pkuthss (18jun15)

git-svn-id: svn://tug.org/texlive/trunk@37599 c570f23f-e606-0410-a88d-b1316a301751

12 files changed, 0 insertions, 432 deletions

diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Make.bat b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Make.bat
deleted file mode 100755
index a32a482514d..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Make.bat
+++ /dev/null
@@ -1,40 +0,0 @@
-@echo off

-

-@rem vim:ts=4:sw=4

-@rem

-@rem Copyright (c) 2008-2009 solvethis

-@rem Copyright (c) 2010-2012 Casper Ti. Vector

-@rem Public domain.

-

-set JOBNAME=thesis

-@rem 这个变量的值可以为 latex 或 pdflatex。

-set LATEX=latex

-@rem 如果无法使用 biber，可以改为“bibtex”。

-set BIBTEX=biber -l zh__pinyin

-set DVIPDF=dvipdfmx

-

-if "%LATEX%"=="latex" (set DODVIPDF=%DVIPDF% %JOBNAME%

-) else (set DODVIPDF=echo No need to run %DVIPDF%.)

-if "%1"=="" goto doc

-if "%1"=="doc" goto doc

-if "%1"=="clear" (goto clear) else (goto usage)

-

-:doc

-%LATEX% %JOBNAME%

-%BIBTEX% %JOBNAME%

-%LATEX% %JOBNAME%

-%LATEX% %JOBNAME%

-%DODVIPDF%

-goto end

-

-:clear

-del *.aux *.bbl *.bcf *.blg *.dvi *.lof *.log *.lot *.run.xml *.toc *.out

-del missfont.log chap\*.aux

-goto end

-

-:usage

-echo %0 [doc] [clear]

-goto end

-

-:end

-

diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Makefile b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Makefile
deleted file mode 100644
index 27cd5e3ade5..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-# vim:ts=4:sw=4
-#
-# Copyright (c) 2008-2009 solvethis
-# Copyright (c) 2010-2012 Casper Ti. Vector
-# Public domain.
-
-# 被编译的主文件的文件名，不包括扩展名。
-JOBNAME = thesis
-# 这个变量的值可以为 latex、pdflatex 或 xelatex。
-LATEX = latex
-# 如果无法使用 biber，可以改为“bibtex”。
-BIBTEX = biber -l zh__pinyin
-DVIPDF = dvipdfmx
-
-# 如果用 LaTeX 编译，则使用 dvipdfmx 将 dvi 转成 pdf。
-ifeq ($(LATEX), latex)
-	DODVIPDF = $(DVIPDF) $(JOBNAME)
-endif
-
-# 区分是 Windows 环境还是类 UNIX 环境。
-# 如果是后者，则 GNU make 将可以检测到已经定义 PATH 环境变量。
-ifdef PATH
-	MAKE = make
-	RM = rm -f
-else
-	MAKE = mingw32-make
-	RM = del
-endif
-
-doc:
-	$(LATEX) $(JOBNAME)
-	$(BIBTEX) $(JOBNAME)
-	$(LATEX) $(JOBNAME)
-	$(LATEX) $(JOBNAME)
-	$(DODVIPDF)
-
-clean:
-	$(RM) $(JOBNAME).{aux,bbl,bcf,blg,dvi,lof,log,lot,run.xml,toc,out{,.bak}} \
-		{missfont,texput}.log chap/*.aux
-
-distclean: clean
-	$(RM) $(JOBNAME).pdf
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/abstract.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/abstract.tex
deleted file mode 100644
index 4a40f3e415e..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/abstract.tex
+++ /dev/null
@@ -1,13 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\begin{cabstract}
-	% 中文测试文字。
-	\pkuthssffaq
-\end{cabstract}
-
-\begin{eabstract}
-	Test of the English abstract.
-\end{eabstract}
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/acknowledge.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/acknowledge.tex
deleted file mode 100644
index 3c41379b7e8..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/acknowledge.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\chapter{致谢}
-% 中文测试文字。
-\pkuthssffaq
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/chap1.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/chap1.tex
deleted file mode 100644
index 326698b75c1..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/chap1.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\chapter{章节}
-% 中文测试文字。
-\pkuthssffaq
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/conclusion.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/conclusion.tex
deleted file mode 100644
index 0394566970d..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/conclusion.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\specialchap{结论}
-% 中文测试文字。
-\pkuthssffaq
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/copyright.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/copyright.tex
deleted file mode 100644
index 4b1a7923dcf..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/copyright.tex
+++ /dev/null
@@ -1,44 +0,0 @@
-% vim:ts=4:sw=4
-%
-% Copyright (c) 2008-2009 solvethis
-% Copyright (c) 2010-2015 Casper Ti. Vector
-% All rights reserved.
-%
-% Redistribution and use in source and binary forms, with or without
-% modification, are permitted provided that the following conditions are
-% met:
-%
-% * Redistributions of source code must retain the above copyright notice,
-%   this list of conditions and the following disclaimer.
-% * Redistributions in binary form must reproduce the above copyright
-%   notice, this list of conditions and the following disclaimer in the
-%   documentation and/or other materials provided with the distribution.
-% * Neither the name of Peking University nor the names of its contributors
-%   may be used to endorse or promote products derived from this software
-%   without specific prior written permission.
-%
-% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-% IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-% THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-% PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-% CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-% PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-% PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-% LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-% NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-% SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-\chapter*{版权声明}
-\thispagestyle{empty}
-
-任何收存和保管本论文各种版本的单位和个人，
-未经本论文作者同意，不得将本论文转借他人，
-亦不得随意复制、抄录、拍照或以任何方式传播。
-否则一旦引起有碍作者著作权之问题，将可能承担法律责任。
-
-% 若需排版二维码，请将二维码图片重命名为“barcode”，
-% 转为合适的图片格式，并放在当前目录下，然后去掉下面 3 行的注释。
-%\vfill\noindent
-%\includegraphics[height = 5em]{barcode}
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/encl1.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/encl1.tex
deleted file mode 100644
index a28631e9057..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/encl1.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\chapter{附件}
-% 中文测试文字。
-\pkuthssffaq
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/introduction.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/introduction.tex
deleted file mode 100644
index 5e448d3b897..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/introduction.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-% vim:ts=4:sw=4
-% Copyright (c) 2014 Casper Ti. Vector
-% Public domain.
-
-\specialchap{序言}
-% 中文测试文字。
-\pkuthssffaq
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/originauth.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/originauth.tex
deleted file mode 100644
index a41e5944e3e..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/chap/originauth.tex
+++ /dev/null
@@ -1,86 +0,0 @@
-% vim:ts=4:sw=4
-%
-% Copyright (c) 2008-2009 solvethis
-% Copyright (c) 2010-2015 Casper Ti. Vector
-% All rights reserved.
-%
-% Redistribution and use in source and binary forms, with or without
-% modification, are permitted provided that the following conditions are
-% met:
-%
-% * Redistributions of source code must retain the above copyright notice,
-%   this list of conditions and the following disclaimer.
-% * Redistributions in binary form must reproduce the above copyright
-%   notice, this list of conditions and the following disclaimer in the
-%   documentation and/or other materials provided with the distribution.
-% * Neither the name of Peking University nor the names of its contributors
-%   may be used to endorse or promote products derived from this software
-%   without specific prior written permission.
-%
-% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-% IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-% THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-% PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-% CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-% PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-% PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-% LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-% NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-% SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-% 原创性声明和使用授权说明页不需要装订到论文中，故不显示页码。
-\cleardoublepage\thispagestyle{empty}
-{
-	\vspace*{\fill}\linespread{1.5}\selectfont
-	\centerline{\bfseries\zihao{-2}北京大学学位论文原创性声明和使用授权说明}
-
-	\vskip 4em
-	\centerline{\bfseries\zihao{-3}原创性声明}
-	\vskip 1em
-
-	本人郑重声明：
-	所呈交的学位论文，是本人在导师的指导下，独立进行研究工作所取得的成果。
-	除文中已经注明引用的内容外，
-	本论文不含任何其他个人或集体已经发表或撰写过的作品或成果。
-	对本文的研究做出重要贡献的个人和集体，均已在文中以明确方式标明。
-	本声明的法律结果由本人承担。
-	\vskip 1em
-	\rightline
-	{%
-		论文作者签名：\hspace{5em}%
-		日期：\hspace{2em}年\hspace{2em}月\hspace{2em}日%
-	}
-
-	\vskip 4em
-	\centerline{\bfseries\zihao{-3}学位论文使用授权说明}
-	\centerline{\zihao{5}（必须装订在提交学校图书馆的印刷本）}
-	\vskip 1em
-
-	本人完全了解北京大学关于收集、保存、使用学位论文的规定，即：
-	\begin{itemize}
-		\item 按照学校要求提交学位论文的印刷本和电子版本；
-		\item 学校有权保存学位论文的印刷本和电子版，
-			并提供目录检索与阅览服务，在校园网上提供服务；
-		\item 学校可以采用影印、缩印、数字化或其它复制手段保存论文；
-		\item 因某种特殊原因需要延迟发布学位论文电子版，
-			授权学校在 $\square$\nobreakspace{}一年 / %
-			$\square$\nobreakspace{}两年 / %
-			$\square$\nobreakspace{}三年以后在校园网上全文发布。
-	\end{itemize}
-	\centerline{（保密论文在解密后遵守此规定）}
-	\vskip 1em
-	\rightline
-	{%
-		论文作者签名：\hspace{5em}导师签名：\hspace{5em}%
-		日期：\hspace{2em}年\hspace{2em}月\hspace{2em}日%
-	}
-
-	% 若需排版二维码，请将二维码图片重命名为“barcode”，
-	% 转为合适的图片格式，并放在当前目录下，然后去掉下面 2 行的注释。
-	%\vskip 4em \noindent
-	%\includegraphics[height = 5em]{barcode}
-
-	\vspace*{\fill}\par
-}
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.bib b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.bib
deleted file mode 100644
index c8b9ea2dbef..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.bib
+++ /dev/null
@@ -1,20 +0,0 @@
-% vim:ts=4:sw=4
-
-@article{test-en,
-	author = {Author},
-	title = {Title},
-	type = {J},
-	journal = {Journal},
-	date = {2014-04-01},
-	language = {english},
-}
-
-@article{test-zh,
-	author = {作者},
-	title = {标题},
-	type = {J},
-	journal = {期刊},
-	date = {2014-04-01},
-	language = {chinese},
-}
-
diff --git a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.tex b/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.tex
deleted file mode 100644
index 25826ce5f2e..00000000000
--- a/Master/texmf-dist/doc/latex/pkuthss/example-gbk/thesis.tex
+++ /dev/null
@@ -1,146 +0,0 @@
-% vim:ts=4:sw=4
-%
-% Copyright (c) 2008-2009 solvethis
-% Copyright (c) 2010-2015 Casper Ti. Vector
-% Public domain.
-%
-% 使用前请先仔细阅读 pkuthss 和 biblatex-caspervector 的文档，
-% 特别是其中的 FAQ 部分和用红色强调的部分。
-% 两者可在终端/命令提示符中用
-%   texdoc pkuthss
-%   texdoc biblatex-caspervector
-% 调出。
-
-% 采用了自定义的（包括大小写不同于原文件的）字体文件名，
-% 并改动 ctex.cfg 等配置文件的用户请自行加入 nofonts 选项；
-% 其它用户不用加入 nofonts 选项，加入之后反而会产生错误。
-%
-% 图书馆要求电子版论文的目录必须为黑色，
-% 且某些教务要求打印版论文的文字部分为纯黑色而非灰度打印，
-% 【因此最终打印和提交论文前，请将“colorlinks”改为“nocolorlinks”。】
-\documentclass[GBK, colorlinks]{pkuthss}
-
-% 使用 biblatex 排版参考文献，并规定其格式。
-%
-% 如果无法使用 biber，可以把“backend = biber”改为“backend = bibtex”，
-% 并改用 bibtex 产生参考文献，详见 pkuthss 的文档。
-% 使用 biber 时，请去掉所有的 sorting 选项，否则会出错。
-%
-% 默认按照引用顺序排序（“sorting = none”），详见 biblatex-caspervector 的文档
-% （因为是默认设置所以其实不用写，不过出于完备性的考虑仍然在这里列出）。
-% 若需要按照英文文献在前，中文文献在后排序，请设置“sorting = ecnty”；
-% 若需要按照中文文献在前，英文文献在后排序，请设置“sorting = centy”。
-\usepackage[backend = biber, style = caspervector, gbk, sorting = none]{biblatex}
-% 提供近似于学校所要求的 Times New Roman / Arial 的字体。
-\usepackage[defaultsups]{newtxtext}
-\usepackage{newtxmath}
-% 产生 originauth.tex 里的 \square。
-\usepackage{amssymb}
-
-% 按学校要求设定参考文献列表中的条目之内及之间的距离。
-\setlength{\bibitemsep}{3bp}
-% 对于 linespread 值的计算过程有兴趣的同学可以参考 pkuthss-extra.sty。
-\renewcommand*{\bibfont}{\zihao{5}\linespread{1.27}\selectfont}
-
-% 设定文档的基本信息。
-\pkuthssinfo{
-	cthesisname = {本科生毕业论文}, ethesisname = {Undergraduate Thesis},
-	ctitle = {测试文档}, etitle = {Test Document},
-	cauthor = {某某},
-	eauthor = {Test},
-	studentid = {0123456789},
-	date = {某年某月},
-	school = {某某学院},
-	cmajor = {某某专业}, emajor = {Some Major},
-	direction = {某某方向},
-	cmentor = {某某教授}, ementor = {Prof.\ Somebody},
-	ckeywords = {其一，其二}, ekeywords = {First, Second}
-}
-% 导入参考文献数据库（注意不要省略“.bib”）。
-\addbibresource{thesis.bib}
-
-% 普通用户可删除此段。
-\usepackage{color}
-\def\pkuthssffaq{%
-	\emph{\textcolor{red}{pkuthss 文档模版最常见问题：}}
-
-	在最终打印和提交论文之前，
-	请将 pkuthss 文档类选项中的 %
-	\texttt{colorlinks} 改为 \texttt{nocolorlinks}，
-	因为图书馆要求电子版论文的目录必须为黑色，
-	且某些教务要求打印版论文的文字部分为纯黑色而非灰度打印。
-
-	\texttt{\string\cite}、\texttt{\string\parencite} %
-	和 \texttt{\string\supercite} 三个命令分别产生%
-	未格式化的、带方括号的和上标且带方括号的引用标记：%
-	\cite{test-en}，\parencite{test-zh}、\supercite{test-en, test-zh}。
-
-	若要避免章末空白页，请在调用 pkuthss 文档类时加入 \texttt{openany} 选项。
-
-	如果编译时不出参考文献，
-	请参考 \texttt{texdoc pkuthss}“问题及其解决”一章
-	“其它可能存在的问题”一节中关于 biber 的说明。
-}
-
-\begin{document}
-	% 以下为正文之前的部分，默认不进行章节编号。
-	\frontmatter
-	% 此后到下一 \pagestyle 命令之前不排版页眉或页脚。
-	\pagestyle{empty}
-
-	% 自动生成标题页。
-	\maketitle
-	% 版权声明。
-	\include{chap/copyright}
-
-	% 此后到下一 \pagestyle 命令之前正常排版页眉和页脚。
-	\cleardoublepage
-	\pagestyle{plain}
-	% 重置页码计数器，用大写罗马数字排版此部分页码。
-	\setcounter{page}{0}
-	\pagenumbering{Roman}
-
-	% 中英文摘要。
-	\include{chap/abstract}
-	% 自动生成目录。
-	\tableofcontents
-
-	% 以下为正文部分，默认要进行章节编号。
-	\mainmatter
-	% 序言。
-	\include{chap/introduction}
-	% 各章节。
-	\include{chap/chap1}
-	% 结论。
-	\include{chap/conclusion}
-
-	% 正文中的附录部分。
-	\appendix
-	% 排版参考文献列表。
-	\printbibliography[
-		% 使“参考文献”出现在目录中；如果同时要使参考文献列表参与章节编号，
-		% 可将“bibintoc”改为“bibnumbered”。
-		heading = bibintoc,
-		% 单独设定排序方案。此设定会局部覆盖之前的全局设置。
-		% 注：只有同时使用 2.x 或之后版本的 biblatex 和相应兼容版本的 biber，
-		% 才能对每个 \printbibliography 命令采用不同的排序方案，
-		% 否则只能在导入 biblatex 宏包时就（全局）指定排序方案。
-		% 在这样的情况下，请去掉所有的 sorting 选项，否则可能出错。
-		sorting = ecnty
-	]
-	% 各附录。
-	\include{chap/encl1}
-
-	% 以下为正文之后的部分，默认不进行章节编号。
-	\backmatter
-	% 致谢。
-	\include{chap/acknowledge}
-
-	% 此后不排版页眉或页脚。
-	\cleardoublepage
-	\pagestyle{empty}
-
-	% 原创性声明和使用授权说明。
-	\include{chap/originauth}
-\end{document}
-