summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2014-06-30 22:33:28 +0000
committerKarl Berry <karl@freefriends.org>2014-06-30 22:33:28 +0000
commit53e69d1db92ec88a11052f0899d0d6d926a99ea3 (patch)
tree943014801778b094a8ef8e263b4e5a4ed66192ef /Master/texmf-dist/doc
parenta09f2d1368b9d0c8a5b07fed447fa7bb54895111 (diff)
endiagram (29jun14)
git-svn-id: svn://tug.org/texlive/trunk@34486 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc')
-rw-r--r--Master/texmf-dist/doc/latex/endiagram/README8
-rw-r--r--Master/texmf-dist/doc/latex/endiagram/endiagram_en.pdfbin675068 -> 637268 bytes
-rw-r--r--Master/texmf-dist/doc/latex/endiagram/endiagram_en.tex2189
3 files changed, 1126 insertions, 1071 deletions
diff --git a/Master/texmf-dist/doc/latex/endiagram/README b/Master/texmf-dist/doc/latex/endiagram/README
index cc0fe7d7243..b88d2ce55b3 100644
--- a/Master/texmf-dist/doc/latex/endiagram/README
+++ b/Master/texmf-dist/doc/latex/endiagram/README
@@ -1,9 +1,9 @@
--------------------------------------------------------------------------
-the ENdiagram package v0.1c
+the ENdiagram package v0.1d
easy creation of potential energy curve diagrams
-2013/04/18
+2014/06/28
--------------------------------------------------------------------------
Clemens Niederberger
Web: https://www.bitbucket.org/cgnieder/endiagram
@@ -12,7 +12,7 @@ E-Mail: contact@mychemistry.eu
If you have any ideas, questions, suggestions or bugs to report, please
feel free to contact me.
--------------------------------------------------------------------------
-Copyright 2012--2013 Clemens Niederberger
+Copyright 2012--2014 Clemens Niederberger
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either version 1.3
@@ -28,4 +28,4 @@ The Current Maintainer of this work is Clemens Niederberger.
This work consists of the files endiagram.sty, endiagram_en.tex,
README and the derived file endiagram_en.pdf.
--------------------------------------------------------------------------- \ No newline at end of file
+--------------------------------------------------------------------------
diff --git a/Master/texmf-dist/doc/latex/endiagram/endiagram_en.pdf b/Master/texmf-dist/doc/latex/endiagram/endiagram_en.pdf
index d731a0f3804..3b2c668c1ce 100644
--- a/Master/texmf-dist/doc/latex/endiagram/endiagram_en.pdf
+++ b/Master/texmf-dist/doc/latex/endiagram/endiagram_en.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/endiagram/endiagram_en.tex b/Master/texmf-dist/doc/latex/endiagram/endiagram_en.tex
index c268964c0db..74be547af91 100644
--- a/Master/texmf-dist/doc/latex/endiagram/endiagram_en.tex
+++ b/Master/texmf-dist/doc/latex/endiagram/endiagram_en.tex
@@ -15,7 +15,7 @@
% If you have any ideas, questions, suggestions or bugs to report, please
% feel free to contact me.
% --------------------------------------------------------------------------
-% Copyright 2012--2013 Clemens Niederberger
+% Copyright 2011--2013 Clemens Niederberger
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
@@ -32,56 +32,45 @@
% This work consists of the files endiagram.sty, endiagram_en.tex,
% README and the derived file endiagram_en.pdf.
% --------------------------------------------------------------------------
-% if you want to compile this documentation you'll need the document class
-% `cnpkgdoc' which you can get here:
-% https://bitbucket.org/cgnieder/cnpkgdoc/
-% the class is licensed LPPL 1.3 or later
-\documentclass[DIV10,toc=index,toc=bib]{cnpkgdoc}
-\docsetup{
- language = en ,
- title = ENdiagram ,
- subtitle = {Easy creation of potential energy curve diagrams.} ,
- name = ENdiagram ,
- info = {Easy creation of potential energy curve diagrams} ,
- date = 2013/04/18 ,
- version = 0.1c ,
- keywords = {energy diagrams,tikz,LaTeX},
- modules = true ,
- code-box = {
- backgroundcolor = gray!2!white ,
- skipbelow = .6\baselineskip plus .5ex minus .5ex ,
- skipabove = .6\baselineskip plus .5ex minus .5ex ,
- roundcorner = 3pt
+\documentclass[load-preamble+]{cnltx-doc}
+\usepackage[utf8]{inputenc}
+\usepackage{endiagram}
+
+\setcnltx{
+ package = endiagram ,
+ title = \ENdiagram ,
+ authors = Clemens Niederberger ,
+ email = contact@mychemistry.eu ,
+ url = https://bitbucket.org/cgnieder/endiagram/ ,
+ add-cmds = {
+ AddAxisLabel,
+ ENcurve, ENsetup,
+ MakeOrigin, ShowEa, ShowGain,
+ ShowNiveaus
+ } ,
+ add-envs = { MOdiagram } ,
+ add-silent-cmds = {
+ arrow,
+ calory, ch, chemfig, chemsetup, color, command,
+ DeclareChemIUPAC, draw,
+ fontfamily,
+ iso,
+ joule,
+ kilo,
+ lewis, libertineLF,
+ mole,
+ node,
+ per,
+ schemestart, schemestop, selectfont, setatomsep, sisetup,
+ tert, tikz, transitionstatesymbol
}
}
-\usepackage{libertinehologopatch}
-
-\cnpkgusecolorscheme{friendly}
-
-\renewcommand*\othersectionlevelsformat[3]{%
- \textcolor{main}{#3\autodot}\enskip}
-\renewcommand*\partformat{%
- \textcolor{main}{\partname~\thepart\autodot}}
-
-\addcmds{
- AddAxisLabel, arrow,
- calory, ch, chemfig, chemsetup, color, command,
- DeclareChemIUPAC, draw,
- ENcurve, ENsetup,
- fontfamily,
- iso,
- joule,
- kilo,
- lewis,
- MakeOrigin, mole,
- node,
- per,
- schemestart, schemestop, selectfont, setatomsep, ShowEa, ShowGain,
- ShowNiveaus, sisetup,
- tert, tikz, transitionstatesymbol
-}
-\usepackage{endiagram,chemmacros,chemfig,ragged2e,fnpct}
+\newpackagename\ENdiagram{endiagram}
+
+\defbibheading{bibliography}{\addsec{References}}
+
+\usepackage{chemmacros,chemfig,ragged2e}
\usepackage{acro}
\acsetup{short-format=\scshape}
@@ -98,23 +87,6 @@
long = minimal working example
}
-\usepackage{filecontents}
-\begin{filecontents}{\jobname.ist}
- heading_prefix "{\\bfseries "
- heading_suffix "\\hfil}\\nopagebreak\n"
- headings_flag 1
- delim_0 "\\dotfill\\hyperpage{"
- delim_1 "\\dotfill\\hyperpage{"
- delim_2 "\\dotfill\\hyperpage{"
- delim_r "}\\textendash\\hyperpage{"
- delim_t "}"
- suffix_2p "\\nohyperpage{\\,f.}"
- suffix_3p "\\nohyperpage{\\,ff.}"
-\end{filecontents}
-\usepackage{imakeidx}
-\indexsetup{noclearpage,othercode=\footnotesize}
-\makeindex[options={-s \jobname.ist},intoc,columns=3]
-
\begin{filecontents}{\jobname.bib}
@book{brueckner,
author = {Reinhard Br\"uckner},
@@ -142,1110 +114,1193 @@
}
\end{filecontents}
-\usepackage[backend=biber,style=alphabetic]{biblatex}
-\addbibresource{\jobname.bib}
-
-\setlength{\marginparwidth}{1.5\marginparwidth}
-
-\ExplSyntaxOn
-\NewDocumentCommand \Default {g}
- {
- \hfill\llap
- {
- \IfNoValueTF { #1 }
- {(initially~empty)}
- {Default:~\code{#1}}
- }
- \newline
- }
-\NewDocumentCommand \NoDefault {}
- { \hfill \newline }
-\ExplSyntaxOff
+% \setlength{\marginparwidth}{1.5\marginparwidth}
-\def\code#1{\codefont{\frenchspacing#1}}
+\newcommand*\TikZ{Ti\textit{k}Z}
\begin{document}
\section{Licence and Requirements}
-Permission is granted to copy, distribute and/or modify this software under the
-terms of the \LaTeX{} Project Public License, version 1.3 or later
-(\url{http://www.latex-project.org/lppl.txt}). This package has the status
-``maintained.''
+\license
-\ENdiagram needs the \paket{l3kernel} and the package \paket{xparse}. \paket{xparse}
-is part of the \paket{l3packages} bundle. \ENdiagram also needs \paket[pgf]{\TIKZ}
-and \paket{siunitx}~\cite{pkg:siunitx}.
+\ENdiagram\ needs the \bnd{l3kernel}~\cite{bnd:l3kernel} and the package
+\pkg{xparse}. \pkg{xparse} is part of the
+\bnd{l3packages}~\cite{bnd:l3packages} bundle. \ENdiagram\ also needs
+\TikZ~\cite{pkg:pgf} and \pkg{siunitx}~\cite{pkg:siunitx}.
-Basic knowledge of \TikZ/pgf \cite{pkg:tikz} is recommended.
+Basic knowledge of \TikZ/pgf is recommended.
\section{Caveat}
-This package is in an experimental state. There is lots of code to clean up and
-there are many loose ends to be tied together until I'll be satisfied to publish
-this package as stable. However, as the unofficial release on my blog has gotten
-quite some interest\footnote{$\ge 400$ downloads} I decided to publish this
-experimental version on the \ac{CTAN} nonetheless.
+This package is in an experimental state. There is lots of code to clean up
+and there are many loose ends to be tied together until I'll be satisfied to
+publish this package as stable. However, as the unofficial release on my blog
+has gotten quite some interest\footnote{$\ge 400$ downloads} I decided to
+publish this experimental version on the \CTAN{} nonetheless.
If you detect any bugs -- and I guess you will -- please write me a short email
with a \ac{MWE} showing the undesired behaviour or report on issue on
\url{https://www.bitbucket.org/cgnieder/endiagram}.
-\section{Before We Start}
-This document presents commands and options in a consistent way:
-\begin{beschreibung}
- \Umg{environment}[<options>]{...}
- \Befehl{command}[<options>]{<arg>}
- \Option{option}{\default{default}|value}\newline
- choice option with a \default{default value} that will be used, if the option
- is set without value.
- \Option{option}{<type>}\newline
- option that needs an input of a certain type.
- \Option[command]{option}{<type>}\newline
- option that belongs to the module \textcolor{module}{\code{command}}.
-\end{beschreibung}
-Options can be used in the \oa{<options>} arguments. There are two kinds of
-options: choice options where you can choose one of the values separated with
-\code{|}; an underlined value is a default value that is used, if no value is
-given. The others need a value of a certain type like a number (\code{<num>}),
-arbitrary input (\code{<text>}), \TikZ\ options (\code{<tikz>}) \etc.
-
-As a rule commands are only defined inside the \env{endiagram}{} environment.
+\section{Setup}
+
+There are two kinds of options: choice options where you can choose one of the
+values separated with \code{|}; an underlined value is a default value that is
+used, if no value is given. The others need a value of a certain type like a
+number (\meta{num}), arbitrary input (\meta{text}), \TikZ\ options
+(\meta{tikz}) \etc.
+
+As a rule commands are only defined inside the \env{endiagram} environment.
Options can also be set up with this command:
-\begin{beschreibung}
- \Befehl{ENsetup}[<module>]{<options>}
-\end{beschreibung}
-
-\begin{beispiel}[code only]
- \ENsetup{option1 = value1, option2 = value2}
- \ENsetup{module/option = value}
- \ENsetup[module]{option = value}
-\end{beispiel}
-
-Options that belong to a module are specific to a command. The command
-\cmd{command} they belong to can \emph{only} have the options marked with
-\textcolor{module}{\code{command}} in his argument \oa{<options>}.
-
-All other options can also be set globally as package options. These are options
-which do \emph{not} belong to a module like for example the \key{draft} option
-(see page~\pageref{key:debug}):
-\begin{beispiel}[code only]
- \usepackage[draft]{endiagram}
-\end{beispiel}
-
-\section{The Curve -- \cmd{ENcurve}}\secidx{curve}
-The potential energy curves are drawn inside the \env{endiagram}{\ldots}
-environment using the command \cmd{ENcurve}.
-\begin{beschreibung}
- \Umg{endiagram}[<options>]{}
- \Befehl{ENcurve}[<options>]{<level1>,<level2>,<level3>}
-\end{beschreibung}
+\begin{commands}
+ \command{ENsetup}[\oarg{module}\marg{options}]
+ The setup command.
+\end{commands}
+
+\begin{sourcecode}
+ \ENsetup{option1 = value1, option2 = value2}
+ \ENsetup{module/option = value}
+ \ENsetup[module]{option = value}
+\end{sourcecode}
+
+Options that belong to a module are specific to a command. The command
+\cs*{command} they belong to can \emph{only} have the options marked with
+\module*{command} in his argument \oarg{options}.
+
+All other options can also be set globally as package options. These are
+options which do \emph{not} belong to a module like for example the
+\option{draft} option (see page~\pageref{key:debug}):
+\begin{sourcecode}
+ \usepackage[draft]{endiagram}
+\end{sourcecode}
+
+\section{The Curve -- \cs*{ENcurve}}
+The potential energy curves are drawn inside the \env{endiagram}
+environment using the command \cs{ENcurve}.
+\begin{environments}
+ \environment{endiagram}[\oarg{options}]
+ The basic environment for the potential energy curves
+\end{environments}
+\begin{commands}
+ \command{ENcurve}[\oarg{options}\Marg{\meta{level1},\meta{level2},\meta{level3}}]
+ The basic command for drawing the actual curve.
+\end{commands}
The command needs a comma separated list of relative energy levels.
-\cmd{ENcurve}{1,4,0} means the maximum is four times higher above the end level
-than the starting level.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\cmd{ENcurve} can read any number of values but needs \emph{at least three}.
+\cs{ENcurve}\Marg{1,4,0} means the maximum is four times higher above the end
+level than the starting level.
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\cs{ENcurve} can read any number of values but needs \emph{at least three}.
Less values will cause an error.
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}[scale=.7]
- \ENcurve{1,7,2.5,6,3,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}[scale=.7]
+ \ENcurve{1,7,2.5,6,3,4,0}
+ \end{endiagram}
+\end{example}
\subsection{Properties}
-\subsubsection{Scaling}\secidx[scaling]{curve}
-Values given to \cmd{ENcurve} are multiples of \ENdiagram's \ac{su}. As a default
-it is set to \SI{.5}{cm} but can be changed using an option. There are other ways
+\subsubsection{Scaling}
+
+Values given to \cs{ENcurve} are multiples of \ENdiagram's \ac{su}. As a default
+it is set to \SI{.5}{cm} but can be changed using an option. There are other ways
to influence the size of the diagram, too.
-\begin{beschreibung}
- \Option{unit}{<length>}\Default{.5cm}
- The standard unit for \cmd{ENcurve} and some other commands. This document
- refers to it with \ac{su}.
- \Option{scale}{<factor>}\Default{1}
-\end{beschreibung}
+\begin{options}
+ \keyval{unit}{length}\Default{.5cm}
+ The standard unit for \cs{ENcurve} and some other commands. This document
+ refers to it with \ac{su}. \label{key:unit}
+ \keyval{scale}{factor}\Default{1}
+ A scaling factor that allows scaling the diagram.
+\end{options}
A changed \ac{su}:
-\begin{beispiel}
-\begin{endiagram}[unit=2em]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[unit=2em]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
Scaled by the factor \code{1.5}:
-\begin{beispiel}
-\begin{endiagram}[scale=1.5]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\subsubsection{Influencing the position relative to the axes}\secidx[position]{curve}
-The \code{offset} options control the length and position of the horizontal axis
-relative to the curve.
-\begin{beschreibung}
- \Option{offset}{<num>}\Default{0}
- \code{<num>} is a multiple of the \ac{su} (see page~\pageref{key:unit}).
- \Option{r-offset}{<num>}\Default{0}
- \code{<num>} is a multiple of the \ac{su}.
- \Option{l-offset}{<num>}\Default{0}
- \code{<num>} is a multiple of the \ac{su}.
-\end{beschreibung}
+\begin{example}[side-by-side]
+ \begin{endiagram}[scale=1.5]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\subsubsection{Influencing the position relative to the axes}
+
+The \option{offset} options control the length and position of the horizontal
+axis relative to the curve.
+\begin{options}
+ \keyval{offset}{num}\Default{0}
+ \meta{num} is a multiple of the \ac{su} (see page~\pageref{key:unit}).
+ \keyval{r-offset}{num}\Default{0}
+ \meta{num} is a multiple of the \ac{su}.
+ \keyval{l-offset}{num}\Default{0}
+ \meta{num} is a multiple of the \ac{su}.
+\end{options}
The default behaviour for comparison:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\key{l-offset} controls the distance of the start of the $x$ axis to the start
-of the curve:
-\begin{beispiel}
-closer to the $y$ axis:\\
-\begin{endiagram}[l-offset=-1]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\key{r-offset} controls the ``protruding'' of the $x$ axis after the curve:
-\begin{beispiel}
-$x$ axis extended to the right:\\
-\begin{endiagram}[r-offset=1]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\key{offset} changes both values equally:
-\begin{beispiel}
-$x$ extended to the left and the right:\\
-\begin{endiagram}[offset=1]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\subsubsection{Increment between the levels}\secidx[increment]{curve}
-With the option
-\begin{beschreibung}
- \Option[ENcurve]{step}{<num>}\Default{2}
- \code{<num>} is a multiple of the \ac{su} (see page~\pageref{key:unit}).
-\end{beschreibung}
-the default increment between the levels can be changed.
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve{1,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve[step=3]{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-Sometimes a certain level should be shifted against the others. This is possible
-using an optional argument to the value of that level:
-\begin{beschreibung}
- \Befehl{ENcurve}{<level>[<offset>],...}\NoDefault
- \oa{<offset>} is a multiple of the \ac{su} (see page~\pageref{key:unit}) and is set
- to \code{0} as default. The level will be shifted to the right (positive values)
- or left (negative values).
-\end{beschreibung}
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve{1,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{1,4[.5],0}
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{1,4[-.5],0}
-\end{endiagram}
-\end{beispiel}
-
-\subsubsection{The shape}\secidx[shape]{curve}
-The option
-\begin{beschreibung}
- \Option[ENcurve]{looseness}{<value>}\Default{.5}
- should be a number between \code{0} and \code{1}.
-\end{beschreibung}
-changes the shape of the curve.
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve[looseness=0]{0,3,1}
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{0,3,1}% corresponds looseness=.5
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve[looseness=1]{0,3,1}
-\end{endiagram}
-\end{beispiel}
-
-\subsubsection{Ending minima}\secidx[minima]{curve}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\option{l-offset} controls the distance of the start of the $x$ axis to the
+start of the curve:
+\begin{example}[side-by-side]
+ closer to the $y$ axis:\par
+ \begin{endiagram}[l-offset=-1]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\option{r-offset} controls the ``protruding'' of the $x$ axis after the curve:
+\begin{example}[side-by-side]
+ $x$ axis extended to the right:\par
+ \begin{endiagram}[r-offset=1]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\option{offset} changes both values equally:
+\begin{example}[side-by-side]
+ $x$ extended to the left and the right:\par
+ \begin{endiagram}[offset=1]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\subsubsection{Increment between the levels}
+
+With the option \option{step} the default increment between the levels can be
+changed:
+\begin{options}
+ \keyval{step}{num}\Module{ENcurve}\Default{2}
+ \meta{num} is a multiple of the \ac{su} (see page~\pageref{key:unit}).
+\end{options}
+
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{1,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve[step=3]{1,4,0}
+ \end{endiagram}
+\end{example}
+
+Sometimes a certain level should be shifted against the others. This is
+possible using an optional argument to the value of that level:
+\begin{commands}
+ \command{ENcurve}[\Marg{\meta{level}\oarg{offset},...}]
+ \meta{offset} is a multiple of the \ac{su} (see page~\pageref{key:unit})
+ and is set to \code{0} as default. The level will be shifted to the right
+ (positive values) or left (negative values).
+\end{commands}
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{1,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{1,4[.5],0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{1,4[-.5],0}
+ \end{endiagram}
+\end{example}
+
+\subsubsection{The shape}
+
+The option \option{looseness} changes the shape of the curve:
+\begin{options}
+ \keyval{looseness}{value}\Module{ENcurve}\Default{.5}
+ should be a number between \code{0} and \code{1}.
+\end{options}
+
+\begin{example}
+ \begin{endiagram}
+ \ENcurve[looseness=0]{0,3,1}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{0,3,1}% corresponds looseness=.5
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve[looseness=1]{0,3,1}
+ \end{endiagram}
+\end{example}
+
+\subsubsection{Ending minima}
+
Sometimes potential energy curves are drawn with local minima at the start and
-the end of the cuve. The option
-\begin{beschreibung}
- \Option[ENcurve]{minima}{\default{true}|false}\Default{false}
-\end{beschreibung}
-en- or disables them:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[minima]{1,4,0}
-\end{endiagram}
-\end{beispiel}
-
-\subsubsection{\TIKZ\ style}\secidx[style]{curve}
-The style of the curve can be changed using \TikZ\ options:
-\begin{beschreibung}
- \Option[ENcurve]{tikz}{<tikz>}\Default
- Valid are options that can be used with \verb=\draw=.
-\end{beschreibung}
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[tikz={red,dotted}]{0,3,1}
-\end{endiagram}
-\end{beispiel}
-
-\subsection{The Axes}\secidx[axes]{curve}\secidx{axes}
+the end of the cuve. The option \option{minima} en- or disables them:
+\begin{options}
+ \keybool{minima}\Module{ENcurve}\Default{false}
+ Draw local minima at the ends of the curve.
+\end{options}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve[minima]{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\subsubsection{\TikZ{} style}
+
+The style of the curve can be changed using \TikZ{} options:
+\begin{options}
+ \keyval{tikz}{tikz}\Module{ENcurve}\Default
+ Valid are options that can be used with \cs*{draw}.
+\end{options}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve[tikz={red,dotted}]{0,3,1}
+ \end{endiagram}
+\end{example}
+
+\subsection{The Axes}
+
There are also possibilities to customize the axes.
-\begin{beschreibung}
- \Option{axes}{xy|y|y-l|y-r|x|all|false}\Default{xy}
- Number and type of axes.
- \Option{x-axis}{<tikz>}\Default
- \TikZ options to the $x$ axis.
- \Option{y-axis}{<tikz>}\Default
- \TikZ options to the $y$ axis.
- \Option{x-label}{below|right}\Default{below}
- Position of the $x$ axis label.
- \Option{y-label}{above|left}\Default{left}
- Position of the $y$ axis label.
- \Option{x-label-pos}{<value>}\Default{.5}
- Position of the $x$ axis label when \key{x-label}{below} is set.
- \Option{y-label-pos}{<value>}\Default{.5}
- Position of the $y$ axis label when \key{y-label}{left} is set.
- \Option{x-label-offset}{<length>}\Default{0pt}
- Distance between label and $x$ axis.
- \Option{y-label-offset}{<length>}\Default{0pt}
- Distance between label and $y$ axis.
- \Option{x-label-angle}{<angle>}\Default{0}
- Angle which rotates the $x$ axis label counter clockwise.
- \Option{y-label-angle}{<angle>}\Default{0}
- Angle which rotates the $y$ axis label counter clockwise.
- \Option{x-label-text}{<text>}\Default{\$\cmd{xi}\$}
- $x$ axis label.
- \Option{y-label-text}{<text>}\Default{\$E\$}
+\begin{options}
+ \keychoice{axes}{xy,y,y-l,y-r,x,all,false}\Default{xy}
+ Number and type of axes.
+ \keyval{x-axis}{tikz}\Default
+ \TikZ{} options to the $x$ axis.
+ \keyval{y-axis}{tikz}\Default
+ \TikZ{} options to the $y$ axis.
+ \keychoice{x-label}{below,right}\Default{below}
+ Position of the $x$ axis label.
+ \keychoice{y-label}{above,left}\Default{left}
+ Position of the $y$ axis label.
+ \keyval{x-label-pos}{value}\Default{.5}
+ Position of the $x$ axis label when \keyis{x-label}{below} is set.
+ \keyval{y-label-pos}{value}\Default{.5}
+ Position of the $y$ axis label when \keyis{y-label}{left} is set.
+ \keyval{x-label-offset}{length}\Default{0pt}
+ Distance between label and $x$ axis.
+ \keyval{y-label-offset}{length}\Default{0pt}
+ Distance between label and $y$ axis.
+ \keyval{x-label-angle}{angle}\Default{0}
+ Angle which rotates the $x$ axis label counter clockwise.
+ \keyval{y-label-angle}{angle}\Default{0}
+ Angle which rotates the $y$ axis label counter clockwise.
+ \keyval{x-label-text}{text}\Default{\$\cs*{xi}\$}
+ $x$ axis label.
+ \keyval{y-label-text}{text}\Default{\$E\$}
$y$ axis label.
-\end{beschreibung}
+\end{options}
No axes:
-\begin{beispiel}
-\begin{endiagram}[axes=false]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[axes=false]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
All axes:
-\begin{beispiel}
-\begin{endiagram}[axes=all]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[axes=all]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
Only the $x$ axis:
-\begin{beispiel}
-\begin{endiagram}[axes=x]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[axes=x]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
Changed labels:
-\begin{beispiel}
-\begin{endiagram}[x-label-text=\footnotesize reaction coordinate]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[x-label-text=\footnotesize reaction coordinate]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
Different positions of the labels:
-\begin{beispiel}[below]
-\begin{endiagram}[
- x-label=right,
- y-label=above]
- \ENcurve{1,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}[
- x-label-pos=.7,
- y-label-pos=.7,
- y-label-angle=-90,
- y-label-offset=5pt]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}
+ \begin{endiagram}[
+ x-label=right,
+ y-label=above]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}[
+ x-label-pos=.7,
+ y-label-pos=.7,
+ y-label-angle=-90,
+ y-label-offset=5pt]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
Crazy setup:
-\begin{beispiel}
-\begin{endiagram}[x-axis={draw=blue,dashed,font=\color{green}}]
- \ENcurve{1,4,0}
-\end{endiagram}
-\end{beispiel}
-\secidx*{axes}
-
-\subsection{Debugging Information}\secidx[debugging]{curve}\index{debugging}
-For precise adjustments of details -- particularly with the options and commands
-described in the next sections -- some information is useful that is hidden
-normally. These options enable access:
-\begin{beschreibung}
- \Option{debug}{\default{true}|false}\Default{false}
- \Option{draft}{\default{true}|false}\Default{false}
- An Alias to \key{debug}.
- \Option{final}{\default{true}|false}\Default{true}
- The opposite of \key{draft}.
-\end{beschreibung}
-\begin{beispiel}[below]
-\begin{endiagram}[debug]
- \ENcurve{1,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}[debug,unit=2em]
- \ENcurve[step=3,minima]{1,4,0}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[x-axis={draw=blue,dashed,font=\color{green}}]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+\end{example}
+
+\subsection{Debugging Information}
+
+For precise adjustments of details -- particularly with the options and
+commands described in the next sections -- some information is useful that is
+hidden normally. These options enable access:
+\begin{options}
+ \keybool{debug}\Default{false}
+ Enable debug mode of \ENdiagram. \label{key:debug}
+ \keybool{draft}\Default{false}
+ An alias to \option{debug}.
+ \keybool{final}\Default{true}
+ The opposite of \option{draft}.
+\end{options}
+
+\begin{example}
+ \begin{endiagram}[debug]
+ \ENcurve{1,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}[debug,unit=2em]
+ \ENcurve[step=3,minima]{1,4,0}
+ \end{endiagram}
+\end{example}
Shown are a grid, the origin and the coordinates and names of the levels.
-Depending on the commands you're using you get more information.It is described
-with the commands they belong to.
-\secidx*{curve}
-
-\section{The Levels}\secidx{levels}
-\subsection{The \cmd{ShowNiveaus} Command}
-The command
-\begin{beschreibung}
- \Befehl{ShowNiveaus}[<options>]
-\end{beschreibung}
-draws horizontal lines to the levels:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus
-\end{endiagram}
-\end{beispiel}
+Depending on the commands you're using you get more information. It is
+described with the commands they belong to.
+
+\section{The Levels}
+\subsection{The \cs*{ShowNiveaus} Command}
+The command \cs{ShowNiveaus} draws horizontal lines to the levels:
+\begin{commands}
+ \command{ShowNiveaus}[\oarg{options}]
+ Draw a visual hint of the different niveaus.
+\end{commands}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus
+ \end{endiagram}
+\end{example}
\subsection{Customization}
+
A number of options allow fine-tuning:
-\begin{beschreibung}
- \Option[ShowNiveaus]{length}{<num>}\Default{1}
- The length of the lines. \code{<num>} is a multiple of the \ac{su} (see
- page~\pageref{key:unit}).
- \Option[ShowNiveaus]{shift}{<num>}\Default{0}
- Shift to the right (positive values) or the left (negative values).
- \code{<num>} is a multiple of the \ac{su}.
- \Option[ShowNiveaus]{tikz}{<tikz>}\Default
- \TikZ options to modify the style of the lines.
-\end{beschreibung}
+\begin{options}
+ \keyval{length}{num}\Module{ShowNiveaus}\Default{1}
+ The length of the lines. \meta{num} is a multiple of the \ac{su} (see
+ page~\pageref{key:unit}).
+ \keyval{shift}{num}\Module{ShowNiveaus}\Default{0}
+ Shift to the right (positive values) or the left (negative values).
+ \meta{num} is a multiple of the \ac{su}.
+ \keyval{tikz}{tikz}\Module{ShowNiveaus}\Default
+ \TikZ options to modify the style of the lines.
+\end{options}
Longer lines:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[length=2]
-\end{endiagram}
-\end{beispiel}
-
-Without \key{shift} are centered to the extrema , \ie they protrude by half of
-the value specified with \key{length}.
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[shift=.5]
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[length=2,shift=1]
-\end{endiagram}
-\end{beispiel}
-Maybe the examples in the next section will make it more clear why \key{shift}
-can be useful.
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[length=2]
+ \end{endiagram}
+\end{example}
+
+Without option \option{shift} the lines are centered to the extrema , \ie,
+they protrude by half of the value specified with option \option{length}.
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[shift=.5]
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[length=2,shift=1]
+ \end{endiagram}
+\end{example}
+Maybe the examples in the next section will make it more clear why option
+\option{shift} can be useful.
\subsection{Choose Levels Explicitly}
+
If you don't want to draw a line to every level you can use this option:
-\begin{beschreibung}
- \Option[ShowNiveaus]{niveau}{<id1>,<id2>}\NoDefault
- The \code{<id>} is the name of the level as shown by the \key{debug} option,
- see page~\pageref{key:debug}.
-\end{beschreibung}
-
-The debug information helps in choosing the right level. The names of the levels
-follow the scheme \code{N-<number of curve>-<number of level>}.
-\begin{beispiel}[below]
-\begin{endiagram}[debug]
- \ENcurve{3,4,0}
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[niveau=N1-2]
-\end{endiagram}
-\end{beispiel}
+\begin{options}
+ \keychoice{niveau}{\Marg{\meta{id1},\meta{id2}}}\Module{ShowNiveaus}
+ The \meta{id} is the name of the level as shown by the \option{debug}
+ option, see page~\pageref{key:debug}.
+\end{options}
+
+The debug information helps in choosing the right level. The names of the
+levels follow the scheme \code{N-\meta{number of curve}-\meta{number of
+ level}}.
+\begin{example}
+ \begin{endiagram}[debug]
+ \ENcurve{3,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[niveau=N1-2]
+ \end{endiagram}
+\end{example}
Every level can have a different color, length and shift:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[length=2,tikz=red,niveau=N1-2]
- \ShowNiveaus[niveau=N1-1,shift=-.5]
- \ShowNiveaus[niveau=N1-3,shift=.5]
-\end{endiagram}
-\end{beispiel}
-\secidx*{Niveaus}
-
-\section{The Energy Gain}\secidx{energy gain}
-\subsection{The \cmd{ShowGain} Command}
-The command
-\begin{beschreibung}
- \Befehl{ShowGain}[<options>]
-\end{beschreibung}
-enables you the show the energy gain or loss of the reaction. It is always the
-difference between the first and the last level.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowGain
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[length=2,tikz=red,niveau=N1-2]
+ \ShowNiveaus[niveau=N1-1,shift=-.5]
+ \ShowNiveaus[niveau=N1-3,shift=.5]
+ \end{endiagram}
+\end{example}
+
+\section{The Energy Gain}
+\subsection{The \cs*{ShowGain} Command}
+
+The command \cs{ShowGain} enables you the show the energy gain or loss of the
+reaction. It is always the difference between the first and the last level.
+\begin{commands}
+ \command{ShowGain}[\oarg{options}]
+ Draw a visual hint of the energy gain.
+\end{commands}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowGain
+ \end{endiagram}
+\end{example}
\subsection{Customization}
+
The command has options to modify the appearance.
-\begin{beschreibung}
- %%
- \Option[ShowGain]{tikz}{<tikz>}\Default{<->}
- \TikZ options for the vertical line.
- %%
- \Option[ShowGain]{connect}{<tikz>}\Default{dashed,help lines}
- \TikZ options for the connecting line.
- %%
- \Option[ShowGain]{connect-from-line}{\default{true}|false}\Default{false}
- The connecting line starts either at the maximum/minimum or at the line drawn
- by \cmd{ShowNiveaus}. This option works with the default values but otherwise
- can lead to unwanted results. To avoid that you can either set \cmd{ShowGain}
- \emph{before} \cmd{ShowNiveaus} or you need to choose another way.
- %%
- \Option[ShowGain]{offset}{<num>}\Default{0}
- Shifts the vertical line to the right (positive value) or the left (negative
- value). \code{<num>} is a multiple of \ac{su} (see page~\pageref{key:unit}).
- %%
- \Option[ShowGain]{label}{\default{true}|false|<text>}\Default{false}
- Use the default label (\code{true}) or an own label (\code{<text>}).\label{key:showgain_label}
- %%
- \Option[ShowGain]{label-side}{right|left}\Default{right}
- The side of the vertical line on which the label should be placed.
- %%
- \Option[ShowGain]{label-pos}{<value>}\Default{.5}
- Position at the line. \code{0} means at the height of $H_1$, \ie the starting
- level, \code{1} means at the height of $H_2$, \ie the ending level.
- %%
- \Option[ShowGain]{label-tikz}{<tikz>}\Default
- \TikZ options for the label.
-\end{beschreibung}
-
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowGain[connect={dotted,red},offset=2]
-\end{endiagram}
-\end{beispiel}
-
-Using the \key{label} option:
-\begin{beispiel}[below]
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowGain[label]
-\end{endiagram}
-\begin{endiagram}
- \ENcurve{0,4,3}
- \ShowGain[label]
-\end{endiagram}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowGain[label=exothermic]
-\end{endiagram}
-\end{beispiel}
+\begin{options}
+ \keyval{tikz}{tikz}\Module{ShowGain}\Default{<->}
+ \TikZ{} options for the vertical line.
+ \keyval{connect}{tikz}\Module{ShowGain}\Default{dashed,help lines}
+ \TikZ{} options for the connecting line.
+ \keybool{connect-from-line}\Module{ShowGain}\Default{false}
+ The connecting line starts either at the maximum/minimum or at the line
+ drawn by \cs{ShowNiveaus}. This option works with the default values but
+ otherwise can lead to unwanted results. To avoid that you can either set
+ \cs{ShowGain} \emph{before} \cs{ShowNiveaus} or you need to choose another
+ way.
+ \keyval{offset}{num}\Module{ShowGain}\Default{0}
+ Shifts the vertical line to the right (positive value) or the left
+ (negative value). \meta{num} is a multiple of \ac{su} (see
+ page~\pageref{key:unit}).
+ \keychoice{label}{\default{true},false,\meta{text}}\Module{ShowGain}\Default{false}
+ Use the default label (\code{true}) or an own label
+ (\meta{text}).\label{key:showgain_label}
+ \keychoice{label-side}{right,left}\Module{ShowGain}\Default{right}
+ The side of the vertical line on which the label should be placed.
+ \keyval{label-pos}{<value>}\Module{ShowGain}\Default{.5}
+ Position at the line. \code{0} means at the height of $H_1$, \ie, the
+ starting level, \code{1} means at the height of $H_2$, \ie, the ending
+ level.
+ \keyval{label-tikz}{<tikz>}\Module{ShowGain}\Default
+ \TikZ{} options for the label.
+\end{options}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowGain[connect={dotted,red},offset=2]
+ \end{endiagram}
+\end{example}
+
+Using the \option{label} option:
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowGain[label]
+ \end{endiagram}
+ \begin{endiagram}
+ \ENcurve{0,4,3}
+ \ShowGain[label]
+ \end{endiagram}
+\end{example}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowGain[label=exothermic]
+ \end{endiagram}
+\end{example}
Connecting lines and levels are overlapping:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus
- \ShowGain[connect=red]
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus
+ \ShowGain[connect=red]
+ \end{endiagram}
+\end{example}
A possible solution:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus
- \ShowGain[connect-from-line,connect=red]
-\end{endiagram}
-\end{beispiel}
-
-Better would be to set \cmd{ShowNiveaus} \emph{after} \cmd{ShowGain}, particularly
-if you're not using the default settings.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowNiveaus[niveau=N1-1]
- \ShowGain[connect={red,dotted}]
-\end{endiagram}
-\begin{endiagram}
- \ENcurve{3,4,0}
- \ShowGain[connect={red,dotted}]
- \ShowNiveaus[niveau=N1-1]
-\end{endiagram}
-\end{beispiel}
-
-\subsection{Debugging Information}\index{debugging}\secidx[debugging]{energy gain}
-Using the \key{debug} option (see page~\pageref{key:debug}) gives you further
-information:
-\begin{beispiel}
-\begin{endiagram}[debug]
- \ENcurve{3,4,0}
- \ShowGain
-\end{endiagram}
-\end{beispiel}
-\secidx*{energy gain}
-
-\section{The Activation Energy}\secidx{activation energy}
-\subsection{The \cmd{ShowEa} Command}
-This command is similar to the commands \cmd{ShowNiveaus} and \cmd{ShowGain}.
-\begin{beschreibung}
- \Befehl{ShowEa}[<options>]
-\end{beschreibung}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus
+ \ShowGain[connect-from-line,connect=red]
+ \end{endiagram}
+\end{example}
+
+Better would be to set \cs{ShowNiveaus} \emph{after} \cs{ShowGain},
+particularly if you're not using the default settings.
+\begin{example}
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowNiveaus[niveau=N1-1]
+ \ShowGain[connect={red,dotted}]
+ \end{endiagram}
+ \begin{endiagram}
+ \ENcurve{3,4,0}
+ \ShowGain[connect={red,dotted}]
+ \ShowNiveaus[niveau=N1-1]
+ \end{endiagram}
+\end{example}
+
+\subsection{Debugging Information}
+Using the \option{debug} option (see page~\pageref{key:debug}) gives you
+further information:
+\begin{example}[side-by-side]
+ \begin{endiagram}[debug]
+ \ENcurve{3,4,0}
+ \ShowGain
+ \end{endiagram}
+\end{example}
+
+\section{The Activation Energy}
+\subsection{The \cs*{ShowEa} Command}
+This command is similar to the commands \cs{ShowNiveaus} and \cs{ShowGain}.
+\begin{commands}
+ \command{ShowEa}[\oarg{options}]
+ Draw a visual hint af the activation energy.
+\end{commands}
+
It enables to show the activation energy:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{2,4,0}
- \ShowEa
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{2,4,0}
+ \ShowEa
+ \end{endiagram}
+\end{example}
The default behaviour shows the difference between the \emph{first} maximum
after a \emph{previous} minimum to that minimum:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{2,0,4}
- \ShowEa
-\end{endiagram}
-\end{beispiel}
-
-This also holds if there is more than one maximum. How you choose a different
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{2,0,4}
+ \ShowEa
+ \end{endiagram}
+\end{example}
+
+This also holds if there is more than one maximum. How you choose a different
one is described in the next section.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa
+ \end{endiagram}
+\end{example}
\subsection{Choose Level Explicitly}
-The default behaviour is all right if there is only one maximum. If there are
-more one might want to choose a different one. The following options allow that.
-\begin{beschreibung}
- \Option[ShowEa]{max}{first|all}\Default{first}
- Show the difference to the first maximum or to all maxima.
- \Option[ShowEa]{from}{\{(<coordinate1>)to(<coordinate2>)\}}\NoDefault
- Specify the coordinates that should be connected. You can either use the
- coordinates \code{(<x>,<y>)} or the name \code{(<name>)} of the node.
-\end{beschreibung}
-
-Using \key[ShowEa]{max}{all}:
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa[max=all]
-\end{endiagram}
-\end{beispiel}
-
-
-Since in most cases this won't be what you want you can specify the coordinates
-yourself. The option \key{debug} (see page~\pageref{key:debug}) may help.
-\begin{beispiel}[below]
-\begin{endiagram}[debug]
- \ENcurve{1,5,2.5,4,0}
- \ShowEa
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa[from={(0,1) to (6,4)}]
-\end{endiagram}
-
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa[from={(N1-1) to (N1-3)}]
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa[from={(N1-5) to (N1-4)}]
-\end{endiagram}
-\end{beispiel}
+The default behaviour is all right if there is only one maximum. If there are
+more one might want to choose a different one. The following options allow
+that.
+\begin{options}
+ \keychoice{max}{first,all}\Module{ShowEa}\Default{first}
+ Show the difference to the first maximum or to all maxima.
+ \keychoice{from}{\Marg{(\meta{coordinate1})to(\meta{coordinate2})}}\Module{ShowEa}
+ Specify the coordinates that should be connected. You can either use the
+ coordinates \code{(\meta{x},\meta{y})} or the name \code{(\meta{name})} of
+ the node.
+\end{options}
+
+Using \keyis{max}{all}:
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa[max=all]
+ \end{endiagram}
+\end{example}
+
+Since in most cases this won't be what you want you can specify the
+coordinates yourself. The option \option{debug} (see
+page~\pageref{key:debug}) may help.
+\begin{example}
+ \begin{endiagram}[debug]
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa[from={(0,1) to (6,4)}]
+ \end{endiagram}
+
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa[from={(N1-1) to (N1-3)}]
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa[from={(N1-5) to (N1-4)}]
+ \end{endiagram}
+\end{example}
In every case the position of the vertical line is determined by the \emph{first}
coordinate.
\subsection{Customization}
Again there are a number of options to customize the appearance.
-\begin{beschreibung}
- \Option[ShowEa]{tikz}{<tikz>}\Default{<->}
- \TikZ options for the vertical line.
- \Option[ShowEa]{connect}{<tikz>}\Default{dashed,help lines}
- \TikZ options for the horizontal line.
- \Option[ShowEa]{label}{\default{true}|false|<text>}\Default{false}
- Use the default label ($E_{\mathrm{a}}$) or an own label.\label{key:showea_label}
- \Option[ShowEa]{label-side}{right|left}\Default{right}
- The side of the vertical line where the label should appear.
- \Option[ShowEa]{label-pos}{<value>}\Default{.5}
- Determines the vertical position of the label relative to the vertical line.
- \code{0} means at the lower end, \code{1} means at the upper end.
- \Option[ShowEa]{label-tikz}{<tikz>}\Default
- \TikZ options for the label.
-\end{beschreibung}
-
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[step=4]{1,6,0}
- \ShowEa[label,label-pos=.3]
-\end{endiagram}
-\end{beispiel}
-
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
- \ShowEa[
- from = {(N1-1) to (N1-3)},
- connect = {draw=none},
- label = endoth.]
- \ShowEa[
- from = (N1-3) to (N1-5),
- label = exoth.,
- label-pos = .7]
- \ShowGain[label=exoth.]
-\end{endiagram}
-\end{beispiel}
-
-\subsection{Debugging Information}\index{debugging}\secidx[debugging]{activation energy}
-The \key{debug} option gives you further information.
-\begin{beispiel}[below]
-\begin{endiagram}[debug]
- \ENcurve{1,5,2,3,0}
- \ShowEa[max=all]
-\end{endiagram}
-\quad
-\begin{endiagram}[debug]
- \ENcurve{1,5,2,3,0}
- \ShowEa[from={(0,1) to (6,3)}]
-\end{endiagram}
-\end{beispiel}
-\secidx*{activation energy}
-
-\section{Several Curves in one Diagram}\secidx{several curves}
-It's easy to draw several curves. You only need to use \cmd{ENcurve} more than
+\begin{options}
+ \keyval{tikz}{tikz}\Module{ShowEa}\Default{<->}
+ \TikZ{} options for the vertical line.
+ \keyval{connect}{tikz}\Module{ShowEa}\Default{dashed,help lines}
+ \TikZ{} options for the horizontal line.
+ \keychoice{label}{\default{true},false,\meta{text}}\Module{ShowEa}\Default{false}
+ Use the default label ($E_{\mathrm{a}}$) or an own
+ label.\label{key:showea_label}
+ \keychoice{label-side}{right,left}\Module{ShowEa}\Default{right}
+ The side of the vertical line where the label should appear.
+ \keyval{label-pos}{value}\Module{ShowEa}\Default{.5}
+ Determines the vertical position of the label relative to the vertical line.
+ \code{0} means at the lower end, \code{1} means at the upper end.
+ \keyval{label-tikz}{tikz}\Module{ShowEa}\Default
+ \TikZ options for the label.
+\end{options}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve[step=4]{1,6,0}
+ \ShowEa[label,label-pos=.3]
+ \end{endiagram}
+\end{example}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \ShowEa[
+ from = {(N1-1) to (N1-3)},
+ connect = {draw=none},
+ label = endoth.]
+ \ShowEa[
+ from = (N1-3) to (N1-5),
+ label = exoth.,
+ label-pos = .7]
+ \ShowGain[label=exoth.]
+ \end{endiagram}
+\end{example}
+
+\subsection{Debugging Information}
+The \option{debug} option gives you further information.
+\begin{example}
+ \begin{endiagram}[debug]
+ \ENcurve{1,5,2,3,0}
+ \ShowEa[max=all]
+ \end{endiagram}
+ \quad
+ \begin{endiagram}[debug]
+ \ENcurve{1,5,2,3,0}
+ \ShowEa[from={(0,1) to (6,3)}]
+ \end{endiagram}
+\end{example}
+
+\section{Several Curves in one Diagram}
+It's easy to draw several curves. You only need to use \cs{ENcurve} more than
once.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[tikz=blue]{1,4,0}
- \ENcurve[tikz=red]{1,2.5,0}
- \draw[blue] (5,5) -- ++(1,0) node[black,right] {with enzyme};
- \draw[red] (5,4) -- ++(1,0) node[black,right] {without enzyme};
-\end{endiagram}
-\end{beispiel}
-
-The commands \cmd{ShowNiveaus}, \cmd{ShowGain} and \cmd{ShowEa} always relate to
-the curve set at last. This means you can use them selectively.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[tikz=blue]{1,4,0}
- \ShowEa[tikz={blue,<->}]
- \ENcurve[tikz=red]{1,2.5,0}
-\end{endiagram}
-
-\begin{endiagram}
- \ENcurve[tikz=blue]{1,4,0}
- \ENcurve[tikz=red]{1,2.5,0}
- \ShowEa[tikz={red,<->}]
-\end{endiagram}
-\end{beispiel}
+\begin{example}
+ \begin{endiagram}
+ \ENcurve[tikz=blue]{1,4,0}
+ \ENcurve[tikz=red]{1,2.5,0}
+ \draw[blue] (5,5) -- ++(1,0) node[black,right] {without enzyme};
+ \draw[red] (5,4) -- ++(1,0) node[black,right] {with enzyme};
+ \end{endiagram}
+\end{example}
+
+The commands \cs{ShowNiveaus}, \cs{ShowGain} and \cs{ShowEa} always relate to
+the curve set at last. This means you can use them selectively.
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve[tikz=blue]{1,4,0}
+ \ShowEa[tikz={blue,<->}]
+ \ENcurve[tikz=red]{1,2.5,0}
+ \end{endiagram}
+
+ \begin{endiagram}
+ \ENcurve[tikz=blue]{1,4,0}
+ \ENcurve[tikz=red]{1,2.5,0}
+ \ShowEa[tikz={red,<->}]
+ \end{endiagram}
+\end{example}
Using more than one curves explains the multiple numbering of the level names:
-\begin{beispiel}
-% the names of the levels (N1-1)
-% and (N1-3) are hidden behind
-% (N2-1) and (N2-3), resp.
-\begin{endiagram}[debug]
- \ENcurve{1,4,0}
- \ENcurve{1,2.5,0}
-\end{endiagram}
-
-\begin{endiagram}
- \ENcurve[tikz=blue]{1,4,0}
- \ENcurve[tikz=red]{1,2.5,0}
- \draw[<->] (N1-2) -- (N2-2) ;
-\end{endiagram}
-\end{beispiel}
-
-Of course it's possible to choose different options for different curves. This
-means you can use curves with a different number of maxima.
-\begin{beispiel}
-\begin{endiagram}
- \ENcurve[step=4]{1,6,0}
- \ENcurve[
- tikz={densely dotted}]
- {1,4[1],2.5,3[-1],0}
-\end{endiagram}
-\end{beispiel}
-\secidx*{several curves}
-
-\section{Usage of Ti\textit{k}Z}\index{TikZ@\TIKZ}
-Since the \env{endiagram}{\ldots} environment only is a \code{tikzpicture}
-environment (well, more or less) you can use \TikZ commands inside it. This
-means you can easily add additional information to the diagram.
-\begin{beispiel}
-% needs the package `chemmacros'
-\begin{endiagram}
- \ENcurve{1,5,2,3,0}
- \ShowNiveaus[length=2,niveau={N1-2,N1-3,N1-4}]
- \node[above,xshift=4pt] at (N1-2) {[\"UZ1]$^{\transitionstatesymbol}$} ;
- \node[below] at (N1-3) {ZZ} ;
- \node[above,xshift=4pt] at (N1-4) {[\"UZ2]$^{\transitionstatesymbol}$} ;
-\end{endiagram}
-\quad
-\begin{endiagram}
- \ENcurve{2,3,0}
- \draw[<-,red] (N1-2) -- ++(2,1) node[right] {transition state} ;
-\end{endiagram}
-\end{beispiel}
-
-\subsection{The Origin}\index{origin}
+\begin{example}[side-by-side]
+ % the names of the levels (N1-1)
+ % and (N1-3) are hidden behind
+ % (N2-1) and (N2-3), resp.
+ \begin{endiagram}[debug]
+ \ENcurve{1,4,0}
+ \ENcurve{1,2.5,0}
+ \end{endiagram}
+
+ \begin{endiagram}
+ \ENcurve[tikz=blue]{1,4,0}
+ \ENcurve[tikz=red]{1,2.5,0}
+ \draw[<->] (N1-2) -- (N2-2) ;
+ \end{endiagram}
+\end{example}
+
+Of course it's possible to choose different options for different curves.
+This means you can use curves with a different number of maxima.
+\begin{example}[side-by-side]
+ \begin{endiagram}
+ \ENcurve[step=4]{1,6,0}
+ \ENcurve[
+ tikz={densely dotted}]
+ {1,4[1],2.5,3[-1],0}
+ \end{endiagram}
+\end{example}
+
+\section{Usage of \TikZ}
+Since the \env{endiagram} environment only is a \env*{tikzpicture} environment
+(well, more or less) you can use \TikZ{} commands inside it. This means you
+can easily add additional information to the diagram.
+\begin{example}
+ % needs the package `chemmacros'
+ \begin{endiagram}
+ \ENcurve{1,5,2,3,0}
+ \ShowNiveaus[length=2,niveau={N1-2,N1-3,N1-4}]
+ \node[above,xshift=4pt] at (N1-2) {[\"UZ1]$^{\transitionstatesymbol}$} ;
+ \node[below] at (N1-3) {ZZ} ;
+ \node[above,xshift=4pt] at (N1-4) {[\"UZ2]$^{\transitionstatesymbol}$} ;
+ \end{endiagram}
+ \quad
+ \begin{endiagram}
+ \ENcurve{2,3,0}
+ \draw[<-,red] (N1-2) -- ++(2,1) node[right] {transition state} ;
+ \end{endiagram}
+\end{example}
+
+\subsection{The Origin}
The nodes \code{(origin-l)} and \code{(origin-r)} are set at the end of the
-environment. This means they are \emph{not} available inside the
-\env{endiagram}{\ldots} environment. If you want to use them you either need to
-look up their coordinates using the \key{debug} option (see
+environment. This means they are \emph{not} available inside the
+\env{endiagram} environment. If you want to use them you either need to look
+up their coordinates using the \option{debug} option (see
page~\pageref{key:debug}) \ldots
-\begin{beispiel}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3[.5],0}
- \draw[dashed,help lines]
- (N1-2) -- (N1-2 -| -1.5,-1)
- node[left,black] {max} ;
-\end{endiagram}
-\end{beispiel}
+
+\begin{example}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3[.5],0}
+ \draw[dashed,help lines]
+ (N1-2) -- (N1-2 -| -1.5,-1)
+ node[left,black] {max} ;
+ \end{endiagram}
+\end{example}
\ldots\ or use this option:
-\begin{beschreibung}
- \Option{tikz}{<tikz>}\Default
- \TikZ options for the \env{endiagram}{\ldots} environment.
-\end{beschreibung}
-With it you can pass arbitrary \TikZ options to the internal \code{tikzpicture}
+\begin{options}
+ \keyval{tikz}{tikz}\Default
+ \TikZ{} options for the \env{endiagram} environment.
+\end{options}
+With it you can pass arbitrary \TikZ{} options to the internal \code{tikzpicture}
environment.
-\begin{beispiel}
-\begin{endiagram}[
- y-label = above,
- tikz = {remember picture}]
- \ENcurve{1,3[.5],0}
-\end{endiagram}
-\tikz[remember picture,overlay]{
- \draw[dashed,help lines]
- (N1-2) -- (N1-2 -| origin-l)
- node[left,black] {max} ;
-}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[
+ y-label = above,
+ tikz = {remember picture}]
+ \ENcurve{1,3[.5],0}
+ \end{endiagram}
+ \tikz[remember picture,overlay]{
+ \draw[dashed,help lines]
+ (N1-2) -- (N1-2 -| origin-l)
+ node[left,black] {max} ;
+ }
+\end{example}
There is an easier way, though: you can use the following command \emph{after}
drawing all curves:
-\begin{beschreibung}
- \Befehl{MakeOrigin}\label{cmd:makeorigin}
-\end{beschreibung}
-
-\begin{beispiel}
-\begin{endiagram}[y-label = above]
- \ENcurve{1,3[.5],0}
- \MakeOrigin
- \draw[dashed,help lines]
- (N1-2) -- (N1-2 -| origin-l)
- node[left,black] {max} ;
-\end{endiagram}
-\end{beispiel}
-
-\section{Axes Ticks and Labels}\secidx{axes ticks and labels}
-\subsection{Automatic Ticks}\ENsetup{AddAxisLabel/font=\fontfamily{fxlf}\selectfont}
+\begin{commands}
+ \command{MakeOrigin}
+ Helper command to make the origin of the coordinate system
+ known.\label{cmd:makeorigin}
+\end{commands}
+
+\begin{example}[side-by-side]
+ \begin{endiagram}[y-label = above]
+ \ENcurve{1,3[.5],0}
+ \MakeOrigin
+ \draw[dashed,help lines]
+ (N1-2) -- (N1-2 -| origin-l)
+ node[left,black] {max} ;
+ \end{endiagram}
+\end{example}
+
+\section{Axes Ticks and Labels}
+\subsection{Automatic Ticks}
+
The $y$ axes can get ticks automatically.
-\begin{beschreibung}
- \Option{ticks}{y|\default{y-l}|y-r|none}\Default{none}
- Adds ticks to the specified axes.
- \Option{ticks-step}{<num>}\Default{1}
- \code{<num>} is a multiple of the \ac{su}. \key{ticks-step}{2} means that
- only every second tick is added.
-\end{beschreibung}
-\begin{beispiel}
-\ENsetup{ticks,y-label=above}
-\begin{endiagram}
- \ENcurve{1,5,2.5,4,0}
-\end{endiagram}
-\begin{endiagram}[ticks-step=2]
- \ENcurve{1,5,2.5,4,0}
-\end{endiagram}
-\end{beispiel}
-These ticks obey the \key{energy-unit} option, see section~\ref{sec:reale_werte}.
-
-\subsection{The \cmd{AddAxisLabel} Command}
-% TODO auf Unterschied zwischen den Ticks produziert durch AddAxisLabel und Option ticks hinweisen
+\begin{options}
+ \keychoice{ticks}{y,\default{y-l},y-r,none}\Default{none}
+ Adds ticks to the specified axes.
+ \keyval{ticks-step}{num}\Default{1}
+ \meta{num} is a multiple of the \ac{su}. \keyis{ticks-step}{2} means that
+ only every second tick is added.
+\end{options}
+\ENsetup{
+ AddAxisLabel/font=\libertineLF
+}
+
+\begin{example}
+ \ENsetup{ticks,y-label=above}
+ \begin{endiagram}
+ \ENcurve{1,5,2.5,4,0}
+ \end{endiagram}
+ \quad
+ \begin{endiagram}[ticks-step=2]
+ \ENcurve{1,5,2.5,4,0}
+ \end{endiagram}
+\end{example}
+These ticks obey the \option{energy-unit} option, see
+section~\ref{sec:reale_werte}.
+
+\subsection{The \cs*{AddAxisLabel} Command}
+% TODO auf Unterschied zwischen den Ticks produziert durch AddAxisLabel und
+% Option ticks hinweisen
To be able to add labels to the ticks there is the command
-\begin{beschreibung}
- \Befehl{AddAxisLabel}[<options>]{(<point1>)[<opt.\@ label>];(<point2>);...}
- \Befehl{AddAxisLabel}*[<options>]{<level1>[<opt.\@ label>];<level2>;...}
-\end{beschreibung}
-As you can see there are two variants. The first one awaits a list of coordinates
-in the \TikZ sense. The second awaits $y$ values. Every of these values has an
-optional argument with which you can specify the label.
-
-The first variant also draws lines between the points specifiad and the $y$ axis.
-Internally this command calls \cmd{MakeOrigin}, see p.\,\pageref{cmd:makeorigin},
-which means it should be used \emph{after} drawing all curves.
+\begin{commands}
+ \command{AddAxisLabel}[\oarg{options}\Marg{(\meta{point1})[\meta{opt.\@
+ label}];(\meta{point2});...}]
+ Add axis labels to points.
+ \command{AddAxisLabel}[\sarg\oarg{options}\Marg{\meta{level1}[\meta{opt.\@
+ label}];\meta{level2};...}]
+ Add axis labels to levels.
+\end{commands}
+As you can see there are two variants. The first one awaits a list of
+coordinates in the \TikZ{} sense. The second awaits $y$ values. Every of
+these values has an optional argument with which you can specify the label.
+
+The first variant also draws lines between the points specifiad and the $y$
+axis. Internally this command calls \cs{MakeOrigin}, see
+page~\pageref{cmd:makeorigin}, which means it should be used \emph{after}
+drawing all curves.
Example for the second variant:
-\begin{beispiel}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1;2;3}
-\end{endiagram}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1[10];2[20];3[30]}
-\end{endiagram}
-\end{beispiel}
+\begin{example}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1;2;3}
+ \end{endiagram}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1[10];2[20];3[30]}
+ \end{endiagram}
+\end{example}
Example for the first variant:
-\begin{beispiel}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel{(N1-1)[$H_1$];(N1-3)[$H_2$]}
-\end{endiagram}
-\end{beispiel}
-
-The optional arguments can also get \TikZ options. The description should read:
-\begin{beschreibung}
- \Befehl{AddAxisLabel}{(<point>)[<opt.\@ label>,<tikz>]}
- \Befehl{AddAxisLabel}*{<level>[<opt.\@ label>,<tikz>]}
-\end{beschreibung}
-
-\begin{beispiel}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1[10];2[20,{draw,fill=green!15}];3[30]}
-\end{endiagram}
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel{(N1-1)[$H_1$];(N1-3)[$H_2$,{draw,font=\color{red},fill=green!15}]}
-\end{endiagram}
-\end{beispiel}
+\begin{example}[side-by-side]
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel{(N1-1)[$H_1$];(N1-3)[$H_2$]}
+ \end{endiagram}
+\end{example}
+
+The optional arguments can also get \TikZ{} options. The description should read:
+\begin{commands}
+ \command{AddAxisLabel}[\oarg{options}\Marg{(\meta{point1})[\meta{opt.\@
+ label},\meta{tikz}];(\meta{point2});...}]
+ Add axis labels to points.
+ \command{AddAxisLabel}[\sarg\oarg{options}\Marg{\meta{level1}[\meta{opt.\@
+ label},\meta{tikz}];\meta{level2};...}]
+ Add axis labels to levels.
+\end{commands}
+
+\begin{example}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1[10];2[20,{draw,fill=green!15}];3[30]}
+ \end{endiagram}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel{(N1-1)[$H_1$];(N1-3)[$H_2$,{draw,font=\color{red},fill=green!15}]}
+ \end{endiagram}
+\end{example}
\subsection{Customization}
+
You have several options to customize the labels:
-\begin{beschreibung}
- \Option[AddAxisLabel]{axis}{y-l|y-r|x}\Default{y-l}
- Choose which axis gets the labels.
- \Option[AddAxisLabel]{connect}{<tikz>}\Default{dashed,help lines}
- Change the style of the lines.
- \Option[AddAxisLabel]{font}{<commands>}\Default
- You can add commands like \verb=\footnotesize= and/or \verb=\color{red}= to
- format the label text.
-\end{beschreibung}
-
-\begin{beispiel}[below]
-\begin{endiagram}[y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel{(2,3)[\"UZ]}
-\end{endiagram}
-\begin{endiagram}[y-label=above,x-label=right]
- \ENcurve{1,3,2}
- \AddAxisLabel[axis=x,connect=dotted]{(2,3)[\"UZ]}
-\end{endiagram}
-\begin{endiagram}[axes=all,y-label=above]
- \ENcurve{1,3,2}
- \AddAxisLabel[axis=y-r,connect=red]{(2,3)[\"UZ]}
-\end{endiagram}
-\end{beispiel}
-\secidx*{axes ticks and labels}
-
-\section{Actual Values}\secidx{actual values}\label{sec:reale_werte}
+\begin{options}
+ \keychoice{axis}{y-l,y-r,x}\Module{AddAxisLabel}\Default{y-l}
+ Choose which axis gets the labels.
+ \keyval{connect}{tikz}\Module{AddAxisLabel}\Default{dashed,help lines}
+ Change the style of the lines.
+ \keyval{font}{commands}\Module{AddAxisLabel}\Default
+ You can add commands like \cs*{footnotesize} and/or \cs*{color}\Marg{red}
+ to format the label text.
+\end{options}
+
+\begin{example}
+ \begin{endiagram}[y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel{(2,3)[\"UZ]}
+ \end{endiagram}
+ \begin{endiagram}[y-label=above,x-label=right]
+ \ENcurve{1,3,2}
+ \AddAxisLabel[axis=x,connect=dotted]{(2,3)[\"UZ]}
+ \end{endiagram}
+ \begin{endiagram}[axes=all,y-label=above]
+ \ENcurve{1,3,2}
+ \AddAxisLabel[axis=y-r,connect=red]{(2,3)[\"UZ]}
+ \end{endiagram}
+\end{example}
+
+\section{Actual Values}\label{sec:reale_werte}
\subsection{The Basics}
+
If you want to have a more quantitative diagram or use actual values for the
energies you can use these options:
-\begin{beschreibung}
- \Option{energy-unit}{<unit>}\Default
- The unit of the energy scale. A unit in the \paket{siunitx} sense.
- \Option{energy-step}{<num>}\Default{1}
- Determines which increment on the energy scale corresponds to the \ac{su}.
- \Option{energy-zero}{<num>}\Default{0}
- Shifts the origin of the energy scale by \code{<num>} in multiples of the
- energy scale.
- \Option{energy-unit-separator}{<anything>}\Default{/}
- Separates the $y$ axes label from the unit.
- \Option{energy-round}{<num>}\Default{3}
- Rounds the value to this number of figures.
- \Option{energy-round-places}{\default{true}|false}\Default{false}
- Switch rounding mode to places.
-\end{beschreibung}
+\begin{options}
+ \keyval{energy-unit}{unit}\Default
+ The unit of the energy scale. A unit in the \pkg{siunitx} sense.
+ \keyval{energy-step}{num}\Default{1}
+ Determines which increment on the energy scale corresponds to the
+ \ac{su}.
+ \keyval{energy-zero}{num}\Default{0}
+ Shifts the origin of the energy scale by \meta{num} in multiples of the
+ energy scale.
+ \keyval{energy-unit-separator}{anything}\Default{/}
+ Separates the $y$ axes label from the unit.
+ \keyval{energy-round}{num}\Default{3}
+ Rounds the value to this number of figures.
+ % \keybool{energy-round-places}\Default{false}
+ % Switch rounding mode to places.
+\end{options}
Choosing a unit will add ticks and labels to the $y$ axis automatically and has
-an impact on the commands \cmd{ShowGain} and \cmd{ShowEa}, see section~\ref{ssec:real_einfluss}.
-
-\begin{beispiel}
-\begin{endiagram}[ticks,y-label=above,energy-step=10]
- \ENcurve{1,3,2}
-\end{endiagram}
-\begin{endiagram}[y-label=above,energy-step=10,energy-zero=30]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1;2;3}
-\end{endiagram}
-\end{beispiel}
-
-\begin{beispiel}
-\begin{endiagram}[y-label=above,energy-step=15,energy-zero=30,energy-unit=\kilo\joule]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1;2;3}
-\end{endiagram}
-\begin{endiagram}[y-label=above,energy-step=10,energy-unit=\kilo\joule,energy-unit-separator={ in }]
- \ENcurve{1,3,2}
- \AddAxisLabel*{1;2;3}
-\end{endiagram}
-\end{beispiel}
-
-\begin{beispiel}
-\ENsetup{energy-unit=kJ,energy-step=10,energy-zero=.613,y-label-offset=20pt}
-\begin{endiagram}
- \ENcurve{1.0613,4.3465,2.9876}
- \ShowGain[label]
-\end{endiagram}
-
-\begin{endiagram}[energy-round-places]
- \ENcurve{1.0613,4.3465,2.9876}
- \ShowGain[label]
-\end{endiagram}
-\end{beispiel}
+an impact on the commands \cs{ShowGain} and \cs{ShowEa}, see
+section~\ref{ssec:real_einfluss}.
+
+\begin{example}
+ \begin{endiagram}[ticks,y-label=above,energy-step=10]
+ \ENcurve{1,3,2}
+ \end{endiagram}
+ \begin{endiagram}[y-label=above,energy-step=10,energy-zero=30]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1;2;3}
+ \end{endiagram}
+\end{example}
+
+\begin{example}
+ \begin{endiagram}[
+ y-label=above,
+ energy-step=15,
+ energy-zero=30,
+ energy-unit=\kilo\joule]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1;2;3}
+ \end{endiagram}
+ \begin{endiagram}[
+ y-label=above,
+ energy-step=10,
+ energy-unit=\kilo\joule,
+ energy-unit-separator={ in }]
+ \ENcurve{1,3,2}
+ \AddAxisLabel*{1;2;3}
+ \end{endiagram}
+\end{example}
+
+\begin{example}
+ \ENsetup{
+ energy-unit=kJ,
+ energy-step=10,
+ energy-zero=.613,
+ y-label-offset=20pt
+ }
+ \begin{endiagram}
+ \ENcurve{1.0613,4.3465,2.9876}
+ \ShowGain[label]
+ \end{endiagram}
+\end{example}
+ % \begin{endiagram}% [energy-round-places]
+ % \ENcurve{1.0613,4.3465,2.9876}
+ % \ShowGain[label]
+ % \end{endiagram}
\subsection{Impact on Other Commands}\label{ssec:real_einfluss}
-Using the option \key{energy-unit} changes the default labels of \cmd{ShowGain}
-and \cmd{ShowEa}. Now an actual value is shown:
-\begin{beispiel}[below]
- % uses \DeclareSIUnit{\calory}{cal}
-\sisetup{per-mode = fraction}
-\ENsetup{
- energy-step = 100,
- energy-unit = \kilo\calory\per\mole,
- energy-unit-separator = { in },
- y-label = above,
- AddAxisLabel/font = \fontfamily{fxlf}\selectfont\footnotesize
-}
-\begin{endiagram}[scale=1.5]
- \ENcurve{2.232,4.174,.308}
- \AddAxisLabel*{0;1;2;3;4}
- \ShowEa[label,connect={draw=none}]
- \ShowGain[label]
-\end{endiagram}
-\end{beispiel}
+
+Using the option \option{energy-unit} changes the default labels of
+\cs{ShowGain} and \cs{ShowEa}. Now an actual value is shown:
+\begin{example}
+ % uses \DeclareSIUnit{\calory}{cal}
+ \sisetup{per-mode = fraction}
+ \ENsetup{
+ energy-step = 100,
+ energy-unit = \kilo\calory\per\mole,
+ energy-unit-separator = { in },
+ y-label = above,
+ AddAxisLabel/font = \libertineLF\footnotesize
+ }
+ \begin{endiagram}[scale=1.5]
+ \ENcurve{2.232,4.174,.308}
+ \AddAxisLabel*{0;1;2;3;4}
+ \ShowEa[label,connect={draw=none}]
+ \ShowGain[label]
+ \end{endiagram}
+\end{example}
This behaviour can be switched off, though:
-\begin{beschreibung}
- \Option{calculate}{\default{true}|false}\Default{true}
-\end{beschreibung}
-\begin{beispiel}
- % uses \DeclareSIUnit{\calory}{cal}
-\sisetup{per-mode = fraction}
-\ENsetup{
- energy-step = 100,
- energy-unit = \kilo\calory\per\mole,
- energy-unit-separator = { in },
- y-label = above,
- AddAxisLabel/font = \footnotesize,
-}
-\begin{endiagram}[scale=1.5,calculate=false]
- \ENcurve{2.232,4.174,.308}
- \AddAxisLabel*{0;1;2;3;4}
- \ShowEa[label,connect={draw=none}]
- \ShowGain[label]
-\end{endiagram}
-\end{beispiel}
-\secidx*{Actual values}
+\begin{options}
+ \keybool{calculate}\Default{true}
+ Switch the calculating of activation energy and energy gain on or off.
+\end{options}
+\begin{example}
+ % uses \DeclareSIUnit{\calory}{cal}
+ \sisetup{per-mode = fraction}
+ \ENsetup{
+ energy-step = 100,
+ energy-unit = \kilo\calory\per\mole,
+ energy-unit-separator = { in },
+ y-label = above,
+ AddAxisLabel/font = \footnotesize,
+ }
+ \begin{endiagram}[scale=1.5,calculate=false]
+ \ENcurve{2.232,4.174,.308}
+ \AddAxisLabel*{0;1;2;3;4}
+ \ShowEa[label,connect={draw=none}]
+ \ShowGain[label]
+ \end{endiagram}
+\end{example}
\section{Example}
-The illustration of the Bell-Evans-Polanyi principle (figure~\ref{fig:bell-evans-polanyi})
-serves as an example for a more complex usage. One reaction is coloured as it
-an exception to the principle. The figure is a reproduction of a similar figure
-in~\cite{brueckner}.
-\begin{beispiel}[code and float]
-% uses the packages `chemmacros', `chemfig' and `libertine'
-\begin{figure}[ht]
-\centering
-\setatomsep{1.5em}
-\DeclareChemIUPAC\iso{\textit{i}}
-\chemsetup[chemformula]{font-family=fxl}
-\ENsetup{
- ENcurve/minima,
- AddAxisLabel/font=\fontfamily{fxlf}\selectfont\footnotesize
-}
-\begin{endiagram}[
- tikz = {yscale=1.5}, scale = 1.7,
- y-label = above, y-label-text = $\Delta H$,
- x-label = right, x-label-text = RK,
- energy-step = 10]
- \ENcurve{0,3.5,1}
- \ENcurve[tikz=red]{0,3.7,.4}
- \ENcurve{0,4.3[.2],2.4}
- \ENcurve{0,4.7[.3],2.7}
- \ENcurve{0,4.9[.35],2.9}
- \ENcurve{0,5.2[.4],3.3}
- \AddAxisLabel*{1;2;3;4;6}
- \AddAxisLabel{(N1-1)[0];(N1-2)[35];(N2-2)[37];(N3-2)[43];(N4-2)[47];(N5-2)[49];(N6-2)[52]}
- \draw[right] (N1-3) ++ (1,0) node {\small \ch{2 "\chemfig{=_[:30]-[::-60]\lewis{0.,}}~" + N2} } ;
- \draw[right,red] (N2-3) ++ (1,-.3) node {\small \ch{2 "\chemfig{[:-60]*6(=-=-(-\lewis{0.,})=-)}~" + N2} } ;
- \draw[right] (N3-3) ++ (1,-.2) node {\small \ch{2 "\tert-\lewis{0.,Bu}~" + N2} } ;
- \draw[right] (N4-3) ++ (1,-.1) node {\small \ch{2 "\iso-\lewis{0.,Pr}~" + N2} } ;
- \draw[right] (N5-3) ++ (1,0) node {\small \ch{2 "\lewis{0.,Et}~" + N2} } ;
- \draw[right] (N6-3) ++ (1,0) node {\small \ch{2 "\lewis{0.,Me}~" + N2} } ;
- \draw[above,font=\fontfamily{fxlf}\selectfont\footnotesize]
- (N1-3) node {10} (N2-3) node[red] {4}
- (N3-3) node {24} (N4-3) node {27}
- (N5-3) node {29} (N6-3) node {33} ;
-\end{endiagram}
-
-\setatomsep{2em}
-\schemestart
- \chemfig{R-[:30]N=N-[:30]R}
- \arrow{->[$\Delta$]}[,2.1]
- \ch{2 "\lewis{0.,R}~" + N2}
-\schemestop
-\caption{\label{fig:bell-evans-polanyi}Enthalpie-Entwicklung entlang
-der Reaktionskoordinate bei einer Serie von Thermolysen aliphatischer
-Azoverbindungen. Alle Thermolysen dieser Serie -- mit Ausnahme der
-farbig hervorgehobenen -- folgen dem Bell-Evans-Polanyi-Prinzip~\cite{brueckner}.}
+
+The illustration of the Bell-Evans-Polanyi principle
+(figure~\ref{fig:bell-evans-polanyi}) serves as an example for a more complex
+usage. One reaction is coloured as it an exception to the principle. The
+figure is a reproduction of a similar figure in~\cite{brueckner}.
+
+\begin{sourcecode}
+ % uses the packages `chemmacros', `chemfig' and `libertine'
+ \setatomsep{1.5em}
+ \DeclareChemIUPAC\iso{\textit{i}}
+ \chemsetup[chemformula]{format=\libertineLF}
+ \ENsetup{
+ ENcurve/minima,
+ AddAxisLabel/font=\libertineLF\footnotesize
+ }
+ \begin{endiagram}[
+ tikz = {yscale=1.5}, scale = 1.7,
+ y-label = above, y-label-text = $\Delta H$,
+ x-label = right, x-label-text = RK,
+ energy-step = 10]
+ \ENcurve{0,3.5,1}
+ \ENcurve[tikz=red]{0,3.7,.4}
+ \ENcurve{0,4.3[.2],2.4}
+ \ENcurve{0,4.7[.3],2.7}
+ \ENcurve{0,4.9[.35],2.9}
+ \ENcurve{0,5.2[.4],3.3}
+ \AddAxisLabel*{1;2;3;4;6}
+ \AddAxisLabel{
+ (N1-1)[0]; (N1-2)[35]; (N2-2)[37]; (N3-2)[43]; (N4-2)[47]; (N5-2)[49];
+ (N6-2)[52]
+ }
+ \draw[right] (N1-3) ++ (1,0)
+ node {\small \ch{2 "\chemfig{=_[:30]-[::-60]\lewis{0.,}}~" + N2} } ;
+ \draw[right,red] (N2-3) ++ (1,-.3)
+ node {\small \ch{2 "\chemfig{[:-60]*6(=-=-(-\lewis{0.,})=-)}~" + N2} } ;
+ \draw[right] (N3-3) ++ (1,-.2)
+ node {\small \ch{2 "\tert-\lewis{0.,Bu}~" + N2} } ;
+ \draw[right] (N4-3) ++ (1,-.1)
+ node {\small \ch{2 "\iso-\lewis{0.,Pr}~" + N2} } ;
+ \draw[right] (N5-3) ++ (1,0)
+ node {\small \ch{2 "\lewis{0.,Et}~" + N2} } ;
+ \draw[right] (N6-3) ++ (1,0)
+ node {\small \ch{2 "\lewis{0.,Me}~" + N2} } ;
+ \draw[above,font=\fontfamily{fxlf}\selectfont\footnotesize]
+ (N1-3) node {10} (N2-3) node[red] {4}
+ (N3-3) node {24} (N4-3) node {27}
+ (N5-3) node {29} (N6-3) node {33} ;
+ \end{endiagram}
+
+ \setatomsep{2em}
+ \schemestart
+ \chemfig{R-[:30]N=N-[:30]R}
+ \arrow{->[$\Delta$]}[,2.1]
+ \ch{2 "\lewis{0.,R}~" + N2}
+ \schemestop
+\end{sourcecode}
+
+\begin{figure}
+ \centering
+ \centering
+ \setatomsep{1.5em}
+ \DeclareChemIUPAC\iso{\textit{i}}
+ \chemsetup[chemformula]{format=\libertineLF}
+ \ENsetup{
+ ENcurve/minima,
+ AddAxisLabel/font=\libertineLF\footnotesize
+ }
+ \begin{endiagram}[
+ tikz = {yscale=1.5}, scale = 1.7,
+ y-label = above, y-label-text = $\Delta H$,
+ x-label = right, x-label-text = RK,
+ energy-step = 10]
+ \ENcurve{0,3.5,1}
+ \ENcurve[tikz=red]{0,3.7,.4}
+ \ENcurve{0,4.3[.2],2.4}
+ \ENcurve{0,4.7[.3],2.7}
+ \ENcurve{0,4.9[.35],2.9}
+ \ENcurve{0,5.2[.4],3.3}
+ \AddAxisLabel*{1;2;3;4;6}
+ \AddAxisLabel{
+ (N1-1)[0]; (N1-2)[35]; (N2-2)[37]; (N3-2)[43]; (N4-2)[47]; (N5-2)[49];
+ (N6-2)[52]
+ }
+ \draw[right] (N1-3) ++ (1,0)
+ node {\small \ch{2 "\chemfig{=_[:30]-[::-60]\lewis{0.,}}~" + N2} } ;
+ \draw[right,red] (N2-3) ++ (1,-.3)
+ node {\small \ch{2 "\chemfig{[:-60]*6(=-=-(-\lewis{0.,})=-)}~" + N2} } ;
+ \draw[right] (N3-3) ++ (1,-.2)
+ node {\small \ch{2 "\tert-\lewis{0.,Bu}~" + N2} } ;
+ \draw[right] (N4-3) ++ (1,-.1)
+ node {\small \ch{2 "\iso-\lewis{0.,Pr}~" + N2} } ;
+ \draw[right] (N5-3) ++ (1,0)
+ node {\small \ch{2 "\lewis{0.,Et}~" + N2} } ;
+ \draw[right] (N6-3) ++ (1,0)
+ node {\small \ch{2 "\lewis{0.,Me}~" + N2} } ;
+ \draw[above,font=\fontfamily{fxlf}\selectfont\footnotesize]
+ (N1-3) node {10} (N2-3) node[red] {4}
+ (N3-3) node {24} (N4-3) node {27}
+ (N5-3) node {29} (N6-3) node {33} ;
+ \end{endiagram}
+
+ \setatomsep{2em}
+ \schemestart
+ \chemfig{R-[:30]N=N-[:30]R}
+ \arrow{->[$\Delta$]}[,2.1]
+ \ch{2 "\lewis{0.,R}~" + N2}
+ \schemestop
+ \caption{\label{fig:bell-evans-polanyi}Enthalpie-Entwicklung
+ entlang der Reaktionskoordinate bei einer Serie von Thermolysen
+ aliphatischer Azoverbindungen. Alle Thermolysen dieser Serie -- mit
+ Ausnahme der farbig hervorgehobenen -- folgen dem
+ Bell-Evans-Polanyi-Prinzip~\cite{brueckner}.}
\end{figure}
-\end{beispiel}
-\clearpage
-{\RaggedRight
-\printbibliography}
+\end{document}
-\setindexpreamble{Section titles are indicated \textbf{bold}, packages
-\textsf{sans serif}, commands \code{\textbackslash\textcolor{code}{brown}},
- options \textcolor{key}{\code{yellow}} and modules \textcolor{module}{\code{blue}}.
- \par\bigskip}
-\printindex
-\end{document} \ No newline at end of file
+\end{document}