rename jsmisc to js-misc per Catalogue

git-svn-id: svn://tug.org/texlive/trunk@16211 c570f23f-e606-0410-a88d-b1316a301751

16 files changed, 1922 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/plain/js-misc/History b/Master/texmf-dist/doc/plain/js-misc/History
new file mode 100644
index 00000000000..dfa7bbf787e
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/History
@@ -0,0 +1,25 @@
+plain/js-misc/History				30 Jul 95  -*- Indented-Text -*-
+---------------------------------------------------------------------------
+
+
+	deutsch.tex uses german.sty. (With babel 3.5, germanb.sty
+	cannot be used with plain TeX any more.) [1]
+
+
+Version 1.3	07 May 95
+
+	xfig.tex handles \SetFigFont variants (from transfig versions
+	2.1 & 3.1) automatically.
+
+
+Version 1.2	17 Apr 95
+
+	Typo in sperr.tex prevented it from working.
+
+	Don't allocate registers in xfig.tex globally, to allow
+	reading it several times in a group.
+
+
+Version 1.1	16 Mar 95
+
+	First public release.
diff --git a/Master/texmf-dist/doc/plain/js-misc/INSTALL b/Master/texmf-dist/doc/plain/js-misc/INSTALL
new file mode 100644
index 00000000000..540e67301ce
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/INSTALL
@@ -0,0 +1,65 @@
+$Id: INSTALL,v 1.1 1995/03/16 01:18:22 schrod Exp $
+------------------------------------------------------------
+
+These instructions are written for the installation of this package on
+a TDS-compliant TeX system. (TDS is the forthcoming standard for TeX
+installations, refer to ftp.th-darmstadt.de:/pub/tex/TDS-compliant/draft/
+for more information.) If you don't have such a system, you have to
+figure out your directory names yourself.
+
+If you're on a Unix system and want to use make for installation, read
+further. Otherwise skip forward to ``MANUAL INSTALLATION''.
+
+
+------------------------------------------------------------
+INSTALLATION BY MAKE:
+
+Edit the Makefile and adapt the values of the following variables to
+your system. Sorry, but the values are not collected at the top of the
+Makefile, use your editor to locate them. (The Makefile is generated
+by Imake, I don't touch it... :-)
+
+    MAKEDIR	[Default: mkdir -p]
+		A command to create a directory, including all
+		non-existent intermediate ones.
+
+    DESTDIR	[Default is empty]
+		This is a prefix that's prepended in front of all
+		destination directories, in case your installation
+		structure is somewhere else than your run-time
+		location.
+
+    INSTALL	[Default depends on the machine I generated the distribution]
+		A BSD install program.
+		If you have a System V Unix, and you have X11, you can
+		use a script named bsdinst.sh or bsdinst or
+		install.sh that's located your X11 bin directory.
+		If you don't have a BSD install program, you must use
+		the manual installation, described below.
+
+    TEXMF	[Default: /usr/local/lib/texmf]
+		The root of your (TDS) TeX tree.
+
+Now, type "make install" and everything should be OK.
+
+
+
+------------------------------------------------------------
+MANUAL INSTALLATION:
+
+
+The Imakefile features definitions that look like
+InstallTeX<category>(<package>,<files>).
+
+Copy all <files> to a directory that is appropriate for this
+<category> and this <package>. (The <category> `Generic' denotes macro
+files that can be used with many TeX formats, including plain TeX,
+LaTeX, and AmS-TeX.)
+    The TDS directory names are $TEXMF/tex/<category>/<package>/,
+where $TEXMF is your TDS root directory and <category> is
+all-lowercase.
+
+
+------------------------------------------------------------
+# LocalWords:  tex MAKEDIR DESTDIR bsdinst sh usr lib texmf Imakefile AmS
+# LocalWords:  InstallTeX
diff --git a/Master/texmf-dist/doc/plain/js-misc/Imakefile b/Master/texmf-dist/doc/plain/js-misc/Imakefile
new file mode 100644
index 00000000000..4592d64acc9
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/Imakefile
@@ -0,0 +1,96 @@
+XCOMM $Id: Imakefile,v 1.5 1995/05/28 00:30:55 schrod Exp $
+/* ---------------------------------------------------------------------- */
+
+/*
+ * Imakefile for plain TeX macro package `js-misc'
+ *
+ * (history at end)
+ */
+
+
+/* needed modules */
+#include <install/TeX.imk>
+#include <makeprog.imk>
+#include <TeX.imk>
+
+XCOMM ------------------------------------------------------------
+XCOMM continue in Imakefile
+
+
+/*
+ * The plain TeX package `js-misc' consists of the following macro files:
+ *
+ *     cassette		-- Labels for audio cassettes
+ *     deutsch		-- German texts with plain TeX
+ *     idverb		-- Verbatim identifiers a la WEB
+ *     names.sty	-- Logos
+ *     schild		-- Make a label (for doors, books, etc.)
+ *     sperr		-- Letterspace text (but don't steel sheep...)
+ *     xfig		-- Incorporate xfig output in plain TeX documents
+ */
+
+#ifdef ITI_Site
+    DESTDIR = /archives/tex/Install
+#endif
+
+InstallTeXPlain(js-misc,cassette.tex deutsch.tex idverb.tex \
+			schild.tex sperr.tex xfig.tex)
+InstallTeXGeneric(misc,names.sty)
+InstallTeXDoc(plain,js-misc.dvi)
+
+
+MpDoc2TeXTarget(deutsch,tex)
+MpDoc2TeXTarget(idverb,tex)
+
+TeXTarget(ftex,js-misc)
+
+
+/*
+ * creating a source-distribution of this macro package
+ */
+
+TeXFileTarget(tex,deutsch,doc)
+TeXFileTarget(tex,idverb,doc)
+
+export:: deutsch.dvi idverb.dvi
+	$(MAKE) all
+	$(RM) *.log
+
+/* This will get a module, too. */
+export::
+	touch site.imk
+	$(MAKE) Makefile IMAKE_INCLUDES=-I.
+	$(RM) -r site.imk Makefile.bak
+	cp $(HOME)/Notes/Copying.gpl License
+	pwd=`pwd` ; pwd=`suffix $$pwd /` ; cd .. ; \			@@\
+	    gtar -czvf $$pwd.tar.gz \					@@\
+		--exclude=CVS --exclude=.cvsignore $$pwd ; \		@@\
+	    cp $$pwd/README $$pwd.README
+
+
+/* ============================================================
+ *
+ * $Log: Imakefile,v $
+ * Revision 1.5  1995/05/28  00:30:55  schrod
+ *     On export, exclude CVS files by gtar options, not be removing
+ * them. Do also export the README file.
+ *
+ * Revision 1.4  1995/04/16  23:21:04  schrod
+ *     Moved itinames.sty & TH viscards to plain-iti package.
+ *
+ * Revision 1.3  1995/03/16  02:22:12  schrod
+ *     Export also DVI versions of DOC files.
+ *
+ * Revision 1.2  1995/03/16  01:17:45  schrod
+ *     Use TeX module.
+ *     Add export target.
+ *
+ * Revision 1.1  1995/03/13  23:18:09  schrod
+ *     Started to manage this package with CVS. Made minor code cleanup.
+ *
+
+ * ------------------------------------------------------------
+ * Local Variables:
+ * mode: Indented-Text
+ * End:
+ */
diff --git a/Master/texmf-dist/doc/plain/js-misc/License b/Master/texmf-dist/doc/plain/js-misc/License
new file mode 100644
index 00000000000..a43ea2126fb
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/License
@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                          675 Mass Ave, Cambridge, MA 02139, USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	Appendix: How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/Master/texmf-dist/doc/plain/js-misc/Makefile b/Master/texmf-dist/doc/plain/js-misc/Makefile
new file mode 100644
index 00000000000..492717b7700
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/Makefile
@@ -0,0 +1,288 @@
+# Makefile generated by imake - do not edit!
+# $XConsortium: imake.c,v 1.91 95/01/12 16:15:47 kaleb Exp $
+
+# $ITI: Imake.tmpl,v 1.5 1995/01/24 17:48:12 schrod Exp $
+#----------------------------------------------------------------------
+# Makefile generated from "Imake.tmpl" and <Imakefile>
+#
+# Top level imake template of `Imake module edition'.
+#
+
+default: all
+
+# ======================================================================
+# MIT & XFree configuration files
+# $ITI: MIT-config.imk,v 1.3 1994/12/19 19:16:35 schrod Exp $
+
+# -------------------------------------------------------------------------
+# site-specific configuration parameters that need to come before
+# the platform-specific parameters - edit site.def to change
+
+# $ITI: site.def,v 1.7 1995/03/27 14:41:35 herr Exp $
+#
+# ITI site definitions
+#
+# starting from original MIT version
+
+# site:  $XConsortium: site.def,v 1.2 91/07/30 20:26:44 rws Exp $
+
+# -------------------------------------------------------------------------
+# platform-specific configuration parameters - edit x386.cf to change
+
+# $ITI: x386.cf,v 1.3 1994/06/30 17:03:54 schrod Exp $
+# $XFree86: mit/config/x386.cf,v 2.44 1994/04/16 04:20:56 dawes Exp $
+# platform:  $XConsortium: x386.cf,v 1.7 91/08/16 19:30:10 gildea Exp $
+
+# operating system:  Linux
+
+# -------------------------------------------------------------------------
+# site-specific configuration parameters that go after
+# the platform-specific parameters - edit site.def to change
+
+# $ITI: site.def,v 1.7 1995/03/27 14:41:35 herr Exp $
+#
+# ITI site definitions
+#
+# starting from original MIT version
+
+# site:  $XConsortium: site.def,v 1.2 91/07/30 20:26:44 rws Exp $
+
+    KMEMGROUP = kmem
+
+# ======================================================================
+# Imake template with basic definitions
+# $ITI: Base.imk,v 1.5 1994/11/28 20:57:37 schrod Exp $
+
+    LOCALDIR = /usr/local
+
+# ------------------------------------------------------------
+# Imake template for operations on files
+# $ITI: files.imk,v 1.5 1994/12/02 19:46:44 schrod Exp $
+
+    COPYIF = copyif
+    CPP = /lib/cpp
+    LN = ln -s
+    MAKEDIR = mkdir -p
+    MV = mv
+    RM = /bin/rm -f
+
+
+
+# ------------------------------------------------------------
+# Imake template for use of imake & makedepend
+# $ITI: imake.imk,v 1.9 1995/06/30 16:29:13 schrod Exp $
+
+
+
+    IMAKE = imake
+
+    IMAKE_STD_OPTIONS =
+    IMAKE_STD_INCLUDES = -I$(LOCALDIR)/lib/imake
+    IMAKE_STD_DEFINES =
+
+    IMAKE_FLAGS = $(IMAKE_OPTIONS) $(IMAKE_EXTRA_OPTIONS) $(IMAKE_STD_OPTIONS) 	       $(IMAKE_INCLUDES) $(IMAKE_EXTRA_INCLUDES) $(IMAKE_STD_INCLUDES) 	          $(IMAKE_DEFINES) $(IMAKE_EXTRA_DEFINES) $(IMAKE_STD_DEFINES)
+
+
+
+    MAKE = make
+    SHELL = /bin/sh
+
+
+
+    TOPDIR = .
+    CURDIR = .
+    THISDIR = `basename $(CURDIR)`
+
+    MAKEOVERRIDES =
+
+
+
+depend::
+	touch .dependdummy
+	$(DEPEND) $(DEPENDFLAGS) -s "# DO NOT DELETE" .dependdummy
+	$(RM) .dependdummy
+
+    DEPEND = makedepend
+    DEPENDFLAGS =
+
+
+
+    SUBDIRS =
+
+###########################################################################
+# start of Imakefile
+
+# $Id: Imakefile,v 1.5 1995/05/28 00:30:55 schrod Exp $
+
+# ======================================================================
+# Imake template for installation of TeX files
+# $ITI: TeX.imk,v 1.2 1995/03/14 12:55:51 schrod Exp $
+
+# ======================================================================
+# Imake template for software installation
+# $ITI: install.imk,v 1.2 1995/03/14 12:56:05 schrod Exp $
+
+    DESTDIR =
+
+    INSTALL = install
+    INSTALL_OWNER = $(USER)
+    INSTALL_GROUP = `id -gn`
+
+    INSTALL_DATA_RIGHTS = 644
+    INSTALL_PROGRAM_RIGHTS = 755
+    INSTALL_SCRIPT_RIGHTS = 755
+
+    TEXMF = /usr/local/lib/texmf
+
+# ======================================================================
+# Imake template for MAKEPROG, the Literate Documentation system
+# $ITI: makeprog.imk,v 1.2 1995/03/14 12:55:29 schrod Exp $
+
+    MP_DOC2TEX = doc2tex
+    MP_TEX2DOC = tex2doc
+
+# ======================================================================
+# Imake template for TeX & friends
+# $ITI: TeX.imk,v 1.1 1995/03/14 19:40:12 schrod Exp $
+
+    TEX_IT = tex-it
+
+# ------------------------------------------------------------
+# continue in Imakefile
+
+install::
+	$(MAKEDIR) $(DESTDIR)/$(TEXMF)/tex/plain/js-misc
+	@test "cassette.tex deutsch.tex idverb.tex schild.tex sperr.tex xfig.tex" -o "cassette.tex deutsch.tex idverb.tex schild.tex sperr.tex xfig.tex" = "NullParameter"  && \
+	for file in cassette.tex deutsch.tex idverb.tex 			schild.tex sperr.tex xfig.tex '' ; \
+	do 	if [ empty$$file != empty ] ; \
+	then		(set -x; $(INSTALL) -c 	-o $(INSTALL_OWNER) -g $(INSTALL_GROUP) -m $(INSTALL_DATA_RIGHTS) $$file $(DESTDIR)/$(TEXMF)/tex/plain/js-misc) ; \
+	fi ; \
+	done  || \
+	exit 0
+
+install::
+	$(MAKEDIR) $(DESTDIR)/$(TEXMF)/tex/generic/misc
+	@test "names.sty" -o "names.sty" = "NullParameter"  && \
+	for file in names.sty '' ; \
+	do 	if [ empty$$file != empty ] ; \
+	then		(set -x; $(INSTALL) -c 	-o $(INSTALL_OWNER) -g $(INSTALL_GROUP) -m $(INSTALL_DATA_RIGHTS) $$file $(DESTDIR)/$(TEXMF)/tex/generic/misc) ; \
+	fi ; \
+	done  || \
+	exit 0
+
+install::
+	$(MAKEDIR) $(DESTDIR)/$(TEXMF)/doc/plain
+	@test "js-misc.dvi" -o "js-misc.dvi" = "NullParameter"  && \
+	for file in js-misc.dvi '' ; \
+	do 	if [ empty$$file != empty ] ; \
+	then		(set -x; $(INSTALL) -c 	-o $(INSTALL_OWNER) -g $(INSTALL_GROUP) -m $(INSTALL_DATA_RIGHTS) $$file $(DESTDIR)/$(TEXMF)/doc/plain) ; \
+	fi ; \
+	done  || \
+	exit 0
+
+deutsch.tex: deutsch.doc
+	$(MP_DOC2TEX) deutsch.doc deutsch.tex
+
+all:: deutsch.tex
+
+clean::
+	$(RM) deutsch.tex
+
+idverb.tex: idverb.doc
+	$(MP_DOC2TEX) idverb.doc idverb.tex
+
+all:: idverb.tex
+
+clean::
+	$(RM) idverb.tex
+
+all:: js-misc.dvi
+
+js-misc.dvi: js-misc.tex
+	$(TEX_IT) ftex js-misc.tex
+
+clean::
+	$(RM) js-misc.dvi js-misc.log js-misc.aux js-misc.toc js-misc.blg
+
+realclean::
+	$(RM) js-misc.bbl
+
+deutsch.dvi: deutsch.doc
+	$(TEX_IT) tex deutsch.doc
+
+clean::
+	$(RM) deutsch.dvi deutsch.log deutsch.aux deutsch.toc deutsch.blg
+
+realclean::
+	$(RM) deutsch.bbl
+
+idverb.dvi: idverb.doc
+	$(TEX_IT) tex idverb.doc
+
+clean::
+	$(RM) idverb.dvi idverb.log idverb.aux idverb.toc idverb.blg
+
+realclean::
+	$(RM) idverb.bbl
+
+export:: deutsch.dvi idverb.dvi
+	$(MAKE) all
+	$(RM) *.log
+
+export::
+	touch site.imk
+	$(MAKE) Makefile IMAKE_INCLUDES=-I.
+	$(RM) -r site.imk Makefile.bak
+	cp $(HOME)/Notes/Copying.gpl License
+	pwd=`pwd` ; pwd=`suffix $$pwd /` ; cd .. ; \
+	    gtar -czvf $$pwd.tar.gz \
+		--exclude=CVS --exclude=.cvsignore $$pwd ; \
+	    cp $$pwd/README $$pwd.README
+
+# -------------------------------------------------------------------------
+# common rules for all Makefiles - do not edit
+
+Makefile::
+	@if [ -f Makefile ]; \
+	then set -x; \
+	$(RM) Makefile.bak; $(MV) Makefile Makefile.bak; \
+	else set -x; fi ; \
+	$(IMAKE) $(IMAKE_FLAGS)	-DImakeTopDir=$(TOPDIR) -DImakeCurrentDir=$(CURDIR); \
+	set +x
+
+Makefiles::
+	@case "$(MAKEFLAGS)" in *[ik]*) set +e;; esac; \
+	case "$(TOPDIR)" in \
+	/?*) newtop=$(TOPDIR) ;; \
+	*)	newtop=../$(TOPDIR) ;; \
+	esac; \
+	test "$(SUBDIRS)" -o "$(SUBDIRS)" = "NullParameter"  && \
+	for d in $(SUBDIRS) '' ; \
+	do 	if [ empty$$d != empty ] ; \
+	then		echo "making Makefiles in $(CURDIR)/$$d ..."; \
+	$(MAKE) subdirMakefiles SUBDIR=$$d TOPDIR=$$newtop	CURDIR=$(CURDIR)/$$d	 ; \
+	fi ; \
+	done  || \
+	exit 0
+
+subdirMakefiles::
+	@cd $(SUBDIR) ; \
+	if [ -f Makefile ]; \
+	then set -x; \
+	$(RM) Makefile.bak; $(MV) Makefile Makefile.bak; \
+	else set -x; fi ; \
+	$(IMAKE) $(IMAKE_FLAGS)	-DImakeTopDir=$(TOPDIR) -DImakeCurrentDir=$(CURDIR); \
+	set +x ; \
+	$(MAKE) Makefiles
+
+clean::
+	$(RM) $(CLEAN_EXTRA_FILES) *.CKP *.ln *.BAK *.bak *.o core errs ,* *~ *.a	.emacs_* tags TAGS make.log MakeOut "#"*
+
+# -------------------------------------------------------------------------
+# default rules for Imakefiles that do not generate them - do not edit
+
+all::
+
+# -------------------------------------------------------------------------
+# dependencies generated by makedepend
+
diff --git a/Master/texmf-dist/doc/plain/js-misc/README b/Master/texmf-dist/doc/plain/js-misc/README
new file mode 100644
index 00000000000..14e8bf3f5c8
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/README
@@ -0,0 +1,45 @@
+$Id: README,v 1.2 1995/05/07 16:58:21 schrod Exp $
+------------------------------------------------------------
+
+
+The plain/js-misc package collects some small miscellaneous plain TeX
+macros I wrote and use quite regularly. You'll find a complete list of
+the package's macro files at the start of Imakefile.
+
+In my opinion, of particular importance are
+
+    idverb.tex		Typesetting verbatim by |...|
+    xfig.tex		Typeset figures created by xfig (transfig, actually)
+
+There does not exist a user manual for most macros. A German
+description of two minor macro files (cassette.tex & schild.tex) is
+available in js-misc.{tex,dvi}. Other DVI files in this distribution
+feature explanations of specific macro files, typically with
+implementation info as well. The rest has user documentation at the
+top of the macro files, as comments.
+
+For installation instructions, check the file INSTALL.
+
+
+Reference anonymous ftp site:
+	ftp.th-darmstadt.de [130.83.47.112]
+	directory pub/tex/plain
+	file js-misc-<version>.tar.gz
+		where <version> is the current version number
+		(a gzipped tar file)
+
+CTAN directory:
+	macros/plain/contrib/js-misc/
+		version info is in file History
+
+
+Enjoy,
+	Joachim
+
+--
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+Joachim Schrod			Email: schrod@iti.informatik.th-darmstadt.de
+Computer Science Department
+Technical University of Darmstadt, Germany
+
+
diff --git a/Master/texmf-dist/doc/plain/js-misc/TODO b/Master/texmf-dist/doc/plain/js-misc/TODO
new file mode 100644
index 00000000000..dc42a352abf
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/TODO
@@ -0,0 +1,2 @@
+
+------------------------------------------------------------
diff --git a/Master/texmf-dist/doc/plain/js-misc/deutsch.doc b/Master/texmf-dist/doc/plain/js-misc/deutsch.doc
new file mode 100644
index 00000000000..8285a980c3c
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/deutsch.doc
@@ -0,0 +1,329 @@
+% $Id: deutsch.doc,v 1.4 1995/07/30 13:23:56 schrod Exp $
+%----------------------------------------------------------------------
+% Written by Joachim Schrod <schrod@iti.informatik.th-darmstadt.de>.
+% This file is distributed without any copyright restriction.
+
+%
+% deutsch.doc  --  typeset German documents with plain TeX.
+%
+% [TeX in MAKEPROG]
+% (history at end)
+
+
+\input progdoc
+
+\input names.sty
+\def\babel{{\sf babel}}
+
+
+
+\title{Typesetting German Documents with Plain \TeX{}}
+
+
+
+\chap Introduction.
+
+There are several defencies of plain \TeX{} if used for German
+documents:
+
+\item{---} Mappings of national characters (`umlauts' and `sharp~s')
+to macros or to other character codes (if special fonts are available)
+are missing.
+
+\item{---} \TeX{} produces lots of overfull hboxes for German texts.
+That's because the words there are usually longer than English ones.
+Furthermore we have to use much more hyphenation for German texts than
+for English ones, narrow typesetting is more important than few
+hyphenations.  In particular, words with umlauts are not hyphenated
+often anyhow, even with the `multiple-word' approach from |german.sty|.
+
+\item{---} It is typographic usage that between compound words
+ligatures are not built. Plain~\TeX{} has no easy, readable way to
+provide this.
+
+\noindent This file does the according definitions. They are quite
+often only a kludge. But it is hard to make the restrictions
+disappear, sometimes it is even impossible within the current
+implementation of \TeX{}---and there will never be any other
+implementation. So we must live with these kludges.
+
+
+\sect Of course, there is more to German typesetting.  Hyphenation,
+also for words with umlauts and sharp~s, etc.  This basic
+functionality is supplied by the \babel{} system and DANTE's
+|german.sty|, we have to load the appropriate module.
+
+There's one problem, though. \babel{}~3.5 defines
+|\DeclareTextSymbol|, a symbol used by |german.sty| to decide if it
+shall use NFSS code to access symbols. But that usage will lead to an
+endless recursion, because some text symbols are defined by
+themselves. I don't know if that problem is caused by \babel{}'s code
+or by its usage in |german.sty| -- turning it off seems to be an
+appropriate fix.
+
+\beginprog
+\let\DeclareTextSymbol\undefined
+\input german.sty
+\endprog
+
+
+\sect But before we start we declare some shorthands for category
+codes. By declaring the at sign~(`|@|') as well as the
+underscore~`(|_|)' as letters we can use them in our macros. (I
+agree with D.~Knuth that |\identifier_several_words_long| is more
+readable than |\IdentifierSeveralWordsLong| and in every case better
+than |\p@@@s|.) With the at sign we can use the ``private'' Plain
+macros and with the underscore we can make our own macros more
+readable. But as we have to restore these category codes at the end
+of this macro file we store their former values in control
+sequences. This method is better than to use
+a group because not all macros have to be defined global this way.
+
+\beginprog
+\ifx \CatEscape\undefined
+    \chardef\CatEscape=0
+    \chardef\CatOpen=1
+    \chardef\CatClose=2
+    \chardef\CatIgnore=9
+    \chardef\CatLetter=11
+    \chardef\CatOther=12
+    \chardef\CatActive=13               % \active of plain.tex
+    \chardef\CatInvalid=15
+
+    \chardef\CatAtCode=\catcode`\@
+    \chardef\CatUsCode=\catcode`\_
+\fi
+
+\catcode`\@=\CatLetter                  % top level macro file
+\catcode`\_=\CatLetter
+\endprog
+
+
+\sect Let's identify this macro file against the user and in the Log file.
+
+\beginprog
+\begingroup
+    \catcode`\$=\CatIgnore
+    \catcode`\:=\CatIgnore
+    \message{Support for German documents, $Revision: 1.4 $}
+\endgroup
+\endprog
+
+
+
+\chap National Characters.
+
+By default no extended characters are available, except those defined
+below.  I.e., we start to treat all characters from |"7F| to |"FF| as
+invalid characters.
+
+\beginprog
+\count@="7F
+\loop
+    \catcode \the\count@ = \CatInvalid
+    \advance\count@ by 1
+  \ifnum \count@ < "100
+\repeat
+\endprog
+
+
+\sect We provide a command for the definition of non-ASCII characters:
+|\ExtendChar|. A sample definition of an ``Umlaut-a''~(\"a) in the
+extended code of an IBM~PC (hex code~|"84|) is:
+$$
+    |\ExtendChar\^^84: {^^84}{\"a}|
+$$
+First the hex code is given as a control sequence, followed by a
+colon. Afterwards come two parameters, the first is again the hex
+code, the second is the token list which should be used instead of the
+hex code.
+
+The macro definition is rather easy, we just have to make the
+respective character active and bind it to it's new meaning.
+
+\beginprog
+\def\ExtendChar #1:{%
+    \catcode`#1 \CatActive
+    \extend_char
+    }
+\def\extend_char #1#2{%
+    \def #1{#2}%
+    }
+\endprog
+
+
+\sect Now we can define some replacements.
+
+The braces after the control sequences are needed when characters from
+the extended character set are written to an auxiliary file and read
+in later. During the |\write| they are expanded and following white
+space would be gobbled if the braces would not be there.
+
+\beginprog
+% ISO-Latin-1
+\ExtendChar\^^c4: {^^c4}{\"A}
+\ExtendChar\^^d6: {^^d6}{\"O}
+\ExtendChar\^^dc: {^^dc}{\"U}
+\ExtendChar\^^df: {^^df}{\ss{}}
+\ExtendChar\^^e4: {^^e4}{\"a}
+\ExtendChar\^^f6: {^^f6}{\"o}
+\ExtendChar\^^fc: {^^fc}{\"u}
+
+% IBM PC (code page 850)
+\ExtendChar\^^81: {^^81}{\"u}
+\ExtendChar\^^84: {^^84}{\"a}
+\ExtendChar\^^8e: {^^8e}{\"A}
+\ExtendChar\^^94: {^^94}{\"o}
+\ExtendChar\^^99: {^^99}{\"O}
+\ExtendChar\^^9a: {^^9a}{\"U}
+\ExtendChar\^^e1: {^^e1}{\ss{}} % actually \beta, used as \ss in Germany
+
+% Atari ST (like IBM PC, but with a real `sharp~s')
+\ExtendChar\^^9e: {^^9e}{\ss{}}
+\endprog
+
+
+
+\chap Paragraph Breaking.
+
+As outlined in the introduction, we allow longer interword spaces.  A
+line now may have a badness up to 2500, over 1500 a warning is to be
+given. Furthermore the penalties for hyphenation are lowered because a
+narrow typesetting is preferred against few hyphenations.
+
+These values are still experimental and should be tuned.
+
+As |german.sty| uses \babel{} compatible structure, the german
+language hook is a good place to store such definitions. But to
+use \babel{}'s convenient macros, too, we have to assure that it's
+kernel code is loaded first.
+
+\beginprog
+\ifx \babel@core@loaded\undefined
+    \input babel.def
+\fi
+\addto\extrasgerman{%
+    \babel@savevariable\tolerance
+    \babel@savevariable\hbadness
+    \babel@savevariable\doublehyphendemerits
+    \babel@savevariable\finalhyphendemerits
+    \babel@savevariable\adjdemerits
+    \tolerance 2500  \hbadness 1500
+    \doublehyphendemerits 50000
+    \finalhyphendemerits 25000
+    \adjdemerits 50000
+    }
+\endprog
+
+
+\sect In some languages ligatures should not appear between compound
+words. We use {\tt \string\|\/} to mark those places. This is only
+done within text mode, in math mode {\tt \string\|\/} is still
+`$\|$'. But it is sure that one can always hyphenate between compound
+words, so we insert |\-|. To allow the hyphenation in other parts of
+the word though, we use |\allowhyphens| again.
+
+\beginprog
+\def\|{%                % break open a ligature (if not in math mode)
+    \relax
+    \ifmmode  \Vert
+    \else  \allowhyphens\-\allowhyphens
+    \fi
+    }
+\endprog
+
+
+\sect Don't use the dreaded `double quote special meaning' stuff of
+|german.sty|. And use original umlauts. Already in M\"unster I voted
+against it\dots
+
+\beginprog
+\addto\extrasgerman{%
+    \mdqoff
+    \umlautlow
+    }
+\endprog
+
+
+\sect Define |\SwitchtoLanguage| for upward compatibility.  It does
+not really do the same, the old definition was more similar to
+|\selectlanguage|.  But other languages have to be declared
+explicitely, that's not done by this macro file.  So we just want to
+make old documents processable.
+
+\beginprog
+\def\SwitchtoLanguage#1{\language \csname l@#1\endcsname}
+\endprog
+
+
+\sect We are finished; switch to german language (to enable the new
+extras defined above), restore the catcodes and prevent from following
+garbage.
+
+\beginprog
+\selectlanguage{german}
+
+\catcode`\@=\CatAtCode
+\catcode`\_=\CatUsCode
+
+\endinput
+\endprog
+
+
+%% \sect {\it Acknowledgements:}\quad I would like to thank XXX
+
+
+\bye
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% $Log: deutsch.doc,v $
+% Revision 1.4  1995/07/30  13:23:56  schrod
+%     Discard babel definition of \DeclareTextCommand before including
+% german.sty, they are incompatible.
+%
+% Revision 1.3  1995/07/29  17:58:24  schrod
+%     Use german.sty, not germanb.sty. (babel 3.5 is not functional for
+% plain TeX any more.) But we still want to use babel's macros, we have
+% to load it's kernel for that.
+%
+% Revision 1.2  1995/03/13  23:18:10  schrod
+%     Started to manage this package with CVS. Made minor code cleanup.
+%
+% Revision 1.1  1994/10/16  16:57:30  schrod
+%     Merged macros from local.tex, codes.tex, and language.tex.  This
+% new file is mainly there to provide upward compatibility for our old
+% documents.
+%
+%
+%
+% pre-CVS Version History:
+%
+% DATE     WHO REMARKS
+% 91-01-18 js  set all extended characters to code invalid
+% 90-12-23 js  added the definition of \ExtendChar for usage in codes.tex.
+% 90-10-06 js  renamed from dlocal to local, it's now international,
+%              adapted to TeX 3:
+%                 included codes.tex and langdef.tex if they exist,
+%                 assumed that language.tex is already loaded,
+%                 defined German parameters as a language hook,
+%              removed first \allowhyphens in \uml@ut,
+%              documented it with MAKEPROG.
+% 89-10-27 js  was reworked for ILaTeX
+% 89-05-31 js  defined \| as a separator for ligatures in text mode
+% 87-10-01 js  introduced \protect,
+%              set parameters for German page makeup
+% 87-??-?? kg  first release
+%
+% kg: Klaus Guntermann <gunterma@<schrod@iti.informatik.th-darmstadt.de>
+% js: Joachim Schrod <schrod@iti.informatik.th-darmstadt.de>
+
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+Local Variables:
+mode: plain-TeX
+TeX-master: t
+TeX-brace-indent-level: 4
+End:
diff --git a/Master/texmf-dist/doc/plain/js-misc/deutsch.tex b/Master/texmf-dist/doc/plain/js-misc/deutsch.tex
new file mode 100644
index 00000000000..26f3e3719d6
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/deutsch.tex
@@ -0,0 +1,350 @@
+% $Id: deutsch.doc,v 1.4 1995/07/30 13:23:56 schrod Exp $
+%----------------------------------------------------------------------
+% Written by Joachim Schrod <schrod@iti.informatik.th-darmstadt.de>.
+% This file is distributed without any copyright restriction.
+
+%
+% deutsch.doc  --  typeset German documents with plain TeX.
+%
+% [TeX in MAKEPROG]
+% (history at end)
+
+
+%%%%
+%%%%
+%%%% These TeX macros were documented with the documentation system
+%%%% MAKEPROG and automatically converted to the current form.
+%%%% If you have MAKEPROG available you may transform it back to
+%%%% the original input: Remove every occurence of three percents
+%%%% and one optional blank from the beginning of a line and remove
+%%%% every line which starts with four percents.  The following lex
+%%%% program will do this:
+%%%%
+%%%%	%%
+%%%%
+%%%%	^%%%\ ?   ;
+%%%%	^%%%%.*\n ;
+%%%%
+%%%%	If you just want to print the documentation you may fetch
+%%%% the archive print-makeprog.tar.Z from ftp.th-darmstadt.de (directory
+%%%% pub/tex/latex). It contains *all* used styles -- but beware, they
+%%%% may not be in a documented form...
+%%%%
+%%%%
+%%% \input progdoc
+
+%%% \input names.sty
+%%% \def\babel{{\sf babel}}
+
+
+
+%%% \title{Typesetting German Documents with Plain \TeX{}}
+
+
+
+%%% \chap Introduction.
+
+%%% There are several defencies of plain \TeX{} if used for German
+%%% documents:
+
+%%% \item{---} Mappings of national characters (`umlauts' and `sharp~s')
+%%% to macros or to other character codes (if special fonts are available)
+%%% are missing.
+
+%%% \item{---} \TeX{} produces lots of overfull hboxes for German texts.
+%%% That's because the words there are usually longer than English ones.
+%%% Furthermore we have to use much more hyphenation for German texts than
+%%% for English ones, narrow typesetting is more important than few
+%%% hyphenations.  In particular, words with umlauts are not hyphenated
+%%% often anyhow, even with the `multiple-word' approach from |german.sty|.
+
+%%% \item{---} It is typographic usage that between compound words
+%%% ligatures are not built. Plain~\TeX{} has no easy, readable way to
+%%% provide this.
+
+%%% \noindent This file does the according definitions. They are quite
+%%% often only a kludge. But it is hard to make the restrictions
+%%% disappear, sometimes it is even impossible within the current
+%%% implementation of \TeX{}---and there will never be any other
+%%% implementation. So we must live with these kludges.
+
+
+%%% \sect Of course, there is more to German typesetting.  Hyphenation,
+%%% also for words with umlauts and sharp~s, etc.  This basic
+%%% functionality is supplied by the \babel{} system and DANTE's
+%%% |german.sty|, we have to load the appropriate module.
+
+%%% There's one problem, though. \babel{}~3.5 defines
+%%% |\DeclareTextSymbol|, a symbol used by |german.sty| to decide if it
+%%% shall use NFSS code to access symbols. But that usage will lead to an
+%%% endless recursion, because some text symbols are defined by
+%%% themselves. I don't know if that problem is caused by \babel{}'s code
+%%% or by its usage in |german.sty| -- turning it off seems to be an
+%%% appropriate fix.
+
+%%% \beginprog
+\let\DeclareTextSymbol\undefined
+\input german.sty
+%%% \endprog
+
+
+%%% \sect But before we start we declare some shorthands for category
+%%% codes. By declaring the at sign~(`|@|') as well as the
+%%% underscore~`(|_|)' as letters we can use them in our macros. (I
+%%% agree with D.~Knuth that |\identifier_several_words_long| is more
+%%% readable than |\IdentifierSeveralWordsLong| and in every case better
+%%% than |\p@@@s|.) With the at sign we can use the ``private'' Plain
+%%% macros and with the underscore we can make our own macros more
+%%% readable. But as we have to restore these category codes at the end
+%%% of this macro file we store their former values in control
+%%% sequences. This method is better than to use
+%%% a group because not all macros have to be defined global this way.
+
+%%% \beginprog
+\ifx \CatEscape\undefined
+    \chardef\CatEscape=0
+    \chardef\CatOpen=1
+    \chardef\CatClose=2
+    \chardef\CatIgnore=9
+    \chardef\CatLetter=11
+    \chardef\CatOther=12
+    \chardef\CatActive=13               % \active of plain.tex
+    \chardef\CatInvalid=15
+
+    \chardef\CatAtCode=\catcode`\@
+    \chardef\CatUsCode=\catcode`\_
+\fi
+
+\catcode`\@=\CatLetter                  % top level macro file
+\catcode`\_=\CatLetter
+%%% \endprog
+
+
+%%% \sect Let's identify this macro file against the user and in the Log file.
+
+%%% \beginprog
+\begingroup
+    \catcode`\$=\CatIgnore
+    \catcode`\:=\CatIgnore
+    \message{Support for German documents, $Revision: 1.4 $}
+\endgroup
+%%% \endprog
+
+
+
+%%% \chap National Characters.
+
+%%% By default no extended characters are available, except those defined
+%%% below.  I.e., we start to treat all characters from |"7F| to |"FF| as
+%%% invalid characters.
+
+%%% \beginprog
+\count@="7F
+\loop
+    \catcode \the\count@ = \CatInvalid
+    \advance\count@ by 1
+  \ifnum \count@ < "100
+\repeat
+%%% \endprog
+
+
+%%% \sect We provide a command for the definition of non-ASCII characters:
+%%% |\ExtendChar|. A sample definition of an ``Umlaut-a''~(\"a) in the
+%%% extended code of an IBM~PC (hex code~|"84|) is:
+%%% $$
+%%%     |\ExtendChar\^^84: {^^84}{\"a}|
+%%% $$
+%%% First the hex code is given as a control sequence, followed by a
+%%% colon. Afterwards come two parameters, the first is again the hex
+%%% code, the second is the token list which should be used instead of the
+%%% hex code.
+
+%%% The macro definition is rather easy, we just have to make the
+%%% respective character active and bind it to it's new meaning.
+
+%%% \beginprog
+\def\ExtendChar #1:{%
+    \catcode`#1 \CatActive
+    \extend_char
+    }
+\def\extend_char #1#2{%
+    \def #1{#2}%
+    }
+%%% \endprog
+
+
+%%% \sect Now we can define some replacements.
+
+%%% The braces after the control sequences are needed when characters from
+%%% the extended character set are written to an auxiliary file and read
+%%% in later. During the |\write| they are expanded and following white
+%%% space would be gobbled if the braces would not be there.
+
+%%% \beginprog
+% ISO-Latin-1
+\ExtendChar\^^c4: {^^c4}{\"A}
+\ExtendChar\^^d6: {^^d6}{\"O}
+\ExtendChar\^^dc: {^^dc}{\"U}
+\ExtendChar\^^df: {^^df}{\ss{}}
+\ExtendChar\^^e4: {^^e4}{\"a}
+\ExtendChar\^^f6: {^^f6}{\"o}
+\ExtendChar\^^fc: {^^fc}{\"u}
+
+% IBM PC (code page 850)
+\ExtendChar\^^81: {^^81}{\"u}
+\ExtendChar\^^84: {^^84}{\"a}
+\ExtendChar\^^8e: {^^8e}{\"A}
+\ExtendChar\^^94: {^^94}{\"o}
+\ExtendChar\^^99: {^^99}{\"O}
+\ExtendChar\^^9a: {^^9a}{\"U}
+\ExtendChar\^^e1: {^^e1}{\ss{}} % actually \beta, used as \ss in Germany
+
+% Atari ST (like IBM PC, but with a real `sharp~s')
+\ExtendChar\^^9e: {^^9e}{\ss{}}
+%%% \endprog
+
+
+
+%%% \chap Paragraph Breaking.
+
+%%% As outlined in the introduction, we allow longer interword spaces.  A
+%%% line now may have a badness up to 2500, over 1500 a warning is to be
+%%% given. Furthermore the penalties for hyphenation are lowered because a
+%%% narrow typesetting is preferred against few hyphenations.
+
+%%% These values are still experimental and should be tuned.
+
+%%% As |german.sty| uses \babel{} compatible structure, the german
+%%% language hook is a good place to store such definitions. But to
+%%% use \babel{}'s convenient macros, too, we have to assure that it's
+%%% kernel code is loaded first.
+
+%%% \beginprog
+\ifx \babel@core@loaded\undefined
+    \input babel.def
+\fi
+\addto\extrasgerman{%
+    \babel@savevariable\tolerance
+    \babel@savevariable\hbadness
+    \babel@savevariable\doublehyphendemerits
+    \babel@savevariable\finalhyphendemerits
+    \babel@savevariable\adjdemerits
+    \tolerance 2500  \hbadness 1500
+    \doublehyphendemerits 50000
+    \finalhyphendemerits 25000
+    \adjdemerits 50000
+    }
+%%% \endprog
+
+
+%%% \sect In some languages ligatures should not appear between compound
+%%% words. We use {\tt \string\|\/} to mark those places. This is only
+%%% done within text mode, in math mode {\tt \string\|\/} is still
+%%% `$\|$'. But it is sure that one can always hyphenate between compound
+%%% words, so we insert |\-|. To allow the hyphenation in other parts of
+%%% the word though, we use |\allowhyphens| again.
+
+%%% \beginprog
+\def\|{%                % break open a ligature (if not in math mode)
+    \relax
+    \ifmmode  \Vert
+    \else  \allowhyphens\-\allowhyphens
+    \fi
+    }
+%%% \endprog
+
+
+%%% \sect Don't use the dreaded `double quote special meaning' stuff of
+%%% |german.sty|. And use original umlauts. Already in M\"unster I voted
+%%% against it\dots
+
+%%% \beginprog
+\addto\extrasgerman{%
+    \mdqoff
+    \umlautlow
+    }
+%%% \endprog
+
+
+%%% \sect Define |\SwitchtoLanguage| for upward compatibility.  It does
+%%% not really do the same, the old definition was more similar to
+%%% |\selectlanguage|.  But other languages have to be declared
+%%% explicitely, that's not done by this macro file.  So we just want to
+%%% make old documents processable.
+
+%%% \beginprog
+\def\SwitchtoLanguage#1{\language \csname l@#1\endcsname}
+%%% \endprog
+
+
+%%% \sect We are finished; switch to german language (to enable the new
+%%% extras defined above), restore the catcodes and prevent from following
+%%% garbage.
+
+%%% \beginprog
+\selectlanguage{german}
+
+\catcode`\@=\CatAtCode
+\catcode`\_=\CatUsCode
+
+\endinput
+%%% \endprog
+
+
+%%% %% \sect {\it Acknowledgements:}\quad I would like to thank XXX
+
+
+%%% \bye
+
+%%% 
+%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% %
+%%% % $Log: deutsch.doc,v $
+%%% % Revision 1.4  1995/07/30  13:23:56  schrod
+%%% %     Discard babel definition of \DeclareTextCommand before including
+%%% % german.sty, they are incompatible.
+%%% %
+%%% % Revision 1.3  1995/07/29  17:58:24  schrod
+%%% %     Use german.sty, not germanb.sty. (babel 3.5 is not functional for
+%%% % plain TeX any more.) But we still want to use babel's macros, we have
+%%% % to load it's kernel for that.
+%%% %
+%%% % Revision 1.2  1995/03/13  23:18:10  schrod
+%%% %     Started to manage this package with CVS. Made minor code cleanup.
+%%% %
+%%% % Revision 1.1  1994/10/16  16:57:30  schrod
+%%% %     Merged macros from local.tex, codes.tex, and language.tex.  This
+%%% % new file is mainly there to provide upward compatibility for our old
+%%% % documents.
+%%% %
+%%% %
+%%% %
+%%% % pre-CVS Version History:
+%%% %
+%%% % DATE     WHO REMARKS
+%%% % 91-01-18 js  set all extended characters to code invalid
+%%% % 90-12-23 js  added the definition of \ExtendChar for usage in codes.tex.
+%%% % 90-10-06 js  renamed from dlocal to local, it's now international,
+%%% %              adapted to TeX 3:
+%%% %                 included codes.tex and langdef.tex if they exist,
+%%% %                 assumed that language.tex is already loaded,
+%%% %                 defined German parameters as a language hook,
+%%% %              removed first \allowhyphens in \uml@ut,
+%%% %              documented it with MAKEPROG.
+%%% % 89-10-27 js  was reworked for ILaTeX
+%%% % 89-05-31 js  defined \| as a separator for ligatures in text mode
+%%% % 87-10-01 js  introduced \protect,
+%%% %              set parameters for German page makeup
+%%% % 87-??-?? kg  first release
+%%% %
+%%% % kg: Klaus Guntermann <gunterma@<schrod@iti.informatik.th-darmstadt.de>
+%%% % js: Joachim Schrod <schrod@iti.informatik.th-darmstadt.de>
+
+
+%%% 
+%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% Local Variables:
+%%% mode: plain-TeX
+%%% TeX-master: t
+%%% TeX-brace-indent-level: 4
+%%% End:
diff --git a/Master/texmf-dist/doc/plain/js-misc/idverb.doc b/Master/texmf-dist/doc/plain/js-misc/idverb.doc
new file mode 100644
index 00000000000..79fb0b183dd
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/idverb.doc
@@ -0,0 +1,194 @@
+% $Id: idverb.doc,v 1.1 1995/03/13 23:18:11 schrod Exp $
+%----------------------------------------------------------------------
+% Written by Joachim Schrod <schrod@iti.informatik.th-darmstadt.de>.
+% Copyright conditions see below.
+
+%
+% idverb.doc  ---  typeset identifiers verbatim
+%
+% [plain TeX in MAKEPROG]
+% (history at end)
+
+
+\input progdoc
+
+\input names.sty
+\def\v{{\tt \vbar\/}}
+
+
+
+\title{Identifiers Verbatim \`a la {\ttitlefont WEB}}
+
+
+
+\chap Introduction.
+
+This macro files allows to write identifiers in a \WEB{} like style,
+i.e.\ as {\tt \origvert identifier\origvert\/}. The identifiers are
+typeset verbatim in the monospace type face. The macros
+|\makevertother| and |\makevertactive| are available to activate and
+deactivate the special behaviour of the vertical bar.
+
+
+\sect This macro file uses the namespace |idv|.
+
+\beginprog
+\ifx \IdvLoaded\undefined
+    \def\IdvLoaded{$Revision: 1.1 $}
+\else \endinput \fi                     % <-- one line!
+\endprog
+
+
+\sect These macros are supported. Send bug reports, comments and
+repairs.
+
+The reference version may be retrieved via anonymous ftp from
+|ftp.th-darmstadt.de| [130.83.47.112], directory |pub/tex/plain|. It's
+placed there as a gzipped tar file. (The information on the
+IP~number is dated March 13, 1995. It might have changed, also this is very
+unlikely. Use your friendly nameserver.)
+
+
+\sect This is freely distributable software; you can redistribute it
+and/or modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version~2 of the
+License, or (at your option) any later version.
+
+This software is distributed in the hope that it will be useful, but
+{\bf without any warranty\/}; without even the implied warranty of
+{\bf merchantability\/} or {\bf fitness for a particular purpose}.  See
+the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License in
+the file |License| along with this package; if not, write to the Free
+Software Foundation, Inc., 675~Mass Ave, Cambridge, MA~02139,~USA.
+
+
+\sect But before we start we declare some shorthands for category
+codes. By declaring the at sign~(`|@|') as well as the
+underscore~`(|_|)' as letters we can use them in our macros. (I agree
+with D.~Knuth that |\identifier_several_words_long| is more readable
+than |\IdentifierSeveralWordsLong| and in every case better than
+|\p@@@s|.) With the at sign we can use the ``private'' Plain macros
+and with the underscore we can make our own macros more readable. But
+as we have to restore these category codes at the end of this macro
+file we store their former values in control sequences. This method is
+better than to use a group because not all macros have to be defined
+global this way.
+
+Only the first macro file read in defines the |Cat| cseqs.
+
+\beginprog
+\ifx \CatEscape\undefined
+    \chardef\CatEscape=0
+    \chardef\CatOpen=1
+    \chardef\CatClose=2
+    \chardef\CatIgnore=9
+    \chardef\CatLetter=11
+    \chardef\CatOther=12
+    \chardef\CatActive=13               % \active of plain.tex
+    \chardef\CatInvalid=15
+
+    \chardef\CatAtCode=\catcode`\@
+    \chardef\CatUsCode=\catcode`\_
+\fi
+
+\catcode`\@=\CatLetter                  % top level macro file
+\catcode`\_=\CatLetter
+\endprog
+
+
+\sect Let's identify this macro file against the user and in the Log file.
+
+\beginprog
+\begingroup
+    \catcode`\$=\CatIgnore
+    \catcode`\:=\CatIgnore
+    \message{Verbatim identifiers, $Revision: 1.1 $}
+\endgroup
+\endprog
+
+
+\sect The usual verbatim macros use |\dospecials| to change the
+catcode of all special characters. We have to add `\v' to this list.
+The old meaning is stored in |\idv_OrigDospecials|.
+
+\beginprog
+\let\idv_OrigDospecials=\dospecials
+\begingroup
+    \def\do#1{\noexpand\do\noexpand#1}
+    \xdef\dospecials{\idv_OrigDospecials\do\|}
+\endgroup
+\let\idv_dospecials=\dospecials
+
+\def\makevertactive{\catcode`\|\CatActive \let\dospecials\idv_dospecials}
+\def\makevertother{\catcode`\|\CatOther \let\dospecials\idv_OrigDospecials}
+
+\makevertactive
+\endprog
+
+
+\sect Now we can define `\v'. This definition is a little bit tricky,
+as it redefines itself to |\egroup| to close the hbox. But if the hbox
+is ended, `\v' is restored to its original meaning. |\origvert| is
+given the original meaning of `\v'. |\vbar| is the character from the
+current font that has the ASCII code of a vertical bar, sometimes this
+{\it is\/} a vertical bar.
+
+\beginprog
+\let\origvert=|
+\chardef\vbar=`\|
+
+\def\idv_setup_verbatim{%
+    \def\do##1{\catcode`##1\CatOther}\idv_OrigDospecials
+    \parskip\z@skip \parindent\z@
+    \obeylines \obeyspaces \frenchspacing
+    \tt
+    }
+
+\def|{%
+    \leavevmode
+    \hbox\bgroup
+        \let\par\space \idv_setup_verbatim
+        \let|\egroup
+    }
+\endprog
+
+
+\sect We are finished;
+restore the catcodes and prevent from following garbage.
+
+\beginprog
+\catcode`\@=\CatAtCode
+\catcode`\_=\CatUsCode
+
+\endinput
+\endprog
+
+
+%% \sect {\it Acknowledgements:}\quad I would like to thank XXX
+
+
+\bye
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% $Log: idverb.doc,v $
+% Revision 1.1  1995/03/13  23:18:11  schrod
+%     Started to manage this package with CVS. Made minor code cleanup.
+%
+
+%
+% Pre-CVS Log:
+%
+% 27 Jul 89 js  Initial revision.
+
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+Local Variables:
+mode: plain-TeX
+TeX-master: t
+TeX-brace-indent-level: 4
+End:
diff --git a/Master/texmf-dist/doc/plain/js-misc/names.sty b/Master/texmf-dist/doc/plain/js-misc/names.sty
new file mode 100644
index 00000000000..57452c17b52
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/names.sty
@@ -0,0 +1,95 @@
+% $Id: names.sty,v 1.2 1995/03/13 23:18:13 schrod Exp $
+%------------------------------------------------------------
+
+%
+% Verfuegbarkeit von haeufigen Abkuerzungen/Logos in
+% LaTeX und Formate bei Grund-Schriftgroesse 10pt.
+%
+% alle Logos nur in Roman
+% TeX related Logos:
+%       \TeX
+%       \INITeX
+%       \Plain           Plain TeX
+%       \LaTeX
+%       \BibTeX
+%       \SliTeX
+%       \MakeIndex       (kursiv)
+%       \AmSTeX          AmS-TeX
+%       \LAMSTeX	 LAmS-TeX
+%       \MF              METAFONT
+%       \INIMF
+%       \WEB
+%       \CWEB
+%       \TIE
+%       \stTeX
+%       \stMF
+% Dateitypen (alle in teletype):
+%       \LOG
+%       \DVI
+%       \FMT
+%       \TFM
+%       \GF
+%       \PK
+%       \PXL
+% andere Logos:
+%	\C++
+
+
+\font\tenlogo=logo10
+\let\logo=\tenlogo
+\ifx \mc\undefined  \let\mc=\small  \fi  % fuer LaTeX, `medium caps'
+
+
+% FIXME: should the space factor be set to 1000 afterwards?
+% is it a global value? otherwise it would be a faulty design within TeX...
+\def\TeX{{\rm T\kern-.1667em\lower.5ex\hbox{E}\kern-.125emX}}
+\def\INITeX{{\rm INI\TeX}}
+
+\def\Plain{{\rm Plain~\TeX}}
+
+% LaTeX-Definition mit Original-TeX-Logo!
+% Entspricht nicht der Definition von L. Lamport, ist aber konsistenter
+\def\LaTeX{{\rm L\kern-.36em\raise.3ex\hbox{\sc a}\kern-.15em\TeX}}
+\def\BibTeX{{\rm B\kern-.05em{\sc i\kern-.025em b}\kern-.08em\TeX}}
+\def\SliTeX{{\rm S\kern-.06em{\sc l\kern-.035em i}\kern-.06em\TeX}}
+\def\MakeIndex{{\it MakeIndex\/}}
+
+\def\AmSTeX{%
+   $\cal A\kern-.1667em\lower.5ex\hbox{$\cal M$}\kern-.125em S$%
+   -\TeX
+   }
+\def\LAMSTeX{%
+   L\raise.42ex\hbox{$\scriptstyle\kern-.3em\cal A$}\kern-.2em
+   \lower.376ex\hbox{$\cal M$}\kern-.125em $\cal S$%
+   -\TeX
+   }
+
+
+\def\MF{{\logo META}\-{\logo FONT\/}}
+\def\INIMF{{\mc INI}{\logo MF}}
+
+
+\def\WEB{{\tt WEB\/}}
+\def\CWEB{{\mc CWEB}}
+\def\TIE{{\tt TIE\/}}
+
+
+\def\stTeX{{\sc st\rm\kern-0.13em\TeX}} % unser stTeX (TeXsys)
+\def\stMF{{\sc st}{\logo MF}}           % unser stMF
+
+
+\def\LOG{{\tt LOG\/}}
+\def\DVI{{\tt DVI\/}}
+\def\FMT{{\tt FMT\/}}
+\def\TFM{{\tt TFM\/}}
+
+\def\GF{{\tt GF\/}}
+\def\PK{{\tt PK\/}}
+\def\PXL{{\tt PXL\/}}
+
+
+
+\def\C++{C\raise .4ex\hbox{$\scriptstyle +\!+$}}
+
+
+\endinput
diff --git a/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1-doc.tex b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1-doc.tex
new file mode 100644
index 00000000000..ed37a84508c
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1-doc.tex
@@ -0,0 +1,27 @@
+% $Id: text-2.1-doc.tex,v 1.1 1995/05/07 16:52:36 schrod Exp $
+%------------------------------------------------------------
+
+%
+% Test for xfig text typesetting of transfig 2.1 output
+%
+
+
+\input ../xfig.tex
+
+$$
+\hbox{\input text-2.1.latex }
+$$
+
+
+
+\bye
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Local Variables:
+mode: plain-TeX
+TeX-parse-self: nil
+TeX-auto-save: nil
+TeX-master: t
+End:
diff --git a/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.fig b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.fig
new file mode 100644
index 00000000000..21c740e0675
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.fig
@@ -0,0 +1,3 @@
+#FIG 2.1
+80 2
+4 0 0 10 0 -1 0 0.00000 2 13 58 26 29 Hello, World

diff --git a/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.latex b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.latex
new file mode 100644
index 00000000000..9eccd773f82
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/xfig/text-2.1.latex
@@ -0,0 +1,26 @@
+\setlength{\unitlength}{0.012500in}%
+%
+\begingroup\makeatletter\ifx\SetFigFont\undefined
+% extract first six characters in \fmtname
+\def\x#1#2#3#4#5#6#7\relax{\def\x{#1#2#3#4#5#6}}%
+\expandafter\x\fmtname xxxxxx\relax \def\y{splain}%
+\ifx\x\y   % LaTeX or SliTeX?
+\gdef\SetFigFont#1#2#3{%
+  \ifnum #1<17\tiny\else \ifnum #1<20\small\else
+  \ifnum #1<24\normalsize\else \ifnum #1<29\large\else
+  \ifnum #1<34\Large\else \ifnum #1<41\LARGE\else
+     \huge\fi\fi\fi\fi\fi\fi
+  \csname #3\endcsname}%
+\else
+\gdef\SetFigFont#1#2#3{\begingroup
+  \count@#1\relax \ifnum 25<\count@\count@25\fi
+  \def\x{\endgroup\@setsize\SetFigFont{#2pt}}%
+  \expandafter\x
+    \csname \romannumeral\the\count@ pt\expandafter\endcsname
+    \csname @\romannumeral\the\count@ pt\endcsname
+  \csname #3\endcsname}%
+\fi
+\fi\endgroup
+\begin{picture}(0,13)(27,810)
+\put( 27,810){\makebox(0,0)[lb]{\smash{\SetFigFont{10}{12.0}{rm}Hello, World}}}
+\end{picture}
diff --git a/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1-doc.tex b/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1-doc.tex
new file mode 100644
index 00000000000..2bde7ee926c
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1-doc.tex
@@ -0,0 +1,27 @@
+% $Id: text-3.1-doc.tex,v 1.1 1995/05/07 16:52:38 schrod Exp $
+%------------------------------------------------------------
+
+%
+% Test for xfig text typesetting of transfig 3.1 output
+%
+
+
+\input ../xfig.tex
+
+$$
+\hbox{\input text-3.1.latex }
+$$
+
+
+
+\bye
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Local Variables:
+mode: plain-TeX
+TeX-parse-self: nil
+TeX-auto-save: nil
+TeX-master: t
+End:
diff --git a/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1.latex b/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1.latex
new file mode 100644
index 00000000000..c35c42a91a7
--- /dev/null
+++ b/Master/texmf-dist/doc/plain/js-misc/xfig/text-3.1.latex
@@ -0,0 +1,11 @@
+\setlength{\unitlength}{0.01250000in}%
+%
+\begingroup\makeatletter\ifx\SetFigFont\undefined%
+\gdef\SetFigFont#1#2#3#4#5{%
+  \reset@font\fontsize{#1}{#2pt}%
+  \fontfamily{#3}\fontseries{#4}\fontshape{#5}%
+  \selectfont}%
+\fi\endgroup%
+\begin{picture}(0,13)(27,808)
+\put( 27,810){\makebox(0,0)[lb]{\smash{\SetFigFont{10}{12.0}{\familydefault}{\mddefault}{\updefault}Hello, World}}}
+\end{picture}