doc 5

git-svn-id: svn://tug.org/texlive/trunk@81 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 298 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex3/xor/oxford-trial.tex b/Master/texmf-dist/doc/latex3/xor/oxford-trial.tex
new file mode 100644
index 00000000000..bbeb7ec22b1
--- /dev/null
+++ b/Master/texmf-dist/doc/latex3/xor/oxford-trial.tex
@@ -0,0 +1,298 @@
+% $Id: oxford-trial.tex,v 1.1 2000/08/11 06:58:43 latex3 Exp $
+%
+
+\documentclass{article}
+
+%
+% File to make the trial pages for the talk in Oxford.
+% Run with different numbers to get the floats added to the page (0-8);
+% 9 will give grid layout;
+% 10 requires a corresponding .fpc file.
+
+\typein[\TRIAL]{trial?}
+
+\usepackage{xoutput}
+
+\makeatletter
+\def\doif#1{\relax
+  \ifnum#1>\TRIAL\relax 
+   \expandafter\@gobble \else \expandafter \@firstofone \fi
+}
+\makeatother
+
+
+\savefloatplacements
+\doif{10}{\readfloatplacements}
+
+\usepackage{graphicx}
+
+\DeclareFloatSequenceClass{figure}
+\DeclareFloatSequenceClass{table}
+\DeclareFloatSequenceClass{algorithm}
+
+\DeclareFloatType{figure}
+  {
+   sequence-class-id  = figure,
+   toc-extension      = lof,
+   caption-text       = \figurename,
+   numbered-boolean   = true,
+   numbered-id        = figure,
+   numbered-action    = \arabic{figure},
+   body-decls         = ,
+  }
+
+\DeclareFloatType{table}
+  {
+   sequence-class-id  = table,
+   toc-extension      = lot,
+   caption-text       = \tablename,
+   numbered-boolean   = true,
+   numbered-id        = table,
+   numbered-action    = \arabic{table},
+   body-decls        = ,
+  }
+
+\DeclareFloatType{algorithms}
+  {
+   sequence-class-id  = algorithm,
+   toc-extension      = lot,
+   caption-text       = Algorithm,
+   numbered-boolean   = true,
+   numbered-id        = algorithm,
+   body-decls        = ,
+  }
+
+\DeclareFloatArea   {t11}
+   {
+     class-close-list = ,
+     all-close-list  = {b11},
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {b11}
+   {
+     class-close-list = {t11},
+     all-close-list  = ,
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {t21}
+   {
+     class-close-list = {t11,b11},
+     all-close-list  = {t22},
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {b21}
+   {
+     class-close-list = {t11,b11,t21},
+     all-close-list  = ,
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {t31}
+   {
+     class-close-list = {t11,b11,t21,b21},
+     all-close-list  = {t22},
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {b31}
+   {
+     class-close-list = {t11,b11,t21,b21,t31},
+     all-close-list  = ,
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea   {b22}
+   {
+     class-close-list = {t11,b11,t21},
+     all-close-list  = {b21,b31},
+     max-float-num   = 1,
+   }
+
+
+\DeclareFloatArea{t22}
+   {
+     class-close-list = {t11},
+     all-close-list  = {t21,t31},
+     max-float-num   = 1,
+   }
+
+
+\ShowGridfalse
+
+\topskip=12pt
+
+\DeclareInstance{pagesetup2}{normal}{std}{
+   column-num = 3,
+   column-width = 160pt,
+   column-height = 552pt,
+   float-callout-constraint = column,
+   bottom-float-footnote-constraint=forbidden,
+   flush-bottom-float-footnote-constraint=none,
+   max-float-num =4,
+     float-float-sep     = 15pt,
+     float-text-sep      = 20pt minus 5pt,
+     float-area-sep      = 15pt,
+     float-inline-sep    = 10pt minus 2pt,
+   area-list = {t22,t11,b11,t21,b21,b22,t31,b31},
+   grid-point-sep = 0pt,
+  }
+
+
+% with TRIAL > 8 we do grid layout:
+
+\doif{9}{
+ \parskip=0pt
+ \DeclareInstance{pagesetup2}{normal}{std}{
+   column-num = 3,
+   column-width = 160pt,
+   column-height = 552pt,
+   float-callout-constraint = column,
+   bottom-float-footnote-constraint=forbidden,
+   flush-bottom-float-footnote-constraint=none,
+   max-float-num =4,
+     float-float-sep     = 15pt,
+     float-text-sep      = 20pt minus 5pt,
+     float-area-sep      = 15pt,
+     float-inline-sep    = 10pt minus 2pt,
+   area-list = {t22,t11,b11,t21,b21,b22,t31,b31},
+   grid-point-sep = 12pt,
+  }
+}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Stuff for producing test pages
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\newcount\bc
+
+\newcommand\startpar{\par\global\advance\bc1 [\the\bc] }
+
+
+\newcommand\sample{%
+ Infandum, re\-gi\-na, iu\-b\-es re\-no\-va\-re do\-lo\-rem,
+ Troi\-a\-n\-as ut  op\-es et
+ la\-men\-ta\-bile re\-g\-num cru\-e\-rint Da\-nai;
+ qua\-e\-que ip\-se mis\-er\-ri\-ma vi\-di, et
+ qu\-o\-rum pa\-rs ma\-g\-na fui.}
+
+
+\newcommand\dofigure[1]{%
+  \startpar callout (#1) to a figure.
+  \doif{#1}{\begin{figure}
+    \caption{Belongs to callout (#1)}\label{mylab:fig#1}
+    \ifcase\value{figure}
+    \or
+      \includegraphics[totalheight=4\baselineskip]{escher.eps}
+    \or
+      \includegraphics[totalheight=4\baselineskip]{cat.eps}
+    \or
+      \includegraphics[width=\columnwidth]{europe.eps}
+    \or
+      \includegraphics[angle=90,width=.7\columnwidth]{rahtz18.eps}
+    \or
+      \includegraphics[angle=180,width=.7\columnwidth]{rahtz18.eps}
+    \else
+      \includegraphics[width=.7\columnwidth]{rahtz18.eps}
+    \fi
+    \end{figure}}
+  \sample\footnote{A footnote figure #1}
+  \par
+ }
+
+\newcommand\doalg[1]{\startpar
+  callout (#1) to an algorithm.%
+  \doif{#1}{\begin{algorithms}
+    \caption{Belongs to callout (#1)}
+    $ A \to B \to C $
+%    \includegraphics[totalheight=3\baselineskip,width=\columnwidth]{feynman.eps}
+   \end{algorithms}}\par}
+
+
+\newcommand\dotable[1]{%
+  \startpar
+  callout (#1) to a table.
+  \doif{#1}{\begin{table}
+    \caption{Belongs to callout (#1)}
+    \ifcase\value{table}
+    \or
+      \reflectbox{\includegraphics[width=.8\columnwidth]{theworld.eps}}
+    \else
+      \includegraphics[width=.9\columnwidth]{europe.eps}
+    \fi
+    \end{table}}%
+  \sample\footnote{a footnote table #1}
+  \par
+ }
+
+\newcommand\bb{\startpar \sample\sample\par \sample\sample\sample \par}
+
+
+% where's the interface to spanning floats? :-)
+%
+\newcommand\dospanfigure[1]{%
+  \startpar callout (#1) to a figure.%
+  \doif{4}{\def\SPANCNT{2}%
+    \begin{figure}
+    \includegraphics[width=1.5\columnwidth]{outline2.eps}
+    \caption{Belongs to callout (#1)}
+    \end{figure}\par
+    \def\SPANCNT{}}%
+}
+
+
+\begin{document}
+
+\UseInstance{pagesetup2}{normal}
+
+
+
+
+\startpar callout (1) to a figure.%
+\doif{1}{%
+  \begin{figure}[t21]
+  \reflectbox{\includegraphics[totalheight=4\baselineskip]{cat.eps}}
+  \caption{Forced into t21}
+  \end{figure}}\par
+
+\dofigure2
+\sample
+\doalg3
+
+\dospanfigure{4}
+
+\dofigure5
+
+
+\doalg{6}
+\dotable{7}
+\startpar callout to a here table.%
+\flushfloats[table]
+\begin{table}[h]
+  \includegraphics[width=.8\columnwidth]{europe.eps}
+  \caption{The here table example}
+\end{table}
+
+\bb
+
+\dotable{8}
+
+\bb
+\bb
+\bb
+
+
+\bb
+
+
+THE END % just to make sure we don't lose text
+
+\end{document}