new latex package makebarcode (29jul08)

git-svn-id: svn://tug.org/texlive/trunk@9914 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 1338 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/makebarcode/README b/Master/texmf-dist/doc/latex/makebarcode/README
new file mode 100644
index 00000000000..cd60bbdb782
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/makebarcode/README
@@ -0,0 +1,10 @@
+=============================================================================
+Package: makebarcode   Version 1.0                               22 July 2008
+=============================================================================
+
+The package contains macros for printing various 2/5 bar codes and Code 39
+bar codes. The macros do not use fonts but create the bar codes directly
+by vrules. It is therefore possible to vary width to height ratio, ratio
+of thin and thick bars. The package is therefore convenient for printing
+ITF bar codes as well as bar codes for identification labels for HP
+storage media.
diff --git a/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/License.txt b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/License.txt
new file mode 100644
index 00000000000..90e5e3ab797
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/License.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2006-05-20
+
+Copyright 1999 2002-2006 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.pdf b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.pdf
new file mode 100644
index 00000000000..bc11e2a2c10
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.pdf
diff --git a/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.tex b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.tex
new file mode 100644
index 00000000000..98a0faf12ae
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/makebarcode/doc/latex/makebarcode/makebarcode.tex
@@ -0,0 +1,318 @@
+%% $Id: zwpagelayout.tex 214 2008-06-26 23:08:07Z zw $
+\input utf8-t1 % encTeX required
+\documentclass[11pt]{article}
+\usepackage{zwgetfdate}
+\usepackage[footskip=30pt,topmargin=2cm,leftmargin=2cm,rightmargin=4cm,botmargin]{zwpagelayout}
+\usepackage[T1]{fontenc}
+\usepackage{lmodern,array,dcolumn,rotating}
+\usepackage[help,H=3mm,S.6]{makebarcode}
+\usepackage[protrusion=false,expansion=true,stretch=8,shrink=24,step=4]{microtype}
+\makeatletter
+\renewcommand*\l@section{\@dottedtocline{1}{\z@}{1.5em}}
+\makeatother
+\extrarowheight 2pt
+\mubytein 0 % important due to bug in url.sty
+\usepackage[pdftitle=Bar\ Codes, pdfauthor=Zdenek\ Wagner,
+            pdfkeywords={bar code, 2/5, Code39, ITF-6, ITF-14, ITF-16},
+            bookmarks,bookmarksopen,bookmarksopenlevel=2]{hyperref}
+\mubytein 1 \mubyteout 1 \mubytelog 1
+
+\marginparwidth\UserRightMargin
+\advance\marginparwidth -1cm
+\advance\marginparwidth-\marginparsep
+
+\def\mg#1{\ifvmode\leavevmode\fi\marginpar{\texttt{#1}}\ignorespaces}
+\def\cmg#1{\mg{\char`\\#1}}
+\def\omg#1{\ifvmode\leavevmode\fi\marginpar{\raggedright\hspace{0pt}\opt{#1}}\ignorespaces}
+\def\opt#1{\texorpdfstring{\textmd{\textsc{#1}}}{#1}}
+\let\pkg\textsc
+\DeclareRobustCommand\cmd[1]{\texttt{\char`\\#1}}
+\def\ie.{i.\,e.\@}
+\def\eg.{e.\,g.\@}
+\def\true{\bool{true}}
+\def\false{\bool{false}}
+\def\bool#1{\texorpdfstring{\textit{#1}}{#1}}
+\def\is{\unskip\nobreak\space =\penalty200 \space\ignorespaces}
+
+\def\bcd#{\barcode[code=Code39,X=.5mm,ratio=2.25,H=1cm]}
+
+\let\zwcomma\,
+\def\,{\texorpdfstring{\zwcomma}{}}
+
+\begin{document}
+
+\clubpenalty 10000
+\widowpenalty 10000
+\raggedbottom
+
+\title{Bar Codes}
+\author{Zdeněk Wagner\\\url{http://icebearsoft.euweb.cz}}
+\date{Package date: \DateOfPackage{makebarcode}}
+\maketitle
+
+\begin{abstract}\noindent
+The package contains macros for printing various 2/5 bar codes and Code 39
+bar codes. The macros do not use fonts but create the bar codes directly
+by vrules. It is therefore possible to vary width to height ratio, ration
+of thin and thick bars. The package is therefore convenient for printing
+ITF bar codes as well as bar codes for identification labels for HP
+storage media.
+\end{abstract}
+
+\tableofcontents
+
+\section{Introduction}
+The development of the package started due to practical need. Bar code labels for HP storage media
+are quite expensive. However, the bar codes may easily be produced by \TeX. The documentation
+clearly specifies that the bar code is of the Code39 type~[\ref{hpstorage}, \ref{hplabel}]. 
+It may seem that the task is easy.
+
+The common denominator of the 2/5 codes and Code39 is that they are formed of thin and thick bars.
+The ratio of thin and thick bars may vary as well as the width-to-height ratio. It may therefore be
+impossible to use bar code fonts for a particular application. On the other hand a bar code may
+simply be created by rules. This approach was inspired by the \texttt{ean13.tex} file developed by
+Petr Olšák~[\ref{olsak}].
+
+Since the HP documentation does not specify dimensions, it was clear that some experimentation will
+be necessary. The macro should thus be general with dimensions controlled by parameters. It is not
+much work to make the macro really general with bar codes defined in tables. The same macro can
+thus produce several types of barcodes. Moreover, the 2/5 bar codes are simpler and serve therefore
+better to debugging and testing the macro during development.
+
+The structure of the package allows for implementation of other types of the bar codes. Some of
+them will be implemented in the next version.
+
+The bar codes may contain a checksum digit. The macro in this package is able neither to generate
+them nor to check them. It is up to the user to specify the full code.
+
+\section{Usage}\label{usage}
+The package is loaded simply by:
+
+\vb
+\verb;\usepackage[;$\langle$options$\rangle$\verb;]{makebarcode};
+
+\vb\noindent
+The bar code may then be printed by command
+
+\vb
+\verb;\barcode[;$\langle$options$\rangle$\verb;]{;$\langle$code$\rangle$\verb;};
+
+\vb
+Options that ar not given in the \cmd{barcode} command are taken form those specified for the whole
+package or the default values are used. Typically you will specify the most frequently options in
+the \cmd{usepackage} command. Notice that the options in the square brackets of both commands are
+optional. In the extreme case you may wish to print the bar codes of type Code39, module width
+0.5\,mm, ratio of thin and thick bars 2.25 and height 1\,cm. You therefore load the package using
+
+\vb
+\verb;\usepackage[code=Code39,X=.5mm,ratio=2.25,H=1cm]{makebarcode};
+
+\vb\noindent
+and produce the bar codes simply by
+
+\vb
+\verb;\barcode{MAKEBARCODE.STY};\par
+\verb;\barcode{ZDENEK WAGNER};
+
+\vb\noindent
+These commands will produce the following bar codes:
+
+\vb
+\begin{center}
+\bcd{MAKEBARCODE.STY}
+
+\bcd{ZDENEK WAGNER}
+\end{center}
+
+\section{General Options}
+The general options are available both for the \cmd{usepackage} command and for the \cmd{barcode}
+macro. They cannot be used with high-level macros \cmd{ITFbarcode} and \cmd{HPlabel}.
+
+Almost all options have default values and may also be used without specification of a value. This will
+reset the option to the default value. It may be useful if you wish to reset the default in the
+\cmd{barcode} macro.
+
+\omg{help}
+The \opt{help} option can only be used with the \cmd{usepackage} command. It prints the list of the
+supported bar codes to the log file.
+
+\omg{bcorr}
+Some applications require correction of the bar and blank width. The \opt{bcorr} option defines
+dimension that is subtracted from each bar and added to each blank. The default value is 0\,mm.
+
+\section{Low-Level Options}\label{low}
+\omg{code}
+The \opt{code} option select the type of the bar code. The list of valid values will be given
+in later sections. This is the only option that has no default value.
+
+\omg{X}
+Option \opt{X} specifies the module width, \ie. the width of a thin line. Its default value is the
+smallest allowed width 0.19\,mm.
+
+\omg{H}
+The \opt{H} option is the width of the bar code. The default value is calculated dynamically as
+40~times the module width.
+
+\omg{ratio}
+The \opt{ratio} option defines the ratio of thin and thick bars. The default value is~3. Remember
+that some applications require a particular value.
+
+\omg{K}
+The \opt{K} option specifies the width of a bar used in the start/stop characters of the 2/5 Matrix
+bar code as a multiple of the width of the thick bar. It must hold $1.5 \leq \mathrm{K} \leq 4$. The
+default value is~2.
+
+\omg{MtoXratio}
+The characters in most bar codes start and end with a bar so that they must be separated with w
+blank space. The width of the space must be wide at least as the module width but may be larger.
+The width of such a space is defined as a ration to the module width by the \opt{MtoXratio} option.
+Its default value is~1. It will rarely be changed.
+
+\section{Family of 2/5 Bar Codes}
+The package implements the whole family of 2/5 bar codes. Their list is given in table~\ref{25}.
+Remember that the 2/5 Interleaved bar code requires even number of digits. If odd number of digits
+is given, zero is prepended.
+
+\begin{table}[hbt]
+\caption{Samples of 2/5 barcodes, encoded sequence is 0123456789, module width 0,19\,mm, ratio~3,
+height~3\,mm}\label{25}
+\medskip
+\begin{center}
+\begin{tabular}{|r|l|}\hline
+\bfseries Code name & \bfseries Bar code\\\hline
+2/5-Industrial & \barcode[code=2/5-Industrial]{0123456789} \\
+2/5-Inverted& \barcode[code=2/5-Inverted]{0123456789}\\                                                            
+2/5-IATA& \barcode[code=2/5-IATA]{0123456789}\\
+2/5-Matrix& \barcode[code=2/5-Matrix]{0123456789}\\
+2/5-Datalogic& \barcode[code=2/5-Datalogic]{0123456789}\\
+2/5-Interleaved& \barcode[code=2/5-Interleaved]{0123456789}\\
+\hline
+\end{tabular}
+\end{center}
+\end{table}
+
+\section{Code39}
+The package currently supports only the basic version of the Code39 bar code. The sample is given in
+section~\ref{usage}. The full ASCII bar code will be implemented in a later version of the package.
+
+\section{Labels for HP Storage Media}
+\cmg{HPlabel}
+The labels for HP storage media are produced by the \cmd{HPlabel} command. Its parametr is the
+requested code. The code must contain exactly 8~characters. The syntax is fixed but not verified by
+the macro. It is only checked whether the number of charactes is correct. It is required that the
+\pkg{rotating} package is loaded manually. Options described in section~\ref{low} cannot be used as
+an optional argument and are ignored if given in the \cmd{usepackage} command because all
+dimensions are fixed.
+
+The author of the package gives no warranty that the code produced by this macro will be usable. HP
+requires high printing quality saying that laser printers are not good enough for such purpose.
+However, bars on the labels bought from HP were grey, not black. As already written the dimensions
+are not given in the documentation. The dimensions used here were determined by careful measuring a
+bought label. A label printed on an HP laser printer with resolution 600\,dpi was tested on a real
+hardware and it worked.
+
+An example of such a bar code is given in figure~\ref{hp}. The frame
+is not a part of the \cmd{HPlabel} macro output but is displayed here in order to show the real
+size of the label.
+
+\begin{figure}[hbt]
+\begin{center}
+\fboxsep 0mm
+\fbox{\HPlabel{CLNU01L1}}
+\end{center}
+\caption{Example of a label for an HP cleaning casette, code CLNU01L1}\label{hp}
+\end{figure}
+
+\section{ITF-6, ITF-14, And ITF-16 Bar Codes}\label{itf}
+\cmg{ITFbarcode}
+The ITF bar codes are basically 2/5 Interleaved codes with 6, 14 or 16 digits. The last digit is a
+checksum calculated by the same algorithm as for EAN13 bar codes. The macro verifies the number of
+digits supplied, not the checksum. The bar code must be printed in a
+frame. Sometimes only horizontal lines are sufficient. Human readable information is printed below
+the bar code. The author has seen several types of formatting the human readable information on real bar
+codes. The one that seemed most reasonable was therefore chosen.
+
+The bar code is always composed in a \cmd{vbox}. It might be necessary to use \cmd{leavevmode} in
+front of the \cmd{ITFbarcode} macro.
+
+Dimensions of the ITF bar codes are fixed. Options defines in section~\ref{low} are thus ignored,
+only the \opt{bcorr} option is allowed. Properties of the ITF bar codes are selected by a special
+set of options that can be given either as an optional argument to the \cmd{ITFbarcode} macro or in
+the \cmd{usepackage} command.
+
+\omg{frame}
+The \opt{frame} option is boolean, \ie. allowed values are \true\ and \false. The default value is
+\true. It requires prining the bar code inside a frame. An example is shown in
+figure~\ref{itf.frame}.
+
+\begin{figure}[hbt]
+\begin{center}
+\leavevmode\ITFbarcode{15412345678908}
+\end{center}
+\caption{ITF-14 bar code with a frame}\label{itf.frame}
+\end{figure}
+
+\omg{lines}
+The \opt{lines} option is complementary to the \opt{frame} options. Its default value is therefore
+\false. It requires printing the bar code within lines as shown in figure~\ref{itf.lines}.
+
+\begin{figure}[hbt]
+\begin{center}
+\leavevmode\ITFbarcode[lines]{15412345678908}
+\end{center}
+\caption{ITF-14 bar code with lines}\label{itf.lines}
+\end{figure}
+
+\omg{S.6}\omg{S.7}\omg{S.8}\omg{S.9}\omg{S1}\omg{S1.1}\omg{S1.2}
+Size of the ITF bar code can be selected from the list of predefined options. The names of these
+options are derived from the values of the scaling factors. By choosing the size options the
+low-level options \opt{X} and \opt{H} are set to proper values. Option \opt{ratio} is always~2.5
+and \opt{MtoXratio} is~1. Option \opt{code} is \texttt{2/5-Interleaved}. The framed form requires a
+blank area in front of and after the bar code (inside the frame). All dimensions are given in
+table~\ref{itfdim}. If no size option is given, \opt{S1} is the default. Human readable information
+is always typeset with the OCR-B font at 12\,pt.
+
+\begin{table}[hbt]
+\caption{Dimensions of the ITF bar codes (in milimeters)}\label{itfdim}
+\medskip
+\begin{center}
+\newcolumntype{N}{D{.}{.}{3}}
+\newcolumntype{M}{D{.}{.}{1}}
+\newcommand*\R[1]{\multicolumn{1}{r}{\bfseries #1}}
+\newcommand*\RR[1]{\multicolumn{1}{r|}{\bfseries #1}}
+\begin{tabular}{|lNNMM|}\hline
+\bfseries Option & \R{Scale} & \R{Module} & \R{Blank area} & \RR{Height}\\ \hline
+S1.2& 1.2 &  1.219 & 13.1 & 38.2 \\
+S1.1& 1.1 &  1.118 & 12.0 & 35.0 \\
+S1  & 1.0 &  1.016 & 10.9 & 31.8 \\
+S.9 & 0.9 &  0.914 &  9.8 & 28.7 \\
+S.8 & 0.8 &  0.813 &  8.7 & 25.4 \\
+S.7 & 0.7 &  0.711 &  7.1 & 22.3 \\
+S.6 & 0.625& 0.635 &  6.4 & 19.8 \\
+\hline
+\end{tabular}
+\end{center}
+\end{table}
+
+                                                                                                                   
+\section{License}
+The package can be used and distributed according to the LaTeX Project Public License version~1.3
+or later the
+text of which can be found at the \texttt{License.txt} file in the \texttt{doc} directory or at
+\url{http://www.latex-project.org/lppl.txt}
+                                                                                                                   
+\section{References}
+\begin{enumerate}\itemsep 0mm \parsep 0mm
+\item Storage Media from HP. \url{http://www.hp.com/go/storagemedia}\label{hpstorage}
+\item HP Bar Code Label Packs.
+\url{http://h18006.www1.hp.com/storage/tapestorage/storagemedia/bar\_code\_label.html}\label{hplabel}
+\item Petr Olšák: The EAN barcodes by \TeX. TUGboat 15 (December 1994), No. 4, pp.~459--464.
+\url{http://www.tug.org/TUGboat/Articles/tb15-4/tb45olsa.pdf}\label{olsak}
+ 
+\item Adriana Benadiková, Stefan Mada and Stanislav
+Weinlich: \textit{Čárové kódy, automatická iden\-ti\-fi\-kace (Barcodes, the Automatic
+Identification)}.
+Grada 1994, 272 pp., ISBN \hbox{80-85623-66-8}.
+\end{enumerate}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/makebarcode/tex/latex/makebarcode/makebarcode.sty b/Master/texmf-dist/doc/latex/makebarcode/tex/latex/makebarcode/makebarcode.sty
new file mode 100644
index 00000000000..c75c87d8e6a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/makebarcode/tex/latex/makebarcode/makebarcode.sty
@@ -0,0 +1,594 @@
+\ProvidesPackage{makebarcode}[2008/07/27 Make various bar codes]
+\PackageInfo{makebarcode}{$Id: makebarcode.sty 224 2008-07-26 23:07:27Z zw $\@gobble}
+
+\RequirePackage{kvoptions}
+\SetupKeyvalOptions{family=zwbc,prefix=zwbc@}
+
+\DeclareStringOption[.19mm]{X}[.19mm]
+\DeclareStringOption[\ZWbc@Hdefault]{H}[\ZWbc@Hdefault]
+\DeclareStringOption[0mm]{bcorr}[0mm]
+\DeclareStringOption[3]{ratio}[3]
+\DeclareStringOption[2]{K} % for 2/5 Matrix, should be in <1.5; 4>
+\DeclareStringOption[1]{MtoXratio}[1]
+\DeclareStringOption{code}
+\DeclareBoolOption{help}
+
+% For ITF codes
+% \ZWbc@ITFdefine X R H
+\def\ZWbc@ITFdefine #1 #2 #3 {\@tempdima #1mm \multiply\@tempdima 5 \divide\@tempdima 2
+  \expandafter\def\expandafter\ZWbc@r\expandafter{\the\@tempdima}%
+  \def\ZWbc@R{#2mm}\def\ZWbc@ITF{X=#1mm,H=#3mm,ratio=2.5,MtoXratio=1,code=2/5-Interleaved}}
+
+\DeclareVoidOption{S1.2}{\ZWbc@ITFdefine 1.219 13.1 38.2 }
+\DeclareVoidOption{S1.1}{\ZWbc@ITFdefine 1.118 12.0 35.0 }
+\DeclareVoidOption{S1}{\ZWbc@ITFdefine   1.016 10.9 31.8 }
+\DeclareVoidOption{S.9}{\ZWbc@ITFdefine  0.914  9.8 28.7 }
+\DeclareVoidOption{S.8}{\ZWbc@ITFdefine  0.813  8.7 25.4 }
+\DeclareVoidOption{S.7}{\ZWbc@ITFdefine  0.711  7.1 22.3 }
+\DeclareVoidOption{S.6}{\ZWbc@ITFdefine  0.635  6.4 19.8 }
+
+\DeclareBoolOption{lines}
+\DeclareComplementaryOption{frame}{lines}
+
+\ZWbc@ITFdefine 1.016 10.9 31.8 
+
+\ProcessKeyvalOptions*
+
+% List all bar code names at the end of the package
+\ifzwbc@help
+  \AtEndOfPackage{\PackageInfo{makebarcode}{\ZWbc@codeList\@gobble}}
+\fi
+
+% Disable help at the end of the package
+\AtEndOfPackage{\DisableKeyvalOption[action=warning,package=makebarcode]{zwbc}{help}}
+
+% Interleave two strings, use as \ZWbc@interleave#1/#2*, result goes to \ZWbc@CHAR
+\def\ZWbc@interleave{\def\ZWbc@CHAR{}\ZWbc@dointerleave}
+\def\ZWbc@dointerleave#1#2/#3*{%
+    \expandafter\def\expandafter\ZWbc@CHAR\expandafter{\ZWbc@CHAR #1}%
+    \ifcat_#3_%
+      \def\next{}%
+    \else
+      \def\next{\ZWbc@dointerleave#3/#2*}%
+    \fi \next}
+
+% Temp counter
+\newcount\ZWbc@ctr
+
+% Make the table: \ZWbc@mktable name code code code @
+% The code has the form key|value, if the key is empty, the table is
+% automatically numbered
+
+\def\ZWbc@mktable #1 {\ZWbc@ctr\z@
+    \def\ZWbc@name{#1}\futurelet\next\ZWbc@tblcode}
+
+\def\ZWbc@tblcode{\if\next\zw@sp \def\next{\ZWbc@xsp:}\else
+    \if\next @\let\next\@gobble\else \let\next\ZWbc@mkcode \fi \fi \next}
+
+\def\ZWbc@mkcode #1|#2 {%
+    \ifcat_#1_%
+      \edef\ZWbc@key{\number\ZWbc@ctr}\advance\ZWbc@ctr\@ne
+    \else
+      \def\ZWbc@key{#1}%
+    \fi
+    \expandafter\gdef\csname ZWbc@tbl_\ZWbc@name_\ZWbc@key\endcsname{#2}%
+    \ZWbc@nextcode}
+
+\futurelet\zw@sp{ }
+\def\ZWbc@xsp: {\ZWbc@nextcode}
+\def\ZWbc@nextcode{\futurelet\next\ZWbc@tblcode}
+
+{\catcode`\_12 \lccode`_=32 \lowercase{\gdef\ZWbc@inactspace{_}}}
+
+% Make alias: \ZWbc@alias tblname existing_key new_key
+
+\def\ZWbc@alias #1 #2 #3 {\expandafter\expandafter\expandafter
+    \let\expandafter\csname ZWbc@tbl_#1_#3\expandafter\endcsname
+                    \csname ZWbc@tbl_#1_#2\endcsname}
+
+% This macro contains the current bar code name for error messages
+
+\def\ZWbc@currentbarcodename{Unknown}
+
+% This macro performs table lookup. It returns the coresponding character(s). If the
+% character(s) cannot be found in the table, the starred version returns the input
+% character(s) while the standard version emits an error message and returns \ZWbc@.
+% The result will be stored in \ZWbc@CHAR.
+
+\def\ZWbc@lookup{\@ifstar\ZWbc@slookup\ZWbc@nlookup}
+\def\ZWbc@slookup{\ZWbc@dolookup*}
+\def\ZWbc@nlookup{\ZWbc@dolookup!}
+
+\def\ZWbc@dolookup#1#2#3{% switchchar # table_name # character(s)
+    \def\ZWbc@key{ZWbc@tbl_#2_#3}%
+    \expandafter\ifx\csname\ZWbc@key\endcsname\relax
+      \if*#1 #3\else
+        \PackageError{makebarcode}{%
+           Character(s) `#3' not allowed in \ZWbc@currentbarcodename.}%
+          {You want to print `#3' in the bar code \ZWbc@currentbarcodename\MessageBreak
+           but it is not defined in the code table. If you proceed,\MessageBreak
+           it will be ignored and the resulting bar code will be wrong.}%
+        \let\ZWbc@CHAR\ZWbc@
+      \else
+        \def\ZWbc@CHAR{#3}%
+      \fi
+    \else
+      \edef\ZWbc@CHAR{\csname\ZWbc@key\endcsname}%
+    \fi}
+
+% Make \ZWbc@ unexpandable
+\let\ZWbc@\relax
+
+% Dimensions
+
+\newdimen\ZWbc@dimX
+\newdimen\ZWbc@dimH
+\newdimen\ZWbc@dimB
+\newdimen\ZWbc@dim@
+
+% Make a bar or blank of a specified width
+
+\def\ZWbc@bar#1{\ZWbc@dim@#1\advance\ZWbc@dim@ -\ZWbc@dimB
+    \vrule height \ZWbc@dimH depth \z@ width \ZWbc@dim@}
+
+\def\ZWbc@blank#1{\ZWbc@dim@#1\advance\ZWbc@dim@ \ZWbc@dimB
+    \kern \ZWbc@dim@}
+
+% Make an element, bar or blank
+
+\def\ZWbc@element{\ifx\ZWbc@prevelem\ZWbc@blank
+    \let\ZWbc@prevelem\ZWbc@bar \else
+    \let\ZWbc@prevelem\ZWbc@blank \fi \ZWbc@prevelem}
+
+% Set required width to \@tempdima, two algorithms used
+
+\def\ZWbc@widenarrow#1{%
+    \if 0#1%
+      \@tempdima=\ZWbc@dimX
+    \else
+      \@tempdima=\zwbc@ratio\ZWbc@dimX
+      \if K#1%
+        \@tempdima=\zwbc@K\@tempdima
+      \fi
+    \fi}
+
+\def\ZWbc@propwidth#1{\@tempdima=#1\ZWbc@dimX}
+
+% Make a character, width algorithm given as the first token
+% bar specification is delimited by @
+
+\def\ZWbc@character#1{\let\ZWbc@alg#1\let\ZWbc@prevelem\ZWbc@blank
+    \ZWbc@printchar}
+
+\def\ZWbc@printchar#1#2@{\ZWbc@alg#1\ZWbc@element{\@tempdima}%
+    \ifcat_#2_\let\next\ZWbc@endchar\else
+    \def\next{\ZWbc@printchar#2@}\fi \next}
+
+\def\ZWbc@endchar{\ifx\ZWbc@prevelem\ZWbc@bar \ZWbc@blank{\zwbc@MtoXratio\ZWbc@dimX}\fi}
+
+% Make a barcode
+
+\DeclareRobustCommand\barcode{\begingroup \catcode`\-12 \catcode`\"12 \ZWbc@barcode}
+\newcommand*\ZWbc@barcode[1][]{\ifcat$#1$ \else \setkeys{zwbc}{#1}\fi
+  \let\ZWbc@mkbarcode\endgroup
+  \ifcat$\zwbc@code$
+    \PackageError{makebarcode}{%
+       No barcode type specified.}%
+      {You have not specified the type of the barcode. If you proceed,\MessageBreak
+       the argument will be displayed as a normal text.}%
+  \else
+    \edef\ZWbc@currentbarcodename{\zwbc@code}%
+    \edef\ZWbc@@@{ZWbc@code_\ZWbc@currentbarcodename}%
+    \expandafter\ifx\csname\ZWbc@@@\endcsname\relax
+      \PackageError{makebarcode}{%
+         Unknown barcode type \ZWbc@currentbarcodename}%
+        {You have requested barcode type \ZWbc@currentbarcodename which is not\MessageBreak
+         implemented in this package. If you proceed, the argument\MessageBreak
+         will be displayed as a normal text.}%
+    \else
+      \expandafter\let\expandafter\ZWbc@mkbarcode\csname\ZWbc@@@\endcsname\ZWbc@setdims
+    \fi
+  \fi \ZWbc@mkbarcode}
+
+\def\ZWbc@def#1{\ZWbc@addTo{\MessageBreak #1}\expandafter\def\csname ZWbc@code_#1\endcsname}
+
+\def\ZWbc@addTo#1{\expandafter\def\expandafter\ZWbc@codeList\expandafter{\ZWbc@codeList #1}}
+\def\ZWbc@codeList{List of supported bar codes:}
+
+% Set dimensions
+
+\def\ZWbc@setdims{%
+    \ZWbc@dimX=\zwbc@X
+    \ZWbc@dimH=\zwbc@H
+    \ZWbc@dimB=\zwbc@bcorr}
+
+\def\ZWbc@Hdefault{40\ZWbc@dimX}
+
+% Sanitization
+
+\def\BarcodeSanitize{\@sanitize \catcode`\\0 }
+
+% End barcode printing
+
+\def\ZWbc@endbarcode{%
+  \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@stop @\unkern
+  \endgroup}
+
+% Table for 2/5 codes
+
+\ZWbc@mktable 2/5
+     0|00110
+     1|10001
+     2|01001
+     3|11000
+     4|00101
+     5|10100
+     6|01100
+     7|00011
+     8|10010
+     9|01010
+     @
+
+% 2/5 Start/Stop characters
+
+\ZWbc@mktable 2/5startstop
+     Start|110
+     Stop|101
+     IATAstart|00
+     IATAstop|10
+     InterleavedStart|000
+     InterleavedStop|100
+     MatrixStart|K0000
+     @
+
+\ZWbc@alias 2/5startstop MatrixStart MatrixStop
+\ZWbc@alias 2/5startstop InterleavedStart DatalogicStart
+\ZWbc@alias 2/5startstop InterleavedStop DatalogicStop
+
+% 2/5 Industrial
+
+\ZWbc@def{2/5-Industrial}{%
+  \ZWbc@lookup{2/5startstop}{Start}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR/00*%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{Stop}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR/00*%
+  \edef\ZWbc@stop{\ZWbc@CHAR}\ZWbc@init@twofive}
+
+% 2/5 IATA
+
+\ZWbc@def{2/5-IATA}{%
+  \ZWbc@lookup{2/5startstop}{IATAstart}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR/0*%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{IATAstop}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR/0*%
+  \edef\ZWbc@stop{\ZWbc@CHAR}\ZWbc@init@twofive}
+
+% 2/5 Matrix
+
+\ZWbc@def{2/5-Matrix}{%
+  \ZWbc@lookup{2/5startstop}{MatrixStart}%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{MatrixStop}%
+  \edef\ZWbc@stop{\ZWbc@CHAR}\ZWbc@compacttrue\ZWbc@init@twofive}
+
+% 2/5 Datalogic
+
+\ZWbc@def{2/5-Datalogic}{%
+  \ZWbc@lookup{2/5startstop}{DatalogicStart}%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{DatalogicStop}%
+  \edef\ZWbc@stop{\ZWbc@CHAR}\ZWbc@compacttrue\ZWbc@init@twofive}
+
+% 2/5 Inverted
+
+\ZWbc@def{2/5-Inverted}{%
+  \ZWbc@lookup{2/5startstop}{Start}%
+  \edef\ZWbc@CHAR{000/\ZWbc@CHAR*}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{Stop}%
+  \edef\ZWbc@CHAR{0000/\ZWbc@CHAR*}%
+  \expandafter\ZWbc@interleave\ZWbc@CHAR
+  \edef\ZWbc@stop{\ZWbc@CHAR}\ZWbc@invertedtrue\ZWbc@init@twofive}
+
+% 2/5-Interleaved
+
+\ZWbc@def{2/5-Interleaved}{%
+  \ZWbc@lookup{2/5startstop}{InterleavedStart}%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \ZWbc@lookup{2/5startstop}{InterleavedStop}%
+  \edef\ZWbc@stop{\ZWbc@CHAR}\begingroup \BarcodeSanitize \ZWbc@count@twofive}
+
+% Optionally prepend leading zero
+\def\ZWbc@count@twofive#1{\endgroup
+  \edef\ZWbc@string{#1}\expandafter\ZWbc@nextchar\ZWbc@string*}
+
+\def\ZWbc@nextchar#1#2*{\ZWbc@flip
+  \ifcat_#2_%
+    \let\next\ZWbc@int@leading
+  \else
+    \def\next{\ZWbc@nextchar#2*}%
+  \fi \next}
+
+\def\ZWbc@int@leading{\ifZWbc@compact \edef\ZWbc@string{0\ZWbc@string}\fi
+  \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@start @%
+  \expandafter\ZWbc@int@twofive\ZWbc@string*}
+
+\def\ZWbc@int@twofive#1#2#3*{%
+  \ZWbc@lookup{2/5}{#1}%
+  \ifx\ZWbc@CHAR\ZWbc@ \else
+    \edef\ZWbc@temp{\ZWbc@CHAR}%
+    \ZWbc@lookup{2/5}{#2}%
+    \ifx\ZWbc@CHAR\ZWbc@ \else
+      \edef\ZWbc@temp{\ZWbc@temp/\ZWbc@CHAR*}%
+      \expandafter\ZWbc@interleave\ZWbc@temp
+      \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@CHAR @%
+    \fi
+  \fi
+  \ifcat_#3_\let\next\ZWbc@endbarcode\else
+  \def\next{\ZWbc@int@twofive#3*}\fi \next}
+
+\def\ZWbc@flip{\ifZWbc@compact \ZWbc@compactfalse \else \ZWbc@compacttrue \fi}
+
+% Common 2/5 commands
+
+\newif\ifZWbc@compact
+\newif\ifZWbc@inverted
+
+\def\ZWbc@init@twofive{\begingroup \BarcodeSanitize \ZWbc@twofive}
+
+\def\ZWbc@twofive#1{\endgroup \edef\ZWbc@string{#1}%
+  \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@start @%
+  \expandafter\ZWbc@dotwofive\ZWbc@string*}
+
+\def\ZWbc@dotwofive#1#2*{%
+  \ZWbc@lookup{2/5}{#1}%
+  \ifx\ZWbc@CHAR\ZWbc@ \else
+    \ifZWbc@compact \else
+      \ifZWbc@inverted
+        \edef\ZWbc@CHAR{00000/\ZWbc@CHAR*}%
+        \expandafter\ZWbc@interleave\ZWbc@CHAR
+      \else
+        \expandafter\ZWbc@interleave\ZWbc@CHAR/0000*%
+      \fi
+    \fi
+    \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@CHAR @%
+  \fi
+  \ifcat_#2_\let\next\ZWbc@endbarcode\else
+  \def\next{\ZWbc@dotwofive#2*}\fi \next}
+
+% Table for 39 codes (** is a start/stop character, not 2 stars)
+
+\ZWbc@mktable 39
+     |000110100
+     |100100001
+     |001100001
+     |101100000
+     |000110001
+     |100110000
+     |001110000
+     |000100101
+     |100100100
+     |001100100
+     |100001001
+     |001001001
+     |101001000
+     |000011001
+     |100011000
+     |001011000
+     |000001101
+     |100001100
+     |001001100
+     |000011100
+     |100000011
+     |001000011
+     |101000010
+     |000010011
+     |100010010
+     |001010010
+     |000000111
+     |100000110
+     |001000110
+     |000010110
+     |110000001
+     |011000001
+     |111000000
+     |010010001
+     |110010000
+     |011010000
+     |010000101
+     |110000100
+     |011000100
+     |010101000
+     |010100010
+     |010001010
+     |000101010
+     |010010100
+     @
+
+{\catcode`\$ 12 \catcode`\%12
+\ZWbc@mktable 39num
+     0|0
+     1|1
+     2|2
+     3|3
+     4|4
+     5|5
+     6|6
+     7|7
+     8|8
+     9|9
+     A|10
+     B|11
+     C|12
+     D|13
+     E|14
+     F|15
+     G|16
+     H|17
+     I|18
+     J|19
+     K|20
+     L|21
+     M|22
+     N|23
+     O|24
+     P|25
+     Q|26
+     R|27
+     S|28
+     T|29
+     U|30
+     V|31
+     W|32
+     X|33
+     Y|34
+     Z|35
+     -|36
+     .|37
+     { }|38
+     $|39
+     /|40
+     +|41
+     %|42
+     **|43
+     @
+}
+
+% Code39
+
+\ZWbc@def{Code39}{%
+  \ZWbc@lookup{39num}{**}%
+  \ZWbc@lookup{39}{\ZWbc@CHAR}%
+  \edef\ZWbc@start{\ZWbc@CHAR}%
+  \let\ZWbc@stop\ZWbc@start
+  \ZWbc@init@threenine}
+
+\def\ZWbc@init@threenine{\begingroup \BarcodeSanitize \ZWbc@threenine}
+
+\def\ZWbc@threenine#1{\endgroup \edef\ZWbc@string{#1}%
+  \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@start @%
+  \expandafter\ZWbc@dothreenine\ZWbc@string*}
+
+\def\ZWbc@dothreenine#1#2*{%
+  \ZWbc@lookup{39num}{#1}%
+  \ifx\ZWbc@CHAR\ZWbc@ \else
+    \ZWbc@lookup{39}{\ZWbc@CHAR}%
+    \expandafter\ZWbc@character\expandafter\ZWbc@widenarrow\ZWbc@CHAR @%
+  \fi
+  \ifcat_#2_\let\next\ZWbc@endbarcode\else
+  \def\next{\ZWbc@dothreenine#2*}\fi \next}
+
+% HPlabel, requires rotating, must be loaded separatelly
+% see http://www.hp.com/go/storagemedia
+
+\def\HPlabel{\begingroup \BarcodeSanitize \ZWbc@HPlabel}
+\ZWbc@addTo{\MessageBreak\string\HPlabel\space (using Code39)}
+
+\def\ZWbc@HPlabel#1{\endgroup \edef\ZWbc@hpstring{#1}%
+  \vbox to 16.5mm{\hsize 78mm \parindent\z@ \parskip\z@ \lineskiplimit\z@ \lineskip.9mm
+    \usefont{OT1}{phv}{m}{n}\leftskip 5.5mm \rightskip\leftskip
+    \noindent \barcode[code=Code39,X=.42mm,ratio=3,H=6.3mm,bcorr=0mm]{#1}\par
+    \setbox\ZWbc@hpbox=\hbox
+       {\begin{turn}{180}\barcode[code=Code39,X=.23mm,ratio=3,H=6.5mm,bcorr=0mm]{#1}\end{turn}}
+    \noindent \raise\dp\ZWbc@hpbox\box\ZWbc@hpbox \hfill
+    \begin{sideways}\vbox{\hsize 6.5mm \fontsize{10}{11}\selectfont
+      \leftskip\z@ \rightskip\z@ \centering
+      \expandafter\ZWbc@mkHPlabel\ZWbc@hpstring\ZWbc@}\end{sideways}\par
+  \vss
+  \centering \fontsize{6}{6}\selectfont
+  This edge of the label toward hub of tape\par}}
+
+\def\ZWbc@mkHPlabel#1#2#3#4#5#6#7#8#9\ZWbc@{%
+  \ifcat_#8_\ZWbc@HPtoofew\fi
+  \ifcat_#9_\else\ZWbc@HPtoomany\fi
+  #1\par#2\par#3\par#4\par#5\par#6\par#7#8\par}
+
+\newbox\ZWbc@hpbox
+
+\def\ZWbc@HPtoomany{\ZWbc@HPerror{many}}
+\def\ZWbc@HPtoofew{\ZWbc@HPerror{few}}
+\def\ZWbc@HPerror#1{\PackageError{makebarcode}%
+  {Too #1 characters supplied in HP label code \ZWbc@hpstring}%
+  {The label code must contain exactly 8 characters.\MessageBreak
+   Your label will be unusable.}}
+
+% ITF-6/14/16
+
+\def\ITFbarcode{\begingroup \BarcodeSanitize \ZWbc@ITFbarcode}
+\ZWbc@addTo{\MessageBreak\string\ITFbarcode\space (ITF-6/14/16)}
+
+\newbox\ZWbc@ITFbox
+\newdimen\ZWbc@ITFwidth
+\newtoks\ZWbc@ITFtoks
+
+\newcommand*\ZWbc@ITFbarcode[2][]{\ifcat$#1$\else \setkeys{zwbc}{#1}\fi
+  \vbox{\hbox{\vbox{%
+    \ifzwbc@lines
+      \hrule height \ZWbc@r
+    \else
+      \hrule height 4.8mm
+    \fi
+    \setbox\ZWbc@ITFbox=\hbox{%
+      \ifzwbc@lines
+        \hskip\ZWbc@r
+      \else
+        \vrule width 4.8mm \hskip\ZWbc@R
+      \fi
+      \relax
+      \expandafter\barcode\expandafter[\ZWbc@ITF]{#2}%
+      \ifzwbc@lines
+        \hskip\ZWbc@r
+      \else
+        \hskip\ZWbc@R \vrule width 4.8mm
+      \fi}%
+    \global\ZWbc@ITFwidth\wd\ZWbc@ITFbox \box\ZWbc@ITFbox
+    \ifzwbc@lines
+      \hrule height \ZWbc@r
+    \else
+      \hrule height 4.8mm
+    \fi}}%
+    \vskip\ZWbc@r
+    \ZWbc@startITFdigits #2\ZWbc@
+    \font\ocrb ocrb10 at 14.4pt
+    \hbox to \ZWbc@ITFwidth{\hskip\@tempdima \ocrb \the\ZWbc@ITFtoks\hskip\@tempdima}%
+  }%
+  \endgroup}
+
+
+\def\ZWbc@startITFdigits#1{\ZWbc@ctr\@ne
+  \@tempdima\ZWbc@r \multiply\@tempdima 2
+  \ifzwbc@lines
+    \advance\@tempdima\ZWbc@r
+  \else
+    \advance\@tempdima\ZWbc@R
+    \advance\@tempdima 4.8mm
+  \fi
+  \ZWbc@ITFtoks{#1}\ZWbc@ITFdigits}
+
+\def\ZWbc@ITFdigits#1#2\ZWbc@{%
+  \ZWbc@ITFtoks\expandafter{\the\ZWbc@ITFtoks\hfill #1}%
+  \advance\ZWbc@ctr\@ne
+  \ifcat$#2$%
+    \let\next\ZWbc@endITFdigits
+  \else
+    \def\next{\ZWbc@ITFdigits#2\ZWbc@}%
+  \fi \next}
+
+\def\ZWbc@endITFdigits{%
+  \ifnum\ZWbc@ctr=6 \else
+    \ifnum\ZWbc@ctr=14 \else
+      \ifnum\ZWbc@ctr=16 \else
+        \PackageError{makebarcode}%
+          {Wrong number of digits for ITF-6/14/16}%
+          {Only ITF-6, ITF-14, ITF-16 are allowed.\MessageBreak
+           You must supply corresponding number of digits.\MessageBreak
+           This bar code will be unusable.}%
+      \fi
+    \fi
+  \fi}
+
+% Test macro (to be removed)
+\def\ZWBCtest #1 {\csname ZWbc@#1\endcsname}