asaetr pdf doc, and keep variant cmcscsl10 in doc dir (29apr09)

git-svn-id: svn://tug.org/texlive/trunk@12877 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 158 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/asaetr/MANIFEST b/Master/texmf-dist/doc/latex/asaetr/MANIFEST
new file mode 100644
index 00000000000..49bdb566a0d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/asaetr/MANIFEST
@@ -0,0 +1,31 @@
+Announcing ASAETR 1.0, a set of LaTeX and BibTeX styles, with documentation,
+to make your articles look like those in Transactions of the American Society 
+of Agricultural Engineers. This is a vast improvement over ASAETR 0.9,
+which was released in Dec 90.  Enjoy.
+
+MANIFEST:
+20142 	asaetr.sty 	LaTeX style for ASAE TRANSACTIONS
+2050 	asaesub.sty 	style used w/ asaetr.sty to meet submission guidelines
+23037 	asaetr.bst	BibTeX style for ASAE articles
+10413 	asaetr.tex	Documentation
+128140 	asaetr.ps	PostScript version of documentation
+384 	asaetr.bib	BibTeX database used for documentation
+5416 	cmcscsl10.mf	METAFONT source for slanted, small caps font
+
+If you need a pk/tfm for the above font, let me know.
+
+James Darrell McCauley 
+
+Until 14 Feb 1992:
+Graduate Research Assistant 
+Spatial Analysis Laboratory
+Department of Agricultural Engineering 
+Texas A&M University 
+College Station, TX 77843-2117, USA
+(Darrell.McCauley@tamu.edu, jdm5548@tamagen.bitnet)
+
+After 17 Feb 1992:
+USDA Fellow
+Department of Agricultural Engineering 
+Purdue University
+West Lafayette, IN 47907-1146, USA
diff --git a/Master/texmf-dist/doc/latex/asaetr/asaetr.bib b/Master/texmf-dist/doc/latex/asaetr/asaetr.bib
new file mode 100644
index 00000000000..1ed6d6ef1b9
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/asaetr/asaetr.bib
@@ -0,0 +1,16 @@
+@book {  ll:86 ,
+author = "Leslie Lamport" ,
+title = "\LaTeX: A Document Preparation System" ,
+publisher = "Addison--Wesley Pub.\ Co." ,
+year = "1986" ,
+address = "Reading, MA" ,
+}
+
+@article {  asaeins ,
+author = "{ASAE}" ,
+title = "Instructions to Authors of {ASAE} Technical Publications" ,
+journal = "Transactions of the {ASAE}" ,
+year = "1990" ,
+volume = "33" ,
+number = "4" ,
+}
diff --git a/Master/texmf-dist/doc/latex/asaetr/asaetr.dvi b/Master/texmf-dist/doc/latex/asaetr/asaetr.dvi
deleted file mode 100644
index 6b7fb55288d..00000000000
--- a/Master/texmf-dist/doc/latex/asaetr/asaetr.dvi
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/asaetr/asaetr.pdf b/Master/texmf-dist/doc/latex/asaetr/asaetr.pdf
new file mode 100644
index 00000000000..8fcee0d0ac4
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/asaetr/asaetr.pdf
diff --git a/Master/texmf-dist/doc/latex/asaetr/cmcscsl10.mf b/Master/texmf-dist/doc/latex/asaetr/cmcscsl10.mf
new file mode 100644
index 00000000000..7452fb532e4
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/asaetr/cmcscsl10.mf
@@ -0,0 +1,111 @@
+%% Save file as: CMCSCSL10.MF                   Source: FILESERV@SHSU.BITNET
+% Computer Modern Roman Caps and Small Caps 10 point
+if unknown cmbase: input cmbase fi
+
+font_identifier:="CMCSC"; font_size 10pt#;
+
+% first come parameters used to set the uppercase letters
+% (including some for lowercase that aren't actually used)
+u#:=21/36pt#;      % unit width
+width_adj#:=0pt#;    % width adjustment for certain characters
+serif_fit#:=0pt#;    % extra sidebar near lowercase serifs
+cap_serif_fit#:=5/36pt#;  % extra sidebar near uppercase serifs
+letter_fit#:=5/36pt#;    % extra space added to all sidebars
+
+body_height#:=270/36pt#;  % height of tallest characters
+asc_height#:=250/36pt#;    % height of lowercase ascenders
+cap_height#:=246/36pt#;    % height of caps
+fig_height#:=232/36pt#;    % height of numerals
+x_height#:=155/36pt#;    % height of lowercase without ascenders
+math_axis#:=90/36pt#;    % axis of symmetry for math symbols
+bar_height#:=87/36pt#;    % height of crossbar in lowercase e
+comma_depth#:=70/36pt#;    % depth of comma below baseline
+desc_depth#:=70/36pt#;    % depth of lowercase descenders
+
+crisp#:=0pt#;      % diameter of serif corners
+tiny#:=8/36pt#;      % diameter of rounded corners
+fine#:=7/36pt#;      % diameter of sharply rounded corners
+thin_join#:=7/36pt#;    % width of extrafine details
+hair#:=9/36pt#;      % lowercase hairline breadth
+stem#:=25/36pt#;    % lowercase stem breadth
+curve#:=30/36pt#;    % lowercase curve breadth
+ess#:=27/36pt#;      % breadth in middle of lowercase s
+flare#:=33/36pt#;    % diameter of bulbs or breadth of terminals
+dot_size#:=38/36pt#;    % diameter of dots
+cap_hair#:=11/36pt#;    % uppercase hairline breadth
+cap_stem#:=32/36pt#;    % uppercase stem breadth
+cap_curve#:=37/36pt#;    % uppercase curve breadth
+cap_ess#:=35/36pt#;    % breadth in middle of uppercase s
+rule_thickness#:=.4pt#;    % thickness of lines in math symbols
+
+dish#:=1/36pt#;      % amount erased at top or bottom of serifs
+bracket#:=20/36pt#;    % vertical distance from serif base to tangent
+jut#:=28/36pt#;      % protrusion of lowercase serifs
+cap_jut#:=37/36pt#;    % protrusion of uppercase serifs
+beak_jut#:=10/36pt#;    % horizontal protrusion of beak serifs
+beak#:=70/36pt#;    % vertical protrusion of beak serifs
+vair#:=8/36pt#;      % vertical diameter of hairlines
+notch_cut#:=10pt#;    % maximum breadth above or below notches
+bar#:=11/36pt#;      % lowercase bar thickness
+slab#:=11/36pt#;    % serif and arm thickness
+cap_bar#:=11/36pt#;    % uppercase bar thickness
+cap_band#:=11/36pt#;    % uppercase thickness above/below lobes
+cap_notch_cut#:=10pt#;    % max breadth above/below uppercase notches
+serif_drop#:=4/36pt#;    % vertical drop of sloped serifs
+stem_corr#:=1/36pt#;    % for small refinements of stem breadth
+vair_corr#:=1/36pt#;    % for small refinements of hairline height
+apex_corr#:=0pt#;    % extra width at diagonal junctions
+
+o#:=8/36pt#;      % amount of overshoot for curves
+apex_o#:=8/36pt#;    % amount of overshoot for diagonal junctions
+
+slant:=1/4;      % tilt ratio $(\Delta x/\Delta y)$
+fudge:=1;      % factor applied to weights of heavy characters
+math_spread:=0;      % extra openness of math symbols
+superness:=1/sqrt2;    % parameter for superellipses
+superpull:=1/6;      % extra openness inside bowls
+beak_darkness:=11/30;    % fraction of triangle inside beak serifs
+ligs:=1;      % level of ligatures to be included
+
+square_dots:=false;    % should dots be square?
+hefty:=false;      % should we try hard not to be overweight?
+serifs:=true;      % should serifs and bulbs be attached?
+monospace:=false;    % should all characters have the same width?
+variant_g:=false;    % should an italic-style g be used?
+low_asterisk:=false;    % should the asterisk be centered at the axis?
+math_fitting:=false;    % should math-mode spacing be used?
+
+% now come replacements used to set the lowercase caps
+
+lower.u#:=16/36pt#;    % unit width
+lower.width_adj#:=0pt#;    % width adjustment for certain characters
+lower.cap_serif_fit#:=4/36pt#;  % extra sidebar near uppercase serifs
+lower.letter_fit#:=2.4/36pt#;  % extra space added to all sidebars
+
+lower.body_height#:=200/36pt#;  % height of tallest characters
+lower.cap_height#:=185/36pt#;  % height of caps
+lower.x_height#:=116/36pt#;  % height of lowercase without ascenders
+lower.bar_height#:=65/36pt#;  % height of crossbar in lowercase e
+lower.comma_depth#:=52/36pt#;  % depth of comma below baseline
+
+lower.flare#:=25/36pt#;    % diameter of bulbs or breadth of terminals
+lower.cap_hair#:=9.1/36pt#;  % uppercase hairline breadth
+lower.stem#:=21/36pt#;    % lowercase stem breadth
+lower.cap_stem#:=26/36pt#;  % uppercase stem breadth
+lower.cap_curve#:=31/36pt#;  % uppercase curve breadth
+lower.cap_ess#:=28/36pt#;  % breadth in middle of uppercase s
+
+lower.cap_jut#:=26/36pt#;  % protrusion of uppercase serifs
+lower.beak_jut#:=7/36pt#;  % horizontal protrusion of beak serifs
+lower.beak#:=52/36pt#;    % vertical protrusion of beak serifs
+lower.slab#:=9.1/36pt#;    % serif and arm thickness
+lower.cap_bar#:=9.1/36pt#;  % uppercase bar thickness
+lower.cap_band#:=9.1/36pt#;  % uppercase thickness above/below lobes
+lower.cap_notch_cut#:=10pt#;  % max breadth above/below uppercase notches
+
+lower.o#:=5/36pt#;    % amount of overshoot for curves
+lower.apex_o#:=4/36pt#;    % amount of overshoot for diagonal junctions
+
+lower.fudge:=1;      % factor applied to weights of heavy characters
+
+generate csc      % switch to the driver file