biblatex-ext (25aug19)

git-svn-id: svn://tug.org/texlive/trunk@51959 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 88 insertions, 43 deletions

diff --git a/Master/texmf-dist/doc/latex/biblatex-ext/CHANGES.md b/Master/texmf-dist/doc/latex/biblatex-ext/CHANGES.md
index cf1365195fa..bc259954df5 100644
--- a/Master/texmf-dist/doc/latex/biblatex-ext/CHANGES.md
+++ b/Master/texmf-dist/doc/latex/biblatex-ext/CHANGES.md
@@ -1,5 +1,15 @@
 # Changelog
 
+## Version 0.8 (2019-08-25)
+See <https://github.com/moewew/biblatex-ext/compare/v0.7a...v0.8>
+
+### Added
+- `\AtIntrocite` to customise initialisation code for introcite
+  citations.
+
+### Changed
+- Require `biblatex` v3.13 (some backwards compatiblity is in place).
+
 ## Version 0.7a (2019-04-04)
 See <https://github.com/moewew/biblatex-ext/compare/v0.7...v0.7a>
 
diff --git a/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.pdf b/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.pdf
index 90cf8b74ef7..11f1bc404c4 100644
--- a/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.pdf
+++ b/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.pdf
diff --git a/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.tex b/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.tex
index fb9d70ebeac..3d9f5da103b 100644
--- a/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.tex
+++ b/Master/texmf-dist/doc/latex/biblatex-ext/biblatex-ext.tex
@@ -116,6 +116,7 @@
     @collection,@commentary,@customa,@customb,@customc,@customd,%
     @custome,@customf,@inbook,@incollection,@inproceedings,%
     @inreference,@image,@jurisdiction,@legal,@legislation,@letter,%
+    @dataset,
     @manual,@misc,@movie,@music,@mvcollection,@mvreference,%
     @mvproceedings,@mvbook,@online,@patent,@performance,@periodical,%
     @proceedings,@reference,@report,@review,@set,@software,@standard,%
@@ -462,13 +463,13 @@
 
 \newcommand*{\ctan}{\mkbibacro{CTAN}}
 \newcommand*{\gitbaseurl}{https://github.com/moewew/biblatex-ext}
-\newcommand*{\extblxversion}{0.7a}
+\newcommand*{\extblxversion}{0.8}
 \newcommand*{\biber}{Biber}
 \newcommand*{\gitissuelink}[1]{%
   \href{\gitbaseurl/issues/#1}{issue \##1 on github}}
 
 \newrobustcmd*{\CSdelim}{%
-  \textcolor{spot}{\margnotefont context sensitive}}
+  \textcolor{spot}{\margnotefont\footnotesize context sensitive}}
 \newrobustcmd*{\CSdelimMark}{%
   \leavevmode\marginpar{\CSdelim}}
 
@@ -530,7 +531,7 @@
   author   = {Moritz Wemheuer},
   link     = {mwemheu@gmail.com},%
   revision = {\extblxversion},
-  date     = {\DTMDate{2019-04-04}},
+  date     = {\DTMDate{2019-08-25}},
 }
 
 \hypersetup{%
@@ -1388,13 +1389,14 @@ labels in a \hyperblxstyle[ext-numeric]{numeric} bibliography.
 \makeatother
 \endgroup
 
+
 The label produced by the \optval{plain} option can be customised as follows.
 \begin{ltxsyntax}
 \csitem{introcitepunct}
 
-The punctuation insterted between the label and the
-  rest of the entry with \kvopt{introcite}{plain}.
- The default value is a colon followed by a space.
+The punctuation inserted between the label and the
+rest of the entry with \kvopt{introcite}{plain}.
+The default value is a colon followed by a space.
 \begin{bibexample}
 \togglefalse{bbx:doi}
 \renewcommand*{\introcitepunct}{\highlight{\textbf{\addcolon}\textvisiblespace}}
@@ -1493,6 +1495,22 @@ overlay={%
 \end{bibexample}
 \makeatother
 
+In order to reproduce the citation label accurately in the bibliography,
+some initialisation and housekeeping needs to be done.
+\begin{ltxsyntax}
+\cmditem{AtIntrocite}{code}
+\cmditem*{AtIntrocite}*{code}
+
+Appends the \prm{code} to an internal hook executed when initializing
+\cmd{introcite}.
+The starred variant of the command clears the initialisation hook,
+so the defaults can be overwritten.
+The default settings execute the internal macro
+\cs{extblx@introcite@init}, which makes sure that the label produced
+for introcite takes into account the citation settings and suppresses
+unwanted citation tracking and hyperlinks.
+\end{ltxsyntax}
+
 The appearance of the citation label can be customised mostly as if it were
 produced by a true citation command called \cmd{bbx@introcite}.
 The delimiter context is \gencode{bbx@introcite}, the inner citation delimiters
@@ -1586,8 +1604,9 @@ so it might not be a bad idea to have \filename{ext-standard.bbx} open when
 perusing this section of the manual.
 
 \subsection{Field formats}\label{sec:opt:field}
-In a few places where the standard styles employ hard-coded formatting
-directives the styles of this bundle offer customisable formats instead.
+The styles of this bundle offer customisable field formats
+in a few places where the standard styles employ hard-coded formatting
+directives instead.
 Field formats can be modified with \cmd{DeclareFieldFormat}.
 
 \begin{bibfieldformatlist}
@@ -1700,10 +1719,15 @@ It is probably too late now.}
 \begin{bibexample}
 \toggletrue{bbx:innamebeforetitle}
 \togglefalse{bbx:isbn}
+\DeclareFieldFormat{editortype}{\mkbibparens{#1}}
+\DeclareDelimFormat{editortypedelim}{\addspace}
 \DeclareDelimFormat[bib,biblist]{innametitledelim}{\highlight{\textbf{%
   \addperiod}\textvisiblespace}\bibsentence}% <- hacky & hard-coded!
 \exampleprintbib{pines}
 \end{bibexample}
+Note that \bibfieldformat{editortype} and \cmd{editortypedelim}
+were changed for this example to avoid punctuation clashes.
+
 Since \cmd{nametitledelim} and \cmd{innametitledelim} are independent,
 the following output is easily achieved.
 Note that the optional argument to \cmd{DeclareDelimFormat} is used
@@ -1945,8 +1969,8 @@ See \cref{tab:citationdelims} for more details.
 The delimiters are set up to work as paired delimiters, but you are free to
 use non-matching pairs or to leave the opening or closing delimiter empty.
 If you want to add punctuation, the context-sensitive delimiters
-\gencode{nameyeardelim}, \gencode{nametitledelim} and friends as well as
-the context-insensitive \cmd{postnotedelim} and friends are more approriate.
+\gencode{nameyeardelim}, \gencode{nametitledelim},
+\gencode{postnotedelim} and friends are more approriate.
 
 \begin{remindbox}
 Although the outer delimiters can be set up using \cmd{DeclareCiteCommand}'s
@@ -2489,14 +2513,16 @@ bibliography macro \hyperbibmacro{oamark}.
 \usepackage[(*@\prm{\sty{biblatex-ext-oa} options}@*)]{biblatex-ext-oa}
 \end{biblatexcode}
 
-The package may load the support packages \hypersty{biblatex-ext-oa-doiapi},
-\hypersty{biblatex-ext-oasymb-pict2e}, \hypersty{biblatex-ext-oasymb-l3draw}
- and \hypersty{biblatex-ext-oasymb-tikz}.
-The preferred way to load these packages is via \sty{biblatex-ext-oa}'s
-package options.
+The package may load the support packages
+\hypersty{biblatex-ext-oa-doiapi},
+\hypersty{biblatex-ext-oasymb-pict2e},
+\hypersty{biblatex-ext-oasymb-l3draw}
+and \hypersty{biblatex-ext-oasymb-tikz}.
+The preferred way to use those packages is to have them loaded
+automatically via \sty{biblatex-ext-oa}'s package options.
 It should usually not be necessary to load any of these support packages
-directly with \cmd{usepackage}, but it is possible to use them as stand-alone
-packages should the need arise in other situations.
+directly with \cmd{usepackage}, but it is possible to use them as
+stand-alone packages should the need arise in other situations.
 
 \begin{warnbox}
 Note that the macro \hypercmd{oasymbol} must be defined and should contain an
@@ -2569,10 +2595,11 @@ Set \hypercmd{oasymbol} to output the symbol identified as \prm{symbol}.
 The available options can be found in \cref{sec:oa:symbol}.
 
 \begin{warnbox}
-Note that this option is only available if \hypercmd{symbolpackage} has been
-set to a valid value different from \optval{false} or one of the open access
-symbol packages has been loaded manually (the latter is usually not recommended,
-the option \hypercmd{symbolpackage} is the preferred way to load those
+Note that this option is only available if the
+option~\hyperopt{symbolpackage} has been set to a valid value different
+from \optval{false} or one of the open access symbol packages has
+been loaded manually (the latter is usually not recommended, the
+option~\hyperopt{symbolpackage} is the preferred way to load those
 packages).
 \end{warnbox}
 
@@ -2670,7 +2697,8 @@ or \bibmacro{doi+eprint+url}.
 The heart of the package \sty{biblatex-ext-oa} is the bibliography option
 \hyperopt{openaccess}, which can be set globally, per type or per entry.
 
-A short example document can be found at
+A longer example document exploring various aspects of open access
+detection can be found at
 \url{https://github.com/moewew/biblatex-ext/blob/master/oaslinks.tex}.
 
 \begin{optionlist}
@@ -2683,8 +2711,9 @@ The initial value is \optval{auto} unless the package is loaded with the
 \hyperopt{enable} option set to \optval{false} in which case the initial
 value changes to \optval{none}.
 
-All following values are valid at all three levels (global, per-type and
-per-entry), but it may not be useful to use a particular option at all levels.
+All of the following values are valid at all three levels (global,
+per-type and per-entry), but not all options may be useful at all
+available levels.
 \begin{valuelist}
 \item[auto] Use a semi-automatic heuristic to find the best open access URL.
 
@@ -2732,7 +2761,7 @@ per-entry), but it may not be useful to use a particular option at all levels.
 
 \item[\prm{open access field}] Specifies that the open access version is given
   by \prm{open access field}.
-  This value would normally be used only on a per-enry level.
+  This value would normally be used only on a per-entry level.
 
   Any field for which \hypercmd{DeclareOpenAccessFieldUrl} has declared a URL
   specification is a valid \enquote{open access field}.
@@ -2796,8 +2825,9 @@ the following declarations are active.
 \DeclareOpenAccessEprintUrl[always]{arxiv}{%
   https://arxiv.org/\abx@arxivpath/\thefield{eprint}}
 \end{biblatexcode}
-Note the optional argument \texttt{always} for \bibfield{arxiv}, because
-articles on the arXiv are always open access.
+Since articles on the arXiv are always open access, the declaration
+for \bibfield{arxiv} features the optional \prm{openness} argument
+\texttt{always}.
 
 \cmditem{DeclareOpenAccessEprintAlias}{alias}{eprinttype}
 
@@ -2850,8 +2880,9 @@ The \optval{auto} detection works as follows.
   \end{itemize}
 \end{itemize}
 
-For \optval{auto}-detection, an open access article with DOI would ideally
-look like this.
+For \optval{auto}-detection, an open access article with DOI would
+ideally use the field annotation \texttt{openaccess}
+(\lstinline[style=extblxstylebibtex]|{doi+an = {=openaccess},|).
 % cipriani
 \inputexamplebibfile[listing options={linerange={27-38},
                                       style = extblxstylebibtex}]
@@ -2902,7 +2933,7 @@ Unpaywall API\fnurl{https://unpaywall.org/}.
 This package can only be used with \lualatex{} and needs online
 access.
 Furthermore the Unpaywall API requires an email address and asks to limit
-calls to 100000 per day\fnurl{https://unpaywall.org/products/api}.
+requests to 100,000 calls per day\fnurl{https://unpaywall.org/products/api}.
 \end{warnbox}
 
 To avoid too many calls to the API, the package caches its information in the
@@ -2923,7 +2954,7 @@ an email.
 There is no predefined default email address.
 If the package is loaded and no email was provided until the
 beginning of the document (as tested in an \cmd{AtEndPreamble} hook)
-you will recieve a warning.
+you will receive a warning.
 A fatal error will be thrown if you try to query the Unpaywall database
 without an email address.
 \end{warnbox}
@@ -2953,30 +2984,30 @@ API is the DOI and to \prm{false} otherwise.
 
 
 \subsection{Open access symbols}\label{sec:oa:symbol}
-Currently, this bundle offers three options to provide the open access
+Currently, this bundle offers three methods of drawing the open access
 symbols.
+Each method is packed up in a little sub-package, end users are not
+expected to load these packages manually, instead they should use
+the option~\hyperopt{symbolpackage} of \hypersty{biblatex-ext-oa}.
+
 The package \hypersty{biblatex-ext-oasymb-pict2e} draws the symbols using
 \sty{pict2e}'s \env{picture} environment.
 The package \hypersty{biblatex-ext-oasymb-tikz}
 uses \pgftikz's \env{tikzpicture}.
 The package \hypersty{biblatex-ext-oasymb-l3draw} finally
 uses \LaTeX3's \sty{l3draw} package.
-The main purpose of these packages is to define the macro \cmd{oasymbol} for
-use with \sty{biblatex-ext-oa}.
+The main purpose of these packages is to define the macro \cmd{oasymbol}
+for use with \sty{biblatex-ext-oa}.
 
-The packages should usually not have to be loaded explicitly, instead
-they are loaded via the \hyperopt{symbolpackage} option of
-\hypersty{biblatex-ext-oa}.
-
-All packages define a similar set of macros, so they can not be loaded
-together.
+All packages define a similar set of macros, so they are not indended to 
+be loaded together.
 If used as stand-alone packages, all packages only have one option.
 
 \begin{optionlist}
 \optitem[plos]{symbol}{\optval{plos}, \optval{oanet}}
 
-This options determines which of the two provided symbols is going to be used
-for \hypercmd{oasymbol}.
+This options determines which of the two available symbols is going to
+be used for \hypercmd{oasymbol}.
 
 The possible values are
 \begin{valuelist}
@@ -3136,8 +3167,12 @@ See also \filename{CHANGES.md}.
 
 The numbers on the right indicate the relevant section of the manual.
 \begin{changelog}
+\begin{release}{0.8}{2019-08-25}
+  \item Added \hypercmd{AtIntrocite} \see{sec:opt:style}
+  \item Require \sty{biblatex} v3.13 (2010/08/17)\see{sec:req}
+\end{release}
 \begin{release}{0.7a}{2019-04-04}
-  \item Fix bug in the \opt{env} option of \hypercmd{printbibtabular}%
+  \item Fixed bug in the \opt{env} option of \hypercmd{printbibtabular}%
     \see{sec:tabularbib}
 \end{release}
 \begin{release}{0.7}{2019-02-08}