diff options
author | Karl Berry <karl@freefriends.org> | 2015-08-27 22:01:39 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2015-08-27 22:01:39 +0000 |
commit | 7eb5047990feee3545abafcc60bae22fad6f1927 (patch) | |
tree | ef619a5e28e7215a5ab465a7647fa301245e2097 /Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex | |
parent | ed0cc62be17e1bf2b0a072cf59cc8d49e9c02e4a (diff) |
IEEEtran (27aug15)
git-svn-id: svn://tug.org/texlive/trunk@38220 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex')
-rw-r--r-- | Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex | 102 |
1 files changed, 48 insertions, 54 deletions
diff --git a/Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex b/Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex index e7b2a990d56..300ad00c0d8 100644 --- a/Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex +++ b/Master/texmf-dist/doc/latex/IEEEtran/bare_jrnl.tex @@ -1,18 +1,18 @@ %% bare_jrnl.tex -%% V1.4a -%% 2014/09/17 +%% V1.4b +%% 2015/08/26 %% by Michael Shell %% see http://www.michaelshell.org/ %% for current contact information. %% %% This is a skeleton file demonstrating the use of IEEEtran.cls -%% (requires IEEEtran.cls version 1.8a or later) with an IEEE +%% (requires IEEEtran.cls version 1.8b or later) with an IEEE %% journal paper. %% %% Support sites: %% http://www.michaelshell.org/tex/ieeetran/ -%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% http://www.ctan.org/pkg/ieeetran %% and %% http://www.ieee.org/ @@ -22,7 +22,7 @@ %% implied; without even the implied warranty of MERCHANTABILITY or %% FITNESS FOR A PARTICULAR PURPOSE! %% User assumes all risk. -%% In no event shall IEEE or any contributor to this code be liable for +%% In no event shall the IEEE or any contributor to this code be liable for %% any damages or losses, including, but not limited to, incidental, %% consequential, or any other damages, resulting from the use or misuse %% of any information contained here. @@ -38,16 +38,12 @@ %% Retain all contribution notices and credits. %% ** Modified files should be clearly indicated as such, including ** %% ** renaming them and changing author support contact information. ** -%% -%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, -%% bare_conf.tex, bare_jrnl.tex, bare_conf_compsoc.tex, -%% bare_jrnl_compsoc.tex, bare_jrnl_transmag.tex %%************************************************************************* % *** Authors should verify (and, if needed, correct) their LaTeX system *** % *** with the testflow diagnostic prior to trusting their LaTeX platform *** -% *** with production work. IEEE's font choices and paper sizes can *** +% *** with production work. The IEEE's font choices and paper sizes can *** % *** trigger bugs that do not appear when using other class files. *** *** % The testflow support page is at: % http://www.michaelshell.org/tex/testflow/ @@ -80,7 +76,7 @@ % % dvi code % \fi % The latest version of ifpdf.sty can be obtained from: -% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% http://www.ctan.org/pkg/ifpdf % Also, note that IEEEtran.cls V1.7 and later provides a builtin % \ifCLASSINFOpdf conditional that works the same way. % When switching from latex to pdflatex and vice-versa, the compiler may @@ -96,7 +92,7 @@ %\usepackage{cite} % cite.sty was written by Donald Arseneau % V1.6 and later of IEEEtran pre-defines the format of the cite.sty package -% \cite{} output to follow that of IEEE. Loading the cite package will +% \cite{} output to follow that of the IEEE. Loading the cite package will % result in citation numbers being automatically sorted and properly % "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using % cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's @@ -106,7 +102,7 @@ % cite.sty is already installed on most LaTeX systems. Be sure and use % version 5.0 (2009-03-20) and later if using hyperref.sty. % The latest version can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% http://www.ctan.org/pkg/cite % The documentation is contained in the cite.sty file itself. @@ -138,16 +134,16 @@ % required if you want graphics, photos, etc. graphicx.sty is already % installed on most LaTeX systems. The latest version and documentation % can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% http://www.ctan.org/pkg/graphicx % Another good source of documentation is "Using Imported Graphics in % LaTeX2e" by Keith Reckdahl which can be found at: -% http://www.ctan.org/tex-archive/info/epslatex/ +% http://www.ctan.org/pkg/epslatex % % latex, and pdflatex in dvi mode, support graphics in encapsulated % postscript (.eps) format. pdflatex in pdf mode supports graphics % in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure % that all non-photo figures use a vector format (.eps, .pdf, .mps) and -% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats % which can result in "jaggedy"/blurry rendering of lines and letters as % well as large increases in file sizes. % @@ -160,22 +156,17 @@ % *** MATH PACKAGES *** % -%\usepackage[cmex10]{amsmath} +%\usepackage{amsmath} % A popular package from the American Mathematical Society that provides -% many useful and powerful commands for dealing with mathematics. If using -% it, be sure to load this package with the cmex10 option to ensure that -% only type 1 fonts will utilized at all point sizes. Without this option, -% it is possible that some math symbols, particularly those within -% footnotes, will be rendered in bitmap form which will result in a -% document that can not be IEEE Xplore compliant! +% many useful and powerful commands for dealing with mathematics. % -% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% Note that the amsmath package sets \interdisplaylinepenalty to 10000 % thus preventing page breaks from occurring within multiline equations. Use: %\interdisplaylinepenalty=2500 % after loading amsmath to restore such page breaks as IEEEtran.cls normally % does. amsmath.sty is already installed on most LaTeX systems. The latest % version and documentation can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ +% http://www.ctan.org/pkg/amsmath @@ -189,16 +180,14 @@ % You can use the algorithmic environment in-text or within a figure % environment to provide for a floating algorithm. Do NOT use the algorithm % floating environment provided by algorithm.sty (by the same authors) or -% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated % algorithm float types and packages that provide these will not provide % correct IEEE style captions. The latest version and documentation of % algorithmic.sty can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ -% There is also a support site at: -% http://algorithms.berlios.de/index.html +% http://www.ctan.org/pkg/algorithms % Also of interest may be the (relatively newer and more customizable) % algorithmicx.sty package by Szasz Janos: -% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ +% http://www.ctan.org/pkg/algorithmicx @@ -214,7 +203,7 @@ % advised to use an enhanced (at the very least that provided by array.sty) % set of table tools. array.sty is already installed on most systems. The % latest version and documentation can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/required/tools/ +% http://www.ctan.org/pkg/array % IEEEtran contains the IEEEeqnarray family of commands that can be used to @@ -245,7 +234,7 @@ % on whether compsoc mode has been enabled. % % The latest version and documentation of subfig.sty can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% http://www.ctan.org/pkg/subfig @@ -259,8 +248,13 @@ % LaTeX2e releases, the ordering of single and double column floats is not % guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a % single column figure to be placed prior to an earlier double column -% figure. The latest version and documentation can be found at: -% http://www.ctan.org/tex-archive/macros/latex/base/ +% figure. +% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's +% corrections already built into the system in which case a warning will +% be issued if an attempt is made to load fixltx2e.sty as it is no longer +% needed. +% The latest version and documentation can be found at: +% http://www.ctan.org/pkg/fixltx2e %\usepackage{stfloats} @@ -274,12 +268,12 @@ % which rewrites many portions of the LaTeX2e float routines. It may not work % with other packages that modify the LaTeX2e float routines. The latest % version and documentation can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ -% Do not use the stfloats baselinefloat ability as IEEE does not allow +% http://www.ctan.org/pkg/stfloats +% Do not use the stfloats baselinefloat ability as the IEEE does not allow % \baselineskip to stretch. Authors submitting work to the IEEE should note -% that IEEE rarely uses double column equations and that authors should try +% that the IEEE rarely uses double column equations and that authors should try % to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty -% packages (also by Sigitas Tolusis) as IEEE does not format its papers in +% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in % such ways. % Do not attempt to use stfloats with fixltx2e as they are incompatible. % Instead, use Morten Hogholm'a dblfloatfix which combines the features @@ -287,7 +281,7 @@ % % \usepackage{dblfloatfix} % The latest version can be found at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/dblfloatfix/ +% http://www.ctan.org/pkg/dblfloatfix @@ -324,7 +318,7 @@ % avoid the use of subfigure captions (many IEEE journals avoid them anyway) % and instead reference/explain all the subfigures within the main caption. % The latest version of endfloat.sty and its documentation can obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% http://www.ctan.org/pkg/endfloat % % The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used % later in the document, say, to conditionally put the References on a @@ -339,7 +333,7 @@ % url.sty was written by Donald Arseneau. It provides better support for % handling and breaking URLs. url.sty is already installed on most LaTeX % systems. The latest version and documentation can be obtained at: -% http://www.ctan.org/tex-archive/macros/latex/contrib/url/ +% http://www.ctan.org/pkg/url % Basically, \url{my_url_here}. @@ -364,7 +358,7 @@ % not capitalized unless they are the first or last word of the title. % Linebreaks \\ can be used within to get better formatting as desired. % Do not put math or special symbols in the title. -\title{Bare Demo of IEEEtran.cls for Journals} +\title{Bare Demo of IEEEtran.cls\\ for IEEE Journals} % % % author names and IEEE memberships @@ -379,11 +373,11 @@ \author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} John~Doe,~\IEEEmembership{Fellow,~OSA,} and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space -\thanks{M. Shell is with the Department +\thanks{M. Shell was with the Department of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space \thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space -\thanks{Manuscript received April 19, 2005; revised September 17, 2014.}} +\thanks{Manuscript received April 19, 2005; revised August 26, 2015.}} % note the % following the last \IEEEmembership and also \thanks - % these prevent an unwanted space from occurring between the last author name @@ -406,8 +400,8 @@ GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % % The paper headers -\markboth{Journal of \LaTeX\ Class Files,~Vol.~13, No.~9, September~2014}% -{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Journals} +\markboth{Journal of \LaTeX\ Class Files,~Vol.~14, No.~8, August~2015}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for IEEE Journals} % The only time the second header will appear is for the odd numbered pages % after the title page when using the twoside option. % @@ -421,7 +415,7 @@ GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % % If you want to put a publisher's ID mark on the page you can do it like % this: -%\IEEEpubid{0000--0000/00\$00.00~\copyright~2014 IEEE} +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2015 IEEE} % Remember, if you use this you must call \IEEEpubidadjcol in the second % column for its text to clear the IEEEpubid mark. @@ -444,7 +438,7 @@ The abstract goes here. % Note that keywords are not normally used for peerreview papers. \begin{IEEEkeywords} -IEEEtran, journal, \LaTeX, paper, template. +IEEE, IEEEtran, journal, \LaTeX, paper, template. \end{IEEEkeywords} @@ -472,7 +466,7 @@ IEEEtran, journal, \LaTeX, paper, template. % \IEEEPARstart{A}{demo} file is .... % % form to use if you need the single drop letter followed by -% normal text (unknown if ever used by IEEE): +% normal text (unknown if ever used by the IEEE): % \IEEEPARstart{A}{}demo file is .... % % Some journals put the first two words in caps: @@ -482,14 +476,14 @@ IEEEtran, journal, \LaTeX, paper, template. % and "HIS" in caps to complete the first word. \IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' for IEEE journal papers produced under \LaTeX\ using -IEEEtran.cls version 1.8a and later. +IEEEtran.cls version 1.8b and later. % You must have at least 2 lines in the paragraph with the drop letter % (should never be an issue) I wish you the best of success. \hfill mds -\hfill September 17, 2014 +\hfill August 26, 2015 \subsection{Subsection Heading Here} Subsection text here. @@ -524,7 +518,7 @@ Subsubsection text here. %\label{fig_sim} %\end{figure} -% Note that IEEE typically puts floats only at the top, even when this +% Note that the IEEE typically puts floats only at the top, even when this % results in a large percentage of a column being occupied by floats. @@ -562,7 +556,7 @@ Subsubsection text here. % such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to % and up, which are usually not capitalized unless they are the first or % last word of the caption. Table text will default to \footnotesize as -% IEEE normally uses this smaller font for tables. +% the IEEE normally uses this smaller font for tables. % The \label must come after \caption as always. % %\begin{table}[!t] @@ -657,7 +651,7 @@ The authors would like to thank... % can use a bibliography generated by BibTeX as a .bbl file % BibTeX documentation can be easily obtained at: -% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% http://mirror.ctan.org/biblio/bibtex/contrib/doc/ % The IEEEtran BibTeX style support page is at: % http://www.michaelshell.org/tex/ieeetran/bibtex/ %\bibliographystyle{IEEEtran} |