biblatex 0.9a (19mar10)

git-svn-id: svn://tug.org/texlive/trunk@17511 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 730 insertions, 5 deletions

diff --git a/Master/texmf-dist/bibtex/csf/biblatex/latin1_fi.csf b/Master/texmf-dist/bibtex/csf/biblatex/latin1_fi.csf
new file mode 100644
index 00000000000..0d2942bca25
--- /dev/null
+++ b/Master/texmf-dist/bibtex/csf/biblatex/latin1_fi.csf
@@ -0,0 +1,240 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% CHARACTER SET: ISO 8859-1 (Latin 1)
+%
+%      ISO 8859-1 is the system character set used by Unix/X Windows and
+%      MS Windows.
+%
+% SORTING ORDER: Finnish
+%
+%      Alphabetical sorting order of Aa..Zz (including accented characters).
+%
+%      This is a BibTeX Codepage and Sort definition file (CSF).  It is
+%      used to define the 8-bit character set used by BibTeX and the
+%      order in which those characters should be sorted.  The file
+%      format is documented below this header section.
+%
+%      This file will only work with the 8-bit implementation of BibTeX
+%      written by Niel Kempson and Alejandro Aguilar-Sierra:
+%
+%      http://www.ctan.org/tex-archive/biblio/bibtex/8-bit/
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% FILE FORMAT
+%
+%  The codepage and sorting order (CS) file defines how BibTeX will treat an
+%  8-bit character set, specifically which characters are to be treated as
+%  letters, the upper/lower case relationships between characters, and the
+%  sorting order of characters.
+%
+%  The CS file may contain a number of sections, each presented in the
+%  form of a TeX macro:
+%
+%      \section-name{
+%          <section definitions>
+%      }
+%
+%  Four sections are currently supported: \lowupcase, \lowercase, \uppercase
+%  and \order.  The syntax of the four supported sections is summarised below.
+%
+%  8-bit characters may be entered naturally, but to avoid problems with
+%  character set translation or corruption, they can also be entered using
+%  the TeX-style portable notation for character codes, i.e. ^^XX, where XX
+%  is the hexadecimal value ofthe character code.
+%
+%  Reading of the sections ends when the first '}' character is reached, so
+%  '}' can't be included in a section.  You can't use ^^7d either.
+%
+%  The percent sign ('%') is used to introduce a trailing comment - it and
+%  all remaining characters on a line are ignored.  ^^25 has the same effect.
+%
+%
+%  \lowupcase section
+%
+%      The \lowupcase section of the CS file is used to define the lower
+%      /upper and upper/lower case relationship of pairs of specified
+%      characters.  It is only used if the relationship is symmetrical - use
+%      \lowercase or \upcase if it isn't.
+%
+%      The syntax of the \lowupcase section is:
+%
+%          \lowupcase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      equivalent of <LC-n> is <UC-n> *and* the lower case equivalent of
+%      <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower or upper case equivalent of an ASCII
+%      character (code < 128), so all instances of <LC-n> and <UC-n>
+%      (i.e. both sides of the relationship) must have codes > 127.
+%
+%
+% \lowercase section
+%
+%      The \lowercase section of the CS file is used to define the lower case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \lowercase section is:
+%
+%          \lowercase{
+%              <UC-1> <LC-1>   % Comment begins with a percent sign
+%              <UC-2> <LC-2>
+%              ...
+%              <UC-N> <LC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the lower case
+%      equivalent of <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower case equivalent of an ASCII character
+%      (code < 128), so all instances of <UC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+% \uppercase section
+%
+%      The \uppercase section of the CS file is used to define the upper case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \uppercase section is:
+%
+%          \uppercase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      case equivalent of <LC-n> is <UC-n>.
+%
+%      You cannot redefine the upper case equivalent of an ASCII character
+%      (code < 128), so all instances of <LC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+%  \order section
+%
+%      The \order section of the CS file is used to define the order in which
+%      characters are sorted.
+%
+%      The syntax of the \order section is:
+%
+%          \order{
+%              <char-1>                % Comment begins with a percent sign
+%              <char-2> <char-3>       % whitespace between the chars
+%              <char-4> - <char-5>     % a hyphen between the chars
+%              <char-4> _ <char-5>     % an underscore between the chars
+%              ...
+%              <char-n>
+%          }
+%
+%      All characters on the same line are given the same sorting weight.
+%
+%      The construct <char-1> <underscore> <char-2> is used to denote that
+%      all characters in the range <char-1> to <char-2> should be given the
+%      same sorting weight.  For example, "A _ Z" would cause all ASCII
+%      upper case alphabetical characters to have the same sorting weight
+%      and would be equivalent to placing all 26 characters on the same line.
+%
+%      The construct <char-1> <hyphen> <char-2> is used to denote that all
+%      characters in the range <char-1> to <char-2> should be given an
+%      ascending set of sorting weights, starting with <char-1> and ending
+%      with <char-2>.  For example, "A - Z" would cause all upper case ASCII
+%      alphabetical characters to be sorted in ascending order and would be
+%      equivalent to placing 'A' on the first line, 'B' on the second,
+%      through to 'Z' on the 26th line.
+%
+%      The characters at the beginning of the order section are given a lower
+%      sorting weight than characters occuring later.  When sorting
+%      alphabetically, characters with the lowest weight come first.
+%
+%      All characters not in the \order section (including ASCII characters)
+%      are given the same very high sorting weight to ensure that they come
+%      last when sorting alphabetically.
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% CHARACTER SET
+
+\lowupcase{     %     Lowercase           Uppercase
+                %   Code    TeX         Code    TeX
+                %
+    à À         %   ^^e0    \`{a}       ^^c0    \`{A}
+    á Á         %   ^^e1    \'{a}       ^^c1    \'{A}
+    â Â         %   ^^e2    \^{a}       ^^c2    \^{A}
+    ã Ã         %   ^^e3    \~{a}       ^^c3    \~{A}
+    ä Ä         %   ^^e4    \"{a}       ^^c4    \"{A}
+    å Å         %   ^^e5    \aa         ^^c5    \AA
+    æ Æ         %   ^^e6    \ae         ^^c6    \AE
+    ç Ç         %   ^^e7    \c{c}       ^^c7    \c{C}
+    è È         %   ^^e8    \`{e}       ^^c8    \`{E}
+    é É         %   ^^e9    \'{e}       ^^c9    \'{E}
+    ê Ê         %   ^^ea    \^{e}       ^^ca    \^{E}
+    ë Ë         %   ^^eb    \"{e}       ^^cb    \"{E}
+    ì Ì         %   ^^ec    \`{\i}      ^^cc    \`{I}
+    í Í         %   ^^ed    \'{\i}      ^^cd    \'{I}
+    î Î         %   ^^ee    \^{\i}      ^^ce    \^{I}
+    ï Ï         %   ^^ef    \"{\i}      ^^cf    \"{I}
+    ð Ð         %   ^^f0    \dh         ^^d0    \DH
+    ñ Ñ         %   ^^f1    \~{n}       ^^d1    \~{N}
+    ò Ò         %   ^^f2    \`{o}       ^^d2    \`{O}
+    ó Ó         %   ^^f3    \'{o}       ^^d3    \'{O}
+    ô Ô         %   ^^f4    \^{o}       ^^d4    \^{O}
+    õ Õ         %   ^^f5    \~{o}       ^^d5    \~{O}
+    ö Ö         %   ^^f6    \"{o}       ^^d6    \"{O}
+    ø Ø         %   ^^f8    \o          ^^d8    \O
+    ù Ù         %   ^^f9    \`{u}       ^^d9    \`{U}
+    ú Ú         %   ^^fa    \'{u}       ^^da    \'{U}
+    û Û         %   ^^fb    \^{u}       ^^db    \^{U}
+    ü Ü         %   ^^fc    \"{u}       ^^dc    \"{U}
+    ý Ý         %   ^^fd    \'{y}       ^^dd    \'{Y}
+    þ Þ         %   ^^fe    \th         ^^de    \TH
+}
+
+% SORTING ORDER
+
+\order{
+    0-9
+    A À Á Â Ã Å Ä Æ a à á â ã å ä æ
+    B b
+    C Ç c ç
+    D Ð d ð
+    E È É Ê Ë e è é ê ë
+    F f
+    G g
+    H h
+    I Ì Í Î Ï i ì í î ï
+    J j
+    K k
+    L l
+    M m
+    N Ñ n ñ
+    O Ò Ó Ô o ò ó ô
+    P p
+    Q q
+    R r 
+    S s ß
+    T Þ t þ
+    U Ù Ú Û u ù ú û
+    V v 
+    W w
+    X x 
+    Y Ý Ü y ý ÿ ü
+    Z z
+    Å å
+    Ä ä
+    Ö Õ Ø ö õ ø
+}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% END OF FILE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/Master/texmf-dist/bibtex/csf/biblatex/latin9_fi.csf b/Master/texmf-dist/bibtex/csf/biblatex/latin9_fi.csf
new file mode 100644
index 00000000000..d4f166559df
--- /dev/null
+++ b/Master/texmf-dist/bibtex/csf/biblatex/latin9_fi.csf
@@ -0,0 +1,243 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% CHARACTER SET: ISO 8859-15 (Latin 9)
+%
+%      ISO 8859-15 is a character set used by Unix/X Windows.
+%
+% SORTING ORDER: Finnish
+%
+%      Alphabetical sorting order of Aa..Zz (including accented characters).
+%
+%      This is a BibTeX Codepage and Sort definition file (CSF).  It is
+%      used to define the 8-bit character set used by BibTeX and the
+%      order in which those characters should be sorted.  The file
+%      format is documented below this header section.
+%
+%      This file will only work with the 8-bit implementation of BibTeX
+%      written by Niel Kempson and Alejandro Aguilar-Sierra:
+%
+%      http://www.ctan.org/tex-archive/biblio/bibtex/8-bit/
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% FILE FORMAT
+%
+%  The codepage and sorting order (CS) file defines how BibTeX will treat an
+%  8-bit character set, specifically which characters are to be treated as
+%  letters, the upper/lower case relationships between characters, and the
+%  sorting order of characters.
+%
+%  The CS file may contain a number of sections, each presented in the
+%  form of a TeX macro:
+%
+%      \section-name{
+%          <section definitions>
+%      }
+%
+%  Four sections are currently supported: \lowupcase, \lowercase, \uppercase
+%  and \order.  The syntax of the four supported sections is summarised below.
+%
+%  8-bit characters may be entered naturally, but to avoid problems with
+%  character set translation or corruption, they can also be entered using
+%  the TeX-style portable notation for character codes, i.e. ^^XX, where XX
+%  is the hexadecimal value ofthe character code.
+%
+%  Reading of the sections ends when the first '}' character is reached, so
+%  '}' can't be included in a section.  You can't use ^^7d either.
+%
+%  The percent sign ('%') is used to introduce a trailing comment - it and
+%  all remaining characters on a line are ignored.  ^^25 has the same effect.
+%
+%
+%  \lowupcase section
+%
+%      The \lowupcase section of the CS file is used to define the lower
+%      /upper and upper/lower case relationship of pairs of specified
+%      characters.  It is only used if the relationship is symmetrical - use
+%      \lowercase or \upcase if it isn't.
+%
+%      The syntax of the \lowupcase section is:
+%
+%          \lowupcase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      equivalent of <LC-n> is <UC-n> *and* the lower case equivalent of
+%      <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower or upper case equivalent of an ASCII
+%      character (code < 128), so all instances of <LC-n> and <UC-n>
+%      (i.e. both sides of the relationship) must have codes > 127.
+%
+%
+% \lowercase section
+%
+%      The \lowercase section of the CS file is used to define the lower case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \lowercase section is:
+%
+%          \lowercase{
+%              <UC-1> <LC-1>   % Comment begins with a percent sign
+%              <UC-2> <LC-2>
+%              ...
+%              <UC-N> <LC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the lower case
+%      equivalent of <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower case equivalent of an ASCII character
+%      (code < 128), so all instances of <UC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+% \uppercase section
+%
+%      The \uppercase section of the CS file is used to define the upper case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \uppercase section is:
+%
+%          \uppercase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      case equivalent of <LC-n> is <UC-n>.
+%
+%      You cannot redefine the upper case equivalent of an ASCII character
+%      (code < 128), so all instances of <LC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+%  \order section
+%
+%      The \order section of the CS file is used to define the order in which
+%      characters are sorted.
+%
+%      The syntax of the \order section is:
+%
+%          \order{
+%              <char-1>                % Comment begins with a percent sign
+%              <char-2> <char-3>       % whitespace between the chars
+%              <char-4> - <char-5>     % a hyphen between the chars
+%              <char-4> _ <char-5>     % an underscore between the chars
+%              ...
+%              <char-n>
+%          }
+%
+%      All characters on the same line are given the same sorting weight.
+%
+%      The construct <char-1> <underscore> <char-2> is used to denote that
+%      all characters in the range <char-1> to <char-2> should be given the
+%      same sorting weight.  For example, "A _ Z" would cause all ASCII
+%      upper case alphabetical characters to have the same sorting weight
+%      and would be equivalent to placing all 26 characters on the same line.
+%
+%      The construct <char-1> <hyphen> <char-2> is used to denote that all
+%      characters in the range <char-1> to <char-2> should be given an
+%      ascending set of sorting weights, starting with <char-1> and ending
+%      with <char-2>.  For example, "A - Z" would cause all upper case ASCII
+%      alphabetical characters to be sorted in ascending order and would be
+%      equivalent to placing 'A' on the first line, 'B' on the second,
+%      through to 'Z' on the 26th line.
+%
+%      The characters at the beginning of the order section are given a lower
+%      sorting weight than characters occuring later.  When sorting
+%      alphabetically, characters with the lowest weight come first.
+%
+%      All characters not in the \order section (including ASCII characters)
+%      are given the same very high sorting weight to ensure that they come
+%      last when sorting alphabetically.
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% CHARACTER SET
+
+\lowupcase{     %     Lowercase           Uppercase
+                %   Code    TeX         Code    TeX
+                %
+    ¨ ¦         %   ^^a8    \v{\s}      ^^a6    \v{S}
+    ¸ ´         %   ^^b8    \v{\z}      ^^b4    \v{Z}
+    ½ ¼         %   ^^bd    \oe         ^^bc    \OE
+    à À         %   ^^e0    \`{a}       ^^c0    \`{A}
+    á Á         %   ^^e1    \'{a}       ^^c1    \'{A}
+    â Â         %   ^^e2    \^{a}       ^^c2    \^{A}
+    ã Ã         %   ^^e3    \~{a}       ^^c3    \~{A}
+    ä Ä         %   ^^e4    \"{a}       ^^c4    \"{A}
+    å Å         %   ^^e5    \aa         ^^c5    \AA
+    æ Æ         %   ^^e6    \ae         ^^c6    \AE
+    ç Ç         %   ^^e7    \c{c}       ^^c7    \c{C}
+    è È         %   ^^e8    \`{e}       ^^c8    \`{E}
+    é É         %   ^^e9    \'{e}       ^^c9    \'{E}
+    ê Ê         %   ^^ea    \^{e}       ^^ca    \^{E}
+    ë Ë         %   ^^eb    \"{e}       ^^cb    \"{E}
+    ì Ì         %   ^^ec    \`{\i}      ^^cc    \`{I}
+    í Í         %   ^^ed    \'{\i}      ^^cd    \'{I}
+    î Î         %   ^^ee    \^{\i}      ^^ce    \^{I}
+    ï Ï         %   ^^ef    \"{\i}      ^^cf    \"{I}
+    ð Ð         %   ^^f0    \dh         ^^d0    \DH
+    ñ Ñ         %   ^^f1    \~{n}       ^^d1    \~{N}
+    ò Ò         %   ^^f2    \`{o}       ^^d2    \`{O}
+    ó Ó         %   ^^f3    \'{o}       ^^d3    \'{O}
+    ô Ô         %   ^^f4    \^{o}       ^^d4    \^{O}
+    õ Õ         %   ^^f5    \~{o}       ^^d5    \~{O}
+    ö Ö         %   ^^f6    \"{o}       ^^d6    \"{O}
+    ø Ø         %   ^^f8    \o          ^^d8    \O
+    ù Ù         %   ^^f9    \`{u}       ^^d9    \`{U}
+    ú Ú         %   ^^fa    \'{u}       ^^da    \'{U}
+    û Û         %   ^^fb    \^{u}       ^^db    \^{U}
+    ü Ü         %   ^^fc    \"{u}       ^^dc    \"{U}
+    ý Ý         %   ^^fd    \'{y}       ^^dd    \'{Y}
+    þ Þ         %   ^^fe    \th         ^^de    \TH
+    ÿ ¾         %   ^^ff    \"{y}       ^^be    \"{Y}
+}
+
+% SORTING ORDER
+
+\order{
+    0-9
+    A À Á Â Ã Å Ä Æ a à á â ã å ä æ
+    B b
+    C Ç c ç
+    D Ð d ð
+    E È É Ê Ë e è é ê ë
+    F f
+    G g
+    H h
+    I Ì Í Î Ï i ì í î ï
+    J j
+    K k
+    L l
+    M m
+    N Ñ n ñ
+    O Ò Ó Ô ¼ o ò ó ô ½
+    P p
+    Q q
+    R r
+    S ¦ s ¨ ß
+    T Þ t þ
+    U Ù Ú Û u ù ú û
+    V v
+    W w
+    X x
+    Y Ý ¾ Ü y ý ÿ ü
+    Z ´ z ¸
+    Å å
+    Ä ä
+    Ö Õ Ø ö õ ø
+}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% END OF FILE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/Master/texmf-dist/bibtex/csf/biblatex/winansi_de.csf b/Master/texmf-dist/bibtex/csf/biblatex/winansi_de.csf
index 9aa940e1e15..3a6c7cba64a 100644
--- a/Master/texmf-dist/bibtex/csf/biblatex/winansi_de.csf
+++ b/Master/texmf-dist/bibtex/csf/biblatex/winansi_de.csf
@@ -169,9 +169,9 @@
 \lowupcase{     %     Lowercase           Uppercase
                 %   Code    TeX         Code    TeX
                 %
-    š Š         %   ^^9a    \v{\s}      ^^8a    \v{S}
-    œ Œ         %   ^^9c    \oe         ^^8c    \OE
-    ž Ž         %   ^^9e    \v{\z}      ^^8e    \v{Z}
+      š Š         %   ^^9a    \v{\s}      ^^8a    \v{S}
+      œ Œ         %   ^^9c    \oe         ^^8c    \OE
+      ž Ž         %   ^^9e    \v{\z}      ^^8e    \v{Z}
     à À         %   ^^e0    \`{a}       ^^c0    \`{A}
     á Á         %   ^^e1    \'{a}       ^^c1    \'{A}
     â Â         %   ^^e2    \^{a}       ^^c2    \^{A}
@@ -202,8 +202,7 @@
     ü Ü         %   ^^fc    \"{u}       ^^dc    \"{U}
     ý Ý         %   ^^fd    \'{y}       ^^dd    \'{Y}
     þ Þ         %   ^^fe    \th         ^^de    \TH
-    ÿ Ÿ         %   ^^ff    \"{y}       ^^9f    \"{Y}
-
+    ÿ Ÿ          %   ^^ff    \"{y}       ^^9f    \"{Y}
 }
 
 % SORTING ORDER
diff --git a/Master/texmf-dist/bibtex/csf/biblatex/winansi_fi.csf b/Master/texmf-dist/bibtex/csf/biblatex/winansi_fi.csf
new file mode 100644
index 00000000000..abc8369347e
--- /dev/null
+++ b/Master/texmf-dist/bibtex/csf/biblatex/winansi_fi.csf
@@ -0,0 +1,243 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% CHARACTER SET: MS CP-1252 (Windows Ansi)
+%
+%      MS CP-1252 is a character set used by Microsoft Windows.
+%
+% SORTING ORDER: Finnish
+%
+%      Alphabetical sorting order of Aa..Zz (including accented characters).
+%
+%      This is a BibTeX Codepage and Sort definition file (CSF).  It is
+%      used to define the 8-bit character set used by BibTeX and the
+%      order in which those characters should be sorted.  The file
+%      format is documented below this header section.
+%
+%      This file will only work with the 8-bit implementation of BibTeX
+%      written by Niel Kempson and Alejandro Aguilar-Sierra:
+%
+%      http://www.ctan.org/tex-archive/biblio/bibtex/8-bit/
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% FILE FORMAT
+%
+%  The codepage and sorting order (CS) file defines how BibTeX will treat an
+%  8-bit character set, specifically which characters are to be treated as
+%  letters, the upper/lower case relationships between characters, and the
+%  sorting order of characters.
+%
+%  The CS file may contain a number of sections, each presented in the
+%  form of a TeX macro:
+%
+%      \section-name{
+%          <section definitions>
+%      }
+%
+%  Four sections are currently supported: \lowupcase, \lowercase, \uppercase
+%  and \order.  The syntax of the four supported sections is summarised below.
+%
+%  8-bit characters may be entered naturally, but to avoid problems with
+%  character set translation or corruption, they can also be entered using
+%  the TeX-style portable notation for character codes, i.e. ^^XX, where XX
+%  is the hexadecimal value ofthe character code.
+%
+%  Reading of the sections ends when the first '}' character is reached, so
+%  '}' can't be included in a section.  You can't use ^^7d either.
+%
+%  The percent sign ('%') is used to introduce a trailing comment - it and
+%  all remaining characters on a line are ignored.  ^^25 has the same effect.
+%
+%
+%  \lowupcase section
+%
+%      The \lowupcase section of the CS file is used to define the lower
+%      /upper and upper/lower case relationship of pairs of specified
+%      characters.  It is only used if the relationship is symmetrical - use
+%      \lowercase or \upcase if it isn't.
+%
+%      The syntax of the \lowupcase section is:
+%
+%          \lowupcase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      equivalent of <LC-n> is <UC-n> *and* the lower case equivalent of
+%      <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower or upper case equivalent of an ASCII
+%      character (code < 128), so all instances of <LC-n> and <UC-n>
+%      (i.e. both sides of the relationship) must have codes > 127.
+%
+%
+% \lowercase section
+%
+%      The \lowercase section of the CS file is used to define the lower case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \lowercase section is:
+%
+%          \lowercase{
+%              <UC-1> <LC-1>   % Comment begins with a percent sign
+%              <UC-2> <LC-2>
+%              ...
+%              <UC-N> <LC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the lower case
+%      equivalent of <UC-n> is <LC-n>.
+%
+%      You cannot redefine the lower case equivalent of an ASCII character
+%      (code < 128), so all instances of <UC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+% \uppercase section
+%
+%      The \uppercase section of the CS file is used to define the upper case
+%      equivalent of specified characters.  It should normally only be used
+%      if the relationship isn't symmetrical - use \lowupcase if it is.
+%
+%      The syntax of the \uppercase section is:
+%
+%          \uppercase{
+%              <LC-1> <UC-1>   % Comment begins with a percent sign
+%              <LC-2> <UC-2>
+%              ...
+%              <LC-N> <UC-N>
+%          }
+%
+%      Each <LC-n> <UC-n> pair of characters defines that the upper case
+%      case equivalent of <LC-n> is <UC-n>.
+%
+%      You cannot redefine the upper case equivalent of an ASCII character
+%      (code < 128), so all instances of <LC-n> (i.e. the left hand side
+%      of the relationship) must have codes > 127.
+%
+%
+%  \order section
+%
+%      The \order section of the CS file is used to define the order in which
+%      characters are sorted.
+%
+%      The syntax of the \order section is:
+%
+%          \order{
+%              <char-1>                % Comment begins with a percent sign
+%              <char-2> <char-3>       % whitespace between the chars
+%              <char-4> - <char-5>     % a hyphen between the chars
+%              <char-4> _ <char-5>     % an underscore between the chars
+%              ...
+%              <char-n>
+%          }
+%
+%      All characters on the same line are given the same sorting weight.
+%
+%      The construct <char-1> <underscore> <char-2> is used to denote that
+%      all characters in the range <char-1> to <char-2> should be given the
+%      same sorting weight.  For example, "A _ Z" would cause all ASCII
+%      upper case alphabetical characters to have the same sorting weight
+%      and would be equivalent to placing all 26 characters on the same line.
+%
+%      The construct <char-1> <hyphen> <char-2> is used to denote that all
+%      characters in the range <char-1> to <char-2> should be given an
+%      ascending set of sorting weights, starting with <char-1> and ending
+%      with <char-2>.  For example, "A - Z" would cause all upper case ASCII
+%      alphabetical characters to be sorted in ascending order and would be
+%      equivalent to placing 'A' on the first line, 'B' on the second,
+%      through to 'Z' on the 26th line.
+%
+%      The characters at the beginning of the order section are given a lower
+%      sorting weight than characters occuring later.  When sorting
+%      alphabetically, characters with the lowest weight come first.
+%
+%      All characters not in the \order section (including ASCII characters)
+%      are given the same very high sorting weight to ensure that they come
+%      last when sorting alphabetically.
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% CHARACTER SET
+
+\lowupcase{     %     Lowercase           Uppercase
+                %   Code    TeX         Code    TeX
+                %
+      š Š         %   ^^9a    \v{\s}      ^^8a    \v{S}
+      œ Œ         %   ^^9c    \oe         ^^8c    \OE
+      ž Ž         %   ^^9e    \v{\z}      ^^8e    \v{Z}
+    à À         %   ^^e0    \`{a}       ^^c0    \`{A}
+    á Á         %   ^^e1    \'{a}       ^^c1    \'{A}
+    â Â         %   ^^e2    \^{a}       ^^c2    \^{A}
+    ã Ã         %   ^^e3    \~{a}       ^^c3    \~{A}
+    ä Ä         %   ^^e4    \"{a}       ^^c4    \"{A}
+    å Å         %   ^^e5    \aa         ^^c5    \AA
+    æ Æ         %   ^^e6    \ae         ^^c6    \AE
+    ç Ç         %   ^^e7    \c{c}       ^^c7    \c{C}
+    è È         %   ^^e8    \`{e}       ^^c8    \`{E}
+    é É         %   ^^e9    \'{e}       ^^c9    \'{E}
+    ê Ê         %   ^^ea    \^{e}       ^^ca    \^{E}
+    ë Ë         %   ^^eb    \"{e}       ^^cb    \"{E}
+    ì Ì         %   ^^ec    \`{\i}      ^^cc    \`{I}
+    í Í         %   ^^ed    \'{\i}      ^^cd    \'{I}
+    î Î         %   ^^ee    \^{\i}      ^^ce    \^{I}
+    ï Ï         %   ^^ef    \"{\i}      ^^cf    \"{I}
+    ð Ð         %   ^^f0    \dh         ^^d0    \DH
+    ñ Ñ         %   ^^f1    \~{n}       ^^d1    \~{N}
+    ò Ò         %   ^^f2    \`{o}       ^^d2    \`{O}
+    ó Ó         %   ^^f3    \'{o}       ^^d3    \'{O}
+    ô Ô         %   ^^f4    \^{o}       ^^d4    \^{O}
+    õ Õ         %   ^^f5    \~{o}       ^^d5    \~{O}
+    ö Ö         %   ^^f6    \"{o}       ^^d6    \"{O}
+    ø Ø         %   ^^f8    \o          ^^d8    \O
+    ù Ù         %   ^^f9    \`{u}       ^^d9    \`{U}
+    ú Ú         %   ^^fa    \'{u}       ^^da    \'{U}
+    û Û         %   ^^fb    \^{u}       ^^db    \^{U}
+    ü Ü         %   ^^fc    \"{u}       ^^dc    \"{U}
+    ý Ý         %   ^^fd    \'{y}       ^^dd    \'{Y}
+    þ Þ         %   ^^fe    \th         ^^de    \TH
+    ÿ Ÿ          %   ^^ff    \"{y}       ^^9f    \"{Y}
+}
+
+% SORTING ORDER
+
+\order{
+    0-9
+    A À Á Â Ã Å Ä Æ a à á â ã å ä æ
+    B b
+    C Ç c ç
+    D Ð d ð
+    E È É Ê Ë e è é ê ë
+    F f
+    G g
+    H h
+    I Ì Í Î Ï i ì í î ï
+    J j
+    K k
+    L l
+    M m
+    N Ñ n ñ
+    O Ò Ó Ô Œ o ò ó ô œ
+    P p
+    Q q
+    R r
+    S Š s š ß
+    T Þ t þ
+    U Ù Ú Û u ù ú û
+    V v
+    W w
+    X x
+    Y Ý Ÿ Ü y ý ÿ ü
+    Z Ž z ž
+    Å å
+    Ä ä
+    Ö Õ Ø ö õ ø
+}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% END OF FILE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%