summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2007-04-03 00:14:46 +0000
committerKarl Berry <karl@freefriends.org>2007-04-03 00:14:46 +0000
commitdb7c29b795e61406c9a9fc1b6353694c3268774a (patch)
tree143dc81d4d1f8a90793d158d5d77bbf99bc95605 /Master/texmf-dist/doc/latex
parentca1b85bdf009dbd78fbbd650d4313d056e2e6761 (diff)
new latex package bullcntr (11feb07)
git-svn-id: svn://tug.org/texlive/trunk@4104 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/latex')
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/README56
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdfbin0 -> 773249 bytes
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex1610
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex310
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex688
-rw-r--r--Master/texmf-dist/doc/latex/bullcntr/manifest.txt101
6 files changed, 2765 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/bullcntr/README b/Master/texmf-dist/doc/latex/bullcntr/README
new file mode 100644
index 00000000000..c648c943135
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/README
@@ -0,0 +1,56 @@
+The bullcntr package defines the command "\bullcntr", which can be thought
+of as an analogue of the "\fnsymbol" command: like the latter, it displays
+the value of a counter lying between 1 and 9, but uses, for the purpose, a
+regular pattern of bullets. Approximately, these nine patterns of bullets
+are laid down as follows:
+
+
+ *
+ * * *
+ * *
+ 1 2 3
+
+
+
+ * * * * *
+* * * * *
+ * * * * *
+ 4 5 6
+
+
+
+ * * * * * * * *
+* * * * * * * *
+ * * * * * * * *
+ 7 8 9
+
+
+An ancillary package is included along with the bullcntr package: the
+bullenum package. This is a "wrapper" that calls bullcntr and, in
+addition, defines a new environment, called "bullenum", that lets you
+create enumeration lists numbered via the "\bullcntr" command.
+
+I wrote this package as an amusing exercise during a boring afternoon in
+which I had nothing better to do!
+
+The bullcntr package may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, available at
+ http://www.latex-project.org/lppl.txt
+See the files `00readme.txt' and `manifest.txt' for further details.
+
+For more information, read the following files:
+
+00readme.txt -- start by reading this file
+bullcntr-man.pdf -- general information on the bullcntr package (PDF)
+
+Other files that make up the distribution are:
+
+manifest.txt -- legal stuff
+bullcntr.dtx -- main source file
+bullcntr.ins -- installation script
+bullcntr-man.tex -- LaTeX source of `bullcntr-man.pdf'
+bullcntr-sam.tex -- sample code that uses the bullcntr package
+bullenum-sam.tex -- sample code that uses the bullenum package
+
+See the file `manifest.txt' for a more precise specification of what files
+constitutes a LPPL-compliant distribution.
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
new file mode 100644
index 00000000000..0ebab7c5f2b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
new file mode 100644
index 00000000000..2231316639e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
@@ -0,0 +1,1610 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+% "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+\usepackage{bullenum}
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Overview\\of \tbull
+ \thanks{This document describes version \bullvers\ (\bulldate).
+ Copyright \copyright~2007 by G.~Mezzetti
+ (see page~\pageref{S:Copyright} for details).}}
+\author{G.~Mezzetti\\{\ttfamily\normalsize
+ gustavo.mezzetti@istruzione.it}}
+\date{April~2, 2007}
+
+\newcommand*{\bullvers}{0.04}
+\newcommand*{\bulldate}{2007/04/02}
+\newcommand*{\filename}{bullcntr-man.dtx}
+
+\DeclareRobustCommand*{\command}[1]{%
+ {\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+ {\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{\mbox{\(\langle\textit{#1}\rangle\)}}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\env}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\opt}[1]{{\normalfont\ttfamily #1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+\newcommand*{\hreff}[1]{\href{#1}{\texttt{#1}}}
+\newcommand*{\Enumerat}{enumerate}
+\newcommand*{\beenv}{\env{\Bullenum}}
+\newcommand*{\enenv}{\env{\Enumerat}}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+\makeatletter
+\newcommand*\hyref[1]{% actually two arguments, <label> and <text>
+ \@ifundefined{r@#1}{% #1 is <label>
+ \G@refundefinedtrue % \protect seems superfluous in our context
+ \@latex@warning{Reference `#1' on page \thepage \space undefined}%
+ \@firstofone % returns <text> (removing braces)
+ }{%
+ \expandafter\@hyref\expandafter{\csname r@#1\endcsname}%
+ }%
+}
+\@ifdefinable\@hyref{\def\@hyref#1{%
+ \expandafter\@@hyref#1%
+}}
+\@ifdefinable\@@hyref{\def\@@hyref#1#2#3#4#5{%
+ \hyperlink{#4}% <text> follows and becomes the second argument
+}}
+\makeatother
+
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+ We describe a \LaTeX\ package which defines a new command, similar
+ to \verb|\fnsymbol|, for displaying the value of a counter: this
+ command typesets a number of bullets equal to the value of the
+ counter, in a nice arrangement. The value of the counter must lie
+ between 1 and~9, inclusive.
+
+ We also present an ancillary package which defines a new
+ environment, similar to \enenv, for creating lists of items
+ numbered in this way.
+\end{abstract}
+
+
+
+\tableofcontents
+
+
+
+\begingroup
+
+\setlength{\parskip}{\medskipamount}
+\setlength{\parindent}{0pt}
+
+\section*{Copyright notice}
+\label{S:Copyright}
+\vspace{-\parskip}
+
+Copyright \copyright~2007 by Gustavo \textsc{Mezzetti}. All rights
+are reserved, except as noted below.
+
+This document has been produced by feeding to a \LaTeX\ typesetting
+engine the file \filedir{\filename}. This file is part of a work
+named ``\bull\ package'', and may distributed and/or modified only as
+a part thereof. Subsection~\ref{SS:License} on
+page~\pageref{SS:License} explains the conditions under which \tbull\
+may be distributed and/or modified.
+
+Permission is granted to make printed copies of this document, by any
+means (\emph{e.g.}, photocopying, direct printing from the electronic
+version, and so on).
+
+Note, though, that distribution of this document alone is
+``distribution of only part of the Work'' in the sense of the \LaTeX\
+Project Public License, and should be avoided: please distribute, in
+addition, the source file \filedir{\filename} together with all other
+files listed in \filedir{manifest.txt}, as explained as well in
+Subsection~\ref{SS:License} and in the file \filedir{manifest.txt}
+itself.
+
+\endgroup
+
+
+
+\clearpage
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+\label{S:Intro}
+
+I can't remember exactly where the idea of this package arose from,
+but I am pretty sure that the first time I saw a list of items
+numbered with an increasing number of bullets was in certain
+handwritten notes about sheaves cohomology, may be a decade or so ago.
+Since then, I had repeatedly thought of writing a \LaTeX\ package to
+implement this kind of numbering, but I had never resolved to actually
+do so, until very recently, when I suddenly decided to sit down and
+% ( paren match
+write the code!~:-)
+
+Regrettably, I had to discover a major bug in the macros I had dashed
+off in such a haste, which required extensive (and more careful!)\
+redesign of the code. I took this opportunity to thoroughly
+reorganize the package, making it easier, for the user, to switch from
+one style of bullets to another, and also adding an ancillary package
+that simplifies the creation of lists numbered with bullets.
+
+This document describes \tbull\ version \textbf{\bullvers}
+(\textbf{\bulldate}).
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Installing \tbull}
+
+As usual for \LaTeX\ distributions, \tbull\ is distributed in the form
+of a \filedir{.dtx} file, namely \filedir{\Bullcntr.dtx}, and an
+accompanying \filedir{.ins} file, namely \filedir{\Bullcntr.ins}.
+
+
+
+\subsection{Installation}
+
+To install the package, run \LaTeX\ (or Plain \TeX) once on the file
+\filedir{\Bullcntr.ins}. This will generate the following \LaTeX\
+input files:
+%
+\begin{quote}
+ \ttfamily
+ \Bullcntr.sty\\
+ \Bullenum.sty
+\end{quote}
+%
+To finish the installation, move them into a \LaTeX\ input directory.
+The above listing of the files you need to move is also displayed on
+the terminal at the end of the run of the file
+\filedir{\Bullcntr.ins}. The documentation of your \TeX\ installation
+should tell you how to find the \LaTeX\ input directory/ies, and
+probably also how to create new \LaTeX\ input directories reserved to
+contain your private classes and packages. If your \TeX\ installation
+offers you the chance of defining your private \LaTeX\ input
+directories, I recommend you exploit this possibility and place the
+generated files into such a directory.
+
+Please note that before using \tbull\ you must read the license (see
+Subsection~\ref{SS:License}) to see whether its terms are acceptable
+for you, especially for what concerns the lack of any warranty; if
+they are not, don't use it.
+
+
+
+\subsection{Documentation}
+
+To produce the documentation, run \LaTeX\ three times (for the table
+of contents to be correct) on the file \filedir{\Bullcntr.dtx}. This
+won't produce the index and the change history, however: for those,
+you have to run \emph{MakeIndex} on the files \filedir{\Bullcntr.idx}
+and \filedir{\Bullcntr.glo}, produced during the last of the aforesaid
+three \LaTeX\ runs, with the styles \filedir{gind.ist} and
+\filedir{gglo.ist}, respectively (these styles are part of the
+standard \LaTeX\ distribution); then pass \filedir{\Bullcntr.dtx}
+through \LaTeX\ twice more.
+
+
+
+\subsection{License}
+\label{SS:License}
+
+The \bull\ package is \emph{not} in the public domain: its author,
+Gustavo \textsc{Mezzetti}, owns the copyright, and in general retains
+all the rights therein; but as a special exception, the author grants
+you the permissions indicated below.
+
+
+
+\subsubsection{Distribution and/or modification}
+
+The \bull\ package may be distributed and/or modified under the
+conditions of the \href{http://www.latex-project.org/lppl.txt}{\LaTeX\
+Project Public License}, either version~1.3 of this license or (at
+your option) any later version. The latest version of this license is
+in
+%
+\begin{quote}
+ \hreff{http://www.latex-project.org/lppl.txt}
+\end{quote}
+%
+and version~1.3 or later is part of all distributions of \LaTeX\
+version 2005/12/01 or later.
+
+The \bull\ package has the LPPL maintenance status
+``author-maintained''.
+% Switching to the ``maintained'' status (which
+% is the status recommended by the \TeX\ community) is currently being
+% considered, but for now I still prefer to keep my tiny unfledged
+% % ( paren match
+% creation under my protecting wing\ldots~:-)\spacefactor=\sfcode`.
+% \space Leaving jokes apart, I'm waiting to see if other ``disastrous''
+% mistakes are still lurking in the code, and whether there is an
+% interest of the \LaTeX\ community into this silly package that
+% justifies maintaining it in a more efficient way.
+
+The file \filedir{manifest.txt} included in \tbull\ specifies what
+this package consists of; more precisely, it explains how the
+locutions ``Work'' and ``Compiled Work'', used in the \LaTeX\ Project
+Public License, are to be interpreted in the case of this work.
+
+
+
+\subsubsection{Use}
+
+The use of \tbull\ is unrestricted, provided that you accept the terms
+and conditions of the \LaTeX\ Project Public License and of the
+following subsection for what concerns the absence of any warranty.
+
+
+
+\subsubsection{No warranty}
+
+There is absolutely no warranty for \tbull. The Copyright Holder
+provides \tbull\ ``as is'', without warranty of any kind, either
+expressed or implied, including, but not limited to, the implied
+warranties of merchantability and fitness for a particular purpose.
+The entire risk as to the quality and performance of \tbull\ is with
+you. Should \tbull\ prove defective, you assume the cost of all
+necessary servicing, repair, or correction.
+
+In no event will The Copyright Holder, or any other party who may
+distribute and/or modify \tbull\ as permitted by the \LaTeX\ Project
+Public License, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+\tbull\ or out of inability to use it (including, but not limited to,
+loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of \tbull\ to operate with any other
+programs), even if The Copyright Holder or said other party has been
+advised of the possibility of such damages.
+
+
+
+\subsection{Your comments}
+
+If you have comments, suggestions, etc.\ about \tbull, please let me
+know them: I'll be happy to read what you think. My e-mail address is
+indicated under the title of this document. Please include the
+\emph{exact} phrase \verb*|bullcntr package| in the \emph{subject} of
+your message; otherwise, it could be thrown away by a mail filter.
+
+
+
+\section{Using \tbull}
+
+Version \bullvers\ of \tbull\ is a bit more elaborate than its
+predecessor: in addition to the
+\hyref{SS:bullcntr}{\command{\Bullcntr} main command} and to the
+\hyref{SS:Hooks}{hooks for the bullets}, it now features
+\hyref{SS:CntrInvo}{options} and \hyref{SS:BullStyl}{predefined bullet
+styles}.
+
+
+
+\subsection{Package invocation and options}
+\label{SS:CntrInvo}
+
+You load \tbull\ by means of the usual \verb|\usepackage| declaration:
+%
+\begin{flushleft}
+ \verb|\usepackage|\meta{options}\verb|{bullcntr}|
+\end{flushleft}
+%
+You may specify one of the following, mutually exclusive options,
+which affect the size (or the type) of the bullets used by
+\verb|\bullcntr| command:
+%
+\begin{description}
+%
+\item[\opt{largectrbull}]
+(Relatively) ``large'' bullets are used for all values from 1 to~9.
+This has exactly the same effect as a \verb|\largectrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{smallctrbull}]
+The opposite: ``small'' bullets are used for all values from 1 to~9.
+This has exactly the same effect as a \verb|\smallctrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{smartctrbull}]
+(Relatively) ``large'' bullets are used for values from 1 through~5
+(inclusive), while ``small'' ones are used for those greater than or
+equal to~6. This has exactly the same effect as a
+\verb|\smartctrbull| global declaration (see
+Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{heartctrbull}]
+Hearts are used (instead of bullets) for all values from 1 to~9. This
+has exactly the same effect as a \verb|\heartctrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\end{description}
+%
+If you don't specify any, the default option is \opt{smartctrbull}.
+
+
+
+
+\subsection{The \command{\Bullcntr} command}
+\label{SS:bullcntr}
+
+This is a command analogous to the \verb|\fnsymbol| command (see the
+\textsl{\LaTeX book} \cite[Subsection~C.8.4]{LaTeXbook}): you may use
+it directly in the text, as in
+%
+\begin{flushleft}
+ \ldots\texttt{the counter value displays as}\verb|~\bullcntr{|\meta{ctr}\verb|}|\ldots
+\end{flushleft}
+%
+(where \meta{ctr} is a counter name, defined with \verb|\newcounter|),
+or you may redefine the \verb|\the|\meta{ctr} command, as in
+%
+\begin{flushleft}
+ \verb|\renewcommand*{\the|\meta{ctr}\verb|}{\bullcntr{|\meta{ctr}\verb|}}|
+\end{flushleft}
+%
+By way of example, in the case of a counter named \cnt{myctr}, you
+would write
+%
+\begin{verbatim}
+The counter value displays as~\bullcntr{myctr}.
+\end{verbatim}
+%
+directly in the text, or the following to redefine the
+\verb|\themyctr| command:
+%
+\begin{verbatim}
+\renewcommand*{\themyctr}{\bullcntr{myctr}}
+\end{verbatim}
+%
+
+When \( \verb|\value{|\meta{ctr}\verb|}|=0 \), the command
+\verb|\bullcntr{|\meta{ctr}\verb|}| silently typesets nothing (not
+even a space); but when \( \verb|\value{|\meta{ctr}\verb|}|<0 \) or \(
+\verb|\value{|\meta{ctr}\verb|}|>9 \), an error is generated.
+
+
+
+\subsection{Hooks for the bullets}
+\label{SS:Hooks}
+
+The main task of \tbull\ is to calculate the position of the
+``bullets'' used to display the value of the given counter; but you
+are free to decide what characters are actually drawn in these
+positions: they need not necessarily be ``bullets''. Indeed, two
+``hooks'' are provided in the package to define the actual characters
+employed, and the package simply invokes these hooks.
+
+If the value of the counter being displayed is less than~6 (less
+than~6 bullets need to be drawn), the \verb|\bullcntr| command invokes
+the \verb|\counterlargebullet| macro to draw each of them. If you
+want, you should redefine this macro (using \verb|\renewcommand|) so
+that it generates a symbol suitable for arrangements in which the
+``bullets'' are relatively spaced out. For example,
+%
+\begin{verbatim}
+\renewcommand*{\counterlargebullet}{\textbullet}
+\end{verbatim}
+%
+
+You don't \emph{need} to redefine this command: a convenient default
+definition is already set by \tbull\ itself.
+
+When, on the other hand, the value of the counter being displayed is
+greater than or equal to~6 (6~or more bullets need to be drawn), the
+\verb|\bullcntr| command calls the \verb|\countersmallbullet| macro.
+It is intended that this macro typesets a character suitable for
+situations in which the ``bullets'' have to be grouped in a compact
+cluster; typically, this means that a smaller ``bullet'' is used than
+the one typeset by \verb|\counterlargebullet|, although it is
+perfectly in order to use the same character in both situations. If
+you want (but you don't \emph{need} to do this, since \tbull\ already
+defines this macro) you may change the definition with
+\verb|\renewcommand|, \emph{e.g.}:
+%
+\begin{verbatim}
+\renewcommand*{\countersmallbullet}{\textperiodcentered}
+\end{verbatim}
+%
+
+For both hooks, it is best to \verb|\protect| fragile commands that
+appear in the code used in their (re)definition.
+
+``Macho \TeX\ programmers'' may also use \verb|\def| instead of
+\verb|\renewcommand|; for example:
+%
+\begin{verbatim}
+\def\counterlargebullet{\textbullet}
+\def\countersmallbullet{\textperiodcentered}
+\end{verbatim}
+%
+(Actually, in a case like this, even \verb|\let| could be used.)
+
+
+
+\subsection{Predefined bullet styles}
+\label{SS:BullStyl}
+
+To spare you the nuisance of redefining the hooks mentioned in
+Subsection~\ref{SS:Hooks}, at least in normal situations, four
+``bullet styles'' are already predefined by \tbull, covering what the
+author believes are the most common cases. You can switch to any of
+these predefined styles by means of the following four declarations.
+
+\begin{description}
+
+\item[\command{largectrbull}]
+This declaration causes (relatively) ``large'' bullets to be used for
+all values from 1 to~9.
+
+\item[\command{smallctrbull}]
+This declaration causes ``small'' bullets to be used for all values
+from 1 to~9.
+
+\item[\command{smartctrbull}]
+This declaration causes (relatively) ``large'' bullets to be used for
+values from 1 to~5 (inclusive), and ``small'' bullets for values equal
+to or above~6.
+
+\item[\command{heartctrbull}]
+This declaration causes little hearts (instead of bullets) to be used
+for all values from 1 to~9.
+
+\end{description}
+
+These are in all respects normal declarations, obeying to ordinary
+scoping rules. The corresponding options described in
+Subsection~\ref{SS:CntrInvo} simply set the style at the outer
+(global, or document-wide) level.
+
+
+
+\subsection{Cross-references}
+\label{SS:CrossRef}
+
+Cross-references now work fine with the \verb|\bullcntr| command. You
+may use \verb|\label| (preceded by \verb|\refstepcounter| if
+necessary) in the usual way to label, for example, an item in a list
+numbered via \verb|\bullcntr| (recall that \verb|\item| calls
+\verb|\refstepcounter| by itself), and elsewhere cross-reference that
+item with \verb|\ref|: the reference will be typeset correctly, using
+the same bullet style that was in effect at the spot where
+\verb|\label| (and not \verb|\ref|) was used.
+
+Examples of such cross-references are shown later, in
+Subsection~\ref{SS:CrossXmp}.
+
+
+
+\section{Using \tbenu}
+
+The \bull\ package was conceived for the purpose of imitating in print
+an unusual way of numbering items in a list, that the author saw in
+certain handwritten notes (see the \hyref{S:Intro}{Introduction}).
+With the \verb|\bullcntr| command at hand, this could be achieved
+simply by saying something like
+%
+\begin{verbatim}
+\begin{enumerate}
+ \renewcommand*{\theenumi}{\bullcntr{enumi}}
+ \renewcommand*{\labelenumi}{\theenumi}
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{enumerate}
+\end{verbatim}
+%
+This, nonetheless, is not perfect, since it breaks if the \enenv\
+environment is moved inside another \enenv, because of the explicit
+mention of \verb|\theenumi| and of \verb|\labelenumi|.
+
+For this reason, and also to facilitate the use of the
+\verb|\bullcntr| command for numbering list items, a new package has
+been added to \tbull; this helper package, called \benu, simply
+defines the \beenv\ environment, a variation of \enenv\ that numbers
+its items using the \verb|\bullcntr| command. Indeed,
+%
+\begin{verbatim}
+\begin{bullenum}
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+is equivalent to
+\begin{flushleft}
+ \verb|\begin{enumerate}|\\
+ \verb| \renewcommand*{\theenum|\meta{lvl}\verb|}{\bullcntr{enum|\meta{lvl}\verb|}}|\\
+ \verb| \renewcommand*{\labelenum|\meta{lvl}\verb|}{\theenum|\meta{lvl}\verb|}|
+\end{flushleft}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}\\[\topsep]
+\end{flushleft}
+\begin{verbatim}
+\end{enumerate}
+\end{verbatim}
+%
+where \meta{lvl} is \texttt{i}, \texttt{ii}, \texttt{iii},
+or~\texttt{iv}, depending on the current level of the \enenv\
+environment.
+
+In other words, \beenv\ can be used in every place where \enenv\ can,
+and numbers its items with an increasing number of bullets, regardless
+of the definition of \verb|\theenum|\meta{lvl} and
+\verb|\labelenum|\meta{lvl}. Of course, the environment must contain
+no more than 9~items. Moreover, if you use \verb|\label| to set up a
+reference, subsequent \verb|\ref|'s will typeset the reference as a
+``bulletted'' number, using, for the ``bullets'', the character that
+was current at the time the \verb|\label| was encountered (in brief,
+they will do the right thing).
+
+Notice that you should \emph{not} load \tbull\ if you invoke \benu,
+because the latter calls the former. As explained below, you may pass
+to \tbenu\ the options that you would require from \bull: the outer
+package will forward them to the inner one. Actually, most users will
+just use \tbenu, and never call \bull\ directly.
+
+
+
+\subsection{Package invocation and options}
+\label{SS:EnumInvo}
+
+You invoke \tbenu\ with the usual \verb|\usepackage| declaration put
+in the preamble of your document. In this declaration you may specify
+exactly the same options that you would pass to \tbull, with the same
+meaning (see Subsection~\ref{SS:CntrInvo}). The \benu\ package then
+calls \bull\ for you, just passing on to it the options, if any, you
+asked for.
+
+% For example, if, when preparing a valentine, you want to use the
+% \beenv\ environment to create list numbered with hearts, you might
+% say
+% %
+% \begin{verbatim}
+% \usepackage[heartctrbull]{bullenum}
+% \end{verbatim}
+% %
+% at the beginning of your preamble.
+
+
+
+\subsection{The \beenv\ environment}
+\label{SS:EnumEnvi}
+
+This environment is syntactically analogous to \enenv, but numbers its
+items with an increasing number of bullets (using the \verb|\bullcntr|
+command). You must include no more than 9~items in this environment.
+The style of the bullets is governed by the declarations described in
+Subsection~\ref{SS:BullStyl}, according to ordinary scoping rules. A
+change local to the environment being employed can be obtained by
+enclosing the relevant declaration inside the environment itself; for
+example,
+%
+\begin{verbatim}
+\begin{bullenum}
+ \smallctrbull
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+will use ``small'' bullets regardless of whatever style might have
+been in force outside the \beenv\ environment.
+
+\pagebreak[2]
+
+If you want finer control over the appearance of the ``bullets'', just
+redefine the hooks of Subsection~\ref{SS:Hooks}; doing this inside the
+environment itself will keep changes to the hooks local. For example,
+you might say:
+%
+\begin{verbatim}
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}
+ {$\scriptscriptstyle \diamondsuit$}
+ \renewcommand*{\countersmallbullet}{\counterlargebullet}
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+(yes, ``macho \TeX\ programmers'' may also use \verb|\def|, or
+\verb|\let| where appropriate).
+
+Of course, this environment respects the definitions of
+\verb|\theenum|\meta{lvl} and of \verb|\labelenum|\meta{lvl} in force
+outside the environment itself, for \( \meta{lvl} =
+\texttt{i},\ldots,\texttt{iv} \).
+
+
+
+\subsection{Nesting \beenv\ environments}
+\label{SS:Nesting}
+
+Because a \beenv\ environment is nothing more than a modified \enenv,
+it can be nested in the same way, up to four levels deep.
+
+For what concerns the syntax, it is perfectly in order to nest one
+\beenv\ environment inside another; it is from the viewpoint of the
+resulting visual appearance that this is not recommendable, unless
+quite different bullet styles are used for the two enumerations, so as
+to sharply mark the visual distinction between their respective
+labels. Of course, this problem does not arise if you nest a \beenv\
+environment inside an \enenv, or viceversa.
+
+Examples of such nested environments will be presented in
+Subsection~\ref{SS:NestXmp}.
+
+
+
+\section{Examples}
+
+A few examples follow, illustrating the usage of the \bull\slash\benu\
+packages.
+
+
+
+\subsection{A sample list}
+
+Here we illustrate the use of the \beenv\ environment to produce lists
+whose items are numbered with the \verb|\bullcntr| command.
+
+The lists in the various examples are produced by the following source
+code:
+%
+\begin{verbatim}
+\begin{bullenum}
+\end{verbatim}
+\begin{flushleft}
+\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+
+We shall now show a few variations of a list of the above kind,
+changing the definition of the commands \verb|\counterlargebullet| and
+\verb|\countersmallbullet| among the various examples, so as to
+illustrate the use of several bullet sizes. In three examples out of
+five, however, this will be actually done by means of the declarations
+described in Subsection~\ref{SS:BullStyl}, thus falling back on one of
+the predefined bullet styles.
+
+
+
+\subsubsection{The standard sizes (\command{smartctrbull})}
+\label{SSS:Xmp-Standard}
+
+In our first example, actually, we do not alter the default
+definitions of the two hooks that typeset the bullets (see
+Subsection~\ref{SS:Hooks}). The following is the output the
+\bull\slash\benu\ packages will produce by themselves, if you invoke
+either of them without options and do not alter the default bullet
+style; in any case, it corresponds to the style selected by
+\verb|\smartctrbull|.
+
+\begin{bullenum}
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Standard-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Standard-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ however, that the bullets have shrunk to a smaller size,
+ because the size used so far would have made the bullet
+ cluster look a bit too crowded.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsubsection{Big bullets}
+\label{SSS:Xmp-Big}
+
+You might think that the \verb|\textbullet| character is fitter for
+labelling list items; this is probably true for item numbers that do
+not exceede three, but begins to become questionable for higher
+values. In any case, here is an extreme example: \verb|\textbullets|
+is used for all values from 1 to~9. To achieve this, the following
+source code should be used:
+%
+\begin{verbatim}
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textbullet}
+ \renewcommand*{\countersmallbullet}{\textbullet}
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+This is what we write below.
+
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textbullet}
+ \renewcommand*{\countersmallbullet}{\textbullet}
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item\label{Big-2}
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Big-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Big-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ this time, that the bullets have \emph{not} shrunk to a
+ smaller size, and that the resulting picture looks very
+ crowded---pretty awful, I~would say!
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item\label{Big-9}
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+A cross-reference to an item run into the main text may look really
+bad with bullets thus large: for instance, referencing the second item
+produces~\ref{Big-2} (quite acceptable), referencing the third one
+gives~\ref{Big-3} (just about acceptable), but a reference to the
+sixth item is typeset as~\ref{Big-6}, and the ninth one even
+yields~\ref{Big-9}! Note, however, that lines are not spaced out any
+further than usual.
+
+
+
+\subsubsection{Moderately large bullets (\command{largectrbull})}
+\label{SSS:Xmp-Large}
+
+Our next example illustrates the output produced by the style selected
+with a \verb|\largectrbull| declaration; this style continues to use,
+for the values over~5, the same bullet size adopted for the first five
+values. So, we say
+%
+\begin{verbatim}
+\begin{bullenum}
+ \largectrbull
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+to produce the desired list.
+
+\begin{bullenum}
+ \largectrbull
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Large-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Large-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ once again, that the bullets have \emph{not} shrunk to a
+ smaller size, so that the resulting picture looks pretty
+ crowded, although not intolerably bad-looking. Compare the
+ label of this item with a reference to the corresponding
+ item~\ref{Standard-6} under~\ref{SSS:Xmp-Standard}, and with a
+ reference to the corresponding item~\ref{Big-6}
+ under~\ref{SSS:Xmp-Big}.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsubsection{Small bullets (\command{smallctrbull})}
+\label{SSS:Xmp-Small}
+
+The reciprocal example is to use small bullets throughout, from 1 to~9.
+Thus, we use the following source code:
+%
+\begin{verbatim}
+\begin{bullenum}
+ \smallctrbull
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+And here is the output it yields.
+
+\begin{bullenum}
+ \smallctrbull
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Small-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Small-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ once more, that the bullets have \emph{not} shrunk to a
+ smaller size, because they were \emph{already} small in the
+ items shown thus far.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+Again, compare the references to items \#3 and~\#6 from different
+examples: standard bullets (\ref{Standard-3} and~\ref{Standard-6}),
+big bullets (\ref{Big-3} and~\ref{Big-6}), moderately large bullets
+(\ref{Large-3} and~\ref{Large-6}), small bullets (\ref{Small-3}
+and~\ref{Small-6}).
+
+
+
+\subsubsection{Tiny bullets}
+\label{SSS:Xmp-Tiny}
+
+We come now to another extreme example: the use of
+\verb|\textperiodcentered|. In other words,
+%
+\begin{verbatim}
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+is asserted in order to produce the list.
+
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item
+ Sixth item! Item~\#6! A regular hexagon is used here! Note
+ that it was really impossible, this time, for the bullets to
+ shrunk to a still smaller size than the one that has been
+ adopted in the above items!
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+This bullet style might be employed in a \beenv\ environment nested
+inside another one.
+
+
+
+\subsubsection{St.\texorpdfstring{\,}{ }Valentine (\command{heartctrbull})}
+\label{SSS:Xmp-Hearts}
+
+To end this inventory of variations, let us illustrate the use of a
+fancier ``bullet'': a little heart. We obtain this by saying
+%
+\begin{verbatim}
+\begin{bullenum}
+ \heartctrbull
+\end{verbatim}
+\begin{flushleft}
+ \texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+% ( paren match
+This could be used in valentines to enumerate to your beloved the
+terms of your passion\ldots~:-)
+
+\begin{bullenum}
+ \heartctrbull
+
+ \item\label{Hearts-1}
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single heart. Poor heart! It is a
+ true lonely heart!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two hearts, one on the left and one on
+ the right. Thinking of Romeo and Juliet is absolutely natural
+ in this context\ldots
+
+ \item\label{Hearts-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ hearts neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item\label{Hearts-4}
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ hearts that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item\label{Hearts-5}
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item
+ Sixth item! Item~\#6! A regular hexagon is used here,
+ adorned with hearts! Of course, the hearts do not shrink, as
+ doesn't yours, and as doesn't your ardent passion!
+
+ \item\label{Hearts-7}
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional heart, which makes the
+ figure look more symmetric.
+
+ \item\label{Hearts-8}
+ If 7~was the perfect number of hearts, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~hearts, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The hearts are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+Cross-references are a bit funny with this style; they look like this:
+\ref{Hearts-1}, \ref{Hearts-3}, \ref{Hearts-4}, \ref{Hearts-5},
+\ref{Hearts-7}, and~\ref{Hearts-8}.
+
+
+
+\subsection{Nested enumerations}
+\label{SS:NestXmp}
+
+Try not to overdo this: carrying it to excess could lead to confused
+output.
+
+
+
+\subsubsection{Nesting one \beenv\ inside another}
+\label{SSS:NestBullBull}
+
+We use ``large'' bullets for the outer environment, and ``tiny''
+bullets for the inner one.
+
+\begin{bullenum}
+ \largectrbull
+
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestBull-2}
+ Second item. Here we nest another \beenv\ environment:
+ \begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \item\label{NestBull-2.1}
+ First sub-item.
+ \item\label{NestBull-2.2}
+ Second sub-item.
+ \item\label{NestBull-2.3}
+ Third sub-item.
+ \item\label{NestBull-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Don't forget, we are still inside item~\ref{NestBull-2} of
+ the outer enumeration.
+
+ \item\label{NestBull-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestBull-2}.
+ \begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \item\label{NestBull-3.1}
+ First sub-item.
+ \item\label{NestBull-3.2}
+ Second sub-item.
+ \item\label{NestBull-3.3}
+ Third sub-item.
+ \item\label{NestBull-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Back to item~\ref{NestBull-3} of the outer enumeration.
+\end{bullenum}
+
+Now the bad news: you might want to refer to, say, item
+\ref{NestBull-3.4} under item~\ref{NestBull-3}. As you can see, the
+reference comes out wrong, since the label from the outer enumeration
+% ( paren match
+is typeset with the style of the inner one.~:-(\spacefactor=\sfcode`.
+\space This is a known bug: I\@ decided not to correct it, since doing
+so would require introducing the concept of bullet styles
+distinguished by level, which I\@ deem intolerably burdensome. Be
+aware of this limitation when you nest \beenv\ environments inside one
+another (this does not apply, however, to \beenv's nested within
+\enenv's, as we'll see in the following examples).
+
+
+
+\subsubsection{Nesting \beenv\ inside \enenv}
+\label{SSS:NestBullEnum}
+
+Let us repeat \hyref{SSS:NestBullBull}{the same example shown above},
+but changing the outer environment to \enenv, and suppressing style
+variations.
+
+\begin{enumerate}
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestBuEn-2}
+ Second item. Here we nest a \beenv\ environment:
+ \begin{bullenum}
+ \item\label{NestBuEn-2.1}
+ First sub-item.
+ \item\label{NestBuEn-2.2}
+ Second sub-item.
+ \item\label{NestBuEn-2.3}
+ Third sub-item.
+ \item\label{NestBuEn-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Don't forget, we are still inside item~\ref{NestBuEn-2} of
+ the outer enumeration.
+
+ \item\label{NestBuEn-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestBuEn-2}.
+ \begin{bullenum}
+ \item\label{NestBuEn-3.1}
+ First sub-item.
+ \item\label{NestBuEn-3.2}
+ Second sub-item.
+ \item\label{NestBuEn-3.3}
+ Third sub-item.
+ \item\label{NestBuEn-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Back to item~\ref{NestBuEn-3} of the outer enumeration.
+\end{enumerate}
+
+See Subsection~\ref{SS:CrossXmp} for examples of cross-references to
+the items of these lists.
+
+
+
+\subsubsection{Nesting \enenv\ inside \beenv}
+\label{SSS:NestEnumBull}
+
+As \hyref{SSS:NestBullEnum}{before}, but the other way around: \beenv\
+is now the outer environment, and \enenv\ the inner one.
+
+\begin{bullenum}
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestEnBu-2}
+ Second item. Here we nest an \enenv\ environment:
+ \begin{enumerate}
+ \item\label{NestEnBu-2.1}
+ First sub-item.
+ \item\label{NestEnBu-2.2}
+ Second sub-item.
+ \item\label{NestEnBu-2.3}
+ Third sub-item.
+ \item\label{NestEnBu-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{enumerate}
+ Don't forget, we are still inside item~\ref{NestEnBu-2} of
+ the outer enumeration.
+
+ \item\label{NestEnBu-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestEnBu-2}.
+ \begin{enumerate}
+ \item\label{NestEnBu-3.1}
+ First sub-item.
+ \item\label{NestEnBu-3.2}
+ Second sub-item.
+ \item\label{NestEnBu-3.3}
+ Third sub-item.
+ \item\label{NestEnBu-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{enumerate}
+ Back to item~\ref{NestEnBu-3} of the outer enumeration.
+\end{bullenum}
+
+Again, see Subsection~\ref{SS:CrossXmp} for examples of
+cross-references to the items of the above lists.
+
+
+
+\subsubsection{Deep nesting}
+\label{SSS:DeepNest}
+
+Just to show what the output looks like, here is an example of \enenv\
+and \beenv\ environments nested down to the fourth level. We avoid,
+however, nesting \beenv\ environments one inside the other, because of
+the problem with cross-references outlined
+under~\ref{SSS:NestBullBull}.
+
+\begin{enumerate}
+ \item\label{Invertebrates}
+ Invertebrates are of many kinds.
+
+ \item\label{Vertebrates}
+ We detail the vertebrates.
+ \begin{enumerate}
+ \item\label{Fishes}
+ Fishes. They include, for instance:
+ \begin{bullenum}
+ \item\label{Barracuda} barracuda;
+ \item\label{Carp} carp;
+ \item\label{Swordfish} swordfish.
+ \end{bullenum}
+ \item\label{Amphibians}
+ Amphibians. They include, for instance:
+ \begin{bullenum}
+ \item\label{Frogs} frogs, among which are
+ \begin{enumerate}
+ \item\label{BarkingFrog} the barking frog,
+ \item\label{FlyingFrog} the flying frog,
+ \item\label{GreenFrog} the green frog,
+ \item\label{TreeFrog} the tree frog,
+ \end{enumerate}
+ and may others;
+ \item\label{Toads} toads, that comprise
+ \begin{enumerate}
+ \item\label{CaneToad} the cane toad,
+ \item\label{GiantToad} the giant toad,
+ \end{enumerate}
+ just to name a few;
+ \item\label{Salamanders} salamanders, \emph{e.g.},
+ \begin{enumerate}
+ \item\label{GreenSal} the green salamander,
+ \item\label{SlimySal} the slimy salamander,
+ \item\label{TigerSal} the tiger salamander.
+ \end{enumerate}
+ \end{bullenum}
+ \item\label{Reptiles}
+ Reptiles. Among these we find:
+ \begin{bullenum}
+ \item\label{Snakes} snakes, for instance
+ \begin{enumerate}
+ \item\label{Cobra} cobra,
+ \item\label{Python} python,
+ \item\label{Anaconda} anaconda,
+ \item\label{Viper} viper,
+ \item\label{Rattlesnake} rattlesnake;
+ \end{enumerate}
+ \item\label{Turtles} turtles, of which the following
+ \begin{enumerate}
+ \item\label{GreenTurtle} green turtle,
+ \item\label{PaintedTurtle} painted turtle,
+ \item\label{SnappingTurtle} snapping turtle
+ \end{enumerate}
+ are just a few examples.
+ \end{bullenum}
+ \item\label{Birds}
+ Birds. (I'm a bit bored, now.)
+ \item\label{Mammals}
+ Mammals.
+ \end{enumerate}
+\end{enumerate}
+
+
+
+\subsection{An example of use in the middle of text}
+
+\newcounter{mytest}
+\setcounter{mytest}{3}
+\newlength{\W}
+\setlength{\W}{\bigskipamount}
+
+We have just defined, in the source file of this document, a new
+counter named \cnt{mytest}, and we have set the value of the
+\cnt{mytest} counter to~\arabic{mytest}. With the default bullet
+sizes, this value is displayed by the command \verb|\bullcntr{mytest}|
+as~\bullcntr{mytest}. Other examples:
+
+\begin{tabbing}
+ \indent\verb|\footnotesize \bullcntr{mytest}|\hspace{2\tabbingsep}\=\kill
+ \> \verb|\Huge \bullcntr{mytest}|
+ \' {\Huge produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\huge \bullcntr{mytest}|
+ \' {\huge produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\LARGE \bullcntr{mytest}|
+ \' {\LARGE produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\Large \bullcntr{mytest}|
+ \' {\Large produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\large \bullcntr{mytest}|
+ \' {\large produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\normalsize \bullcntr{mytest}|
+ \' {\normalsize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\small \bullcntr{mytest}|
+ \' {\small produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\footnotesize \bullcntr{mytest}|
+ \' {\footnotesize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\scriptsize \bullcntr{mytest}|
+ \' {\scriptsize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\tiny \bullcntr{mytest}|
+ \' {\tiny produces~\bullcntr{mytest}}
+\end{tabbing}
+
+\setcounter{mytest}{7}
+
+Let us repeat this example after assigning to the \cnt{mytest} counter
+the value~\arabic{mytest}, which \verb|\bullcntr{mytest}| displays
+as~\bullcntr{mytest}:
+
+\begin{tabbing}
+ \indent\verb|\footnotesize \bullcntr{mytest}|\hspace{2\tabbingsep}\=\kill
+ \> \verb|\Huge \bullcntr{mytest}|
+ \' {\Huge produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\huge \bullcntr{mytest}|
+ \' {\huge produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\LARGE \bullcntr{mytest}|
+ \' {\LARGE produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\Large \bullcntr{mytest}|
+ \' {\Large produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\large \bullcntr{mytest}|
+ \' {\large produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\normalsize \bullcntr{mytest}|
+ \' {\normalsize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\small \bullcntr{mytest}|
+ \' {\small produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\footnotesize \bullcntr{mytest}|
+ \' {\footnotesize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\scriptsize \bullcntr{mytest}|
+ \' {\scriptsize produces~\bullcntr{mytest}} \\[\W]
+ \> \verb|\tiny \bullcntr{mytest}|
+ \' {\tiny produces~\bullcntr{mytest} (Ugh!)}
+\end{tabbing}
+
+But look at the output of
+%
+\begin{verbatim}
+\begin{quote}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \tiny
+ The value is~\bullcntr{mytest}.
+\end{quote}
+\end{verbatim}
+%
+Here it is:
+%
+\begin{quote}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \tiny
+ The value is~\bullcntr{mytest}.
+\end{quote}
+%
+% ( paren match
+How cute it looks!~:-)
+
+
+
+\subsection{Examples of cross-references}
+\label{SS:CrossXmp}
+
+Cross-references are printed using the bullet style that was in
+effect when the \verb|\label| command was given. The following
+examples illustrate this.
+
+In~\ref{SSS:Xmp-Standard} we had references to~\ref{Standard-3} and
+to~\ref{Standard-6}. In~\ref{SSS:Xmp-Hearts}, on the other hand, the
+references were to~\ref{Hearts-1}, to~\ref{Hearts-3},
+to~\ref{Hearts-4}, to~\ref{Hearts-5}, to~\ref{Hearts-7}, and
+to~\ref{Hearts-8}.
+
+We turn now to nested lists. We let alone the example
+of~\ref{SSS:NestBullBull}, we already know that references come out
+wrong in this case. In~\ref{SSS:NestBullEnum} we had items
+\ref{NestBuEn-2.1}, \ref{NestBuEn-2.2}, \ref{NestBuEn-2.3}, and
+\ref{NestBuEn-2.4}, all listed under item~\ref{NestBuEn-2}, and
+similarly items \ref{NestBuEn-3.1}, \ref{NestBuEn-3.2},
+\ref{NestBuEn-3.3}, and \ref{NestBuEn-3.4}, as part of
+item~\ref{NestBuEn-3}. In~\ref{SSS:NestEnumBull}, on the other hand,
+we had items \ref{NestEnBu-2.1}, \ref{NestEnBu-2.2},
+\ref{NestEnBu-2.3}, and \ref{NestEnBu-2.4}, all listed under
+item~\ref{NestEnBu-2}: as you can see, the bullets now precede the
+reference to the item of \enenv; similarly, items \ref{NestEnBu-3.1},
+\ref{NestEnBu-3.2}, \ref{NestEnBu-3.3}, and \ref{NestEnBu-3.4} are now
+a part of the ``bulletted'' item~\ref{NestEnBu-3}.
+
+Coming to~\ref{SSS:DeepNest} (the animal kingdom), we see that, for
+instance, the green frog is \ref{GreenFrog}, an example of frog (under
+\ref{Frogs}), which, in turn, is an example of amphibian
+(see~\ref{Amphibians}). On the other hand, the tiger salamander is a
+kind of salamander (cf.~\ref{Salamanders}) listed under
+\ref{TigerSal}.
+
+And so on\ldots
+
+
+
+\setcounter{secnumdepth}{0}
+
+\begin{thebibliography}{9}
+ \providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+ \addcontentsline{toc}{section}{\refname}
+
+ \bibitem{LaTeXbook}
+ L.~Lamport, \emph{\LaTeX---A Document Preparation
+ System---User's Guide and Reference Manual}, 2nd~edition,
+ Addison-Wesley, Reading, 1994.
+
+\end{thebibliography}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
new file mode 100644
index 00000000000..58eedfeb897
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
@@ -0,0 +1,310 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+% "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+% Non-metric paper sizes have no right to exist! (;-)
+\usepackage{bullcntr}
+% Of course, there is no need to load the hyperref package, but we
+% like to use it:
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Using \tbull:\\an example}
+\author{G.~Mezzetti}
+\date{April~2, 2007}
+
+% The following command definitions has nothing to do with the
+% bullcntr package: you may ignore them.
+
+\DeclareRobustCommand*{\command}[1]{%
+ {\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+ {\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{%
+ \texorpdfstring
+ {\mbox{\normalfont \(\langle\textit{#1}\rangle\)}}%
+ {<#1>}%
+}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+% End of command definitions.
+
+% The following is just a neurotic symptom of the author:
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+ This document illustrates, by means of practical examples, the use
+ of \tbull. You should read the \LaTeX\ source of this document
+ and compare it with the output it produces; you may also find it
+ useful as a starting base for your own coding.
+\end{abstract}
+
+\tableofcontents
+
+
+
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+
+If you are reading this document, you will probably know what \tbull\
+is and what purpose it fulfills. In the sequel, we shall assume no
+other knowledge about \tbull\ besides this; in particular, we assume
+that you did not bother reading the documentation, and prefer to learn
+how to use this package by looking at some sample code. We also take
+for granted that you are reading the \LaTeX\ source of this document,
+and comparing it with the output it produces.
+
+Actually, you might quite well avoid reading this document too: the
+typical user of \tbull\ just wishes to produce enumeration lists whose
+items are numbered with bullets, and in order to learn quickly how to
+do this, it suffices to look at the examples contained
+in~\cite{enum-sam}.
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Basic usage}
+
+\newcounter{mycntr}
+
+If you are reading the \LaTeX\ source, you will see that we have just
+defined a new counter named \cnt{mycntr}. We use this counter for
+the examples below.
+
+
+
+\subsection{Using the \command{\Bullcntr} command directly}
+
+Since it has just been defined, the \cnt{mycntr} counter has presently
+the value~\arabic{mycntr}, which \tbull\footnote{More precisely,
+version 0.04\ (2007/04/02), or later, of \tbull: version 0.03
+incorrectly displayed a spurious bullet in this case.} displays
+as~``\bullcntr{mycntr}'', that is, as nothing at all.
+\refstepcounter{mycntr}\label{mycntr-1}After a \verb|\refstepcounter|,
+the value has become~\arabic{mycntr}, which, in ``bulletted'' form, is
+shown as~``\bullcntr{mycntr}''. We may also refer to the
+value~\ref{mycntr-1} on page~\pageref{mycntr-1}: since we have not
+changed the definition of \verb|\themycntr|, the reference is printed
+as shown.
+
+Bear in mind that the \verb|\bullcntr| command works only if the value
+of the counter you want to display lies between 0 and~9 (inclusive);
+otherwise, an error is generated.
+
+
+
+\subsection{Redefining the \command{the}\meta{ctr} command}
+
+\renewcommand*{\themycntr}{\bullcntr{mycntr}}
+
+After redefining \verb|\themycntr|, we may say that the value of the
+\cnt{mycntr} counter is~\themycntr.
+\refstepcounter{mycntr}\label{mycntr-2}As above, after a
+\verb|\refstepcounter|, the value has become~\themycntr, but this time
+a reference is typeset as~``\ref{mycntr-2}'' too (on
+page~\pageref{mycntr-2}, why not).
+
+
+
+\subsection{Changing the bullet style}
+
+\heartctrbull
+
+Now the value of the counter is displayed as~``\themycntr'', but the
+previous reference is still typeset as~``\ref{mycntr-2}''.
+\refstepcounter{mycntr}\label{mycntr-3}You need another
+\verb|\refstepcounter|, issued after changing the style, to get a
+reference to the value~\ref{mycntr-3} on page~\pageref{mycntr-3}.
+This is in no way a bug, but really a feature! (Could it ever be the
+other way around?)
+
+\smartctrbull
+
+We have now reverted to the default style: indeed, the value of the
+counter is displayed as~``\themycntr'', but, of course, the reference
+is still to~\ref{mycntr-3}.
+
+\renewcommand*{\counterlargebullet}{$\scriptstyle \star$}
+
+You are not limited to the provided predefined bullet styles (there
+are four of them): you may pick any character you want---for example,
+a star---and use it in place of the default bullet, as
+in~``\themycntr''; but for this, you should better read the
+documentation\ldots
+
+
+
+\section{Simple enumerations}
+
+It is possible to employ \tbull\ alone to produce lists whose items
+are numbered with bullets, in simple situations, although there is
+little point in doing this, since it is easier to use \tbenu\
+(see~\cite{enum-sam}), which also works in more complex contexts. In
+any case, here are some examples.
+
+% Restore the default bullet style:
+\smartctrbull
+
+
+
+\subsection{The default style}
+
+If you don't alter the bullet style, you will get an enumeration like
+the following:
+
+\begin{enumerate}
+ \renewcommand*{\theenumi}{\bullcntr{enumi}}
+ \renewcommand*{\labelenumi}{\theenumi}
+
+ \item\label{enum-1} One bullet.
+ \item\label{enum-2} Two bullets.
+ \item\label{enum-3} Three bullets.
+ \item\label{enum-4} Four bullets.
+ \item\label{enum-5} Five bullets.
+ \item\label{enum-6} Six bullets. From six bullets onward,
+ the default settings provide that smaller bullets be used to
+ make up the arrangement.
+ \item\label{enum-7} Seven bullets.
+ \item\label{enum-8} And so on\ldots
+\end{enumerate}
+
+The references are to items \ref{enum-1}, \ref{enum-2}, \ref{enum-3},
+\ref{enum-4}, \ref{enum-5}, \ref{enum-6}, \ref{enum-7},
+and~\ref{enum-8}.
+
+
+
+\subsection{Larger bullets}
+
+You might prefer that the bullet size don't shrink when the value~6
+is reached, as in the following example.
+
+\begin{enumerate}
+ \renewcommand*{\theenumi}{\bullcntr{enumi}}
+ \renewcommand*{\labelenumi}{\theenumi}
+ \largectrbull
+
+ \item One bullet.
+ \item Two bullets.
+ \item Three bullets.
+ \item Four bullets.
+ \item Five bullets.
+ \item Six bullets. As you can see, the bullets have not shrunk.
+ \item Seven bullets.
+ \item And so on\ldots
+\end{enumerate}
+
+
+
+\subsection{Smaller bullets}
+
+Another possibility is to use small bullets since the beginning, as in
+the following example.
+
+\begin{enumerate}
+ \renewcommand*{\theenumi}{\bullcntr{enumi}}
+ \renewcommand*{\labelenumi}{\theenumi}
+ \smallctrbull
+
+ \item One bullet. As you can see, the bullet is already small.
+ \item Two bullets.
+ \item Three bullets.
+ \item Four bullets.
+ \item Five bullets.
+ \item Six bullets.
+ \item Seven bullets.
+ \item And so on\ldots
+\end{enumerate}
+
+
+
+\subsection{Hearts}
+
+What the title states.
+
+\begin{enumerate}
+ \renewcommand*{\theenumi}{\bullcntr{enumi}}
+ \renewcommand*{\labelenumi}{\theenumi}
+ \heartctrbull
+
+ \item One heart. The size of the hearts does not change.
+ \item Two hearts.
+ \item Three hearts.
+ \item Four hearts.
+ \item Five hearts.
+ \item Six hearts.
+ \item Seven hearts.
+ \item And so on\ldots
+\end{enumerate}
+
+
+
+\setcounter{secnumdepth}{0}
+\providecommand*\bysame{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+
+\begin{thebibliography}{9}
+ \providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+ \addcontentsline{toc}{section}{\refname}
+
+ \bibitem{dtx}
+ G.~Mezzetti, \emph{The \bull\ package}, documented \TeX\
+ source (dtx), included in every distribution of \tbull\ (in
+ the file \filedir{\Bullcntr.dtx}).
+
+ \bibitem{overview}
+ \bysame, \emph{Overview of \tbull}, included in every
+ distribution of \tbull, surely as \LaTeX\ source (in the file
+ \filedir{\Bullcntr-man.tex}) and perhaps in precompiled PDF
+ format too (in the file \filedir{\Bullcntr-man.pdf}).
+
+ \bibitem{enum-sam}
+ \bysame, \emph{Using \tbenu: an example}, \LaTeX\ source,
+ included in every distribution of \tbull\ (in the file
+ \filedir{\Bullenum-sam.tex}).
+\end{thebibliography}
+
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex b/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
new file mode 100644
index 00000000000..72409e75dd9
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
@@ -0,0 +1,688 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+% "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+% Non-metric paper sizes have no right to exist! (;-)
+\usepackage{bullenum}
+% Of course, there is no need to load the hyperref package, but we
+% like to use it:
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Using \tbenu:\\an example}
+\author{G.~Mezzetti}
+\date{April~2, 2007}
+
+% The following command definitions has nothing to do with the
+% bullcntr package: you may ignore them.
+
+\DeclareRobustCommand*{\command}[1]{%
+ {\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+ {\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{%
+ \texorpdfstring
+ {\mbox{\normalfont \(\langle\textit{#1}\rangle\)}}%
+ {<#1>}%
+}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\env}[1]{\texttt{#1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+\newcommand*{\Enumerat}{enumerate}
+\newcommand*{\beenv}{\env{\Bullenum}}
+\newcommand*{\enenv}{\env{\Enumerat}}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+% End of command definitions.
+
+% The following is just a neurotic symptom of the author:
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+ This document illustrates, by means of practical examples, the use
+ of \tbenu. You should read the \LaTeX\ source of this document
+ and compare it with the output it produces; you may also find it
+ useful as a starting base for your own coding.
+\end{abstract}
+
+\tableofcontents
+
+
+
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+
+If you are reading this document, you will probably know what \tbenu\
+is and what purpose it fulfills. In the sequel, we shall assume no
+other knowledge about \tbenu\ besides this; in particular, we assume
+that you did not bother reading the documentation, and prefer to learn
+how to use this package by looking at some sample code. We also take
+for granted that you are reading the \LaTeX\ source of this document,
+and comparing it with the output it produces.
+
+You might find it useful to read also~\cite{bull-sam}, which contains
+sample code that theaches you how to use \tbull.
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Basic usage}
+
+Here we illustrate the use of the \beenv\ environment to produce lists
+whose items are numbered with the \verb|\bullcntr| command. Different
+``bullet styles'' are obtained by means of some declarations that
+affects the size (or even the shape) of the bullets employed.
+
+
+
+\subsection{The standard sizes (\command{smartctrbull})}
+\label{SS:Xmp-Standard}
+
+In our first example, actually, we do not alter the default bullet
+style, that is, the output \tbenu\ will produce by itself, if you
+invoke it without options and do not declare any style by your own; in
+any case, it corresponds to the style selected by a
+\verb|\smartctrbull| declaration.
+
+\begin{bullenum}
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Standard-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Standard-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ however, that the bullets have shrunk to a smaller size,
+ because the size used so far would have made the bullet
+ cluster look a bit too crowded.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsection{Moderately large bullets (\command{largectrbull})}
+
+Our next example illustrates the output produced by the style selected
+with a \verb|\largectrbull| declaration; this style continues to use,
+for the values over~5, the same bullet size adopted for the first five
+values. So, we say
+
+\begin{bullenum}
+ \largectrbull
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Large-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Large-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ once again, that the bullets have \emph{not} shrunk to a
+ smaller size, so that the resulting picture looks pretty
+ crowded, although not intolerably bad-looking. Compare the
+ label of this item with a reference to the corresponding
+ item~\ref{Standard-6} under~\ref{SS:Xmp-Standard}.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsection{Small bullets (\command{smallctrbull})}
+
+The reciprocal example is to use small bullets throughout, from 1 to~9.
+Thus, we use the following source code:
+
+\begin{bullenum}
+ \smallctrbull
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item\label{Small-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item\label{Small-6}
+ Sixth item! Item~\#6! A regular hexagon is used here! Note,
+ once more, that the bullets have \emph{not} shrunk to a
+ smaller size, because they were \emph{already} small in the
+ items shown thus far.
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+Again, compare the references to items \#3 and~\#6 from different
+examples: standard bullets (\ref{Standard-3} and~\ref{Standard-6}),
+moderately large bullets (\ref{Large-3} and~\ref{Large-6}), small
+bullets (\ref{Small-3} and~\ref{Small-6}).
+
+
+
+\subsection{Tiny bullets}
+
+We come now to a sort of extreme example: the use of
+\verb|\textperiodcentered|. Since there is no predefined declaration
+for this style, it is necessary to manually redefine the two
+``hooks'', \verb|\counterlargebullet| and \verb|\countersmallbullet|,
+that \tbull\ (and therefore, indirectly, also \tbenu) call when they
+want to typeset a bullet.
+
+\begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+
+ \item
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single bullet. Poor bullet! How
+ lonely it must feel!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two bullets, one on the left and one
+ on the right. If you are a romantic nature, you might even
+ think of them as Romeo and Juliet\ldots
+
+ \item
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ bullets neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ bullets that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item
+ Sixth item! Item~\#6! A regular hexagon is used here! Note
+ that it was really impossible, this time, for the bullets to
+ shrunk to a still smaller size than the one that has been
+ adopted in the above items!
+
+ \item
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional bullet, which makes
+ the figure look more symmetric.
+
+ \item
+ If 7~was the perfect number of bullets, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~bullets, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The bullets are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+This bullet style might be employed in a \beenv\ environment nested
+inside another one.
+
+
+
+\subsection{St.\texorpdfstring{\,}{ }Valentine (\command{heartctrbull})}
+\label{SS:Xmp-Hearts}
+
+To end this inventory of variations, let us illustrate the use of a
+fancier ``bullet'': a little heart. We obtain this with a
+\verb|\heartctrbull| declaration.
+
+\begin{bullenum}
+ \heartctrbull
+
+ \item\label{Hearts-1}
+ This is the first item of the list, that is, item~\#1. It is
+ therefore numbered with a single heart. Poor heart! It is a
+ true lonely heart!
+
+ \item
+ This is the second item of the list, that is, item~\#2. It is
+ therefore numbered with two hearts, one on the left and one on
+ the right. Thinking of Romeo and Juliet is absolutely natural
+ in this context\ldots
+
+ \item\label{Hearts-3}
+ This is the third item of the list, that is---guess
+ what?---item~\#3. Not surprisingly, it is numbered with three
+ hearts neatly arranged in the shape of an equilateral
+ triangle.
+
+ \item\label{Hearts-4}
+ This is the fourth item, item~\#4. A square has exactly four
+ vertices, so it seems quite appropriate to lay out the four
+ hearts that must be used to number this item exactly in this
+ form, as you can see in the label.
+
+ \item\label{Hearts-5}
+ If you have not lost the track, you will agree that this is
+ the fifth item of the list. A regular pentagon would probably
+ have been the optimal choice for displaying this value of the
+ counter, but for some reason the arrangement shown in the
+ label of this item has been preferred by the author of \tbull.
+
+ \item
+ Sixth item! Item~\#6! A regular hexagon is used here,
+ adorned with hearts! Of course, the hearts do not shrink, as
+ doesn't yours, and as doesn't your ardent passion!
+
+ \item\label{Hearts-7}
+ In the opinion of the author, the shape used to display the
+ value~7 is even more pleasant than the regular hexagon used
+ for the value~6; indeed, this is a regular hexagon too, but
+ with the center marked by an additional heart, which makes the
+ figure look more symmetric.
+
+ \item\label{Hearts-8}
+ If 7~was the perfect number of hearts, here we face the
+ disruption of this perfection. The solution adopted for
+ arranging 8~hearts, which you can see here, is, in the
+ author's opinion, the less inelegant among all possibilities.
+
+ \item
+ Item~\#9, the last value that the \verb|\bullcntr| command can
+ display. The hearts are just stacked in a $3\times3$ square
+ pattern---the obvious choice!
+\end{bullenum}
+
+% ( paren match
+This could be used in valentines to enumerate to your beloved the
+terms of your passion\ldots~:-)
+
+Cross-references are a bit funny with this style; they look like this:
+\ref{Hearts-1}, \ref{Hearts-3}, \ref{Hearts-4}, \ref{Hearts-5},
+\ref{Hearts-7}, and~\ref{Hearts-8}.
+
+
+
+\section{Nested enumerations}
+
+Try not to overdo this: carrying it to excess could lead to confused
+output.
+
+
+
+\subsection{Nesting one \beenv\ inside another}
+\label{SS:NestBullBull}
+
+We use ``large'' bullets for the outer environment, and ``tiny''
+bullets for the inner one.
+
+\begin{bullenum}
+ \largectrbull
+
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestBull-2}
+ Second item. Here we nest another \beenv\ environment:
+ \begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \item\label{NestBull-2.1}
+ First sub-item.
+ \item\label{NestBull-2.2}
+ Second sub-item.
+ \item\label{NestBull-2.3}
+ Third sub-item.
+ \item\label{NestBull-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Don't forget, we are still inside item~\ref{NestBull-2} of
+ the outer enumeration.
+
+ \item\label{NestBull-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestBull-2}.
+ \begin{bullenum}
+ \renewcommand*{\counterlargebullet}{\textperiodcentered}
+ \renewcommand*{\countersmallbullet}{\textperiodcentered}
+ \item\label{NestBull-3.1}
+ First sub-item.
+ \item\label{NestBull-3.2}
+ Second sub-item.
+ \item\label{NestBull-3.3}
+ Third sub-item.
+ \item\label{NestBull-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Back to item~\ref{NestBull-3} of the outer enumeration.
+\end{bullenum}
+
+Now the bad news: you might want to refer to, say, item
+\ref{NestBull-3.4} under item~\ref{NestBull-3}. As you can see, the
+reference comes out wrong, since the label from the outer enumeration
+% ( paren match
+is typeset with the style of the inner one.~:-(\spacefactor=\sfcode`.
+\space This is a known bug: I\@ decided not to correct it, since doing
+so would require introducing the concept of bullet styles
+distinguished by level, which I\@ deem intolerably burdensome. Be
+aware of this limitation when you nest \beenv\ environments inside one
+another (this does not apply, however, to \beenv's nested within
+\enenv's, as we'll see in the following examples).
+
+
+
+\subsection{Nesting \beenv\ inside \enenv}
+\label{SS:NestBullEnum}
+
+Let us repeat the same example shown above, but changing the outer
+environment to \enenv, and suppressing style variations.
+
+\begin{enumerate}
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestBuEn-2}
+ Second item. Here we nest a \beenv\ environment:
+ \begin{bullenum}
+ \item\label{NestBuEn-2.1}
+ First sub-item.
+ \item\label{NestBuEn-2.2}
+ Second sub-item.
+ \item\label{NestBuEn-2.3}
+ Third sub-item.
+ \item\label{NestBuEn-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Don't forget, we are still inside item~\ref{NestBuEn-2} of
+ the outer enumeration.
+
+ \item\label{NestBuEn-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestBuEn-2}.
+ \begin{bullenum}
+ \item\label{NestBuEn-3.1}
+ First sub-item.
+ \item\label{NestBuEn-3.2}
+ Second sub-item.
+ \item\label{NestBuEn-3.3}
+ Third sub-item.
+ \item\label{NestBuEn-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{bullenum}
+ Back to item~\ref{NestBuEn-3} of the outer enumeration.
+\end{enumerate}
+
+See Subsection~\ref{S:CrossXmp} for examples of cross-references to
+the items of these lists.
+
+
+
+\subsection{Nesting \enenv\ inside \beenv}
+\label{SS:NestEnumBull}
+
+As before, but the other way around: \beenv\ is now the outer
+environment, and \enenv\ the inner one.
+
+\begin{bullenum}
+ \item
+ First item: let this one alone, just to have a term of
+ comparison.
+
+ \item\label{NestEnBu-2}
+ Second item. Here we nest an \enenv\ environment:
+ \begin{enumerate}
+ \item\label{NestEnBu-2.1}
+ First sub-item.
+ \item\label{NestEnBu-2.2}
+ Second sub-item.
+ \item\label{NestEnBu-2.3}
+ Third sub-item.
+ \item\label{NestEnBu-2.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{enumerate}
+ Don't forget, we are still inside item~\ref{NestEnBu-2} of
+ the outer enumeration.
+
+ \item\label{NestEnBu-3}
+ Third item (of the outer enumeration). Let us repeat exactly
+ the same nested enumeration as in item~\ref{NestEnBu-2}.
+ \begin{enumerate}
+ \item\label{NestEnBu-3.1}
+ First sub-item.
+ \item\label{NestEnBu-3.2}
+ Second sub-item.
+ \item\label{NestEnBu-3.3}
+ Third sub-item.
+ \item\label{NestEnBu-3.4}
+ Fourth sub-item. OK, this should suffice.
+ \end{enumerate}
+ Back to item~\ref{NestEnBu-3} of the outer enumeration.
+\end{bullenum}
+
+Again, see Subsection~\ref{S:CrossXmp} for examples of
+cross-references to the items of the above lists.
+
+
+
+\section{Examples of cross-references}
+\label{S:CrossXmp}
+
+Cross-references are printed using the bullet style that was in effect
+when the \verb|\label| command was given. The following examples
+illustrate this.
+
+In~\ref{SS:Xmp-Standard} we had references to~\ref{Standard-3} and
+to~\ref{Standard-6}. In~\ref{SS:Xmp-Hearts}, on the other hand, the
+references were to~\ref{Hearts-1}, to~\ref{Hearts-3},
+to~\ref{Hearts-4}, to~\ref{Hearts-5}, to~\ref{Hearts-7}, and
+to~\ref{Hearts-8}.
+
+We turn now to nested lists. We let alone the example
+of~\ref{SS:NestBullBull}, we already know that references come out
+wrong in this case. In~\ref{SS:NestBullEnum} we had items
+\ref{NestBuEn-2.1}, \ref{NestBuEn-2.2}, \ref{NestBuEn-2.3}, and
+\ref{NestBuEn-2.4}, all listed under item~\ref{NestBuEn-2}, and
+similarly items \ref{NestBuEn-3.1}, \ref{NestBuEn-3.2},
+\ref{NestBuEn-3.3}, and \ref{NestBuEn-3.4}, as part of
+item~\ref{NestBuEn-3}. In~\ref{SS:NestEnumBull}, on the other hand,
+we had items \ref{NestEnBu-2.1}, \ref{NestEnBu-2.2},
+\ref{NestEnBu-2.3}, and \ref{NestEnBu-2.4}, all listed under
+item~\ref{NestEnBu-2}: as you can see, the bullets now precede the
+reference to the item of \enenv; similarly, items \ref{NestEnBu-3.1},
+\ref{NestEnBu-3.2}, \ref{NestEnBu-3.3}, and \ref{NestEnBu-3.4} are now
+a part of the ``bulletted'' item~\ref{NestEnBu-3}.
+
+
+
+\setcounter{secnumdepth}{0}
+
+\begin{thebibliography}{9}
+ \providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+ \addcontentsline{toc}{section}{\refname}
+
+ \bibitem{dtx}
+ G.~Mezzetti, \emph{The \bull\ package}, documented \TeX\
+ source (dtx), included in every distribution of \tbull\ (in
+ the file \filedir{\Bullcntr.dtx}).
+
+ \bibitem{overview}
+ \bysame, \emph{Overview of \tbull}, included in every
+ distribution of \tbull, surely as \LaTeX\ source (in the file
+ \filedir{\Bullcntr-man.tex}) and perhaps in precompiled PDF
+ format too (in the file \filedir{\Bullcntr-man.pdf}).
+
+ \bibitem{bull-sam}
+ \bysame, \emph{Using \tbull: an example}, \LaTeX\ source,
+ included in every distribution of \tbull\ (in the file
+ \filedir{\Bullcntr-sam.tex}).
+\end{thebibliography}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/manifest.txt b/Master/texmf-dist/doc/latex/bullcntr/manifest.txt
new file mode 100644
index 00000000000..bf73548ccf2
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/manifest.txt
@@ -0,0 +1,101 @@
+
+This is file `manifest.txt'.
+
+This file is part of a work named "bullcntr package".
+
+Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+
+The bullcntr package may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+ http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2005/12/01 or later.
+
+The bullcntr package has the LPPL maintenance status
+ "author-maintained".
+
+This file specifies what the bullcntr package consists of; more
+precisely, it explains how the locutions "Work" and "Compiled Work",
+used in the LaTeX Project Public License, are to be interpreted
+in the case of this work.
+
+April 2, 2007 (vers. 0.04)
+
+
+
+MEANING OF THE TERM "Work"
+==========================
+
+In the case of the bullcntr package, the "Work" is the collection of the
+following 7 files:
+
+00readme.txt -- start by reading this file
+manifest.txt -- the file you are reading now
+bullcntr.dtx -- main source file
+bullcntr.ins -- installation script
+bullcntr-man.tex -- LaTeX source of package overview/manual
+bullcntr-sam.tex -- sample code that uses the bullcntr package
+bullenum-sam.tex -- sample code that uses the bullenum package
+
+If you have received the 7 files listed above, you possess an integral copy
+of the bullcntr package.
+
+
+
+MEANING OF THE TERM "Compiled Work"
+===================================
+
+In the case of the bullcntr package, a "Compiled Work" is the collection of:
+
+a) the following 5 files that are also part of the "Work" (see above):
+
+00readme.txt
+manifest.txt
+bullcntr-man.tex
+bullcntr-sam.tex
+bullenum-sam.tex
+
+AND
+b) the following 3 files:
+
+bullcntr.sty -- the bullcntr "executable" package
+bullenum.sty -- the bullenum "executable" package
+bullcntr.dvi -- documentation in DVI format
+
+You may, at your option, substitute (or supplement) the file `bullcntr.dvi'
+with the following one:
+
+bullcntr.pdf -- documentation in PDF format
+
+but at least one among the files `bullcntr.dvi' and `bullcntr.pdf' must be
+included in a "Compiled Work" that you wish to distribute. The file
+`bullcntr.pdf' is obtained by submitting to the program pdflatex the file
+`bullcntr.dtx', following the same steps as those explained in
+`00readme.txt' under the title "How to generate the documentation".
+
+
+
+ANCILLARY FILES
+===============
+
+The package of files distributed through the Comprehensive TeX Archive
+Network (CTAN) includes also the following 2 files:
+
+README -- guide to directory contents
+bullcntr-man.pdf -- package overview/manual in PDF format
+
+These two files are included only for the convenience of the CTAN visitors
+and are _not_ a required part of the bullcntr package (of course you may,
+if you wish, include them in your distribution too).
+
+
+
+COMMENT
+=======
+
+Please remember that, in order to distribute a LPPL-compliant copy of the
+bullcntr package, it suffices to distribute only the 7 files that
+constitute the "Work".
+