseline
+desc_depth#:=42/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=7/36pt#;      % diameter of rounded corners
+fine#:=6/36pt#;      % diameter of sharply rounded corners
+thin_join#:=6/36pt#;    % width of extrafine details
+hair#:=8/36pt#;      % lowercase hairline breadth
+stem#:=18/36pt#;    % lowercase stem breadth
+curve#:=20.5/36pt#;    % lowercase curve breadth
+ess#:=17/36pt#;      % breadth in middle of lowercase s
+flare#:=21/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=26/36pt#;    % diameter of dots
+cap_hair#:=8.5/36pt#;    % uppercase hairline breadth
+cap_stem#:=21.5/36pt#;    % uppercase stem breadth
+cap_curve#:=24/36pt#;    % uppercase curve breadth
+cap_ess#:=19/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.31pt#;  % thickness of lines in math symbols
+
+dish#:=.8/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=12/36pt#;    % vertical distance from serif base to tangent
+jut#:=17/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=23/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=6.8/36pt#;    % horizontal protrusion of beak serifs
+beak#:=42/36pt#;    % vertical protrusion of beak serifs
+vair#:=7/36pt#;      % vertical diameter of hairlines
+notch_cut#:=6pt#;    % maximum breadth above or below notches
+bar#:=8.5/36pt#;    % lowercase bar thickness
+slab#:=8.5/36pt#;    % serif and arm thickness
+cap_bar#:=8.5/36pt#;    % uppercase bar thickness
+cap_band#:=8.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=6pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2.4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=.8/36pt#;    % for small refinements of stem breadth
+vair_corr#:=.7/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=4.5/36pt#;      % amount of overshoot for curves
+apex_o#:=4.5/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.8;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr7.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr7.mf
new file mode 100644
index 00000000000..63c24172382
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr7.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr7.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 7 point
+% based on Computer Modern Roman 7 point
+% (cmr7.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 7pt#;
+
+u#:=15.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=3.5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=2/36pt#;    % extra space added to all sidebars
+
+body_height#:=189/36pt#;  % height of tallest characters
+asc_height#:=175/36pt#;    % height of lowercase ascenders
+cap_height#:=172.2/36pt#;  % height of caps
+fig_height#:=162.4/36pt#;  % height of numerals
+x_height#:=108.5/36pt#;    % height of lowercase without ascenders
+math_axis#:=63/36pt#;    % axis of symmetry for math symbols
+bar_height#:=60.9/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=49/36pt#;    % depth of comma below baseline
+desc_depth#:=49/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=7/36pt#;      % diameter of rounded corners
+fine#:=6/36pt#;      % diameter of sharply rounded corners
+thin_join#:=6/36pt#;    % width of extrafine details
+hair#:=8.5/36pt#;    % lowercase hairline breadth
+stem#:=20/36pt#;    % lowercase stem breadth
+curve#:=23/36pt#;    % lowercase curve breadth
+ess#:=21/36pt#;      % breadth in middle of lowercase s
+flare#:=24/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=29/36pt#;    % diameter of dots
+cap_hair#:=9/36pt#;    % uppercase hairline breadth
+cap_stem#:=24/36pt#;    % uppercase stem breadth
+cap_curve#:=27/36pt#;    % uppercase curve breadth
+cap_ess#:=23/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.34pt#;  % thickness of lines in math symbols
+
+dish#:=.9/36pt#;    % amount erased at top or bottom of serifs
+bracket#:=14/36pt#;    % vertical distance from serif base to tangent
+jut#:=19/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=26/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=7.6/36pt#;    % horizontal protrusion of beak serifs
+beak#:=49/36pt#;    % vertical protrusion of beak serifs
+vair#:=7/36pt#;      % vertical diameter of hairlines
+notch_cut#:=7pt#;    % maximum breadth above or below notches
+bar#:=9/36pt#;      % lowercase bar thickness
+slab#:=9/36pt#;      % serif and arm thickness
+cap_bar#:=9/36pt#;    % uppercase bar thickness
+cap_band#:=9/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=7pt#;    % max breadth above/below uppercase notches
+serif_drop#:=2.8/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=.9/36pt#;    % for small refinements of stem breadth
+vair_corr#:=.9/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=5/36pt#;      % amount of overshoot for curves
+apex_o#:=5/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.6;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr8.mf
new file mode 100644
index 00000000000..7e823a7dc82
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 8 point
+% based on Computer Modern Roman 8 point
+% (cmr8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=4.1/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=216/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=196.8/36pt#;  % height of caps
+fig_height#:=185.6/36pt#;  % height of numerals
+x_height#:=124/36pt#;    % height of lowercase without ascenders
+math_axis#:=72/36pt#;    % axis of symmetry for math symbols
+bar_height#:=69.6/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=56/36pt#;    % depth of comma below baseline
+desc_depth#:=56/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=22/36pt#;    % lowercase stem breadth
+curve#:=25.5/36pt#;    % lowercase curve breadth
+ess#:=23/36pt#;      % breadth in middle of lowercase s
+flare#:=27/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=32/36pt#;    % diameter of dots
+cap_hair#:=9.5/36pt#;    % uppercase hairline breadth
+cap_stem#:=26.5/36pt#;    % uppercase stem breadth
+cap_curve#:=30/36pt#;    % uppercase curve breadth
+cap_ess#:=27/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.36pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=16/36pt#;    % vertical distance from serif base to tangent
+jut#:=22/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=29/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=8.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=56/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=8pt#;    % maximum breadth above or below notches
+bar#:=9.5/36pt#;    % lowercase bar thickness
+slab#:=9.5/36pt#;    % serif and arm thickness
+cap_bar#:=9.5/36pt#;    % uppercase bar thickness
+cap_band#:=9.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=8pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3.2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=6/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.4;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olr9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olr9.mf
new file mode 100644
index 00000000000..52d27a3e7f5
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olr9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olr9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman 9 point
+% based on Computer Modern Roman 9 point
+% (cmr9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLR"; font_size 9pt#;
+
+u#:=18.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=4.6/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=243/36pt#;  % height of tallest characters
+asc_height#:=225/36pt#;    % height of lowercase ascenders
+cap_height#:=221.4/36pt#;  % height of caps
+fig_height#:=208.8/36pt#;  % height of numerals
+x_height#:=139.5/36pt#;    % height of lowercase without ascenders
+math_axis#:=81/36pt#;    % axis of symmetry for math symbols
+bar_height#:=78.3/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=63/36pt#;    % depth of comma below baseline
+desc_depth#:=63/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=24/36pt#;    % lowercase stem breadth
+curve#:=28/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=30/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=35/36pt#;    % diameter of dots
+cap_hair#:=10/36pt#;    % uppercase hairline breadth
+cap_stem#:=29/36pt#;    % uppercase stem breadth
+cap_curve#:=33/36pt#;    % uppercase curve breadth
+cap_ess#:=31/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.38pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=18/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=33/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=9.2/36pt#;    % horizontal protrusion of beak serifs
+beak#:=63/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=9pt#;    % maximum breadth above or below notches
+bar#:=10/36pt#;      % lowercase bar thickness
+slab#:=10/36pt#;    % serif and arm thickness
+cap_bar#:=10/36pt#;    % uppercase bar thickness
+cap_band#:=10/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=9pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3.6/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=7/36pt#;      % amount of overshoot for curves
+apex_o#:=7/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.2;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olsl10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olsl10.mf
new file mode 100644
index 00000000000..18e32132c68
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olsl10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olsl10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Roman 10 point
+% based on Computer Modern Slanted Roman 10 point
+% (cmsl10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSL"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=30/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=11/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=11/36pt#;      % lowercase bar thickness
+slab#:=11/36pt#;    % serif and arm thickness
+cap_bar#:=11/36pt#;    % uppercase bar thickness
+cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olsl12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olsl12.mf
new file mode 100644
index 00000000000..ff57efaf2ce
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olsl12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olsl12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Roman 12 point
+% based on Computer Modern Slanted Roman 12 point
+% (cmsl12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSL"; font_size 12pt#;
+
+u#:=23.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5.8/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=324/36pt#;  % height of tallest characters
+asc_height#:=300/36pt#;    % height of lowercase ascenders
+cap_height#:=295.2/36pt#;  % height of caps
+fig_height#:=278.4/36pt#;  % height of numerals
+x_height#:=186/36pt#;    % height of lowercase without ascenders
+math_axis#:=108/36pt#;    % axis of symmetry for math symbols
+bar_height#:=104.4/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=84/36pt#;    % depth of comma below baseline
+desc_depth#:=84/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7.5/36pt#;    % width of extrafine details
+hair#:=9.5/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=33/36pt#;    % lowercase curve breadth
+ess#:=30/36pt#;      % breadth in middle of lowercase s
+flare#:=36/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=42/36pt#;    % diameter of dots
+cap_hair#:=11.5/36pt#;    % uppercase hairline breadth
+cap_stem#:=35/36pt#;    % uppercase stem breadth
+cap_curve#:=40/36pt#;    % uppercase curve breadth
+cap_ess#:=38/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.44pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=24/36pt#;    % vertical distance from serif base to tangent
+jut#:=33/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=41/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=11.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=84/36pt#;    % vertical protrusion of beak serifs
+vair#:=8.5/36pt#;    % vertical diameter of hairlines
+notch_cut#:=12pt#;    % maximum breadth above or below notches
+bar#:=12.5/36pt#;    % lowercase bar thickness
+slab#:=12.5/36pt#;    % serif and arm thickness
+cap_bar#:=12.5/36pt#;    % uppercase bar thickness
+cap_band#:=12.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=12pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4.8/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=9/36pt#;      % amount of overshoot for curves
+apex_o#:=9/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=-0.2;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olsl8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olsl8.mf
new file mode 100644
index 00000000000..2eaf377a87b
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olsl8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olsl8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Roman 8 point
+% based on Computer Modern Slanted Roman 8 point
+% (cmsl8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSL"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=4.1/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=216/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=196.8/36pt#;  % height of caps
+fig_height#:=185.6/36pt#;  % height of numerals
+x_height#:=124/36pt#;    % height of lowercase without ascenders
+math_axis#:=72/36pt#;    % axis of symmetry for math symbols
+bar_height#:=69.6/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=56/36pt#;    % depth of comma below baseline
+desc_depth#:=56/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=22/36pt#;    % lowercase stem breadth
+curve#:=25.5/36pt#;    % lowercase curve breadth
+ess#:=23/36pt#;      % breadth in middle of lowercase s
+flare#:=27/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=32/36pt#;    % diameter of dots
+cap_hair#:=9.5/36pt#;    % uppercase hairline breadth
+cap_stem#:=26.5/36pt#;    % uppercase stem breadth
+cap_curve#:=30/36pt#;    % uppercase curve breadth
+cap_ess#:=27/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.36pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=16/36pt#;    % vertical distance from serif base to tangent
+jut#:=22/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=29/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=8.4/36pt#;    % horizontal protrusion of beak serifs
+beak#:=56/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=8pt#;    % maximum breadth above or below notches
+bar#:=9.5/36pt#;    % lowercase bar thickness
+slab#:=9.5/36pt#;    % serif and arm thickness
+cap_bar#:=9.5/36pt#;    % uppercase bar thickness
+cap_band#:=9.5/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=8pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3.2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=6/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.4;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olsl9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olsl9.mf
new file mode 100644
index 00000000000..407ad3ff162
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olsl9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olsl9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Roman 9 point based on
+% Computer Modern Slanted Roman 9 point
+% (cmsl9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSL"; font_size 9pt#;
+
+u#:=18.5/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=4.6/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=243/36pt#;  % height of tallest characters
+asc_height#:=225/36pt#;    % height of lowercase ascenders
+cap_height#:=221.4/36pt#;  % height of caps
+fig_height#:=208.8/36pt#;  % height of numerals
+x_height#:=139.5/36pt#;    % height of lowercase without ascenders
+math_axis#:=81/36pt#;    % axis of symmetry for math symbols
+bar_height#:=78.3/36pt#;  % height of crossbar in lowercase e
+comma_depth#:=63/36pt#;    % depth of comma below baseline
+desc_depth#:=63/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=24/36pt#;    % lowercase stem breadth
+curve#:=28/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=30/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=35/36pt#;    % diameter of dots
+cap_hair#:=10/36pt#;    % uppercase hairline breadth
+cap_stem#:=29/36pt#;    % uppercase stem breadth
+cap_curve#:=33/36pt#;    % uppercase curve breadth
+cap_ess#:=31/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.38pt#;  % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=18/36pt#;    % vertical distance from serif base to tangent
+jut#:=25/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=33/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=9.2/36pt#;    % horizontal protrusion of beak serifs
+beak#:=63/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=9pt#;    % maximum breadth above or below notches
+bar#:=10/36pt#;      % lowercase bar thickness
+slab#:=10/36pt#;    % serif and arm thickness
+cap_bar#:=10/36pt#;    % uppercase bar thickness
+cap_band#:=10/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=9pt#;    % max breadth above/below uppercase notches
+serif_drop#:=3.6/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=7/36pt#;      % amount of overshoot for curves
+apex_o#:=7/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=.2;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olsltt10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olsltt10.mf
new file mode 100644
index 00000000000..70693e84542
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olsltt10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olsltt10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Typewriter Text for use with 10 point
+% based on Computer Modern Slanted Typewriter Text for use with 10 point
+% (cmsltt10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSLTT"; font_size 10pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=79/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=22/36pt#;    % diameter of rounded corners
+fine#:=21/36pt#;    % diameter of sharply rounded corners
+thin_join#:=21/36pt#;    % width of extrafine details
+hair#:=25/36pt#;    % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=25/36pt#;    % lowercase curve breadth
+ess#:=22/36pt#;      % breadth in middle of lowercase s
+flare#:=32/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=36/36pt#;    % diameter of dots
+cap_hair#:=25/36pt#;    % uppercase hairline breadth
+cap_stem#:=25/36pt#;    % uppercase stem breadth
+cap_curve#:=25/36pt#;    % uppercase curve breadth
+cap_ess#:=25/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=25/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=34/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=34/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=22/36pt#;    % vertical diameter of hairlines
+notch_cut#:=25/36pt#;    % maximum breadth above or below notches
+bar#:=22/36pt#;      % lowercase bar thickness
+slab#:=22/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=22/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=10/36pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/6;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olss10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olss10.mf
new file mode 100644
index 00000000000..17c80afd275
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olss10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olss10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif 10 pt
+% based on Computer Modern Sans Serif 10 pt
+% (cmss10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSS"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=15/36pt#;    % width adjustment for certain characters
+serif_fit#:=-7/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-10/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=250/36pt#;    % height of caps
+fig_height#:=236/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=79/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=45/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=17/36pt#;    % width of extrafine details
+hair#:=28/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=28/36pt#;    % lowercase curve breadth
+ess#:=28/36pt#;      % breadth in middle of lowercase s
+flare#:=25/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=30/36pt#;    % diameter of dots
+cap_hair#:=28/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=32/36pt#;    % uppercase curve breadth
+cap_ess#:=32/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=22/36pt#;    % vertical diameter of hairlines
+notch_cut#:=18/36pt#;    % maximum breadth above or below notches
+bar#:=21/36pt#;      % lowercase bar thickness
+slab#:=23/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=20/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=5/36pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.96;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olss12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olss12.mf
new file mode 100644
index 00000000000..810d6eee72c
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olss12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olss12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif 12 pt
+% based on Computer Modern Sans Serif 12 pt
+% (cmss12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSS"; font_size 12pt#;
+
+u#:=23.5/36pt#;      % unit width
+width_adj#:=17/36pt#;    % width adjustment for certain characters
+serif_fit#:=-9/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-13/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=324/36pt#;  % height of tallest characters
+asc_height#:=300/36pt#;    % height of lowercase ascenders
+cap_height#:=300/36pt#;    % height of caps
+fig_height#:=283/36pt#;    % height of numerals
+x_height#:=192/36pt#;    % height of lowercase without ascenders
+math_axis#:=108/36pt#;    % axis of symmetry for math symbols
+bar_height#:=97/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=54/36pt#;    % depth of comma below baseline
+desc_depth#:=84/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=20/36pt#;    % width of extrafine details
+hair#:=33/36pt#;    % lowercase hairline breadth
+stem#:=33/36pt#;    % lowercase stem breadth
+curve#:=33/36pt#;    % lowercase curve breadth
+ess#:=33/36pt#;      % breadth in middle of lowercase s
+flare#:=30/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=35/36pt#;    % diameter of dots
+cap_hair#:=33/36pt#;    % uppercase hairline breadth
+cap_stem#:=37/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=37/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.44pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.6/36pt#;    % vertical protrusion of beak serifs
+vair#:=26/36pt#;    % vertical diameter of hairlines
+notch_cut#:=22/36pt#;    % maximum breadth above or below notches
+bar#:=25/36pt#;      % lowercase bar thickness
+slab#:=27/36pt#;    % serif and arm thickness
+cap_bar#:=26/36pt#;    % uppercase bar thickness
+cap_band#:=24/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=31/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=6/36pt#;    % extra width at diagonal junctions
+
+o#:=9/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.98;      % factor applied to weights of heavy characters
+math_spread:=-0.2;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olss17.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olss17.mf
new file mode 100644
index 00000000000..869ff41a88a
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olss17.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olss17.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif 17 pt (more or less)
+% based on Computer Modern Sans Serif 17 pt
+% (cmss17.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSS"; font_size 17.28pt#;
+
+u#:=32.5/36pt#;      % unit width
+width_adj#:=24/36pt#;    % width adjustment for certain characters
+serif_fit#:=-12/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-17/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=466/36pt#;  % height of tallest characters
+asc_height#:=432/36pt#;    % height of lowercase ascenders
+cap_height#:=432/36pt#;    % height of caps
+fig_height#:=408/36pt#;    % height of numerals
+x_height#:=267.8/36pt#;    % height of lowercase without ascenders
+math_axis#:=155.5/36pt#;  % axis of symmetry for math symbols
+bar_height#:=136/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=78/36pt#;    % depth of comma below baseline
+desc_depth#:=121/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=28/36pt#;    % width of extrafine details
+hair#:=47/36pt#;    % lowercase hairline breadth
+stem#:=47/36pt#;    % lowercase stem breadth
+curve#:=47/36pt#;    % lowercase curve breadth
+ess#:=47/36pt#;      % breadth in middle of lowercase s
+flare#:=42/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=50/36pt#;    % diameter of dots
+cap_hair#:=47/36pt#;    % uppercase hairline breadth
+cap_stem#:=52/36pt#;    % uppercase stem breadth
+cap_curve#:=52/36pt#;    % uppercase curve breadth
+cap_ess#:=52/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.8/36pt#;    % vertical protrusion of beak serifs
+vair#:=38/36pt#;    % vertical diameter of hairlines
+notch_cut#:=32/36pt#;    % maximum breadth above or below notches
+bar#:=36/36pt#;      % lowercase bar thickness
+slab#:=40/36pt#;    % serif and arm thickness
+cap_bar#:=38/36pt#;    % uppercase bar thickness
+cap_band#:=35/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=46/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=7/36pt#;    % extra width at diagonal junctions
+
+o#:=10/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=-0.4;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olss8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olss8.mf
new file mode 100644
index 00000000000..7e5c2f2a1db
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olss8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olss8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif 8 pt
+% based on Computer Modern Sans Serif 8 pt
+% (cmss8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSS"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=12/36pt#;    % width adjustment for certain characters
+serif_fit#:=-6/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-8.5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=216/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=200/36pt#;    % height of caps
+fig_height#:=189/36pt#;    % height of numerals
+x_height#:=128/36pt#;    % height of lowercase without ascenders
+math_axis#:=72/36pt#;    % axis of symmetry for math symbols
+bar_height#:=63/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=37/36pt#;    % depth of comma below baseline
+desc_depth#:=56/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=15/36pt#;    % width of extrafine details
+hair#:=25/36pt#;    % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=25/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=22/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=26/36pt#;    % diameter of dots
+cap_hair#:=25/36pt#;    % uppercase hairline breadth
+cap_stem#:=29/36pt#;    % uppercase stem breadth
+cap_curve#:=29/36pt#;    % uppercase curve breadth
+cap_ess#:=28/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.4/36pt#;    % vertical protrusion of beak serifs
+vair#:=19/36pt#;    % vertical diameter of hairlines
+notch_cut#:=16/36pt#;    % maximum breadth above or below notches
+bar#:=18/36pt#;      % lowercase bar thickness
+slab#:=20/36pt#;    % serif and arm thickness
+cap_bar#:=19/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=22/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=4/36pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.93;      % factor applied to weights of heavy characters
+math_spread:=.4;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olss9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olss9.mf
new file mode 100644
index 00000000000..944460e6937
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olss9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olss9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif 9 pt
+% based on Computer Modern Sans Serif 9 pt
+% (cmss9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSS"; font_size 9pt#;
+
+u#:=18.5/36pt#;      % unit width
+width_adj#:=13/36pt#;    % width adjustment for certain characters
+serif_fit#:=-6.5/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-9/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=243/36pt#;  % height of tallest characters
+asc_height#:=225/36pt#;    % height of lowercase ascenders
+cap_height#:=225/36pt#;    % height of caps
+fig_height#:=212/36pt#;    % height of numerals
+x_height#:=144/36pt#;    % height of lowercase without ascenders
+math_axis#:=81/36pt#;    % axis of symmetry for math symbols
+bar_height#:=71/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=41/36pt#;    % depth of comma below baseline
+desc_depth#:=63/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=16/36pt#;    % width of extrafine details
+hair#:=27/36pt#;    % lowercase hairline breadth
+stem#:=27/36pt#;    % lowercase stem breadth
+curve#:=27/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=24/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=28/36pt#;    % diameter of dots
+cap_hair#:=27/36pt#;    % uppercase hairline breadth
+cap_stem#:=31/36pt#;    % uppercase stem breadth
+cap_curve#:=31/36pt#;    % uppercase curve breadth
+cap_ess#:=31/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.38pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=21/36pt#;    % vertical diameter of hairlines
+notch_cut#:=17/36pt#;    % maximum breadth above or below notches
+bar#:=20/36pt#;      % lowercase bar thickness
+slab#:=22/36pt#;    % serif and arm thickness
+cap_bar#:=21/36pt#;    % uppercase bar thickness
+cap_band#:=19/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=24/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=4.5/36pt#;    % extra width at diagonal junctions
+
+o#:=7/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.95;      % factor applied to weights of heavy characters
+math_spread:=.2;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssbx10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssbx10.mf
new file mode 100644
index 00000000000..291af8b6f80
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssbx10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssbx10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif Bold Extended 10 pt
+% based on Computer Modern Sans Serif Bold Extended 10 pt
+% (cmssbx10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSBX"; font_size 10pt#;
+
+u#:=22/36pt#;      % unit width
+width_adj#:=22/36pt#;    % width adjustment for certain characters
+serif_fit#:=-9/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-11/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=250/36pt#;    % height of caps
+fig_height#:=250/36pt#;    % height of numerals
+x_height#:=165/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=90/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=38/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=26/36pt#;    % diameter of serif corners
+tiny#:=26/36pt#;    % diameter of rounded corners
+fine#:=9/36pt#;      % diameter of sharply rounded corners
+thin_join#:=9/36pt#;    % width of extrafine details
+hair#:=49/36pt#;    % lowercase hairline breadth
+stem#:=49/36pt#;    % lowercase stem breadth
+curve#:=49/36pt#;    % lowercase curve breadth
+ess#:=43/36pt#;      % breadth in middle of lowercase s
+flare#:=40/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=47/36pt#;    % diameter of dots
+cap_hair#:=49/36pt#;    % uppercase hairline breadth
+cap_stem#:=53/36pt#;    % uppercase stem breadth
+cap_curve#:=53/36pt#;    % uppercase curve breadth
+cap_ess#:=51/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=30/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=1.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=26/36pt#;    % vertical diameter of hairlines
+notch_cut#:=49/36pt#;    % maximum breadth above or below notches
+bar#:=26/36pt#;      % lowercase bar thickness
+slab#:=36/36pt#;    % serif and arm thickness
+cap_bar#:=34/36pt#;    % uppercase bar thickness
+cap_band#:=31/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=45/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=2/36pt#;    % for small refinements of hairline height
+apex_corr#:=18/36pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.88;      % factor applied to weights of heavy characters
+math_spread:=.5;    % extra openness of math symbols
+superness:=3/4;      % parameter for superellipses
+superpull:=1/18;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssdc10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssdc10.mf
new file mode 100644
index 00000000000..f7e26d446ed
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssdc10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssdc10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif Demibold Condensed 10 pt
+% based on Computer Modern Sans Serif Demibold Condensed 10 pt
+% (cmssdc10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSDC"; font_size 10pt#;
+
+u#:=19/36pt#;      % unit width
+width_adj#:=15/36pt#;    % width adjustment for certain characters
+serif_fit#:=-8/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-9/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=250/36pt#;    % height of caps
+fig_height#:=250/36pt#;    % height of numerals
+x_height#:=170/36pt#;    % height of lowercase without ascenders
+math_axis#:=95/36pt#;    % axis of symmetry for math symbols
+bar_height#:=95/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=40/36pt#;    % depth of comma below baseline
+desc_depth#:=60/36pt#;    % depth of lowercase descenders
+
+crisp#:=23/36pt#;    % diameter of serif corners
+tiny#:=23/36pt#;    % diameter of rounded corners
+fine#:=8/36pt#;      % diameter of sharply rounded corners
+thin_join#:=8/36pt#;    % width of extrafine details
+hair#:=40/36pt#;    % lowercase hairline breadth
+stem#:=40/36pt#;    % lowercase stem breadth
+curve#:=40/36pt#;    % lowercase curve breadth
+ess#:=37/36pt#;      % breadth in middle of lowercase s
+flare#:=31/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=40/36pt#;    % uppercase hairline breadth
+cap_stem#:=44/36pt#;    % uppercase stem breadth
+cap_curve#:=44/36pt#;    % uppercase curve breadth
+cap_ess#:=42/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=25/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=1.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=23/36pt#;    % vertical diameter of hairlines
+notch_cut#:=40/36pt#;    % maximum breadth above or below notches
+bar#:=23/36pt#;      % lowercase bar thickness
+slab#:=31/36pt#;    % serif and arm thickness
+cap_bar#:=29/36pt#;    % uppercase bar thickness
+cap_band#:=27/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=37/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=2/36pt#;    % for small refinements of hairline height
+apex_corr#:=14/36pt#;    % extra width at diagonal junctions
+
+o#:=7/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.91;      % factor applied to weights of heavy characters
+math_spread:=.3;    % extra openness of math symbols
+superness:=.74;      % parameter for superellipses
+superpull:=1/18;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=true;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssi10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssi10.mf
new file mode 100644
index 00000000000..99771c614da
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssi10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssi10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Sans Serif 10 pt
+% based on Computer Modern Slanted Sans Serif 10 pt
+% (cmssi10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSI"; font_size 10pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=15/36pt#;    % width adjustment for certain characters
+serif_fit#:=-7/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-10/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=250/36pt#;    % height of caps
+fig_height#:=236/36pt#;    % height of numerals
+x_height#:=160/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=79/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=45/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=17/36pt#;    % width of extrafine details
+hair#:=28/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=28/36pt#;    % lowercase curve breadth
+ess#:=28/36pt#;      % breadth in middle of lowercase s
+flare#:=25/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=30/36pt#;    % diameter of dots
+cap_hair#:=28/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=32/36pt#;    % uppercase curve breadth
+cap_ess#:=32/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=22/36pt#;    % vertical diameter of hairlines
+notch_cut#:=18/36pt#;    % maximum breadth above or below notches
+bar#:=21/36pt#;      % lowercase bar thickness
+slab#:=23/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=20/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=5/36pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(媛elta x/媛elta y)$
+fudge:=.96;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssi12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssi12.mf
new file mode 100644
index 00000000000..898f541e4d0
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssi12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssi12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Sans Serif 12 pt
+% based on Computer Modern Slanted Sans Serif 12 pt
+% (cmssi12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSI"; font_size 12pt#;
+
+u#:=23.5/36pt#;      % unit width
+width_adj#:=17/36pt#;    % width adjustment for certain characters
+serif_fit#:=-9/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-13/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=324/36pt#;  % height of tallest characters
+asc_height#:=300/36pt#;    % height of lowercase ascenders
+cap_height#:=300/36pt#;    % height of caps
+fig_height#:=283/36pt#;    % height of numerals
+x_height#:=192/36pt#;    % height of lowercase without ascenders
+math_axis#:=108/36pt#;    % axis of symmetry for math symbols
+bar_height#:=97/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=54/36pt#;    % depth of comma below baseline
+desc_depth#:=84/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=20/36pt#;    % width of extrafine details
+hair#:=33/36pt#;    % lowercase hairline breadth
+stem#:=33/36pt#;    % lowercase stem breadth
+curve#:=33/36pt#;    % lowercase curve breadth
+ess#:=33/36pt#;      % breadth in middle of lowercase s
+flare#:=30/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=35/36pt#;    % diameter of dots
+cap_hair#:=33/36pt#;    % uppercase hairline breadth
+cap_stem#:=37/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=37/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.44pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.6/36pt#;    % vertical protrusion of beak serifs
+vair#:=26/36pt#;    % vertical diameter of hairlines
+notch_cut#:=22/36pt#;    % maximum breadth above or below notches
+bar#:=25/36pt#;      % lowercase bar thickness
+slab#:=27/36pt#;    % serif and arm thickness
+cap_bar#:=26/36pt#;    % uppercase bar thickness
+cap_band#:=24/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=31/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=6/36pt#;    % extra width at diagonal junctions
+
+o#:=9/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(主elta x/主elta y)$
+fudge:=.98;      % factor applied to weights of heavy characters
+math_spread:=-0.2;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssi17.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssi17.mf
new file mode 100644
index 00000000000..d1d6f6ec41e
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssi17.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssi17.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Sans Serif 17 pt (more or less)
+% based on Computer Modern Slanted Sans Serif 17 pt
+% (cmssi17.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSI"; font_size 17.28pt#;
+
+u#:=32.5/36pt#;      % unit width
+width_adj#:=24/36pt#;    % width adjustment for certain characters
+serif_fit#:=-12/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-17/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=466/36pt#;  % height of tallest characters
+asc_height#:=432/36pt#;    % height of lowercase ascenders
+cap_height#:=432/36pt#;    % height of caps
+fig_height#:=408/36pt#;    % height of numerals
+x_height#:=267.8/36pt#;    % height of lowercase without ascenders
+math_axis#:=155.5/36pt#;  % axis of symmetry for math symbols
+bar_height#:=136/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=78/36pt#;    % depth of comma below baseline
+desc_depth#:=121/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=28/36pt#;    % width of extrafine details
+hair#:=47/36pt#;    % lowercase hairline breadth
+stem#:=47/36pt#;    % lowercase stem breadth
+curve#:=47/36pt#;    % lowercase curve breadth
+ess#:=47/36pt#;      % breadth in middle of lowercase s
+flare#:=42/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=50/36pt#;    % diameter of dots
+cap_hair#:=47/36pt#;    % uppercase hairline breadth
+cap_stem#:=52/36pt#;    % uppercase stem breadth
+cap_curve#:=52/36pt#;    % uppercase curve breadth
+cap_ess#:=52/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.6pt#;    % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.8/36pt#;    % vertical protrusion of beak serifs
+vair#:=38/36pt#;    % vertical diameter of hairlines
+notch_cut#:=32/36pt#;    % maximum breadth above or below notches
+bar#:=36/36pt#;      % lowercase bar thickness
+slab#:=40/36pt#;    % serif and arm thickness
+cap_bar#:=38/36pt#;    % uppercase bar thickness
+cap_band#:=35/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=46/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=7/36pt#;    % extra width at diagonal junctions
+
+o#:=10/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(主elta x/主elta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=-0.4;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssi8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssi8.mf
new file mode 100644
index 00000000000..907171be30a
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssi8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssi8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Sans Serif 8 pt
+% based on Computer Modern Slanted Sans Serif 8 pt
+% (cmssi8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSI"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=12/36pt#;    % width adjustment for certain characters
+serif_fit#:=-6/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-8.5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=216/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=200/36pt#;    % height of caps
+fig_height#:=189/36pt#;    % height of numerals
+x_height#:=128/36pt#;    % height of lowercase without ascenders
+math_axis#:=72/36pt#;    % axis of symmetry for math symbols
+bar_height#:=63/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=37/36pt#;    % depth of comma below baseline
+desc_depth#:=56/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=15/36pt#;    % width of extrafine details
+hair#:=25/36pt#;    % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=25/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=22/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=26/36pt#;    % diameter of dots
+cap_hair#:=25/36pt#;    % uppercase hairline breadth
+cap_stem#:=29/36pt#;    % uppercase stem breadth
+cap_curve#:=29/36pt#;    % uppercase curve breadth
+cap_ess#:=28/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.4/36pt#;    % vertical protrusion of beak serifs
+vair#:=19/36pt#;    % vertical diameter of hairlines
+notch_cut#:=16/36pt#;    % maximum breadth above or below notches
+bar#:=18/36pt#;      % lowercase bar thickness
+slab#:=20/36pt#;    % serif and arm thickness
+cap_bar#:=19/36pt#;    % uppercase bar thickness
+cap_band#:=17/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=22/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=4/36pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(主elta x/主elta y)$
+fudge:=.93;      % factor applied to weights of heavy characters
+math_spread:=.4;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssi9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssi9.mf
new file mode 100644
index 00000000000..e206907df06
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssi9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssi9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Slanted Sans Serif 9 pt
+% based on Computer Modern Slanted Sans Serif 9 pt
+% (cmssi9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSI"; font_size 9pt#;
+
+u#:=18.5/36pt#;      % unit width
+width_adj#:=13/36pt#;    % width adjustment for certain characters
+serif_fit#:=-6.5/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-9/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=243/36pt#;  % height of tallest characters
+asc_height#:=225/36pt#;    % height of lowercase ascenders
+cap_height#:=225/36pt#;    % height of caps
+fig_height#:=212/36pt#;    % height of numerals
+x_height#:=144/36pt#;    % height of lowercase without ascenders
+math_axis#:=81/36pt#;    % axis of symmetry for math symbols
+bar_height#:=71/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=41/36pt#;    % depth of comma below baseline
+desc_depth#:=63/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=0pt#;      % diameter of rounded corners
+fine#:=0pt#;      % diameter of sharply rounded corners
+thin_join#:=16/36pt#;    % width of extrafine details
+hair#:=27/36pt#;    % lowercase hairline breadth
+stem#:=27/36pt#;    % lowercase stem breadth
+curve#:=27/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=24/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=28/36pt#;    % diameter of dots
+cap_hair#:=27/36pt#;    % uppercase hairline breadth
+cap_stem#:=31/36pt#;    % uppercase stem breadth
+cap_curve#:=31/36pt#;    % uppercase curve breadth
+cap_ess#:=31/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.38pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=.5/36pt#;    % vertical protrusion of beak serifs
+vair#:=21/36pt#;    % vertical diameter of hairlines
+notch_cut#:=17/36pt#;    % maximum breadth above or below notches
+bar#:=20/36pt#;      % lowercase bar thickness
+slab#:=22/36pt#;    % serif and arm thickness
+cap_bar#:=21/36pt#;    % uppercase bar thickness
+cap_band#:=19/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=24/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=2/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=4.5/36pt#;    % extra width at diagonal junctions
+
+o#:=7/36pt#;      % amount of overshoot for curves
+apex_o#:=0pt#;      % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(主elta x/主elta y)$
+fudge:=.95;      % factor applied to weights of heavy characters
+math_spread:=.2;    % extra openness of math symbols
+superness:=1/sqrt 2;    % parameter for superellipses
+superpull:=1/20;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssq8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssq8.mf
new file mode 100644
index 00000000000..9503ea39042
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssq8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssq8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif Quotation Style 8 point
+% based on Computer Modern Sans Serif Quotation Style 8 point
+% (cmssq8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSQ"; font_size 8pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=2/36pt#;    % width adjustment for certain characters
+serif_fit#:=-10/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-14/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=220/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=197/36pt#;    % height of caps
+fig_height#:=190/36pt#;    % height of numerals
+x_height#:=150/36pt#;    % height of lowercase without ascenders
+math_axis#:=80/36pt#;    % axis of symmetry for math symbols
+bar_height#:=80/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=40/36pt#;    % depth of comma below baseline
+desc_depth#:=40/36pt#;    % depth of lowercase descenders
+
+crisp#:=18/36pt#;    % diameter of serif corners
+tiny#:=18/36pt#;    % diameter of rounded corners
+fine#:=8/36pt#;      % diameter of sharply rounded corners
+thin_join#:=8/36pt#;    % width of extrafine details
+hair#:=23/36pt#;    % lowercase hairline breadth
+stem#:=23/36pt#;    % lowercase stem breadth
+curve#:=23/36pt#;    % lowercase curve breadth
+ess#:=23/36pt#;      % breadth in middle of lowercase s
+flare#:=21/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=28/36pt#;    % diameter of dots
+cap_hair#:=23/36pt#;    % uppercase hairline breadth
+cap_stem#:=27/36pt#;    % uppercase stem breadth
+cap_curve#:=27/36pt#;    % uppercase curve breadth
+cap_ess#:=27/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=20/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=0pt#;      % vertical protrusion of beak serifs
+vair#:=18/36pt#;    % vertical diameter of hairlines
+notch_cut#:=23/36pt#;    % maximum breadth above or below notches
+bar#:=18/36pt#;      % lowercase bar thickness
+slab#:=19/36pt#;    % serif and arm thickness
+cap_bar#:=19/36pt#;    % uppercase bar thickness
+cap_band#:=19/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=23/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=.5/36pt#;    % for small refinements of stem breadth
+vair_corr#:=.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=4/36pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=2/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=.95;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/10;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=true;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olssqi8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olssqi8.mf
new file mode 100644
index 00000000000..c0d60581eb0
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olssqi8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olssqi8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Sans Serif Quotation Style Slanted 8 point
+% based on Computer Modern Sans Serif Quotation Style Slanted 8 point
+% (cmssqi8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLSSQI"; font_size 8pt#;
+
+u#:=20/36pt#;      % unit width
+width_adj#:=2/36pt#;    % width adjustment for certain characters
+serif_fit#:=-10/36pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=-14/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=220/36pt#;  % height of tallest characters
+asc_height#:=200/36pt#;    % height of lowercase ascenders
+cap_height#:=197/36pt#;    % height of caps
+fig_height#:=190/36pt#;    % height of numerals
+x_height#:=150/36pt#;    % height of lowercase without ascenders
+math_axis#:=80/36pt#;    % axis of symmetry for math symbols
+bar_height#:=80/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=40/36pt#;    % depth of comma below baseline
+desc_depth#:=40/36pt#;    % depth of lowercase descenders
+
+crisp#:=18/36pt#;    % diameter of serif corners
+tiny#:=18/36pt#;    % diameter of rounded corners
+fine#:=8/36pt#;      % diameter of sharply rounded corners
+thin_join#:=8/36pt#;    % width of extrafine details
+hair#:=23/36pt#;    % lowercase hairline breadth
+stem#:=23/36pt#;    % lowercase stem breadth
+curve#:=23/36pt#;    % lowercase curve breadth
+ess#:=23/36pt#;      % breadth in middle of lowercase s
+flare#:=21/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=28/36pt#;    % diameter of dots
+cap_hair#:=23/36pt#;    % uppercase hairline breadth
+cap_stem#:=27/36pt#;    % uppercase stem breadth
+cap_curve#:=27/36pt#;    % uppercase curve breadth
+cap_ess#:=27/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=20/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=0pt#;      % protrusion of lowercase serifs
+cap_jut#:=0pt#;      % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=0pt#;      % vertical protrusion of beak serifs
+vair#:=18/36pt#;    % vertical diameter of hairlines
+notch_cut#:=23/36pt#;    % maximum breadth above or below notches
+bar#:=18/36pt#;      % lowercase bar thickness
+slab#:=19/36pt#;    % serif and arm thickness
+cap_bar#:=19/36pt#;    % uppercase bar thickness
+cap_band#:=19/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=23/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=.5/36pt#;    % for small refinements of stem breadth
+vair_corr#:=.5/36pt#;    % for small refinements of hairline height
+apex_corr#:=4/36pt#;    % extra width at diagonal junctions
+
+o#:=6/36pt#;      % amount of overshoot for curves
+apex_o#:=2/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=sind 12/cosd 12;    % tilt ratio $(主elta x/主elta y)$
+fudge:=.95;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/10;    % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=true;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=false;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=true;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oltt10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oltt10.mf
new file mode 100644
index 00000000000..7c850b8ec76
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oltt10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE oltt10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Typewriter Text for use with 10 point
+% based on Computer Modern Typewriter Text for use with 10 point
+% (cmtt10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLTT"; font_size 10pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=79/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=22/36pt#;    % diameter of rounded corners
+fine#:=21/36pt#;    % diameter of sharply rounded corners
+thin_join#:=21/36pt#;    % width of extrafine details
+hair#:=25/36pt#;    % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=25/36pt#;    % lowercase curve breadth
+ess#:=22/36pt#;      % breadth in middle of lowercase s
+flare#:=32/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=36/36pt#;    % diameter of dots
+cap_hair#:=25/36pt#;    % uppercase hairline breadth
+cap_stem#:=25/36pt#;    % uppercase stem breadth
+cap_curve#:=25/36pt#;    % uppercase curve breadth
+cap_ess#:=25/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=25/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=34/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=34/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=22/36pt#;    % vertical diameter of hairlines
+notch_cut#:=25/36pt#;    % maximum breadth above or below notches
+bar#:=22/36pt#;      % lowercase bar thickness
+slab#:=22/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=22/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=10/36pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oltt12.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oltt12.mf
new file mode 100644
index 00000000000..01da76e581a
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oltt12.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE oltt12.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Typewriter Text for use with 12 point
+% based on Computer Modern Typewriter Text for use with 12 point
+% (cmtt12.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLTT"; font_size 12pt#;
+
+u#:=24.7/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=300/36pt#;  % height of tallest characters
+asc_height#:=264/36pt#;    % height of lowercase ascenders
+cap_height#:=264/36pt#;    % height of caps
+fig_height#:=264/36pt#;    % height of numerals
+x_height#:=186/36pt#;    % height of lowercase without ascenders
+math_axis#:=132/36pt#;    % axis of symmetry for math symbols
+bar_height#:=95/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=60/36pt#;    % depth of comma below baseline
+desc_depth#:=96/36pt#;    % depth of lowercase descenders
+
+crisp#:=25/36pt#;    % diameter of serif corners
+tiny#:=25/36pt#;    % diameter of rounded corners
+fine#:=22/36pt#;    % diameter of sharply rounded corners
+thin_join#:=22/36pt#;    % width of extrafine details
+hair#:=28/36pt#;    % lowercase hairline breadth
+stem#:=28/36pt#;    % lowercase stem breadth
+curve#:=28/36pt#;    % lowercase curve breadth
+ess#:=25/36pt#;      % breadth in middle of lowercase s
+flare#:=35/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=39/36pt#;    % diameter of dots
+cap_hair#:=28/36pt#;    % uppercase hairline breadth
+cap_stem#:=28/36pt#;    % uppercase stem breadth
+cap_curve#:=28/36pt#;    % uppercase curve breadth
+cap_ess#:=28/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=28/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=39/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=39/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=39/36pt#;    % vertical protrusion of beak serifs
+vair#:=25/36pt#;    % vertical diameter of hairlines
+notch_cut#:=28/36pt#;    % maximum breadth above or below notches
+bar#:=25/36pt#;      % lowercase bar thickness
+slab#:=25/36pt#;    % serif and arm thickness
+cap_bar#:=25/36pt#;    % uppercase bar thickness
+cap_band#:=25/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=28/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=11/36pt#;    % extra width at diagonal junctions
+
+o#:=5/36pt#;      % amount of overshoot for curves
+apex_o#:=4/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.86;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oltt8.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oltt8.mf
new file mode 100644
index 00000000000..695c108c408
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oltt8.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE oltt8.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Typewriter Text for use with 8 point
+% based on Computer Modern Typewriter Text for use with 8 point
+% (cmtt8.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLTT"; font_size 8pt#;
+
+u#:=17/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=200/36pt#;  % height of tallest characters
+asc_height#:=176/36pt#;    % height of lowercase ascenders
+cap_height#:=176/36pt#;    % height of caps
+fig_height#:=176/36pt#;    % height of numerals
+x_height#:=124/36pt#;    % height of lowercase without ascenders
+math_axis#:=88/36pt#;    % axis of symmetry for math symbols
+bar_height#:=63/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=40/36pt#;    % depth of comma below baseline
+desc_depth#:=64/36pt#;    % depth of lowercase descenders
+
+crisp#:=19/36pt#;    % diameter of serif corners
+tiny#:=19/36pt#;    % diameter of rounded corners
+fine#:=18/36pt#;    % diameter of sharply rounded corners
+thin_join#:=18/36pt#;    % width of extrafine details
+hair#:=22/36pt#;    % lowercase hairline breadth
+stem#:=22/36pt#;    % lowercase stem breadth
+curve#:=22/36pt#;    % lowercase curve breadth
+ess#:=19/36pt#;      % breadth in middle of lowercase s
+flare#:=28/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=31/36pt#;    % diameter of dots
+cap_hair#:=22/36pt#;    % uppercase hairline breadth
+cap_stem#:=22/36pt#;    % uppercase stem breadth
+cap_curve#:=22/36pt#;    % uppercase curve breadth
+cap_ess#:=22/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=22/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=27/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=27/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=27/36pt#;    % vertical protrusion of beak serifs
+vair#:=19/36pt#;    % vertical diameter of hairlines
+notch_cut#:=22/36pt#;    % maximum breadth above or below notches
+bar#:=19/36pt#;      % lowercase bar thickness
+slab#:=19/36pt#;    % serif and arm thickness
+cap_bar#:=19/36pt#;    % uppercase bar thickness
+cap_band#:=19/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=22/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=8/36pt#;    % extra width at diagonal junctions
+
+o#:=3/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oltt9.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oltt9.mf
new file mode 100644
index 00000000000..b92354fcb67
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oltt9.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE oltt9.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Typewriter Text for use with 9 point
+% based on Computer Modern Typewriter Text for use with 9 point
+% (cmtt9.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLTT"; font_size 9pt#;
+
+u#:=18.9/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=225/36pt#;  % height of tallest characters
+asc_height#:=198/36pt#;    % height of lowercase ascenders
+cap_height#:=198/36pt#;    % height of caps
+fig_height#:=198/36pt#;    % height of numerals
+x_height#:=139.5/36pt#;    % height of lowercase without ascenders
+math_axis#:=99/36pt#;    % axis of symmetry for math symbols
+bar_height#:=71/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=45/36pt#;    % depth of comma below baseline
+desc_depth#:=72/36pt#;    % depth of lowercase descenders
+
+crisp#:=21/36pt#;    % diameter of serif corners
+tiny#:=21/36pt#;    % diameter of rounded corners
+fine#:=20/36pt#;    % diameter of sharply rounded corners
+thin_join#:=20/36pt#;    % width of extrafine details
+hair#:=24/36pt#;    % lowercase hairline breadth
+stem#:=24/36pt#;    % lowercase stem breadth
+curve#:=24/36pt#;    % lowercase curve breadth
+ess#:=21/36pt#;      % breadth in middle of lowercase s
+flare#:=30/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=33/36pt#;    % diameter of dots
+cap_hair#:=24/36pt#;    % uppercase hairline breadth
+cap_stem#:=24/36pt#;    % uppercase stem breadth
+cap_curve#:=24/36pt#;    % uppercase curve breadth
+cap_ess#:=24/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=24/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=31/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=31/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=31/36pt#;    % vertical protrusion of beak serifs
+vair#:=21/36pt#;    % vertical diameter of hairlines
+notch_cut#:=24/36pt#;    % maximum breadth above or below notches
+bar#:=21/36pt#;      % lowercase bar thickness
+slab#:=21/36pt#;    % serif and arm thickness
+cap_bar#:=21/36pt#;    % uppercase bar thickness
+cap_band#:=21/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=24/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=9/36pt#;    % extra width at diagonal junctions
+
+o#:=3.5/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=0;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=true;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/olvtt10.mf b/Master/texmf-dist/fonts/source/public/oldlatin/olvtt10.mf
new file mode 100644
index 00000000000..58cc3301097
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/olvtt10.mf
@@ -0,0 +1,80 @@
+% THIS IS THE OLD LATIN SOURCE FILE olvtt10.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Variable-Width Typewriter Text for use with 10 point
+% based on Computer Modern Variable-Width Typewriter Text for use with 10 point
+% (cmvtt10.mf by D E Knuth)
+if unknown cmbase: input cmbase fi
+
+font_identifier:="OLVTT"; font_size 10pt#;
+
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=0pt#;    % extra sidebar near uppercase serifs
+letter_fit#:=0pt#;    % extra space added to all sidebars
+
+body_height#:=250/36pt#;  % height of tallest characters
+asc_height#:=220/36pt#;    % height of lowercase ascenders
+cap_height#:=220/36pt#;    % height of caps
+fig_height#:=220/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=110/36pt#;    % axis of symmetry for math symbols
+bar_height#:=79/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=50/36pt#;    % depth of comma below baseline
+desc_depth#:=80/36pt#;    % depth of lowercase descenders
+
+crisp#:=22/36pt#;    % diameter of serif corners
+tiny#:=22/36pt#;    % diameter of rounded corners
+fine#:=21/36pt#;    % diameter of sharply rounded corners
+thin_join#:=21/36pt#;    % width of extrafine details
+hair#:=25/36pt#;    % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=25/36pt#;    % lowercase curve breadth
+ess#:=22/36pt#;      % breadth in middle of lowercase s
+flare#:=32/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=36/36pt#;    % diameter of dots
+cap_hair#:=25/36pt#;    % uppercase hairline breadth
+cap_stem#:=25/36pt#;    % uppercase stem breadth
+cap_curve#:=25/36pt#;    % uppercase curve breadth
+cap_ess#:=25/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=25/36pt#;  % thickness of lines in math symbols
+
+dish#:=0pt#;      % amount erased at top or bottom of serifs
+bracket#:=0pt#;      % vertical distance from serif base to tangent
+jut#:=34/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=34/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=0pt#;    % horizontal protrusion of beak serifs
+beak#:=34/36pt#;    % vertical protrusion of beak serifs
+vair#:=22/36pt#;    % vertical diameter of hairlines
+notch_cut#:=25/36pt#;    % maximum breadth above or below notches
+bar#:=22/36pt#;      % lowercase bar thickness
+slab#:=22/36pt#;    % serif and arm thickness
+cap_bar#:=22/36pt#;    % uppercase bar thickness
+cap_band#:=22/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=25/36pt#;  % max breadth above/below uppercase notches
+serif_drop#:=0pt#;    % vertical drop of sloped serifs
+stem_corr#:=0pt#;    % for small refinements of stem breadth
+vair_corr#:=0pt#;    % for small refinements of hairline height
+apex_corr#:=10/36pt#;    % extra width at diagonal junctions
+
+o#:=4/36pt#;      % amount of overshoot for curves
+apex_o#:=3/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=0;      % tilt ratio $(主elta x/主elta y)$
+fudge:=0.81;      % factor applied to weights of heavy characters
+math_spread:=-1;    % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=0;      % extra openness inside bowls
+beak_darkness:=0;    % fraction of triangle inside beak serifs
+ligs:=2;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=true;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=true;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+generate oroman      % switch to the driver file
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oroman.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oroman.mf
new file mode 100644
index 00000000000..13f68e597f1
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oroman.mf
@@ -0,0 +1,75 @@
+% THIS IS THE OLD LATIN SOURCE FILE oroman.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% The Old Latin Roman family of fonts
+% based on roman.mf and
+% used with The Computer Modern Roman family of fonts
+% (by D. E. Knuth, 1979--1985)
+
+if ligs>1: font_coding_scheme:="TeX text";
+ spanish_shriek=oct"074"; spanish_query=oct"076";
+else: font_coding_scheme:=if ligs=0: "TeX typewriter text"
+  else: "TeX text without f-ligatures" fi;
+ spanish_shriek=oct"016"; spanish_query=oct"017"; fi
+
+mode_setup; font_setup;
+
+input romanu;  % upper case (majuscules)
+input oromanl;  % lower case (minuscules)
+input greeku;  % upper case Greek letters
+input romand;  % numerals
+input romanp;  % ampersand, question marks, currency sign
+input romspl;  % lowercase specials (dotless \i, ligature \ae, etc.)
+input romspu;  % uppercase specials (\AE, \OE, \O)
+input punct;  % punctuation symbols common to roman and italic text
+input accent;  % accents common to roman and italic text
+if ligs>1: input oromlig; fi  % letter ligatures
+if ligs>1: input oromligs; fi  % letter ligatures langes Es
+if ligs>0: input comlig; fi  % ligatures common with italic text
+if ligs<=1: input romsub; fi  % substitutes for ligatures
+
+ligtable "!": "`" =: spanish_shriek;
+ligtable "?": "`" =: spanish_query;
+font_slant slant; font_x_height x_height#;
+if monospace: font_normal_space 9u#; % no stretching or shrinking
+ font_quad 18u#;
+ font_extra_space 9u#;
+% added for "rundes es" normaly defined in oromligs.mf
+ ligtable "s": ":"=:oct"363";
+else: font_normal_space 6u#+2letter_fit#;
+ font_normal_stretch 3u#; font_normal_shrink 2u#;
+ font_quad 18u#+4letter_fit#;
+ font_extra_space 2u#;
+ k#:=-.5u#; kk#:=-1.5u#; kkk#:=-2u#; % three degrees of kerning
+ ligtable "k": if serifs: "v": "a" kern -u#, fi\\"w": "e" kern k#,
+  "a" kern k#, "o" kern k#, "c" kern k#;
+ ligtable "P": "A" kern kk#,
+  "y": "o" kern k#, "e" kern k#, "a" kern k#, "." kern kk#, "," kern kk#;
+ ligtable "F": "V": "W": if serifs: "o" kern kk#, "e" kern kk#, "u" kern kk#,
+    "r" kern kk#, "a" kern kk#, "A" kern kkk#,
+   else: "o" kern k#, "e" kern k#, "u" kern k#,
+    "r" kern k#, "a" kern k#, "A" kern kk#, fi
+  "K": "X": "O" kern k#, "C" kern k#, "G" kern k#, "Q" kern k#;
+ ligtable "T": "y" kern if serifs: k# else: kk# fi,
+  "Y": "e" kern kk#, "o" kern kk#,
+   "r" kern kk#, "a" kern kk#, "A" kern kk#, "u" kern kk#;
+ ligtable "O": "D": "X" kern k#, "W" kern k#, "A" kern k#,
+   "V" kern k#, "Y" kern k#;
+ if serifs: ligtable "h": "m": "n":
+   "t" kern k#, "u" kern k#, "b" kern k#, "y" kern k#, "v" kern k#, "w" kern k#;
+  ligtable "c": "h" kern k#, "k" kern k# if ligs>1:, "t"=:oct"343" fi; fi
+% for tiny font like 5pt or smallcaps
+ if ligs=1: ligtable "s": ":"=:oct"363"; fi
+ ligtable "o": "b": "p": "e" kern -k#, "o" kern -k#, "x" kern k#,
+   "d" kern -k#, "c" kern -k#, "q" kern -k#,
+  "a": if serifs: "v" kern k#, "j" kern u#, else: "r" kern k#, fi
+  "t": "y" kern k#,
+  "u": "w" kern k#;
+ ligtable "A": if serifs: "R": fi\\ "t" kern k#,
+  "C" kern k#, "O" kern k#, "G" kern k#, "U" kern k#, "Q" kern k#,
+  "L": "T" kern kk#, "Y" kern kk#, "V" kern kkk#, "W" kern kkk#;
+ ligtable "g": "j" kern -k#; % logjam
+ ligtable "I": "I" kern -k#; fi % Richard III
+ % there are ligature/kern programs for |"f"| in the {\tt oromlig} file
+ % and for |"-"|, |"`"|, and |"'"| in the {\tt comlig} file
+bye.
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oromanl.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oromanl.mf
new file mode 100644
index 00000000000..3aee1b7174c
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oromanl.mf
@@ -0,0 +1,843 @@
+% THIS IS THE OLD LATIN SOURCE FILE oromanl.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin Roman lower case
+% based on Computer Modern Roman lower case
+% (romanl.mf by D E Knuth):
+% These letters were originally coded by D. E. Knuth in November, 1979,
+% inspired by the Monotype faces used in {\sl The Art of Computer Programming}.
+% Sans serif designs by Richard Southall were added in April, 1982.
+% The programs were revised for the new \MF\ conventions in 1985.
+
+% Character codes \0141 through \0172 are generated.
+
+cmchar "The letter a";
+beginchar("a",9u#,x_height#,0);
+bh#:=min(bar_height#,1.14x_height#-bar_height#); define_pixels(bh);
+italcorr 1/3[bh#,x_height#]*slant+.5stem#-serif_fit#-2u#;
+adjust_fit(0,serif_fit# if serifs: if hair#+.5stem#>1.5u#:-.25u# fi\\fi);
+pickup fine.nib; top y3r=h+vround 1.5oo;
+if serifs: pos1(flare,180); pos2(hair,180);
+ pos3(vair,90);  lft x1r=hround max(u,2.1u-.5flare); x3=.5w-.5u;
+ y1=min(bh+.5flare+2vair+2,.9[bh,h]-.5flare);
+ bulb(3,2,1);  % bulb
+else: pos1(5/7[vair,flare],95); x1l=good.x 1.5u; x1r:=good.x x1r;
+ pos3(1/8[vair,thin_join],90);
+ x3=.5w-.2u; top y1r=vround .82[bh,top y3r];
+ filldraw stroke term.e(3,1,left,.9,4); fi  % terminal
+pos4(stem,0); rt x4r=hround(w-2.5u+.5stem); y4=1/3[bh,h];
+pos5(stem,0); x5=x4; y5=max(.55bh,2vair);
+filldraw stroke super_arc.e(3,4)&z4e..z5e;  % arc and stem
+pos6(.3[thin_join,vair],90); x6=x4; bot y6=bh;
+pos7(hround(curve-2stem_corr),180);
+lft x7r=hround max(.5u,1.5u-.5curve); y7=1/3[top y8l,top y6r];
+pos8(vair,270); x8l=.5w-.75u; bot y8r=-oo;
+pos9(thin_join,360); z9l=z5l;
+(x,y8r)=whatever[z8l,z9l]; x8r:=max(x,x8-u);
+{{interim superness:=more_super;
+ filldraw stroke z9e{down}...z8e{left}...{up}z7e&super_arc.e(7,6)}}; % bowl
+if serifs: numeric shaved_stem; shaved_stem=hround(stem-3stem_corr);
+ if hair#+.5stem#>1.5u#: pickup tiny.nib;
+  pos5'(shaved_stem,0); rt x5'r=fine.rt x5r; y5'=y5;
+  pos10(shaved_stem,0); x10=x5'; y10=.2[.5tiny,bh];
+  pos11(shaved_stem,0); rt x11r=hround(w-.25u); bot y11=0;
+  pos12(shaved_stem,0); x11=x12; top y12=slab+eps;
+  filldraw z5'l---z10l...z11l{right}--z11r
+   --z12r{left}...z10r+.75(z12-z11)---z5'r--cycle;  % foot
+ else: pickup crisp.nib; pos5'(shaved_stem,0); rt x5'r=fine.rt x5r; y5'=y5;
+  pos10(shaved_stem,0); x10=x5'; y10=1/3bh;
+  pos11(.2[vair,stem],90); x11r=.5[x10r,x12r]; bot y11l=-vround .5oo;
+  pos12(hair,180); rt x12l=hround(w-.1u); y12=max(y10,y11+vair);
+  pos13(hair,180); x13=x12; top y13=max(vround .6bh,top y12);
+  (x',y11l)=whatever[z11r,z12r]; x11l:=max(x',x10);
+  filldraw stroke z5'e---z10e...z11e{right}...z12e---z13e; fi  % hook
+else: numeric shaved_stem; shaved_stem=hround(stem-stem_corr);
+ pickup tiny.nib; pos5'(shaved_stem,0); rt x5'r=fine.rt x5r; y5'=y5;
+ pos10(shaved_stem,0); x10=x5'; bot y10=0;
+ filldraw stroke z5'e--z10e; fi  % base of stem
+penlabels(1,2,3,4,5,6,7,8,9,10,11,12,13); endchar;
+
+cmchar "The letter b";
+beginchar("b",10u#+serif_fit#,asc_height#,0);
+italcorr .5x_height#*slant+min(.5curve#-u#,-.25u#);
+adjust_fit(serif_fit#,0);
+pickup tiny.nib; pos1(stem',0); pos2(stem,0);
+pos0'(stem',0); pos0(stem,0); z0l=z0'l; x0'=x1; x0=x2;
+lft x1l=hround(2.5u-.5stem'); top y1=h;
+numeric edge; edge=rt x2r;
+pickup fine.nib; pos3(if hefty:thin_join else: hair fi,180);
+pos4(vair,90); pos5(curve,0); pos6(vair,-90); penpos7(x3l-x3r,-180);
+rt x3l=max(rt x3l-(lft x3r-tiny.lft x2l),1/3[rt x2,edge]);
+y3=1/8[bar_height,x_height];
+x4l=w-.5(w-serif_fit)+.5u; top y4r=x_height+oo;
+rt x5r=hround min(w-1.35u+.5curve,w-.6u); y5=.5x_height;
+x6l=x4l-.2u; bot y6r=-oo;
+x7=x3; y7=min(y3,y6+y4-y3+.6vair);
+(x,y4r)=whatever[z3l,z4l]; x4r:=min(x,.5[x4,x5r]);
+(x',y6r)=whatever[z7l,z6l]; x6r:=min(x',.5[x6,x5r]);
+filldraw stroke z3e{up}...pulled_arc.e(4,5)&pulled_arc.e(5,6)...{up}z7e; % bowl
+y0=ypart(((edge,h)--(edge,0))intersectionpoint(z3l{up}...{right}z4l));
+y2=ypart(((edge,h)--(edge,0))intersectionpoint(z6l{left}...{up}z7l));
+pickup tiny.nib; filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+pickup crisp.nib; pos8(hair,0); pos7'(stem,0);
+z7'=z2; x8l=x7'l; bot y8=0;
+filldraw stroke z7'e--z8e;  % point
+if serifs: sloped_serif.l(1,0',a,1/3,jut,serif_drop); fi  % upper serif
+penlabels(0,1,2,3,4,5,6,7,8); endchar;
+
+cmchar "The letter c";
+beginchar("c",8u#,x_height#,0);
+italcorr x_height#*slant-.2u#;
+adjust_fit(if monospace: .5u#,.5u# else: 0,0 fi);
+pickup fine.nib; pos2(vair',90); pos4(vair',270);
+x2=x4=.5(w+u); top y2r=vround(h+1.5oo); bot y4r=-oo;
+pos3(curve,180); lft x3r=hround max(.6u,1.35u-.5curve); y3=.5h;
+if serifs: pos1(hair,0); pos0(flare,0);
+ y1=min(bar_height+.5flare+2vair'+2,.9[bar_height,h]-.5flare);
+ rt x1r=hround(w-.7u); bulb(2,1,0);  % bulb
+ pos5(hair,0); rt x5r=hround(w-.5u);
+ y5=max(good.y(.5bar_height-.9),y4l+vair');
+ (x,y4l)=whatever[z4r,z5l]; x4l:=min(x,x4l+.5u);
+ filldraw stroke pulled_super_arc.e(2,3)(.7superpull)
+  & pulled_super_arc.e(3,4)(.5superpull)
+  ..tension .9 and 1..{x5-x4,5(y5-y4)}z5e;  % arc and lower terminal
+else: pos1(4/7[vair',flare],80);
+ rt x1r=hround(w-.6u); top y1r=vround .82[bar_height,top y2r];
+ filldraw stroke term.e(2,1,right,.8,4);  % upper terminal
+ pos5(.6[vair',flare],275); rt x5r=hround(w-.5u);
+ y5r=good.y(y5r+1/3bar_height-y5); y5l:=good.y y5l; x5l:=good.x x5l;
+ forsuffixes e=l,r: path p.e; p.e=z4e{right}..tension .9 and 1..z5e;
+  if angle direction 1 of p.e>75:
+   p.e:=z4e{right}..tension atleast.9 and 1..{dir 75}z5e; fi endfor
+ filldraw stroke pulled_super_arc.e(2,3)(.7superpull)
+  & pulled_super_arc.e(3,4)(.5superpull) & p.e; fi  % arc and lower terminal
+penlabels(0,1,2,3,4,5); endchar;
+
+cmchar "The letter d";
+beginchar("d",10u#+serif_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); pos2(stem,0);
+pos0'(stem',0); pos0(stem,0); z0r=z0'r; x0'=x1; x0=x2;
+rt x1r=hround(w-2.5u+.5stem'); top y1=h;
+numeric edge; edge=lft x2l;
+pickup fine.nib; pos3(if hefty:thin_join else: hair fi,0);
+pos4(vair,90); pos5(curve,180); pos6(vair,270); penpos7(x3r-x3l,360);
+lft x3l=min(lft x3l-(rt x3r-tiny.rt x2r),1/3[lft x2,edge]);
+y3=1/8[bar_height,x_height];
+x4l=.5(w-serif_fit)-.3u; top y4r=x_height+oo;
+lft x5r=hround max(1.35u-.5curve,.6u); y5=.5x_height;
+x6l=x4l-.2u; bot y6r=-oo;
+x7=x3; y7=min(y3,y6+y4-y3+.6vair);
+(x,y4r)=whatever[z3l,z4l]; x4r:=max(x,.5[x5r,x4]);
+(x',y6r)=whatever[z7l,z6l]; x6r:=max(x',.5[x5r,x6]);
+filldraw stroke z3e{up}...pulled_arc.e(4,5)
+ & pulled_arc.e(5,6)...{up}z7e; % bowl
+y0=ypart(((edge,h)--(edge,0))intersectionpoint(z3l{up}...{left}z4l));
+pickup tiny.nib; bot y2=if serifs:-min(oo,serif_drop) else: 0 fi;
+filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+if serifs: sloped_serif.l(1,0',a,1/3,jut,serif_drop);  % upper serif
+ sloped_serif.r(2,0,b,1/3,jut,min(oo,serif_drop)); fi  % lower serif
+penlabels(0,1,2,3,4,5,6,7); endchar;
+
+cmchar "The letter e";
+beginchar("e",7.25u#+max(.75u#,.5curve#),x_height#,0);
+italcorr .5[bar_height#,x_height#]*slant+.5min(curve#-1.5u#,0);
+adjust_fit(if monospace: .25u#,.5u# else: 0,0 fi);
+numeric left_curve,right_curve;
+left_curve=right_curve+6stem_corr=curve if not serifs: -3stem_corr fi;
+if right_curve<tiny.breadth: right_curve:=tiny.breadth; fi
+if left_curve<tiny.breadth: left_curve:=tiny.breadth; fi
+pickup tiny.nib; pos1(right_curve,0);
+pos2(vair,90); pos3(left_curve,180);
+y1=good.y bar_height; top y2r=h+vround 1.5oo; y0l=bot y1;
+rt x1r=hround min(w-.5u,w-u+.5right_curve);
+lft x3r=hround max(.5u,1.25u-.5left_curve); x2=.5w+.25u;
+{{interim superness:=more_super;
+ filldraw stroke super_arc.e(1,2)}};  % right bowl
+y3=.5[y2,y4]; bot y4r=-oo; x4=x2+.25u;
+if serifs: pos4(vair',270); pos5(hair,360);
+ y5=max(good.y(.5bar_height-.9),y4l+vair); x5r=x1r;
+ (x,y4l)=whatever[z4r,z5]; x4l:=min(x,x4l+.5u);
+ filldraw stroke pulled_arc.e(2,3) & pulled_arc.e(3,4)
+  ...{x5-x4,5(y5-y4)}z5e; % left bowl, arc, and terminal
+else: pos4(vair,270);
+ filldraw stroke super_arc.e(2,3) & super_arc.e(3,4);  % left bowl and arc
+ pickup fine.nib; pos4'(vair,270); z4=z4';
+ pos5(.5[vair,flare],275); rt x5r=hround(w-.6u);
+ y5r=good.y(y5r+1/3bar_height-y5); y5l:=good.y y5l; x5l:=good.x x5l;
+ filldraw stroke term.e(4',5,right,1,4); fi  % terminal
+path testpath; testpath=super_arc.r(2,3) & super_arc.r(3,4);
+y1'r=y0r=y0l+.6[thin_join,vair]; y1'l=y0l; x1'l=x1'r=x1;
+forsuffixes $=l,r:
+ x0$=xpart(((0,y0$)--(x1,y0$)) intersectionpoint testpath); endfor
+fill stroke z0e--z1'e;  % crossbar
+penlabels(0,1,2,3,4,5); endchar;
+
+cmchar "The letter f";
+beginchar("f",5.5u#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(stem_shift#,if monospace: .5u# else:-stem_shift# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pickup fine.nib; numeric bulb_diam;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); y2+.5bulb_diam=.9[x_height,h+oo];
+ if monospace: rt x2r=hround(w-.5u)+1 else: lft x2l=hround(w-.75u+.5) fi;
+else: pos2(5/7[vair,flare],90); top y2r=h;
+ rt x2=hround(if monospace:w-.5u else:w+.75u fi); fi
+f_stroke(1,2,a,b,c,jut,if not monospace:1.25fi\\ jut); % stem, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=hround(w-if monospace:.75u+1 else:1/3u fi);
+filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4); endchar;
+
+iff not variant_g: cmchar "The letter g";
+beginchar("g",9u#,x_height#,desc_depth#);
+italcorr x_height#*slant+.25u#;
+adjust_fit(0,0);
+numeric light_vair,light_curve,loop_top,loop_side;
+light_vair=Vround(.5[thin_join,vair]+vair_corr);
+light_curve=max(fine.breadth,hround(curve-3stem_corr));
+loop_top=if serifs: Vround .77[vair,fudged.stem] else: vair fi;
+loop_side=hround .64[vair,fudged.stem];
+pickup fine.nib; pos1(light_vair,90);
+pos2(light_curve,180); pos3(light_vair,270);
+pos4(light_curve,360); pos11(loop_top,90);
+y11r=good.y(y11r+.15bar_height-y11); x1=x3=.5[x2,x4]; y2=y4=.5[y1,y3];
+lft x2r=hround(1.75u-.5light_curve); rt x4r=hround(w-2.75u+.5light_curve);
+top y1r=h+oo; y3r=good.y(y3r+.27[top y11r,bot y1l]-y3);
+filldraw stroke pulled_arc.e(1,2) & pulled_arc.e(2,3);  % left half of bowl
+filldraw stroke pulled_arc.e(3,4) & pulled_arc.e(4,1);  % right half of bowl
+x0=superness[x1r,x4r]; y0=superness[y4r,y1r];  % NE point on the super bowl
+x8'=superness[x3r,x2r]; y8'=superness[y2r,y3r];  % SW point on the super bowl
+x8''=superness[x3,x2]; y8''=superness[y2,y3];
+pos0(thin_join,angle(z0-z8')+90);
+pos8(thin_join,angle(z0-z8')-90); z8=.618[z8',z8''];
+if serifs: pos5(vair,90);
+ pos6(hair,0); pos7(.5[hair,flare],0); x5=.75[x0,x6]; top y5r=h+o;
+ rt x6r=hround(w-.25u); y6+(.5[hair,flare])/2=.95[bar_height,h]+oo;
+ filldraw stroke z0e..{right}z5e; bulb(5,6,7);  % ear
+else: pos5(vair',100); top y5r=h+oo;
+ rt x5l=hround(w-.25u); y5l:=good.y y5l;
+ filldraw z0l{z5-z0}..z5l--z5r{left}..{curl 1}z0r--cycle; fi  % ear
+pos10(loop_top,90); x10=x8+.75u; y10=y11;
+pos12(loop_side,0); pos13(light_vair,-90);
+pos14(loop_side,-180); pos10'(.5[thin_join,vair],-270);
+rt x12r=hround max(w-1.25u+.5loop_side,w-.5u); y12=y14=.5[y11,y13];
+x11=x13=max(.5w,x10+eps); bot y13r=-d-oo-1; x14=w-x12; z10'l=z10l;
+filldraw stroke z8e{z8-z0}..z10e---z11e;  % link
+filldraw stroke {{interim superness:=hein_super; super_arc.e(11,12)}}
+ & super_arc.e(12,13) & super_arc.e(13,14) & super_arc.e(14,10');  % loop
+penlabels(0,1,2,3,4,5,6,7,8,10,11,12,13,14); labels(8',8''); endchar;
+
+iff variant_g: cmchar "Variant letter g";
+beginchar("g",10u#+serif_fit#,x_height#,desc_depth#);
+italcorr x_height#*slant-serif_fit#+.5stem#-2u# if serifs:+.5u# fi;
+adjust_fit(0,serif_fit# if serifs: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); pos2(stem,0);
+pos0'(stem',0); pos0(stem,0); z0r=z0'r; x0'=x1; x0=x2;
+rt x1r=hround(w-2.5u+.5stem');
+numeric edge; edge=lft x2l;
+path edge_path; edge_path=(edge,h)--(edge,0);
+pickup fine.nib; pos3(if hefty:thin_join else: hair fi,0);
+pos4(vair,90); pos5(curve,180); pos6(vair,270); penpos7(x3r-x3l,360);
+lft x3l=min(lft x3l-(rt x3r-tiny.rt x2r),2/3[lft x2,edge]); y3=bar_height;
+x4l=.5(w-serif_fit)-.3u; top y4r=x_height+oo;
+lft x5r=hround max(1.35u-.5curve,.6u); y5=.5x_height;
+x6l=x4l-.2u; bot y6r=vround 1/3vair;
+lft x7l=edge; y7=min(y3,y6+y4-y3+.6vair);
+(x,y4r)=whatever[z3l,z4l]; x4r:=max(x,.5[x5r,x4]);
+(x',y6r)=whatever[z7l,z6l]; x6r:=max(x',.5[x5r,x6]);
+filldraw stroke z3e{up}...{left}z4e&super_arc.e(4,5)
+ &super_arc.e(5,6)&z6e{right}...{up}z7e;  % bowl
+y1=ypart(edge_path intersectionpoint(z3l{up}...{left}z4l));
+y0=ypart(edge_path intersectionpoint(z7l{down}...{left}z6l));
+pickup tiny.nib; bot y2=if serifs: -.25d else: 0 fi;
+filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+pickup crisp.nib;
+pos8(hround(hair-stem_corr),0); pos7'(stem',0);
+z7'=z1; x8r=x7'r; top y8=h+oo;
+filldraw stroke z7'e--z8e;  % point
+if serifs: pickup tiny.nib;
+ pos9(vair,-90); x9=.5[x2,x10]; bot y9r=-d-o-1;
+ pos10(hair,-180); lft x10r=hround u; y10=-.75d+.5flare;
+ pos11(flare,-180); z11r=z10r;
+ bulb(9,10,11); filldraw stroke super_arc.e(2,9);  % tail
+else: pickup fine.nib; pos2'(stem,0); z2'=z2;
+ z2''r=z2'r; z2''=z2'; z2''l=(x2'l,0);
+ pos9(vair,-90); x9=4.5u; bot y9r=-d-o-1;
+ pos10(.5[vair,flare],-90); lft x10=hround 1.25u;
+ y10r=good.y -5/6d; y10l:=good.y y10l;
+ filldraw stroke z2'e..z2''e&super_arc.e(2'',9)
+  & term.e(9,10,left,.9,4); fi  % tail
+penlabels(0,1,2,3,4,5,6,7,8,9,10,11); endchar;
+
+cmchar "The letter h";
+beginchar("h",10u#,asc_height#,0);
+italcorr .5[bar_height#,x_height#]*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+stem_shift#,serif_fit#-stem_shift#);
+pickup tiny.nib; pos1(stem,0); pos2(stem,0);
+pos1'(stem',0); pos2'(stem',0); pos3(stem,0);
+lft x1l=hround(2.5u-.5stem); x1l=x1'l=x2l=x2'l; x3=w-x1;
+top y1=h; bot y2=0; y1=y1'; y2=y2';
+filldraw stroke z1'e--z2'e;  % left stem
+h_stroke(2,a,3,4);  % arch and right stem
+if serifs: sloped_serif.l(1',2',b,1/3,jut,serif_drop); % upper left serif
+ numeric inner_jut; pickup tiny.nib;
+ if rt x2r+jut+.5u+1<=lft x4l-jut: inner_jut=jut;
+ else: rt x2r+jut+.5u+1=lft x4l-inner_jut; fi
+ dish_serif(2,1,c,1/3,jut,d,1/3,jut); % lower left serif
+ dish_serif(4,3,e,1/3,inner_jut,f,1/3,jut); fi % lower right serif
+penlabels(1,2,3,4); endchar;
+
+cmchar "The letter i";
+numeric dot_diam#; dot_diam#=max(dot_size#,cap_curve#);
+beginchar("i",5u#,min(asc_height#,10/7x_height#+.5dot_diam#),0);
+define_whole_blacker_pixels(dot_diam);
+italcorr h#*slant-serif_fit# + .5dot_diam# -2u#;
+adjust_fit(serif_fit#+stem_shift# if monospace:+.25u#fi,serif_fit#-stem_shift#);
+pickup tiny.nib; pos1(stem',0); pos2(stem',0);
+if odd(w-stem'): change_width; fi
+lft x1l=hround(.5w-.5stem'); x1=x2;
+top y1=x_height if serifs: +min(oo,serif_drop) fi; bot y2=0;
+filldraw stroke z1e--z2e;  % stem
+pos3(dot_diam,0); pos4(dot_diam,90);
+if serifs: x3r=max(x1r,hround(x1+.5dot_diam-.2jut)-.5tiny)
+else: x3=x1-.5 fi;
+top y4r=h+1;
+if bot y4l-top y1<slab: y4l:=min(y4r-eps,y1+tiny+slab); fi
+x3=x4; y3=.5[y4l,y4r]; dot(3,4);  % dot
+if serifs: sloped_serif.l(1,2,a,1/3,.95jut,serif_drop);  % upper serif
+ dish_serif(2,1,b,1/3,jut,c,1/3,.9jut); fi  % lower serif
+penlabels(1,2,3,4); endchar;
+
+cmchar "The letter j";
+numeric dot_diam#; dot_diam#=max(dot_size#,cap_curve#);
+beginchar("j",5.5u#,min(asc_height#,10/7x_height#+.5dot_diam#),desc_depth#);
+define_whole_blacker_pixels(dot_diam);
+italcorr h#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+2stem_shift# if monospace:+\\.5u# fi,
+ serif_fit#-2stem_shift# if monospace:-.5u# fi);
+pickup tiny.nib; pos1(stem',0); pos2(stem',0);
+rt x1r=hround(.5w+.25u+.5stem'); x1=x2;
+top y1=x_height if serifs: +min(oo,serif_drop) fi; bot y2=-1/3d;
+filldraw stroke z1e--z2e;  % stem
+pos3(dot_diam,0); pos4(dot_diam,90);
+x3r=x1r; top y4r=h+1;
+if bot y4l-top y1<slab: y4l:=min(y4r-eps,y1+tiny+slab); fi
+x3=x4; y3=.5[y4l,y4r]; dot(3,4);  % dot
+if serifs: sloped_serif.l(1,2,a,1/3,1.1jut,serif_drop);  % upper serif
+ pickup tiny.nib; pos5(vair,-90); pos6(hair,-180); pos7(flare,-180);
+ x5=.5[x2,x6r]; bot y5r=-d-oo; y6-.5flare=-.88d;
+ if monospace: lft x6r=0 else: z6r=z7r; rt x7l=floor .75u fi;
+ (x,y5r)=whatever[z5l,z2l]; x5r:=max(x,.5[x6r,x5]);
+ filldraw stroke z2e{down}...z5e{left};  bulb(5,6,7); % arc and bulb
+else: pickup fine.nib; pos2'(stem',0); z2'=z2;
+ pos6(.2[vair,stem'],-90); pos7(vair,-90);
+ lft x7r=hround -.75u; bot y7r=vround 5/6(-d-oo);
+ (x,y7l)=whatever[z7r,z3]; x7l:=x;
+ z5r=z2'r; (x2'l,y5l)=whatever[z7l,z5r]; x5l=x2'l; y5=y5r;
+ x6r=.5[x7r,x5r]; x6l:=.5[x7l,x5l]; bot y6r=-d-oo;
+ filldraw stroke z2'e..{down}z5e & super_arc.e(5,6)
+  & z6e{left}..z7e; fi  % arc and terminal
+penlabels(1,2,3,4,5,6,7); endchar;
+
+cmchar "The letter k";
+beginchar("k",9.5u#,asc_height#,0);
+italcorr x_height#*slant-.2u#;
+adjust_fit(serif_fit#,serif_fit#); pickup tiny.nib;
+numeric right_jut,stem[],alpha[];
+stem1=max(tiny.breadth,hround(fudged.stem-stem_corr));
+stem2=max(tiny.breadth,hround(fudged.stem-2stem_corr));
+stem3=max(tiny.breadth,hround(fudged.hair if hefty:-\\4stem_corr fi));
+stem4=max(tiny.breadth,hround(fudged.stem-3stem_corr));
+if serifs: right_jut=.6jut; else: right_jut=.4tiny; fi
+pos1(stem1,0); pos2(stem2,0); top y1=h; bot y2=0;
+lft x1l=lft x2l=hround(2.5u-.5stem1);
+top y3=x_height; rt x3r=hround(r-letter_fit-.7u-right_jut)+eps;
+bot y6=0; rt x6r=hround(r-letter_fit-.3u-right_jut)+eps;
+x4=x11=x1; y4=.7bar_height; y11=y3;
+alpha1=diag_ratio(1,.5(stem3-tiny),y3-y4,x3r-x4);
+alpha2=diag_ratio(1,.5(stem4-tiny),y11-y6,x6r-x1);
+penpos3(alpha1*(stem3-tiny),0); penpos4(whatever,-90);
+z5=.5[z5l,z5r]; penpos6(alpha2*(stem4-tiny),0);
+forsuffixes $=l,r: y3'$=x_height; y6'$=0; z4$=z3'$+whatever*(z3-z4);
+ z5$=z6'$+whatever*(z11-z6)=whatever[z3,z4]; endfor
+z3'r=z3r+penoffset z3-z4 of currentpen+whatever*(z3-z4);
+% we have also |z3'l=z3l+penoffset z4-z3 of currentpen+whatever*(z3-z4)|;\]
+z6'r=z6r+penoffset z11-z6 of currentpen+whatever*(z11-z6);
+z6'l=z6l+penoffset z6-z11 of currentpen+whatever*(z11-z6);
+fill z4r--diag_end(4r,3'r,1,.5,3'l,4l)--z4l--cycle;  % upper diagonal
+fill z5l--diag_end(5l,6'l,.5,1,6'r,5r)--z5r--cycle;  % lower diagonal
+pos0(stem1,0); pos0'(stem2,0); y0=y0'; x0=x1; x0'=x2;
+rt z0r=whatever[z3,z4]; filldraw stroke z1e..z0e--z0'e..z2e; % stem
+if serifs: numeric inner_jut;
+ if rt x2r+jut+.5u+1<=lft x6l-jut: inner_jut=jut;
+ else: rt x2r+inner_jut+.5u+1=lft x6l-inner_jut; fi
+ sloped_serif.l(1,0,a,1/3,jut,serif_drop); % upper stem serif
+ dish_serif(2,0',b,1/3,jut,c,1/3,inner_jut);  % lower stem serif
+ dish_serif(3,4,d,2/3,1.4jut,e,1/2,right_jut)(dark); % upper diagonal serif
+ dish_serif(6,5,f,1/2,inner_jut,g,1/3,right_jut)(dark);fi % lower diagonal serif
+penlabels(0,1,2,3,4,5,6,11); endchar;
+
+cmchar "The letter l";
+beginchar("l",5u#,asc_height#,0); l_width#:=5u#+2serif_fit#;
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+stem_shift#,serif_fit#-stem_shift#);
+pickup tiny.nib; pos1(stem',0); pos2(stem',0);
+if odd(w-stem'): change_width; fi
+lft x1l=hround(.5w-.5stem'); x1=x2; top y1=h; bot y2=0;
+filldraw stroke z1e--z2e;  % stem
+if serifs: sloped_serif.l(1,2,a,1/3,jut,serif_drop);  % upper serif
+ dish_serif(2,1,b,1/3,jut,c,1/3,jut); fi  % lower serif
+penlabels(1,2); endchar;
+
+cmchar "The letter m";
+beginchar("m",15u#,x_height#,0);
+italcorr .5[bar_height#,x_height#]*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+stem_shift#,serif_fit#-stem_shift#);
+numeric shaved_stem; shaved_stem=hround(mfudged.stem-2stem_corr);
+pickup tiny.nib; pos1(mfudged.stem,0); pos2(mfudged.stem,0);
+pos1'(shaved_stem,0); pos2'(shaved_stem,0);
+pos3(mfudged.stem,0); pos5(mfudged.stem,0);
+lft x1l=hround(2.5u-.5stem); x1l=x1'l=x2l=x2'l; % stem, sic
+lft x3l=hround(.5w-.5mfudged.stem); x5-x3=x3-x1;
+if not monospace: r:=hround(x5+x1)+r-w; fi  % change width for better fit
+top y1=h+min(oo,serif_drop); bot y2=0; y1=y1'; y2=y2';
+filldraw stroke z1'e--z2'e;  % left stem
+h_stroke(2,a,3,4);  % left arch and middle stem
+h_stroke(4,b,5,6);  % right arch and right stem
+if serifs: sloped_serif.l(1',2',c,1/3,jut,serif_drop); % upper left serif
+ numeric inner_jut; pickup tiny.nib;
+ if rt x2r+jut+.5u+1<=lft x4l-jut: inner_jut=jut;
+ else: rt x2r+jut+.5u+1=lft x4l-inner_jut; fi
+ dish_serif(2,1,d,1/3,jut,e,1/3,jut); % lower left serif
+ dish_serif(4,3,f,1/3,inner_jut,g,1/3,jut); % lower middle serif
+ dish_serif(6,5,h,1/3,inner_jut,i,1/3,jut); fi % lower right serif
+penlabels(1,2,3,4,5,6); endchar;
+
+cmchar "The letter n";
+beginchar("n",10u#,x_height#,0);
+italcorr .5[bar_height#,x_height#]*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+stem_shift#,serif_fit#-stem_shift#);
+pickup tiny.nib; pos1(stem,0); pos2(stem,0);
+numeric shaved_stem; shaved_stem=hround(stem-2stem_corr);
+pos1'(shaved_stem,0); pos2'(shaved_stem,0); pos3(stem,0);
+lft x1l=hround(2.5u-.5stem); x1l=x1'l=x2l=x2'l; x3=w-x1;
+top y1=h+min(oo,serif_drop); bot y2=0; y1=y1'; y2=y2';
+filldraw stroke z1'e--z2'e;  % left stem
+h_stroke(2,a,3,4);  % arch and right stem
+if serifs: sloped_serif.l(1',2',b,1/3,jut,serif_drop); % upper left serif
+ numeric inner_jut; pickup tiny.nib;
+ if rt x2r+jut+.5u+1<=lft x4l-jut: inner_jut=jut;
+ else: rt x2r+jut+.5u+1=lft x4l-inner_jut; fi
+ dish_serif(2,1,c,1/3,jut,d,1/3,jut); % lower left serif
+ dish_serif(4,3,e,1/3,inner_jut,f,1/3,jut); fi % lower right serif
+penlabels(1,2,3,4); endchar;
+
+cmchar "The letter o";
+beginchar("o",9u#,x_height#,0);
+italcorr .7x_height#*slant;
+adjust_fit(if monospace: .5u#,.5u# else: 0,0 fi);
+penpos1(vair,90); penpos3(vair',-90);
+penpos2(curve,180); penpos4(curve,0);
+x2r=hround max(.5u,1.25u-.5curve);
+x4r=w-x2r; x1=x3=.5w; y1r=h+vround 1.5oo; y3r=-oo;
+y2=y4=.5h-vair_corr; y2l:=y4l:=.52h;
+penstroke pulled_arc.e(1,2) & pulled_arc.e(2,3)
+ & pulled_arc.e(3,4) & pulled_arc.e(4,1) & cycle;  % bowl
+penlabels(1,2,3,4); endchar;
+
+cmchar "The letter p";
+beginchar("p",10u#+serif_fit#,x_height#,desc_depth#);
+italcorr .5x_height#*slant+min(.5curve#-.85u#,-.1u#);
+adjust_fit(serif_fit#,0);
+pickup tiny.nib; pos1(stem',0); pos2(stem,0);
+pos0'(stem',0); pos0(stem,0); z0l=z0'l; x0'=x1; x0=x2;
+lft x1l=hround(2.5u-.5stem'); top y1=h if serifs: +min(oo,serif_drop) fi;
+numeric edge; edge=rt x2r;
+pickup fine.nib; pos3(if hefty:thin_join else: hair fi,180);
+pos4(vair',90); pos5(curve,0); pos6(vair,-90); penpos7(x3l-x3r,-180);
+rt x3l=max(rt x3l-(lft x3r-tiny.lft x2l), 1/3[rt x2,edge]);
+y3=1/8[bar_height,x_height];
+x4l=w-.5(w-serif_fit)+.5u; top y4r=x_height+oo;
+rt x5r=hround min(w-1.35u+.5curve,w-.6u); y5=.5x_height;
+x6l=x4l-.2u; bot y6r=-oo;
+x7=x3; y7=min(y3,y6+y4-y3+.6vair);
+(x,y4r)=whatever[z3l,z4l]; x4r:=min(x,.5[x5r,x4]);
+(x',y6r)=whatever[z7l,z6l]; x6r:=min(x',.5[x5r,x6]);
+filldraw stroke z3e{up}...{right}z4e&super_arc.e(4,5)
+ &super_arc.e(5,6)&z6e{left}...{up}z7e;  % bowl
+y0=ypart(((edge,h)--(edge,0))intersectionpoint(z3l{up}...{right}z4l));
+pickup tiny.nib; bot y2=-d;
+filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+pickup crisp.nib; pos8(hair,0); pos7'(stem,0);
+z7'=z2; x8l=x7'l; bot y8=0;
+filldraw stroke z7'e--z8e;  % point
+if serifs: sloped_serif.l(1,0',a,1/3,jut,serif_drop);  % upper serif
+ dish_serif(2,0,b,1/3,jut,c,1/3,jut); fi  % lower serif
+penlabels(0,1,2,3,4,5,6,7,8); endchar;
+
+cmchar "The letter q";
+beginchar("q",10u#+serif_fit#,x_height#,desc_depth#);
+italcorr x_height#*slant-serif_fit#+.5stem#-2u# if serifs:+.5u# fi;
+adjust_fit(0,serif_fit# if serifs: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); pos2(stem,0);
+pos0'(stem',0); pos0(stem,0); z0r=z0'r; x0'=x1; x0=x2;
+rt x1r=hround(w-2.5u+.5stem');
+numeric edge; edge=lft x2l;
+pickup fine.nib; pos3(if hefty:thin_join else: hair fi,0);
+pos4(vair',90); pos5(curve,180); pos6(vair,270); penpos7(x3r-x3l,360);
+lft x3l=min(lft x3l-(rt x3r-tiny.rt x2r),2/3[lft x2,edge]); y3=bar_height;
+x4l=.5(w-serif_fit)-.3u; top y4r=x_height+oo;
+lft x5r=hround max(1.35u-.5curve,.6u); y5=.5x_height;
+x6l=x4l-.2u; bot y6r=-oo; y7=min(y3,y6+y4-y3+.6vair);
+lft x7l=min(lft x7l-(rt x7r-tiny.rt x2r),1/3[lft x2,edge]);
+(x,y4r)=whatever[z3l,z4l]; x4r:=max(x,.5[x5r,x4]);
+(x',y6r)=whatever[z7l,z6l]; x6r:=max(x',.5[x5r,x6]);
+filldraw stroke z3e{up}...{left}z4e&super_arc.e(4,5)
+ &super_arc.e(5,6)&z6e{right}...{up}z7e;  % bowl
+y1=ypart(((edge,h)--(edge,0))intersectionpoint(z3l{up}...{left}z4l));
+y0=ypart(((edge,h)--(edge,0))intersectionpoint(z6l{right}...{up}z7l));
+pickup tiny.nib; bot y2=-d;
+filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+pickup crisp.nib;
+pos8(hround(hair-stem_corr),0); pos7'(stem',0);
+z7'=z1; x8r=x7'r; top y8=h+oo;
+filldraw stroke z7'e--z8e;  % point
+if serifs: dish_serif(2,0,b,1/3,jut,c,1/3,jut); fi  % lower serif
+penlabels(0,1,2,3,4,5,6,7,8); endchar;
+
+cmchar "The letter r";
+numeric r_flare#; r_flare#=.75[if serifs: stem# else: vair# fi,flare#];
+define_whole_blacker_pixels(r_flare);
+beginchar("r",if serifs:max(7u#,5.5u#+r_flare#) else:6.5u# fi,x_height#,0);
+italcorr x_height#*slant if not serifs: +.25u# fi;
+adjust_fit(serif_fit#,0);
+pickup fine.nib; top y4r=h+oo;
+if serifs: pos4(vair,90); pos5(hair,0);
+ x4=w-max(1.75u,.25u+r_flare);
+ rt x5r=hround(w-.5u+.5); y5+.5r_flare=.9[bar_height,h]+oo;
+ pos6(r_flare,0); bulb(4,5,6);  % bulb
+else: pos4(r_flare,90); rt x4=hround(w-.25u); fi
+pos3(thin_join,180); rt x3l=hround(2.5u-.5stem')+stem'; top y3=bar_height;
+filldraw stroke z3e{up}...{right}z4e;  % arc
+pickup tiny.nib; pos0(stem',0); pos2(stem',0);
+pos1(hround(stem-3stem_corr),0); top y1=h+min(oo,serif_drop);
+pos0'(hround(stem-3stem_corr),0); y0=y0'=y3; x1l=x0l=x0'l=x2l;
+lft x1l=hround(2.5u-.5stem'); bot y2=0;
+filldraw stroke z1e--z0'e--z0e--z2e;  % stem
+if serifs: sloped_serif.l(1,0',a,1/3,jut,serif_drop);  % upper serif
+ dish_serif(2,0,b,1/3,jut,c,1/3,1.25jut); fi  % lower serif
+penlabels(1,2,3,4,5,6); endchar;
+
+cmchar "The letter langes Es";
+beginchar("s",5.5u#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(stem_shift#,if monospace: .5u# else:-stem_shift# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pickup fine.nib; numeric bulb_diam;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); y2+.5bulb_diam=.9[x_height,h+oo];
+ if monospace: rt x2r=hround(w-.5u)+1 else: lft x2l=hround(w-.75u+.5) fi;
+else: pos2(5/7[vair,flare],90); top y2r=h;
+ rt x2=hround(if monospace:w-.5u else:w+.75u fi); fi
+f_stroke(1,2,a,b,c,jut,if not monospace:1.25fi\\ jut); % stem, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=x1;
+filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4); endchar;
+
+cmchar "The letter kurzes Es";
+beginchar(oct"363",7.1u#,x_height#,0);
+italcorr x_height#*slant-if serifs:.55u# else:.3u# fi;
+adjust_fit(if monospace: .5u#,.4u# else: 0,if serifs:0 else:-.2u# fi fi);
+numeric theta; theta=90-angle(40u,h); slope:=-h/40u;  % angle at middle
+numeric s_slab; s_slab=if serifs:vair else:Vround .1[vair,stem] fi;
+numeric ess'; ess'=max(fine.breadth,ess);
+pickup fine.nib; pos2(max(fine.breadth,s_slab-vround vair_corr),-100);
+pos0(ess',theta); pos7(s_slab,-90); x2l=x0=x7=.5w;
+top y2l=h+vround 1.5oo; bot y7r=-oo;
+y0-.5ess'=y7l+if serifs:.54 else: .52 fi\\(y2r-y7l-ess');
+lft x3l=hround .6u; rt x6r=hround(w-.6u);
+x3r-x3l=x6r-x6l=hround .5[s_slab,ess']-fine;
+ellipse_set(2l,3l,4l,0l); ellipse_set(2r,3r,4r,0r); y3=y3r;
+ellipse_set(7l,6l,5l,0l); ellipse_set(7r,6r,5r,0r); y6=y6r;
+interim superness:=more_super;
+filldraw stroke super_arc.e(2,3) & z3e{down}
+ ..z4e---z5e..z6e{down} & super_arc.e(6,7);  % main stroke
+if serifs: pos1(hair,180); pos8(hair,180);
+ rt x1l=hround(w-1.05u); lft x8r=hround .6u;
+ bot y1=min(bot y2r,vround 1/5[top y5r,h]);
+ top y8=max(top y7l,vround 5/6 bot y4l);
+ filldraw stroke z1e{up}....{left}z2e;  % upper arc
+ filldraw stroke z7e{left}....{x8-x7,5(y8-y7)}z8e;  % lower arc
+ path upper_arc, lower_arc;
+ upper_arc=z1{up}....{left}z2; lower_arc=z7{left}....{x8-x7,5(y8-y7)}z8;
+ pos10(.3[fine.breadth,cap_hair],0); pos9(.3[fine.breadth,cap_hair],0);
+ x10r=x1l; top y10=top y2l; x9l=x8r; bot y9=bot y7r;
+ x1l-x1'=x8'-x8r=1.6cap_curve-fine; y1'=y1; y8'=y8;
+ numeric t; t=xpart(upper_arc intersectiontimes(z10l--z1'));
+ filldraw z1l--z10r--z10l--subpath(t,0) of upper_arc--cycle;  % upper barb
+ t:=xpart(lower_arc intersectiontimes(z9r--z8'));
+ filldraw z8r--z9l--z9r--subpath(t,1) of lower_arc--cycle;  % lower barb
+else: pos1(4/7[s_slab,flare],-100); pos8(flare,-100);
+ x1l=good.x(x1l+w-u-rt x1); lft x8r=hround .5u;
+ top y1l=vround(.93h+1.5oo); bot y8r=vround .1h-oo;
+ filldraw stroke term.e(2,1,right,.9,4);  % upper arc and terminal
+ filldraw stroke term.e(7,8,left,1,4); fi  % lower arc and terminal
+penlabels(0,1,1',2,3,4,5,6,7,8,8',9,10); endchar;
+
+cmchar "The letter t";
+beginchar("t",6u#+max(u#,.5stem#),
+ min(asc_height#,if hefty:9/7 else:10/7 fi\\ x_height#),0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos2(shaved_stem,180);pos3(shaved_stem,180);
+lft x2r=lft x3r=hround(2.5u-.5shaved_stem);
+y2=y8; y3=max(.5bar_height,2vair);
+pickup crisp.nib; pos8(bar,90);
+rt x8=hround(w-1.3u); top y8r=x_height; lft x7=hround 1/3u; y7l=y8l;
+if hefty: pos7(bar,90);
+ filldraw stroke z7e--z8e;  % crossbar
+ pickup tiny.nib; pos1(hround(shaved_stem-stem_corr),0);
+ rt x1r=fine.rt x2l; top y1=h;
+ penpos2'(x1r-x1l,0); x2'=x1; y2'=y2;
+ filldraw stroke z1e--z2'e;  % upper terminal
+else: pos7(vair,90); pos1(hair,0);
+ rt x1r=fine.rt x2l; top y1=h;
+ filldraw z1l{down}...{left}z7r--z7l--z8l
+  --z8r--(x1r,y8r)--z1r--cycle; fi  % upper terminal and crossbar
+pickup fine.nib; interim superness:=more_super;
+pos4(vair',-90); bot y4r=-oo; rt x5r=hround(w-u);
+if serifs: pos5(hair,0); y5=y3; x4l=.5[x3l,x5l];
+ (x,y4r)=whatever[z4l,z5l]; x4r:=max(x,.5[x3r,x4]);
+ filldraw stroke z2e..super_arc.e(3,4)...{up}z5e;  % stem and hook
+ pickup crisp.nib; pos6(hair,0); pos5'(hair,0);
+ x6=x5=x5'; top y6=max(vround .75bar_height,top y5); y5=y5';
+ filldraw stroke z5'e--z6e;  % terminal
+else: pos5(vair,-75); top y5l=vround .2[top y4l,bar_height];
+ x5l:=good.x x5l; x4l=1/3[x3l,x5l]; x4r:=1/3[x3r,x5r]; y3l:=y3l+.2vair;
+ filldraw stroke z2e..super_arc.e(3,4);  % stem and hook
+ path p; p=stroke z4e{right}..tension .9 and atleast 1..z5e;  % terminal
+ if (xpart(z5l-precontrol 1 of p)<0) or (xpart(z5r-postcontrol 2 of p)<0):
+  filldraw stroke z4e{right}...{up}z5e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,5,6,7,8); endchar;
+
+cmchar "The letter u";
+beginchar("u",10u#,x_height#,0);
+italcorr x_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(serif_fit#+stem_shift#,serif_fit#-stem_shift#);
+numeric light_vair; light_vair=vair if hefty: -vround 2vair_corr fi;
+if light_vair<fine.breadth: light_vair:=fine.breadth; fi
+pickup tiny.nib; pos1(stem,0); pos2(stem,0);
+pos3(stem,0); pos4(stem',0);
+lft x1l=hround(2.5u-.5stem); x1=x2; x3=w-x1; x3r=x4r;
+if serifs: top y1=h+min(oo,serif_drop); bot y4=-min(oo,serif_drop);
+else: top y1=h; bot y4=0; fi
+pos0(stem,0); pos0'(stem',0); x0=x3; x0'=x4; y0=y0';
+penpos2'(stem-fine,-180); z2'=z2; y3=y1; y2=.5bar_height;
+penpos5(max(eps,light_vair-fine),-90); penpos6(thin_join-fine,0);
+y6=y0=2/3bar_height;
+filldraw stroke z1e--z2e;  % left stem
+filldraw stroke z3e..z0e--z0'e..z4e;  % right stem
+pickup fine.nib; bot y5r=-oo; x5l=.5w-.25u; lft x6l=tiny.lft x0l;
+(x,y5r)=whatever[z5l,z6l]; x5r:=max(x,.5[x5,x2'r]);
+filldraw stroke {{interim superness:=hein_super;
+  pulled_arc.e(2',5)}} & z5e{right}...{up}z6e;  % arc
+if serifs: sloped_serif.l(1,2,a,1/3,jut,serif_drop); % upper left serif
+ sloped_serif.l(3,0,b,1/3,jut,serif_drop); % upper right serif
+ sloped_serif.r(4,0',c,1/3,jut,min(oo,serif_drop)); fi % lower right serif
+penlabels(1,2,3,4,5); labels(6); endchar;
+
+cmchar "The letter v";
+beginchar("v",if serifs: 9.5u# else:9u# fi,x_height#,0);
+italcorr x_height#*slant+.25u#;
+adjust_fit(serif_fit# if monospace:+\\.5u#,.5u#+ else:,fi\\ serif_fit#);
+numeric left_stem,right_stem,outer_jut,alpha;
+left_stem=fudged.stem-stem_corr;
+right_stem=min(fudged.hair if hefty:-2stem_corr fi,left_stem);
+outer_jut=.75jut; x1l=w-x4r=l+letter_fit+outer_jut+.25u; y1=y4=h;
+x2-x1=x4-x3; x2l+apex_corr=x3l; y2=y3=-apex_oo;
+alpha=diag_ratio(2,right_stem,y1-y2,x4r-x1l-apex_corr);
+penpos1(alpha*left_stem,0); penpos2(alpha*left_stem,0);
+penpos3(alpha*right_stem,0); penpos4(alpha*right_stem,0);
+z0=whatever[z1r,z2r]=whatever[z3l,z4l];
+if y0>notch_cut: y0:=notch_cut;
+  fill z0+.5right{up}...{z4-z3}diag_end(3l,4l,1,1,4r,3r)
+    --diag_end(4r,3r,1,1,2l,1l)--diag_end(2l,1l,1,1,1r,2r){z2-z1}
+    ...{down}z0+.5left--cycle; % left and right diagonals
+else: fill z0--diag_end(0,4l,1,1,4r,3r)--diag_end(4r,3r,1,1,2l,1l)
+    --diag_end(2l,1l,1,1,1r,0)--cycle; fi % left and right diagonals
+if serifs: numeric inner_jut; pickup tiny.nib;
+ prime_points_inside(1,2); prime_points_inside(4,3);
+ if rt x1'r+jut+.5u+1<=lft x4'l-jut: inner_jut=jut;
+ else: rt x1'r+inner_jut+.5u+1=lft x4'l-inner_jut; fi
+ dish_serif(1',2,a,1/3,outer_jut,b,1/2,inner_jut);  % left serif
+ dish_serif(4',3,c,.6,inner_jut,d,1/2,outer_jut)(dark); fi  % right serif
+penlabels(0,1,2,3,4); endchar;
+
+cmchar "The letter w";
+beginchar("w",13u#,x_height#,0);
+italcorr x_height#*slant+.25u#;
+adjust_fit(serif_fit#,serif_fit#);
+numeric stem[],outer_jut,upper_notch,alpha,mid_corr;
+outer_jut=.7jut; x1l=w-x8r=l+letter_fit+outer_jut+.25u;
+stem1=fudged.stem-stem_corr;
+stem4=min(fudged.hair if hefty:-2stem_corr fi,stem1);
+stem2=if hefty:.1[vair,stem4] else: stem4 fi;
+stem3=max(stem2,stem1-3stem_corr);
+x2-x1=x4-x3=x6-x5=x8-x7; x2l+apex_corr=x3l; x6l+apex_corr=x7l;
+y1=y8=h; y2=y3=y6=y7=-apex_oo;
+y4=y5=if monospace: vround .6 fi\\ h; upper_notch=y4-notch_cut;
+mid_corr=if monospace or hefty:-.3apex_corr else: .5jut fi;
+alpha=diag_ratio(4,stem2-stem3+stem4,y1-y2,x8r-x1l+mid_corr-2apex_corr);
+penpos1(alpha*stem1,0); penpos2(alpha*stem1,0);
+penpos3(alpha*stem2,0); penpos4(alpha*stem2,0);
+penpos5(alpha*stem3,0); penpos6(alpha*stem3,0);
+penpos7(alpha*stem4,0); penpos8(alpha*stem4,0);
+x4l-x1l=floor(x4l-x1l+.5(x5r+mid_corr-x4r)); % |x5r| $\approx$ |x4r+mid_corr|
+z23=whatever[z1r,z2r]=whatever[z3l,z4l];
+z45=whatever[z3r,z4r]=whatever[z5l,z6l];
+z67=whatever[z5r,z6r]=whatever[z7l,z8l];
+fill diag_end(1l,2l,1,1,3r,4r){z4-z3}
+ ...if y45<upper_notch:(x45,upper_notch)+.5left{up}
+   --(x45,upper_notch)+.5right{down} else: z45&z45 fi
+ ...{z6-z5}diag_end(5l,6l,1,1,7r,8r)--diag_end(7r,8r,1,1,8l,7l){z7-z8}
+ ...if y67>notch_cut:(x67,notch_cut)+.5right{down}
+   --(x67,notch_cut)+.5left{up} else: z67&z67 fi
+ ...{z5-z6}special_diag_end(6,5,4,3){z3-z4}
+ ...if y23>notch_cut:(x23,notch_cut)+.5right{down}
+   --(x23,notch_cut)+.5left{up} else: z23&z23 fi
+ ...{z1-z2}diag_end(2r,1r,1,1,1l,2l)--cycle;  % diagonals
+if serifs: numeric inner_jut[]; pickup tiny.nib;
+ prime_points_inside(1,2); prime_points_inside(5,6); prime_points_inside(8,7);
+ if monospace: inner_jut1=inner_jut4=1.5jut;
+ elseif hefty: inner_jut1=inner_jut4=jut;
+ else: fill diag_end(6r,5r,1,1,5l,6l)--.9[z5l,z6l]
+   ..{z5-z6}.1[z5r,z6r]--cycle; % middle stem
+  inner_jut2=.7inner_jut1; inner_jut4=1.1inner_jut3;
+  if rt x1'r+jut+.5u+1<=lft x5'l-.7jut: inner_jut1=jut;
+  else: rt x1'r+inner_jut1+.5u+1=lft x5'l-inner_jut2; fi
+  if rt x5'r+jut+.5u+1<=lft x8'l-1.1jut: inner_jut3=jut;
+  else: rt x5'r+inner_jut3+.5u+1=lft x8'l-inner_jut4; fi
+  dish_serif(5',6,e,1/3,inner_jut2,f,1/2,inner_jut3); fi  % middle serif
+ dish_serif(1',2,a,1/3,outer_jut,b,1/2,inner_jut1);  % left serif
+ dish_serif(8',7,c,.6,inner_jut4,d,1/2,outer_jut)(dark); fi  % right serif
+penlabels(0,1,2,3,4,5,6,7,8,23,45,67); endchar;
+
+cmchar "The letter x";
+beginchar("x",if serifs:9.5u# else:9u# fi,x_height#,0);
+italcorr x_height#*slant-.05u#;
+adjust_fit(serif_fit# if monospace:+\\.5u#,.5u#+ else:,fi\\ serif_fit#);
+numeric stem[],outer_jut,xjut,alpha[];
+stem1=fudged.stem-4stem_corr; stem2=min(fudged.hair,stem1);
+outer_jut=.75jut; xjut= if serifs: (stem1-stem2)/4 else: 0 fi;
+x1l=l+letter_fit+.1u+outer_jut; x2r=r-letter_fit-.3u-outer_jut-xjut;
+x3l=l+letter_fit+outer_jut+xjut; x4r=r-letter_fit-outer_jut;
+y1=y2=h; y3=y4=0;
+alpha1=diag_ratio(1,stem1,h,x4r-x1l);
+alpha2=diag_ratio(1,stem2,h,x2r-x3l);
+penpos1(alpha1*stem1,0); penpos2(alpha2*stem2,0);
+penpos3(alpha2*stem2,0); penpos4(alpha1*stem1,0);
+if hefty: z0=whatever[z1,z4]=whatever[z2,z3];
+ x12=x34=x0; y13=y24=y0;
+ z12=whatever[z2l,z3l]; z13=whatever[z2l,z3l];
+ z24=whatever[z2r,z3r]; z34=whatever[z2r,z3r];
+ forsuffixes $=13,24,34: z$'=.2[z$,z0]; endfor
+ fill diag_end(12,1r,.5,1,1l,13')--z13'--diag_end(13',3l,1,.5,3r,34')--z34'
+  --diag_end(34',4l,.5,1,4r,24')--z24'
+  --diag_end(24',2r,1,.5,2l,12)--z12--cycle; % diagonals
+else: fill diag_end(4r,1r,.5,1,1l,4l)
+  --diag_end(1l,4l,.5,1,4r,1r)--cycle; % left diagonal
+ fill diag_end(2l,3l,.5,1,3r,2r)
+  --diag_end(3r,2r,.5,1,2l,3l)--cycle; fi  % right diagonal
+if serifs: numeric inner_jut[]; pickup tiny.nib;
+ prime_points_inside(1,4); prime_points_inside(2,3);
+ prime_points_inside(3,2); prime_points_inside(4,1);
+ if rt x1'r+jut+.5u+1<=lft x2'l-jut-xjut: inner_jut1=jut;
+ else: rt x1'r+inner_jut1+.5u+1=lft x2'l-inner_jut1-xjut; fi
+ if rt x3'r+jut+.5u+1<=lft x4'l-jut-xjut: inner_jut2=jut;
+ else: rt x3'r+inner_jut2+.5u+1=lft x4'l-inner_jut2-xjut; fi
+ dish_serif(1',4,a,1/3,outer_jut,b,2/3,inner_jut1);  % upper left serif
+ dish_serif(4',1,c,2/3,inner_jut2,d,1/3,outer_jut);  % lower right serif
+ dish_serif(2',3,e,2/3,inner_jut1+xjut,
+  f,1/2,outer_jut+xjut)(dark);  % upper right serif
+ dish_serif(3',2,g,1/2,outer_jut+xjut,
+  h,2/3,inner_jut2+xjut)(dark); fi  % lower left serif
+penlabels(0,1,2,3,4,12,13,24,34); endchar;
+
+cmchar "The letter y";
+beginchar("y",if serifs:9.5u# else:9u# fi,x_height#,desc_depth#);
+italcorr x_height#*slant+.25u#;
+adjust_fit(serif_fit# if monospace:+\\.5u#,.5u#+ else:,fi\\ serif_fit#);
+numeric left_stem,right_stem,bot_stem,bot_vair,outer_jut;
+left_stem=fudged.stem-stem_corr;
+right_stem=fudged.hair if hefty:-2stem_corr fi;
+bot_stem=fudged.hair if hefty:-8stem_corr fi;
+bot_vair=Vround(if serifs: vair else:.5[vair,bot_stem] fi);
+outer_jut=.75jut;
+x1l=w-x4r=l+letter_fit+outer_jut+.25u; y1=y4r=h; y2=y3=0; x2l=x3l;
+numeric alpha,alpha[]; x9=3u; y9=bot_vair-d-oo;
+alpha1=diag_ratio(2,bot_stem,y1-y3,x4r-x1l-apex_corr);
+alpha2=diag_ratio(1,bot_stem,y1-y9,x4r-x9);
+if alpha1<alpha2: x2l-x1l=x4r-x3r+apex_corr; alpha=alpha1;
+else: alpha=alpha2; z3l=whatever[z9,z4r-(alpha*bot_stem,0)]; fi
+penpos3(alpha*bot_stem,0); penpos4(alpha*right_stem,0);
+alpha3=(y1++(x2l-x1l))/y1;
+penpos1(alpha3*left_stem,0); penpos2(alpha3*left_stem,0);
+z0=whatever[z1r,z2r]=z4l+whatever*(z3r-z4r);
+if y0>notch_cut: y0:=notch_cut;
+  fill z0+.5right{up}...{z4r-z3r}diag_end(0,4l,1,1,4r,3r)
+    --z3r--z2l--diag_end(2l,1l,1,1,1r,2r){z2-z1}
+    ...{down}z0+.5left--cycle; % left and right diagonals
+else: fill z0--diag_end(0,4l,1,1,4r,3r)--z3r--z2l
+    --diag_end(2l,1l,1,1,1r,0)--cycle; fi % left and right diagonals
+penpos5(alpha*bot_stem,0); z5r=whatever[z3r,z4r]; y5-.5vair=-.5d;
+if serifs: numeric light_bulb; light_bulb=hround 7/8[hair,flare]; clearpen;
+ penpos6(vair,-90); penpos7(hair,-180); penpos8(light_bulb,-180);
+ x6=2u; y6r=-d-oo; y8-.5light_bulb=-.85d; x8r=hround .35u;
+ fill stroke z3e---z5e...{left}z6e; bulb(6,7,8);  % arc and bulb
+ numeric inner_jut; pickup tiny.nib;
+ prime_points_inside(1,2); prime_points_inside(4,3);
+ if rt x1'r+jut+.5u+1<=lft x4'l-jut: inner_jut=jut;
+ else: rt x1'r+inner_jut+.5u+1=lft x4'l-inner_jut; fi
+ dish_serif(1',2,a,1/3,outer_jut,b,1/2,inner_jut);  % left serif
+ dish_serif(4',3,c,.6,inner_jut,d,1/2,outer_jut)(dark);  % right serif
+else: penpos6(bot_vair,-90); x6=2.5u; y6r=-d-oo;
+ fill stroke z3e---z5e...{left}z6e;  % arc
+ pickup fine.nib; pos6'(bot_vair,-90); z6'=z6;
+ pos7(2/3[bot_vair,flare],-85);
+ lft x7l=hround u; bot y7r=vround-.96d-oo; y7l:=good.y y7l;
+ filldraw stroke term.e(6',7,left,1,4); fi % arc and terminal
+penlabels(0,1,2,3,4,5,6,7,8,9); endchar;
+
+cmchar "The letter z";
+beginchar("z",8u#,x_height#,0);
+italcorr x_height#*slant-.5serif_fit#-.3u#;
+adjust_fit(0,.5serif_fit#);
+numeric arm_thickness[],z_stem;
+if hefty: arm_thickness1=Vround(vair-vair_corr); arm_thickness2=vair;
+ z_stem=.6[vair,stem];
+else: arm_thickness1=vair; arm_thickness2=vair'; z_stem=.9[vair,stem]; fi
+pickup tiny.nib; rt x1r=rt x2r=hround(w-.8u); lft x3l=lft x4l=hround .5u;
+top y1=h; y2=min(y1,h-2/3arm_thickness1);
+bot y4=0; y3=max(y4,2/3arm_thickness2);
+numeric alpha; alpha=diag_ratio(1,z_stem-tiny,y2-y3,x2r-x3l-slant*(y2-y3));
+penpos1(alpha*(z_stem-tiny),0); penpos2(alpha*(z_stem-tiny),0);
+penpos3(alpha*(z_stem-tiny),0); penpos4(alpha*(z_stem-tiny),0);
+pair delta; delta=penoffset z3-z2 of currentpen;
+fill top lft z1l--z2l+delta---z3l+delta..lft z3l---lft z4l..bot z4l
+ ---bot rt z4r--z3r-delta---z2r-delta..rt z2r---rt z1r..top z1r
+ ---cycle;  % diagonal
+pickup crisp.nib; pos5(arm_thickness1,90); pos6(hair,180);
+top y5r=h; x5=x1; lft x6r=hround .75u; y6=good.y(y5l-beak/1.4)-eps;
+arm(5,6,a,beak_darkness,-.4beak_jut);  % upper arm and beak
+pos7(arm_thickness2,-90); pos8(hair,0);
+bot y7r=0; x7=x4; rt x8r=hround(w-.75u); y8=good.y(y7l+beak/1.2)+eps;
+arm(7,8,b,beak_darkness,.6beak_jut);  % lower arm and beak
+penlabels(1,2,3,4,5,6,7,8); endchar;
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oromlig.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oromlig.mf
new file mode 100644
index 00000000000..fff520a6b05
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oromlig.mf
@@ -0,0 +1,168 @@
+% THIS IS THE OLD LATIN SOURCE FILE oromlig.mf BY T. TERASHITA.
+% IT MUST NOT BE MODIFIED IN ANY WAY UNLESS THE FILE NAME IS CHANGED!
+
+% Old Latin ligatures part 1 (part 2 is oromligs.mf)
+% based on romlig.mf by D E Knuth.
+% This file describes five roman ligatures that begin with `f'
+% and puts them in code positions \0013--\0017.
+
+numeric itc#; % modified italic correction on `f' and `ff'
+itc#=if serifs: max(0,flare#-.25u#) else: 1.25u# fi;
+
+ligtable "f": "i"=:oct"014", "f"=:oct"013", "l"=:oct"015",
+ "'" kern itc#, "?" kern itc#, "!" kern itc#, ")" kern itc#, "]" kern itc#;
+ligtable oct"013": "i"=:oct"016", "l"=:oct"017",
+ "'" kern itc#, "?" kern itc#, "!" kern itc#, ")" kern itc#, "]" kern itc#;
+
+cmchar "The ligature ff";
+beginchar(oct"013",10.5u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(0,0);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-3u+.5stem');
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); pos12(bulb_diam,0);
+ rt x2r=hround(rt x11r-stem_corr); lft x12l=hround(w-.75u+.5);
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 6.25u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(w+.75u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,1.25jut); % right stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=hround(w-1/3u);
+if hefty: pos3'(bar,90); x3'-x1=x4-x11; y3'=y3;
+ pos4'(bar,90); x4'=x11; y4'=y4;
+ filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+else: filldraw stroke z3e--z4e; fi  % bar
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature fi";
+beginchar(oct"014",10u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-2.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x12r;
+ y2+.5bulb_diam=.8[x_height,h+oo]; top y11=x_height+min(oo,serif_drop);
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(6/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u;
+ pickup tiny.nib; pos13(bulb_diam,0); pos14(bulb_diam,90);
+ x13=x11-.5; top y14r=min(10/7x_height+.5bulb_diam,h)+1; top y11=x_height;
+ if bot y14l-x_height<tiny: y14l:=min(y14r-eps,y11+2tiny); fi
+ x13=x14; y13=.5[y14l,y14r]; dot(13,14);  % dot
+fi;  % this is the ligature we're drawing
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup tiny.nib; filldraw stroke z11e--z12e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x11;  % bar will overlap upper right serif
+ sloped_serif.l(11,12,d,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(12,11,e,1/3,inner_jut,f,1/3,jut);  % lower right serif
+else: rt x4= hround 5.3u; fi
+pickup crisp.nib; filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4,11,12,13,14); endchar;
+
+cmchar "The ligature fl";
+beginchar(oct"015",10u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-2.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0; top y11=h;
+filldraw stroke z11e--z12e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ y2+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(11,12,d,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u; fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x11;
+ dish_serif(12,11,e,1/3,inner_jut,f,1/3,jut);  % lower right serif
+else: rt x4= hround 5.3u; fi
+pickup crisp.nib; filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature ffi";
+beginchar(oct"016",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u);
+ pickup tiny.nib; pos23(bulb_diam,0); pos24(bulb_diam,90);
+ x23=x21-.5; top y24r=min(10/7x_height+.5bulb_diam,h)+1; top y21=x_height;
+ if bot y24l-x_height<tiny: y24l:=min(y24r-eps,y21+2tiny); fi
+ x23=x24; y23=.5[y24l,y24r]; dot(23,24); fi  % dot
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup tiny.nib; filldraw stroke z21e--z22e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+ sloped_serif.l(21,22,g,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+if hefty: pos3'(bar,90); x3'-x1=x4-x11; y3'=y3;
+ pos4'(bar,90); x4'=x11; y4'=y4;
+ filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+else: filldraw stroke z3e--z4e; fi  % bar
+penlabels(1,2,3,4,11,12,21,22,23,24); endchar;
+
+cmchar "The ligature ffl";
+beginchar(oct"017",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0; top y21=h;
+filldraw stroke z21e--z22e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r-stem_corr;
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(21,22,g,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+ pickup crisp.nib; x4=x21;
+else: rt x4=hround(.5w+2.8u); fi
+if hefty: pos3'(bar,90); x3'-x1=x4-x11; y3'=y3;
+ pos4'(bar,90); x4'=x11; y4'=y4;
+ filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+else: filldraw stroke z3e--z4e; fi  % bar
+penlabels(1,2,3,4,11,12,21,22); endchar;
diff --git a/Master/texmf-dist/fonts/source/public/oldlatin/oromligs.mf b/Master/texmf-dist/fonts/source/public/oldlatin/oromligs.mf
new file mode 100644
index 00000000000..10c95c08644
--- /dev/null
+++ b/Master/texmf-dist/fonts/source/public/oldlatin/oromligs.mf
@@ -0,0 +1,773 @@
+% Old Latin ligatures part 2 oromligs.mf (part 1 is oromlig.mf)
+% This file describes five roman ligatures
+% that begin with ``langes Es'' or end with ``t''
+% and puts them in code positions \0213--.
+
+% This file should be read just after ``oromlig.mf'',
+% because the next two lines are in oromlig.mf:
+% > numeric itc#; % modified italic correction on `f' and `ff'
+% > itc#=if serifs: max(0,flare#-.25u#) else: 1.25u# fi;
+
+ligtable "s": "i"=:oct"214", "f"=:oct"213", "l"=:oct"215",
+ "s"=:oct"253", ":"=:oct"363", "t"=:oct"334",
+ "'" kern itc#, "?" kern itc#, "!" kern itc#, ")" kern itc#, "]" kern itc#;
+ligtable oct"213": "i"=:oct"216", "l"=:oct"217",
+% "t"=:oct"336", % ligature of sft, which should not be used in old text
+ "'" kern itc#, "?" kern itc#, "!" kern itc#, ")" kern itc#, "]" kern itc#;
+ligtable oct"253": "i"=:oct"256", "l"=:oct"257", "t"=:oct"376",
+ "'" kern itc#, "?" kern itc#, "!" kern itc#, ")" kern itc#, "]" kern itc#;
+
+% Combinations "langes Es" and "f"
+
+cmchar "The ligature langes sf";
+beginchar(oct"213",10.5u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(0,0);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-3u+.5stem');
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); pos12(bulb_diam,0);
+ rt x2r=hround(rt x11r-stem_corr); lft x12l=hround(w-.75u+.5);
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 6.25u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(w+.75u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,1.25jut); % right stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=hround(w-1/3u);
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature langes si";
+beginchar(oct"214",10u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-2.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x12r;
+ y2+.5bulb_diam=.8[x_height,h+oo]; top y11=x_height+min(oo,serif_drop);
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(6/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u;
+ pickup tiny.nib; pos13(bulb_diam,0); pos14(bulb_diam,90);
+ x13=x11-.5; top y14r=min(2x_height,h+1); top y11=x_height;
+ if bot y14l-x_height<tiny: y14l:=min(y14r-eps,y11+2tiny); fi
+ x13=x14; y13=.5[y14l,y14r]; dot(13,14);  % dot
+fi;  % this is the ligature we're drawing
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup tiny.nib; filldraw stroke z11e--z12e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x1;
+ sloped_serif.l(11,12,d,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(12,11,e,1/3,inner_jut,f,1/3,jut);  % lower right serif
+else: rt x4=x1; fi
+pickup crisp.nib; filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4,11,12,13,14); endchar;
+
+cmchar "The ligature langes sl";
+beginchar(oct"215",10u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-2.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0; top y11=h;
+filldraw stroke z11e--z12e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ y2+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(11,12,d,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u; fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x1;
+ dish_serif(12,11,e,1/3,inner_jut,f,1/3,jut);  % lower right serif
+else: rt x4=x1; fi
+pickup crisp.nib; filldraw stroke z3e--z4e;  % bar
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature langes sfi";
+beginchar(oct"216",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u);
+ pickup tiny.nib; pos23(bulb_diam,0); pos24(bulb_diam,90);
+ x23=x21-.5; top y24r=min(10/7x_height+.5bulb_diam,h)+1; top y21=x_height;
+ if bot y24l-x_height<tiny: y24l:=min(y24r-eps,y21+2tiny); fi
+ x23=x24; y23=.5[y24l,y24r]; dot(23,24); fi  % dot
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup tiny.nib; filldraw stroke z21e--z22e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+ sloped_serif.l(21,22,g,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12,21,22,23,24); endchar;
+
+cmchar "The ligature langes sfl";
+beginchar(oct"217",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0; top y21=h;
+filldraw stroke z21e--z22e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r-stem_corr;
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(21,22,g,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+ pickup crisp.nib; x4=x21;
+else: rt x4=hround(.5w+2.8u); fi
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12,21,22); endchar;
+
+% Combinations "f" and "langes Es"
+
+cmchar "The ligature langes fs";
+beginchar(oct"233",10.5u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(0,0);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-3u+.5stem');
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); pos12(bulb_diam,0);
+ rt x2r=hround(rt x11r-stem_corr); lft x12l=hround(w-.75u+.5);
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 6.25u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(w+.75u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,1.25jut); % right stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=hround(w-1/3u);
+pos4'(bar,90); x4'=x11; y4'=y4;
+filldraw stroke z3e--z4'e; % bar
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature langes fsi";
+beginchar(oct"236",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u);
+ pickup tiny.nib; pos23(bulb_diam,0); pos24(bulb_diam,90);
+ x23=x21-.5; top y24r=min(10/7x_height+.5bulb_diam,h)+1; top y21=x_height;
+ if bot y24l-x_height<tiny: y24l:=min(y24r-eps,y21+2tiny); fi
+ x23=x24; y23=.5[y24l,y24r]; dot(23,24); fi  % dot
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup tiny.nib; filldraw stroke z21e--z22e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+ sloped_serif.l(21,22,g,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+pos4'(bar,90); x4'=x11; y4'=y4;
+filldraw stroke z3e--z4'e; % bar
+penlabels(1,2,3,4,11,12,21,22,23,24); endchar;
+
+cmchar "The ligature langes fsl";
+beginchar(oct"237",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0; top y21=h;
+filldraw stroke z21e--z22e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r-stem_corr;
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(21,22,g,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+ pickup crisp.nib; x4=x21;
+else: rt x4=hround(.5w+2.8u); fi
+pos4'(bar,90); x4'=x11; y4'=y4;
+filldraw stroke z3e--z4'e; % bar
+penlabels(1,2,3,4,11,12,21,22); endchar;
+
+% Combinations "langes Es" and "langes Es"
+
+cmchar "The ligature lange ss";
+beginchar(oct"253",10.5u#+2letter_fit#,asc_height#,0);
+italcorr asc_height#*slant+if serifs:flare#-.25u# else: 1.25u# fi;
+adjust_fit(0,0);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-3u+.5stem');
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); pos12(bulb_diam,0);
+ rt x2r=hround(rt x11r-stem_corr); lft x12l=hround(w-.75u+.5);
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 6.25u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(w+.75u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,1.25jut); % right stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+rt x4=x11;
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12); endchar;
+
+cmchar "The ligature lange ssi";
+beginchar(oct"256",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5if serifs:stem# else:dot_size# fi-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u);
+ pickup tiny.nib; pos23(bulb_diam,0); pos24(bulb_diam,90);
+ x23=x21-.5; top y24r=min(10/7x_height+.5bulb_diam,h)+1; top y21=x_height;
+ if bot y24l-x_height<tiny: y24l:=min(y24r-eps,y21+2tiny); fi
+ x23=x24; y23=.5[y24l,y24r]; dot(23,24); fi  % dot
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup tiny.nib; filldraw stroke z21e--z22e;  % right stem
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x11;  % bar will overlap upper right serif
+ sloped_serif.l(21,22,g,1/3,jut,min(oo,serif_drop));  % upper right serif
+ dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+else: rt x4=x11; fi
+pickup crisp.nib;
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12,21,22,23,24); endchar;
+
+cmchar "The ligature lange ssl";
+beginchar(oct"257",15u#+4letter_fit#,asc_height#,0);
+italcorr asc_height#*slant-serif_fit#+.5stem#-2u#;
+adjust_fit(0,serif_fit#);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); lft x11l=hround(.5w-.5stem');
+pos21(stem',0); rt x21r=hround(w-2.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0; top y21=h;
+filldraw stroke z21e--z22e;  % right stem
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround .8[stem,flare];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(bulb_diam,0); x12r=x21r-stem_corr;
+ y2+.5bulb_diam=.85[x_height,h+oo]; y12+.5bulb_diam=.9[x_height,h+oo];
+ sloped_serif.l(21,22,g,1/3,eps,max(serif_drop,oo)); % erase excess at top
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(5/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: dish_serif(22,21,h,1/3,inner_jut,i,1/3,jut);  % lower right serif
+ pickup crisp.nib; x4=x11;
+else: rt x4=x11; fi
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+penlabels(1,2,3,4,11,12,21,22); endchar;
+
+% Combinations "f" and "t"
+
+cmchar "The ligature ft";
+beginchar(oct"314",12u#+2letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-4.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(hround(shaved_stem-stem_corr),0); x2=x12;
+ y2+.5bulb_diam=.8[x_height,h+oo]; top y11=x_height+min(oo,serif_drop);
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(6/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u;
+fi; % this is the ligature we're drawing
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x11; % bar will overlap upper right serif
+else: x4=x11; fi
+pickup crisp.nib; filldraw stroke z3e--z4e; % bar
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos22(shaved_stem,180);pos23(shaved_stem,180);
+x22=x23=x11;
+y22=y28; y23=max(.5bar_height,2vair);
+pickup crisp.nib; pos28(bar,90);
+rt x28=hround(w-1.3u); top y28r=x_height; x27-x22=x3-x1; y27l=y28l;
+pos27(bar,90);
+filldraw stroke z27e--z28e; % crossbar
+pickup tiny.nib; pos21(hround(shaved_stem-stem_corr),0);
+rt x21r=fine.rt x22l; top if serifs: y21=y2 else: y21=9/7x_height fi;
+penpos22'(x21r-x21l,0); x22'=x21; y22'=y22;
+filldraw stroke z21e--z22'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos24(vair',-90); bot y24r=-oo; rt x25r=hround(w-u);
+if serifs: pos25(hair,0); y25=y23; x24l=.5[x23l,x25l];
+ (x,y24r)=whatever[z24l,z25l]; x24r:=max(x,.5[x23r,x24]);
+ filldraw stroke z22e..super_arc.e(23,24)...{up}z25e; % stem and hook
+ pickup crisp.nib; pos26(hair,0); pos25'(hair,0);
+ x26=x25=x25'; top y26=max(vround .75bar_height,top y25); y25=y25';
+ filldraw stroke z25'e--z26e; % terminal
+else: pos25(vair,-75); top y25l=vround .2[top y24l,bar_height];
+ x25l:=good.x x25l; x24l=1/3[x23l,x25l]; x24r:=1/3[x23r,x25r];
+ y23l:=y23l+.2vair;
+ filldraw stroke z22e..super_arc.e(23,24); % stem and hook
+ path p; p=stroke z24e{right}..tension .9 and atleast 1..z25e; % terminal
+ if (xpart(z25l-precontrol 1 of p)<0) or (xpart(z25r-postcontrol 2 of p)<0):
+  filldraw stroke z24e{right}...{up}z25e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,13,14,21,22,23,24,25,26,27,28); endchar;
+
+cmchar "The ligature fft";
+beginchar(oct"316",17u#+4letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); x11=7.5u;
+pos21(stem',0); rt x21r=hround(w-4.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(hround(shaved_stem-stem_corr),0); x12=x21;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+if hefty: pos3'(bar,90); x3'-x1=.8(x2-x1); y3'=y3;
+ pos4'(bar,90); x4'=x11; y4'=y4;
+ filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+else: filldraw stroke z3e--z4e; fi  % bar
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos32(shaved_stem,180);pos33(shaved_stem,180);
+x32=x33=x21;
+y32=y38; y33=max(.5bar_height,2vair);
+pickup crisp.nib; pos38(bar,90);
+rt x38=hround(w-1.3u); top y38r=x_height; x37-x32=x3-x1; y37l=y38l;
+pos37(bar,90);
+filldraw stroke z37e--z38e; % crossbar
+pickup tiny.nib; pos31(hround(shaved_stem-stem_corr),0);
+rt x31r=fine.rt x32l; top if serifs: y31=y2 else: y31=9/7x_height fi;
+penpos32'(x31r-x31l,0); x32'=x31; y32'=y32;
+filldraw stroke z31e--z32'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos34(vair',-90); bot y34r=-oo; rt x35r=hround(w-u);
+if serifs: pos35(hair,0); y35=y33; x34l=.5[x33l,x35l];
+ (x,y34r)=whatever[z34l,z35l]; x34r:=max(x,.5[x33r,x34]);
+ filldraw stroke z32e..super_arc.e(33,34)...{up}z35e; % stem and hook
+ pickup crisp.nib; pos36(hair,0); pos35'(hair,0);
+ x36=x35=x35'; top y36=max(vround .75bar_height,top y35); y35=y35';
+ filldraw stroke z35'e--z36e; % terminal
+else: pos35(vair,-75); top y35l=vround .2[top y34l,bar_height];
+ x35l:=good.x x35l; x34l=1/3[x33l,x35l]; x34r:=1/3[x33r,x35r];
+ y33l:=y33l+.2vair;
+ filldraw stroke z32e..super_arc.e(33,34); % stem and hook
+ path p; p=stroke z34e{right}..tension .9 and atleast 1..z35e; % terminal
+ if (xpart(z35l-precontrol 1 of p)<0) or (xpart(z35r-postcontrol 2 of p)<0):
+  filldraw stroke z34e{right}...{up}z35e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,21,22,23,24,31,32,33,34,35,36,37,38); endchar;
+
+% Combinations "langes Es" and ("t" or "ft")
+
+cmchar "The ligature langes st";
+beginchar(oct"334",12u#+2letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); rt x11r=hround(w-4.5u+.5stem');
+pos12(stem',0); x11=x12; bot y12=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(hround(shaved_stem-stem_corr),0); x2=x12;
+ y2+.5bulb_diam=.8[x_height,h+oo]; top y11=x_height+min(oo,serif_drop);
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(6/7[vair,flare],90); top y2r=h; rt x2=hround 5.3u;
+fi; % this is the ligature we're drawing
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround .5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x1; % bar will overlap upper right serif
+else: x4=x1; fi
+pickup crisp.nib; filldraw stroke z3e--z4e; % bar
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos22(shaved_stem,180);pos23(shaved_stem,180);
+x22=x23=x11;
+y22=y28; y23=max(.5bar_height,2vair);
+pickup crisp.nib; pos28(bar,90);
+rt x28=hround(w-1.3u); top y28r=x_height; x27-x22=x3-x1; y27l=y28l;
+pos27(bar,90);
+filldraw stroke z27e--z28e; % crossbar
+pickup tiny.nib; pos21(hround(shaved_stem-stem_corr),0);
+rt x21r=fine.rt x22l; top if serifs: y21=y2 else: y21=9/7x_height fi;
+penpos22'(x21r-x21l,0); x22'=x21; y22'=y22;
+filldraw stroke z21e--z22'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos24(vair',-90); bot y24r=-oo; rt x25r=hround(w-u);
+if serifs: pos25(hair,0); y25=y23; x24l=.5[x23l,x25l];
+ (x,y24r)=whatever[z24l,z25l]; x24r:=max(x,.5[x23r,x24]);
+ filldraw stroke z22e..super_arc.e(23,24)...{up}z25e; % stem and hook
+ pickup crisp.nib; pos26(hair,0); pos25'(hair,0);
+ x26=x25=x25'; top y26=max(vround .75bar_height,top y25); y25=y25';
+ filldraw stroke z25'e--z26e; % terminal
+else: pos25(vair,-75); top y25l=vround .2[top y24l,bar_height];
+ x25l:=good.x x25l; x24l=1/3[x23l,x25l]; x24r:=1/3[x23r,x25r];
+ y23l:=y23l+.2vair;
+ filldraw stroke z22e..super_arc.e(23,24); % stem and hook
+ path p; p=stroke z24e{right}..tension .9 and atleast 1..z25e; % terminal
+ if (xpart(z25l-precontrol 1 of p)<0) or (xpart(z25r-postcontrol 2 of p)<0):
+  filldraw stroke z24e{right}...{up}z25e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,13,14,21,22,23,24,25,26,27,28); endchar;
+
+cmchar "The ligature langes sft";
+beginchar(oct"336",17u#+4letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); x11=7.5u;
+pos21(stem',0); rt x21r=hround(w-4.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(hround(shaved_stem-stem_corr),0); x12=x21;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e;  % bars
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos32(shaved_stem,180);pos33(shaved_stem,180);
+x32=x33=x21;
+y32=y38; y33=max(.5bar_height,2vair);
+pickup crisp.nib; pos38(bar,90);
+rt x38=hround(w-1.3u); top y38r=x_height; x37-x32=x3-x1; y37l=y38l;
+pos37(bar,90);
+filldraw stroke z37e--z38e; % crossbar
+pickup tiny.nib; pos31(hround(shaved_stem-stem_corr),0);
+rt x31r=fine.rt x32l; top if serifs: y31=y2 else: y31=9/7x_height fi;
+penpos32'(x31r-x31l,0); x32'=x31; y32'=y32;
+filldraw stroke z31e--z32'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos34(vair',-90); bot y34r=-oo; rt x35r=hround(w-u);
+if serifs: pos35(hair,0); y35=y33; x34l=.5[x33l,x35l];
+ (x,y34r)=whatever[z34l,z35l]; x34r:=max(x,.5[x33r,x34]);
+ filldraw stroke z32e..super_arc.e(33,34)...{up}z35e; % stem and hook
+ pickup crisp.nib; pos36(hair,0); pos35'(hair,0);
+ x36=x35=x35'; top y36=max(vround .75bar_height,top y35); y35=y35';
+ filldraw stroke z35'e--z36e; % terminal
+else: pos35(vair,-75); top y35l=vround .2[top y34l,bar_height];
+ x35l:=good.x x35l; x34l=1/3[x33l,x35l]; x34r:=1/3[x33r,x35r];
+ y33l:=y33l+.2vair;
+ filldraw stroke z32e..super_arc.e(33,34); % stem and hook
+ path p; p=stroke z34e{right}..tension .9 and atleast 1..z35e; % terminal
+ if (xpart(z35l-precontrol 1 of p)<0) or (xpart(z35r-postcontrol 2 of p)<0):
+  filldraw stroke z34e{right}...{up}z35e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,21,22,23,24,31,32,33,34,35,36,37,38); endchar;
+
+% Variations "fft"
+
+cmchar "The ligature langes fst";
+beginchar(oct"356",17u#+4letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); x11=7.5u;
+pos21(stem',0); rt x21r=hround(w-4.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(hround(shaved_stem-stem_corr),0); x12=x21;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x21;  % bar will overlap upper right serif
+else: rt x4=hround(.5w+2.8u); fi
+pickup crisp.nib;
+pos4'(bar,90); x4'=x11; y4'=y4;
+filldraw stroke z3e--z4'e; % bar
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos32(shaved_stem,180);pos33(shaved_stem,180);
+x32=x33=x21;
+y32=y38; y33=max(.5bar_height,2vair);
+pickup crisp.nib; pos38(bar,90);
+rt x38=hround(w-1.3u); top y38r=x_height; x37-x32=x3-x1; y37l=y38l;
+pos37(bar,90);
+filldraw stroke z37e--z38e; % crossbar
+pickup tiny.nib; pos31(hround(shaved_stem-stem_corr),0);
+rt x31r=fine.rt x32l; top if serifs: y31=y2 else: y31=9/7x_height fi;
+penpos32'(x31r-x31l,0); x32'=x31; y32'=y32;
+filldraw stroke z31e--z32'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos34(vair',-90); bot y34r=-oo; rt x35r=hround(w-u);
+if serifs: pos35(hair,0); y35=y33; x34l=.5[x33l,x35l];
+ (x,y34r)=whatever[z34l,z35l]; x34r:=max(x,.5[x33r,x34]);
+ filldraw stroke z32e..super_arc.e(33,34)...{up}z35e; % stem and hook
+ pickup crisp.nib; pos36(hair,0); pos35'(hair,0);
+ x36=x35=x35'; top y36=max(vround .75bar_height,top y35); y35=y35';
+ filldraw stroke z35'e--z36e; % terminal
+else: pos35(vair,-75); top y35l=vround .2[top y34l,bar_height];
+ x35l:=good.x x35l; x34l=1/3[x33l,x35l]; x34r:=1/3[x33r,x35r];
+ y33l:=y33l+.2vair;
+ filldraw stroke z32e..super_arc.e(33,34); % stem and hook
+ path p; p=stroke z34e{right}..tension .9 and atleast 1..z35e; % terminal
+ if (xpart(z35l-precontrol 1 of p)<0) or (xpart(z35r-postcontrol 2 of p)<0):
+  filldraw stroke z34e{right}...{up}z35e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,21,22,23,24,31,32,33,34,35,36,37,38); endchar;
+
+cmchar "The ligature lange sst";
+beginchar(oct"376",17u#+4letter_fit#,asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+pickup tiny.nib; pos1(stem',0); lft x1l=hround(2.5u-.5stem');
+pos11(stem',0); x11=7.5u;
+pos21(stem',0); rt x21r=hround(w-4.5u+.5stem');
+pos22(stem',0); x21=x22; bot y22=0;
+pickup fine.nib; numeric bulb_diam, inner_jut;
+if serifs: bulb_diam=hround 1/4[.8[stem,flare],dot_size];
+ pos2(bulb_diam,0); x2r=x11r-stem_corr;
+ pos12(hround(shaved_stem-stem_corr),0); x12=x21;
+ top y21=x_height+min(oo,serif_drop);
+ y2+.5bulb_diam=.8[x_height,h+oo]; y12=y2;
+ if rt x1r+jut+.5u+2<=lft x11l-jut: inner_jut=jut;
+ else: rt x1r+inner_jut+.5u+2=lft x11l-inner_jut; fi
+else: bulb_diam=max(stem,dot_size);
+ pos2(5/7[vair,flare],90); top y2r=h; rt x2=hround 5.75u;
+ pos12(6/7[vair,flare],90); y12=y2; rt x12=hround(.5w+2.8u); fi
+f_stroke(1,2,a,b,c,jut,inner_jut); % left stem, arc, terminal, serif
+f_stroke(11,12,d,e,f,inner_jut,inner_jut); % middle ditto
+pickup crisp.nib; top y3r=top y4r=x_height; lft x3=hround.5u-1;
+pos3(bar,90); pos4(bar,90);
+if serifs: x4=x11;  % bar will overlap upper right serif
+else: rt x4=x11; fi
+pickup crisp.nib;
+pos3'(bar,90); x3'=x1; y3'=y3;
+pos4'(bar,90); x4'-x11=x3-x1; y4'=y4;
+filldraw stroke z3e--z3'e; filldraw stroke z4'e--z4e; % bars
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos32(shaved_stem,180);pos33(shaved_stem,180);
+x32=x33=x21;
+y32=y38; y33=max(.5bar_height,2vair);
+pickup crisp.nib; pos38(bar,90);
+rt x38=hround(w-1.3u); top y38r=x_height; x37-x32=x3-x1; y37l=y38l;
+pos37(bar,90);
+filldraw stroke z37e--z38e; % crossbar
+pickup tiny.nib; pos31(hround(shaved_stem-stem_corr),0);
+rt x31r=fine.rt x32l; top if serifs: y31=y2 else: y31=9/7x_height fi;
+penpos32'(x31r-x31l,0); x32'=x31; y32'=y32;
+filldraw stroke z31e--z32'e; % upper terminal
+pickup fine.nib; interim superness:=more_super;
+pos34(vair',-90); bot y34r=-oo; rt x35r=hround(w-u);
+if serifs: pos35(hair,0); y35=y33; x34l=.5[x33l,x35l];
+ (x,y34r)=whatever[z34l,z35l]; x34r:=max(x,.5[x33r,x34]);
+ filldraw stroke z32e..super_arc.e(33,34)...{up}z35e; % stem and hook
+ pickup crisp.nib; pos36(hair,0); pos35'(hair,0);
+ x36=x35=x35'; top y36=max(vround .75bar_height,top y35); y35=y35';
+ filldraw stroke z35'e--z36e; % terminal
+else: pos35(vair,-75); top y35l=vround .2[top y34l,bar_height];
+ x35l:=good.x x35l; x34l=1/3[x33l,x35l]; x34r:=1/3[x33r,x35r];
+ y33l:=y33l+.2vair;
+ filldraw stroke z32e..super_arc.e(33,34); % stem and hook
+ path p; p=stroke z34e{right}..tension .9 and atleast 1..z35e; % terminal
+ if (xpart(z35l-precontrol 1 of p)<0) or (xpart(z35r-postcontrol 2 of p)<0):
+  filldraw stroke z34e{right}...{up}z35e;
+ else: filldraw p; fi fi;
+penlabels(1,2,3,4,11,12,21,22,23,24,31,32,33,34,35,36,37,38); endchar;
+
+cmchar "The ligature ct";
+beginchar(oct"343",15u#+max(u#,.5stem#),asc_height#,0);
+italcorr x_height#*slant if serifs: -.9u# else: -.4u# fi;
+adjust_fit(0,if serifs: 0 else: -.5u# fi);
+numeric shaved_stem; shaved_stem=hround(stem if hefty:-\\2stem_corr fi);
+pickup fine.nib; pos2(vair',90); pos4(vair',270);
+x2=x4=.5(8u+u); top y2r=vround(x_height+1.5oo); bot y4r=-oo;
+pos3(curve,180); lft x3r=hround max(.6u,1.35u-.5curve); y3=.5x_height;
+if serifs: pos1(hair,0); pos0(flare,0);
+ y1=min(bar_height+.5flare+2vair'+2,.9[bar_height,x_height]-.5flare);
+ rt x1r=hround(8u-.7u); bulb(2,1,0); % bulb
+ pos5(hair,0); rt x5r=hround(8u-.5u);
+ y5=max(good.y(.5bar_height-.9),y4l+vair');
+ (x,y4l)=whatever[z4r,z5l]; x4l:=min(x,x4l+.5u);
+ filldraw stroke pulled_super_arc.e(2,3)(.7superpull)
+  & pulled_super_arc.e(3,4)(.5superpull)
+  ..tension .9 and 1..{x5-x4,5(y5-y4)}z5e; % arc and lower terminal
+else: pos1(4/7[vair',flare],80);
+ rt x1r=hround(8u-.6u); top y1r=vround .82[bar_height,top y2r];
+ filldraw stroke term.e(2,1,right,.8,4); % upper terminal
+ pos5(.6[vair',flare],275); rt x5r=hround(8u-.5u);
+ y5r=good.y(y5r+1/3bar_height-y5); y5l:=good.y y5l; x5l:=good.x x5l;
+ forsuffixes e=l,r: path p.e; p.e=z4e{right}..tension .9 and 1..z5e;
+  if angle direction 1 of p.e>75:
+   p.e:=z4e{right}..tension atleast.9 and 1..{dir 75}z5e; fi endfor
+ filldraw stroke pulled_super_arc.e(2,3)(.7superpull)
+  & pulled_super_arc.e(3,4)(.5superpull) & p.e; fi % arc and lower terminal
+pickup fine.nib; pos22(shaved_stem,180);pos23(shaved_stem,180);
+lft x22r=lft x23r=hround(9u+2.5u-.5shaved_stem);
+y22=y28; y23=max(.5bar_height,2vair);
+pickup crisp.nib; pos28(bar,90);
+rt x28=hround(w-1.3u); top y28r=x_height; lft x27=hround 9u+1/3u; y27l=y28l;
+if hefty: pos27(bar,90);
+ filldraw stroke z27e--z28e; % crossbar
+ pickup tiny.nib; pos21(hround(shaved_stem-stem_corr),0);
+ rt x21r=fine.rt x22l; top y21=9/7x_height;
+ penpos22'(x21r-x21l,0); x22'=x21; y22'=y22;
+ filldraw stroke z21e--z22'e; % upper terminal
+else: pos27(vair,90); pos21(hair,0);
+ rt x21r=fine.rt x22l; top y21=10/7x_height;
+ filldraw z21l{down}...{left}z27r--z27l--z28l
+  --z28r--(x21r,y28r)--z21r--cycle; fi % upper terminal and crossbar
+pickup fine.nib; interim superness:=more_super;
+pos24(vair',-90); bot y24r=-oo; rt x25r=hround(w-u);
+if serifs: pos25(hair,0); y25=y23; x24l=.5[x23l,x25l];
+ filldraw stroke z22e..super_arc.e(23,24)...{up}z25e; % stem and hool
+ pickup crisp.nib; pos26(hair,0); pos25'(hair,0);
+ x26=x25=x25'; top y26=max(vround .75bar_height,top y25); y25=y25';
+ filldraw stroke z25'e--z26e; % terminal
+else: pos25(vair,-75); top y25l=vround .2[top y24l,bar_height];
+ x25l:=good.x x25l; x24l=1/3[x23l,x25l]; x24r:=1/3[x23r,x25r]; y23l:=y23l+.2vair;
+ filldraw stroke z22e..super_arc.e(23,24); % stem and hook
+ path p; p=stroke z24e{right}..tension .9 and atleast 1..z25e; % terminal
+ if (xpart(z25l-precontrol 1 of p)<0) or (xpart(z25r-postcontrol 2 of p)<0):
+  filldraw stroke z24e{right}...{up}z25e;
+ else: filldraw p; fi fi;
+pickup tiny.nib;
+if hefty:
+ pos31(4/7[vair',flare],80); x31=x1; y31=y1;
+ pos32(hair,-90); x32=8.5u; y32=h;
+ pos33(hround(shaved_stem-stem_corr),-180); x33=x21; y33=y21;
+else:
+ pos31(2hair,0); x31l=x0l+.5fine; y31=y0;
+ pos32(hair,-90); x32=8.5u; y32=h;
+ pos33(hair,-180); x33=x21; y33=y21; fi;
+filldraw stroke z31e..z32e..{down}z33e;
+penlabels(0,1,2,3,4,5,21,22,23,24,25,26,27,28,31,32,33); endchar;