IEEEtran (2jan13)

git-svn-id: svn://tug.org/texlive/trunk@28697 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 86 insertions, 229 deletions

diff --git a/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex b/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex
index de97ffaad7f..7609665fcc6 100644
--- a/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex
+++ b/Master/texmf-dist/doc/latex/IEEEtran/bare_adv.tex
@@ -1,14 +1,14 @@
 
 %% bare_adv.tex
-%% V1.3
-%% 2007/01/11
+%% V1.4
+%% 2012/12/27
 %% by Michael Shell
 %% See: 
 %% http://www.michaelshell.org/
 %% for current contact information.
 %%
 %% This is a skeleton file demonstrating the advanced use of IEEEtran.cls
-%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer
+%% (requires IEEEtran.cls version 1.8 or later) with an IEEE Computer
 %% Society journal paper.
 %%
 %% Support sites:
@@ -41,7 +41,8 @@
 %% ** renaming them and changing author support contact information. **
 %%
 %% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
-%%                    bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%                    bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex,
+%%                    bare_jrnl_transmag.tex
 %%*************************************************************************
 
 % *** Authors should verify (and, if needed, correct) their LaTeX system  ***
@@ -139,7 +140,8 @@
 % "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
 % cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
 % \cite will automatically add leading space, if needed. Use cite.sty's
-% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off
+% such as if a citation ever needs to be enclosed in parenthesis.
 % cite.sty is already installed on most LaTeX systems. Be sure and use
 % version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
 % not currently provide for hyperlinked citations.
@@ -153,7 +155,9 @@
 % (e.g., [1]-[4]). Instead, they list every citation separately in order
 % (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite
 % package with the nocompress option which is supported by cite.sty v4.0
-% and later. Note also the use of a CLASSOPTION conditional provided by
+% and later.
+%
+% Note also the use of a CLASSOPTION conditional provided by 
 % IEEEtran.cls V1.7 and later.
 
 
@@ -182,12 +186,12 @@
 \fi
 % graphicx was written by David Carlisle and Sebastian Rahtz. It is
 % required if you want graphics, photos, etc. graphicx.sty is already
-% installed on most LaTeX systems. The latest version and documentation can
-% be obtained at: 
+% installed on most LaTeX systems. The latest version and documentation
+% can be obtained at: 
 % http://www.ctan.org/tex-archive/macros/latex/required/graphics/
 % Another good source of documentation is "Using Imported Graphics in
-% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
-% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+% LaTeX2e" by Keith Reckdahl which can be found at:
+% http://www.ctan.org/tex-archive/info/epslatex/
 %
 % latex, and pdflatex in dvi mode, support graphics in encapsulated
 % postscript (.eps) format. pdflatex in pdf mode supports graphics
@@ -202,120 +206,6 @@
 
 
 
-%\usepackage{ps4pdf}
-% dvi->ps workflow is required to use such packages as psfrag.sty and
-% pstricks.sty. However, Rolf Niepraschk's ps4pdf.sty provides a way to
-% apply psfrag/pstricks effects to .eps figures and then get the resultant
-% figures in .pdf form. Thus, providing an easier way for migrating from
-% .eps to .pdf figures. After ps4pdf.sty loads, if:
-% 1. producing .dvi output: the output file will consist ONLY of the
-%    figures (or other constructs encased within \PSforPDF commands)
-% 2. producing .pdf output: pdflatex will look in the filename-pics.pdf
-%    file, where filename is the basename of the tex document, for the
-%    graphics (or other constructs encased within \PSforPDF commands).
-%    NOTE: If you ever change your figures, you must remember to remake
-%    the filename-pics.pdf file.
-%
-% This way you can do a:
-% 
-% latex filename
-% dvips -Ppdf -o filename-pics.ps filename.dvi
-% ps2pdf filename-pics.ps filename-pics.pdf
-% 
-% to produce a filename-pics.pdf graphics container that contains
-% .pdf versions of the graphics with psfrag, pstricks, etc. features.
-% Note that you will not typically be able to view the figures in 
-% filename-pics.ps because of an offset. However, you will be able to
-% view them in filename-pics.pdf. Also, note that when ps4pdf is in effect
-% with .dvi output, you may get harmless over/under full box warnings - 
-% ignore them. 
-% Then, run pdflatex:
-% 
-% pdflatex filename
-% 
-% to use pdflatex to make PDF output, automatically using the figures in
-% filename-pics.pdf. Alternatively, you could use dvips -i option to
-% obtain separate .pdf files for each figure:
-%
-% dvips -Ppdf -i -E -o fig filename
-%
-% then convert each figure to pdf via a command such as epstopdf and then
-% use pdflatex with these pdf figures and then to dispense with ps4pdf.
-%
-% Remember to rerun through latex/dvips/ps2pdf if you ever change your
-% figures so that filename-pics.pdf gets updated.
-% ps4pdf requires David Kastrup's preview-latex and a recent LaTeX system
-% (circa 2001 or later). The ps4pdf package and documentation can be
-% obtained at: http://www.ctan.org/tex-archive/macros/latex/contrib/ps4pdf/
-% The preview-latex package and documentation can be obtained at:
-% http://www.ctan.org/tex-archive/macros/latex/contrib/preview/
-%
-% provide a bogus \PSforPDF, even when not loading pd4pdf. This way we can
-% stop loading ps4pdf.sty if we choose to make separate .pdf versions of
-% each of our figures.
-\providecommand{\PSforPDF}[1]{#1}
-% Note that in order for ps4pdf to work, all commands related to psfrag,
-% pstricks, etc. must be called within the PSforPDF command. This applies
-% even when *loading* via \usepackage psfrag.sty, etc.
-
-
-%\PSforPDF{\usepackage{psfrag}}
-% psfrag.sty was written by Craig Barratt, Michael C. Grant, and
-% David Carlisle. It allows you to substitute LaTeX commands for text in
-% imported EPS graphic files. In this way, LaTeX symbols can be placed into
-% graphics that have been generated by other applications. You must use
-% latex->dvips->ps2pdf workflow (not direct pdf output from pdflatex) if
-% you wish to use this capability because it works via some PostScript
-% tricks. Alternatively, the graphics could be processed as separate files
-% via psfrag and dvips, then converted to PDF for inclusion in the main file
-% which uses pdflatex. ps4pdf.sty (above) provides a way of doing this all
-% at once within the main file.
-% Docs are in "The PSfrag System" by Michael C. Grant and David Carlisle.
-% There is also some information about using psfrag in "Using Imported
-% Graphics in LaTeX2e" by Keith Reckdahl which documents the graphicx
-% package (see above). The psfrag package and documentation can be obtained
-% at: http://www.ctan.org/tex-archive/macros/latex/contrib/psfrag/
-% 
-% Note that the current version of psfrag does not "turn itself off" when
-% running under pdf output. This will result in a harmless warning
-% about a non-PDF \special. However, to silence this, a bogus psfrag
-% command can be provided instead of loading psfrag.sty when PDF output
-% is being used. Thus, a more complex alternative conditional loading scheme
-% can be employed instead of the straightforword way above:
-%
-%\ifCLASSINFOpdf
-% if outputting PDF, do not use or load psfrag.sty as current versions
-% output a non-PDF special that generates a harmless, but annoying warning.
-% Instead, we provide a bogus \psfrag command that does nothing with
-% its arguments. This is a tad tricky because \psfrag can have up to six
-% arguments four of which are optional: \psfrag{}[][][][]{}
-% Code based on that in psfrag.sty
-%\makeatletter
-%\def\psfrag{\@ifstar{\@BOGUSpsfraga}{\@BOGUSpsfraga}}
-%\def\@BOGUSpsfraga{\begingroup
-%   \@makeother\"\@makeother\*\@makeother\!\@makeother\~%
-%   \@makeother\:\@makeother\\\@makeother\%\@makeother\#%
-%   \@makeother\ \@BOGUSpsfragb}
-%\def\@BOGUSpsfragb#1{\endgroup
-%                \@ifnextchar [{\@BOGUSpsfragc}%
-%                              {\@BOGUSpsfrag}}
-%\def\@BOGUSpsfragc[#1]{\@ifnextchar [{\@BOGUSpsfragd}%
-%                                     {\@BOGUSpsfrag}}
-%\def\@BOGUSpsfragd[#1]{\@ifnextchar [{\@BOGUSpsfrage}%
-%                                     {\@BOGUSpsfrag}}
-%\def\@BOGUSpsfrage[#1]{\@ifnextchar [{\@BOGUSpsfragf}%
-%                                     {\@BOGUSpsfrag}}
-%\def\@BOGUSpsfragf[#1]{\@BOGUSpsfrag}
-%\def\@BOGUSpsfrag#1{\ignorespaces}
-%\makeatother
-%\else
-% using dvi output, load psfrag, but funnel it through PSforPDF
-% as required by ps4pdf.sty
-%\PSforPDF{\usepackage{psfrag}}
-%\fi
-
-
-
 
 
 % *** MATH PACKAGES ***
@@ -421,51 +311,28 @@
 
 
 
-
 % *** SUBFIGURE PACKAGES ***
 %\ifCLASSOPTIONcompsoc
-%\usepackage[tight,normalsize,sf,SF]{subfigure}
-%\else
-%\usepackage[tight,footnotesize]{subfigure}
-%\fi
-% subfigure.sty was written by Steven Douglas Cochran. This package makes it
-% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
-% work, it is a good idea to load it with the tight package option to reduce
-% the amount of white space around the subfigures. Computer Society papers
-% use a larger font and \sffamily font for their captions, hence the
-% additional options needed under compsoc mode. subfigure.sty is already
-% installed on most LaTeX systems. The latest version and documentation can
-% be obtained at:
-% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
-% subfigure.sty has been superceeded by subfig.sty.
-
-
-%\ifCLASSOPTIONcompsoc
-%  \usepackage[caption=false]{caption}
-%  \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig}
-%\else
-%  \usepackage[caption=false]{caption}
-%  \usepackage[font=footnotesize]{subfig}
-%\fi
-% subfig.sty, also written by Steven Douglas Cochran, is the modern
-% replacement for subfigure.sty. However, subfig.sty requires and
-% automatically loads Axel Sommerfeldt's caption.sty which will override
-% IEEEtran.cls handling of captions and this will result in nonIEEE style
-% figure/table captions. To prevent this problem, be sure and preload
-% caption.sty with its "caption=false" package option. This is will preserve
-% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later 
-% (recommended due to many improvements over 1.2) of subfig.sty supports
-% the caption=false option directly:
-%\ifCLASSOPTIONcompsoc
 %  \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
 %\else
 %  \usepackage[caption=false,font=footnotesize]{subfig}
 %\fi
-%
-% The latest version and documentation can be obtained at:
+% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
+% for subfigure.sty, the latter of which is no longer maintained and is
+% incompatible with some LaTeX packages including fixltx2e. However,
+% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
+% which will override IEEEtran.cls' handling of captions and this will result
+% in non-IEEE style figure/table captions. To prevent this problem, be sure
+% and invoke subfig.sty's "caption=false" package option (available since
+% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
+% handling of captions.
+% Note that the Computer Society format requires a larger sans serif font
+% than the serif footnote size font used in traditional IEEE formatting
+% and thus the need to invoke different subfig.sty package options depending
+% on whether compsoc mode has been enabled.
+%
+% The latest version and documentation of subfig.sty can be obtained at:
 % http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
-% The latest version and documentation of caption.sty can be obtained at:
-% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
 
 
 
@@ -495,13 +362,19 @@
 % with other packages that modify the LaTeX2e float routines. The latest
 % version and documentation can be obtained at:
 % http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
-% Documentation is contained in the stfloats.sty comments as well as in the
-% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
-% does not allow \baselineskip to stretch. Authors submitting work to the
-% IEEE should note that IEEE rarely uses double column equations and
-% that authors should try to avoid such use. Do not be tempted to use the
-% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
-% not format its papers in such ways.
+% Do not use the stfloats baselinefloat ability as IEEE does not allow
+% \baselineskip to stretch. Authors submitting work to the IEEE should note
+% that IEEE rarely uses double column equations and that authors should try
+% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
+% packages (also by Sigitas Tolusis) as IEEE does not format its papers in
+% such ways.
+% Do not attempt to use stfloats with fixltx2e as they are incompatible.
+% Instead, use Morten Hogholm'a dblfloatfix which combines the features
+% of both fixltx2e and stfloats:
+%
+% \usepackage{dblfloatfix}
+% The latest version can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/dblfloatfix/
 
 
 %\ifCLASSOPTIONcaptionsoff
@@ -509,17 +382,17 @@
 % \let\MYoriglatexcaption\caption
 % \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
 %\fi
-% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg.
-% This package may be useful when used in conjunction with IEEEtran.cls'
-% captionsoff option. Some IEEE journals/societies require that submissions
-% have lists of figures/tables at the end of the paper and that
+% endfloat.sty was written by James Darrell McCauley, Jeff Goldberg and 
+% Axel Sommerfeldt. This package may be useful when used in conjunction with 
+% IEEEtran.cls'  captionsoff option. Some IEEE journals/societies require that
+% submissions have lists of figures/tables at the end of the paper and that
 % figures/tables without any captions are placed on a page by themselves at
 % the end of the document. If needed, the draftcls IEEEtran class option or
 % \CLASSINPUTbaselinestretch interface can be used to increase the line
 % spacing as well. Be sure and use the nomarkers option of endfloat to
 % prevent endfloat from "marking" where the figures would have been placed
 % in the text. The two hack lines of code above are a slight modification of
-% that suggested by in the endfloat docs (section 8.3.1) to ensure that
+% that suggested by in the endfloat docs (section 8.4.1) to ensure that
 % the full captions always appear in the list of figures/tables - even if
 % the user used the short optional argument of \caption[]{}.
 % IEEE papers do not typically make use of \caption[]'s optional argument,
@@ -529,11 +402,8 @@
 % For subfig.sty:
 % \let\MYorigsubfloat\subfloat
 % \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
-% For subfigure.sty:
-% \let\MYorigsubfigure\subfigure
-% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}}
 % However, the above trick will not work if both optional arguments of
-% the \subfloat/subfig command are used. Furthermore, there needs to be a
+% the \subfloat command are used. Furthermore, there needs to be a
 % description of each subfigure *somewhere* and endfloat does not add
 % subfigure captions to its list of figures. Thus, the best approach is to
 % avoid the use of subfigure captions (many IEEE journals avoid them anyway)
@@ -554,10 +424,9 @@
 %\usepackage{url}
 % url.sty was written by Donald Arseneau. It provides better support for
 % handling and breaking URLs. url.sty is already installed on most LaTeX
-% systems. The latest version can be obtained at:
-% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
-% Read the url.sty source comments for usage information. Basically,
-% \url{my_url_here}.
+% systems. The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/url/
+% Basically, \url{my_url_here}.
 
 
 % NOTE: PDF thumbnail features are not required in IEEE papers
@@ -598,9 +467,6 @@
 % See the thumbpdf docs for details. The latest version and documentation
 % can be obtained at.
 % http://www.ctan.org/tex-archive/support/thumbpdf/
-% Be sure and use only version 3.8 (2005/07/06) or later of thumbpdf as
-% earlier versions will not work properly with recent versions of pdfTeX
-% (1.20a and later).
 
 
 % NOTE: PDF hyperlink and bookmark features are not required in IEEE
@@ -609,8 +475,7 @@
 % *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!!           ***
 \newcommand\MYhyperrefoptions{bookmarks=true,bookmarksnumbered=true,
 pdfpagemode={UseOutlines},plainpages=false,pdfpagelabels=true,
-colorlinks=true,linkcolor={black},citecolor={black},pagecolor={black},
-urlcolor={black},
+colorlinks=true,linkcolor={black},citecolor={black},urlcolor={black},
 pdftitle={Bare Demo of IEEEtran.cls for Computer Society Journals},%<!CHANGE!
 pdfsubject={Typesetting},%<!CHANGE!
 pdfauthor={Michael D. Shell},%<!CHANGE!
@@ -633,21 +498,17 @@ pdfkeywords={Computer Society, IEEEtran, journal, LaTeX, paper,
 % As most IEEE papers use URLs sparingly (mainly in the references), this
 % may not be as big an issue as with other publications.
 %
-% That said, recently Vilar Camara Neto introduced his breakurl.sty
-% package which permits hyperref to easily break URLs even in dvi
-% mode. Note that breakurl, unlike most other packages, must be loaded
+% That said, Vilar Camara Neto created his breakurl.sty package which
+% permits hyperref to easily break URLs even in dvi mode.
+% Note that breakurl, unlike most other packages, must be loaded
 % AFTER hyperref. The latest version of breakurl and its documentation can
 % be obtained at:
 % http://www.ctan.org/tex-archive/macros/latex/contrib/breakurl/
-% breakurl.sty is not for use under pdflatex pdf mode. Versions 1.10 
-% (September 23, 2005) and later are recommened to avoid bugs in earlier
-% releases.
+% breakurl.sty is not for use under pdflatex pdf mode.
 %
 % The advanced features offer by hyperref.sty are not required for IEEE
 % submission, so users should weigh these features against the added
-% complexity of use. Users who wish to use hyperref *must* ensure that
-% their hyperref version is 6.72u or later *and* IEEEtran.cls is version
-% 1.6b or later.
+% complexity of use.
 % The package options above demonstrate how to enable PDF bookmarks
 % (a type of table of contents viewable in Acrobat Reader) as well as
 % PDF document information (title, subject, author and keywords) that is
@@ -683,6 +544,7 @@ pdfkeywords={Computer Society, IEEEtran, journal, LaTeX, paper,
 %
 % paper title
 % can use linebreaks \\ within to get better formatting as desired
+% Do not put math or special symbols in the title.
 \title{Bare Advanced Demo of IEEEtran.cls\\ for Computer Society Journals}
 %
 %
@@ -717,7 +579,7 @@ GA, 30332.\protect\\
 % \\ is fragile and will error, could use \hfil\break instead.
 E-mail: see http://www.michaelshell.org/contact.html
 \IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
-\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}}
+\thanks{Manuscript received April 19, 2005; revised December 27, 2012.}}
 
 % note the % following the last \IEEEmembership and also \thanks - 
 % these prevent an unwanted space from occurring between the last author name
@@ -740,7 +602,7 @@ E-mail: see http://www.michaelshell.org/contact.html
 
 
 % The paper headers
-\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}%
+\markboth{Journal of \LaTeX\ Class Files,~Vol.~11, No.~4, December~2012}%
 {Shell \MakeLowercase{\textit{et al.}}: Bare Advanced Demo of IEEEtran.cls for Journals}
 % The only time the second header will appear is for the odd numbered pages
 % after the title page when using the twoside option.
@@ -758,12 +620,12 @@ E-mail: see http://www.michaelshell.org/contact.html
 % journals, the available text space is not reduced by their presence.
 % If you want to put a publisher's ID mark on the page you can do it like
 % this:
-%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE}
+%\IEEEpubid{0000--0000/00\$00.00~\copyright~2012 IEEE}
 % or like this to get the Computer Society new two part style.
-%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}%
+%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2012 IEEE}%
 %\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}}
 % Remember, if you use this you must call \IEEEpubidadjcol in the second
-% column for its text to clear the IEEEpubid mark (Computer Society jorunal
+% column for its text to clear the IEEEpubid mark (Computer Society journal
 % papers don't need this extra clearance.)
 
 
@@ -774,20 +636,14 @@ E-mail: see http://www.michaelshell.org/contact.html
 
 
 % for Computer Society papers, we must declare the abstract and index terms
-% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran
+% PRIOR to the title within the \IEEEtitleabstractindextext IEEEtran
 % command as these need to go into the title area created by \maketitle.
-\IEEEcompsoctitleabstractindextext{%
+% As a general rule, do not put math, special symbols or citations
+% in the abstract or keywords.
+\IEEEtitleabstractindextext{%
 \begin{abstract}
-%\boldmath
 The abstract goes here.
 \end{abstract}
-% IEEEtran.cls defaults to using nonbold math in the Abstract.
-% This preserves the distinction between vectors and scalars. However,
-% if the journal you are submitting to favors bold math in the abstract,
-% then you can use LaTeX's standard command \boldmath at the very start
-% of the abstract to achieve this. Many IEEE journals frown on math
-% in the abstract anyway. In particular, the Computer Society does
-% not want either math or citations to appear in the abstract.
 
 % Note that keywords are not normally used for peerreview papers.
 \begin{IEEEkeywords}
@@ -800,14 +656,14 @@ Computer Society, IEEEtran, journal, \LaTeX, paper, template.
 
 
 % To allow for easy dual compilation without having to reenter the
-% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will
+% abstract/keywords data, the \IEEEtitleabstractindextext text will
 % not be used in maketitle, but will appear (i.e., to be "transported")
-% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode
+% here as \IEEEdisplaynontitleabstractindextext when compsoc mode
 % is not selected <OR> if conference mode is selected - because compsoc
 % conference papers position the abstract like regular (non-compsoc)
 % papers do!
-\IEEEdisplaynotcompsoctitleabstractindextext
-% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using
+\IEEEdisplaynontitleabstractindextext
+% \IEEEdisplaynontitleabstractindextext has no effect when using
 % compsoc under a non-conference mode.
 
 
@@ -862,14 +718,14 @@ Computer Society, IEEEtran, journal, \LaTeX, paper, template.
 % and "HIS" in caps to complete the first word.
 \IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
 for IEEE Computer Society journal papers produced under \LaTeX\ using
-IEEEtran.cls version 1.7 and later.
+IEEEtran.cls version 1.8 and later.
 % You must have at least 2 lines in the paragraph with the drop letter
 % (should never be an issue)
 I wish you the best of success.
 
 \hfill mds
  
-\hfill January 11, 2007
+\hfill December 27, 2012
 
 \subsection{Subsection Heading Here}
 Subsection text here.
@@ -900,7 +756,7 @@ Subsubsection text here.
 % where an .eps filename suffix will be assumed under latex, 
 % and a .pdf suffix will be assumed for pdflatex; or what has been declared
 % via \DeclareGraphicsExtensions.
-%\caption{Simulation Results}
+%\caption{Simulation Results.}
 %\label{fig_sim}
 %\end{figure}
 
@@ -911,24 +767,25 @@ Subsubsection text here.
 
 % An example of a double column floating figure using two subfigures.
 % (The subfig.sty package must be loaded for this to work.)
-% The subfigure \label commands are set within each subfloat command, the
-% \label for the overall figure must come after \caption.
-% \hfil must be used as a separator to get equal spacing.
-% The subfigure.sty package works much the same way, except \subfigure is
-% used instead of \subfloat.
+% The subfigure \label commands are set within each subfloat command,
+% and the \label for the overall figure must come after \caption.
+% \hfil is used as a separator to get equal spacing.
+% Watch out that the combined width of all the subfigures on a 
+% line do not exceed the text width or a line break will occur.
 %
 %\begin{figure*}[!t]
-%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\centering
+%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
 %\label{fig_first_case}}
 %\hfil
-%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
-%\label{fig_second_case}}}
-%\caption{Simulation results}
+%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
+%\label{fig_second_case}}
+%\caption{Simulation results.}
 %\label{fig_sim}
 %\end{figure*}
 %
 % Note that often IEEE papers with subfigures do not employ subfigure
-% captions (using the optional argument to \subfloat), but instead will
+% captions (using the optional argument to \subfloat[]), but instead will
 % reference/describe all of them (a), (b), etc., within the main caption.
 
 
@@ -1060,7 +917,7 @@ H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus
 % \includegraphics command within an optional argument. (You could create
 % your own custom macro containing the \includegraphics command to make things
 % simpler here.)
-%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
+%\begin{IEEEbiography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
 % or if you just want to reserve a space for a photo:
 
 \begin{IEEEbiography}{Michael Shell}