pst-labo update as pstricks package, Herbert Voss 15 Aug 2006 14:54:53 +0200

git-svn-id: svn://tug.org/texlive/trunk@1969 c570f23f-e606-0410-a88d-b1316a301751

15 files changed, 3762 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/generic/pst-labo/Changes b/Master/texmf-dist/doc/generic/pst-labo/Changes
new file mode 100644
index 00000000000..05308f3f681
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/Changes
@@ -0,0 +1,11 @@
+pst-labo.tex -----------------------------------
+2.03  2006-08-16  fix typo with middle (hv)
+2.02  2005-10-08  new option glassType (hv)
+2.01  2005-03-13  fix bug with pstcol loaded (HV)
+
+
+pst-laboObj.tex --------------------------------
+
+
+dcoumentation ----------------------------------
+pst-labo-docFR.tex|pdf  2005-10-23 
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/generic/pst-labo/README b/Master/texmf-dist/doc/generic/pst-labo/README
new file mode 100644
index 00000000000..3b80a99749e
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/README
@@ -0,0 +1,21 @@
+%% Package `pst-labo.tex'
+
+This version of pst-labo needs the xkeyval package. Get it
+from CTAN if it is not part of your local TeX installation.
+
+Save the files
+
+pst-labo.sty   
+pst-labo.tex
+pst-laboObj.tex
+
+in any place, where TeX/LaTeX or any other TeX program will find it.
+Pay attention, that you cannot run the documentation with
+pdflatex, PSTricks is PosTScript Tricks.
+Use latex->dvips->ps2pdf
+
+
+pst-labo-docDE.ltx   german main doc file (preamble)
+pst-labo-docDE.tex   german documentation source
+pstlabo8-tab1.tex    list of parameter
+pst-labo-doc.bib     bibtex file
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-doc.bib b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-doc.bib
new file mode 100644
index 00000000000..e217a66170f
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-doc.bib
@@ -0,0 +1,100 @@
+%% -*-bibtex-*-
+@STRING{bretter	= {Bretter, die die Welt bedeuten} }
+@STRING{dtk		= {{D}ie {\TeX}nische {K}om{\"o}die} }
+@STRING{PS		= {{P}ost{S}cript} }
+@String{j-TUGboat 	= "TUGboat"}
+
+@Book{PSTricks2,
+  author	= {Herbert Vo\ss},
+  title		= {{\PST} {G}rafik f\"ur \TeX{} und \LaTeX},
+  edition	= {second},
+  publisher	= {DANTE -- Lehmanns},
+  year		= {2005},
+  address	= {Heidelberg/Hamburg}
+}
+
+@Book{companion,
+  author	= {Frank Mittelbach and Michel Goosens et al},
+  title		= {The {\LaTeX} {G}raphics {C}ompanion},
+  edition	= {second},
+  publisher	= {Addison-Wesley Publishing Company},
+  year		= {2004},
+  address	= {Boston}
+}
+
+@Article{girou:01,
+  author	= {Denis Girou},
+  title		= {Pr\'esentation de {PST}ricks},
+  journal	= {Cahier GUTenberg},
+  year		= 1994,
+  volume	= {16},
+  month		= apr,
+  pages		= {21-70}
+}
+
+@Article{girou:02,
+  author	= {Timothy Van Zandt and Denis Girou},
+  title		= {Inside PSTricks},
+  journal	= {TUGboat},
+  year		= {1994},
+  volume	= {15},
+  month		= sep,
+  pages		= {239-246}
+}
+
+@Manual{pstricks,
+  Title          = {{PST}ricks - {\PS} macros for {G}eneric \TeX},
+  Author         = {Timothy {V}an Zandt},
+  Organization   = {},
+  Address        = {\url{http://www.tug.org/application/PSTricks}},
+  Note           = {},
+  year           = 1993,
+}
+
+@Manual{pst-code,
+  Title          = {{PST}ricks - {\PS} macros for {G}eneric \TeX, {D}ocumented {Code}},
+  Author         = {Timothy {V}an Zandt},
+  Organization   = {},
+  Address        = {\url{CTAN:/graphics/pstricks/obsolete/doc/src/pst-code.tex}},
+  Note           = {},
+  year           = 1997,
+}
+
+@Article{rahtz:96-1,
+  author	= {Sebastian Rahtz},
+  title		= {An introduction to {PST}ricks, part {I}},
+  journal	= {Baskerville},
+  address       = {\url{CTAN: /usergrps/uktug/baskervi/}},
+  year		= 1996,
+  volume	= 6,
+  number	= 1,
+  month		= feb,
+  pages		= {22-34}
+}
+@Article{rahtz:96-2,
+  author	= {Sebastian Rahtz},
+  title		= {An introduction to {PST}ricks, part {II}},
+  journal	= {Baskerville},
+  address       = {\url{CTAN: /usergrps/uktug/baskervi/}},
+  year		= 1996,
+  volume	= 6,
+  number	= 2,
+  month		= apr,
+  pages		= {23-33}
+}
+
+@misc{LGC,
+   author    = {Sebastian Rahtz},
+   title     = {Most of the PSTricks examples of
+                The \LaTeX{} Graphics Companion},
+   howpublished = {CTAN:~\url{graphics/pstricks/doc/lgc/}}
+}  
+
+@Manual{pst-labo,
+  Title          = {\texttt{pst-labo} -- a {PST}ricks package for chemical Objects},
+  Author         = {Denis Girou and Christoph Jorssen and Manuel Luque and Herbert Vo\ss},
+  Organization   = {},
+  Address        = {\url{CTAN: /graphics/pstricks/contrib/pst-labo/}},
+  Note           = {},
+  year           = 2005,
+}
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.ltx b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.ltx
new file mode 100644
index 00000000000..1f675cb7980
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.ltx
@@ -0,0 +1,223 @@
+\documentclass[11pt,a4paper,ngerman]{article}
+\usepackage[latin1]{inputenc}%
+\usepackage[T1]{fontenc}
+\usepackage{babel}
+\usepackage{lmodern}
+\usepackage{enumerate,longtable,url}
+\let\OldUrl=\url
+\renewcommand\url[1]{\protect\OldUrl{#1}}
+
+\usepackage[scaled]{luximono}
+%
+\usepackage{xspace,nonfloat}
+\usepackage[bottom]{footmisc}
+%
+\usepackage{tabularx}
+\usepackage{longtable}
+\usepackage{ltxtable}
+\usepackage{varioref}
+\usepackage[NewCommands,NewParameters]{ragged2e}
+\usepackage{url}
+\def\UrlFont{\ttfamily}
+\makeatletter
+%\def\verbatim@font{\small\normalfont\ttfamily}
+%
+\usepackage[dvipsnames,prologue,table]{pstricks}
+\colorlet{tableheadcolor}{gray!25}
+\colorlet{tablerowcolor}{gray!12}
+\newcommand\XCBox[1]{\fcolorbox{black}{#1}{\phantom{aa}} \small #1}
+\usepackage{pst-labo}
+\let\PSTfileversion\fileversion
+\SpecialCoor
+\psset{griddots=10,subgriddiv=0,gridlabels=7pt}
+%
+\definecolor{hellgelb}{rgb}{1,1,0.8}
+\definecolor{shadecolor}{rgb}{0.9,0.9,0.9}
+\definecolor{sphgrau}{rgb}{0.40,0.40,0.40}
+%
+% ------------------------------- Namen Abkuerungen ----------------------
+\newcommand{\La}%
+   {L\kern-.36em
+        {\setbox0\hbox{T}%
+         \vbox to\ht0{\hbox{$\m@th$%
+                \csname S@\f@size\endcsname
+                \fontsize\sf@size\z@
+                \math@fontsfalse\selectfont
+                A}%
+            \vss}%
+        }}
+\def\AllTeX{(\La\kern-.075em)\kern-.075em\TeX\xspace}
+\def\AMS{American Mathematical Society\xspace}
+\def\AmS{$\mathcal{A}$\kern-.1667em\lower.5ex\hbox
+    {$\mathcal{M}$}\kern-.125em$\mathcal{S}$}
+\def\AmSLaTeX{\AmS-\LaTeX\xspace}
+\let\latex\LaTeX
+\let\tex\TeX
+%
+\def\BibTeX{\textsc{Bib}\kern-.08em\TeX\index{BiBTeX@Bib\TeX}}
+\def\PT{Plain \TeX\index{Plain TeX@Plain \TeX}\xspace}
+\def\PST{{\texttt{PSTricks}}\xspace}
+\def\CTAN{{\texttt{CTAN}}\index{CTAN}\xspace}
+\def\PDF{{\texttt{PDF}}\xspace}
+\def\pst{{\texttt{pstricks}}\xspace}
+\def\PS{PostScript\xspace}
+\def\CT{Con\TeX t\index{ConTeXt@Con\TeX t}\xspace}
+\def\GS{Ghostscript\index{Ghostscript}\xspace}
+\def\GeX{G\kern-.1667em\lower.5ex\hbox{E}\kern-.125emX\@}
+\def\at{\char064}
+\def\VTeX{\texttt{V\TeX}\index{VTeX@\texttt{V\protect\TeX}}}
+\newcommand*\CMD[1]{{\texttt{\textbackslash #1}}}
+\newcommand\Paket[1]{\texttt{#1}}
+\providecommand\Programm[1]{\textsf{#1}}
+\providecommand\RaggedRight{\raggedright}
+%
+\def\Index#1{\index{#1}#1}
+\index{Environment|see{Umgebung}}
+\def\eIndex#1{\index{Umgebung!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\tIndex#1{\index{#1@\texttt{#1}}}
+\def\cIndex#1{\index{#1@\protect\CMD{#1}}}
+\def\pIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\ppIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}}
+\def\sIndex#1{\index{Syntax@\textbf{Syntax}!\protect\CMD{#1}}}
+\def\csIndex#1{\sIndex{#1}\cIndex{#1}}
+\def\PIndex#1{\index{Paket@\textbf{Paket}!\texttt{#1}}}
+\def\mIndex#1{\texttt{#1}\tIndex{#1}\pIndex{#1}}
+\def\aref#1{$\rightarrow$\vref{#1}}
+\def\PSindex#1{\index{PostScript!#1}}
+\def\Makroindex#1{\index{Makro!#1@\protect\CMD{#1}}}
+\def\Optindex#1{\index{Parameter@\textbf{Parameter}!\texttt{#1}}}
+\def\ttindex#1{\index{#1@\texttt{#1}}}
+\def\vert{\ensuremath{|}}
+%
+\let\Olddegrees\textdegrees
+\def\textdegrees{\ensuremath{\mbox{\Olddegrees}}}
+\def\sa{\ensuremath{\sphericalangle}\xspace}% needs amssymb
+%
+%
+%%-------------------------------- danger ---------------------------------------------
+\usepackage{manfnt}
+\usepackage{lettrine}
+\newsavebox{\dBox}
+
+\newenvironment{dangerPar*}
+{\gdef\dangerSym{\dbend\,\dbend}\@dangerPar}
+{\end@dangerPar}
+
+\newenvironment{dangerPar}
+{\gdef\dangerSym{\dbend\phantom{\,\dbend}}\@dangerPar}
+{\end@dangerPar}
+
+\def\@dangerPar{%
+  \begin{lrbox}{\dBox}
+    \minipage[c]{\linewidth-\widthof{\dangerSym}-\columnsep}%
+}
+\def\end@dangerPar{%
+    \endminipage
+  \end{lrbox}%
+  \trivlist\item\relax
+    \noindent
+    \minipage[c]{\widthof{\dangerSym}}
+      \raisebox{\height}[.9\height][.1\height]{\dangerSym}% ???
+    \endminipage
+    \hfill
+    \minipage[c]{\wd\dBox}
+      \usebox{\dBox}
+    \endminipage%
+  \endtrivlist
+}
+\newsavebox{\bombbox}
+\sbox\bombbox{%
+  \psset{unit=.55ex}%
+  \begin{pspicture}(-4,-4)(4,4)
+    \pscircle[fillcolor=gray,fillstyle=solid]{4}
+    \rput{45}{\psscaleboxto(6,0){\textsf{\textbf{PS}}}}
+    \psellipse*(0,3.8)(1,.2)
+    \psellipse*(0,5.5)(1,.2)
+    \psframe*(-1,3.8)(1,5.5)
+    \psbezier(0,5.5)(0,7)(1,8)(3.5,8)
+    \multido{\r=-0+40}{9}{\rput{\r}(3.5,8){\psline(0,0)(.4,0)}}
+  \end{pspicture}}
+
+\newcommand\danger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{{\small\dbend}}}
+  
+\newcommand\ddanger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{%
+    {\small\dbend\,\dbend}}}
+    
+\newcommand\DANGER{%    
+  \lettrine[lines=3,lraise=0.01,lhang=0,nindent=0pt,findent=.75em]{%
+    \usebox\bombbox}}
+%%------------------------------- Rest ------------------------------------------
+\pretolerance=500
+\tolerance=1000 
+\hbadness=3000
+\vbadness=3000
+\hyphenpenalty=400
+
+%-------------------------------- Listings -------------------------------------
+\usepackage{showexpl}% not a real PSTricks package
+%
+\renewcommand{\ttdefault}{ul9}% Luxi Mono
+%\lstset{language=PSTricks,keywordstyle=\small\fontfamily{ul9}\bfseries} 
+\lstset{wide=true} 
+%
+%-------------------------------- Allgemein -------------------------------------
+%\addtolength\belowcaptionskip{-10pt}
+%
+\providecommand\dante{DANTE \eV}
+\providecommand\eV{e.V\kern-.18em\@ifnextchar.{}{.}}
+\def\textat{\protect\makeatletter\texttt{@}\protect\makeatother}
+
+\def\lBrace{\texttt{\{}}
+\def\rBrace{\texttt{\}}}
+\def\lBracket{\texttt{[}}
+\def\rBracket{\texttt{]}}
+%
+\newcounter{SX@refC}% for texlive8
+\def\PSTemph#1{\textit{\texttt{#1}}}
+%
+\def\LPack#1{\texttt{#1}\PIndex{#1}}
+\def\Lmenv#1{\texttt{#1}\eIndex{#1}}
+\def\Lmcs#1{\CMD{#1}\Makroindex{#1}\cIndex{#1}}
+\let\xLcs\Lmcs
+\let\Lcs\CMD
+\let\Lit\texttt
+\def\Loption#1{\texttt{#1}\Optindex{#1}\ttindex{#1}}
+\def\LProg#1{\texttt{#1}\pIndex{#1}}
+\let\Prog\LProg
+\def\LFile#1{\texttt{#1}\tIndex{#1}}
+\def\LColor#1{\texttt{#1}\index{Farbe!#1@\texttt{#1}}}
+\def\Lindex#1{#1\index{#1}}% Ausgeben und in den Index
+\def\Lext#1{\texttt{#1}\index{Dateiendung!#1@\texttt{#1}}}
+\def\LClass#1{\texttt{#1}}
+\def\Lmnotation#1{\texttt{#1}\tIndex{#1}}
+\newcommand\Larga{}
+\DeclareRobustCommand\Larga[1]{$\langle$\PSTemph{#1}$\rangle$}
+\newcommand\LargA{}
+\DeclareRobustCommand\LargA[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largs{}
+\DeclareRobustCommand\Largs[1]{\lBracket$\langle$\PSTemph{#1}$\rangle$\rBracket}
+\newcommand\Largb{}
+\DeclareRobustCommand\Largb[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largr{}
+\DeclareRobustCommand\Largr[1]{\PSTemph{({#1})}}
+\DeclareRobustCommand\Largra[1]{(\Larga{#1})}
+\newcommand\Larg{}
+\DeclareRobustCommand\Larg[1]{\lBrace\texttt{#1}\rBrace}
+\def\begEnv#1{\CMD{begin\{#1\}}\tIndex{#1}}
+\def\endEnv#1{\CMD{end\{#1\}}}
+\def\OptArg{\Largs{Optionen}}
+\def\Largrao{($\langle x_0,y_0\rangle$)}
+\def\Largrai{($\langle x_1,y_1\rangle$)}
+\def\Largraii{($\langle x_2,y_2\rangle$)}
+\def\Largraiii{($\langle x_3,y_3\rangle$)}
+\def\Largran{($\langle x_n,y_n\rangle$)}
+%
+\input random
+%
+\begin{document}
+
+\input{pst-labo-docDE}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.pdf b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.pdf
new file mode 100644
index 00000000000..c19d650e1cc
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.pdf
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.tex b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.tex
new file mode 100644
index 00000000000..b7f37fa750e
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docDE.tex
@@ -0,0 +1,926 @@
+\title{\texttt{PST-Labo} - chemical objects\\
+\footnotesize{version \PSTfileversion}}
+\author{%
+Denis Girou\thanks{\url{Denis.Girou@idris.fr}}, 
+Christophe Jorssen\thanks{\url{Christophe.Jorssen@wanadoo.fr}},
+Manuel Luque\thanks{\url{Mluque5130@aol.com}} and
+Herbert Vo\ss\thanks{\url{voss@pstricks.de}}}
+\date{\today}
+\maketitle
+
+\begin{abstract}
+\texttt{pst-labo} stellt Makros für vielfältige Geräte bereit, wie sie im Bereich
+der Chemie Anwendung finden.\cite{pst-labo} Da diese sehr oft eine standardisierte Form haben,
+erspart die Anwendung von \texttt{pst-labo} das manuelle Erstellen bestimmter
+technischer Geräte. Neben dem Paket \texttt{pst-osci} wird hier außerdem gezeigt,
+wie sogenannte "`high level"'-Objekte mit \PST erstellt werden können.\cite{PSTricks2} 
+Sämtliche Basisobjekte sind in der
+Datei \LFile{pst-laboObj.tex} gespeichert und werden beim Start von \texttt{pst-labo}
+eingelesen. Diese können ohne weiteres für eigene Erweiterungen verwendet werden.
+Eine Zusammenstellung findet man im Abschnitt~\ref{sec:pstlabo:Objects}.
+\end{abstract}
+
+\tableofcontents
+
+\newpage
+% ---------------------------------------------------------------------------------------
+\section{Parameter}\label{sec:pstlabo8:Parameter}
+% ---------------------------------------------------------------------------------------
+Tabelle~\ref{tab:pst-labo:Parameter} zeigt eine Zusammenstellung der speziellen, für 
+\LPack{pst-labo} geltenden Parameter.
+
+
+\noindent
+\LTXtable{\linewidth}{pstlabo8-tab1-DE.tex}%
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{glassType}}\label{subsec-pstlabo-glassType}
+% ---------------------------------------------------------------------------------------
+\Loption{glassType} bezeichnet die Art des Glasgefäßes, wobei das normale Reagenzglas der
+Standard ist.
+
+\bgroup
+\begin{LTXexample}[preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{bouchon}}\label{subsec-pstlabo-bouchon}
+% ---------------------------------------------------------------------------------------
+Mit der \Loption{bouchon}-Option kann man die Gefäße mit einem Korken beziehungsweise Stöpsel
+versehen.
+
+\bgroup
+\begin{LTXexample}[width=0.575\linewidth,preset=\raggedright]
+\psset{unit=0.45cm}
+\psset{bouchon=true}
+\pstTubeEssais[glassType=tube]
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=flacon]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{pince}}\label{subsec-pstlabo-pince}
+% ---------------------------------------------------------------------------------------
+Mit der \Loption{pince}-Option kann man die Gefäße mit einer der üblichen Holzklammern
+versehen.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{bouchon=true,pince=true}
+\pstTubeEssais[glassType=tube]\hspace{1cm}
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeDroit}}\label{subsec-pstlabo-tubeDroit}
+% ---------------------------------------------------------------------------------------
+Mit der \Loption{tubeDroit}-Option kann man die Gefäße mit einem Glasröhrchen versehen,
+was nur in der Kombination mit der Option \verb+bouchon=true+ Sinn macht, weshalb diese
+auch intern gleich auf diesen Wert gesetzt wird. Zu beachten ist noch, dass für das
+Glasröhrchen kein vertikaler Platz berücksichtigt wird, sodass der Anwender selbst
+dafür sorgen muss, beispielsweise mit \verb+\rule{0pt}{4cm}+.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeDroit=true}
+\rule{0pt}{4cm}%
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoude}}\label{subsec-pstlabo-tubeCoude}
+% ---------------------------------------------------------------------------------------
+Die \Loption{tubeCoude}-Option ist faktisch identisch zur vorhergehenden, nur dass
+ein rechtwinklig abknickendes Glasröhrchen eingezeichnet wird.  Dadurch ist auch der
+benötigte zusätzliche vertikale Platz weitaus geringer.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoude=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+    
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeU}}\label{subsec-pstlabo-tubeCoudeU}
+% ---------------------------------------------------------------------------------------
+Die \Loption{tubeCoudeU}-Option ist faktisch identisch zur vorhergehenden, nur dass
+ein rechtwinklig abknickendes Glasröhrchen eingezeichnet wird.  Dadurch ist auch der
+benötigte zusätzliche vertikale Platz weitaus geringer.
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoudeU=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=ballon]
+\end{LTXexample}
+\egroup
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeUB}}\label{subsec-pstlabo-tubeCoudeUB}
+% ---------------------------------------------------------------------------------------
+Die \Loption{tubeCoudeUB}-Option ist eine Erweiterung der U-Variante und nur dort
+anwendbar, wo eine Verlängerung des Glasröhrchens bis zum Boden sinn macht, wie
+beispielsweise beim Makro \Lmcs{pstChauffageBallon}.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=ballon}
+\pstChauffageBallon[tubeCoudeU] \pstChauffageBallon[tubeCoudeUB]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{etiquette} und \texttt{Numero}}\label{subsec-pstlabo-etiquette}
+% ---------------------------------------------------------------------------------------
+Die \Loption{etiquette}-Option ist der Schalter, um mit der Option \Loption{Numero}
+definierte Label darzustellen.
+
+
+\bgroup
+\begin{LTXexample}[width=0.42\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[etiquette]
+\pstTubeEssais[etiquette,Numero=1]
+\pstTubeEssais[glassType=flacon,bouchon,%
+  etiquette,Numero={\small Cu$^{2+}$}]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubePenche}}\label{subsec-pstlabo-tubePenche}
+% ---------------------------------------------------------------------------------------
+Die \Loption{tubePenche}-Option ermöglicht die Anordnung der chemischen Geräte in 
+nahezu beliebiger Winkellage, wobei der Flüssigkeitsspiegel jeweils in der Horizontalen
+bleibt. Die Winkelwerte müssen aus dem Intervall $-65\ldots +65$ sein.
+
+\bgroup
+\begin{LTXexample}[width=0.4\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[tubeDroit=true,tubePenche=40]
+\pstTubeEssais[tubePenche=-20,bouchon]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeSeul}}\label{subsec-pstlabo-tubeSeul}
+% ---------------------------------------------------------------------------------------
+\Loption{tubeSeul} hat einen Einfluss auf die gewählte Boxgröße. Dies kann vorteilhaft sein,
+wenn man wie im folgenden Beispiel durch die Anwendung von \Lmcs{psframebox} zu sehen ist, 
+kein weiteres Gefäß anordnen will. Ohne \verb+tubeSeul=true+ hätte die rechte Box dieselbe Größe
+wie die standardmäßig vorgegeben linke Box. Die Option
+hat nur Auswirkungen beim Makro \Lmcs{pstChauffageTube} und den Glastypen \verb+ballon+ und
+\verb+tube+.
+
+
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=ballon,becBunsen}
+\psframebox{\pstChauffageTube[becBunsen,barbotage]}
+\psframebox{\pstChauffageTube[tubeSeul=true]}
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{becBunsen}}\label{subsec-pstlabo-becBunsen}
+% ---------------------------------------------------------------------------------------
+\Loption{becBunsen} ist für das Makro \Lmcs{pstChauffeTube} standardmäßig auf \verb+true+ 
+und für das Makro \Lmcs{pstChauffageBallon} standardmäßig auf \verb+false+ gesetzt und
+aktiviert beziehungsweise deaktiviert das Zeichnen des \Index{Bunsenbrenner}s.
+
+
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth]
+\psset{unit=0.5cm,tubeSeul=true}
+\pstChauffageTube 
+\pstChauffageTube[becBunsen=false]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{barbotage}}\label{subsec-pstlabo-barbotage}
+% ---------------------------------------------------------------------------------------
+Die Option \Loption{barbotage} erstellt ein zusätzliches Reagenzglas, welches durch
+ein Glasröhrchen mit dem eigentlichen Gefäß verbunden ist. Um den notwendigen Platz
+für die Grafik zur Verfügung zu stellen, sollte die Option \Loption{tubeSeul} nicht
+aktiviert sein (vgl. Abschnitt~\vref{subsec-pstlabo-tubeSeul}).
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstChauffageTube[tubeSeul=true] 
+\pstChauffageTube[barbotage]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{substance}}\label{subsec-pstlabo-substance}
+% ---------------------------------------------------------------------------------------
+Mit der Option \Loption{substance} kann die Art der Substanz in den Gefäßen
+vorgegeben werden. Die Standardvorgabe ist eine blaue Flüssigkeit (\Lmcs{pstBullesChampagne}). 
+Zur Auswahl stehen die in Tabelle~\ref{tab-pstlabo-substance} zusammengestellten Makros. Zu beachten
+ist, dass es sich bei \Lmcs{pstFilaments} und \Lmcs{pstBULLES} um einen verpflichtenden
+Farb-Parameter handelt. 
+
+\begin{table}[!htb]
+\caption{Zusammenstellung der Makros für die Option \Loption{substance}}\label{tab-pstlabo-substance}
+\centering
+\begin{tabular}{@{}lcl@{}}
+\emph{Makroname} & \emph{Vorgabe} & \emph{Anmerkungen}\\\hline
+\Lmcs{pstBullesChampagne}\Largs{Wert} & 25 & Standard\\
+\Lmcs{pstFilaments}\Largs{Wert}\Largb{Farbe} & 5\\ 
+\Lmcs{pstBilles}\Largs{Wert} & 50 & zweidimensional\\
+\Lmcs{pstBULLES}\Largs{Wert}\Largb{Farbe} & 20 & dreidimensional
+\end{tabular}
+\end{table}
+
+Der optionale Wert stellt die Anzahl der Durchläufe für die interne \Lmcs{multido}-Schleife dar und
+ist prinzipiell nicht beschränkt, kann aber dennoch bei Werten größer als $80$ zu Problemen mit
+dem definierten Speicherplatz von \TeX\ führen. Dieser kann durch Modifikation der \TeX-Konfigurationsdatei
+erhöht werden. Das Verzeichnis der Knfigurationsdatei lässt sich mithilfe von \verb+kpsewhich texmf.cnf+ 
+ermitteln:
+\begin{lstlisting}[language=sh]
+voss@shania:~> kpsewhich texmf.cnf
+/usr/local/texlive/2005/texmf/web2c/texmf.cnf
+\end{lstlisting}
+
+
+Das erste Beispiel zeigt die standardmäßigen Vorgaben, wobei die beiden Farben willkürlich gewählt 
+wurden. Das zweite Beispiel zeigt die Anwendung des optionalen Parameters.  Grundsätzlich können
+die möglichen Makros für \Loption{substance} und \Loption{solide} beliebig gemischt und auch untereinander
+vertauscht werden.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[substance=\pstBullesChampagne] 
+\pstTubeEssais[substance=\pstFilaments{red}]
+\pstTubeEssais[substance=\pstBilles]
+\pstTubeEssais[substance=\pstBULLES{white}]
+\end{LTXexample}
+\egroup  
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[substance={\pstBullesChampagne[80]}] 
+\pstTubeEssais[substance={\pstFilaments[20]{black}}]
+\pstTubeEssais[substance={\pstBilles[80]}]
+\pstTubeEssais[substance={\pstBULLES[20]{white}}]
+\end{LTXexample}
+\egroup  
+
+Bei Verwendung des optionalen Parameters für die Schleifenzahl ist zu beachten, dass 
+dieser selbst Teil eines anderen optionalen Parameters ist und somit in geschweifte
+Klammern zu setzen ist, wie in obigen Beispiel deutlich zu sehen ist. 
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{solide}}\label{subsec-pstlabo-solide}
+% ---------------------------------------------------------------------------------------
+Mit der Option \Loption{solide} kann die Art der Substanz in den Gefäßen
+vorgegeben werden. Tabelle~\ref{tab-pstlabo-solide} zeigt eine Zusammenstellung
+der verfügbaren Werte. Grundsätzlich gilt hier das bereits im Abschnitt~\ref{subsec-pstlabo-substance}
+Gesagte, so dass hier auf eine Wiederholung verzichtet werden kann.
+
+\begin{table}[!htb]
+\caption{Zusammenstellung der Makros für die Option \Loption{substance}}\label{tab-pstlabo-solide}
+\centering
+\begin{tabular}{@{}lc@{}}
+\emph{Makroname} & \emph{Vorgabe} \\\hline
+\Lmcs{pstTournureCuivre}\Largs{Wert} & 30 \\
+\Lmcs{pstClouFer}\Largs{Wert} & 60\\ 
+\Lmcs{pstGrenailleZinc}\Largs{Wert} & 25 
+\end{tabular}
+\end{table}
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[solide=\pstTournureCuivre] 
+\pstTubeEssais[solide=\pstClouFer]
+\pstTubeEssais[solide=\pstGrenailleZinc]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[solide={\pstTournureCuivre[50]}] 
+\pstTubeEssais[solide={\pstGrenailleZinc[80]}]
+\pstTubeEssais[glassType=ballon,solide={\pstClouFer[50]}]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbe}}\label{subsec-pstlabo-tubeRecourbe}
+% ---------------------------------------------------------------------------------------
+
+Die Option \Loption{tubeRecourbe} erstellt eine Anordnung zum Sammeln des aus dem Glasgefäß
+entwichenden Gases, wobei es sich hier um die Langversion mit Bunsenbrenner handelt.
+
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=erlen,recuperationGaz,substance=\pstTournureCuivre}
+\pstChauffageBallon
+\pstChauffageBallon[tubeRecourbe]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbeCourt}}\label{subsec-pstlabo-tubeRecourbeCourt}
+% ---------------------------------------------------------------------------------------
+
+Die Option \Loption{tubeRecourbeCourt} entspricht prinzipiell der vorhergehenden, nur das
+hier sie "`Kurzversion"' ohne Bunsenbrenner dargestellt wird.
+
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=flacon,recuperationGaz,substance=\pstFilaments{red}}
+\pstChauffageBallon[tubeRecourbe]
+\pstChauffageBallon[tubeRecourbeCourt]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{doubletube}}\label{subsec-pstlabo-doubletube}
+% ---------------------------------------------------------------------------------------
+\Loption{doubletube} ermöglicht die Anordnung zweier Glasröhrchen, wobei das eine mit
+einem Regler versehen ist.
+
+\bgroup
+\begin{LTXexample}[width=0.6\linewidth]
+\rule{0pt}{4cm}
+\psset{unit=0.5cm,glassType=ballon,%
+  substance=\pstClouFer}
+\pstBallon
+\pstBallon[doubletube]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{refrigerantBoulle}}\label{subsec-pstlabo-refrigerantBoulle}
+% ---------------------------------------------------------------------------------------
+\Loption{refrigerantBoulle} ist eine der Optionen, die die Ausgabe einer komplexen Apparatur 
+ermöglichen. Zu beachten ist hierbei, dass der geometrische Mittelpunkt in der Mitte der Anordnung
+liegt. Was allerdings nur von Bedeutung ist, wenn weitere Dinge angeordnet werden sollen.
+
+\bgroup
+\begin{LTXexample}[width=0.3\linewidth]
+\psset{unit=0.5cm}
+\pstBallon[refrigerantBoulles,glassType=ballon,%
+  substance=\pstClouFer]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{recuperationGaz}}\label{subsec-pstlabo-recuperationGaz}
+% ---------------------------------------------------------------------------------------
+\Loption{recuperationGaz} bezeichnet die bereits mehrfach angegebene Anordnung zum
+Auffangen sich ausdehnender Gase.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=flacon,tubeRecourbe,substance={\pstFilaments[10]{red}}}
+\pstChauffageBallon
+\pstChauffageBallon[recuperationGaz]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{burette}}\label{subsec-pstlabo-burette}
+% ---------------------------------------------------------------------------------------
+Standardmäßig ist für das Makro \Lmcs{pstDosage} die Darstellung einer Bürette vorgesehen.
+Mit der Option \Loption{burette} kann dies unterbunden werden.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm}
+\pstDosage[glassType=erlen]
+\pstDosage[glassType=erlen,burette=false]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauReactifBurette} und \texttt{couleurReactifBurette}}\label{subsec-pstlabo-niveauReactifBurette}
+% ---------------------------------------------------------------------------------------
+\Loption{niveauReactifBurette} und \Loption{couleurReactifBurette} kennzeichnen Flüssigkeitsstand 
+in Prozent und die Farbe der chemischen Reaktion in einer Bürette.
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\egroup  
+\end{center}
+\begin{lstlisting}
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{AspectMelange} und \texttt{CouleurDistillat}}\label{subsec-pstlabo-AspectMelange}
+% ---------------------------------------------------------------------------------------
+\Loption{AspectMelange} bezeichnet die Farbe der chemischen Substanz und muss einem 
+definierten Stil entsprechen, so dass auch Farbgradienten möglich sind. Dagegen
+ist \Loption{CouleurDistillat} als reine Farbe für das Destillat definiert.
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\egroup  
+\end{center}
+
+\begin{lstlisting}
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{phmetre}}\label{subsec-pstlabo-phmetre}
+% ---------------------------------------------------------------------------------------
+\Loption{phmetre} aktiviert die Darstellung eines ph-Wert Messgerätes, welches allerdings 
+nur für das Makro \Lmcs{pstDosage} zur Verfügung steht.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher,burette=false}
+\pstDosage
+\pstDosage[phmetre]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{agitateurMagnetique}}\label{subsec-pstlabo-agitateurMagnetique}
+% ---------------------------------------------------------------------------------------
+\Loption{agitateurMagnetique} ist standardmäßig aktiviert und bezeichnet die Heizplatte.
+Bei Deaktivierung entfällt lediglich das EInzeichnen der Symbole, das Rechteck bleibt erhalten.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,burette=false,glassType=becher}
+\pstDosage
+\pstDosage[agitateurMagnetique=false]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauLiquide1}, \texttt{niveauLiquide2}, \texttt{niveauLiquide3}
+    und  \texttt{aspectLiquide1}, \texttt{aspectLiquide2}, \texttt{aspectLiquide3}}\label{subsec-pstlabo-niveauLiquide1}
+% ---------------------------------------------------------------------------------------
+  Diese sechs Optionen kennzeichen Höhe und Stil der jeweiligen
+  Flüssigkeiten 1, 2 und 3, wobei der Stil einer der vorgegebenen oder
+  ein neu definierter sein kann (siehe
+  Abschnitt~\ref{subsec-pstlabo-substance}.  Je nach verwendetem Makro
+  müssen dabei nicht immer alle Optionen möglich sein.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm,glassType=becher}
+\rule{0pt}{6cm}
+\pstDosage[niveauReactifBurette=18,niveauLiquide1=30,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=20,niveauLiquide1=40,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=false,agitateurMagnetique=false]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\makebox[\textwidth]{%
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+}
+\egroup  
+
+\begin{lstlisting}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+\end{lstlisting}
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Vordefinierte Farben und Stile}\label{sec:pstlabo8:Stile}
+% ---------------------------------------------------------------------------------------
+Die folgende Zusammenstellung zeigt die bereits mit dem Paket \LPack{pst-labo} vordefinierten
+Farben und Stile, die vom Anwender nach Belieben überschrieben werden können.
+
+
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\definecolor{Beige}         {rgb}{0.96,0.96,0.86}
+\definecolor{GrisClair}     {rgb}{0.8,0.8,0.8}
+\definecolor{GrisTresClair} {rgb}{0.9,0.9,0.9}
+\definecolor{OrangeTresPale}{cmyk}{0,0.1,0.3,0}
+\definecolor{OrangePale}    {cmyk}{0,0.2,0.4,0}
+\definecolor{BleuClair}     {cmyk}{0.2,0,0,0}
+\definecolor{LightBlue}     {rgb}{.68,.85,.9}
+\definecolor{Copper}        {cmyk}{0,0.9,0.9,0.2}
+\definecolor{Marron}        {cmyk}{0,0.3,0.5,.3}
+%
+\newpsstyle{aspectLiquide1}   {linestyle=none,fillstyle=solid,fillcolor=cyan}
+\newpsstyle{aspectLiquide2}   {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{aspectLiquide3}   {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Champagne}        {linestyle=none,fillstyle=solid,fillcolor=Beige}
+\newpsstyle{BilleThreeD}      {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradend=white,GradientCircle=true}
+\newpsstyle{Sang}             {linestyle=none,fillstyle=solid,fillcolor=red}
+\newpsstyle{Cobalt}           {linewidth=0.2,fillstyle=solid,fillcolor=blue}
+\newpsstyle{Huile}            {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{Vinaigre}         {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Diffusion}        {linestyle=none,fillstyle=gradient,gradmidpoint=0}
+\newpsstyle{DiffusionMelange2}{fillstyle=gradient,gradbegin=white,gradend=red,gradmidpoint=0,linecolor=red}
+\newpsstyle{flammeEtGrille}   {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradbegin=OrangePale,gradend=yellow}
+\newpsstyle{rayuresJaunes}    {fillstyle=hlines,linecolor=yellow,hatchcolor=yellow}
+\newpsstyle{DiffusionBleue}   {fillstyle=gradient,gradmidpoint=0,linestyle=none,gradbegin=green,gradend=cyan}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\section{Makros}\label{sec:pstlabo8:Makros}
+% ---------------------------------------------------------------------------------------
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstTubeEssais}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+Dieses Makro ist die einfachste Variante der chemischen Gefäße und ist auch schon 
+mehrfach in den vorgehenden Beispielen gezeigt worden. Die Standardvorgabe 
+ohne Parameter ist das normale Reagenzglas (\verb+glassType=tube+).
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5}
+\pstTubeEssais
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=erlen,niveauLiquide1=80]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=ballon,niveauLiquide1=20,aspectLiquide1=DiffusionBleue]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageTube}}\label{sec:pstlabo8:pstChauffageTube}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstChauffageTube} stellt eine Erweiterung des vorstehenden Makros dar, indem
+zusätzlich eine Heizplatte, einen Bunsenbrenner oder auch eine zweite Röhre
+erstellt werden.
+
+
+\begin{center}
+\bgroup
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstBallon}}\label{sec:pstlabo8:pstBallon}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstBallon} ist faktisch identisch zur Anwendung  \Lmcs{pstTubeEssais}, erlaubt jedoch
+weitere Optionen.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.3cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{0.5cm}{\pstBallon[refrigerantBoulles=true]}
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.25cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{1cm}{\pstBallon[refrigerantBoulles=true]}
+\end{lstlisting}
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageBallon}}\label{sec:pstlabo8:pstChauffageBallon}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstChauffageBallon} ist eine Erweiterung des vorhergehenden Makros und hat
+standardmäßig den Bunsenbrenner vorgesehen.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\end{lstlisting}
+
+
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]\hspace{3cm}
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]\hspace{.25cm}
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\end{lstlisting}
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEntonnoir}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstEntonnoir} als Trichter wird ohne Parameter automatisch im Zusammenhang mit
+dem Reagenzglas benutzt. Daneben sind alle anderen Kombinationen möglich und denkbar.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstEntonnoir
+\pstEntonnoir[glassType=becher,tubePenche=-20]
+\pstEntonnoir[glassType=flacon,etiquette=true,Numero={\green 37},%
+  aspectLiquide1=DiffusionBleue,niveauLiquide1=80]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEprouvette}}\label{sec:pstlabo8:pstEprouvette}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstEprouvette} stellt den allgemein bekannten Messbecher dar, dessen
+Größe über die \PST-Maßstabsfaktoren verändert werden kann.
+
+
+\bgroup
+\begin{LTXexample}
+\pstEprouvette[yunit=0.5cm]
+\pstEprouvette[unit=0.6cm,niveauLiquide1=100,niveauLiquide2=60,niveauLiquide3=30]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstpipette}}\label{sec:pstlabo8:pstpipette}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstpipette} stellt eine normale mit Maßstrichen versehene Pipette dar und
+kann ebenfalls über die \PST-Maßstabsfaktoren verändert werden.
+
+\bgroup
+\begin{LTXexample}
+\pstpipette[unit=0.5cm,tubePenche=40]
+\pstpipette[yunit=0.5cm]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDosage}}\label{sec:pstlabo8:pstDosage}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstDosage} wird in der Regel im Zusammnhang mit anderen Geräten angewendet werden.
+Die Bürette hat eine maximale Kapazität von 25 mL, wobei die aktuelle Höhe und die
+Art des chemischen Stoffes über Optionen veränderbar sind. Weiterhin sind optional
+ein PH-Messgerät oder eine Heizplatte wählbar, wobei ersteres nur mit dem Glastyp \verb+becher+
+zur Verfügung steht.
+
+
+\bgroup\noindent
+\makebox[\linewidth]{%
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\egroup  
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDistillation}}\label{sec:pstlabo8:pstDistillation}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstDistillation} erwartet als einziges Makro die Maße für die \Lmenv{pspicture}
+Umgebung.
+
+\medskip
+\noindent
+\Lmcs{pstDistillation}\\
+\Lmcs{pstDistillation}\Largr{$x_{ll},y_{ll}$}\Largr{$x_{ur},y_{ur}$} % $
+
+\medskip
+Bei fehlender Angabe der Koordinaten wird ein Rechteck der Größe $(-4,-10)(8,7)$
+angenommen, was davon ausgeht, dass noch weitere Objecte mithilfe der \Lmcs{rput}-Anweisung
+eingefügt werden sollen.
+
+\bgroup
+\begin{LTXexample}
+\psset{unit=0.5cm}
+\pstDistillation(-3,-10)(7,6)
+\end{LTXexample}
+\egroup  
+
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Basisobjekte}\label{sec:pstlabo:Objects}
+% ---------------------------------------------------------------------------------------
+Die Liste der möglichen Basisobjekte kann man der Datei \LFile{pst-laboObj.tex} entnehmen.
+Aus Platzgründen wird hier darauf verzichtet sie alle explizit anzugeben.
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Beispiele}\label{sec:pstlabo:Beispiele}
+% ---------------------------------------------------------------------------------------
+Das Erzeugen komplexer Beispiele wird erheblich vereinfacht, wenn man sich an einem
+mit \Lmcs{psgrid} erzeugten Koordinatengitter orientiert, wie dies bereits in 
+Abschnitt~\vref{sec:overlay:Ueberschreiben} im Zusammenhang mit Overlays gezeigt wurde.
+
+\begin{center}
+\bgroup
+\sffamily
+\begin{pspicture}(0,-4)(7,4)
+  \rput(3,0){\pstDosage[niveauReactifBurette=25,niveauLiquide1=30,%
+    aspectLiquide1=Champagne,glassType=becher,phmetre,unit=0.5]}
+  \rput(2,3){B\"urette}   
+  \rput(4.7,3.6){25 mL}
+  \rput(5.2,-2.2){H$_3$O$^+$+Cl$^-$}
+  \rput(.8,-3){PH-Messer} 
+  \rput(5,-2.8){20 mL}
+  \rput(5,1){Na$^+$+OH$^-$} \rput(6.4,-3.6){Heizplatte}
+  \psline{->}(2.7,2.9)(3.4,2.9)
+\end{pspicture}
+\begin{pspicture}(-3,-2)(2,3)
+  \psset{unit=0.5cm}
+  \rput(-4.5,4.0){\pstEprouvette[tubePenche=-60,niveauLiquide1=90,niveauLiquide2=50]}
+  \rput(.5,0){\pstEntonnoir[glassType=flacon,niveauLiquide1=30]}
+  \rput(.5,7.5){
+    \framebox{\begin{minipage}{3.2cm}Nach der Dekan\-ta\-tion
+    sind die einzelnen Phasen getrennt, das Leichteste sammelt man durch Filtrieren.
+    \end{minipage}}}
+\end{pspicture}
+\egroup
+\figcaption{Anwendung für \Lmcs{pstDosage}}
+
+
+\bigskip
+\bgroup
+\psset{unit=0.5cm,etiquette}
+\newpsstyle{Nickel}{fillstyle=solid,fillcolor=green}
+\pstTubeEssais[niveauLiquide1=20,aspectLiquide1=Champagne,Numero=1]\kern-20pt
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Cobalt,Numero=2]\kern-20pt
+\pstTubeEssais[niveauLiquide1=40,aspectLiquide1=Sang,Numero=3]\kern-20pt
+\pstTubeEssais[Numero=4]\kern-20pt
+\psset{bouchon,glassType=flacon}
+\pstTubeEssais[aspectLiquide1=Vinaigre,Numero={\footnotesize MnO$_4^-$}]
+\pstTubeEssais[aspectLiquide1=Huile,unit=0.75,Numero={\footnotesize Ce$^{4+}$}]
+\pstTubeEssais[aspectLiquide1=Nickel,Numero={\footnotesize Ni$^{2+}$}]
+\pstTubeEssais[Numero={\footnotesize Cu$^{2+}$}]
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Champagne,Numero={\footnotesize NaOH},unit=0.75]
+\egroup  
+\figcaption{Anwendung für \Lmcs{pstTubeEssais}}
+\end{center}
+
+\section*{Credits}
+Patrick Drechsler | Arnaud Schmittbuhl
+
+
+\nocite{*}
+\bibliographystyle{plain}
+\bibliography{pst-labo-doc}
+
+
+\endinput
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.ltx b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.ltx
new file mode 100644
index 00000000000..145a0f75fd6
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.ltx
@@ -0,0 +1,224 @@
+\documentclass[11pt,a4paper,english]{article}
+\usepackage[latin1]{inputenc}%
+\usepackage[T1]{fontenc}
+\usepackage{babel}
+\usepackage{lmodern}
+\usepackage{enumerate,longtable,url}
+\let\OldUrl=\url
+\renewcommand\url[1]{\protect\OldUrl{#1}}
+
+\usepackage[scaled]{luximono}
+%
+\usepackage{xspace,nonfloat}
+\usepackage[bottom]{footmisc}
+%
+\usepackage{tabularx}
+\usepackage{longtable}
+\usepackage{ltxtable}
+\usepackage{varioref}
+\usepackage[NewCommands,NewParameters]{ragged2e}
+\usepackage{url}
+\def\UrlFont{\ttfamily}
+\makeatletter
+%\def\verbatim@font{\small\normalfont\ttfamily}
+%
+\usepackage[dvipsnames,prologue,table]{pstricks}
+\colorlet{tableheadcolor}{gray!25}
+\colorlet{tablerowcolor}{gray!12}
+\newcommand\XCBox[1]{\fcolorbox{black}{#1}{\phantom{aa}} \small #1}
+\usepackage{pst-labo}
+\let\PSTfileversion\fileversion
+\SpecialCoor
+\psset{griddots=10,subgriddiv=0,gridlabels=7pt}
+%
+\definecolor{hellgelb}{rgb}{1,1,0.8}
+\definecolor{shadecolor}{rgb}{0.9,0.9,0.9}
+\definecolor{sphgrau}{rgb}{0.40,0.40,0.40}
+%
+% ------------------------------- Namen Abkuerungen ----------------------
+\newcommand{\La}%
+   {L\kern-.36em
+        {\setbox0\hbox{T}%
+         \vbox to\ht0{\hbox{$\m@th$%
+                \csname S@\f@size\endcsname
+                \fontsize\sf@size\z@
+                \math@fontsfalse\selectfont
+                A}%
+            \vss}%
+        }}
+\def\AllTeX{(\La\kern-.075em)\kern-.075em\TeX\xspace}
+\def\AMS{American Mathematical Society\xspace}
+\def\AmS{$\mathcal{A}$\kern-.1667em\lower.5ex\hbox
+    {$\mathcal{M}$}\kern-.125em$\mathcal{S}$}
+\def\AmSLaTeX{\AmS-\LaTeX\xspace}
+\let\latex\LaTeX
+\let\tex\TeX
+%
+\def\BibTeX{\textsc{Bib}\kern-.08em\TeX\index{BiBTeX@Bib\TeX}}
+\def\PT{Plain \TeX\index{Plain TeX@Plain \TeX}\xspace}
+\def\PST{{\texttt{PSTricks}}\xspace}
+\def\CTAN{{\texttt{CTAN}}\index{CTAN}\xspace}
+\def\PDF{{\texttt{PDF}}\xspace}
+\def\pst{{\texttt{pstricks}}\xspace}
+\def\PS{PostScript\xspace}
+\def\CT{Con\TeX t\index{ConTeXt@Con\TeX t}\xspace}
+\def\GS{Ghostscript\index{Ghostscript}\xspace}
+\def\GeX{G\kern-.1667em\lower.5ex\hbox{E}\kern-.125emX\@}
+\def\at{\char064}
+\def\VTeX{\texttt{V\TeX}\index{VTeX@\texttt{V\protect\TeX}}}
+\newcommand*\CMD[1]{{\texttt{\textbackslash #1}}}
+\newcommand\Paket[1]{\texttt{#1}}
+\providecommand\Programm[1]{\textsf{#1}}
+\providecommand\RaggedRight{\raggedright}
+%
+\def\Index#1{\index{#1}#1}
+\index{Environment|see{Umgebung}}
+\def\eIndex#1{\index{Umgebung!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\tIndex#1{\index{#1@\texttt{#1}}}
+\def\cIndex#1{\index{#1@\protect\CMD{#1}}}
+\def\pIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\ppIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}}
+\def\sIndex#1{\index{Syntax@\textbf{Syntax}!\protect\CMD{#1}}}
+\def\csIndex#1{\sIndex{#1}\cIndex{#1}}
+\def\PIndex#1{\index{Paket@\textbf{Paket}!\texttt{#1}}}
+\def\mIndex#1{\texttt{#1}\tIndex{#1}\pIndex{#1}}
+\def\aref#1{$\rightarrow$\vref{#1}}
+\def\PSindex#1{\index{PostScript!#1}}
+\def\Makroindex#1{\index{Makro!#1@\protect\CMD{#1}}}
+\def\Optindex#1{\index{Parameter@\textbf{Parameter}!\texttt{#1}}}
+\def\ttindex#1{\index{#1@\texttt{#1}}}
+\def\vert{\ensuremath{|}}
+%
+\let\Olddegrees\textdegrees
+\def\textdegrees{\ensuremath{\mbox{\Olddegrees}}}
+\def\sa{\ensuremath{\sphericalangle}\xspace}% needs amssymb
+%
+%
+%%-------------------------------- danger ---------------------------------------------
+\usepackage{manfnt}
+\usepackage{lettrine}
+\newsavebox{\dBox}
+
+\newenvironment{dangerPar*}
+{\gdef\dangerSym{\dbend\,\dbend}\@dangerPar}
+{\end@dangerPar}
+
+\newenvironment{dangerPar}
+{\gdef\dangerSym{\dbend\phantom{\,\dbend}}\@dangerPar}
+{\end@dangerPar}
+
+\def\@dangerPar{%
+  \begin{lrbox}{\dBox}
+    \minipage[c]{\linewidth-\widthof{\dangerSym}-\columnsep}%
+}
+\def\end@dangerPar{%
+    \endminipage
+  \end{lrbox}%
+  \trivlist\item\relax
+    \noindent
+    \minipage[c]{\widthof{\dangerSym}}
+      \raisebox{\height}[.9\height][.1\height]{\dangerSym}% ???
+    \endminipage
+    \hfill
+    \minipage[c]{\wd\dBox}
+      \usebox{\dBox}
+    \endminipage%
+  \endtrivlist
+}
+\newsavebox{\bombbox}
+\sbox\bombbox{%
+  \psset{unit=.55ex}%
+  \begin{pspicture}(-4,-4)(4,4)
+    \pscircle[fillcolor=gray,fillstyle=solid]{4}
+    \rput{45}{\psscaleboxto(6,0){\textsf{\textbf{PS}}}}
+    \psellipse*(0,3.8)(1,.2)
+    \psellipse*(0,5.5)(1,.2)
+    \psframe*(-1,3.8)(1,5.5)
+    \psbezier(0,5.5)(0,7)(1,8)(3.5,8)
+    \multido{\r=-0+40}{9}{\rput{\r}(3.5,8){\psline(0,0)(.4,0)}}
+  \end{pspicture}}
+
+\newcommand\danger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{{\small\dbend}}}
+  
+\newcommand\ddanger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{%
+    {\small\dbend\,\dbend}}}
+    
+\newcommand\DANGER{%    
+  \lettrine[lines=3,lraise=0.01,lhang=0,nindent=0pt,findent=.75em]{%
+    \usebox\bombbox}}
+%%------------------------------- Rest ------------------------------------------
+\pretolerance=500
+\tolerance=1000 
+\hbadness=3000
+\vbadness=3000
+\hyphenpenalty=400
+
+%-------------------------------- Listings -------------------------------------
+\usepackage{showexpl}% not a real PSTricks package
+%
+\renewcommand{\ttdefault}{ul9}% Luxi Mono
+%\lstset{language=PSTricks,keywordstyle=\small\fontfamily{ul9}\bfseries} 
+\lstset{wide=true} 
+%
+%-------------------------------- Allgemein -------------------------------------
+%\addtolength\belowcaptionskip{-10pt}
+%
+\providecommand\dante{DANTE \eV}
+\providecommand\eV{e.V\kern-.18em\@ifnextchar.{}{.}}
+\def\textat{\protect\makeatletter\texttt{@}\protect\makeatother}
+
+\def\lBrace{\texttt{\{}}
+\def\rBrace{\texttt{\}}}
+\def\lBracket{\texttt{[}}
+\def\rBracket{\texttt{]}}
+%
+\newcounter{SX@refC}% for texlive8
+\def\PSTemph#1{\textit{\texttt{#1}}}
+%
+\def\LPack#1{\texttt{#1}}
+\def\Lmenv#1{\texttt{#1}}
+\def\Lmcs#1{\CMD{#1}\Makroindex{#1}\cIndex{#1}}
+\let\xLcs\Lmcs
+\let\Lcs\CMD
+\let\Lit\texttt
+\def\Loption#1{\texttt{#1}\Optindex{#1}\ttindex{#1}}
+\def\LProg#1{\texttt{#1}\pIndex{#1}}
+\let\Prog\LProg
+\def\LFile#1{\texttt{#1}\tIndex{#1}}
+\def\LColor#1{\texttt{#1}\index{Farbe!#1@\texttt{#1}}}
+\def\Lindex#1{#1\index{#1}}% Ausgeben und in den Index
+\def\Lext#1{\texttt{#1}\index{Dateiendung!#1@\texttt{#1}}}
+\def\LClass#1{\texttt{#1}}
+\def\Lmnotation#1{\texttt{#1}\tIndex{#1}}
+\newcommand\Larga{}
+\DeclareRobustCommand\Larga[1]{$\langle$\PSTemph{#1}$\rangle$}
+\newcommand\LargA{}
+\DeclareRobustCommand\LargA[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largs{}
+\DeclareRobustCommand\Largs[1]{\lBracket$\langle$\PSTemph{#1}$\rangle$\rBracket}
+\newcommand\Largb{}
+\DeclareRobustCommand\Largb[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largr{}
+\DeclareRobustCommand\Largr[1]{\PSTemph{({#1})}}
+\DeclareRobustCommand\Largra[1]{(\Larga{#1})}
+\newcommand\Larg{}
+\DeclareRobustCommand\Larg[1]{\lBrace\texttt{#1}\rBrace}
+\def\begEnv#1{\CMD{begin\{#1\}}\tIndex{#1}}
+\def\endEnv#1{\CMD{end\{#1\}}}
+\def\OptArg{\Largs{Optionen}}
+\def\Largrao{($\langle x_0,y_0\rangle$)}
+\def\Largrai{($\langle x_1,y_1\rangle$)}
+\def\Largraii{($\langle x_2,y_2\rangle$)}
+\def\Largraiii{($\langle x_3,y_3\rangle$)}
+\def\Largran{($\langle x_n,y_n\rangle$)}
+%
+\input random
+\def\cite#1{}
+%
+\begin{document}
+
+\input{pst-labo-docEN}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.pdf b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.pdf
new file mode 100644
index 00000000000..cbb5863f015
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.pdf
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.tex b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.tex
new file mode 100644
index 00000000000..2028060ed4c
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docEN.tex
@@ -0,0 +1,920 @@
+%	$Id: pst-labo-docEN.tex,v 1.4 2005/10/13 19:07:24 patrick Exp patrick $	
+\title{\texttt{PST-Labo} - chemical objects\thanks{The english translation was done by Patrick Drechsler}\\
+\footnotesize{version \PSTfileversion}}
+\author{%
+Denis Girou\thanks{\url{Denis.Girou@idris.fr}}, 
+Christophe Jorssen\thanks{\url{Christophe.Jorssen@wanadoo.fr}},
+Manuel Luque\thanks{\url{Mluque5130@aol.com}} and
+Herbert Vo\ss\thanks{\url{voss@pstricks.de}}}
+\date{\today}
+\maketitle
+
+\begin{abstract}
+  \LPack{pst-labo} provides macros for a variety of devices used
+  mainly for chemical applications.\cite{pst-labo} Since most of these
+  devices have a standardised design \LPack{pst-labo} spares you the
+  trouble of having to create them manually. Besides the usage of the
+  package \LPack{pst-osci} this document also describes how to create
+  ``high-level'' objects using the command \PST .\cite{PSTricks2} All
+  basic objects are included in the file \LFile{pst-laboObj.tex} and
+  are loaded during the start of \LPack{pst-labo}. These objects can
+  be used for personal extensions. Section~\ref{sec:pstlabo:Objects}
+  gives an overview of all objects.
+\end{abstract}
+
+\tableofcontents
+
+\newpage
+% ---------------------------------------------------------------------------------------
+\section{Parameter}\label{sec:pstlabo8:Parameter}
+% ---------------------------------------------------------------------------------------
+Table~\ref{tab:pst-labo:Parameter} describes all parameters unique to
+\LPack{pst-labo}.
+
+\noindent
+\LTXtable{\linewidth}{pstlabo8-tab1-EN.tex}%
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{glassType}}\label{subsec-pstlabo-glassType}
+% ---------------------------------------------------------------------------------------
+\Loption{glassType} describes the type of glass container. A normal
+test tube is used by default.
+
+\bgroup
+\begin{LTXexample}[preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{bouchon}}\label{subsec-pstlabo-bouchon}
+% ---------------------------------------------------------------------------------------
+The option \Loption{bouchon} seals the respective glass container with
+a plug.
+
+\bgroup
+\begin{LTXexample}[width=0.575\linewidth,preset=\raggedright]
+\psset{unit=0.45cm}
+\psset{bouchon=true}
+\pstTubeEssais[glassType=tube]
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=flacon]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{pince}}\label{subsec-pstlabo-pince}
+% ---------------------------------------------------------------------------------------
+The option \Loption{pince} attaches a wooden test tub clamp to the
+glass container.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{bouchon=true,pince=true}
+\pstTubeEssais[glassType=tube]\hspace{1cm}
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeDroit}}\label{subsec-pstlabo-tubeDroit}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeDroit} inserts a narrow glass tube into the
+glass container. Since this combination is only useful in combination
+with the option \verb+bouchon=true+ it is set to this value by default
+internally. It is to be noted that there is no vertical spacing of the
+narrow glass tube inserted by default, so the user has to take care of
+this manually, f.\,ex.~using \verb+\rule{0pt}{4cm}+.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeDroit=true}
+\rule{0pt}{4cm}%
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoude}}\label{subsec-pstlabo-tubeCoude}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeCoude} is basically identical to the previous
+one, except for the fact that a right-angled glass tube is
+drawn. Therefor the extra space needed in the vertical direction is
+less.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoude=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+    
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeU}}\label{subsec-pstlabo-tubeCoudeU}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeCoude} is basically identical to the previous
+one, except for the fact that a U-shaped glass tube is drawn. Therefor
+there is less space needed in the vertical direction.
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoudeU=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=ballon]
+\end{LTXexample}
+\egroup
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeUB}}\label{subsec-pstlabo-tubeCoudeUB}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeCoudeUB} is an extension of the U-shaped glass
+tube which is only useful if extending the tube to the bottom makes
+sense, as shown for instance in the macro \Lmcs{pstChauffageBallon}.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=ballon}
+\pstChauffageBallon[tubeCoudeU] \pstChauffageBallon[tubeCoudeUB]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{etiquette} and \texttt{Numero}}\label{subsec-pstlabo-etiquette}
+% ---------------------------------------------------------------------------------------
+The option \Loption{etiquette} is a switch displaying labels defined
+using the option \Loption{Numero}.
+
+
+\bgroup
+\begin{LTXexample}[width=0.42\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[etiquette]
+\pstTubeEssais[etiquette,Numero=1]
+\pstTubeEssais[glassType=flacon,bouchon,%
+  etiquette,Numero={\small Cu$^{2+}$}]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubePenche}}\label{subsec-pstlabo-tubePenche}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubePenche} allows tilting the chemical devices to
+almost any desired angle while keeping the the air-water level
+horizontal. The angles must be within the interval of $-65\ldots
++65$.
+
+\bgroup
+\begin{LTXexample}[width=0.4\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[tubeDroit=true,tubePenche=40]
+\pstTubeEssais[tubePenche=-20,bouchon]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeSeul}}\label{subsec-pstlabo-tubeSeul}
+% ---------------------------------------------------------------------------------------
+\Loption{tubeSeul} influences the size of the chosen box. This can be
+advantageous as the following example using \Lmcs{psframebox} shows:
+If you do not wish to add a further container to the box on the right
+hand side the box would still have the same size as the one on the
+left. The option \verb+tubeSeul=true+ prevents this from
+happening. This option only has effects in combination with the macro
+\Lmcs{pstChauffageTube} and glass containers of the type \verb+ballon+
+and \verb+tube+.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=ballon,becBunsen}
+\psframebox{\pstChauffageTube[becBunsen,barbotage]}
+\psframebox{\pstChauffageTube[tubeSeul=true]}
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{becBunsen}}\label{subsec-pstlabo-becBunsen}
+% ---------------------------------------------------------------------------------------
+The option \Loption{becbunsen} toggles the drawing of a Bunsen burner.
+\Loption{becbunsen} is set to \verb+true+ by default for the macro
+\Lmcs{pstChauffeTube} and to \verb+false+ for the macro
+\Lmcs{pstChauffageBallon}.
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth]
+\psset{unit=0.5cm,tubeSeul=true}
+\pstChauffageTube 
+\pstChauffageTube[becBunsen=false]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{barbotage}}\label{subsec-pstlabo-barbotage}
+% ---------------------------------------------------------------------------------------
+The option \Loption{barbotage} creates an additional test tube which is
+connected via a narrow glass tube to the original glass container. To
+supply the necessary space the option \Loption{tubeSeul} should not be
+activated (see section~\vref{subsec-pstlabo-tubeSeul})
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstChauffageTube[tubeSeul=true] 
+\pstChauffageTube[barbotage]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{substance}}\label{subsec-pstlabo-substance}
+% ---------------------------------------------------------------------------------------
+The type of substance within the glass container can be selected by
+the option \Loption{substance}. The default value is a blue fluid
+(\Lmcs{pstBullesChampagne}). The available macros are summarised in
+table~\ref{tab-pstlabo-substance}. It should be pointed out that
+\Lmcs{pstFilaments} and \Lmcs{pstBULLES} are required parameters.
+
+\begin{table}[!htb]
+\caption{Summary of macros for the option \Loption{substance}}\label{tab-pstlabo-substance}
+\centering
+\begin{tabular}{@{}lcl@{}}
+\emph{macro} & \emph{default} & \emph{comment}\\\hline
+\Lmcs{pstBullesChampagne}\Largs{value} & 25 & standard\\
+\Lmcs{pstFilaments}\Largs{value}\Largb{color} & 5\\ 
+\Lmcs{pstBilles}\Largs{value} & 50 & two dimensional\\
+\Lmcs{pstBULLES}\Largs{value}\Largb{color} & 20 & three dimensional
+\end{tabular}
+\end{table}
+
+The optional value describes the number of passes for the internal
+\Lmcs{multido}-loop. It is basically unlimited although values larger
+than $80$ can lead to problems with \TeX 's defined memory. The later
+can be modified in the \TeX\ configuration file. The location of this
+file can be acquired using \verb+kpsewhich texmf.cnf+.
+
+\begin{lstlisting}[language=sh]
+voss@shania:~> kpsewhich texmf.cnf
+/usr/local/texlive/2005/texmf/web2c/texmf.cnf
+\end{lstlisting}
+
+
+The first example shows the default values using two random
+colours. The second example demonstrates the use of optional
+arguments. Basically the macros \Loption{substance} and
+\Loption{solide} can be mixed randomly.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[substance=\pstBullesChampagne] 
+\pstTubeEssais[substance=\pstFilaments{red}]
+\pstTubeEssais[substance=\pstBilles]
+\pstTubeEssais[substance=\pstBULLES{white}]
+\end{LTXexample}
+\egroup  
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[substance={\pstBullesChampagne[80]}] 
+\pstTubeEssais[substance={\pstFilaments[20]{black}}]
+\pstTubeEssais[substance={\pstBilles[80]}]
+\pstTubeEssais[substance={\pstBULLES[20]{white}}]
+\end{LTXexample}
+\egroup  
+
+When using the optional parameters for internal looping it has to be
+noted that this parameter itself is used as part of another optional
+parameter and therefor has to be set in curly braces as the above
+example illustrates.
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{solide}}\label{subsec-pstlabo-solide}
+% ---------------------------------------------------------------------------------------
+The option \Loption{solide} describes the type of substance within the
+glass containers. Table~\ref{tab-pstlabo-solide} summarises all
+available values. The same rules apply as described in
+section~\ref{subsec-pstlabo-substance}.
+
+\begin{table}[!htb]
+\caption{Summary of macros for the option \Loption{substance}}\label{tab-pstlabo-solide}
+\centering
+\begin{tabular}{@{}lc@{}}
+\emph{macro} & \emph{default} \\\hline
+\Lmcs{pstTournureCuivre}\Largs{value} & 30 \\
+\Lmcs{pstClouFer}\Largs{value} & 60\\ 
+\Lmcs{pstGrenailleZinc}\Largs{value} & 25 
+\end{tabular}
+\end{table}
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[solide=\pstTournureCuivre] 
+\pstTubeEssais[solide=\pstClouFer]
+\pstTubeEssais[solide=\pstGrenailleZinc]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[solide={\pstTournureCuivre[50]}] 
+\pstTubeEssais[solide={\pstGrenailleZinc[80]}]
+\pstTubeEssais[glassType=ballon,solide={\pstClouFer[50]}]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbe}}\label{subsec-pstlabo-tubeRecourbe}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeRecourbe} creates a device to collect exhausting
+gas from the glass container, including a Bunsen burner.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=erlen,recuperationGaz,substance=\pstTournureCuivre}
+\pstChauffageBallon
+\pstChauffageBallon[tubeRecourbe]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbeCourt}}\label{subsec-pstlabo-tubeRecourbeCourt}
+% ---------------------------------------------------------------------------------------
+The option \Loption{tubeRecourbe} creates a device to collect exhausting
+gas from the glass container, excluding a Bunsen burner.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=flacon,recuperationGaz,substance=\pstFilaments{red}}
+\pstChauffageBallon[tubeRecourbe]
+\pstChauffageBallon[tubeRecourbeCourt]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{doubletube}}\label{subsec-pstlabo-doubletube}
+% ---------------------------------------------------------------------------------------
+\Loption{doubletube} enables arranging two narrow glass tubes, one of
+which has a stopcock.
+
+\bgroup
+\begin{LTXexample}[width=0.6\linewidth]
+\rule{0pt}{4cm}
+\psset{unit=0.5cm,glassType=ballon,%
+  substance=\pstClouFer}
+\pstBallon
+\pstBallon[doubletube]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{refrigerantBoulle}}\label{subsec-pstlabo-refrigerantBoulle}
+% ---------------------------------------------------------------------------------------
+\Loption{refrigerantBoulle} is one of the options for outputting a
+more complex setup. When adding further devices it should be noted
+that the geometrical origin is located in the centre of the setup.
+
+\bgroup
+\begin{LTXexample}[width=0.3\linewidth]
+\psset{unit=0.5cm}
+\pstBallon[refrigerantBoulles,glassType=ballon,%
+  substance=\pstClouFer]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{recuperationGaz}}\label{subsec-pstlabo-recuperationGaz}
+% ---------------------------------------------------------------------------------------
+\Loption{recuperationGaz} describes the device collecting expanded gases.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=flacon,tubeRecourbe,substance={\pstFilaments[10]{red}}}
+\pstChauffageBallon
+\pstChauffageBallon[recuperationGaz]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{burette}}\label{subsec-pstlabo-burette}
+% ---------------------------------------------------------------------------------------
+The macro \Lmcs{pstDosage} displays a buret by default. This option
+suppresses its display.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm}
+\pstDosage[glassType=erlen]
+\pstDosage[glassType=erlen,burette=false]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauReactifBurette} and \texttt{couleurReactifBurette}}\label{subsec-pstlabo-niveauReactifBurette}
+% ---------------------------------------------------------------------------------------
+\Loption{niveauReactifBurette} and \Loption{couleurReactifBurette}
+control amount and color of the fluid in the buret.
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\egroup  
+\end{center}
+\begin{lstlisting}
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{AspectMelange} and \texttt{CouleurDistillat}}\label{subsec-pstlabo-AspectMelange}
+% ---------------------------------------------------------------------------------------
+\Loption{AspectMelange} defines the color of a chemical substance and
+must comply to a predefined style to ensure the creation of a color
+gradient. \Loption{CouleurDistillat} defines the color of the
+distillate without this restriction.
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\egroup  
+\end{center}
+
+\begin{lstlisting}
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{phmetre}}\label{subsec-pstlabo-phmetre}
+% ---------------------------------------------------------------------------------------
+\Loption{phmetre} displays a pH-meter. Note that this option is only
+available with the macro \Lmcs{pstDosage}.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher,burette=false}
+\pstDosage
+\pstDosage[phmetre]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{agitateurMagnetique}}\label{subsec-pstlabo-agitateurMagnetique}
+% ---------------------------------------------------------------------------------------
+\Loption{agitateurMagnetique} is activated by default and displays a
+heat block. When deactivated this option only the symbols are
+suppressed, the rectangle is still displayed.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,burette=false,glassType=becher}
+\pstDosage
+\pstDosage[agitateurMagnetique=false]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauLiquide1}, \texttt{niveauLiquide2}, \texttt{niveauLiquide3}
+    and  \texttt{aspectLiquide1}, \texttt{aspectLiquide2}, \texttt{aspectLiquide3}}\label{subsec-pstlabo-niveauLiquide1}
+% ---------------------------------------------------------------------------------------
+These options define fluid level and style of the liquids 1, 2 and 3
+respectively. The style can either be one of the default values or a
+newly defined one as described in
+section~\ref{subsec-pstlabo-substance}. Depending on the macro used
+not all possible options can be used.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm,glassType=becher}
+\rule{0pt}{6cm}
+\pstDosage[niveauReactifBurette=18,niveauLiquide1=30,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=20,niveauLiquide1=40,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=false,agitateurMagnetique=false]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\makebox[\textwidth]{%
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+}
+\egroup  
+
+\begin{lstlisting}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+\end{lstlisting}
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Predefined colours and styles}\label{sec:pstlabo8:Stile}
+% ---------------------------------------------------------------------------------------
+The following summary shows all predefined colours and styles provided
+by the package \LPack{pst-labo}, all of which all can be adapted by
+the user.
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\definecolor{Beige}         {rgb}{0.96,0.96,0.86}
+\definecolor{GrisClair}     {rgb}{0.8,0.8,0.8}
+\definecolor{GrisTresClair} {rgb}{0.9,0.9,0.9}
+\definecolor{OrangeTresPale}{cmyk}{0,0.1,0.3,0}
+\definecolor{OrangePale}    {cmyk}{0,0.2,0.4,0}
+\definecolor{BleuClair}     {cmyk}{0.2,0,0,0}
+\definecolor{LightBlue}     {rgb}{.68,.85,.9}
+\definecolor{Copper}        {cmyk}{0,0.9,0.9,0.2}
+\definecolor{Marron}        {cmyk}{0,0.3,0.5,.3}
+%
+\newpsstyle{aspectLiquide1}   {linestyle=none,fillstyle=solid,fillcolor=cyan}
+\newpsstyle{aspectLiquide2}   {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{aspectLiquide3}   {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Champagne}        {linestyle=none,fillstyle=solid,fillcolor=Beige}
+\newpsstyle{BilleThreeD}      {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradend=white,GradientCircle=true}
+\newpsstyle{Sang}             {linestyle=none,fillstyle=solid,fillcolor=red}
+\newpsstyle{Cobalt}           {linewidth=0.2,fillstyle=solid,fillcolor=blue}
+\newpsstyle{Huile}            {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{Vinaigre}         {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Diffusion}        {linestyle=none,fillstyle=gradient,gradmidpoint=0}
+\newpsstyle{DiffusionMelange2}{fillstyle=gradient,gradbegin=white,gradend=red,gradmidpoint=0,linecolor=red}
+\newpsstyle{flammeEtGrille}   {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradbegin=OrangePale,gradend=yellow}
+\newpsstyle{rayuresJaunes}    {fillstyle=hlines,linecolor=yellow,hatchcolor=yellow}
+\newpsstyle{DiffusionBleue}   {fillstyle=gradient,gradmidpoint=0,linestyle=none,gradbegin=green,gradend=cyan}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\section{Macros}\label{sec:pstlabo8:Makros}
+% ---------------------------------------------------------------------------------------
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstTubeEssais}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+This macro displays the simplest type of glass container and has
+already been used numerous times in previous examples. The default
+value when used without further parameters is a normal test tube
+(\verb+glassType=tube+).
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5}
+\pstTubeEssais
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=erlen,niveauLiquide1=80]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=ballon,niveauLiquide1=20,aspectLiquide1=DiffusionBleue]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageTube}}\label{sec:pstlabo8:pstChauffageTube}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstChauffageTube} enhances the previous macro to include either
+a heat block, a Bunsen burner or a second narrow glass tube
+respectively.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstBallon}}\label{sec:pstlabo8:pstBallon}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstBallon} is basically identical to \Lmcs{pstTubeEssais} with
+more possible options.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.3cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{0.5cm}{\pstBallon[refrigerantBoulles=true]}
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.25cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{1cm}{\pstBallon[refrigerantBoulles=true]}
+\end{lstlisting}
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageBallon}}\label{sec:pstlabo8:pstChauffageBallon}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstChauffageBallon} enhances the previous macro by displaying a
+Bunsen burner by default.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\end{lstlisting}
+
+
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]\hspace{3cm}
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]\hspace{.25cm}
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\end{lstlisting}
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEntonnoir}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstEntonnoir} displays a funnel. Called without any parameters
+it is combined with a test tube. It can be combined with any kind of setup.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstEntonnoir
+\pstEntonnoir[glassType=becher,tubePenche=-20]
+\pstEntonnoir[glassType=flacon,etiquette=true,Numero={\green 37},%
+  aspectLiquide1=DiffusionBleue,niveauLiquide1=80]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEprouvette}}\label{sec:pstlabo8:pstEprouvette}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstEprouvette} displays a measuring cylinder. Its size can by
+changed using the \PST scaling factor.
+
+\bgroup
+\begin{LTXexample}
+\pstEprouvette[yunit=0.5cm]
+\pstEprouvette[unit=0.6cm,niveauLiquide1=100,niveauLiquide2=60,niveauLiquide3=30]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstpipette}}\label{sec:pstlabo8:pstpipette}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstpipette} displays a pipette. Its scaling range can be altered
+by changing \PST scaling factors.
+
+\bgroup
+\begin{LTXexample}
+\pstpipette[unit=0.5cm,tubePenche=40]
+\pstpipette[yunit=0.5cm]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDosage}}\label{sec:pstlabo8:pstDosage}
+% ---------------------------------------------------------------------------------------
+\Lmcs{pstDosage} is normally used in combination with other
+devices. The buret has a maximal capacity of 25 mL. The current height
+and substrate can be changed by their options. An optional pH-meter
+(only with glass type \verb+becher+) or heat block can be selected.
+
+\bgroup\noindent
+\makebox[\linewidth]{%
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\egroup  
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDistillation}}\label{sec:pstlabo8:pstDistillation}
+% ---------------------------------------------------------------------------------------
+The only macro which has be passed on to \Lmcs{pstDistillation} are
+the dimensions of the \Lmenv{pspicture} environment.
+
+\medskip
+\noindent
+\Lmcs{pstDistillation}\\
+\Lmcs{pstDistillation}\Largr{$x_{ll},y_{ll}$}\Largr{$x_{ur},y_{ur}$} % $
+
+\medskip
+In case these coordinates are not supplied a rectangle of
+$(-4,-10)(8,7)$ is used, assuming that further objects will be
+included using \Lmcs{rput},
+
+\bgroup
+\begin{LTXexample}
+\psset{unit=0.5cm}
+\pstDistillation(-3,-10)(7,6)
+\end{LTXexample}
+\egroup  
+
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Basic objects}\label{sec:pstlabo:Objects}
+% ---------------------------------------------------------------------------------------
+The file \LFile{pst-laboObj.tex} includes all possible basic
+objects. For lack of space they are not displayed here explicitly.
+
+
+% ---------------------------------------------------------------------------------------
+\section{Examples}\label{sec:pstlabo:Beispiele}
+% ---------------------------------------------------------------------------------------
+Creating complex examples is eased significantly by using a coordinate
+grid underlying the setup (\Lmcs{psgrid}) as has been shown previously
+in section~\vref{sec:overlay:Ueberschreiben}.
+
+\begin{figure}
+\centering
+\bgroup
+\sffamily
+\begin{pspicture}(0,-4)(7,4)
+  \rput(3,0){\pstDosage[niveauReactifBurette=25,niveauLiquide1=30,%
+    aspectLiquide1=Champagne,glassType=becher,phmetre,unit=0.5]}
+  \rput(2,3){B\"urette}   
+  \rput(4.7,3.6){25 mL}
+  \rput(5.2,-2.2){H$_3$O$^+$+Cl$^-$}
+  \rput(.8,-3){PH-Messer} 
+  \rput(5,-2.8){20 mL}
+  \rput(5,1){Na$^+$+OH$^-$} \rput(6.4,-3.6){Heizplatte}
+  \psline{->}(2.7,2.9)(3.4,2.9)
+\end{pspicture}
+\begin{pspicture}(-3,-2)(2,3)
+  \psset{unit=0.5cm}
+  \rput(-4.5,4.0){\pstEprouvette[tubePenche=-60,niveauLiquide1=90,niveauLiquide2=50]}
+  \rput(.5,0){\pstEntonnoir[glassType=flacon,niveauLiquide1=30]}
+  \rput(.5,7.5){
+    \framebox{\begin{minipage}{3.2cm}Nach der Dekan\-ta\-tion
+    sind die einzelnen Phasen getrennt, das Leichteste sammelt man durch Filtrieren.
+    \end{minipage}}}
+\end{pspicture}
+\egroup
+\caption{Example usage of \Lmcs{pstDosage}}
+\end{figure}
+
+\begin{figure}
+\centering
+\bgroup
+\psset{unit=0.5cm,etiquette}
+\newpsstyle{Nickel}{fillstyle=solid,fillcolor=green}
+\pstTubeEssais[niveauLiquide1=20,aspectLiquide1=Champagne,Numero=1]\kern-20pt
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Cobalt,Numero=2]\kern-20pt
+\pstTubeEssais[niveauLiquide1=40,aspectLiquide1=Sang,Numero=3]\kern-20pt
+\pstTubeEssais[Numero=4]\kern-20pt
+\psset{bouchon,glassType=flacon}
+\pstTubeEssais[aspectLiquide1=Vinaigre,Numero={\footnotesize MnO$_4^-$}]
+\pstTubeEssais[aspectLiquide1=Huile,unit=0.75,Numero={\footnotesize Ce$^{4+}$}]
+\pstTubeEssais[aspectLiquide1=Nickel,Numero={\footnotesize Ni$^{2+}$}]
+\pstTubeEssais[Numero={\footnotesize Cu$^{2+}$}]
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Champagne,Numero={\footnotesize NaOH},unit=0.75]
+\egroup  
+\caption{Example usage of \Lmcs{pstTubeEssais}}
+\end{figure}
+
+
+\nocite{*}
+\bibliographystyle{plain}
+\bibliography{pst-labo-doc}
+
+
+\endinput
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.ltx b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.ltx
new file mode 100644
index 00000000000..f52b7990c76
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.ltx
@@ -0,0 +1,227 @@
+%% bAS 
+\documentclass[11pt,a4paper,frenchb]{article}
+%% eAS
+\usepackage[latin1]{inputenc}%
+\usepackage[T1]{fontenc}
+\usepackage{babel}
+\usepackage{lmodern}
+\usepackage{enumerate,longtable,url}
+\let\OldUrl=\url
+\renewcommand\url[1]{\protect\OldUrl{#1}}
+%% bAS
+\usepackage[scaled]{luximono}
+%% eAS
+%
+\usepackage{xspace,nonfloat}
+\usepackage[bottom]{footmisc}
+%
+\usepackage{tabularx}
+\usepackage{longtable}
+\usepackage{ltxtable}
+\usepackage[french]{varioref}
+\usepackage[NewCommands,NewParameters]{ragged2e}
+\usepackage{url}
+\def\UrlFont{\ttfamily}
+\makeatletter
+%\def\verbatim@font{\small\normalfont\ttfamily}
+%
+\usepackage[dvipsnames,prologue,table]{pstricks}
+\colorlet{tableheadcolor}{gray!25}
+\colorlet{tablerowcolor}{gray!12}
+\newcommand\XCBox[1]{\fcolorbox{black}{#1}{\phantom{aa}} \small #1}
+\usepackage{pst-labo}
+\let\PSTfileversion\fileversion
+\SpecialCoor
+\psset{griddots=10,subgriddiv=0,gridlabels=7pt}
+%
+\definecolor{hellgelb}{rgb}{1,1,0.8}
+\definecolor{shadecolor}{rgb}{0.9,0.9,0.9}
+\definecolor{sphgrau}{rgb}{0.40,0.40,0.40}
+%
+% ------------------------------- Namen Abkuerungen ----------------------
+\newcommand{\La}%
+   {L\kern-.36em
+        {\setbox0\hbox{T}%
+         \vbox to\ht0{\hbox{$\m@th$%
+                \csname S@\f@size\endcsname
+                \fontsize\sf@size\z@
+                \math@fontsfalse\selectfont
+                A}%
+            \vss}%
+        }}
+\def\AllTeX{(\La\kern-.075em)\kern-.075em\TeX\xspace}
+\def\AMS{American Mathematical Society\xspace}
+\def\AmS{$\mathcal{A}$\kern-.1667em\lower.5ex\hbox
+    {$\mathcal{M}$}\kern-.125em$\mathcal{S}$}
+\def\AmSLaTeX{\AmS-\LaTeX\xspace}
+\let\latex\LaTeX
+\let\tex\TeX
+%
+\def\BibTeX{\textsc{Bib}\kern-.08em\TeX\index{BiBTeX@Bib\TeX}}
+\def\PT{Plain \TeX\index{Plain TeX@Plain \TeX}\xspace}
+\def\PST{{\texttt{PSTricks}}\xspace}
+\def\CTAN{{\texttt{CTAN}}\index{CTAN}\xspace}
+\def\PDF{{\texttt{PDF}}\xspace}
+\def\pst{{\texttt{pstricks}}\xspace}
+\def\PS{PostScript\xspace}
+\def\CT{Con\TeX t\index{ConTeXt@Con\TeX t}\xspace}
+\def\GS{Ghostscript\index{Ghostscript}\xspace}
+\def\GeX{G\kern-.1667em\lower.5ex\hbox{E}\kern-.125emX\@}
+\def\at{\char064}
+\def\VTeX{\texttt{V\TeX}\index{VTeX@\texttt{V\protect\TeX}}}
+\newcommand*\CMD[1]{{\texttt{\textbackslash #1}}}
+\newcommand\Paket[1]{\texttt{#1}}
+\providecommand\Programm[1]{\textsf{#1}}
+\providecommand\RaggedRight{\raggedright}
+%
+\def\Index#1{\index{#1}#1}
+\index{Environment|see{Umgebung}}
+\def\eIndex#1{\index{Umgebung!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\tIndex#1{\index{#1@\texttt{#1}}}
+\def\cIndex#1{\index{#1@\protect\CMD{#1}}}
+\def\pIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}\index{#1@\texttt{#1}}}
+\def\ppIndex#1{\index{Parameter@\textbf{Parameter}!#1@\texttt{#1}}}
+\def\sIndex#1{\index{Syntax@\textbf{Syntax}!\protect\CMD{#1}}}
+\def\csIndex#1{\sIndex{#1}\cIndex{#1}}
+\def\PIndex#1{\index{Paket@\textbf{Paket}!\texttt{#1}}}
+\def\mIndex#1{\texttt{#1}\tIndex{#1}\pIndex{#1}}
+\def\aref#1{$\rightarrow$\vref{#1}}
+\def\PSindex#1{\index{PostScript!#1}}
+\def\Makroindex#1{\index{Makro!#1@\protect\CMD{#1}}}
+\def\Optindex#1{\index{Parameter@\textbf{Parameter}!\texttt{#1}}}
+\def\ttindex#1{\index{#1@\texttt{#1}}}
+\def\vert{\ensuremath{|}}
+%
+\let\Olddegrees\textdegrees
+\def\textdegrees{\ensuremath{\mbox{\Olddegrees}}}
+\def\sa{\ensuremath{\sphericalangle}\xspace}% needs amssymb
+%
+%
+%%-------------------------------- danger ---------------------------------------------
+\usepackage{manfnt}
+\usepackage{lettrine}
+\newsavebox{\dBox}
+
+\newenvironment{dangerPar*}
+{\gdef\dangerSym{\dbend\,\dbend}\@dangerPar}
+{\end@dangerPar}
+
+\newenvironment{dangerPar}
+{\gdef\dangerSym{\dbend\phantom{\,\dbend}}\@dangerPar}
+{\end@dangerPar}
+
+\def\@dangerPar{%
+  \begin{lrbox}{\dBox}
+    \minipage[c]{\linewidth-\widthof{\dangerSym}-\columnsep}%
+}
+\def\end@dangerPar{%
+    \endminipage
+  \end{lrbox}%
+  \trivlist\item\relax
+    \noindent
+    \minipage[c]{\widthof{\dangerSym}}
+      \raisebox{\height}[.9\height][.1\height]{\dangerSym}% ???
+    \endminipage
+    \hfill
+    \minipage[c]{\wd\dBox}
+      \usebox{\dBox}
+    \endminipage%
+  \endtrivlist
+}
+\newsavebox{\bombbox}
+\sbox\bombbox{%
+  \psset{unit=.55ex}%
+  \begin{pspicture}(-4,-4)(4,4)
+    \pscircle[fillcolor=gray,fillstyle=solid]{4}
+    \rput{45}{\psscaleboxto(6,0){\textsf{\textbf{PS}}}}
+    \psellipse*(0,3.8)(1,.2)
+    \psellipse*(0,5.5)(1,.2)
+    \psframe*(-1,3.8)(1,5.5)
+    \psbezier(0,5.5)(0,7)(1,8)(3.5,8)
+    \multido{\r=-0+40}{9}{\rput{\r}(3.5,8){\psline(0,0)(.4,0)}}
+  \end{pspicture}}
+
+\newcommand\danger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{{\small\dbend}}}
+  
+\newcommand\ddanger{%
+  \lettrine[lines=2,lraise=0.65,nindent=0pt,findent=.5em]{%
+    {\small\dbend\,\dbend}}}
+    
+\newcommand\DANGER{%    
+  \lettrine[lines=3,lraise=0.01,lhang=0,nindent=0pt,findent=.75em]{%
+    \usebox\bombbox}}
+%%------------------------------- Rest ------------------------------------------
+\pretolerance=500
+\tolerance=1000 
+\hbadness=3000
+\vbadness=3000
+\hyphenpenalty=400
+
+%-------------------------------- Listings -------------------------------------
+\usepackage{showexpl}% not a real PSTricks package
+%
+\renewcommand{\ttdefault}{ul9}% Luxi Mono
+\lstset{language=PSTricks,keywordstyle=\small\fontfamily{ul9}\bfseries} 
+\lstset{wide=true} 
+%
+%-------------------------------- Allgemein -------------------------------------
+%\addtolength\belowcaptionskip{-10pt}
+%
+\providecommand\dante{DANTE \eV}
+\providecommand\eV{e.V\kern-.18em\@ifnextchar.{}{.}}
+\def\textat{\protect\makeatletter\texttt{@}\protect\makeatother}
+
+\def\lBrace{\texttt{\{}}
+\def\rBrace{\texttt{\}}}
+\def\lBracket{\texttt{[}}
+\def\rBracket{\texttt{]}}
+%
+\newcounter{SX@refC}% for texlive8
+\def\PSTemph#1{\textit{\texttt{#1}}}
+%
+\def\LPack#1{\texttt{#1}}
+\def\Lmenv#1{\texttt{#1}}
+\def\Lmcs#1{\CMD{#1}\Makroindex{#1}\cIndex{#1}}
+\let\xLcs\Lmcs
+\let\Lcs\CMD
+\let\Lit\texttt
+\def\Loption#1{\texttt{#1}\Optindex{#1}\ttindex{#1}}
+\def\LProg#1{\texttt{#1}\pIndex{#1}}
+\let\Prog\LProg
+\def\LFile#1{\texttt{#1}\tIndex{#1}}
+\def\LColor#1{\texttt{#1}\index{Farbe!#1@\texttt{#1}}}
+\def\Lindex#1{#1\index{#1}}% Ausgeben und in den Index
+\def\Lext#1{\texttt{#1}\index{Dateiendung!#1@\texttt{#1}}}
+\def\LClass#1{\texttt{#1}}
+\def\Lmnotation#1{\texttt{#1}\tIndex{#1}}
+\newcommand\Larga{}
+\DeclareRobustCommand\Larga[1]{$\langle$\PSTemph{#1}$\rangle$}
+\newcommand\LargA{}
+\DeclareRobustCommand\LargA[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largs{}
+\DeclareRobustCommand\Largs[1]{\lBracket$\langle$\PSTemph{#1}$\rangle$\rBracket}
+\newcommand\Largb{}
+\DeclareRobustCommand\Largb[1]{\lBrace$\langle$\PSTemph{#1}$\rangle$\rBrace}
+\newcommand\Largr{}
+\DeclareRobustCommand\Largr[1]{\PSTemph{({#1})}}
+\DeclareRobustCommand\Largra[1]{(\Larga{#1})}
+\newcommand\Larg{}
+\DeclareRobustCommand\Larg[1]{\lBrace\texttt{#1}\rBrace}
+\def\begEnv#1{\CMD{begin\{#1\}}\tIndex{#1}}
+\def\endEnv#1{\CMD{end\{#1\}}}
+\def\OptArg{\Largs{Optionen}}
+\def\Largrao{($\langle x_0,y_0\rangle$)}
+\def\Largrai{($\langle x_1,y_1\rangle$)}
+\def\Largraii{($\langle x_2,y_2\rangle$)}
+\def\Largraiii{($\langle x_3,y_3\rangle$)}
+\def\Largran{($\langle x_n,y_n\rangle$)}
+%
+\input random
+\def\cite#1{}
+%
+\begin{document}
+
+\input{pst-labo-docFR}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.pdf b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.pdf
new file mode 100644
index 00000000000..697f04bb483
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.pdf
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.tex b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.tex
new file mode 100644
index 00000000000..ec1762a69fb
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pst-labo-docFR.tex
@@ -0,0 +1,916 @@
+\title{\texttt{PST-Labo} - matériel de chimie\thanks{Traduction française
+    réalisée par Arnaud Schmittbuhl}\\
+\footnotesize{version \PSTfileversion}}
+\author{%
+Denis Girou\thanks{\url{Denis.Girou@idris.fr}}, 
+Christophe Jorssen\thanks{\url{Christophe.Jorssen@wanadoo.fr}},
+Manuel Luque\thanks{\url{Mluque5130@aol.com}} and
+Herbert Vo\ss\thanks{\url{voss@pstricks.de}}}
+\date{\today}
+\maketitle
+
+\begin{abstract}
+  L'extension \LPack{pst-labo} propose un ensemble de macros pour dessiner le
+  matériel utilisé en chimie. \cite{pst-labo} En suivant les schématisations
+  standards employées, \LPack{pst-labo} vous évite ainsi d'avoir à les réaliser
+  vous même. Au-delà du simple usage de \LPack{pst-labo}, ce document explique
+  comment créer des objets de « haut-niveau » à l'aide de commandes de
+  \PST. \cite{PSTricks2} Tous les objets de base sont contenus dans le fichier
+  \LFile{pst-laboObj.tex} et sont chargés au démarrage de l'extension
+  \LPack{pst-labo}. Ces objets peuvent être utilisés en vue de créer une
+  extension personnelle et sont répertoriés dans la
+  section~\ref{sec:pstlabo:Objects}. 
+\end{abstract}
+
+\tableofcontents
+
+\newpage
+% ---------------------------------------------------------------------------------------
+\section{Paramètres}\label{sec:pstlabo8:Parameter}
+% ---------------------------------------------------------------------------------------
+Le tableau~\ref{tab:pst-labo:Parameter} répertorie l'ensemble des paramètres
+propres à \LPack{pst-labo}.
+
+\noindent
+\LTXtable{\linewidth}{pstlabo8-tab1-FR.tex}%
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{Type de verrerie}}\label{subsec-pstlabo-glassType}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{glassType} sert à décrire le type de verrerie. Par défaut, il
+s'agit d'un tube à essai.
+
+\bgroup
+\begin{LTXexample}[preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{bouchon}}\label{subsec-pstlabo-bouchon}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{bouchon} représente la verrerie hermétiquement scellée par un
+bouchon.
+
+\bgroup
+\begin{LTXexample}[width=0.575\linewidth,preset=\raggedright]
+\psset{unit=0.45cm}
+\psset{bouchon=true}
+\pstTubeEssais[glassType=tube]
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\pstTubeEssais[glassType=flacon]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{pince}}\label{subsec-pstlabo-pince}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{pince} place une pince en bois autour du col de la verrerie.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{bouchon=true,pince=true}
+\pstTubeEssais[glassType=tube]\hspace{1cm}
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeDroit}}\label{subsec-pstlabo-tubeDroit}
+%
+%---------------------------------------------------------------------------------------
+L'option \Loption{tubeDroit} place un réfrigérant à air dans le bouchon. 
+Cette option n'est utilisable que si \verb+bouchon=true+, ce qui assuré en
+interne par défaut. Prenez garde au fait qu'aucun espace vertical n'est réservé
+au-dessus de la verrerie pour placer le réfrigérant. Cette espace doit être
+placé manuellement, par exemple avec \verb+\rule{0pt}{4cm}+.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeDroit=true}
+\rule{0pt}{4cm}%
+\pstTubeEssais
+\pstTubeEssais[glassType=ballon]
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoude}}\label{subsec-pstlabo-tubeCoude}
+%
+%---------------------------------------------------------------------------------------
+L'option \Loption{tubeCoude} est pratiquement identique à la précédente, à la
+différence du coude à angle droit. L'espace vertical nécessaire au-dessus de
+la verrerie est donc moins important.
+
+\bgroup
+\begin{LTXexample}[width=0.55\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoude=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=erlen]
+\end{LTXexample}
+\egroup
+
+    
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeU}}\label{subsec-pstlabo-tubeCoudeU}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubeCoudeU} est similaire à la précédente, mais le coude a
+une forme de U. Là aussi, moins d'espace vertical est nécessaire à son placement.
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\psset{tubeCoudeU=true}
+\rule{0pt}{2.5cm}%
+\pstTubeEssais[glassType=ballon]
+\end{LTXexample}
+\egroup
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeCoudeUB}}\label{subsec-pstlabo-tubeCoudeUB}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubeCoudeUB} ressemble au tube coudé en U mais s'étend plus
+bas. Ceci peut être est intéressant lors d'une utilisation conjointe avec la
+commande \Lmcs{pstChauffageBallon}.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=ballon}
+\pstChauffageBallon[tubeCoudeU] \pstChauffageBallon[tubeCoudeUB]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{etiquette} et \texttt{Numero}}\label{subsec-pstlabo-etiquette}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{etiquette} est un booléen commandant l'affichage d'une
+étiquette dont le contenu se trouve dans le paramètre \Loption{Numero}.
+
+\bgroup
+\begin{LTXexample}[width=0.42\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[etiquette]
+\pstTubeEssais[etiquette,Numero=1]
+\pstTubeEssais[glassType=flacon,bouchon,%
+  etiquette,Numero={\small Cu$^{2+}$}]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubePenche}}\label{subsec-pstlabo-tubePenche}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubePenche} permet d'incliner la verrerie utilisée en
+conservant horizontal l'interface air-eau. Les angles d'inclinaison doivent
+être compris entre $-65$ et $+65$ degrés.
+
+\bgroup
+\begin{LTXexample}[width=0.4\linewidth,preset=\raggedright]
+\psset{unit=0.5cm}
+\pstTubeEssais[tubeDroit=true,tubePenche=40]
+\pstTubeEssais[tubePenche=-20,bouchon]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeSeul}}\label{subsec-pstlabo-tubeSeul}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubeSeul} détermine la taille du dessin. Les figures suivantes
+illustrent l'intérêt de ce paramètre, avec la commande \Lmcs{psframebox}.
+Si l'option n'était pas employée, la figure de droite, où le tube à essai de
+barbotage est absent, aurait la même largeur que la figure de gauche.
+L'option \verb+tubeSeul=true+ prévient ce comportement. Cette option ne
+fonctionne qu'avec la commande \Lmcs{pstChauffageTube} et de la verrerie de
+type \verb+ballon+ et \verb+tube+.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=ballon,becBunsen}
+\psframebox{\pstChauffageTube[becBunsen,barbotage]}
+\psframebox{\pstChauffageTube[tubeSeul=true]}
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{becBunsen}}\label{subsec-pstlabo-becBunsen}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{becbunsen} ajoute un bec Bunsen sous la verrerie.
+Par défaut, ce paramètre est activé (\verb+becbunsen=true+) pour la commande 
+\Lmcs{pstChauffeTube} et désactivé (\verb+false+) pour la commande 
+\Lmcs{pstChauffageBallon}.
+
+\bgroup
+\begin{LTXexample}[width=0.5\linewidth]
+\psset{unit=0.5cm,tubeSeul=true}
+\pstChauffageTube 
+\pstChauffageTube[becBunsen=false]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{barbotage}}\label{subsec-pstlabo-barbotage}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{barbotage} place un tube à essai supplémentaire, relié par un
+tube à dégagement au premier tube. Afin de réserver la largeur suffisante pour
+placer l'ensemble, le paramètre \Loption{tubeSeul} ne doit pas être activé
+(voir la section~\vref{subsec-pstlabo-tubeSeul}).
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstChauffageTube[tubeSeul=true] 
+\pstChauffageTube[barbotage]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{substance}}\label{subsec-pstlabo-substance}
+% ---------------------------------------------------------------------------------------
+La nature de la substance placée dans la verrerie est choisie par l'option
+\Loption{substance}. Il s'agit, par défaut, d'un liquide bleu
+(\Lmcs{pstBullesChampagne}). Le tableau~\ref{tab-pstlabo-substance} recense les
+divers choix possibles. Les options \Lmcs{pstFilaments} et \Lmcs{pstBULLES}
+contiennent également un paramètre de couleur.
+
+\begin{table}[!htb]
+\caption{Résumé des commandes de l'option \Loption{substance}}\label{tab-pstlabo-substance}
+\centering
+\begin{tabular}{@{}lcl@{}}
+\emph{commande} & \emph{défaut} & \emph{commentaire}\\\hline
+\Lmcs{pstBullesChampagne}\Largs{valeur} & 25 & standard\\
+\Lmcs{pstFilaments}\Largs{valeur}\Largb{couleur} & 5\\ 
+\Lmcs{pstBilles}\Largs{valeur} & 50 & deux dimensions\\
+\Lmcs{pstBULLES}\Largs{valeur}\Largb{couleur} & 20 & trois dimensions
+\end{tabular}
+\end{table}
+
+Le paramètre optionnel correspond au nombre de tour de la boucle
+\Lmcs{multido}. Il n'est pas limité mais des valeurs supérieures à $80$ peuvent
+saturer la mémoire allouée par \TeX. Pour modifier cette taille, il faut se
+référer au fichier de configuration de \TeX, localisable par la commande 
+\verb+kpsewhich texmf.cnf+.
+
+\begin{lstlisting}[language=sh]
+voss@shania:~> kpsewhich texmf.cnf
+/usr/local/texlive/2005/texmf/web2c/texmf.cnf
+\end{lstlisting}
+
+
+La première série d'exemples montre le comportement par défaut, avec deux
+couleurs aléatoires. La seconde illustre le comportement du paramètre
+optionnel. Les commandes \Loption{substance} et \Loption{solide} peuvent être
+associées sans difficultés.
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[substance=\pstBullesChampagne] 
+\pstTubeEssais[substance=\pstFilaments{red}]
+\pstTubeEssais[substance=\pstBilles]
+\pstTubeEssais[substance=\pstBULLES{white}]
+\end{LTXexample}
+\egroup  
+
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[substance={\pstBullesChampagne[80]}] 
+\pstTubeEssais[substance={\pstFilaments[20]{black}}]
+\pstTubeEssais[substance={\pstBilles[80]}]
+\pstTubeEssais[substance={\pstBULLES[20]{white}}]
+\end{LTXexample}
+\egroup  
+
+Lorsque le paramètre optionnel est utilisé, il faut tenir compte du fait qu'il
+fait partie d'un autre paramètre, si bien que l'ensemble doit être placé entre
+accolades, comme le montrent les exemples précédents.
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{solide}}\label{subsec-pstlabo-solide}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{solide} permet de spécifier le type de substance que
+contiendra la verrerie. L'ensemble des paramètres acceptés se trouve dans le
+tableau~\ref{tab-pstlabo-solide}. Les règles d'application sont identiques à
+celles de la section~\ref{subsec-pstlabo-substance}.
+
+\begin{table}[!htb]
+\caption{Résumé des commandes de l'option \Loption{substance}}\label{tab-pstlabo-solide}
+\centering
+\begin{tabular}{@{}lc@{}}
+\emph{commande} & \emph{défaut} \\\hline
+\Lmcs{pstTournureCuivre}\Largs{valeur} & 30 \\
+\Lmcs{pstClouFer}\Largs{valeur} & 60\\ 
+\Lmcs{pstGrenailleZinc}\Largs{valeur} & 25 
+\end{tabular}
+\end{table}
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais 
+\pstTubeEssais[solide=\pstTournureCuivre] 
+\pstTubeEssais[solide=\pstClouFer]
+\pstTubeEssais[solide=\pstGrenailleZinc]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher}
+\pstTubeEssais[solide={\pstTournureCuivre[50]}] 
+\pstTubeEssais[solide={\pstGrenailleZinc[80]}]
+\pstTubeEssais[glassType=ballon,solide={\pstClouFer[50]}]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbe}}\label{subsec-pstlabo-tubeRecourbe}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubeRecourbe} place un tube à dégagement courbé sur le
+bouchon de la verrerie employée, ainsi qu'un bec Bunsen.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=erlen,recuperationGaz,substance=\pstTournureCuivre}
+\pstChauffageBallon
+\pstChauffageBallon[tubeRecourbe]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{tubeRecourbeCourt}}\label{subsec-pstlabo-tubeRecourbeCourt}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{tubeRecourbeCourt} est semblable à l'option
+\Loption{tubeRecourbe} mais place un tube court, sans bec Bunsen.
+
+\bgroup
+\begin{LTXexample}[pos=t,preset=\raggedright]
+\psset{unit=0.5cm,glassType=flacon,recuperationGaz,substance=\pstFilaments{red}}
+\pstChauffageBallon[tubeRecourbe]
+\pstChauffageBallon[tubeRecourbeCourt]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{doubletube}}\label{subsec-pstlabo-doubletube}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{doubletube} dessine deux tubes à dégagement, dont un avec 
+un robinet d'arrêt.
+
+\bgroup
+\begin{LTXexample}[width=0.6\linewidth]
+\rule{0pt}{4cm}
+\psset{unit=0.5cm,glassType=ballon,%
+  substance=\pstClouFer}
+\pstBallon
+\pstBallon[doubletube]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{refrigerantBoulle}}\label{subsec-pstlabo-refrigerantBoulle}
+% ---------------------------------------------------------------------------------------
+Pour représenter un montage à reflux, il faut utiliser l'option
+\Loption{refrigerantBoulle} qui place un réfrigérant à boule au dessus du
+ballon, et un chauffe-ballon électrique en dessous. Si d'autres éléments sont
+ajoutés, il faudra tenir compte du fait que le centre graphique du dessin
+correspond au centre géométrique de la figure.
+
+\bgroup
+\begin{LTXexample}[width=0.3\linewidth]
+\psset{unit=0.5cm}
+\pstBallon[refrigerantBoulles,glassType=ballon,%
+  substance=\pstClouFer]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{recuperationGaz}}\label{subsec-pstlabo-recuperationGaz}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{recuperationGaz} place le dispositif de récupération des gaz.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=flacon,tubeRecourbe,substance={\pstFilaments[10]{red}}}
+\pstChauffageBallon
+\pstChauffageBallon[recuperationGaz]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{burette}}\label{subsec-pstlabo-burette}
+% ---------------------------------------------------------------------------------------
+Par défaut, la commande \Lmcs{pstDosage} dessine un montage de dosage, avec
+burette. L'utilisation de cette option permet de supprimer la burette.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm}
+\pstDosage[glassType=erlen]
+\pstDosage[glassType=erlen,burette=false]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauReactifBurette} et \texttt{couleurReactifBurette}}\label{subsec-pstlabo-niveauReactifBurette}
+% ---------------------------------------------------------------------------------------
+Les options \Loption{niveauReactifBurette} et \Loption{couleurReactifBurette}
+contrôlent respectivement le niveau, en pourcentage, et la couleur du liquide
+dans la burette. 
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\egroup  
+\end{center}
+\begin{lstlisting}
+\psset{unit=0.4cm,glassType=erlen,niveauLiquide1=60}
+\pstDosage[niveauReactifBurette=25,couleurReactifBurette=cyan]
+\pstDosage[niveauReactifBurette=10]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{AspectMelange} et \texttt{CouleurDistillat}}\label{subsec-pstlabo-AspectMelange}
+% ---------------------------------------------------------------------------------------
+La couleur du mélange des réactifs se fait sous forme d'un gradient de couleur
+que l'on sélectionne par l'option \Loption{AspectMelange}. Elle doit
+correspondre à l'un des styles prédéfinis. La couleur du distillat est régie par
+l'option \Loption{CouleurDistillat} 
+
+\begin{center}
+\bgroup
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\egroup  
+\end{center}
+
+\begin{lstlisting}
+\psset{unit=0.4cm}
+\pstDistillation(-3,-10)(7,6)\quad
+\pstDistillation[AspectMelange=Diffusion,CouleurDistillat=red](-3,-10)(7,6)
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{phmetre}}\label{subsec-pstlabo-phmetre}
+% ---------------------------------------------------------------------------------------
+L'option \Loption{phmetre} ne fonctionne qu'avec la commande \Lmcs{pstDosage}
+et place un pH-mètre dans le bécher de dosage.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,glassType=becher,burette=false}
+\pstDosage
+\pstDosage[phmetre]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{agitateurMagnetique}}\label{subsec-pstlabo-agitateurMagnetique}
+% ---------------------------------------------------------------------------------------
+Active par défaut, l'option \Loption{agitateurMagnetique} place l'agitateur
+magnétique dans le bécher. Lorsqu'elle est désactivée, l'agitateur et le
+dispositif de commande de sa rotation disparaissent.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm,burette=false,glassType=becher}
+\pstDosage
+\pstDosage[agitateurMagnetique=false]
+\end{LTXexample}
+\egroup
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\texttt{niveauLiquide1}, \texttt{niveauLiquide2}, \texttt{niveauLiquide3}
+    et \texttt{aspectLiquide1}, \texttt{aspectLiquide2}, \texttt{aspectLiquide3}}\label{subsec-pstlabo-niveauLiquide1}
+% ---------------------------------------------------------------------------------------
+Ces options servent à définir le niveau et le style des liquides 1, 2 et 3.
+Le style peut être un de ceux prédéfinis ou une création personnelle (voir la
+section~\ref{subsec-pstlabo-substance}). Selon la commande employée, toutes les
+options ne sont pas accessibles.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.4cm,glassType=becher}
+\rule{0pt}{6cm}
+\pstDosage[niveauReactifBurette=18,niveauLiquide1=30,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=20,niveauLiquide1=40,aspectLiquide1=Champagne,%
+  glassType=becher,phmetre=false,agitateurMagnetique=false]
+\end{LTXexample}
+\egroup  
+
+\bgroup
+\makebox[\textwidth]{%
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+}
+\egroup  
+
+\begin{lstlisting}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \psset{glassType=tube}
+  \rput(2.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(3,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=75,aspectLiquide1=Sang]}
+  \rput(2,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80]}
+\end{pspicture}
+\begin{pspicture}(0,0)(5,6)
+  \rput(4,3){\pstChauffageBallon[becBunsen=true,unit=0.5]}
+  \rput(2.5,4){\pstBallon[glassType=becher,xunit=1,yunit=0.5,aspectLiquide1=Champagne,runit=0.7]}
+  \rput(2.4,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=70,aspectLiquide1=Diffusion]}
+  \rput(2.8,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=65,aspectLiquide1=Sang]}
+  \rput(1.7,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=10]}
+  \rput(3.5,3.7){\pstTubeEssais[tubeDroit=true,unit=0.35,niveauLiquide1=80,tubePenche=-10]}
+\end{pspicture}
+\begin{pspicture}(1,3)(5,6)
+  \rput(2.5,4){\pstBallon[glassType=ballon,unit=0.5,niveauLiquide1=15]}
+  \rput(1.3,5.4){\pstTubeEssais[unit=0.5,niveauLiquide1=95,
+  niveauLiquide2=60,niveauLiquide3=30,tubePenche=-60]}
+\end{pspicture}
+\end{lstlisting}
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Couleurs et styles prédéfinis}\label{sec:pstlabo8:Stile}
+% ---------------------------------------------------------------------------------------
+L'ensemble des couleurs et styles prédéfinis dans l'extension \LPack{pst-labo}
+est présenté ci-dessous. Tous peuvent être modifiés pour les besoins de
+l'utilisateur. 
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\definecolor{Beige}         {rgb}{0.96,0.96,0.86}
+\definecolor{GrisClair}     {rgb}{0.8,0.8,0.8}
+\definecolor{GrisTresClair} {rgb}{0.9,0.9,0.9}
+\definecolor{OrangeTresPale}{cmyk}{0,0.1,0.3,0}
+\definecolor{OrangePale}    {cmyk}{0,0.2,0.4,0}
+\definecolor{BleuClair}     {cmyk}{0.2,0,0,0}
+\definecolor{LightBlue}     {rgb}{.68,.85,.9}
+\definecolor{Copper}        {cmyk}{0,0.9,0.9,0.2}
+\definecolor{Marron}        {cmyk}{0,0.3,0.5,.3}
+%
+\newpsstyle{aspectLiquide1}   {linestyle=none,fillstyle=solid,fillcolor=cyan}
+\newpsstyle{aspectLiquide2}   {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{aspectLiquide3}   {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Champagne}        {linestyle=none,fillstyle=solid,fillcolor=Beige}
+\newpsstyle{BilleThreeD}      {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradend=white,GradientCircle=true}
+\newpsstyle{Sang}             {linestyle=none,fillstyle=solid,fillcolor=red}
+\newpsstyle{Cobalt}           {linewidth=0.2,fillstyle=solid,fillcolor=blue}
+\newpsstyle{Huile}            {linestyle=none,fillstyle=solid,fillcolor=yellow}
+\newpsstyle{Vinaigre}         {linestyle=none,fillstyle=solid,fillcolor=magenta}
+\newpsstyle{Diffusion}        {linestyle=none,fillstyle=gradient,gradmidpoint=0}
+\newpsstyle{DiffusionMelange2}{fillstyle=gradient,gradbegin=white,gradend=red,gradmidpoint=0,linecolor=red}
+\newpsstyle{flammeEtGrille}   {linestyle=none,fillstyle=gradient,gradmidpoint=0,gradbegin=OrangePale,gradend=yellow}
+\newpsstyle{rayuresJaunes}    {fillstyle=hlines,linecolor=yellow,hatchcolor=yellow}
+\newpsstyle{DiffusionBleue}   {fillstyle=gradient,gradmidpoint=0,linestyle=none,gradbegin=green,gradend=cyan}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\section{Macros}\label{sec:pstlabo8:Makros}
+% ---------------------------------------------------------------------------------------
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstTubeEssais}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+Cette commande, déjà présente dans la plupart des exemples, permet de
+représenter les divers types de verrerie rencontrés. Lorsqu'elle est employée
+sans paramètre, un tube à essai est affiché (\verb+glassType=tube+).
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5}
+\pstTubeEssais
+\pstTubeEssais[glassType=becher]
+\pstTubeEssais[glassType=erlen,niveauLiquide1=80]
+\pstTubeEssais[glassType=flacon]
+\pstTubeEssais[glassType=ballon,niveauLiquide1=20,aspectLiquide1=DiffusionBleue]
+\pstTubeEssais[glassType=fioleJauge]
+\end{LTXexample}
+\egroup
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageTube}}\label{sec:pstlabo8:pstChauffageTube}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstChauffageTube} propose plus d'options que la commande
+précédente en permettant notamment le tracé d'un bec Bunsen, d'une pince en
+bois ou d'un tube à dégagement.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5}
+\pstChauffageTube[tubeSeul]
+\pstChauffageTube[glassType=ballon,becBunsen=false,tubeSeul]
+\pstChauffageTube[glassType=erlen,becBunsen,pince,tubeSeul]
+\pstChauffageTube[becBunsen,barbotage,glassType=flacon]
+\pstChauffageTube[becBunsen,tubeCoude,glassType=ballon,niveauLiquide1=20,%
+   aspectLiquide1=DiffusionBleue,tubeSeul,pince]
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstBallon}}\label{sec:pstlabo8:pstBallon}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstBallon} est proche de l'option \Lmcs{pstTubeEssais} mais
+dispose de quelques options supplémentaires.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.3cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{0.5cm}{\pstBallon[refrigerantBoulles=true]}
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstBallon\hspace{-0.5cm}
+\pstBallon[glassType=erlen]\hspace{-0.5cm}
+\pstBallon[glassType=becher,xunit=0.75cm,yunit=0.25cm,aspectLiquide1=Champagne,runit=0.4cm]\hspace{-0.5cm}
+\raisebox{1cm}{\pstBallon[refrigerantBoulles=true]}
+\end{lstlisting}
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstChauffageBallon}}\label{sec:pstlabo8:pstChauffageBallon}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstChauffageBallon} complète la précédente en associant, par
+défaut, un bec Bunsen.
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\egroup
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon
+\pstChauffageBallon[barbotage,tubeCoudeUB,becBunsen,substance=\pstBilles]\\
+\pstChauffageBallon[glassType=flacon,recuperationGaz,tubeRecourbeCourt,substance={\pstFilaments[10]{red}}]
+\pstChauffageBallon[doubletube,recuperationGaz,substance=\pstClouFer]
+\end{lstlisting}
+
+
+
+\begin{center}
+\bgroup
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]\hspace{3cm}
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]\hspace{.25cm}
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\egroup  
+\end{center}
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstChauffageBallon[glassType=erlen,tubeRecourbe,recuperationGaz,substance=\pstTournureCuivre]
+\pstChauffageBallon[glassType=becher,aspectLiquide1=Champagne,substance=\pstBullesChampagne]
+\pstChauffageBallon[glassType=erlen,substance=\pstBullesChampagne,tubeDroit]
+\end{lstlisting}
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEntonnoir}}\label{sec:pstlabo8:pstTubeEssais}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstEntonnoir} place un entonnoir au-dessus de la verrerie
+employée, un tube à essai par défaut. Cette commande accepte tous les
+paramètres disponibles.
+
+\bgroup
+\begin{LTXexample}[pos=t]
+\psset{unit=0.5cm}
+\pstEntonnoir
+\pstEntonnoir[glassType=becher,tubePenche=-20]
+\pstEntonnoir[glassType=flacon,etiquette=true,Numero={\green 37},%
+  aspectLiquide1=DiffusionBleue,niveauLiquide1=80]
+\end{LTXexample}
+\egroup  
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstEprouvette}}\label{sec:pstlabo8:pstEprouvette}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstEprouvette} dessine une éprouvette graduée. Pour ajuster sa
+taille, il suffit de jouer sur les facteurs d'échelle de \PST.
+
+\bgroup
+\begin{LTXexample}
+\pstEprouvette[yunit=0.5cm]
+\pstEprouvette[unit=0.6cm,niveauLiquide1=100,niveauLiquide2=60,niveauLiquide3=30]
+\end{LTXexample}
+\egroup  
+
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstpipette}}\label{sec:pstlabo8:pstpipette}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstpipette} représente une pipette. Là aussi, les facteurs
+d'échelle de \PST permette d'en modifier la dimension.
+
+\bgroup
+\begin{LTXexample}
+\pstpipette[unit=0.5cm,tubePenche=40]
+\pstpipette[yunit=0.5cm]
+\end{LTXexample}
+\egroup  
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDosage}}\label{sec:pstlabo8:pstDosage}
+% ---------------------------------------------------------------------------------------
+L'option \Lmcs{pstDosage} représente un montage classique de dosage. La
+capacité maximale de la burette est de 25~mL. Diverses options contrôlent la
+hauteur de liquide et sa nature. Le montage peut être complété par un
+chauffe-ballon et un pH-mètre (uniquement avec un \verb+becher+).
+
+\bgroup\noindent
+\makebox[\linewidth]{%
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\egroup  
+
+\begin{lstlisting}[xrightmargin=-\marginparwidth]
+\psset{unit=0.5cm}
+\pstDosage
+\pstDosage[glassType=becher,phmetre=true]
+\pstDosage[niveauReactifBurette=10,niveauLiquide1=60,aspectLiquide1=Champagne,%
+  glassType=flacon,agitateurMagnetique=false]
+\pstDosage[glassType=erlen,burette=false]}
+\end{lstlisting}
+
+
+% ---------------------------------------------------------------------------------------
+\subsection{\CMD{pstDistillation}}\label{sec:pstlabo8:pstDistillation}
+% ---------------------------------------------------------------------------------------
+Les seuls paramètres acceptés par la commande \Lmcs{pstDistillation} sont ceux
+de la dimension de l'environnement \Lmenv{pspicture}.
+
+\medskip
+\noindent
+\Lmcs{pstDistillation}\\
+\Lmcs{pstDistillation}\Largr{$x_{ll},y_{ll}$}\Largr{$x_{ur},y_{ur}$} % $
+
+\medskip
+En l'absence de coordonnées optionnelles, la dimension de travail sera
+$(-4,-10)(8,7)$. L'espace important suppose que d'autres objets seront placés,
+à l'aide de la commande \Lmcs{rput},
+
+\bgroup
+\begin{LTXexample}
+\psset{unit=0.5cm}
+\pstDistillation(-3,-10)(7,6)
+\end{LTXexample}
+\egroup  
+
+
+
+
+% ---------------------------------------------------------------------------------------
+\section{Objets de base}\label{sec:pstlabo:Objects}
+% ---------------------------------------------------------------------------------------
+Tous les objets de base de l'extension se trouvent dans le fichier
+\LFile{pst-laboObj.tex}. Par manque de place, ils ne sont pas présentés ici.
+
+
+% ---------------------------------------------------------------------------------------
+\section{Exemples}\label{sec:pstlabo:Beispiele}
+% ---------------------------------------------------------------------------------------
+La création d'exemples complexes est grandement facilitée par l'utilisation
+d'une grille de référence (\Lmcs{psgrid}).
+
+\begin{figure}
+\centering
+\bgroup
+\sffamily
+\begin{pspicture}(0,-4)(7,4)
+  \rput(3,0){\pstDosage[niveauReactifBurette=25,niveauLiquide1=30,%
+    aspectLiquide1=Champagne,glassType=becher,phmetre,unit=0.5]}
+  \rput(2,3){Burette}   
+  \rput(4.7,3.6){25 mL}
+  \rput(5.2,-2.2){H$_3$O$^+$+Cl$^-$}
+  \rput(.8,-3){pH-mètre} 
+  \rput(5,-2.8){20 mL}
+  \rput(5,1){Na$^+$+OH$^-$} \rput(6.4,-3.6){Plaque chauffante}
+  \psline{->}(2.7,2.9)(3.4,2.9)
+\end{pspicture}
+\begin{pspicture}(-3,-2)(2,3)
+  \psset{unit=0.5cm}
+  \rput(-4.5,4.0){\pstEprouvette[tubePenche=-60,niveauLiquide1=90,niveauLiquide2=50]}
+  \rput(.5,0){\pstEntonnoir[glassType=flacon,niveauLiquide1=30]}
+  \rput(.5,7.5){
+    \framebox{\begin{minipage}{3.2cm}Après la décantation, les différentes
+        phases sont séparées et la dernière est filtrée.
+    \end{minipage}}}
+\end{pspicture}
+\egroup
+\caption{Exemple d'utilisation de \Lmcs{pstDosage}}
+\end{figure}
+
+
+\begin{figure}
+\centering
+\bgroup
+\psset{unit=0.5cm,etiquette}
+\newpsstyle{Nickel}{fillstyle=solid,fillcolor=green}
+\pstTubeEssais[niveauLiquide1=20,aspectLiquide1=Champagne,Numero=1]\kern-20pt
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Cobalt,Numero=2]\kern-20pt
+\pstTubeEssais[niveauLiquide1=40,aspectLiquide1=Sang,Numero=3]\kern-20pt
+\pstTubeEssais[Numero=4]\kern-20pt
+\psset{bouchon,glassType=flacon}
+\pstTubeEssais[aspectLiquide1=Vinaigre,Numero={\footnotesize MnO$_4^-$}]
+\pstTubeEssais[aspectLiquide1=Huile,unit=0.75,Numero={\footnotesize Ce$^{4+}$}]
+\pstTubeEssais[aspectLiquide1=Nickel,Numero={\footnotesize Ni$^{2+}$}]
+\pstTubeEssais[Numero={\footnotesize Cu$^{2+}$}]
+\pstTubeEssais[niveauLiquide1=30,aspectLiquide1=Champagne,Numero={\footnotesize NaOH},unit=0.75]
+\egroup  
+\caption{Exemple d'utilisation de \Lmcs{pstTubeEssais}}
+\end{figure}
+
+
+\nocite{*}
+\bibliographystyle{plain}
+\bibliography{pst-labo-doc}
+
+
+\endinput
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-DE.tex b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-DE.tex
new file mode 100644
index 00000000000..baa18da9ac0
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-DE.tex
@@ -0,0 +1,63 @@
+\setlongtables
+\begin{longtable}{@{}>{\ttfamily}l@{}>{\ttfamily}l>{\ttfamily}l>{\RaggedRight\arraybackslash}X@{}}
+\caption{Zusammenfassung aller Parameter für \texttt{pst-labo}}\label{tab:pst-labo:Parameter}\\
+\emph{\textrm{Name}} & \emph{\textrm{Werte}}  & \emph{\textrm{Vorgabe}} & \emph{Anmerkungen}\\\hline
+\endfirsthead
+\emph{\textrm{Name}} & \emph{\textrm{Werte}}  & \emph{\textrm{Vorgabe}} & \emph{Anmerkungen}\\\hline
+\endhead
+%\multicolumn{3}{c}{\CMD{TubeEssais}}\\\hline
+
+\Loption{glassType} & tube|ballon| &  tube & bezeichnet den Typ des \\
+                    & becher|erlen|&       &  Glasgefäßes\\
+                    & \rlap{flacon|fioleJauge} \\
+\Loption{bouchon} & \Larga{false|true} & false & Gefäß wird mit einem Korken versehen.\\
+\Loption{pince} & \Larga{false|true} & false & Holzklammer\\
+%\Loption{fioleJaugee} & \Larga{false|true} & false&\\
+\Loption{tubeDroit} & \Larga{false|true} & false & Glasröhrchen\\
+\Loption{tubeCoude} & \Larga{false|true} & false & abgewinkeltes Glasröhrchen\\ 
+\Loption{tubeCoudeU} & \Larga{false|true} & false& doppelt abgewinkeltes Glasröhrchen\\
+\Loption{tubeCoudeUB} & \Larga{false|true} & false & verlängerte Ausführung, nur für den 
+						    Glastyp \verb+ballon+ oder \verb+erlen+\\
+\Loption{tubeRecourbe} & \Larga{false|true} & false & \\
+\Loption{tubeRecourbeCourt} & \Larga{false|true} & false & Anordnung ohne Bunsenbrenner\\
+\Loption{tubePenche} & \Larga{$-65 \ldots 65$} & 0 & Kippwinkel\\
+\Loption{doubletube} & \Larga{false|true} & false & pour dégagement gazeux sans chauffage\\
+%
+\Loption{etiquette} & \Larga{false|true} & false & \\
+\Loption{Numero} & \Larga{Text} & \{\} & Nummer für die Option \verb+etiquette+\\
+%\multicolumn{3}{c}{\CMD{ChauffeTube}}\\\hline
+\Loption{tubeSeul} & \Larga{false|true} & false & breite/schmale \verb+pspicture+-Box\\
+\Loption{becBunsen} & \Larga{false|true} & true & mit/ohne Bunsenbrenner\\
+%\Loption{tubedegagamentDroit} & \Larga{false|true} &false&\\% nicht vorhanden
+\Loption{barbotage} & \Larga{false|true} & false & zusätzliches Reagenzglas, durch Glasröhrchen mit dem
+                                                   eigentlichen Gefäß verbunden\\
+\Loption{substance}      & \Larga{Makro} & \CMD{relax} & \CMD{pstBullesChampagne}, \CMD{pstFilaments}, 
+                                              \CMD{pstBilles}, \CMD{pstBULLES}, \CMD{pstClous}, \CMD{pstCuivre}\\
+\Loption{solide}         & \Larga{Makro} & \CMD{relax} & \CMD{pstTournureCuivre}, \CMD{pstClouFer}, 
+                                              \CMD{pstGrenailleZinc}\\
+\Loption{refrigerantBoulle} & \Larga{false|true} & false & pour  chauffage à reflux\\
+\Loption{recuperationGaz} & \Larga{false|true} & false & Anordnung zum Auffangen entwichener Gase\\
+%
+%\Loption{reactifBecher} & \{\} & bécher ou ballon ou flacon\\\hline
+%\Loption{reactifBurette} & \{\} &Formule et/ou concentration du réactif\\
+\rlap{\Loption{couleurReactifBurette}}\\
+                  & \Larga{Farbe} & \rlap{OrangePale} & \\
+\rlap{\Loption{niveauReactifBurette}}\\
+                  & 20 & \Larga{$0\ldots 25$} & Begrenzung auf 25mL\\
+%\Loption{echelle} & \Larga{Wert} & 1 & echelle du schéma\\
+\Loption{AspectMelange} & \Larga{Stil} & \rlap{DiffusionBleue}\\
+\Loption{CouleurDistillat} & \Larga{Farbe} & yellow & \\
+%
+\Loption{phmetre} & \Larga{false|true} & false & pHMesser anzeigen\\
+\rlap{\Loption{agitateurMagnetique}}\\
+                                    & \Larga{false|true} & true & \\
+%
+\Loption{aspectLiquide1} & \Larga{Stil} & cyan & definiert als Teil von \CMD{newpsstyle}\ldots\\
+\Loption{aspectLiquide2} & \Larga{Stil} & yellow & dito\\
+\Loption{aspectLiquide3} & \Larga{Stil} & magenta & dito\\
+\Loption{niveauLiquide1} & \Larga{$0 \ldots 100$} & 50 &\\
+\Loption{niveauliquide2} & \Larga{$0 \ldots 100$} & 0  & < niveauLiquide1\\
+\Loption{niveauliquide3} & \Larga{$0 \ldots 100$} & 0 &  < niveauLiquide2\\
+\end{longtable}
+
+
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-EN.tex b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-EN.tex
new file mode 100644
index 00000000000..d2865ea0364
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-EN.tex
@@ -0,0 +1,63 @@
+%	$Id: pstlabo8-tab1-EN.tex,v 1.2 2005/10/10 21:32:42 patrick Exp patrick $	
+\setlongtables
+\begin{longtable}{@{}>{\ttfamily}l@{}>{\ttfamily}l>{\ttfamily}l>{\RaggedRight\arraybackslash}X@{}}
+\caption{Summary of all parameters available with \texttt{pst-labo}}\label{tab:pst-labo:Parameter} \\
+\emph{\textrm{Name}} & \emph{\textrm{values}} & \emph{\textrm{default}} & \emph{comments}     \\\hline
+\endfirsthead
+\emph{\textrm{Name}} & \emph{\textrm{values}} & \emph{\textrm{default}} & \emph{comments}     \\\hline
+\endhead
+%\multicolumn{3}{c}{\CMD{TubeEssais}}                                                         \\\hline
+
+\Loption{glassType} & tube|ballon| &  tube & defines type of glass  \\
+                    & becher|erlen|&       &  cylinder\\
+                    & \rlap{flacon|fioleJauge} \\
+\Loption{bouchon} & \Larga{false|true} & false & Container is sealed with a plug.\\
+\Loption{pince} & \Larga{false|true} & false & wooden clamp\\
+%\Loption{fioleJaugee} & \Larga{false|true} & false&\\
+\Loption{tubeDroit} & \Larga{false|true} & false & glass tube\\
+\Loption{tubeCoude} & \Larga{false|true} & false & glass tube with 90 degree twist\\
+\Loption{tubeCoudeU} & \Larga{false|true} & false& U-shaped glass tube\\
+\Loption{tubeCoudeUB} & \Larga{false|true} & false & extended version, %
+only applies to glass containers of type  \verb+ballon+ and \verb+erlen+\\
+\Loption{tubeRecourbe} & \Larga{false|true} & false & \\
+\Loption{tubeRecourbeCourt} & \Larga{false|true} & false & setup without Bunsen burner\\
+\Loption{tubePenche} & \Larga{$-65 \ldots 65$} & 0 & tilting angle\\
+\Loption{doubletube} & \Larga{false|true} & false & pour dégagement gazeux sans chauffage\\%TODO
+%
+\Loption{etiquette} & \Larga{false|true} & false & \\
+\Loption{Numero} & \Larga{Text} & \{\} & number for the option \verb+etiquette+\\
+%\multicolumn{3}{c}{\CMD{ChauffeTube}}\\\hline
+\Loption{tubeSeul} & \Larga{false|true} & false & wide/narrow \verb+pspicture+ box\\
+\Loption{becBunsen} & \Larga{false|true} & true & with/without Bunsen burner\\
+%\Loption{tubedegagamentDroit} & \Larga{false|true} &false&\\% nicht vorhanden
+\Loption{barbotage} & \Larga{false|true} & false & attaches an additional glass tube to the original glass container\\
+\Loption{substance}      & \Larga{Makro} & \CMD{relax} & \CMD{pstBullesChampagne}, \CMD{pstFilaments}, 
+                                              \CMD{pstBilles}, \CMD{pstBULLES}, \CMD{pstClous}, \CMD{pstCuivre}\\
+\Loption{solide}         & \Larga{Makro} & \CMD{relax} & \CMD{pstTournureCuivre}, \CMD{pstClouFer}, 
+                                              \CMD{pstGrenailleZinc}\\
+\Loption{refrigerantBoulle} & \Larga{false|true} & false & pour  chauffage à reflux\\%TODO
+\Loption{recuperationGaz} & \Larga{false|true} & false & setup for collecting gas\\
+%
+%\Loption{reactifBecher} & \{\} & bécher ou ballon ou flacon\\\hline
+%\Loption{reactifBurette} & \{\} &Formule et/ou concentration du réactif\\
+\rlap{\Loption{couleurReactifBurette}}\\
+                  & \Larga{Farbe} & \rlap{OrangePale} & \\
+\rlap{\Loption{niveauReactifBurette}}\\
+                  & 20 & \Larga{$0\ldots 25$} & restriction of 25mL\\
+%\Loption{echelle} & \Larga{value} & 1 & echelle du schéma\\
+\Loption{AspectMelange} & \Larga{Stil} & \rlap{DiffusionBleue}\\
+\Loption{CouleurDistillat} & \Larga{Farbe} & yellow & \\
+%
+\Loption{phmetre} & \Larga{false|true} & false & display pH-meter\\
+\rlap{\Loption{agitateurMagnetique}}\\
+                                    & \Larga{false|true} & true & \\
+%
+\Loption{aspectLiquide1} & \Larga{Stil} & cyan & defined as part of \CMD{newpsstyle}\ldots\\
+\Loption{aspectLiquide2} & \Larga{Stil} & yellow & dito\\
+\Loption{aspectLiquide3} & \Larga{Stil} & magenta & dito\\
+\Loption{niveauLiquide1} & \Larga{$0 \ldots 100$} & 50 &\\
+\Loption{niveauliquide2} & \Larga{$0 \ldots 100$} & 0  & < niveauLiquide1\\
+\Loption{niveauliquide3} & \Larga{$0 \ldots 100$} & 0 &  < niveauLiquide2\\
+\end{longtable}
+
+
diff --git a/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-FR.tex b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-FR.tex
new file mode 100644
index 00000000000..68c1f7d8def
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-labo/pstlabo8-tab1-FR.tex
@@ -0,0 +1,68 @@
+\setlongtables
+\begin{longtable}{@{}>{\ttfamily}l@{}>{\ttfamily}l>{\ttfamily}l>{\RaggedRight\arraybackslash}X@{}}
+\caption{Résumé des paramètres de l'extension \texttt{pst-labo}}\label{tab:pst-labo:Parameter}\\
+\emph{\textrm{Nom}} & \emph{\textrm{Valeur}}  & \emph{\textrm{Défaut}} & \emph{Commentaire}\\\hline
+\endfirsthead
+\emph{\textrm{Nom}} & \emph{\textrm{Valeur}}  & \emph{\textrm{Défaut}} & \emph{Commentaire}\\\hline
+\endhead
+%\multicolumn{3}{c}{\CMD{TubeEssais}}\\\hline
+
+\Loption{glassType} & tube|ballon| &  tube & Définit le type de \\
+                    & becher|erlen|&       & verrerie\\
+                    & \rlap{flacon|fioleJauge} \\
+\Loption{bouchon} & \Larga{false|true} & false & Ferme la verrerie par un bouchon\\
+\Loption{pince} & \Larga{false|true} & false & Pince en bois\\
+%\Loption{fioleJaugee} & \Larga{false|true} & false&\\
+\Loption{tubeDroit} & \Larga{false|true} & false & Réfrigérant à air\\
+\Loption{tubeCoude} & \Larga{false|true} & false & Tube coudé à $90^\circ$\\ 
+\Loption{tubeCoudeU} & \Larga{false|true} & false& Tube en U\\
+\Loption{tubeCoudeUB} & \Larga{false|true} & false & Tube en U à associer
+uniquement à la verrerie de type \verb+ballon+ ou \verb+erlen+\\
+\Loption{tubeRecourbe} & \Larga{false|true} & false & \\
+\Loption{tubeRecourbeCourt} & \Larga{false|true} & false & Lorsqu'il n'y a pas
+de bec Bunsen\\
+\Loption{tubePenche} & \Larga{$-65 \ldots 65$} & 0 & Angle d'inclinaison\\
+\Loption{doubletube} & \Larga{false|true} & false & Pour le dégagement gazeux
+sans chauffage\\ 
+%
+\Loption{etiquette} & \Larga{false|true} & false & \\
+\Loption{Numero} & \Larga{Text} & \{\} & Numéro placé sur l'étiquette (voir l'option \verb+etiquette+)\\
+%\multicolumn{3}{c}{\CMD{ChauffeTube}}\\\hline
+\Loption{tubeSeul} & \Larga{false|true} & false & Environnement
+\verb+pspicture+ large ou étroit\\
+\Loption{becBunsen} & \Larga{false|true} & true & Avec ou sans bec Bunsen\\
+%\Loption{tubedegagamentDroit} & \Larga{false|true} &false&\\% nicht vorhanden
+\Loption{barbotage} & \Larga{false|true} & false & Place un tube à essai
+secondaire pour récupérer les dégagements gazeux.\\
+\Loption{substance}      & \Larga{Macro} & \CMD{relax} & \CMD{pstBullesChampagne}, \CMD{pstFilaments}, 
+                                              \CMD{pstBilles}, \CMD{pstBULLES}, \CMD{pstClous}, \CMD{pstCuivre}\\
+\Loption{solide}         & \Larga{Macro} & \CMD{relax} & \CMD{pstTournureCuivre}, \CMD{pstClouFer}, 
+                                              \CMD{pstGrenailleZinc}\\
+\Loption{refrigerantBoulle} & \Larga{false|true} & false & Pour le chauffage à reflux\\
+\Loption{recuperationGaz} & \Larga{false|true} & false & Dispositif de
+récupération des gaz\\
+%
+%\Loption{reactifBecher} & \{\} & bécher ou ballon ou flacon\\\hline
+%\Loption{reactifBurette} & \{\} &Formule et/ou concentration du réactif\\
+\rlap{\Loption{couleurReactifBurette}}\\
+                  & \Larga{Couleur} & \rlap{OrangePale} & \\
+\rlap{\Loption{niveauReactifBurette}}\\
+                  & 20 & \Larga{$0\ldots 25$} & 25~mL maximum\\
+%\Loption{echelle} & \Larga{Wert} & 1 & echelle du schéma\\
+\Loption{AspectMelange} & \Larga{Style} & \rlap{DiffusionBleue}\\
+\Loption{CouleurDistillat} & \Larga{Couleur} & yellow & \\
+%
+\Loption{phmetre} & \Larga{false|true} & false & Place un pH-mètre\\
+\rlap{\Loption{agitateurMagnetique}}\\
+                                    & \Larga{false|true} & true & \\
+%
+\Loption{aspectLiquide1} & \Larga{Style} & cyan & Défini par la commande
+\CMD{newpsstyle}\\ 
+\Loption{aspectLiquide2} & \Larga{Style} & yellow & \emph{idem}\\
+\Loption{aspectLiquide3} & \Larga{Style} & magenta & \emph{idem}\\
+\Loption{niveauLiquide1} & \Larga{$0 \ldots 100$} & 50 &\\
+\Loption{niveauliquide2} & \Larga{$0 \ldots 100$} & 0  & < niveauLiquide1\\
+\Loption{niveauliquide3} & \Larga{$0 \ldots 100$} & 0 &  < niveauLiquide2\\
+\end{longtable}
+
+