prepare for restore

git-svn-id: svn://tug.org/texlive/trunk@6990 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 0 insertions, 264 deletions

diff --git a/Master/bin/i386-solaris/mktexpk b/Master/bin/i386-solaris/mktexpk
deleted file mode 100755
index d2736ea77dc..00000000000
--- a/Master/bin/i386-solaris/mktexpk
+++ /dev/null
@@ -1,264 +0,0 @@
-#!/bin/sh
-# original mktexpk -- make a new PK font, because one wasn't found.
-# 
-# (If you change or delete the word `original' on the previous line,
-# installation won't write this script over yours.)
-# 
-# te@dbs.uni-hannover.de, kb@mail.tug.org, and infovore@xs4all.nl.
-# Public domain.
-
-version='$Id: mktexpk,v 1.34 2005/06/21 10:49:10 olaf Exp $'
-progname=`echo $0 | sed 's%.*/%%'`
-usage="Usage: $progname [OPTIONS] NAME [REDIRECT],
-  Create a PK font.
-
---dpi DPI           use resolution DPI.
---bdpi BDPI         use base resolution BDPI.
---mag MAG           use magnificiation MAG.
---mfmode MODE       use MODE as the METAFONT mode.
---destdir DESTDIR   write fonts in DESTDIR.
-
-Try to create a PK file for NAME at resolution DPI, with an assumed
-device base resolution of BDPI, and a Metafont \`mag' of MAG. Use MODE
-for the METAFONT mode.  Use DESTDIR for the root of where to install
-into, either the absolute directory name to use (if it starts with a
-/) or relative to the default DESTDIR (if not). REDIRECT, if supplied,
-is a string of the form '>&n', where n is the number of the file
-descriptor which is to receive, instead of stdout, the name of the
-newly created pk file."
-
-# Handle non-positional options, except for --version/--help
-while test $# -gt 0; do
-  case "$1" in
-    --destdir) shift; DEST="$1"; shift ;;
-    --destdir=*) DEST=`echo "$1" | sed 's/--destdir=//'`; shift ;;
-    --dpi) shift; DPI="$1"; shift ;;
-    --dpi=*) DPI=`echo "$1" | sed 's/--dpi=//'`; shift ;;
-    --bdpi) shift; BDPI="$1"; shift ;;
-    --bdpi=*) BDPI=`echo "$1" | sed 's/--bdpi=//'`; shift ;;
-    --mfmode) shift; test "x$1" != "x/" && MODE="$1"; shift ;;
-    --mfmode=*) test "x$1" != "x--mfmode/" \
-                && MODE=`echo "$1" | sed 's/--mfmode=//'`; shift ;;
-    --mag) shift; MAG="$1"; shift;;
-    --mag=*) MAG=`echo "$1" | sed '/s--mag=//'`; shift;;
-    --version|-version) break ;;
-    --help|-help) break ;;
-    *) break ;;
-  esac
-done
-
-if test "x$2" != x; then
-  tail="`echo \"x$2\" | sed 's/^x>&//' | grep '^[0-9]*$'`"
-  if test -z "$tail"; then
-    echo "$progname: argument '$2' ignored - bad file number" >&2
-  elif test "$tail" != 1; then
-      eval 'exec 1>&$tail'
-  fi
-fi
-
-mt_max_args=2
-
-# Common code for all scripts.
-: ${MT_TEXMFMAIN=`kpsewhich --expand-path='$TEXMFMAIN'`}
-: ${MT_MKTEX_OPT=`kpsewhich --format='web2c files' mktex.opt`}
-test -n "$MT_MKTEX_OPT" || MT_MKTEX_OPT="$MT_TEXMFMAIN/web2c/mktex.opt"
-if test ! -f "$MT_MKTEX_OPT"; then
-  echo "$progname: Cannot find mktex.opt; check your installation." >&2
-  exit 1
-fi
-
-. "$MT_MKTEX_OPT"
-
-# Where do potential driver files belong?
-case "$MT_FEATURES" in
-  *nomfdrivers*)
-     : ${MT_MFDESTDIR=`pwd`}
-     export MT_MFDESTDIR;;
-esac
-
-# Since we want to pass the generated filename and only that filename
-# back to the caller on standard output, we do some redirections so
-# regular echo's will end up on stderr, and do an echo >$STDOUT at the end.
-# Then the contents of $STDOUT will be echoed to stdout by a trap.
-
-# start of redirection stdout -> stderr, stdin <- /dev/null
-(
-
-NAME=$1
-
-if kpsewhich $NAME.mf >/dev/null 2>&1 || mktexmf $NAME >/dev/null 2>&1; then
-  # determine the progname of metafont to use; prefer mf-nowin.
-  if (mf-nowin --version) >/dev/null 2>&1; then
-    MF="mf-nowin -progname=mf"
-  else
-    MF=mf
-  fi
-
-  # Check that $BDPI and $MODE are consistent; if not, ignore the mode and
-  # hope we can correctly guess it from bdpi.  (People like to specify the
-  # resolution on the command line, not the mode so much.)
-  if test -n "$MODE"; then
-    mf_bdpi=`$MF \
-'\mode:='$MODE';mode_setup;message"BDPI= "&decimal round pixels_per_inch;end.'\
-             </dev/null \
-             | awk '/DPI=/ {print $2}'`
-    if test "x$mf_bdpi" != x$BDPI; then
-      echo "$progname: Mismatched mode $MODE and resolution $BDPI; ignoring mode." >&2
-      MODE=
-    fi
-  fi
-
-  # If an explicit mode is not supplied, try to guess. You can get a
-  # list of extant modes from ftp://ftp.tug.org/tex/modes.mf.
-  if test -z "$MODE" || test "x$MODE" = xdefault; then
-    case "$BDPI" in
-      85) MODE=sun;;
-     100) MODE=nextscrn;;
-     180) MODE=toshiba;;
-     300) MODE=cx;;
-     360) MODE=epstylus;;
-     400) MODE=nexthi;;
-     600) MODE=ljfour;;
-     720) MODE=epsczz;;
-    1200) MODE=ultre;;
-    1270) MODE=linoone;;
-    8000) MODE=dpdfezzz;;
-       *) echo "$progname: Can't guess mode for $BDPI dpi devices." >&2
-          echo "$progname: Use a config file or option to specify the mode; see:" >&2
-          echo "$progname: http://tug.org/texinfohtml/kpathsea.html#Unable-to-generate-fonts" >&2
-          exit 1
-    esac
-  fi
-
-  # Run Metafont. Always use plain Metafont, since reading cmbase.mf
-  # does not noticeably slow things down.
-  cmd="$MF \mode:=$MODE; mag:=$MAG; nonstopmode; input $NAME"
-else
-  MODE=modeless
-  # ps_to_pk is set in mktex.opt
-  case $ps_to_pk in
-    gsftopk)
-      if $ps_to_pk -t "$NAME"; then
-        cmd="$ps_to_pk $NAME $DPI"
-      fi;;
-    ps2pk)
-      # grep for the font in $PSMAPFILE.  These are base font names, such as
-      # rpplr (the original) or pplr0 (an interim step) or pplr8r (current).
-      : ${PSMAPFILE=`kpsewhich --format=map psfonts.map ps2pk.map`}
-      pattern="^$NAME"'([ 	]|$)' 
-      psline=`egrep "$pattern" $PSMAPFILE | tail -1`
-      if test -n "$psline"; then
-        set x `echo "$psline" | sed 's%[<["]%%g'`
-        shift; shift; shift;
-        encoding=; psname=; slant=; extend=
-        while test ! -z "$1"; do
-          case "$1" in
-            *.enc)       encoding="-e $1";;
-            *.pf[ab])    psname="$1";;
-            *SlantFont)  slant="-S $lastopt";;
-            *ExtendFont) extend="-E $lastopt";;
-          esac
-          lastopt="$1"
-          shift
-        done
-        # Guessing the name of the type1 font file as fallback:
-        ANAME=`echo $NAME | sed 's/8r$/8a/'`
-        for i in $NAME.pfa $NAME.pfb $ANAME.pfa $ANAME.pfb; do
-          if kpsewhich $i >/dev/null 2>&1; then
-            psname=$i
-            break
-          fi
-        done
-
-        if [ -n "$psname" ]; then
-          cmd="ps2pk -v -X$DPI -R$BDPI $slant $extend $encoding $psname $NAME.${DPI}pk"
-        else
-          if gsftopk -t "$NAME"; then
-            echo "$progname: cannot find $NAME.pfa or $NAME.pfb. Trying gsftopk." >&2
-            cmd="gsftopk $NAME $DPI"
-          fi
-        fi
-      fi;;
-  esac
-
-  # unsupported by $ps_to_pk, try other conversions:
-  if test -z "$cmd"; then
-    if (ttf2pk -t -q $NAME) >/dev/null 2>&1; then
-      cmd="ttf2pk -q $NAME $DPI"
-    elif (hbf2gf -t -q $NAME) >/dev/null 2>&1; then
-      cmd="hbf2gf -q -p $NAME $DPI"
-    else
-      echo "$progname: don't know how to create bitmap font for $NAME." >&2
-      exit 1
-    fi
-  fi
-fi
-
-OIFS=$IFS; IFS=$SEP
-set x `"$MT_MKTEXNAM" $NAME $DPI $MODE $DEST`; shift
-IFS=$OIFS
-
-PKDEST="$1"
-PKDESTDIR=`echo "$PKDEST" | sed 's%/[^/][^/]*$%%'` # can't rely on dirname
-PKNAME=`basename "$PKDEST"`
-GFNAME=$NAME.${DPI}gf
-
-if test -r "$PKDESTDIR/$PKNAME"; then
-  echo "$progname: $PKDESTDIR/$PKNAME already exists." >&2
-  echo "$PKDESTDIR/$PKNAME" >$STDOUT
-  "$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME
-  exit 0
-fi
-
-"$MT_MKTEXDIR" "$PKDESTDIR"
-if test ! -d "$PKDESTDIR"; then
-  echo "$progname: mktexdir $PKDESTDIR failed." >&2
-  exit 1
-fi
-
-echo "$progname: Running $cmd"
-$cmd </dev/null || {
-  # Don't abort if only "Strange path", "bad pos" or "angle(0,0)"
-  # errors occurr.
-  grep '^!' $NAME.log | sort >$$.errs 2>/dev/null
-  grep '^! Strange path' $$.errs >$$.strange 2>/dev/null
-  grep '^! bad pos.' $$.errs >$$.badpos 2>/dev/null
-  grep '^! angle(0,0) is taken as zero.' $$.errs >$$.angle 2>/dev/null
-  cat $$.badpos $$.strange $$.angle | sort > $$.errs_accept
-  if cmp $$.errs $$.errs_accept >/dev/null 2>&1; then
-    test -s $$.strange >/dev/null 2>&1 \
-      && echo "$progname: warning: \`$cmd' caused strange path errors." >&2
-    test -s $$.badpos >/dev/null 2>&1 \
-      && echo "$progname: warning: \`$cmd' caused bad pos errors." >&2
-    test -s $$.angle >/dev/null 2>&1 \
-      && echo "$progname: warning: \`$cmd' caused angle(0,0) errors." >&2
-  else
-    echo "$progname: \`$cmd' failed." >&2
-    test -s $NAME.log && mv -f $NAME.log "$KPSE_DOT"
-    exit 1;
-  fi
-}
-
-test -r $GFNAME && { gftopk ./$GFNAME $PKNAME || exit 1; }
-test ! -f $PKNAME && test -f $NAME.${DPI}pk && mv $NAME.${DPI}pk $PKNAME
-if test ! -s $PKNAME; then
-  echo "$progname: \`$cmd' failed to make $PKNAME." >&2
-  exit 1
-fi
-
-# Install the PK file carefully, since others may be working simultaneously.
-# Use cp when mv fails, since DOS will fail mv for deeply-nested directories.
-mv $PKNAME "$PKDESTDIR/pk$$.tmp" 2>/dev/null \
-  || cp $PKNAME "$PKDESTDIR/pk$$.tmp" || exit 1
-cd $PKDESTDIR || exit 1
-chmod `kpsestat -xst,go-w .` pk$$.tmp
-test -r $PKNAME || mv pk$$.tmp $PKNAME || exit 1
-
-# Update ls-R if necessary.
-"$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME
-
-# If this line (or an equivalent) is not present, dvipsk/xdvik/dviljk
-# will think mktexpk failed.  Any other output to stdout will also lose.
-echo "$PKDESTDIR/$PKNAME" >$STDOUT
-echo "$progname: $PKDESTDIR/$PKNAME: successfully generated." >&2
-) 1>&2 </dev/null