skeyval (16may13)

git-svn-id: svn://tug.org/texlive/trunk@30509 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 0 insertions, 454 deletions

diff --git a/Master/texmf-dist/doc/latex/skeyval/skeyval-testpkg.sty b/Master/texmf-dist/doc/latex/skeyval/skeyval-testpkg.sty
deleted file mode 100644
index d2467bc9f1d..00000000000
--- a/Master/texmf-dist/doc/latex/skeyval/skeyval-testpkg.sty
+++ /dev/null
@@ -1,454 +0,0 @@
-%++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++%
-% This is file 'skeyval-testpkg.sty', version 1.2, 2013/02/10.             %
-%                                                                          %
-% This package and accompanying files may be distributed and/or            %
-% modified under the conditions of the LaTeX Project Public License,       %
-% either version 1.3 of this license or any later version. The latest      %
-% version of this license is in http://www.latex-project.org/lppl.txt      %
-% and version 1.3 or later is part of all distributions of LaTeX           %
-% version 2005/12/01 or later.                                             %
-%                                                                          %
-% The LPPL maintenance status of this software is 'author-maintained'.     %
-%                                                                          %
-% This software is provided 'as it is', without warranty of any kind,      %
-% either expressed or implied, including, but not limited to, the          %
-% implied warranties of merchantability and fitness for a particular       %
-% purpose.                                                                 %
-%                                                                          %
-% The following files constitute the skeyval bundle and must be            %
-% distributed as a whole:                                                  %
-%                                                                          %
-%  readme, skeyval.sty, skeyval-core.tex, skeyval-for.tex,                 %
-%  skeyval-view.sty, skeyval-ltxpatch.sty, skeyval-ltxcmds.tex,            %
-%  skeyval-pstkey.sty, skeyval-pstkey.tex, skeyval-testclass.cls,          %
-%  and skeyval-testpkg.sty.                                                %
-%                                                                          %
-% Copyright (c) 2010-2013 Ahmed Musa (amusa22@gmail.com).                  %
-%++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++%
-
-\ProvidesPackage{skeyval-testpkg}[2013/02/10 v1.2 skeyval test package (AM)]
-\NeedsTeXFormat{LaTeX2e}
-\@ifpackageloaded{skeyval}{}{\RequirePackage{skeyval}}
-\RequirePackage{graphicx}
-
-\skvdisabledkeysmessagetype{warning}
-
-%%++++++++++++++++ Passing options to packages +++++++++++++++++++%%
-
-\skvdeclarebooloption[SKVT]<testpkg>[skvtp@]{verbose}[true]{}
-
-% Declare options with default values that will be used when the options
-% are called without user values.
-%
-\skvdeclarepassedoptionsloadpackage[SKVT]{testpkg}{%
-  hyperref={colorlinks,breaklinks},xcolor=svgnames
-}
-
-%%+++++++++++++++++++ Producing arbitrary texts +++++++++++++++++%%
-
-% The key 'align' could have defined using \skvchoicekey, as in
-% 'shadowbox' family below.
-\newcommand*\justified{}
-\skvordkey[SKVT]{abrtext}{align}[right]{%
-  \skvifcase\skvxifstrcmpTF{#1}
-    {left}{\def\mpfalign{flushleft}}
-    {right}{\def\mpfalign{flushright}}
-    {center}{\def\mpfalign{center}}
-    {justified}{\def\mpfalign{justified}}
-  \elsedo
-    \PackageError{skeyval-testpkg}
-      {Invalid value `#1' for align}
-      {You have issued an illegal value `#1' for option `align'.}%
-  \endif
-}
-
-\skvzcmdkey[SKVT]{abrtext}[mpf]{text style}[\rmfamily]{}
-\skvcmdkey[SKVT]{abrtext}[mpf]{author}[Karl Berry]{}
-\skvzboolkey[SKVT]{abrtext}[mpf]{show author}[true]{}
-
-% Using pointers to expand values of keys while setting keys:
-\def\alignval{right}
-\def\alignvalb{\alignval}
-\def\stextstyle{\sffamily}
-
-\skvsetkeys[SKVT]{abrtext}{
-  align=.expand twice{\alignvalb},
-  text style=.expand once{\stextstyle},author,show author
-}
-
-%%+++++++++++++++++++++++++++ Citations +++++++++++++++++++++++++++%%
-
-% Keys defined by \skvdefinekeys are automatically initialiized when
-% the option 'initialize' is true. In general, to save initialize
-% key values at key definition, you need to call \skvsaveinitialvaluekeys
-% before defining the keys.
-
-\skvsaveinitialvaluekeys[SKVT]{citation}{put frame,width,show author,author,
-  textcolor,fonttype,leftmargin,rightmargin,preskip,framecolor,shadecolor,
-  frame thickness}
-
-\newbox\skv@testbox
-\skvdefinekeys*[SKVT]{citation}[ctt@]{%
-  .cmd/width/\hsize,
-  .zbool/show author/true,
-  .cmd/author//, % empty default
-  .zbool/put frame/true,
-  .cmd/framecolor/black,
-  .cmd/shadecolor/white,
-  .cmd/textcolor/black,
-  .zcmd/frame thickness/.4pt,
-  .cmd/fonttype/\normalfont,
-  .cmd/leftmargin/\leftmargin,
-  .cmd/rightmargin/\rightmargin,
-  .cmd/preskip/0ex,
-  .cmd/width/\textwidth,
-  .ord/dummy key/\@nil,
-}
-% Keys defined by \skvdefinekeys are automatically initialiized when
-% the option 'initialize' is true. When \skvsaveinitialvaluekeys has been
-% called for a set of keys, those keys can be initialized via
-% \skvinitializekeys:
-\skvinitializekeys[SKVT]{citation}[dummy key]
-
-\newcommand\newcitation[2][]{%
-  \skvsetkeys[SKVT]{citation}{#1}%
-  \sbox\skv@testbox{%
-    \ctt@fonttype
-    \textit{\textcolor{\ctt@textcolor}{\ctt@author}}%
-  }%
-  \list{}{%
-    \setlength\leftmargin{\ctt@leftmargin}%
-    \setlength\rightmargin{\ctt@leftmargin}%
-  }%
-  \vspace*{\ctt@preskip}%
-  \item\relax
-  \ifctt@putframe
-    \begingroup
-    \fboxrule\ctt@framethickness\relax
-    \fcolorbox{\ctt@framecolor}{\ctt@shadecolor}{%
-  \fi
-  \parbox{\ctt@width}{%
-    \ctt@fonttype\textcolor{\ctt@textcolor}{\ignorespaces#2}%
-    \ifctt@showauthor
-      \hspace*{\fill}\nolinebreak[1]%
-      \quad\hspace*{\fill}\finalhyphendemerits\z@\relax
-      \usebox\skv@testbox
-    \fi
-  }%
-  \ifctt@putframe}\endgroup\fi
-  \endlist
-  % Restore default values of keys:
-  \skvinitializekeys[SKVT]{citation}[]
-}
-
-
-%%++++++++++++++++++++++++ Shadow boxes ++++++++++++++++++++++%%
-
-\newdimen\shadowspread
-
-\skvdefinekeys*[SKVT]{shadowbox}[shb@]{%
-  .zbool/put frame/true,
-  .bool/shadow/true,
-  .cmd/framecolor/black,
-  .cmd/shadecolor/white,
-  .cmd/shadowcolor/gray!55,
-  .cmd/boxwidth/1.5cm,
-  .ord/framesize/.5pt/\def\currfboxrule{#1},
-  .ord/shadowsize/2pt/\shadowspread=\dimexpr#1\relax,
-  .choice/align/center/{%
-    center.do=\def\curralign##1{\hfil##1\hfil},
-    right.do=\def\curralign##1{\hfill##1},
-    left.do=\def\curralign##1{##1\hfill},
-    justified.do=\let\curralign\@iden
-  }
-}
-
-\skvdefinekeys*[SKVT]{testfam}[shb@]{%
-  .zbool/put shadow/true,% Test zbool
-  .zcmd/shade color/gray!55, % Test .zcmd
-}
-
-\skvdisablekeys[SKVT]{testfam}{put shadow, shade color}
-
-% Presetting and posetting keys.
-%
-% 1. 'Presetting keys' means set the following keys whenever
-%    \setkeys is called. These keys should be set BEFORE the keys
-%    listed in the current argument of \setkeys are set, provided
-%    that these keys aren't listed in the current argument of \setkeys.
-%    If these keys appear in the current argument of \setkeys,
-%    then obviously the user has new values for them or he wants
-%    the keys to be set with their default values.
-%
-% 2. 'Postsetting keys' means set the following keys whenever
-%    \setkeys is called. These keys should be set AFTER the keys
-%    listed in the current argument of \setkeys are set, provided
-%    that these keys aren't listed in the current argument of \setkeys.
-%
-% 3. The command \presetkeys of the xkeyval package expects both
-%    'head' and 'tail'. The skeyval package splits \presetkeys into two,
-%    hopefully less confusing, commands: \skvpresetkeys and
-%    \skvpostsetkeys.
-%
-% 4. There is also command \skvpreposetkeys, which combines
-%    \skvpresetkeys and \skvpostsetkeys. This expects both head and
-%    tail and is equivalent to xkeyval's \presetkeys.
-
-\skvpresetkeys[SKVT]{shadowbox}{%
-  put frame,framecolor=black,framesize=.8pt,boxwidth=1.5cm,align=center,
-  shadecolor=gray!15
-}
-
-\skvpostsetkeys[SKVT]{shadowbox}{%
-  shadow=.use value{put frame},shadowcolor=.use value{framecolor}!40,
-  shadowsize=\dimexpr.use value{framesize}*5\relax
-}
-
-\newcommand*\newshadowbox[2][]{%
-  \skvsetkeys[SKVT]{shadowbox}{#1}%
-  \begingroup
-  \ifshb@putframe
-    \fboxrule=\dimexpr\currfboxrule\relax
-  \else
-    \fboxrule=0pt
-  \fi
-  \ifshb@shadow\else\shadowspread=0pt \fi
-  \sbox\z@{\fcolorbox{\shb@framecolor}{\shb@shadecolor}{%
-    \hb@xt@\shb@boxwidth{\curralign{#2}}%
-  }}%
-  \hskip\shadowspread
-  \color{\shb@shadowcolor}%
-  \rule[-\dp0]{\wd0}{\dimexpr\ht0+\dp0\relax}%
-  \llap{\raisebox{\shadowspread}{\box0\hskip\shadowspread}}%
-  \endgroup
-}
-
-%%++++++++++++++++++++++++ The \directkeys command ++++++++++++++++++++%%
-
-% The following are meant to demonstrate the use of the macro \directkeys:
-
-\ifdefined\skvtestcnt
-  \skvtestcnt\z@
-\else
-  \newcount\skvtestcnt
-\fi
-\def\logsetting{%
-  \advance\skvtestcnt\@ne
-  \typeout{'\skvcurrentkey' set: no.
-    \ifnum\skvtestcnt<10 0\fi\the\skvtestcnt, %
-    path: \skvcurrentprefix/\skvcurrentfamily}%
-}
-
-\directkeys{%
-  % #1 will be the user-value of the handler 'some handler'.
-  .new handlers = {
-    .some handler=\def\x##1{##1*#1},
-    .phantom handler=,
-  },
-  .handler let = {
-    .another handler=.some handler,
-    .do nothing handler=.phantom handler
-  },
-  .kill handlers={
-    .another handler,
-    .do nothing handler
-  },
-  .define handlers={
-    .j handler=\def\x##1{##1*#1},
-    .j handler=\def\y##1{##1*#1},
-  },
-  .define narg handlers={
-    .j1 handler={2}{\def\x##1{##1*#1*#2}},
-    .j2 handler={3}{\def\x##1{##1*#1*#2*#3}}
-  },
-  .new narg handlers={
-    % Error: handler j1 already exists:
-    % .j1 handler={2}{\def\x##1{##1*#1*#2}},
-    .k handler={2}{\def\x##1{##1*#1*#2}},
-    .l handler={3}{\def\x##1{##1*#1*#2*#3}}
-  },
-  .reserve handlers={reservedx , reservedy},
-  .holder prefix = mp@,
-  .prefix = KV,
-  .families = {fam1, fam2},
-  .add family = {fam3},
-  .add families = {fama,famb,famc},
-  .ignore families = {fama,famb,famc},
-  .restore families = {fama,famb},
-  .restore paths = {KVA/fama,KVD/famc},
-%  .ignore keys = {keyb,keyc},
-  .new keys = {
-    .ord/keya/keya-default,
-    .cmd/keyb/keyb-default/\def\x##1{##1#1},
-    .cmd/keyc/keyc-default,
-    .choice*/keyd/center
-      /{  right.do=\def\val@r{#1},
-          left.do=\def\val@l{#1},
-          center.do=\def\val@c{#1}
-        }
-      /\def\yes{value accepted}
-      /\def\no{value rejected},
-    .bool/keye/true/
-      \ifskvindef\else\logsetting\fi
-      \ifmp@keye\def\y##1{##1#1}\fi
-    ,
-    .bool/keyf/true/,
-    .bool/keyg/true/
-  },
-  .push path,
-  .path = KV/fam1,
-  .set keys = {keyd},
-  .pop path,
-  .ignore keys = {keyb,keyc},
-  % Stop processing this list:
-  % .list break,
-  .restore keys = {keyb,keyc},
-  .preset keys  = {keyb,keyc},
-  .postset keys = {keyb,keyc},
-  % Save unknown keys in the default macro \<pref>@<fam>@rmkeys:
-  .save unknown keys = true,
-  .save unknown keys in = \macroa,
-  .set keys = {keya,keyb,keyc,keyd,keye},
-  .set keys = {keya=keya-value,keyb=\def\y####1{####1}},
-  .set keys* = {keya=keya-value,keyf},
-  .set keys* = {keya=keya-value,keyf},
-  .ignore keys = {keyf},
-  .set rmkeys*,
-  % Execute arbitrary code:
-  .exec code=\def\x#1{#1},
-  % Nesting of \directkeys is possible. Pre-entry and post-entry
-  % topologies are independent. At the end of the nest,
-  % prevailing variables of \directkeys revert to their previous
-  % (pre-door) values:
-  \directkeys{
-    .paths = {KVA/fam3,KVB/fam3},
-    .holder prefix = hp@,
-    .define keys = {
-      .cmd/keya/keya-default/\def\x##1{##1#1},
-      .ord/keyb/keyb-default,
-    },
-    .set keys = {keya=vala},
-  },
-  .exec code = \def\keycval{true},
-  % Prepend slot keye to key1 and key2:
-  .prepend slot={key1/{keye=.expanded{\keycval}},key2/{keye=false}},
-  % Multi-prepend slots:
-  .prepend slot={{key3,key4}/{keye=true,keyf=true},key5/{keye=false}},
-  % Prepend slot keyd to key6:
-  .prepend slot={key6/{keyd=right}},
-  % Append slots keye and keyf to key7 and key8.
-  % '.slots' and '.slot' are equivalent to '.append slots'
-  % and '.append slot'.
-  .append slot={key7/{keye=true},key8/{keyf=false}},
-  % The next two link keyb and keyc to key9. #1 here refers to the
-  % current value of key9. The same effect can be achieved directly
-  % via the '.link' handler:
-  .prepend slot={key9/{keyb=#1}},
-  .append slot={key9/{keyc=#1}},
-  .set keys = {key9=val9},
-  % Link keye and keyf to key10 and key11. The values of key10 and
-  % key11 are used to set keye and keyf. key10 and key11 are hence
-  % 'parent keys'.
-  .link = {key10/keye, {key11,key12}/{keyf,keyg}},
-  .set keys = {key10=true},
-  .ignore key = keyf,
-  .save unknown keys in = \macrob,
-  .setkeys = {keya,keyb,keyf},
-  .disable keys = {keye,keyf},
-}
-
-%%++++++++++++++++++++++ Collecting body of environment +++++++++++++++++%%
-
-\skvmakekeys[
-  .prefix=KV,
-  .family=collectbody,
-  .hp=mp,
-  .initialize,
-  .endlinechar=-1
-]{%
-  .cmd/title//,
-  .zcmd/title scale/1,
-  .zcmd/body scale/1,
-  .cmd/width/\textwidth,
-  .zcmd/title text style//,
-  .zcmd/body text style//,
-  .cmd/action//
-}
-
-\newsavebox{\boxbody}
-\newenvironment{collectbody}[1][]{%
-  \skvusekeys[.prefix=KV,.family=collectbody]{#1}%
-  \ifx\mptitle\@empty\else\skvafterfi
-    \begin{center}%
-    \scalebox{\mptitlescale}{\mptitletextstyle\mptitle}%
-    \end{center}%
-  \fi
-  \begin{lrbox}{\boxbody}%
-  \begin{minipage}{\mpwidth}%
-  \mpbodytextstyle\mpaction
-}{%
-  \end{minipage}%
-  \end{lrbox}%
-  \scalebox{\mpbodyscale}{\usebox{\boxbody}}%
-}
-
-
-%%+++++++++++++++++++++ Changing the key parser ++++++++++++++++++++%%
-
-\setupskeyval{key parser={;}}
-\skvafterdefinekeys{\setupskeyval{keyparser={,}}}
-\skvdefinekeys*[SKVT]{example}[exm@]{%
-  .zbool/put frame/true;
-  .cmd/shadecolor/green;
-  .ord/framesize/.5pt/\def\currfboxrule{#1};
-  .choice/align/center/{%
-    center.do=\def\curralign##1{\hfil##1\hfil},
-    right.do=\def\curralign##1{\hfill##1},
-    left.do=\def\curralign##1{##1\hfill},
-    justified.do=\let\curralign\@iden
-  };
-}
-
-%%++++++++++++++++++++++++++ Options section ++++++++++++++++++++++%%
-
-\def\skvtp@unknownoptions{}
-
-\skvunknownoptionhandler[SKVT]<abrtext,shadowbox,citation,testpkg>{%
-  \edef\skvtp@unknownoptions{%
-    \skvtp@unknownoptions\ifx\skvtp@unknownoptions\@empty\else,\fi
-    #3%
-  }%
-  \AtEndDocument{%
-    \ifx\skvtp@unknownoptions\@empty\else
-      \PackageWarningNoLine{skeyval-testpkg}
-        {Unknown keys: \skvtp@unknownoptions}%
-    \fi
-  }%
-}
-\skvexecuteoptions[SKVT]<abrtext>{align=.expanded{\alignval},
-  text style=.expand once{\stextstyle},author,show author
-}
-
-\skvprocessoptions*+[SKVT]<abrtext,shadowbox,citation,testpkg>\relax
-%\skvrestrictedprocessoptions*+[SKVT]<abrtext,shadowbox,citation,testpkg>\relax
-
-\skvcomment
-Here you could also use:
-
-\directkeys{
-  .mega process options*={
-    .prefix=SKVT,
-    .families={abrtext,shadowbox,citation,testpkg},
-  }
-}
-
-or
-
-\directkeys{
-  .prefix=SKVT,
-  .families={abrtext,shadowbox,citation,testpkg},
-  .copy class options and process options in all families,
-}
-\endcomment
-
-\endinput