rm pagesLTS, now pageslts

git-svn-id: svn://tug.org/texlive/trunk@23535 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 0 insertions, 1235 deletions

diff --git a/Master/texmf-dist/doc/latex/pagesLTS/README b/Master/texmf-dist/doc/latex/pagesLTS/README
deleted file mode 100644
index 68f791dc563..00000000000
--- a/Master/texmf-dist/doc/latex/pagesLTS/README
+++ /dev/null
@@ -1,222 +0,0 @@
-README for pagesLTS package, 2011/03/17, v1.1o
-
-
-TABLE OF CONTENTS
-=================
-
-1 Introduction
-2 Download
-3 Installation
-4 Additional Packages
-5 Package Compatibility
-6 Author/Maintainer
-7 Bug Reports
-8 Known Problems
-
-
-1 INTRODUCTION
-==============
-
-This package puts the labels LastPage (\AtEndDocument) and
-VeryLastPage (\AfterLastShipout) into the .aux file,
-allowing the user to refer to the (very) last page of a
-document. This might be particularly useful in places like
-headers or footers.
-When more than one page numbering scheme is used, these
-references do not give the total number of pages. For this
-case the label LastPages is introduced. Additionally, at the
-last page of each page numbering scheme a label
-pagesLTS.<numbering scheme> is placed, where
-<numbering scheme> is e. g. arabic, roman, Roman, alph, or
-Alph. For fnsymbol please use
-\lastpageref{pagesLTS.fnsymbol} instead of
-\pageref{pagesLTS.fnsymbol}. When the same numbering scheme
-is used twice, the page numbers are either reset to one or
-continued automatically, depending on the option given when
-the package is called. The command \theCurrentPage prints
-the current total/absolute page number - in contrast to
-\thepage, which gives only the page name in the current page
-numbering scheme. \theCurrentPageLocal gives the current
-number of pages in the current page numbering scheme.
-\thepage and \theCurrentPageLocal are different e. g. when
-\addtocounter{pageg}{...} or \setcounter{page}{...} were
-used.
-At the first page of the document a label pagesLTS.0 is
-created. This label can be referred to, too. Further labels
-are provided for special cases.
-The alphalph package is supported, i. e. page numbers alph
-or Alph > 26 and fnyambol > 9 can be used (with according
-options set). Even zero and negative page numbers can be
-used with arabic, alph, Alph, roman, Roman, and fnsymbol
-page numbering (with alphalph package and according
-options).
-\pageref* and \pageref*, for using hyperref but suppressing
-links, are supported.
-
-
-2 DOWNLOAD
-==========
-
-`pagesLTS' is available on CTAN:
-  CTAN:macros/latex/contrib/pageslts/
-
-Also a ZIP file is provided that contains the files, already
-sorted in a TDS tree (should become available on CTAN soon):
-  CTAN:install/macros/latex/contrib/pagesLTS.tds.zip
-
-`CTAN:' means one of the `Comprehensive TeX Archive Network'
-nodes or one of its mirrors. This is explained in
-  http://www.tex.ac.uk/cgi-bin/texfaq2html?label=archives
-
-The CTAN stuff will be mirrored automatically from the
-ftp server, so
-  ftp://ftp.tug.org/pub/tex/pageslts/
-corresponds to
-  CTAN:macros/latex/contrib/pageslts/
-
-
-3 INSTALLATION
-==============
-
-Installation with ZIP file in TDS format
-----------------------------------------
-The ZIP file `pagesLTS.tds.zip' contains the files sorted
-in a TDS tree. Thus you can directly unpack the ZIP file
-inside a TDS tree.
- (See CTAN:tds.zip for an explanation of TDS.)
-Example:
-  cd /...somewhere.../texmf
-  unzip /...downloadpath.../pagesLTS.tds.zip
-Do not forget to refresh the file name database of this
-TDS tree.
-Example:
-  texhash /...somewhere.../texmf
-
-Manual installation
--------------------
-a) Download the pagesLTS files from CTAN or the TUG server.
-   If necessary, unpack them.
-b) Generate the package and driver files:
-     tex pagesLTS.ins
-c) Install the files `*.sty' and `*.cfg' in your TDS tree:
-     cp *.sty *.cfg TDS:tex/latex/pagesLTS/
-   Replace `TDS:' by the prefix of your TDS tree
-   (texmf directory).
-d) Copy the documentation files to
-   "TDS:doc/latex/pagesLTS/":
-   README, pagesLTS.pdf,pagesLTS-example.tex,
-   pagesLTS-example.pdf.
-e) Update the databases if necessary, e. g. for teTeX:
-     mktexlsr .../texmf
-
-
-4 ADDITIONAL PACKAGES
-=====================
-
-Depending on the driver and option settings, pagesLTS loads
-other packages:
-
-For unpacking the pagesLTS.dtx file and constructing the
-documentation it is required:
-- TeXFormat LaTeX2e, 1994/06/01, v2e
-- document class ltxdoc, 2007/11/11, v2.0u,
-    CTAN:macros/latex/base/ltxdoc.dtx
-- package holtxdoc, 2010/04/24, v0.19,
-    CTAN:macros/latex/contrib/oberdiek/holtxdoc.dtx
-- package hypdoc, 2010/03/26, v1.9,
-    CTAN:macros/latex/contrib/oberdiek/hypdoc.dtx
-- package geometry, 2010/09/12, v5.6,
-    CTAN:macros/latex/contrib/geometry/geometry.dtx
-- package ulem, 2010/10/03, (no version number given),
-    CTAN:macros/latex/contrib/ulem/
-
-The pagesLTS.sty for LATEX2e (i. e. all documents using the
- pagesLTS package) requires:
-- TeXFormat LaTeX2e, 1994/06/01, v2e
-- package atveryend, 2010/03/24, v1.5,
-    CTAN:macros/latex/contrib/oberdiek/atveryend.dtx
-- package everyshi, 2001/05/15, v3.00,
-    CTAN:macros/latex/contrib/ms/everyshi.dtx
-- package kvoptions, 2010/02/22, v3.7,
-    CTAN:macros/latex/contrib/oberdiek/kvoptions.dtx
-- package undolabl, 2011/02/01, v1.0h,
-    CTAN:macros/latex/contrib/undolabl/undolabl.dtx
-
-The pagesLTS-example.tex requires the same files as all
- documents using the pagesLTS package, and additionally:
-- package alphalph, 2010/04/18, v2.3,
-    CTAN:macros/latex/generic/oberdiek/alphalph.dtx
-- package lipsum, 2011/02/08, v1.1,
-    CTAN:macros/latex/contrib/lipsum/lipsum.dtx
-- package showkeys, 2007/08/07, v3.15,
-    CTAN:macros/latex/required/tools/showkeys.dtx
-- package hyperref, 2011/02/07, v6.82b,
-    CTAN:macros/latex/contrib/hyperref.zip
-- package pagesLTS, 2011/03/16, v1.1n,
-    CTAN:macros/latex/contrib/pageslts/pagesLTS.dtx
-    (Well, it is the example file for this package, and
-     because you are reading the README for the pagesLTS
-     package, it can be assumed that you already have some
-     version of it - is it the current one?)
-
-which again load other packages
-(see the result of the \listfiles command in the log-file
- of the example).
-
-
-5 PACKAGE COMPATIBILITY
-=======================
-
-* endfloat package
-  pagesLTS is not compatible with very old versions of
-  endfloat(2.0 and older).
-  Just get the recent version of the endfloat package
-  from CTAN.
-
-* lastpage package
-  \usepackage[pagecontinue=false]{pagesLTS}
-  can simulate the behaviour of the lastpage package.
-  Loading old (!) versions of the lastpage package before
-  the pagesLTS package before the hyperref package results
-  in multiply definitions of the LastPage label.
-
-* undolabl package
-  Version >= 1.0h is needed.
-
-6 AUTHOR/MAINTAINER
-=====================
-
-* Hans-Martin Münch
-
-
-7 BUG REPORTS
-==============
-
-A bug report should contain:
-* Comprehensive problem description. This includes error or
-  warning messages.
-  * \errorcontextlines=\maxdimen can be added in the
-    TeX code to get more informations in TeX error messages.
-* Minimal test file that shows the problem, but does not
-  contain any unnecessary packages and code.
-* Used drivers/programs.
-* Version information about used packages and programs.
-  * If you are using LaTeX, then add "\listfiles". Then
-    a list of version informations is printed at the end
-    of the LaTeX run.
-* Please no other files than the minimal test file.
-  The other files .log, .dvi, .ps, .pdf are seldom
-  necessary, so send them only on request.
-* Please .zip or .tar.gz your file(s) before sending them!
-
-Bug address
------------
-Bug reports can be send to the maintainer:
-  Hans-Martin Münch
-  <Martin [dot] Muench [at] Uni-Bonn [dot] de>
-
-
-8 KNOWN PROBLEMS
-=================
-
-* as yet: none...
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.pdf b/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.pdf
deleted file mode 100644
index 8100e7a1203..00000000000
--- a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.tex b/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.tex
deleted file mode 100644
index db934cac04b..00000000000
--- a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS-example.tex
+++ /dev/null
@@ -1,1013 +0,0 @@
-%%
-%% This is file `pagesLTS-example.tex',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% pagesLTS.dtx  (with options: `example')
-%% 
-%% This is a generated file.
-%% 
-%% IMPORTANT NOTICE:
-%% On the first page backslash pagenumbering should be called
-%% (with the appropriate argument out of e.g.
-%%  * roman    - Lowercase Roman numerals: i, ii, iii, iv,...
-%%  * Roman    - Uppercase Roman numerals: I, II, III, IV,...
-%%  * arabic   - Arabic numerals: 1, 2, 3, 4,...
-%%  * alph     - Lowercase letters: a, b, c, d,...
-%%  * Alph     - Uppercase letters: A, B, C, D,...
-%%  * fnsymbol - Footnote symbols: *, ^^86 (ddagger), ^^87 (dddagger),
-%%                                  ^^a7 (mathsection),...
-%% ). The command backslash pagenumbering is renewed, but no change
-%% should be visible to the output text, because only labels are added.
-%% backslash OrigPagenumbering can be used to get the original meaning
-%% of backslash pagenumbering, but in that case this package does not
-%% see the change in the page numbering scheme and will make mistakes.
-%% The package takes options.
-%% 
-%% The usual disclaimers apply:
-%% If it doesn't work right that's your problem.
-%% (Nevertheless, send an e-mail to the maintainer
-%%  when you find an error in this package.)
-%% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either
-%% version 1.3c of this license or (at your option) any later
-%% version. This version of this license is in
-%%    http://www.latex-project.org/lppl/lppl-1-3c.txt
-%% and the latest version of this license is in
-%%    http://www.latex-project.org/lppl.txt
-%% and version 1.3c or later is part of all distributions of
-%% LaTeX version 2005/12/01 or later.
-%% 
-%% This work has the LPPL maintenance status "maintained".
-%% 
-%% The Current Maintainer of this work is H.-Martin Muench
-%% (Martin dot Muench at Uni-Bonn dot de).
-%% 
-%% This package first started as a revision of the lastpage
-%% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org),
-%% but it became obviouse that a replacement was needed.
-%% 
-%% This work consists of the main source file pagesLTS.dtx
-%% and the derived files
-%%    pagesLTS.sty, pagesLTS.pdf, pagesLTS.ins, pagesLTS.drv,
-%%    pagesLTS-example.tex.
-%% 
-\documentclass[british]{article}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\usepackage{alphalph}[2010/04/18]% v2.3
-\usepackage{lipsum}[2011/02/08]% v1.1
-\usepackage[draft]{showkeys}[2007/08/07]% v3.15
-%%      Use final instead of draft to hide the keys. %%
-\usepackage{hyperref}[2011/03/09]% v6.82d
-\hypersetup{%
- extension=pdf,%
- plainpages=false,%
- pdfpagelabels=true,%
- hyperindex=false,%
- pdflang={en},%
- pdftitle={pagesLTS package example},%
- pdfauthor={Hans-Martin Muench},%
- pdfsubject={Example for the pagesLTS package},%
- pdfkeywords={LaTeX, pagesLTS, Hans-Martin Muench},%
- pdfview=Fit,%
- pdfstartview=Fit,%
- pdfpagelayout=SinglePage,%
- bookmarksopen=true%
-}
-\usepackage[pagecontinue=true,alphMult=ab,AlphMulti=AB,fnsymbolmult=true,romanMult=true,RomanMulti=true]{pagesLTS}[2011/03/17]% v1.1o
-%% These are the default options. %%
-\makeatletter
-  \renewcommand{\@evenfoot}%
-   {Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
-    \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
-    \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
-    \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
-    \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
-    \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
-    \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
-    \lastpageref{LastPages} pages.%
-   }
-  \renewcommand{\@oddfoot}{\@evenfoot}
-  \def\pagesLTSexampleArabic{3}
-  \def\pagesLTSexamplealph{23}
-  \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}%
-\makeatother
-\listfiles
-\begin{document}
-\pagenumbering{roman}
-%% Note the first \pagenumbering immediately behind \begin{document}. %%
-
-%%\addtocounter{page}{-2} %%
-
-\section*{Example for pagesLTS}
-\addcontentsline{toc}{section}{Example for pagesLTS}
-\markboth{Example for pagesLTS}{Example for pagesLTS}
-
-This example demonstrates the most common uses of package\\
-\textsf{pagesLTS}, v1.1o as of 2011/03/17 (HMM).\\
-The used options were \texttt{pagecontinue=true},
-\texttt{alphMult=ab}, \texttt{AlphMulti=AB}, \linebreak
-\texttt{fnsymbolmult=true},
-\texttt{romanMult=true}, and \texttt{RomanMulti=true}
-(the default ones).\\
-For more details please see the documentation!\\
-
-\label{keys} To hide the \pageref{keys}{\qquad } use option
-\texttt{final} instead of \texttt{draft} with the \textsf{showkeys}
-package (or remove the package call from the preamble of
-this document).\\
-
-\textbf{Hyperlinks or not:} If the \textsf{hyperref} package is loaded,
-the references are also hyperlinked:\\
-\smallskip
-Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
-\lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + %
-\lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + %
-\lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + %
-\lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + %
-\lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + %
-\lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = %
-\lastpageref{LastPages} pages.\\
-If the \textsf{hyperref} package is loaded, but the hyperlinks of the
-references shall be suppressed, \texttt{\textbackslash pageref*\{...\}}
-and \texttt{\textbackslash lastpageref*\{...\}} can be used:\\
-Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
-\lastpageref*{pagesLTS.roman}(\lastpageref*{pagesLTS.roman.local}) + %
-\lastpageref*{pagesLTS.Roman}(\lastpageref*{pagesLTS.Roman.local}) + %
-\lastpageref*{pagesLTS.arabic}(\lastpageref*{pagesLTS.arabic.local}) + %
-\lastpageref*{pagesLTS.fnsymbol}(\lastpageref*{pagesLTS.fnsymbol.local}) + %
-\lastpageref*{pagesLTS.alph}(\lastpageref*{pagesLTS.alph.local}) + %
-\lastpageref*{pagesLTS.Alph}(\lastpageref*{pagesLTS.Alph.local}) = %
-\lastpageref*{LastPages} pages.\\
-
-\textbf{Trademarks} appear throughout this example without any
-trademark symbol; they are the property of their respective
-trademark owner. There is no intention of infringement; the
-usage is to the benefit of the trademark owner.\\
-
-\textbf{Tip}: Use \textit{logical page numbers} for
-the display of the pdf!\\
-(In Adobe Reader X (10.0.1): \underline{E}dit $>$
-Prefere\underline{n}ces (Ctrl+k) $>$ Page Display $>$
-Page Content and Information $>$ Use logical page
-\nolinebreak{\underline{n}umbers.)}\\
-
-You want negative page numbers? Not only arabic, but even roman,
-Roman, alph, Alph or fnsymbol ones? No problem, e.\,g. just give a\\
-\texttt{\textbackslash addtocounter\{page\}\{- \textit{some number}\}}
-in the source code of this example file (or uncomment the prepared
-line)!
-
-\bigskip
-
-Save per page about $200\unit{ml}$ water, $2\unit{g}$ CO$_{2}$
-and $2\unit{g}$ wood:\\
-Therefore please print only if this is really necessary.
-
-\pagebreak
-
-\tableofcontents
-
-\newpage
-
-\pagenumbering{roman}
- % in case the page numbering is changed before,
- % otherwise pagesLTS.current.local.roman on this page
- % would be undefined
-
-\section{roman}
-
-\noindent (\texttt{roman} page numbering was started before,
-becaue the page numbering scheme was needed to start at
-the first page, of course.)\\
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
-\lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-You can get this also in other formats:
-\roman{CurrentPage}, \Roman{CurrentPage}, \arabic{CurrentPage},
-\fnsymbol{CurrentPage}, \alph{CurrentPage}, \Alph{CurrentPage}.
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-You can get also this in other formats, too:
-\roman{pagesLTS.current.local.roman}, \Roman{pagesLTS.current.local.roman},
-\arabic{pagesLTS.current.local.roman}, \fnsymbol{pagesLTS.current.local.roman},
-\alph{pagesLTS.current.local.roman}, \Alph{pagesLTS.current.local.roman},
-but probably it only makes sense if page numbering scheme and format are
-the same, e.\,g.\\
-\texttt{\textbackslash Roman\{pagesLTS.current.local.Roman\}}\\
-or \texttt{\textbackslash Alph\{pagesLTS.current.local.Alph\}}.\ %
-\texttt{\textbackslash arabic\{\ldots \}}\ could make sense
-even if combined with another page numbering scheme.
-And this is exactly what \texttt{\textbackslash theCurrentPageLocal} does:\\
-\nolinebreak{\texttt{\textbackslash def\textbackslash theCurrentPageLocal%
-\{\textbackslash arabic\{pagesLTS.current.local.\textbackslash pagesLTS@pnc\}\}}.}\\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-When the option \texttt{pagecontinue=false} is used with the
-\textsf{pagesLTS} package, the
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} will point
-to the same page as before, but this will have a lower number.\\
-The \texttt{\textbackslash lastpageref\{pagesLTS.Roman.local\}}
-will not change, because the number of pages does not change
-(only the page numbers).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{lastpage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-3]
-
-\newpage
-
-\pagenumbering{Roman}
-
-\section{Roman\label{Roman}}
-\subsection{Common Roman page numbering}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
-\lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-4]
-
-\newpage
-
-\subsection{Last page of first Roman sector}
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
-refer to this page (but there: \lastpageref{pagesLTS.Roman}),
-because the option \texttt{pagecontinue=true}
-was chosen. When a reference to this page is wanted,\\
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman.1\}}
-can be used: \lastpageref{pagesLTS.Roman.1}.\\
-
-\bigskip
-There are \lastpages{Roman}{1}~pages
-(\texttt{\textbackslash lastpages\{Roman\}\{1\}})
-in this first Roman sector.\\
-The Roman page numbering scheme is continued later in
-section~\ref{Roman2})!
-
-\newpage
-
-\pagenumbering{arabic}
-
-\section{arabic}
-
-\subsection{Standard page numbering}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
-\lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-4]
-\newpage
-
-\subsection[Empty page style]{Also an empty page style is no problem\ %
-for the current or total page count}
-
-\bigskip
-
-\thispagestyle{empty}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
-\lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-4]
-
-\newpage
-
-\subsection[addtocounter, setcounter]{Neither\ %
-\texttt{\textbackslash addtocounter\{page\}} or\ %
-\texttt{\textbackslash setcounter\{page\}} is a problem for the\ %
-current or total page numbers}
-
-(Here is an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}}
-in the source code.)\\
-\addtocounter{page}{\pagesLTSexampleArabic}
-
-\noindent The page (from \texttt{\textbackslash thepage} command): \thepage \\
-
-\noindent Current page (from \texttt{\textbackslash theCurrentPage}\ %
-command), i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (from \texttt{\textbackslash theCurrentPageLocal}\ %
-command), i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal\\
-
-\noindent Last page's number (LastPages): \lastpageref{LastPages}{\hskip3em }
-(= total number of pages)\\
-
-\lipsum[1-7]
-
-\newpage
-
-\pagenumbering{fnsymbol}
-
-\section{fnsymbol}
-
-Adobe Reader X (10.0.1) does not show the correct page names
-for all pages with \texttt{fnsymbol} page numbering scheme:
-
-\begin{center}
-\begin{tabular}{c|c|c|c|c}
-page   & page & \multicolumn{2}{c|}{shown by the Reader}                     & with \textsf{alphalph} package and         \\
-number & name & without       & with                                         & with \textsf{pagesLTS} package             \\
-       &      & \multicolumn{2}{c|}{\textsf{alphalph} \&\ \textsf{pagesLTS}} & with \texttt{fnsymbolmult} option   \\ \hline
-$-2$ & \texttt{LaTeX Error}                &          & \ensuremath  {-\ } & \ensuremath  {- \dagger }                    \\
-$-1$ & \texttt{LaTeX Error}                &          & \ensuremath  {- *} & \ensuremath  {- *}                           \\
- $0$ & (ignored by \LaTeX)                 &          & 0                  & 0                                            \\
- $1$ & \ensuremath  {*}                    & *        & \ensuremath  {*}   & \ensuremath  {*}                             \\
- $2$ & \ensuremath  {\dagger }             &          &                    & \ensuremath  {\dagger }                      \\
- $3$ & \ensuremath  {\ddagger }            &          &                    & \ensuremath  {\ddagger }                     \\
- $4$ & \ensuremath  {\mathsection }        &          &                    & \ensuremath  {\mathsection }                 \\
- $5$ & \ensuremath  {\mathparagraph }      &          &                    & \ensuremath  {\mathparagraph }               \\
- $6$ & \ensuremath  {\delimiter "026B30D } & "026B30D & \ensuremath  {**}  & \ensuremath  {**}                            \\
- $7$ & \ensuremath  {**}                   & **       &                    & \ensuremath  {\dagger \dagger }              \\
- $8$ & \ensuremath  {\dagger \dagger }     &          &                    & \ensuremath  {\ddagger \ddagger }            \\
- $9$ & \ensuremath  {\ddagger \ddagger }   &          &                    & \ensuremath  {\mathsection \mathsection }    \\
-$10$ & \texttt{LaTeX Error}                &          &                    & \ensuremath  {\mathparagraph \mathparagraph }\\
-$11$ & \texttt{LaTeX Error}                &          & \ensuremath  {***} & \ensuremath  {***}                           \\
-$12$ & \texttt{LaTeX Error}                &          &                    & \ensuremath  {\dagger \dagger \dagger }      \\
-\end{tabular}
-\end{center}
-
-\noindent and so on, while at least the (\ldots\ of \ldots ) part
-of the page number is displayed correctly.\\
-
-\bigskip
-
-Without option \texttt{fnsymbolmult=true} of the \textsf{pagesLTS} package
-(and the help of Heiko Oberdiek's \textsf{alphalph} package),
-after page~9
-(\textquotedblleft \ensuremath {\ddagger \ddagger }\textquotedblright )
-(and also for negative page numbers) there would just appear a
-\begin{quote}
-\begin{verbatim}
-LaTeX Error: Counter too large
-See the LaTeX manual or LaTeX Companion for explanation.
-You've lost some text.  Try typing  <return>  to proceed.
-If that doesn't work, type  X <return>  to quit.
-\end{verbatim}
-\end{quote}
-Now the page numbers after 5 (\ensuremath  {\mathparagraph }) are
-continued  with the doubled \textquotedblleft number\textquotedblright\ of
-the first, second, third,\ldots\ page (\ensuremath  {**},
-\ensuremath  {\dagger \dagger }, \ensuremath  {\ddagger \ddagger },
-\ensuremath  {\mathsection \mathsection },
-\ensuremath  {\mathparagraph \mathparagraph }),
-and after the tenth page the \textquotedblleft number\textquotedblright\ is
-tripled (\ensuremath  {***}, \ensuremath  {\dagger \dagger \dagger },\ldots).
-Page zero is named 0 and negative pages just named like the positive ones
-with addition of a minus sign~($-$).
-
-\bigskip
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
-\lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-60]
-
-\newpage
-
-\pagenumbering{Roman}
-
-\section{Roman - again!\label{Roman2}}
-
-The page number would start with
-\textquotedblleft I\textquotedblright\ again -- but
-for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
-or with option just \texttt{pagecontinue}, or even just
-\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
-This package remembered the
-(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
-you have to compute this value for yourself, but\ %
-subtracting one should be managable for \TeX nicians.} pages already
-done in Roman output, and therefore continues with page
-\textquotedblleft \thepage \textquotedblright .\\
-If you want to start with \textquotedblleft I\textquotedblright\ all
-over again, you will have two pages with the same name,
-but nevertheless you can do this by using option \texttt{pagecontinue=false}
-or a \texttt{\textbackslash setcounter\{page\}\{1\}}\ here
-(not demonstrated in this example file).\\
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
- \lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-6]
-
-\newpage
-
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}} does \textbf{not}
-refer to this page (but there: \lastpageref{pagesLTS.Roman}),
-because the option \texttt{pagecontinue=true}
-was chosen. When a reference to this page is wanted,\\
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman.2\}}
-can be used: \lastpageref{pagesLTS.Roman.2}.\\
-
-\bigskip
-There are \lastpages{Roman}{2}~pages
-(\texttt{\textbackslash lastpages\{Roman\}\{2\}})
-in this second Roman sector.\\
-The Roman page numbering scheme is continued later in
-section~\ref{Roman3})!
-
-\newpage
-
-\pagenumbering{alph}
-
-\section{alph\label{alph}}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
- \lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-4]
-
-\newpage
-
-Without option \texttt{alphMult=ab} of the \textsf{pagesLTS} (and the help of
-Heiko Oberdiek's \textsf{alphalph} package), after page
-\textquotedblleft z\textquotedblright\ there would just appear a
-\begin{quote}
-\begin{verbatim}
-LaTeX Error: Counter too large
-See the LaTeX manual or LaTeX Companion for explanation.
-You've lost some text.  Try typing  <return>  to proceed.
-If that doesn't work, type  X <return>  to quit.
-\end{verbatim}
-\end{quote}
-Now the page numbers are continued aa, ab, ac,\ldots\ (aa, bb, cc,\ldots\ is
-also possible, see the \textsf{pagesLTS} documentation).\\
-To demonstrate this, we add a\\
-\texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}}\\
-in the source code here.
-
-\addtocounter{page}{\pagesLTSexamplealph}
-
-\bigskip
-
-\lipsum[1-18]
-
-\newpage
-
-\pagenumbering{Roman}
-
-\section{Roman - third time!\label{Roman3}}
-
-The page number would start with
-\textquotedblleft I\textquotedblright\ again -- but
-for the \textsf{pagesLTS} package (with option \texttt{pagecontinue=true},
-or with option just \texttt{pagecontinue}, or even just
-\nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}).
-This package remembered the
-(\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here\ %
-you have to compute this value for yourself, but\ %
-subtracting one should be managable for \TeX nicians.} pages already
-done in Roman output, and therefore continues with page
-\textquotedblleft \thepage \textquotedblright .\\
-If you want to start with \textquotedblleft I\textquotedblright\ all
-over again, you will have (at least) two pages with the same name,
-but nevertheless you can do this by using option
-\texttt{pagecontinue=false} instead of \texttt{pagecontinue=true}
-(not demonstrated here).\\
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
- \lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-3]
-
-\newpage
-
-\lastpageref{pagesLTS.Roman}
-(\texttt{\textbackslash lastpageref\{pagesLTS.Roman\}})
-\textbf{does} refers to this page, because the option
-\texttt{pagecontinue=true} was chosen. Also\\
-\texttt{\textbackslash lastpageref\{pagesLTS.Roman.3\}}
-can be used: \lastpageref{pagesLTS.Roman.3}.\\
-
-\bigskip
-
-There are \lastpages{Roman}{3}~pages
-(\texttt{\textbackslash lastpages\{Roman\}\{3\}})
-in this third Roman sector.\\
-
-\newpage
-
-\pagenumbering{Alph}
-
-\section{Alph}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
- \lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\lipsum[1-3]
-
-Without option \texttt{alphMulti=AB} of the \textsf{pagesLTS} (and the help of
-Heiko Oberdiek's \textsf{alphalph} package), after page
-\textquotedblleft Z\textquotedblright\ there would just appear a
-\begin{quote}
-\begin{verbatim}
-LaTeX Error: Counter too large
-See the LaTeX manual or LaTeX Companion for explanation.
-You've lost some text.  Try typing  <return>  to proceed.
-If that doesn't work, type  X <return>  to quit.
-\end{verbatim}
-\end{quote}
-Now the page numbers are continued AA, AB, AC,\ldots\ (AA, BB, CC,\ldots\ is
-also possible, see the \textsf{pagesLTS} documentation).\\
-This is not demonstrated here, but see section~\ref{alph}.
-
-\newpage
-
-\section{The End}
-
-\noindent First page (\texttt{\textbackslash lastpageref\{pagesLTS.0\}}):
- \lastpageref{pagesLTS.0}\\
-
-\noindent The page (\texttt{\textbackslash thepage}): \thepage \\
-
-\noindent Current page (\texttt{\textbackslash theCurrentPage}),
-i.\,e. counted continuously from the first page): \theCurrentPage \\
-
-\noindent CurrentPageLocal (\texttt{\textbackslash theCurrentPageLocal}),
-i.\,e. counted continuously from the first page of the
-current page numbering sheme): \theCurrentPageLocal \\
-
-\noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em }
-(There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\
-
-\noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em }
-(There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\
-\lastpages{Roman}{1}~pages in the first Roman sector
-(\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\
-\lastpages{Roman}{2}~pages in the second Roman sector
-(\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\
-\lastpages{Roman}{3}~pages in the third Roman sector
-(\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\
-
-\noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em }
-(There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexampleArabic\}} was used.)\\
-
-\noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\
-(\texttt{\textbackslash lastpageref\{pagesLTS.fnsymbol\}} -- never
-\texttt{\textbackslash pageref\{pagesLTS.fnsymbol\}}!)\\
-(There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\
-
-\noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em }
-(There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers,
-because an \texttt{\textbackslash addtocounter\{page\}\{\pagesLTSexamplealph\}} was used.)\\
-
-\noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em }
-(There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\
-
-\noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\
-
-\noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\
-(\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless
-a package with output \linebreak
-\texttt{\textbackslash AtEndDocument} after the \textsf{pagesLTS} package
-was added.)\\
-
-\noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em }
-(=~total number of pages)\\
-
-\medskip
-
-\noindent Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of %
-\lastpageref{pagesLTS.roman} (\lastpageref{pagesLTS.roman.local}) + %
-\lastpageref{pagesLTS.Roman} (\lastpageref{pagesLTS.Roman.local}) + %
-\lastpageref{pagesLTS.arabic} (\lastpageref{pagesLTS.arabic.local}) + %
-\lastpageref{pagesLTS.fnsymbol} (\lastpageref{pagesLTS.fnsymbol.local}) + %
-\lastpageref{pagesLTS.alph} (\lastpageref{pagesLTS.alph.local}) + %
-\lastpageref{pagesLTS.Alph} (\lastpageref{pagesLTS.Alph.local}) = %
-\lastpageref{LastPages} pages.
-
-\end{document}
-\endinput
-%%
-%% End of file `pagesLTS-example.tex'.
diff --git a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS.pdf b/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS.pdf
deleted file mode 100644
index ad34e958db2..00000000000
--- a/Master/texmf-dist/doc/latex/pagesLTS/pagesLTS.pdf
+++ /dev/null