build system: cleanup xindy, remove some unused files

git-svn-id: svn://tug.org/texlive/trunk@13202 c570f23f-e606-0410-a88d-b1316a301751

105 files changed, 497 insertions, 13787 deletions

diff --git a/Build/source/Makefile.am b/Build/source/Makefile.am
index 5e913ba4215..903dc825136 100644
--- a/Build/source/Makefile.am
+++ b/Build/source/Makefile.am
@@ -16,6 +16,7 @@ EXTRA_DIST = \
 	README.cross \
 	README.layout \
 	build-aux/README.TL \
+	build-aux/mkinstalldirs \
 	m4/README
 
 # just in case a subdirectory has added directories
@@ -34,7 +35,7 @@ SUBDIRS += libs utils texk
 # run texlinks here since the binaries won't be there 
 # at install-data, and fmtutil.cnf won't be there at install-exec,
 # and there is no install-hook or install-local.
-world: install-strip
+world: all install-strip
 	echo "top-level make $@: running texlinks ..."
 	cd texk/tetex && $(MAKE) $(AM_MAKEFLAGS) run-texlinks
 ##
diff --git a/Build/source/Makefile.in b/Build/source/Makefile.in
index f6d07027cab..c918c2a1579 100644
--- a/Build/source/Makefile.in
+++ b/Build/source/Makefile.in
@@ -36,7 +36,7 @@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(top_srcdir)/configure ChangeLog \
 	build-aux/config.guess build-aux/config.sub build-aux/depcomp \
 	build-aux/install-sh build-aux/ltmain.sh build-aux/missing \
-	build-aux/texinfo.tex build-aux/ylwrap
+	build-aux/mkinstalldirs build-aux/texinfo.tex build-aux/ylwrap
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-common.m4 \
 	$(top_srcdir)/m4/kpse-cxx-hack.m4 \
@@ -130,7 +130,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
 CONFIG_CLEAN_FILES =
 SOURCES =
 DIST_SOURCES =
@@ -289,6 +289,7 @@ EXTRA_DIST = \
 	README.cross \
 	README.layout \
 	build-aux/README.TL \
+	build-aux/mkinstalldirs \
 	m4/README
 
 @build_kpathsea_FALSE@SUBDIRS = libs utils texk
@@ -736,7 +737,7 @@ dist-hook:
 # run texlinks here since the binaries won't be there 
 # at install-data, and fmtutil.cnf won't be there at install-exec,
 # and there is no install-hook or install-local.
-world: install-strip
+world: all install-strip
 	echo "top-level make $@: running texlinks ..."
 	cd texk/tetex && $(MAKE) $(AM_MAKEFLAGS) run-texlinks
 	@echo "make $@ done."
diff --git a/Build/source/build-aux/README.TL b/Build/source/build-aux/README.TL
index cbfb8097fcb..bc2abbeb3c0 100644
--- a/Build/source/build-aux/README.TL
+++ b/Build/source/build-aux/README.TL
@@ -4,3 +4,7 @@ You may freely use, modify and/or distribute this file.
 This directory is the central repository for auxiliary files, mostly shell
 scripts, needed to build the TeX Live (TL) tree.  They are used by all
 packages `owned' by the TL tree, i.e., maintained as part of TL.
+
+The file mkinstalldirs serves as master copy for the files used by the
+native build systems of some packages.
+
diff --git a/Build/source/configure b/Build/source/configure
index 81f6707b4a4..eb042a7eac0 100755
--- a/Build/source/configure
+++ b/Build/source/configure
@@ -928,7 +928,7 @@ enable_t1utils
 enable_tpic2pdftex
 enable_vlna
 enable_xindy
-enable_xindy_make_rules
+enable_xindy_rules
 enable_xindy_docs
 with_xindy_recode
 enable_web2c
@@ -1707,9 +1707,8 @@ Optional Features:
   --disable-tpic2pdftex   do not build the tpic2pdftex package
   --disable-vlna          do not build the vlna package
   --enable-xindy          build the xindy package
-  --enable-xindy-make-rules build and install make-rules package (default is
-                            YES)
-  --enable-xindy-docs       build and install documentation (default is YES)
+  --enable-xindy-rules      build and install make-rules package
+  --enable-xindy-docs       build and install documentation
   --disable-web2c         do not build the web2c (TeX & Co.) package
   --enable-auto-core        cause TeX&MF to dump core, given a certain
                             filename
@@ -2621,9 +2620,9 @@ esac
 
 ## utils/xindy/ac/xindy.ac: configure.ac fragment for the TeX Live subdirectory utils/xindy/
 ## configure options for xindy
-# Check whether --enable-xindy-make-rules was given.
-if test "${enable_xindy_make_rules+set}" = set; then
-  enableval=$enable_xindy_make_rules;
+# Check whether --enable-xindy-rules was given.
+if test "${enable_xindy_rules+set}" = set; then
+  enableval=$enable_xindy_rules;
 fi
 # Check whether --enable-xindy-docs was given.
 if test "${enable_xindy_docs+set}" = set; then
@@ -5998,13 +5997,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:6001: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:6000: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:6004: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:6003: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:6007: output\"" >&5)
+  (eval echo "\"\$as_me:6006: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -7210,7 +7209,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 7213 "configure"' > conftest.$ac_ext
+  echo '#line 7212 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -9257,11 +9256,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9260: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9259: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:9264: \$? = $ac_status" >&5
+   echo "$as_me:9263: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -9596,11 +9595,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9599: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9598: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:9603: \$? = $ac_status" >&5
+   echo "$as_me:9602: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -9701,11 +9700,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9704: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9703: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:9708: \$? = $ac_status" >&5
+   echo "$as_me:9707: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -9756,11 +9755,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9759: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9758: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:9763: \$? = $ac_status" >&5
+   echo "$as_me:9762: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -12556,7 +12555,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12559 "configure"
+#line 12558 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12652,7 +12651,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12655 "configure"
+#line 12654 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -19048,11 +19047,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:19051: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:19050: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:19055: \$? = $ac_status" >&5
+   echo "$as_me:19054: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -19147,11 +19146,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:19150: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:19149: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:19154: \$? = $ac_status" >&5
+   echo "$as_me:19153: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -19199,11 +19198,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:19202: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:19201: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:19206: \$? = $ac_status" >&5
+   echo "$as_me:19205: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -20199,6 +20198,9 @@ $as_echo "$as_me: error: Sorry, not found under any of: $list *****" >&2;}
   fi
 fi
 
+kpse_save_CPPFLAGS=$CPPFLAGS
+kpse_save_LIBS=$LIBS
+
 syslib_status=yes
 if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then
   ZLIB_INCLUDES="-I$with_zlib_includes"
@@ -23146,6 +23148,9 @@ if test "x$syslib_status" = xno; then
 $as_echo "$as_me: error: some requested system libraries failed" >&2;}
    { (exit 1); exit 1; }; }
 fi
+CPPFLAGS=$kpse_save_CPPFLAGS
+LIBS=$kpse_save_LIBS
+
 
 if test "x$cross_compiling:$enable_xetex" = xyes:yes; then
   { { $as_echo "$as_me:$LINENO: error: Sorry, can not cross compile icu libraries required for XeTeX" >&5
diff --git a/Build/source/configure.ac b/Build/source/configure.ac
index 03315c9427f..eca95c13906 100644
--- a/Build/source/configure.ac
+++ b/Build/source/configure.ac
@@ -85,6 +85,7 @@ fi
 
 dnl We check that all required system libraries are usable, and may
 dnl reduce frustration if anything is wrong by doing this first.
+KPSE_SAVE_FLAGS
 syslib_status=yes
 KPSE_ALL_SYSTEM_FLAGS
 KPSE_FOR_PKGS([syslib],
@@ -93,6 +94,7 @@ KPSE_FOR_PKGS([syslib],
 if test "x$syslib_status" = xno; then
   AC_MSG_ERROR([some requested system libraries failed])
 fi
+KPSE_RESTORE_FLAGS
 
 AS_IF([test "x$cross_compiling:$enable_xetex" = xyes:yes],
       [AC_MSG_ERROR([Sorry, can not cross compile icu libraries required for XeTeX])])
diff --git a/Build/source/libs/Makefile.am b/Build/source/libs/Makefile.am
index 1192ea05dcd..c6e87ecfc30 100644
--- a/Build/source/libs/Makefile.am
+++ b/Build/source/libs/Makefile.am
@@ -22,13 +22,13 @@ DISTCLEANFILES = $(noinst_DATA)
 all-local: sublibs
 
 .PHONY: sublibs
-## We must configure all libs subdirs since 'make dist' needs the Makefile.
-## For those not required for the current set of configure options
-## we append '--disable-build' so they can skip tests that would
-## fail because other libraries were not built.
-
-## Sequentially configure and optionally build all libs subdirs;
-## code inspired by automake's way to handle recursive targets.
+# We must configure all libs subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because other libraries were not built.
+#
+# Sequentially configure and optionally build all libs subdirs;
+# code inspired by automake's way to handle recursive targets.
 sublibs: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/libs/Makefile.in b/Build/source/libs/Makefile.in
index ece65574077..ecc78d75c05 100644
--- a/Build/source/libs/Makefile.in
+++ b/Build/source/libs/Makefile.in
@@ -672,7 +672,13 @@ dist-hook:
 all-local: sublibs
 
 .PHONY: sublibs
-
+# We must configure all libs subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because other libraries were not built.
+#
+# Sequentially configure and optionally build all libs subdirs;
+# code inspired by automake's way to handle recursive targets.
 sublibs: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/libs/configure b/Build/source/libs/configure
index fb01ecf76b1..59729430d42 100755
--- a/Build/source/libs/configure
+++ b/Build/source/libs/configure
@@ -693,7 +693,7 @@ enable_t1utils
 enable_tpic2pdftex
 enable_vlna
 enable_xindy
-enable_xindy_make_rules
+enable_xindy_rules
 enable_xindy_docs
 with_xindy_recode
 enable_web2c
@@ -1459,9 +1459,8 @@ Optional Features:
   --disable-tpic2pdftex   do not build the tpic2pdftex package
   --disable-vlna          do not build the vlna package
   --enable-xindy          build the xindy package
-  --enable-xindy-make-rules build and install make-rules package (default is
-                            YES)
-  --enable-xindy-docs       build and install documentation (default is YES)
+  --enable-xindy-rules      build and install make-rules package
+  --enable-xindy-docs       build and install documentation
   --disable-web2c         do not build the web2c (TeX & Co.) package
   --enable-auto-core        cause TeX&MF to dump core, given a certain
                             filename
@@ -2344,9 +2343,9 @@ esac
 
 ## utils/xindy/ac/xindy.ac: configure.ac fragment for the TeX Live subdirectory utils/xindy/
 ## configure options for xindy
-# Check whether --enable-xindy-make-rules was given.
-if test "${enable_xindy_make_rules+set}" = set; then
-  enableval=$enable_xindy_make_rules;
+# Check whether --enable-xindy-rules was given.
+if test "${enable_xindy_rules+set}" = set; then
+  enableval=$enable_xindy_rules;
 fi
 # Check whether --enable-xindy-docs was given.
 if test "${enable_xindy_docs+set}" = set; then
diff --git a/Build/source/libs/gd/Makefile.am b/Build/source/libs/gd/Makefile.am
index b815e9852ae..e4bb9cbd3de 100644
--- a/Build/source/libs/gd/Makefile.am
+++ b/Build/source/libs/gd/Makefile.am
@@ -18,6 +18,18 @@ EXTRA_DIST = $(GD_TREE)
 # in case of an SVN repository
 dist-hook:
 	rm -rf `find $(distdir)/$(GD_TREE) -name .svn`
+	rm -f $(distdir)/$(GD_TREE)/config/config.guess \
+	  $(distdir)/$(GD_TREE)/config/config.rpath \
+	  $(distdir)/$(GD_TREE)/config/config.sub \
+	  $(distdir)/$(GD_TREE)/config/depcomp \
+	  $(distdir)/$(GD_TREE)/config/install-sh \
+	  $(distdir)/$(GD_TREE)/config/ltmain.sh \
+	  $(distdir)/$(GD_TREE)/config/missing \
+	  $(distdir)/$(GD_TREE)/config/mkinstalldirs \
+	  $(distdir)/$(GD_TREE)/depcomp \
+	  $(distdir)/$(GD_TREE)/install-sh \
+	  $(distdir)/$(GD_TREE)/missing \
+	  $(distdir)/$(GD_TREE)/mkinstalldirs 
 
 INCLUDES = -I$(top_srcdir)/$(GD_TREE) $(ZLIB_INCLUDES) $(LIBPNG_INCLUDES)
 
diff --git a/Build/source/libs/gd/Makefile.in b/Build/source/libs/gd/Makefile.in
index 1f417ce037d..2e7f2e950d5 100644
--- a/Build/source/libs/gd/Makefile.in
+++ b/Build/source/libs/gd/Makefile.in
@@ -1036,6 +1036,18 @@ uninstall-am:
 # in case of an SVN repository
 dist-hook:
 	rm -rf `find $(distdir)/$(GD_TREE) -name .svn`
+	rm -f $(distdir)/$(GD_TREE)/config/config.guess \
+	  $(distdir)/$(GD_TREE)/config/config.rpath \
+	  $(distdir)/$(GD_TREE)/config/config.sub \
+	  $(distdir)/$(GD_TREE)/config/depcomp \
+	  $(distdir)/$(GD_TREE)/config/install-sh \
+	  $(distdir)/$(GD_TREE)/config/ltmain.sh \
+	  $(distdir)/$(GD_TREE)/config/missing \
+	  $(distdir)/$(GD_TREE)/config/mkinstalldirs \
+	  $(distdir)/$(GD_TREE)/depcomp \
+	  $(distdir)/$(GD_TREE)/install-sh \
+	  $(distdir)/$(GD_TREE)/missing \
+	  $(distdir)/$(GD_TREE)/mkinstalldirs 
 
 $(libgd_a_OBJECTS): $(BUILT_SOURCES) $(ZLIB_DEPEND) $(LIBPNG_DEPEND)
 
diff --git a/Build/source/libs/gd/gd-2.0.35/config/config.guess b/Build/source/libs/gd/gd-2.0.35/config/config.guess
deleted file mode 100755
index da833146088..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/config.guess
+++ /dev/null
@@ -1,1561 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
-
-timestamp='2009-04-27'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    s390x:SunOS:*:*)
-	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval $set_cc_for_build
-	SUN_ARCH="i386"
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH="x86_64"
-	    fi
-	fi
-	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[456])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit ;;
-    *:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    *:Interix*:[3456]*)
-    	case ${UNAME_MACHINE} in
-	    x86)
-		echo i586-pc-interix${UNAME_RELEASE}
-		exit ;;
-	    EM64T | authenticamd | genuineintel)
-		echo x86_64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	esac ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    arm*:Linux:*:*)
-	eval $set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
-	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit ;;
-    xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-        exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-    i*86:AROS:*:*)
-	echo ${UNAME_MACHINE}-pc-aros
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/config.rpath b/Build/source/libs/gd/gd-2.0.35/config/config.rpath
deleted file mode 100644
index 5ead7586a7c..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/config.rpath
+++ /dev/null
@@ -1,513 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-#   Copyright 1996-2002 Free Software Foundation, Inc.
-#   Taken from GNU libtool, 2001
-#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-#   General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program; if not, write to the Free Software
-#   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#   As a special exception to the GNU General Public License, if you
-#   distribute this file as part of a program that contains a
-#   configuration script generated by Autoconf, you may include it under
-#   the same distribution terms that you use for the rest of that program.
-#
-# The first argument passed to this file is the canonical host specification,
-#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-shlibext=
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-wl=
-if test "$GCC" = yes; then
-  wl='-Wl,'
-else
-  case "$host_os" in
-    aix3* | aix4* | aix5*)
-      wl='-Wl,'
-      ;;
-    hpux9* | hpux10* | hpux11*)
-      wl='-Wl,'
-      ;;
-    irix5* | irix6*)
-      wl='-Wl,'
-      ;;
-    linux*)
-      echo '__INTEL_COMPILER' > conftest.$ac_ext
-      if $CC -E conftest.$ac_ext >/dev/null | grep __INTEL_COMPILER >/dev/null
-      then
-        :
-      else
-        # Intel icc
-        wl='-Qoption,ld,'
-      fi
-      ;;
-    osf3* | osf4* | osf5*)
-      wl='-Wl,'
-      ;;
-    solaris*)
-      wl='-Wl,'
-      ;;
-    sunos4*)
-      wl='-Qoption ld '
-      ;;
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      if test "x$host_vendor" = xsni; then
-        wl='-LD'
-      else
-        wl='-Wl,'
-      fi
-      ;;
-  esac
-fi
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  case "$host_os" in
-    aix3* | aix4* | aix5*)
-      # On AIX, the GNU linker is very broken
-      ld_shlibs=no
-      ;;
-    amigaos*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can use
-      # them.
-      ld_shlibs=no
-      ;;
-    beos*)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    cygwin* | mingw* | pw32*)
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    solaris* | sysv5*)
-      if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-        ld_shlibs=no
-      elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    sunos4*)
-      hardcode_direct=yes
-      ;;
-    *)
-      if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-  esac
-  if test "$ld_shlibs" = yes; then
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-  fi
-else
-  case "$host_os" in
-    aix3*)
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        hardcode_direct=unsupported
-      fi
-      ;;
-    aix4* | aix5*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-      else
-        aix_use_runtimelinking=no
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[23]|aix4.[23].*|aix5*)
-          for ld_flag in $LDFLAGS; do
-            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-              aix_use_runtimelinking=yes
-              break
-            fi
-          done
-        esac
-      fi
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[012]|aix4.[012].*)
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" && \
-            strings "$collect2name" | grep resolve_lib_name >/dev/null
-          then
-            # We have reworked collect2
-            hardcode_direct=yes
-          else
-            # We have old collect2
-            hardcode_direct=unsupported
-            hardcode_minus_L=yes
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_libdir_separator=
-          fi
-        esac
-      fi
-      if test "$aix_use_runtimelinking" = yes; then
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      else
-        if test "$host_cpu" = ia64; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-        else
-          hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-        fi
-      fi
-      ;;
-    amigaos*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
-      ;;
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      libext=lib
-      ;;
-    darwin* | rhapsody*)
-      hardcode_direct=yes
-      ;;
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-    freebsd2.2*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    freebsd2*)
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    freebsd*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    hpux9* | hpux10* | hpux11*)
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-      hardcode_minus_L=yes # Not in the search PATH, but as the default
-                           # location of the library.
-      ;;
-    irix5* | irix6*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    netbsd*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    newsos6)
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    openbsd*)
-      hardcode_direct=yes
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      else
-        case "$host_os" in
-          openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-            hardcode_libdir_flag_spec='-R$libdir'
-            ;;
-          *)
-            hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-            ;;
-        esac
-      fi
-      ;;
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      ;;
-    osf3*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    osf4* | osf5*)
-      if test "$GCC" = yes; then
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-        # Both cc and cxx compiler support -rpath directly
-        hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
-    sco3.2v5*)
-      ;;
-    solaris*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      ;;
-    sunos4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    sysv4)
-      if test "x$host_vendor" = xsno; then
-        hardcode_direct=yes # is this really true???
-      else
-        hardcode_direct=no # Motorola manual says yes, but my tests say they lie
-      fi
-      ;;
-    sysv4.3*)
-      ;;
-    sysv5*)
-      hardcode_libdir_flag_spec=
-      ;;
-    uts4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    dgux*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        ld_shlibs=yes
-      fi
-      ;;
-    sysv4.2uw2*)
-      hardcode_direct=yes
-      hardcode_minus_L=no
-      ;;
-    sysv5uw7* | unixware7*)
-      ;;
-    *)
-      ld_shlibs=no
-      ;;
-  esac
-fi
-
-# Check dynamic linker characteristics
-libname_spec='lib$name'
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-case "$host_os" in
-  aix3*)
-    shlibext=so
-    ;;
-  aix4* | aix5*)
-    shlibext=so
-    ;;
-  amigaos*)
-    shlibext=ixlibrary
-    ;;
-  beos*)
-    shlibext=so
-    ;;
-  bsdi4*)
-    shlibext=so
-    sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-    sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-    ;;
-  cygwin* | mingw* | pw32*)
-    case $GCC,$host_os in
-      yes,cygwin*)
-        shlibext=dll.a
-        ;;
-      yes,mingw*)
-        shlibext=dll
-        sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
-        ;;
-      yes,pw32*)
-        shlibext=dll
-        ;;
-      *)
-        shlibext=dll
-        ;;
-    esac
-    ;;
-  darwin* | rhapsody*)
-    shlibext=dylib
-    ;;
-  freebsd1*)
-    ;;
-  freebsd*)
-    shlibext=so
-    ;;
-  gnu*)
-    shlibext=so
-    ;;
-  hpux9* | hpux10* | hpux11*)
-    shlibext=sl
-    ;;
-  irix5* | irix6*)
-    shlibext=so
-    case "$host_os" in
-      irix5*)
-        libsuff= shlibsuff=
-        ;;
-      *)
-        case $LD in
-          *-32|*"-32 ") libsuff= shlibsuff= ;;
-          *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 ;;
-          *-64|*"-64 ") libsuff=64 shlibsuff=64 ;;
-          *) libsuff= shlibsuff= ;;
-        esac
-        ;;
-    esac
-    sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-    sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-    ;;
-  linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-    ;;
-  linux-gnu*)
-    shlibext=so
-    ;;
-  netbsd*)
-    shlibext=so
-    ;;
-  newsos6)
-    shlibext=so
-    ;;
-  openbsd*)
-    shlibext=so
-    ;;
-  os2*)
-    libname_spec='$name'
-    shlibext=dll
-    ;;
-  osf3* | osf4* | osf5*)
-    shlibext=so
-    sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-    sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-    ;;
-  sco3.2v5*)
-    shlibext=so
-    ;;
-  solaris*)
-    shlibext=so
-    ;;
-  sunos4*)
-    shlibext=so
-    ;;
-  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-    shlibext=so
-    case "$host_vendor" in
-      motorola)
-        sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-        ;;
-    esac
-    ;;
-  uts4*)
-    shlibext=so
-    ;;
-  dgux*)
-    shlibext=so
-    ;;
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      shlibext=so
-    fi
-    ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_sys_lib_search_path_spec=`echo "X$sys_lib_search_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_sys_lib_dlsearch_path_spec=`echo "X$sys_lib_dlsearch_path_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec="$escaped_sys_lib_search_path_spec"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="$escaped_sys_lib_dlsearch_path_spec"
-
-EOF
diff --git a/Build/source/libs/gd/gd-2.0.35/config/config.sub b/Build/source/libs/gd/gd-2.0.35/config/config.sub
deleted file mode 100755
index a39437d0158..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/config.sub
+++ /dev/null
@@ -1,1686 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Free Software Foundation, Inc.
-
-timestamp='2009-04-17'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
- 	-chorusrdb)
- 		os=-chorusrdb
-		basic_machine=$1
- 		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| lm32 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
-	| mips64vr | mips64vrel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| moxie \
-	| mt \
-	| msp430 \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k | z80)
-		basic_machine=$basic_machine-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| lm32-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
-	| tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-    	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-        cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
-	tile*)
-		basic_machine=tile-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -kopensolaris* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-        -os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-        -tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-        score-*)
-		os=-elf
-		;;
-        spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        c4x-* | tic4x-*)
-        	os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-        mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-    	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/depcomp b/Build/source/libs/gd/gd-2.0.35/config/depcomp
deleted file mode 100755
index 20164e43714..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/depcomp
+++ /dev/null
@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/install-sh b/Build/source/libs/gd/gd-2.0.35/config/install-sh
deleted file mode 100755
index 6781b987bdb..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/install-sh
+++ /dev/null
@@ -1,520 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2009-04-28.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	-*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/ltmain.sh b/Build/source/libs/gd/gd-2.0.35/config/ltmain.sh
deleted file mode 100644
index 8f7a6ac10d7..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/ltmain.sh
+++ /dev/null
@@ -1,6971 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# define SED for historic ltconfig's generated by Libtool 1.3
-test -z "$SED" && SED=sed
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.22
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
-  setopt NO_GLOB_SUBST
-fi
-# Same for EGREP, and just to be sure, do LTCC as well
-if test "X$EGREP" = X ; then
-    EGREP=egrep
-fi
-if test "X$LTCC" = X ; then
-    LTCC=${CC-gcc}
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-if test -z "$max_cmd_len"; then
-  i=0
-  testring="ABCD"
-  new_result=
-  
-  # If test is not a shell built-in, we'll probably end up computing a
-  # maximum length that is only half of the actual maximum length, but
-  # we can't tell.
-  while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
-             = "XX$testring") >/dev/null 2>&1 &&
-          new_result=`expr "X$testring" : ".*" 2>&1` &&
-          max_cmd_len="$new_result" &&
-          test "$i" != 17 # 1/2 MB should be enough
-  do
-    i=`expr $i + 1`
-    testring="$testring$testring"
-  done
-  testring=
-  # Add a significant safety factor because C++ compilers can tack on massive
-  # amounts of additional arguments before passing them to the linker.
-  # It appears as though 1/2 is a usable value.
-  max_cmd_len=`expr $max_cmd_len \/ 2`
-fi
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
-    fi
-
-    $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
-	    trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"`
-	    # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
-	    extendcc=${host}-${CC}
-	    # and sometimes libtool has CC=<OLDHOST>-gcc but user has CC=<NEWHOST>-gcc  
-	    # (Gentoo-specific hack because we always export $CHOST)
-	    mungedcc=${CHOST-${host}}-${trimedcc}
-	    case "$@ " in
-	      "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\
-	      "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
-	      tagname=CC
-	      break ;;
-	      "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\
-	      "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\
-	      "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
-    fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xdir="$my_gentop/$my_xlib"
-
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    $echo
-    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
-    $echo "This is free software; see the source for copying conditions.  There is NO"
-    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-    done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    $echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
-    else
-      $echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
-    else
-      $echo "disable static libraries"
-    fi
-    exit $?
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
-	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
-	  done
-	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
-	  continue
-	  ;;
-
-	* )
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
-      ;;
-    target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *)
-      # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
-    lobj=${xdir}$objdir/$objname
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$srcfile" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-      $echo "$srcfile" > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
-      fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
-    fi
-
-    $run $mv "${libobj}T" "${libobj}"
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  prev=
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
-	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
-	prev=xcompiler
-	continue
-	;;
-
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -pg pass through profiling flag for GCC
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
-      -t[45]*|-txscale*|@*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
-
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    compiler_flags="$compiler_flags $deplib"
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		  library_names=
-		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-	        ;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
-		;;
-	      pass_all)
-		valid_a_lib=yes
-		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  fi
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
-	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $echo "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
-	      else
-	        add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
-		case $host in
-		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
-		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
-		  fi
-		  path=""
-		  ;;
-		*)
-		  path="-L$path"
-		  ;;
-		esac
-		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
-	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  darwin|linux|osf|windows)
-	    current=`expr $number_major + $number_minor`
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
-	    age="$number_minor"
-	    revision="$number_minor"
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  major=`expr $current - $age + 1`
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=.`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
-		   continue
-		 fi
-	       fi
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
-	  if test "$?" -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" -ne "0"; then
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
-		    i=""
-		    ;;
-		  esac
-	        fi
-		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
-		# Did it work?
-		if test "$?" -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      # It is ok to link against an archive when
-		      # building a shared library.
-		      if $AR -t $potlib > /dev/null 2>&1; then
-		        newdeplibs="$newdeplibs $a_deplib"
-		        a_deplib=""
-		        break 2
-		      fi
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
-	    done
-	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
-
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
-	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
-	  fi
-	fi
-	
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
-
-	  $echo "creating a temporary reloadable object file: $output"
-
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
-	    fi
-	  fi
-
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
-
-      case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-            else
-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-            ;;
-          esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $exit_status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable(const char * path)
-{
-  struct stat st;
-
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-
-      # Make sure env LD_LIBRARY_PATH does not mess us up
-      if test -n \"\${LD_LIBRARY_PATH+set}\"; then
-        export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH
-      fi
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
-
-	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
-      else
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
-
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
-	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
-	    esac
-	  done
-	fi
-
-	eval cmds=\"$old_archive_cmds\"
-
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-		if test "X$EGREP" = X ; then
-			EGREP=egrep
-		fi
-		# We do not want portage's install root ($D) present.  Check only for
-		# this if the .la is being installed.
-		if test "$installed" = yes && test "$D"; then
-		  eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
-		else
-		  mynewdependency_lib="$libdir/$name"
-		fi
-		# Do not add duplicates
-		if test "$mynewdependency_lib"; then
-		  my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
-		  if test -z "$my_little_ninja_foo_1"; then
-		    newdependency_libs="$newdependency_libs $mynewdependency_lib"
-		  fi
-		fi
-		;;
-		  *)
-		if test "$installed" = yes; then
-		  # Rather use S=WORKDIR if our version of portage supports it.
-		  # This is because some ebuild (gcc) do not use $S as buildroot.
-		  if test "$PWORKDIR"; then
-		    S="$PWORKDIR"
-		  fi
-		  # We do not want portage's build root ($S) present.
-		  my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"`
-		  # We do not want portage's install root ($D) present.
-		  my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"`
-		  if test -n "$my_little_ninja_foo_2" && test "$S"; then
-		    mynewdependency_lib=""
-		  elif test -n "$my_little_ninja_foo_3" && test "$D"; then
-		    eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
-		  else
-		    mynewdependency_lib="$deplib"
-		  fi
-		else
-		  mynewdependency_lib="$deplib"
-		fi
-		# Do not add duplicates
-		if test "$mynewdependency_lib"; then
-		  my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
-		  if test -z "$my_little_ninja_foo_4"; then
-			newdependency_libs="$newdependency_libs $mynewdependency_lib"
-		  fi
-		fi
-		;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlfiles="$newdlfiles $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlprefiles="$newdlprefiles $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  # Do not add duplicates
-	  if test "$installed" = yes && test "$D"; then
-	    install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
-	  fi
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    rmdirs=
-
-    origobjdir="$objdir"
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$origobjdir"
-      else
-	objdir="$dir/$origobjdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
-	  case "$mode" in
-	  clean)
-	    case "  $library_names " in
-	    # "  " in the beginning catches empty $dlname
-	    *" $dlname "*) ;;
-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
-	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-	    ;;
-	  uninstall)
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	    ;;
-	  esac
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
-	  # Read the .lo file
-	  . $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-    objdir="$origobjdir"
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/missing b/Build/source/libs/gd/gd-2.0.35/config/missing
deleted file mode 100755
index 727cfa0a15e..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/missing
+++ /dev/null
@@ -1,376 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/config/mkinstalldirs b/Build/source/libs/gd/gd-2.0.35/config/mkinstalldirs
deleted file mode 100755
index 4191a45dbd7..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/config/mkinstalldirs
+++ /dev/null
@@ -1,162 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-
-scriptversion=2009-04-28.21; # UTC
-
-# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain.
-#
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-IFS=" ""	$nl"
-errstatus=0
-dirmode=
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
-
-Create each directory DIR (with mode MODE, if specified), including all
-leading file name components.
-
-Report bugs to <bug-automake@gnu.org>."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage"
-      exit $?
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --version)
-      echo "$0 $scriptversion"
-      exit $?
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
-# mkdir -p a/c at the same time, both will detect that a is missing,
-# one will create a, then the other will try to create a and die with
-# a "File exists" error.  This is a problem when calling mkinstalldirs
-# from a parallel make.  We use --version in the probe to restrict
-# ourselves to GNU mkdir, which is thread-safe.
-case $dirmode in
-  '')
-    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    else
-      # On NextStep and OpenStep, the `mkdir' command does not
-      # recognize any option.  It will interpret all options as
-      # directories to create, and then abort because `.' already
-      # exists.
-      test -d ./-p && rmdir ./-p
-      test -d ./--version && rmdir ./--version
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
-       test ! -d ./--version; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    else
-      # Clean up after NextStep and OpenStep mkdir.
-      for d in ./-m ./-p ./--version "./$dirmode";
-      do
-        test -d $d && rmdir $d
-      done
-    fi
-    ;;
-esac
-
-for file
-do
-  case $file in
-    /*) pathcomp=/ ;;
-    *)  pathcomp= ;;
-  esac
-  oIFS=$IFS
-  IFS=/
-  set fnord $file
-  shift
-  IFS=$oIFS
-
-  for d
-  do
-    test "x$d" = x && continue
-
-    pathcomp=$pathcomp$d
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-	errstatus=$lasterr
-      else
-	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-	  lasterr=
-	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-	  if test ! -z "$lasterr"; then
-	    errstatus=$lasterr
-	  fi
-	fi
-      fi
-    fi
-
-    pathcomp=$pathcomp/
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/libs/gd/gd-2.0.35/depcomp b/Build/source/libs/gd/gd-2.0.35/depcomp
deleted file mode 100644
index 20164e43714..00000000000
--- a/Build/source/libs/gd/gd-2.0.35/depcomp
+++ /dev/null
@@ -1,630 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/Build/source/libs/icu/Makefile.am b/Build/source/libs/icu/Makefile.am
index 9d870eef8e7..78f055bdf73 100644
--- a/Build/source/libs/icu/Makefile.am
+++ b/Build/source/libs/icu/Makefile.am
@@ -36,9 +36,17 @@ icu-build/Makefile: $(noinst_DATA)
 	  echo "make: running $(SHELL) $$cmd" && \
 	  eval $(SHELL) $$cmd)
 
-.PHONY: icubuild
-icubuild: icu-build/Makefile
+.PHONY: icubuild check-makeflags
+icubuild: icu-build/Makefile check-makeflags
 	cd icu-build && $(MAKE) $(AM_MAKEFLAGS) all
+check-makeflags:
+	@for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    CFLAGS=* | CPPFLAGS=* | CXXFLAGS=* | LDFLAGS=*) \
+	      echo "Sorry, the icu-xetex build systems disallows \`make $$f'."; \
+	      exit 1;; \
+	  esac; \
+	done
 
 distclean-local:
 	rm -rf icu-build
diff --git a/Build/source/libs/icu/Makefile.in b/Build/source/libs/icu/Makefile.in
index 4931a6d39a7..fd54483d180 100644
--- a/Build/source/libs/icu/Makefile.in
+++ b/Build/source/libs/icu/Makefile.in
@@ -593,9 +593,17 @@ icu-build/Makefile: $(noinst_DATA)
 	  echo "make: running $(SHELL) $$cmd" && \
 	  eval $(SHELL) $$cmd)
 
-.PHONY: icubuild
-icubuild: icu-build/Makefile
+.PHONY: icubuild check-makeflags
+icubuild: icu-build/Makefile check-makeflags
 	cd icu-build && $(MAKE) $(AM_MAKEFLAGS) all
+check-makeflags:
+	@for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    CFLAGS=* | CPPFLAGS=* | CXXFLAGS=* | LDFLAGS=*) \
+	      echo "Sorry, the icu-xetex build systems disallows \`make $$f'."; \
+	      exit 1;; \
+	  esac; \
+	done
 
 distclean-local:
 	rm -rf icu-build
diff --git a/Build/source/texk/Makefile.am b/Build/source/texk/Makefile.am
index 1345991963f..f5f20ba7c95 100644
--- a/Build/source/texk/Makefile.am
+++ b/Build/source/texk/Makefile.am
@@ -22,13 +22,13 @@ DISTCLEANFILES = $(noinst_DATA)
 all-local: subtexk
 
 .PHONY: subtexk
-## We must configure all texk subdirs since 'make dist' needs the Makefile.
-## For those not required for the current set of configure options
-## we append '--disable-build' so they can skip tests that would
-## fail because, e.g., some libraries were not built.
-
-## Sequentially configure and optionally build all texk subdirs;
-## code inspired by automake's way to handle recursive targets.
+# We must configure all texk subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because, e.g., some required libraries were not built.
+#
+# Sequentially configure and optionally build all texk subdirs;
+# code inspired by automake's way to handle recursive targets.
 subtexk: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/texk/Makefile.in b/Build/source/texk/Makefile.in
index 869650da7ce..86f31f14036 100644
--- a/Build/source/texk/Makefile.in
+++ b/Build/source/texk/Makefile.in
@@ -672,7 +672,13 @@ dist-hook:
 all-local: subtexk
 
 .PHONY: subtexk
-
+# We must configure all texk subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because, e.g., some required libraries were not built.
+#
+# Sequentially configure and optionally build all texk subdirs;
+# code inspired by automake's way to handle recursive targets.
 subtexk: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/texk/configure b/Build/source/texk/configure
index 9b24285ab9d..da8600f180a 100755
--- a/Build/source/texk/configure
+++ b/Build/source/texk/configure
@@ -693,7 +693,7 @@ enable_t1utils
 enable_tpic2pdftex
 enable_vlna
 enable_xindy
-enable_xindy_make_rules
+enable_xindy_rules
 enable_xindy_docs
 with_xindy_recode
 enable_web2c
@@ -1478,9 +1478,8 @@ Optional Features:
   --disable-tpic2pdftex   do not build the tpic2pdftex package
   --disable-vlna          do not build the vlna package
   --enable-xindy          build the xindy package
-  --enable-xindy-make-rules build and install make-rules package (default is
-                            YES)
-  --enable-xindy-docs       build and install documentation (default is YES)
+  --enable-xindy-rules      build and install make-rules package
+  --enable-xindy-docs       build and install documentation
   --disable-web2c         do not build the web2c (TeX & Co.) package
   --enable-auto-core        cause TeX&MF to dump core, given a certain
                             filename
@@ -2363,9 +2362,9 @@ esac
 
 ## utils/xindy/ac/xindy.ac: configure.ac fragment for the TeX Live subdirectory utils/xindy/
 ## configure options for xindy
-# Check whether --enable-xindy-make-rules was given.
-if test "${enable_xindy_make_rules+set}" = set; then
-  enableval=$enable_xindy_make_rules;
+# Check whether --enable-xindy-rules was given.
+if test "${enable_xindy_rules+set}" = set; then
+  enableval=$enable_xindy_rules;
 fi
 # Check whether --enable-xindy-docs was given.
 if test "${enable_xindy_docs+set}" = set; then
diff --git a/Build/source/texk/texlive/linked_scripts/Makefile.am b/Build/source/texk/texlive/linked_scripts/Makefile.am
index 8a895450133..3c9ebbc1bd3 100644
--- a/Build/source/texk/texlive/linked_scripts/Makefile.am
+++ b/Build/source/texk/texlive/linked_scripts/Makefile.am
@@ -11,19 +11,19 @@ bin_SCRIPTS =
 
 ## Copies of these scripts exist here for the sake of avoiding
 ## dangling symlinks produced by `make install'.
-## The instances in texmf* or are the masters (except when it is CTAN).
+## The instances in texmf* are the masters (except when it is CTAN).
 
 scriptxdir = ${prefix}/texmf/scripts
 nobase_dist_scriptx_SCRIPTS = \
 	a2ping/a2ping.pl \
 	epstopdf/epstopdf.pl \
+	getnonfreefonts/getnonfreefonts.pl \
 	pkfix/pkfix.pl \
 	ps2eps/ps2eps.pl \
 	simpdftex/simpdftex \
 	tetex/e2pall.pl \
 	tetex/texdoctk.pl \
 	texdoc/texdoc.tlu \
-	getnonfreefonts/getnonfreefonts.pl \
 	texlive/rungs.tlu \
 	texlive/tlmgr.pl
 
diff --git a/Build/source/texk/texlive/linked_scripts/Makefile.in b/Build/source/texk/texlive/linked_scripts/Makefile.in
index 32035ed878b..62abe7bf2ef 100644
--- a/Build/source/texk/texlive/linked_scripts/Makefile.in
+++ b/Build/source/texk/texlive/linked_scripts/Makefile.in
@@ -145,13 +145,13 @@ scriptxdir = ${prefix}/texmf/scripts
 nobase_dist_scriptx_SCRIPTS = \
 	a2ping/a2ping.pl \
 	epstopdf/epstopdf.pl \
+	getnonfreefonts/getnonfreefonts.pl \
 	pkfix/pkfix.pl \
 	ps2eps/ps2eps.pl \
 	simpdftex/simpdftex \
 	tetex/e2pall.pl \
 	tetex/texdoctk.pl \
 	texdoc/texdoc.tlu \
-	getnonfreefonts/getnonfreefonts.pl \
 	texlive/rungs.tlu \
 	texlive/tlmgr.pl
 
diff --git a/Build/source/utils/Makefile.am b/Build/source/utils/Makefile.am
index 7786c13bb99..33d6ca77614 100644
--- a/Build/source/utils/Makefile.am
+++ b/Build/source/utils/Makefile.am
@@ -22,13 +22,13 @@ DISTCLEANFILES = $(noinst_DATA)
 all-local: subutils
 
 .PHONY: subutils
-## We must configure all utils subdirs since 'make dist' needs the Makefile.
-## For those not required for the current set of configure options
-## we append '--disable-build' so they can skip tests that would
-## fail because, e.g., some libraries were not built.
-
-## Sequentially configure and optionally build all utils subdirs;
-## code inspired by automake's way to handle recursive targets.
+# We must configure all utils subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because, e.g., some required libraries were not built.
+#
+# Sequentially configure and optionally build all utils subdirs;
+# code inspired by automake's way to handle recursive targets.
 subutils: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/utils/Makefile.in b/Build/source/utils/Makefile.in
index be6b8bc10e4..f9edecacc1a 100644
--- a/Build/source/utils/Makefile.in
+++ b/Build/source/utils/Makefile.in
@@ -672,7 +672,13 @@ dist-hook:
 all-local: subutils
 
 .PHONY: subutils
-
+# We must configure all utils subdirs since 'make dist' needs the Makefile.
+# For those not required for the current set of configure options
+# we append '--disable-build' so they can skip tests that would
+# fail because, e.g., some required libraries were not built.
+#
+# Sequentially configure and optionally build all utils subdirs;
+# code inspired by automake's way to handle recursive targets.
 subutils: $(noinst_DATA)
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
diff --git a/Build/source/utils/configure b/Build/source/utils/configure
index 6721948e0d8..4b11578b530 100755
--- a/Build/source/utils/configure
+++ b/Build/source/utils/configure
@@ -693,7 +693,7 @@ enable_t1utils
 enable_tpic2pdftex
 enable_vlna
 enable_xindy
-enable_xindy_make_rules
+enable_xindy_rules
 enable_xindy_docs
 with_xindy_recode
 enable_web2c
@@ -1456,9 +1456,8 @@ Optional Features:
   --disable-tpic2pdftex   do not build the tpic2pdftex package
   --disable-vlna          do not build the vlna package
   --enable-xindy          build the xindy package
-  --enable-xindy-make-rules build and install make-rules package (default is
-                            YES)
-  --enable-xindy-docs       build and install documentation (default is YES)
+  --enable-xindy-rules      build and install make-rules package
+  --enable-xindy-docs       build and install documentation
   --disable-web2c         do not build the web2c (TeX & Co.) package
   --enable-auto-core        cause TeX&MF to dump core, given a certain
                             filename
@@ -2341,9 +2340,9 @@ esac
 
 ## utils/xindy/ac/xindy.ac: configure.ac fragment for the TeX Live subdirectory utils/xindy/
 ## configure options for xindy
-# Check whether --enable-xindy-make-rules was given.
-if test "${enable_xindy_make_rules+set}" = set; then
-  enableval=$enable_xindy_make_rules;
+# Check whether --enable-xindy-rules was given.
+if test "${enable_xindy_rules+set}" = set; then
+  enableval=$enable_xindy_rules;
 fi
 # Check whether --enable-xindy-docs was given.
 if test "${enable_xindy_docs+set}" = set; then
diff --git a/Build/source/utils/xindy/ChangeLog.TL b/Build/source/utils/xindy/ChangeLog.TL
index 04579f239f7..1ab09c5e330 100644
--- a/Build/source/utils/xindy/ChangeLog.TL
+++ b/Build/source/utils/xindy/ChangeLog.TL
@@ -1,6 +1,11 @@
 ChangeLog.TL: Changes for xindy (teTeX / TeX Live)
 ======================================================
 
+2009-05-18  Peter Breitenlohner  <peb@mppmu.mpg.de>
+
+	* configure.ac, ac/xindy.ac: Reorganize for dual use:
+	xindy in TL and standalone xindy. Adjust enable/disable.
+
 2009-05-09  Peter Breitenlohner  <peb@mppmu.mpg.de>
 
 	* configure.ac: Check for PERL, LATEX, and PDFLATEX.
diff --git a/Build/source/utils/xindy/Makefile.in b/Build/source/utils/xindy/Makefile.in
index 5fde691c17b..8113a9dd774 100644
--- a/Build/source/utils/xindy/Makefile.in
+++ b/Build/source/utils/xindy/Makefile.in
@@ -47,10 +47,8 @@ DIST_COMMON = $(am__configure_deps) \
 	../../build-aux/texinfo.tex ../../build-aux/ylwrap AUTHORS \
 	COPYING INSTALL NEWS
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -102,6 +100,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -177,7 +176,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -186,7 +184,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/ac/xindy.ac b/Build/source/utils/xindy/ac/xindy.ac
index 137572739a4..8ea4ad6fa61 100644
--- a/Build/source/utils/xindy/ac/xindy.ac
+++ b/Build/source/utils/xindy/ac/xindy.ac
@@ -5,13 +5,13 @@ dnl You may freely use, modify and/or distribute this file.
 dnl
 ## configure options for xindy
 m4_define_default([kpse_indent_26], [26])[]dnl
-AC_ARG_ENABLE([xindy-make-rules],
-              AS_HELP_STRING([--enable-xindy-make-rules],
-                             [build and install make-rules package (default is YES)],
+AC_ARG_ENABLE([xindy-rules],
+              AS_HELP_STRING([--enable-xindy-rules],
+                             [build and install make-rules package],
                              kpse_indent_26))[]dnl
 AC_ARG_ENABLE([xindy-docs],
               AS_HELP_STRING([--enable-xindy-docs],
-                             [build and install documentation (default is YES)],
+                             [build and install documentation],
                              kpse_indent_26))[]dnl
 AC_ARG_WITH([xindy-recode],
             AS_HELP_STRING([--with-xindy-recode],
diff --git a/Build/source/utils/xindy/aclocal.m4 b/Build/source/utils/xindy/aclocal.m4
index 77fa274f068..42b922052dc 100644
--- a/Build/source/utils/xindy/aclocal.m4
+++ b/Build/source/utils/xindy/aclocal.m4
@@ -925,6 +925,4 @@ AC_SUBST([am__tar])
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
-m4_include([m4/ac_prog_latex.m4])
-m4_include([m4/ac_prog_pdflatex.m4])
 m4_include([m4/tl_msg_error.m4])
diff --git a/Build/source/utils/xindy/binaries/Makefile.in b/Build/source/utils/xindy/binaries/Makefile.in
index 63e7e2ac57c..b0d82bedab3 100644
--- a/Build/source/utils/xindy/binaries/Makefile.in
+++ b/Build/source/utils/xindy/binaries/Makefile.in
@@ -36,10 +36,8 @@ host_triplet = @host@
 subdir = binaries
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -68,6 +66,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -143,7 +142,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -152,7 +150,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/configure b/Build/source/utils/xindy/configure
index 4d1a86c439e..b8fe03ebfa1 100755
--- a/Build/source/utils/xindy/configure
+++ b/Build/source/utils/xindy/configure
@@ -655,10 +655,8 @@ CLISP_LIB
 CLISP
 BUILDDOCS_FALSE
 BUILDDOCS_TRUE
-pdflatex
 BUILDRULES_FALSE
 BUILDRULES_TRUE
-latex
 TETEX_BUILD_FALSE
 TETEX_BUILD_TRUE
 CONVERT_FROM_UTF8
@@ -752,7 +750,7 @@ ac_user_opts='
 enable_option_checking
 enable_maintainer_mode
 enable_dependency_tracking
-enable_xindy_make_rules
+enable_xindy_rules
 enable_xindy_docs
 with_xindy_recode
 '
@@ -1399,10 +1397,8 @@ Optional Features:
 			  (and sometimes confusing) to the casual installer
   --disable-dependency-tracking  speeds up one-time build
   --enable-dependency-tracking   do not reject slow dependency extractors
-  --enable-xindy-make-rules
-                          build and install make-rules package (default is
-                          YES)
-  --enable-xindy-docs     build and install documentation (default is YES)
+  --enable-xindy-rules    build and install make-rules package
+  --enable-xindy-docs     build and install documentation
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
@@ -1900,6 +1896,7 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
 
+
 am__api_version='1.10'
 
 # Find a good install program.  We prefer a C program (faster),
@@ -3957,12 +3954,14 @@ done
 test -n "$PDFLATEX" || PDFLATEX="no"
 
 
-# Include onfigure options that also appear at the top-level of the TL tree.
+{ $as_echo "$as_me:$LINENO: Configuring xindy as part of the TeX Live tree" >&5
+$as_echo "$as_me: Configuring xindy as part of the TeX Live tree" >&6;}
+# Include configure options that also appear at the top-level of the TL tree.
 ## utils/xindy/ac/xindy.ac: configure.ac fragment for the TeX Live subdirectory utils/xindy/
 ## configure options for xindy
-# Check whether --enable-xindy-make-rules was given.
-if test "${enable_xindy_make_rules+set}" = set; then
-  enableval=$enable_xindy_make_rules;
+# Check whether --enable-xindy-rules was given.
+if test "${enable_xindy_rules+set}" = set; then
+  enableval=$enable_xindy_rules;
 fi
 # Check whether --enable-xindy-docs was given.
 if test "${enable_xindy_docs+set}" = set; then
@@ -3974,8 +3973,11 @@ if test "${with_xindy_recode+set}" = set; then
   withval=$with_xindy_recode;
 fi
 
+test "x$enable_xindy_rules" = xyes || enable_xindy_rules=no
+test "x$enable_xindy_docs" = xyes || enable_xindy_docs=no
+
 
-# This option haqs been renamed --enable-native-texlive-build
+# This option has been renamed --enable-native-texlive-build
 # but should only be inherited and not specified here
 # AC_ARG_ENABLE(tetex-build, AS_HELP_STRING([--enable-tetex-build],[Build as part of a TeX Live installation]))
 
@@ -4034,17 +4036,6 @@ $as_echo "$as_me: Using installation layout for TeX Live" >&6;}
   datadir="$prefix/texmf"
   docdir="$prefix/texmf/doc/$PACKAGE_NAME"
   mandir="$prefix/texmf/doc/man"
-  if test -z "$enable_xindy_docs"; then
-    { $as_echo "$as_me:$LINENO: Disabling docs building" >&5
-$as_echo "$as_me: Disabling docs building" >&6;}
-    enable_xindy_docs=no;
-  fi
-#  if test -z "$enable_xindy_make_rules"; then
-#    AC_MSG_NOTICE([Disabling make-rules building])
-#    enable_xindy_make_rules=no;
-#  fi
-else
-  enable_native_texlive_build=no
 fi
  if test "x$enable_native_texlive_build" = xyes; then
   TETEX_BUILD_TRUE=
@@ -4055,143 +4046,58 @@ else
 fi
 
 
-if test "x$enable_xindy_make_rules" != xno; then
-
-for ac_prog in latex elatex lambda
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_latex+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$latex"; then
-  ac_cv_prog_latex="$latex" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_latex="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-latex=$ac_cv_prog_latex
-if test -n "$latex"; then
-  { $as_echo "$as_me:$LINENO: result: $latex" >&5
-$as_echo "$latex" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$latex" && break
-done
-test -n "$latex" || latex="no"
-
-export latex;
-if test $latex = "no" ;
-then
-	if test "x$enable_build" = xno; then
+if test "x$enable_xindy_rules" != xno; then
+  if text "x$PERL" = xno; then
+    if test "x$enable_build" = xno; then
   { $as_echo "$as_me:$LINENO: WARNING: building xindy has been disabled and would fail because
-Unable to find a LaTeX application" >&5
+Unable to find a Perl application, required to build rules" >&5
 $as_echo "$as_me: WARNING: building xindy has been disabled and would fail because
-Unable to find a LaTeX application" >&2;}
+Unable to find a Perl application, required to build rules" >&2;}
 else
-  { { $as_echo "$as_me:$LINENO: error: Unable to find a LaTeX application" >&5
-$as_echo "$as_me: error: Unable to find a LaTeX application" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: Unable to find a Perl application, required to build rules" >&5
+$as_echo "$as_me: error: Unable to find a Perl application, required to build rules" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 
-fi
-
-
-fi
-
- if test "x$enable_xindy_make_rules" != xno; then
-  BUILDRULES_TRUE=
-  BUILDRULES_FALSE='#'
-else
-  BUILDRULES_TRUE='#'
-  BUILDRULES_FALSE=
-fi
-
-
-if test "x$enable_xindy_docs" != xno; then
-
-for ac_prog in pdflatex
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_pdflatex+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$pdflatex"; then
-  ac_cv_prog_pdflatex="$pdflatex" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_pdflatex="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
   fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-pdflatex=$ac_cv_prog_pdflatex
-if test -n "$pdflatex"; then
-  { $as_echo "$as_me:$LINENO: result: $pdflatex" >&5
-$as_echo "$pdflatex" >&6; }
+  if text "x$LATEX" = xno; then
+    if test "x$enable_build" = xno; then
+  { $as_echo "$as_me:$LINENO: WARNING: building xindy has been disabled and would fail because
+Unable to find a LaTeX application, required to build rules" >&5
+$as_echo "$as_me: WARNING: building xindy has been disabled and would fail because
+Unable to find a LaTeX application, required to build rules" >&2;}
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+  { { $as_echo "$as_me:$LINENO: error: Unable to find a LaTeX application, required to build rules" >&5
+$as_echo "$as_me: error: Unable to find a LaTeX application, required to build rules" >&2;}
+   { (exit 1); exit 1; }; }
 fi
 
 
-  test -n "$pdflatex" && break
-done
-test -n "$pdflatex" || pdflatex="no"
-
-export pdflatex;
-if test $pdflatex = "no" ;
-then
-	if test "x$enable_build" = xno; then
+  fi
+  if test "x$enable_xindy_docs" != xno; then
+    if text "x$PDFLATEX" = xno; then
+      if test "x$enable_build" = xno; then
   { $as_echo "$as_me:$LINENO: WARNING: building xindy has been disabled and would fail because
-Unable to find a PDFLaTeX application" >&5
+Unable to find a pdfLaTeX application, required to build rules and docs" >&5
 $as_echo "$as_me: WARNING: building xindy has been disabled and would fail because
-Unable to find a PDFLaTeX application" >&2;}
+Unable to find a pdfLaTeX application, required to build rules and docs" >&2;}
 else
-  { { $as_echo "$as_me:$LINENO: error: Unable to find a PDFLaTeX application" >&5
-$as_echo "$as_me: error: Unable to find a PDFLaTeX application" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: Unable to find a pdfLaTeX application, required to build rules and docs" >&5
+$as_echo "$as_me: error: Unable to find a pdfLaTeX application, required to build rules and docs" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 
+    fi
+  fi
 fi
-
-
+ if test "x$enable_xindy_rules" != xno; then
+  BUILDRULES_TRUE=
+  BUILDRULES_FALSE='#'
+else
+  BUILDRULES_TRUE='#'
+  BUILDRULES_FALSE=
 fi
 
  if test "x$enable_xindy_docs" != xno; then
@@ -4270,7 +4176,8 @@ fi
 else
   { $as_echo "$as_me:$LINENO: checking for clisp library directory" >&5
 $as_echo_n "checking for clisp library directory... " >&6; }
-  CLISP_LIB=`$CLISP -q -norc -x '(progn (princ *lib-directory*) (values))'`
+  # Remove trailing slash (ugly) or backslash (harmful substitution).
+  CLISP_LIB=`$CLISP -q -norc -x '(progn (princ *lib-directory*) (values))' | sed -e 's,\\/$,,'`
   { $as_echo "$as_me:$LINENO: result: $CLISP_LIB" >&5
 $as_echo "$CLISP_LIB" >&6; }
   test -f "$CLISP_LIB/clisp-link" || if test "x$enable_build" = xno; then
@@ -4312,7 +4219,6 @@ fi
 fi
 
 
-
 if test "x$EXEEXT" = "x.exe"; then
   XINDY_RUN=xindy-lisp.exe
   LISP_RUN=lisp.exe
diff --git a/Build/source/utils/xindy/configure.ac b/Build/source/utils/xindy/configure.ac
index 0d745ea6432..5f8b7f8cf91 100644
--- a/Build/source/utils/xindy/configure.ac
+++ b/Build/source/utils/xindy/configure.ac
@@ -24,9 +24,16 @@
 ## Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 ## Boston, MA 02110-1301 USA.
 
+dnl Produce different results for standalone xindy or xindy as part of
+dnl the TeX Live (TL) tree; first distinguish these two cases.
+m4_syscmd([test -f ../../texk/kpathsea/doc/kpathsea.texi])[]dnl
+m4_if(m4_sysval, [0], [m4_define([kpse_TL], [])])[]dnl
+
 AC_PREREQ([2.63])
 AC_INIT([xindy], [2.3], [xindy-discuss@lists.sourceforge.net])
+m4_ifdef([kpse_TL], [dnl For xindy as part of the TL tree
 AC_CONFIG_AUX_DIR([../../build-aux])
+])
 
 AM_INIT_AUTOMAKE([foreign dist-bzip2])
 AM_MAINTAINER_MODE
@@ -41,10 +48,29 @@ AC_CHECK_PROGS([PERL], [perl], [no])
 AC_CHECK_PROGS([LATEX], [latex elatex lambda], [no])
 AC_CHECK_PROGS([PDFLATEX], [pdflatex], [no])
 
-# Include onfigure options that also appear at the top-level of the TL tree.
-m4_include([ac/xindy.ac])
+m4_ifdef([kpse_TL], [dnl For xindy as part of the TL tree
+AC_MSG_NOTICE([Configuring xindy as part of the TeX Live tree])
+# Include configure options that also appear at the top-level of the TL tree.
+dnl We use m4_sinclude because the standalone version has no such file.
+m4_sinclude([ac/xindy.ac])
+test "x$enable_xindy_rules" = xyes || enable_xindy_rules=no
+test "x$enable_xindy_docs" = xyes || enable_xindy_docs=no
+], [dnl For standalone xindy
+AC_MSG_NOTICE([Configuring standalone xindy])
+AC_ARG_ENABLE([xindy-rules],
+              AS_HELP_STRING([--disable-xindy-rules],
+                             [do not build and install make-rules package]))[]dnl
+AC_ARG_ENABLE([xindy-docs],
+              AS_HELP_STRING([--disable-xindy-docs],
+                             [do not build and install documentation]))[]dnl
+AC_ARG_WITH([xindy-recode],
+            AS_HELP_STRING([--with-xindy-recode],
+                           [Use `recode' instead of `iconv' (default is NO)]))[]dnl
+test "x$enable_xindy_rules" = xno || enable_xindy_rules=yes
+test "x$enable_xindy_docs" = xno || enable_xindy_docs=yes
+])
 
-# This option haqs been renamed --enable-native-texlive-build
+# This option has been renamed --enable-native-texlive-build
 # but should only be inherited and not specified here
 # AC_ARG_ENABLE(tetex-build, AS_HELP_STRING([--enable-tetex-build],[Build as part of a TeX Live installation]))
 
@@ -64,29 +90,23 @@ if test "x$enable_native_texlive_build" = xyes; then
   datadir="$prefix/texmf"
   docdir="$prefix/texmf/doc/$PACKAGE_NAME"
   mandir="$prefix/texmf/doc/man"
-  if test -z "$enable_xindy_docs"; then
-    AC_MSG_NOTICE([Disabling docs building])
-    enable_xindy_docs=no;
-  fi
-#  if test -z "$enable_xindy_make_rules"; then
-#    AC_MSG_NOTICE([Disabling make-rules building])
-#    enable_xindy_make_rules=no;
-#  fi
-else
-  enable_native_texlive_build=no
 fi
 AM_CONDITIONAL([TETEX_BUILD],[test "x$enable_native_texlive_build" = xyes])
 
-if test "x$enable_xindy_make_rules" != xno; then
-    AC_PROG_LATEX
-fi
-
-AM_CONDITIONAL([BUILDRULES], [test "x$enable_xindy_make_rules" != xno])
-
-if test "x$enable_xindy_docs" != xno; then
-    AC_PROG_PDFLATEX
+if test "x$enable_xindy_rules" != xno; then
+  if text "x$PERL" = xno; then
+    TL_MSG_ERROR([Unable to find a Perl application, required to build rules])
+  fi
+  if text "x$LATEX" = xno; then
+    TL_MSG_ERROR([Unable to find a LaTeX application, required to build rules])
+  fi
+  if test "x$enable_xindy_docs" != xno; then
+    if text "x$PDFLATEX" = xno; then
+      TL_MSG_ERROR([Unable to find a pdfLaTeX application, required to build rules and docs])
+    fi
+  fi
 fi
-
+AM_CONDITIONAL([BUILDRULES], [test "x$enable_xindy_rules" != xno])
 AM_CONDITIONAL([BUILDDOCS], [test "x$enable_xindy_docs" != xno])
 
 AC_CHECK_PROGS([CLISP], [clisp], [no])
@@ -96,15 +116,14 @@ Please install clisp or specify the clisp executable location
 via the CLISP=... configure argument.])
 else
   AC_MSG_CHECKING([for clisp library directory])
-  CLISP_LIB=`$CLISP -q -norc -x '(progn (princ *lib-directory*) (values))'`
+  # Remove trailing slash (ugly) or backslash (harmful substitution).
+  CLISP_LIB=`$CLISP -q -norc -x '(progn (princ *lib-directory*) (values))' | sed -e 's,[\\/]$,,'`
   AC_MSG_RESULT([$CLISP_LIB])
   test -f "$CLISP_LIB/clisp-link" || TL_MSG_ERROR([clisp is not usable: expected file is not found: $CLISP_LIB/clisp-link])
   test -d "$CLISP_LIB/full" || TL_MSG_ERROR([clisp is not usable: expected directory is not found: $CLISP_LIB/full])
   test -d "$CLISP_LIB/linkkit" || TL_MSG_ERROR([clisp is not usable: expected directory is not found: $CLISP_LIB/linkkit])
 fi
 AC_SUBST(CLISP_LIB)
-dnl CLISP_LIB may end with a backslash (on mingw)
-_AM_SUBST_NOTMAKE(CLISP_LIB)
 
 if test "x$EXEEXT" = "x.exe"; then
   XINDY_RUN=xindy-lisp.exe
diff --git a/Build/source/utils/xindy/doc/Makefile.in b/Build/source/utils/xindy/doc/Makefile.in
index e341b8a235f..b301eb72288 100644
--- a/Build/source/utils/xindy/doc/Makefile.in
+++ b/Build/source/utils/xindy/doc/Makefile.in
@@ -36,10 +36,8 @@ subdir = doc
 DIST_COMMON = README $(dist_noinst_DATA) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -78,6 +76,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -153,7 +152,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -162,7 +160,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/doc/style-tutorial/Makefile.in b/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
index 527cebbf109..8327aca3b6b 100644
--- a/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
+++ b/Build/source/utils/xindy/doc/style-tutorial/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = doc/style-tutorial
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/m4/ac_prog_latex.m4 b/Build/source/utils/xindy/m4/ac_prog_latex.m4
deleted file mode 100644
index 3571f5833b0..00000000000
--- a/Build/source/utils/xindy/m4/ac_prog_latex.m4
+++ /dev/null
@@ -1,19 +0,0 @@
-dnl @synopsis AC_PROG_LATEX
-dnl
-dnl This macro test if latex is installed. If latex is installed, it
-dnl set $latex to the right value
-dnl
-dnl @category LaTeX
-dnl @author Mathieu Boretti <boretti@bss-network.com>
-dnl @version 2005-01-21
-dnl @license GPLWithACException
-
-AC_DEFUN([AC_PROG_LATEX],[
-AC_CHECK_PROGS([latex], [latex elatex lambda], [no])
-export latex;
-if test $latex = "no" ;
-then
-	TL_MSG_ERROR([Unable to find a LaTeX application])
-fi
-AC_SUBST(latex)
-])
diff --git a/Build/source/utils/xindy/m4/ac_prog_pdflatex.m4 b/Build/source/utils/xindy/m4/ac_prog_pdflatex.m4
deleted file mode 100644
index 878dc7b3007..00000000000
--- a/Build/source/utils/xindy/m4/ac_prog_pdflatex.m4
+++ /dev/null
@@ -1,19 +0,0 @@
-dnl @synopsis AC_PROG_PDFLATEX
-dnl
-dnl This macro test if pdflatex is installed. If pdflatex is installed,
-dnl it set $pdflatex to the right value
-dnl
-dnl @category LaTeX
-dnl @author Mathieu Boretti <boretti@bss-network.com>
-dnl @version 2005-01-21
-dnl @license GPLWithACException
-
-AC_DEFUN([AC_PROG_PDFLATEX],[
-AC_CHECK_PROGS([pdflatex], [pdflatex], [no])
-export pdflatex;
-if test $pdflatex = "no" ;
-then
-	TL_MSG_ERROR([Unable to find a PDFLaTeX application])
-fi
-AC_SUBST(pdflatex)
-])
diff --git a/Build/source/utils/xindy/make-rules/Makefile.in b/Build/source/utils/xindy/make-rules/Makefile.in
index 5c855f87ea7..f1b89bd371a 100644
--- a/Build/source/utils/xindy/make-rules/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules
 DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -67,6 +65,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -142,7 +141,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -151,7 +149,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/Makefile.am b/Build/source/utils/xindy/make-rules/alphabets/Makefile.am
index 4218fd0a3cb..e90382963c6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/Makefile.am
+++ b/Build/source/utils/xindy/make-rules/alphabets/Makefile.am
@@ -741,75 +741,75 @@ nodist_noinst_DATA = \
 
 %latin1.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-1 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-1 >$@
 
 %cp850.pl : %utf8.pl.in
 	sed -e 's/@.{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP850 >$@
+	$(CONVERT_FROM_UTF8)CP850 >$@
 
 romanian/latin2.pl : romanian/utf8.pl
 	sed -e 's/@u{\([^}]*\)}//g;' -f $(srcdir)/rom-comma-kludge.sed <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-2 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-2 >$@
 
 %latin2.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-2 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-2 >$@
 
 %latin3.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-3 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-3 >$@
 
 %latin4.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-4 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-4 >$@
 
 %iso88595.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-5 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-5 >$@
 
 %iso88597.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-7 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-7 >$@
 
 %iso88598.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-8 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-8 >$@
 
 %latin5.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-9 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-9 >$@
 
 %latin9.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}/\1/g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-15 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-15 >$@
 
 romanian/cp1250.pl : romanian/utf8.pl
 	sed -e 's/@u{\([^}]*\)}//g;' -f $(srcdir)/rom-comma-kludge.sed <$< | \
-	@CONVERT_FROM_UTF8@CP1250 >$@
+	$(CONVERT_FROM_UTF8)CP1250 >$@
 
 %cp1250.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1250 >$@
+	$(CONVERT_FROM_UTF8)CP1250 >$@
 
 %cp1251.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1251 >$@
+	$(CONVERT_FROM_UTF8)CP1251 >$@
 
 %cp1252.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}/\1/g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1252 >$@
+	$(CONVERT_FROM_UTF8)CP1252 >$@
 
 %isoir111.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-IR-111 >$@
+	$(CONVERT_FROM_UTF8)ISO-IR-111 >$@
 
 %koi8-r.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@KOI8-R >$@
+	$(CONVERT_FROM_UTF8)KOI8-R >$@
 
 %koi8-u.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@KOI8-U >$@
+	$(CONVERT_FROM_UTF8)KOI8-U >$@
 
 %tex.pl : %utf8.pl $(srcdir)/utf8-to-tex.sed
 	sed -f $(srcdir)/utf8-to-tex.sed <$< >$@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
index e48463959cc..013c8fb65a6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -165,6 +163,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -240,7 +239,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -249,7 +247,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
@@ -2357,75 +2354,75 @@ uninstall-am: uninstall-docDATA uninstall-nodist_albanianDATA \
 
 %latin1.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-1 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-1 >$@
 
 %cp850.pl : %utf8.pl.in
 	sed -e 's/@.{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP850 >$@
+	$(CONVERT_FROM_UTF8)CP850 >$@
 
 romanian/latin2.pl : romanian/utf8.pl
 	sed -e 's/@u{\([^}]*\)}//g;' -f $(srcdir)/rom-comma-kludge.sed <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-2 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-2 >$@
 
 %latin2.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-2 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-2 >$@
 
 %latin3.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-3 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-3 >$@
 
 %latin4.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-4 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-4 >$@
 
 %iso88595.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-5 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-5 >$@
 
 %iso88597.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-7 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-7 >$@
 
 %iso88598.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-8 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-8 >$@
 
 %latin5.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-9 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-9 >$@
 
 %latin9.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}/\1/g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-8859-15 >$@
+	$(CONVERT_FROM_UTF8)ISO-8859-15 >$@
 
 romanian/cp1250.pl : romanian/utf8.pl
 	sed -e 's/@u{\([^}]*\)}//g;' -f $(srcdir)/rom-comma-kludge.sed <$< | \
-	@CONVERT_FROM_UTF8@CP1250 >$@
+	$(CONVERT_FROM_UTF8)CP1250 >$@
 
 %cp1250.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1250 >$@
+	$(CONVERT_FROM_UTF8)CP1250 >$@
 
 %cp1251.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1251 >$@
+	$(CONVERT_FROM_UTF8)CP1251 >$@
 
 %cp1252.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;s/@9{\([^}]*\)}/\1/g;' <$< | \
-	@CONVERT_FROM_UTF8@CP1252 >$@
+	$(CONVERT_FROM_UTF8)CP1252 >$@
 
 %isoir111.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@ISO-IR-111 >$@
+	$(CONVERT_FROM_UTF8)ISO-IR-111 >$@
 
 %koi8-r.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@KOI8-R >$@
+	$(CONVERT_FROM_UTF8)KOI8-R >$@
 
 %koi8-u.pl : %utf8.pl.in
 	sed -e 's/@u{\([^}]*\)}//g;' <$< | \
-	@CONVERT_FROM_UTF8@KOI8-U >$@
+	$(CONVERT_FROM_UTF8)KOI8-U >$@
 
 %tex.pl : %utf8.pl $(srcdir)/utf8-to-tex.sed
 	sed -f $(srcdir)/utf8-to-tex.sed <$< >$@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
index e0ce28518a2..36e2d2aa6bb 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/albanian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/albanian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
index ca94a62afd0..c26ac114be4 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/belarusian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/belarusian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
index f1f362053b3..7a8a56eef78 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/bulgarian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/bulgarian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
index 5faa7022c03..4d2f4f64b73 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/croatian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/croatian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
index 8c58fe8181c..ccd42ac3373 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/czech/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/czech
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
index f8d483aacb5..9b5a65ccc88 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/danish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/danish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
index dd3798575ec..64efb76bc2e 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/dutch/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/dutch
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
index d1bda724874..099c26b0cb6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/english/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/english
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
index f046a043850..24cd5ee8dee 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/esperanto/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/esperanto
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
index ae4d3560cfd..f18295dc7dc 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/estonian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/estonian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
index cd882482bc0..f34b85e8dda 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/finnish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/finnish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
index 287c0cf06c3..82f664c103b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/french/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/french
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
index d73e710303e..a29fa794d3f 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/general/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/general
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
index 41b49e2dc11..0ec4f7d2c19 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/georgian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/georgian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
index 27c0fc73838..c3da3792baa 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/german/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/german
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
index ad01d4a9af2..e5151fdf05a 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/greek/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/greek
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
index f93f756d521..02df3fbc8ee 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/gypsy/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/gypsy
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
index ce97d3dccc2..244850da6d1 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hausa/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/hausa
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
index 5283f9428d6..13835650c3f 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hebrew/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/hebrew
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
index 3dc198bde2f..e53e70d09d6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/hungarian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/hungarian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
index 4aa56b1f689..e8dfdc4cdfd 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/icelandic/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/icelandic
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
index d0eedbd3b42..cc9770f03e6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/italian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/italian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
index 3a50867902a..757f2ba03d1 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/klingon/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/klingon
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
index c361c904457..18658ac0d28 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/kurdish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/kurdish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
index dd4673d31f1..bd16794884b 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/latin/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/latin
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
index dd19ad1030d..3e443a064d7 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/latvian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/latvian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
index 1d0322eb2eb..cf477cc9412 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/lithuanian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/lithuanian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
index 0a0f84cb70c..3be885b4d85 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/lower-sorbian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/lower-sorbian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
index e5e8d1b5d0d..fbeb71f749a 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/macedonian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/macedonian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
index 2fdc077c062..35d6d8097b8 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/mongolian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/mongolian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
index 57292c942c1..19b4ec16900 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/norwegian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/norwegian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
index 5eb74d66683..6c94d673f80 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/polish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/polish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
index fa66f0aa640..0d9b45a75fd 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/portuguese/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/portuguese
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
index 250054c9dc7..e65616ae8d4 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/romanian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/romanian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
index 16722b4509b..07a5b7d6e54 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/russian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/russian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
index 73b41726b65..e3f807562bb 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/serbian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/serbian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
index 085d34d296b..8df63c20dbf 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/slovak/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/slovak
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
index a77e2ea6a22..6ace7933eda 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/slovenian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/slovenian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
index 07bf7614f72..730480313c6 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/spanish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/spanish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
index 513caa76a43..09118c66330 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/swedish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/swedish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
index 570b9743e2d..4752d2d909e 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/test1/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/test1
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
index 74c440aa815..244544cc605 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/turkish/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/turkish
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
index 60e1c5c8bd2..e468aaa31a3 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/ukrainian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/ukrainian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
index dae7c52056d..6540b533aef 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/upper-sorbian/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/upper-sorbian
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in b/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
index 2969e1097ba..978a1d0489d 100644
--- a/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/alphabets/vietnamese/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = make-rules/alphabets/vietnamese
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -55,6 +53,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -130,7 +129,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -139,7 +137,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/inputenc/Makefile.in b/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
index 80bad92d798..38733fd60a0 100644
--- a/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/inputenc/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = make-rules/inputenc
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/make-rules/styles/Makefile.in b/Build/source/utils/xindy/make-rules/styles/Makefile.in
index de33640a3db..c4d8bfa7ad6 100644
--- a/Build/source/utils/xindy/make-rules/styles/Makefile.in
+++ b/Build/source/utils/xindy/make-rules/styles/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = make-rules/styles
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/Makefile.in b/Build/source/utils/xindy/modules/Makefile.in
index 1b3cbd74a5b..53537557c34 100644
--- a/Build/source/utils/xindy/modules/Makefile.in
+++ b/Build/source/utils/xindy/modules/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = modules
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -67,6 +65,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -142,7 +141,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -151,7 +149,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/base/Makefile.in b/Build/source/utils/xindy/modules/base/Makefile.in
index 46628e1717a..9a28ca1acc2 100644
--- a/Build/source/utils/xindy/modules/base/Makefile.in
+++ b/Build/source/utils/xindy/modules/base/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/base
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/class/Makefile.in b/Build/source/utils/xindy/modules/class/Makefile.in
index a23ddac9d3d..5184802eb8e 100644
--- a/Build/source/utils/xindy/modules/class/Makefile.in
+++ b/Build/source/utils/xindy/modules/class/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/class
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/lang/Makefile.in b/Build/source/utils/xindy/modules/lang/Makefile.in
index cb7ad8f9574..b2eb96155f5 100644
--- a/Build/source/utils/xindy/modules/lang/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = modules/lang
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -67,6 +65,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -142,7 +141,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -151,7 +149,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/lang/german/Makefile.in b/Build/source/utils/xindy/modules/lang/german/Makefile.in
index df7ec67ea60..cfe6861ba0c 100644
--- a/Build/source/utils/xindy/modules/lang/german/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/german/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/lang/german
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/lang/latin/Makefile.in b/Build/source/utils/xindy/modules/lang/latin/Makefile.in
index bde10ee2b68..e3fe8a3e3a8 100644
--- a/Build/source/utils/xindy/modules/lang/latin/Makefile.in
+++ b/Build/source/utils/xindy/modules/lang/latin/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/lang/latin
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/ord/Makefile.in b/Build/source/utils/xindy/modules/ord/Makefile.in
index ea7c83d522c..debe6c33b85 100644
--- a/Build/source/utils/xindy/modules/ord/Makefile.in
+++ b/Build/source/utils/xindy/modules/ord/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/ord
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/rules/Makefile.in b/Build/source/utils/xindy/modules/rules/Makefile.in
index 160780ddc7c..67603b04e8a 100644
--- a/Build/source/utils/xindy/modules/rules/Makefile.in
+++ b/Build/source/utils/xindy/modules/rules/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/rules
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/modules/styles/Makefile.in b/Build/source/utils/xindy/modules/styles/Makefile.in
index 6ec20b6dde7..c05e5b14b3e 100644
--- a/Build/source/utils/xindy/modules/styles/Makefile.in
+++ b/Build/source/utils/xindy/modules/styles/Makefile.in
@@ -35,10 +35,8 @@ host_triplet = @host@
 subdir = modules/styles
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -65,6 +63,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -140,7 +139,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -149,7 +147,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/rte/Makefile.am b/Build/source/utils/xindy/rte/Makefile.am
index d0fbdd90f25..3b05f54b40b 100644
--- a/Build/source/utils/xindy/rte/Makefile.am
+++ b/Build/source/utils/xindy/rte/Makefile.am
@@ -29,16 +29,16 @@ binariesdir = ../binaries
 
 all-local: $(binariesdir)/$(XINDY_RUN) $(binariesdir)/base.mem
 
-## Serialize to allow parallel builds
-##
+# Serialize to allow parallel builds
+#
 $(binariesdir)/base.mem: $(binariesdir)/$(XINDY_RUN)
 	cp xindy-build-dir/lispinit.mem $(binariesdir)/base.mem
 $(binariesdir)/$(XINDY_RUN):
 	rm -rf xindy-build-dir
 	test -f ordrules/link.sh || for i in $(ORDRULES_FILES); do cp -p $(top_srcdir)/rte/ordrules/$$i ordrules/$$i; done
 	$(MAKE) -C ordrules ordrulei.c
-	env CLISP_LINKKIT='@CLISP_LIB@/linkkit' MAKE="$(MAKE)" \
-	sh '@CLISP_LIB@/clisp-link' add-module-set ordrules '@CLISP_LIB@/full' xindy-build-dir
+	env CLISP_LINKKIT='$(CLISP_LIB)/linkkit' MAKE="$(MAKE)" \
+	sh '$(CLISP_LIB)/clisp-link' add-module-set ordrules '$(CLISP_LIB)/full' xindy-build-dir
 	cp xindy-build-dir/$(LISP_RUN) $(binariesdir)/$(XINDY_RUN)
 
 clean-local:
diff --git a/Build/source/utils/xindy/rte/Makefile.in b/Build/source/utils/xindy/rte/Makefile.in
index 2ad0f7b441f..05ce32729b3 100644
--- a/Build/source/utils/xindy/rte/Makefile.in
+++ b/Build/source/utils/xindy/rte/Makefile.in
@@ -34,10 +34,8 @@ host_triplet = @host@
 subdir = rte
 DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in NEWS
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -67,6 +65,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -142,7 +141,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -151,7 +149,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
@@ -475,14 +472,16 @@ uninstall-am:
 
 all-local: $(binariesdir)/$(XINDY_RUN) $(binariesdir)/base.mem
 
+# Serialize to allow parallel builds
+#
 $(binariesdir)/base.mem: $(binariesdir)/$(XINDY_RUN)
 	cp xindy-build-dir/lispinit.mem $(binariesdir)/base.mem
 $(binariesdir)/$(XINDY_RUN):
 	rm -rf xindy-build-dir
 	test -f ordrules/link.sh || for i in $(ORDRULES_FILES); do cp -p $(top_srcdir)/rte/ordrules/$$i ordrules/$$i; done
 	$(MAKE) -C ordrules ordrulei.c
-	env CLISP_LINKKIT='@CLISP_LIB@/linkkit' MAKE="$(MAKE)" \
-	sh '@CLISP_LIB@/clisp-link' add-module-set ordrules '@CLISP_LIB@/full' xindy-build-dir
+	env CLISP_LINKKIT='$(CLISP_LIB)/linkkit' MAKE="$(MAKE)" \
+	sh '$(CLISP_LIB)/clisp-link' add-module-set ordrules '$(CLISP_LIB)/full' xindy-build-dir
 	cp xindy-build-dir/$(LISP_RUN) $(binariesdir)/$(XINDY_RUN)
 
 clean-local:
diff --git a/Build/source/utils/xindy/rte/ordrules/Makefile.in b/Build/source/utils/xindy/rte/ordrules/Makefile.in
index f58eb740d29..2be01a78817 100644
--- a/Build/source/utils/xindy/rte/ordrules/Makefile.in
+++ b/Build/source/utils/xindy/rte/ordrules/Makefile.in
@@ -37,10 +37,8 @@ subdir = rte/ordrules
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/version.lisp.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -58,6 +56,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -133,7 +132,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -142,7 +140,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/src/Makefile.in b/Build/source/utils/xindy/src/Makefile.in
index d7f50c630de..17e41f18d35 100644
--- a/Build/source/utils/xindy/src/Makefile.in
+++ b/Build/source/utils/xindy/src/Makefile.in
@@ -36,10 +36,8 @@ host_triplet = @host@
 subdir = src
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -57,6 +55,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -132,7 +131,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -141,7 +139,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/tex2xindy/Makefile.in b/Build/source/utils/xindy/tex2xindy/Makefile.in
index 08a3fc44922..33c45ba520a 100644
--- a/Build/source/utils/xindy/tex2xindy/Makefile.in
+++ b/Build/source/utils/xindy/tex2xindy/Makefile.in
@@ -36,10 +36,8 @@ bin_PROGRAMS = tex2xindy$(EXEEXT)
 subdir = tex2xindy
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in tex2xindy.c
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -78,6 +76,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -153,7 +152,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -162,7 +160,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
diff --git a/Build/source/utils/xindy/user-commands/Makefile.in b/Build/source/utils/xindy/user-commands/Makefile.in
index 6d13c8f9b61..34d496578d3 100644
--- a/Build/source/utils/xindy/user-commands/Makefile.in
+++ b/Build/source/utils/xindy/user-commands/Makefile.in
@@ -36,10 +36,8 @@ subdir = user-commands
 DIST_COMMON = $(am__dist_bin_SCRIPTS_DIST) $(dist_noinst_SCRIPTS) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ac_prog_latex.m4 \
-	$(top_srcdir)/m4/ac_prog_pdflatex.m4 \
-	$(top_srcdir)/m4/tl_msg_error.m4 $(top_srcdir)/ac/xindy.ac \
-	$(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \
+	$(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -66,6 +64,7 @@ CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CLISP = @CLISP@
+CLISP_LIB = @CLISP_LIB@
 CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
@@ -141,7 +140,6 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-latex = @latex@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
@@ -150,7 +148,6 @@ mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
 pdfdir = @pdfdir@
-pdflatex = @pdflatex@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@