graphics (12jun17)

git-svn-id: svn://tug.org/texlive/trunk@44579 c570f23f-e606-0410-a88d-b1316a301751

14 files changed, 5 insertions, 1505 deletions

diff --git a/Master/texmf-dist/doc/latex/graphics/changes.txt b/Master/texmf-dist/doc/latex/graphics/changes.txt
index fde3888396c..a60bdb94e35 100644
--- a/Master/texmf-dist/doc/latex/graphics/changes.txt
+++ b/Master/texmf-dist/doc/latex/graphics/changes.txt
@@ -3,6 +3,11 @@ It is provided for convenience only.  It therefore makes no claims to
 completeness or accuracy and it contains some references to files that
 are not part of the distribution.
 =======================================================================
+2017-05-31  David Carlisle, Joseph Wright <latex-bugs@latex-project.org>
+
+	* graphics.dtx: Generalize bounding box reader for use in other formats than EPS
+	* graphicsx.dtx: Additional options, moved from pdftex.def
+
 
 2017-04-14  David Carlisle  <latex-bugs@latex-project.org>
 
diff --git a/Master/texmf-dist/doc/latex/graphics/color.pdf b/Master/texmf-dist/doc/latex/graphics/color.pdf
index 7966c5d9fce..6588dbf540a 100644
--- a/Master/texmf-dist/doc/latex/graphics/color.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/color.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/drivers.pdf b/Master/texmf-dist/doc/latex/graphics/drivers.pdf
index 3245dd0e6fe..b0ae0355fbf 100644
--- a/Master/texmf-dist/doc/latex/graphics/drivers.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/drivers.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/epsfig.pdf b/Master/texmf-dist/doc/latex/graphics/epsfig.pdf
index ab48d9e2230..5f78c0ae4e3 100644
--- a/Master/texmf-dist/doc/latex/graphics/epsfig.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/epsfig.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/graphics.pdf b/Master/texmf-dist/doc/latex/graphics/graphics.pdf
index b9e54b24cc2..44262c4d3f6 100644
--- a/Master/texmf-dist/doc/latex/graphics/graphics.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/graphics.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/graphicx.pdf b/Master/texmf-dist/doc/latex/graphics/graphicx.pdf
index 2ec53aec8d0..b8ca042212f 100644
--- a/Master/texmf-dist/doc/latex/graphics/graphicx.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/graphicx.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/grfguide.pdf b/Master/texmf-dist/doc/latex/graphics/grfguide.pdf
index 680f597dee4..9a1e214aa03 100644
--- a/Master/texmf-dist/doc/latex/graphics/grfguide.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/grfguide.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/grfguide.tex b/Master/texmf-dist/doc/latex/graphics/grfguide.tex
deleted file mode 100644
index 193282900b9..00000000000
--- a/Master/texmf-dist/doc/latex/graphics/grfguide.tex
+++ /dev/null
@@ -1,1005 +0,0 @@
-%% grfguide.tex Copyright (C) 1994 1995 1996 1998 1999 David Carlisle
-%%              Copyright (C) 2005 2014 2016 David Carlisle, LaTeX3 Project
-%%
-%% This file is part of the Standard LaTeX `Graphics Bundle'.
-%% It may be distributed under the terms of the LaTeX Project Public
-%% License, as described in lppl.txt in the base LaTeX distribution.
-%% Either version 1.3c or, at your option, any later version.
-%%
-%% This file has the LPPL maintenance status "maintained".
-
-\begin{filecontents*}{a.ps}
-%!
-%%BoundingBox:0 0 72 72
-0 0 moveto
-72 72 rlineto
-72 neg 0 rlineto
-72 72 neg rlineto
-stroke
-0 0 moveto
-/Times-Roman findfont
-72 scalefont
-setfont
-(A) show
-showpage
-\end{filecontents*}
-\begin{filecontents*}{a.pdf}
-%PDF-1.4
-%%%%%
-1 0  obj
-<<
-/Pages 2 0 R
-/Type /Catalog
->>
- endobj
-2 0  obj
-<<
-/Kids [3 0 R]
-/Type /Pages
-/Count 1
->>
- endobj
-3 0  obj
-<<
-/Rotate 0
-/Parent 2 0 R
-/MediaBox [0 0 72 72]
- /Resources
-<<
-/ExtGState 4 0 R
-/Font 5 0 R
-/ProcSet [/PDF /Text]
->>
-/pdftk_PageNum 1
-/Type /Page
-/Contents 6 0 R
->>
- endobj
-4 0  obj
-<<
-/R7 7 0 R
->>
- endobj
-5 0  obj
-<<
-/R8 8 0 R
->>
- endobj
-6 0  obj
-<<
-/Length 135
->>
-stream
-q 0.1 0 0 0.1 0 0 cm
-/R7 gs
-10 w
-0 G
-0 0 m
-720 720 l
-0 720 l
-720 0 l
-S
-0 g
-q
-10 0 0 10 0 0 cm BT
-/R8 72 Tf
-1 0 0 1 0 0 Tm
-(A)Tj
-ET
-Q
-Q
-
- endstream
- endobj
-7 0  obj
-<<
-/Type /ExtGState
-/OPM 1
->>
- endobj
-8 0  obj
-<<
-/BaseFont /Times-Roman
-/LastChar 65
-/Subtype /Type1
-/FontDescriptor 9 0 R
-/Widths [722]
-/Type /Font
-/Encoding /WinAnsiEncoding
-/FirstChar 65
->>
- endobj
-9 0  obj
-<<
-/FontName /Times-Roman
-/StemV 105
-/CharSet (/A)
-/Ascent 674
-/Flags 65568
-/Descent 0
-/ItalicAngle 0
-/MissingWidth 250
-/FontBBox [0 0 706 674]
-/Type /FontDescriptor
-/CapHeight 674
->>
- endobj
-10 0  obj
-<<
-/Producer (GPL Ghostscript 9.06)
-/ModDate (D:20140426202438+01'00')
-/CreationDate (D:20140426202438+01'00')
->>
-endobj xref
-0 11
-0000000000 65535  f
-0000000015 00000  n
-0000000066 00000  n
-0000000125 00000  n
-0000000308 00000  n
-0000000341 00000  n
-0000000374 00000  n
-0000000563 00000  n
-0000000610 00000  n
-0000000774 00000  n
-0000000975 00000  n
-trailer
-
-<<
-/Info 10 0 R
-/Root 1 0 R
-/Size 11
-/ID [<4ca1370d594acd28b9d948a5e8b925c3> <4ca1370d594acd28b9d948a5e8b925c3>]
->>
-startxref
-1106
-%%EOF
-\end{filecontents*}
-\documentclass{ltxguide}
-
-%%% No driver option specified
-%%% set up the files color.cfg and graphics.cfg for your site.
-%%% for example:
-%%%
-%%% \ExecuteOptions{dvips}
-%%%
-\usepackage{color,graphicx,shortvrb}
-
-%% Just as an example, and to make sure, in case some
-%% driver option has not declared a default rule for
-%% .ps files:
-%\DeclareGraphicsRule{.ps}{eps}{.ps}{}
-%\DeclareGraphicsExtensions{.pdf,.ps}
-%% Which means:
-%% .ps files are (to be treated as) EncapsulatedPostScript
-%% files. The .ps file is to be read for the BoundingBox.
-%% No `special' commands need to be applied by the driver.
-
-
-\renewcommand\star{{\ttfamily*}}
-
-\let\package\textsf
-
-\newlength{\gxlen}
-\settowidth{\gxlen}{\package{graphicx}: }
-\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}}
-\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}}
-
-\MakeShortVerb{\|}
-
-\begin{document}
-\title{Packages in the `graphics' bundle}
-\author{D. P. Carlisle \and The \LaTeX3 Project}
-\date{2016/12/23}
-
-\maketitle
-
-\tableofcontents
-
-\section{Introduction}
-This document serves as a user-manual for the packages \package{color},
-\package{graphics}, and \package{graphicx}. Further documentation may be
-obtained by processing the  source (|dtx|) files of the individual
-packages.
-
-\section{Driver support}\label{drivers}
-All these packages rely on features that are not in \TeX\ itself.
-These features must be supplied by the `driver' used to print the
-|dvi| file. Unfortunately not all drivers support the same features, and
-even the internal method of accessing these extensions varies between
-drivers. Consequently all these packages take options such as
-`|dvips|' to specify which driver is being used.
-
-Normally you should \emph{not} specify the driver option explicitly
-in the document, but allow it to be defaulted automatically.
-This allows the document to be portable between different systems.
-
-Your \TeX\ distribution should have included |graphics.cfg| and
-|color.cfg| configuration files to specify these defaults.
-Standard versions of the configuration files are maintained by the
-\LaTeX\ Project and distributed in the CTAN |graphics-cfg| collection.
-
-For special requirements you may edit a copy of these |cfg| files
-to set up a site default for these options. Suppose that you wish
-the \package{color} package to always default to use specials for the
-PostScript driver, |dvisvgm|. In that case, create a file |color.cfg|
-containing the line:\\
-|\ExecuteOptions{dvisvgm}|\\
-Normally you will want an identical file |graphics.cfg| to set a similar
-default for the graphics packages.
-
-The following driver options are declared in the packages.
-The matching definition files (\emph{driver}|.def|)
-are now also maintained by the \LaTeX\ project,
-but distributed separately, in the CTAN |graphics-def| collection.
-\begin{quote}\raggedright
-  |dvipdfmx|, |dvips|, |dvisvgm|, |luatex|, |pdftex|, |xetex|
-\end{quote}
-
-
-The following two options are also supported, they do not correspond
-to separate definition files, but are essentially aliases for the
-|dvips| option (and |monochrome| in the case of |xdvi|).
-\begin{quote}\raggedright
- |xdvi|,  |oztex|
-\end{quote}
-
-The following set of options are supported by these packages
-with associated driver files extracted from the |drivers.dtx|
-documented source in this bundle. These are now, mainly of historic
-interest but the documented sources do contain some useful code
-and advice if you need to produce a new definition file for a new
-driver or \TeX\ system. |drivers.dtx| also contains documented
-sources for older driver files that are no longer extracted.
-\begin{quote}\raggedright
- |dvipdf|, |dvipdfm|, |dviwin|, |dvipsone|,
- |emtex|, |pctexps|, |pctexwin|,  |pctexhp|, |pctex32|,
- |truetex|, |tcidvi|, |vtex|
-\end{quote}
-
-The final driver option is an alias for |dvipsone|.
-\begin{quote}\raggedright
-  |dviwindo|
-\end{quote}
-  
-
-\section[Colour]{Colour\footnote{%
-The basic \package{color} package functionality described here
-will be enough for many uses, however a much extended version
-is available in the contributed \package{xcolor} package, distributed
-and maintained separately. All the color commands described here are
-also available if you specify \package{xcolor} in your document.}%
-}
-The colour support is built around the idea of a system of
-\emph{Colour Models}. The Colour models supported by a driver vary,
-but typically include
-\begin{description}
-\item[rgb] Red Green Blue: A comma separated list of three numbers
-  between~0 and~1, giving the components of the colour.
-\item[cmyk] Cyan Magenta Yellow [K]Black:  A comma separated list of
-  four numbers between~0 and~1, giving the components of the colour
-  according to the additive model used in most printers.
-\item[gray] Grey scale: a single number between~0 and~1.
-\item[named] Colours accessed by name, e.g.\ `JungleGreen'. Not all
-  drivers support this model. The names must either be `known' to the
-  driver or added using commands described in |color.dtx|. Some drivers
-  support an extended form of the named model in which an `intensity' of
-  the colour may also be specified, so `\mbox{JungleGreen, 0.5}' would
-  denote that colour at half strength.
-\end{description}
-Note that the \textbf{named} model is really just given as an example
-of a colour model that takes names rather than a numeric specification.
-Other options may be provided locally that provide different colour
-models, eg \textbf{pantone} (An industry standard set of colours),
-\textbf{x11} (Colour names from the X Window System), etc. The
-standard distribution does not currently have such models, but the
-\textbf{named} model could be used as an example of how to define a new
-colour model. The names used in the \textbf{named} model are those 
-suggested by Jim Hafner in his \textsf{colordvi} and \textsf{foiltex}
-packages, and implemented originally in the |color.pro| header file for
-the \texttt{dvips} driver.
-
-\subsection{Package Options}
-Most of the options to the \package{color} package just specify a
-driver, e.g., \ |dvips|, as discussed in section~\ref{drivers}.
-
-One special option for the \package{color} package 
-that is of interest is |monochrome.|
-If this option is selected the colour commands are all
-disabled so that they do not generate errors, but do not generate colour
-either. This is useful if previewing with a previewer that can not
-produce colour.
-
-Three other package options control the use of the \textbf{named} model.
-The |dvips| driver (by default) pre-defines 68 colour names. The |dvips|
-option normally makes these names available in the \textbf{named} colour
-model. If you do not want these names to be declared in  this model
-(Saving \TeX\ some memory) you may give the |nodvipsnames|
-option. Conversely, if you are using another driver, you may wish to
-add these names to the named model for that driver (especially if you
-are processing a document originally produced on |dvips|). In this case
-you could use the |dvipsnames| option. Lastly the |usenames| option
-makes all names in the \textbf{named} model directly available, as
-described below.
-
-\subsection{Defining Colours}
-
-The colours |black|, |white|, |red|, |green|, |blue|, |cyan|,
-|magenta|, |yellow| should be predefined, but should you wish to mix
-your own colours use the |\definecolor| command.
-
-\begin{decl}
-|\definecolor|\arg{name}\arg{model}\arg{colour specification}
-\end{decl}
-
-
-This defines \m{name} as a colour which can be used in later colour
-commands. For example
-\begin{verbatim}
-\definecolor{light-blue}{rgb}{0.8,0.85,1}
-\definecolor{mygrey}{gray}{0.75}
-\end{verbatim}
-\definecolor{light-blue}{rgb}{0.8,0.85,1}
-\definecolor{mygrey}{gray}{0.75}
-
-Now |light-blue| and |mygrey| may be used in addition to the
-predefined colours above.
-
-\subsection{Using Colours}
-
-\subsubsection{Using predefined colours}
-The syntax for colour changes is designed to mimic font changes.
-The basic syntax is:
-
-\begin{decl}
-|\color|\arg{name}
-\end{decl}
-
-This is a \emph{declaration}, like |\bfseries| It changes the current
-colour to \m{name} until the end of the current group or
-environment.
-
-An alternative command syntax is to use a \emph{command} form that
-takes the text to be coloured as an \emph{argument}. This is similar
-to the font commands such as |\textbf|:
-
-\begin{decl}
-|\textcolor|\arg{name}\arg{text}
-\end{decl}
-
-
-So the above is essentially equivalent to
-|{\color|\arg{name}\emph{text}|}|.
-
-\subsubsection{Using colour specifications directly}
-
-
-\begin{decl}
-|\color|\oarg{model}\arg{specification}\\
-|\textcolor|\oarg{model}\arg{specification}\arg{text}
-\end{decl}
-
-Normally one would predeclare all the colours used in a package, or in
-the document preamble, but sometimes it is convenient to directly use
-a colour without naming it first. To achieve this |\color| (and all
-the other colour commands) take an optional argument specifying the
-model. If this is used then the mandatory argument takes a
-\m{colour specification} instead of a \m{name}. For example:\\
-|\color[rgb]{1,0.2,0.3}|\\
-would directly select that colour.
-
-This is particularly useful for accessing the \textbf{named} model:\\
-|\color[named]{BrickRed}| selects the |dvips| colour BrickRed.
-
-Rather than repeatedly use |[named]| you may use |\definecolor| to
-provide convenient aliases:\\
-|\definecolor{myred}{named}{WildStrawberry}|
-     \ldots\ |\color{myred}|\ \ldots
-
-Alternatively if you are happy to use the existing names from the
-\textbf{named} model, you may use the |usenames| package option, which
-effectively calls |\definecolor| on every colour in the \textbf{named}
-model, thus allowing |\color{WildStrawberry}| in addition to
-|\color[named]{WildStrawbery}|.
-
-\subsection{Named Colours}
-Using the \textbf{named} colour model has certain advantages over
-using other colour models. 
-
-Firstly as the |dvi| file contains a request
-for a colour by \emph{name}, the actual mix of primary colours used to
-obtain the requested colour can be tuned to the characteristics of a
-particular printer. In the |dvips| driver the meanings of the colour
-names are defined in the header file |color.pro|. Users are encouraged
-to produce different versions of this file for any printers they use. By
-this means the same dvi file should produce colours of similar
-appearance when printed on printers with different colour
-characteristics.
-
-Secondly, apart from the so called `process colours' that are produced
-by mixing primary colours during the print process, one may want to use
-`spot' or `custom' colours. Here a particular colour name does not
-refer to a mix of primaries, but to a particular ink. The parts of the
-document using this colour will be printed separately using this named
-ink colour.
-
-\subsection{Page Colour}
-
-
-\begin{decl}
-|\pagecolor|\arg{name}\\
-|\pagecolor|\oarg{model}\arg{specification}\\
-|\nopagecolor|
-\end{decl}
-
-The background colour of the whole page can be set using
-|\pagecolor|. This takes the same argument forms as |\color| but sets
-the background colour for the current and all subsequent pages. It is
-a global declaration, so you need to  use
-|\nopagecolor|\NEWfeature{2014/04/23}\ to `get back to normal'.
-If that is not supported, you may use |\pagecolor{white}| although that
-will make a white background rather than the default transparent background.
-
-\subsection{Box Backgrounds}
-Two commands similar to |\fbox| produce boxes with the backgrounds
-shaded an appropriate colour.
-
-\begin{decl}
-|\colorbox|\arg{name}\arg{text}\\
-|\colorbox|\oarg{model}\arg{specification}\arg{text}\\
-|\fcolorbox|\arg{name1}\arg{name2}\arg{text}\\
-|\fcolorbox|\oarg{model}%
-            \arg{specification1}\arg{specification2}\arg{text}
-\end{decl}
-
-
-The former produces a box coloured with \emph{name}
-\colorbox{mygrey}{like this}. The latter is similar but puts a frame of
-colour \emph{name1} around the box coloured \emph{name2}.
-
-These commands use the |\fbox| parameters |\fboxrule| and |\fboxsep|
-to determine the thickness of the rule, and the size of the shaded area.
-
-\subsection{Possible Problems}
-
-\TeX\ was not designed with colour in mind, and producing colours
-requires a lot of help from the driver program. Thus, depending on the
-driver, some or all features of the \package{color} package may not be
-available.
-
-Some drivers do not maintain a special `colour stack'. These drivers are
-likely to get confused if you nest colour changes, or use colours in
-floating environments.
-
-Some drivers do not maintain colours over a page break, so that if the
-page breaks in the middle of a coloured paragraph, the last part of the
-text will incorrectly be printed in black.
-
-There is a different type of problem that will occur for all drivers.
-Due to certain technical difficulties\footnote{At least two causes:
-1) The presence of a \texttt{\char`\\special} \m{whatsit} prevents
-\texttt{\char`\\addvspace} `seeing' space on the current vertical list,
-so causing it to incorrectly add extra vertical space. 2) A
-\m{whatsit} as the first item in a \texttt{\char`\\vtop} moves the
-reference point of the box.}%
-, it is possible that at points
-where the colour changes, the \emph{spacing} is affected. For this
-reason the |monochrome| option does not completely disable the colour
-commands, it redefines them to write to the log file. This will have the
-same effects on spacing, so you can produce monochrome drafts of your
-document, at least knowing that the final spacing is being shown.
-\section{The Graphics packages}
-There are two graphics packages:
-\begin{description}
-\item[\package{graphics}] The `standard' graphics package.
-\item[\package{graphicx}] The `extended' or `enhanced' graphics
-  package. 
-\end{description}
-The two differ only in the format of optional arguments for the
-commands defined. The command names, and the mandatory arguments are
-the same for the two packages.
-
-\subsection{Package Options}
-As discussed in section~\ref{drivers}, the graphics packages share the
-same `driver' options as the \package{color} package. As for colour
-you should set up a site-default in a file,
-|graphics.cfg|, containing the line (for |dvips|):\\
-|\ExecuteOptions{dvips}|
-
-The graphics packages have some other options for controlling how many
-of the features to enable:
-\begin{description}
-\item[draft] suppress all the `special' features. In particular
-  graphics files are not included (but they are still read for size
-  info) just the filename is printed in a box of the correct size.
-\item[final] The opposite of |draft|. Useful to over-ride a global
-  |draft| option specified in the |\documentclass| command.
-\item[hiderotate] Do not show rotated text (presumably because the
-  previewer can not rotate).
-\item[hidescale] Do not show scaled text (presumably because the
-  previewer can not scale).
-\item[hiresbb] Look for size specifications in |%%HiResBoundingBox|
-  lines rather than standard |%%BoundingBox| lines.%
-  \NEWfeature{1996/10/29}
-\item[demo] Instead of inserting an image file |\includegraphics|
-  draws a 150\,pt by 100\,pt rectangle unless other dimensions are
-  specified manually.\NEWfeature{2006/02/20}
-\end{description}
-\subsection{Rotation}
-
-\begin{decl}
-\gs |\rotatebox|\arg{angle}\arg{text}\\
-\gx |\rotatebox|\oarg{key val list}\arg{angle}\arg{text}
-\end{decl}
-
-This puts \emph{text} in a box, like |\mbox|, but rotates the box
-through \emph{angle} degrees, \rotatebox{15}{like this}.
-
-The standard version always rotates around the reference point of the
-box, but the \package{keyval} version takes the following keys:
-
-\begin{decl}
-|origin|=\m{label}\\
-|x|=\m{dimen}\\
-|y|=\m{dimen}\\
-|units|=\m{number}
-\end{decl}
-
-So you may specify both |x| and |y|, which give the coordinate of
-the centre of rotation relative to the reference point of the box, eg
-|[x=2mm, y=5mm]|. Alternatively, for the most common points, one may use
-|origin| with a \emph{label} containing one or two of the following:
-|lrctbB| (|B| denotes the baseline, as for \package{PSTricks}). For
-example, compare a default rotation of $180^\circ$
-\ldots\rotatebox{180}{Like This}\ldots\ to the effects gained by using
-the |origin| key:\\
-|[origin = c]| rotates about the centre of the box,\ldots
-         \rotatebox[origin=c]{180}{Like This}\ldots\\
-|[origin = tr]| rotates about the top right hand corner\ldots
-                   \rotatebox[origin=tr]{180}{Like This}\ldots
-
-The |units| key allows a change from the default units of degrees
-anti-clockwise. Give the number of units in one full anti-clockwise
-rotation. For example:\\
-|[units = -360]| specifies degrees clockwise.\\
-|[units= 6.283185]| specifies radians.
-
-\subsection{Scaling}
-
-\subsubsection{Scaling by scale factor}
-
-\begin{decl}
-|\scalebox|\arg{h-scale}\oarg{v-scale}\arg{text}
-\end{decl}
-
-Again this is basically like |\mbox| but scales the \emph{text}.
-If \emph{v-scale} is not specified it defaults to \emph{h-scale}.
-If it is specified the text is distorted as the horizontal and
-vertical stretches are different, \scalebox{3}[.7]{Like This}.
-
-
-\begin{decl}
-|\reflectbox|\arg{text}
-\end{decl}
-
-An abbreviation for |\scalebox{-1}[1]|\arg{text}.
-
-\subsubsection{Scaling to a requested size}
-
-\begin{decl}
-|\resizebox|\star\arg{h-length}\arg{v-length}\arg{text}
-\end{decl}
-
- Scale \emph{text} so that the width is \emph{h-length}.
- If |!| is used as either length argument, the other argument is used
- to determine a scale factor that is used in both directions.
- Normally \emph{v-length} refers to the height of the box, but in the
- star form, it refers to the `height +  depth'. 
- As normal for \LaTeXe\ box length arguments, |\height|,
- |\width|, |\totalheight|, |\depth| may be used to refer to the
- original size of the box.
-
-|\resizebox{1in}{\height}{Some text}|: 
-\resizebox{1in}{\height}{Some text}
-
-|\resizebox{1in}{!}{Some text}|: 
-\resizebox{1in}{!}{Some text}
-
-\subsection{Including Graphics Files}
-The functions for graphics inclusion try to give the same user syntax
-for including any kind of graphics file that can be understood by the
-driver. This relies on the file having an extension that identifies
-the file type. The `driver options' will define a collection of file
-extensions that the driver can handle, although this list may be
-extended using the declarations described below.
-
-If the file's extension is unknown to the driver, the system may try a
-default file type. The PostScript driver files set this default to be
-|eps| (PostScript), but this behaviour may be customised if other
-defaults are required.
-
-\begin{decl}
-\gs |\includegraphics|\star\oarg{llx,lly}\oarg{urx,ury}\arg{file}\\
-\gx |\includegraphics|\star\oarg{key val list}\arg{file}
-\end{decl}
- Include a graphics file.
-
- If \star\ is present, then the graphic is `clipped' to the size
- specified. If \star\ is omitted, then any part  of the graphic that is
- outside the specified `bounding box' will  over-print the surrounding
- text.
-
- If the optional arguments are omitted, then the size of the graphic
- will be determined by reading an external file as described below.
-
-\paragraph{\package{graphics} version}
- If \oarg{urx,ury} is present, then it should specify the coordinates
- of the top right corner of the image, as a pair of \TeX\ dimensions.
- If the units are omitted they default to |bp|. So |[1in,1in]| and
- |[72,72]| are equivalent. If only one optional argument appears, the
- lower left corner of the image is assumed to be at |[0,0]|. Otherwise
- \oarg{llx,lly} may be used to specify the coordinates of this point.
-
-\paragraph{\package{graphicx} version}
-Here the star form is just for compatibility with the standard
-version. It just adds |clip| to the list of keys specified.
-(Also, for increased compatibility, if \emph{two} optional arguments are
-used, the `standard' version of |\includegraphics| is always used, even
-if the \package{graphicx} package is loaded.)
-
-The allowed keys are listed below.
-\begin{description}
-\item[bb] The argument should be four dimensions, separated by spaces.
-  These denote the `Bounding Box' of the printed region within
-  the file.
-\item[bbllx,bblly,bburx,bbury] Set the bounding box. Mainly for
- compatibility with older packages.
- Specifying |bbllx=a,bblly=b,bburx=c,bbury=d|
- is equivalent to specifying |bb = a b c d|.
-\item[natwidth,natheight] Again an alternative to |bb|. 
- |natheight=h,natwidth=w| is equivalent to |bb = 0 0 h w|.
-\item[hiresbb]\NEWfeature{1996/10/29}
- Boolean valued key. If set to |true| (just specifying |hiresbb|
- is equivalent to |hiresbb=true|) then \TeX\ will look for
- |%%HiResBoundingBox| lines rather than |%%BoundingBox|. It may be set
- to |false| to overrule a default setting of |true| set by the
- |hiresbb| package option.
-\item[viewport]\NEWfeature{1995/06/01}
- The |viewport| key takes four arguments, just like
- |bb|. However in this case the values are taken relative to the
- origin specified by the bounding box in the file. So to `view' the
- 1in square in the bottom left hand corner of the area specified by
- the bounding box, use the argument |viewport=0 0 72 72|.
-\item[trim]\NEWfeature{1995/06/01}
- Similar to viewport, but here the four lengths specify the
- amount to remove or add to each side. |trim= 1 2 3 4| `crops' the
- picture by 1bp at the left, 2bp at the bottom, 3bp on the right and
- 4bp at the top.
-\item[angle] Rotation angle.
-\item[origin]\NEWfeature{1995/09/28}
- Origin for rotation. See the documentation of |\rotatebox|.
-\item[width] Required width. The
-  graphic is scaled to this width.
-\item[height] Required height. The
-  graphic is scaled to this height.
-\item[totalheight]\NEWfeature{1995/06/01}
- Specify the total height (height $+$ depth) of the figure.
- This will differ from the `height' if rotation has occurred.
- In particular if the figure has been rotated by $-90^\circ$ 
- then it will have zero height but large depth.
-\item[keepaspectratio]\NEWfeature{1995/09/27}
- Boolean valued key like `clip'.
- If set to true then specifying both `width' and `height' (or
- `totalheight') does not distort the figure but scales such that
-  neither of the specified dimensions is \emph{exceeded}.
-\item[scale] Scale factor.
-\item[clip] Either `true' or `false' (or no value, which is equivalent
-  to `true'). Clip the graphic to the bounding box.
-\item[draft] a boolean valued key, like `clip'. Locally switches to
-  draft mode.
-\item[type] Specify the graphics type.
-\item[ext]  Specify the file extension. This should \emph{only} be
- used in conjunction with |type|.
-\item[read] Specify the file extension of the `read file'. This
- should \emph{only} be used in conjunction with |type|. 
-\item[command] Specify any command to be applied to the file.  This
- should \emph{only} be used in conjunction with |type|.
-\end{description}
-
-For the keys specifying the original size (i.e,, the bounding box,
-trim and viewport keys) the units can be omitted, in
-which case bp (i.e., PostScript points) are assumed.
-
-The first seven keys specify the original size of the image. This size
-needs to be specified in the case that the file can not be read by
-\TeX, or it contains an incorrect size `BoundingBox' specification.
-
-|bbllx|\ldots\ |\bbury| are mainly for compatibility for older
-packages.\\
-|bbllx=a, bblly=b, bburx=c, bbury=d|\\
-is equivalent to\\
-|bb = a b c d|.
-
-|natheight| and |natwidth| are just shorthands for setting the lower
-left coordinate to 0 0 and the upper right coordinate to the specified
-width and height.
-
-The next few keys specify any scaling or rotation to be applied to the
-image. To get these effects using the standard package, the
-|\includegraphics| call must be placed inside the argument of a
-|\rotatebox| or |\scalebox| command.
-
-The keys are read left-to-right, so |[angle=90, height=1in]| means
-rotate by 90 degrees, and then scale to a height of 1in. 
-|[height=1in, angle=90]| would result in a final \emph{width} of 1in.
-
-If the \textsf{calc} package is also loaded the lengths may use 
-\textsf{calc} syntax, for instance to specify a width of 2\,cm 
-less than the text width: |[width=\textwidth-2cm]|.
-
-\TeX\ leaves the space specified either in the file, or in
-the optional arguments. If any part of the image is actually outside
-this area, it will by default overprint the surrounding text. 
-If the star form is used, or |clip| specified, any part of the image
-outside this area will not be printed.
-
-The last four keys suppress the parsing of the filename. If they are
-used, the main \emph{file} argument should not have the file
-extension. They correspond to the arguments of |\DeclareGraphicsRule|
-described below.
-
-To see the effect that the various options have consider the file
-|a.ps|. This file contains the bounding box specification
-\begin{verbatim}
-%%BoundingBox:0 0 72 72
-\end{verbatim}
-That is, the printed region consists of a one-inch square, in
-the bottom left hand  corner of the paper.
-
-In all the following examples the input will be of the form
-\begin{verbatim}
-left---\fbox{\includegraphics{a}}---right
-\end{verbatim}
-With different options supplied to |\includegraphics|.
-
-No optional argument.\\
-left---\fbox{\includegraphics{a}}---right
-
-\gs |\scalebox{0.5}{\includegraphics{a}}|\\
-\gx |\includegraphics[scale=.5]{a}|\\
-left---\fbox{\includegraphics[scale=.5]{a}}---right
-
-\gs |\includegraphics[15,10][35,45]{a}}|\\
-\gx |\includegraphics[viewport= 15 10 35 45]{a}|\\
-left---\fbox{\includegraphics[viewport= 15 10 35 45]{a}}---right
-
-\gs |\includegraphics*[15,10][35,45]{a}}|\\
-\gx |\includegraphics[viewport= 15 10 35 45,clip]{a}|\\
-left---\fbox{\includegraphics[viewport= 15 10 35 45,clip]{a}}---right
-
-\gs |\scalebox{0.5}{\includegraphics{a}}|
-                   and |draft| option.\\
-\gx |\includegraphics[scale=.5, draft]{a}|\\
-left---\fbox{\includegraphics[scale=.5, draft]{a}}---right
-
-\subsection{Other commands in the \package{graphics} package}
-
-\begin{decl}
-|\graphicspath|\arg{dir-list}
-\end{decl}
-This optional declaration may be used to specify a list of directories
-in which to search for graphics files. The format is the same as for
-the \LaTeXe\ primitive |\input@path|. A list of directories, each in a
-|{}| group (even if there is only one in the list). For example:\\
-  |\graphicspath{{eps/}{tiff/}}|\\
- would cause the system to look in the subdirectories |eps| and |tiff|
- of the current directory. (All modern \TeX{} systems use |/|
- as the directory separator, even on Windows.)
-
- The default setting of this path is
- |\input@path| that is: graphics files will be found wherever \TeX\
- files are found.
-
-\begin{decl}
-|\DeclareGraphicsExtensions|\arg{ext-list}
-\end{decl}
- \NEWdescription{1994/12/01}
- This specifies the behaviour of the system when no file extension
- is specified in the argument to |\includegraphics|.
- \arg{ext-list} should be a comma separated list of file extensions.
- (White space is ignored between the entries.)
- A file name is produced by appending one extension from the list.
- If a file is found, the system acts as if that extension had been
- specified. If not, the next extension in \emph{ext-list} is tried.
-
-
-Note that if the extension is not specified in the |\includegraphics|
-command, the graphics file must exist at the time \LaTeX\ is run, as
-the existence of the file is used to determine which extension from
-the list to choose. However if a file extension \emph{is} specified,
-e.g.\ |\includegraphics{a.ps}| instead of |\includegraphics{a}|, then
-the graphics file need not exist at the time \LaTeX\ is used. (In
-particular it may be created on the fly by  the \m{command}
-specified in the |\DeclareGraphicsRule| command described below.)
-\LaTeX\ does however need to be able to determine the size of the
-image so this size must be specified in arguments, or the `read file'
-must exist at the time \LaTeX\ is used.
-
-\begin{decl}
-|\DeclareGraphicsRule|\arg{ext}\arg{type}\arg{read-file}\arg{command}
-\end{decl}
- Any number of these declarations can be made. They determine how the
- system behaves when a file with extension \emph{ext} is specified.
- (The extension may be specified explicitly or, if the argument to
- |\includegraphics| does not have an extension, it may be a default
- extension from the \emph{ext-list} specified with 
- |\DeclareGraphicsExtensions|.)
- 
-\emph{ext} the file extension for which this rule applies. As a special
-case, \emph{ext} may be given as |*| to denote the default behaviour for
-all undeclared extensions (see the example below).
-
-\emph{type} is the `type' of file involved. All files of the same type
-will be input with the same internal command (which must be defined in
-a `driver file'). For example files with extensions |ps|, |eps|,
-|ps.gz| may all be classed as type |eps|.
-
-\emph{read-file} determines the extension of the file that should be
-read to determine size information. It may be the same as \emph{ext}
-but it may be different, for example |.ps.gz| files are not readable
-easily by \TeX, so you may want to put the bounding box information in
-a separate file with extension  |.ps.bb|. If \emph{read-file} is empty,
-|{}|, then the system will not try to locate an external file for size
-info, and the size must be specified in the arguments of
-|\includegraphics|. If the driver file specifies a procedure for
-reading size files for \emph{type}, that will be used, otherwise the 
-procedure for reading |eps| files will be used. Thus the size of
-bitmap files may be specified in a file with a PostScript style
-|%%BoundingBox| line, if no other specific format is available.
-
-As a special case |*| may be used to denote the
-same extension as the graphic file. This is mainly of use in
-conjunction with using |*| as the extension, as in that case the
-particular graphic extension is not known. For example
-\begin{verbatim}
- \DeclareGraphicsRule{*}{eps}{*}{}
-\end{verbatim}
-This would declare a default rule, such that all unknown extensions
-would be treated as EPS files, and the graphic file would be read for
-a BoundingBox comment.
-
-\emph{command} is usually empty, but if non empty it is used in place
-of the filename in the |\special|. Within this argument, |#1| may be
-used to denote the filename. Thus using the dvips driver, one may
-use\\
-|\DeclareGraphicsRule{.ps.gz}{eps}{.ps.bb}{`zcat #1}|\\
-the final argument causes dvips to use the |zcat| command to unzip the
-file before inserting it into the PostScript output.
-
-Note that \LaTeX\ will find the graphics file by searching along
-TEXINPUTS (and possibly other places, as specified with
-|\graphicspath|) however it may be that the command you specify
-in this argument can not find such files unless they are in the
-current directory. On some systems it may be possible to modify
-the command so that it will find any files that \LaTeX\ can find.
-For example on newer web2c \TeX\ releases on unix, one may modify the
-above command so that the last argument is:\\
-|{`zcat `kpsewhich -n latex tex #1`}|\\
-which incantation causes the |kpsewhich| program to find the
-file, by searching along \LaTeX's path, and then pass the full path
-name to the |zcat| program so that it can uncompress the file.
-Any such uses are very system dependent, and would best be placed in 
-a |graphics.cfg| file, thus keeping the document itself portable.
-
-\subsection{Global setting of keys}
-
-Most of the \package{keyval} keys used in the \package{graphicx} package
-may also be set using the command |\setkeys| provided by the
-\package{keyval} package.%
-\footnote{\texttt{clip}, \texttt{scale} and \texttt{angle} may not be set via
-\texttt{\string\setkeys} prior to calling
-\texttt{\string\includegraphics}.}
-
-For instance, suppose you wanted all the files to be included in the
-current document to be scaled to 75\% of the width of the lines of text,
-then one could issue the following command:\\
-|\setkeys{Gin}{width=0.75\textwidth}|\\
-Here `|Gin|' is the name used for the \package{keyval} keys associated
-with `Graphics inclusion'. All following
-|\includegraphics| commands (within the same group or environment) will
-act as if |[width=0.75\textwidth]| had been specified, in addition to
-any other key settings actually given in the optional argument.
-
-Similarly to make all |\rotatebox| arguments take an argument in
-radians, one just needs to specify:\\
-|\setkeys{Grot}{units=6.28318}|
-
-\subsection{Compatibility between \package{graphics} and
-  \package{graphicx}}
-
-For a document author, there are not really any problems of
-compatibility between the two packages. You just choose the interface
-that you personally prefer, and then use the appropriate package.
-
-For a package or class writer the situation is slightly
-different. Suppose that you are writing a letter class that needs to
-print a company logo as part of the letterhead.
-
-As the author of the class you may want to give the users the
-possibility of using  either interface in their letters (should they
-need to include any further graphics into the letter body). 
-In this case the class should load the \package{graphics} package (not
-\package{graphicx}, as this would commit any users of the class to the
-\package{keyval} interface). The logo should be included with
-|\includegraphics| either with \emph{no} optional argument (if the
-correct size information is in the file) or \emph{both} optional
-arguments otherwise. 
-Do not use the \emph{one} optional argument form, as the meaning of this
-argument would change (and generate errors) if the user were to load
-\package{graphicx} as well as your class.
-
-\section{Remaining packages in the graphics bundle}
-
-\subsection{Epsfig}
-This is a small package essentially a `wrapper' around the
-\package{graphicx} package, defining a command |\psfig| which has the
-syntax\\
-|\psfig{file=xxx,...}| rather than |\includegraphics[...]{xxx}|.\\
-It also has a few more commands to make it slightly more compatible with
-the old \LaTeX~2.09 style of the same name.
-
-\subsection{Rotating}
-An extension package to \package{graphicx}, mainly used for providing
-rotated float environments.
-
-\subsection{Trig}
-The trig package is not intended to be used directly in documents. It
-calculates sine, cosine and tangent trigonometric functions. These
-are used to calculate the space taken up by a rotated box. This
-package is also used by the |fontinst| program which converts
-PostScript files to a form usable by \TeX.
-
-As well as being used as a \LaTeX\ package, the macros may be extracted
-with the \package{docstrip} options \texttt{plain,package}. In this case
-the \LaTeX\ package declarations are omitted from the file, and the
-macros may be directly used as part of another macro file (they work
-with any format based on plain \TeX.)
-
-\subsection{Keyval}
-The \package{keyval} package is intended to be used by other
-packages. It provides a generic way of setting `keys' as used by the
-\package{graphicx} package, and splitting up the comma separated lists
-of \m{key}~=~\m{value} pairs.
-
-Like the \package{trig} package, these macros may be extracted and used
-as part of another macro file, based on plain \TeX, as well as the
-standard use as a \LaTeX\ package.
-
-By default an undeclared key will generate an error.
-If however the option  \texttt{unknownkeysallowed} is used, then
-unknown keys will be silently ignored (leaving a message in the log
-file). This option is also accepted by the \textsf{graphicx} package.
-
-\iffalse
-
-\subsection{Pstcol}
-\package{PSTricks}, by Timothy Van Zandt is an immensely powerful
-package that enables a very full featured interface between PostScript
-and \TeX. Unfortunately the colour support in \package{PSTricks} is
-slightly incompatible with the colour mechanism defined in the
-\package{color} package. The \package{pstcol} package is a (hopefully
-temporary) package that modifies a very small number of internal
-PSTricks functions, to remove this incompatibility. If
-\package{pstricks} is loaded via this package, you may use any colours
-defined by \package{color} package commands within \package{pstricks}
-commands, and vice versa.
-
-\fi
-
-\subsection{Lscape}
-The \package{lscape} package requires and takes the same options
-as the \package{graphics} package. It defines a |landscape| environment
-within which page bodies are rotated through 90 degrees. The page head
-and foot are not affected, they appear in the standard (portrait)
-position.
-\end{document}
diff --git a/Master/texmf-dist/doc/latex/graphics/keyval.pdf b/Master/texmf-dist/doc/latex/graphics/keyval.pdf
index 6c800658775..1098455bb7c 100644
--- a/Master/texmf-dist/doc/latex/graphics/keyval.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/keyval.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/lscape.pdf b/Master/texmf-dist/doc/latex/graphics/lscape.pdf
index 0d16d1cb835..f324f7074c1 100644
--- a/Master/texmf-dist/doc/latex/graphics/lscape.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/lscape.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/rotating.pdf b/Master/texmf-dist/doc/latex/graphics/rotating.pdf
index 13a5fbd8121..43355306b1c 100644
--- a/Master/texmf-dist/doc/latex/graphics/rotating.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/rotating.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/rotex.pdf b/Master/texmf-dist/doc/latex/graphics/rotex.pdf
index 397b1b58d70..f7f946ef21a 100644
--- a/Master/texmf-dist/doc/latex/graphics/rotex.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/rotex.pdf
diff --git a/Master/texmf-dist/doc/latex/graphics/rotex.tex b/Master/texmf-dist/doc/latex/graphics/rotex.tex
deleted file mode 100644
index 9dabfd37f74..00000000000
--- a/Master/texmf-dist/doc/latex/graphics/rotex.tex
+++ /dev/null
@@ -1,500 +0,0 @@
-\errorcontextlines32
-\documentclass[twoside]{report}
-\usepackage[chatter]{rotating}
-\usepackage{fancyvrb}
-\makeatletter
-\newsavebox{\@display}
-\newcommand\@@Display[1]{%
- \sbox\@display{%
-  \begin{minipage}[b]{.45\textwidth}%
-  #1\end{minipage}%
- }\raisebox{\depth}{\usebox{\@display}}%
-}
-
-\newcommand\@@VDisplay[1]{%
- \sbox\@display{%
-   \begin{minipage}[b]{.45\textwidth}%
-     \BVerbatimInput[fontsize=\small]{#1}%
-   \end{minipage}}%
-   \usebox{\@display}%
-}
-\newcommand\SideBySide[2]{%
-\bgroup\def\baselinestretch{1}%
- \trivlist\item[]%
- \leavevmode
- \makebox[\textwidth][l]{\@@Display{#1}\hspace{1em}%
-                             \@@VDisplay{#2}}%
- \endtrivlist
- \egroup
-}
-\newcommand\BeginExample{%
-  \nobreak
-  \VerbatimEnvironment
-  \catcode`\<=12
-  \begin{VerbatimOut}{\jobname.ex}%
-}
-\newcommand{\EndExample}{\end{VerbatimOut}}
-
-\newenvironment{example}
- {\nobreak
-  \VerbatimEnvironment
-  \catcode`\<=12
-  \begin{VerbatimOut}{\jobname.ex}%
- }
- {\end{VerbatimOut}
-  \SideBySide {\input{\jobname.ex}}%
-                {\jobname.ex}}
-\makeatother
-%-------------------------------------------------------
-\def\degrees{{\small$^{\mathrm{o}}$}}
-%-------------------------------------------------------
-
-\begin{document}
-
-\title{Test of `rotating' package}
-\author{Sebastian Rahtz and Leonor Barroca\thanks{Now maintained as part of the \LaTeX\ graphics bundle.}}
-\date{November 19th 1994\thanks{Updated for graphics bundle 2016/05/22}}
-\maketitle
-
-`Rotating' provides a generalised rotation environment, where the text
-will be rotated (anti-clockwise) by the number of degrees specified as
-a parameter to the environment, but no special arrangement is made to
-find space for the result.
-
-\begin{example}
-Start here
-\begin{rotate}{-56}
-Save whales
-\end{rotate}
-End here
-\end{example}
-
-A complete example of rotating text without leaving space
-would the `Save the whale' text
-written at 10 degree intervals round the compass. We use
-`rlap' to ensure that all the texts are printed at the same point.
-Just to show that \TeX\ can handle PostScript muckings-about
-properly\ldots
-\begin{example} 
-\newcount\wang
-\newsavebox{\wangtext}
-\newdimen\wangspace
-\def\wheel#1{\savebox{\wangtext}{#1}%
-\wangspace\wd\wangtext
-\advance\wangspace by 1cm%
-\centerline{%
-\rule{0pt}{\wangspace}%
-\rule[-\wangspace]{0pt}{\wangspace}%
-\wang=-180\loop\ifnum\wang<180
-\rlap{\begin{rotate}{\the\wang}%
-\rule{1cm}{0pt}#1\end{rotate}}%
-\advance\wang by 10\repeat}}
-\wheel{Save the whale}
-\end{example}
-
-If the user
-desires \LaTeX\ to leave space for the rotated box, then `turn' is used:
-\begin{example}
- Start here \begin{turn}{56}%
-   Save the whale
-  \end{turn} end here
-\end{example}
-The environment `Sideways' is a  special case, setting the rotation to $-90$,
-and leaving the correct space for the rotated box. 
-\begin{example}
-Start here
-\begin{sideways}%
-Save the whale
-\end{sideways}
-End here
-\end{example}
-
-If you deal with whole paragraphs of text, you realize that \TeX\
-boxes are not as simple as they sometimes look: they have a height
-{\em and} a depth. So when you rotate, you rotate about the point on
-the left-hand edge of the box that meets the baseline. The results can
-be unexpected, as shown in the full set of  paragraph rotations in
-Figures \ref{angles1} and \ref{angles2}. If you really want to turn a
-paragraph so that it appears to rotate about the {\em real} bottom of
-the \TeX\ box,
-you have to adjust the box in the normal \LaTeX\ way:
-\begin{example}
-\newsavebox{\foo}
-\savebox{\foo}{\parbox{1in}{Save 
-the whales Save the whale 
-Save the whale 
-Save the whale}}%
-Start
-\begin{turn}{45}\usebox{\foo}\end{turn}
-End
-\end{example}
-\begin{example}
-\savebox{\foo}{\parbox[b]{1in}{Save 
-the whales Save the whale 
-Save the whale 
-Save the whale}}%
-Start
-\begin{turn}{45}\usebox{\foo}\end{turn}
-End
-\end{example}
-
-\def\testrot#1{%
-\savebox{\foo}{\parbox{1in}{Save 
-the whales Save the whale Save the whale Save the whale}}%
-\framebox{---\begin{turn}{#1}\framebox{\usebox{\foo}}\end{turn}---}}%
-
-\begin{figure*}
-\begin{tabular}{|c|c|c|}
-\hline
-\testrot{0} &\testrot{-40}&\testrot{-80}\\
-0\degrees & -40\degrees & -80\degrees \\
-\hline
-\testrot{-120}&\testrot{-160}&\testrot{-200}\\
-120\degrees & -160\degrees & -200\degrees \\
-\hline
-\testrot{-240}&\testrot{-280}&\testrot{-320}\\
--240\degrees & -280\degrees & -320\degrees \\
-\hline
-\end{tabular}
-\caption{Rotation of paragraphs between 0 and -320 degrees \label{angles1}}
-\end{figure*}
-
-\begin{figure*}
-\begin{tabular}{|c|c|c|}
-\hline
-\testrot{-180} &\testrot{40}&\testrot{80}\\
--180\degrees & 40\degrees & 80\degrees \\
-\hline
-\testrot{120}&\testrot{160}&\testrot{200}\\
-120\degrees & 160\degrees & 200\degrees \\
-\hline
-\testrot{240}&\testrot{280}&\testrot{320}\\
-240\degrees & 280\degrees & 320\degrees \\
-\hline
-\end{tabular}
-\caption{Rotation of paragraphs between 0 and 320 degrees\label{angles2}}
-\end{figure*}
-
-
-We can set tabular material in this way; at the same time, we
-demonstrate that the rotation can be nested:
-\begin{example}
-\begin{sideways}
-\rule{1in}{0pt}
-\begin{tabular}{|lr|}
-\em Word & \begin{rotate}{90}%
-Occurrences\end{rotate}
-\\
-\hline
-hello & 33\\
-goodbye & 34\\
-\hline
-\end{tabular}
-\end{sideways}
-\end{example}
-
-\begin{example}
-\begin{quote}
-\rule{0pt}{1.5in}\begin{tabular}{rrr}
-\begin{rotate}{45}Column 1\end{rotate}&
-\begin{rotate}{45}Column 2\end{rotate}&
-\begin{rotate}{45}Column 3\end{rotate}\\
-\hline
-1& 2& 3\\
-4& 5& 6\\
-7& 8& 9\\
-\hline
-\end{tabular}
-\end{quote}
-\end{example}
-
-\begin{example}
-\begin{quote}
-\begin{tabular}{rrr}
-\begin{turn}{45}Column 1\end{turn}&
-\begin{turn}{45}Column 2\end{turn}&
-\begin{turn}{45}Column 3\end{turn}\\
-\hline
-1& 2& 3\\
-4& 5& 6\\
-7& 8& 9\\
-\hline
-\end{tabular}
-\end{quote}
-\end{example}
-
-\begin{example}
-\begin{quote}
-\rule{0pt}{1.5in}\begin{tabular}{rrr}
-\begin{rotate}{45}Column 1\end{rotate}
-\rule{.5cm}{0pt}&
-\begin{rotate}{45}Column 2\end{rotate}
-\rule{.5cm}{0pt}&
-\begin{rotate}{45}Column 3\end{rotate}
-\rule{.5cm}{0pt}\\
-\hline
-1& 2& 3\\
-4& 5& 6\\
-7& 8& 9\\
-\hline
-\end{tabular}
-\end{quote}
-\end{example}
-
-\begin{example}
-\begin{sideways}
-\begin{tabular}{|l|c|c|c|c|c|p{1in}|}
-\hline
-&&\multicolumn{4}{c}{NUMBER OF SITES}\vline &ACCEPT or\\
-\cline{3-6} &STUDY AREA&&\multicolumn{3}{c}{%
-IN BOUNDARY ZONE}\vline&REJECT\\
-\cline{4-6}&&&&\multicolumn{2}{c}{EXPECTED}
-\vline&NULL\\
-\cline{5-6}&&TOT&OBS&FROM&TO&HYPOTH\\
-\cline{2-7}
-&FULL SAMPLE&41&31&10.3&27.0&REJECT\\
-&SAMPLE AREA 1&23&16&4.3&16.7&ACCEPT\\
-&SAMPLE AREA 2&18&15&2.8&13.7&REJECT\\
-&RUSHEN&13&9&1.2&10.4&ACCEPT\\
-&ARBORY&10&7&0.6&8.8&ACCEPT\\
-&MAROWN&10&8&0.4&8.6&ACCEPT\\
-\rule{0.5cm}{0pt}
-\begin{rotate}{90}PRIMARY UNITS%
-\end{rotate}\rule{0.5cm}{0pt}
-&SANTON&8&7&0.0&7.3&ACCEPT\\
-\hline
-\end{tabular}
-\end{sideways}
-\end{example}
-
-If you are interested in setting rotated material in tables or
-figures, this presents no problem. Figure \ref{fig1} shows how
-PostScript files which are being incorporated using can be
-rotated at will, while Figure \ref{fig2} shows, in contrast, how
-`includegraphics' itself handles rotation. It is also possible to rotate the
-whole of the figure environment, including caption, 
-by using the `sidewaysfigure' ands `sidewaystable' environments
-in place of `figure' and `table'. 
-
-Sideways figures and tables always take up the whole page. They can be
-rotated so that the bottom ot the figures is on the left or the right;
-the default is to always turn to the right. If the `twoside' option
-has been given to the main document class, this package then starts
-rotating sideways figures according to the page number (this requires
-two passes through \LaTeX{} at least). If you want the `twoside'
-option, but want the figures always in one direction, use the
-`figuresright' or `riguresleft' options to `rotating'.
-
-The code used to produce figures
-\ref{rotfloat1}--\ref{rotfloat4} is as follows:
-\begin{description}
-
-\item[Figure \ref{rotfloat1}]
-{\small\begin{verbatim}
-\begin{sidewaystable}
-\centering
-\caption{This is a narrow  table, which should be centred vertically
-on the final page.\label{rotfloat1}}
-  \begin{tabular}{|ll|}
-\hline
-    a & b \\
-    c & d \\
-    e & f \\
-    g & h \\
-    i & j \\
-\hline
-  \end{tabular}
-\end{sidewaystable}
-\end{verbatim}
-}
-
-\item[Figure \ref{rotfloat2}]
-{\scriptsize\begin{verbatim}
-\begin{sidewaystable}
-\centering
-\begin{tabular}{|llllllllp{1in}lp{1in}|}
-\hline
-Context   &Length   &Breadth/   &Depth   &Profile   &Pottery   &Flint   &Animal   &Stone   &Other    &C14 Dates \\
-  &         &Diameter   &        &          &          &        & 
-Bones&&&\\
-\hline
-&&&&&&&&&&\\
-\multicolumn{10}{|l}{\bf Grooved Ware}&\\
-784       &---        &0.9m       &0.18m   &Sloping U &P1       &$\times$46  &  $\times$8      &&       $\times$2 bone&  2150$\pm$ 100 BC\\
-785       &---        &1.00m      &0.12    &Sloping U &P2--4    &$\times$23  &  $\times$21     & Hammerstone &---&---\\
-962       &---        &1.37m      &0.20m   &Sloping U &P5--6    &$\times$48  &  $\times$57*    & ---&     ---&1990 $\pm$ 80 BC (Layer 4) 1870 $\pm$90 BC (Layer 1)\\
-983       &0.83m      &0.73m      &0.25m   &Stepped U &---      &$\times$18  &  $\times$8      & ---& Fired clay&---\\
-&&&&&&&&&&\\
-\multicolumn{10}{|l}{\bf Beaker}&\\
-552       &---        &0.68m      &0.12m   &Saucer    &P7--14   &---           & ---       & ---       &---        &---\\
-790       &---        &0.60m      &0.25m   &U         &P15      &$\times$12    & ---       & Quartzite-lump&---    &---\\
-794       &2.89m      &0.75m      &0.25m   &Irreg.    &P16      &$\times$3     & ---       & ---       &---        &---\\
-\hline
-\end{tabular}
- 
-\caption[Grooved Ware and Beaker Features, their Finds and
-Radiocarbon Dates]{Grooved Ware and Beaker Features, their
-Finds and Radiocarbon Dates; For a breakdown of the Pottery
-Assemblages see Tables I and III; for
-the Flints see Tables II and IV; for the
-Animal Bones see Table V.}\label{rotfloat2}
-\end{sidewaystable}
-\end{verbatim}
-}
-
-\item[Figure \ref{rotfloat3}]
-{\small\begin{verbatim}
-\begin{table}
-\centering
-\rotcaption{Minimum number of individuals; effect of rotating table
-and caption separately}\label{rotfloat3}%
-\begin{sideways}
-\begin{tabular}[b]{cccccccccp{1cm}}
-\hline
-Phase&Total&Cattle&Sheep&Pig&Red Deer&Horse&Dog&Goat&Other\\
-\hline
-&1121&54&12&32&1&1&1&1&1 polecat\\
-3&8255&58&6&35&1&1&1&1&1 roe deer, 1 hare, 1 cat, 1 otter\\
-4&543&45&6&45&4&1&1&---&---\\
-\hline
-&9919&157&24&112&6&3&3&2&5\\
-\hline
-\end{tabular}
-\end{sideways}
-\end{table}
-\end{verbatim}
-}
-
-\item[Figure \ref{rotfloat4}]
-{\small\begin{verbatim}
-\begin{sidewaysfigure}
-  \centering
-  \includegraphics[width=.8\textheight,height=.4\textwidth]{cat}
-\caption{A pathetically squashed rotated pussycat}\label{rotfloat4}
-\end{sidewaysfigure}
-\end{verbatim}
-}
-\end{description}
-
-\begin{figure}
-\begin{example}
----\begin{turn}{156}
-\includegraphics[width=1in]{cat}
-\end{turn}---
-\end{example}
-
-\begin{example}
----\begin{sideways}
-\includegraphics[width=1in]{cat}
-\end{sideways}---
-\end{example}
-
-\begin{example}
----\includegraphics[width=1in]{cat}---
-\end{example}
-\caption{A normal, and sideways, pictures within a figure\label{fig1}}
-\end{figure}
-
-\begin{figure}
-\begin{example}
-\includegraphics[width=1in,%
-angle=-56]{cat}
-\end{example}
-
-\caption{Figures rotated with `includegraphics'\label{fig2}}
-\end{figure}
-\begin{sidewaystable}
-\centering
-\caption{This is a narrow  table, which should be centred vertically
-on the final page.\label{rotfloat1}}
-  \begin{tabular}{|ll|}
-\hline
-    a & b \\
-    c & d \\
-    e & f \\
-    g & h \\
-    i & j \\
-\hline
-  \end{tabular}
-\end{sidewaystable}
-
-
-
-\begin{sidewaystable}
-\centering
-\begin{tabular}{|llllllllp{1in}lp{1in}|}
-\hline
-Context   &Length   &Breadth/   &Depth   &Profile   &Pottery   &Flint   &Animal   &Stone   &Other    &C14 Dates \\
-  &         &Diameter   &        &          &          &        & 
-Bones&&&\\
-\hline
-&&&&&&&&&&\\
-\multicolumn{10}{|l}{\bf Grooved Ware}&\\
-784       &---        &0.9m       &0.18m   &Sloping U &P1       &$\times$46  &  $\times$8      &&       $\times$2 bone&  2150$\pm$ 100 BC\\
-785       &---        &1.00m      &0.12    &Sloping U &P2--4    &$\times$23  &  $\times$21     & Hammerstone &---&---\\
-962       &---        &1.37m      &0.20m   &Sloping U &P5--6    &$\times$48  &  $\times$57*    & ---&     ---&1990 $\pm$ 80 BC (Layer 4) 1870 $\pm$90 BC (Layer 1)\\
-983       &0.83m      &0.73m      &0.25m   &Stepped U &---      &$\times$18  &  $\times$8      & ---& Fired clay&---\\
-&&&&&&&&&&\\
-\multicolumn{10}{|l}{\bf Beaker}&\\
-552       &---        &0.68m      &0.12m   &Saucer    &P7--14   &---           & ---       & ---       &---        &---\\
-790       &---        &0.60m      &0.25m   &U         &P15      &$\times$12    & ---       & Quartzite-lump&---    &---\\
-794       &2.89m      &0.75m      &0.25m   &Irreg.    &P16      &$\times$3     & ---       & ---       &---        &---\\
-\hline
-\end{tabular}
- 
-\caption[Grooved Ware and Beaker Features, their Finds and
-Radiocarbon Dates]{Grooved Ware and Beaker Features, their
-Finds and Radiocarbon Dates; For a breakdown of the Pottery
-Assemblages see Tables I and III; for
-the Flints see Tables II and IV; for the
-Animal Bones see Table V.}\label{rotfloat2}
-\end{sidewaystable}
-
-\begin{table}
-\centering
-\hbox{
-\rotcaption{Minimum number of individuals; effect of rotating table
-and caption separately}\label{rotfloat3}%
-\begin{sideways}
-\begin{tabular}[t]{cccccccccp{1cm}}
-\hline
-Phase&Total&Cattle&Sheep&Pig&Red Deer&Horse&Dog&Goat&Other\\
-\hline
-&1121&54&12&32&1&1&1&1&1 polecat\\
-3&8255&58&6&35&1&1&1&1&1 roe deer, 1 hare, 1 cat, 1 otter\\
-4&543&45&6&45&4&1&1&---&---\\
-\hline
-&9919&157&24&112&6&3&3&2&5\\
-\hline
-\end{tabular}
-\end{sideways}
-}
-\end{table}
-
-
-\begin{sidewaysfigure}
-  \centerline{\includegraphics[width=.8\textheight,height=.4\textwidth]{cat}}
-\caption{A pathetically squashed rotated pussycat (1)}
-\end{sidewaysfigure}
-
-\begin{sidewaysfigure}
-  \centerline{\includegraphics[width=.8\textheight,height=.4\textwidth]{cat}}
-\caption{A pathetically squashed rotated pussycat (2)}
-\end{sidewaysfigure}
-
-\begin{sidewaysfigure}
-  \centerline{\includegraphics[width=.8\textheight,height=.4\textwidth]{cat}}
-\caption{A pathetically squashed rotated pussycat (3)}
-\end{sidewaysfigure}
-
-\begin{sidewaysfigure}
-  \centerline{\includegraphics[width=.8\textheight,height=.4\textwidth]{cat}}
-\caption{A pathetically squashed rotated pussycat (4)}
-\end{sidewaysfigure}
-
-\begin{sidewaysfigure}
-  \centerline{\includegraphics[width=.8\textheight,height=.4\textwidth]{cat}}
-\caption{A pathetically squashed rotated pussycat}\label{rotfloat4}
-\end{sidewaysfigure}
-
-\end{document}
diff --git a/Master/texmf-dist/doc/latex/graphics/trig.pdf b/Master/texmf-dist/doc/latex/graphics/trig.pdf
index 37250b2db94..401775fad08 100644
--- a/Master/texmf-dist/doc/latex/graphics/trig.pdf
+++ b/Master/texmf-dist/doc/latex/graphics/trig.pdf