summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2014-02-06 23:28:44 +0000
committerKarl Berry <karl@freefriends.org>2014-02-06 23:28:44 +0000
commitc33fed8d37bc51a8a9ff5a5f1a806dac56765c8d (patch)
treef95a9e2a7ddf6ffa449a8d74ecaca762ab845c09 /Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx
parent55bbd0a3dd6e4f70a9cae6283e0e84b2aba02989 (diff)
luatexja (4feb14)
git-svn-id: svn://tug.org/texlive/trunk@32895 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx')
-rw-r--r--Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx1607
1 files changed, 1169 insertions, 438 deletions
diff --git a/Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx b/Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx
index 2d1b591befb..fac07d2f26c 100644
--- a/Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx
+++ b/Master/texmf-dist/doc/luatex/luatexja/luatexja.dtx
@@ -6,6 +6,9 @@
% - KozGoPr6N-Medium.otf
% - KozGoPr6N-Regular.otf
+%%%%% section ==> 章
+%%%%% subsection => 節
+
%<en>\documentclass[a4paper,titlepage]{article}
%<ja>\documentclass[a4paper,titlepage]{ltjsarticle}
@@ -29,7 +32,7 @@
\let\@listfiles\empty
%<*en>
-\usepackage[margin=25mm,footskip=6mm]{geometry}
+\usepackage[margin=25mm,lmargin=30mm,rmargin=30mm,footskip=6mm]{geometry}
\usepackage{luatexja-adjust}\ltjdisableadjust
\parskip=\smallskipamount
\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
@@ -71,7 +74,7 @@
\let\SX@Info\relax
%%%%%%%% hyperref
-\usepackage{hyperref}
+\usepackage{hyperref,bookmark}
%<*en>
\title{The \LuaTeX-ja package}
\author{The \LuaTeX-ja project team}
@@ -139,7 +142,7 @@
\newenvironment{cslist}{%
%<ja> \leftskip2\zw
%<en> \leftskip2em
- \parindent=0pt\def\makelabel##1{{\tt\char92##1}}
+ \parindent=0pt\def\makelabel##1{{\tt\textbackslash ##1}}
\def\{{\char`\{}\def\}{\char`\}}
\let\origitem=\item
\def\item[##1]{\par\smallskip\par\hskip-\leftskip\makelabel{##1}\par}
@@ -179,7 +182,7 @@
}
\catcode`\<=13
-\def<#1>{{\normalfont\rm\itshape$\langle$#1$\rangle$}}
+\def<#1>{{\normalfont\rm\itshape$\langle$#1\/$\rangle$}}
\maketitle
\tableofcontents
@@ -363,10 +366,10 @@ The followings are major changes from \pTeX:
ちょ{}っと ちょ\/っと
\end{verbatim}
%<*en>
- If you want to do so, please put an empty hbox between it instead:
+ If you want to do so, please put an empty horizontal box (hbox) between it instead:
%</en>
%<*ja>
- もし同じことをやりたければ,空の水平ボックスを間に挟めばよい:
+ もし同じことをやりたければ,空の水平ボックス(hbox)を間に挟めばよい:
%</ja>
\begin{verbatim}
ちょ\hbox{}っと
@@ -465,14 +468,15 @@ and \emph{Japanese fonts} for fonts used in \textbf{JAchar}.
パッケージやクラスを表す.
%</ja>
%<*en>
-\item In this document, natural numbers start from~0.
+\item In this document, natural numbers start from~zero.
+ $\omega$ denotes the set of all natural numbers.
%</en>
%<*ja>
-\item 本ドキュメントでは,自然数は0から始まる.
+\item 本ドキュメントでは,自然数は0から始まる.自然数全体の集合は$\omega$と表記する.
%</ja>
\end{itemize}
-%<en>\subsection{About the project}
+%<en>\subsection{About the Project}
%<ja>\subsection{プロジェクトについて}
%<en>\paragraph{Project Wiki} Project Wiki is under construction.
@@ -534,18 +538,16 @@ and \emph{Japanese fonts} for fonts used in \textbf{JAchar}.
\end{itemize}
%<*en>
-\emph{From this version of \LuaTeX-ja, \TeX~Live~2012 (or older version) is
-no longer supported, since \LuaTeX\ binary and \Pkg{luaotfload} is updated in
-\TeX~Live~2013.}
-And conversely, older versions of \LuaTeX-ja (20130318.1 or earlier) don't work in
-\TeX~Live~2013.
+\emph{This version of \LuaTeX-ja no longer supports \TeX~Live~2012 (or older version),
+since \LuaTeX\ binary and \Pkg{luaotfload} is updated in
+\TeX~Live~2013.}
\medskip
Now \LuaTeX-ja is available from the following archive and distributions:
\begin{itemize}
\item CTAN (in the \texttt{macros/luatex/generic/luatexja} directory)
- \item MiK\TeX\ (in \texttt{luatexja.tar.lzma})
+ \item MiK\TeX\ (in \texttt{luatexja.tar.lzma}); see the next subsection
\item \TeX\ Live (in \texttt{texmf-dist/tex/luatex/luatexja})
\item W32\TeX\ (in \texttt{luatexja.tar.xz})
\end{itemize}
@@ -557,9 +559,8 @@ $ tlmgr install luatexja
\end{verbatim}
%</en>
%<*ja>
-\emph{本バージョン以降の\LuaTeX-jaは\TeX~Live~2012以前では動作しない.}
+\emph{本バージョンの\LuaTeX-jaは\TeX~Live~2012以前では動作しない.}
これは,\LuaTeX と\Pkg{luaotfload}が\TeX~Live~2013において更新されたことによる.
-逆に,20130318.1以前の\LuaTeX-jaは\TeX~Live~2013では動作しない.
\medskip
@@ -677,14 +678,37 @@ Note that \texttt{*.\{dtx,ins\}} and \texttt{ltj-kinsoku\_make.tex} are not need
%</ja>
\end{enumerate}
+%<en>\subsection{Cautions}
+%<ja>\subsection{注意点}
+
+\begin{itemize}
+%<*en>
+\item The encoding of your source file must be UTF-8. No other
+ encodings, such as EUC-JP or Shift-JIS, are not supported.
+%</en>
+%<*ja>
+\item 原稿のソースファイルの文字コードはUTF-8固定である.
+ 従来日本語の文字コードとして用いられてきたEUC-JPやShift-JISは使用できない.
+%</ja>
%<*en>
-\paragraph{Note for MiK\TeX\ Users}
-\LuaTeX-ja requires that two CMap files,
-\texttt{UniJIS2004-UTF32-H} and \texttt{Adobe-Japan1-UCS2},
+\item \LuaTeX-ja is very slower than \pTeX.
+Generally speaking, LuaJIT\TeX\ processes \LuaTeX-ja
+about 30\% faster than \LuaTeX, but not always.
+%</en>
+%<*ja>
+\item \LuaTeX-jaは動作が\pTeX に比べて非常に遅い.
+コードを調整して徐々に速くしているが,まだ満足できる速度ではない.
+LuaJIT\TeX を用いると\LuaTeX のだいたい1.3倍の速度で動くようであるが,
+IPA mj明朝などの大きいフォントを用いた場合には\LuaTeX よりも遅くなることもある.
+%</ja>
+\item%
+%<*en>
+\textbf{Note for MiK\TeX\ users}\quad
+\LuaTeX-ja requires that several CMap files%
+\footnote{\texttt{UniJIS2004-UTF32-H} and \texttt{Adobe-Japan1-UCS2}.}
must be found from \LuaTeX.
Strictly speaking, those CMaps are needed
only in the first run of \LuaTeX-ja after installing or updating.
-
But it seems that MiK\TeX\ does not satisfy this condition,
so you will encounter an error like the following:
%</en>
@@ -713,28 +737,6 @@ run \LuaTeX-ja in this directory, and finally delete the temporaly directory.
コピーし,その中で\LuaTeX-ja の初回起動を行い,作業用ディレクトリを消す作業をしている.
%</ja>
-%<en>\subsection{Cautions}
-%<ja>\subsection{注意点}
-
-\begin{itemize}
-%<*en>
-\item The encoding of your source file must be UTF-8. No other
- encodings, such as EUC-JP or Shift-JIS, are not supported.
-%</en>
-%<*ja>
-\item 原稿のソースファイルの文字コードはUTF-8固定である.
- 従来日本語の文字コードとして用いられてきたEUC-JPやShift-JISは使用できない.
-%</ja>
-%<*en>
-\item \LuaTeX-ja is very slower than \pTeX.
-Using LuaJIT\TeX\ usually improve the situation, but not always.
-%</en>
-%<*ja>
-\item \LuaTeX-jaは動作が\pTeX に比べて非常に遅い.
-コードを調整して徐々に速くしているが,まだ満足できる速度ではない.
-LuaJIT\TeX を用いると\LuaTeX のだいたい1.3倍の速度で動くようであるが,
-IPA mj明朝などの大きいフォントを用いた場合には\LuaTeX よりも遅くなることもある.
-%</ja>
\end{itemize}
%<en>\subsection{Using in plain \TeX}
@@ -942,7 +944,7 @@ Okumura), namely, \Pkg{ltjclasses} and \Pkg{ltjsclasses}.
\paragraph{plain \TeX}
%<*en>
-To change Japanese fonts in plain \TeX, you must use the control sequence
+To change Japanese fonts in plain \TeX, you must use the command
\verb+\jfont+. So please see Subsection~\ref{ssec-jfont}.
%</en>
%<*ja>
@@ -1005,16 +1007,17 @@ auto select&\verb+\fontencoding+&\verb+\fontfamily+&---&---&\verb+\usefont+\\
%</ja>
%<*en>
- \verb+\fontencoding{<encoding>}+ changes the encoding of alphabetic fonts
+ \verb+\fontencoding{+<encoding>\verb+}+ changes the encoding of alphabetic fonts
or Japanese fonts depending on the argument. For example,
\verb+\fontencoding{JY3}+ changes the encoding of Japanese fonts to
- \texttt{JY3}a nd \verb+\fontencoding{T1}+ changes the encoding of
+ \texttt{JY3},and \verb+\fontencoding{T1}+ changes the encoding of
alphabetic fonts to \texttt{T1}.
- \verb+\fontfamily+ also changes the family of Japanese fonts, alphabetic
- fonts, \emph{or both}. For detail, see Subsection~\ref{ssub-nfsspat}.
+ \verb+\fontfamily+ also changes the current Japanese font family,
+ the current alphabetic font family, \emph{or both}.
+ For the detail, see Subsection~\ref{ssub-nfsspat}.
%</en>
%<*ja>
- ここで,\verb+\fontencoding{<encoding>}+ は,引数により和文側か欧文
+ ここで,\verb+\fontencoding{+<encoding>\verb+}+ は,引数により和文側か欧文
側かのどちらかのエンコーディングを変更する.例えば,
\verb+\fontencoding{JY3}+ は和文フォントのエンコーディングを
\texttt{JY3}に変更し,\verb+\fontencoding{T1}+ は欧文フォント側を
@@ -1048,7 +1051,7 @@ auto select&\verb+\fontencoding+&\verb+\fontfamily+&---&---&\verb+\usefont+\\
\end{itemize}
%<*en>
-\paragraph{Remark: Japanese Characters in Math Mode}
+\paragraph{Remark: Japanese characters in math mode}
Since \pTeX\ supports Japanese characters in math mode, there are
sources like the following:
%</en>
@@ -1122,7 +1125,7 @@ package, if needed.
%</ja>
%<*en>
-In \Pkg{luatexja-fontspec} package, the following 7~commands are defined as
+In \Pkg{luatexja-fontspec} package, the following seven~commands are defined as
counterparts of original commands in the \Pkg{fontspec} package:
%</en>
%<*ja>
@@ -1182,7 +1185,7 @@ JIS~X~0208:1990→辻
Note that there is no command named \verb+\setmonojfont+, since it is
popular for Japanese fonts that nearly all Japanese glyphs have same
widths. Also note that the kerning feature is set off by default in
-these 7~commands, since this feature and \textbf{JAglue} will clash (see
+these seven commands, since this feature and \textbf{JAglue} will clash (see
\ref{para-kern}).
%</en>
%<*ja>
@@ -1199,7 +1202,7 @@ featureが\textbf{JAglue}と衝突するためである(\ref{para-kern}節を
%<*en>
To use standard Japanese font settings easily, one can load \Pkg{luatexja-preset}
package with several options. This package provides functions in a part of
-\Pkg{otf} package and a part of \Pkg{PXchfon} package by Takayuki Yato,
+\Pkg{japanese-otf} package and a part of \Pkg{PXchfon} package by Takayuki Yato,
and loads \Pkg{luatexja-fontspec}, hence \Pkg{fontspec} internally.
If you need to pass some options to \Pkg{fontspec}, load \Pkg{fontspec} manually
@@ -1213,7 +1216,7 @@ before \Pkg{luatexja-preset}:
\Pkg{fontspec}を読み込んでいる.
もし\Pkg{fontspec}パッケージに何らかのオプションを渡す必要がある
-\footnote{例えば,数式フォントまで置換されてしまい,\texttt{\char92mathit}によってギリシャ文字の
+\footnote{例えば,数式フォントまで置換されてしまい,\texttt{\textbackslash mathit}によってギリシャ文字の
斜体大文字が出なくなる,など.}場合は,
次のように\Pkg{luatexja-preset}の前に\Pkg{fontspec}を手動で読みこめば良い:
%</ja>
@@ -1242,7 +1245,7 @@ This means that \verb+\mcfamily\bfseries+, \verb+\gtfamily\bfseries+ and
%<*en>
Use \textit{mincho} with two weights (medium~and~bold),
\textit{gothic} with three weights (medium, bold~and~heavy), and \textit{rounded gothic}%
-\footnote{Provided by \texttt{\char92mgfamily} and \texttt{\char92textmg\{...\}},
+\footnote{Provided by \texttt{\textbackslash mgfamily} and \texttt{\textbackslash textmg\{...\}},
because \textit{rounded gothic} is called \textit{maru gothic} (丸ゴシック) in Japanese.}.
The heavy weight of \textit{gothic} can be used by ``changing the family'' \verb+\gtebfamily+,
or \verb+\textgteb{...}+.
@@ -1259,7 +1262,7 @@ bold (\verb+\bfseries+).
%</ja>
\item[expert]
%<*en>
-Use horizontal kana alternates, and define a control sequence \verb+\rubyfamily+ to use kana
+Use horizontal kana alternates, and define a command \verb+\rubyfamily+ to use kana
characters designed for ruby.
%</en>
%<ja>横組専用仮名を用いる.また,\verb+\rubyfamily+ でルビ用仮名が使用可能となる.
@@ -1293,7 +1296,7 @@ We didn't taken account of when both \texttt{90jis} and \texttt{jis2004} are sp
同時に指定された場合の動作については全く考慮していない.
%</ja>
-%<en>\paragraph{Presets for multi weight settings}
+%<en>\paragraph{Presets for multi weight}
%<ja>\paragraph{多ウェイト用プリセットの一覧}
%<*en>
Besides \texttt{morisawa-pro}~and~\texttt{morisawa-pr6n} presets,
@@ -1570,15 +1573,15 @@ are internally specified by:
%<*en>
-\subsection{\texttt{\char`\\CID}, \texttt{\char`\\UTF}, and macros in \Pkg{otf} package}
-Under \pLaTeX, \Pkg{otf} package (developed by Shuzaburo Saito) is
+\subsection{\texttt{\textbackslash CID}, \texttt{\textbackslash UTF}, and macros in \Pkg{japanese-otf} package}
+Under \pLaTeX, \Pkg{japanese-otf} package (developed by Shuzaburo Saito) is
used for typesetting characters which is in Adobe-Japan1-6 CID but not
in JIS~X~0208. Since this package is widely used, \LuaTeX-ja
-supports some of functions in \Pkg{otf} package.
+supports some of functions in \Pkg{japanese-otf} package.
If you want to use these functions, load \Pkg{luatexja-otf} package.
%</en>
%<*ja>
-\subsection{\texttt{\char`\\CID}, \texttt{\char`\\UTF}と\Pkg{otf}パッケージのマクロ}
+\subsection{\texttt{\textbackslash CID}, \texttt{\textbackslash UTF}と\Pkg{otf}パッケージのマクロ}
\pLaTeX では,JIS~X~0208にないAdobe-Japan1-6の文字を出力するために,
齋藤修三郎氏による\Pkg{otf}パッケージが用いられていた.このパッケージは
広く用いられているため,\LuaTeX-jaにおいても\Pkg{otf}パッケージの機能の
@@ -1632,18 +1635,20 @@ parameters, you have to use commands \verb+\ltjsetparameter+ and
用いる.
%</ja>
-%<en>\subsection{Editing the range of \textbf{JAchar}s}
+%<en>\subsection{Editing the Range of \textbf{JAchar}s}
%<ja>\subsection{\textbf{JAchar}の範囲の設定}
\label{ssec-setrange}
%<*en>
-\LuaTeX-ja divides the Unicode codespace into \emph{character ranges},
-numbered 1 to 216. The grouping can be (globally) customized by \verb+\ltjdefcharrange+.
+\LuaTeX-ja divides the Unicode codespace \texttt{U+0080}--\texttt{U+10FFFF}
+into \emph{character ranges},
+numbered 1 to 217. The grouping can be (globally) customized by \verb+\ltjdefcharrange+.
The next line adds whole characters in Supplementary Ideographic Plane
and the character ``漢'' to the character range~100.
%</en>
%<*ja>
-\LuaTeX-jaは,Unicode全体の空間を1番から216番までの\emph{文字範囲}に分割している.
+\LuaTeX-jaは,Unicodeの \texttt{U+0080}--\texttt{U+10FFFF} の空間を
+1番から217番までの\emph{文字範囲}に分割している.
区分けは \verb+\ltjdefcharrange+ を用いることで(グローバルに)変更することができ,
例えば,次は追加漢字面(SIP)にある全ての文字と「漢」を「100番の文字範囲」に追加する.
%</ja>
@@ -1686,8 +1691,9 @@ it sets
\end{verbatim}
%<*en>
The argument to \textsf{jacharrange} parameter is a list of non-zero integer.
-Negative integer $-n$ in the list means that ``each character in the range~$n$ is a \textbf{ALchar}'', and positive integer $+n$ means
-that ``\dots\ is a \textbf{JAchar}''.
+Negative integer $-n$ in the list means that ``each character in the range~$n$ is an
+\textbf{ALchar}'',
+and positive integer $+n$ meansthat ``\dots\ is a \textbf{JAchar}''.
%</en>
%<*ja>
\textsf{jacharrange}パラメータの引数は非零の整数のリストである.
@@ -1696,7 +1702,7 @@ that ``\dots\ is a \textbf{JAchar}''.
%</ja>
%<*en>
-\paragraph{Default Setting}
+\paragraph{Default setting}
\LuaTeX-ja predefines eight character ranges for convenience. They are
determined from the following data:
%</en>
@@ -1715,15 +1721,18 @@ determined from the following data:
\end{itemize}
%<*en>
-Now we describe these eight ranges. The alphabet ``J'' or ``A'' after the
+Now we describe these eight ranges. The superscript ``J'' or ``A'' after the
number shows whether each character in the range is treated as
\textbf{JAchar}s or not by default. These settings are similar to the
\texttt{prefercjk} settings defined in \texttt{PXbase} bundle.
+Any characters above \texttt{U+0080} which does not belong to
+these eight ranges belongs to the character range~217.
%</en>
%<*ja>
-以下ではこれら8つの文字範囲について記述する.番号のあとのアルファベット「J」「A」
+以下ではこれら8つの文字範囲について記述する.添字のアルファベット「J」「A」
は,その文字範囲内の文字が\textbf{JAchar}か\textbf{ALchar}かを表している.これらの設定は
\texttt{PXbase}バンドルで定義されている\texttt{prefercjk}と類似のものである.
+なお,\texttt{U+0080} 以降でこれら8つの文字範囲に属さない文字は,217番の文字範囲に属することになっている.
%</ja>
\begin{description}
%<*en>
@@ -1937,8 +1946,8 @@ The block list is indicated in Table~\ref{table-rng7}.
%<*en>
The value (a skip) of \Param{\hyperlink{fld:kanjiskip}{kanjiskip}} or
\Param{\hyperlink{fld:xks}{xkanjiskip}} can be changed as the following.
-Note that only their values \emph{at the end of a paragraph or a horizontal box are
-adopted in the whole paragraph or the whole horizontal box.
+Note that only their values \emph{at the end of a paragraph or a hbox are
+adopted in the whole paragraph or the whole hbox.
}
%</en>
%<*ja>
@@ -1949,8 +1958,11 @@ adopted in the whole paragraph or the whole horizontal box.
\ltjsetparameter{kanjiskip={0pt plus 0.4pt minus 0.4pt},
xkanjiskip={0.25\zw plus 1pt minus 1pt}}
\end{lstlisting}
-
%<*en>
+Here \verb+\zw+ is a internal dimension
+which stores fullwidth of the current Japanese font.
+This \verb+\zw+ can be used as the unit \texttt{zw} in \pTeX.
+
It may occur that JFM contains the data of ``ideal width of
\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}''
and/or ``ideal width of \Param{\hyperlink{fld:xks}{xkanjiskip}}''.
@@ -1958,6 +1970,9 @@ To use these data from JFM, set the value of \Param{\hyperlink{fld:kanjiskip}{ka
\Param{\hyperlink{fld:xks}{xkanjiskip}} to \verb+\maxdimen+.
%</en>
%<*ja>
+ここで,\verb+\zw+ は現在の和文フォントの全角幅を表す長さであり,
+\pTeX における長さ単位 \texttt{zw} と同じように使用できる.
+
JFMは「望ましい\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}の値」や
「望ましい\Param{\hyperlink{fld:xks}{xkanjiskip}}の値」を持っていることがある.
これらのデータを使うためには,\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}や%
@@ -1993,8 +2008,7 @@ pあq い!う
%<*en>
The second argument \texttt{preonly} means that the insertion of
\Param{\hyperlink{fld:xks}{xkanjiskip}} is allowed before this character, but not after.
-the other possible values are \texttt{postonly}, \texttt{allow}, and \texttt{
-inhibit}.
+the other possible values are \texttt{postonly}, \texttt{allow}, and \texttt{inhibit}.
%</en>
%<*ja>
2つ目の引数の \texttt{preonly}は「\Param{\hyperlink{fld:xks}{xkanjiskip}}の挿入はこの文字の
@@ -2033,7 +2047,7 @@ parameters to \texttt{true}/\texttt{false}, respectively.
\texttt{true}/\texttt{false}に設定すればよい.
%</ja>
-%<en>\subsection{Shifting Baseline}
+%<en>\subsection{Shifting the baseline}
%<ja>\subsection{ベースラインの移動}
%<*en>
To make a match between a Japanese font and an alphabetic font, sometimes
@@ -2142,25 +2156,42 @@ $\Phi\vdash F(x)\ \hbox{for all}\ x\in A$
\label{part-ref}
%<*ja>
-\section{\LuaTeX-jaにおける \texttt{\char92catcode}}
-\subsection{予備知識:\pTeX と\upTeX における \texttt{\char92kcatcode}}
+\section{\LuaTeX-jaにおける \texttt{\textbackslash catcode}}
+\subsection{予備知識:\pTeX と\upTeX における \texttt{\textbackslash kcatcode}}
\pTeX,\upTeX においては,和文文字が制御綴内で利用できるかどうか
は \verb+\kcatcode+ の値によって決定されるのであった.
-\verb+\kcatcode+ の値によってどのように変わるかは表\ref{table-kcat}を参照されたい.
+詳細は表\ref{table-kcat}を参照されたい.
+%</ja>
+%<*en>
+\section{\texttt{\textbackslash catcode} in \LuaTeX-ja}
+\subsection{Preliminaries: \texttt{\textbackslash kcatcode} in \pTeX\ and \upTeX}
+In \pTeX~and~\upTeX, the value of \verb+\kcatcode+ determines
+whether a Japanese character can be used in a control word.
+For the detail, see Table~\ref{table-kcat}.
+%</en>
\begin{table}[t]
\small
-\caption{\texttt{\char92kcatcode} in \upTeX}
+\caption{\texttt{\textbackslash kcatcode} in \upTeX}
\label{table-kcat}
+\medskip
\noindent\hfill
\begin{tabular}{ccccc}
\toprule
\bfseries \verb+\kcatcode+&
+%<*en>
+\bfseries meaning&
+\bfseries control word&
+\bfseries widow penalty\hbox{}$^*$&
+\bfseries linebreak\\
+%</en>
+%<*ja>
\bfseries 意図&
\bfseries 制御綴中に使用&
\bfseries 文字ウィドウ処理\hbox{}$^*$&
\bfseries 直後での改行\\
+%</ja>
\midrule
15&non-cjk&\multicolumn{3}{c}{(treated as usual \LaTeX)}\\
16&kanji&Y&Y&ignored\\
@@ -2172,19 +2203,52 @@ $\Phi\vdash F(x)\ \hbox{for all}\ x\in A$
\medskip
+%<*ja>
文字ウィドウ処理\hbox{}$^*$: 「漢字が一文字だけ次の行に行くのを防ぐ」\
-\texttt{\char`\\jcharwidowpenalty} が,
+\texttt{\textbackslash jcharwidowpenalty} が,
その文字の直前に挿入されうるか否か,を示す.
+%</ja>
\end{table}
+%<*en>
+\verb+\kcatcode+ can be set by a row of JIS~X~0208 in \pTeX,
+and generally by a Unicode block\footnote{%
+ \upTeX\ divides \texttt{U+FF00}--\texttt{U+FFEF} (Halfwidth and Fullwidth Forms)
+ into three subblocks, and \texttt{\textbackslash kcatcode} can be set by a subblock.
+}
+in \upTeX. So characters which can be used in a control word
+slightly differ between \pTeX~and~\upTeX.
+%</en>
+%<*ja>
\pTeX では \verb+\kcatcode+ はJIS~X~0208の区単位,
\upTeX では概ねUnicodeブロック単位\footnote{%
\texttt{U+FF00}--\texttt{U+FFEF} (Halfwidth and Fullwidth Forms)は
「全角英数字」「半角カナ」「その他」と3つに分割されており,
- それぞれ別々に \texttt{\char92kcatcode} が指定できるようになっている.
+ それぞれ別々に \texttt{\textbackslash kcatcode} が指定できるようになっている.
}で設定可能になっている.そのため,\pTeX と\upTeX の初期状態では
制御綴内で使用可能な文字が微妙に異なっている.
+%</ja>
+%<*en>
+\subsection{Case of \LuaTeX-ja}
+The role of \verb+\kcatcode+ in \pTeX~and~\upTeX\ caan be
+divided into the following four kinds,
+and \LuaTeX-ja can control these four kinds separately:
+\begin{itemize}
+ \item
+\emph{Distinction between \textbf{JAchar} or \textbf{ALchar}}
+is controlled by using the character range, see Subsection~\ref{ssec-setrange}.
+ \item
+\emph{Whether the character can be used in a control word}
+is controlled by setting \verb+\catcode+ to 11~(enabled) or 12~(disabled), as usual.
+ \item
+\emph{Whether \Param{jcharwidowpenalty} can be inserted before the character}
+is controlled by the lowermost bit of the \Param{kcatcode} parameter.
+ \item
+\emph{Ignoring linebreak after a \textbf{JAchar}} is always ignored.
+\end{itemize}
+%</en>
+%<*ja>
\subsection{\LuaTeX-jaの場合}
\LuaTeX-jaでは,従来の\pTeX・\upTeX における \verb+\kcatcode+ の役割を
分割している:
@@ -2195,11 +2259,37 @@ $\Phi\vdash F(x)\ \hbox{for all}\ x\in A$
\LuaTeX 自身の \verb+\catcode+ でよい
\item[\Param{jcharwidowpenalty}が挿入可か]
\Param{kcatcode}パラメータの最下位ビット
- \item[改行をスペースと認識するか]
+ \item[直後の改行の無視]
日本語しか想定していないので\textbf{JAchar}については一律有効
\end{description}
+%</ja>
+%<*en>
+Default setting of \verb+\catcode+ of \LuaTeX\ can be found
+in \texttt{luatex-unicode-letters.tex},
+which is based on \texttt{unicode-letters.tex} (for \XeTeX).
+However, the default setting of \verb+\catcode+ differs
+between \XeTeX\ and \LuaTeX, by the following reasons:
+\begin{itemize}
+ \item \texttt{luatex-unicode-letters.tex} is based on old \texttt{unicode-letters.tex}.
+ \item The latter half of \texttt{unicode-letters.tex} sets
+\verb+\catcode+ of Kanji and kana characters to 11,
+via setting \verb+\XeTeXcharclass+.
+
+However, this latter half is simply omitted in
+\texttt{luatex-unicode-letters.tex}, hence
+\verb+\catcode+ of Kanji and kana characters remains 12 in \LuaTeX.
+\end{itemize}
+In other words, Kanji nor kana characters cannot be used in
+a control word, in the default setting of \LuaTeX.
+This would be inconvenient for \pTeX~users to shifting to \LuaTeX-ja,
+since several control words containing Kanji, such as \verb+\西暦+,
+are used in \pTeX.
+Hence, \LuaTeX-ja have a counterpart of \texttt{unicode-letters.tex}
+for \LuaTeX, \emph{to match the \texttt{\textbackslash catcode} setting with that of \XeTeX.}
+%</en>
+%<*ja>
ネイティブにUnicode全部の文字を扱える\XeTeX や\LuaTeX では,
文字が制御綴内で使用できるかは通常の欧文文字と同じく \verb+\catcode+
で指定することとなる.\XeTeX における \verb+\catcode+ の初期設定は\
@@ -2225,64 +2315,85 @@ $\Phi\vdash F(x)\ \hbox{for all}\ x\in A$
\LuaTeX-jaへの移行で手間が生じる.そのため,\LuaTeX-jaでは
\texttt{unicode-letters.tex} の後半部にあたる内容を自前でパッチし,
結果として\textbf{\XeTeX における初期設定と同じになるようにしている.}
+%</ja>
\begin{table}
\centering\small
-\caption{制御綴中に使用出来るJIS~X~0208非漢字の違い}
+%<en>\caption{Difference of the set of non-kanji JIS~X~0208 characters which can be used in a control word}
+%<ja>\caption{制御綴中に使用出来るJIS~X~0208非漢字の違い}
\label{table-kcat-diff}
\def\D#1#2#3#4{%
{\fboxsep0pt\fcolorbox{cyan}{white}%
{\large\char"#1#2#3#4}}\ (\texttt{U+#1#2#3#4})} %"
\leavevmode\hbox to 0pt{\hss\begin{tabular}{cccccc}
\toprule
-&\bf 区&\bf 点&\bf \pTeX&\bf \upTeX&\fontseries{b}\selectfont\LuaTeX-ja\\
+%<en>&\bf row&\bf col.&\bf \pTeX&\bf \upTeX&\bf\LuaTeX-ja\\
+%<ja>&\bf 区&\bf 点&\bf \pTeX&\bf \upTeX&\fontseries{b}\selectfont\LuaTeX-ja\\
\midrule
-\D 3000&1&1&×&×&◯\\
-\D 30FB&1&6&×&◯&×\\
-\D 309B&1&11&×&◯&×\\
-\D 309C&1&12&×&◯&×\\
-\D FF40&1&14&×&×&◯\\
-\D FF3E&1&16&×&×&◯\\
-\D FFE3&1&17&×&×&◯\\
-\D FF3F&1&18&×&×&◯\\
-\D 30FD&1&19&×&◯&◯\\
-\D 30FE&1&20&×&◯&◯\\
-\D 309D&1&21&×&◯&◯\\
-\D 309E&1&22&×&◯&◯\\
-\D 3003&1&23&×&×&◯\\
-\D 4EDD&1&24&×&◯&◯\\
-\D 3005&1&25&×&×&◯\\
-\D 3006&1&26&×&×&◯\\
-\D 3007&1&27&×&×&◯\\
-\D 30FC&1&28&×&◯&◯\\
+\D 3000&1&1&N&N&Y\\
+\D 30FB&1&6&N&Y&N\\
+\D 309B&1&11&N&Y&N\\
+\D 309C&1&12&N&Y&N\\
+\D FF40&1&14&N&N&Y\\
+\D FF3E&1&16&N&N&Y\\
+\D FFE3&1&17&N&N&Y\\
+\D FF3F&1&18&N&N&Y\\
+\D 30FD&1&19&N&Y&Y\\
+\D 30FE&1&20&N&Y&Y\\
+\D 309D&1&21&N&Y&Y\\
+\D 309E&1&22&N&Y&Y\\
+\D 3003&1&23&N&N&Y\\
+\D 4EDD&1&24&N&Y&Y\\
+\D 3005&1&25&N&N&Y\\
+\D 3006&1&26&N&N&Y\\
+\D 3007&1&27&N&N&Y\\
+\D 30FC&1&28&N&Y&Y\\
\bottomrule
\end{tabular}\qquad
\begin{tabular}{cccccc}
\toprule
-&\bf 区&\bf 点&\bf \pTeX&\bf \upTeX&\fontseries{b}\selectfont\LuaTeX-ja\\
+%<en>&\bf row&\bf col.&\bf \pTeX&\bf \upTeX&\bf\LuaTeX-ja\\
+%<ja>&\bf 区&\bf 点&\bf \pTeX&\bf \upTeX&\fontseries{b}\selectfont\LuaTeX-ja\\
\midrule
-\D FF0F&1&31&×&×&◯\\
-\D FF3C&1&32&×&×&◯\\
-\D FF5C&1&35&×&×&◯\\
-\D FF0B&1&60&×&×&◯\\
-\D FF1D&1&65&×&×&◯\\
-\D FF1C&1&67&×&×&◯\\
-\D FF1E&1&68&×&×&◯\\
-\D FF03&1&84&×&×&◯\\
-\D FF06&1&85&×&×&◯\\
-\D FF0A&1&86&×&×&◯\\
-\D FF20&1&87&×&×&◯\\
-\D 3012&2&9&×&×&◯\\
-\D 3013&2&14&×&×&◯\\
-\D FFE2&2&44&×&×&◯\\
-\D 212B&2&82&×&×&◯\\
-\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}ギリシャ文字(6区)}&◯&×&◯\\
-\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}キリル文字(7区)}&×&×&◯\\
+\D FF0F&1&31&N&N&Y\\
+\D FF3C&1&32&N&N&Y\\
+\D FF5C&1&35&N&N&Y\\
+\D FF0B&1&60&N&N&Y\\
+\D FF1D&1&65&N&N&Y\\
+\D FF1C&1&67&N&N&Y\\
+\D FF1E&1&68&N&N&Y\\
+\D FF03&1&84&N&N&Y\\
+\D FF06&1&85&N&N&Y\\
+\D FF0A&1&86&N&N&Y\\
+\D FF20&1&87&N&N&Y\\
+\D 3012&2&9&N&N&Y\\
+\D 3013&2&14&N&N&Y\\
+\D FFE2&2&44&N&N&Y\\
+\D 212B&2&82&N&N&Y\\
+%<en>\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}Greek letters (row 6)}&Y&N&Y\\
+%<en>\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}Cyrillic letters (row 7)}&N&N&Y\\
+%<ja>\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}ギリシャ文字(6区)}&Y&N&Y\\
+%<ja>\multicolumn{3}{c}{$\vphantom{\D 3000}$\hbox{}キリル文字(7区)}&N&N&Y\\
$\vphantom{\D 3000}$\\
\bottomrule
\end{tabular}\hss}\par
\end{table}
+%<*en>
+\subsection{Non-kanji Characters in a Control Word}
+Because the engine differ, so non-kanji JIS~X~0208 characters
+which can be used in a control word differ in \pTeX, in \upTeX,~and~in \LuaTeX-ja.
+Table~\ref{table-kcat-diff} shows the difference.
+Except for four characters ``・'',~``゛'', ``゜'',~``゠'',
+\LuaTeX-ja admits more characters in a control word than \upTeX.
+\emph{Note that the ideographic space~\texttt{U+3000} can be used
+in a control word in \LuaTeX-ja.}
+
+Difference becomes larger, if we consider
+non-kanji JIS~X~0213 characters.
+For the detail, see \url{https://github.com/h-kitagawa/kct}.
+%</en>
+%<*ja>
\subsection{制御綴中に使用出来るJIS非漢字の違い}
エンジンが異なるので,\pTeX, \upTeX, \LuaTeX-ja
@@ -2301,8 +2412,8 @@ JIS~X~0213の範囲に広げると,差異はさらに大きくなる.
%<en>\section{Font Metric and Japanese Font}
%<ja>\section{フォントメトリックと和文フォント}
-%<en>\subsection{\texttt{\char92jfont}}
-%<ja>\subsection{\texttt{\char92jfont} 命令}
+%<en>\subsection{\texttt{\textbackslash jfont}}
+%<ja>\subsection{\texttt{\textbackslash jfont} 命令}
\label{ssec-jfont}
%<*en>
@@ -2329,15 +2440,16 @@ TrueType/OpenTypeフォントにfeatureを指定したものを和文フォン
%<*en>
Note that the defined control sequence
(\verb+\tradgt+ in the example above) using \verb+\jfont+ is not a
-\textit{font\_def} token, hence the input like \verb+\fontname\tradgt+
+\textit{font\_def} token, but a macro.
+Hence the input like \verb+\fontname\tradgt+
causes a error. We denote control sequences which are defined in
\verb+\jfont+ by <jfont\_cs>.
%</en>
%<*ja>
-なお,\verb+\jfont+ で定義されたコントロールシーケンス(上の例だと \verb+\tradgt+)
-は\textit{font\_def}トークンではないので,\verb+\fontname\tradgt+ のような
-入力はエラーとなることに注意する.以下では \verb+\jfont+ で定義された
-コントロールシーケンスを<jfont\_cs>で表す.
+なお,\verb+\jfont+ で定義された制御綴(上の例だと \verb+\tradgt+)
+は\textit{font\_def}トークンではなくマクロである.従って,\verb+\fontname\tradgt+ のような
+入力はエラーとなる.以下では \verb+\jfont+ で定義された
+制御綴を<jfont\_cs>で表す.
%</ja>
\paragraph{JFM}
@@ -2350,7 +2462,7 @@ which JFM will be used for this font by the following keys:
%</en>
%<*ja>
「はじめに」の節で述べたように,JFMは文字と和文組版で自動的に挿入される
-グルー/カーンの寸法情報を持っている.JFMの構造は次の小節で述べる.
+グルー/カーンの寸法情報を持っている.JFMの構造は次の節で述べる.
\verb+\jfont+ 命令の呼び出しの際には,どのJFMを用いるのかを以下のキーで
指定する必要がある:
%</ja>
@@ -2465,8 +2577,8 @@ Bounding Box&\t{ujis}&\t{jis}&\t{min}\\
\ltjsetparameter{jacharrange={-3}}
\end{table}
-%<en>\paragraph{Note: kern feature}
-%<ja>\paragraph{注意:kern feature}
+%<en>\paragraph{Note: \texttt{kern} feature}
+%<ja>\paragraph{注意:\texttt{kern} feature}
\label{para-kern}
%<*en>
Some fonts have information for inter-glyph spacing. However, this
@@ -2538,7 +2650,6 @@ letter-spacing and the width of italic correction are not correct:
\S あいう\/ABC
\end{LTXexample}
-
%<en>\subsection{Prefix \texttt{psft}}
%<ja>\subsection{\texttt{psft}プリフィックス}
\label{ssec-psft}
@@ -2552,8 +2663,8 @@ standard, non-embedded Japanese fonts, namely, ``Ryumin-Light'' and
``GothicBBB-Medium''.
\emph{OpenType font features, such as ``{\tt +jp90}'',
-have no meaning in name-only fonts using this ``{\tt psft:}''\ prefix.
-This is because we can't expect what fonts are actually used by the PDF reader.}
+have no meaning in name-only fonts using ``{\tt psft:}''\ prefix,
+because we can't expect what fonts are actually used by the PDF reader.}
Note that \texttt{extend}~and~\texttt{slant} settings (see~above) are supported
with \texttt{psft} prefix, because they are only simple linear transformations.
%</en>
@@ -2640,7 +2751,7 @@ Please contact the LuaTeX-ja project team.
?
\end{lstlisting}
-%<en>\subsection{Structure of JFM file}
+%<en>\subsection{Structure of a JFM File}
%<ja>\subsection{JFMファイルの構造}
\label{ssec-jfm-str}
%<en>A JFM file is a Lua script which has only one function call:
@@ -2929,7 +3040,8 @@ Furthermore, the glyph is shifted according to values of fields
<priority>は \Pkg{luatexja-adjust} による優先順位付き
行長調整(\ref{ssec-adj}節)が有効なときのみ意味を持つ.
このフィールドは省略可能であり,行調整処理におけるこのglueの優先
- 度を$-2$から$+2$の間の整数で指定する.<priority>の省略時の値
+ 度を$-2$から$+2$の間の整数で指定する.大きい値ほど「伸びやすく,縮みやすい」
+ ことを意味する.省略時の値
は0であり,範囲外の値が指定されたときの動作は未定義である.
<ratio>も省略可能フィールドであり,$-1$から$+1$の実数値をとる.省略時の値は0である.
@@ -2953,14 +3065,25 @@ Furthermore, the glyph is shifted according to values of fields
\end{itemize}
%</ja>
%<*en>
+\
+
Specifies the width of kern or glue which will be inserted
between characters in character class~$i$ and those in character class~$j$.
<priority> is an integer in $[-2,2]$ (treated as 0 if omitted), and this is
used only in line adjustment with priority by \Pkg{luatexja-adjust}
-(see Subsection~\ref{ssec-adj}).
-
-<ratio> is \dots
+(see Subsection~\ref{ssec-adj}). Higher value means the glue is easy to shretch,
+and is also easy to shrink.
+
+<ratio> is also an optional value between $-1$ and 1. For example,
+Thw width of a glue between an ideographic full stop ``。''
+and a fullwidth middle dot ``・'' is three-fourth of fullwidth,
+namely halfwidth from the ideographic full stop, and
+quarter-width from the fullwidth middle dot. In this case,
+we specify <ratio> to
+\[
+ -1\cdot \frac{0.5}{0.5+0.25} + 1 \cdot \frac{0.25}{0.5+0.25} = -\frac13.
+\]
%</en>
@@ -2979,6 +3102,12 @@ used only in line adjustment with priority by \Pkg{luatexja-adjust}
\paragraph{文字クラスの決定}
文字からその文字の属する文字クラスを算出する過程は少々複雑である.
次の内容を一部に含んだ \texttt{jfm-test.lua} を用いて説明する.
+%</ja>
+%<*en>
+\paragraph{Character to character classes}
+We explain how the character class of a character is determined,
+using \texttt{jfm-test.lua} which contains the following:
+%</en>
\begin{lstlisting}
[0] = {
chars = { '漢', 'ヒ*' },
@@ -2991,40 +3120,78 @@ used only in line adjustment with priority by \Pkg{luatexja-adjust}
width = 0.5, height = 0.88, depth = 0.12, italic=0.0,
},
\end{lstlisting}
-句点「。」の幅は二分であるので
+%<ja>句点「。」の幅は二分であるので
+%<en>Now consider the following input/output:
\begin{LTXexample}[width=0.3\textwidth]
\jfont\a=file:KozMinPr6N-Regular.otf:jfm=test;+vert
\setbox0\hbox{\a 。\inhibitglue 漢}
\the\wd0
\end{LTXexample}
+%<*en>
+Now we look why the above source outputs 20\,pt, not 15\,pt.
+\begin{enumerate}
+\item The ideographic full stop ``。'' is converted to its vertical form ``\char"FE12''~(\texttt{U+FE12}), %"
+by \verb+vert+ feature.
+\item The character class of ``\char"FE12'' is zero, hence its width is fullwidth.%"
+\item The character class of ``漢'', hence its width is fullwidth.
+\item \verb+\inhibitglue+ makes that no glue will be inserted between ``。'' and ``漢''.
+\item Hence the width of \verb+\hbox+ equals to 20\,pt.
+\end{enumerate}
+This example shows that the character class of a character is determined \emph{after
+applying font features by \Pkg{luaotfload}}.
+%</en>
+%<*ja>
では,全角二分(15.0\,pt)となるのが自然……と思うかもしれないが,上の実行結果では20\,ptとなっている.
それは以下の事情によるものである:
\begin{enumerate}
-\item \verb+vert+ featureによって句点が縦書き用のグリフと置き換わる(\Pkg{luaotfload} による処理).
-\item しかしこのグリフは「文字コード」\texttt{U+F0000}以降とみなされている
-(実際にいくらになるかは,フォントによって異なる).
-\item よって,文字クラス0とみなされるため,結果として「。」の幅は全角だと認識されてしまう.
+\item \verb+vert+ featureによって句点(\texttt{U+3002})が縦書き用のグリフと置き換わる(\Pkg{luaotfload} による処理).
+\item この縦書き用句点のグリフは \texttt{U+FE12} であるため,その文字クラスは0となる.
+\item 以上により文字クラス0とみなされるため,結果として「。」の幅は全角だと認識されてしまう.
\end{enumerate}
+この例は,\emph{文字クラスの決定はfont featureの適用によるグリフ置換の後に行われる}ことを
+示している.
+%</ja>
-一方,「\texttt{'、*'}」のようにアスタリスクつきの指定があると,
-状況は異なってくる.
+%<*en>
+However, a starred specificaion like ``\texttt{'、*'}'' changes the rule.
+Consider the following input:
+%</en>
+%<*ja>
+但し,「\texttt{'、*'}」のようにアスタリスクつきの指定があると,
+状況は異なる.
+%</ja>
\begin{LTXexample}[width=0.3\textwidth]
\jfont\a=file:KozMinPr6N-Regular.otf:jfm=test;+vert
\a 漢、\inhibitglue 漢
\end{LTXexample}
-ここで,読点「、」の文字クラスは,以下のようにして決まる.
+%<*en>
+Here, the character class of the ideographic comma ``、''~(\texttt{U+3001}) is determined
+as following:
+\begin{enumerate}
+\item As the case of ``。'', the ideographic comma ``、'' is converted to its vertical
+ form ``\char"FE11''~(\texttt{U+FE11}).%"
+\item The character class of ``\char"FE11'' is zero.
+\item However, \LuaTeX-ja remembers that this ``\char"FE11'' is obtained from ``、'' by
+ font features. The character class of ``、'' is \emph{non-zero value}, namely, 2000.
+\item Hence the ideographic comma ``、'' in above belongs the character class~2000.
+\end{enumerate}
+%</en>
+%<*ja>
+ここで,読点「、」(\texttt{U+3001})の文字クラスは,以下のようにして決まる.
\begin{enumerate}
\item とりあえず句点の時と同じように,\Pkg{luaotfload} によって縦書き用読点のグリフに置き換わる.
-\item 置換後のグリフの「文字コード」は\texttt{U+F0000}以降であり,
-そのままでは文字クラスは0と判定される.
-\item ところが,JFMには「\texttt{'、*'}」指定があるので,置換前の横書き用読点のグリフ「、」(\texttt{U+3001})によって文字クラスを判定する.
+\item 置換後のグリフは \texttt{U+FE11} であり,そのままでは文字クラスは0と判定される.
+\item ところが,JFMには「\texttt{'、*'}」指定があるので,置換前の横書き用読点のグリフによって文字クラスを判定する.
\item 結果として,上の出力例中の読点の文字クラスは2000となる.
\end{enumerate}
+%</ja>
-なお,置換後のグリフで判定した文字クラスの値が0でなければ,そちらをそのまま作用する.
+%<*ja>
+なお,「\texttt{'\hbox{}ヒ*'}」のようにアスタリスクつきの指定があっても,
+置換後のグリフで判定した文字クラスの値が0でなければ,そちらをそのまま作用する.
\begin{LTXexample}[width=0.3\textwidth]
\jfont\a=file:KozMinPr6N-Regular.otf:jfm=test;+hwid
-\a 漢ヒひ
+\a 漢ヒひ
\end{LTXexample}
上の例では,
\texttt{hwid} featureにより,「ヒ」が半角の「ヒ」に置き換わるが,
@@ -3053,8 +3220,8 @@ The following is the list of imaginary characters:
%%<ja>JFMやサイズが異なる2つの\textbf{JAchar}の間の境界として用いられる.
\item['boxbdd']
-%<en>The beginning/ending of a horizontal box, and the beginning of a noindented paragraph.
-%<ja>水平ボックスの先頭と末尾,及びインデントされていない(\verb+\noindent+ で開始された)段落の先頭を表す.
+%<en>The beginning/ending of a hbox, and the beginning of a noindented (i.e., began by \verb+\noindent+) paragraph.
+%<ja>hboxの先頭と末尾,及びインデントされていない(\verb+\noindent+ で開始された)段落の先頭を表す.
\item['parbdd']
%<en>The beginning of an (indented) paragraph.
@@ -3075,7 +3242,7 @@ The following is the list of imaginary characters:
% ToDo: English version.
%<*en>
-\ldots
+See Japanese version of this manual.
%</en>
%<*ja>
@@ -3098,7 +3265,7 @@ The following is the list of imaginary characters:
文字クラスに関してはグルー/カーンの設定はしない.
これは,\pTeX では,
- 水平ボックスの先頭・末尾とインデントされていない(\verb+\noindent+ で開始さ
+ hboxの先頭・末尾とインデントされていない(\verb+\noindent+ で開始さ
れた)段落の先頭にはJFMグルーは入らないという仕様を実現させるためである.
\item \pTeX の組版を再現させようというのが目的であれば以上の注意を守れば十分である.
@@ -3112,7 +3279,7 @@ The following is the list of imaginary characters:
\texttt{'parbdd'}を入れれば全角下がりとなる.
\begin{LTXexample}[width=0.4\textwidth]
-\jfont\g=file:KozMinPr6N-Regular.otf:jfm=test \g
+\jfont\g=KozMinPr6N-Regular:jfm=test \g
\parindent1\zw\noindent{}◆◆◆◆◆
\par 「◆◆←二分下がり
\par 【◆◆←全角下がり
@@ -3162,7 +3329,7 @@ you can set both \verb+\fam+ and \verb+\jfam+ to the same value.
%</ja>
\begin{table}[!tb]
-%<en>\caption{Control sequences for Japanese math fonts}
+%<en>\caption{Commands for Japanese math fonts}
%<ja>\caption{和文数式フォントに対する命令}
\label{tab-math}
\centering
@@ -3184,7 +3351,7 @@ you can set both \verb+\fam+ and \verb+\jfam+ to the same value.
%<ja>\subsection{コールバック}
%<*en>
-Like \LuaTeX\ itself, \LuaTeX-ja also has callbacks. These callbacks can
+\LuaTeX-ja also has several callbacks. These callbacks can
be accessed via \verb+luatexbase.add_to_callback+ function and so on, as other callbacks.
%</en>
%<*ja>
@@ -3231,11 +3398,11 @@ An example of this callback is the \texttt{ltjarticle} class, with
\texttt{jfm-min.lua}中の\texttt{'parbdd'}を強制的にクラス0に割り当てている.
%</ja>
-%<en>\item[\texttt{luatexja.define\_font} callback]
-%<ja>\item[\texttt{luatexja.define\_font}コールバック]
+%<en>\item[\texttt{luatexja.define\_jfont} callback]
+%<ja>\item[\texttt{luatexja.define\_jfont}コールバック]
%<*en>
-This callback and the next callback form a pair, and you can assign letters which don't have
- fixed code points in Unicode to non-zero character classes.
+This callback and the next callback form a pair, and you can assign characters
+ which do not have fixed code points in Unicode to non-zero character classes.
This \texttt{luatexja.define\_font} callback is called just when new Japanese font is loaded.
%</en>
%<*ja>
@@ -3249,54 +3416,101 @@ function (<table> jfont_info, <number> font_number)
return <table> new_jfont_info
end
\end{lstlisting}
-
%<*en>
-You may assume that \verb+jfont_info+ has the following fields:
-%</en>
-%<*ja>
-\verb+jfont_info+ は以下の2フィールドを持つ:
-%</ja>
+\verb+jfont_info+ has the following fields,
+\emph{which may not overwritten by a user}:
\begin{description}
-\item[\tt size\_cache]
-%<*ja>
-使用されているJFMの情報が格納されているテーブルで,
-\emph{このテーブルを書き換えてはならない}.
-中身はほぼJFMファイルに書かれている唯一のテーブルであるが,次のように若干変わっている:
+\item[\texttt{size}]
+The font size specified at \verb+\jfont+ in scaled points ($1\,\mathrm{sp}=2^{-16}\,\mathrm{pt}$).
+\item[\texttt{zw}, \texttt{zh}, \texttt{kanjiskip}, \texttt{xkanjiskip}]
+These are scaled value of those specified by the JFM, by the font size.
+\item[\texttt{jfm}]
+The internal number of the JFM.
+\item[\texttt{var}]
+The value of \texttt{jfmvar}~key, which is specified at \verb+\jfont+.
+The default value is the empty string.
+\item[\texttt{chars}]
+The mapping table from character codes to its character classes.\\
+The specification \texttt{[i].chars=\{<character>, ...\}} in the JFM will be stored in this
+ field as \texttt{chars=\{[<character>]=\,$i$, ...\}}.
+\item[\texttt{char\_type}]
+For $i\in\omega$, \texttt{char\_type[$i$]} is information of characters whose class is
+ $i$, and has the following fields:
\begin{itemize}
-\item 各文字クラス$i$に属する文字達のテーブル\
-\texttt{[$i$].chars=\{<character>, ...\}} は,トップレベルにまとめられ,
-\texttt{chars=\{[<character>]=\,$i$, ...\}} という形になっている.
-\item \texttt{zw},~\texttt{zh}, \texttt{kanjiskip},~\texttt{xkanjiskip} の各フィールドの値は,
-実際に使われるフォントサイズに合わせたsp ($1\,\mathrm{sp}=2^{-16}\,\mathrm{pt}$)単位の長さに変わっている.
-\item 各文字クラス$i$の情報を格納したテーブルも,\texttt{char\_type} フィールドの下にまとめられている.
-例えば,文字クラス1に属する文字の高さは \texttt{char\_type[1].height} で参照できる.
-\item \texttt{dir} フィールドはこのテーブルにはない.
+ \item \texttt{width},~\texttt{height}, \texttt{depth},
+ \texttt{italic}, \texttt{down},~\texttt{left}\ are just
+ scaled value of those specified by the JFM, by the font size.
+ \item \texttt{align} is a number which is determined from \texttt{align}~field in the JFM:
+\[
+ \begin{cases}
+ 0&\text{\texttt{'left'} and the default value}\\0.5&\text{\tt 'middle'}\\1&\text{\tt 'right'}
+ \end{cases}
+\]
+\item For $j\in \omega$, \texttt{[$j$]} stores a kern or a glue which will be inserted
+between character class~$i$ and class~$j$.
+
+If a kern will be inserted, the value of this field is \texttt{[$j$]=\{false, <kern\_node>, <ratio>\}},
+where <kern\_node> is a node\footnote{%
+ This version of \LuaTeX-ja uses ``direct access
+ model'' for accessing nodes, if possible. }.
+If a glue will be inserted, we have \texttt{[$j$]=\{false, <spec\_node>, <ratio>, <icflag>\}},
+where <spec\_node> is also a node, and $\text{<icflag>}=\textit{from\_jfm}+\text{<priority>}$.
\end{itemize}
-%</ja>
-%<*en>
-A table which contains the information of a JFM, and \emph{this table must not be changed}.
-The contents of this table are similar to that which is written is the JFM file, but
-the following differ:
+\end{description}
+%</en>
+%<*ja>
+\verb+jfont_info+ は最低限以下のフィールドを持つが,これらを書き換えてはならない:
+\begin{description}
+\item[\texttt{size}]
+実際に使われるフォントサイズ(sp単位).$1\,\mathrm{sp}=2^{-16}\,\mathrm{pt}$.
+\item[\texttt{zw}, \texttt{zh}, \texttt{kanjiskip}, \texttt{xkanjiskip}]
+JFMファイルで指定されているそれぞれの値をフォントサイズに合わせてスケーリングしたものを
+sp単位で格納している.
+\item[\texttt{jfm}]
+利用されているJFMを識別するための番号.
+\item[\texttt{var}]
+\verb+\jfont+で指定された \texttt{jfmvar} キーの値(未指定のときは空文字列).
+\item[\texttt{chars}]
+文字コードから文字クラスへの対応が記述されたテーブル.\\
+JFM内の \texttt{[i].chars=\{<character>, ...\}} という指定は\
+\texttt{chars=\{[<character>]=\,$i$, ...\}} という形式に変換されている.
+\item[\texttt{char\_type}]
+$i\in\omega$に対して,\texttt{char\_type[$i$]} は文字クラス$i$の文字の寸法を格納しており,
+以下のフィールドを持つ.
\begin{itemize}
-\item There is a \texttt{chars} table, \dots
-\item The value in \texttt{zw},~\texttt{zh}, \texttt{kanjiskip},~\texttt{xkanjiskip} fields are
-now scaled by real font size, and in scaled-pont unit.
-\item ...
-\item There is no \texttt{dir} field in this table.
+ \item \texttt{width},~\texttt{height}, \texttt{depth},
+ \texttt{italic}, \texttt{down},~\texttt{left}\ は
+JFMで指定されているそれぞれの値をスケーリングしたものである.
+ \item \texttt{align} はJFMで指定されている値によって,
+\[
+ \begin{cases}
+ 0&\text{\texttt{'left'}や省略時}\\0.5&\text{\tt 'middle'}\\1&\text{\tt 'right'}
+ \end{cases}
+\]
+のいずれかの値をとる.
+\item $j\in \omega$に対して,\texttt{[$j$]} は文字クラス$i$の文字と$j$の文字の間に挿入されるkern
+ やglueを格納している.
+間に入るものがkernであれば,このフィールドの値は\
+\texttt{[$j$]=\{false, <kern\_node>, <ratio>\}} である.
+<kern\_node>はkernを表すノードそのものである\footnote{%
+本バージョンでは利用可能ならばノードのアクセス手法にdirect access
+ modelを用いている.そのため,例えば\LuaTeX\ beta-0.78.2では,単なる自然数のようにし
+ か見えないことに注意.
+}.
+glueであれば,\texttt{[$j$]=\{false, <spec\_node>, <ratio>, <icflag>\}} である.
+<spec\_node>はglueの長さを表すノードそのものであり,
+ $\text{<icflag>}=\textit{from\_jfm}+\text{<priority>}$である.
\end{itemize}
-%</en>
-
-\item[\tt var]
-%<en>The value specified in \texttt{jfmvar=...} at a call of \verb+\jfont+.
-%<ja>\verb+\jfont+ の呼び出しの際に\texttt{jfmvar=...}で指定された値.
\end{description}
+%</ja>
%<*en>
-The returned table \verb+new_jfont_info+ also should include these two fields.
+The returned table \verb+new_jfont_info+ also should include these fields, but
+you are free to add more fields (to use them in the \texttt{luatexja.find\_char\_class} callback).
The \verb+font_number+ is a font number.
%</en>
%<*ja>
-戻り値の \verb+new_jfont_info+ テーブルもこれら2つのフィールドを含まなければならないが,
+戻り値の \verb+new_jfont_info+ テーブルも上に述べたフィールドをそのまま含まなければならないが,
それ以外にユーザが勝手にフィールドを付け加えることは自由である.
\verb+font_number+ はフォント番号である.
%</ja>
@@ -3371,12 +3585,12 @@ end
%<*en>
The argument \verb+shift_info+ and the returned \verb+new_shift_info+ have
\texttt{down} and \texttt{left} fields, which are the amount of shifting
- down/left the character in a scaled-point.
+ down/left the character in a scaled point.
%</en>
%<*ja>
引数 \verb+shift_info+ と戻り値の \verb+new_shift_info+ は
\texttt{down}と\texttt{left}のフィールドを持ち,これらの値は
-文字の下/左へのシフト量(スケールド・ポイント単位)である.
+文字の下/左へのシフト量(sp単位)である.
%</ja>
%<*en>
@@ -3413,11 +3627,12 @@ Then, the position of glyphs is shifted up by
%<en>\section{Parameters}
%<ja>\section{パラメータ}
-\subsection{\texttt{\char`\\ltjsetparameter}}
+\subsection{\texttt{\textbackslash ltjsetparameter}}
+\label{ssec-param}
%<*en>
As described before, \verb+\ltjsetparameter+ and \verb+\ltjgetparameter+ are
-control sequences for accessing most parameters of \LuaTeX-ja. One of the main
+commands for accessing most parameters of \LuaTeX-ja. One of the main
reason that \LuaTeX-ja didn't adopted the syntax similar to that of \pTeX\
(\textit{e.g.},~\verb+\prebreakpenalty`)=10000+)
is the position of \verb+hpack_filter+ callback in the source
@@ -3428,11 +3643,11 @@ of \LuaTeX, see Section~\ref{sec-para}.
\LuaTeX-jaのほとんどのパラメータにアクセスするための命令である.
\LuaTeX-jaが\pTeX のような文法(例えば,\verb+\prebreakpenalty`)=10000+)を
採用しない理由の一つは,\LuaTeX のソースにおける \verb+hpack_filter+
-コールバックの位置にある.\ref{sec-para}節を参照.
+コールバックの位置にある.\ref{sec-para}章を参照.
%</ja>
%<*en>
-\verb+\ltjsetparameter+ and \verb+\ltjglobalsetparameter+ are control sequences
+\verb+\ltjsetparameter+ and \verb+\ltjglobalsetparameter+ are commands
for assigning parameters. These take one argument which is a
\texttt{<key>=<value>} list.
The list of allowed keys are described in the next subsection.
@@ -3456,38 +3671,6 @@ like other assignment.
%</ja>
%<*en>
-\verb+\ltjgetparameter+ is for acquiring parameters. It
-always takes a parameter name as first argument, and also takes the
-additional argument---a character code, for example---in some cases.
-%</en>
-%<*ja>
-\verb+\ltjgetparameter+ はパラメータの値を取得するための命令であり,
-常にパラメータの名前を第一引数にとる.
-そして,いくつかの場合には加えてさらに引数(例えば文字コード)をとる.
-%</ja>
-\begin{LTXexample}
-\ltjgetparameter{differentjfm},
-\ltjgetparameter{autospacing},
-\ltjgetparameter{prebreakpenalty}{`)}.
-\end{LTXexample}
-%<*en>
-\emph{The return value of\/ {\normalfont\tt\char92ltjgetparameter} is
-always a string}. This is outputted by \texttt{tex.write()}, so any
-character other than space~``\texttt{\char32}''~(\texttt{U+0020}) has the category code
-12~(other), while the space has 10~(space).
-%</en>
-%<*ja>
-\emph{{\normalfont\tt\char92ltjgetparameter}の戻り値は常に文字列である.}
-これは\texttt{tex.write()}によって出力しているためで,空白「\texttt{\char32}」
-(\texttt{U+0020})を除いた文字のカテゴリーコードは全て12~(other)となる.
-一方,空白のカテゴリーコードは10~(space)である.
-%</ja>
-
-%<en>\subsection{List of Parameters}
-%<ja>\subsection{パラメータ一覧}
-\label{ssec-param}
-
-%<*en>
The following is the list of parameters which can be specified by the
\verb+\ltjsetparameter+ command. [\verb+\cs+] indicates the counterpart
in \pTeX, and symbols beside each parameter has the following meaning:
@@ -3499,11 +3682,11 @@ in \pTeX, and symbols beside each parameter has the following meaning:
%</ja>
\begin{itemize}
%<*en>
-\item ``\ast'' : values at the end of a paragraph or a horizontal box are
-adopted in the whole paragraph or the whole horizontal box.
+\item ``\ast'' : values at the end of a paragraph or a hbox are
+adopted in the whole paragraph or the whole hbox.
%</en>
%<*ja>
-\item ``\ast'':段落や水平ボックスの終端での値がその段落/水平ボックス全体で用いられる.
+\item ``\ast'':段落やhboxの終端での値がその段落/hbox全体で用いられる.
%</ja>
%<*en>
\item ``\dagger'': assignments are always global.
@@ -3581,7 +3764,11 @@ Set a penalty which is inserted automatically after the character <chr\_code>,
to prevent a line ends with this character.
\pTeX\ has following restrictions on \verb+\prebreakpenalty+ and \verb+\postbreakpenalty+,
but they don't exist in \LuaTeX-ja:
-\dots
+\begin{itemize}
+ \item Both \verb+\prebreakpenalty+ and \verb+\postbreakpenalty+ cannot be set
+for the same character.
+ \item We can set \verb+\prebreakpenalty+ and \verb+\postbreakpenalty+ up to 256~characters.
+\end{itemize}
%</en>
\item[\Param{jatextfont}\,=\{<jfam>,<jfont\_cs>\}$^\ast$]
@@ -3704,15 +3891,164 @@ The default value is \texttt{paverage}. \dots
\item[\Param{kansujichar}\,=\{<digit>, <chr\_code>\}$^\ast$] [\verb+\kansujichar+]
\end{list}
+\subsection{\texttt{\textbackslash ltjgetparameter}}
+\label{ssec-getpar}
+%<*en>
+\verb+\ltjgetparameter+ is a conteol sequence for acquiring parameters. It
+always takes a parameter name as first argument.
+%</en>
+%<*ja>
+\verb+\ltjgetparameter+ はパラメータの値を取得するための命令であり,
+常にパラメータの名前を第一引数にとる.
+%</ja>
+\begin{LTXexample}
+\ltjgetparameter{differentjfm},
+\ltjgetparameter{autospacing},
+\ltjgetparameter{kanjiskip},
+\ltjgetparameter{prebreakpenalty}{`)}.
+\end{LTXexample}
+
+%<*en>
+\emph{The return value of\/ {\normalfont\tt\textbackslash ltjgetparameter} is
+always a string}. This is outputted by \texttt{tex.write()}, so any
+character other than space~``\texttt{\char32}''~(\texttt{U+0020}) has the category code
+12~(other), while the space has 10~(space).
+%</en>
+%<*ja>
+\emph{{\normalfont\tt\textbackslash ltjgetparameter}の戻り値は常に文字列である.}
+これは\texttt{tex.write()}によって出力しているためで,空白「\texttt{\char32}」
+(\texttt{U+0020})を除いた文字のカテゴリーコードは全て12~(other)となる.
+一方,空白のカテゴリーコードは10~(space)である.
+%</ja>
-%<en>\section{Other Control Sequences for plain \TeX\ and \LaTeXe}
+\begin{itemize}
+\item
+%<*en>
+If first argument is one of the
+following, no additional argument is needed.
+%</en>
+%<*ja>
+第1引数が次のいずれかの場合には,追加の引数は必要ない.
+%</ja>
+\begin{quote}
+\sffamily
+jcharwidowpenalty, yjabaselineshift, yalbaselineshift, autospacing, autoxspacing,\\
+kanjiskip, xkanjiskip, differentjfm
+\end{quote}
+%<*en>
+Note that \verb+\ltjgetparameter{autospacing}+~and~\verb+\ltjgetparameter{autoxspacing}+
+returns 1 or 0, not
+\texttt{true}~nor~\texttt{false}.
+%</en>
+%<*ja>
+\verb+\ltjgetparameter{autospacing}+ と \verb+\ltjgetparameter{autoxspacing}+ は,
+\texttt{true}や\texttt{false}を返すの\emph{ではなく},
+1と0のいずれかを返すことに注意,
+%</ja>
+
+\item
+%<*en>
+If first argument is one of the
+following, an additional argument---a character code, for example---is needed.
+%</en>
+%<*ja>
+第1引数が次のいずれかの場合には,さらに文字コードを第二引数としてとる.
+%</ja>
+\begin{quote}
+\sffamily
+kcatcode, prebreakpenalty, postbreakpenalty, jaxspmode, alxspmode
+\end{quote}
+%<*en>
+\verb+\ltjgetparameter{jaxspmode}{...}+~and~\verb+\ltjgetparameter{alxspmode}{...}+
+returns 0,~1, 2,~or~3, instead of \texttt{preonly} etc.
+%</en>
+%<*ja>
+\verb+\ltjgetparameter{jaxspmode}{...}+ や \verb+\ltjgetparameter{alxspmode}{...}+\
+は,\texttt{preonly} などといった文字列ではなく,0から3までの値を返す.
+%</ja>
+
+\item
+%<*en>
+\verb+\ltjgetparameter{jacharrange}{+<range>\verb+}+ returns \texttt{0}
+if ``characters which belong to the character range~<range> are \textbf{JAchar}'',
+\texttt{1} if ``\dots are \textbf{ALchar}''.
+Although there is no character range~$-1$, specifying $-1$ to <range> does not cause an
+ error (returns 1).
+%</en>
+%<*ja>
+\verb+\ltjgetparameter{jacharrange}{+<range>\verb+}+ は,<range>が\textbf{JAchar}達の
+範囲ならば0を,そうでなければ1を返す.「$-1$番の文字範囲」は存在しないが,<range>に$-1$を
+指定してもエラーは発生しない(1を返す).
+%</ja>
+
+\item
+%<*en>
+For an integer~<digit> between 0~and~9,
+ \verb+\ltjgetparameter{kansujichar}{+<digit>\verb+}+ returns the character code
+of the result of \verb+\kansuji+<digit>.
+%</en>
+%<*ja>
+0--9の数<digit>に対して,
+\verb+\ltjgetparameter{kansujichar}{+<digit>\verb+}+ は,\verb+\kansuji+<digit>で出力され
+ る文字の文字コードを返す.
+%</ja>
+
+
+\item
+%<*en>
+The following parameter names \emph{cannot be specified} in \verb+\ltjgetparameter+.
+%</en>
+%<*ja>
+次のパラメータ名を \verb+\ltjgetparameter+ に指定することはできない.
+%</ja>
+\begin{quote}
+\sffamily
+jatextfont, jascriptfont, jascriptscriptfont, jacharrange
+\end{quote}
+
+\item
+%<*en>
+\verb+\ltjgetparameter{chartorange}{+<chr\_code>\verb+}+ returns
+the range number which <chr\_code> belongs to
+(although there is no parameter named ``chartorange'').
+
+If <chr\_code> is between 0 and 127, this <chr\_code> does not belong to
+any character range. In this case,
+ \verb+\ltjgetparameter{chartorange}{+<chr\_code>\verb+}+
+returns $-1$.
+
+Hence, one can know whether <chr\_code> is \textbf{JAchar} or not
+by the following:
+%</en>
+%<*ja>
+\verb+\ltjgetparameter{chartorange}{+<chr\_code>\verb+}+ によって
+<chr\_code>の属する文字範囲の番号を知ることができる.
+
+<chr\_code>に0--127の値を指定した場合(このとき,<chr\_code>が属する
+文字範囲は存在しない)は$-1$が返る.
+
+そのため,<chr\_code>が\textbf{JAchar}か\textbf{ALchar}かは
+次で知ることができる:
+%</ja>
+\begin{quote}
+\ttfamily \verb+\ltjgetparameter{jacharrange}{\ltjgetparameter{chartorange}{+%
+ <chr\_code>\verb+}}+\\\null\hfill\verb+% 0 if JAchar, 1 if ALchar+
+\end{quote}
+
+\end{itemize}
+
+
+
+
+%<en>\section{Other Commands for plain \TeX\ and \LaTeXe}
%<ja>\section{plainでも\LaTeX でも利用可能なその他の命令}
-%<en>\subsection{Control Sequences for Compatibility with \pTeX}
+%<en>\subsection{Commands for Compatibility with \pTeX}
%<ja>\subsection{\pTeX 互換用命令}
%<*en>
-The following control sequences are implemented for compatibility with \pTeX.
-Note that these don't support JIS~X~0213, but only JIS~X~0208.
+The following commands are implemented for compatibility with \pTeX.
+Note that the former five commands don't support JIS~X~0213, but only JIS~X~0208.
+The last \verb+\kansuji+ converts an integer into its Chinese numerals.
%</en>
%<*ja>
以下の命令は\pTeX との互換性のために実装されている.そのため,JIS~X~0213には対応せず,
@@ -3722,7 +4058,7 @@ Note that these don't support JIS~X~0213, but only JIS~X~0208.
\verb+\kuten+, \verb+\jis+, \verb+\euc+, \verb+\sjis+, \verb+\jis+, \verb+\kansuji+
\end{center}
%<*en>
-These 6 control sequence takes an internal integer, and returns a \emph{string}.
+These six commands takes an internal integer, and returns a \emph{string}.
%</en>
%<*ja>
これら6命令は内部整数を引数とするが,実行結果は\textbf{文字列}であることに注意.
@@ -3735,10 +4071,19 @@ These 6 control sequence takes an internal integer, and returns a \emph{string}.
\kansuji1701
\end{LTXexample}
+%<*en>
+To change characters of Chinese numerals for each digit, set \Param{kansujichar} parameter:
+\begin{LTXexample}
+\ltjsetparameter{kansujichar={1,`壹}}
+\ltjsetparameter{kansujichar={7,`漆}}
+\ltjsetparameter{kansujichar={0,`零}}
+\kansuji1701
+\end{LTXexample}
+%</en>
-%<en>\subsection{\texttt{\char`\\inhibitglue}}
-%<ja>\subsection{\texttt{\char`\\inhibitglue}}
+%<en>\subsection{\texttt{\textbackslash inhibitglue}}
+%<ja>\subsection{\texttt{\textbackslash inhibitglue}}
%<*en>
\verb+\inhibitglue+ suppresses the insertion of \textbf{JAglue}.
The following is an example, using a special JFM that there will be a glue between
@@ -3750,7 +4095,7 @@ the beginning of a box and ``あ'', and also between ``あ''~and~``ウ''.
ある.
%</ja>
-\begin{LTXexample}
+\begin{LTXexample}[width=0.4\textwidth]
\jfont\g=file:KozMinPr6N-Regular.otf:jfm=test \g
\fbox{\hbox{あウあ\inhibitglue ウ}}
\inhibitglue\par\noindent あ1
@@ -3806,9 +4151,38 @@ With the help of this example, we remark the specification of \verb+\inhibitglue
\end{itemize}
-\subsection{\texttt{\char`\\ltjdeclarealtfont}}
+\subsection{\texttt{\textbackslash ltjdeclarealtfont}}
\label{ssec-altfont}
-%<en>\dots
+%<*en>
+Using \verb+\ltjdeclarealtfont+, one can ``compose'' more than one Japanese fonts.
+This \verb+\ltjdeclarealtfont+ uses in the following form:
+\begin{quote}
+\ttfamily \textbackslash ltjdeclarealtfont<base\_font\_cs><alt\_font\_cs>{<range>}
+\end{quote}
+where <base\_font\_cs>~and~<alt\_font\_cs> are defined by \verb+\jfont+.
+Its meaning is
+\begin{quote}
+If the current Japanese font is <base\_font\_cs>, characters which belong to <range>
+is typeset by another Japanese font <alt\_font\_cs>, instead of <base\_font\_cs>.
+\end{quote}
+
+<range> is a comma-separated list of character codes, but also accepts negative integers:
+$-n$~($n≥1$) means that all characters of character classes~$n$, with respect to JFM used
+by <base\_font\_cs>. Note that characters which do not exist in <alt\_font\_cs> are
+ignored.
+
+For example, if \verb+\hoge+ uses \texttt{jfm-ujis.lua}, the standard JFM of \LuaTeX-ja,
+then
+\begin{verbatim}
+\ltjdeclarealtfont\hoge\piyo{"3000-"30FF, {-1}-{-1}}
+\end{verbatim}
+does
+\begin{quote}
+If the current Japanese font is \verb+\hoge+, \texttt{U+3000}--\texttt{U+30FF}
+and characters in class~1 (ideographic opening brackets)
+are typeset by \verb+\piyo+.
+\end{quote}
+%</en>
%<*ja>
\verb+\jfont+ の書式を見ればわかるように,基本的には\LuaTeX-jaにおける1つの和文フォントに
使用出来る「実際のフォント」は1つである.
@@ -3816,7 +4190,7 @@ With the help of this example, we remark the specification of \verb+\inhibitglue
\verb+\ltjdeclarealtfont+ は以下の書式で使用する:
\begin{quote}
-\ttfamily \char`\\ltjdeclarealtfont<base\_font\_cs><alt\_font\_cs>{<range>}
+\ttfamily \textbackslash ltjdeclarealtfont<base\_font\_cs><alt\_font\_cs>{<range>}
\end{quote}
これは「現在の和文フォント」が<base\_font\_cs>であるとき,
<range>に属する文字は<alt\_font\_cs>を用いて組版される,という意味である.
@@ -3837,7 +4211,7 @@ With the help of this example, we remark the specification of \verb+\inhibitglue
\ltjdeclarealtfont\hoge\piyo{"3000-"30FF, {-1}-{-1}}
\end{verbatim}
は「\verb+\hoge+ を利用しているとき,
-\texttt{U+3000}-\texttt{U+30FF}と
+\texttt{U+3000}--\texttt{U+30FF}と
文字クラス1(開き括弧類)中の文字だけは \verb+\piyo+ を用いる」
ことを設定する.\verb+{-1}-{-1}+ という変わった指定の仕方をしているのは,
普通に \texttt{-1} と指定したのでは正しく$-1$と読み取られないという
@@ -3846,7 +4220,7 @@ With the help of this example, we remark the specification of \verb+\inhibitglue
-%<en>\section{Control Sequences for \LaTeXe}
+%<en>\section{Commands for \LaTeXe}
%<ja>\section{\LaTeXe 用の命令}
%<en>\subsection{Patch for NFSS2}
@@ -3875,25 +4249,66 @@ With the help of this example, we remark the specification of \verb+\inhibitglue
{\kanjifamily{edm}\selectfont
日本国民は、正当に選挙された国会における代表者を通じて行動し、……}
\end{quote}
-%<ja>\caption{\texttt{\char92DeclareAlternateKanjiFont} の使用例}
-%<en>\caption{An example of \texttt{\char92DeclareAlternateKanjiFont}}
+%<ja>\caption{\texttt{\textbackslash DeclareAlternateKanjiFont} の使用例}
+%<en>\caption{An example of \texttt{\textbackslash DeclareAlternateKanjiFont}}
\label{fig:altkanji}
\end{figure}
%<*en>
-As described in Subsection~\ref{ssec-ltx}, Japanese patch for NFSS2 in \LuaTeX-ja
+Japanese patch for NFSS2 in \LuaTeX-ja
is based on \texttt{plfonts.dtx} which plays the same role in \pLaTeXe.
-For an convenience, we will describe
-control sequences which are not described in Subsection~\ref{ssub-chgfnt}.
+We will describe
+commands which are not described in Subsection~\ref{ssub-chgfnt}.
%</en>
%<*ja>
-\ref{ssec-ltx}節で述べたように,\LuaTeX-jaのNFSS2への日本語パッチは
-\pLaTeXe で同様の役割を果たす \texttt{plfonts.dtx} をほぼそのまま利用している.
-便宜のため,ここでは\ref{ssub-chgfnt}節で述べていなかった命令について
+\LuaTeX-jaのNFSS2への日本語パッチは
+\pLaTeXe で同様の役割を果たす \texttt{plfonts.dtx} をベースに,
+和文エンコーディングの管理等をLuaで書きなおしたものである.
+ここでは\ref{ssub-chgfnt}節で述べていなかった命令について
記述しておく.
%</ja>
\begin{cslist}%
+\par\smallskip\par\hskip-\leftskip{\bfseries%
+%<ja>追加の長さ変数達
+%<en>additonal dimensions
+}\par
+
+%<*en>
+Like \pLaTeXe, \LuaTeX-ja defines the following dimensions
+for information of current Japanese font:
+%</en>
+%<*ja>
+\pLaTeXe と同様に,\LuaTeX-jaは「現在の和文フォントの情報」を格納する長さ変数
+%</ja>
+{\let\item=\origitem
+\begin{quote}
+ \verb+\cht+~(height), \verb+\cdp+~(depth), \verb+\cHT+~(sum of former two),\\
+ \verb+\cwd+~(width), \verb+\cvs+~(lineskip), \verb+\chs+~(equals to \verb+\cwd+)
+\end{quote}}
+%<en>and its \verb+\normalsize+ version:
+%<ja>と,その \verb+\normalsize+ 版である
+{\let\item=\origitem
+\begin{quote}
+ \verb+\Cht+~(height), \verb+\Cdp+~(depth),
+ \verb+\Cwd+~(width), \\\verb+\Cvs+~(equals to \verb+\baselineskip+),
+ \verb+\Chs+~(equals to \verb+\cwd+)%
+%<en>.
+\end{quote}}
+%<*ja>
+を定義している.なお,\verb+\cwd+ と \verb+\zw+,また
+\verb+\cHT+ と \verb+\zh+ は一致しない可能性がある.なぜなら,
+\verb+\cwd+,~\verb+\cHT+ は「あ」の寸法から決定されるのに対し,
+\verb+\zw+ と \verb+\zh+ はJFMに指定された値に過ぎないからである.
+%</ja>
+%<*en>
+Note that \verb+\cwd+~and~\verb+\cHT+ may differ from \verb+\zw+~and~\verb+\zh+
+respectively.
+On the one hand the former dimensions are determined from the character ``あ'',
+but on the other hand \verb+\zw+~and~\verb+\zh+ are specified by JFM.
+%</en>
+
+
\item[DeclareYokoKanjiEncoding\{<encoding>\}\{<text-settings>\}\{<math-settings>\}]
%<*en>
@@ -3918,10 +4333,10 @@ In NFSS2 under \LuaTeX-ja, distinction between alphabetic font families
\item[DeclareErrorKanjiFont\{<encoding>\}\{<family>\}\{<series>\}\{<shape>\}\{<size>\}]
%<*en>
-The above 3~commands are just the counterparts for \verb+DeclareFontEncodingDefaults+ and~others.
+The above 3~commands are just the counterparts for \verb+\DeclareFontEncodingDefaults+ and~others.
%</en>
%<*ja>
-上記3つのコマンドはちょうど \verb+DeclareFontEncodingDefaults+ などに対応するものである.
+上記3つのコマンドはちょうど \verb+\DeclareFontEncodingDefaults+ などに対応するものである.
%</ja>
\item[reDeclareMathAlphabet\{<unified-cmd>\}\{<al-cmd>\}\{<ja-cmd>\}]
@@ -3943,16 +4358,18 @@ The above 3~commands are just the counterparts for \verb+DeclareFontEncodingDefa
\end{center}
と定義を行うので,使用には注意が必要である:
\vspace{-\medskipamount}
+%<en>\advance\linewidth-2em
+%<ja>\advance\linewidth-2\zw
\begin{itemize}
\item <al-cmd>,~<ja-cmd>は既に定義されていなければならない.
\verb+\reDeclareMathAlphabet+\\の後に
両命令の内容を再定義しても,<unified-cmd>の内容にそれは反映されない.
-\item <al-cmd>,~<ja-cmd>に\verb+\@mathrm+などと\texttt{@}をつけた命令を指定した時の動作は保証できない.
+\item <al-cmd>,~<ja-cmd>に\verb+\@mathrm+などと \texttt{@} をつけた命令を指定した時の動作は保証できない.
\end{itemize}}
%</ja>
-\item[DeclareRelationFont\{<ja-encoding>\}\{<ja-family>\}\{<ja-series>\}\{<ja-shape>\}\\
- \hfill\{<al-encoding>\}\{<al-family>\}\{<al-series>\}\{<al-shape>\}]
+\item[DeclareRelationFont\{<ja-encoding>\}\{<ja-family>\}\{<ja-series>\}\{<ja-shape>\}\\*
+ \null\hfill\{<al-encoding>\}\{<al-family>\}\{<al-series>\}\{<al-shape>\}]
%<*en>
This command sets the ``accompanied'' alphabetic font family (given by the latter 4~arguments)
with respect to a Japanese font family given by the former 4~arguments.
@@ -3980,14 +4397,39 @@ Change current alphabetic font encoding/family/\dots\ to the `accompanied' alpha
Like \verb+\fontfamily+, \verb+\selectfont+ is required to take an effect.
%</en>
%<*ja>
-現在の欧文フォントエンコーディング/ファミリ/…… を,
+現在の欧文フォントのエンコーディング/ファミリ/…… を,
\verb+\DeclareRelationFont+ か \verb+\SetRelationFont+ で指定された
現在の和文フォントファミリに対応する「従属欧文」フォントファミリに変更する.
\verb+\fontfamily+ のように,有効にするためには \verb+\selectfont+ が必要である.
%</ja>
\item[adjustbaseline]
-\ldots
+%<*en>
+In \pLaTeXe, \verb+\adjustbaseline+ sets \verb+\tbaselineshift+
+to match the vertical center of ``M'' and that of ``あ'' in vertical typesetting:
+\[
+\text{\ttfamily \textbackslash tbaselineshift} \leftarrow
+\frac{(h_{\text{M}}+d_{\text{M}}) - (h_{\text{あ}}+d_{\text{あ}})}2
+ + d_{\text{あ}} - d_{\text{M}},
+\]
+where $h_{a}$~and~$d_{a}$ denote the height of ``$a$'' and the depth, respectively.
+
+Current \LuaTeX-ja does not support vertical typesetting, so
+this \verb+\adjustbaseline+ has almost no effect.
+%</en>
+%<*ja>
+\pLaTeXe では,\verb+\adjustbaseline+ は縦書時に「M」と「あ」の中心線を一致させるために,
+\verb+\tbaselineshift+ を設定する役割を持っていた:
+\[
+\text{\ttfamily \textbackslash tbaselineshift} \leftarrow
+\frac{(h_{\text{M}}+d_{\text{M}}) - (h_{\text{あ}}+d_{\text{あ}})}2
+ + d_{\text{あ}} - d_{\text{M}},
+\]
+ここで,$h_{a}$,~$d_{a}$はそれぞれ「$a$」の高さ・深さを表す.
+
+現在の\LuaTeX-jaは縦書きをサポートしていないので,この \verb+\adjustbaseline+ は
+ほとんど何もしていない.
+%</ja>
\item[fontfamily\{<family>\}]
%<*en>
@@ -4000,6 +4442,8 @@ to <family>. Which family will be changed is determined as follows:
どのファミリが変更されるかは以下のようにして決定される:
%</ja>
{\let\item\origitem
+%<en>\advance\linewidth-2em
+%<ja>\advance\linewidth-2\zw
\vspace{-\medskipamount}
\begin{itemize}
%<*en>
@@ -4056,13 +4500,15 @@ In this case, the default family for font substitution is used for
}
\item[DeclareAlternateKanjiFont\{<base-encoding>\}\{<base-family>\}\{<base-series>\}\{<base-shape>\}\\
- \hfill\{<alt-encoding>\}\{<alt-family>\}\{<alt-series>\}\{<alt-shape>\}\{<range>\}]
+ \null\hfill\{<alt-encoding>\}\{<alt-family>\}\{<alt-series>\}\{<alt-shape>\}\{<range>\}]
%<*ja>
\ref{ssec-altfont}節の
\verb+\ltjdeclarealtfont+ と同様に,前半の4引数の和文フォント(基底フォント)のうち<range>中の文字を
第5--第8引数の和文フォントを使って組むように指示する.使用例を図\ref{fig:altkanji}に載せた.
{\let\item\origitem
+%<en>\advance\linewidth-2em
+%<ja>\advance\linewidth-2\zw
\vspace{-\medskipamount}
\begin{itemize}
\item
@@ -4072,18 +4518,34 @@ In this case, the default family for font substitution is used for
実際に効力が発揮するのは,書体変更やサイズ変更を行った時,
あるいは(これらを含むが)\verb+\selectfont+ が実行された時である.
\item
-段落や水平ボックスの最後での設定値が段落/水平ボックス全体にわたって通用する点や,
+段落やhboxの最後での設定値が段落/hbox全体にわたって通用する点や,
<range>に負数$-n$を指定した場合,それが「基底フォントの文字クラス$n$に属する文字全体」
と解釈されるのは \verb+\ltjdeclarealtfont+ と同じである.
\end{itemize}%
-%<en>\vspace{-\medskipamount}
}
%</ja>
%<*en>
-As \verb+\ltjdeclarealtfont+, characters in <range> of the Japanese font (we say the \emph{base font})
+As \verb+\ltjdeclarealtfont+~(Subsection~\ref{ssec-altfont}),
+characters in <range> of the Japanese font (we say the \emph{base font})
which specified by first 4 arguments are typeset
-by the Japanese font which specified by fifth to eighth arguments.
+by the Japanese font which specified by fifth to eighth arguments
+(we say the \emph{alternate font}).
An example is shown in Figure~\ref{fig:altkanji}.
+
+{\let\item\origitem
+%<en>\advance\linewidth-2em
+%<ja>\advance\linewidth-2\zw
+\vspace{-\medskipamount}
+\begin{itemize}
+ \item
+In \verb+\ltjdeclarealtfont+, the base font and the alternate font must be already defined.
+But this \verb+\DeclareAlternateKanjiFont+ is not so.
+In other words, \verb+\DeclareAlternateKanjiFont+ is effective only after
+current Japanese font is changed, or only after \verb+\selectfont+ is executed.
+ \item \dots
+\end{itemize}%
+\vspace{-\medskipamount}
+}
%</en>
\end{cslist}
@@ -4103,10 +4565,21 @@ Avant Garde (OT1/pag/m/n) に変わっていることがわかる.
\userelfont\selectfont あいうabc
\end{LTXexample}
-%<en>\section{Extensions}
-%<ja>\section{拡張}
+%<*en>
+\section{Addons}
+\LuaTeX-ja has several addon packages.
+These addons are written as \LaTeX\ packages, but
+\Pkg{luatexja-otf} and~\Pkg{luatexja-adjust} can be loaded in plain \LuaTeX\
+by \verb+\input+.
+%</en>
+%<*ja>
+\section{拡張}
+\LuaTeX-jaには(動作には必須ではないが)自由に読み込める拡張が付属している.
+これらは\LaTeX のパッケージとして制作しているが,
+\Pkg{luatexja-otf}と\Pkg{luatexja-adjust}についてはplain \LuaTeX でも\
+\verb+\input+ で読み込み可能である.
+%</ja>
\subsection{\texttt{luatexja-fontspec.sty}}
-
%<*en>
As described in Subsection~\ref{ssec-fontspec}, this optional package
provides the counterparts for several commands defined in the
@@ -4129,7 +4602,7 @@ the commands of Japanese version:
\item[JFM-var=<name>] \
%<*en>
-These 3 font features correspond to \texttt{cid}, \texttt{jfm} and
+These 3 keys correspond to \texttt{cid}, \texttt{jfm} and
\texttt{jfmvar} keys for \verb+\jfont+ respectively.
\texttt{CID} is effective only when with \texttt{NoEmbed}
described below.
@@ -4146,7 +4619,7 @@ See Subsections~\ref{ssec-jfont} and \ref{ssec-psft} for details.
\item[NoEmbed]
%<*en>
-By specifying this font feature, one can use ``name-only'' Japanese font which
+By specifying this key, one can use ``name-only'' Japanese font which
will not be embedded in the output PDF file. See Subsection~\ref{ssec-psft}.
%</en>
%<*ja>
@@ -4166,15 +4639,18 @@ will not be embedded in the output PDF file. See Subsection~\ref{ssec-psft}.
\label{ssec-ltjotf}
%<*en>
This optional package supports typesetting characters in
-Adobe-Japan1. the package \Pkg{luatexja-otf} offers the following 2~low-level
+Adobe-Japan1 character collection
+(or other CID character collecton, if the font is supported).
+The package \Pkg{luatexja-otf} offers the following 2~low-level
commands:
%</en>
%<*ja>
-この追加パッケージはAdobe-Japan1の文字の出力をサポートする.
+この追加パッケージはAdobe-Japan1(フォント自身が持っていれば,
+別のCID文字セットでも可)の文字の出力をサポートする.
\Pkg{luatexja-otf}は以下の2つの低レベルコマンドを提供する:
%</ja>
\begin{list}{}{\def\makelabel{\ttfamily}\def\{{\char`\{}\def\}{\char`\}}\advance\leftmargin1\zw}
-\item[\char92CID\{<number>\}]
+\item[\textbackslash CID\{<number>\}]
%<*en>
Typeset a character whose CID number is <number>.
%</en>
@@ -4182,7 +4658,7 @@ Typeset a character whose CID number is <number>.
CID番号が<number>の文字を出力する.
%</ja>
-\item[\char92UTF\{<hex\_number>\}]
+\item[\textbackslash UTF\{<hex\_number>\}]
%<*en>
Typeset a character whose character code is <hex\_number> (in hexadecimal).
This command is similar to \verb+\char"+<hex\_number>,\ %"
@@ -4194,6 +4670,13 @@ but please remind remarks below.
%</ja>
\end{list}
+%<*ja>
+このパッケージは,\texttt{ajmacros.sty}(\Pkg{otf}パッケージ付属のマクロ集,井上浩一氏作)から
+漢字コードをUTF8にしたり,plain \LuaTeX でも利用可能するという
+修正を加えた \texttt{luatexja-ajmacros.sty} も自動的に読み込む.
+そのため,マクロ集にある \verb+\aj半角+ などのマクロもそのまま使用可能である.
+%</ja>
+
%<en>\paragraph{Remarks}
%<ja>\paragraph{注意}
%<*en>
@@ -4222,8 +4705,7 @@ ordinary characters in the following points:
%</ja>
\end{itemize}
-
-%<en>\paragraph{Additional Syntax of JFM}
+%<en>\paragraph{Additional syntax of JFM}
%<ja>\paragraph{JFMへの記法の追加}
%<*en>
@@ -4245,7 +4727,7 @@ JFMの\texttt{chars}テーブルのエントリとして \verb+'AJ1-xxx'+ の形
%</ja>
%<*en>
-\paragraph{IVS Support}
+\paragraph{IVS support}
Recent fonts support Ideographic Variation Selector (IVS).
It seems that \Pkg{luaotfload} and \Pkg{fontspec} packages do not support
IVS, so we implemented IVS support in \Pkg{luatexja-otf}.
@@ -4363,7 +4845,7 @@ for making the difference obvious.
%<*en>
-...
+(see Japanese version of this manual)
%</en>
%<*ja>
\pTeX では,行長調整において優先度の概念が存在しなかったため,図
@@ -4373,18 +4855,32 @@ for making the difference obvious.
ては,このような状況では半端は鍵括弧周辺の空白のみで負担し,その他の和文
文字はベタ組で組まれる(図\ref{fig-adj}下段)ことになっている.この追加
パッケージは\cite{jlreq}や\cite{x4051}における規定のような,優先順位付き
-の行長調整を提供する.詳細な仕様については\ref{sec-adjspec}を参照.
+の行長調整を提供する.詳細な仕様については\ref{sec-adjspec}章を参照してほしい.
+\begin{itemize}
+ \item 優先度付き行長調整は,段落を行分割した後に個々の行について行われるものである.
+そのため,行分割の位置は変化することはない.
+
+また,\verb+\hbox to ... {...}+ のような「幅が指定されたhbox」では無効である.
+ \item 優先度付き行長調整を行うと,和文処理グルーの自然長は変化しないが,伸び量や縮み量は
+一般に変化する.そのため,既に組まれた段落を \verb+\unhbox+ などを利用して組み直す処理を
+行う場合には注意が必要である.
+\end{itemize}
\Pkg{luatexja-adjust} は,以下の命令を提供する.これらはすべてグローバルに効力を発揮する.
\begin{list}{}{\def\makelabel{\ttfamily}\def\{{\char`\{}\def\}{\char`\}}\advance\leftmargin1\zw}
-\item[\char92ltjdisableadjust]
+\item[\textbackslash ltjdisableadjust]
優先順位付きの行長調整を無効化する.
-\item[\char92ltjenableadjust]
+\item[\textbackslash ltjenableadjust]
優先順位付きの行長調整を有効化する.
+\item[\textsf{adjust}\,=<bool>] \verb+\ltjsetparameter+ で指定可能な追加パラメータであり,
+<bool>が\textit{true}なら \verb+\ltjenableadjust+ を,
+そうでなければ \verb+\ltjdisableadjust+ を実行する.
+
+
\end{list}
@@ -4401,8 +4897,8 @@ for making the difference obvious.
%<en>\section{Storing Parameters}
%<ja>\section{パラメータの保持}
\label{sec-para}
-%<en>\subsection{Used Dimensions, Attributes and whatsit nodes}
-%<ja>\subsection{\LuaTeX-jaで用いられる寸法レジスタ,属性レジスタ,whatsitノード}
+%<en>\subsection{Used Dimensions, Attributes and Whatsit Nodes}
+%<ja>\subsection{\LuaTeX-jaで用いられるレジスタとwhatsitノード}
%<*en>
Here the following is the list of dimensions and attributes which are used in \LuaTeX-ja.
@@ -4413,8 +4909,8 @@ Here the following is the list of dimensions and attributes which are used in \L
%</ja>
\begin{list}{}{%
\def\makelabel{\ttfamily}\advance\leftmargin1\zw
-\def\dim#1{\item[\char`\\#1\ \textrm{(dimension)}]}
-\def\attr#1{\item[\char`\\#1\ \textrm{(attribute)}]}
+\def\dim#1{\item[\textbackslash #1\ \textrm{(dimension)}]}
+\def\attr#1{\item[\textbackslash #1\ \textrm{(attribute)}]}
}
\dim{jQ}
@@ -4444,17 +4940,25 @@ This \verb+\jH+ is the same \verb+\dimen+ register as \verb+\jQ+.
\dim{ltj@zw}
%<*en>
A temporal register for the ``full-width'' of current Japanese font.
+The command \verb+\zw+ sets this register to the correct value, and
+``return'' this register itself.
%</en>
%<*ja>
現在の和文フォントの「全角幅」を保持する一時レジスタ.
+\verb+\zw+ 命令は,このレジスタを適切な値に設定した後,
+「このレジスタ自体を返す」.
%</ja>
\dim{ltj@zh}
%<*en>
A temporal register for the ``full-height'' (usually the sum of height of imaginary body and its depth) of current Japanese font.
+The command \verb+\zh+ sets this register to the correct value, and
+``return'' this register itself.
%</en>
%<*ja>
現在の和文フォントの「全角高さ」(通常,高さと深さの和)を保持する一時レジスタ.
+\verb+\zh+ 命令は,このレジスタを適切な値に設定した後,
+「このレジスタ自体を返す」.
%</ja>
\attr{jfam}
@@ -4539,69 +5043,36 @@ Glues from an italic correction
\item[\textit{kinsoku} (3)]
%<*en>
-Penalties inserted for the word-wrapping process of Japanese characters (\emph{kinsoku}).
-%</en>
-%<*ja>
-和文文字のワードラップ過程において挿入されたペナルティ(\emph{kinsoku}).
-%</ja>
-
-\item[\textit{from\_jfm} (6)]
-%<*en>
-Glues/kerns from JFM.
-%</en>
-%<*ja>
-JFM由来のグルー/カーン.
-%</ja>
-
-%%\item[\textit{line\_end} (5)]
-%%%<*en>
-%%Kerns for \ldots
-%%%</en>
-%%%<*ja>
-%%和文文字が行末にきたとき,行末との間に挿入されるカーンである.
-%%% ぶら下げ組への応用
-%%%</ja>
-
-\item[\textit{kanji\_skip} (9)]
-%<*en>
-Glues for \Param{\hyperlink{fld:kanjiskip}{kanjiskip}}.
-%</en>
-%<*ja>
-\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}のグルー.
-%</ja>
-
-\item[\textit{xkanji\_skip} (10)]
-%<*en>
-Glues for \Param{\hyperlink{fld:xks}{xkanjiskip}}.
-%</en>
-%<*ja>
-\Param{\hyperlink{fld:xks}{xkanjiskip}}のグルー.
-%</ja>
-
-\item[\textit{processed} (11)]
-%<*en>
-Nodes which is already processed by \ldots.
-%</en>
-%<*ja>
-\LuaTeX-ja の内部処理によって既に処理されたノード.
-%</ja>
-
-\item[\textit{ic\_processed} (12)]
-%<*en>
-Glues from an italic correction, but also already processed.
-%</en>
-%<*ja>
-イタリック補正に由来するグルーであるが,まだ処理されていないもの.
-%</ja>
-
+Penalties inserted for the word-wrapping process (\emph{kinsoku shori}) of Japanese characters.
+%</en>
+%<ja>禁則処理のために挿入されたペナルティ.
+\item[\mathversion{bold}$(\textit{from\_jfm}-2)$--$(\textit{from\_jfm}+2)$~(4--8)]
+%<en>Glues/kerns from JFM.
+%<ja>JFM由来のグルー/カーン.
+\item[\textit{kanji\_skip}~(9), \textit{kanji\_skip\_jfm}~(10)]
+%<en>Glues from \Param{\hyperlink{fld:kanjiskip}{kanjiskip}}.
+%<ja>和文間空白\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}を表すグルー.
+\item[\textit{xkanji\_skip}~(11), \textit{xkanji\_skip\_jfm}~(12)]
+%<en>Glues from \Param{\hyperlink{fld:xks}{xkanjiskip}}.
+%<ja>和欧文間空白\Param{\hyperlink{fld:xks}{xkanjiskip}}を表すグルー.
+\item[\textit{processed} (13)]
+%<en>Nodes which is already processed by \ldots.
+%<ja>\LuaTeX-ja の内部処理によって既に処理されたノード.
+\item[\textit{ic\_processed} (14)]
+%<*en>
+Glues from an italic correction, but already processed in the insertion process of \textbf{JAglue}s.
+%</en>
+%<ja>イタリック補正に由来するグルーであって,既に \textbf{JAglue} 挿入処理にかかったもの.
\item[\textit{boxbdd} (15)]
-%<*en>
-Glues/kerns that inserted just the beginning or the ending of an hbox or a paragraph.
-%</en>
+%<en>Glues/kerns that inserted just the beginning or the ending of an hbox or a paragraph.
+%<ja>hboxか段落の最初か最後に挿入されたグルー/カーン.
+\end{description}
+
%<*ja>
-ある水平ボックスか段落の最初か最後に挿入されたグルー/カーン.
+また,挿入処理の結果であるリストの最初のノードでは,\verb+\ltj@icflag+ の値に
+\textit{processed\_begin\_flag}~(128)が追加される.これによって,\verb+\unhbox+ が
+連続した場合でも「ボックスの境界」が識別できるようになっている.
%</ja>
-\end{description}
\attr{ltj@kcat$i$}
%<*en>
@@ -4626,7 +5097,8 @@ are allocated by \texttt{luatexbase.newuserwhatsitid}.
さらに,\LuaTeX-jaはいくつかのuser-defined whatsit nodeを内部処理に用いる.
これらのwhatsitノードの \texttt{type} は100であり,ノードは自然数を格納している.
user-defined whatsitを識別するための \texttt{user\_id} は\
-\texttt{luatexbase.newuserwhatsitid} により確保されている.
+\texttt{luatexbase.newuserwhatsitid} により確保されており,
+下の見出しは単なる識別用でしかない.
%</ja>
\begin{description}
\item[\textit{inhibitglue}]
@@ -4652,7 +5124,7 @@ Nodes for \LuaTeX-ja's stack system (see the next
\item[\textit{char\_by\_cid}]
%<*en>
-Nodes for Japanese Characters which the callback process of
+Nodes for \textbf{JAchar} which the callback process of
\Pkg{luaotfload} won't be applied, and the character code is
stored in the \texttt{value} field. Each node of this type are
converted to a \textit{glyph\_node} \emph{after}
@@ -4660,13 +5132,25 @@ Nodes for Japanese Characters which the callback process of
Nodes of this type is used in \verb+\CID+, \verb+\UTF+ and IVS support.
%</en>
%<*ja>
-\Pkg{luaotfload}のコールバックによる処理が適用されない和文文字のためのノードで,
+\Pkg{luaotfload}のコールバックによる処理が適用されない\textbf{JAchar}のためのノードで,
\texttt{value} フィールドに文字コードが格納されている.
この種類のノードはそれぞれが\Pkg{luaotfload}のコールバックの処理の
\emph{後で}\textit{glyph\_node}に変換される.
\verb+\CID+, \verb+\UTF+やIVS対応処理でこの種類のノードが利用されている.
%</ja>
+\item[\textit{replace\_vs}]
+%<*en>
+Similar to \textit{char\_by\_cid} whatsits above.
+These nodes are for \textbf{ALchar} which the callback process of
+ \Pkg{luaotfload} won't be applied.
+%</en>
+%<*ja>
+上の\textit{char\_by\_cid}と同様に,
+これらのノードは\Pkg{luaotfload}のコールバックによる処理が適用されない\textbf{ALchar}のた
+ めものである.
+%</ja>
+
\item[\textit{begin\_par}]
%<*en>
Nodes for indicating beginning of a paragraph.
@@ -4706,7 +5190,8 @@ source:
%</ja>
\begin{LTXexample}
\ltjsetparameter{kanjiskip=0pt}ふがふが.%
-\setbox0=\hbox{\ltjsetparameter{kanjiskip=5pt}ほげほげ}
+\setbox0=\hbox{%
+ \ltjsetparameter{kanjiskip=5pt}ほげほげ}
\box0.ぴよぴよ\par
\end{LTXexample}
@@ -4715,18 +5200,18 @@ As described in Subsection~\ref{ssec-param}, the only effective value of
\Param{\hyperlink{fld:kanjiskip}{kanjiskip}} in an hbox is the latest value, so the value of
\Param{\hyperlink{fld:kanjiskip}{kanjiskip}} which applied in the entire hbox should be 5\,pt.
However, by the implementation method of \LuaTeX, this ``5\,pt'' cannot be
-known from any callbacks. In the \texttt{tex/packaging.w} (which is a
-file in the source of \LuaTeX), there are the following codes:
+known from any callbacks. In the \texttt{tex/packaging.w}, which is a
+file in the source of \LuaTeX, there are the following codes:
%</en>
%<*ja>
-\ref{ssec-param}節で述べたように,ある水平ボックスの中で効力を持つ
+\ref{ssec-param}節で述べたように,あるhboxの中で効力を持つ
\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}の値は最後に現れた値のみであり,したがってボックス全体に適用される
-\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}は5\,ptであるべきである.しかし,\LuaTeX の実装のために,
-この5\,ptという長さはどのコールバックからも知ることはできない.
-\texttt{tex/packaging.w}(これは\LuaTeX のソースファイルである)の中に,
+\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}は5\,ptであるべきである.しかし,\LuaTeX の実
+装を観察すると,この5\,ptという長さはどのコールバックからも知ることはできないことがわかる.
+\LuaTeX のソースファイルの1つ \texttt{tex/packaging.w} の中に,
以下のコードがある:
%</ja>
-\begin{lstlisting}
+\begin{lstlisting}[numbers=left,firstnumber=1226]
void package(int c)
{
scaled h; /* height of box */
@@ -4744,20 +5229,20 @@ void package(int c)
subtype(cur_box) = HLIST_SUBTYPE_HBOX;
\end{lstlisting}
%<*en>
-Notice that \verb+unsave+ is executed \emph{before}
-\verb+filtered_hpack+ (this is where \verb+hpack_filter+ callback is
-executed): so ``5\,pt'' in the above source is orphaned at
-\verb+unsave+, and hence it can't be accessed from \verb+hpack_filter+
+Notice that \texttt{unsave()} is executed \emph{before}
+\texttt{filtered\_hpack()}, where \texttt{hpack\_filter} callback is
+executed) here. So ``5\,pt'' in the above source is orphaned at
+\texttt{unsave()}, and hence it can't be accessed from \texttt{hpack\_filter}
callback.
%</en>
%<*ja>
-\verb+unsave+ が \verb+filtered_hpack+(これは \verb+hpack_filter+ コールバックが
+\texttt{unsave()} が \texttt{filtered\_hpack()}(これは \texttt{hpack\_filter} コールバックが
実行されるところである)の\emph{前に}実行されていることに注意する.
-したがって,上記ソース中で5\,ptは \verb+unsave+ のところで捨てられ,
-\verb+hpack_filter+ からはアクセスすることができない.
+したがって,上記ソース中で5\,ptは \texttt{unsave()} のところで捨てられ,
+\texttt{hpack\_filter} コールバックからはアクセスすることができない.
%</ja>
-%<en>\paragraph{The method}
+%<en>\paragraph{Implementation}
%<ja>\paragraph{解決法}
%<*en>
@@ -4765,7 +5250,8 @@ The code of stack system is based on that in a post of Dev-luatex mailing list\f
\texttt{[Dev-luatex] tex.currentgrouplevel}, a post at 2008/8/19 by Jonathan Sauer.}.
%</en>
%<*ja>
-スタックシステムのコードはDev-luatexメーリングリストのある投稿\footnote{\texttt{[Dev-luatex] tex.currentgrouplevel}: Jonathan Sauerによる2008/8/19の投稿.}を
+スタックシステムのコードはDev-luatexメーリングリストのある投稿\footnote{%
+\texttt{[Dev-luatex] tex.currentgrouplevel}: Jonathan Sauerによる2008/8/19の投稿.}を
ベースにしている.
%</ja>
@@ -4780,7 +5266,7 @@ previous level is copied.
%</en>
%<*ja>
情報を保持するために,2つの\TeX の整数レジスタを用いている:
-\verb+\ltj@@stack+ でスタックレベル,\verb+\ltj@@group@level+ で最後の代入が
+\verb+\ltj@@stack+ にスタックレベル,\verb+\ltj@@group@level+ に最後の代入が
なされた時点での\TeX のグループレベルを保持している.
パラメータは\texttt{charprop\_stack\_table}という名前のひとつの大きなテーブルに
格納される.ここで,\texttt{charprop\_stack\_table[$i$]}はスタックレベル$i$の
@@ -4790,34 +5276,34 @@ previous level is copied.
%<*en>
To resolve the problem mentioned in above paragraph ``Background'', \LuaTeX-ja uses
-another thing: When a new stack level is about to be created, a whatsit
+another trick. When the stack level is about to be increased, a whatsit
node whose type, subtype and value are 44~(\textit{user\_defined}),
-\textit{stack\_marker} and current group level respectively is appended to the current
+\textit{stack\_marker} and the current group level respectively is appended to the current
list (we refer this node by \textit{stack\_flag}). This enables us to
know whether assignment is done just inside a hbox. Suppose that the
stack level is~$s$ and the \TeX's group level is~$t$ just after the hbox
group, then:
%</en>
%<*ja>
-上の「背景」で述べた問題を解決するために,\LuaTeX-jaではもう一つの手法を導入する:
-新しいスタックレベルが生成されようとするとき,type, subtype, valueがそれぞれ
+上の「背景」で述べた問題を解決するために,\LuaTeX-jaでは次の手法を用いる:
+スタックレベルが増加するするとき,type, subtype, valueがそれぞれ
44~(\textit{user\_defined}), \textit{stack\_marker},そして現在のグループレベルであるwhatsitノード
を現在のリストに付け加える(このノードを\textit{stack\_flag}とする).
-これにより,ある水平ボックスの中で代入がなされたかどうかを知ることが可能
-となる.スタックレベルを$s$,その水平ボックスグループの直後の\TeX のグループレベルを
+これにより,あるhboxの中で代入がなされたかどうかを知ることが可能
+となる.スタックレベルを$s$,そのhbox groupの直後の\TeX のグループレベルを
$t$とすると:
%</ja>
\begin{itemize}
%<*en>
-\item If there is no \textit{stack\_flag} node in the list of the hbox, then
+\item If there is no \textit{stack\_flag} node in the list of the contents of the hbox, then
no assignment was occurred inside the hbox. Hence values of
parameters at the end of the hbox are stored in the stack
level~$s$.
%</en>
%<*ja>
-\item もしその水平ボックスのリストの中に\textit{stack\_flag}ノードがなければ,
- 水平ボックスの中では代入は起こらなかったということになる.
- したがって,その水平ボックスの終わりにおけるパラメータの値はスタックレベル$s$に
+\item もしそのhboxの中身を表すリストの中に\textit{stack\_flag}ノードがなければ,
+ hboxの中では代入は起こらなかったということになる.
+ したがって,そのhboxの終わりにおけるパラメータの値はスタックレベル$s$に
格納されている.
%</ja>
@@ -4829,8 +5315,8 @@ $t$とすると:
%</en>
%<*ja>
\item もし値が$t+1$の\textit{stack\_flag}ノードがあれば,その
- 水平ボックスグループの中で代入が起こったことになる.
- したがって,水平ボックスの終わりにおけるパラメータの値はスタックレベル$s+1$に
+ hboxの中で代入が起こったことになる.
+ したがって,hboxの終わりにおけるパラメータの値はスタックレベル$s+1$に
格納されている.
%</ja>
@@ -4844,7 +5330,7 @@ $t$とすると:
%<*ja>
\item もし\textit{stack\_flag}ノードがあるがそれらの値が全て$t+1$より大きい
場合,そのボックスの中で代入が起こったが,それは「より内部の」グループで
- 起こったということになる.したがって,水平ボックスの終わりでのパラメータの
+ 起こったということになる.したがって,hboxの終わりでのパラメータの
値はスタックレベル$s$に格納されている.
%</ja>
\end{itemize}
@@ -4853,8 +5339,8 @@ $t$とすると:
Note that to work this trick correctly, assignments to
\verb+\ltj@@stack+ and \verb+\ltj@@group@level+ have to be local always,
regardless the value of \verb+\globaldefs+.
-This problem is resolved by using
-\hbox{\verb+\directlua{tex.globaldefs=0}+} (this assignment is local).
+To solve this problem, we use another trick: the assignment
+\hbox{\verb+\directlua{tex.globaldefs=0}+} is always local.
%</en>
%<*ja>
このトリックを正しく働かせるためには,\verb+\ltj@@stack+ と \verb+\ltj@@group@level+ への
@@ -4863,7 +5349,177 @@ This problem is resolved by using
用いることで解決している.
%</ja>
-%<en>\section{Linebreak after Japanese Character}
+%<*en>
+\subsection{Lua Functions of the Stack System}
+In this subsection, we will see how a user use \LuaTeX-ja's stack system to
+store some data which obeys the grouping of \TeX.
+%</en>
+%<*ja>
+\subsection{スタックシステムで使用される関数}
+本節では,ユーザが\LuaTeX-jaのスタックシステムを使用して,
+\TeX のグルーピングに従うような
+独自のデータを取り扱う方法を述べる.
+%</ja>
+
+%<*en>
+The following function can be used to store data into a stack:
+\begin{verbatim}
+luatexja.stack.set_stack_table(index, <any> data)
+\end{verbatim}
+Any values which except \texttt{nil}~and~NaN are usable as \textit{index}.
+However, a user should use only negative integers or strings as \textit{index},
+since natural numbers are used by \LuaTeX-ja itself.
+Also, whether \textit{data} is stored locally or globally
+is determined by \texttt{luatexja.isglobal}
+(stored globally if and only if \texttt{luatexja.isglobal == 'global'}).
+%</en>
+%<*ja>
+スタックに値を設定するには,以下のLua関数を呼びだせば良い:
+\begin{verbatim}
+luatexja.stack.set_stack_table(<any> index, <any> data)
+\end{verbatim}
+直感的には,スタックテーブル中のインデックス\textit{index}の値を\textit{data}にする,という意味である.
+\textit{index}の値としては \texttt{nil} とNaN以外の任意の値を使えるが,
+自然数は\LuaTeX-jaが使用する(将来の拡張用も含む)ので,
+ユーザが使用する場合は負の整数値か文字列の値にすることが望ましい.
+また,ローカルに設定されるかグローバルに設定されるかは,\texttt{luatexja.isglobal} の値に依存する
+(グローバルに設定されるのは,\texttt{luatexja.isglobal == 'global'} であるちょうどその時).
+%</ja>
+
+%<*en>
+Stored data can be obtained as the return value of
+\begin{verbatim}
+luatexja.stack.get_stack_table(index, <any> default, <number> level)
+\end{verbatim}
+where \textit{level} is the stack level, which is usually the value of \verb+\ltj@@stack+,
+and \textit{default} is the default value which will be returned if no values are stored
+in the stack table whose level is \textit{level}.
+%</en>
+%<*ja>
+スタックの値は,
+\begin{verbatim}
+luatexja.stack.get_stack_table(<any> index, <any> default, <number> level)
+\end{verbatim}
+の戻り値で取得できる.\textit{level}はスタックレベルであり,
+通常は \verb+\ltj@@stack+ の値を指定することになるだろう.
+\textit{default}はレベル\textit{level}のスタックに値が設定されていなかった場合に
+返すデフォルト値である.
+%</ja>
+
+\begin{figure}[tb]
+\begin{lstlisting}[numbers=left, firstnumber=380]
+\protected\def\ltj@setpar@global{%
+ \relax\ifnum\globaldefs>0\directlua{luatexja.isglobal='global'}%
+ \else\directlua{luatexja.isglobal=''}\fi
+}
+\protected\def\ltjsetparameter#1{%
+ \ltj@setpar@global\setkeys[ltj]{japaram}{#1}\ignorespaces}
+\protected\def\ltjglobalsetparameter#1{%
+ \relax\ifnum\globaldefs<0\directlua{luatexja.isglobal=''}%
+ \else\directlua{luatexja.isglobal='global'}\fi%
+ \setkeys[ltj]{japaram}{#1}\ignorespaces}
+\end{lstlisting}
+%<ja>\caption{パラメータ設定命令の定義}
+%<en>\caption{Definiton of parameter setting commands}
+\label{fig:setpar-def}
+\end{figure}
+
+%<*en>
+\subsection{Extending Parameters}
+Keys for \verb+\ltjsetparameter+~and~\verb+\ltjgetparameter+ can be extended,
+as in \Pkg{luatexja-adjust}.
+%</en>
+%<*ja>
+\subsection{パラメータの拡張}
+ここでは,\Pkg{luatexja-adjust}で行なっているように,
+\verb+\ltjsetparameter+,~\verb+\ltjgetparameter+に指定可能なキーを追加する方法
+を述べる.
+%</ja>
+
+%<*en>
+\paragraph{Setting parameters}
+Figure~\ref{fig:setpar-def} shows the ``most outer'' definition of
+two commands,
+\verb+\ltjsetparameter+ and \verb+\ltjglobalsetparameter+.
+Most important part is the last \verb+\setkeys+,
+which is offered by the \Pkg{xkeyval} package.
+
+Hence, to add a key in \verb+\ltjsetparameter+, one only have to add a key
+whose prefix is \texttt{ltj} and whose family is \texttt{japaram}, as the following.
+\begin{verbatim}
+\define@key[ltj]{japaram}{...}{...}
+\end{verbatim}
+
+\verb+\ltjsetparameter+~and~\verb+\ltjglobalsetparameter+ automatically sets
+\texttt{luatexja.isglobal}. Its meaning is the following.
+\begin{align}
+ \texttt{luatexja.isglobal} =
+\begin{cases}
+ \texttt{'global'}&\text{global}\\
+ \texttt{''}&\text{local}
+\end{cases}
+\end{align}
+This is determined not only by command name
+(\verb+\ltjsetparameter+~or~\verb+\ltjglobalsetparameter+),
+but also by the value of \verb+\globaldefs+.
+%</en>
+%<*ja>
+\paragraph{パラメータの設定}
+\verb+\ltjsetparameter+ と,\verb+\ltjglobalsetparameter+ の定義は図\ref{fig:setpar-def}の
+のようになっている.
+本質的なのは最後の \verb+\setkeys+ で,これは\Pkg{xkeyval}パッケージの提供する命令である.
+
+このため,\verb+\ltjsetparameter+ に指定可能なパラメータを追加するには,
+<prefix>を \texttt{ltj},<family>を \texttt{japaram} としたキーを
+\begin{verbatim}
+\define@key[ltj]{japaram}{...}{...}
+\end{verbatim}
+のように定義すれば良いだけである.
+なお,パラメータ指定がグローバルかローカルかどうかを示す \texttt{luatexja.isglobal} が,
+\begin{align}
+ \texttt{luatexja.isglobal} =
+\begin{cases}
+ \texttt{'global'}&\text{パラメータ設定はグローバル}\\
+ \texttt{''}&\text{パラメータ設定はローカル}
+\end{cases}
+\end{align}
+として自動的にセットされる\footnote{命令が \texttt{\textbackslash ltjglobalsetparameter} かどうかだけでは
+なく,実行時の \texttt{\textbackslash globaldefs} の値にも依存して定まる.}.
+%</ja>
+
+%<*ja>
+\paragraph{パラメータの取得}
+一方,\verb+\ltjgetparameter+ はLuaスクリプトによって実装されている.
+値を取得するのに追加引数の要らないパラメータについては,\verb+luatexja.unary_pars+\
+内に処理内容を記述した関数を定義すれば良い.例えば,Luaスクリプトで
+\begin{lstlisting}[numbers=left]
+function luatexja.unary_pars.hoge (t)
+ return 42
+end
+\end{lstlisting}
+を実行すると,\verb+\ltjgetparameter{hoge}+ は \texttt{42} という\emph{文字列}を返す.
+関数 \verb+luatexja.unary_pars.hoge+ の引数$t$は,\ref{ssec-stack}節で述べた
+\LuaTeX-jaのスタックシステムにおけるスタックレベルである.
+戻り値はいかなる値であっても,最終的には文字列として出力されることに注意.
+
+一方,追加引数(\emph{数値しか許容しない})が必要なパラメータについては,
+まずLuaスクリプトで処理内容の本体を記述しておく:
+\begin{lstlisting}[numbers=left]
+function luatexja.binary_pars.fuga (c, t)
+ return tostring(c) .. ', ' .. tostring(42)
+end
+\end{lstlisting}
+引数$t$は,先に述べた通りのスタックレベルである.一方,引数$c$は\
+\verb+\ltjgetparameter+ の第2引数を表す数値である.
+しかしこれだけでは駄目で,
+\begin{verbatim}
+\ltj@@decl@array@param{fuga}
+\end{verbatim}
+を実行し,\TeX インターフェース側に
+「\verb+\ltjgetparameter{fuga}+ は追加引数が必要」ということを通知する必要がある.
+%</ja>
+
+%<en>\section{Linebreak after a Japanese Character}
%<ja>\section{和文文字直後の改行}
\label{sec-lbreak}
%<en>\subsection{Reference: Behavior in \pTeX}
@@ -4949,7 +5605,7 @@ after ``beginning/ending of a group'' characters.
(midline) edge node {5\ [\sp]} (endm)
(midline) edge [loop left] node {G, O} (midline)
(skipspc) edge node [right] {5} (ends)
- (newline) edge node {5 [{\tt\char92par}]} (endn);
+ (newline) edge node {5 [{\tt\textbackslash par}]} (endn);
\begin{scope}[red]
\path (newline) edge [bend right] node [right=25,below=3]{J} (kanji)
(midline) edge node [below]{J} (kanji)
@@ -4972,7 +5628,7 @@ after ``beginning/ending of a group'' characters.
\item[\textsf{5}] \textit{end-of-line} (usually \verb+^+\verb+^J+).
\item[\textsf{10}] space (usually \sp).
\item[\textsf{O}] other characters, whose category code is in $\{3,4,6,7,8,11,12,13\}$.
-\item[\textsf{[\sp]}, \textsf{[{\tt\char92par}]}]
+\item[\textsf{[\sp]}, \textsf{[{\tt\textbackslash par}]}]
emits a space, or~\verb+\par+.
\end{description}
\end{minipage}
@@ -5014,7 +5670,7 @@ A character \texttt{U+FFFFF} (its category code is set to 14~(\textit{comment})
process it}, if and only if the following three conditions are satisfied:
\begin{enumerate}
\item The category code of \verb+\endlinechar+%
-\footnote{Usually, it is $\langle${return}$\rangle$
+\footnote{Usually, it is $\langle$\textit{return}$\rangle$
(whose character code is 13).} is 5~(\textit{end-of-line}).
\item The category code of \texttt{U+FFFFF} itself is 14~(\textit{comment}).
\item The input line matches the following ``regular expression'':
@@ -5128,11 +5784,11 @@ u
\begin{itemize}
\item JFMグルーの挿入は,和文文字を表すトークンを元に水平リストに(文字を表す)<char\_node>を
追加する過程で行われる.
-\item \Param{\hyperlink{fld:xks}{xkanjiskip}}の挿入は,水平ボックスへのパッケージングや行分割前に行われる.
+\item \Param{\hyperlink{fld:xks}{xkanjiskip}}の挿入は,hboxへのパッケージングや行分割前に行われる.
\item \Param{\hyperlink{fld:kanjiskip}{kanjiskip}}はノードとしては挿入されない.パッケージングや行分割の計算時に
「和文文字を表す2つの<char\_node>の間には\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}がある」ものとみなされる.
\end{itemize}
-しかし,\LuaTeX-jaでは,水平ボックスへのパッケージングや行分割前に全ての
+しかし,\LuaTeX-jaでは,hboxへのパッケージングや行分割前に全ての
\textbf{JAglue},即ちJFMグルー・\Param{\hyperlink{fld:xks}{xkanjiskip}}・\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}の
3種類を一度に挿入することになっている.これは,\LuaTeX において欧文の合字・
カーニング処理がノードベースになったことに対応する変更である.
@@ -5144,7 +5800,7 @@ u
には関係しないものがある.
-%<en>\subsection{definition of a cluster}
+%<en>\subsection{Definition of a Cluster}
%<ja>\subsection{「クラスタ」の定義}
\def\OA{$\text{\sf O}_{\text{\sf A}}$}
@@ -5166,7 +5822,7 @@ with the \textit{id} of it:
%</en>
%<*ja>
\item その \verb+\ltj@icflag+ の値が$[3,15)$に入るノードのリスト.
- これらのノードはある既にパッケージングされた水平ボックスから \verb+\unhbox+ で
+ これらのノードはある既にパッケージングされたhboxから \verb+\unhbox+ で
アンパックされたものである.
その\textit{id}は\textit{id\_pbox}である.
%</ja>
@@ -5234,7 +5890,7 @@ The \textit{id} is \textit{id\_hlist} if the node is an
%<*ja>
\item ボックス様のノード,つまり水平ボックス,垂直ボックス,罫線 (\verb+\vrule+),
そして\textit{unset\_node}.
- その\textit{id}は垂直に移動していない水平ボックスならば\textit{id\_hlist},
+ その\textit{id}は垂直に移動していないhboxならば\textit{id\_hlist},
そうでなければ\textit{id\_box\_like}となる.
%</ja>
@@ -5283,7 +5939,7 @@ $\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$は,その和文文字
\item[\textit{id\_math}] インライン数式.\\
便宜的に,$\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$ともに
「文字コード$-1$の欧文文字」とおく.
-\item[\textit{id\_hlist}] 縦方向にシフトされていない水平ボックス.\\
+\item[\textit{id\_hlist}] 縦方向にシフトされていないhbox.\\
この場合,$\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$はそれぞれ$p$の内容を表すリストの,
先頭・末尾のノードである.
\begin{itemize}
@@ -5291,11 +5947,11 @@ $\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$は,その和文文字
\begin{verbatim}
\hbox{\hbox{abc}...\hbox{\lower1pt\hbox{xyz}}}
\end{verbatim}
-のように,$p$の内容が別の水平ボックスで開始・終了している可能性も十分あり得る.そのような場合,
+のように,$p$の内容が別のhboxで開始・終了している可能性も十分あり得る.そのような場合,
$\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$の算出は,
-\emph{垂直方向にシフトされていない}水平ボックスの
+\emph{垂直方向にシフトされていない}hboxの
場合だけ内部を再帰的に探索する.例えば上の例では,$\mathit{Np}.\mathit{head}$は文字「a」を表すノードであり,
-一方$\mathit{Np}.\mathit{tail}$は垂直方向にシフトされた水平ボックス,
+一方$\mathit{Np}.\mathit{tail}$は垂直方向にシフトされたhbox,
\verb+\lower1pt\hbox{xyz}+ に対応するノードである.
\item また,先頭にアクセント付きの文字がきたり,末尾にイタリック補正用のカーンが
来ることもあり得る.この場合は,クラスタの定義のところにもあったように,それらは無視して算出を行う.
@@ -5325,11 +5981,11 @@ $\mathit{Np}.\mathit{head}$, $\mathit{Np}.\mathit{tail}$の算出は,
\textit{id}が\textit{id\_jglyph}であるか,\\
\textit{id}が\textit{id\_pbox}であって$\mathit{Np}.\mathit{head}$が\textbf{JAchar}であるとき.
-\item[和文B] リスト中の水平ボックスの中身の先頭として出現した和文文字.和文Aとの違いは,これの前に
+\item[和文B] リスト中のhboxの中身の先頭として出現した和文文字.和文Aとの違いは,これの前に
JFMグルーの挿入が行われない(\Param{\hyperlink{fld:xks}{xkanjiskip}},~\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}は入り得る)ことである.\\
\textit{id}が\textit{id\_hlist}か\textit{id\_disc}であって$\mathit{Np}.\mathit{head}$が\textbf{JAchar}であるとき.
-\item[欧文] リスト中に直接/水平ボックスの中身として出現している欧文文字.次の3つの場合が該当:
+\item[欧文] リスト中に直接/hboxの中身として出現している欧文文字.次の3つの場合が該当:
\begin{itemize}
\item \textit{id}が\textit{id\_glyph}である.
\item \textit{id}が\textit{id\_math}である.
@@ -5343,22 +5999,22 @@ JFMグルーの挿入が行われない(\Param{\hyperlink{fld:xks}{xkanjiskip}
\end{description}
-\subsection{段落/水平ボックスの先頭や末尾}
+\subsection{段落/hboxの先頭や末尾}
\paragraph{先頭部の処理}
-まず,段落/水平ボックスの一番最初にあるクラスタ\textit{Np}を探索する.
-水平ボックスの場合は何の問題もないが,段落の場合では以下のノード達を事前に読み飛ばしておく:
+まず,段落/hboxの一番最初にあるクラスタ\textit{Np}を探索する.
+hboxの場合は何の問題もないが,段落の場合では以下のノード達を事前に読み飛ばしておく:
\begin{itemize}
-\item \verb+\parindent+ 由来の水平ボックス($\mathit{subtype}=3$)
+\item \verb+\parindent+ 由来のhbox($\mathit{subtype}=3$)
\item \textit{subtype}が44~(\textit{user\_defined})でないようなwhatsit
\end{itemize}
-これは,\verb+\parindent+由来の水平ボックスがクラスタを構成しないようにするためである.
+これは,\verb+\parindent+由来のhboxがクラスタを構成しないようにするためである.
次に,\textit{Np}の直前に空白$g$を必要なら挿入する:
\begin{enumerate}
\item この処理が働くような\textit{Np}は\textsf{和文A}である.
-\item 問題のリストが字下げありの段落(\verb+\parindent+ 由来の水平ボックスあり)の場合は,
+\item 問題のリストが字下げありの段落(\verb+\parindent+ 由来のhboxあり)の場合は,
この空白$g$は「文字コード \texttt{'parbdd'} の文字」と\textit{Np}の間に入るグルー/カーンである.
-\item そうでないとき(\verb+noindent+ で開始された段落や水平ボックス)は,
+\item そうでないとき(\verb+noindent+ で開始された段落やhbox)は,
$g$は「文字コード \texttt{'boxbdd'} の文字」と\textit{Np}の間に入るグルー/カーンである.
\end{enumerate}
ただし,もし$g$がglueであった場合,この挿入によって\textit{Np}による行分割が新たに可能になるべきではない.
@@ -5369,7 +6025,7 @@ $g$は「文字コード \texttt{'boxbdd'} の文字」と\textit{Np}の間に
\end{itemize}
\paragraph{末尾の処理}
-末尾の処理は,問題のリストが段落のものか水平ボックスのものかによって異なる.
+末尾の処理は,問題のリストが段落のものかhboxのものかによって異なる.
後者の場合は容易い:最後のクラスタを\textit{Nq}とおくと,\textit{Nq}と「文字コード\
\texttt{'boxbdd'} の文字」の間に入るグルー/カーンを,
\textit{Nq}の直後に挿入するのみである.
@@ -5481,9 +6137,9 @@ x+y&\text{if\ }\Param{\hyperlink{fld:diffjfm}{diffrentjfm}}=\texttt{both};
\end{verbatim}
という3フォントを考え,
\[
- \overbrace{\Node{glyph}{{\tt\char`\\foo}, `あ'}}^{p}
-\longrightarrow \overbrace{\Node{glyph}{{\tt\char`\\bar}, `い'}}^{q}
-\longrightarrow \overbrace{\Node{glyph}{{\tt\char`\\baz}, `う'}}^{r}
+ \overbrace{\Node{glyph}{{\tt\textbackslash foo}, `あ'}}^{p}
+\longrightarrow \overbrace{\Node{glyph}{{\tt\textbackslash bar}, `い'}}^{q}
+\longrightarrow \overbrace{\Node{glyph}{{\tt\textbackslash baz}, `う'}}^{r}
\]
という3ノードを考える(それぞれ単独でクラスタをなす).
この場合,$p$と$q$の間は,実フォントが異なるにもかかわらず2.の状況となる一方で,
@@ -5495,7 +6151,7 @@ $q$と$r$の間は(実フォントが同じなのに)\texttt{jfmvar} キー
\begin{enumerate}
\item 両クラスタ(厳密には$\mathit{Nq}.\mathit{tail}$,$\mathit{Np}.\mathit{head}$)の中身の文字コードに対する
\Param{autospacing}パラメタが両方ともfalseだった場合は,長さ0のglueとする.
-\item ユーザ側から見た\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}パラメタの自然長が${\tt \char`\\maxdimen}=(2^{30}-1)\,{\rm sp}$で
+\item ユーザ側から見た\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}パラメタの自然長が${\tt \textbackslash maxdimen}=(2^{30}-1)\,{\rm sp}$で
なければ,\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}パラメタの値を持つglueを採用する.
\item 2.でない場合は,\textit{Nq}, \textit{Np}で使われているJFMに指定されている\Param{\hyperlink{fld:kanjiskip}{kanjiskip}}の値を用いる.
どちらか片方のクラスタだけが和文文字(\textsf{和文A}・\textsf{和文B})のときは,そちらのクラスタで使われている
@@ -5601,7 +6257,7 @@ If this attempt fails, \LuaTeX-ja use the method ``\textsf{\Param{kanjiskip}~[K]
between two clusters for \emph{kinsoku shori}.
%</en>
%<*ja>
-\item \LuaTeX-jaは2つのクラスタの間の禁則処理用のペナルティを調節するために「\textsf{P-normal~[PN]}」の方法を採用する.
+\item \LuaTeX-jaは2つのクラスタの間の禁則処理用のペナルティを設定するために「\textsf{P-normal~[PN]}」の方法を採用する.
%</ja>
\end{enumerate}
\end{quote}
@@ -5642,7 +6298,7 @@ If this attempt fails, \LuaTeX-ja use the method ``\textsf{\Param{kanjiskip}~[K]
\item \textit{Np}の中身の文字コードについて,「直前への\Param{\hyperlink{fld:xks}{xkanjiskip}}の挿入」が禁止されている
(つまり,\Param{jaxspmode}~(or \Param{alxspmode})パラメタが偶数).
\end{itemize}
-\item ユーザ側から見た\Param{\hyperlink{fld:xks}{xkanjiskip}}パラメタの自然長が${\tt \char`\\maxdimen}=(2^{30}-1)\,{\rm sp}$で
+\item ユーザ側から見た\Param{\hyperlink{fld:xks}{xkanjiskip}}パラメタの自然長が${\tt \textbackslash maxdimen}=(2^{30}-1)\,{\rm sp}$で
なければ,\Param{\hyperlink{fld:xks}{xkanjiskip}}パラメタの値を持つglueを採用する.
\item 2.でない場合は,\textit{Nq}, \textit{Np}(\textsf{和文A}/\textsf{和文B}なのは片方だけ)
で使われているJFMに指定されている\Param{\hyperlink{fld:xks}{xkanjiskip}}の値を用いる.
@@ -5767,7 +6423,7 @@ $\mathit{Nq}.\mathit{tail}$は無意味なので,
\end{itemize}
\paragraph{和文Aと和文Bの違い}
-先に述べたように,\textsf{和文B}は水平ボックスの中身の先頭(or 末尾)として出現している
+先に述べたように,\textsf{和文B}はhboxの中身の先頭(or 末尾)として出現している
和文文字である.リスト内に直接ノードとして現れている和文文字(\textsf{和文A})との違いは,
\begin{itemize}
\item \textsf{和文B}に対しては,JFMの文字クラス指定から定まる空白
@@ -5796,14 +6452,14 @@ $\mathit{Nq}.\mathit{tail}$は無意味なので,
\begin{itemize}
\item 1行目の\verb+\inhibitglue+は\textsf{Boundary-B~[\OB]}の処理のみを抑止するので,ピリオドと「A」の間には
\Param{\hyperlink{fld:xks}{xkanjiskip}}(四分アキ)が入ることに注意.
-\item 2行目のピリオドと「A」の間においては,前者が\textsf{和文B}となる(水平ボックスの中身の末尾として登場しているから)ので,
+\item 2行目のピリオドと「A」の間においては,前者が\textsf{和文B}となる(hboxの中身の末尾として登場しているから)ので,
そもそも\textsf{Boundary-B~[\OB]}の処理は行われない.よって,\Param{\hyperlink{fld:xks}{xkanjiskip}}が入ることとなる.
\item 3行目では,ピリオドの属するクラスタは\textsf{和文A}である.これによって,
ピリオドと「A」の間には\textsf{Boundary-B~[\OB]}由来の半角アキが入ることになる.
\end{itemize}
%</ja>
-%<en>\section{Patch for the \Pkg{listings} package}
+%<en>\section{Patch for the \Pkg{listings} Package}
%<ja>\section{\Pkg{listings} パッケージへの対応}
%<*en>
@@ -5857,7 +6513,7 @@ then the patch \Pkg{lltjp-listings} is loaded automatically at \verb+\begin{docu
%<*en>
\paragraph{Escaping to \LaTeX}
We used the \verb+process_input_buffer+ callback to output \textbf{JAchar}s.
-But it has a drawback; any control sequences whose name contains a \textbf{JAchar}
+But it has a drawback; any commands whose name contains a \textbf{JAchar}
cannot be used in any ``escape to \LaTeX''.
Consider the following input:
@@ -5884,7 +6540,7 @@ before the line is actually processed.
In the escape (between the character ``\verb+#+''),
the category code of \texttt{U+FFFFF} is set to 9~(\emph{ignored}).
Hence the control symbol ``\verb+\+\IVSA FFFFF'' will be executed,
-instead ``\verb+\ほげ+''.
+instead of ``\verb+\ほげ+''.
%</en>
%<*ja>
と変換されてから,実際の処理に回される.
@@ -5936,7 +6592,7 @@ instead ``\verb+\ほげ+''.
\end{itemize}
%</ja>
-%<en>\subsection{Class of characters}
+%<en>\subsection{Class of Characters}
%<ja>\subsection{文字種}
%<en>Roughly speaking, the \Pkg{listings} package processes input as follows:
@@ -6057,11 +6713,11 @@ Prev&Kanji&\multicolumn{4}{c}{\hrulefill \ outputs\ \hrulefill}&collects\\
\end{itemize}
%<*en>
-Charatcers above \texttt{U+0080} \emph{except \texttt{U+E0100}--\texttt{U+E01EF}
- (Variation Selectors Supplement)} are classified into above 5~classes by the following rules:
+Charatcers above \texttt{U+0080} \emph{except Variation Selectors}
+are classified into above 5~classes by the following rules:
%</en>
%<*ja>
-\texttt{U+0080}以降の\emph{漢字用異体字セレクタ以外の}各文字が
+\texttt{U+0080}以降の\emph{異体字セレクタ以外の}各文字が
Letter, Other, Kanji, Open, Closeのどれに属するかは次によって決まる:
%</ja>
\begin{itemize}
@@ -6147,7 +6803,7 @@ the \texttt{lstlisting} environment or other environments/commands.
また,行長と自然長との差を\textit{total}とおく.
-\subsection{第1段階:行末文字の位置調整}
+\subsection{行末文字の位置調整}
行末が文字クラス$n$の\textbf{JAchar}であった場合,
それを動かすことによって,\textit{total}のうち
\textbf{JAglue}が負担する分を少なくしようとする.
@@ -6193,7 +6849,7 @@ JFM中にある文字クラス$n$の定義の
\end{enumerate}
\begin{enumerate}
\item 行末の和文文字を移動したことで$\textit{total}=0$となれば,
-調整の必要はなく,行が格納されている水平ボックスの
+調整の必要はなく,行が格納されているhboxの
\texttt{glue\_set}, \texttt{glue\_sign}, \texttt{glue\_order}を再計算すればよい.
以降,$\textit{total}\neq 0$と仮定する.
\item \textit{total}が「\textbf{JAglue}以外のグルーの伸び量の合計」(以下,(A)の伸び量の
@@ -6202,7 +6858,7 @@ JFM中にある文字クラス$n$の定義の
よって,以下の処理を行う:
\begin{enumerate}
\item 各\textbf{JAglue}の伸び量を0とする.
-\item 行が格納されている水平ボックスの
+\item 行が格納されているhboxの
\texttt{glue\_set}, \texttt{glue\_sign}, \texttt{glue\_order}を再計算する.
これによって,\textit{total}は\textbf{JAglue}以外のグルーによって負担される.
\end{enumerate}
@@ -6223,18 +6879,61 @@ JFM中にある文字クラス$n$の定義の
\begin{enumerate}
\item (C)に属するグルーの伸び量を$p$倍する.
\item (D)--(H)に属するグルーの伸び量を0とする.
-\item 行が格納されている水平ボックスの
+\item 行が格納されているhboxの
\texttt{glue\_set}, \texttt{glue\_sign}, \texttt{glue\_order}を再計算する.
これによって,\textit{total}は\textbf{JAglue}以外のグルーによって負担される.
\end{enumerate}
\item \textit{total}が(A)--(H)の伸び量の合計よりも大きい場合,どうしようもないので
- \verb+^^;+何もせず,何もしない.
+ \verb+^^;+何もしない.
\end{enumerate}
%</ja>
%<*ja>
\section{IVS対応(未完)}
+\verb+luatexja.otf.enable_ivs()+ を実行し,IVS対応を有効にした状態では,
+\verb+pre_linebreak_filter+ や \verb+hpack_filter+ コールバックには
+次の4つが順に実行される状態となっている:
+\begin{description}
+\item[\tt ltj.do\_ivs] \textit{glyph\_node}~$p$の直後に,異体字セレクタ(を表す\textit{glyph\_node})
+が連続した場合に,$p$のフォントに対応したが持つ「異体字情報」に従って出力するグリフを変える.
+
+しかし,単に$p.\textit{char}$を変更するだけでは,後から
+font featureの適用(すぐ下)により置換される可能性がある.そのため,
+\verb+\CID+ や \verb+\UTF+ と同じように,\textit{glyph\_node}~$p$の代わりに
+\texttt{user\_id} が\textit{char\_by\_cid}であるようなuser-defined whatsitを用いている.
+\item[(\Pkg{luaotfload} によるfont featureの適用)]
+\item[\tt ltj.otf] \texttt{user\_id} が\textit{char\_by\_cid}であるようなuser-defined whatsitを
+きちんと\textit{glyph\_node}に変換する.この処理は,\verb+\CID+, \verb+\UTF+やIVSによる置換が,
+font featureの適用で上書きされてしまうのを防止するためである.
+\item[\tt ltj.main\_process] \textbf{JAglue}の挿入処理(\ref{sec-jfmglue}章)と,
+JFMの指定に従って各\textbf{JAchar}の「寸法を補正」することを行う.
+\end{description}
+
+問題は各フォントの持っているIVS情報をどのように取得するか,である.
+\Pkg{luaotfload} はフォント番号<font\_number>の情報を\
+\texttt{fonts.hashes.identifiers[<font\_number>]} 以下に格納している.
+しかし,OpenTypeフォントのIVS情報は格納されていないようである%
+\footnote{TrueTypeフォントに関しては,
+\begin{center}
+\texttt{fonts.hashes.idenfiers[<font\_number>]%
+ .resources.variants[<selector>][<base\_char>]}
+\end{center}
+に,<base\_char>番の文字の後に異体字セレクタ<selector>が続いた場合に
+出力すべきグリフが書かれてある.}.
+%例えば,小塚明朝Pr6N~Rでは,
+
+一方,\LuaTeX 内部の \texttt{fontloader} の返すテーブルには
+OpenTypeフォントでもTrueTypeフォントでもIVS情報が格納されている.
+具体的には……
+
+そのため,\LuaTeX-jaのIVS対応においては,\LuaTeX 内部の\
+\texttt{fontloader} を直接用いることで,フォントのIVS情報を取得している.
+20140114.0以降でキャッシュを用いるようにした要因はここにあり,
+\texttt{fontloader} の呼び出しでかなり時間を消費することから,
+%%% to_table を使わなくしたことで,メモリ使用量は減った
+IVS情報をキャッシュに保存することで2回目以降の実行時間を節約している.
+
\section{複数フォントの「合成」(未完)}
\section{\LuaTeX-jaにおけるキャッシュ}
@@ -6280,8 +6979,6 @@ its binary version is also updated.
\end{itemize}
%</en>
-
-
%<*ja>
\subsection{キャッシュの使用箇所}
@@ -6325,7 +7022,7 @@ The structure of the table is the following:
%</en>
\begin{table}[!tb]
- \centering
+ \centering\small
\caption{\texttt{cid} key and corresponding files}
\label{tab:cid-cache}
\vspace*{\medskipamount}
@@ -6369,7 +7066,7 @@ return {
\item[ltj-jisx0208.\{luc|lub\}]
The binary version of \texttt{ltj-jisx0208.lua}.
This is the conversion table between JIS~X~0208 and Unicode
-which is used in Kanji-code conversion control sequences for compatibility with \pTeX.
+which is used in Kanji-code conversion commands for compatibility with \pTeX.
%</en>
\end{list}
@@ -6389,7 +7086,7 @@ are created or updated.
\item[save\_cache\_luc(<filename>, <data>{[, <serialized\_data>]})]\
Same as \texttt{save\_cache}, except that only the binary cache is updated.
-The third argument <serialized data> is not usually given.
+The third argument <serialized\_data> is not usually given.
But if this is given, it is treated as a string representation of <data>.
\item[load\_cache(<filename>, <outdate>)]
@@ -6407,6 +7104,40 @@ Hence, the return value of \texttt{load\_cache} is non-nil,
if and only if the updated cache is found.
\end{list}
%</en>
+%<*ja>
+\subsection{内部命令}
+\LuaTeX-jaにおけるキャッシュ管理は,\texttt{luatexja.base}~(\texttt{ltj-base.lua})に
+実装しており,以下の3関数が公開されている.
+ここで,<filename>は保存するキャッシュのファイル名を\emph{拡張子なしで}指定する.
+\begin{list}{}%
+{\def\makelabel#1{\ttfamily#1}}
+\item[save\_cache(<filename>, <data>)]
+nilでない<data>をキャッシュ<filename>に保存する.
+テキスト形式の<filename>\texttt{.lua}のみならず,
+そのバイナリ版も作成/更新される.
+
+\item[save\_cache\_luc(<filename>, <data>{[, <serialized\_data>]})]\
+
+\texttt{save\_cache}と同様だが,バイナリキャッシュのみが更新される.
+第3引数<serialized\_data>が与えられた場合,それを
+<data>の文字列化表現として使用する.
+そのため,<serialized\_data>は普通は指定しないことになるだろう.
+
+\item[load\_cache(<filename>, <outdate>)]
+キャッシュ<filename>を読み込む.
+<outdate>は1引数(キャッシュの中身)をとる関数であり,
+その戻り値は「キャッシュの更新が必要」かどうかを示すブール値でないといけない.
+
+\texttt{load\_cache}は,まずバイナリキャッシュ<filename>\texttt{.\{luc|lub\}}を
+読みこむ.もしその内容が「新しい」,つまり<outdate>の評価結果が \texttt{false} なら
+\texttt{load\_cache}はこのバイナリキャッシュの中身を返す.
+もしバイナリキャッシュが見つからなかったか,「古すぎる」ならばテキスト版
+ <filename>\texttt{.lua}を読み込み,その値を返す.
+
+以上より,\texttt{load\_cache}自体がnilでない値を返すのは,ちょうど「新しい」キャッシュが
+見つかった場合である.
+\end{list}
+%</ja>
\begin{thebibliography}{99}
\addcontentsline{toc}{section}{\refname}