doc/latex

git-svn-id: svn://tug.org/texlive/trunk@84 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 275 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/acmconf/print.tex b/Master/texmf-dist/doc/latex/acmconf/print.tex
new file mode 100644
index 00000000000..c597dab8d4a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/acmconf/print.tex
@@ -0,0 +1,275 @@
+%%
+%% This is file `print.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% acmconf.dtx  (with options: `print,head,body')
+%% 
+%% IMPORTANT NOTICE:
+%% 
+%% For the copyright see the source file.
+%% 
+%% Any modified versions of this file must be renamed
+%% with new filenames distinct from print.tex.
+%% 
+%% For distribution of the original source see the terms
+%% for copying and modification in the file acmconf.dtx.
+%% 
+%% This generated file may be distributed as long as the
+%% original source files, as listed above, are part of the
+%% same distribution. (The sources need not necessarily be
+%% in the same archive or directory.)
+%%
+%% to test the checksum, uncomment    \OnlyDescription
+%% in the driver
+%%\fi
+%%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+
+
+\documentclass[print]{acmconf}
+\CopyrightText{\copyright ACM 2000, .....}
+\PublishedPageFrom{123}
+\PublishedPageTo{456}
+\IfFileExists{graphicx.sty}{\usepackage{graphicx}}{}
+\ConferenceName{1. Conference on Designing a \LaTeX2e Class for
+  Typesetting ACM Papers, Hawaii 2000}
+\ConferenceShortName{CONF-2000}
+
+\def\XX{More text should follow, but keep in mind that a limit of 6
+  pages has been set, including figures and references.  More text
+  should follow, but keep in mind that a limit of 6 pages has been
+  set, including figures and references.  More text should follow, but
+  keep in mind that a limit of 6 pages has been set, including figures
+  and references.  More text should follow, but keep in mind that a
+  limit of 6 pages has been set, including figures and references.
+  \par
+}
+
+\begin{document}
+\date{31. December 1999}
+\title{A New Intuitionistic Proof of Usability\\
+       of the Recommended Style File for the ACM Conference Papers}
+\author{\Author{J\"urgen Vollmer\thanks{Happy \LaTeX{}ing}}\\
+         \Address{Karlsruhe}\\
+         \Email{Juergen.Vollmer@acm.org}\\
+         \and
+         \Author{Mickey Mouse}\\
+         \Address{Enthausen University}\\
+         \Email{Mickey.Mouse@entenhausen.org}
+       }
+\maketitle
+
+\begin{abstract}
+  This document demonstrates how to use the \LaTeX2e \verb|acmconf|
+  class by exhibiting itself as an example.  You are expected to be
+  familiar with~\cite{Lam94}.  The best way to use this file is to use
+  it as a template, i.e., replace the prose in it by your
+  own\footnote{And may use footnotes.}.
+\end{abstract}
+
+\begin{keywords}
+\LaTeX2e-class, ACM proceedings
+\end{keywords}
+
+\section{Introduction}
+To understand this file read the \emph{source} and not the typeset
+version.  If you are reading this in the typeset version you might as
+well stop --- it is not supposed to make sense.
+
+\section{The Story Begins\ldots}
+A real article is supposed to have some deep results and good
+explanations.  That, however, is your job and not mine so you should
+replace this text with something more appropriate\footnote{Another a
+  footnote}..
+
+\section{Some often used \LaTeX\ commands}
+
+\subsection{\texttt{emph}, etc.}
+Text may be set as \emph{emph}.\\
+Text may be set as \texttt{texttt}.\\
+Text may be set as \underline{unterline}.\\
+Text may be set as \textbf{textbf}.\\
+Text may be set as \textrm{textrm}.\\
+Text may be set as {\tiny tiny}.\\
+Text may be set as {\scriptsize scriptsize}.\\
+Text may be set as {\footnotesize footnotesize}.\\
+Text may be set as {\normalfont normalsize}.\\
+Text may be set as {\large large}.\\
+Text may be set as {\Large Large}.\\
+Text may be set as {\LARGE LARGE}.\\
+Text may be set as {\huge huge}.\\
+Text may be set as {\Huge Huge}.\\
+Text may have$^{\textrm{super}}$ and$_{\textrm{sub}}$scripts.
+
+\subsection{\texttt{itemize}}
+\begin{itemize}
+\item More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\item More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\end{itemize}
+
+\subsection{\texttt{enumerate}}
+\begin{enumerate}
+\item More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\item More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\end{enumerate}
+
+\subsection{\texttt{description}}
+\begin{description}
+\item[Foo] More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\item[Bar] More text should follow, but keep in mind that a limit of 6
+     pages has been set, including figures and references.  More text
+     should follow, but keep in mind that a limit of 6 pages has been
+     set, including figures and references.
+\end{description}
+
+\subsection{\texttt{center} and \texttt{tabular}}
+\begin{center}
+\begin{tabular}{|l|c|r|}\hline
+left     & center   & right    \\\hline\hline
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\\cline{3-3}
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\\cline{2-2}
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\\cline{1-2}
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\\hline
+AAAAAAAA & BBBBBBBB & CCCCCCCC \\\hline
+1          & \multicolumn{2}{|c|}{2} \\\hline
+\end{tabular}
+\end{center}
+
+\subsection{\texttt{figure} and Postscript pictures}
+Have a look to to figure~\ref{fig-1} and~\ref{fig-2}.
+
+\begin{figure}
+\hrule
+Nice Postscript, isn't it?
+\begin{center}
+\IfFileExists{graphicx.sty}{
+  \includegraphics{body.eps}
+}{
+  Sorry, package \texttt{graphicx} not present.
+}
+\end{center}
+
+Same, a little bit smaller:
+\begin{center}
+\IfFileExists{graphicx.sty}{
+  \includegraphics[scale=.5]{body.eps}
+  }{
+  Sorry, package \texttt{graphicx} not present.
+}
+\end{center}
+\caption{\label{fig-1}This is a nice floating figure}
+\hrule
+\end{figure}
+
+\begin{figure*}
+\hrule
+This figure uses both columns, using \texttt{figure*}
+\begin{center}
+\IfFileExists{graphicx.sty}{
+  \includegraphics[scale=.5]{body.eps}
+  \hspace{1cm}
+  \includegraphics[scale=.5]{body.eps}
+}{
+  Sorry, package \texttt{graphicx} not present.
+}
+\end{center}
+\caption{\label{fig-2}This is a nice floating figure}
+\hrule
+\end{figure*}
+
+\section{The Story Continues 1}
+
+This is a \verb+\section+.
+
+\XX\XX
+
+\subsection{The Story Continues 2}
+
+This is a \verb+\subsection+.
+
+\XX\XX
+
+\subsubsection{The Story Continues 3}
+
+This is a \verb+\subsubsection+.
+
+\XX\XX
+
+\subsubsubsection{The Story Continues 4}
+
+This is a \verb+\subsubsubsection+.
+
+\XX\XX
+
+\subsubsubsubsection{The Story Continues 5}
+
+This is a \verb+\subsubsubsubsection+.
+
+\XX\XX
+
+\paragraph{The Story Continues 6}
+
+This is a \verb+\paragraph+.
+\XX\XX
+
+\subparagraph{The Story Continues 7}
+This is a \verb+\subparagraph+.
+\XX\XX\XX
+
+\section{Conclusion}
+The end, at last!  In this example there really are no results or
+points to summarize but I trust your article has more food for though
+and thus will need a conclusion.
+
+\appendix
+\section{Appendices}
+If you have any, appendices might go here.  Note that appendices
+should not be used to circumvent the word count limit.
+
+This is "doing it by hand" --- you might be better off using BibTeX.
+
+\begin{thebibliography}{X}
+\bibitem[1]{Lam94} Leslie Lamport: {\em \LaTeX, A Document
+    Preparation System,} Addison Wesley~1994.
+\end{thebibliography}
+\IfPrepare{
+  \tableofcontents
+  \listoffigures
+  \listoftables
+}{}
+\end{document}
+\endinput
+%%
+%% End of file `print.tex'.