summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/info/dvips.info
diff options
context:
space:
mode:
authorPeter Breitenlohner <peb@mppmu.mpg.de>2013-04-10 10:18:02 +0000
committerPeter Breitenlohner <peb@mppmu.mpg.de>2013-04-10 10:18:02 +0000
commitea9720f3384922282f5077e23739e32db0c41b2b (patch)
tree3de21e1170098d529044f4d2da5ab5020be4b12f /Master/texmf-dist/doc/info/dvips.info
parent7704860edb47bbd24279910a743ee799ad0beff2 (diff)
updated a few files generated from Build
git-svn-id: svn://tug.org/texlive/trunk@29821 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/info/dvips.info')
-rw-r--r--Master/texmf-dist/doc/info/dvips.info3113
1 files changed, 1506 insertions, 1607 deletions
diff --git a/Master/texmf-dist/doc/info/dvips.info b/Master/texmf-dist/doc/info/dvips.info
index fd8b2fac5ee..71a64d83ba0 100644
--- a/Master/texmf-dist/doc/info/dvips.info
+++ b/Master/texmf-dist/doc/info/dvips.info
@@ -1,10 +1,8 @@
-This is ../../../texk/dvipsk/dvips.info, produced by makeinfo version
-4.13 from ../../../texk/dvipsk/dvips.texi.
-
-This manual documents Dvips version 5.992 (May 2012), a program to
-translate a DVI file into PostScript. You may freely use, modify
-and/or distribute this file.
+This is dvips.info, produced by makeinfo version 5.1 from dvips.texi.
+This manual documents Dvips version 5.993 (April 2013), a program to
+translate a DVI file into PostScript. You may freely use, modify and/or
+distribute this file.
INFO-DIR-SECTION TeX
START-INFO-DIR-ENTRY
* DVI-to-Postscript: (dvips). Translating TeX DVI files to PostScript.
@@ -18,9 +16,9 @@ File: dvips.info, Node: Top, Next: Why Dvips, Up: (dir)
Dvips
*****
-This manual documents Dvips version 5.992 (May 2012), a program to
-translate a DVI file into PostScript. You may freely use, modify
-and/or distribute this file.
+This manual documents Dvips version 5.993 (April 2013), a program to
+translate a DVI file into PostScript. You may freely use, modify and/or
+distribute this file.
* Menu:
@@ -41,9 +39,9 @@ File: dvips.info, Node: Why Dvips, Next: Installation, Prev: Top, Up: Top
The Dvips program has a number of features that set it apart from other
PostScript drivers for TeX. This rather long section describes the
-advantages of using Dvips, and may be skipped if you are just
-interested in learning how to use the program. *Note Installation::,
-for details of compilation and installation.
+advantages of using Dvips, and may be skipped if you are just interested
+in learning how to use the program. *Note Installation::, for details
+of compilation and installation.
The Dvips driver generates excellent, standard PostScript, that can
be included in other documents as figures or printed through a variety
@@ -65,9 +63,9 @@ positioned in a variety of ways.
Printers with any resolution are supported, even if they have
different resolutions in the horizontal and vertical directions. High
-resolution output is supported for typesetters, including an option
-that compresses the bitmap fonts so that typesetter virtual memory is
-not exhausted. This option also significantly reduces the size of the
+resolution output is supported for typesetters, including an option that
+compresses the bitmap fonts so that typesetter virtual memory is not
+exhausted. This option also significantly reduces the size of the
PostScript file and decoding in the printer is very fast.
Missing fonts can be automatically generated if Metafont exists on
@@ -77,11 +75,11 @@ different size can be used instead, although Dvips will complain loudly
about the poor aesthetics of the resulting output.
Users will appreciate features such as collated copies and support
-for `tpic', `psfig', `emtex', and `METAPOST'; system administrators
-will love the support for multiple printers, each with their own
+for 'tpic', 'psfig', 'emtex', and 'METAPOST'; system administrators will
+love the support for multiple printers, each with their own
configuration file, and the ability to pipe the output directly to a
-program such as `lpr'. Support for MS-DOS, OS/2, and VMS in addition
-to Unix is provided in the standard distribution, and porting to other
+program such as 'lpr'. Support for MS-DOS, OS/2, and VMS in addition to
+Unix is provided in the standard distribution, and porting to other
systems is easy.
One of the most important features is the support of virtual fonts,
@@ -89,8 +87,8 @@ which add an entirely new level of flexibility to TeX. Virtual fonts
are used to give Dvips its excellent PostScript font support, handling
all the font remapping in a natural, portable, elegant, and extensible
way. Dvips even comes with its own Afm2tfm program that creates the
-necessary virtual fonts and TeX font metric files automatically from
-the Adobe font metric files.
+necessary virtual fonts and TeX font metric files automatically from the
+Adobe font metric files.
Source is provided and freely distributable, so adding a
site-specific feature is possible. Adding such features is made easier
@@ -110,14 +108,13 @@ File: dvips.info, Node: Installation, Next: Invoking Dvips, Prev: Why Dvips,
**************
Installing Dvips is mostly the same as installing any Kpathsea-using
-program. Therefore, for the basic steps involved, *note Installation:
-(kpathsea)Installation.
+program. Therefore, for the basic steps involved, *note
+(kpathsea)Installation::.
For solutions to common installation problems and information on how
-to report a bug, see the file `kpathsea/BUGS' (*note Bugs:
-(kpathsea)Bugs.). For solutions to Dvips-specific problems, *note
-Debug options::. Also see the Dvips home page at
-`http://www.radicaleye.com/dvips'.
+to report a bug, see the file 'kpathsea/BUGS' (*note (kpathsea)Bugs::).
+For solutions to Dvips-specific problems, *note Debug options::. Also
+see the Dvips home page at <http://www.radicaleye.com/dvips>.
Dvips does require some additional installation, detailed in the
sections below. Also, to configure color devices, *note Color device
@@ -133,24 +130,22 @@ configuration::.

File: dvips.info, Node: config.ps installation, Next: PostScript font installation, Up: Installation
-2.1 `config.ps' installation
+2.1 'config.ps' installation
============================
-Dvips has its own configuration files: a file `config.ps' for sitewide
-defaults, and a file `config.PRINTER' for each printer (output device).
-Since these are site-specific, `make install' does not create them; you
+Dvips has its own configuration files: a file 'config.ps' for sitewide
+defaults, and a file 'config.PRINTER' for each printer (output device).
+Since these are site-specific, 'make install' does not create them; you
must create them yourself.
(These Dvips configuration files are independent of the Kpathsea
-configuration file `texmf.cnf' (*note Config files: (kpathsea)Config
-files.).
+configuration file 'texmf.cnf' (*note (kpathsea)Config files::).
Dvips configuration files contents and searching are described fully
-in *note Config files::. The simplest way to create a new
-configuration file is to copy and modify the file
-`dvipsk/contrib/config.proto', seasoning with options to your taste
-from *note Config files::. Here is `config.proto' for your reading
-pleasure:
+in *note Config files::. The simplest way to create a new configuration
+file is to copy and modify the file 'dvipsk/contrib/config.proto',
+seasoning with options to your taste from *note Config files::. Here is
+'config.proto' for your reading pleasure:
% Prototype Dvips configuration file. (Public domain.)
% How to print, maybe with lp instead lpr, etc.
@@ -161,7 +156,7 @@ pleasure:
% Metafont mode. (This is completely different from the -M command-line
% option, which controls whether MakeTeXPK is invoked.) Get
- % `ftp://ftp.tug.org/tex/modes.mf' for a list of mode names. This mode
+ % <ftp://ftp.tug.org/tex/modes.mf> for a list of mode names. This mode
% and the D number above must agree, or MakeTeXPK will get confused.
M ljfour
@@ -198,8 +193,8 @@ pleasure:
%c FILENAME
% You will also want definitions for alternative paper sizes -- A4,
- % legal, and such. Examples in `contrib/papersize.level2' and
- % `contrib/papersize.simple'.
+ % legal, and such. Examples in contrib/papersize.level2 and
+ % contrib/papersize.simple.

File: dvips.info, Node: PostScript font installation, Next: Ghostscript installation, Prev: config.ps installation, Up: Installation
@@ -208,76 +203,17 @@ File: dvips.info, Node: PostScript font installation, Next: Ghostscript instal
================================
To use PostScript fonts with TeX and Dvips, you need both metric files
-(`.tfm' and `.vf') and the outlines (`.pfa' or `.pfb'). *Note Font
-concepts::.
-
- To support the basic PostScript font set, the recommended (and
-simplest) approach is to install the files at
-`http://www.ctan.org/tex-archive/fonts/psfonts/lw35nfsx.zip'. This
-archive contains metrics, outlines, and bitmaps (for previewing) for
-the 35 de facto standard fonts donated by URW and the additional
-high-quality freely available PostScript fonts donated by Adobe,
-Bitstream, and URW, including geometrically-created variants such as
-oblique and small caps.
-
- `CTAN:/fonts/psfonts' contains support for many additional fonts for
-which you must buy outlines (Adobe, Bigelow & Holmes, Monotype,
-Softkey, Y&Y). (For CTAN info, *note unixtex.ftp:
-(kpathsea)unixtex.ftp.; a copy is in the top-level file `INSTALL'.)
+('.tfm' and '.vf') and the outlines ('.pfa' or '.pfb'). *Note Font
+concepts::. Current TeX systems come with support for 35 base
+PostScript fonts and many more.
If you have additional PostScript fonts, you can make them available
-to Dvips by (1) giving them with appropriate filenames; and (2) running
+to Dvips by (1) giving them appropriate filenames; and (2) running
Afm2tfm (*note Making a font available::) to make TFM and VF metrics for
-TeX and Dvips to use. Also add them to `psfonts.map' if necessary
-(*note psfonts.map::); it contains everything contained in
-`lw35nfsx.zip' and most fonts that come with Unix systems.
-
- Following are locations for vendor-supplied fonts. Please mail
-<tex-k@tug.org> if you find fonts elsewhere on your system.
-
-DEC Ultrix
- /usr/lib/DPS/outline/decwin
-
-DEC Digital Unix
- /usr/lib/X11/fonts/Type1Adobe
-
-HP HP-UX 9, 10
- /usr/lib/X11/fonts/type1.st/typefaces
-
-IBM AIX
- /usr/lpp/DPS/fonts/outlines
- /usr/lpp/X11/lib/X11/fonts/Type1
- /usr/lpp/X11/lib/X11/fonts/Type1/DPS
-
-NeXT
- /NextLibrary/Fonts/outline
-
-SGI IRIX
- /usr/lib/DPS/outline/base /usr/lib/X11/fonts/Type1
-
-Sun SunOS 4.x
- (NeWSprint only)
- newsprint_2.5/SUNWsteNP/reloc/$BASEDIR/
- NeWSprint/small_openwin/lib/fonts
- /usr/openwin/lib/X11/fonts/Type1/outline
-
-Sun Solaris 2
- /usr/openwin/lib/X11/fonts/Type1/outline
-
-VMS
- SYS$COMMON:[SYSFONT.XDPS.OUTLINE]
-
-The NeXT system supplies more fonts than any others, but there's a lot
-of overlap.
-
- Finally, if you have an Hewlett-Packard printer, you should be able
-to get Type 1 font files for the standard 35 fonts from HP, if the
-freely available URW Type 1's do not satisfy for whatever reason. The
-phone number for HP Printer Drivers is (in the United States)
-303-339-7009. The driver set to ask for is Adobe Type Manager 2.51,
-and the disk set number is `MP210en3'. Mentioning anything other than
-Microsoft Windows when you ask for the driver set will likely lead to
-great confusion on the other end.
+TeX and Dvips to use. Also add them to 'psfonts.map' (*note
+psfonts.map::); this file must contain everything available in the
+system. The 'updmap' program is usually used to maintain 'psfonts.map';
+run 'updmap --help' for lots of information about how it works.

File: dvips.info, Node: Ghostscript installation, Next: Diagnosing problems, Prev: PostScript font installation, Up: Installation
@@ -289,17 +225,17 @@ Ghostscript is a PostScript interpreter freely available to end-users,
written by Peter Deutsch. It can read the PostScript produced by Dvips
and render it on your monitor, or for another device (e.g., an Epson
printer) that does not support PostScript, or in PDF format. The latest
-version is available via `http://www.cs.wisc.edu/~ghost/index.html' and
-`ftp://ftp.cs.wisc.edu/pub/ghost/aladdin/'.
+version is available via <http://www.cs.wisc.edu/~ghost/index.html> and
+<ftp://ftp.cs.wisc.edu/pub/ghost/aladdin/>.
A somewhat older version of Ghostscript is available under the GNU
General Public License, free to everyone. You can get that from
-`ftp://prep.ai.mit.edu/pub/gnu/'.
+<ftp://prep.ai.mit.edu/pub/gnu/>.
The program Ghostview, written by Tim Theisen, provides typical
previewing capabilities (next page/previous page, magnification, etc.).
It requires Ghostscript to run, and files in structured Postscript,
-specifically with `%%Page' comments (no `N' in `config.ps'). You can
+specifically with '%%Page' comments (no 'N' in 'config.ps'). You can
get Ghostview from the same places as Ghostscript.

@@ -314,12 +250,12 @@ work. The following sections provide some helpful hints if you find
yourself in such a situation.
For details on effective bug reporting, common installation problems,
-and `mktexpk' problems, *note Bugs: (kpathsea)Bugs.
+and 'mktexpk' problems, *note (kpathsea)Bugs::.
A good first debugging operation is to set the environment variable
-`DVIPSDEBUG', which will display any configuration and map files read
-by Dvips. This way you can be sure it's finding the files and settings
-you expect.
+'DVIPSDEBUG', which will display any configuration and map files read by
+Dvips. This way you can be sure it's finding the files and settings you
+expect.
* Menu:
@@ -336,55 +272,43 @@ File: dvips.info, Node: Debug options, Next: No output, Up: Diagnosing proble
2.4.1 Debug options
-------------------
-The `-d' flag to Dvips helps in tracking down certain errors. The
+The '-d' flag to Dvips helps in tracking down certain errors. The
parameter to this flag is an integer that tells what errors are
currently being tracked. To track a certain class of debug messages,
specify the appropriate number given below; if you wish to track
multiple classes, sum the numbers of the classes you wish to track. To
-track all classes, you can use `-1'.
+track all classes, you can use '-1'.
- You can also set the environment variable `KPATHSEA_DEBUG' instead
-of using `-d'. Some of these debugging options are actually provided
-by Kpathsea (*note Debugging: (kpathsea)Debugging.).
+ You can also set the environment variable 'KPATHSEA_DEBUG' instead of
+using '-d'. Some of these debugging options are actually provided by
+Kpathsea (*note (kpathsea)Debugging::).
The classes are:
1
specials
-
2
paths
-
4
fonts
-
8
pages
-
16
headers
-
32
font compression
-
64
files
-
128
(omitted)
-
256
config files
-
512
- Kpathsea `stat' calls
-
+ Kpathsea 'stat' calls
1024
Kpathsea hash table lookups
-
2048
Kpathsea path element expansion
-
4096
Kpathsea path searches
@@ -395,19 +319,19 @@ File: dvips.info, Node: No output, Next: Small or inverted, Prev: Debug optio
----------------------
If you are not getting any output at all, even from the simplest
-one-character file (for instance, `\ \bye'), then something is very
+one-character file (for instance, '\ \bye'), then something is very
wrong. Practically any file sent to a PostScript laser printer should
generate some output, at the very least a page detailing what error
occurred, if any. Talk to your system administrator about downloading a
PostScript error handler. (Adobe distributes a good one called
-`ehandler.ps'.)
+'ehandler.ps'.)
It is possible, especially if you are using non-Adobe PostScript,
that your PostScript interpreter is broken. Even then it should
generate an error message. Dvips tries to work around as many bugs as
possible in common non-Adobe PostScript interpreters, but doubtless it
-misses a few. PowerPage Revision 1, Interpreter Version 20001.001, on
-a Mitsubishi Shinko CHC-S446i color thermal dye sublimation printer is
+misses a few. PowerPage Revision 1, Interpreter Version 20001.001, on a
+Mitsubishi Shinko CHC-S446i color thermal dye sublimation printer is
known to be unable to print with any but builtin fonts.
If Dvips gives any strange error messages, or compilation on your
@@ -416,7 +340,7 @@ broken. Try using the debug options to determine where the error
occurred (*note Debug options::).
It is possible your spooler is broken and is misinterpreting the
-structured comments. Try the `-N' flag to turn off structured comments
+structured comments. Try the '-N' flag to turn off structured comments
and see what happens.

@@ -428,9 +352,9 @@ File: dvips.info, Node: Small or inverted, Next: Printer errors, Prev: No out
If some documents come out inverted or too small, probably your spooler
is not supplying an end of job indicator at the end of each file. (This
commonly happens on small machines that don't have spoolers.) You can
-force Dvips to do this with the `-F' flag (or `F' config file option),
+force Dvips to do this with the '-F' flag (or 'F' config file option),
but this generates files with a terminating binary character
-(control-D). You can also try using the `-s' flag (or `s' config file
+(control-D). You can also try using the '-s' flag (or 's' config file
option) to enclose the entire job in a save/restore pair. *Note
Command-line options::, and *note Config files::.
@@ -442,18 +366,18 @@ File: dvips.info, Node: Printer errors, Next: Long documents fail, Prev: Smal
If your printer returns error messages, the error message gives very
good information on what might be going wrong. One of the most common
-error messages is `bop undefined'. This is caused by old versions of
+error messages is 'bop undefined'. This is caused by old versions of
Transcript and other spoolers that do not properly parse the setup
section of the PostScript. To fix this, turn off structured comments
-with the `-N' option, but it'd be best to get your spooling software
+with the '-N' option, but it'd be best to get your spooling software
updated.
- Another error message is `VM exhausted'. Some printers indicate
-this error by locking up, others quietly reset. This is caused by Dvips
+ Another error message is 'VM exhausted'. Some printers indicate this
+error by locking up, others quietly reset. This is caused by Dvips
thinking that the printer has more memory than it actually does, and
-then printing a complicated document. To fix this, try lowering the
-`m' parameter in the configuration file; use the debug option to make
-sure you adjust the correct file.
+then printing a complicated document. To fix this, try lowering the 'm'
+parameter in the configuration file; use the debug option to make sure
+you adjust the correct file.
Other errors may indicate you are trying to include graphics that
don't nest properly in other PostScript documents, among other things.
@@ -477,7 +401,7 @@ File: dvips.info, Node: Including graphics fails, Prev: Long documents fail,
------------------------------
The most common problem with including graphics is an incorrect bounding
-box (*note Bounding box::). Complain to whoever wrote the software that
+box (*note Bounding box::). Complain to whoever wrote the software that
generated the file if the bounding box is indeed incorrect.
Another possible problem is that the figure you are trying to include
@@ -486,7 +410,7 @@ must follow when generating files to be included. The Dvips program
includes work-arounds for such errors in Adobe Illustrator and other
programs, but there are certainly applications that haven't been tested.
- One possible thing to try is the `-K' flag which strips the comments
+ One possible thing to try is the '-K' flag which strips the comments
from an included figure. This might be necessary if the PostScript
spooling software does not read the structured comments correctly. Use
of this flag will break graphics from some applications, though, since
@@ -513,9 +437,9 @@ environment variables, and command-line options.
* Menu:
* Basic usage::
-* Command-line options::
-* Environment variables::
-* Config files::
+* Command-line options::
+* Environment variables::
+* Config files::

File: dvips.info, Node: Basic usage, Next: Command-line options, Up: Invoking Dvips
@@ -527,8 +451,8 @@ To use Dvips at its simplest, simply type
dvips foo
-where `foo.dvi' is the output of TeX that you want to print. The
-default output is to a corresponding file `foo.ps'; Dvips may also have
+where 'foo.dvi' is the output of TeX that you want to print. The
+default output is to a corresponding file 'foo.ps'; Dvips may also have
been locally configured to output directly to a printer by default.
If you use fonts that have not been used on your system before, they
@@ -537,7 +461,7 @@ progress reports appear by default. The next time that document is
printed, these fonts will have been saved in the proper directories, so
printing will go much faster. (If Dvips tries to endlessly generate the
same fonts over and over again, it hasn't been installed properly.
-*Note Unable to generate fonts: (kpathsea)Unable to generate fonts.)
+*Note (kpathsea)Unable to generate fonts::.)
Many options are available (see the next section). For a brief
summary of available options, just type
@@ -555,7 +479,7 @@ section will give a good idea of the capabilities of the driver.
* Menu:
-* Option summary:: Quick listing, from Dvips --help.
+* Option summary:: Quick listing, from Dvips -help.
* Option details:: More information about each option.

@@ -565,7 +489,7 @@ File: dvips.info, Node: Option summary, Next: Option details, Up: Command-lin
--------------------
Here is a handy summary of the options; it is printed out when you run
-Dvips with no arguments or with the standard `--help' option.
+Dvips with no arguments or with the standard '--help' option.
Usage: dvips [OPTION]... FILENAME[.dvi]
Convert DVI input files to PostScript.
@@ -614,215 +538,220 @@ File: dvips.info, Node: Option details, Prev: Option summary, Up: Command-lin
--------------------
Many of the parameterless options listed here can be turned off by
-suffixing the option with a zero (`0'); for instance, to turn off page
-reversal, use `-r0'. Such options are marked with a trailing `*'.
+suffixing the option with a zero ('0'); for instance, to turn off page
+reversal, use '-r0'. Such options are marked with a trailing '*'.
-`-'
+'-'
Read additional options from standard input after processing the
command line.
-`--help'
+'--help'
Print a usage message and exit.
-`--version'
+'--version'
Print the version number and exit.
-`-a*'
- Conserve memory by making three passes over the DVI file instead
- of two and only loading those characters actually used. Generally
+'-a*'
+ Conserve memory by making three passes over the DVI file instead of
+ two and only loading those characters actually used. Generally
only useful on machines with a very limited amount of memory, like
some PCs.
-`-A'
+'-A'
Print only the odd pages. This option uses TeX page numbers, not
physical page numbers.
-`-b NUM'
+'-b NUM'
Generate NUM copies of each page, but duplicating the page body
- rather than using the `/#copies' PostScript variable. This can be
- useful in conjunction with a header file setting `bop-hook' to do
+ rather than using the '/#copies' PostScript variable. This can be
+ useful in conjunction with a header file setting 'bop-hook' to do
color separations or other neat tricks.
-`-B'
+'-B'
Print only the even pages. This option uses TeX page numbers, not
physical page numbers.
-`-c NUM'
+'-c NUM'
Generate NUM consecutive copies of every page, i.e., the output is
uncollated. This merely sets the builtin PostScript variable
- `/#copies'.
+ '/#copies'.
-`-C NUM'
+'-C NUM'
Generate NUM copies, but collated (by replicating the data in the
- PostScript file). Slower than the `-c' option, but easier on the
+ PostScript file). Slower than the '-c' option, but easier on the
hands, and faster than resubmitting the same PostScript file
multiple times.
-`-d NUM'
- Set the debug flags, showing what Dvips (thinks it) is doing.
- This will work unless Dvips has been compiled without the `DEBUG'
- option (not recommended). *Note Debug options::, for the possible
- values of NUM. Use `-d -1' as the first option for maximum output.
+'-d NUM'
+ Set the debug flags, showing what Dvips (thinks it) is doing. This
+ will work unless Dvips has been compiled without the 'DEBUG' option
+ (not recommended). *Note Debug options::, for the possible values
+ of NUM. Use '-d -1' as the first option for maximum output.
-`-D NUM'
+'-D NUM'
Set both the horizontal and vertical resolution to NUM, given in
- dpi (dots per inch). This affects the choice of bitmap fonts that
+ dpi (dots per inch). This affects the choice of bitmap fonts that
are loaded and also the positioning of letters in resident
- PostScript fonts. Must be between 10 and 10000. This affects both
+ PostScript fonts. Must be between 10 and 10000. This affects both
the horizontal and vertical resolution. If a high resolution
- (something greater than 400 dpi, say) is selected, the `-Z' flag
+ (something greater than 400 dpi, say) is selected, the '-Z' flag
should probably also be used. If you are using fonts made with
- Metafont, such as Computer Modern, `mktexpk' needs to know about
+ Metafont, such as Computer Modern, 'mktexpk' needs to know about
the value for NUM that you use or Metafont will fail. See the file
- `ftp://ftp.tug.org/tex/modes.mf' for a list of resolutions and mode
+ <ftp://ftp.tug.org/tex/modes.mf> for a list of resolutions and mode
names for most devices.
-`-e NUM'
- Maximum drift in pixels of each character from its `true'
- resolution-independent position on the page. The default value of
- this parameter is resolution dependent (it is the number of
- entries in the list [100, 200, 300, 400, 500, 600, 800, 1000,
- 1200, 1600, 2000, 2400, 2800, 3200, ...] that are less than or
- equal to the resolution in dots per inch). Allowing individual
- characters to `drift' from their correctly rounded positions by a
- few pixels, while regaining the true position at the beginning of
- each new word, improves the spacing of letters in words.
-
-`-E*'
+'-e NUM'
+ Maximum drift in pixels of each character from its 'true'
+ resolution-independent position on the page. The default value of
+ this parameter is resolution dependent (it is the number of entries
+ in the list [100, 200, 300, 400, 500, 600, 800, 1000, 1200, 1600,
+ 2000, 2400, 2800, 3200, ...] that are less than or equal to the
+ resolution in dots per inch). Allowing individual characters to
+ 'drift' from their correctly rounded positions by a few pixels,
+ while regaining the true position at the beginning of each new
+ word, improves the spacing of letters in words.
+
+'-E*'
Generate an EPSF file with a tight bounding box. This only looks
at marks made by characters and rules, not by any included
graphics. In addition, it gets the glyph metrics from the TFM
file, so characters that print outside their enclosing TFM box may
- confuse it. In addition, the bounding box might be a bit too
- loose if the character glyph has significant left or right side
- bearings. Nonetheless, this option works well enough for creating
- small EPSF files for equations or tables or the like. (Of course,
- Dvips output, especially when using bitmap fonts, is
- resolution-dependent and thus does not make very good EPSF files,
- especially if the images are to be scaled; use these EPSF files
- with care.) For multiple page input files, also specify `-i' to
- get each page as a separate EPSF file; otherwise, all the pages
- are overlaid in the single output file.
-
-`-f*'
+ confuse it. In addition, the bounding box might be a bit too loose
+ if the character glyph has significant left or right side bearings.
+ Nonetheless, this option works well enough for creating small EPSF
+ files for equations or tables or the like. (Of course, Dvips
+ output, especially when using bitmap fonts, is resolution-dependent
+ and thus does not make very good EPSF files, especially if the
+ images are to be scaled; use these EPSF files with care.) For
+ multiple page input files, also specify '-i' to get each page as a
+ separate EPSF file; otherwise, all the pages are overlaid in the
+ single output file.
+
+'-f*'
Run as a filter. Read the DVI file from standard input and write
the PostScript to standard output. The standard input must be
seekable, so it cannot be a pipe. If your input must be a pipe,
write a shell script that copies the pipe output to a temporary
- file and then points Dvips at this file. This option also
- disables the automatic reading of the `PRINTER' environment
- variable; use `-P$PRINTER' after the `-f' to read it anyway. It
- also turns off the automatic sending of control-D if it was turned
- on with the `-F' option or in the configuration file; use `-F'
- after the `-f' to send it anyway.
-
-`-F*'
+ file and then points Dvips at this file. This option also disables
+ the automatic reading of the 'PRINTER' environment variable; use
+ '-P$PRINTER' after the '-f' to read it anyway. It also turns off
+ the automatic sending of control-D if it was turned on with the
+ '-F' option or in the configuration file; use '-F' after the '-f'
+ to send it anyway.
+
+'-F*'
Write control-D (ASCII code 4) as the very last character of the
PostScript file. This is useful when Dvips is driving the printer
directly instead of working through a spooler, as is common on
personal systems. On systems shared by more than one person, this
is not recommended.
-`-G*'
+'-G*'
Shift non-printing characters (ASCII 0-32, 127) to higher-numbered
positions. This was useful to work around bugs in old versions of
Adobe's PDF reader. It's more likely to cause problems nowadays.
-`-h NAME'
- Prepend NAME as an additional header file, or, if NAME is `-',
+'-h NAME'
+ Prepend NAME as an additional header file, or, if NAME is '-',
suppress all header files. Any definitions in the header file get
- added to the PostScript `userdict'.
+ added to the PostScript 'userdict'.
-`-i*'
+'-i*'
Make each section be a separate file; a "section" is a part of the
document processed independently, most often created to avoid
- memory overflow. The filenames are created replacing the suffix
- of the supplied output file name by a three-digit sequence number.
- This option is most often used in conjunction with the `-S' option
- which sets the maximum section length in pages; if `-i' is
- specified and `-S' is not, each page is output as a separate file.
+ memory overflow. The filenames are created replacing the suffix of
+ the supplied output file name by a three-digit sequence number.
+ This option is most often used in conjunction with the '-S' option
+ which sets the maximum section length in pages; if '-i' is
+ specified and '-S' is not, each page is output as a separate file.
For instance, some phototypesetters cannot print more than ten or
- so consecutive pages before running out of steam; these options
- can be used to automatically split a book into ten-page sections,
- each to its own file.
-
-`-j*'
- Download only needed characters from Type 1 fonts. This is the
+ so consecutive pages before running out of steam; these options can
+ be used to automatically split a book into ten-page sections, each
+ to its own file.
+
+ On the other hand, if your document uses very large fonts or very
+ large included figures, Dvips might take it upon itself to split
+ the output into unwanted sections, to try to avoid overflowing
+ printer memory. *Note Headers and memory usage::, for ways to
+ handle this.
+
+'-j*'
+ Download only needed characters from Type 1 fonts. This is the
default in the current release. Some debugging flags trace this
operation (*note Debug options::). You can also control partial
downloading on a per-font basis (*note psfonts.map::).
-`-k*'
+'-k*'
Print crop marks. This option increases the paper size (which
should be specified, either with a paper size special or with the
- `-T' option) by a half inch in each dimension. It translates each
+ '-T' option) by a half inch in each dimension. It translates each
page by a quarter inch and draws cross-style crop marks. It is
mostly useful with typesetters that can set the page size
- automatically. This works by downloading `crop.pro'.
+ automatically. This works by downloading 'crop.pro'.
-`-K*'
+'-K*'
Remove comments in included PostScript graphics, font files, and
headers; only necessary to get around bugs in spoolers or
- PostScript post-processing programs. Specifically, the `%%Page'
- comments, when left in, often cause difficulties. Use of this
- flag can cause other graphics to fail, however, since the
- PostScript header macros from some software packages read portion
- the input stream line by line, searching for a particular comment.
-
-`-l [=]NUM'
- The last page printed will be the first one numbered NUM. Default
+ PostScript post-processing programs. Specifically, the '%%Page'
+ comments, when left in, often cause difficulties. Use of this flag
+ can cause other graphics to fail, however, since the PostScript
+ header macros from some software packages read portion the input
+ stream line by line, searching for a particular comment.
+
+'-l [=]NUM'
+ The last page printed will be the first one numbered NUM. Default
is the last page in the document. If NUM is prefixed by an equals
- sign, then it (and the argument to the `-p' option, if specified)
+ sign, then it (and the argument to the '-p' option, if specified)
is treated as a physical (absolute) page number, rather than a
- value to compare with the TeX `\count0' values stored in the DVI
- file. Thus, using `-l =9' will end with the ninth page of the
+ value to compare with the TeX '\count0' values stored in the DVI
+ file. Thus, using '-l =9' will end with the ninth page of the
document, no matter what the pages are actually numbered.
-`-m*'
+'-m*'
Specify manual feed, if supported by the output device.
-`-mode MODE'
+'-mode MODE'
Use MODE as the Metafont device name for path searching and font
generation. This overrides any value from configuration files.
With the default paths, explicitly specifying the mode also makes
the program assume the fonts are in a subdirectory named MODE.
*Note TeX directory structure: (kpathsea)TeX directory structure.
- If Metafont does not understand the MODE name, see *note Unable to
- generate fonts: (kpathsea)Unable to generate fonts.
-
-`-M*'
- Turns off automatic font generation (`mktexpk'). If `mktexpk',
- the invocation is appended to a file `missfont.log' (by default)
- in the current directory. You can then execute the log file to
- create the missing files after fixing the problem. If the current
- directory is not writable and the environment variable or
- configuration file value `TEXMFOUTPUT' is set, its value is used.
- Otherwise, nothing is written. The name `missfont.log' is
- overridden by the `MISSFONT_LOG' environment variable or
- configuration file value.
-
-`-n NUM'
- Print at most NUM pages. Default is 100000.
-
-`-N*'
- Turns off generation of structured comments such as `%%Page'; this
+ If Metafont does not understand the MODE name, see *note
+ (kpathsea)Unable to generate fonts::.
+
+'-M*'
+ Turns off automatic font generation ('mktexpk'). If 'mktexpk', the
+ invocation is appended to a file 'missfont.log' (by default) in the
+ current directory. You can then execute the log file to create the
+ missing files after fixing the problem. If the current directory
+ is not writable and the environment variable or configuration file
+ value 'TEXMFOUTPUT' is set, its value is used. Otherwise, nothing
+ is written. The name 'missfont.log' is overridden by the
+ 'MISSFONT_LOG' environment variable or configuration file value.
+
+'-n NUM'
+ Print at most NUM pages. Default is 100000.
+
+'-N*'
+ Turns off generation of structured comments such as '%%Page'; this
may be necessary on some systems that try to interpret PostScript
comments in weird ways, or on some PostScript printers. Old
versions of TranScript in particular cannot handle modern
- Encapsulated PostScript. Beware: This also disables page
- movement, etc., in PostScript viewers such as Ghostview.
+ Encapsulated PostScript. Beware: This also disables page movement,
+ etc., in PostScript viewers such as Ghostview.
-`-noomega'
+'-noomega'
Disable the use of Omega extensions when interpreting DVI files.
- By default, the additional opcodes `129' and `134' are recognized
- by Dvips as Omega or pTeX extensions and interpreted as requests
- to set 2-byte characters.
+ By default, the additional opcodes '129' and '134' are recognized
+ by Dvips as Omega or pTeX extensions and interpreted as requests to
+ set 2-byte characters.
-`-noptex'
+'-noptex'
Disable the use of pTeX extensions when interpreting DVI files. By
- default, the additional opcodes `130' and `135' are recognized by
- Dvips as Omega extensions and interpreted as requests to set
- 3-byte characters, and `255' as request to change the typesetting
+ default, the additional opcodes '130' and '135' are recognized by
+ Dvips as Omega extensions and interpreted as requests to set 3-byte
+ characters, and '255' as request to change the typesetting
direction.
The only drawback is that the virtual font array will (at least
@@ -830,196 +759,191 @@ reversal, use `-r0'. Such options are marked with a trailing `*'.
256 positions, i.e., the memory requirements of Dvips will be
somewhat larger. If you find this unacceptable or encounter
another problem with the Omega or pTeX extensions, you can switch
- off the pTeX extension by using `-noptex', or both by using
- `-noomega' (but please do send a bug report if you find such
- problems, *note Bugs: (kpathsea)Bugs.).
+ off the pTeX extension by using '-noptex', or both by using
+ '-noomega' (but please do send a bug report if you find such
+ problems, *note (kpathsea)Bugs::).
-`-o NAME'
- Send output to the file NAME. If `-o' is specified without NAME
+'-o NAME'
+ Send output to the file NAME. If '-o' is specified without NAME
(i.e., it is the last thing on the command line), the default is
- `FILE.ps' where the input DVI file was `FILE.dvi'. If `-o' isn't
+ 'FILE.ps' where the input DVI file was 'FILE.dvi'. If '-o' isn't
given at all, the configuration file default is used.
- If NAME is `-', output goes to standard output. If the first
- character of NAME is `!' or `|', then the remainder will be used
- as an argument to `popen'; thus, specifying `|lpr' as the output
- file will automatically queue the file for printing as usual.
- (The MS-DOS version will print to the local printer device `PRN'
- when NAME is `|lpr' and a program by that name cannot be found.)
+ If NAME is '-', output goes to standard output. If the first
+ character of NAME is '!' or '|', then the remainder will be used as
+ an argument to 'popen'; thus, specifying '|lpr' as the output file
+ will automatically queue the file for printing as usual. (The
+ MS-DOS version will print to the local printer device 'PRN' when
+ NAME is '|lpr' and a program by that name cannot be found.)
- `-o' disables the automatic reading of the `PRINTER' environment
- variable, and turns off the automatic sending of control-D. See
- the `-f' option for how to override this.
+ '-o' disables the automatic reading of the 'PRINTER' environment
+ variable, and turns off the automatic sending of control-D. See the
+ '-f' option for how to override this.
-`-O X-OFFSET,Y-OFFSET'
+'-O X-OFFSET,Y-OFFSET'
Move the origin by X-OFFSET,Y-OFFSET, a comma-separated pair of
- dimensions such as `.1in,-.3cm' (*note papersize special::). The
+ dimensions such as '.1in,-.3cm' (*note papersize special::). The
origin of the page is shifted from the default position (of one
inch down, one inch to the right from the upper left corner of the
paper) by this amount. This is usually best specified in the
printer-specific configuration file.
- This is useful for a printer that consistently offsets output
- pages by a certain amount. You can use the file `testpage.tex' to
+ This is useful for a printer that consistently offsets output pages
+ by a certain amount. You can use the file 'testpage.tex' to
determine the correct value for your printer. Be sure to do
- several runs with the same `O' value--some printers vary widely
+ several runs with the same 'O' value--some printers vary widely
from run to run.
If your printer offsets every other page consistently, instead of
- every page, your best recourse is to use `bop-hook' (*note
+ every page, your best recourse is to use 'bop-hook' (*note
PostScript hooks::).
-`-p [=]NUM'
- The first page printed will be the first one numbered NUM. Default
- is the first page in the document. If NUM is prefixed by an
- equals sign, then it (and the argument to the `-l' option, if
- specified) is treated as a physical (absolute) page number, rather
- than a value to compare with the TeX `\count0' values stored in the
- DVI file. Thus, using `-p =3' will start with the third page of
- the document, no matter what the pages are actually numbered.
-
-`-pp FIRST-LAST'
- Print pages FIRST through LAST; equivalent to `-p FIRST -l LAST',
- except that multiple `-pp' options accumulate, unlike `-p' and
- `-l'. The `-' separator can also be `:'.
-
-`-P PRINTER'
- Read the configuration file `config.PRINTER' (`PRINTER.cfg' on
- MS-DOS), which can set the output name (most likely `o |lpr
- -PPRINTER'), resolution, Metafont mode, and perhaps font paths and
- other printer-specific defaults. It works best to put sitewide
- defaults in the one master `config.ps' file and only things that
- vary printer to printer in the `config.PRINTER' files; `config.ps'
- is read before `config.PRINTER'.
-
- A configuration file for creating Adobe PDF files is provided in
- `config.pdf' and can be loaded with `-Ppdf', it will try to
- include Type1 outline fonts into the PostScript file (*note
- Hypertext caveats::).
-
- If no `-P' or `-o' is given, the environment variable `PRINTER' is
+'-p [=]NUM'
+ The first page printed will be the first one numbered NUM. Default
+ is the first page in the document. If NUM is prefixed by an equals
+ sign, then it (and the argument to the '-l' option, if specified)
+ is treated as a physical (absolute) page number, rather than a
+ value to compare with the TeX '\count0' values stored in the DVI
+ file. Thus, using '-p =3' will start with the third page of the
+ document, no matter what the pages are actually numbered.
+
+'-pp FIRST-LAST'
+ Print pages FIRST through LAST; equivalent to '-p FIRST -l LAST',
+ except that multiple '-pp' options accumulate, unlike '-p' and
+ '-l'. The '-' separator can also be ':'.
+
+'-P PRINTER'
+ Read the configuration file 'config.PRINTER' ('PRINTER.cfg' on
+ MS-DOS), which typically sets the output name (most likely 'o |lpr
+ -PPRINTER'), resolution, Metafont mode, and perhaps other
+ printer-specific defaults. It works best to put sitewide defaults
+ in the one master 'config.ps' file and only things that vary from
+ printer to printer in the 'config.PRINTER' files; 'config.ps' is
+ read before 'config.PRINTER'.
+
+ A configuration file for eventual creation of Adobe PDF files is
+ provided in 'config.pdf' and thus can be loaded with '-Ppdf'. It
+ will try to include Type 1 outline fonts into the PostScript file
+ (*note Hypertext caveats::).
+
+ If no '-P' or '-o' is given, the environment variable 'PRINTER' is
checked. If that variable exists, and a corresponding
- `config.PRINTER' (`PRINTER.cfg' on MS-DOS) file exists, it is read.
+ 'config.PRINTER' ('PRINTER.cfg' on MS-DOS) file exists, it is read.
*Note Configuration file searching::.
-`-q*'
+'-q*'
Run quietly. Don't chatter about pages converted, etc. to standard
output; report no warnings (only errors) to standard error.
-`-r*'
+'-r*'
Output pages in reverse order. By default, page 1 is output first.
-`-R'
- Run securely. `-R2' disables both shell command execution in
- `\special' (via ``', *note Dynamic creation of graphics::) and
- config files (via the `E' option, *note Configuration file
- commands::) and opening of any absolute or `..'-relative
- filenames. `-R1', the default, forbids shell escapes but allows
- absolute filenames. `-R0' allows both.
+'-R'
+ Run securely. '-R2' disables both shell command execution in
+ '\special' (via '`', *note Dynamic creation of graphics::) and
+ config files (via the 'E' option, *note Configuration file
+ commands::) and opening of any absolute or '..'-relative filenames.
+ '-R1', the default, forbids shell escapes but allows absolute
+ filenames. '-R0' allows both.
-`-s*'
+'-s*'
Enclose the output in a global save/restore pair. This causes the
file to not be truly conformant, and is thus not recommended, but
is useful if you are driving a deficient printer directly and thus
don't care too much about the portability of the output to other
environments.
-`-S NUM'
- Set the maximum number of pages in each `section'. This option is
- most commonly used with the `-i' option; see its description above
+'-S NUM'
+ Set the maximum number of pages in each 'section'. This option is
+ most commonly used with the '-i' option; see its description above
for more information.
-`-t PAPERTYPE'
+'-t PAPERTYPE'
Set the paper type to PAPERTYPE, usually defined in one of the
configuration files, along with the appropriate PostScript code to
select it (*note Config file paper sizes::).
- - You can also specify a PAPERTYPE of `landscape', which
- rotates a document by 90 degrees.
-
+ - You can also specify a PAPERTYPE of 'landscape', which rotates
+ a document by 90 degrees.
- To rotate a document whose paper type is not the default, you
- can use the `-t' option twice, once for the paper type, and
- once for `landscape'.
-
- - In general, you should not use any `-t' option when using a
- `papersize' special, which some LaTeX packages (e.g.,
- `hyperref') insert.
-
+ can use the '-t' option twice, once for the paper type, and
+ once for 'landscape'.
+ - In general, you should not use any '-t' option when using a
+ 'papersize' special, which some LaTeX packages (e.g.,
+ 'hyperref') insert.
- One exception is when using a nonstandard paper size that is
- not already defined in `config.ps'; in this case, you need to
- specify `-t unknown'.
-
+ not already defined in 'config.ps'; in this case, you need to
+ specify '-t unknown'.
- Another exception is when producing multi-page files for
- further processing; use `-t nopaper' to omit any paper size
+ further processing; use '-t nopaper' to omit any paper size
information in the output. (If you just have a single page
- document, you can use `-E' to get pure EPSF output.)
+ document, you can use '-E' to get pure EPSF output.)
-`-T HSIZE,VSIZE'
+'-T HSIZE,VSIZE'
Set the paper size to (HSIZE,VSIZE), a comma-separated pair of
- dimensions such as `.1in,-.3cm' (*note papersize special::). It
+ dimensions such as '.1in,-.3cm' (*note papersize special::). It
overrides any paper size special in the DVI file. Be careful, as
the paper size will stick to a predefined size if there is one
- close enough. To disable this behavior, use `-tunknown'.
+ close enough. To disable this behavior, use '-tunknown'.
-`-u PSMAPFILE'
+'-u PSMAPFILE'
Set PSMAPFILE to be the file that dvips uses for looking up
- PostScript font aliases. If PSMAPFILE begins with a `+'
- character, then the rest of the name is used as the name of the
- map file, and the map file is appended to the list of map files
- (instead of replacing the list). In either case, if the name has
- no extension, then `.map' is added at the end.
-
-`-U*'
- Disable a PostScript virtual memory-saving optimization that
- stores the character metric information in the same string that is
- used to store the bitmap information. This is only necessary when
- driving the Xerox 4045 PostScript interpreter, which has a bug
- that puts garbage on the bottom of each character. Not
- recommended unless you must drive this printer.
-
-`-v'
+ PostScript font aliases. If PSMAPFILE begins with a '+' character,
+ then the rest of the name is used as the name of the map file, and
+ the map file is appended to the list of map files (instead of
+ replacing the list). In either case, if the name has no extension,
+ then '.map' is added at the end.
+
+'-U*'
+ Disable a PostScript virtual memory-saving optimization that stores
+ the character metric information in the same string that is used to
+ store the bitmap information. This is only necessary when driving
+ the Xerox 4045 PostScript interpreter, which has a bug that puts
+ garbage on the bottom of each character. Not recommended unless
+ you must drive this printer.
+
+'-v'
Print the dvips version number and exit.
-`-V*'
+'-V*'
Download non-resident PostScript fonts as bitmaps. This requires
- use of `mtpk' or `gsftopk' or `pstopk' or some combination thereof
+ use of 'mtpk' or 'gsftopk' or 'pstopk' or some combination thereof
to generate the required bitmap fonts; these programs are supplied
- with Dvips. The bitmap must be put into `psfonts.map' as the
+ with Dvips. The bitmap must be put into 'psfonts.map' as the
downloadable file for that font. This is useful only for those
fonts for which you do not have real outlines, being downloaded to
printers that have no resident fonts, i.e., very rarely.
-`-x NUM'
- Set the magnification ratio to NUM/1000. Overrides the
+'-x NUM'
+ Set the magnification ratio to NUM/1000. Overrides the
magnification specified in the DVI file. Must be between 10 and
100000. It is recommended that you use standard magstep values
(1095, 1200, 1440, 1728, 2074, 2488, 2986, and so on) to help
reduce the total number of PK files generated. NUM may be a real
number, not an integer, for increased precision.
-`-X NUM'
+'-X NUM'
Set the horizontal resolution in dots per inch to NUM.
-`-y NUM'
+'-y NUM'
Set the magnification ratio to NUM/1000 times the magnification
- specified in the DVI file. See `-x' above.
+ specified in the DVI file. See '-x' above.
-`-Y NUM'
- Set the vertical resolution in dots per inch to NUM.
+'-Y NUM'
+ Set the vertical resolution in dots per inch to NUM.
-`-z*'
- Pass `html' hyperdvi specials through to the output for eventual
- distillation into PDF. This is not enabled by default to avoid
+'-z*'
+ Pass 'html' hyperdvi specials through to the output for eventual
+ distillation into PDF. This is not enabled by default to avoid
including the header files unnecessarily, and use of temporary
files in creating the output. *Note Hypertext::.
-`-Z*'
- Compress bitmap fonts in the output file, thereby reducing the
- size of what gets downloaded. Especially useful at high
- resolutions or when very large fonts are used. May slow down
- printing, especially on early 68000-based PostScript printers.
- Generally recommend today, and can be enabled in the configuration
- file (*note Configuration file commands::).
-
+'-Z*'
+ Compress bitmap fonts in the output file, thereby reducing the size
+ of what gets downloaded. Especially useful at high resolutions or
+ when very large fonts are used. May slow down printing, especially
+ on early 68000-based PostScript printers. Generally recommend
+ today, and can be enabled in the configuration file (*note
+ Configuration file commands::).

File: dvips.info, Node: Environment variables, Next: Config files, Prev: Command-line options, Up: Invoking Dvips
@@ -1030,65 +954,64 @@ File: dvips.info, Node: Environment variables, Next: Config files, Prev: Comm
Dvips looks for many environment variables, to define search paths and
other things. The path variables are read as needed, after all
configuration files are read, so they override values in the
-configuration files. (Except for `TEXCONFIG', which defines where the
+configuration files. (Except for 'TEXCONFIG', which defines where the
configuration files themselves are found.)
- *Note Path specifications: (kpathsea)Path specifications, for
-details of interpretation of path and other environment variables
-common to all Kpathsea-using programs. Only the environment variables
-specific to Dvips are mentioned here.
+ *Note (kpathsea)Path specifications::, for details of interpretation
+of path and other environment variables common to all Kpathsea-using
+programs. Only the environment variables specific to Dvips are
+mentioned here.
-`DVIPSDEBUG'
+'DVIPSDEBUG'
Write the absolute path names of any configuration or map files to
standard output, for debugging. This isn't done by default because
these files are read even before the banner is printed. For
voluminous additional debugging, set the environment variable
- `KPATHSEA_DEBUG' to `-1' (*note Debugging: (kpathsea)Debugging.).
- (If `KPATHSEA_DEBUG' is set to any value, it automatically turns
- on `DVIPSDEBUG'.)
+ 'KPATHSEA_DEBUG' to '-1' (*note (kpathsea)Debugging::). (If
+ 'KPATHSEA_DEBUG' is set to any value, it automatically turns on
+ 'DVIPSDEBUG'.)
-`DVIPSFONTS'
+'DVIPSFONTS'
Default path to search for all fonts. Overrides all the font path
config file options and other environment variables (*note
- Supported file formats: (kpathsea)Supported file formats.).
+ (kpathsea)Supported file formats::).
-`DVIPSHEADERS'
+'DVIPSHEADERS'
Default path to search for PostScript header files. Overrides the
- `H' config file option (*note Configuration file commands::).
+ 'H' config file option (*note Configuration file commands::).
-`DVIPSMAKEPK'
- Overrides `mktexpk' as the name of the program to invoke to create
+'DVIPSMAKEPK'
+ Overrides 'mktexpk' as the name of the program to invoke to create
missing PK fonts. You can change the arguments passed to the
- `mktexpk' program with the `MAKETEXPK' environment variable; *note
- MakeTeX script arguments: (kpathsea)MakeTeX script arguments.
+ 'mktexpk' program with the 'MAKETEXPK' environment variable; *note
+ (kpathsea)MakeTeX script arguments::.
-`DVIPSRC'
+'DVIPSRC'
Specifies the name of the startup file (*note Configuration file
- searching::) which is read after `config.ps' but before any
+ searching::) which is read after 'config.ps' but before any
printer-specific configuration files.
-`DVIPSSIZES'
- Last-resort sizes for scaling of unfound fonts. Overrides the `R'
+'DVIPSSIZES'
+ Last-resort sizes for scaling of unfound fonts. Overrides the 'R'
definition in config files (*note Configuration file commands::).
-`PRINTER'
+'PRINTER'
Determine the default printer configuration file. (Dvips itself
- does not use `PRINTER' to determine the output destination in any
+ does not use 'PRINTER' to determine the output destination in any
way.)
-`TEXCONFIG'
- Path to search for Dvips' `config.PRINTER' configuration files,
- including the base `config.ps'. Using this single environment
+'TEXCONFIG'
+ Path to search for Dvips' 'config.PRINTER' configuration files,
+ including the base 'config.ps'. Using this single environment
variable, you can override everything else. (The printer-specific
- configuration files are called `PRINTER.cfg' on MS-DOS, but
- `config.ps' is called by that name on all platforms.)
+ configuration files are called 'PRINTER.cfg' on MS-DOS, but
+ 'config.ps' is called by that name on all platforms.)
-`TEXPICTS'
- Path to search for included graphics files. Overrides the `S'
+'TEXPICTS'
+ Path to search for included graphics files. Overrides the 'S'
config file option (*note Configuration file commands::). If not
- set, `TEXINPUTS' is looked for. *Note Supported file formats:
- (kpathsea)Supported file formats.
-
+ set, 'TEXINPUTS' is looked for. *Note (kpathsea)Supported file
+ formats::.

File: dvips.info, Node: Config files, Prev: Environment variables, Up: Invoking Dvips
@@ -1096,10 +1019,10 @@ File: dvips.info, Node: Config files, Prev: Environment variables, Up: Invoki
3.4 Dvips configuration files
=============================
-This section describes in detail the Dvips-specific `config.*' device
-configuration files (called `*.cfg' on MS-DOS), which override the
-`texmf.cnf' configuration files generic to Kpathsea which Dvips also
-reads (*note Config files: (kpathsea)Config files.).
+This section describes in detail the Dvips-specific 'config.*' device
+configuration files (called '*.cfg' on MS-DOS), which override the
+'texmf.cnf' configuration files generic to Kpathsea which Dvips also
+reads (*note (kpathsea)Config files::).
For information about installing these files, including a prototype
file you can copy, *note config.ps installation::.
@@ -1119,41 +1042,40 @@ The Dvips program loads many different configuration files, so that
parameters can be set globally across the system, on a per-device basis,
or individually by each user.
- 1. Dvips first reads (if it exists) `config.ps'; it is searched for
- along the path for Dvips configuration files, as described in
- *note Supported file formats: (kpathsea)Supported file formats.
+ 1. Dvips first reads (if it exists) 'config.ps'; it is searched for
+ along the path for Dvips configuration files, as described in *note
+ (kpathsea)Supported file formats::.
2. A user-specific startup file is loaded, so individual users can
override any options set in the global file. The environment
- variable `DVIPSRC', if defined, is used as the specification of
- the startup file. If this variable is undefined, Dvips uses a
+ variable 'DVIPSRC', if defined, is used as the specification of the
+ startup file. If this variable is undefined, Dvips uses a
platform-specific default name. On Unix Dvips looks for the
- default startup file under the name `$HOME/.dvipsrc', which is in
+ default startup file under the name '$HOME/.dvipsrc', which is in
the user's home directory. On MS-DOS and MS-Windows, where users
- generally don't have their private directories, the startup file
- is called `dvips.ini' and it is searched for along the path for
- Dvips configuration files (as described in *note Supported file
- formats: (kpathsea)Supported file formats.); users are expected to
- set this path as they see fit for their taste.
-
- 3. The command line is read and parsed: if the `-PDEVICE' option is
- encountered, at that point `config.DEVICE' is loaded. Thus, the
+ generally don't have their private directories, the startup file is
+ called 'dvips.ini' and it is searched for along the path for Dvips
+ configuration files (as described in *note (kpathsea)Supported file
+ formats::.); users are expected to set this path as they see fit
+ for their taste.
+
+ 3. The command line is read and parsed: if the '-PDEVICE' option is
+ encountered, at that point 'config.DEVICE' is loaded. Thus, the
printer configuration file can override anything in the site-wide
- or user configuration file, and it can also override options in
- the command line up to the point that the `-P' option was
- encountered. (On MS-DOS, the printer configuration files are
- called `DEVICE.cfg', since DOS doesn't allow more than 3 characters
- after the dot in filenames.)
-
- 4. If no `-P' option was specified, and also the `-o' and `-f'
- command line options were not used, Dvips checks the environment
- variable `PRINTER'. If it exists, then `config.$PRINTER'
- (`$PRINTER.cfg' on MS-DOS) is loaded (if it exists).
-
-
- Because the `.dvipsrc' file is read before the printer-specific
+ or user configuration file, and it can also override options in the
+ command line up to the point that the '-P' option was encountered.
+ (On MS-DOS, the printer configuration files are called
+ 'DEVICE.cfg', since DOS doesn't allow more than 3 characters after
+ the dot in filenames.)
+
+ 4. If no '-P' option was specified, and also the '-o' and '-f' command
+ line options were not used, Dvips checks the environment variable
+ 'PRINTER'. If it exists, then 'config.$PRINTER' ('$PRINTER.cfg' on
+ MS-DOS) is loaded (if it exists).
+
+ Because the '.dvipsrc' file is read before the printer-specific
configuration files, individual users cannot override settings in the
-latter. On the other hand, the `TEXCONFIG' path usually includes the
+latter. On the other hand, the 'TEXCONFIG' path usually includes the
current directory, and can in any case be set to anything, so the users
can always define their own printer-specific configuration files to be
found before the system's.
@@ -1161,23 +1083,22 @@ found before the system's.
A few command-line options are treated specially, in that they are
not overridden by configuration files:
-`-D'
+'-D'
As well as setting the resolution, this unsets the mode, if the
mode was previously set from a configuration file. If
- `config.$PRINTER' is read, however, any `D' or `M' lines from
- there will take effect.
+ 'config.$PRINTER' is read, however, any 'D' or 'M' lines from there
+ will take effect.
-`-mode'
- This overrides any mode setting (`M' line) in configuration files.
- `-mode' does not affect the resolution.
+'-mode'
+ This overrides any mode setting ('M' line) in configuration files.
+ '-mode' does not affect the resolution.
-`-o'
- This overrides any output setting (`o' line) in configuration
+'-o'
+ This overrides any output setting ('o' line) in configuration
files.
-
The purpose of these special cases is to (1) minimize the chance of
-having a mismatched mode and resolution (which `mktexpk' cannot
+having a mismatched mode and resolution (which 'mktexpk' cannot
resolve), and (2) let command-line options override config files where
possible.
@@ -1192,70 +1113,72 @@ command line options, but there are a few exceptions. When they are the
same, we omit the description here.
As with command line options, many may be turned off by suffixing the
-letter with a zero (`0').
+letter with a zero ('0').
Within a configuration file, empty lines, and lines starting with a
space, asterisk, equal sign, percent sign, or pound sign are ignored.
There is no provision for continuation lines.
-`@ NAME HSIZE VSIZE'
+'@ NAME HSIZE VSIZE'
Define paper sizes. *Note Config file paper sizes::.
-`a*'
- Memory conservation. Same as `-a', *note Option details::.
+'a*'
+ Memory conservation. Same as '-a', *note Option details::.
-`b #COPIES'
- Multiple copies. Same as `-b', *note Option details::.
+'b #COPIES'
+ Multiple copies. Same as '-b', *note Option details::.
-`c FILENAME'
+'c FILENAME'
Include FILENAME as an additional configuration file, read
immediately.
-`D DPI'
- Output resolution. Same as `-D', *note Option details::.
+'D DPI'
+ Output resolution. Same as '-D', *note Option details::.
-`e NUM'
- Max drift. Same as `-e', *note Option details::.
+'e NUM'
+ Max drift. Same as '-e', *note Option details::.
-`E COMMAND'
- Executes the command listed with `system'(3); can be used to get
+'E COMMAND'
+ Executes the command listed with 'system'(3); can be used to get
the current date into a header file for inclusion, for instance.
Possibly dangerous; this may be disabled, in which case a warning
will be printed if the option is used (and warnings are not
suppressed).
-`f*'
-`F'
- Run as a filter. Same as `-f', *note Option details::.
+'f*'
+'F'
+ Run as a filter. Same as '-f', *note Option details::.
-`G*'
- Shift low-numbered characters; obsolete. Same as `-G', *note
+'G*'
+ Shift low-numbered characters; obsolete. Same as '-G', *note
Option details::.
-`h HEADER'
- Prepend HEADER to output. Same as `h-', *note Option details::.
+'h HEADER'
+ Prepend HEADER to output. Same as 'h-', *note Option details::.
-`H PATH'
+'H PATH'
Use PATH to search for PostScript header files. The environment
- variable `DVIPSHEADERS' overrides this.
+ variable 'DVIPSHEADERS' overrides this.
-`i N'
- Make multiple output files. Same as `-i -S N', *note Option
+'i N'
+ Make multiple output files. Same as '-i -S N', *note Option
details::.
-`j*'
- Partially download Type 1 fonts. Same as `-j', *note Option
+'j*'
+ Partially download Type 1 fonts. Same as '-j', *note Option
details::.
-`K*'
- Remove comments from included PostScript files. Same as `-K',
+'K*'
+ Remove comments from included PostScript files. Same as '-K',
*note Option details::.
-`m NUM'
+'m NUM'
Declare NUM as the memory available for fonts and strings in the
- printer. Default is 180000. This value must be accurate if memory
- conservation and document splitting is to work correctly. To
- determine this value, send the following file to the printer:
+ printer. The compile-time default is 180000, but this is typically
+ overridden by 'config.ps' or other configuration files. This value
+ must be accurate if memory conservation and document splitting is
+ to work correctly. To determine this value, send the following
+ file to the printer:
%! Hey, we're PostScript
/Times-Roman findfont 30 scalefont setfont 144 432 moveto
@@ -1268,115 +1191,119 @@ There is no provision for continuation lines.
dynamically increase the memory available to a PostScript
interpreter, in which case this file might return a ridiculously
low number; for example, the NeXT computer and Ghostscript. In
- these cases, a value of one million works fine.
+ these cases, a value of, say, 10 million is likely fine.
+
+ To go all out: If NUM is zero or negative, Dvips sets the available
+ memory to a very large number (the maximum integer value in C), the
+ idea being that output is not to a printer and thus no splitting of
+ the output is desirable. The Dvips config file 'config.maxmem' is
+ provided to do this conveniently, namely with 'dvips -Pmaxmem'.
-`M MODE'
- Metafont mode. Same as `-mode', *note Option details::.
+'M MODE'
+ Metafont mode. Same as '-mode', *note Option details::.
-`N*'
+'N*'
Disable structured comments. Beware: This also turns off
displaying page numbers or changing to specific pagenumbers in
- PostScript viewers. Same as `-N', *note Option details::.
+ PostScript viewers. Same as '-N', *note Option details::.
-`o NAME'
- Send output to NAME. Same as `-o', *note Option details::. In
- the file `config.foo', a setting like this is probably appropriate:
+'o NAME'
+ Send output to NAME. Same as '-o', *note Option details::. In the
+ file 'config.foo', a setting like this is probably appropriate:
o |lpr -Pfoo
- The MS-DOS version will emulate spooling to `lpr' by printing to
- the local printer device `PRN' if it doesn't find an executable
- program by that name in the current directory or along the `PATH'.
+ The MS-DOS version will emulate spooling to 'lpr' by printing to
+ the local printer device 'PRN' if it doesn't find an executable
+ program by that name in the current directory or along the 'PATH'.
-`O XOFF,YOFF'
- Origin offset. Same as `-O', *note Option details::.
+'O XOFF,YOFF'
+ Origin offset. Same as '-O', *note Option details::.
-`p [+]NAME'
+'p [+]NAME'
Examine NAME for PostScript font aliases. Default is
- `psfonts.map'. This option allows you to specify different
+ 'psfonts.map'. This option allows you to specify different
resident fonts that different printers may have. If NAME starts
- with a `+' character, then the rest of the name (after any leading
+ with a '+' character, then the rest of the name (after any leading
spaces) is used as an additional map file; thus, it is possible to
have local map files pointed to by local configuration files that
append to the global map file. This can be used for font families.
-`P PATH'
+'P PATH'
Use PATH to search for bitmap PK font files is PATH. The
- `PKFONTS', `TEXPKS', `GLYPHFONTS', and `TEXFONTS' environment
- variables override this. *Note Supported file formats:
- (kpathsea)Supported file formats.
+ 'PKFONTS', 'TEXPKS', 'GLYPHFONTS', and 'TEXFONTS' environment
+ variables override this. *Note (kpathsea)Supported file formats::.
-`q*'
-`Q'
- Run quietly. Same as `-q', *note Option details::.
+'q*'
+'Q'
+ Run quietly. Same as '-q', *note Option details::.
-`r*'
- Page reversal. Same as `-r', *note Option details::.
+'r*'
+ Page reversal. Same as '-r', *note Option details::.
-`R NUM1 NUM2 ...'
+'R NUM1 NUM2 ...'
Define the list of default resolutions for PK fonts. If a font
size actually used in a document is not available and cannot be
created, Dvips will scale the font found at the closest of these
resolutions to the requested size, using PostScript scaling. The
resulting output may be ugly, and thus a warning is issued. To
- turn this last-resort scaling off, use a line with just the `R'
- and no numbers.
+ turn this last-resort scaling off, use a line with just the 'R' and
+ no numbers.
The given numbers must be sorted in increasing order; any number
smaller than the preceding one is ignored. This is because it is
better to scale a font up than down; scaling down can obliterate
small features in the character shape.
- The environment and config file values `DVIPSSIZES' or `TEXSIZES'
+ The environment and config file values 'DVIPSSIZES' or 'TEXSIZES'
override this configuration file setting.
- If no `R' settings or environment variables are specified, a list
- compiled in during installation is used. This default list is
- defined by the Makefile variable `default_texsizes', defined in
- the file `make/paths.make'.
+ If no 'R' settings or environment variables are specified, a list
+ compiled in during installation is used. This default list is
+ defined by the Makefile variable 'default_texsizes', defined in the
+ file 'make/paths.make'.
-`s*'
- Output global save/restore. Same as `-s', *note Option details::.
+'s*'
+ Output global save/restore. Same as '-s', *note Option details::.
-`S PATH'
+'S PATH'
Use PATH to search for special illustrations (Encapsulated
- PostScript files or psfiles). The `TEXPICTS' and then `TEXINPUTS'
+ PostScript files or psfiles). The 'TEXPICTS' and then 'TEXINPUTS'
environment variables override this.
-`T PATH'
- Use PATH to search for TFM files. The `TFMFONTS' and then
- `TEXFONTS' environment variables overrides this. This path is used
+'T PATH'
+ Use PATH to search for TFM files. The 'TFMFONTS' and then
+ 'TEXFONTS' environment variables overrides this. This path is used
for resident fonts and fonts that can't otherwise be found.
-`U*'
- Work around bug in Xerox 4045 printer. Same as `-U', *note Option
+'U*'
+ Work around bug in Xerox 4045 printer. Same as '-U', *note Option
details::.
-`V PATH'
+'V PATH'
Use PATH to search for virtual font files. This may be
device-dependent if you use virtual fonts to simulate actual fonts
on different devices.
-`W [STRING]'
- If STRING is supplied, write it to standard error after reading
- all the configuration files; with no STRING, cancel any previous
- `W' message. This is useful in the default configuration file to
+'W [STRING]'
+ If STRING is supplied, write it to standard error after reading all
+ the configuration files; with no STRING, cancel any previous 'W'
+ message. This is useful in the default configuration file to
remind users to specify a printer, for instance, or to notify users
about special characteristics of a particular printer.
-`X NUM'
- Horizontal resolution. Same as `-X' (*note Option details::).
+'X NUM'
+ Horizontal resolution. Same as '-X' (*note Option details::).
-`Y NUM'
- Vertical resolution. Same as `-Y' (*note Option details::).
+'Y NUM'
+ Vertical resolution. Same as '-Y' (*note Option details::).
-`Z*'
- Compress bitmap fonts. Same as `-Z' (*note Option details::).
+'Z*'
+ Compress bitmap fonts. Same as '-Z' (*note Option details::).
-`z*'
- Disables execution of system commands, like `-R' (*note Option
- details::). If `-R' is specified on the command line, that takes
+'z*'
+ Disables execution of system commands, like '-R' (*note Option
+ details::). If '-R' is specified on the command line, that takes
precedence.
-

File: dvips.info, Node: Paper size and landscape, Next: Interaction with PostScript, Prev: Invoking Dvips, Up: Top
@@ -1399,10 +1326,10 @@ A3 paper.
Since the intended paper size in these cases is a document design
decision, not a printing decision, such information should be given in
the TeX file and not on the Dvips command line. For this reason, Dvips
-supports a `papersize' special. It is hoped that this special will
+supports a 'papersize' special. It is hoped that this special will
become standard over time for TeX previewers and other printer drivers.
- Some LaTeX packages, e.g., `hyperref.sty', write a `papersize'
+ Some LaTeX packages, e.g., 'hyperref.sty', write a 'papersize'
special into the DVI file. In this case, you need not and should not
attempt to override it manually.
@@ -1415,10 +1342,10 @@ attempt to override it manually.

File: dvips.info, Node: papersize special, Next: Config file paper sizes, Up: Paper size and landscape
-4.1 `papersize' special
+4.1 'papersize' special
=======================
-The format of the `papersize' special is
+The format of the 'papersize' special is
\special{papersize=WIDTH,HEIGHT}
@@ -1428,26 +1355,26 @@ size. The dimensions supported are the same as for TeX; namely, in
points), bp (big points, the same as the default PostScript unit), pc
(picas), dd (didot points), and cc (ciceros).
- For a US letter size landscape document, the `papersize' would be:
+ For a US letter size landscape document, the 'papersize' would be:
\special{papersize=11in,8.5in}
-An alternate specification of `landscape':
+An alternate specification of 'landscape':
\special{landscape}
This is supported for backward compatibility, but it is hoped that
-reventually the `papersize' comment will dominate.
+reventually the 'papersize' comment will dominate.
- Of course, such a `\special' only informs Dvips of the desired paper
-size; you must also adjust `\hsize' and `\vsize' in your TeX document
+ Of course, such a '\special' only informs Dvips of the desired paper
+size; you must also adjust '\hsize' and '\vsize' in your TeX document
typeset to those dimensions.
- When using the `papersize' special, you generally should not also
-specify `-t' on the command line (*note Option details::). The
+ When using the 'papersize' special, you generally should not also
+specify '-t' on the command line (*note Option details::). The
exception is when using a nonstandard paper size that isn't predefined;
-in this case, use `-t unknown'.
+in this case, use '-t unknown'.
- The `papersize' special must occur somewhere on the first page of
-the document. Some packages, notably `hyperref', insert this special.
+ The 'papersize' special must occur somewhere on the first page of the
+document. Some packages, notably 'hyperref', insert this special.

File: dvips.info, Node: Config file paper sizes, Next: Paper trays, Prev: papersize special, Up: Paper size and landscape
@@ -1455,30 +1382,30 @@ File: dvips.info, Node: Config file paper sizes, Next: Paper trays, Prev: pap
4.2 Configuration file paper size command
=========================================
-The `@' command in a configuration file sets the paper size defaults
-and options. The first `@' command defines the default paper size. It
-has three possible parameters:
+The '@' command in a configuration file sets the paper size defaults and
+options. The first '@' command defines the default paper size. It has
+three possible parameters:
@ [NAME [HSIZE VSIZE]]
- If `@' is specified on a line by itself, with no parameters, it
+ If '@' is specified on a line by itself, with no parameters, it
instructs Dvips to discard all previous paper size information (possibly
from another configuration file).
If three parameters are given, with the first parameter being a name
-and the second and third being a dimension (as in `8.5in' or `3.2cc',
-just like in the `papersize' special), then the option is interpreted
-as starting a new paper size description, where NAME is the name and
-HSIZE and VSIZE define the horizontal and vertical size of the sheet of
-paper, respectively. For example:
+and the second and third being a dimension (as in '8.5in' or '3.2cc',
+just like in the 'papersize' special), then the option is interpreted as
+starting a new paper size description, where NAME is the name and HSIZE
+and VSIZE define the horizontal and vertical size of the sheet of paper,
+respectively. For example:
@ letterSize 8.5in 11in
- If both HSIZE and VSIZE are zero (you must still specify units!)
-then any page size will match. If the `@' character is immediately
-followed by a `+' sign, then the remainder of the line (after skipping
-any leading blanks) is treated as PostScript code to send to the
-printer, presumably to select that particular paper size:
+ If both HSIZE and VSIZE are zero (you must still specify units!) then
+any page size will match. If the '@' character is immediately followed
+by a '+' sign, then the remainder of the line (after skipping any
+leading blanks) is treated as PostScript code to send to the printer,
+presumably to select that particular paper size:
@ letter 8.5in 11in
@+ %%BeginPaperSize: Letter
@@ -1497,52 +1424,50 @@ For example:
@+ %%EndPaperSize
When Dvips has a paper format name given on the command line, it
-looks for a match by the NAME; when it has a `papersize' special, it
+looks for a match by the NAME; when it has a 'papersize' special, it
looks for a match by dimensions. The best match found (from the paper
size information in the configuration file) is used. The dimensions
must match within 5bp.
If nothing matches, a warning is printed and the first paper size
-with zero dimensions is used; this should be the `unknown' paper size
+with zero dimensions is used; this should be the 'unknown' paper size
definition mentioned below, resulting in the actual dimensions being
used.
Landscape mode for all paper sizes is automatically supported.
If your printer has a command to set a special paper size, then give
-dimensions of `0in 0in'; the PostScript code that sets the paper size
-can refer to the dimensions the user requested as `hsize' and `vsize';
-these will be macros defined in the PostScript that return the
-requested size in default PostScript units. Also, some printers want
-`BeginPaperSize' comments and paper size setting commands; others (such
-as the NeXT) want `PaperSize' comments and they will handle setting the
+dimensions of '0in 0in'; the PostScript code that sets the paper size
+can refer to the dimensions the user requested as 'hsize' and 'vsize';
+these will be macros defined in the PostScript that return the requested
+size in default PostScript units. Also, some printers want
+'BeginPaperSize' comments and paper size setting commands; others (such
+as the NeXT) want 'PaperSize' comments and they will handle setting the
paper size. So paper size entries should typically specify both.
- When using a paper size that is not already defined in `config.ps',
-you probably want to say `-t unknown' on the command line; the
-`unknown' paper size definition in `config.ps' has the requisite
-PostScript incantation to set the PostScript page size, as just
-described.
+ When using a paper size that is not already defined in 'config.ps',
+you probably want to say '-t unknown' on the command line; the 'unknown'
+paper size definition in 'config.ps' has the requisite PostScript
+incantation to set the PostScript page size, as just described.
If you want no paper size information in the output at all, use
-`-t nopaper'. This is useful with multi-page output that will be
-processed further. If you just have a single page document, you can
-use `-E' to get pure EPSF output.
+'-t nopaper'. This is useful with multi-page output that will be
+processed further. If you just have a single page document, you can use
+'-E' to get pure EPSF output.
- The Perl 5 script `contrib/configs/mkdvipspapers' in the
-distribution directory may help in determining appropriate paper size
-definitions.
+ The Perl 5 script 'contrib/configs/mkdvipspapers' in the distribution
+directory may help in determining appropriate paper size definitions.
- Notwithstanding the above, the default `letter' and `a4' paper size
-definitions in `config.ps' execute the `setpagedevice' operator if it
-exists (it was defined in PostScript Level 2), or the `letter' or `a4'
+ Notwithstanding the above, the default 'letter' and 'a4' paper size
+definitions in 'config.ps' execute the 'setpagedevice' operator if it
+exists (it was defined in PostScript Level 2), or the 'letter' or 'a4'
operator if they exist (they are nonstandard and thus perhaps cause
failures on certain (unknown) printers). Not executing any page size
definition at all confuses PostScript conversion programs such as
-`ps2pdf', so we want to execute one if we can.
+'ps2pdf', so we want to execute one if we can.
- The `letterSize' and `A4Size' paper size definitions are now
-synonyms for `letter' and `a4'.
+ The 'letterSize' and 'A4Size' paper size definitions are now synonyms
+for 'letter' and 'a4'.

File: dvips.info, Node: Paper trays, Prev: Config file paper sizes, Up: Paper size and landscape
@@ -1552,32 +1477,31 @@ File: dvips.info, Node: Paper trays, Prev: Config file paper sizes, Up: Paper
Some printers, such as the Hewlett-Packard HP4si, have multiple paper
trays. You can set up Dvips to take advantage of this using the
-`bop-hook' PostScript variable (*note PostScript hooks::).
+'bop-hook' PostScript variable (*note PostScript hooks::).
For example, suppose you have an alternate tray stocked with
letterhead paper; the usual tray has the usual paper. You have a
document where you want the first page printed on letterhead, and the
-remaining pages on the usual paper. You can create a header file, say
-`firstletterhead.PS', with the following (PostScript) code (`bop-hook'
+remaining pages on the usual paper. You can create a header file, say
+'firstletterhead.PS', with the following (PostScript) code ('bop-hook'
is passed the current physical page number, which starts at zero):
/bop-hook { dup 0 eq { ALTERNATETRAY } { NORMALTRAY } ifelse } def
where ALTERNATETRAY and NORMALTRAY are the appropriate commands to
-select the paper trays. On the 4SI, ALTERNATETRAY is `statusdict begin
-1 setpapertray end' and NORMALTRAY is `statusdict begin 0 setpapertray
+select the paper trays. On the 4SI, ALTERNATETRAY is 'statusdict begin
+1 setpapertray end' and NORMALTRAY is 'statusdict begin 0 setpapertray
end'.
Then, include the file with either
- * the `-h' command-line option (*note Option details::); or
+ * the '-h' command-line option (*note Option details::); or
- * the `h' config file option (*note Configuration file commands::);
+ * the 'h' config file option (*note Configuration file commands::);
or
- * `\special{header=FILE}' in your TeX document (*note Including
+ * '\special{header=FILE}' in your TeX document (*note Including
headers from TeX: Including headers from TeX.).
-

File: dvips.info, Node: Interaction with PostScript, Next: PostScript fonts, Prev: Paper size and landscape, Up: Top
@@ -1628,8 +1552,8 @@ page the graphic is located, and how big that graphic is.
This information is given as the lower left and upper right corners
of the box just enclosing the graphic, and is thus referred to as the
"bounding box". These coordinates are given in the default PostScript
-units (there are precisely 72 PostScript units to the inch, like TeX
-big points) with respect to the lower left corner of the sheet of paper.
+units (there are precisely 72 PostScript units to the inch, like TeX big
+points) with respect to the lower left corner of the sheet of paper.
To see if a PostScript file has a bounding box comment, just look at
the first few lines of the file. PostScript files are standard ASCII,
@@ -1651,31 +1575,31 @@ bounding box is given in this way when the program that generated the
PostScript couldn't know the size in advance, or was too lazy to compute
it.)
- If the document lacks a `%%BoundingBox:' altogether, you can
-determine one in a couple of ways. One is to use the `bbfig' program
-distributed with Dvips in the `contrib' directory. This can usually
+ If the document lacks a '%%BoundingBox:' altogether, you can
+determine one in a couple of ways. One is to use the 'bbfig' program
+distributed with Dvips in the 'contrib' directory. This can usually
find the correct bounding box automatically; it works best with
Ghostscript.
If the comment looks like this:
%%BoundingBox: 0 0 612 792
-the graphic claims to take up an entire sheet of paper. This is
-usually a symptom of a bug in the program that generated it.
+the graphic claims to take up an entire sheet of paper. This is usually
+a symptom of a bug in the program that generated it.
The other is to do it yourself: print the file. Now, take a ruler,
and make the following measurements (in PostScript units, so measure in
inches and multiply by 72): From the left edge of the paper to the
leftmost mark on the paper is LLX, the first number. From the bottom
-edge of the paper to the bottommost mark on the paper is LLY, the
-second number. From the left edge of the paper to the rightmost mark
-on the paper is URX, the third number. The fourth and final number,
-URY, is the distance from the bottom of the page to the uppermost mark
-on the paper.
+edge of the paper to the bottommost mark on the paper is LLY, the second
+number. From the left edge of the paper to the rightmost mark on the
+paper is URX, the third number. The fourth and final number, URY, is
+the distance from the bottom of the page to the uppermost mark on the
+paper.
Once you have the numbers, add a comment of the following form as the
second line of the document. (The first line should already be a line
-starting with the two characters `%!'; if it is not, the file probably
+starting with the two characters '%!'; if it is not, the file probably
isn't PostScript.)
%%BoundingBox: LLX LLY URX URY
@@ -1696,11 +1620,11 @@ File: dvips.info, Node: \includegraphics, Next: EPSF macros, Prev: Bounding b
------------------------------------------
Once the figure file has a bounding box comment (see the previous
-section) you are ready to import the graphic into a LaTeX document. For
+section) you are ready to import the graphic into a LaTeX document. For
LaTeX 2e, you can use the epsf, graphics or graphicx packages, but the
last is recommended--it has the most flexible syntax, and is briefly
-described here. Further information can be found in `grfguide' or
-`epslatex', which should be included in your LaTeX distribution in DVI,
+described here. Further information can be found in 'grfguide' or
+'epslatex', which should be included in your LaTeX distribution in DVI,
PDF, or other formats. (If you are still using LaTeX 2.09, use
epsf.sty).
@@ -1710,9 +1634,9 @@ epsf.sty).
Depending on your system, a suitable driver setup may already be
present, so that LaTeX automatically produces DVI files suitable for
-Dvips. In this case you can leave out the `[dvips]' parameter.
+Dvips. In this case you can leave out the '[dvips]' parameter.
- Now, at the point you want to include a file `foo.eps', enter a line
+ Now, at the point you want to include a file 'foo.eps', enter a line
such as:
\includegraphics{foo.eps}
@@ -1723,11 +1647,11 @@ such as:
because then you can process the same LaTeX file with different TeX
engines or DVI converters if you also provide suitable graphics files
-for them, e.g., `foo.pdf' or `foo.png'.
+for them, e.g., 'foo.pdf' or 'foo.png'.
The \includegraphics command has many options, specified in
-`key=value' syntax, to allow you to resize, rotate or trim the included
-graphic--see `grfguide' or `epslatex'. If your file does not have a
+'key=value' syntax, to allow you to resize, rotate or trim the included
+graphic--see 'grfguide' or 'epslatex'. If your file does not have a
bounding box comment, you can supply the numbers as determined in the
previous section, in the same order they would have been in a normal
bounding box comment:
@@ -1741,8 +1665,8 @@ the proper amount of space.
PostScript graphics have their origin in the lower left corner.
Therefore, in TeX, a graphic will occupy a box that extends far above
the line where it is put in, but has depth zero below it. Combining
-`\includegraphics' with `\parbox' commands or minipages can sometimes
-be confusing when this is not taken into account.
+'\includegraphics' with '\parbox' commands or minipages can sometimes be
+confusing when this is not taken into account.

File: dvips.info, Node: EPSF macros, Next: psfile special, Prev: \includegraphics, Up: PostScript figures
@@ -1750,16 +1674,16 @@ File: dvips.info, Node: EPSF macros, Next: psfile special, Prev: \includegrap
5.1.3 Using the EPSF macros
---------------------------
-If you are using LaTeX 2e, use the `graphics' or `graphicx' package.
+If you are using LaTeX 2e, use the 'graphics' or 'graphicx' package.
*Note \includegraphics::.
- If you are using plain TeX or LaTeX 2.09, you need `epsf.tex' (for
-plain TeX) and `epsf.sty' (for LaTeX). For plain TeX, add a line like
+ If you are using plain TeX or LaTeX 2.09, you need 'epsf.tex' (for
+plain TeX) and 'epsf.sty' (for LaTeX). For plain TeX, add a line like
this near the top of your input file:
\input epsf
-If you are using LaTeX 2.09, add the `epsf' style option, as in:
+If you are using LaTeX 2.09, add the 'epsf' style option, as in:
\documentstyle[12pt,epsf]{article}
@@ -1770,11 +1694,11 @@ figures you plan to include.
\epsffile{foo.eps}
- If you are using LaTeX, you may need to add `\leavevmode'
-immediately before the `\epsffile' command to get certain environments
-to work correctly. If your file does not have a bounding box comment,
-you can supply the numbers as determined in the previous section, in
-the same order they would have been in a normal bounding box comment:
+ If you are using LaTeX, you may need to add '\leavevmode' immediately
+before the '\epsffile' command to get certain environments to work
+correctly. If your file does not have a bounding box comment, you can
+supply the numbers as determined in the previous section, in the same
+order they would have been in a normal bounding box comment:
\epsffile[100 100 500 500]{foo.ps}
@@ -1782,13 +1706,13 @@ Now, save your changes and run TeX and Dvips; the output should have
your graphic positioned at precisely the point you indicated, occupying
the proper amount of space.
- The `\epsffile' macro typesets the figure as a TeX `\vbox' at the
-point of the page that the command is executed. By default, the
-graphic will have its `natural' width (namely, the width of its bounding
-box). The TeX box will have depth zero and its natural height. By
-default, the graphic will be scaled by any DVI magnification in effect,
-just as is everything else in your document. See the next section for
-more information on scaling.
+ The '\epsffile' macro typesets the figure as a TeX '\vbox' at the
+point of the page that the command is executed. By default, the graphic
+will have its 'natural' width (namely, the width of its bounding box).
+The TeX box will have depth zero and its natural height. By default,
+the graphic will be scaled by any DVI magnification in effect, just as
+is everything else in your document. See the next section for more
+information on scaling.
If you want TeX to report the size of the figure as a message on your
terminal when it processes each figure, give the command:
@@ -1797,8 +1721,8 @@ terminal when it processes each figure, give the command:
* Menu:
-* EPSF scaling::
-* EPSF clipping::
+* EPSF scaling::
+* EPSF clipping::

File: dvips.info, Node: EPSF scaling, Next: EPSF clipping, Up: EPSF macros
@@ -1811,14 +1735,14 @@ for your document, since its natural size is determined by the creator
of the EPS file.
The best way to do this is to assign the desired size to the TeX
-`\epsfxsize' or `\epsfysize' variables, whichever is more convenient
-for you. That is, put
+'\epsfxsize' or '\epsfysize' variables, whichever is more convenient for
+you. That is, put
\epsfxsize=DIMEN
-right before the call to `\epsffile'. Then the width of the TeX box
-will be DIMEN and its height will be scaled proportionately.
-Similarly, you can set the vertical size with
+right before the call to '\epsffile'. Then the width of the TeX box
+will be DIMEN and its height will be scaled proportionately. Similarly,
+you can set the vertical size with
\epsfysize=DIMEN
@@ -1830,38 +1754,37 @@ included graphic may necessarily be distorted, i.e., its contents
stretched in one direction or the other.
You can resize graphics in a more general way by redefining the
-`\epsfsize' macro. `\epsffile' calls this with two parameters: the
+'\epsfsize' macro. '\epsffile' calls this with two parameters: the
natural horizontal and vertical sizes of the PostScript graphic.
-`\epsfsize' must expand to the desired horizontal size, that is, the
-width of the `\vbox'. Schematically:
+'\epsfsize' must expand to the desired horizontal size, that is, the
+width of the '\vbox'. Schematically:
\def\epsfsize#1#2{BODY}
Some useful definitions of BODY:
-`\epsfxsize'
+'\epsfxsize'
This definition (the default) enables the default features listed
- above, by setting `\epsfxsize' to the same value it had before the
+ above, by setting '\epsfxsize' to the same value it had before the
macro was called.
-`#1'
+'#1'
Force the natural size by returning the first parameter (the
original width).
-`0pt'
- A special case, equivalent to `#1'.
+'0pt'
+ A special case, equivalent to '#1'.
-`0.5#1'
+'0.5#1'
Scale to half the natural size.
-`\hsize'
- Scale to the current `\hsize'. (In LaTeX, use `\textwidth'
- instead of `\hsize'.)
-
-`\ifnum#1>\hsize\hsize\else#1\fi'
- If the natural width is greater than the current `\hsize', scale to
- `\hsize', otherwise use the natural width.
+'\hsize'
+ Scale to the current '\hsize'. (In LaTeX, use '\textwidth' instead
+ of '\hsize'.)
+'\ifnum#1>\hsize\hsize\else#1\fi'
+ If the natural width is greater than the current '\hsize', scale to
+ '\hsize', otherwise use the natural width.
For compatibility with other PostScript drivers, it is possible to
turn off the default scaling of included figures by the DVI
@@ -1870,13 +1793,13 @@ magnification with the following TeX command:
\special{! /magscale false def}
Use of this command is not recommended because it will make the
-`\epsffile' graphics the "wrong" size if global magnification is being
+'\epsffile' graphics the "wrong" size if global magnification is being
used, and it will cause any PostScript graphics to appear improperly
scaled and out of position if a DVI to DVI program is used to scale or
otherwise modify the document.
DVI magnification is not applied to any output from code you write in
-`bop-hook' or its ilk (*note PostScript hooks::),
+'bop-hook' or its ilk (*note PostScript hooks::),

File: dvips.info, Node: EPSF clipping, Prev: EPSF scaling, Up: EPSF macros
@@ -1889,8 +1812,8 @@ because clipping to the bounding box dimensions often cuts off a small
portion of the figure, due to slightly inaccurate bounding box
arguments. The problem might be subtle; lines around the boundary of
the image might be half their intended width, or the tops or bottoms of
-some text annotations might be sliced off. If you want to turn
-clipping on, just use the command
+some text annotations might be sliced off. If you want to turn clipping
+on, just use the command
\epsfclipon
@@ -1901,76 +1824,75 @@ and to turn clipping back off, use

File: dvips.info, Node: psfile special, Next: Dynamic creation of graphics, Prev: EPSF macros, Up: PostScript figures
-5.1.4 `psfile' special
+5.1.4 'psfile' special
----------------------
The basic special for file inclusion is as follows:
\special{psfile=FILENAME.ps [KEY=VALUE] ... }
-This downloads the PostScript file `FILENAME.ps' such that the current
+This downloads the PostScript file 'FILENAME.ps' such that the current
point will be the origin of the PostScript coordinate system. The
optional KEY=VALUE assignments allow you to specify transformations on
the PostScript.
The possible KEYs are:
-`hoffset'
+'hoffset'
The horizontal offset (default 0).
-`voffset'
+'voffset'
The vertical offset (default 0).
-`hsize'
+'hsize'
The horizontal clipping size (default 612).
-`vsize'
+'vsize'
The vertical clipping size (default 792).
-`hscale'
+'hscale'
The horizontal scaling factor, as a percentage (default 100).
-`vscale'
+'vscale'
The vertical scaling factor, as a percentage (default 100).
-`angle'
+'angle'
The rotation, in degrees (default 0).
-`clip'
+'clip'
Enable clipping to the bounding box (default disabled).
-`llx, lly, urx, ury'
- Bounding box of the included image, just as in a `%%BoundingBox'
+'llx, lly, urx, ury'
+ Bounding box of the included image, just as in a '%%BoundingBox'
comment. Values are in big points, and may be fractional.
-`rhi, rwi'
+'rhi, rwi'
Desired width and height of the resulting figure in the output, in
tenths of big points (720 to the inch); may be fractional.
- If both `rwi' and `rhi' are nonzero, the picture is scaled,
- possibly losing aspect ratio. If only one of `rwi' and `rhi' is
+ If both 'rwi' and 'rhi' are nonzero, the picture is scaled,
+ possibly losing aspect ratio. If only one of 'rwi' and 'rhi' is
nonzero, the picture is scaled, preserving aspect ratio.
-
The offsets and sizes are given in PostScript units (big points).
Thus, for example:
\special{psfile=foo.ps hoffset=72 hscale=90 vscale=90}
-will shift the graphics produced by file `foo.ps' right by one inch and
+will shift the graphics produced by file 'foo.ps' right by one inch and
will draw it at 0.9 times normal size. Offsets are given relative to
the point of the special command, and are unaffected by scaling or
rotation. Rotation is counterclockwise about the origin. The order of
operations is to rotate the figure, scale it, then offset it.
For compatibility with older PostScript drivers, it is possible to
-change the units that `hscale' and `vscale' are given in. This can be
-done by redefining `@scaleunit' in `SDict' by a TeX command such as
+change the units that 'hscale' and 'vscale' are given in. This can be
+done by redefining '@scaleunit' in 'SDict' by a TeX command such as
\special{! /@scaleunit 1 def}
-The `@scaleunit' variable, which is by default 100, is what `hscale'
-and `vscale' are divided by to yield an absolute scale factor.
+The '@scaleunit' variable, which is by default 100, is what 'hscale' and
+'vscale' are divided by to yield an absolute scale factor.

File: dvips.info, Node: Dynamic creation of graphics, Next: Fonts in figures, Prev: psfile special, Up: PostScript figures
@@ -1981,26 +1903,26 @@ File: dvips.info, Node: Dynamic creation of graphics, Next: Fonts in figures,
PostScript is an excellent page description language--but it does tend
to be rather verbose. Compressing PostScript graphics files can reduce
them by factor of five or more. For this reason, if the name of an
-included PostScript file ends with `.Z' or `.gz', Dvips automatically
-runs `gzip -d'. For example:
+included PostScript file ends with '.Z' or '.gz', Dvips automatically
+runs 'gzip -d'. For example:
\epsffile[72 72 540 720]{foo.ps.gz}
Since the results of such a command are not accessible to TeX, if you
-use this facility with the `epsf' macros, you need to supply the
+use this facility with the 'epsf' macros, you need to supply the
bounding box parameter yourself, as shown.
More generally, if the filename parameter to one of the graphics
-inclusion techniques starts with a left quote (``'), the parameter is
+inclusion techniques starts with a left quote ('`'), the parameter is
instead interpreted as a command to execute that will send the actual
file to standard output. For example:
\special{psfile="`gnuplot foo"}
-to include the file `foo'. Of course, the command to be executed can
-be anything, including using a file conversion utility such as `tek2ps'
-or whatever is appropriate. This feature can be disabled with the `-R'
-command-line option or `R' configuration option.
+to include the file 'foo'. Of course, the command to be executed can be
+anything, including using a file conversion utility such as 'tek2ps' or
+whatever is appropriate. This feature can be disabled with the '-R'
+command-line option or 'R' configuration option.

File: dvips.info, Node: Fonts in figures, Prev: Dynamic creation of graphics, Up: PostScript figures
@@ -2009,7 +1931,7 @@ File: dvips.info, Node: Fonts in figures, Prev: Dynamic creation of graphics,
----------------------
You can use any font available to TeX and Dvips within a graphics file
-by putting a `%*Font:' line in the leading commentary of the file.
+by putting a '%*Font:' line in the leading commentary of the file.
Schematically, this looks like:
%*Font: TFMNAME SCALEDBP DESIGNBP HEX-START:HEX-BITSTRING
@@ -2017,10 +1939,10 @@ Schematically, this looks like:
Here is the meaning of each of these elements:
TFMNAME
- The TeX TFM filename, e.g., `cmr10'. You can give the same
- TFMNAME on more than one `%*Font' line; this is useful when the
- number of characters from the font used needs a longer
- HEX-BITSTRING (see item below) than conveniently fits on one line.
+ The TeX TFM filename, e.g., 'cmr10'. You can give the same TFMNAME
+ on more than one '%*Font' line; this is useful when the number of
+ characters from the font used needs a longer HEX-BITSTRING (see
+ item below) than conveniently fits on one line.
SCALEDBP
The size at which you are using the font, in PostScript points (TeX
@@ -2028,24 +1950,23 @@ SCALEDBP
DESIGNBP
The designsize of the font, again in PostScript points. This
- should match the value in the TFM file TFMNAME. Thus, for `cmr10',
- it should be `9.96265'.
+ should match the value in the TFM file TFMNAME. Thus, for 'cmr10',
+ it should be '9.96265'.
HEX-START
The character code of the first character used from the font,
- specified as two ASCII hexadecimal characters, e.g., `4b' or `4B'
- for `K'.
+ specified as two ASCII hexadecimal characters, e.g., '4b' or '4B'
+ for 'K'.
HEX-BITSTRING
An arbitrary number of ASCII hexadecimal digits specifying which
characters following (and including) HEX-START are used. This is
treated as a bitmap. For example, if your figure used the single
- letter `K', you would use `4b:8' for HEX-START and HEX-BITSTRING.
- If it used `KLMNP', you would use `4b:f4'.
-
+ letter 'K', you would use '4b:8' for HEX-START and HEX-BITSTRING.
+ If it used 'KLMNP', you would use '4b:f4'.
MetaPost's output figures contain lines like this for bitmap fonts
-used in a MetaPost label (*note MetaPost: (web2c)MetaPost.).
+used in a MetaPost label (*note (web2c)MetaPost::).

File: dvips.info, Node: Header files, Next: Literal PS, Prev: PostScript figures, Up: Interaction with PostScript
@@ -2061,20 +1982,20 @@ some special effect.
Dvips includes some headers on its own initiative, to implement
features such as PostScript font reencoding, bitmap font downloading,
-handling of `\special''s, and so on. These standard headers are the
-`.pro' files (for "prologue") in the installation directory
-`$(psheaderdir)'; they are created from the `.lpro' ("long prologue")
+handling of '\special''s, and so on. These standard headers are the
+'.pro' files (for "prologue") in the installation directory
+'$(psheaderdir)'; they are created from the '.lpro' ("long prologue")
files in the distribution by stripping comments, squeezing blank lines,
-etc., for maximum efficiency. If you want to peruse one of the
-standard header files, read the `.lpro' version.
+etc., for maximum efficiency. If you want to peruse one of the standard
+header files, read the '.lpro' version.
- The PostScript dictionary stack will be at the `userdict' level when
+ The PostScript dictionary stack will be at the 'userdict' level when
header files are included.
* Menu:
-* Including headers from TeX::
-* Including headers from the command line::
+* Including headers from TeX::
+* Including headers from the command line::
* Headers and memory usage::

@@ -2085,43 +2006,43 @@ File: dvips.info, Node: Including headers from TeX, Next: Including headers fr
In order to get a particular graphic file to work, a certain font or
header file might need to be sent first. The Dvips program provides
-support for this with the `header' `\special'. For instance, to ensure
-that `foo.ps' gets downloaded:
+support for this with the 'header' '\special'. For instance, to ensure
+that 'foo.ps' gets downloaded:
\special{header=foo.ps}
As another example, if you have some PostScript code that uses a
PostScript font not built into your printer, you must download it to the
-printer. If the font isn't used elsewhere in the document, Dvips can't
+printer. If the font isn't used elsewhere in the document, Dvips can't
know you've used it, so you must include it in the same way, as in:
\special{header=putr.pfa}
to include the font definition file for Adobe Utopia Roman.
- The `header' also special allows for specifying some additional code
+ The 'header' also special allows for specifying some additional code
that should be inserted into the PostScript document before and after
the file itself, as follows:
\special{header={foo.ps} pre={pre code} post={post code}}
- This will insert `pre code' just before `foo.ps' and `post code'
-just after. It is required to use the (balanced) braces in _all_ of
-the arguments, including the `header', when using this extended syntax.
+ This will insert 'pre code' just before 'foo.ps' and 'post code' just
+after. It is required to use the (balanced) braces in _all_ of the
+arguments, including the 'header', when using this extended syntax.
This allows, for instance, dynamic headers, where some of the content
-depends on settings from the user in (La)TeX. Another application is
-the inclusion of graphics inside the PostScript header, so that they
-can be reused throughout the document, as with logs. That avoids
-including the same graphic several times. This is implemented in the
-`graphics/graphicx-psmin' package.
-
- This extended syntax has one additional feature. When Dvips finds the
-extended syntax, it will also look in the installed `tex/' tree(s) for
-the header file (`foo.ps' in our example), and not only in the current
-directory and dvips tree as the original syntax does. This is because
-common graphics may well come with packages which are installed in the
-`tex/' tree.
+depends on settings from the user in (La)TeX. Another application is
+the inclusion of graphics inside the PostScript header, so that they can
+be reused throughout the document, as with logs. That avoids including
+the same graphic several times. This is implemented in the
+'graphics/graphicx-psmin' package.
+
+ This extended syntax has one additional feature. When Dvips finds
+the extended syntax, it will also look in the installed 'tex/' tree(s)
+for the header file ('foo.ps' in our example), and not only in the
+current directory and dvips tree as the original syntax does. This is
+because common graphics may well come with packages which are installed
+in the 'tex/' tree.

File: dvips.info, Node: Including headers from the command line, Next: Headers and memory usage, Prev: Including headers from TeX, Up: Header files
@@ -2131,18 +2052,18 @@ File: dvips.info, Node: Including headers from the command line, Next: Headers
You can include headers when you run Dvips, as well as from your
document (see the previous section). To do this, run Dvips with the
-option `-P HEADER'; this will read the file `config.HEADER', which in
-turn can specify a header file to be downloaded with the `h' option.
+option '-P HEADER'; this will read the file 'config.HEADER', which in
+turn can specify a header file to be downloaded with the 'h' option.
*Note Configuration file commands::. These files are called
-`HEADER.cfg' on MS-DOS.
+'HEADER.cfg' on MS-DOS.
- You can arrange for the same file to serve as a `-P' config file and
+ You can arrange for the same file to serve as a '-P' config file and
the downloadable header file, by starting the lines of PostScript code
-with a space, leaving only the `h' line and any comments starting in
-the first column. As an example, see `contrib/volker/config.*'
-(`contrib/volker/*.cfg' on MS-DOS). (These files also perform useful
+with a space, leaving only the 'h' line and any comments starting in the
+first column. As an example, see 'contrib/volker/config.*'
+('contrib/volker/*.cfg' on MS-DOS). (These files also perform useful
functions: controlling duplex/simplex mode on duplex printers, and
-setting various screen frequencies; `contrib/volker/README' explains
+setting various screen frequencies; 'contrib/volker/README' explains
further.)

@@ -2152,17 +2073,25 @@ File: dvips.info, Node: Headers and memory usage, Prev: Including headers from
------------------------------
Dvips tries to avoid overflowing the printer's memory by splitting the
-output files into "sections" (see the `-i' option in *note Option
+output files into "sections" (see the '-i' option in *note Option
details::). Therefore, for all header files, Dvips debits the printer
VM budget by some value. If the header file has, in its leading
commentary a line of the form
%%VMusage: MIN MAX
-then MAX is used. If there is no `%%VMusage' line, then the size (in
-bytes) of the header file is used as an approximation.
+then MAX is used. If there is no '%%VMusage' line, then the size (in
+bytes) of the header file is used as an approximation. If you want a
+file to be ignored in the sectioning calculations, use '%%VMusage: 0 0'.
+
+ Illustrations (figure files) are also checked for '%%VMusage' line.
- Illustrations (figure files) are also checked for `%%VMusage' line.
+ Therefore, if your document uses very large fonts or very large
+included figures, Dvips might take it upon itself to split the output
+into unwanted sections. If this causes problems, the simplest solution
+is to use 'dvips -Pmaxmem', which reads the Dvips file 'config.maxmem',
+which sets Dvips's idea of the memory available to a very large number.
+(See the 'm' item in *note Configuration file commands::.)

File: dvips.info, Node: Literal PS, Next: Hypertext, Prev: Header files, Up: Interaction with PostScript
@@ -2177,19 +2106,19 @@ ways.
* " special:: To include inline PostScript code.
* ps special:: Inline PostScript without save/restore.
-* PostScript hooks:: Specifying code to run in the PS interpreter.
* Literal headers:: Literal PostScript for the whole document.
+* PostScript hooks:: Specifying code to run in the PS interpreter.
* Literal examples:: Neat example.

File: dvips.info, Node: " special, Next: ps special, Up: Literal PS
-5.3.1 `"' special: Literal PostScript
+5.3.1 '"' special: Literal PostScript
-------------------------------------
For simple graphics, or just for experimentation, literal PostScript
-code can be included. Simply use a `\special' beginning with a double
-quote character `"'; there is no matching closing `"'.
+code can be included. Simply use a '\special' beginning with a double
+quote character '"'; there is no matching closing '"'.
For instance, the following (simple) graphic:
@@ -2202,17 +2131,17 @@ was created by typing:
closepath gsave 0.8 setgray fill grestore stroke}}
You are responsible for leaving space for such literal graphics, as
-with the `\vbox' above.
+with the '\vbox' above.

-File: dvips.info, Node: ps special, Next: PostScript hooks, Prev: " special, Up: Literal PS
+File: dvips.info, Node: ps special, Next: Literal headers, Prev: " special, Up: Literal PS
-5.3.2 `ps' special
+5.3.2 'ps' special
------------------
Generally, Dvips encloses specials in a PostScript save/restore pair,
guaranteeing that the special will have no effect on the rest of the
-document. The `ps' special, however, allows you to insert literal
+document. The 'ps' special, however, allows you to insert literal
PostScript instructions without this protective shield; you should
understand what you're doing (and you shouldn't change the PostScript
graphics state unless you are willing to take the consequences). This
@@ -2226,12 +2155,11 @@ of the following will work:
\special{ps::[nobreak]TEXT}
(with longer forms taking precedence over shorter forms, when they are
-present). `ps::' and `ps::[end]' do no positioning, so they can be
-used to continue PostScript literals started with `ps:' or
-`ps::[begin]'.
+present). 'ps::' and 'ps::[end]' do no positioning, so they can be used
+to continue PostScript literals started with 'ps:' or 'ps::[begin]'.
- Literal PostScript instructions after `ps::[nobreak]' are _not_
-broken into lines. This feature may be used to include PostScript
+ Literal PostScript instructions after 'ps::[nobreak]' are _not_
+broken into lines. This feature may be used to include PostScript
comments, for example.
In addition, the variant
@@ -2240,29 +2168,29 @@ comments, for example.
inserts the contents of FILENAME verbatim into the output (except for
omitting lines that begin with %). An example of the proper use of
-literal specials can be found in the file `rotate.tex', which makes it
+literal specials can be found in the file 'rotate.tex', which makes it
easy to typeset text turned in multiples of 90 degrees.

-File: dvips.info, Node: Literal headers, Next: Literal examples, Prev: PostScript hooks, Up: Literal PS
+File: dvips.info, Node: Literal headers, Next: PostScript hooks, Prev: ps special, Up: Literal PS
-5.3.3 Literal headers: `!' `\special'
+5.3.3 Literal headers: '!' '\special'
-------------------------------------
You can download literal PostScript header code in your TeX document,
for use with (for example) literal graphics code that you include later.
-The text of a `\special' beginning with an `!' is copied into the
-output file. A dictionary `SDict' will be current when this code is
-executed; Dvips arranges for `SDict' to be first on the dictionary
-stack when any PostScript graphic is included, whether literally (the
-`"' special) or through macros (e.g., `epsf.tex').
+The text of a '\special' beginning with an '!' is copied into the output
+file. A dictionary 'SDict' will be current when this code is executed;
+Dvips arranges for 'SDict' to be first on the dictionary stack when any
+PostScript graphic is included, whether literally (the '"' special) or
+through macros (e.g., 'epsf.tex').
For example:
\special{! /reset { 0 0 moveto} def}

-File: dvips.info, Node: PostScript hooks, Next: Literal headers, Prev: ps special, Up: Literal PS
+File: dvips.info, Node: PostScript hooks, Next: Literal examples, Prev: Literal headers, Up: Literal PS
5.3.4 PostScript hooks
----------------------
@@ -2272,40 +2200,40 @@ document (as described in the previous section), you can also arrange to
execute arbitrary PostScript code at particular times while the
PostScript is printing.
- If any of the PostScript names `bop-hook', `eop-hook', `start-hook',
-or `end-hook' are defined in `userdict', they will be executed at the
+ If any of the PostScript names 'bop-hook', 'eop-hook', 'start-hook',
+or 'end-hook' are defined in 'userdict', they will be executed at the
beginning of a page, end of a page, start of the document, and end of a
document, respectively.
When these macros are executed, the default PostScript coordinate
system and origin is in effect. Such macros can be defined in headers
-added by the `-h' option or the `header=' special, and might be useful
-for writing, for instance, `DRAFT' across the entire page, or, with the
+added by the '-h' option or the 'header=' special, and might be useful
+for writing, for instance, 'DRAFT' across the entire page, or, with the
aid of a shell script, dating the document. These macros are executed
outside of the save/restore context of the individual pages, so it is
possible for them to accumulate information, but if a document must be
divided into sections because of memory constraints, such added
information will be lost across section breaks.
- The single argument to `bop-hook' is the physical page number; the
-first page gets zero, the second one, etc. `bop-hook' must leave this
+ The single argument to 'bop-hook' is the physical page number; the
+first page gets zero, the second one, etc. 'bop-hook' must leave this
number on the stack. None of the other hooks are passed arguments.
- As an example of what can be done, the following special will write
-a light grey `DRAFT' across each page in the document:
+ As an example of what can be done, the following special will write a
+light grey 'DRAFT' across each page in the document:
\special{!userdict begin /bop-hook{gsave 200 30 translate
65 rotate /Times-Roman findfont 216 scalefont setfont
0 0 moveto 0.7 setgray (DRAFT) show grestore}def end}
- Using `bop-hook' or `eop-hook' to preserve information across pages
-breaks compliance with the Adobe document structuring conventions, so
-if you use any such tricks, you may also want to use the `-N' option to
-turn off structured comments (such as `%%Page'). Otherwise, programs
+ Using 'bop-hook' or 'eop-hook' to preserve information across pages
+breaks compliance with the Adobe document structuring conventions, so if
+you use any such tricks, you may also want to use the '-N' option to
+turn off structured comments (such as '%%Page'). Otherwise, programs
that read your file will assume its pages are independent.

-File: dvips.info, Node: Literal examples, Prev: Literal headers, Up: Literal PS
+File: dvips.info, Node: Literal examples, Prev: PostScript hooks, Up: Literal PS
5.3.5 Literal examples
----------------------
@@ -2319,8 +2247,8 @@ are presented without explanation:
\special{ps:gsave}\rotninety\copy0\rotninety\copy0\rotninety
\box0\special{ps:grestore}}\vskip16truept
- [ There are 4 `A' characters, each rotated 90 degrees about a
-common center point ]
+ [ There are 4 'A' characters, each rotated 90 degrees about a common
+center point ]
\vbox to 2truein{\special{ps:gsave 0.3 setgray}\hrule height 2in
width\hsize\vskip-2in\special{ps:grestore}\font\big=cminch\big
@@ -2328,15 +2256,15 @@ common center point ]
\line{\hss\hskip4pt NEAT\hss}\vss}\special{ps:0 setgray}%
\hbox{\raise2pt\line{\hss NEAT\hss}\special{ps:grestore}}\vss}
- [ There is a big gray box with the word `NEAT' inside in big letters
+ [ There is a big gray box with the word 'NEAT' inside in big letters
]
- Some caveats are in order, however. Make sure that each `gsave' is
-matched with a `grestore' on the same page. Do not use `save' and
-`restore'; they can interact with the PostScript generated by Dvips if
+ Some caveats are in order, however. Make sure that each 'gsave' is
+matched with a 'grestore' on the same page. Do not use 'save' and
+'restore'; they can interact with the PostScript generated by Dvips if
care is not taken. Try to understand what the above macros are doing
-before writing your own. The `\rotninety' macro especially has a
-useful trick that appears again and again.
+before writing your own. The '\rotninety' macro especially has a useful
+trick that appears again and again.

File: dvips.info, Node: Hypertext, Prev: Literal PS, Up: Interaction with PostScript
@@ -2345,30 +2273,30 @@ File: dvips.info, Node: Hypertext, Prev: Literal PS, Up: Interaction with Pos
=============
Dvips has support for producing hypertext PostScript documents. If you
-specify the `-z' option, the `html:' specials described below will be
-converted into `pdfmark' PostScript operators to specify links.
-Without `-z', `html:' specials are ignored.
+specify the '-z' option, the 'html:' specials described below will be
+converted into 'pdfmark' PostScript operators to specify links. Without
+'-z', 'html:' specials are ignored.
- The resulting PostScript can then be processed by a distiller
-program to make a PDF file. (It can still be handled by ordinary
-PostScript interpreters as well.) Various versions of both PC and Unix
-distillers are supported; Ghostscript includes limited distiller support
-(*note Ghostscript installation::).
+ The resulting PostScript can then be processed by a distiller program
+to make a PDF file. (It can still be handled by ordinary PostScript
+interpreters as well.) Various versions of both PC and Unix distillers
+are supported; Ghostscript includes limited distiller support (*note
+Ghostscript installation::).
Macros you can use in your TeX document to insert the specials in the
-first place are available from `CTAN:/support/hypertex'. For CTAN
-info, *note unixtex.ftp: (kpathsea)unixtex.ftp.
+first place are available from 'CTAN:/support/hypertex'. For CTAN info,
+*note (kpathsea)unixtex.ftp::.
This hypertext support (and original form of the documentation) was
-written by Mark Doyle and Tanmoy Bhattacharya as the `dvihps' program.
+written by Mark Doyle and Tanmoy Bhattacharya as the 'dvihps' program.
You can retrieve their software and additional documentation via the
CTAN reference above. You may also be interested in the Java previewer
-IDVI, available at `http://www.win.tue.nl/~dickie/idvi', and/or in
-`http://www.emrg.com/texpdf.html', which describes the process of
-making PDF files from TeX files in more detail.
+IDVI, available at <http://www.win.tue.nl/~dickie/idvi>, and/or in
+<http://www.emrg.com/texpdf.html>, which describes the process of making
+PDF files from TeX files in more detail.
Mail archives for the original project are at
-`http://math.albany.edu:8800/hm/ht/'.
+<http://math.albany.edu:8800/hm/ht/>.
* Menu:
@@ -2393,7 +2321,7 @@ They can also be converted to PDF files that can be used effectively at
any screen or printer resolution.
To get the TeX fonts embedded in the PostScript file as Type 1 fonts,
-add `-Ppdf' to the dvips command line switches. The printout for a run
+add '-Ppdf' to the dvips command line switches. The printout for a run
should look something like this:
dvips report -Ppdf -o report.ps
@@ -2409,54 +2337,53 @@ should look something like this:
Computer Modern Roman 10 point font in a PostScript Font Binary file,
translated it to an ASCII encoding, and embedded it. You can confirm
this by examining the PostScript output file, looking for the section
-starting `%%BeginFont: CMR10' followed by an entry `/FontType 1 def'.
+starting '%%BeginFont: CMR10' followed by an entry '/FontType 1 def'.
- The `-Ppdf' option requires that the relevant outline (`.pfa' or
-`.pfb') files be installed (*note Font concepts::). For example, the
-`cmr10' file might be in
-`/usr/share/texmf/fonts/type1/bluesky/cm/cmr10.pfb'. Your TeX
+ The '-Ppdf' option requires that the relevant outline ('.pfa' or
+'.pfb') files be installed (*note Font concepts::). For example, the
+'cmr10' file might be in
+'/usr/share/texmf/fonts/type1/bluesky/cm/cmr10.pfb'. Your TeX
distribution may make those fonts available in a separate optional
-package (e.g., `tetex-extra' in Debian). Failing that, commercial
+package (e.g., 'tetex-extra' in Debian). Failing that, commercial
versions of the Computer Modern fonts are available from Blue Sky;
public domain versions - in particular, the lm fonts, and the cm-super
-fonts, are available from CTAN sites (for CTAN info, *note unixtex.ftp:
-(kpathsea)unixtex.ftp.).
+fonts, are available from CTAN sites (for CTAN info, *note
+(kpathsea)unixtex.ftp::).
- You can convert a PostScript file to PDF using `distill', which
-comes with Adobe Acrobat, or `ps2pdf', which comes with Ghostscript.
-The `ps2pdf' that comes with `Ghostscript' version 6.0 or earlier will
-not embed Type 1 fonts. Current recommendations are GNU Ghostscript
-6.51 or Aladdin Ghostscript 7.0. You can check the fonts in a PDF file
-with Acrobat Reader by selecting the menu entries `File|Document
-Info|Fonts'.
+ You can convert a PostScript file to PDF using 'distill', which comes
+with Adobe Acrobat, or 'ps2pdf', which comes with Ghostscript. The
+'ps2pdf' that comes with 'Ghostscript' version 6.0 or earlier will not
+embed Type 1 fonts. Current recommendations are GNU Ghostscript 6.51 or
+Aladdin Ghostscript 7.0. You can check the fonts in a PDF file with
+Acrobat Reader by selecting the menu entries 'File|Document Info|Fonts'.
Also, the Adobe distillers prior to 2.1 drop trailing space
characters (character code 32) from strings. Unfortunately, the
-PostScript fonts use this character code for characters other than
-space (notably the Greek letter psi in the `Symbol' font), and so these
+PostScript fonts use this character code for characters other than space
+(notably the Greek letter psi in the 'Symbol' font), and so these
characters are dropped. This bug is fixed in version 2.1.
If you can't upgrade, One workaround is to change all the trailing
-blanks in strings to a character code that isn't in the font. This works
-because the default behavior is to substitute a blank for a missing
-character, i.e., the distiller is fooled into substituting the right
-character. For instance, with the Blue Sky fonts, you can globally
-replace ` )' with `\200)' (with `sed', for example) and get the desired
-result. With the public domain fonts, you will probably have to use a
-character code in the range 128 to 191 since these fonts duplicate the
-first 32 characters starting at 192 to avoid MS-DOS problems.
+blanks in strings to a character code that isn't in the font. This
+works because the default behavior is to substitute a blank for a
+missing character, i.e., the distiller is fooled into substituting the
+right character. For instance, with the Blue Sky fonts, you can
+globally replace ' )' with '\200)' (with 'sed', for example) and get the
+desired result. With the public domain fonts, you will probably have to
+use a character code in the range 128 to 191 since these fonts duplicate
+the first 32 characters starting at 192 to avoid MS-DOS problems.
For more information on the use of TeX to produce PDF files, see the
article "Creating quality Adobe PDF files from TeX with DVIPS" by
Kendall Whitehouse of Adobe. Adobe seems not to offer the article any
more, but copies are available elsewhere:
- `http://www.math.hawaii.edu/~ralph/MathOnWeb/TeXPDF.html'
- `http://www.utdallas.edu/~cantrell/online/543e.html'
+ <http://www.math.hawaii.edu/~ralph/MathOnWeb/TeXPDF.html>
+ <http://www.utdallas.edu/~cantrell/online/543e.html>
You may also want to check "Notes on converting (La)TeX documents to
robust PDF using Rokicki's dvips and Acrobat Distiller" by Timothy P.
Van Zandt:
-`http://www.emrg.com/texpdf.htmlhttp://zandtwerk.insead.fr/tex2pdf.html'.
+<http://www.emrg.com/texpdf.htmlhttp://zandtwerk.insead.fr/tex2pdf.html>.

File: dvips.info, Node: Hypertext specials, Prev: Hypertext caveats, Up: Hypertext
@@ -2465,62 +2392,62 @@ File: dvips.info, Node: Hypertext specials, Prev: Hypertext caveats, Up: Hype
------------------------
Current support for the World Wide Web in the TeX system does not
-involve modifying TeX itself. We need only define some specials;
-Arthur Smith (<apsmith@aps.org>), Tanmoy Bhattacharya, and Paul
-Ginsparg originally proposed and implemented the following:
+involve modifying TeX itself. We need only define some specials; Arthur
+Smith (<apsmith@aps.org>), Tanmoy Bhattacharya, and Paul Ginsparg
+originally proposed and implemented the following:
html:<a href="XURL">
html:<a name="NAME">
html:</a>
html:<img src="XURL">
html:<base href="XURL">
- Like all TeX `\special''s, these produce no visible output, and are
+ Like all TeX '\special''s, these produce no visible output, and are
uninterpreted by TeX itself. They are instructions to DVI processors
only.
- Here, XURL is a standard WWW uniform resource locator (URL),
-possibly extended with a `#TYPE.STRING' construct, where TYPE is
-`page', `section', `equation', `reference' (for bibliographic
-references), `figure', `table', etc. For example,
+ Here, XURL is a standard WWW uniform resource locator (URL), possibly
+extended with a '#TYPE.STRING' construct, where TYPE is 'page',
+'section', 'equation', 'reference' (for bibliographic references),
+'figure', 'table', etc. For example,
\special{html:<a href="http://www.maths.tcd.ie/~tim/ch1.dvi#equation.1.1">}
- is a link to equation (1.1) in an example document by Tim Murphy.
+is a link to equation (1.1) in an example document by Tim Murphy.
See the URL
-`http://www.w3.org/hypertext/WWW/Addressing/Addressing.html' for a
+<http://www.w3.org/hypertext/WWW/Addressing/Addressing.html> for a
precise description of base URL's.
- Descriptions of the `\special''s:
-`href'
- Creates links in your TeX document. For example:
+ Descriptions of the '\special''s:
+'href'
+ Creates links in your TeX document. For example:
\special{html:<a href="http://www.tug.org/">}\TeX\ Users
Group\special{html:</a>}
- The user will be able to click on the text `TeX Users Group' while
+ The user will be able to click on the text 'TeX Users Group' while
running Xdvi and get to the TUG home page. (By the way, this is
- for illustration. In practice, you most likely want to use macros
- to insert the `\special' commands; reference above.)
+ for illustration. In practice, you most likely want to use macros
+ to insert the '\special' commands; reference above.)
-`name'
+'name'
Defines URL targets in your TeX documents, so links can be
- resolved. For example:
+ resolved. For example:
\special{html:<a name="paradise">}Paradise\special{html:</a>}
is exactly where you are right now.
- This will resolve an `href="#paradise"'. You'll also have to
- change the catcode of `#', etc. It's usually easiest to use
+ This will resolve an 'href="#paradise"'. You'll also have to
+ change the catcode of '#', etc. It's usually easiest to use
existing macro packages which take care of all the details, such as
- `hyperref' for LaTeX. The HyperTeX FAQ
+ 'hyperref' for LaTeX. The HyperTeX FAQ
(http://arxiv.org/hypertex/) has more information.
-`img'
+'img'
Links to an arbitrary external file. Interactively, a viewer is
spawned to read the file according to the file extension and your
- `mailcap' file (see the Xdvi documentation).
+ 'mailcap' file (see the Xdvi documentation).
-`base'
- Defines a base URL that is prepended to all the `name' targets.
+'base'
+ Defines a base URL that is prepended to all the 'name' targets.
Typically unnecessary, as the name of the DVI file being read is
used by default.
- The `img' and `base' tags are not yet implemented in Dvips or the
+ The 'img' and 'base' tags are not yet implemented in Dvips or the
NeXTSTEP DVI viewer.

@@ -2534,12 +2461,12 @@ PostScript font conveniently, you need to prepare a corresponding
virtual font; the program Afm2tfm, supplied with Dvips, helps with that.
All the necessary support for the standard 35 PostScript fonts
-(`AvantGarde-Book' through `ZapfDingbats'), plus other freely or
+('AvantGarde-Book' through 'ZapfDingbats'), plus other freely or
commonly available PostScript fonts is available along with Dvips. To
use these fonts, you need do nothing beyond what is mentioned in the
installation procedure (*note Installation::). This chapter is
therefore relevant only if you are installing new PostScript fonts not
-supplied with Dvips. (Or if you're curious.)
+supplied with Dvips. (Or if you're curious.)
* Menu:
@@ -2557,10 +2484,10 @@ File: dvips.info, Node: Font concepts, Next: Making a font available, Up: Pos
The information needed to typeset using a particular font is contained
in two files: a "metric file" that contains shape-independent
information and a "glyph file" that contains the actual shapes of the
-font's characters. A "virtual font" is an optional additional file
-that can specify special ways to construct the characters. TeX itself
-(or LaTeX) look only at the metric file, but DVI drivers such as Dvips
-look at all three of these files.
+font's characters. A "virtual font" is an optional additional file that
+can specify special ways to construct the characters. TeX itself (or
+LaTeX) look only at the metric file, but DVI drivers such as Dvips look
+at all three of these files.
An "encoding file" defines the correspondence between the code
numbers of the characters in a font and their descriptive names. Two
@@ -2581,11 +2508,11 @@ File: dvips.info, Node: Metric files, Next: Glyph files, Up: Font concepts
6.1.1 Metric files
------------------
-A "metric file" describes properties of the font that are independent
-of what the characters actually look like. Aside from general
-information about the font itself, a metric file has two kinds of
-information: information about individual characters, organized by
-character code, and information about sequences of characters.
+A "metric file" describes properties of the font that are independent of
+what the characters actually look like. Aside from general information
+about the font itself, a metric file has two kinds of information:
+information about individual characters, organized by character code,
+and information about sequences of characters.
The per-character information specifies the width, height, depth, and
italic correction of each character in the font. Any might be zero.
@@ -2595,40 +2522,38 @@ specifies "kerning", i.e., adding or removing space between particular
character pairs. It further specifies "ligature" information: when a
sequence of input characters should be typeset as a single (presumably
different) "ligature" character. For example, it's traditional for the
-input `fi' to be typeset as `fi', not as `fi' (with the dot of the `i'
-colliding with `f'). (In English, the only common ligatures are fi,
-fl, ff, ffi, and ffl.)
+input 'fi' to be typeset as 'fi', not as 'fi' (with the dot of the 'i'
+colliding with 'f'). (In English, the only common ligatures are fi, fl,
+ff, ffi, and ffl.)
Different typesetting systems use different metric file formats:
- * Each Postscript font has an "Adobe font metrics" (`.afm') file.
+ * Each Postscript font has an "Adobe font metrics" ('.afm') file.
These files are plain text, so you can inspect them easily. You
can get AFM files for Adobe's fonts from
- `ftp://ftp.adobe.com/pub/adobe/Fonts/AFMs'.
+ <ftp://ftp.adobe.com/pub/adobe/Fonts/AFMs>.
- * TeX uses "TeX font metrics" (`.tfm') files. When you say `\font =
- FONT' in your TeX document, TeX reads a file named `FONT.tfm'.
- (Well, except for the `texfonts.map' feature; *note Fontmap:
- (kpathsea)Fontmap.). TeX can then calculate the space occupied by
- characters from the font when typesetting. In addition, the DVI
+ * TeX uses "TeX font metrics" ('.tfm') files. When you say '\font =
+ FONT' in your TeX document, TeX reads a file named 'FONT.tfm'.
+ (Well, except for the 'texfonts.map' feature; *note
+ (kpathsea)Fontmap::). TeX can then calculate the space occupied by
+ characters from the font when typesetting. In addition, the DVI
drivers you use to print or view the DVI file produced by TeX may
need to look at the TFM file.
TFM files are binary (and hence are typically much smaller than AFM
- files). You can use the `tftopl' program (*note tftopl invocation:
- (web2c)tftopl invocation.) that comes with TeX to transform a TFM
- file into a human-readable "property list" (`.pl') file. You can
- also edit a PL file and transform it back to a TeX-readable TFM
- with the companion program `pltotf' (*note pltotf invocation:
- (web2c)pltotf invocation.). Editing metrics by hand is not
- something you're likely to want to do often, but the capability is
- there.
+ files). You can use the 'tftopl' program (*note (web2c)tftopl
+ invocation::) that comes with TeX to transform a TFM file into a
+ human-readable "property list" ('.pl') file. You can also edit a
+ PL file and transform it back to a TeX-readable TFM with the
+ companion program 'pltotf' (*note (web2c)pltotf invocation::).
+ Editing metrics by hand is not something you're likely to want to
+ do often, but the capability is there.
* ATM and other typesetting systems use "printer font metric"
- (`.pfm') files. These are binary files. They are irrelevant in the
- TeX world, and not freely available, so we will not discuss them
- further.
-
+ ('.pfm') files. These are binary files. They are irrelevant in
+ the TeX world, and not freely available, so we will not discuss
+ them further.
The Afm2tfm program distributed with Dvips converts an AFM file to a
TFM file and performs other useful transformations as well. *Note
@@ -2643,42 +2568,42 @@ File: dvips.info, Node: Glyph files, Next: Virtual fonts, Prev: Metric files,
Although a metric file (see the previous section) contains information
about the spatial and other properties of the character at position 75,
say, it contains nothing about what the character at position 75
-actually looks like. The glyphs--the actual shapes of the letterforms
+actually looks like. The glyphs--the actual shapes of the letterforms
in a font--are defined by other files, which we call glyph files. TeX
itself only reads the TFM file for a font; it does not need to know
character shapes.
- A "glyph file" is a file that defines the shapes of the characters
-in a font. The shapes can be defined either by outlines or by bitmaps.
+ A "glyph file" is a file that defines the shapes of the characters in
+a font. The shapes can be defined either by outlines or by bitmaps.
PostScript fonts are defined as "outline fonts": Each character in
the font is defined by giving the mathematical curves (lines, arcs, and
splines) that define its contours. Different sizes of a character are
-generated by linearly scaling a single shape. For example, a 10-point
-`A' is simply half the size of a 20-point `A'. Nowadays, outline fonts
+generated by linearly scaling a single shape. For example, a 10-point
+'A' is simply half the size of a 20-point 'A'. Nowadays, outline fonts
usually also contain "hints"--additional information to improve the
appearance of the font at small sizes or low resolutions.
Although various kinds of PostScript outline fonts exist, by far the
-most common, and the only one we will consider, is called "Type 1".
-The glyph files for Postscript Type 1 fonts typically have names ending
-in `.pfa' ("printer font ASCII") or `.pfb' ("printer font binary").
+most common, and the only one we will consider, is called "Type 1". The
+glyph files for Postscript Type 1 fonts typically have names ending in
+'.pfa' ("printer font ASCII") or '.pfb' ("printer font binary").
In contrast, glyph files for Computer Modern and the other standard
-TeX fonts are "bitmap fonts", generated from Metafont (`.mf')
+TeX fonts are "bitmap fonts", generated from Metafont ('.mf')
descriptions. The Metafont program distributed with TeX generates
bitmaps from these descriptions.
The glyph files for TeX bitmap fonts are usually stored in "packed
-font" (PK) files. The names of these files end in `.NNNpk', where NNN
+font" (PK) files. The names of these files end in '.NNNpk', where NNN
is the resolution of the font in dots per inch. For example,
-`cmr10.600pk' contains the bitmaps for the `cmr10' font at a resolution
-of 600dpi. (On DOS filesystems, it's more likely `dpi600\cmr10.pk'.)
+'cmr10.600pk' contains the bitmaps for the 'cmr10' font at a resolution
+of 600dpi. (On DOS filesystems, it's more likely 'dpi600\cmr10.pk'.)
Metafont actually outputs "generic font" (GF) files, e.g.,
-`cmr10.600gf', but the GF files are usually converted immediately to PK
-format (using the `gftopk' utility that comes with TeX) since PK files
-are smaller and contain the same information. (The GF format is a
+'cmr10.600gf', but the GF files are usually converted immediately to PK
+format (using the 'gftopk' utility that comes with TeX) since PK files
+are smaller and contain the same information. (The GF format is a
historical artifact.)

@@ -2690,20 +2615,19 @@ File: dvips.info, Node: Virtual fonts, Next: Encodings, Prev: Glyph files, U
A "virtual font" is constructed by extracting characters from one or
more existing fonts and rearranging them, or synthesizing new characters
in various ways. The explanation in this manual is intended to suffice
-for understanding enough about virtual fonts to use them with Dvips. It
+for understanding enough about virtual fonts to use them with Dvips. It
isn't a reference manual on virtual fonts. For more information: The
-primary document on virtual fonts is Donald E. Knuth, `TUGboat' 11(1),
+primary document on virtual fonts is Donald E. Knuth, 'TUGboat' 11(1),
Apr. 1990, pp. 13-23, "Virtual Fonts: More Fun for Grand Wizards"
-(`CTAN:/info/virtual-fonts.knuth'; for CTAN info, *note unixtex.ftp:
-(kpathsea)unixtex.ftp.). (Don't be intimidated by the subtitle.)
+('CTAN:/info/virtual-fonts.knuth'; for CTAN info, *note
+(kpathsea)unixtex.ftp::). (Don't be intimidated by the subtitle.)
- A virtual font (`.vf') file specifies, for each character in the
+ A virtual font ('.vf') file specifies, for each character in the
virtual font, a recipe for typesetting that character. A VF file, like
-a TFM file, is in a compressed binary format. The `vftovp' and
-`vptovf' programs convert a VF file to a human-readable VPL (virtual
-property list) format and back again. *Note vftovp invocation:
-(web2c)vftovp invocation, and *note vptovf invocation: (web2c)vptovf
-invocation.
+a TFM file, is in a compressed binary format. The 'vftovp' and 'vptovf'
+programs convert a VF file to a human-readable VPL (virtual property
+list) format and back again. *Note (web2c)vftovp invocation::, and
+*note (web2c)vptovf invocation::.
In the case of a PostScript font F being used in a straightforward
way, the recipe says: character I in the VF font is character J in font
@@ -2713,11 +2637,11 @@ expects to find them. *Note Encodings::.
Since TeX reads only TFM files, not VF's, each VF must have a
corresponding TFM for use with TeX. This corresponding TFM is created
-when you run `vptovf'.
+when you run 'vptovf'.
You can "expand" virtual fonts into their base fonts with DVIcopy
-(*note dvicopy invocation: (web2c)dvicopy invocation.). This is useful
-if you are using a DVI translator that doesn't understand vf's itself.
+(*note (web2c)dvicopy invocation::). This is useful if you are using a
+DVI translator that doesn't understand vf's itself.

File: dvips.info, Node: Encodings, Next: PostScript typesetting, Prev: Virtual fonts, Up: Font concepts
@@ -2728,41 +2652,41 @@ File: dvips.info, Node: Encodings, Next: PostScript typesetting, Prev: Virtua
Every font, whatever its type, has an "encoding", that specifies the
correspondence between "logical" characters and character codes. For
example, the ASCII encoding specifies that the character numbered 65
-(decimal) is an uppercase `A'. The encoding does not specify what the
+(decimal) is an uppercase 'A'. The encoding does not specify what the
character at that position looks like; there are lots of ways to draw an
-`A', and a glyph file (*note Glyph files::) tells how. Nor does it
+'A', and a glyph file (*note Glyph files::) tells how. Nor does it
specify how much space that character occupies; that information is in a
metric file (*note Metric files::).
TeX implicitly assumes a particular encoding for the fonts you use
-with it. For example, the plain TeX macro `\'', which typesets an
-acute accent over the following letter, assumes the acute accent is at
-position 19 (decimal). This happens to be true of standard TeX fonts
+with it. For example, the plain TeX macro '\'', which typesets an acute
+accent over the following letter, assumes the acute accent is at
+position 19 (decimal). This happens to be true of standard TeX fonts
such as Computer Modern, as you might expect, but it is not true of
normal PostScript fonts.
It's possible but painful to change all the macros that assume
particular character positions. A better solution is to create a new
-font with the information for the acute accent at position 19, where
-TeX expects it to be. *Note Making a font available::.
+font with the information for the acute accent at position 19, where TeX
+expects it to be. *Note Making a font available::.
PostScript represents encodings as a sequence of 256 character names
-called an "encoding vector". An "encoding file" (`.enc') gives such a
+called an "encoding vector". An "encoding file" ('.enc') gives such a
vector, together with ligature and kerning information (with which we
are not concerned at the moment). These encoding files are used by the
Afm2tfm program. Encoding files are also downloaded to the PostScript
interpreter in your printer if you use one of them in place of the
default encoding vector for a particular PostScript font.
- Examples of encodings: the `dvips.enc' encoding file that comes with
-the Fontname distribution (`http://tug.org/fontname') is a good (but
-not perfect) approximation to the TeX encoding for TeX's Computer
-Modern text fonts. This is the encoding of the fonts that originated
-with Dvips, such as `ptmr.tfm'. The distribution includes many other
-encoding files; for example, `8r.enc', which is the base font for the
-current PostScript font distribution, and three corresponding to the
-TeX mathematics fonts: `texmext.enc' for math extensions,
-`texmital.enc' for math italics, and `texmsym.enc' for math symbols.
+ Examples of encodings: the 'dvips.enc' encoding file that comes with
+the Fontname distribution (<http://tug.org/fontname>) is a good (but not
+perfect) approximation to the TeX encoding for TeX's Computer Modern
+text fonts. This is the encoding of the fonts that originated with
+Dvips, such as 'ptmr.tfm'. The distribution includes many other
+encoding files; for example, '8r.enc', which is the base font for the
+current PostScript font distribution, and three corresponding to the TeX
+mathematics fonts: 'texmext.enc' for math extensions, 'texmital.enc' for
+math italics, and 'texmsym.enc' for math symbols.

File: dvips.info, Node: PostScript typesetting, Prev: Encodings, Up: Font concepts
@@ -2778,7 +2702,7 @@ instructions in this typesetting program.
The program must include the definition of any PostScript fonts that
you use in your document. Fonts built into your printer (probably the
-standard 35: `Times-Roman', `ZapfDingbats', ...) are defined within the
+standard 35: 'Times-Roman', 'ZapfDingbats', ...) are defined within the
interpreter itself. Other fonts must be downloaded as pfa or pfb files
(*note Glyph files::) from your host (the computer on which you're
running Dvips).
@@ -2787,46 +2711,45 @@ running Dvips).
what character to typeset, with this mass of metrics, glyphs, encodings,
and other information. (If you're not wondering, skip this section ...)
- The basic PostScript operator for imaging characters is `show'.
-Suppose you've asked TeX to typeset an `S'. This will eventually wind
-up in the Dvips output as the equivalent of this PostScript operation:
+ The basic PostScript operator for imaging characters is 'show'.
+Suppose you've asked TeX to typeset an 'S'. This will eventually wind up
+in the Dvips output as the equivalent of this PostScript operation:
(S) show
-Here is how PostScript typesets the `S':
+Here is how PostScript typesets the 'S':
- 1. PostScript interpreters use ASCII; therefore `S' is represented as
- the integer 83. (Any of the 256 possible characters representable
+ 1. PostScript interpreters use ASCII; therefore 'S' is represented as
+ the integer 83. (Any of the 256 possible characters representable
in a standard 8-bit byte can be typeset.)
2. A PostScript "dictionary" is a mapping of names to arbitrary
- values. A font, to the interpreter, is a dictionary which
- contains entries for certain names. (If these entries are
- missing, the interpreter refuses to do anything with that font.)
+ values. A font, to the interpreter, is a dictionary which contains
+ entries for certain names. (If these entries are missing, the
+ interpreter refuses to do anything with that font.)
PostScript has a notion of "the current font"--whatever font is
currently being typeset in.
- 3. One of the mandatory entries in a font dictionary is `Encoding',
+ 3. One of the mandatory entries in a font dictionary is 'Encoding',
which defines the encoding vector (*note Encodings::) for that
font. This vector of 256 names maps each possible input character
to a name.
4. The interpreter retrieves the entry at position 83 of the encoding
- vector. This value is a PostScript name: `/S'.
+ vector. This value is a PostScript name: '/S'.
5. For Type 1 fonts (we're not going to discuss anything else), the
- interpreter now looks up `/S' as a key in a dictionary named
- `CharStrings', another mandatory entry in a font dictionary.
+ interpreter now looks up '/S' as a key in a dictionary named
+ 'CharStrings', another mandatory entry in a font dictionary.
- 6. The value of `S' in `CharStrings' is the equivalent of a series of
- standard PostScript commands like `curveto', `lineto', `fill', and
- so on. These commands are executed to draw the character. There
+ 6. The value of 'S' in 'CharStrings' is the equivalent of a series of
+ standard PostScript commands like 'curveto', 'lineto', 'fill', and
+ so on. These commands are executed to draw the character. There
can also be "hint information" that helps adapt the character to
low-resolution rasters. (*Note Glyph files::.) The commands are
- actually represented in a more compact way than standard
- PostScript source; see the Type 1 book for details.
-
+ actually represented in a more compact way than standard PostScript
+ source; see the Type 1 book for details.
This method for typesetting characters is used in both Level 1 and
Level 2 PostScript. See the PostScript reference manuals for more
@@ -2842,10 +2765,10 @@ To make a PostScript font available in a TeX document, you need to
install the font on your system and then define it within the document.
Once you have installed the font, of course, it is available for any
document thereafter and you don't need to reinstall it. You must have
-an AFM file for any font you install. Unless the font is built into your
-printer, you must also have a PFA or PFB file.
+an AFM file for any font you install. Unless the font is built into
+your printer, you must also have a PFA or PFB file.
- In the following examples, we use the font `Times-Roman' to
+ In the following examples, we use the font 'Times-Roman' to
illustrate the process. But you should use the prebuilt fonts for Times
and the other standard fonts, rather than rebuilding them. The prebuilt
fonts are made using a more complicated process than that described
@@ -2857,15 +2780,15 @@ the prebuilt fonts.
Installation of a PostScript font proceeds in three steps. *Note
Font concepts::, for descriptions of the various files involved.
- 1. Run `afm2tfm' to create a TFM file for the original font, and the
+ 1. Run 'afm2tfm' to create a TFM file for the original font, and the
VPL form of the virtual font:
afm2tfm Times-Roman -v ptmr rptmr
- 2. Run `vptovf' to generate a VF and TFM file for the virtual font
+ 2. Run 'vptovf' to generate a VF and TFM file for the virtual font
from the VPL file:
vptovf ptmr.vpl ptmr.vf ptmr.tfm
- 3. Insert an entry for the font in `psfonts.map' (*note
+ 3. Insert an entry for the font in 'psfonts.map' (*note
psfonts.map::):
rptmr Times-Roman <ptmr8a.pfa
@@ -2880,58 +2803,58 @@ something like this:
afm2tfm Times-Roman -v ptmr rptmr
-This reads the file `Times-Roman.afm', and produces two files as
-output, namely the virtual property list'file `ptmr.vpl', and the "raw"
-font metric file `rptmr.tfm'. To use the font in TeX, you first run
+This reads the file 'Times-Roman.afm', and produces two files as output,
+namely the virtual property list'file 'ptmr.vpl', and the "raw" font
+metric file 'rptmr.tfm'. To use the font in TeX, you first run
vptovf ptmr.vpl ptmr.vf ptmr.tfm
-You should then install the virtual font file `ptmr.vf' where Dvips
-will see it and install `ptmr.tfm' and `rptmr.tfm' where TeX and Dvips
-will see them.
+You should then install the virtual font file 'ptmr.vf' where Dvips will
+see it and install 'ptmr.tfm' and 'rptmr.tfm' where TeX and Dvips will
+see them.
Using these raw fonts is not recommended; there are no raw fonts in
the prebuilt PostScript fonts distributed along with Dvips. But
nevertheless, that's how Afm2tfm presently operates, so that's what we
-document here. The `r' prefix convention is likewise historical
+document here. The 'r' prefix convention is likewise historical
accident.
- You can also make more complex virtual fonts by editing `ptmr.vpl'
-before running `vptovf'; such editing might add the uppercase Greek
+ You can also make more complex virtual fonts by editing 'ptmr.vpl'
+before running 'vptovf'; such editing might add the uppercase Greek
characters in the standard TeX positions, for instance. (This has
already been done for the prebuilt fonts.)
- Once the files have been installed, you're all set. You can now do
+ Once the files have been installed, you're all set. You can now do
things like this in TeX:
\font\myfont = ptmr at 12pt
\myfont Hello, I am being typeset in 12-point Times-Roman.
- Thus, we have two fonts, one actual (`rptmr', which is analogous to
-the font in the printer) and one virtual (`ptmr', which has been
+ Thus, we have two fonts, one actual ('rptmr', which is analogous to
+the font in the printer) and one virtual ('ptmr', which has been
remapped to the standard TeX encoding (almost)), and has typesetting
-know-how added. You could also say
+know-how added. You could also say
\font\raw = rptmr at 10pt
and typeset directly with that, but then you would have no ligatures or
kerning, and you would have to use Adobe character positions for special
-letters like the ligature `AE'. The virtual font `ptmr' not only has
+letters like the ligature 'AE'. The virtual font 'ptmr' not only has
ligatures and kerning, and most of the standard accent conventions of
TeX, it also has a few additional features not present in the Computer
-Modern fonts. For example, it includes all the Adobe characters (such
+Modern fonts. For example, it includes all the Adobe characters (such
as the Polish ogonek and the French guillemots). The only things you
-lose from ordinary TeX text fonts are the dotless `j' (which can be
+lose from ordinary TeX text fonts are the dotless 'j' (which can be
hacked into the VPL file with literal PostScript specials if you have
-the patience) and uppercase Greek letters (which just don't exist
-unless you buy them separately). *Note Reencoding with Afm2tfm::.
+the patience) and uppercase Greek letters (which just don't exist unless
+you buy them separately). *Note Reencoding with Afm2tfm::.
As a final step you need to record information about both the virtual
font and the original font (if you ever might want to use it) in the
-`psfonts.map' file (*note psfonts.map::). For our example, you'd
-insert the following into `psfonts.map':
+'psfonts.map' file (*note psfonts.map::). For our example, you'd insert
+the following into 'psfonts.map':
rptmr Times-Roman <ptmr8a.pfa
-Of course, `Times-Roman' is already built in to most every printer, so
+Of course, 'Times-Roman' is already built in to most every printer, so
there's no need to download any Type 1 file for it. But if you are
actually following these instructions for new fonts, most likely they
are not built in to the printer.
@@ -2939,7 +2862,7 @@ are not built in to the printer.
These PostScript fonts can be scaled to any size. Go wild! Using
PostScript fonts, however, does use up a great deal of the printer's
memory and it does take time. You may find downloading bitmap fonts
-(possibly compressed, with the `Z' option) to be faster than using the
+(possibly compressed, with the 'Z' option) to be faster than using the
built-in PostScript fonts.

@@ -2956,9 +2879,9 @@ especially by the reencodings you can specify with those options. You
can also obtain special effects such as an oblique font.
An alternative to Afm2tfm for creating virtual fonts is Alan
-Jeffrey's `fontinst' program, available from
-`CTAN:fonts/utilities/fontinst' (for CTAN info, *note unixtex.ftp:
-(kpathsea)unixtex.ftp.).
+Jeffrey's 'fontinst' program, available from
+'CTAN:fonts/utilities/fontinst' (for CTAN info, *note
+(kpathsea)unixtex.ftp::).
* Menu:
@@ -2973,9 +2896,9 @@ File: dvips.info, Node: Changing font encodings, Next: Special font effects,
-----------------------------
Afm2tfm allows you to specify a different encoding for a PostScript font
-(for a general introduction to encodings, *note Encodings::). The `-t'
-option changes the TeX encoding, `-p' changes the PostScript encoding,
-and `-T' changes both simultaneously, as detailed in the sections below.
+(for a general introduction to encodings, *note Encodings::). The '-t'
+option changes the TeX encoding, '-p' changes the PostScript encoding,
+and '-T' changes both simultaneously, as detailed in the sections below.
* Menu:
@@ -2988,12 +2911,12 @@ and `-T' changes both simultaneously, as detailed in the sections below.

File: dvips.info, Node: Changing TeX encodings, Next: Changing PostScript encodings, Up: Changing font encodings
-6.3.1.1 `-t': Changing TeX encodings
+6.3.1.1 '-t': Changing TeX encodings
....................................
-To build a virtual font with Afm2tfm, you specify the `-v' or `-V'
-option. You can then specify an encoding for that virtual font with `-t
-TEX-ENC'. (`-t' is ignored if neither `-v' nor `-V' is present.) Any
+To build a virtual font with Afm2tfm, you specify the '-v' or '-V'
+option. You can then specify an encoding for that virtual font with '-t
+TEX-ENC'. ('-t' is ignored if neither '-v' nor '-V' is present.) Any
ligature and kerning information you specify in TEX-ENC will be used in
the VPL, in addition to the ligature and kerning information from the
AFM file.
@@ -3001,48 +2924,48 @@ AFM file.
If the AFM file has no entry for a character specified in TEX-ENC,
that character will be omitted from the output VPL.
- The `-t' option is likely to be needed when you have a PostScript
+ The '-t' option is likely to be needed when you have a PostScript
font corresponding to a TeX font other than a normal text font such as
Computer Modern. For instance, if you have a PostScript font that
contains math symbols, you'd probably want to use the encoding in the
-`texmsym.enc' file supplied with Dvips. (For a start; to actually get
+'texmsym.enc' file supplied with Dvips. (For a start; to actually get
usable math fonts, you have to define much more than just an encoding.)

File: dvips.info, Node: Changing PostScript encodings, Next: Changing both encodings, Prev: Changing TeX encodings, Up: Changing font encodings
-6.3.1.2 `-p': Changing PostScript encodings
+6.3.1.2 '-p': Changing PostScript encodings
...........................................
By default, Afm2tfm uses the encoding it finds in the AFM file. You can
-specify a different PostScript encoding with `-p PS-ENC'. This makes
-the raw TFM file (the one output by Afm2tfm) have the encoding
-specified in the encoding file PS-ENC. Any ligature or kern
-information specified in PS-ENC is ignored by Afm2tfm, since ligkern
-info is always omitted from the raw TFM.
+specify a different PostScript encoding with '-p PS-ENC'. This makes
+the raw TFM file (the one output by Afm2tfm) have the encoding specified
+in the encoding file PS-ENC. Any ligature or kern information specified
+in PS-ENC is ignored by Afm2tfm, since ligkern info is always omitted
+from the raw TFM.
If you use this option, you must also arrange to download PS-ENC as
part of any document that uses this font. You do this by adding a line
-like the following one to `psfonts.map' (*note psfonts.map::):
+like the following one to 'psfonts.map' (*note psfonts.map::):
zpopr Optima "MyEncoding ReEncodeFont" <myenc.enc
- Using `-p' is the only way to access characters in a PostScript font
+ Using '-p' is the only way to access characters in a PostScript font
that are neither encoded in the AFM file nor constructed from other
-characters. For instance, Adobe's `Times-Roman' font contains the
-extra characters `trademark' and `registered' (among others); these can
-only be accessed through such a PostScript reencoding.
+characters. For instance, Adobe's 'Times-Roman' font contains the extra
+characters 'trademark' and 'registered' (among others); these can only
+be accessed through such a PostScript reencoding.
- The `8r' base encoding used for the current PostScript font
+ The '8r' base encoding used for the current PostScript font
distribution does do this reencoding, for precisely this reason.

File: dvips.info, Node: Changing both encodings, Next: Reencoding with Afm2tfm, Prev: Changing PostScript encodings, Up: Changing font encodings
-6.3.1.3 `-T': Changing both TeX and PostScript encodings
+6.3.1.3 '-T': Changing both TeX and PostScript encodings
........................................................
-The option `-T ENC-FILE' is equivalent to `-p ENC-FILE -t ENC-FILE'.
-If you make regular use of a private non-standard reencoding `-T' is
+The option '-T ENC-FILE' is equivalent to '-p ENC-FILE -t ENC-FILE'. If
+you make regular use of a private non-standard reencoding '-T' is
usually a better idea than the individual options, to avoid unexpected
inconsistencies in mapping otherwise. An example of when you might use
this option is a dingbats font: when you have a TeX encoding that is
@@ -3060,37 +2983,36 @@ Afm2tfm generates these files from two encodings: one for TeX and one
for PostScript. The TeX encoding is used to map character numbers to
character names while the PostScript encoding is used to map each
character name to a possibly different number. In combination, you can
-get access to any character of a PostScript font at any position for
-TeX typesetting.
+get access to any character of a PostScript font at any position for TeX
+typesetting.
- In the default case, when you specify none of the `-t', `-p', or
-`-T' options, Afm2tfm uses a default TeX encoding (which mostly
-corresponds to the Computer Modern text fonts) and the PostScript
-encoding found in the AFM file being read. The reencoding is also
-sometimes called a "remapping".
+ In the default case, when you specify none of the '-t', '-p', or '-T'
+options, Afm2tfm uses a default TeX encoding (which mostly corresponds
+to the Computer Modern text fonts) and the PostScript encoding found in
+the AFM file being read. The reencoding is also sometimes called a
+"remapping".
For example, the default encodings reencode the acute accent in two
steps: first the default TeX encoding maps the number 19 to the
-character name `acute'; then the default PostScript encoding, as found
-in the AFM file for an ordinary PostScript font, maps the character
-name `acute' to the number 194. (The PostScript encoding works in
-reverse, by looking in the encoding vector for the name and then
-yielding the corresponding number.) The combined mapping of 19 to 194
-shows up explicitly in the VF file and also implicitly in the fact that
-the properties of PostScript character 194 appear in position 19 of the
-TFM file for the virtual font.
-
- The default encoding of the distributed fonts (e.g., `ptmr.tfm')
+character name 'acute'; then the default PostScript encoding, as found
+in the AFM file for an ordinary PostScript font, maps the character name
+'acute' to the number 194. (The PostScript encoding works in reverse,
+by looking in the encoding vector for the name and then yielding the
+corresponding number.) The combined mapping of 19 to 194 shows up
+explicitly in the VF file and also implicitly in the fact that the
+properties of PostScript character 194 appear in position 19 of the TFM
+file for the virtual font.
+
+ The default encoding of the distributed fonts (e.g., 'ptmr.tfm')
mostly follows plain TeX conventions for accents. The exceptions: the
-Hungarian umlaut (which is at position `0x7D' in `cmr10', but position
-`0xCD' in `ptmr'); the dot accent (at positions `0x5F' and `0xC7',
-respectively); and the Scandinavian A ring `\AA', whose definition
-needs different tweaking. In order to use these accents with
-PostScript fonts or in math mode when `\textfont0' is a PostScript
-font, you will need to use the following definitions. These
-definitions will not work with the Computer Modern fonts for the
-relevant accents. They are already part of the distributed
-`psfonts.sty' for use with LaTeX.
+Hungarian umlaut (which is at position '0x7D' in 'cmr10', but position
+'0xCD' in 'ptmr'); the dot accent (at positions '0x5F' and '0xC7',
+respectively); and the Scandinavian A ring '\AA', whose definition needs
+different tweaking. In order to use these accents with PostScript fonts
+or in math mode when '\textfont0' is a PostScript font, you will need to
+use the following definitions. These definitions will not work with the
+Computer Modern fonts for the relevant accents. They are already part
+of the distributed 'psfonts.sty' for use with LaTeX.
\def\H#1{{\accent"CD #1}}
\def\.#1{{\accent"C7 #1}}
@@ -3100,23 +3022,22 @@ relevant accents. They are already part of the distributed
\advance\aadimen-1ex\setbox0\hbox{A}\rlap{\raise.67\aadimen
\hbox to \wd0{\hss\char'27\hss}}A}
- As a kind of summary, here are the `CODINGSCHEME's that result from
+ As a kind of summary, here are the 'CODINGSCHEME's that result from
the various possible choices for reencoding.
default encoding
(CODINGSCHEME TeX text + AdobeStandardEncoding)
-`-p dc.enc'
+'-p dc.enc'
(CODINGSCHEME TeX text + DCEncoding)
-`-t dc.enc'
+'-t dc.enc'
(CODINGSCHEME DCEncoding + AdobeStandardEncoding)
-`-T dc.enc'
+'-T dc.enc'
(CODINGSCHEME DCEncoding + DCEncoding)
-
-The `CODINGSCHEME' line appears in the VPL file but is ignored by Dvips.
+The 'CODINGSCHEME' line appears in the VPL file but is ignored by Dvips.

File: dvips.info, Node: Encoding file format, Prev: Reencoding with Afm2tfm, Up: Changing font encodings
@@ -3128,8 +3049,8 @@ Afm2tfm's encoding files have the same format as an encoding vector in a
PostScript font. Here is a skeletal example:
% Comments are ignored, unless the first word after the percent sign
- % is `LIGKERN'; see below.
- /MyEncoding [ % exactly 256 entries follow, each with a leading `/'
+ % is 'LIGKERN'; see below.
+ /MyEncoding [ % exactly 256 entries follow, each with a leading '/'
/Alpha /Beta /Gamma /Delta ...
/A /B ... /Z
... /.notdef /xfooaccent /yfooaccent /zfooaccent
@@ -3139,53 +3060,53 @@ PostScript font. Here is a skeletal example:
at the PostScript level (see the previous section).
Comments, which start with a percent sign and continue until the end
-of the line, are ignored unless they start with `LIGKERN' (see below).
+of the line, are ignored unless they start with 'LIGKERN' (see below).
The first non-comment word of the file must start with a forward
-slash `/' (i.e., a PostScript literal name) and defines the name of the
-encoding. The next word must be an left bracket `['. Following that
-must be precisely 256 character names; use `/.notdef' for any that you
+slash '/' (i.e., a PostScript literal name) and defines the name of the
+encoding. The next word must be an left bracket '['. Following that
+must be precisely 256 character names; use '/.notdef' for any that you
want to leave undefined. Then there must be a matching right bracket
-`]'. A final `def' token is optional. All names are case-sensitive.
+']'. A final 'def' token is optional. All names are case-sensitive.
Any ligature or kern information is given as a comment. If the first
-word after the `%' is `LIGKERN', then the entire rest of the line is
+word after the '%' is 'LIGKERN', then the entire rest of the line is
parsed for ligature and kern information. This ligature and kern
information is given in groups of words: each group is terminated by a
-space and a semicolon and (unless the semicolon is at the end of a
-line) another space.
+space and a semicolon and (unless the semicolon is at the end of a line)
+another space.
- In these `LIGKERN' statements, three types of information may be
+ In these 'LIGKERN' statements, three types of information may be
specified. These three types are ligature pairs, kerns to ignore, and
the character value of this font's boundary character.
- Throughout a `LIGKERN' statement, the boundary character is
-specified as `||'. To set the font's boundary character value for TeX:
+ Throughout a 'LIGKERN' statement, the boundary character is specified
+as '||'. To set the font's boundary character value for TeX:
% LIGKERN || = 39 ;
To indicate a kern to remove, give the names of the two characters
-(without the leading slash) separated by `{}', as in `one {} one ;'.
-This is intended to be reminiscent of the way you might use `{}' in a
+(without the leading slash) separated by '{}', as in 'one {} one ;'.
+This is intended to be reminiscent of the way you might use '{}' in a
TeX file to turn off ligatures or kerns at a particular location.
-Either or both of the character names can be given as `*', which is a
-wild card matching any character; thus, all kerns can be removed with
-`* {} * ;'.
+Either or both of the character names can be given as '*', which is a
+wild card matching any character; thus, all kerns can be removed with '*
+{} * ;'.
To specify a ligature, specify the names of the pair of characters,
followed by the ligature operation (as in Metafont), followed by the
replacing character name. Either (but not both) of the first two
-characters can be `||' to indicate a word boundary.
+characters can be '||' to indicate a word boundary.
- The most common operation is `=:' meaning that both characters are
-removed and replaced by the third character, but by adding the `|'
-character on either side of the `=:', you can retain either or both of
+ The most common operation is '=:' meaning that both characters are
+removed and replaced by the third character, but by adding the '|'
+character on either side of the '=:', you can retain either or both of
the two leading characters. In addition, by suffixing the ligature
-operation with one or two `>' signs, you can make the ligature scanning
+operation with one or two '>' signs, you can make the ligature scanning
operation skip that many resulting characters before proceeding. This
-works just like in Metafont. For example, the `fi' ligature is
-specified with `f i =: fi ;'. A more convoluted ligature is `one one
-|=:|>> exclam ;' which separates a pair of adjacent `1''s with an
+works just like in Metafont. For example, the 'fi' ligature is
+specified with 'f i =: fi ;'. A more convoluted ligature is 'one one
+|=:|>> exclam ;' which separates a pair of adjacent '1''s with an
exclamation point, and then skips over two of the resulting characters
before continuing searching for ligatures and kerns. You cannot give
more >'s than |'s in an ligature operation, so there are a total of
@@ -3215,38 +3136,38 @@ Besides the reencodings described in the previous section, Afm2tfm can
do other manipulations. (Again, it's best to use the prebuilt fonts
rather than attempting to remake them.)
- `-s SLANT' makes an obliqued variant, as in:
+ '-s SLANT' makes an obliqued variant, as in:
afm2tfm Times-Roman -s .167 -v ptmro rptmro
-This creates `ptmro.vpl' and `rptmro.tfm'. To use this font, put the
+This creates 'ptmro.vpl' and 'rptmro.tfm'. To use this font, put the
line
rptmro Times-Roman ".167 SlantFont"
-into `psfonts.map'. Then `rptmro' (our name for the obliqued Times)
+into 'psfonts.map'. Then 'rptmro' (our name for the obliqued Times)
will act as if it were a resident font, although it is actually
-constructed from Times-Roman via the PostScript routine `SlantFont'
+constructed from Times-Roman via the PostScript routine 'SlantFont'
(which will slant everything 1/6 to the right, in this case).
Similarly, you can get an expanded font with
afm2tfm Times-Roman -e 1.2 -v ptmrre rptmrre
-and by recording the pseudo-resident font
+and by recording the pseudo-resident font
rptmrre Times-Roman "1.2 ExtendFont"
-in `psfonts.map'.
+in 'psfonts.map'.
- You can also create a small caps font with a command such as
+ You can also create a small caps font with a command such as
afm2tfm Times-Roman -V ptmrc rptmrc
This will generate a set of pseudo-small caps mapped into the usual
-lowercase positions and scaled down to 0.8 of the normal cap
-dimensions. You can also specify the scaling as something other than
-the default 0.8:
+lowercase positions and scaled down to 0.8 of the normal cap dimensions.
+You can also specify the scaling as something other than the default
+0.8:
afm2tfm Times-Roman -c 0.7 -V ptmrc rptmrc
@@ -3255,19 +3176,19 @@ caps independently of the rest of the font. If you want a really
professional looking set of small caps, you need to acquire a small caps
font.
- To change the `PaintType' in a font from filled (0) to outlined (2),
-you can add `"/PaintType 2 store"' to `psfonts.map', as in the
+ To change the 'PaintType' in a font from filled (0) to outlined (2),
+you can add '"/PaintType 2 store"' to 'psfonts.map', as in the
following:
rphvrl Helvetica "/PaintType 2 store"
Afm2tfm writes to standard output the line you need to add to
-`psfonts.map' to use that font, assuming the font is resident in the
-printer; if the font is not resident, you must add the `<FILENAME'
+'psfonts.map' to use that font, assuming the font is resident in the
+printer; if the font is not resident, you must add the '<FILENAME'
command to download the font. Each identical line only needs to be
-specified once in the `psfonts.map' file, even though many different
-fonts (small caps variants, or ones with different output encodings)
-may be based on it.
+specified once in the 'psfonts.map' file, even though many different
+fonts (small caps variants, or ones with different output encodings) may
+be based on it.

File: dvips.info, Node: Afm2tfm options, Prev: Special font effects, Up: Invoking afm2tfm
@@ -3280,7 +3201,7 @@ Synopsis:
Afm2tfm reads AFMFILE and writes a corresponding (but raw) TFM file.
If TFMFILE is not supplied, the base name of the AFM file is extended
-with `.tfm' to get the output filename.
+with '.tfm' to get the output filename.
The simplest example:
@@ -3289,83 +3210,83 @@ with `.tfm' to get the output filename.
The TFM file thus created is "raw" because it omits ligature and kern
information, and does no character remapping; it simply contains the
character information in the AFM file in TFM form, which is the form
-that TeX understands. The characters have the same code in the TFM
-file as in the AFM file. For text fonts, this means printable ASCII
+that TeX understands. The characters have the same code in the TFM file
+as in the AFM file. For text fonts, this means printable ASCII
characters will work ok, but little else, because standard PostScript
fonts have a different encoding scheme than the one that plain TeX
expects (*note Encodings::). Although both schemes agree for the
printable ASCII characters, other characters such as ligatures and
accents vary. Thus, in practice, it's almost always desirable to create
-a virtual font as well with the `-v' or `-V' option. *Note Making a
+a virtual font as well with the '-v' or '-V' option. *Note Making a
font available::.
The command line options to Afm2tfm:
-`-c RATIO'
- See `-V'; overrides the default ratio of 0.8 for the scaling of
+'-c RATIO'
+ See '-V'; overrides the default ratio of 0.8 for the scaling of
small caps.
-`-e RATIO'
- Stretch characters horizontally by RATIO; if less than 1.0, you
- get a condensed font.
+'-e RATIO'
+ Stretch characters horizontally by RATIO; if less than 1.0, you get
+ a condensed font.
-`-O'
- Output all character codes in the `vpl' file as octal numbers, not
+'-O'
+ Output all character codes in the 'vpl' file as octal numbers, not
names; this is useful for symbol or other special-purpose fonts
- where character names such as `A' have no meaning.
+ where character names such as 'A' have no meaning.
-`-p PS-ENC'
+'-p PS-ENC'
Use PS-ENC for the destination (PostScript) encoding of the font;
PS-ENC must be mentioned as a header file for the font in
- `psfonts.map'. *Note Changing PostScript encodings::.
+ 'psfonts.map'. *Note Changing PostScript encodings::.
-`-s SLANT'
+'-s SLANT'
Slant characters to the right by SLANT. If SLANT is negative, the
letters slope to the left (or they might be upright if you start
with an italic font).
-`-t TEX-ENC'
+'-t TEX-ENC'
Use TEX-ENC for the target (TeX) encoding of the font. Ligature
and kern information may also be specified in FILE. FILE is not
- mentioned in `psfonts.map'.
+ mentioned in 'psfonts.map'.
-`-T PS-TEX-ENC'
+'-T PS-TEX-ENC'
Use PS-TEX-ENC for both the PostScript and target TeX encodings of
- the font. Equivalent to `-p FILE -t FILE'.
+ the font. Equivalent to '-p FILE -t FILE'.
-`-u'
+'-u'
Use only those characters specified in the TeX encoding, and no
others. By default, Afm2tfm tries to include all characters in the
input font, even those not present in the TeX encoding (it puts
them into otherwise-unused positions, arbitrarily).
-`-v VPL-FILE'
+'-v VPL-FILE'
Output a VPL (virtual property list) file, as well as a TFM file.
-`-V VPL-FILE'
- Same as `-v', but the virtual font generated is a pseudo small caps
+'-V VPL-FILE'
+ Same as '-v', but the virtual font generated is a pseudo small caps
font obtained by scaling uppercase letters by 0.8 to typeset
- lowercase. This font handles accented letters and retains proper
+ lowercase. This font handles accented letters and retains proper
kerning.

File: dvips.info, Node: psfonts.map, Prev: Invoking afm2tfm, Up: PostScript fonts
-6.4 `psfonts.map': PostScript font catalog
+6.4 'psfonts.map': PostScript font catalog
==========================================
-The `psfonts.map' file associates a PostScript font with related files
+The 'psfonts.map' file associates a PostScript font with related files
and constructs. Each line has the format:
FILENAME POSTSCRIPT-NAME OPTIONS
For example, the line
rpstrn StoneInformal <StoneInformal.pfb
- causes Dvips to download `StoneInformal.pfb' (just as if it were a
+causes Dvips to download 'StoneInformal.pfb' (just as if it were a
header file, *note Header files::) if the DVI file (or a virtual font,
-*note Virtual fonts::) references the TFM file `rpstrn'. The
-PostScript `/FontName' of the font defined inside the `pfb' file should
-be `StoneInformal'.
+*note Virtual fonts::) references the TFM file 'rpstrn'. The PostScript
+'/FontName' of the font defined inside the 'pfb' file should be
+'StoneInformal'.
You can generate transformed fonts with a line like this:
rpstrc StoneInformal <StoneInformal.pfb ".8 ExtendFont"
@@ -3373,29 +3294,29 @@ be `StoneInformal'.
*Note Special font effects::, for a complete list of font effects.
You can change the encoding of the Type 1 font at the PostScript
-level with a `ReEncodeFont' instruction, plus the name of the encoding
+level with a 'ReEncodeFont' instruction, plus the name of the encoding
file. This allows you access to characters that may be present in the
Type 1 font file, but not encoded by default--most of the preaccented
characters, for example. An example:
pstrn8r StoneInformal "TeXBase1Encoding ReEncodeFont" <8r.enc <pstrn8a.pfb
- The `8r' encoding mentioned here has been designed to serve as a
-base for all downloadable fonts; it allows access to all the characters
-commonly present in a Type 1 font. For more details, see the `8r.enc'
+ The '8r' encoding mentioned here has been designed to serve as a base
+for all downloadable fonts; it allows access to all the characters
+commonly present in a Type 1 font. For more details, see the '8r.enc'
source file that comes with (and is installed with) Dvips.
You may notice that the same syntax is used for downloading encoding
-vectors and Type 1 font files. To make your intentions clear, you can
-also use `<[' to explicitly indicate you are downloading an encoding
+vectors and Type 1 font files. To make your intentions clear, you can
+also use '<[' to explicitly indicate you are downloading an encoding
vector, as in:
pstrn8r StoneInformal "TeXBase1Encoding ReEncodeFont" <[8r.enc <pstrn8a.pfb
- If the filename of your encoding vector does not end in `.enc', and
-you are using partial font downloading, you must use the `<[' syntax,
-or Dvips will not download the font properly.
+ If the filename of your encoding vector does not end in '.enc', and
+you are using partial font downloading, you must use the '<[' syntax, or
+Dvips will not download the font properly.
Similarly, the name of the Type 1 font file itself must have
-extension `.pfa' or `.pfb' for partial downloading to work properly.
+extension '.pfa' or '.pfb' for partial downloading to work properly.
When using PFB files, Dvips is smart enough to unpack the binary PFB
format into printable ASCII so there is no need to perform this
@@ -3403,17 +3324,17 @@ conversion yourself. In addition, Dvips scans the font to determine its
memory usage, just as it does for other header files (*note Header
files::).
- If the `j' config file or command-line option is enabled (as it is
-by default), `StoneInformal.pfb' will be "partially downloaded"--only
-those characters your document actually uses will be extracted and
-downloaded, and the remainder discarded. *Note Option details::.
+ If the 'j' config file or command-line option is enabled (as it is by
+default), 'StoneInformal.pfb' will be "partially downloaded"--only those
+characters your document actually uses will be extracted and downloaded,
+and the remainder discarded. *Note Option details::.
Adobe Multiple Master fonts, such as Minion, cannot be partially
downloaded. To partially download in general, but avoid partial
-downloading for individual fonts, use `<<' instead `<':
+downloading for individual fonts, use '<<' instead '<':
pmnr8r Minion <<Minion.pfb
- Here is a brief summary of how `psfonts.map' is read:
+ Here is a brief summary of how 'psfonts.map' is read:
1. If a line is empty or begins with a space, percent, asterisk,
semicolon, or hash mark, it is ignored.
@@ -3423,34 +3344,33 @@ downloading for individual fonts, use `<<' instead `<':
double quote, it extends until the next double quote or the end of
the line.
- 3. If a word starts with `<<', it is taken as a font file to be
- wholly downloaded. Use this to avoid partial downloading, as
- described above.
+ 3. If a word starts with '<<', it is taken as a font file to be wholly
+ downloaded. Use this to avoid partial downloading, as described
+ above.
- 4. If a word starts with `<[', it is taken as an encoding file to be
+ 4. If a word starts with '<[', it is taken as an encoding file to be
downloaded. Use this if the name of the encoding file does end in
- `.enc', also as described above.
+ '.enc', also as described above.
- 5. If a word starts with a `<' character, it is treated as a header
- file that needs to be downloaded. If the name ends in `.pfa' or
- `.pfb', it is taken as Type 1 font file that will be partially
- downloaded if the `j' option is in effect. There can be more than
- one such header for a given font. If a `<' is a word by itself,
+ 5. If a word starts with a '<' character, it is treated as a header
+ file that needs to be downloaded. If the name ends in '.pfa' or
+ '.pfb', it is taken as Type 1 font file that will be partially
+ downloaded if the 'j' option is in effect. There can be more than
+ one such header for a given font. If a '<' is a word by itself,
the next word is taken as the name of the header file.
- 6. If a word starts with a `"' character, it is taken as PostScript
+ 6. If a word starts with a '"' character, it is taken as PostScript
code used in generating that font, and is inserted into the output
verbatim at the appropriate point. (And the double quotes
beginning and ending the word are removed.)
- 7. Otherwise the word is a name. The first such name is the TFM file,
+ 7. Otherwise the word is a name. The first such name is the TFM file,
that either a DVI file or a virtual font file can refer to. If
there is a second name, it is used as the PostScript name and
should match what is defined in the downloaded file; if there is
only one name, it is used for both the TeX name and the PostScript
name.
-

File: dvips.info, Node: Color, Next: Index, Prev: PostScript fonts, Up: Top
@@ -3461,8 +3381,8 @@ Dvips supports one-pass multi-color printing of TeX documents on any
color PostScript device. Initially added by Jim Hafner, IBM Research,
<hafner@almaden.ibm.com>, the color support has gone through many
changes by Tomas Rokicki. Besides the source code support itself, there
-are additional TeX macro files: `colordvi.tex' and `blackdvi.tex', and
-corresponding `.sty' versions for use with LaTeX.
+are additional TeX macro files: 'colordvi.tex' and 'blackdvi.tex', and
+corresponding '.sty' versions for use with LaTeX.
In this section we describe the use of color from the document
preparer's point of view and then add some instructions on installation
@@ -3483,15 +3403,15 @@ File: dvips.info, Node: Color macro files, Next: User-definable colors, Up: C
7.1 Color macro files
=====================
-All the color macro commands are defined in `colordvi.tex' (or
-`colordvi.sty'). To access these macros simply add to the top of your
+All the color macro commands are defined in 'colordvi.tex' (or
+'colordvi.sty'). To access these macros simply add to the top of your
plain TeX file the command:
\input colordvi
- For (the obsolete) LaTeX 2.09, add the `colordvi' style option as in:
+For (the obsolete) LaTeX 2.09, add the 'colordvi' style option as in:
\documentstyle[12pt,colordvi]{article}
- For LaTeX 2e, these examples are not applicable. Instead, please see
+For LaTeX 2e, these examples are not applicable. Instead, please see
the documentation for the graphics package, available from
-`CTAN:doc/latex/graphics/'. See also `CTAN:doc/epslatex.ps'.
+'CTAN:doc/latex/graphics/'. See also 'CTAN:doc/epslatex.ps'.
These macros provide two basic kinds of color macros: ones for local
color changes (a few words, a single symbol) and one for global color
@@ -3499,16 +3419,15 @@ changes (the whole document). All the color names use a mixed case
scheme to avoid conflicts with other macros. There are 68 predefined
colors, with names taken primarily from the Crayola crayon box of 64
colors, and one pair of macros for the user to set his own color pattern
-(*note User-definable colors::). You can browse the file
-`colordvi.tex' for a list of the predefined colors. The comments in
-this file also show a rough correspondence between the crayon names and
-Pantones.
+(*note User-definable colors::). You can browse the file 'colordvi.tex'
+for a list of the predefined colors. The comments in this file also
+show a rough correspondence between the crayon names and Pantones.
A local color command has the form
\COLORNAME{this is the color COLORNAME}
-where COLORNAME is the name of a predefined color, e.g., `Blue'. As
+where COLORNAME is the name of a predefined color, e.g., 'Blue'. As
shown, these macros take one argument, the text to print in the
specified color. This can be used for nested color changes since it
restores the original color state when it completes. For example:
@@ -3525,7 +3444,7 @@ nest too deeply lest you and the reader lose track of the color history.
These macros take no arguments and changes the default color from that
point on to COLORNAME. This of course can be overridden globally by
-another such command or locally by local color commands. For example,
+another such command or locally by local color commands. For example,
expanding on the example above, we might have
\textGreen
@@ -3539,12 +3458,12 @@ expanding on the example above, we might have
The color commands will even work in math mode and across math mode
boundaries. This means that if you have a color before going into math
mode, the mathematics will be set in that color as well. In alignment
-environments like `\halign', `tabular' or `eqnarray', local color
+environments like '\halign', 'tabular' or 'eqnarray', local color
commands cannot extend beyond the alignment characters.
Because local color commands respect only some environment and
-delimiter changes besides their own, care must be taken in setting
-their scope. It is best not to have them stretch too far.
+delimiter changes besides their own, care must be taken in setting their
+scope. It is best not to have them stretch too far.
At the present time there are no macros for color environments in
LaTeX which might have a larger range. This is primarily to keep the
@@ -3557,7 +3476,7 @@ File: dvips.info, Node: User-definable colors, Next: Color subtleties, Prev:
=========================
There are two ways for the user to specify colors not already defined.
-For local changes, there is the command `\Color' which takes two
+For local changes, there is the command '\Color' which takes two
arguments. The first argument is four numbers between zero and one and
specifies the intensity of cyan, magenta, yellow and black (CMYK) in
that order. The second argument is the text that should appear in the
@@ -3567,10 +3486,9 @@ and 20% black. You would use the command
\Color{.5 .85 .4 .2}{this color is pretty}
- For global color changes, there is a command `\textColor' which
-takes one argument, the CMYK quadruple of relative color intensities.
-For example, if you want the default color to be as above, then the
-command
+ For global color changes, there is a command '\textColor' which takes
+one argument, the CMYK quadruple of relative color intensities. For
+example, if you want the default color to be as above, then the command
\textColor{.5 .85 .4 .2}
The text from now on will be this pretty color
@@ -3587,11 +3505,11 @@ File: dvips.info, Node: Color subtleties, Next: Ted Turner, Prev: User-defina
7.3 Color subtleties
====================
-Color macros are defined via `\special' keywords. As such, they are
-put in the `.dvi' file only as explicit message strings to the driver.
-The (unpleasant) result is that certain unprotected regions of the text
-can have unwanted color side effects. For example, if a color region
-is split by TeX across a page boundary, then the footers of the current
+Color macros are defined via '\special' keywords. As such, they are put
+in the '.dvi' file only as explicit message strings to the driver. The
+(unpleasant) result is that certain unprotected regions of the text can
+have unwanted color side effects. For example, if a color region is
+split by TeX across a page boundary, then the footers of the current
page (e.g., the page number) and the headers of the next page can
inherit that color. To avoid this effect globally, users should make
sure that these special regions of the text are defined with their own
@@ -3610,12 +3528,12 @@ unfortunate but inevitable, because TeX and LaTeX were not written with
color in mind.
Even when writing your own macros, much care must be taken. The
-macros that `colorize' a portion of the text work prefix the text work
-by outputting one `\special' command to turn the color on before the
-text, and outputting another `\special' command afterwards to restore
+macros that 'colorize' a portion of the text work prefix the text work
+by outputting one '\special' command to turn the color on before the
+text, and outputting another '\special' command afterwards to restore
the original color. It is often useful to ensure that TeX is in
horizontal mode before the first special command is issued; this can be
-done by prefixing the color command with `\leavevmode'.
+done by prefixing the color command with '\leavevmode'.

File: dvips.info, Node: Ted Turner, Next: Color device configuration, Prev: Color subtleties, Up: Color
@@ -3628,16 +3546,16 @@ want to print it in black and white there are two options. On all
(good) PostScript devices, printing a color file will print in
corresponding gray levels. This is useful to get a rough idea of the
colors without using expensive color printing devices. The second
-option is to replace the call to input `colordvi.tex' with
-`blackdvi.tex' (and similarly for the `.sty' files). So in the above
-example, replacing the word `colordvi' with `blackdvi' suffices.
-`blackdvi.tex' defines the color macros as no-ops, and so will produce
+option is to replace the call to input 'colordvi.tex' with
+'blackdvi.tex' (and similarly for the '.sty' files). So in the above
+example, replacing the word 'colordvi' with 'blackdvi' suffices.
+'blackdvi.tex' defines the color macros as no-ops, and so will produce
normal black/white printing. By this simple mechanism, the user can
switch to all black/white printing without having to ferret out the
color commands. Also, some device drivers, particularly non-PostScript
ones like screen previewers, will simply ignore the color commands and
-so print in black/white. Hopefully, in the future screen previewers
-for color displays will be compatible with some form of color support.
+so print in black/white. Hopefully, in the future screen previewers for
+color displays will be compatible with some form of color support.

File: dvips.info, Node: Color device configuration, Next: Color support details, Prev: Ted Turner, Up: Color
@@ -3648,47 +3566,47 @@ File: dvips.info, Node: Color device configuration, Next: Color support detail
To configure Dvips for a particular color device you need to fine tune
the color parameters to match your device's color rendition. To do
this, you will need a Pantone chart for your device. The header file
-`color.lpro' shows a (rough) correspondence between the Crayola crayon
+'color.lpro' shows a (rough) correspondence between the Crayola crayon
names and the Pantone numbers and also defines default CMYK values for
each of the colors. Note that these colors must be defined in CMYK
terms and not RGB, as Dvips outputs PostScript color commands in CMYK.
-This header file also defines (if they are not known to the
-interpreter) the PostScript commands `setcmykcolor' and
-`currentcmykcolor' in terms of a RGB equivalent so if your device only
-understands RGB, there should be no problem.
+This header file also defines (if they are not known to the interpreter)
+the PostScript commands 'setcmykcolor' and 'currentcmykcolor' in terms
+of a RGB equivalent so if your device only understands RGB, there should
+be no problem.
The parameters set in this file were determined by comparing the
Pantone chart of a Tektronix Phaser printer with the actual Crayola
-Crayons. Because these were defined for a particular device, the
-actual color rendition on your device may be very different. There are
-two ways to adjust this. One is to use the PAntone chart for your
-device to rewrite `color.lpro' prior to compilation and installation.
-A better alternative, which supports multiple devices, is to add a
-header file option in the configuration file (*note Configuration file
-commands::) for each device that defines, in `userdict', the color
-parameters for those colors that need redefining.
+Crayons. Because these were defined for a particular device, the actual
+color rendition on your device may be very different. There are two
+ways to adjust this. One is to use the PAntone chart for your device to
+rewrite 'color.lpro' prior to compilation and installation. A better
+alternative, which supports multiple devices, is to add a header file
+option in the configuration file (*note Configuration file commands::)
+for each device that defines, in 'userdict', the color parameters for
+those colors that need redefining.
For example, if you need to change the parameters defining
-`Goldenrod' (approximately Pantone 109 on the Phaser) for your device
-`mycolordev', do the following. In the Pantone chart for your device,
-find the CMYK values for Pantone 109. Let's say they are `{\ 0 0.10
-0.75 0.03 }'. Then create a header file named `mycolordev.pro' with the
+'Goldenrod' (approximately Pantone 109 on the Phaser) for your device
+'mycolordev', do the following. In the Pantone chart for your device,
+find the CMYK values for Pantone 109. Let's say they are '{\ 0 0.10
+0.75 0.03 }'. Then create a header file named 'mycolordev.pro' with the
commands
userdict begin
/Goldenrod { 0 0.10 0.75 0.03 setcmykcolor} bind def
-Finally, in `config.mycolordev' add the line
+Finally, in 'config.mycolordev' add the line
h mycolordev.pro
-This will then define `Goldenrod' in your device's CMYK values in
-`userdict' which is checked before defining it in `TeXdict' by
-`color.pro'. (On MS-DOS, you will have to call this file
-`mycolordev.cfg'.)
+This will then define 'Goldenrod' in your device's CMYK values in
+'userdict' which is checked before defining it in 'TeXdict' by
+'color.pro'. (On MS-DOS, you will have to call this file
+'mycolordev.cfg'.)
- This mechanism, together with additions to `colordvi.tex' and
-`blackdvi.tex' (and the `.sty' files), can also be used to predefine
+ This mechanism, together with additions to 'colordvi.tex' and
+'blackdvi.tex' (and the '.sty' files), can also be used to predefine
other colors for your users.

@@ -3698,7 +3616,7 @@ File: dvips.info, Node: Color support details, Prev: Color device configuratio
=========================
To support color, Dvips recognizes a certain set of specials. These
-specials start with the keyword `color' or the keyword `background',
+specials start with the keyword 'color' or the keyword 'background',
followed by a color specification.
* Menu:
@@ -3714,24 +3632,24 @@ File: dvips.info, Node: Color specifications, Next: Color specials, Up: Color
What is a color specification? One of three things. First, it might be
a PostScript procedure as defined in a PostScript header file. The
-`color.pro' file defines 64 of these, including `Maroon'. This
+'color.pro' file defines 64 of these, including 'Maroon'. This
PostScript procedure must set the current color to be some value; in
-this case, `Maroon' is defined as `0 0.87 0.68 0.32 setcmykcolor'.
+this case, 'Maroon' is defined as '0 0.87 0.68 0.32 setcmykcolor'.
The second possibility is the name of a color model (initially, one
-of `rgb', `hsb', `cmyk', or `gray') followed by the appropriate number
+of 'rgb', 'hsb', 'cmyk', or 'gray') followed by the appropriate number
of parameters. When Dvips encounters such a macro, it sends out the
-parameters first, followed by the string created by prefixing
-`TeXcolor' to the color model. Thus, the color specification `rgb 0.3
-0.4 0.5' would generate the PostScript code `0.3 0.4 0.5 TeXrgbcolor'.
-Note that the case of zero arguments is disallowed, as that is handled
-by the single keyword case (`Maroon') above, where no changes to the
-name are made before it is sent to the PostScript file.
+parameters first, followed by the string created by prefixing 'TeXcolor'
+to the color model. Thus, the color specification 'rgb 0.3 0.4 0.5'
+would generate the PostScript code '0.3 0.4 0.5 TeXrgbcolor'. Note that
+the case of zero arguments is disallowed, as that is handled by the
+single keyword case ('Maroon') above, where no changes to the name are
+made before it is sent to the PostScript file.
The third and final type of color specification is a double quote
followed by any sequence of PostScript. The double quote is stripped
-from the output. For instance, the color specification `"AggiePattern
-setpattern' will set the `color' to the Aggie logo pattern (assuming
+from the output. For instance, the color specification '"AggiePattern
+setpattern' will set the 'color' to the Aggie logo pattern (assuming
such exists.)

@@ -3740,43 +3658,42 @@ File: dvips.info, Node: Color specials, Prev: Color specifications, Up: Color
7.6.2 Color specials
--------------------
-We will describe `background' first, since it is the simplest. The
-`background' keyword must be followed by a color specification. That
+We will describe 'background' first, since it is the simplest. The
+'background' keyword must be followed by a color specification. That
color specification is used as a fill color for the background. The
-last `background' special on a page is the one that gets issued, and it
+last 'background' special on a page is the one that gets issued, and it
gets issued at the very beginning of the page, before any text or
-specials are sent. (This is possible because the prescan phase of
-Dvips notices all of the color specials so that the appropriate
-information can be written out during the second phase.)
+specials are sent. (This is possible because the prescan phase of Dvips
+notices all of the color specials so that the appropriate information
+can be written out during the second phase.)
- The `color' special itself has three forms. The first is just
-`color' followed by a color specification. In this case, the current
+ The 'color' special itself has three forms. The first is just
+'color' followed by a color specification. In this case, the current
global color is set to that color; the color stack must be empty when
such a command is executed.
- The second form is `color push' followed by a color specification.
+ The second form is 'color push' followed by a color specification.
This saves the current color on the color stack and sets the color to be
that given by the color specification. This is the most common way to
set a color.
- The final version of the `color' special is just `color pop', with
-no color specification; this says to pop the color last pushed on the
-color stack from the color stack and set the current color to be that
-color.
+ The final version of the 'color' special is just 'color pop', with no
+color specification; this says to pop the color last pushed on the color
+stack from the color stack and set the current color to be that color.
Dvips correctly handles these color specials across pages, even when
the pages are repeated or reversed.
These color specials can be used for things such as patterns or
-screens as well as simple colors. However, note that in the
-PostScript, only one color specification can be active at a time. For
-instance, at the beginning of a page, only the bottommost entry on the
-color stack is sent; also, when a color is popped, all that is done is
-that the color specification from the previous stack entry is sent. No
-`gsave' or `grestore' is used. This means that you cannot easily mix
-usage of the `color' specials for screens and colors, just one or the
-other. This may be addressed in the future by adding support for
-different categories of color-like state.
+screens as well as simple colors. However, note that in the PostScript,
+only one color specification can be active at a time. For instance, at
+the beginning of a page, only the bottommost entry on the color stack is
+sent; also, when a color is popped, all that is done is that the color
+specification from the previous stack entry is sent. No 'gsave' or
+'grestore' is used. This means that you cannot easily mix usage of the
+'color' specials for screens and colors, just one or the other. This
+may be addressed in the future by adding support for different
+categories of color-like state.

File: dvips.info, Node: Index, Prev: Color, Up: Top
@@ -3788,12 +3705,12 @@ Index
* Menu:
* ! special (literal PS header): Literal headers. (line 6)
-* ! starting output filename: Option details. (line 233)
+* ! starting output filename: Option details. (line 238)
* " special (literal PostScript): " special. (line 6)
* %%BoundingBox: Bounding box. (line 17)
* %%Page, and multi-page information: PostScript hooks. (line 37)
-* %%Page, not generating: Option details. (line 198)
-* %%Page, removing: Option details. (line 154)
+* %%Page, not generating: Option details. (line 203)
+* %%Page, removing: Option details. (line 160)
* %%Page, required by Ghostview: Ghostscript installation.
(line 17)
* %%VMusage: Headers and memory usage.
@@ -3801,81 +3718,81 @@ Index
* %*Font: Fonts in figures. (line 6)
* (atend), bounding box specification: Bounding box. (line 28)
* +PSMAPFILE: Configuration file commands.
- (line 109)
+ (line 117)
* -: Option details. (line 11)
-* - as output filename: Option details. (line 233)
-* --help <1>: Option details. (line 15)
+* - as output filename: Option details. (line 238)
* --help: Option summary. (line 7)
+* --help <1>: Option details. (line 15)
* --version: Option details. (line 18)
-* -A: Option details. (line 27)
* -a: Option details. (line 21)
+* -A: Option details. (line 27)
* -B: Option details. (line 37)
* -b NUM: Option details. (line 31)
-* -C NUM: Option details. (line 46)
* -c NUM: Option details. (line 41)
+* -C NUM: Option details. (line 46)
* -c RATIO: Afm2tfm options. (line 33)
-* -D NUM: Option details. (line 58)
* -d NUM: Option details. (line 52)
+* -D NUM: Option details. (line 58)
* -E: Option details. (line 82)
* -e NUM: Option details. (line 71)
* -e RATIO: Afm2tfm options. (line 37)
-* -F: Option details. (line 110)
* -f: Option details. (line 98)
+* -F: Option details. (line 110)
* -G: Option details. (line 117)
* -h NAME: Option details. (line 122)
* -i: Option details. (line 127)
-* -j for partial font downloading: Option details. (line 140)
-* -K: Option details. (line 154)
-* -k for cropmarks: Option details. (line 146)
-* -l [=]NUM: Option details. (line 163)
-* -M: Option details. (line 184)
-* -m: Option details. (line 172)
-* -mode: Option details. (line 175)
-* -mode MODE: Option details. (line 175)
-* -N: Option details. (line 198)
-* -n NUM: Option details. (line 195)
-* -noomega: Option details. (line 206)
-* -noptex: Option details. (line 212)
+* -j for partial font downloading: Option details. (line 146)
+* -K: Option details. (line 160)
+* -k for cropmarks: Option details. (line 152)
+* -l [=]NUM: Option details. (line 169)
+* -m: Option details. (line 178)
+* -M: Option details. (line 190)
+* -mode: Option details. (line 181)
+* -mode MODE: Option details. (line 181)
+* -N: Option details. (line 203)
+* -n NUM: Option details. (line 200)
+* -noomega: Option details. (line 211)
+* -noptex: Option details. (line 217)
* -O: Afm2tfm options. (line 41)
-* -o NAME: Option details. (line 228)
-* -O X-OFFSET,Y-OFFSET: Option details. (line 245)
-* -p [=]NUM: Option details. (line 263)
-* -P PRINTER: Option details. (line 277)
-* -p PS-ENC <1>: Afm2tfm options. (line 46)
+* -o NAME: Option details. (line 233)
+* -O X-OFFSET,Y-OFFSET: Option details. (line 250)
+* -P PRINTER: Option details. (line 282)
* -p PS-ENC: Changing PostScript encodings.
(line 6)
-* -pp FIRST-LAST: Option details. (line 272)
-* -pp RANGE: Option details. (line 272)
+* -p PS-ENC <1>: Afm2tfm options. (line 46)
+* -p [=]NUM: Option details. (line 268)
+* -pp FIRST-LAST: Option details. (line 277)
+* -pp RANGE: Option details. (line 277)
* -PPRINTER, and config file searching: Configuration file searching.
(line 27)
-* -q: Option details. (line 296)
-* -R: Option details. (line 303)
-* -r: Option details. (line 300)
-* -s: Option details. (line 311)
-* -S NUM: Option details. (line 318)
+* -q: Option details. (line 301)
+* -r: Option details. (line 305)
+* -R: Option details. (line 308)
+* -s: Option details. (line 316)
+* -S NUM: Option details. (line 323)
* -s SLANT: Afm2tfm options. (line 51)
* -T ENC-FILE: Changing both encodings.
(line 6)
-* -T HSIZE,VSIZE: Option details. (line 347)
-* -t PAPERTYPE: Option details. (line 323)
+* -T HSIZE,VSIZE: Option details. (line 348)
+* -t PAPERTYPE: Option details. (line 328)
* -T PS-TEX-ENC: Afm2tfm options. (line 61)
-* -t TEX-ENC <1>: Afm2tfm options. (line 56)
* -t TEX-ENC: Changing TeX encodings.
(line 6)
+* -t TEX-ENC <1>: Afm2tfm options. (line 56)
+* -U: Option details. (line 363)
* -u: Afm2tfm options. (line 65)
-* -U: Option details. (line 362)
-* -u PSMAPFILE: Option details. (line 354)
-* -V: Option details. (line 373)
-* -v: Option details. (line 370)
-* -V VPL-FILE: Afm2tfm options. (line 74)
+* -u PSMAPFILE: Option details. (line 355)
+* -v: Option details. (line 371)
+* -V: Option details. (line 374)
* -v VPL-FILE: Afm2tfm options. (line 71)
-* -X NUM: Option details. (line 390)
-* -x NUM: Option details. (line 382)
-* -Y NUM: Option details. (line 397)
+* -V VPL-FILE: Afm2tfm options. (line 74)
+* -x NUM: Option details. (line 383)
+* -X NUM: Option details. (line 391)
+* -Y NUM: Option details. (line 398)
* -z: Hypertext. (line 6)
-* -Z for compressing bitmap fonts: Option details. (line 406)
-* -z for recognizing hyperdvi: Option details. (line 400)
-* ..-relative filenames: Option details. (line 303)
+* -Z for compressing bitmap fonts: Option details. (line 407)
+* -z for recognizing hyperdvi: Option details. (line 401)
+* '..'-relative filenames: Option details. (line 308)
* .afm Adobe metric files: Metric files. (line 26)
* .dvipsrc, searched for: Configuration file searching.
(line 14)
@@ -3889,12 +3806,13 @@ Index
* .pfb extension required for partial downloading: psfonts.map.
(line 46)
* .pfb printer font binary files: Glyph files. (line 25)
-* .pfm printer font metric files: Metric files. (line 49)
+* .pfm printer font metric files: Metric files. (line 48)
* .pl property list files: Metric files. (line 39)
* .pro prologue files: Header files. (line 12)
* .tfm TeX font metric files: Metric files. (line 31)
* /#copies: Option details. (line 31)
-* /magscale: EPSF scaling. (line 67)
+* /#copies <1>: Option details. (line 41)
+* /magscale: EPSF scaling. (line 66)
* 612 792 bounding box size: Bounding box. (line 43)
* 8r encoding, and extra characters: Changing PostScript encodings.
(line 24)
@@ -3908,56 +3826,53 @@ Index
* @ paper size config command: Configuration file commands.
(line 18)
* \.: Reencoding with Afm2tfm.
- (line 44)
+ (line 43)
* \AA: Reencoding with Afm2tfm.
- (line 44)
-* \COLORNAME: Color macro files. (line 31)
+ (line 43)
+* \COLORNAME: Color macro files. (line 30)
* \dot: Reencoding with Afm2tfm.
- (line 44)
+ (line 43)
* \epsffile macro: EPSF macros. (line 38)
* \epsfsize: EPSF scaling. (line 29)
* \epsfverbosetrue: EPSF macros. (line 46)
* \epsfxsize: EPSF scaling. (line 14)
* \epsfysize: EPSF scaling. (line 20)
* \H: Reencoding with Afm2tfm.
- (line 44)
+ (line 43)
* \includegraphics LaTeX macro: \includegraphics. (line 6)
* \leavevmode: EPSF macros. (line 26)
-* \magnification: EPSF scaling. (line 63)
+* \magnification: EPSF scaling. (line 62)
* \rotninety: Literal examples. (line 27)
-* \textCOLORNAME: Color macro files. (line 46)
+* \textCOLORNAME: Color macro files. (line 45)
+* | starting output filename: Option details. (line 238)
* a config command (memory conservation): Configuration file commands.
(line 21)
* A ring, Scandinavian letter: Reencoding with Afm2tfm.
(line 32)
-* a3 papertype: Option details. (line 323)
+* a3 papertype: Option details. (line 328)
* a4 paper size: Config file paper sizes.
- (line 84)
-* a4 papertype: Option details. (line 323)
+ (line 82)
+* a4 papertype: Option details. (line 328)
* A4size paper size: Config file paper sizes.
- (line 92)
-* absolute filenames, disabling: Option details. (line 303)
-* absolute page number, and -l: Option details. (line 163)
-* absolute page number, and -p: Option details. (line 263)
+ (line 90)
+* absolute filenames, disabling: Option details. (line 308)
+* absolute page number, and '-l': Option details. (line 169)
+* absolute page number, and '-p': Option details. (line 268)
* accents, in wrong position: Reencoding with Afm2tfm.
(line 32)
* accents, wrong: Afm2tfm options. (line 17)
* accuracy in positioning: Option details. (line 71)
-* Adobe fonts: PostScript font installation.
- (line 10)
-* Adobe fonts, installing: PostScript font installation.
- (line 19)
* afm files: Metric files. (line 26)
-* afm2tfm <1>: Invoking afm2tfm. (line 6)
* afm2tfm: Making a font available.
(line 46)
+* afm2tfm <1>: Invoking afm2tfm. (line 6)
* afm2tfm options: Afm2tfm options. (line 6)
* after header, inserting code: Including headers from TeX.
(line 28)
* Aladdin Ghostscript: Ghostscript installation.
(line 6)
* Anderson, Laurie: Hypertext specials. (line 42)
-* angle (psfile special option): psfile special. (line 36)
+* angle ('psfile' special option): psfile special. (line 36)
* arcs: Glyph files. (line 17)
* ASCII character codes, used by PostScript: PostScript typesetting.
(line 31)
@@ -3966,24 +3881,20 @@ Index
(line 24)
* base: Hypertext specials. (line 57)
* base encoding, recommended: psfonts.map. (line 31)
-* base fonts: Virtual fonts. (line 24)
+* base fonts: Virtual fonts. (line 23)
* bbfig: Bounding box. (line 37)
* before header, inserting code: Including headers from TeX.
(line 28)
* Bhattacharya, Tanmoy: Hypertext. (line 21)
* big points: Bounding box. (line 11)
-* Bigelow & Holmes fonts: PostScript font installation.
- (line 10)
* binary files, not supported: Including graphics fails.
(line 23)
* bitmap fonts: Glyph files. (line 30)
-* Bitstream fonts, installing: PostScript font installation.
- (line 19)
* bop undefined error: Printer errors. (line 6)
-* bop-hook <1>: PostScript hooks. (line 11)
-* bop-hook <2>: EPSF scaling. (line 75)
* bop-hook: Paper trays. (line 6)
-* bop-hook, and offset pages: Option details. (line 258)
+* bop-hook <1>: EPSF scaling. (line 74)
+* bop-hook <2>: PostScript hooks. (line 11)
+* bop-hook, and offset pages: Option details. (line 263)
* boundary character: Encoding file format.
(line 41)
* bounding box, comment for: Bounding box. (line 6)
@@ -3991,8 +3902,8 @@ Index
* bounding box, determining: Bounding box. (line 37)
* bounding box, finding tight: Option details. (line 82)
* bounding box, inaccurate: EPSF clipping. (line 6)
-* bounding box, supplying to TeX <1>: EPSF macros. (line 26)
* bounding box, supplying to TeX: \includegraphics. (line 36)
+* bounding box, supplying to TeX <1>: EPSF macros. (line 26)
* c include additional config file: Configuration file commands.
(line 27)
* changing PostScript encodings: Changing PostScript encodings.
@@ -4005,17 +3916,17 @@ Index
(line 6)
* CharStrings Type 1 dictionary: PostScript typesetting.
(line 51)
-* clip (psfile special option): psfile special. (line 39)
+* clip ('psfile' special option): psfile special. (line 39)
* clipping of EPSF: EPSF clipping. (line 6)
* CODINGSCHEME: Reencoding with Afm2tfm.
- (line 52)
+ (line 51)
* collated copies: Option details. (line 46)
* color: Color. (line 6)
* color configuration: Color device configuration.
(line 6)
* color macros: Color macro files. (line 6)
* color names, mixed case: Color macro files. (line 16)
-* color nesting level: Color macro files. (line 39)
+* color nesting level: Color macro files. (line 38)
* color separations: Option details. (line 31)
* color specifications: Color specifications.
(line 6)
@@ -4029,21 +3940,21 @@ Index
(line 13)
* comments, in encoding files: Encoding file format.
(line 20)
-* comments, removing included: Option details. (line 154)
+* comments, removing included: Option details. (line 160)
* compilation: Installation. (line 6)
* compressed PostScript: Dynamic creation of graphics.
(line 6)
-* compressing bitmap fonts: Option details. (line 406)
+* compressing bitmap fonts: Option details. (line 407)
* Computer Modern in PostScript: Hypertext caveats. (line 6)
* Computer Modern, encoding of: Encodings. (line 15)
* condensed fonts: Afm2tfm options. (line 37)
* config.proto: config.ps installation.
- (line 15)
-* config.ps: Option details. (line 277)
+ (line 14)
+* config.ps: Option details. (line 282)
* config.ps installation: config.ps installation.
(line 6)
* config.ps paper sizes: Config file paper sizes.
- (line 84)
+ (line 82)
* config.ps, searched for: Configuration file searching.
(line 10)
* configuration file options: Configuration file commands.
@@ -4058,7 +3969,7 @@ Index
* configuration files, creating: config.ps installation.
(line 6)
* configuration files, prototype: config.ps installation.
- (line 15)
+ (line 14)
* configuration, of color devices: Color device configuration.
(line 6)
* configuration, of Dvips: Installation. (line 6)
@@ -4069,8 +3980,8 @@ Index
* copies, duplicated page bodies: Option details. (line 31)
* copies, uncollated: Option details. (line 41)
* Crayola crayon box: Color macro files. (line 16)
-* crop.pro: Option details. (line 146)
-* cropmarks: Option details. (line 146)
+* crop.pro: Option details. (line 152)
+* cropmarks: Option details. (line 152)
* current font, in PostScript: PostScript typesetting.
(line 35)
* D config command (dpi): Configuration file commands.
@@ -4078,24 +3989,24 @@ Index
* dated output: PostScript hooks. (line 16)
* datestamp, in output: Configuration file commands.
(line 37)
-* debugging <1>: Option details. (line 52)
* debugging: Diagnosing problems. (line 6)
+* debugging <1>: Option details. (line 52)
* debugging options: Debug options. (line 6)
* default resolutions: Configuration file commands.
- (line 131)
+ (line 138)
* default_texsizes Make variable: Configuration file commands.
- (line 147)
+ (line 154)
* Deutsch, Peter: Ghostscript installation.
(line 6)
* device dependency, and virtual fonts: Configuration file commands.
- (line 170)
-* dictionary, CharStrings: PostScript typesetting.
+ (line 177)
+* dictionary, 'CharStrings': PostScript typesetting.
(line 51)
* dictionary, PostScript language: PostScript typesetting.
(line 35)
-* dictionary, SDict: Literal headers. (line 6)
-* dictionary, userdict: Header files. (line 21)
-* distillation, and -z: Option details. (line 400)
+* dictionary, 'SDict': Literal headers. (line 6)
+* dictionary, 'userdict': Header files. (line 21)
+* distillation, and '-z': Option details. (line 401)
* distiller, for PDF files: Hypertext. (line 11)
* dot accent: Reencoding with Afm2tfm.
(line 32)
@@ -4107,7 +4018,7 @@ Index
* dual paper trays: Paper trays. (line 6)
* duplex printers: Including headers from the command line.
(line 13)
-* DVI magnification: EPSF scaling. (line 63)
+* DVI magnification: EPSF scaling. (line 62)
* dvihps, hyperdvi to PostScript: Hypertext. (line 21)
* Dvips configuration file options: Configuration file commands.
(line 6)
@@ -4127,7 +4038,7 @@ Index
* DVIPSSIZES: Environment variables.
(line 46)
* DVIPSSIZES, overrides R: Configuration file commands.
- (line 144)
+ (line 151)
* dynamic creation of graphics: Dynamic creation of graphics.
(line 6)
* e config command (maxdrift): Configuration file commands.
@@ -4165,34 +4076,34 @@ Index
* error messages from printer: Printer errors. (line 6)
* even pages only: Option details. (line 37)
* examples of literal PostScript: Literal examples. (line 6)
-* expanded fonts <1>: psfonts.map. (line 19)
-* expanded fonts <2>: Afm2tfm options. (line 37)
* expanded fonts: Special font effects.
(line 24)
-* expansion, of virtual fonts: Virtual fonts. (line 34)
+* expanded fonts <1>: Afm2tfm options. (line 37)
+* expanded fonts <2>: psfonts.map. (line 19)
+* expansion, of virtual fonts: Virtual fonts. (line 33)
* extended URL: Hypertext specials. (line 20)
* ExtendFont: Special font effects.
(line 28)
* extra characters, accessing: Changing PostScript encodings.
(line 18)
-* F config command (filter): Configuration file commands.
- (line 45)
* f config command (filter): Configuration file commands.
(line 45)
+* F config command (filter): Configuration file commands.
+ (line 45)
* failure, and printer errors: Printer errors. (line 6)
* failure, of long documents: Long documents fail. (line 6)
* failure, to include graphics: Including graphics fails.
(line 6)
* failure, to print at all: No output. (line 6)
* fallback resolutions: Configuration file commands.
- (line 131)
+ (line 138)
* figures and fonts: Fonts in figures. (line 6)
* figures, natural size: EPSF macros. (line 38)
* figures, scaling: EPSF scaling. (line 6)
* filter, running as a: Option details. (line 98)
-* first page printed: Option details. (line 263)
+* first page printed: Option details. (line 268)
* font concepts: Font concepts. (line 6)
-* font generation, avoiding: Option details. (line 184)
+* font generation, avoiding: Option details. (line 190)
* fontinst: Invoking afm2tfm. (line 13)
* fonts, as header files: Including headers from TeX.
(line 13)
@@ -4213,7 +4124,7 @@ Index
* fonts, small caps: Special font effects.
(line 34)
* fonts, system PostScript: PostScript font installation.
- (line 24)
+ (line 11)
* G character shifting config command: Configuration file commands.
(line 48)
* gf files: Glyph files. (line 41)
@@ -4222,11 +4133,11 @@ Index
(line 6)
* ghostview: Ghostscript installation.
(line 17)
-* Ghostview, and no N: Ghostscript installation.
+* Ghostview, and no 'N': Ghostscript installation.
(line 17)
* glyph files: Glyph files. (line 6)
* GLYPHFONTS, overrides P: Configuration file commands.
- (line 118)
+ (line 126)
* GNU Ghostscript: Ghostscript installation.
(line 13)
* gnuplot: Dynamic creation of graphics.
@@ -4236,7 +4147,7 @@ Index
* gs installation: Ghostscript installation.
(line 6)
* gsave/grestore, and literal PS: Literal examples. (line 27)
-* gsftopk: Option details. (line 374)
+* gsftopk: Option details. (line 375)
* h header downloading config command: Configuration file commands.
(line 52)
* H header path config command: Configuration file commands.
@@ -4256,22 +4167,21 @@ Index
(line 6)
* hints: PostScript typesetting.
(line 55)
-* hoffset (psfile special option): psfile special. (line 18)
-* HP printers and Type 1 fonts: PostScript font installation.
- (line 69)
+* hoffset ('psfile' special option): psfile special. (line 18)
* HP4Si printer and paper trays: Paper trays. (line 6)
* href: Hypertext specials. (line 32)
-* hscale (psfile special option): psfile special. (line 30)
-* hsize (psfile special option): psfile special. (line 24)
+* hscale ('psfile' special option): psfile special. (line 30)
+* hsize ('psfile' special option): psfile special. (line 24)
* html specials: Hypertext. (line 6)
-* html specials, and -z: Option details. (line 400)
-* http://www.win.tue.nl/~dickie/idvi: Hypertext. (line 21)
-* http://xxx.lanl.gov/hypertex: Hypertext. (line 21)
+* html specials, and '-z': Option details. (line 401)
+* 'http://www.win.tue.nl/~dickie/idvi': Hypertext. (line 21)
+* 'http://xxx.lanl.gov/hypertex': Hypertext. (line 21)
* Hungarian umlaut: Reencoding with Afm2tfm.
(line 32)
-* hyperdvi extensions, enabling: Option details. (line 400)
+* hyperdvi extensions, enabling: Option details. (line 401)
* hypertext and bitmap fonts: Hypertext caveats. (line 6)
* hypertext caveats: Hypertext caveats. (line 6)
+* hypertext caveats <1>: Hypertext caveats. (line 6)
* hypertext specials: Hypertext specials. (line 6)
* hypertext support: Hypertext. (line 6)
* i config command (pages/section): Configuration file commands.
@@ -4286,7 +4196,7 @@ Index
(line 6)
* including headers in TeX: Including headers from TeX.
(line 6)
-* installation of config.ps: config.ps installation.
+* installation of 'config.ps': config.ps installation.
(line 6)
* installation of PostScript fonts: PostScript font installation.
(line 6)
@@ -4308,21 +4218,21 @@ Index
(line 18)
* landscape orientation, defined: Paper size and landscape.
(line 11)
-* landscape papertype: Option details. (line 323)
-* landscape, as \special: papersize special. (line 16)
-* last page printed: Option details. (line 163)
-* last-resort font scaling, with DVIPSSIZES: Environment variables.
+* landscape papertype: Option details. (line 328)
+* landscape, as '\special': papersize special. (line 16)
+* last page printed: Option details. (line 169)
+* last-resort font scaling, with 'DVIPSSIZES': Environment variables.
(line 47)
-* last-resort scaling, with R: Configuration file commands.
- (line 131)
-* ledger papertype: Option details. (line 323)
-* legal papertype: Option details. (line 323)
+* last-resort scaling, with 'R': Configuration file commands.
+ (line 138)
+* ledger papertype: Option details. (line 328)
+* legal papertype: Option details. (line 328)
* letter paper size: Config file paper sizes.
- (line 84)
-* letter papertype: Option details. (line 323)
+ (line 82)
+* letter papertype: Option details. (line 328)
* letterhead tray: Paper trays. (line 10)
* letterSize paper size: Config file paper sizes.
- (line 92)
+ (line 90)
* ligature operations: Encoding file format.
(line 54)
* ligature, defined: Metric files. (line 15)
@@ -4333,28 +4243,26 @@ Index
* literal headers: Literal headers. (line 6)
* literal PostScript, examples: Literal examples. (line 6)
* literal PostScript, using: Literal PS. (line 6)
-* llx (psfile special option): psfile special. (line 42)
-* lly (psfile special option): psfile special. (line 42)
+* llx ('psfile' special option): psfile special. (line 42)
+* lly ('psfile' special option): psfile special. (line 42)
* long documents not printing: Long documents fail. (line 6)
* low characters, shifting: Option details. (line 117)
-* lpr spooler, MS-DOS emulation: Option details. (line 233)
-* Lucida, installing: PostScript font installation.
- (line 10)
+* lpr spooler, MS-DOS emulation: Option details. (line 238)
* m config command (available memory): Configuration file commands.
(line 71)
* M config command (mf mode): Configuration file commands.
- (line 90)
+ (line 98)
* macros for color: Color macro files. (line 6)
-* macros for epsf inclusion <1>: EPSF macros. (line 6)
* macros for epsf inclusion: \includegraphics. (line 6)
-* magnification, DVI: EPSF scaling. (line 63)
-* magnification, overriding DVI: Option details. (line 382)
-* magnification, vertical: Option details. (line 393)
+* macros for epsf inclusion <1>: EPSF macros. (line 6)
+* magnification, DVI: EPSF scaling. (line 62)
+* magnification, overriding DVI: Option details. (line 383)
+* magnification, vertical: Option details. (line 394)
* mailcap and hypertext: Hypertext specials. (line 53)
-* manual feed: Option details. (line 172)
+* manual feed: Option details. (line 178)
* maxdrift: Option details. (line 71)
-* maximum pages printed: Option details. (line 195)
-* media: Option details. (line 323)
+* maximum pages printed: Option details. (line 200)
+* media: Option details. (line 328)
* memory available: Configuration file commands.
(line 71)
* memory of printer exhausted: Printer errors. (line 14)
@@ -4365,73 +4273,69 @@ Index
(line 104)
* Metafont ligature operations: Encoding file format.
(line 54)
-* Metafont mode, specifying: Option details. (line 175)
+* Metafont mode, specifying: Option details. (line 181)
* Metafont source files: Glyph files. (line 30)
* metric files: Metric files. (line 6)
* Minion typeface family: psfonts.map. (line 60)
-* missfont.log: Option details. (line 184)
-* MISSFONT_LOG: Option details. (line 187)
+* missfont.log: Option details. (line 190)
+* MISSFONT_LOG: Option details. (line 193)
* Mitsubishi Shinko CHC-S446i printer: No output. (line 14)
* mkdvipspapers: Config file paper sizes.
- (line 80)
-* mktexpk, avoiding: Option details. (line 184)
+ (line 79)
+* mktexpk, avoiding: Option details. (line 190)
* mktexpk, changing name: Environment variables.
(line 36)
-* mode name, specifying: Option details. (line 175)
-* Monotype fonts: PostScript font installation.
- (line 10)
-* Monotype fonts, installing: PostScript font installation.
- (line 19)
-* mtpk: Option details. (line 374)
+* mode name, specifying: Option details. (line 181)
+* mtpk: Option details. (line 375)
* multiple master fonts: psfonts.map. (line 60)
* multiple output files: Option details. (line 127)
* multiple paper trays: Paper trays. (line 6)
* Murphy, Tim: Hypertext specials. (line 20)
* N EPS-disabling config command: Configuration file commands.
- (line 93)
+ (line 101)
* name: Hypertext specials. (line 41)
* narrow fonts: psfonts.map. (line 19)
* no output at all: No output. (line 6)
* non-printing characters, shifting: Option details. (line 117)
* non-resident fonts: psfonts.map. (line 6)
-* nopaper, paper format for -t: Config file paper sizes.
- (line 75)
+* nopaper, paper format for '-t': Config file paper sizes.
+ (line 74)
* O config command (offset): Configuration file commands.
- (line 106)
+ (line 114)
* o config command (output file): Configuration file commands.
- (line 98)
+ (line 106)
* oblique fonts: Special font effects.
(line 6)
* octal character codes: Afm2tfm options. (line 41)
* odd pages only: Option details. (line 27)
-* offset pages: Option details. (line 245)
-* Omega extensions: Option details. (line 206)
+* offset pages: Option details. (line 250)
+* Omega extensions: Option details. (line 211)
* option, details of: Option details. (line 6)
* options, debugging: Debug options. (line 6)
* options, Dvips: Invoking Dvips. (line 6)
* options, reading from standard input: Option details. (line 11)
* options, summary: Option summary. (line 6)
* options, to Afm2tfm: Afm2tfm options. (line 6)
+* outline fonts: Glyph files. (line 17)
* outline fonts <1>: Special font effects.
(line 50)
-* outline fonts: Glyph files. (line 17)
* output file, sectioning of: Headers and memory usage.
(line 6)
* output file, setting: Configuration file commands.
- (line 98)
+ (line 106)
* output files, multiple: Option details. (line 127)
* output, inverted: Small or inverted. (line 6)
* output, none: No output. (line 6)
-* output, redirecting: Option details. (line 228)
+* output, redirecting: Option details. (line 233)
* output, too small: Small or inverted. (line 6)
* p config command (font aliases): Configuration file commands.
- (line 109)
+ (line 117)
* P config command (PK path): Configuration file commands.
- (line 118)
-* page range: Option details. (line 272)
-* page, first printed: Option details. (line 263)
-* page, last printed: Option details. (line 163)
-* pages, maximum printed: Option details. (line 195)
+ (line 126)
+* page range: Option details. (line 277)
+* page, first printed: Option details. (line 268)
+* page, last printed: Option details. (line 169)
+* pages, maximum printed: Option details. (line 200)
* PaintType: Special font effects.
(line 50)
* Pantone colors: Color macro files. (line 16)
@@ -4442,32 +4346,32 @@ Index
* paper size, general: Paper size and landscape.
(line 6)
* paper trays: Paper trays. (line 6)
-* paper type: Option details. (line 323)
+* paper type: Option details. (line 328)
* papersize special: papersize special. (line 6)
-* papersize special, and no -t: Option details. (line 323)
+* papersize special, and no '-t': Option details. (line 328)
* partial font downloading: psfonts.map. (line 55)
* PDF files, font quality: Hypertext caveats. (line 6)
-* PDF files, making <1>: Hypertext. (line 11)
* PDF files, making: Ghostscript installation.
(line 6)
-* PDF files, option for: Option details. (line 400)
+* PDF files, making <1>: Hypertext. (line 11)
+* PDF files, option for: Option details. (line 401)
* pdfmark: Hypertext. (line 6)
* pfa files: Glyph files. (line 25)
* pfb files: Glyph files. (line 25)
* pfb files, automatically unpacked: psfonts.map. (line 49)
-* pfm files: Metric files. (line 49)
+* pfm files: Metric files. (line 48)
* Phaser printer, used for color calibration: Color device configuration.
(line 18)
-* physical page number, and -l: Option details. (line 163)
-* physical page number, and -p: Option details. (line 263)
-* physical page number, and bop-hook: PostScript hooks. (line 26)
+* physical page number, and '-l': Option details. (line 169)
+* physical page number, and '-p': Option details. (line 268)
+* physical page number, and 'bop-hook': PostScript hooks. (line 26)
* pipes, not readable: Option details. (line 98)
* pk files: Glyph files. (line 35)
* PKFONTS, overrides P: Configuration file commands.
- (line 118)
-* plotfile, ps subspecial: ps special. (line 30)
+ (line 126)
+* plotfile, 'ps' subspecial: ps special. (line 29)
* pltotf: Metric files. (line 39)
-* popen for output: Option details. (line 233)
+* popen for output: Option details. (line 238)
* portrait orientation, defined: Paper size and landscape.
(line 11)
* positioning accuracy: Option details. (line 71)
@@ -4477,14 +4381,14 @@ Index
* PostScript encoding: Encodings. (line 27)
* PostScript encoding, changing: Changing PostScript encodings.
(line 6)
+* PostScript font alias file: Option details. (line 355)
* PostScript font alias file <1>: Configuration file commands.
- (line 109)
-* PostScript font alias file: Option details. (line 354)
+ (line 117)
* PostScript fonts: PostScript fonts. (line 6)
* PostScript fonts, installing: PostScript font installation.
(line 6)
* PostScript fonts, on your system: PostScript font installation.
- (line 24)
+ (line 11)
* PostScript header files: Header files. (line 6)
* PostScript hooks: PostScript hooks. (line 6)
* PostScript interaction: Interaction with PostScript.
@@ -4502,40 +4406,41 @@ Index
* printer configuration: config.ps installation.
(line 6)
* printer configuration file, prototype: config.ps installation.
- (line 15)
+ (line 14)
* printer errors: Printer errors. (line 6)
* printer memory: Configuration file commands.
(line 71)
* printer memory exhausted: Printer errors. (line 14)
-* printer offset: Option details. (line 245)
+* printer offset: Option details. (line 250)
* PRINTER, and config file searching: Configuration file searching.
(line 36)
-* PRINTER, avoided with -f: Option details. (line 98)
+* PRINTER, avoided with '-f': Option details. (line 98)
* printer, driving directly: Option details. (line 110)
* problems: Diagnosing problems. (line 6)
* property list files: Metric files. (line 39)
* prototype printer configuration file: config.ps installation.
- (line 15)
+ (line 14)
* ps special: ps special. (line 6)
* psfile special: psfile special. (line 6)
-* psfonts.map <1>: psfonts.map. (line 6)
-* psfonts.map <2>: Special font effects.
- (line 19)
* psfonts.map: PostScript font installation.
- (line 24)
+ (line 11)
+* psfonts.map <1>: Special font effects.
+ (line 19)
+* psfonts.map <2>: psfonts.map. (line 6)
* psheaderdir: Header files. (line 12)
-* psi character missing: Hypertext caveats. (line 55)
-* pstopk: Option details. (line 374)
-* pTeX extensions: Option details. (line 206)
-* Q config command (quiet): Configuration file commands.
- (line 125)
+* psi character missing: Hypertext caveats. (line 54)
+* pstopk: Option details. (line 375)
+* pTeX extensions: Option details. (line 211)
+* pTeX extensions <1>: Option details. (line 217)
* q config command (quiet): Configuration file commands.
- (line 125)
-* quiet operation: Option details. (line 296)
+ (line 132)
+* Q config command (quiet): Configuration file commands.
+ (line 132)
+* quiet operation: Option details. (line 301)
* r config command (page reversal): Configuration file commands.
- (line 128)
+ (line 135)
* R fallback resolution config command: Configuration file commands.
- (line 131)
+ (line 138)
* reencode/*.enc: Encodings. (line 35)
* reencoding: Reencoding with Afm2tfm.
(line 6)
@@ -4544,47 +4449,48 @@ Index
(line 18)
* remapping: Reencoding with Afm2tfm.
(line 6)
-* resident fonts, different in different printers <1>: Configuration file commands.
- (line 109)
* resident fonts, different in different printers: Option details.
- (line 354)
-* resolution: Option details. (line 390)
+ (line 355)
+* resident fonts, different in different printers <1>: Configuration file commands.
+ (line 117)
+* resolution: Option details. (line 391)
+* resolution <1>: Option details. (line 398)
* resolution, setting: Option details. (line 58)
-* reverse pagination: Option details. (line 300)
-* rhi (psfile special option): psfile special. (line 46)
+* reverse pagination: Option details. (line 305)
+* rhi ('psfile' special option): psfile special. (line 46)
* Rokicki, Tomas: Why Dvips. (line 68)
-* rotate.tex: ps special. (line 34)
-* rwi (psfile special option): psfile special. (line 46)
+* rotate.tex: ps special. (line 33)
+* rwi ('psfile' special option): psfile special. (line 46)
* S config command (pict path): Configuration file commands.
- (line 156)
+ (line 163)
* s config command (save/restore): Configuration file commands.
- (line 153)
+ (line 160)
* save/restore, and inverted output: Small or inverted. (line 6)
* save/restore, and literal PS: Literal examples. (line 27)
* save/restore, and specials: ps special. (line 6)
-* save/restore, generating global: Option details. (line 311)
-* scaleunit: psfile special. (line 67)
+* save/restore, generating global: Option details. (line 316)
+* scaleunit: psfile special. (line 66)
* scaling of figures: EPSF scaling. (line 6)
* scaling small caps: Afm2tfm options. (line 33)
* Scandinavian A ring: Reencoding with Afm2tfm.
(line 32)
* screen frequencies, setting: Including headers from the command line.
(line 13)
-* SDict: psfile special. (line 67)
+* SDict: psfile special. (line 66)
* SDict dictionary: Literal headers. (line 6)
* searching config files, order of: Configuration file searching.
(line 6)
* sections of output file, and memory: Headers and memory usage.
(line 6)
* sections output, in separate files: Option details. (line 127)
-* security: Option details. (line 303)
-* shell command execution, disabling: Option details. (line 303)
+* security: Option details. (line 308)
+* shell command execution, disabling: Option details. (line 308)
* shell escape, in config file: Configuration file commands.
(line 37)
* Shinko CHC-S446i printer: No output. (line 14)
* show PostScript operator: PostScript typesetting.
(line 23)
-* silent operation: Option details. (line 296)
+* silent operation: Option details. (line 301)
* simplex mode on duplex printers: Including headers from the command line.
(line 13)
* slanted fonts: Special font effects.
@@ -4595,29 +4501,25 @@ Index
* small caps fonts: Special font effects.
(line 34)
* Smith, Arthur: Hypertext specials. (line 6)
-* Softkey fonts: PostScript font installation.
- (line 10)
-* Softkey fonts, installing: PostScript font installation.
- (line 19)
-* spaces, dropped trailing: Hypertext caveats. (line 55)
+* spaces, dropped trailing: Hypertext caveats. (line 54)
* specials, hypertext: Hypertext specials. (line 6)
* splines: Glyph files. (line 17)
* spooler, lacking: Option details. (line 110)
-* spooling to lpr on MS-DOS: Option details. (line 233)
+* spooling to lpr on MS-DOS: Option details. (line 238)
* standard I/O: Option details. (line 98)
* standard input, reading options from: Option details. (line 11)
-* standard output, output to: Option details. (line 228)
+* standard output, output to: Option details. (line 233)
* standard PostScript, required by Ghostview: Ghostscript installation.
(line 17)
* start-hook: PostScript hooks. (line 11)
-* structured comments: Option details. (line 198)
+* structured comments: Option details. (line 203)
* system in config file: Configuration file commands.
(line 37)
* T config command (TFM path): Configuration file commands.
- (line 161)
+ (line 168)
* Tektronix Phaser printer, used for color calibration: Color device configuration.
(line 18)
-* testpage.tex: Option details. (line 252)
+* testpage.tex: Option details. (line 257)
* TeX encoding, changing: Changing TeX encodings.
(line 6)
* TeX, including headers in: Including headers from TeX.
@@ -4625,29 +4527,29 @@ Index
* TEXCONFIG: Environment variables.
(line 55)
* TEXFONTS, overrides P: Configuration file commands.
- (line 118)
+ (line 126)
* TEXFONTS, overrides T: Configuration file commands.
- (line 161)
+ (line 168)
* TEXINPUTS, overrides S: Configuration file commands.
- (line 156)
+ (line 163)
* texmext.enc: Encodings. (line 35)
-* TEXMFOUTPUT: Option details. (line 187)
+* TEXMFOUTPUT: Option details. (line 193)
* texmital.enc: Encodings. (line 35)
+* texmsym.enc: Encodings. (line 35)
* texmsym.enc <1>: Changing TeX encodings.
(line 16)
-* texmsym.enc: Encodings. (line 35)
* TEXPICTS: Environment variables.
(line 62)
* TEXPICTS, overrides S: Configuration file commands.
- (line 156)
+ (line 163)
* TEXPKS, overrides P: Configuration file commands.
- (line 118)
+ (line 126)
* TEXSIZES, overrides R: Configuration file commands.
- (line 144)
+ (line 151)
* text in figures, chopped off: EPSF clipping. (line 6)
* tfm files: Metric files. (line 31)
* TFMFONTS, overrides T: Configuration file commands.
- (line 161)
+ (line 168)
* tftopl: Metric files. (line 39)
* Theisen, Tim: Ghostscript installation.
(line 17)
@@ -4655,148 +4557,145 @@ Index
* too-small output: Small or inverted. (line 6)
* trademark character, accessing: Changing PostScript encodings.
(line 18)
-* trailing spaces, dropped: Hypertext caveats. (line 55)
-* TranScript: Option details. (line 198)
+* trailing spaces, dropped: Hypertext caveats. (line 54)
+* TranScript: Option details. (line 203)
* transforming downloaded fonts: psfonts.map. (line 19)
* trouble: Diagnosing problems. (line 6)
* Type 1 fonts: Glyph files. (line 25)
* typesetting in PostScript: PostScript typesetting.
(line 6)
* U config command (Xerox 4045): Configuration file commands.
- (line 166)
+ (line 173)
* uncollated copies: Option details. (line 41)
* uncompressing PostScript: Dynamic creation of graphics.
(line 6)
* uniform resource locator: Hypertext specials. (line 20)
-* unknown, paper format for -t <1>: Config file paper sizes.
+* unknown, paper format for '-t': papersize special. (line 29)
+* unknown, paper format for '-t' <1>: Config file paper sizes.
(line 69)
-* unknown, paper format for -t: papersize special. (line 29)
* URL, definition: Hypertext specials. (line 27)
* URL, extended for TeX: Hypertext specials. (line 20)
-* urx (psfile special option): psfile special. (line 42)
-* ury (psfile special option): psfile special. (line 42)
+* urx ('psfile' special option): psfile special. (line 42)
+* ury ('psfile' special option): psfile special. (line 42)
* usage, basic: Basic usage. (line 6)
* user-definable colors: User-definable colors.
(line 6)
* userdict, and dictionary files: Header files. (line 21)
* userdict, used for header files: Option details. (line 122)
* V config command (vf path): Configuration file commands.
- (line 170)
+ (line 177)
* verbose EPSF processing: EPSF macros. (line 46)
* vf files: Virtual fonts. (line 16)
-* virtual font expansion: Virtual fonts. (line 34)
+* virtual font expansion: Virtual fonts. (line 33)
* virtual font path: Configuration file commands.
- (line 170)
+ (line 177)
* virtual fonts: Virtual fonts. (line 6)
* virtual fonts, creating: Invoking afm2tfm. (line 13)
* VM exhausted: Printer errors. (line 14)
* VMusage: Headers and memory usage.
(line 12)
-* voffset (psfile special option): psfile special. (line 21)
+* voffset ('psfile' special option): psfile special. (line 21)
* vpl files: Virtual fonts. (line 16)
* vptovf: Making a font available.
(line 52)
-* vscale (psfile special option): psfile special. (line 33)
-* vsize (psfile special option): psfile special. (line 27)
+* vscale ('psfile' special option): psfile special. (line 33)
+* vsize ('psfile' special option): psfile special. (line 27)
* W config command (warning): Configuration file commands.
- (line 175)
+ (line 182)
* warning messages, defining: Configuration file commands.
- (line 175)
-* warnings, suppressing: Option details. (line 296)
+ (line 182)
+* warnings, suppressing: Option details. (line 301)
* whole font downloading: psfonts.map. (line 60)
* wide fonts: psfonts.map. (line 19)
* X config command (horizontal resolution): Configuration file commands.
- (line 182)
-* Xerox 4045: Option details. (line 362)
+ (line 189)
+* Xerox 4045: Option details. (line 363)
* Y config command (vertical resolution): Configuration file commands.
- (line 185)
-* Y&Y fonts, installing: PostScript font installation.
- (line 19)
+ (line 192)
* Z config command (compression): Configuration file commands.
- (line 188)
+ (line 195)
* z config command (secure mode): Configuration file commands.
- (line 191)
-* | starting output filename: Option details. (line 233)
+ (line 198)

Tag Table:
-Node: Top559
-Node: Why Dvips1303
-Node: Installation4751
-Node: config.ps installation5772
-Node: PostScript font installation8396
-Node: Ghostscript installation11270
-Node: Diagnosing problems12367
-Node: Debug options13462
-Node: No output14488
-Node: Small or inverted15956
-Node: Printer errors16675
-Node: Long documents fail18007
-Node: Including graphics fails18348
-Node: Invoking Dvips19586
-Node: Basic usage20177
-Node: Command-line options21205
-Node: Option summary21654
-Node: Option details23850
-Node: Environment variables43214
-Node: Config files46173
-Node: Configuration file searching46856
-Node: Configuration file commands50156
-Node: Paper size and landscape57365
-Node: papersize special58963
-Node: Config file paper sizes60372
-Node: Paper trays64527
-Node: Interaction with PostScript65861
-Node: PostScript figures66514
-Node: Bounding box67240
-Node: \includegraphics70611
-Node: EPSF macros72902
-Node: EPSF scaling74872
-Node: EPSF clipping77442
-Node: psfile special78084
-Node: Dynamic creation of graphics80477
-Node: Fonts in figures81795
-Node: Header files83455
-Node: Including headers from TeX84661
-Node: Including headers from the command line86695
-Node: Headers and memory usage87795
-Node: Literal PS88505
-Node: " special89087
-Node: ps special89828
-Node: Literal headers91326
-Node: PostScript hooks92041
-Node: Literal examples94131
-Node: Hypertext95583
-Node: Hypertext caveats97141
-Node: Hypertext specials101538
-Node: PostScript fonts104172
-Node: Font concepts105288
-Node: Metric files106455
-Node: Glyph files109281
-Node: Virtual fonts111637
-Node: Encodings113527
-Node: PostScript typesetting115930
-Node: Making a font available119012
-Node: Invoking afm2tfm124042
-Node: Changing font encodings125012
-Node: Changing TeX encodings125802
-Node: Changing PostScript encodings126902
-Node: Changing both encodings128246
-Node: Reencoding with Afm2tfm128919
-Node: Encoding file format132023
-Node: Special font effects136226
-Node: Afm2tfm options138489
-Node: psfonts.map141474
-Node: Color146206
-Node: Color macro files147250
-Node: User-definable colors150448
-Node: Color subtleties151723
-Node: Ted Turner153374
-Node: Color device configuration154599
-Node: Color support details157041
-Node: Color specifications157419
-Node: Color specials158822
-Node: Index160951
+Node: Top517
+Node: Why Dvips1263
+Node: Installation4711
+Node: config.ps installation5714
+Node: PostScript font installation8321
+Node: Ghostscript installation9241
+Node: Diagnosing problems10338
+Node: Debug options11429
+Node: No output12433
+Node: Small or inverted13899
+Node: Printer errors14617
+Node: Long documents fail15949
+Node: Including graphics fails16290
+Node: Invoking Dvips17529
+Node: Basic usage18151
+Node: Command-line options19155
+Node: Option summary19603
+Node: Option details21797
+Node: Environment variables41442
+Node: Config files44303
+Node: Configuration file searching44973
+Node: Configuration file commands48226
+Node: Paper size and landscape55883
+Node: papersize special57481
+Node: Config file paper sizes58890
+Node: Paper trays63046
+Node: Interaction with PostScript64380
+Node: PostScript figures65033
+Node: Bounding box65759
+Node: \includegraphics69131
+Node: EPSF macros71424
+Node: EPSF scaling73424
+Node: EPSF clipping75994
+Node: psfile special76636
+Node: Dynamic creation of graphics79028
+Node: Fonts in figures80346
+Node: Header files81996
+Node: Including headers from TeX83206
+Node: Including headers from the command line85244
+Node: Headers and memory usage86343
+Node: Literal PS87554
+Node: " special88136
+Node: ps special88877
+Node: Literal headers90375
+Node: PostScript hooks91084
+Node: Literal examples93180
+Node: Hypertext94634
+Node: Hypertext caveats96182
+Node: Hypertext specials100570
+Node: PostScript fonts103204
+Node: Font concepts104321
+Node: Metric files105488
+Node: Glyph files108268
+Node: Virtual fonts110627
+Node: Encodings112453
+Node: PostScript typesetting114856
+Node: Making a font available117941
+Node: Invoking afm2tfm122975
+Node: Changing font encodings123933
+Node: Changing TeX encodings124724
+Node: Changing PostScript encodings125826
+Node: Changing both encodings127170
+Node: Reencoding with Afm2tfm127844
+Node: Encoding file format130947
+Node: Special font effects135151
+Node: Afm2tfm options137411
+Node: psfonts.map140397
+Node: Color145127
+Node: Color macro files146171
+Node: User-definable colors149364
+Node: Color subtleties150640
+Node: Ted Turner152292
+Node: Color device configuration153517
+Node: Color support details155961
+Node: Color specifications156339
+Node: Color specials157743
+Node: Index159872

End Tag Table