texi2dvi braces fix (among much else)

git-svn-id: svn://tug.org/texlive/trunk@10240 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 232 insertions, 157 deletions

diff --git a/Master/bin/sparc-linux/texi2dvi b/Master/bin/sparc-linux/texi2dvi
index 4607be1949e..877ea9599dd 100755
--- a/Master/bin/sparc-linux/texi2dvi
+++ b/Master/bin/sparc-linux/texi2dvi
@@ -1,6 +1,6 @@
 #! /bin/sh
 # texi2dvi --- produce DVI (or PDF) files from Texinfo (or (La)TeX) sources.
-# $Id: texi2dvi,v 1.122 2008/04/17 18:45:49 karl Exp $
+# $Id: texi2dvi,v 1.133 2008/08/11 00:18:29 karl Exp $
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001,
 # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
@@ -33,112 +33,13 @@ unset RUNNING_KSH
 set -e
 
 # This string is expanded by rcs automatically when this file is checked out.
-rcs_revision='$Revision: 1.122 $'
+rcs_revision='$Revision: 1.133 $'
 rcs_version=`set - $rcs_revision; echo $2`
 program=`echo $0 | sed -e 's!.*/!!'`
-version="texi2dvi (GNU Texinfo 4.12) $rcs_version
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-"
 
 build_mode=${TEXI2DVI_BUILD_MODE:-local}
 build_dir=${TEXI2DVI_BUILD_DIRECTORY:-.}
 
-usage="Usage: $program [OPTION]... FILE...
-
-Run each Texinfo or (La)TeX FILE through TeX in turn until all
-cross-references are resolved, building all indices.  The directory
-containing each FILE is searched for included files.  The suffix of FILE
-is used to determine its language ((La)TeX or Texinfo).  To process
-(e)plain TeX files, set the environment variable LATEX=tex.
-
-In order to make texi2dvi a drop-in replacement of TeX/LaTeX in AUC-TeX,
-the FILE may also be composed of the following simple TeX commands.
-  \`\\input{FILE}'     the actual file to compile
-  \`\\nonstopmode'     same as --batch
-
-Makeinfo is used to perform Texinfo macro expansion before running TeX
-when needed.
-
-General options:
-  -b, --batch         no interaction
-  -D, --debug         turn on shell debugging (set -x)
-  -h, --help          display this help and exit successfully
-  -o, --output=OFILE  leave output in OFILE (implies --clean);
-			only one input FILE may be specified in this case
-  -q, --quiet         no output unless errors (implies --batch)
-  -s, --silent        same as --quiet
-  -v, --version       display version information and exit successfully
-  -V, --verbose       report on what is done
-
-TeX tuning:
-  -@                         use @input instead of \input for preloaded Texinfo
-      --dvi                  output a DVI file [default]
-  -e, -E, --expand           force macro expansion using makeinfo
-  -I DIR                     search DIR for Texinfo files
-  -l, --language=LANG        specify the LANG of FILE (LaTeX or Texinfo)
-      --no-line-error        do not pass --file-line-error to TeX
-  -p, --pdf                  use pdftex or pdflatex for processing
-  -r, --recode               call recode before TeX to translate input
-      --recode-from=ENC      recode from ENC to the @documentencoding
-      --src-specials         pass --src-specials to TeX
-  -t, --command=CMD          insert CMD in copy of input file
-   or --texinfo=CMD          multiple values accumulate
-      --translate-file=FILE  use given charset translation file for TeX
-
-Build modes:
-  --build=MODE         specify the treatment of auxiliary files [$build_mode]
-      --tidy           same as --build=tidy
-  -c, --clean          same as --build=clean
-      --build-dir=DIR  specify where the tidy compilation is performed;
-			 implies --tidy;
-			 defaults to TEXI2DVI_BUILD_DIRECTORY [$build_dir]
-  --mostly-clean       remove the auxiliary files and directories
-			 but not the output
-
-The MODE specifies where the TeX compilation takes place, and, as a
-consequence, how auxiliary files are treated.  The build mode
-can also be set using the environment variable TEXI2DVI_BUILD_MODE.
-
-Valid MODEs are:
-  \`local'      compile in the current directory, leaving all the auxiliary
-	       files around.  This is the traditional TeX use.
-  \`tidy'       compile in a local *.t2d directory, where the auxiliary files
-	       are left.  Output files are copied back to the original file.
-  \`clean'      same as \`tidy', but remove the auxiliary directory afterwards.
-	       Every compilation therefore requires the full cycle.
-
-Using the \`tidy' mode brings several advantages:
-  -   the current directory is not cluttered with plethora of temporary files.
-  -   clutter can be even reduced using --build-dir=dir: all the *.t2d
-      directories are stored there.
-  -   clutter can be reduced to zero using, e.g., --build-dir=/tmp/\$USER.t2d
-      or --build-dir=\$HOME/.t2d.
-  -   the output file is updated after every succesful TeX run, for
-      sake of concurrent visualization of the output.  In a \`local' build
-      the viewer stops during the whole TeX run.
-  -   if the compilation fails, the previous state of the output file
-      is preserved.
-  -   PDF and DVI compilation are kept in separate subdirectories
-      preventing any possibility of auxiliary file incompatibility.
-
-On the other hand, because \`tidy' compilation takes place in another
-directory, occasionally TeX won't be able to find some files (e.g., when
-using \\graphicspath): in that case use -I to specify the additional
-directories to consider.
-
-The values of the BIBTEX, LATEX (or PDFLATEX), MAKEINDEX, MAKEINFO,
-TEX (or PDFTEX), TEXINDEX, and THUMBPDF environment variables are used
-to run those commands, if they are set.  Any CMD strings are added
-after @setfilename for Texinfo input, in the first line for LaTeX input.
-
-Email bug reports to <bug-texinfo@gnu.org>,
-general questions and discussion to <help-texinfo@gnu.org>.
-Texinfo home page: http://www.gnu.org/software/texinfo/"
-
 # Initialize variables for option overriding and otherwise.
 # Don't use `unset' since old bourne shells don't have this command.
 # Instead, assign them an empty value.
@@ -286,6 +187,34 @@ absolute ()
 }
 
 
+# ensure_dir DIR1 DIR2...
+# -----------------------
+# Make sure the directories exist.
+ensure_dir ()
+{
+  for dir
+  do
+    test -d "$dir" \
+      || mkdir "$dir" \
+      || error 1 "cannot create directory: $dir"
+  done
+}
+
+
+# error EXIT_STATUS LINE1 LINE2...
+# --------------------------------
+# Report an error and exit with failure if EXIT_STATUS is non null.
+error ()
+{
+  local s="$1"
+  shift
+  report "$@"
+  if test "$s" != 0; then
+    exit $s
+  fi
+}
+
+
 # findprog PROG
 # -------------
 # Return true if PROG is somewhere in PATH, else false.
@@ -323,15 +252,6 @@ report ()
   done
 }
 
-# verbose WORD1 WORD2
-# -------------------
-# Report some verbose information.
-verbose ()
-{
-  if $verb; then
-    echo >&2 "$0: $@"
-  fi
-}
 
 # run COMMAND-LINE
 # ----------------
@@ -344,30 +264,143 @@ run ()
 }
 
 
-# error EXIT_STATUS LINE1 LINE2...
-# --------------------------------
-# Report an error and exit with failure if EXIT_STATUS is non null.
-error ()
+# usage
+# -----
+# Display usage and exit successfully.
+usage ()
 {
-  local s="$1"
-  shift
-  report "$@"
-  if test "$s" != 0; then
-    exit $s
+  # We used to simply have `echo "$usage"', but coping with the
+  # changing behavior of `echo' is much harder than simply using a
+  # here-doc.
+  #
+  #             echo '\noto'   echo '\\noto'   echo -e '\\noto'
+  # bash 3.1      \noto           \\noto          \noto
+  # bash 3.2       %oto           \noto           -e \noto
+  #
+  # where % denotes the eol character.
+  cat <<EOF
+Usage: $program [OPTION]... FILE...
+
+Run each Texinfo or (La)TeX FILE through TeX in turn until all
+cross-references are resolved, building all indices.  The directory
+containing each FILE is searched for included files.  The suffix of FILE
+is used to determine its language ((La)TeX or Texinfo).  To process
+(e)plain TeX files, set the environment variable LATEX=tex.
+
+In order to make texi2dvi a drop-in replacement of TeX/LaTeX in AUC-TeX,
+the FILE may also be composed of the following simple TeX commands.
+  \`\\input{FILE}'     the actual file to compile
+  \`\\nonstopmode'     same as --batch
+
+Makeinfo is used to perform Texinfo macro expansion before running TeX
+when needed.
+
+General options:
+  -b, --batch         no interaction
+  -D, --debug         turn on shell debugging (set -x)
+  -h, --help          display this help and exit successfully
+  -o, --output=OFILE  leave output in OFILE (implies --clean);
+			only one input FILE may be specified in this case
+  -q, --quiet         no output unless errors (implies --batch)
+  -s, --silent        same as --quiet
+  -v, --version       display version information and exit successfully
+  -V, --verbose       report on what is done
+
+TeX tuning:
+  -@                         use @input instead of \input for preloaded Texinfo
+      --dvi                  output a DVI file [default]
+      --dvipdf               output a PDF file via DVI (using dvipdf)
+  -e, -E, --expand           force macro expansion using makeinfo
+  -I DIR                     search DIR for Texinfo files
+  -l, --language=LANG        specify LANG for FILE, either latex or texinfo
+      --no-line-error        do not pass --file-line-error to TeX
+  -p, --pdf                  use pdftex or pdflatex for processing
+  -r, --recode               call recode before TeX to translate input
+      --recode-from=ENC      recode from ENC to the @documentencoding
+      --src-specials         pass --src-specials to TeX
+  -t, --command=CMD          insert CMD in copy of input file
+   or --texinfo=CMD          multiple values accumulate
+      --translate-file=FILE  use given charset translation file for TeX
+
+Build modes:
+  --build=MODE         specify the treatment of auxiliary files [$build_mode]
+      --tidy           same as --build=tidy
+  -c, --clean          same as --build=clean
+      --build-dir=DIR  specify where the tidy compilation is performed;
+			 implies --tidy;
+			 defaults to TEXI2DVI_BUILD_DIRECTORY [$build_dir]
+  --mostly-clean       remove the auxiliary files and directories
+			 but not the output
+
+The MODE specifies where the TeX compilation takes place, and, as a
+consequence, how auxiliary files are treated.  The build mode
+can also be set using the environment variable TEXI2DVI_BUILD_MODE.
+
+Valid MODEs are:
+  \`local'      compile in the current directory, leaving all the auxiliary
+	       files around.  This is the traditional TeX use.
+  \`tidy'       compile in a local *.t2d directory, where the auxiliary files
+	       are left.  Output files are copied back to the original file.
+  \`clean'      same as \`tidy', but remove the auxiliary directory afterwards.
+	       Every compilation therefore requires the full cycle.
+
+Using the \`tidy' mode brings several advantages:
+  -   the current directory is not cluttered with plethora of temporary files.
+  -   clutter can be even reduced using --build-dir=dir: all the *.t2d
+      directories are stored there.
+  -   clutter can be reduced to zero using, e.g., --build-dir=/tmp/\$USER.t2d
+      or --build-dir=\$HOME/.t2d.
+  -   the output file is updated after every succesful TeX run, for
+      sake of concurrent visualization of the output.  In a \`local' build
+      the viewer stops during the whole TeX run.
+  -   if the compilation fails, the previous state of the output file
+      is preserved.
+  -   PDF and DVI compilation are kept in separate subdirectories
+      preventing any possibility of auxiliary file incompatibility.
+
+On the other hand, because \`tidy' compilation takes place in another
+directory, occasionally TeX won't be able to find some files (e.g., when
+using \\graphicspath): in that case use -I to specify the additional
+directories to consider.
+
+The values of the BIBTEX, LATEX (or PDFLATEX), MAKEINDEX, MAKEINFO,
+TEX (or PDFTEX), TEXINDEX, and THUMBPDF environment variables are used
+to run those commands, if they are set.  Any CMD strings are added
+after @setfilename for Texinfo input, in the first line for LaTeX input.
+
+Email bug reports to <bug-texinfo@gnu.org>,
+general questions and discussion to <help-texinfo@gnu.org>.
+Texinfo home page: http://www.gnu.org/software/texinfo/
+EOF
+  exit 0
+}
+
+
+# verbose WORD1 WORD2
+# -------------------
+# Report some verbose information.
+verbose ()
+{
+  if $verb; then
+    echo >&2 "$0: $@"
   fi
 }
 
-# ensure_dir DIR1 DIR2...
-# -----------------------
-# Make sure the directories exist.
-ensure_dir ()
+
+# version
+# -------
+# Display version info and exit succesfully.
+version ()
 {
-  for dir
-  do
-    test -d "$dir" \
-      || mkdir "$dir" \
-      || error 1 "cannot create directory: $dir"
-  done
+  cat <<EOF
+texi2dvi (GNU Texinfo 4.12+) $rcs_version
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+EOF
+  exit 0
 }
 
 
@@ -388,6 +421,42 @@ list_append ()
   eval $la_l=\""$@"\"
 }
 
+
+# list_concat_dirs LIST-NAME DIR-LIST
+# -----------------------------------
+# Append to LIST-NAME all the components (included empty) from
+# the $path_sep separated list DIR-LIST.  Make the paths absolute.
+list_concat_dirs ()
+{
+  local lcd_list="$1"
+  # Empty path components are meaningful to tex.  We rewrite them as
+  # `EMPTY' so they don't get lost when we split on $path_sep.
+  # Hopefully no one will have an actual directory named EMPTY.
+  local replace_EMPTY="-e 's/^$path_sep/EMPTY$path_sep/g' \
+                       -e 's/$path_sep\$/${path_sep}EMPTY/g' \
+                       -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'"
+  save_IFS=$IFS
+  IFS=$path_sep
+  set x `echo "$2" | eval sed $replace_EMPTY`; shift
+  IFS=$save_IFS
+  local dir
+  for dir
+  do
+    case $dir in
+      EMPTY)
+       list_append $lcd_list ""
+       ;;
+      *)
+       if test -d $dir; then
+          dir=`absolute "$dir"`
+         list_append $lcd_list "$dir"
+       fi
+       ;;
+    esac
+  done
+}
+
+
 # list_prefix LIST-NAME SEP -> STRING
 # -----------------------------------
 # Return a string that is composed of the LIST-NAME with each item
@@ -488,16 +557,15 @@ done
 # ---------------------------------------
 # Convert relative paths to absolute paths, so we can run in another
 # directory (e.g., in tidy build mode, or during the macro-support
-# detection).
-#
-# Empty path components are meaningful to tex.  We rewrite them
-# as `EMPTY' so they don't get lost when we split on $path_sep.
-# Hopefully no one will have an actual directory named EMPTY.
+# detection).  Prepend ".".
 absolute_filenames ()
 {
+  # Empty path components are meaningful to tex.  We rewrite them as
+  # `EMPTY' so they don't get lost when we split on $path_sep.
+  # Hopefully no one will have an actual directory named EMPTY.
   local replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \
-		       -e 's/$path_sep\$/${path_sep}EMPTY/g' \
-		       -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'"
+                       -e 's/$path_sep\$/${path_sep}EMPTY/g' \
+                       -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'"
   local res
   res=`echo "$1" | eval sed $replace_empty`
   save_IFS=$IFS
@@ -511,8 +579,14 @@ absolute_filenames ()
 	res=$res$path_sep
 	;;
       *)
-	if test -d $dir; then
+	if test -d "$dir"; then
 	  res=$res$path_sep`absolute "$dir"`
+	else
+	  # Even if $dir is not a directory, preserve it in the path.
+	  # It might contain metacharacters that TeX will expand in
+	  # turn, e.g., /some/path/{a,b,c}.  This will not get the
+	  # implicit absolutification of the path, but we can't help that.
+	  res=$res$path_sep$dir
 	fi
 	;;
     esac
@@ -694,16 +768,18 @@ generated_files_get ()
        fi
        ;;
       latex)
-       # bibtex: *.aux -> *.bbl and *.blg.
 	if aux_file_p $file; then
+          # bibtex: *.aux -> *.bbl and *.blg.
 	  echo $file | sed 's/^\(.*\)\.aux$/\1.bbl/'
-	 echo $file | sed 's/^\(.*\)\.aux$/\1.blg/'
+          echo $file | sed 's/^\(.*\)\.aux$/\1.blg/'
+          # -recorder: .fls
+          echo $file | sed 's/^\(.*\)\.aux$/\1.fls/'
        fi
        ;;
     esac
   done |
   # Filter existing files matching the criterion.
-  # 
+  #
   # With an input file name containing a space, this produces a
   # "command not found" message (and filtering is ineffective).
   # The situation with a newline is presumably even worse.
@@ -730,6 +806,10 @@ xref_files_save ()
     # The following line improves `cp $xref_files_orig "$work_bak"'
     # by preserving the directory parts.  Think of
     # cp chap1/main.aux chap2/main.aux $work_bak.
+    #
+    # Users may have, e.g., --keep-old-files.  Don't let this interfere.
+    # (Don't use unset for the sake of ancient shells.)
+    TAR_OPTIONS=; export TAR_OPTIONS
     tar cf - $xref_files_orig | (cd "$work_bak" && tar xf -)
   fi
 }
@@ -853,26 +933,26 @@ run_tex ()
   # we'd like to handle arbitrary input file names, such as a~b.tex.
   # This isn't a general way to do it :), though it does work, kind of.
   # cmd="$cmd '${escape}catcode126=12 \input '"
-  
+
   # TeX's \input does not (easily or reliably) support whitespace
   # characters or other special characters in file names.  Our intensive
   # use of absolute file names makes this worse: the enclosing directory
   # names may include white spaces.  Improve the situation using a
   # symbolic link to the filename in the current directory, in tidy mode
   # only.  Do not alter in_input.
-  # 
+  #
   # The filename is almost always tokenized using plain TeX conventions
   # (the exception would be if the user made a texinfo.fmt file).  Not
   # all the plain TeX special characters cause trouble, but there's no
   # harm in making the link.
-  # 
+  #
   case $tidy:`func_dirname "$in_input"` in
     true:*["$space$tab$newline\"#\$%\\^_{}"]*)
       _run_tex_file_name=`basename "$in_input"`
       if test ! -f "$_run_tex_file_name"; then
-	verbose ln -s "$in_input"
-	rm -f "$_run_tex_file_name"
-	ln -s "$_run_tex_file_name"
+	# It might not be a file, clear it.
+	run rm -f "$_run_tex_file_name"
+	run ln -s "$in_input"
       fi
       cmd="$cmd '$_run_tex_file_name'"
       ;;
@@ -1094,8 +1174,8 @@ uncomment_iftex='s/^@c texi2dvi//'
 # main info output, the user asked to run TeX, not makeinfo.
 run_makeinfo ()
 {
-  test $in_lang == texinfo ||
-    return 0
+  test $in_lang = texinfo \
+    || return 0
 
   # Unless required by the user, makeinfo expansion is wanted only
   # if texinfo.tex is too old.
@@ -1333,7 +1413,7 @@ compile ()
     eval val="\$common\$${var}_orig"
     # Convert relative paths to absolute paths, so we can run in another
     # directory (e.g., in clean build mode, or during the macro-support
-    # detection).
+    # detection). ".:" is added here.
     val=`absolute_filenames "$val"`
     eval $var="\"$val\""
     export $var
@@ -1436,14 +1516,9 @@ while test x"$1" != x"$arg_sep"; do
 	 --dvi)   out_lang=dvi;;
 	 --dvipdf)   out_lang=dvipdf;;
     -e | -E | --expand) expand=t;;
-    -h | --help) echo "$usage"; exit 0;;
+    -h | --help) usage;;
 	 --html) out_lang=html;;
-    -I | --I*)
-      shift
-      # Use absolute dir names in the includes.
-      val=`absolute "$1"`
-      list_append includes "$val"
-      ;;
+    -I)   shift; list_concat_dirs includes "$1";;
     --info) out_lang=info;;
     -l | --lang | --language) shift; set_language=$1;;
     --mostly-clean) action=mostly-clean;;
@@ -1463,7 +1538,7 @@ while test x"$1" != x"$arg_sep"; do
     --text) out_lang=text;;
     --translate-file ) shift; translate_file="$1";;
     --tidy) build_mode=tidy;;
-    -v | --vers*) echo "$version"; exit 0;;
+    -v | --vers*) version;;
     -V | --verb*) verb=true;;
     --) # What remains are not options.
       shift