hackthefootline (17jan18)

git-svn-id: svn://tug.org/texlive/trunk@46356 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 549 insertions, 326 deletions

diff --git a/Master/texmf-dist/doc/latex/hackthefootline/README.md b/Master/texmf-dist/doc/latex/hackthefootline/README.md
index 12a04ec2b32..5ca0a825fcc 100644
--- a/Master/texmf-dist/doc/latex/hackthefootline/README.md
+++ b/Master/texmf-dist/doc/latex/hackthefootline/README.md
@@ -1,6 +1,17 @@
 # hackthefootline
-Version 2017/08/04
+## Arbitrary footline selection for LaTeX beamer's standard themes.
 
-Provides arbitrary footline selection for LaTeX beamer's standard themes.
+Some `beamer` themes provide footlines -- and some do not.  
+Now, if one wants to have a footline, he is restricted to the (outer) themes providing them or loads multiple themes. On top of that, these provided footlines are only configurable by redefining them as a whole, which is quite uncomfortable and yields many lines of additional code.
 
+`hackthefootline` is a package taking over, defining and redefining different footlines, so they can be configured using key-value syntax. Also, it is possible (but *not* recommended) to switch between different footline types during a presentation.
+
+
+
+### Dependencies
+`hackthefootline` depends on the `pgfkeys` package and -- obviously -- on the `beamer` class.  
+
+Additional sophisticated features included also require `appendixnumberbeamer`, `etoolbox`, `calc` and `numprint`, but these four dependencies can be resolved by passing some options to the `hackthefootline` package.
+
+### License
 This work is licensed under the LPPL 1.3c or any later version.
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.pdf b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.pdf
new file mode 100644
index 00000000000..6fe185b639a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.pdf
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.tex b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.tex
new file mode 100644
index 00000000000..14f5ed168f5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-doc.tex
@@ -0,0 +1,435 @@
+%%	This is file 'hackthefootline-doc.tex', Version 2018-01-16
+%%	Copyright 2017 Sebastian Friedl <sfr682k@t-online.de>
+%% 
+%%	This work may be distributed and/or modified under the conditions of the LaTeX Project
+%%	Public License, either version 1.3c of this license or (at your option) any later version.
+%%	The latest version of this license is available at
+%%		http://www.latex-project.org/lppl.txt
+%%	and version 1.3c or later is part of all distributions of LaTeX version 2008-05-04 or later
+%%
+%%	This work has the LPPL maintenace status 'maintained'.
+%%	The current maintainer of this work is Sebastian Friedl.
+%%
+%%	This work consists of the files hackthefootline.sty, hackthefootline-examples.tex and
+%%	hackthefootline-doc.tex
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	The hackthefootline package is a tool providing arbitrary footline selection and
+%%	configuration for LaTeX beamer's standard themes (other themes may also work, of course)
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	Please report bugs and other problems as well as suggestions for improvements
+%%	to my email address (sfr682k@t-online.de).
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	Acknowledgement:
+%%	The basic layout of the two- and three-column footline is based on the original LaTeX
+%%	beamer split and infolines outer themes written by Till Tantau.
+%%
+%%	-------------------------------------------------------------------------------------------
+
+% !TeX spellcheck = en_GB
+
+% !TeX document-id = {681db40e-7a84-4428-b4f4-84e230e3ba79}
+% !TeX program=lualatex
+% !TeX TXS-program:compile=txs:///lualatex/[--shell-escape]
+
+
+\documentclass[11pt]{ltxdoc}
+
+\usepackage[erewhon]{newtxmath}
+\usepackage[no-math]{fontspec}
+\usepackage{polyglossia}
+\setdefaultlanguage{english}
+
+\usepackage{csquotes}
+\usepackage{hologo}
+\usepackage[pdfborder={0 0 0}, unicode]{hyperref}
+\usepackage[english]{selnolig}
+\usepackage{tikz}
+
+\newcommand{\DescribeOption}[3]{
+  \DescribeMacro{#1}
+  \begin{minipage}[t]{\textwidth}
+    \textit{\textbf{#2}}\dotfill~\par
+    \begingroup
+    \vspace{0.5em}#3\par
+    \endgroup
+  \end{minipage}%
+  \bigskip\medskip%
+}
+
+
+\parindent 0pt
+
+\setmainfont{erewhon}
+\setsansfont[Scale=MatchLowercase]{Source Sans Pro}
+\setmonofont[Scale=MatchLowercase]{Hack}
+
+\usepackage[left=4.50cm,right=2.75cm,top=3.25cm,bottom=2.75cm,nohead]{geometry}
+
+\hyphenation{coun-ted}
+\MakeShortVerb{"}
+
+
+\title{The \texttt{\bfseries hackthefootline} package \\ {\large\url{https://github.com/SFr682k/hackthefootline}}}
+\author{Sebastian Friedl \\ \href{mailto:sfr682k@t-online.de}{\ttfamily sfr682k@t-online.de}}
+\date{2018/01/16}
+
+\hypersetup{pdftitle={The hackthefootline package},pdfauthor={Sebastian Friedl}}
+
+\begin{document}
+	\maketitle
+	\thispagestyle{empty}
+	
+	\begin{center} \itshape
+		Dedicated to all the \LaTeX\ beamer users \dots
+		
+		\medskip
+		\dots who load two different themes in the same presentation \\ or redefine commands to obtain the desired footline \dots
+		
+		\medskip
+		\dots and the other guys just using "\setbeamertemplate"
+	\end{center}
+	
+	\medskip
+	\begin{abstract}
+		\noindent%
+		\textbf{Arbitrary footline selection and configuration for \LaTeX\ \texttt{beamer}'s standard themes.}
+		"hackthefootline" is a package taking over, defining and redefining different footlines, so they can be configured using key-value syntax.
+	\end{abstract}
+	
+	
+	\tableofcontents
+	
+	\clearpage
+	
+	
+	
+	\subsection*{Dependencies and other requirements}
+	\addcontentsline{toc}{subsection}{Dependencies and other requirements}
+	%
+	\DescribeMacro{beamer}
+	Since "hackthefootline" is designed to modify "beamer"'s footlines, it is incompatible to any other document class. Therefore, load this package only in "beamer" documents!
+	
+	\medskip
+	\DescribeMacro{pgfkeys}
+	"hackthefootline" heavily depends on the "pgfkeys" package for handling the whole key-value stuff.
+	
+	\bigskip
+	Also, additional sophisticated features require the following packages:
+	
+	\medskip
+	\DescribeMacro{appendixnumber-}\DescribeMacro{beamer}
+	The "appendixnumberbeamer" package implements a simple solution for appendix frames not being calculated into the total number of frames
+	
+	\medskip
+	\DescribeMacro{etoolbox}
+	Provides access on \hologo{eTeX} primitives
+	
+	\medskip
+	\DescribeMacro{calc}
+	Required for basic calculations
+
+	\medskip
+	\DescribeMacro{numprint}
+	Prints out numbers, counters and lengths
+	
+	\bigskip
+	However, the four latter dependencies can be removed by using some package options. See section \ref{behavioropts} for further details.
+	
+	
+	\subsection*{License}
+	\addcontentsline{toc}{subsection}{License}
+	\textcopyright\ 2017 Sebastian Friedl
+	
+	\smallskip
+	This work may be distributed and/or modified under the conditions of the \LaTeX\ Project Public License, either version 1.3c of this license or (at your option) any later version.
+	
+	\smallskip
+	The latest version of this license is available at \url{http://www.latex-project.org/lppl.txt} and version 1.3c or later is part of all distributions of \LaTeX\ version 2008-05-04 or later.
+	
+	\smallskip
+	This work has the LPPL maintenace status \enquote*{maintained}. The current maintainer of this work is Sebastian Friedl. \\
+	This work consists of the following files:
+	\begin{itemize} \itemsep 0pt
+		\item "hackthefootline.sty"
+		\item "hackthefootline-examples.tex" and
+		\item "hackthefootline-doc.tex"
+	\end{itemize}
+	
+	
+	\subsection*{Acknowledgement}
+	\addcontentsline{toc}{subsection}{Acknowledgement}
+	The basic layout of the two-- and three--column footline is based on the original \LaTeX\ beamer split and infolines outer themes written by Till Tantau.
+	
+	
+	\subsection*{Notice: Behavior inside the presentation's appendix}
+	\addcontentsline{toc}{subsection}{Notice: Behavior inside the presentation's appendix}
+	By default, this package \emph{does not count appendix frames} into the total number of frames and resets the counter for frame numbers to 1 as soon as the "\appendix" command is used. Also, frame numbers won't be displayed on footlines inside the appendix.
+	
+	\medskip
+	This behavior can be suppressed by passing the \texttt{countappendixframes} option.
+	
+	
+	
+	\clearpage
+	
+
+
+
+	% DOCUMENTATION PART ------------------------------------------------------------------------------------------------------------------------
+
+	\section{Using the package}
+	The "\usepackage[<Options>]{hackthefootline}" command loads the package\footnote{To do so, the package has to be installed in a location where \LaTeX\ is able to find it}. A list of all available options can be found in section \ref{packageoptions}.
+	
+	\medskip
+	\textbf{Important note:} You \emph{have} to pass the \emph{footline's number of columns} as an option to the package (available: "onecol", "twocols" or "threecols"). If you don't do so, the footline gets removed completely. \\
+	See section \ref{examples-setup} for some examples.
+	
+	
+	
+	\section{Package options} \label{packageoptions}
+	\subsection{Options influencing the footline's configuration}
+	These options determine the number of columns being used for the footline. \\
+	You \emph{have} to pass one of these options when loading "hackthefootline"; otherwise the footline will be removed completely.
+	
+	\medskip
+	\DescribeMacro{onecol}
+	The \enquote{initial footline hack} produces a one--column footline
+	
+	\medskip
+	\DescribeMacro{twocols}
+	The \enquote{initial footline hack} produces a two--column footline
+	
+	\medskip
+	\DescribeMacro{threecols}
+	The \enquote{initial footline hack} produces a three--column footline
+	
+	\subsection{Options influencing the package's behavior} \label{behavioropts}
+	These options can be passed to disable additional features and remove dependencies on other packages.
+	
+	\medskip
+	\DescribeMacro{countappendix-}\DescribeMacro{frames}
+	If the "countappendixframes" option is passed to the package, appendix frames are counted into the total number of frames. \\
+	\textit{Removes the following dependencies:} "appendixnumberbeamer", "etoolbox"
+	
+	\medskip
+	\DescribeMacro{nofun}
+	Doesn't support frame numbers being shown as \enquote{percent of presentation} \\
+	\textit{Removes the following dependencies:} "calc", "numprint"
+
+
+
+	\section{Configuring the footline}
+	The internal mechanisms of "hackthefootline" are using templates for displaying the provided information.
+	Each template is available in different styles, which can be switched using the provided key value syntax:
+	
+	\medskip
+	\DescribeMacro{\htfconfig}
+	Use "\htfconfig{key1=value1, key2=value2, …}" to modify the current configuration of the footline. Changes apply instantly. \\
+	See section \ref{examples-switchtemplates} for examples.
+	
+	\bigskip
+	All available keys and values are listed below being depicted as follows:
+	
+	\medskip
+	\DescribeOption{key}{possible values}{Description of the values' effects}
+	
+	\medskip
+	\textbf{Annotations:}
+	\begin{itemize}
+		\item
+			The default values of the keys depend on the number of columns chosen when loading the package. See section \ref{defaultconfig} for further details.
+		\item
+			\textit{Templates not visible} in the default configuration have been hidden by setting the value of the according key to "none". Apply another value to this key and the template will show up. \\
+			\textit{Templates visible} in the default configuration can be hidden by setting the value of the according key to "none" (there's only one exception: "atsep"). \\
+			See section \ref{examples-switchtemplates} for examples.
+	\end{itemize}
+	
+	\bigskip
+	\DescribeOption{cols}{one, two, three, none}{%
+		The number of colums used for the footline:
+		\begin{description}\itemsep0pt
+			\item[one]
+				Use a footline consisting of a single column
+			\item[two]
+				Use a footline consisting of two columns
+			\item[three]
+				Use a footline consisting of three columns
+			\item[none]
+				Remove the footline completely
+		\end{description}
+		This key is provided although it is \emph{not} recommended to change its value within a document.
+		When initializing "hackthefootline" using a column option and switching to the "none" style, there will be a whitespace \enquote{reserved} for the footline left. \\
+		The other way round, when initializing "hackthefootline" without a column option and switching to a footline, the footline will be cut off at half of its height.
+	}
+	
+	\DescribeOption{title}{short, long, none}{%
+		Sets the title type displayed in the footline:
+		\begin{description}\itemsep0pt
+			\item[short]
+				Show the short title given in the square braces of the \texttt{\textbackslash title} command. \\
+				When no short title is given, the long title will be used.
+			\item[long]
+				Show the long title given in the curly braces of the \texttt{\textbackslash title} command.
+			\item[none]
+				Don't show any title inside the footline
+		\end{description}}
+	
+	\DescribeOption{authinst}{onlyauthor, onlyinst, instpths, authpths, both, none}{%
+		Influences the way author and institute are displayed:
+		\begin{description}\itemsep0pt
+			\item[onlyauthor]
+				Show only the author's name
+			\item[onlyinst]
+				Show only the institute's name
+			\item[instpths]
+				Show both, author and institute, but put the institute into parentheses
+			\item[authpths]
+				Show both, author and institute, but put the author into parentheses
+			\item[both]
+				Show both and separate them using a comma
+			\item[none]
+				Show neither author, nor institute
+		\end{description}
+		All templates use the values specified for short author / short institute.
+	}
+	
+	\DescribeOption{date}{short, long, none}{%
+		The date displayed in the footline:
+		\begin{description}\itemsep0pt
+			\item[short]
+				Show the short date
+			\item[long]
+				Show the long date
+			\item[none]
+				Do not show any date
+		\end{description}}
+	
+	\DescribeOption{framenrs}{counter, fraction, percent, none}{%
+		Controls the type of frame number shown in the footline:
+		\begin{description}\itemsep0pt
+			\item[counter]
+				Only show the number of the current frame
+			\item[fraction]
+				Show the number of the current frame as well as the total number of frames
+			\item[percent]
+				Display the current progress of the presentation displayed as a percent value \\
+				When setting this value, make sure that you didn't pass the "nofun" option when loading the package, otherwise an error message will be thrown.
+			\item[none]
+				Do not show frame numbers
+		\end{description}}
+	
+	\DescribeOption{atsep}{colon, comma, space}{%
+		Sets the character used to separate author and title when using the "onecol" footline:
+		\begin{description}\itemsep0pt
+			\item[colon]
+				Use a colon as separator
+			\item[comma]
+				Use a comma as separator
+			\item[space]
+				Use a space as separator
+		\end{description}}
+	
+	
+	
+	\section{Default configurations} \label{defaultconfig}% TODO: Real pictures
+	Depending on the selected number of columns, the default configuration of the footlines is as follows:
+	
+	\subsection*{One--column footline}
+	"\htfconfig{%" \\
+	"    title=short, authinst=both," \\
+	"    date=none, framenrs=fraction, atsep=colon}" \\[\smallskipamount]
+	\includegraphics[page=1,width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\subsection*{Two--column footline}
+	"\htfconfig{%" \\
+	"    title=short, authinst=onlyauthor," \\
+	"    date=none, framenrs=none}" \\[\smallskipamount]
+	\includegraphics[page=2,width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\subsection*{Three-column footline}
+	"\htfconfig{%" \\
+	"    title=short, authinst=instpths," \\
+	"    date=short, framenrs=fraction}" \\[\smallskipamount]
+	\includegraphics[page=3,width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+
+
+
+	% TODO: rewrite, more examples from "real" beamer documents
+	\section{Examples}
+	\subsection{Setting up \texttt{hackthefootline}}\label{examples-setup}
+	\paragraph{Example 1:}
+	"\usepackage[onecol]{hackthefootline}" \\
+	\textit{Effect:} A one-column footline \\
+	\includegraphics[page=1, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	
+	\paragraph{Example 2:}
+	"\usepackage[twocols]{hackthefootline}" \\
+	\textit{Effect:} A two-column footline \\
+	\includegraphics[page=2, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Example 3:}
+	"\usepackage[threecols]{hackthefootline}" \\
+	\textit{Effect:} A three-column footline \\
+	\includegraphics[page=3, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Example 4:}
+	"\usepackage{hackthefootline}" \\
+	\textit{Effect:} The footline gets removed
+	
+	
+	\subsection{Switching templates}\label{examples-switchtemplates}
+	This section assumes, that the "\usepackage[twocols]{hackthefootline}" command was used to load the "hackthefootline" package. \\[\medskipamount]
+	The preamble contains the following commands for setting the information about title, author, institute and date: \\[\smallskipamount]
+	"\title[Short Introduction]{%" \\
+	"    A short introduction on \texttt{hackthefootline}'s facilities}" \\
+	"\author[S. Friedl]{Sebastian Friedl}" \\
+	"\institute[Some Institute]{Some Institute far, far away}" \\
+	"\date[2018/01/15]{January 15, 2018}"
+	
+	\medskip
+	We will start with step 1 and continue further on, each step is changing the result of the last one.
+	
+	\paragraph{Initial style:}~ \\
+	\includegraphics[page=4, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 1:} Show fraction frame numbers \\
+	\textit{Command:} "\htfconfig{framenrs=fraction}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=5, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 2:} Show the short version of the date \\
+	\textit{Command:} "\htfconfig{date=short}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=6, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 3:} In addition to the author, show the insitute in parentheses \\
+	\textit{Command:} "\htfconfig{authinst=instpths}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=7, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 4:} Show the long, full title \\
+	\textit{Command:} "\htfconfig{title=long}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=8, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 5:} The right column is too full now. Remove the frame numbers \\
+	\textit{Command:} "\htfconfig{framenrs=none}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=9, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 6:} Switch to a one-column footline and remove the date \\
+	\textit{Command:} "\htfconfig{cols=one, date=none}" \\
+	\textit{Effect:} \\
+	\includegraphics[page=10, width=\textwidth, trim=0 0 0 15, clip]{hackthefootline-examples}
+	
+	\paragraph{Step 7:} Remove the footline \\
+	\textit{Command:} "\htfconfig{cols=none}" \\
+	\textit{Effect:} No footline will be shown (but a space above the frame's bottom …)
+\end{document}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.pdf b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.pdf
new file mode 100644
index 00000000000..178db6caf8f
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.pdf
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.tex b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.tex
new file mode 100644
index 00000000000..6536301c1bb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/hackthefootline/doc/hackthefootline-examples.tex
@@ -0,0 +1,101 @@
+%%	This is file 'hackthefootline-examples.tex', Version 2018-01-16
+%%	Copyright 2017 Sebastian Friedl <sfr682k@t-online.de>
+%% 
+%%	This work may be distributed and/or modified under the conditions of the LaTeX Project
+%%	Public License, either version 1.3c of this license or (at your option) any later version.
+%%	The latest version of this license is available at
+%%		http://www.latex-project.org/lppl.txt
+%%	and version 1.3c or later is part of all distributions of LaTeX version 2008-05-04 or later
+%%
+%%	This work has the LPPL maintenace status 'maintained'.
+%%	The current maintainer of this work is Sebastian Friedl.
+%%
+%%	This work consists of the files hackthefootline.sty, hackthefootline-examples.tex and
+%%	hackthefootline-doc.tex
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	The hackthefootline package is a tool providing arbitrary footline selection and
+%%	configuration for LaTeX beamer's standard themes (other themes may also work, of course)
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	Please report bugs and other problems as well as suggestions for improvements
+%%	to my email address (sfr682k@t-online.de).
+%%
+%%	-------------------------------------------------------------------------------------------
+%%
+%%	Acknowledgement:
+%%	The basic layout of the two- and three-column footline is based on the original LaTeX
+%%	beamer split and infolines outer themes written by Till Tantau.
+%%
+%%	-------------------------------------------------------------------------------------------
+
+
+\documentclass[12pt]{beamer}
+
+\usepackage[utf8]{inputenc}
+\usepackage[tabular]{sourcesanspro}
+\usepackage{sourcecodepro}
+
+\usepackage[twocols]{hackthefootline}
+\geometry{paperheight=1cm}
+
+\usecolortheme{whale}
+\usefonttheme[onlysmall]{structurebold}
+\setbeamertemplate{headline}{}
+\setbeamertemplate{navigation symbols}{}
+
+\title{Examples for using the hackthefootline package}
+\author{Sebastian Friedl <sfr682k@t-online.de>}
+
+\begin{document}
+	\title[Short title]{Title}
+	\author[Short author]{Author}
+	\institute[Short institute]{Institute}
+	\date[Short date]{Date}
+	
+	\htfconfig{cols=one, title=short, authinst=both, date=none, framenrs=fraction, atsep=colon}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{cols=two, title=short, authinst=onlyauthor, date=none, framenrs=none}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{cols=three, title=short, authinst=instpths, date=short, framenrs=fraction}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	
+	\title[Short Introduction]{A short introduction on \texttt{hackthefootline}'s facilities}
+	\author[S. Friedl]{Sebastian Friedl}
+	\institute[Some Institute]{Some Institute far, far away}
+	\date[2018/01/15]{January 15, 2018}
+	\htfconfig{cols=two, title=short, authinst=onlyauthor, date=none, framenrs=none}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{framenrs=fraction}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{date=short}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{authinst=instpths}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{title=long}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{framenrs=none}
+	\frame{}
+	\addtocounter{framenumber}{-1}
+	
+	\htfconfig{cols=one, date=none}
+	\frame{}
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.pdf b/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.pdf
deleted file mode 100644
index 7eb6d60c843..00000000000
--- a/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.tex b/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.tex
deleted file mode 100644
index 2af404db4cf..00000000000
--- a/Master/texmf-dist/doc/latex/hackthefootline/hackthefootline-doc.tex
+++ /dev/null
@@ -1,324 +0,0 @@
-%%	This is file 'hackthefootline-doc.tex', Version 2017-08-04
-%%	Copyright 2017 Sebastian Friedl <sfr682k@t-online.de>
-%% 
-%%	This work may be distributed and/or modified under the conditions of the LaTeX Project
-%%	Public License, either version 1.3c of this license or (at your option) any later version.
-%%	The latest version of this license is available at
-%%		http://www.latex-project.org/lppl.txt
-%%	and version 1.3c or later is part of all distributions of LaTeX version 2008-05-04 or later
-%%
-%%	This work has the LPPL maintenace status 'maintained'.
-%%	The current maintainer of this work is Sebastian Friedl.
-%%
-%%	This work consists of the files hackthefootline.sty and hackthefootline-doc.tex
-%%
-%%	-------------------------------------------------------------------------------------------
-%%
-%%	The hackthefootline package is a tool providing arbitrary footline selection for
-%%	LaTeX beamer's standard themes (other themes may also work, of course)
-%%
-%%	-------------------------------------------------------------------------------------------
-%%
-%%	Please report bugs and other problems as well as suggestions for improvements
-%%	to my email address (sfr682k@t-online.de).
-%%
-%%	-------------------------------------------------------------------------------------------
-%%
-%%	Acknowledgement:
-%%	The basic layout of the two- and three-column footline is based on the original LaTeX
-%%	beamer split and infolines outer themes written by Till Tantau.
-%%
-%%	-------------------------------------------------------------------------------------------
-
-% !TeX spellcheck = en_GB
-
-% !TeX document-id = {681db40e-7a84-4428-b4f4-84e230e3ba79}
-% !TeX program=lualatex
-% !TeX TXS-program:compile=txs:///lualatex/[--shell-escape]
-
-
-\documentclass[11pt]{ltxdoc}
-
-\usepackage[charter]{mathdesign}
-\usepackage[no-math]{fontspec}
-\usepackage{polyglossia}
-\setdefaultlanguage{english}
-
-\usepackage{csquotes}
-\usepackage{hologo}
-\usepackage{hyperref}
-\usepackage{minted}
-	\newcommand{\ltxcmd}[1]{\mintinline{LaTeX}{#1}}
-\usepackage[english]{selnolig}
-\usepackage{tikz}
-
-\parindent 0pt
-
-\setmainfont{Noto Serif}
-\setsansfont[Scale=MatchLowercase]{Source Sans Pro}
-\setmonofont[Scale=MatchLowercase]{OCR A Extended}[AutoFakeBold=1.75,AutoFakeSlant=0.225]
-
-\usepackage[left=4.50cm,right=2.75cm,top=3.25cm,bottom=2.75cm,nohead]{geometry}
-
-\hyphenation{}
-
-
-\title{The \texttt{\bfseries hackthefootline} package \\ {\large\url{https://github.com/SFr682k/hackthefootline}}}
-\author{Sebastian Friedl \\ \href{mailto:sfr682k@t-online.de}{\ttfamily sfr682k@t-online.de}}
-\date{2017/08/04}
-
-\hypersetup{pdftitle={The hackthefootline package},pdfauthor={Sebastian Friedl}}
-
-\begin{document}
-	\maketitle
-	\thispagestyle{empty}
-	
-	\begin{center} \itshape
-		Dedicated to all the \LaTeX\ beamer users \dots
-		
-		\medskip
-		\dots who load two different themes in the same presentation \\ or redefine commands to obtain the desired footline \dots
-		
-		\medskip
-		\dots and the other guys just using \mintinline{LaTeX}{\setbeamertemplate{footline}}
-	\end{center}
-	
-	\medskip
-	\begin{abstract}
-		\hspace{-1.5em}%
-		Provides arbitrary footline selection for \LaTeX\ beamer's standard themes (and maybe other themes) by \enquote{hacking} it. \\
-		In this content, \enquote{hacking} means to redefine the footline provided by theme with one of the footline templates provided by this package.
-	\end{abstract}
-	
-	
-	\tableofcontents
-	
-	\clearpage
-	
-
-
-	\subsection*{Dependencies and other requirements}
-	\addcontentsline{toc}{subsection}{Dependencies and other requirements}
-	\emph{Load the \texttt{hackthefootline} package only in \LaTeX\ beamer documents!} \\
-	The package itself depends on the following other packages:
-	
-	\medskip
-	\DescribeMacro{appendixnumber-}\DescribeMacro{beamer}
-	The \texttt{appendixnumberbeamer} package implements a simple solution for appendix frames not being calculated into the total number of frames
-	
-	\medskip
-	\DescribeMacro{etoolbox}
-	Provides access on \hologo{eTeX} primitives
-	
-	\medskip
-	\DescribeMacro{calc}
-	Required for basic calculations
-
-	\medskip
-	\DescribeMacro{numprint}
-	Prints out numbers, counters and lengths
-	
-	\bigskip
-	The dependencies can be removed completely by passing some options to the package. See section \ref{packageoptions} for further details.
-	
-	
-	\subsection*{License}
-	\begin{small}
-		\addcontentsline{toc}{subsection}{License}
-		\textcopyright\ 2017 Sebastian Friedl
-		
-		\smallskip
-		This work may be distributed and/or modified under the conditions of the \LaTeX\ Project Public License, either version 1.3c of this license or (at your option) any later version.
-		
-		\smallskip
-		The latest version of this license is available at \url{http://www.latex-project.org/lppl.txt} and version 1.3c or later is part of all distributions of \LaTeX\ version 2008-05-04 or later.
-		
-		\smallskip
-		This work has the LPPL maintenace status \enquote*{maintained}. The current maintainer of this work is Sebastian Friedl. \\
-		This work consists of the following files:
-		\begin{itemize} \itemsep 0pt
-			\item \texttt{hackthefootline.sty} and
-			\item \texttt{hackthefootline-doc.tex}
-		\end{itemize}
-	\end{small}
-	
-	
-	\subsection*{Acknowledgement}
-	\addcontentsline{toc}{subsection}{Acknowledgement}
-	The basic layout of the two-- and three--column footline is based on the original \LaTeX\ beamer split and infolines outer themes written by Till Tantau.
-	
-	
-	\subsection*{Notice: Behaviour inside the presentation's appendix}
-	\addcontentsline{toc}{subsection}{Notice: Behaviour inside the presentation's appendix}
-	By default, this package \emph{does not count appendix frames} into the total number of frames and resets the counter for frame numbers to 1 as soon as the \ltxcmd{\appendix} command is used. \\
-	Also, frame numbers won't be displayed on frames inside the appendix.
-	
-	\medskip
-	This behaviour can be avoided by passing the \texttt{countappendixframes} option to the package.
-	
-	
-	
-	\clearpage
-	
-	
-	% DOCUMENTATION PART ------------------------------------------------------------------------------------------------------------------------
-	
-	\section{Using the package}
-	The \mintinline{LaTeX}{\usepackage[<Options>]{hackthefootline}} command loads the package\footnote{To do so, the package has to be installed in a way \LaTeX\ is able to find it}. The complete list of options can be found in section \ref{packageoptions}.
-	
-	\medskip
-	At least, you have to pass the \emph{footline's number of columns} as an option to the package \textit{(available: \texttt{onecol}, \texttt{twocols} or \texttt{threecols})}. If you don't do so, the footline gets removed.
-	
-	
-	\section{Package options} \label{packageoptions}
-	The \texttt{hackthefootline} package provides the following options:
-	
-	\medskip
-	\DescribeMacro{onecol}
-	The \enquote{initial footline hack} produces a one--column footline
-	
-	\medskip
-	\DescribeMacro{twocols}
-	The \enquote{initial footline hack} produces a two--column footline
-	
-	\medskip
-	\DescribeMacro{threecols}
-	The \enquote{initial footline hack} produces a three--column footline
-	
-	\medskip
-	\DescribeMacro{countappendix-}\DescribeMacro{frames}
-	If the \texttt{countappendixframes} option is passed to the package, appendix frames are counted into the total number of frames. \\
-	\textit{Removes following dependencies: \texttt{appendixnumberbeamer}, \texttt{etoolbox}}
-	
-	\medskip
-	\DescribeMacro{nofun}
-	Doesn't support frame numbers being shown as \enquote{percent of presentation} \\
-	\textit{Removes following dependencies: \texttt{calc}, \texttt{numprint}}
-	
-	
-	\section{Default configurations}	
-	\subsection*{One--column footline}
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (.5\textwidth,-1.25ex);
-		\node[right] at (-.5\textwidth,0) {Short author, short institute:~~~~Short title};
-		\node[left]  at ( .5\textwidth,0) {1 / 1};
-	\end{tikzpicture}
-	
-	\subsection*{Two--column footline}
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\draw ( .5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\node[left]  at (0,0) {Short author};
-		\node[right] at (0,0) {Short title};
-	\end{tikzpicture}
-	
-	\subsection*{Three-column footline}
-	\begin{tikzpicture}
-		\draw (-.5000\textwidth,1.25ex) rectangle (-.1667\textwidth,-1.25ex);
-		\draw (-.1667\textwidth,1.25ex) rectangle ( .1667\textwidth,-1.25ex);
-		\draw ( .1667\textwidth,1.25ex) rectangle ( .5000\textwidth,-1.25ex);
-		\node[right] at (-.5\textwidth,0) {Short auth. (short inst.)};
-		\node        at (0,            0) {Short title};
-		\node[left]  at ( .5\textwidth,0) {Short date~~~~1/1};
-	\end{tikzpicture}
-	
-	
-	\section{Defined templates}
-	The \texttt{hackthefootline} package defines templates with a variety of styles to provide easy personalisation. All defined templates are listed in table \ref{deftemplates}. Switching between different styles of a template is described in section \ref{switchingtemplates}.
-	
-	\begin{table} \centering\renewcommand{\arraystretch}{1.25}
-		\begin{tabular}{lll}
-			Template              & Style                               & Switching command             \\ \hline\hline
-			\textbf{Title}        & \textit{Short title}                & \ltxcmd{\htfshorttitle}       \\
-			                      & \textit{Long presentation title}    & \ltxcmd{\htflongtitle}        \\
-			                      & \texttt{no title}                   & \ltxcmd{\htfnotitle}          \\ \hline
-			\textbf{Author/Inst.} & \textit{Short author}               & \ltxcmd{\htfonlyauthor}       \\
-			                      & \textit{Short institute}            & \ltxcmd{\htfonlyinstitute}    \\
-			                      & \textit{Short author (short inst.)} & \ltxcmd{\htfinstitutepths}    \\
-			                      & \textit{Short inst. (short author)} & \ltxcmd{\htfauthorpths}       \\
-			                      & \textit{Short author, short inst.}  & \ltxcmd{\htfauthinst}         \\
-			                      & \texttt{no author/inst.}            & \ltxcmd{\htfnoauthinst}       \\ \hline
-			\textbf{Date}         & \textit{Short date}                 & \ltxcmd{\htfshortdate}        \\
-			                      & \textit{Long date}                  & \ltxcmd{\htflongdate}         \\
-			                      & \texttt{no date}                    & \ltxcmd{\htfnodate}           \\ \hline
-			\textbf{Frame nr.}    & \textit{1}                          & \ltxcmd{\htfcounterframenrs}  \\
-			                      & \textit{1 / 5}                      & \ltxcmd{\htffractionframenrs} \\
-			                      & \textit{42\,\%}                     & \ltxcmd{\htfpercentframenrs}  \\
-			                      & \texttt{no frame numbers}           & \ltxcmd{\htfnoframenrs}       \\ \hline
-			\textbf{Separators:}  & \textit{Author: Title}              & \ltxcmd{\htfcolonsep}         \\
-			                      & \textit{Author, Title}              & \ltxcmd{\htfcommasep}         \\
-			                      & \textit{Author~~~~Title}            & \ltxcmd{\htfsepspace}
-		\end{tabular}
-		
-		\caption{Defined templates and styles}
-		\label{deftemplates}
-	\end{table}
-	
-	\section{Switching styles} \label{switchingtemplates}
-	The styles of the templates at the initial hack are selected depending on the footline's default settings. \\
-	You are able to switch styles inside the \texttt{document} environment by \dots
-	\begin{enumerate}
-		\item changing the current settings using the commands listed in table~\ref{deftemplates} \textit{\textbf{and}}
-		%
-		\item applying the settings with the \ltxcmd{\hackthefootline} command. \par
-			  \textbf{Your changes to the footline's settings only apply when executing this command.}
-	\end{enumerate}
-	
-	\textit{Example:} \vspace{-.75em}
-	\begin{minted}[gobble=2,tabsize=4]{LaTeX}
-		\htflongdate		% Changes current settings ...
-		\htfauthinst
-		\hackthefootline	% ... and applies the changes
-	\end{minted}
-	
-	\bigskip
-	If a template is not shown in the current configuration (e.~g. the frame number in the two--column footline), just switch the style:
-
-	\medskip
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\draw ( .5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\node[left]  at (0,0) {Short author};
-		\node[right] at (0,0) {Short title};
-	\end{tikzpicture}
-	\vspace{-1.5em}
-	\begin{minted}[gobble=2,tabsize=4]{LaTeX}
-		\htfcounterframenrs
-		\hackthefootline
-	\end{minted}
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\draw ( .5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\node[left]  at (0,            0) {Short author};
-		\node[right] at (0,            0) {Short title};
-		\node[left]  at ( .5\textwidth,0) {1};
-	\end{tikzpicture}
-	
-	
-	\bigskip\bigskip
-	Also, a template shown in the current configuration can be \enquote{removed} by switching the style:
-	
-	\medskip
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\draw ( .5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\node[left]  at (0,            0) {Short author};
-		\node[right] at (0,            0) {Short title};
-		\node[left]  at ( .5\textwidth,0) {1};
-	\end{tikzpicture}
-	\vspace{-1.5em}
-	\begin{minted}[gobble=2,tabsize=4]{LaTeX}
-		\htfnoauthinst
-		\hackthefootline
-	\end{minted}
-	\begin{tikzpicture}
-		\draw (-.5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\draw ( .5\textwidth,1.25ex) rectangle (0,-1.25ex);
-		\node[right] at (0,            0) {Short title};
-		\node[left]  at ( .5\textwidth,0) {1};
-	\end{tikzpicture}
-	
-	\vfill
-	\thispagestyle{empty}
-	\listoftables
-\end{document}